Traditions in High Performance Professional Power Tools

Transcription

Professional Power Tools & Special Equipment
Traditions in High Performance
SAFETY
Felisatti power tools comply with all
safety requirments provided in
EN 50144 and EN 60745. All tools are
protectively insulated and marked with
the double insulation square safety
mark.
contents
symbols
Ni-Cd
Li-ion
Ni-Cd battery type
LED light
Distance between
guide stops
Cordless
4-16
Constant electronics
Laser line
Drills
17-25
Overload-protection
clutch
Working possibility
from 0 ° to 90 °
rotary and demolition hammers
26-34
Electronic overloadprotection clutch
Working possibility
at 45 °
MIXERs
35-39
Electronic speed
regulation
angle grinders
40-47
Active antivibration
system
straight grinders
48-49
Antivibration handle
Wall chasers
50
2 working modes
Hammering action
polishers AND SANDERS
51-63
3 working modes
Anti restarting
system
saws
64-71
SDS Plus
Light weight
Planers
72-75
SDS Max
Cutting lenght
adjustment
routers
76-87
2-speed
Rotating rear handle
DOWELER and BISCUIT JOINERS
88-91
Pendulum
movement
Quick change
mitre saws
92-98
Electronic disc brake
Quick fix
vacuum cleaners
99-102
Reverse
3
VCS
st
ar
t
so
ft
Soft strart
2
1
electronic
ID IPT by TUV Rheinland Iberica, which
IPT was certified by standards
ISO 9001-2008:
TÜV Rheinland Ibérica Inspection,
Certification and Testing, S.A.
En calidad de entidad certificadora
acreditada por ENAC para:
Sistemas de Gestión de Calidad
conforme a ISO 9001:2008
con nº 14/C-SC027
Certifica que la organización INTERSKOL
POWER TOOLS, S.L. ha realizado la
auditoria de Certificació.
Following ID 9105065784 , to web
www.tuvdotcom.com, you can always
find certificates IPT, which were assigned
by TUV.
IPT S.L. reservs the right to make
changes or improvements to its
products without incurring any
additional obligation.
2-3
Li-ion battery type
EC DECLARATION OF CONFORMITY
We declare under our sole responsibility
that Felisatti products are in conformity
with the following standards documents:
EN 60745-1:2008, EN 55014-1:2006+A1,
EN 55014-2:1997+A1+A,
EN61000-3-2:2006+A1,
EN 61000-3-3:2008.
HISTORY
LED
Adapter to dust
removal system
VCS
antivibration
Felisatti Factory
Alabuga, Russia
The history of FELISATTI brand includes more than 65 years of
presence in the tools market as a respected manufacturer. The
products with this label have been popular among masters in
Italy and Mediterranean area.
Market experts know very well that Felisatti was one of the
pioneers in the modern wood processing electrical tools
industry. Currently the company has powerful facilities
producing wide range of tools that meet any demand not only
in wood processing but also in civil construction working with
concrete and metal at high professional level.
Felisatti Factory
Ripoll, Spain
Felisatti Factory
Jinhua, China
Sales
Own plants
Own suppliers
Felisatti History
1961 FELISATTI first in the
world invented the MITER
SAW WITH ROTATING
TABLE (model SF60). This
patent has been effective
for more than 25 years.
During a quarter of a
century (while the patent
was valid) no competitor
was able to offer any
better technical solution
in this field!
1949 company was established by
Mr. Fellisatti in ITALY.
RAPTOR and T-REX were introduced
These models set new standards
of durability and precision.
The precision of these saws is
measured by decimals of degrees
being one of the best parameters.
But which is even more important
for a professional is the fact that
the precision of the angle does
not decrease with time – it is
achieved through unique design
of the hinge with increased
diameter of joint. Eventually, the application of compact
Italian induction motor allowed Felisatti mitre saws to
increase service life by several times ensuring failure-free
operation time.
1974 One of the key innovations of this period was a new
generation of miter saws with rotating table and tilting
head that was introduced in 1974. These models featured
innovational Click-Clack table control system which promptly
and precisely set sawing angles. This invention of Felisatti
designers is currently used by all miter saw manufacturers.
The company held around 400 international
patents for different inventions
1949
1951
1957
1961
1975
1951 FELISATTI
factory started
production in Ferrara
near Venice.
The 90s are marked by fast
development of industrial cooperation
with many leading brands placing
orders for manufacturing of Felisatti
machines and sold under OEM brands.
the company has been focusing on
innovatiVE products
1957 The company designed the world’s first
portable miter saw SF18 for wood and light metal
alloy sections. The new product gained general
recognition and respect of other manufacturers.
www.felisatti.es
1990
2010 FELISATTI products range
was complemented by products
of Spanish factory Freud/Casals
which is well known for its
professional wood processing
tools, heavy perforators and
wide range of industrial handheld mixers. The factory also
joined Interskol Group. After
restructuring, a part of FELISATTI
equipment was relocated to
Spain and Russia. Optimization of production facilities and
logistics reduced products costs and optimized retail market
final price. Traditional distributors of the brand all over the
world optimistically perceived the development of the Brand
and the enlargement of the product range.
INTERSKOL GROUP gained control over
FREUD/CASALS power tool plant
2004
2006
2004 advanced 5-coordinate
maching centers installed in
the factory. It allows to process
simultaneously 150 different
work piece with the unmatched
precision up to 10 micron under
control of only one operator.
2009
2010
2011
FELISATTI become part of
INTERSKOL Group
Rapid globalization in the 20th
century became a serious challenge
for FELISATTI that traditionally focused
on the high quality and technical
improvement of their products rather
than large scale production. The
need for serious changes in order
to challenge the tough competition
led to the acquisition in 2009 by the
industrial group INTERSKOL who reintroduced FELISATTI as a global player
with high goals.
2012 launch of renewed FELISATTI product
line in Europe. Foundation of European HEAD
QUARTER in Ripoll, Spain.
Currently, the main task of the company
is providing integrated process solutions
“Professional power tools range
complemented with accessories line” for
the construction industry, metal processing
industry, woodworking, carpentry and
finishing.
2|3
Cordless Drills, Screwdrivers
SD10,8L2
DC10,8L2
Li-ion
LED
SPECIAL FEATURES
The shortest design in the 10.8 V class for optimum handling in
tight spaces (SD10,8L2)
Ergonomic design with soft-grip handle
2-speed planetary gearbox offers powerful support for both
drilling and screw driving applications
Adjustable torque regulator for precise adjustment of the
fastener tightening force
Ergonomic trigger with variable speed regulation
TECHNICAL DATA
Cordless drill
DRIVERS,
Screwdrivers,
SAWS and
ROTARY HAMMER
www.felisatti.es
www.felisatti.es
Cordless Impact Drills, Screwdrivers
Cordless Impact Screwdrivers
Cordless Impact Wrenches
Cordless drill Ni-Cd
Cordless Rotary Hammer
Cordless Reciprocating Saw
Cordless Circular Saw
Cordless Jig Saw
LED Battery-powered Flashlight
5
7
8
10
11
12
13
14
15
16
2 x Li-Ion batteries and fast (30 min) charger
(cell producer: Samsung)
Automatic spindle lock when releasing the switch
Strong, high quality, locking RÖHM chuck ensures reliability and
easy change of tooling (DC10,8L2)
Bright LED-lighting of the working area
Battery charge status indicator informing the user about
remaining operation time Before recharge
SD10,8L2
DC10,8L2
Battery voltage
V
10.8
10.8
Battery capacity
Ah
1.3
1.3
Battery type
Li-Ion
Li-Ion
Battery's full charging time
min
30
30
No load speed (1st / 2nd gear):
min-1
0-350 / 0-1300
0-350 / 0-1300
Maximum torque
Nm
25
25
Torque settings
Nr
18+1
18+1
Max. drilling diameter in wood
mm
15
15
Max. drilling diameter in steel
mm
10
10
Max. screw diameter
mm
6
6
Chuck capacity
min./max.
