Respiratory Safety Guide

Transcription

Supplied by Chemiclean Products
Authorised Distributor
Telephone: +44 (0)121-523 8833 / 0121-523 8844
Skype: chemiclean-uk
Fax: +44 (0)121-554 1137
Email: [email protected]
Website: www.chemiclean.co.uk
Quality and Service with a Smile!!!
Supplied by Chemiclean Products
Authorised Distributor
Telephone: +44 (0)121-523 8833 / 0121-523 8844
Skype: chemiclean-uk
Fax: +44 (0)121-554 1137
Email: [email protected]
Website: www.chemiclean.co.uk
Quality and Service with a Smile!!!
ChapSmith LLP is a 21st Century partnership born out of the ashes
of the production, products and certain assets of the former
company Chapman & Smith Ltd.
In conjunction with certain well established European respirator
manufacturers it is intended to form a strategic alliance
to cover all respirator requirements, giving
rise to the slogan:-
“NUNQUAM NON PARATUS”
(NEVER NOT PREPARED)
N
UN
Q
11
UAM
S
TU
RA
A
P
N ON
Contents
Respiratory Protection Requirement
1
Assigned Protection Factors
2
Disposable Masks
3-8
Half Masks
9-14
Full Face Respirators
15-16
Power Dust Caps
17-18
Powered Respirators
19-24
Pressure Breathing Apparatus
25
Respirators for working with Asbestos
26
Respirators for Protection against Viruses, Bacteria and Droplet Pathogens
26
Self Contained Breathing Apparatus
Emergency and Smoke Hood Apparatus
An Aid to Respiratory/Filter Cartridge Selection
27-28
28
29-32
Qualitative Fit Testing
33
Quantitative Fit Testing
34
Product Information and Terms and Conditions
35-36
12
Respiratory Protection Requirement
Respiratory protection is required where the wearer may
encounter one of the following six forms of hazard in the
workplace:
Dust
Formed by the breaking down of solid materials, normally when
materials are altered. For example, sanding, cutting, grinding
and brushing. In general the smaller the dust particle the greater
the hazard that it presents. Fibres from materials should also be
treated as dusts.
Mist
Formed by processes that involve atomisation (such as spraying,
cleaning and cutting/grinding using coolants) and consist of tiny
liquid droplets rather like steam in a bathroom.
Fume
Formed by the vapourisation of a solid material by the application
of intense heat. Extremely fine particulates are formed as the
fume cools and condenses. Many processes form fume; such
as smelting, pouring metals and many welding applications.
Vapour
A gaseous state formed by evaporation from substances that
are normally either solid or liquid at room temperature. Generally
released at room temperature (petrol, methalated spirits), many
industrial processes, used in degreasing vapourise particularly
quickly once heated.
Gas
An air like substance at room temperature. Gases can travel far,
very quickly.
Oxygen Deficiency /Enrichment
When an atmosphere is likely to contain less than 19% oxygen
(or where conditions may exist in the future to cause this to
happen); and in certain circumstances where the risk may be
oxygen enrichment, which can lead to explosion and severe
impairment of operatives.
NOTE: Conventional respirators DO NOT protect the wearer
from this hazard.
CAD drawing of an exhalation valve
1
Assigned Protection Factors
Prior to the purchase of respiratory equipment, a product selection should be carried out by the user or his technical representative
based on a risk assessment of the hazards faced by the user. This risk assessment will take into consideration the level of
protection needed to protect the user in the proposed environment. Once this assesment is carried out the assigned protection
factor can be established.
To determine the required APF (Assigned Protection Factor) it is simply a matter of dividing the measured level of concentration by
the Workplace Exposure Limit (WEL) that the local legislation allows. This calculation will give a required protection factor (RPF),
selection is then just to ensure that the APF for the RPF selected is above that required. If when selecting RPF there is any question,
then a quick call to our Technical Helpline on +44(0)1993 826051 or email [email protected].
Assigned
Protection
Factor
4
10
20
40
1/2 or 1/4 Mask Compressed air line
Plus Filter
EN140
EN270
P1
P2
Gas X
Gas X +P3
Valved Filtering
1/2 Mask
EN405
FMP1
FMP2
FMGas X
FMGas X +P3
Filtering
1/2 Mask
EN149
FFP1
Full FaceMask
Plus Filter
EN136
P1
Powered Filtering:
Helmets & Hoods
EN12941
-
FFP2
P2
TH1 All Face Pieces
P3
FMP3
FFP3
Gas X
Gas X + P3
TH2 All Face Pieces
P3
TH3 Semi-hood, Hood
Blouse, Semi-Blouse
Continuous flow hood
& faceshield
-
-
-
Whether or not a mask/filter/respirator is suitable can be determined by using the following calculation:
Required protection factor (RPF) = Measured level of contamination
For example: RPF = 250mg/m³
Exposure limit for contaminate
RPF =
5
50mg/m³
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wood Hard
Wood soft
White Spirit
Silica
•
•
•
•
•
•
•
•
•
•
•
•
Welding
Plaster
Paint Fume (non isocyanate)
Paint Odour
Mineral Fibres
MDF Power Tools
MDF Hand Tools
Lead Fume
Fibre Glass
Ferros Metal Fume
•
•
•
•
•
Sandstone
•
•
•
•
•
Rockwool
•
•
•
•
•
•
•
Concrete
Class
FFP1
FFP1 Valved
FFP2
FFP2 Valved
FFP2 Odour Valved
FFP3
FFP3
Brick Dust
Therefore a respiratory device with an APF of 10 would be required.
•
•
•
•
•
This guide is produced as an aid to selection of respiratory protective equipment and does not form part of a contract. This information does not release the
user of the duties described by COSHH and other Health and Safety Executive regulations. Its does not over-ride recommendations made in risk assessments
or safety data sheets. This information should not be considered a final or authorative list. JSP Ltd accept no responsibility or liability for loss or injury from the
use of equipment that does not comply with the recommendations made to the user following the required COSHH assessment.
2
CUB SM200 Disposable Comfort Mask
This mask is not classified as a respiratory device and falls outside
of the PPE directive. It should not be used against fine dust, toxic
gases, vapours or paint sprays but only to reduce discomfort
