wireless microphones

Transcription

EXPERIENCE MORE .: FREEDOM :.
1800 Series Camera-mount Wireless Compatibility
System components of the 1800 Series and 3000 Series
Wireless Systems can be used interchangeably
Audio-Technica’s newly upgraded 3000 Series wireless systems now offer up to 1001 selectable UHF frequencies and
new features for clear sound & intuitive operation. We’ve simplified selection of usable frequencies, increased system
reliability, and illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid,
richly detailed high-fidelity sound. Wherever your performances lead you, experience more.
FEATURES
• 996 - 1001 UHF frequencies in one of three UHF
frequency ranges
• Antenna power available for powered antennas & other
in-line RF devices
• Nine pre-coordinated frequency scan groups
•
•
•
•
•
True Diversity operation reduces dropouts
Advanced digital Tone Lock™ squelch
Transmitters offer backlit LCD & dual-color LED
Automatic frequency scanning
Balanced and unbalanced audio output jacks
WIRELESS MICROPHONES
ATW2000-2PK
ATW2000PACK
ATW2000 Pack:
• ATW-2192AD: bodypack transmitter/half-rack receiver system with
BP892cW miniature headworn mic
• ATW-T220AD: handheld microphone/transmitter
• Operates in frequency block D: 655.500 - 680.375 MHz
Rock-Solid, Easy to Use UHF Wireless Systems
BSW
Customer
Favorite
Save a bundle with our exclusive Audio-Technica 2000 Series wireless packs! The easy to use
2000 Series boasts rock-solid dependable performance with features that make it ideal for
both non-technical users and those wishing to run multiple systems without setup hassles.
It offers robust, all-metal receiver housing with rack kits and removable antennas, automatic
frequency scanning, and more. The ATW-CHG2 two-bay recharging station provides power
to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a
UniPak transmitters in any combination.
ATW2000-2PK Two complete systems (see description)
List $1,067.99 $649.00
ATW2000PACK Complete headworn/handheld system (see description)List $1,128.00 $649.00
ATW-2110A Receiver, bodypack transmitter
List $429.00 $299.00
ATW-2120A Receiver, handheld mic/transmitter
List $499.00 $349.00
ATW-2129A Receiver, bodypack transmitter, lavalier mic, black List $499.00 $349.00
ATW-2192A Receiver, bodypack transmitter, headworn mic, black List $799.00 $549.00
ATW-CHG2
Recharging Station
List $279.00 $199.00
BUY TWO AND SAVE!
ATW2120AD system: handheld
ATW-CHG2
New
recharging
station!
dynamic mic/transmitter and a rugged
half-rack receiver
ATW2129AD system: half-rack
receiver and bodypack transmitter
with lavalier condenser microphone
Gator GM2W compact, durable
carrying bag
Operates in frequency block D:
655.500 - 680.375 MHz
ATW-A49
ATW-DA49
ATW-A64P
AC25
Powerful UHF Wide-Band
Antenna Systems
ATW-DA49: Wide-band 440-900 MHz active unitygain diversity antenna distribution system that enables
one pair of antennas to feed multiple wireless systems. It provides
two “1-in, 4-out” RF channels.
ATW-A64P: Pair of UHF (655-681 MHz) powered dipole antennas provide effective
signal pickup for diversity UHF wireless systems where longer antenna runs are
required. Designed for temporary or permanent installation, these antennas are
powered by 12 volts provided on the antenna cable by the associated receiver or
antenna distribution system.
ATW-A49: Pair of UHF wide-band directional LPDA (log periodic dipole array)
antennas provide enhanced signal pickup for UHF wireless systems throughout a
wide band range (440-900 MHz).
ATWDA49 UHF wide band antenna distribution system List $559.00 $399.00
$239.00
ATWA49
UHF wide band paddle antenna (pair)
List $459.00
ATW-A64P UHF high-gain antenna 655-680 MHz (pair) List $959.00
$499.00
ATW-A54P UHF high-gain antenna 541-567 MHz (pair) List $959.00 $499.00
AC25
25 ft BNC to BNC antenna cable
List $125.00
$61.91
Reliable
VHF Wireless
Systems
Audio-Technica’s
Freeway 200
ATW-R250
Series Wireless
Systems deliver
ATW-T202
reliable performance,
easy setup and clear, natural
sound quality. A dipole antenna system
on the receiver provides a ground element
ATW-T201
in addition to the usual signal element for
improved performance. All systems offered in
three frequencies (Freq. 2: 169.505 MHz; Freq.
3: 170.245 MHz; and Freq. 8: 171.905 MHz).
PRO 8HEcW
Specify when ordering.
The ATW-R250 is a single-channel receiver
with squelch and volume controls, a 1/4" output
jack along with AF Peak, RF and Power indicator
lights. The ATW-T202 handheld mic/transmitter has
a dynamic unidirectional microphone element and
comes with stand clamp. It operates on a single 9-volt
battery. The ATW-T201 UniPak transmitter features a
professional 4-pin locking connector and a dual-impedance input for instruments
and microphones. The PRO 8HEcW is a headworn dynamic microphone with a
hypercardioid polar pattern offering a frequency range of 200Hz-18kHz, with an
impedance of 600 ohms.
ATW252 ATW-R250 receiver and ATW-T202 handheld mic List $174.95 $99.95
ATW251H ATW-R250, ATW-T201 transmitter & headworn micList $249.95 $144.95
ATW251L ATW-R250, ATW-T201 transmitter & lavalier mic List $224.95$124.95
1·800·426·8434 • www.bswusa.com • [email protected]
99
We're the new morning team in town and we
don't want no sissy broadcast equipment. We'll
also require rack mount spittoon's and ashtrays.
Worry-Free Wireless Solutions From BSW
BLUEDRIVER-F3
ATW3000PACK
BSW
Customer
Favorite
BLUEDRIVER-M3
BLUEDRIVER-F3S
Wireless Combo Pack with Handheld and Headworn Mics
Wireless Audio Interfaces
JK Audio BlueDriver audio interfaces use Bluetooth Wireless Technology
to send and receive audio from your professional audio equipment.
BlueDriver-F3 plugs directly into a dynamic mic or the mic level output
from a mixing console. Pair to your Bluetooth enabled cell phone or headset.