-
0.8 - 10
Tool holder
inch (mm)
1/4" (6.35)
-
Weight (with battery)
kg
0.90
1.00
Item No.
177240370
170250470
Standard equipment
2 x Li-Ion batteries, Fast (30 min) charger, Plastic case
.
4|5
Cordless Impact Drills, Screwdrivers
DC10/14,4L2
DC13/14,4L2
DC13/18L2
DC13/14,4IL2
DC13/18IL2
Li-ion
Li-ion
LED
LED
SPECIAL FEATURES
SPECIAL FEATURES
Ergonomic and light design with soft-grip handle
Adjustable torque regulator for precise regulation of the fastener
tightening force
2 x Li-Ion batteries and fast charger
(cell producer: Samsung)
TECHNICAL DATA
Automatic spindle lock when releasing the switch
easy change of tooling
remaining operation time before recharge
Up to 65 Nm of high torque ensures drilling (up to 36 mm) and
screw driving (up to 10 mm)
25 torque adjustments + 2 separate modes for drilling and
impact drilling
2 x Li-Ion batteries and fast charger (cell producer: Samsung)
DC10/14,4 L2
DC13/14,4 L2
DC13/18L2
TECHNICAL DATA
easy change of tooling
remaining operation time Before recharge
Up to 70 Nm of high torque ensures drilling (up to 36 mm) and
screw driving (up to 10 mm)
Additional handle for tight grip during operation with maximum
load or Impact drilling
DC 13/14,4IL2
DC 13/18IL2
Battery voltage
V
14.4
14.4
18
Battery voltage
V
14.4
18
Battery capacity
Ah
1.5
1.5
2.6
Battery capacity
Ah
1.5
2.6
Li-Ion
Li-Ion
Li-Ion
Battery type
Li-Ion
Li-Ion
35
60
Battery type
min
35
35
60
min
min-1
0-450/0-1450
0-350 / 0-1800
0-400 / 0-1900
min
0-350 / 0-1800
0-400 / 0-1900
Maximum torque
Nm
30
65
70
Maximum torque
Nm
65
70
Torque settings
Nr.
25+1
25+1
25+2
Torque settings
Nr.
25+1
25+2
mm
20
36
36
mm
36
36
mm
10
13
13
mm
13
13
Max. screw diameter (in wood)
mm
10
10
10
Max. screw diameter (in wood)
mm
10
10
Chuck capacity
min./max.
0.8 - 10
1.5 - 13
1.5 - 13
Chuck capacity
min./max.
1.5 - 13
1.5 - 13
kg
1.50
1.60
1.90
kg
1.70
2.00
170250570
170250670
170250870
170250770
170250970
Item No.
Standart equipment
www.felisatti.es
2 x Li-Ion batteries 1.5 Ah or 2.6 Ah , fast charger, belt holder, plastic case.
Item No.
Standart equipment
-1
2 x Li-Ion batteries 1.5 Ah or 2.6Ah , fast charger, belt holder, plastic case.
6|7
SD14,4IL
SD18IL
SD10,8IL
Li-ion
SPECIAL FEATURES

Li-ion
SPECIAL FEATURES
Ergonomic design with rubberized handle
Compact base length of only 155 mm
Metal gearbox casing ensures high reliability
High torque (100 Nm) in a compact size (SD10,8IL)
Universal HEX 1/4” holder allows to use standard drills with
hexagonal shank of suitable size and any other bits that meet
1/4” standards
2 x Li-Ion batteries and fast (30 min) charger (cell producer:
Samsung)
Battery status indicator informing the user about remaining tool
operation time until charging is required.
Short ergonomic design with rubberized handle;
Metal gearbox casing ensures high reliability;
High torque (up to 150 Nm) and high impact rate (3,200 bpm) for
fast work progress when driving screws in metal and wood
Universal HEX 1/4” holder allows to use standard drills with
hexagonal shank of suitable size and any other bits that meet
TECHNICAL DATA
Impact Screwdrivers are
extremely useful when used
with long screws in timber
construction
Power indicator informes
about the battery charge level
30 minutes fast charging
process for 10,8V and 14,4V Liion batteries
SD10,8IL
SD14,4 IL
SD18IL
V
10.8
14.4
18
Battery capacity
Ah
1.3
1.5
2.6
Li-Ion
Li-Ion
Li-Ion
min
30
35
60
No load speed
min-1
0 - 2400
0 - 2400
0 - 2300
Impact rate
min-1
0 - 3000
0 - 3200
0 - 3200
Maximum torque
Nm
100
145
150
Tool holder
hexagon socket
["] (mm)
1/4” (6.35)
1/4” (6.35)
1/4” (6.35)
kg
0.90
1.40
1.50
177240470
177240570
177240770
Item No.
Standart equipment
www.felisatti.es
1/4” standards;
2 x Li-Ion batteries and fast charger (cell producer: Samsung)
Bright LED-lighting of the working area;
operation time until charging is required.
Battery voltage
Battery type
Compact and powerful
SD10,8IL reach up to 100 Nm of
torque
LED
LED
2 x Li-Ion batteries, fast charger, belt holder, plastic case
8|9
Cordless Drills Ni-Cd
Li-Ion Impact Wrenches
Advantage:
Tangential impact allows to produce up to
240 Nm torque with almost zero reactive
(back) component .
WD14,4IL
WD18IL
Li-ion
LED
DC10/12N2
DC13/14,4N2
Ni-Cd
LED
SPECIAL FEATURES
SPECIAL FEATURES

Ultra-short base 155 mm long
1/2” Square efficiently transmits tangential impacts (pulses) to
the bit;
TECHNICAL DATA
2 x Li-Ion Batteries and fast (30 min) charger (cell producer:
Samsung)
Bright LED lighting with a forced activation button
operation time until charging is required
WD14,4IL
WD18IL
Battery voltage
V
14.4
18
Battery capacity
Ah
1.5
2.6
Li-Ion
Li-Ion
Battery type
min
35
60
No load speed
min-1
0 - 2200
0 - 2100
Impact rate
min-1
0 - 3200
0 - 3200
Maximum torque
Nm
230
240
Tool holder
hexagon socket
["] (mm)
1/2” (12.7)
1/2” (12.7)
kg
1.50
1.60
Item No.