caused by non-toxic particles when the concentration does not
exceed permissible exposure levels.
Whilst not protecting the user against dust, gases, vapours or
paint sprays Comfort Masks do have the application of protecting
items in production from the wearer’s exhaled breath i.e. printed
circut board production etc.
The mask features:
• Adjustable nose clip single headband.
• Suitable for nuisance levels of non-toxic
dust below the WEL only.
• This is not a respiratory protective product.
ORDER REF
PRICE
QTY
PART NO.
SM200
£11.40
50
M05700
Econ Disposable Dust Masks
• The Compliance Mask is a new concept in disposable masks
in that the cradle is plastic and reusable. Simply replace a
used mask with a new one into the cradle.
• A cradle comes with every five mask refills.
• Masks are available to a FFP2 level of protection. Both valved
(ECM2 V) and non-valved (ECM2) versions are available.
• Because the cradle is reusable we are able to offer
these masks at a very competitive price.
ORDER REF
PRICE
QTY
PART NO.
ECM2
£4.00
5
M05750
ECM2V
£5.14
5
M05765
3
CV410-SL Fold Flat Mask
Class FFP1 Approval EN149 2001 (APF 4)
• Low risk hazards where protection factor up to 4 is required.
• Protects against fine dusts, oil and water based mists.
• Non-valved model.
ORDER REF
PRICE
QTY
PART NO.
CV410-SL
£15.60
20
M05840
CV415-SLV Fold Flat Mask
• Use when protection factors above 4 and up to 10 are required.
• One way exhalation valve included for comfort
in hot and humid conditions.
ORDER REF
PRICE
QTY
PART NO.
CV415-SLV
£16.36
15
M05870
CV420-SL Fold Flat Mask
• Use when protection factors
above 4 and up to 10 are required.
ORDER REF
PRICE
QTY
PART NO.
CV420-SL
£18.68
20
M05845
ORDER REF
PRICE
QTY
PART NO.
CV420-SLV
£18.69
15
M05850
4
CV414-SLOV Fold Flat Mask (painting)
Class FFP2 Approval EN 149 2001 (APF 10)
• Use for paint mist and nuisance
odour - activated carbon layer.
• Water repellent covering.
• One way exhalation valve included.
ORDER REF
PRICE
QTY
PART NO.
CV414-SLOV
£31.15
15
M05860
CV425-SLOV Fold Flat Mask (welding)
• Protects against welding fumes and vapours.
• Flame-retardant covering.
ORDER REF
PRICE
QTY
PART NO.
V425-SLOV
£55.12
15
M05865
• Use when protection factors above 10 up to 20 are required.
• Protects against fine dusts, fumes, and oil or water based mists.
ORDER REF
PRICE
QTY
PART NO.
CV430-SLV
£49.89
15
M05855
CM210-SL Moulded Mask
• Low risk hazards where protection factor up to 4 is required.
ORDER REF
PRICE
QTY
PART NO.
CM210-SL
£15.60
20
M05510
5
CM215-SLV Moulded Mask
• Protects against welding fumes and vapours.
• Flame-retardant covering.
ORDER REF
PRICE
QTY
PART NO.
CM215-SLV
£16.36
10
M05520
CM220-SL Moulded Mask
• Use when protection factors
above 4 and up to 10 are required.
ORDER REF
PRICE
QTY
PART NO.
CM220-SL
£18.68
20
M05515
ORDER REF
PRICE
QTY
PART NO.
CM225-SLV
£18.69
10
M05525
• Use when protection factors above 10 up to 20 are required.
• Protects against fine dusts, fumes, and oil or water based mists.
ORDER REF
PRICE
QTY
PART NO.
CM230-SLV
£16.63
5
M05530
6
Flexinet® Disposable Moulded Mask Range
The Flexinet range feature a fabric faceseal that adds extra comfort and sealing providing improved levels
of protection, flexible netting maintains the shape, keeps breathing resistance low and allows the wearer to
see when the mask needs replacing, and a low resistance valve that reduces heat and moisture build.
Flexinet® FFP2 Disposable Mask
• Use when Protection Factors up to 10 are required.
• Protects against fine dust, oil and water based mists.
• Non valved model.
• Two sizes available - code SM means size
small to medium, ML means medium to large.
ORDER REF
PRICE
QTY
PART NO.
F/823VO SM
£19.18
100
10
MO5920
F/823VO ML
£19.18
100
10
MO5925
7
Flexinet® FFP2 Valved Disposable Mask
• Use when Protection Factors up to 10 are required .
• Protects against fine dust, oil, and water based mists.
• Valved model, for extra comfort in hot and humid conditions.
•Two sizes available - code SM means size
ORDER REF
PRICE
QTY
PART NO.
F/822V SM
£25.26
10
100
MO5910
F/822V ML
£25.26
10
100
MO5915
Flexinet® FFP2 Odour Valved Disposable Mask
• Use when Protection Factors up to 10 are required.
• Activated Carbon Layer - protects against paint mists
and nuisance odour.
• Valved Model, for extra comfort in hot and humid conditions.
• Two sizes available - code SM means size
ORDER REF
PRICE
QTY
PART NO.
F/823VO SM
£28.34
10
100
MO5920
F/823VO ML
£28.34
10
100
MO5925
Flexinet® FFP3 Valved 832 Disposable Mask
• High Efficiency (99% minimum) filtering for
protection factors up to 20.
• Valved Model, for extra comfort in hot and humid conditions.
• Features a fully adjustable 4-point harness.
• One size available only.
ORDER REF
PRICE
QTY
PART NO.
F/832V
£16.32
3
MO5930
8
R300 & R300/EH Half Mask Respirator
• Filter holder front mounted.
• Conforms to EN140.
• Single filterversion (supplied wihout filters).
• Standard rubber harness or
Elastic Harness version available (EH)
ORDER REF
PRICE
QTY
PART NO.
R300
£11.23
1
M02600
R300/EH
£11.23
1
M02604
R300/DS & R300/DS/EH Half Mask Respirator
• Filter holder in droop position.
• Single filter version (supplied wihout filters).
• Standard rubber harness or
double elastic head harness with quick release buckle.
ORDER REF
PRICE
QTY
PART NO.
R300/DS
£11.23
1
M02605
R300/DS/EH
£11.23
1
M02606
R300/CH & R300/DS/CH Half Mask Respirator
• Filter holder in normal position (R300/CH) or
droop position (R300/DS/CH).
• Fitted with a flexible cradle head harness
& quick release buckle.
• Single filter version (supplied wihout filters).
ORDER REF
PRICE
QTY
PART NO.
R300/CH
£11.23
1
M02619
R300/DS/CH
£11.23
1
M02618
10
R300/2 Half Mask Respirator
• Twin filter.
• Twin filter recommended in heavy manual work conditions.
• Rigid cradle harness fitted.
• Conforms to EN140 (supplied wihout filters).
ORDER REF
PRICE
QTY
PART NO.
R300
£12.40
1
M02600
R300/TW Twin Backpack Half Mask Respirator
• A unique half mask respirator design with the filter mounted
behind the wearer on the belt, the filter is therefore away from
the immediate area of work where dust and fumes, etc, are