The 3.5 mm stereo jack contains a mic level output suitable for recording,
with the clean mic signal on the left channel and the Bluetooth return on
the right. BlueDriver-M3 plugs into the mic input channel of a mixer and
pairs to your Bluetooth equipped cell phone or headset. The 3.5 mm jack will
accept a signal from the headphone output of the mixer for transmission
back to the cell phone or headset. A switch on either unit selects between
connection to a 3rd party Bluetooth headset, or a cell phone.
The BlueDriver S series boasts CSR's aptX low latency coding for highfidelity Stereo over Bluetooth wireless connectivity. The BlueDriver-M3S
offers 3 pin male mic level mono XLR, plus stereo 3.5mm inputs. It plugs into
the mic input channel of a mixer. The BlueDriver-F3S sports 3 pin female mic
level mono XLR, plus stereo 3.5mm inputs. It plugs directly into a mono mic
or the mic level output from a mixer.
BLUEDRIVER-F3
BLUEDRIVER-M3
BLUEDRIVER-M3
BLUEDRIVER-F3S
List $249.00
List $249.00
List $249.00
List $249.00 Contact BSW For Lowest Prices
With automatic frequency scanning to find and set the best available channel, 996 selectable
UHF channels, 10/30 mW switchable RF power and typical range of 300 feet, the Audio-Technica
3000 Series delivers truly professional performance. Our exclusive bundles feature a handheld
mic/transmitter as well as a bodypack system with a miniature headworn mic to give you two
mics so you’re ready for any live situation. Packs are available in three frequency ranges (Block C:
541-566 MHz, Block D: 655-680 MHz, Block I: 482-507 MHz).
ATW3000PACK:
ATW3000THPACK:
• ATW3192B receiver/bodypack transmitter
system
• AT892CW black headworn mic
• ATWT341B handheld mic
• ATW3192B receiver/bodypack transmitter
system
• AT892CW-TH beige headworn mic
• ATWT341B handheld mic
ATW3000PACK Bodypack/handheld system, black headworn mic
ATW3000THPACK Bodypack/handheld system, beige headworn mic
atw-t310B
Handheld mic/transmitter
ATW-T341B
Bodypack transmitter
atw-3110B
Receiver, handheld mic/transmitter
atw-3141B
Receiver, bodypack transmitter
atw-3131B
Receiver, bodypack transmitter, lavalier mic, black atw-3192B-th Receiver, bodypack transmitter, headworn mic, beige
Contact BSW For Lowest Prices
A
Versatile Cameramount
Wireless Systems
List $1,648.00
List $1,648.00
List $389.00
List $549.00
List $699.00
List $799.00
List $799.00
List $1,099.00
ATW1812D
ATW1811D
B
These UHF wireless microphone systems offer 996 frequencies selectable in 25 kHz steps
for extremely flexible, professional and portable performance. The 1800 Series features
include: automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch
buttons, headphone monitor output with independent level control, and durable metal
construction. 1800 Series systems operate in the 655-680 MHz band.
Choose from plug-on and bodypack transmitters to best fit your needs. The bodypack
transmitter features a locking 4-pin connector compatible with all Audio-Technica
Wireless Essentials mics. The plug-on transmitter sports a locking XLR connector for
adapting dynamic and condenser microphones. Transmitters offer selectable high and
low transmission modes to conserve or extend battery life and maximize power.
The dual-channel systems feature a dual receiver with two independent receiver
channels so you can operate two mics at the same time. Its dual balanced outputs let
you mix signals or independently assign them to each output.
C
ATW1821D
D
• Compact receiver is easy to mount on a camera
• UHF with 996 frequencies selectable in 25 kHz steps (655.500 to 680.375 MHz)
• Automatic frequency scanning for easy selection
of open channel
ATW1813D
Single Channel Systems:
A. ATW1811D
B. ATW1812D
C. ATW1813D
Bodypack system with lavalier mic
Plug-on system
Combo w/ plug-on & bodypack transmitters/lav mic
Dual Channel Systems:
D. ATW1821D Dual bodypack system
E. ATW1822D Dual plug-on system
List $ 795.00
List $ 795.00
List $ 1,295.00
E
List$1,995.00
List$1,995.00
ATW1822D
101
If You've Got The Application,
Feature-Packed UHF Wireless Systems
BSW
Shure’s Professional wireless systems are wireless the way it should be—simple, agile and robust!
The ULXP series improves upon standard Shure systems by adding a more advanced ULXP4 diversity
receiver, featuring removable 1/2 wave antennas, a 5-segment RF meter, advanced multi-function LCD,
squelch adjustment, frequency and volume lockout, mic/line level switch, and XLR and 1/4" outputs
with level control. The frequency-agile ULXP’s automatic frequency selection finds open frequencies
for you from the over 1400 selectable, pre-programmed frequencies available. Go online for additional
features. All systems available in two frequency ranges (Block J1: 554-590 MHz, Block M1: 662-698 MHz).
Customer
Favorite
ULXP24-58
ULXP24-BETA58
ULXP24-BETA87A
ULXP14-85 ULXP14-50 SM58 dynamic capsule Beta 58 dynamic capsule Beta 87A condenser cap. Bodypack w/WL185 lavalier mic Wireless mic system w/ sub mini lav mic
Rugged, Great-Sounding Lavalier
Wireless Systems
SLX14-85 &
SLX14-93
SLX24-58 &
SLX24-BETA58
SLX14-30
Shure’s rugged SLX UHF wireless systems offer powerful yet
affordable wireless that can be set up quickly and used confidently,
with innovative features such as automatic frequency scan, automatic transmitter
setup, and legendary Shure microphone capsules. There
are many models to choose from: The SLX24-58 features the popular SM58 cardioid
dynamic microphone, SLX2 transmitter and SLX4 diversity receiver. The SLX24-Beta 58
features the quality Beta 58 supercardioid dynamic microphone. The SLX14-85 features
the WL185 cardioid condenser clip-on lavalier mic, SLX1 bodypack transmitter and
SLX4 diversity receiver. The SLX14-93 is the same system with a WL183 omnidirectional
lavalier microphone. The SLX14-30 features
the WH30TOG miniature headworn mic instead of the clip-on lavalier mic. The
WH30TOG is a unidirectional gooseneck condenser mic with
a wireframe and elastic headband, providing low-profile and comfortable wear. All
systems available in three frequency ranges (Block H5: 518-542 MHz, Block J3: 572-596
MHz, Block L4: 638-662 MHz).