Standart equipment
www.felisatti.es
177240670
177240870
2 x Li-Ion batteries 1.5 A·h or 2.6 Ah, fast charger, belt holder, plastic case.
Ergonomic design with soft grip
Two-speed gearbox with metal planetary gears
Adjustable torque regulation for precise selecting the fastener
tightening force
2 x Ni-Cd batteries and 60 min charger
TECHNICAL DATA

Automatic spindle lock when On/Off switch is released
Bright lighting of the working area
Indicator of battery charge status
Ni-Cd batteries are not susceptible to low temperatures during
outdoor use in winter.
DC 10/12N2
DC 13/14.4N2
Battery voltage
V
12
14,4
Battery capacity
Ah
2
2
NiCd
NiCd
Battery type
min
60
60
min-1
0-400/0-1400
0-400/0-1400
Maximum torque
Nm
17
19
Torque settings
Nr.
15+1
15+1
mm
25
30
mm
10
13
Max. screw diameter
mm
6
6
Chuck capacity
min./max.
0.8 - 10
1.5 - 13
kg
1.80
2.00
170260170
170260270
Item No.
Standart equipment
2 x Ni-Cd 2Ah batteries, charger, standard two-side bits, plastic case.
10 | 11
Cordless Reciprocating Saw
Cordless Rotary Hammer
2,8 J
CT EN
IMPA
E RG Y
RH26/36CVR
RS135/18L
Li-ion
Li-ion
SPECIAL FEATURES
3-mode cordless rotary hammer: Drilling, impact drilling and
hammering operations
Ergonomic design with rubber-coated handle for better tool
gripping during operation
Highly efficient two-level vibration protection significantly
reduces and suppresses both high frequency and low frequency
vibration
RH26/36CVR
TECHNICAL DATA
Battery voltage
Additional handle for tight tool gripping and controlling during
operation
Robust high-quality RÖHM drill chuck
Battery status indicator informing operator when it is necessary
to charge the battery
Comes complete with a keyless chuck that also makes it suitable
for drilling in wood and metal with straight-shank drill bits
V
Battery type
Cordless reciprocating saw is an universal tool for sawing almost any materials (wood, plastic, metal, foam concrete and AE concrete,
plasterboards, bricks, etc.). It is a Useful tool for carpenters, finishers, metal workers, installers of framework structures and rescue service
personnel.
SPECIAL FEATURES
Ergonomic design with rubber-coated handle for better tool
gripping during operation
Adjustable depth guide for limiting sawing depth
Speed regulator of the intensity of the double-strokes of the saw

Easy quick-change of the saw blade
Long stroke reduces sawing time
Battery status indicator early informing the operator about
necessity to charge the battery
36
Li-Ion
Battery capacity
Ah
2.6
Battery full charging time
min
30
No load speed
min-1
0-1100
Number of impacts with minimum load
imp/min
0-5010
Single impact energy
J
2.8
Chuck type
SDS Plus
TECHNICAL DATA
Battery voltage
RS135/18L
V
Battery type
18
Li-Ion
Battery capacity
Ah
min
30
No load speed
min-1
0 - 2500
2,6
Max. concrete drilling diameter
mm
28
Max. brick drilling diameter (with core bit)
mm
68
Length of stroke
mm
30
Max. wood drilling diameter
mm
30
Cutting depth: - in wood
mm
135
Max. steel drilling diameter
mm
13
- in steel
mm
6
Weight
kg.
4.80
- in aluminium
mm
20
kg.
4.00
Item No.
Standart equipment
www.felisatti.es
178110170
2 x Li-Ion batteries 2,6 A·h , fast (30 min.) charger, additional handle,
quick-change drill chuck RÖHM, plastic case, drilling depth guide.
Weight
Item No.
Standart equipment
171000170
Adjustable depth guide, 2 x Li-Ion batteries 2,6 A·h, fast charger, plastic case.
12 | 13
The right tool for precise and fast cutting of wood, plastic, plywood, chipboard, oriented strand board, MDF and other similar composite
materials. This device is designed for sawing and cutting sheeted materials when permanent power supply is not available or when usage of
230V mains is forbidden according to safety regulations.
SPECIAL FEATURES
Ergonomic design with rubber-coated handles for better grip
Small weight and optimum weight distribution of the tool
allows the work with one hand
Cast platform with parallel guide ensuring high sawing precision
TECHNICAL DATA
Battery voltage
Two high capacity 2.6 Ah Li-Ion batteries and fast charger
(cell producer: Samsung )
Electronic brake instantly stops the saw after button is released
Battery status indicator showing remaining time of operation
CS165/18L
V
Battery type
Ergonomic design with rubber-coated handle
Cast platform with a plastic pad for protection of the surface from
scratches
Easy quick change system of saw blades
Regulator of pendulum action amplitude
TECHNICAL DATA
JS100/18L
Battery type
Battery capacity
Ah
2,6
min
30
- wood
mm
100
- steel
mm
6
- alum
mm
20
Nr. of strokes per min.
min
0 - 2600
Length of stroke
mm
25
Bevel angle
˚
0 - 45˚
Pendulum action settings
pcs
4
Weight
kg.
3.80
min
30
Disc size
mm
165
Disc mounting hole diameter
mm
20
No load speed
min-1
4000
Cutting depth in wood at 90°
mm
57
Cutting wood in wood at 45°
mm
40
Cutting wood in wood at 50°
mm
36
Weight
kg.
3.50
175010170
Circular saw with cast platform, 2 x Li-Ion batteries 2,6 A·h, fast (30 min) charger, parallel
guide, plastic case, key to change the disk, pipe branch to connect the dust removal system.
3
2 x 2.6 Ah Li-Ion batteries and fast charger (cell producer: Samsung )
Speed regulation
operation time until charging is required
Li-Ion
2,6
2
SPECIAL FEATURES
Battery voltage
Ah
www.felisatti.es
Li-ion
18
Battery capacity
Item No.
Standard equipment
JS100/18L
1
Li-ion
st
art
CS165/18L
soft
Cordless Jig Saw
Cordless Circular Saw
Max cutting capacity in:
Item No.
Standard equipment
V
18
Li-Ion
-1
175020170
2 x Li-Ion batteries 2,6 Ah, fast (30 min) charger, parallel guide, plastic case
14 | 15
LED Battery-Powered Flashlight
T14,4/18L
Li-ion
LED
Efficient self-contained light source with adjustable three-level light intensity. It can be powered both by 14.4 V and 18 V batteries. The
flashlight runs for more than 20 hours on one charge and two hinges allow for quick and precise adjustment of beam direction.
TECHNICAL DATA
T14,4/18L
Battery voltage
V
14.4
18
Battery capacity
Ah
1,5
2,6
Battery type
Li-Ion
Number of LEDs
pcs
9
LED Head Pivot [°]
[°]
90
Handle Pivot [°]
[°]
130 (with 3 positive stops)
"Run-time[hr]
(9pcs LED Setting)"
[h]
Number of intensity light levels
Weight (w/o battery)
10
20
3
kg.