being created.
• Ideal for applications such as under a welding mask.
• Conforms to EN140 (supplied without filters).
ORDER REF
PRICE
QTY
PART NO.
R300
£74.02
1
M02600
11
R310 Pre Filter Pads for 300 Series Respirators
• Spare pre filter pads
(not for use with combination cartridges).
ORDER REF
R310
PRICE
QTY
PART NO.
£5.33
25
M03446
Filter Guide for 300 Series Respirators
CLASS
APPLICATION
STANDARD
STANDARD PRICE
ORDER
ORDER
REF REF
PACK QTY
SIZE
PART NO.
P2
Toxic Dust & Fumes
EN143
EN143
£13.51
R314 R314
5 5
M04501
P3
Toxic Dust & Fumes
EN143
EN143
£30.51
R315 R315
5 5
M04496
A1
Organic Gases & Vapours
EN14387
EN14387
£13.25
R316 R316
5 5
M04511
B1
Inorganic Gases & Vapours
EN14387
EN14387
£23.75
R317 R317
5 5
M04521
K1
Ammonia Vapour
EN14387
EN14387
£20.43
R319 R319
5 5
M04531
A1 P2
Organic Vapours & Dust
EN14387
EN14387
£14.98
R326 R326
3 3
M04541
A1 P3
EN14387
EN14387
£22.74
R336 R336
3 3
M04547
B1P2
Inorganic Vapours & Dusts
EN14387
EN14387
£25.48
R327 R327
3 3
M04561
B1 P3
Inorganic Vapours & Dusts
EN14387
EN14387
£33.24
R337 R337
3 3
M04566
K1 P2
Ammonia Vapour & Dusts
EN14387
EN14387
£22.16
R329 R329
3 3
M04551
K1 P3
Ammonia Vapour & Dusts
EN14387
EN14387
£29.92
R339 R339
3 3
M04553
FILTER TYPE
TYPE
COLOUR CODE
DESCRIPTION
A
Organic Vapours and Gases with boiling point 65°C and above
B
Inorganic Vapours and Gases (excluding Carbon Dioxide/Monoxide)
E
Sulphur Dioxide and Other Acidic Vapours and Gases
K
Ammonia and Ammonia Derivatives Vapours and Gases
ABEK
Combination filter, all of the above
P
Dust/Particle
FILTER TYPE
CLASS
DUST
GAS VAPOUR
1
Low Efficiency
Low Capacity
2
Medium Efficiency
Medium Capacity
3
High Efficiency
High Capacity
12
S230HM Sekur Polimask Silicon Half Mask Respirator
• Top of the range half mask respirator with
Silcon Rubber Face-Piece for extra comfort.
• Protects against a wide variety of dust and
gasses through an extensive range of filter options.
• Droop Snoop Filter position is ideal for users with
spectacles, goggles or facemask.
• Plastic Support cradle and neck strap for
convenience when mask not in use.
• Supplied without Filter - the S230 range of
filters ordered separately.
ORDER REF
PRICE
QTY
PART NO.
S230HM
£24.65
1
M08000
Filter Guide for S230HM Sekur Polimask
CLASS
APPLICATION
APPLICATION
STANDARD PRICEORDERORDER
REF REF
PACK SIZE
STANDARD
QTY
P2
Toxic Dust & Fumes
EN143EN143
£5.08
S230/P2S230/P2
1
1
M08210
P3
Toxic Dust & Fumes
EN143EN143
£6.82
S230/P3S230/P3
1
1
M08211
A1 P2
EN141EN141
£10.03 S230/A2/P2
S230/A2/P2
1
1
M08216
B2 P2
Inorganic Gases & Vapours
EN141EN141
£14.32 S230/B2/P2
S230/B2/P2
1
1
M08209
K2
Ammonia Gases & Vapours
EN141EN141
£9.90
1
1
M08207
S230/K2S230/K2
FILTER TYPE
TYPE
COLOUR CODE
DESCRIPTION
A
B
E
K
ABEK
P
Dust/Particle
FILTER TYPE
CLASS
DUST
GAS VAPOUR
1
Low Efficiency
Low Capacity
2
Medium Efficiency
Medium Capacity
3
High Efficiency
High Capacity
13
PART NO.
R300/40 Half Mask Respirator with 40mm Thread Connection Filters
• Approval EN 140.
• Especially adapted version of the 300 series half mask
respirator that takes the wide range of 40mm thread Dincan
Filters available for the Full Face C700, C607E and C500
masks (see page 15).
• Choice of Filters offers protection against toxic substances,
dust, mists, vapours, organic and inorganic vapours or
compounds, as well as combinations of these hazards.
• Droop Snoop Filter position helps when wearer is using eye
protection or is a spectacle wearer.
• Conforms to EN 140.
ORDER REF
PRICE
QTY
PART NO.
R300/40
£16.80
1
M02650
Filter Guide for R300/40 Series Respirators
CLASS APPLICATION
APPLICATION
STANDARD
STANDARD PRICE
ORDER
ORDER
REF REFQTY
QTY PART
PARTNO.
NO.
A2
Organic Gases
Gases && Vapours
Vapours
Organic
EN141EN141
£7.90
D/230/A2
D/230/A2
1
1
M08227
M08227
B2
Inorganic
Inorganic Gases
Gases && Vapours
Vapours
EN141EN141
£11.18
D/230/B2
D/230/B2
1
1
M08228
M08228
E2
Sulphur
Sulphur Gases
Gases && Vapours
Vapours
EN141EN141
£11.77
D/230/E2
D/230/E2
1
1
M08218
M08218
K2
Ammonia
Ammonia Vapour
Vapour
EN141EN141
£11.77
D/230/K2
D/230/K2
1
1
M08212
M08212
A2 P3
Organic Gases
Gases && Vapours,
Vapours, Dust,
Dust, Fumes
Fumes
Organic
and Mists
Mists Dust
Dust
and
EN141EN141
A2/P3A2/P3
£14.96 D/230D/230
1
1
M08219
M08219
B2 P3
Inorganic Gases
Gases && Vapours,
Vapours, Dust,
Dust, Fumes
Fumes
Inorganic
and
Mists
Dust
and Mists Dust
EN141EN141
B2/P3B2/P3
£16.13 D/230D/230
1
1
M08220
M08220
A2 B2
E2 K1
Organic && Inorganic
Inorganic Gases
Gases && Vapours,
Vapours,
Organic
Sulphur Dioxide,
Dioxide, Ammonia
Ammonia
Sulphur
EN141EN141
ABEK ABEK
£10.76 D/230D/230
1
1
M08224
M08224
A2 B2
E2 K1 P3
Inorganic Gases
Gases && Vapours,
Vapours,
Organic
Sulphur Dioxide,
Dioxide, Ammonia
Ammonia and
and Dusts
Dusts
Sulphur
EN141EN141
ABEK ABEK
P3 P3 1
£14.30D/230D/230
1
M08225
M08225
A2 B2
Inorganic Gases
Gases && Vapours
Vapours
Organic
EN141EN141
A2 B2A2 B2
£12.46 D/230D/230
1
1
M08231
M08231
AX
Gases
Gases && Vapours
Vapours of
of low
low boiling
boiling point
point
Organic
Organic Compounds
Compounds
EN371EN371
£11.18
1
1
M08226
M08226
AX P3
Gases
Gases && Vapours
Vapours of
of low
lowboiling
boilingpoint
pointOrganic
Organic
Compounds.
Compounds. plus
plus Dusts,
Dusts, Fumes
Fumes && Mists
Mists
EN371EN371
£16.13 D/230D/230
AX/P3AX/P3
1
1
M08217
M08217
P3
Protection
Dust Dust
Protection against
against finely
finely divided
divided Toxic
Toxic Dusts,
Dusts, High Efficiency
High Efficiency
£6.79
Fumes
FiltersFilters
EN143EN143
Fumes && Mists
Mists
1
1
M08229
M08229
D/230D/230
AX AX
D/230D/230
P3 P3
14
Sekur C700 ‘SFERA’ Wide Angle Extra Full Vision Full Face Mask Respirator
• Approval EN 136: 1998 Class 3.
• This top of the range model offers extra visibility to the
wearer, in fact covering 85% of the natural field of vision.
Not only does this increase wearer safety but
reduces any sence of claustrophobia.
• Synthetic face piece designed to draw inhaled air
across the visor to prevent misting.
• Fitted with frontal speech diaphram, 5 strap fully adjustable
head harness and neckstrap.
• Spare Visors
ORDER REF
PRICE
QTY
PART NO.
C700
£115.12
1
M07060
Polycarbonate Visor
£42.23
1