receiver features:
transmitter features:
• Auto Frequency Selection; 960 selectable
frequencies across 24 MHz
• Detachable 1/4-wave antennas
• RF presence LED and 5-segment audio meter
• Multi-function backlit LCD with battery indicator
• Frequency and power lockout
• XLR and 1/4" outputs
• 1/2 rack design with furnished rack hardware
• Automatic Transmitter Setup and
backlit LCD
• Frequency and power lockout, and
3-segment battery fuel gauge
• AA batteries provide 8 hours of use
• 518-782 MHz operating range
SLX24-58
SLX24-BETA58
SLX14-85
SLX14-93
SLX14-30
Handheld w/SM58
Handheld w/Beta 58
Bodypack w/WL185 cardioid lav
Bodypack w/WL183 omni lav
Bodypack w/headset mic
Boost Your Performance with
Wide-Band Antenna
Works with all Shure systems! Unlike most other
antennas, which are more sensitive to signals of only
one polarity, the HA8089 is circularly polarized, giving
it greater sensitivity regardless of the orientation of the
transmitting antenna. Gain 14 dB; bandwidth 550 MHz to
>900 MHz; beamwidth 50°; right angle BNC connector.
Great for Large Scale Touring or Installations
Shure’s top-of-the-line UHF-R Wireless Systems master the extreme conditions
of any large-scale touring or installation environment, while delivering unparalleled
Shure sound. Rock-solid engineering, the latest technology and unparalleled RF
performance provide you with all the features and flexibility you need to tightly
control up to 108 systems for the most elaborate productions. These systems
provide fast setup, robust wideband performance and full PC system monitoring
via Wireless Workbench Software (included). Go online for all product features. All
systems available in three frequency ranges (Block H4: 518-578 MHz, Block J5:
578-638 MHz, Block L3: 638-698 MHz).
UR24S-SM58 Single channel handheld system with SM58 mic List $3,601.00
UR24D-SM58Dual channel handheld system with SM58 mics List $5,926.00
UR14S
Single channel bodypack system with guitar cable List $3,449.00
UR14D
Dual channel bodypack system with guitar cables List $5,624.00
102
List $749.00
List $799.00
List $824.00
List $749.00
List $824.00
UR24D-SM58
List $1,074.00
List $1,149.00
List $1,224.00
List $1,111.00
List $1,211.00
HA8089
List $599.00
Wireless System Case for
Shure SLX Systems
Designed to hold Shure SLX and ULX wireless systems.
Interior foam can hold the receiver, quarter and half
wave antennae, handheld mic, bodypack, lavalier mic,
9V and AA batteries, mic clip and power supply. Other
wireless systems from other manufacturers MAY fit in
this case, however, the foam is cut specifically for the
Shure SLS and ULX wireless systems.
$
99
3I-1711-XLX
List $209.99
129
Depend on BSW for the Best Selection and Lowest Prices
We've Got The System!
Affordable UHF Wireless Systems
Unplugged. Uncompromising. Undeniably Shure wireless.
With the PG UHF systems choose from up to 10 channels
per system at the touch of a button, and you can use up
to 8 systems simultaneously. These systems all come with
a receiver and your choice of transmitter mics (handheld
with PG58 element, lavalier, or headworn microphone).
The microprocessor-controlled internal antenna means no
more damaged antennas or misalignment. You get superior
reception at minimal cost. It automatically monitors signal
strength and adjusts for continuous reception. Single and dual channel receiver
models available. Each system comes in one of three frequency ranges (H7: 536-548
MHz, K7: 590-602 MHz, M7: 662-674 MHz).
PG24-PG58
PG14-PG30
PG14-PG185
PG1288-PG185
Handheld system w/PG58 mic
Headworn system
Lavalier mic system w/bodypack and 185 mic
Dual channel system w/ handheld & lav mic combo
List $374.00
List $374.00
List $374.00
List $686.00
BSW
Customer
Favorite
Simple Setup, Professional Sound
It’s never been easier to go wireless and sound like a
pro. For only $379 you can have this world-class handheld
wireless system with PG58 capsule. Shure’s Performance Gear
Wireless brings the road-tested sound of Shure microphones
together with automatic setup features for worry-free
performance, every time. Performance Gear Wireless systems
feature Shure’s patented Audio Reference Companding for
crystal-clear sound. All systems available in three frequency
ranges (Block H6: 524-542 MHz, Block J6: 572-590 MHz, Block
L5: 644-662 MHz). Specify when ordering. The slightly more
expensive PGX24-SM58 features the popular SM58 cardioid
mic cartridge with its voice-tailored 50 Hz-15 kHz frequency
response and durable construction, with a transmitter and PGX4
diversity receiver.
Also available are handheld systems with Shure SM58 and
Beta58 mic capsules, and a bodypack system with a WL93
miniature omni lav mic.
Transmitter Features:
PGX24-PG58
PGX14-93
PGX24-SM58
PGX24-BETA58
List $474.00
List $524.00
List $499.00
List $561.00
• Automatic transmitter setup
• Multi-function LED indicator (power,
lockout, mute, low battery)
• -10 dB pad
• 2 “AA” batteries provide 8 hours of use
• RECEIVER Features:
• Automatic frequency selection
• 90 selectable frequencies across 18 MHz
bandwidth; 1/4 wave antennas
• Microprocessor-controlled diversity
• Channel display LED
• XLR and 1/4" outputs XLR and 1/4"
outputs
Robust, Stable Wireless
These UHF synthesized wireless microphone systems from Sony boasts robust metal construction and offer
a PLL system for stable transmission and reception of user selectable frequencies (in increments of 125 kHz),
dual-antenna inputs/reception circuits that receive signals over two different paths (automatically selecting
the stronger RF signal for output), simultaneous multi-channel operation of up to 16 microphones and
comprehensive tone squelch circuitry to avoid picking up other systems’ carrier signals.
Operating on channels 30-33 or 42- 45, the series gives you a choice of a lavalier microphone, bodypack
transmitter and portable receiver system or a unidirectional handheld microphone/transmitter and portable
receiver system. Visit our website for full details!