Drills
Impact Drills
Drywall Screwdriver
High Torque Drills
Magnetic Drills
18
20
23
24
25
0.35
Item No.
179030170
Standart equipment
Carton box. Battery not included in package.
www.felisatti.es
DRILLS, impact drills,
high torque and
magnetic drills
www.felisatti.es
16 | 17
Drills
D10/350E
D13/650E
3
1
2
SPECIAL FEATURES
D13/700GE
D16/850GE
2
SPECIAL FEATURES
Compact and lightweight non-impact drills designed to make
small diameter holes requiring high precision in confined spaces
Ergonomic soft grip handles
Electronic speed regulation
The drill housing has a special clip to secure the tool on operator’s
TECHNICAL DATA
belt which is especially convenient for working at height
Lower weight and compact size of the drills reduces the load on
the operator’s hands
The design of D13/650 allows the tool to be secured in a drilling
stand (standard 43 mm shank)
D10/350E
Low-speed medium-power drill with metal gearbox casing for
demanding and prolonged construction operations (D13/700GE)
Cylinder saws, hole saws and Fastener bits could be used with
this model (D13/700GE)
Left-right rotation trough rotating brush holder provides equal
speed levels on both sides
D13/700GE
D16/850GE
710
850
V~Hz
230 ~ 50
230 ~ 50
min
0-1400
0-1000
Input power
W
350
650
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Input power
W
No-load speed
min-1
0-3000
0-2800
Rated voltage
3/8’’ - 24UNF
1/2’’ - 20UNF
No-load speed
Work shaft thread
High-power nonimpact low-speed drill with metal gearbox
housing suitable for all possible tasks related to construction
of timber buildings and metal structure assembly work.
(D16/850GE)
Fully suitable for drilling deep holes with solid screw twist bits.
(D16/850GE)
D13/650E
TECHNICAL DATA
Max. diameter of drilling in:
-1
Maximum diameter of drilling in:
- metal
mm
10
13
- metal
mm
13
13
- wood
mm
20
30
- wood
mm
35
35
Chuck capacity
mm
0.8 - 10
1.5 - 13
Chuck capacity
mm
1 - 13
1 - 13
Weight
kg
1.23
1.93
Weight
kg
2.60
2.7
130080679
130080479
Item No.
130090879
130090979
Item No.
Standart equipment
www.felisatti.es
3
1
Drills
Additional handle (D13/650E), drilling depth guide (D13/650E).
Standart equipment
Additional handle, drilling depth guide.
18 | 19
Impact Drills
Impact Drills
DI16/850GE2
3
1
2
DI16/850GE2
DI16/1000GE2
DI16/1050GE2
2
3
1
DI13/650E
DI13/820GE2
(DI13/820GE2)
SPECIAL FEATURES
SPECIAL FEATURES
Ergonomic handles with rubberized cover for comfortable grip
Two main operating modes: rotation and rotation with impact
for working with concrete and bricks
TECHNICAL DATA
In contrast to the rotary hammers the impact drills are especially
suitable for working with hard but fragile materials such as
bricks, ceramics, tiles, etc. where excessive energy of single
impact damages the material around the hole.
DI13/650E
DI13/820GE2
Input power
W
650
810
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
No Load speed
min-1
0 - 2800
0- 13280 / 0-32000
Impact rate
min-1
0 - 44800
0-830 / 0-2000
1/2’’-20UNF
1/2’’-20UNF
Work shaft thread
Maximum diameter of drilling in
High-power impact drills with metal gearbox housing suitable
for all possible tasks related to construction of timber buildings
and metal structure assembly work
Ergonomic handles with rubberized cover for comfortable grip
Two main operating modes: rotation and rotation with
hammering (drilling) for working with concrete and bricks
2-speed metal gearbox
TECHNICAL DATA
Left-right rotation trough rotating brush holder providing same
speed levels on both sides.
In contrast to the rotary hammers the impact drills are especially
suitable for working with hard but fragile materials such as
bricks, ceramics, tile, etc. where excessive energy of single
impact damages the material around the hole.
DI16/850GE2
DI16/1000GE2
DI16/1050GE2
Input power
W
850
1010
1050
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
No Load speed (1st / 2nd
speed)
min-1
0-1100 / 0-2500
0-830/0-2000
0-830/0-2000
Maximum diameter of
drilling in
- steel
mm
13
13
- concrete
mm
18
20
20
- wood
mm
30
35
- steel
mm
16
16
16
Chuck capacity
mm
1.5 - 13
1.5-13
- wood
mm
35
40
40
1 - 13
1,5-13
1,5-13
3.00
2.95
3.00
130080979
130070679
2 Speed
Weight
Item No.
Standart equipment
www.felisatti.es
kg
1.97
130080579
■
Chuck capacity
2.77
Weight
130070379
Item No.
Standart equipment
Additional handle, drilling depth guide
kg
130070479
20 | 21
Impact Drills
Drywall Screwdriver
DI22/1200GE2
SPECIAL FEATURES
2
3
SDF8/700ER
SPECIAL FEATURES
High-power impact drills suitable for all possible tasks related to
construction of timber buildings and metal structure assembly
work
2-speed metal gearbox housing
TECHNICAL DATA

Electronic speed pre-selection
Trigger speed control switch
High torque
Closed D-handle for additional safety and comfort
Well balanced for easy handling and maneuverability
Optimum coordination of torque and speed enables a wide
range of applications
Precise screw driving to a constant depth due to precise shut-off
clutch
Electronic speed regulator
Wide electronic switch with locking button for continuous
operation
Aluminium adjustable depth stop
Ergonomic soft grip handle
Forward/reverse rotation
Practical belt clip
DI22/1200GE2
Input power
W
1200
Rated voltage
V~Hz
230 ~ 50
No Load speed (1st / 2nd speed)
min-1
0-830/0-2000
TECHNICAL DATA
SDF8/700ER
Input power
W
701
- concrete
mm
35
Max. screw diameter
mm
6
- steel
mm
22
Tool holder capacity inner hexagon
mm
6.35
- wood
mm
50
No load speed
min
0 - 4000
3-16
Torque
Nm
10
3.60
Weight
kg
1.82
Item No.
130070579
Item No.
137100170
Standart equipment
Standart equipment
Aluminium adjustable depth stop
Chuck capacity
Weight
www.felisatti.es
3
1
1
2
kg
-1
22 | 23
High Torque Drills
Magnetic Drills
DMF23/1150VSE
SPECIAL FEATURES
Electronic torque limiter ensures safety of operator
Two-speed metal gearbox
Constant electronics maintains the speed irrespective of the
applied load
Various speed pre-selection allows application with challenging
materials
TECHNICAL DATA
Soft Start
Standard 43 mm shank allows to secure the drill in the drilling
stand for stationary drilling
Cross-shaped structure of the handle enhances safety of
operator even with maximum loads and ensures high precision
of work.