M07062
Visor Protectors
£20.93
10
M07069
Carry Case
£63.10
1
M07070
Sekur C607E & Sekur ‘selecta’ C500 Full Face Mask Respirator
• Approval EN 136: (Class 2).
• Highly popular full face model with
conventional visor and frontal speech diaphram.
• As with all models features synthectic face piece
and inner ori-nasal mask preventing misting.
• Five strap harness and neck strap allowing
respirator to ‘hang’ on the users chest when not in use.
• C500 model is the economy version with all of the same
features minus a speech diaphram and neck strap.
• Spare Visors
ORDER REF
PRICE
QTY
PART NO.
C607E
£94.68
£88.90
1
M07015
C500
£79.61
1
M07080
Polycarbonate visor
£14.00
1
M07432
Triplex Visor
£104.74
1
M07436
Visor Clamps
£10.97
£10.30
1
M07435
Harness
£23.43
1
M07406
Neck Strap (For C607E only)
£4.79
1
M07407
Carry Case
£27.26
1
M07437
15
Filter Guide for Sekur Full Face Masks Respirators
CLASS APPLICATION
APPLICATION
STANDARD
STANDARD PRICE
ORDER
ORDER
REF REFQTY
QTY PART
PARTNO.
NO.
A2
Organic
Organic Gases
Gases && Vapours
Vapours
EN141EN141
£7.90
D/230/A2
D/230/A2
1
1
M08227
M08227
B2
Inorganic
Inorganic Gases
Gases && Vapours
Vapours
EN141EN141
£11.18
D/230/B2
D/230/B2
1
1
M08228
M08228
E2
Sulphur
Sulphur Gases
Gases && Vapours
Vapours
EN141EN141
£11.77
D/230/E2
D/230/E2
1
1
M08218
M08218
K2
Ammonia
Ammonia Vapour
Vapour
EN141EN141
£11.77
D/230/K2
D/230/K2
1
1
M08212
M08212
A2 P3
Organic
Organic Gases
Gases && Vapours,
Vapours, Dust,
Dust, Fumes
Fumes
and
and Mists
Mists Dust
Dust
EN141EN141
£14.96 D/230D/230
A2/P3A2/P3
1
1
M08219
M08219
B2 P3
Inorganic
Inorganic Gases
Gases && Vapours,
Vapours, Dust,
Dust, Fumes
Fumes
and
and Mists
Mists Dust
Dust
EN141EN141
£16.13 D/230D/230
B2/P3B2/P3
1
1
M08220
M08220
A2 B2
E2 K1
Organic
Inorganic Gases
Gases && Vapours,
Vapours,
Sulphur
Sulphur Dioxide,
Dioxide, Ammonia
Ammonia
EN141EN141
£10.76 D/230D/230
ABEK ABEK
1
1
M08224
M08224
A2 B2
E2 K1 P3
Organic
Inorganic Gases
Gases && Vapours,
Vapours,
Sulphur
Sulphur Dioxide,
Dioxide, Ammonia
Ammonia and
and Dusts
Dusts
EN141EN141
£14.30D/230D/230
ABEK ABEK
P3 P3 1
1
M08225
M08225
A2 B2
Organic
Inorganic Gases
Gases && Vapours
Vapours
EN141EN141
£12.46 D/230D/230
A2 B2A2 B2
1
1
M08231
M08231
AX
Gases
Gases && Vapours
Vapours of
of low
low boiling
boiling point
point
Organic
Organic Compounds
Compounds
EN371EN371
£11.18
1
1
M08226
M08226
AX P3
Gases
Gases && Vapours
Vapours of
of low
lowboiling
boilingpoint
pointOrganic
Organic
Compounds.
Compounds. plus
plus Dusts,
Dusts, Fumes
Fumes && Mists
Mists
EN371EN371
£16.13 D/230D/230
AX/P3AX/P3
1
1
M08217
M08217
P3
Protection
Protection against
against finely
finely divided
divided Toxic
Toxic Dusts,
Dusts, High Efficiency
High Efficiency
Dust Dust
£6.79
Fumes
Fumes && Mists
Mists
FiltersFilters
EN143EN143
1
1
M08229
M08229
D/230D/230
AX AX
D/230D/230
P3 P3
FILTER TYPE
TYPE
COLOUR CODE
DESCRIPTION
A
B
E
K
ABEK
P
Dust/Particle
FILTER TYPE
CLASS
DUST
GAS VAPOUR
1
Low Efficiency
Low Capacity
2
Medium Efficiency
Medium Capacity
3
High Efficiency
High Capacity
16
The Aircap Powered Anti Dust Cap Range
• The Aircap is a lightweight pressure respirator designed to protect the user from Dust and most other
Airborne Particulates to EN12941 TH1P.
• Ideal for use during warm dusty jobs where FFP2 protection is required with an A.P.F of 10.
• IMPACT models provide bump cap head protection to EN 812 and impact visor protection to EN 166 1.B.
• High Capacity pleated filter cartridges outlast disposable masks, and a flow gauge included in the
package enables the user to determine when the filter becomes blocked and needs changing.
• Battery choice [Aircap2&3] of rechargeable or conventional C cell batteries.
• Fully adjustable for head size.
• No breathing resistance to the lungs therefore more comfortable than other particulate masks.
Filters Pre Filters for Aircap Models 2, 3, 4
ORDER REF
ACF
PRICE
QTY
PART NO.
£9.88
10
MBW3003
Peel off visor for Aircap Models 2, 3, 4
ORDER REF
ACVP
17
PRICE
QTY
PART NO.
£9.38
10
MBW3008
Aircap 2 Powered Anti Dust Cap
• Protection against toxic dusts to TH1P(Equal to FFP2)(APF10).
• Ultra lightweight, cooling airflow.
• Rechargeable or high capacity C-cell batteries.
• Lightweight non-impact Visor.
• Replaceable high efficiency particle filters.
• Aircap 2 pack contains UK plug and charger, flow meter,
filters, power unit, non-impact visor.
ORDER REF
PRICE
QTY
PART NO.
Aircap 2 C-Cell
£123.00
1
MBW1001
Aircap 2 8 Hr Rechargeable
£144.73
1
MBW1001UK
Aircap 3 Impact Powered Anti Dust Cap
• Visor and Bumpcap Protection to EN166 1B.
• An integrated solution to head eyes and lungs protection.
• Rechargeable or high capacity C-cell batteries.
• Aircap 3 pack contains UK plug and charger, flow meter,
filters, power unit, impact visor and bumpcap.
ORDER REF
PRICE
QTY
PART NO.
Aircap 3 C-Cell
£133.38
1
MBW2001
Aircap 3 8 Hr Rechargeable
£163.80
1
MBW2003UK
Aircap 4 Lite/IP(Impact) Powered Anti Dust Cap
• Integrated Lithium Ion Battery in the back of the cap with no
trailing leads, with a run time of 4-6 hours before recharging.
• Aircap 4 pack contains integrated batteries, charger filters.
• Aircap 4 Lite IP (Impact powered version) is fitted with
impact visor protection to EN166 1B
ORDER REF
PRICE
QTY
PART NO.
Aircap4 Lite
£159.54
1
MBW2005
Aircap4 IP (Impact)
£170.40
1
MBW2006UK
18
CAB-B Clean-air® Dual Flow Air Filter Unit
• Comes complete with a single, easily replaceable P3 particle
filter to provide protection against solid and liquid particles.
• The unit can be operated in ‘ECO’ or ‘TURBO’ mode providing
flow rates of either 160 or 210 I/min.
• Batteries and charger provide between 6 and 9 hours of
continuous use depending upon operating mode used.
• Air flow indicator included.
• Certification EN 12941 TH1 PSL.
ORDER REF
PRICE
QTY
PART NO.
CAB-B
£285.86
1
M40150
CAB-FC Clean-air® Flow Control Air Filter Unit
• Comes complete with a single, easily replaceable P3 particle
filter to provide protection against solid and liquid particles.
• Offers 8 air flow levels selected on a LED control panel.
• Control panel also shows battery voltage and filter capacity.