UWPV1-3032
UWPV1-4244
UWPV2-3032
UWPV2-4244
Lavalier mic, bodypack transmitter, portable receiver; chnls 30-33
Lavalier mic, bodypack transmitter, portable receiver; chnls 42-45
Handheld mic/transmitter, portable receiver; chnls 30-33
Handheld mic/transmitter, portable receiver; chnls 42-45
List $727.00
List $727.00
List $727.00
List $727.00
Gator Wireless Dual System Mic Bag
This compact yet extremely durable bag efficiently holds two wireless mic systems for safe and efficient transport. The GM2W features
two extra deep microphone drops (8.5"), storage compartment for two wireless receivers, shoulder strap, exterior dim: 18" x 6" x 9"
$
99
GM2W List $79.99
49
Gator Wireless
Microphone Bag
Specially designed for a wireless system
to be used while the transmitter remains
in the case. Space for cables, and wireless
microphone or bodypack. All you do is
unzip the front and back and plug-and-play.
00
GM1W List $69.99 $
39
"Been There...Done That. We have
the answer to your questions"
— Gary Beebe, Sales Engineer /Broadcast Veteran
103
Drama belongs on the air, the stage or the screen, not
in your wireless microphones. The Venue and SM
Series Digital Hybrid Wireless® systems provide the
transparent sound, rock-solid reliability and supersmall size you’ve come to expect from Lectrosonics.
Choose Lectrosonics and raise your wireless standards.
Made in the USA by a Bunch of Fanatics.
Always ON.
Since its origin, radio was
(and still is) magic.
It communicates, entertains and has
the ability to ignite the imagination. A
microphone. A transmitter. A frequency.
A voice or sound. Pure magic.
There is a special magic to radio and
broadcast equipment, too. Each and
every part, panel and piece plays an
important role in the magic of radio. It
has to be ‘ON’ and working—around the
clock, day and night, 365 days a year.
The same can be said for the engineers
who maintain, fix and keep this gear alive.
Working their magic, often alone, the
engineer is the “behind the scenes
HERO” that makes sure radio stays ‘ON’.
BSW is a lot like the engineer. Our people
come from that world. We know how the
magic works. And while we sell gear,
we are motivated by the idea of keeping
the magic alive. Keeping radio ‘ON’ for
everyone to hear. Just like the engineer
and radio itself—BSW is always there,
always working ... always ON.
broadcast gear from people you trust
800-426-8434 bswusa.com
Durable and Powerful
Outstanding audio quality
and extensive operating
range make them ideal
for field reporting!
ENGPACK-1
BSW
Customer
Favorite
Digital Hybrid CameraMount Receiver Packages
The ENGPACK1 combines the UCR401
with the LMA 50mW bodypack
transmitter and M152-5P high performance
omnidirectional lavalier mic/cable. The
ENGPACK2 offers the UCR401 along with the
UH400A XLR plug-on transmitter and a CCMINI carry
case for your mic system. The UH400A features multi-voltage
phantom power for extra versatility. For a top-notch handheld
mic system, the ENGPACK3 pairs the UCR401 with the powerful
100mW UT-VMC handheld microphone/transmitter. You’ll
experience the longest possible transmission range for reporting
in the field or for other professional applications.
The UCR401 and all 400 series components are available in many
frequency blocks (for example Block 25: 640-665 MHz, Block
26: 665-691 MHz).
ENGPACK-1 Lav mic system
ENGPACK-2 Plug-on system
ENGPACK-3 Handheld mic system
List $2,908.00
List $3,185.00
List $3,530.00
ENGPACK-2
ENGPACK-3
Lectrosonics SRa
Dual-Channel Slot-Mount
Wireless Receiver
SRA
The Lectrosonics SRa Camera Slot Dual UHF
Receiver offers two independent channels and
fits into the standard video camera slots found on
professional cameras. The two audio channels can
feed separate inputs or can be mixed internally to
feed a single input. It features detachable whip
antennas and dual, balanced TA3 (mini-XLR)
audio outputs on the rear panel. Its two Digital
Hybrid Wireless receivers offer 256 frequencies
Customer
each in one of multiple available blocks, and
Favorite
operates with any of the Lectrosonics 400
Series transmitters without a compander in
the audio path. Compatibility modes also facilitate operation with Lectrosonics
100 Series, 200 Series, and IFB analog systems, along with analog transmitters from
other manufacturers. The SRa can be used with slot-equipped Sony and other
professional cameras via optional connector kits. Call or check our website for
frequency block options.
BSW
Great Sounding Digital Wireless
The industry-standard Lectrosonics 400 Series digital hybrid wireless system
combines digital audio with an analog FM radio link to provide outstanding
audio quality and the extended operating range of the finest analog systems. The
unmatched durability of its portable transmitters and receivers and attention to
every mechanical detail makes Lectrosonics wireless the best choice for on-location
work. Purchase your high-quality Lectrosonics 400 Series wireless systems a la
carte or in ready-to-go, economical packages! All systems are available in various
frequency blocks.
All receivers feature Digital Hybrid Wireless Technology, SmartSquelch for noiseless
muting, SmartDiversity for enhanced RF reception, 256 selectable UHF frequencies,
DSP-based pilot tone, and compatibility modes for use with analog transmitters.
R400A:
Adds SmartNR noise reduction, RF-controlled digital noise filters, robust low noise
RF front end, graphics type backlit LCD display, independent balanced XLR and
unbalanced 1/4-inch audio outputs R400A
List $865.00
106
SRA
SREXT
SRSNY
SRUNI
Wireless receiver
Mounting kit for external cameras
Mounting kit for Sony cameras
Mounting kit for unislot cameras
List $2,550.00
List $150.00
List $150.00
List $150.00
UT-VMC Handheld
Cardioid capsule, 100 mW output power, VariMic
capsule with attenuator and tone controls,
compatibility with Digital Hybrid Wireless
and analog receivers.
UT-VMC List $1,745.00
Wireless From Lectrosonics
Trusted Digital UHF Wireless System Components
All transmitters feature Digital Hybrid Wireless Technology and 256
synthesized UHF frequencies.