DMF23/1150VSE
DMF32/1600VSE
Input power
W
1150
1600
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
min-1
120-480 / 225-970
130-280 / 240-510
Torque
Nm
54 / 26
85 / 46
Bit adaptation cone
Morse
2
3
- Steel
mm
23/13
32/16
- Aluminium
mm
32/16
50/25
- Wood
mm
60/32
80/40
43
63
4.40
5.80
131120270
131140270
head setting neck
Weight
Item No.
Standart equipment
www.felisatti.es
kg
Additional handle, knock off key,
st
art
MD045
MD060
soft
DMF23/1150VSE
DMF32/1600VSE
st
art
Drill with a magnetic holder is intended for drilling holes of up to 60 mm diameter in steel constructions using special drilling bits with
Morse taper shank of MT3 type. The drill could also be used with metal-working milling cutters. Magnetic holder helps to quickly and
reliably fix drill position on the processed material
soft
Special high-precision low-speed non-impact drill for hard materials
and for drilling small diameter but deeper holes.
Morse cone No.2 ensures precise and reliable locking of special bits
SPECIAL FEATURES
High-torque drill at the magnetic holder with long spindle
stroke intended for trepan and solid drilling
Built-in container for lubricant/coolant liquid
TECHNICAL DATA
Automatic coolant feeding
Magnetic base characterized by a high holding force ensures
safe operation of the drill
MD045
MD060
Input power
W
1000
1600
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Max. diameter in steel
mm
45
60
min-1
170 - 570
130-280 / 240-510
Torque
Nm
49
86/46
5/8’’ x 16 / Weldon
MT3
Tool holder
Magnetic holding force
Kn
14
17
Weight
kg
13.00
23.00
Soft start
■
■
Constant speed providing electronics
■
■
Overload protection clutch
■
■
Item No.
909810270
909810170
Tool holder
5/8’’x16 / Weldon, suitcase
automatic lubrication system
Tool holder quick fix
MT3, Suitcase
automatic lubrication system
Standart equipment
24 | 25
Rotary Hammers SDS-plus
+
RH18/450ER
RH22/620ER
3
1
2
Lightweight two-mode professional rotary hammers most efficient for drilling holes in concrete, stones and bricks.
Ideally suitable for series of light anchoring operations.
SPECIAL FEATURES
2-modes: drilling and hammer drilling
Left-right rotation trough rotating brush holder provides same
Increased impact rate of maximum 7500 min-1 ensures faster
drilling operations in most commonly used diameters 6, 8, 10
mm (RH18/450ER)
Safety clutch protects operator from injuries
TECHNICAL DATA
Rotary hammers,
demolition hammers
www.felisatti.es
26
Rotary Hammers SDS-Max
Demolition Hammers SDS-Max
Drill bits and Chisels
31
32
34
RH18/450ER
RH22/620ER
450
620
Rated power
W
Rated voltage / frequency
V~Hz
230 ~ 50
230 ~ 50
No-load speed
min
-1
0-1650
0-1100
No-load hammer rate
min
-1
0-7500
0-5060
Impact energy
J
1,2
2,2
2
2
Working modes
Drilling diameter in concrete
mm
18
22
Drilling diameter in steel
mm
13
13
Drilling diameter in wood
mm
24
30
Weight according EPTA-Procedure 01/2003
kg
2.00
2.50
138170379
138170479
Item No.
Standart equipment
www.felisatti.es
Electronic speed regulation ensures drilling precision
Compact size and small weight ensure work convenience even
in confined spaces
4 meter power cable with rubber insulation enables the user to
move freely
Ergonomic design with rubberized handle.
Additional handle, Keyed Chuck, SDS Plus adapter, bit holder (RH18/450ER), plastic case.
26 | 27
2,6 J
CT EN
IMPA
3,3J
E RG Y
CT EN
IMPA
E RG Y
RH30/900ER
RH26/800ER
RH30/900ER
RH24/700ER
3
1
2
SPECIAL FEATURES
RH24/700ER
RH30/900ER
3-mode professional SDS-plus hammer drill suitable for:
drilling, hammer drilling and chiseling
Metal gearbox housing
Powerful 3-mode professional hammer drill SDS Plus.
Maximum impact power of 3.3 J
Metal gearbox housing
Left-right rotation trough rotating brush holder provides same
Electronic speed regulation ensures drilling precision
Safety clutch protects operator from injuries and tool from
TECHNICAL DATA
Possibility to attach a regular
chuck with a key wit SDS-plus
adaptor
Rotating brush holder allows
the switch of the rotation from
right to left without loosing
power and speed
3 working modes:
drilling, hammer drilling and
chiseling
RH26/800ER
RH30/900ER
720
800
900
W
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
No load speed
min-1
0 - 1240
0-1250
0 - 1050
No load hammer rate
min-1
0 - 5080
0-5400
0 - 5100
Impact energy
J
2.6
3,0
3.3
3
3
3
Drilling diameter in concrete
mm
24
26
30
Drilling diameter in steel
mm
13
13
13
Drilling diameter in wood
mm
24
28
30
Weight according EPTAProcedure 01/2003
kg
2.90
3.00
3.30
138150170
138370370
138130770
Item No.
Standart equipment
www.felisatti.es
RH24/700ER
Rated power
Working modes
Powerful motor for optimal
performance for drilling in
concrete
damage
move freely
Additional handle, depth stop guide, plastic case.
28 | 29
RHF40/1100VERT
RHF40/1100VERTM
3
1
2
VCS
SPECIAL FEATURES
TECHNICAL DATA
VarioLock functions for locking of the chisel in required position
Auto-stop brushes prevent commutator damage
Service indicator alarms operator 8 hours before the wear out of
carbon brushes
Re-start protection and mains power indicator enhance tool
operation safety
RHF40/1100VERT
RHF40/1100VERTM
Rated power
W
1100
1100
V~Hz
230 ~ 50
230 ~ 50
No load speed
min-1
235-500
235-500
No load impact rate
min-1
1350-2870
1350-2870
Impact energy
J
2 -7.5
2 -7.5
Tool holder system
SDS-Max
SDS-Max
Working modes
3
3
Max. drilling capacity
- Drill bit
mm
40
40
- Core bit
mm
105
105
-
■
6.20
6.40
138130870
138130870
Vibration active system
Item No.
Standart equipment
www.felisatti.es
VCS
SPECIAL FEATURES
2 modes SDS-Max 6 kg. rotary hammers:
hammer drilling and chiseling operations
Due to active vibration AVT system the level of vibration on the
main handle is reduced by 30% (RHF40/1100VERTM)
Constant electronics maintains speed and impact rate under
load ensuring stable and efficient performance
Weight according EPTA-Procedure 01/2003
RH45/1100VE
RH48/1300VE
RH50/1200VE
kg
Additional handle, plastic case
2 modes SDS-Max 8 kg. Rotary hammers:
hammer drilling and chiseling operations
Due to active vibration AVT system the level of vibration on the
main handle is reduced by 30%
Constant electronics maintains speed and impact rate under
load ensuring stable and efficient performance
TECHNICAL DATA
VarioLock functions for locking of the chisel in required position
Auto-stop brushes prevent commutator damage
Service indicator alarms operator 8 hours before the wear out of
carbon brushes
Re-start protection and mains power indicator enhance tool
operation safety
RH45/1100VE
RH48/1300VE
RH50/1200VE
1100
1350
1200
Rated power
W
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
No load speed
min
-1
130-370
200-500
130-370
No load impact rate
min
-1
1400 - 2400
1900-3000
1800 - 2700
Impact energy
J
10
12
14
Tool holder system
SDS-Max
SDS-Max
SDS-Max
Working modes
2
2
2
pcs
16
16
16
- Drill bit
mm
45
48
52
kg
7.30
7.50
7.60
138110270
138180179
Chisel locking positions
Max. drilling capacity
Item No.