• Flow rates provided range between 140 and 210 I/min, with
warning signals to show when the flow rate drops below 140.
• Comes complete with batteries and charger that provide
between 6 and 9 hours of continuous use.
• Certification EN 12941 TH2/TH3 PSL.
ORDER REF
PRICE
QTY
PART NO.
CAB-FC
£313.43
1
M40155
Clean-air® Particulate Filter Units i.e. CAB B, CAB FC
• All include belt air, hose, battery, battety charger and filter.
Circular Replacement Particle Filter for CAB B and CAB FC Systems
• Class P3.
• Fits CAB B and CAB FC systems only (not chemical systems).
• Protection against liquid or solid areosols,
toxic dust and smoke.
ORDER REF
PRICE
QTY
PART NO.
CP-2 Particle Filter
£11.68
1
M40100
PF-2 Pre Filter
£6.93
10
M40105
OF-2 Odour Filter
£10.56
10
M40110
19
Pre-Filter PF-2
Odour Filter OF-2
CAC Clean-air® Chemical Flow Control Unit
• A full range of canister type filters are available for protection
against dusts, gases or a combination of both.
• A control panel on the unit enables the user to choose 8 air
flow levels appropriate for the choice of hood or mask, each
with 8 airflow levels up to 160 I/min.
• Acoustic and visual alarm for low battery or blocked filters.
• Batteries and charger provide between 4 and ten hours of
continuous use dependant upon chosen operating mode.
• See chart on following page for EN12 941 Approvals rating.
• Certification EN12941, EN12942.
ORDER REF
PRICE
QTY
PART NO.
CAC-FC
£413.85
1
M40520
Clean-air® Chemical Units CAC
• Include super comfort belt, air hose, battery charger, and battery.
CAC Clean-air® Filters (always use 3 filters of the same type and class)
ORDER REF
PRICE
QTY
PART NO.
MF P3
(Protection against toxic dusts
and fumes)
£6.37
1
M09520
MF A2
(Protection against organic gases
and vapours)
£9.78
1
M09521
MF A2 P3
(Protection against organic gases
and vapours, and dusts)
£11.79
1
M09522
MF ABEKP3(Protection
ABEKP3 (Protectionagainst
againsttoxic
toxicdusts
dusts
and fumes, organic and inorganic gases,
sulphur dioxide, and ammonia vapour)
£16.77
1
M09523
EN12941 Class TH Approvals Chart
HOOD OR HELMET
TH CLASS APPROVALS RATING
Air Filter Unit
CA-1
CA-2
CA-3
CA-4
CA-21
CA-22
CAB B
TH-1
TH-1
TH-1
TH-1
TH-1
TH-1
CAB FC
TH-2
TH-2
TH-2
TH-2
TH-2
TH-2
CAC FC
TH-2
TH-2
TH-2
TH-2
TH-2
TH-2
20
Clean-air® Respirator Systems with Hood Type CA-1
• Extremely light hood, ideal for long periods of use.
• One size fits all sealing around front half of head and face.
• Air flow plus special antifog treatment
prevents visor from misting.
• Popular for a wide range of non-impact applications.
• CAB-1B and CAB-1FC versions ready for ‘out of the box’ use.
ORDER REF
PRICE
QTY
PART NO.
CA-1 Hood only
£27.41
1
M09460
CAB-1B Filter unit, filter and hood
(Class TH1 PSL, toxic dusts only)
£313.27
1
M40005
CAB-1FC Filter unit, filter and hood
£340.84
1
M40010
CAC-1FCV Filter unit and hood
(Class TH2, gas/vapour and toxic dusts)
£441.26
1
M40500
Clean-air® Respirator Systems with Hood Type CA-2
• Light hood but with cape to give protection
to head and shoulders.
• One size fits all sealing around head and face.
• Air flow plus special antifog treatment prevents
visor from misting.
• Non impact applications.
• CAB-2B and CA2FC versions ready for ‘out of the box’ use.
ORDER REF
PRICE
QTY
PART NO.
CA-2 Hood only
£35.50
1
M09461
£319.37
1
M40015
£346.93
1
M40020
£447.41
1
M40501
21
Clean-air® Respirator Systems with Grinding Helmet Type CA-3
• Grinding Helmet system with Browgard and
polycarbonate face shield giving impact
protection to EN1661.3 B.9.
• Adjustable elasticated face seal.
• CAB-3B and CAB-3FC versions ready for ‘out of the box’ use.
ORDER REF
PRICE
QTY
PART NO.
CA-3 Headpiece only
£106.23
1
M09462
CAB-3B Filter unit, filter and helmet
£372.93
1
M40025
CAB-3FC Filter unit, filter and helmet
£400.49
1
M40030
CAC-3FCV Filter unit and helmet
£500.91
1
M40502
Clean-air® Powered Air Helmet CA-4
• Designed to work with Flow control/dual flow
particulate units and chemical filter unit.
• HDPE industrial safety helmet to EN397 for protection
against falling hazards with sealed visor.
• Conforms to BS EN 12941:1999 TH2.
• Polycarbonate visor gives protection
to EN 166.1.B.3.9.
ORDER REF
PRICE
QTY
PART NO.
CA-5 Headpiece
£86.97
1
M09459
22
Clean-air® Respirator Systems with Welding Hood CAB-21
• Welding system with flip up visor, complete with welding lens EW11 - 60 X 110mm.
• Alternative lens shades available, EW9-12, as well as anti-spatter lenses and protection plates.
• Filtered air feeds through a plastic duct down into the visor, with an adjustable elasticated face seal.
• Proban fire resistant hose cover included.
ORDER REF
PRICE
£385.96
£413.64
£517.13
QTY
PART NO.
1
M40050
1
M40045
1
M40505
CA-27 Proban Hosecover
£8.05
1
M09474
EW9 Lens
£16.70
10
M09483
EW10 Lens
£16.70
10
M09480
EW11 Lens
£16.70
10
M09481
EW12 Lens
£16.70
10
M09482
Anti-Spatter Lens
£16.60
10
M09479
Kempi Welding Hood CA-22
• Compatable with all 3 power filter units
- Clean - Air Basic, Dual flow, Clean-air® Basic Flow Control, Clean-air® Chemical.
• Available with a choice of autodarkening cassettes or large fixed welding filters 110x90cm .
• Two Stage flip up window and fitted with a clear polycarbonate lens behind
the welding filter for protection during grinding, and giving clear
visibilty for checking and other operations.
• The visor has a thickened rim for extra heat insulation.
• Proban fire resistant hose cover included.
ORDER REF
PRICE
QTY
PART NO.
CAC-22 Head Unit
£166.40
1
M40340
£418.45
1
M40165
£446.01
1
M40170
£546.48
1
M40509x
23
Optional Auto Darkening Filters for Kempi Welding Hood CA-22
CA-ADF-F11
• Auto darking lens.
• Fixed shade.
CA-ADF-V9/13
• Auto darking filter.
• Variable shades 9-13.
ORDER REF
PRICE
QTY
PART NO.
CA-ADF-F11
£186.46
1
M40355
CA-ADF-V9/13
£247.91
1
M40360
Clean-air® 22 Pressure Breathing Apparatus
• The Pressure Breathing Apparatus provided by ChapSmith is designed for users who
require to use an independent compressed air supply.
• The full range of face shields, hoods, an helmets as per the Powered respirator
range, shown below, can be used with the Clean-air® Pressure Waist Belt