UM400A Beltpack
100 mW output power, DSP controlled dual
envelope input limiter, DSP emulations for analog
compatibility, servo bias input preamp, DSP based
pilot-tone signal, Circulator/Isolator output stage,
adjustable low frequency roll-off
UM400A List $1,750.00
LMa Beltpack
Greater than 50mW power output, multimode compatibility with Digital Hybrid
and analog receivers, DSP controlled, dual
envelope input limiter, 5-pin input jack for
mic and line level signals
LMA
HM Plug-on
100 mW output power, membrane switch control
panel with LCD display, converts microphones
with XLR jacks to wireless operation, selectable 5,
18 and 48 volt phantom power plus off position
for dynamic mics, adjustable low frequency roll-off
HM
List $1,375.00
Accessory:
M152-5P Omni Lavalier Mic,
TA5F Connector
High-performance omnidirectional lavalier mic
with locking 5-pin (Switchcraft TA5F) plug. (Threewire configuration.) Compatible with SM and UM
series belt-pack transmitters.
M152-5P List
$208.00 Contact BSW For Lowest Prices
MM400C Miniature
Beltpack
100 mW output power waterproof
Power/Mute switch, water resistant,
rugged, machined aluminum housing,
dual bicolor LEDs for accurate gain
adjustment.
SMV Ultra-miniature Beltpack
MM400c List $1,790.00
Variable, selectable power output (50mW, 100mW),
membrane switch control panel with LCD display,
Circulator/Isolator output stage, splash-proof, machined
aluminum housing
SMV
List$1,725.00
You see kids? BSW's Ohio
warehouse is centrally
located for fast shipping
anywhere in the nation!
107
CAPTURE IT WITH
IT‘S ONLY NEWS ONCE - EVERYTHING AFTER IS JUST A RE-RUN.
When it‘s your job to capture the moment, you don‘t get second chances.
Broadcast professionals and videographers around the world rely on
Sennheiser‘s fifty-plus years of wireless expertise to deliver pristine audio to
their audience every day. Industry leading features - such as 1680 tunable
frequencies, infrared synchronization, and adaptive antenna diversity combine with rugged reliability and rock solid RF wireless technology to create
the perfect audio set-up for any application.
To find the best wireless set-up for your needs, contact the audio specialists
at BSW and experience world-class audio on your next take!
www.SennheiserUSA.com/G3
BSW Gives You Freedom To Move
EM2000
Flexible Wireless
The Sennheiser 2000 Series wireless microphone system features
handheld and bodypack transmitters (delivering switchable RF output
power up to 100mw) with single or twin receivers for stage, broadcasting and
installed sound applications. It offers a high
level of frequency flexibility and multichannel capability with
consistently superb audio quality. Depending on the UHF range, the units
have a switching bandwidth of up to 72 MHz in the US, in which up to 64
compatible frequency presets are available for microphones and up to 32 for
monitoring systems.
The 2000 Series is available in 3 frequency blocks: A (516 - 558 MHz), B (626 668 MHz) and G (566 - 608 MHz). Call or visit our website for complete details
on the 2000 Series.
SKM2000BK Handheld transmitter SK2000
Bodypack transmitter EK2000
Camera Mount Receiver EM2000
Single-channel rackmount receiver SKM2000BK
List $799.95
List $799.95
List $899.95
List $1,849.95 Contact BSW For Lowest Prices
SK2000
EW122G3
EW135G3
Powerful Wireless Packages
These powerful systems feature a rackmount
receiver and offer Auto-Scanning to easily find the
best channel while boasting noise-suppressing
compander technology for a crystal clear sound.
The ew 135 G3 features a 30mW handheld
transmitter with E835 cardioid capsule. The ew
122 G3 features a 30mW bodypack transmitter
and a cardioid clip-on microphone. It offers userfriendly operation and absolute reliability due to
the true diversity receiver. It also boasts wireless infrared transmitter
sync for easy setup.
The Sennheiser ew 100-ENG G3 ENG set offers user-friendly operation and absolute
reliability with its true diversity receiver. Its SKP 100 G3 plug-on transmitter
transforms XLR equipped devices into wireless devices by simply plugging the unit
in. The bodypack transmitter, as well as the plug on, can be synced up to the receiver
with the simple push of a button. A very small high-quality omnidirectional clip-on
microphone completes this set. The Sennheiser ew 112 G3 presentation set features
the same receiver, bodypack transmitter and clip-on microphone, but without the
plug-on transmitter. All sets are available in 3 frequency blocks: A (516 – 558 MHz), B
(626 – 668 MHz) and G (566 – 608 MHz).
EW135G3
EW122G3
EW112PG3
EW100ENGG3
List $599.95
List $629.95
List $629.95
List $799.95
EW112PG3-A
bswusa.com
Find additional product info, read reviews
and request a quote, day or night.
EW100ENGG3-A
109
MICROPHONE STANDS
BSW SUPER
6-PACK!
K&M 210/2
Mic Stand with
Fixed Boom
Get six sturdy boom mic stands and a bag
to carry them in at an amazing price! The
Ultimate Support JS-MCFB100 tripod mic
stand with fixed-length 30" boom resists
tipping and is built tough to withstand
every-day use. The powder-coated finish is
scratch resistant to maintain its appearance.
You can easily adjust it to perfect height
(39" - 66.5") with the traditional turn clutch.
The K&M 210/2 is the industry
standard for a mic stand and
boom arm combination.
Consisting of the 201A/2
microphone stand and the
211 boom arm, it features
a folding base for ease of
transport and long legs
for added stability. Height
adjusts from 36" to 63". Boom
length: 33". Weight: 7 lbs.
Black finish (also available in
nickel finish).
99
210-2 List $104.99 $
MICSTAND-6PK 6-Pack Stands
$98.00
List $179.99
JS-MCFB100
Single Stand
$29.99
List $59.99
74
K&M 201A-2 Folding
Tripod Base with Clutch
Mechanism
Ultimate Support
MC-40B Microphone
Stand with Fixed Boom
The K&M 201A/2 microphone stand
features a folding, long-legged diecast base for stability and a noiseless,
non-scratching clutch-style heightadjustment mechanism. Height adjusts
from 36" to 63". Weight: 5.3 lbs. Black
finish (also available in nickel finish).