Standart equipment
138100270
Additional handle, depth stop guide, plastic case
30 | 31
VCS
HF12,5/1050
H10,5/1200EV
H18/1500EV
2
3
VCS
1
FELISATTI Jack hammers are designed to address a wide range of tasks of professional construction workers.
SPECIAL FEATURES
SPECIAL FEATURES
With its small weight HF12,5/1050 is especially convenient for
application on vertical surfaces, hammering arches, removal of
screed and plaster.
Long lifetime even in the hardest operation thanks to robust
magnesium housing
Vario-Lock: 12 chisel position settings for convenient working
SDS Max chuck with automatic lock allows to set the drills and
other bits with one hand
TECHNICAL DATA
Auto-stop carbon brushes prevent commutator damage
Rubberized main and additional handles for convenient and
tight grip during operation
re-start protection and mains power indicator enhance the
safety of the tool operation
Anti-vibration additional handle rotating at 360° providing
convenience during operation.
Robust magnesium housing
Vibration protection system reduces vibration on the rear
handle by 15%
Vario-Lock: 12 chisel position settings for convenient working
SDS Max chuck with automatic lock allows to set the drills and
other bits with one hand
HF12,5/1050
TECHNICAL DATA
1050
Rated power
Rubberized main and additional handles for convenient and
tight grip during operation
Re-start protection and mains power indicator enhance the
safety of the tool operation
Anti-vibration additional handle rotating at 360° providing
convenience during operation.
H10,5/1200EV
H18/1500EV
W
1200
1500
Rated power
W
V~Hz
230 ~ 50
V~Hz
230 ~ 50
230 ~ 50
No load speed
min
3500
No load speed
min-1
2700 - 3700
1000 - 1900
Impact energy
J
7.5
Impact energy
J
10.5
18
SDS Max
Tool holder system
SDS Max
SDS Max
Tool holder system
-1
pcs
12
pcs
12
12
kg.
5,40
kg
6,40
10,70
Item No.
Standart equipment
www.felisatti.es
138130970
Item No.
Standart equipment
138170679
138170279
32 | 33
Drill Bits and Chisels
DRILL BITS SDS-MAX
DRILL BITS SDS-PLUS
Diameter
mm
Total length
mm
Flute length
mm
930460149
14
340
195
95
930460150
16
340
195
110
45
930460238
16
540
395
6
160
95
930460151
18
340
195
930460205
8
110
45
930460239
18
540
395
930460210
8
160
95
930460160
20
340
195
930460220
10
210
145
930460161
20
540
395
930460227
10
260
195
930460162
22
340
215
930460328
12
260
190
930460163
22
540
415
930460258
12
300
230
930460164
22
800
635
930460257
12
350
280
930460165
24
340
215
930460231
12
460
390
930460166
24
540
415
Diameter
mm
Total length
mm
Flute length
mm
930460167
26
340
215
930460168
28
370
240
930460244
28
570
440
930460169
30
370
240
930460245
30
570
440
930460170
32
370
235
930460246
32
570
435
930460171
32
800
620
930460172
35
370
235
18 x 280
930460154
35
570
435
18 x 400
930460173
38
370
235
18 x 280 x 25
930460174
38
570
435
18 x 400 x 25
930460175
40
370
235
18 x 300 x 75
930460155
40
570
435
18 x 400 x 50
930460176
40
800
620
Diameter
mm
Total length
mm
Flute length
mm
930460206
10
110
45
930460212
10
160
930460203
6
930460208
Cat. Nr.
Cat. Nr.
SDS-MAX CHISELS
Cat. Nr.
1
Cat. Nr.
2
Name
939280201
Point chisel
939280101
Point chisel
939270001
Flat chisel
939270002
Flat chisel
939270004
Spade chisel
939270005
Spade chisel
www.felisatti.es
3
Dimensions
1
1
2
2
3
3
MIXERS
Single-Spindle Mixers
Double-Spindle Mixers
36
38
www.felisatti.es
34 | 35
FELISATTI construction mixers are set for optimum performance and perfect ergonomics. Easy to operate with a straight back and
ergonomically shaped grip handles for mixing liquid and viscous materials such as paints, varnishes and mortar.
SPECIAL FEATURES
MF1200/VE2
MF1600/VE2
soft
st
art
soft
MF800VE
MF1000VE
Powerful reliable motors, with a robust and efficient construction. High torque up to 62 Nm ensuring smooth operation even with high
viscosity materials.
SPECIAL FEATURES
Electronic speed control significantly expands the applications
of the tool
Constant speed electronics maintains pre-selected speed under
heavy loads which ensures proper mixing and prevent splashing
Metal gearbox casing ensures reliability of structure and
TECHNICAL DATA
resistance to high operational loads
Soft start function prevent splashing and enhances convenience
of application
Reliable motor with extended long service life.
of the tool
Electronic safety clutch provides safety for the operator
MF800VE
MF1000VE
TECHNICAL DATA
800
1000
Rated power
W
of application
MF1200/VE2
MF1600/VE2
1200
1600
120-405 / 245-820
105-420 / 215-860
Rated power
W
No load speed
min
150 - 570
170 - 680
No load speed
min
Work shaft thread
ISO
5/8” x 16
5/8” x 16
Work shaft thread
ISO
5/8” x 16
5/8” x 16
Torque
Nm
42
42
Torque
Nm
53/27
62/30
Max. volume
L
30
40
Max. volume
L
70
100
Weight
kg
2.40
4.40
Weight
kg
4.60
4.90
139210170
Item No.
139230170
139230370
Item No.
Standart equipment
www.felisatti.es
st
art
MitreSingle
Saws Spindle Mixers
Mitre Single
Saws Spindle Mixers
-1
139270170
Mixing paddle
Standart equipment
-1
Mixing paddle, quick change tool holder
36 | 37
Double Spindle Mixers
MitreDouble
Saws Spindle Mixers
soft
st
art
soft
st
art
MKF1600/VE2
MKF1200/VE2
Mixing Paddels
pic
Cat. Nr.
Type
Size, mm
Spindle thread
Models
Use
928610970
(R008)
100 x 550
HEX12
MKF1200/VE2
MKF1600/VE2
Universal
Two-spindle construction mixers. High torque up to 62 Nm ensuring smooth operation even with high viscosity materials.