and valve for independent compressed air applications.
• Approval: EN 1835.
• The appropriate components are shown here
and detailed on the following page.
24
Clean-air® Pressure Waist Belt
• Connects the hose leading from the hood, face-shield, or
helmet of choice above, to the air supply hose coming from
the Air-Line Filter Unit (CAP 50).
• Adjustable flow control valve.
• Quick Release buckle on belt.
• Can be used with all Clean-air® products from page 21 to 24
ORDER REF
PRICE
QTY
PART NO.
CAP - 90
£97.29
1
M09492
Clean-air® Pressure Connecting Hose
• Connects the air-supply from the Air-Line Filter Unit
(CAP-50). to the waist belt (CAP-90).
• 10 meter length.
• Complete with CEJ connectors.
ORDER REF
PRICE
QTY
PART NO.
CAP - 30
£25.29
1
M09492
Clean-air® Pressure Air Line Filter Unit and Connecting Hose
• Removes liquids, oil vapour, solid contaminants
and odours from the air supply.
• Easily changed filters.
• Integral indicator for pressure drop located on the top of unit.
ORDER REF
PRICE
QTY
PART NO.
CAP - 50
£201.29
1
M09492
25
Clean-air® Asbestos Protection Respirators: Asbest System 1/Asbest System 2
Asbest System 1 (SY 1) EN12942/TM3
• Filter and turbo unit worn on a belt behind the
user delivering filtered air to the face piece via a hose.
• System supplied with full face mask, turbo unit, P3
exchangeable filter, batteries and charger, hose and belt.
Asbest System 2 (SY 2) EN12942/TM3
• Turbo unit and filter mounted directly onto the mask.
• System supplied with full face mask, turbo unit, P3
exchangeable filter, batteries and charger.
• Standard Systems (CA-AS/SY1 & CA-AS/SY2)
use the C500 ‘Selecta’ Neoprene Mask (see page 15).
• Also available is a anti-allergenic silicone mask,
again the turbo unit can be belt or face mounted
(CA-AS/1 Silicone and CA-AS/2 Silicone).
• Both Masks conform to EN 148-1.
ORDER REF
PRICE
QTY
PART NO.
CA-AS/SY1
£459.81
1
M40270
CA-AS/SY2
£420.57
1
M40280
CA-AS/1 Silicone
£534.36
1
M40200
CA-AS/2 Silicone
£495.11
1
M40250
Clean-air® Medical Powered Respirator
• Designed to provide respiratory protection against infections transmitted
by airborne particles (viruses, bacteria, and droplet pathogens).
• Obvious applications are in laboratories, health care facilities and rescue services.
The system is designed to be very easy to use and ready at hand.
• The protective hood covers the complete head with a large clear visor.
• Respiratory Device - Consists of a waist mounted lightweight filter unit and
air-hose and provides an airflow of 160 L/Min. Powered with a rechargeable
Li-Ion batteries capable of running for 5 hours, and taking 5 hrs to recharge.
• Filter - efficiency at least 99.99%. HPEA Filter captures solid and
liquid aerosols including fine particles.
• Cleaning - After use the unit can be cleaned by disinfection agents
such as formaldehyde or by ultrasound devices.
• EN12941:1998
ORDER REF
PRICE
QTY
PART NO.
CAM
£432.92
1
M40260
26
Diablo Self Contained Breathing Apparatus
Two models of the Diablo Self contained Breathing apparatus are available:
• The Diablo ‘Industrial’ Unit uses a modified version of the Sekur C607 Full face mask (see page 15).
• The Diablo Professional Unit a more substantial carrying unit and features the SFERA
Wide Agle C700 Full face mask (see page 15)
Diablo Industrial Breathing Apparatus
• Diablo industrial breathing Apparatus comes complete with
C607 SP/A positive pressure full face mask.
• Excludes cylinders.
• EN137
ORDER REF
PRICE
QTY
PART NO.
DAI-I (Industrial)
£988.11
1
M09611
Diablo Proffessional Breathing Apparatus
• Diablo proffessional breathing Apparatus comes complete
with heavier weight carry frame and C700 SP/A
positive pressure full face mask.
• Excludes cylinders.
• EN137
ORDER REF
PRICE
QTY
PART NO.
DIA-P (Professional)
£1114.04
1
M09610
27
Diablo - PL Escape Apparatus
• The Emergency Escape Set complies with EN 137.
• Supplied complete in a fireproof heat deflecting cylinder
holding bag with a high visibility luminous stripe.
• Unit goes to positive pressure mode upon first breath taken.
• Stand-by button fitted to conserve air during
fitting or removing the set.
• Warning device with an audible signal when the
pressure drops below a set value.
• Cylinder (SUPPLIED EMPTY) capacity 600 litres/15mins.
• Provides Protection and Emergency Escape from
toxic or oxygen deficient atmospheres.
ORDER REF
PRICE
QTY
PART NO.
DIA-PI
£507.47
1
M09600
CYL3 (cylinder supplied empty)
£174.34
1
M90603
M09603
Smoke Hood 60
• The Smoke hood 60 is approved and CE Marked to EN403
the European Standard regulating Smoke hood devices.
• This Standard requires the unit to effectively filter, for in
excess of 15 mins,the most toxic gasses produced by fires.
• These gasses include, carbon monoxide, acrolein,
hydrogen chloride, and hydrogen cyanide.
• Under test the Smoke hood 60 is four times more
effective than the standard.
• Single use only the Smoke hood 60 comes vacuum
packed in a wall-mounted plastic case, with a
ring top release for instant access.
• Instructions provided.
Open the unit only when intended for use.
ORDER REF
PRICE
QTY
PART NO.
SM/60
£76.57
1
MBW1105
28
Acetaldehyde*
AX
• •
Acetic acid
A
Acetic anhydride
Air Line B.A.
Full Face
Mask
Half Mask
One Shift
Disposable
Pariculate
Gas/Vapour
CEN Colour
• • •
Butane
•
Acetone*
AX
• •
Butylene
•
Acetonitrile
A
• • •
•
B/E
• • •
Acrolein
A
Acrylate & derivatives
A
P
• • •
Acr ylonitrile
A
P
• • •
Alcohols (in general)
A
• • •
Aldehydes (in general)
A
• • •
Allyl chloride
A
• • •
Ammonia
K
• • •
Amyl acetate
A
• • •
Aniline
A
P
• • •
Antimony & compounds
P
• • • •
Arsenic trioxide & pentoxide
P
• • • •
Arsine (hydrogen arsenide)
• • •
B
Asbestos
P
Toxic or Noxious Substance
• • •
P
•
• •
Carbon black & Coal dust
Camphor
Benzene (Benzol) & derivatives
Air Line B.A.
Full Face
Mask
Half Mask
One Shift
Disposable
Pariculate
CEN Colour
Gas/Vapour
A
• • • •
P
• • •
•
• •
Carbon Monoxide
Carbon Disulphide
B
• • •
Carbon Tetrachloride
A
• • •
Chlorine
B
• • •
Chlorine Dioxide
B
• • •
Chloracetic acid
A
Chloroacetone
A
Chloroacetophenone (CAF)
Chorobenzine (Chlorobenzol)