99
201A-2
List $74.99 $
Looking for a high-quality, very
rugged Ultimate mic stand? Here’s
the new MC-40B complete stand
package with tripod stand and fixed
length boom at a really reasonable
price! Height 36"-63".
$
99
MC-40B List $59.99
39
54
Ultimate Support Pro-T
Mic Stand
The PRO-T tripod mic stand features
an overmolded clutch and adjusts
in height from 41.7"-63". All models
black finish.
PROT
LIVET
JS-KD50 List $49.99
2499
$
110
List $109.99 79
K&M Telescoping
Instrument Stand
The K&M 259 low-level
microphone stand boasts a
steady, heavy tripod base with
foldable legs. The two-piece
boom arm adjusts from 18" to
30". Height adjust 16.7 to 25".
Weight 5 lbs. Black finish.
99
259 List $109.99 $
List $109.99
7999
$
59
The Ultimate Support JS-KD50 mic
stand is great for amps or kick drums
with its solid base for stability and an
adjustable height of up to 14.2". Its
fixed boom arm gives you even more
positioning flexibility.
210-9
The LIVE-T has a tripod base
with legs that lock into place
and also features one-hand
height adjustment (45.3"- 74.8").
99
Flexible Floor
Stand with Boom
The K&M 210/9 is the industry standard
for a standard mic stand and telescoping
boom arm combination. Consisting of
the 201A/2 microphone stand and the
211/1 telescoping boom arm, it features
a folding base for ease of transport and
long legs for added stability. Height
adjusts from 36" to 63". Boom length:
18-30".
Weight: 7 lbs. Black.
99
$
Ultimate Support
Live-T Mic Stand
List $89.99
$
K&M Boom Stand
Mic Stand with Telescoping
Boom
79
Great for Kick Drum!
Ultimate Support’s JS-MCFB50
features a tripod base for
stability and an adjustable
height of 16" to 23". The 24"
fixed-length boom gives you
flexible mic placement options.
JS-MCFB50 List $40.99
2599
$
Why don't we print
our prices? We are
constantly negotiating
with our vendors,
buying in bulk and
putting together special
packages to bring you
the best price every day.
MICROPHONE STANDS
K&M 231-1
Desk Stand
On-Stage Desktop Stands
These stands are ready to handle any desktop
application. All boast a solid sand-cast base with five
rubber feet for serious stability.
The DS7100C is fixed-height desktop stand; 4" high;
6" base diameter; base weight: 2 lbs; chrome shaft.
DS7100B has black shaft.
The DS7200B is an adjustable-height stand;
die-cast steel clutch; 9"-13" height adjustment;
6" base diameter; base 2 lbs; black. DS7200C has
chrome shaft.
The DS300B is a combination desk stand and boom;
6" black sand-cast base; fixed 4" black riser and 7"
black boom with Posi-Lok clutch.
DS7100C Fixed height stand, chrome
$9.99
DS7100B Fixed height stand, black
$9.99
DS7200B Adjustable height stand, black
$14.99
DS7200C Adjustable height stand, chrome $14.99
DS300B Mic stand with boom
$19.99
The K&M 231/1 is a compact, lightweight desktop
microphone stand featuring a plastic base with folding
legs and a 3/8" thread. Height: 2.37". Weight: 3.5 oz.
231-1
List $15.99 $11.99
DS7200B
On-Stage Desktop Mic Stand
The 79060 quick-release adjustable desk stand features a
6" diameter base and a push-button clutch for fast height
adjustments from 8" - 13". Black finish.
99
$
79060 List $29.99
15
DS7100C
Atlas Sound DS7 Desktop Mic Stand
This adjustable mic stand reaches from 8 to 13 inches and
sits on a sturdy 6" diameter base. A grip-action clutch easily
secures height adjustment.
95
$
DS7 List $53.95
DS300B
34
This Mic Stand is a
Road Warrior
The JS-MCRB100 round base mic
stand from Ultimate Support
resists tipping and is built
tough to withstand everyday
use. You can easily adjust it to
perfect height (34" - 61") with its
traditional turn clutch.
JS-MCRB100
List $49.99
2799
$
Offers quick and
easy adjustment!
Ultimate Support
MC05B Mic Stand
The MC05B boasts a quick
release clutch for smooth height
adjustment (34.75" - 64"), a sturdy
round cast iron base and a cable
management system that lets you
easily snap cables into place.
MC05B
List $44.99
2799
$
Handy Fixed Mic Boom
The Ultimate Support ULTIBOOM-TB telescopes from 18.9" - 34.6" and
offers large, easy to grasp knobs for quick adjustment. It also features
extruded and anodized aluminum tubing with internal glides for
smooth and noise-free operation.
$
99
ULTIBOOM-TB List $69.99
39
Lowest Prices. Largest Inventory.
Same Day Shipping*. That’s BSW!
Ultimate Support
Rolling Microphone
Boom Stand
The Ultimate Support MC125 is a
professional studio boom stand
sporting a large diameter base with
locking rollerblade-style wheels.
It has a low center of gravity for
extra stability. The height adjusts
from 51.5" to a full 82.75" and you
can smoothly raise or lower the
height with the reliable clutch. The
MC125’s long boom telescopes
from 35" - 61" and features a
friction-free clutch arm extension.
It also includes a unique, easy-toadjust 5.75 lb. counterweight. Black
finish.
*O
rder by 7pm Eastern
Time Monday thru Friday
and stock items from our
Ohio distribution center
ship the same day!
MC125
List $249.99
19999
$
BSW/Broadcast Supply Worldwide Distribution
Center is located in Lockbourne, OH.
111
MICROPHONE ACCESSORIES
On-Stage
Goosenecks
Makes Talent Sound Even Better
The Heil VAC-PR40 pop filter is the perfect
complement for Heil PR30 and PR40 front address
microphones. A clamp with a mini-gooseneck
adjusting system places its two 3.5-inch diameter
acoustic screens in front of the microphone.
Attaching the VAC-PR40 to the Heil SM2 shock
mount keeps the microphone isolated from
unwanted vibrations. The acoustic screens stay in
position with respect to the microphone despite
movement of the radio station arm or mic stand.
99
VAC-PR40 List $82.00 $
MC6
These goosenecks
feature solid steel male
and female threaded
ends for a universal fit.
Black or chrome.