SPECIAL FEATURES
928700270
(R003)
120 x 600
HEX12
MF1200/VE2
Universal
928610670
928610770
928610870
(R009)
(R009)
(R009)
120 x 600
140 x 600
160 x 600
M14
M14
M14
MF800VE
MF800VE
MF800VE
Thick solids
Thick solids
Thick solids
928610570
(R006)
100 x 600
M14
MF800VE
Liquid components
of the tool
Electronic safety clutch provides safety for the operator
TECHNICAL DATA
Quick change adaptors
for easy change of stirrer
attachments
www.felisatti.es
Handles are positioned
further up for a body position
which takes the strain off your
back
No counter-torque acting on
the user ensures light work with
less physical effort
Mixing all types of materials,
including viscous and heavy
materials, quickly and
thoroughly
of application
Spindles rotating in opposite directions prevent transmission of
torque to operator’s hands.
MKF1200/VE2
MKF1600/VE2
Rated power
W
1200
1600
No load speed
min-1
70-250/140-480
60-250/130-490
Work shaft thread
ISO
5/8”x16
5/8”x16
Torque
Nm
57/27
62/30
Max. volume
L
120
170
Weight
kg
6.25
6.40
Item No.
Standart equipment
139260170
139260270
2 x Mixing paddles, 2 x Quick change tool holders
38 | 39
Angle Grinders
AG115/1000
AG115/1000
AG125/1000
(AG115/1000S, AG125/1000S)
st
art
soft
AG115/1000S
AG125/1000S
SPECIAL FEATURES
Compact size and shape of the gear box allows the user to work
in confined spaces
Smaller weight ensures long term operation without fatigue
TECHNICAL DATA
ANGLE GRINDERS,
STRIGHT GRINDERS,
WALL CHASERS
Angle Grinders 115, 125 mm
41
Angle Grinders 230 mm
Cutting Discs
Straight grinders
Wall Chasers
44
47
48
50
AG115/1000
AG125/1000
AG115/1000S
AG125/1000S
Input power
W
1000
1000
Voltage / Frequency
V~Hz
230 ~ 50
230 ~ 50
No-load speed
min
10000
10000
Max. disc diameter
mm
115 / 125
115 / 125
Inner disc diameter
mm
22.2
22.2
Spindle thread
ISO
M14
M14
Weight
kg
2.40
2.40
Soft start and starting current limitation
-
■
Blocking protection
-
■
Self-start protection
-
■
Item No.
134300579
134380379
134300879
134370279
www.felisatti.es
Standart equipment
www.felisatti.es
Convenient protective guard ensuring maximum safety
High-performance motor designed for prolonged operation
Spindle lock for easy and simple disk replacement
-1
Safety guard, additional handle, support washer, lock nut, lock nut spanner
40 | 41
Angle Grinders
Angle Grinders
3
1
2
(AG125/1200CE, AG125/1200CE
Compact size and shape of the gear box
Auto-stop brushes
TECHNICAL DATA
Soft start and blocking protection ensure user safety
Constant electronics keeps the load stable nomater of the
applied pressure
2
3
antivibration
(AG125/1400CSE)
AG115/1200C
AG125/1200C
AG115/1200CE
AG125/1200CE
AG115/1200CS
AG125/1200CS
AG115/1200CSE
AG125/1200CSE
1200
1200
1200
1200
SPECIAL FEATURES

Compact size and shape of the gear box
Auto-stop brushes
Soft start and blocking protection ensure user safety
Input power
W
Voltage / Frequency
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
230 ~ 50
No-load speed
min
10500
3000-10500
10500
3000-10500
Max. disc diameter
mm
115 / 125
115 / 125
115 / 125
115 / 125
Input power
Spindle thread
ISO
M14
M14
M14
M14
Voltage / Frequency
Weight
kg
2.40
2.40
2.40
2.40
Soft start and starting
current limitation
■
■
■
■
Blocking protection
■
■
■
■
■
■
■
■
Overload current protection
■
■
■
■
Constant speed electronics
through current control
■
■
-
-
through RPM measurement
-
-
■
Overheating protection
-
■
-
Item No.
115 mm diam. version
125 mm diam. version
134370379
134370479
www.felisatti.es
electronic
st
art
AG125/1400CS
AG125/1400CSE
VCS
AG115/1200CSE, AG115/1200CSE)
SPECIAL FEATURES
Standart equipment
soft
AG115/1200C / CE / CS / CSE
AG125/1200C / CE / CS / CSE
electronic
1
soft
AG125/1400CS
st
art
AG115/1200C
-1
TECHNICAL DATA
Constant electronics keeps the load stable nomater the applied
pressure
Anti-vibration side handle
AG125/1400CS
AG125/1400CSE
W
1400
1400
V~Hz
230 ~ 50
230 ~ 50
Max. no-load speed
min-1
10500
3000 - 10500
Max. disc diameter
mm
125
125
Spindle thread
ISO
M14
M14
Weight
kg
2.40
2.40
Soft start and starting current
limitation
■
■
Blocking protection
■
■
■
■
■
Overload current protection
■
■
■
■
■
■
■
-
■
through RPM measurement
■
134370579
134370679
134370879
134370879
134370979
134380179
1034800100
134380279
Overheating protection
Item No.
Standard equipment
■
42 | 43
Angle Grinders
Angle Grinders
AG230/2200S1
SPECIAL FEATURES
The lightest model from the grinders range (5.1 kg)
Ergonomic switch with self-start protection and convenient
guard ensure maximum safety
Restart protection prevents the tool from automatically
restarting after a power cut
Rotating rear handle for convenient use in cutting operations
Soft start and starting current limitation ensures the safety of
the operator
TECHNICAL DATA
Easy access to motor carbon brushes to inspect their condition
or replace if necessary
move freely
Spindle lock for simple replacement of disk
Blocking protection (AG22/6SL), detects when the disc is
jammed and shuts down the machine immediately
AG22/6
AG22/6SL
SPECIAL FEATURES
High-performance and efficient motor designed for prolonged
operation
guard ensure maximum safety of angle grinder operation;
Soft start and starting current limitation ensures the safety of
the operator
TECHNICAL DATA
Voltage
V
230
230
Frequency
Hz
50-60
50-60
Input power
W
2200
2200
Input power
W
No-load speed
min-1
6500
6500
Voltage / Frequency
and replace if necessary
move freely
AG230/2200S1
AG230/2400S1
AG230/2600S1
2200
2400
2600
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
6500
6500
6500
Max. disc diameter
mm
230
230
No-load speed
min
kg
5.10
5.10
Max. disc diameter
mm
230
230
230
Spindle thread
ISO
M14
M14
M14
kg
5.50
5.50
5.80
-1
Soft Start and starting current
limitation
■
■
Blocking protection
-
■
Self-Start protection
-
■
Soft start and starting current
limitation
■
■
■
Antivibration handles
-
■
Blocking protection
■
■
■
Item No.
134180279
134180379
Item No.
134180479
134180779
134190179
Standart equipment
www.felisatti.es
st
art
AG230/2200S1
AG230/2400S1
AG230/2600S1
soft
soft
AG22/6
AG22/6SL
st
art
AG22/6
Standart equipment
44 | 45
Cutting Discs
Angle Grinders
ABRASIVE METAL CUTTING DISC
Item No.