Chlorobenzybidene Matontrile (CS)
A/B
P
• • • •
P
• • •
• • •
A
A/B
• • •
P
• •
• • •
A
Chlorodifluoromethane
•
Chlorofluoromethane
•
• • •
Chloroform (Trichloromethane)
Benzyl bromide
B/A
P
• • •
Chloromethane
Benzyl chloride
B
P
• • •
Chloronitropropane
P
• • • •
Berylium
P
Carbon Dioxide
Chloro Bromomethane
A
Air Line B.A.
A
Full Face
Mask
• • •
Half Mask
A
One Shift
Disposable
Butyl acetate
Pariculate
• • •
Gas/Vapour
• • •
CEN Colour
A
Acid (conc. fumes)
An Aid to Respirator/Filter Cartridge Selection
Respirator Type
Butanone
Acetylene
29
Filter Type
Air Line B.A.
Half Mask
Full Face
Mask
Respirator Type
One Shift
Disposable
Pariculate
Gas/Vapour
CEN Colour
Filter Type
• • •
A
•
• • •
A
•
Chloropentafluoroethane
• • •
Choropicrin (Trichloronitomethane)
A
• •
• • •
Chloroprene
A
• • •
A
• • •
Chlorosulphuric acid
B
Bromomethane*
AX
• •
Bromotoluene
B/A
Bromine
B
Bromoacetone
A
Bromoforn (Tribromomethane)
Butanol
A
P
P
P
• • •
•
Chlorotifluoromethane
• • •
Cresols
A
P
• • •
• • •
Cyanogen Chloride
B
P
• • •
Air Line B.A.
Half Mask
Full Face
Mask
One Shift
Disposable
Gas/Vapour
Pariculate
CEN Colour
Air Line B.A.
Full Face
Mask
Ethyl Formate*
AX
• •
Fluoride Dust
P
Air Line B.A.
• • •
Full Face
Mask
• •
Half Mask
AX
One Shift
Disposable
Ethylene Oxide*
Pariculate
• • •
Gas/Vapour
One Shift
Disposable
Pariculate
Half Mask
• • •
CEN Colour
A
Air Line B.A.
A
Respirator Type
Ethylene Dibromide
Full Face
Mask
Cyclo Hexanone
P
Filter Type
• • •
Half Mask
A
Respirator Type
One Shift
Disposable
Cyclo Hexanol
Gas/Vapour
A
CEN Colour
Cyclo Hexane
Pariculate
Gas/Vapour
CEN Colour
• • • •
Diacetone Alcohol
A
• • •
1, 1 & 1, 2 Dichloroethane*
AX
• •
Fluorine
B
• • •
1, 2 Dichloroethane*
AX
• •
Formaldehyde
B
• • •
Dichloroethyl Ether
A
Formic Acid
B
Dichloromethane (Meth. Chlor)*
AX
• •
1, 1 Dichloro 1 Nitroethane
A
Dichloropropane (Prop. Chlor)
• • •
P
• • •
P
A
• • •
Diethylamine & Ethylamine
K
• • •
Furfuryl Alcohol
A
• • •
Diethyl Ether (Ethyl Ether)*
AX
• •
Dimethyformamide
A
• • •
Dimethyhydrazine
K
• • •
Dioxane (Diethylene Dioxide)
A
• • •
Air Line B.A.
Full Face
Mask
Half Mask
One Shift
Disposable
Esters (in general)
Pariculate
P
• • •
A
Gas/Vapour
A
Gasoline
CEN Colour
Epichlorohydrin
Air Line B.A.
Furfural
Full Face
Mask
• • •
Half Mask
A
One Shift
Disposable
Dichloropropane
Pariculate
•
Gas/Vapour
Freon 11 (Fluoroticloro Methane)
CEN Colour
• • •
Air Line B.A.
A
Full Face
Mask
•
Half Mask
Freon 12 (Dichloro Difluoro Methane)
One Shift
Disposable
• • •
Pariculate
•
Gas/Vapour
Freon (in general)
CEN Colour
IMPORTANT NOTE: It is the USERS responsibility to ensure that Protective Equipment is suitable and adequate for use in the
intended hazardous enviroment.
* Chemicals marked with this asterisk are liable to disorb; cartridges must only be used once and then discarded.
Filter Type
• • •
Halocarbons (in general)
A
• • •
A
• • •
Halogens (in general)
B
• • •
Ethanol (Ethyl Alcohol)
A
• • •
Hexachlorocyclohexane
Ethanolamine
A
• • •
Hydrazine
K
• • •
Esters (in general)*
AX
• •
Hydrocarbons (in general)
A
• • •
Ethyl Acetate (Acetic Ether)
A
• • •
Hydrochloric Acid
B/E
P
• • •
Ethyl Acrylate (Acrylic Ester)
A
• • •
Hydrogen Chloride
B/E
P
• • •
Ethylbenzene
A
• • •
Hydrogen Bromide
B/E
P
• • •
Ethyl Bromide
A
• • •
Hydrogen Cyanide
B
P
• • •
Ethyl Chloride*
AX
• •
Hydrogen Fluoride
B
P
• • •
Hydrogen Iodide
B
P
• • •
Ethylene
•
A/B
P
• •
30
Hydrogen Peroxide
Air Line B.A.
• • • •
Full Face
Mask
P
Half Mask
• • • •
One Shift
Disposable
P
Pariculate
Metallurgical Fumes (in general)
Gas/Vapour
•
CEN Colour
• • •
Metal Oxides (solid particles)
Hydrogen Sulphide
B
• • •
Methane
Hydroquinone & Quinone
A
• • •
Methyl Alcohol*
AX
• •
Methyl Bromide (Bromomethane)*
AX
• •
• • •
Iodine
BE
P
• •
Iodomethane (Methyl Iodide)*
AX
Full Face
Mask
P
Half Mask
A
One Shift
Disposable
Pariculate
Insecticides (Pesticides)
• •
P
• • • •
•
Iron Pentacarbony
Methylethylketone (MEK), Buthanone
A
• • •
•
Methyl Formate
Methyl Isobutyl Ketone
• • •
A
• •
Methyl Isocyanate
Methyl Iodide*
• •
AX
• • •
B
P
• • •
Lindane
A
P
• • •
•
Liquified Petroleum Gases
Air Line B.A.
Full Face
Mask
• • •
•
Nickel Carbonyl
Nitric Acid
E
P
• • •
Nitric Oxides (Nitrous Vapours)
No
P
• •
Nitrobenzene (Nitrobenzo)
A
P
• • •
Nitroethane
B
P
• • •
Nitroglycerin
B
Nitromethane
A
P
• • •
Nitropropane
A
P
• • •
Nitrotoluene
A
P
• • •
• • •
• • •
Air Line B.A.
Half Mask
Pariculate
P
One Shift
Disposable
Gas/Vapour
A
Maleic Anhydride
A
P
• • •
Orthodichlorobenzene
A
• • •
Mercaptans (in general)
B
P
• • •
Oxalic Acid
Mercury & its compounds
Hg
P
• •
Ozone
P
A
Full Face
Mask
• • •
Half Mask
A
One Shift
Disposable
Organic Vapours (in general)
CEN Colour
• • •
Full Face
Mask
P
Half Mask
A
One Shift
Disposable
Malathion
CEN Colour
Pariculate
P
Naphtalene (Naphtalin)
Gas/Vapour
A
Air Line B.A.
P
Lewisite
Lubricant Oils Gases & Fumes
• • •
Pariculate
Air Line B.A.
Full Face
Mask
One Shift
Disposable
Pariculate
Gas/Vapour
Lead Fumes
Half Mask
• • •
A
CEN Colour
Ketones (in general)
A
Gas/Vapour
•
Ketene
Air Line B.A.
Full Face
Mask
Half Mask
Methyl Chloroform (Trichlomethane)
• • •
One Shift
Disposable
A
•
Methyl Chloride (Chloromethane)
• • •
P
Pariculate
Isopropyl Alchol
Gas/Vapour
A
CEN Colour
Isocyanates (Organic - in general)
•
CEN Colour
CEN Colour
Gas/Vapour
P
Air Line B.A.
B
Iron Oxide (fumes)
An Aid to Respirator/Filter Cartridge Selection
Respirator Type
Hydrogen Selenide
31
Filter Type
Air Line B.A.
Full Face
Mask
Half Mask
Respirator Type
One Shift
Disposable
Pariculate
Gas/Vapour
CEN Colour
Filter Type
• • • •
• • •
Respirator Type
Pentachloroethane
A
• • •
Sulphuric Acids & Sulfur Trioxide
E
Perchloroethylene (Tetrachlorethy.)
A
• • •
Sulphuryl Chloride & Fluoride
B
Petroleum (vapours)
A
• • •
Phenol
A
P
• • •
Phenylhydrazine
AK
P
• •
Phosgene & Disphosgene
B
P
• • •
Tetrachloroethane
A
Phosphine (Hydrogen Phosphide)
A
P
• • •
Tetraethyl Lead
A
P
• • • •
Tetrahydrofuran
A
P
• • •
Tetramethyl Lead
A
P
• • •
P
• • • •
Thiokol
A
P
• • •
A
Phosphoric Acids
A
Phosphorus (yellow)
Phosphurus Pentoxide
B
P
• • •
Toluene (Toluol)
Phosphorus Oxychloride
B
P
• • •