MSA9030-06B
MSA9030-06C
MSA9030-13B
MSA9030-13C
MSA9030-19B
MSA9030-19C
6", black
6", chrome
13", black
13", chrome
19", black
19", chrome
Windtech makes heavy-duty mic clips.
Adjustable angle; brass insert with 5/8"-27 threads.
$8.99
$8.99
$10.99
$10.99
$12.99
$12.99
78297-PKG
19
MC6
MC9
SMC7
Standard tapered,
slip-in clip fits handheld mics $8.95
Slip in, heavy-duty mic clip
$9.95
with rubber insulator
Spring clamp-style clip fits a
$8.95
wide variety of mics
Windtech Mic Clips
with Shockmount
Shure
Pop Filter
4 replacement suspension cords for the ElectroVoice 309A shock mount for less than 20 bucks!
$
95
SMC7
Windtech Mic Clips
54
309A Rubber Bands
MC9
The Shure PS-6 pop filter
is 6" in diameter and has a
durable, 4-layer screen that effectively stops ‘p’ and ‘b’
sounds. It’s mounted on a fully-adjustable 14" gooseneck terminated with a mic stand clamp suitable for
many mounting applications.
$
95
PS-6
36
These handy shockmounts for 20-30 mm
mics (depending on model) can hold 35
pounds snugly. 5/8"-27 threads.
SP-20 Shockmount for 20 mm mics $11.95
Shure Mic Clip
The A25D is a rugged stand adapter for
the SM57/SM58 and other 3/4" and larger
handheld mics.
$ 95
A25D
9
On-Stage Studio
Mic Shockmount
If I keep my head perfectly
still these Rabbit Ears have
great reception...
This shockmount offers
vibration-free support.
Fitting most large
diaphragm condenser
microphones (42-48mm
diameter) and boasting a
die-cast steel adapter with 5/8"-27 threads, it features
an angle adjustment with locking knob, and will attach
to any microphone boom. The mic clamp interior is
covered in cloth for maximum protection.
$
99
MY410
25
Multi-Position Mic Clamp
WindTech
Microphone
Windscreens
WindTech windscreens are high quality, cost-effective
and come in a large variety of colors. These screens are
made of an open-cell, hypo-allergenic foam that won’t
color sound, yet provides maximum protection against
wind-noise and P-popping. Just call BSW, specify the
mic you are using and the color you want and we'll get
you fitted right. Below are some of the most common
sizes and colors.
SERIES
WS1BLK
WS312
WS612
WS912
WS912PACK
WS900PACK
112
DESCRIPTION
X-large spherical
Regular spherical, blk
Small spherical, blk
Large spherical, blk
5-pack, black
5-pack, mixed colors
DIAMETER (inside)
2"
1-3/8"
1"
1-5/8"
1-5/8"
1-5/8"
$30.95
$7.75
$7.50
$7.95
$29.95
$29.95
The Windtech MPC10 allows mics to be
mounted almost anywhere. Fits up to
1-1/4" round members or up to 1-1/2" flat
surfaces. Threads rotate to 3 positions.
$
95
MPC10
19
Fits Most Any Mic
The Hosa MHR122 is a universal
spring-clip mic holder, boasting brass
fittings and insert.
$ 95
MHR122
6
On-Stage Flange Mounts
Surface mount with diameter of 1.75",
standard 5/8"-27 threads and three
mounting screws. Black or chrome.
TM02B Black $6.95
TM02C Chrome $6.95
BROADCAST MIC BOOMS
BSW
Customer
Favorite
OC White
Triple-Arm
Mic Boom
w/ Riser
The 519003B triple
boom mic stand is
the talk show
standard. This
combination includes
three 29" Ultraflex
mic booms and one
triple mic riser. It’s the
easy way to place
multiple mics in your studio!
Black color (beige and gray
are also available).
The 619003BG (not shown) is the Elite
version with silent, soft gold music wire
springs. Black or beige.
519003B Black List $387.00
519003
Beige List $387.00
619003BG Black List $524.00
619003
Beige List $479.00
BSW
exclusive
Arrange the flat-panel
monitors in your studio or
workstation efficiently and elegantly
with these M!ka monitor stands. It's internally wired with open
cable tails for user fitting of connectors, and offers several optional
mounting options. Choose the natural aluminum finish or dark gray.
The long 31.5" reach suits any on-air application. Add an optional
pole for additional height.
Our Best-Selling
Mic Boom
The OC White ProBoom
deskmount studio mic boom
offers incredible value, rugged
design and a lifetime
MFR warranty!
MIKARM MIKARM-G
MIKARM-ONAIR
MIKARM-ONAIR-G
BUSHING CLAMP
• 41" arm with 12" riser for table
top mounting
• 2 sets of upper springs handle
all types of mics
• Requires no maintenance, lifetime MFR warranty
PROBOOM-B
World-Renowned
Desktop Mic
Booms
MAPM
POLE-17
POLE-33
PDM-KIT
Mic arm, aluminum finish
List $292.00
Mic arm, dark gray
List $ 292.00
Aluminum w/ on-air indicator
List $ 376.00
Dark gray w/ on-air indicator
List $376.00
Bushing for mounting arm directly into table hole List $68.00
Table clamp List $47.00
Arm mount for side of pole
List $103.00
17" vertical pole
List $94.00
33" vertical pole
List$147.00
Pole mount to desk kit
List $47.00
$99.00
Black
Get TWO Booms and SAVE $19!
Silent Mic Boom
PROBOOM-B2PK 2-Pack black
17900
$
14005B
OC White Mic Boom Accessories
BSW stocks all the necessary hardware for your
OC White microphone boom.
14005B Table "C" clamp, black
$27.95
14005G Table "C" clamp, gray
$34.95
11427B Table mount base, black
$25.95
11427 Table mount base, beige
$25.95
11426B Wall mount base, black
$25.95
11426G Wall mount base, gray
$31.95
14100B 12" riser, black
$69.00
14100 12" riser, beige
$69.00
14250B 12" riser w/ XLR built-in, black $89.00
14250B
11426G
11427B
The Heil PL-2T moves silently and uses a
system of internal springs to handle mics up
to 3.5 lbs! Removable top and back makes
cable easy to thread without having to
remove connectors. Shipped with desk “C”
clamp. Black color.
00
PL2T $
120
Accessories:
RS1
DT1
FL2
WM1
12" riser, black
Flush mount
Flange/surface mount
Wall mount
$28.00
$35.00
$28.00
$22.00
14100B
Innovative Flatscreen
Monitor Stands
Based on the same M!ka microphone
boom system, you can arrange the
flat-panel monitors in your studio or
workstation efficiently and elegantly. The
MONARM is a two-part articulated arm
with VESA 75/100 standard video monitor
attachment. Robust ball-and-socket joint
POLE-33 with (4) MONARM
for optimum viewing and quick-release catch for
height adjustments. Supports flat screens up to 22 lbs.
Total length: 18 inches. Height of sliding section: 8 inches.
The FLEXM is a monitor mount without arm. Mounts right next to pole, but includes
ball-and-socket joint to adjust viewing angle.
Poles are available in two heights: POLE-17 with a 17" aluminum post. Its four side
profiles let you mount multiple Monitor Arms. Also POLE-33: 33" tall.
The PDM-KIT: a desktop mounting kit for the POLE-17 or POLE-33 through a 10 mm
hole in the tabletop.
MONARM Monitor mount arm List $292.00
FLEXM
Monitor mount
POLE-17 17" vertical pole
List $94.00
POLE-33 33" vertical pole
List $147.00
PDM-KIT Pole mounting kit
List $47.00
Rugged, Affordable
Mic Booms
The OC White 51900 is the mic
boom of choice for many facilities,
featuring heavy-duty springs, a 12"
riser, a 29" boom and a choice of
finishes. The 52900B has a 46"
boom. Booms are also available
without risers.
51900BLK Black, 29" arm/riser
List $159.00 $129.99
52900B Black, 46" arm/riser
List $184.00 $159.95
14194B Black, 29" arm
List $104.00 $89.95
14199 Black, 46" arm
List $149.00 $129.99
Heavy-Duty Mic
Boom w/ Riser
The OC White Elite 61900 holds
any microphone quietly in
position, hiding the cable and
improving appearance. The base
provides a wire channel through
the riser that is prewired to a
built-in XLR female jack with
3 feet of pigtail from the base
for the user to wire as needed.
Black, gray or beige.
61900BG Black
$198.95
List $229.00
61900
Beige
$182.95
List $209.00
113
MICROPHONE ACCESSORIES
Easy Mic Muting
The Rolls MM11 MicMute is an easy to use device designed to temporarily mute
a balanced XLR signal (lowers signal about 60 dB). Simply press the switch for
muting, and release to hear the signal again.
$
95
MM11
44
Consistent Audio Levels for Voice
Intelligibility
Comprehensive Mic Muting
Pro Co Sound introduces new models of their
legendary Cough Drop mic mute button.
CDSS
CDPM
CDSO
CDPB
• Short Stop is a passive momentary mic-muting
switch
• Sign Off is a passive latching microphone-muting
switch
• Power Mute is an active Cough Drop, with all the
functions of Short Stop and Sign Off, plus a status
indicator
• Panic Button lets live entertainers switch
their mic signal from Output A to Output B
so they can contact their roadie or monitor
mixer for assistance
CDSS
CDSO
CDPM
CDPB
Short Stop Sign Off Power Mute Panic Button
List $114.99
$75.95
List $114.99 $75.95
List $206.99 $139.00
List $255.99 $169.00
The Radio Design Labs EZ-MCP1 in-line microphone
compressor produces consistent audio levels despite
wide variations (up to 30 dB) from the microphone.
Just install it between a dynamic or condenser
microphone and a mic-level mixer or amplifier
input. Sporting an XLR input and output, it will
automatically switch on 24V phantom power when
it’s connected to a phantom powered mic jack.
EZMCP1 List $205.09
Sally, that case is for
microphone accessories,
not your makeup!
Inline Attenuator
The AT8202 prevents overload of sensitive input
stages. It provides -10 dB, -20 dB or -30 dB attenuation
and is compatible for use in phantom power
applications. The durable steel case provides optimum
shielding from hum. For use with balanced Lo-Z mics.
Can be plugged directly into a female 3-pin chassismount connector.
$
95
AT8202
List $59.00
46
PHANTOMIIPRO
Phantom Power
ART’s PHANTOMIIPROis a 12V/48V phantom power
supply. It can be either battery or AC powered.
PHANTOMIIPRO 12V/48V phantom List $89.00
Handy High to Low
Impedance Adapter
7000
$
The Shure A15LA line adapter features a balanced
bridging input with 50 dB attenuation. Use it to
connect high-level line or aux outputs to lowimpedance microphone inputs. It will attenuate the
output from such devices as mixers, tape recorders,
tuners, or phono preamps to make them compatible
with balanced low-impedance units. It can be directly
connected to either balanced or unbalanced sources.
$
99
A15LA
39
Mic Splitters
Whirlwind’s IMP
Splitter1X3 provides
one low impedance
XLR input to three
low impedance XLR,
SPLITTER1X3
transformer-isolated outputs
with separate ground lifts.
Splitter 1X2 (not shown) offers two XLR outputs.
SPLITTER1X3 1-in, 3-out microphone splitter
$89.99
List $10002
SPLITTER1X2 1-in, 2-out microphone splitter
$
94
$79.99
List 85 114
Phantom
Power
Supplies
The PB223
is capable of
powering two phantom powered
microphones with either 12V DC or 48V
DC. Since it uses a 100 kHz
switching power supply
there is no audio noise
generated. It also has an
output pull-down resistor so
it will work with any mixer
and has 2 DC jacks so several
units can use one power
adaptor (included).
The PB23 is identical except it
powers a single mic at 12V
or 48V selectable voltage.
PB223
List $9000 $6429
PB23
List $5000 $3495
PB223
PB23

wireless microphones

Transcription

Similar documents

Multi-Sync BTH-300 to Radio and/or Mobile

"PRO Series" VHF Wireless Systems

SC-2300 spec

View catalog in full page - Berube`s Truck Accessories

Professional Audio Analyzer PAA3X

CDMiX 1

Spec Sheet - Performance Audio

Dual 1073 Mic Preamps with 192kHz Digital Output. - ams

Two Legendary 1073 Mic Preamps in a Single - ams