Toluene 2, 4 Di-Isocyanate (TDI)
Phosphorus Pentachloride
B
• • •
Air Line B.A.
Full Face
Mask
Half Mask
One Shift
Disposable
Gas/Vapour
CEN Colour
Pariculate
• • •
• • •
P
• • •
• • •
• • •
Trichloropropane
A
• • •
A
P
• • •
Trifluorobromomethane*
AX
• •
P
• • • •
Turpentine
A
• • •
P
• • •
Air Line B.A.
Half Mask
• • •
Vinyl Chloride*
AX
• •
Vinylidene Chloride*
AX P3
• •
1, 2 Dichloroethylene
A
• • •
Vinyl Toluene
A
• • •
A
• • •
Styrene
A
• • •
Xylene (Xylol)
A
Air Line B.A.
Solvents (in general)
Full Face
Mask
• • • •
Half Mask
Air Line B.A.
Full Face
Mask
Half Mask
A
One Shift
Disposable
Full Face
Mask
Half Mask
One Shift
Disposable
Pariculate
P
• • • •
Vinyl Acetate
Pariculate
Sodium Hydroxide
Pariculate
P
Gas/Vapour
Quartz (Silica) Particles
• • • •
One Shift
Disposable
P
Gas/Vapour
Pyretrum
Full Face
Mask
• • •
A
One Shift
Disposable
•
Propylene
Pariculate
• • •
Gas/Vapour
A
Air Line B.A.
A
Propyl Alcohol
CEN Colour
• • •
Trichloroethylene
A
• • •
• • •
Polyacrylates
P
P
Picric Acid (2, 4, 6, Trinitrophenol)
Pyridine
• • • •
B/E
Gas/Vapour
Phtalic Anhydride
P
• •
CEN Colour
Phosphorus Trichloride
• • •
E
CEN Colour
Phosphoric Esters
Full Face
Mask
Sulphur Monochloride
Half Mask
• • •
One Shift
Disposable
P
Pariculate
A
Gas/Vapour
Parathion (Ethyl Parathion)
CEN Colour
Sulphur Dioxide
Full Face
Mask
• • •
Half Mask
P
One Shift
Disposable
Pariculate
A
CEN Colour
Gas/Vapour
Air Line B.A.
Filter Type
Air Line B.A.
Respirator Type
Paint (spray) Vapours
CEN Colour
IMPORTANT NOTE: It is the USERS responsibility to ensure that Protective Equipment is suitable and adequate for use in the
intended hazardous enviroment.
* Chemicals marked with this asterisk are liable to disorb; cartridges must only be used once and then discarded.
Filter Type
• • •
32
Qualitative Fit Testing
Qualitative Fit Testing can be used on what are defined as tight
fitting respirators, with the exception of full face masks. Within
the JSP Respiratory Protective Equipment range these products are:
•
•
•
Moulded Disposable Dust Masks
Vertical Fold Flat Dust Masks
Maximask 2000 Half Mask (fitted with dust filters)
Full face masks cannot be tested because the test hood is not
large enough for the mask fitted with a filter. For testing this
product it will be necessary to use the Quantitative method
(discussed below).
Qualitative Fit Testing can be used not only as a test method to
ensure your employees are properly protected; but also as a
33
very effective way of training them in the correct way of fitting a
mask. Dust and half masks commonly fail to do the job they are
intended to do because of poor fitting and care by the user.
The seal between the face and the edge of the mask is the most
common problem area. You will also see users using a mask
after having kept it on their head or hanging round the neck.
The test employs a hood to create a small test chamber around
the users head, and a test solution. This test solution has a bitter
taste. It is the same type of solution that is put on childrens toys
and fingernails to stop them chewing them. As the test uses
these two consumable parts and is designed to be carried out
by the employer; it is a very cost effective solution for assessing
the ability of the selected Respiratory Protective Equipment and
the training given to protect the employee.
Quantative Fit Testing
JSP offer a Quantitative Fit Testing service that can be carried
out at the employers site. The service can not only check how
well protected the employers staff are but also offer training in
the correct fitting and care of the respirator being tested.
Quantitative Fit Testing can be used on all tight fitting respirators
including full face masks. This means it is suitable for testing
all JSP Respiratory Protective Equipment except; PowerCap,
Jetstream and Air Fed. However generally speaking this
method will not be used when disposable dust masks are the
RPE being used. JSP use the Portacount from TSI to carry
out on-site Quantitative Fit Testing. This is an easily portable
particle counting device that has been developed in the United
States of America. It has been well tested in this market over
many years. Unlike in the EU, masks in the US are only tested
for their filtering efficiency and not on a selection of users to
check the inward leakage of contaminants as we do in the EU.
The problem with any standards testing is that it cannot take
into account the large variation in the shapes of peoples faces
and therefore it is important to know that a mask actually fits
the wearers face.
taken of the mask. Quantitative Fit Testing is a very effective,
and importantly, measurable way of ensuring that the user has
a mask that will give him/her adequate levels of protection.
Portacount works by comparing the particles outside a wearers
mask, with those inside it, that have got past the face seal.
JSP’s Respiratory Technicians will first check that there is a
suitable number of particles in the area that the masks are to
be tested in.
At the end of the test, a report is produced for inclusion in the
employee’s records. While this report is being printed JSP’s
Respiratory Technician will give the wearer instructions in the
care of his/her respirator.
Quantitative Fit Testing provides the employer with a measurable
result for a particular mask on a particular employee and is
therefore an extremely important part of an effective Health and
Safety programme.
Please contact 01993 826050 or
email [email protected]
to arrange for a site visit from one of our
Respiratory Technicians.
With all Respiratory Protective Equipment, the most common
problem is the fit of the mask to the wearers face and the care
34

Respiratory Safety Guide

Transcription

Similar documents

Use serviBELL sanitary mask for your valuable customers and clean

fi. a - Tangle Angel

Hydro-Filter™ - Phoenix Truckmounts

ÿþS PAC anada C over . jpg

here - PureLiving China

Princess Ariel`s Masquerade Mask

LLED 361 921 Tony Wu June 01, 2015 Assignment 3: MOA Field Tri

FishHedz Flier - Vic Bream Classics

Morion Head Mask

JSGPM. PROTECTING TODAY`S WARFIGHTER WITH