Diameter in mm
Bore diameter in mm
Width in mm
921150170
125
22,5
1
921170170
125
22,5
2,5
921420170
230
22,5
1,6
921430170
230
22,5
2,5
Diamond cutting disc "TURBO" for
reinforced concrete
AG230/2200S2
Triangle "T" Type saw blades
soft
VCS
st
art
AG230/2200 S2
AG230/2400 S2
AG230/2600 S2
antivibration
SPECIAL FEATURES
High-performance and efficient motor designed for prolonged
operation
guard ensure maximum safety of angle grinder operation
Restart protection prevents the tool from automatically restarting
after a power cut
Soft start and starting current limitation ensures the safety of the
operator

and replace if necessary
move quite freely
Blocking protection, detects when the disc is jammed and shuts
down the tool immediately
Self-Start protection does not allow the machine to restart after
power current dropout
AG230/2200S2
AG230/2400S2
AG230/2600S2
Input power
W
2200
2400
2600
Voltage / Frequency
V~Hz
230 ~ 50
230 ~ 50
230 ~ 50
No-load speed
min-1
6500
6500
6500
Max. disc diameter
mm
230
230
230
Spindle thread
ISO
M14
M14
M14
kg
5.70
5.70
6.00
Soft start
■
■
■
Blocking protection
■
■
■
■
■
■
Antivibration handles
■
■
■
Overload protection clutch
■
■
■
134180579
134180879
134190279
Item No.
Standart equipment
www.felisatti.es
Item No.
Diameter in mm
Bore diameter in mm
922010170
115
22,5
922050170
125
22,5
922070170
150
22,5
922150170
180
22,5
922260170
230
22,5
Diamond cutting disc "TURBO" for
concrete
"T" Type saw blades
Item No.
Diameter in mm
Bore diameter in mm
922010470
115
22,5
922050470
125
22,5
922070470
150
22,5
922150570
180
22,5
922260470
230
22,5
ADVANTAGES
of Diamond blades in Stone, Concrete or Brick cutting operations
SUPERIOR LIFE

A Diamond blade, matches the cutting capacity of more than 100 abrasive
cutting discs
FAST CUTTING

A Diamond blade cuts at least twice as fast as an abrasive cutting disc
BETTER HANDLING

Much less cutting pressure is necessary thus reducing fatigue and physical
stress on both the operator and the machine
INCREASED SAFETY

The strong bond between the diamond segments and the robust steel core
make the diamond blade a safer product
46 | 47
Straight grinders
Straight grinders
st
art
SGF600CE
SG6/600CE
soft
soft
SG6/750
SG6/1000CE
st
art
SG6/1000CE
Straight grinders are used to grind, sand, hone and polish materials, typically metal but also plastic or wood. The straight grinders are traditionally
used with burrs and rotary files, small artificial stone heads, small cutoff and cleanup disks, different brushes and milling cutters.
SPECIAL FEATURES
SPECIAL FEATURES
Compact, ergonomic design for versatile grinding work
Gear case is made from light alloy reducing total weight of the
tool and enhancing reliability and robustness of the design
Extended spindle tightly secures the tool for high-precision
operations
TECHNICAL DATA
Electronic spindle control for selection of optimum grinding
mode (SG6/1000CE)
Soft start and electronics that provide constant grinder speed
under the load (SG6/1000CE)
Long and slim grinding spindle is particularly suitable for use in
hard-to-reach areas
Electronics for constant speed, even under heavy loads
Gear case from light alloy reducing the total weight of the tool
allowing to enhance reliability and robustness of the design
The designe allows the user to hold the machine with two hands
during operations which require high level of accuracy
SG6/750
SG6/1000CE
TECHNICAL DATA
Electronic spindle regulation for optimum grinding mode
Ergonomic casing and compact size ensure maximum
convenience of operation and minimize fatigue
SG6/600CE is specifically designed with lower speed and high
torque for brushing and polishing metal. Ideal for grinding
surfaces with flap wheels, brushes and other accessories
SGF600CE
SG6/600CE
Input power
W
750
1000
Input power
W
600
600
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
No-load speed
min
27000
20000-27000
No-load speed
min
12000 – 26000
4000 - 9000
Maximum diameter of
grinding wheel/disc
mm
25
25
Maximum diameter of
grinding wheel/disc
mm
25
25
-1
-1
Collet size
mm
6/8
6/8
Collet size
mm
6/8
6/8
Weight
kg
1.40
1.50
Weight
kg
1.50
1.50
132120170
132120270
Item No.
Standard equipment
Item No.
Standard equipment
www.felisatti.es
6 mm collet, 13 mm spanner, 17 mm spanner
132130170
132120370
collets 6 mm and 8 mm, 13 mm spanner, 17 mm spanner
48 | 49
soft
SD230/2200
SD230/2600E
st
art
Wall Chasers
Very efficient in cutting deep and wide channels in concrete surfaces with 2 x diamond blades. The wall chaser is provided with special rollers
ensuring smooth movement even on rough surfaces. If the wall chasers moves off the operating surface the spring-loaded guard covers the
rotating disks ensuring the safety of the operator. The right tool for the professional plumber or electrician.
SPECIAL FEATURES
Powerful motor ensures the smooth operation
Precise adjustment of chasing depth without the use of
additional tools
Quick and easy adjustment of chasing width and depth
TECHNICAL DATA
Efficient dust removal system
Spindle lock significantly simplifies replacement of cutting disks
Spring-loaded guard covering disks when tool does not run
ensures safety of operation
SD230/2200
SD230/2600E
Rated voltage
V
230
230
Rated frequency
Hz
50-60
50-60
Rated power
W
2200
2600
No load speed
min
4500
6600
Max. diameter for diamond
cutting discs
mm
230
230
Mounting bore
mm
22.2
22.2
Slot depth
mm
20-65
20-65
Slot width
mm
3-41
3-41
kg
9.80
9.90
Item No.
Standard equipment
www.felisatti.es
-1
134110979
134180179
2 x 230 mm diamond cutting discs, Spacer discs (4 x 6 mm, 3 x 4 mm), clamping nut, wrench
POLISHERS
and sanders
Polishers
INOX Angle Grinder / Polisher
Brush sander
Random orbital sander
Sanders
Drywall Sander
52
56
57
58
59
62
www.felisatti.es
50 | 51
Polishers
Polishers
DPF180/800
APF180/1010E
SPECIAL FEATURES
Straight polishing machine designed for rough and final
polishing of surfaces, removal of paint, rust and for polishing of
metal parts. (DPF180/800).
The tool features adjustable additional handle which makes it
convenient both for right-handed and left-handed operators
TECHNICAL DATA
Angle polishing machine designed for rough and final polishing
of surfaces, removal of paint, rust and for polishing of plastic
parts and paint coatings. The tool features electronic speed
control in a wide range (AP180/1010VE).
Ideal for polishing vertical surfaces
Mini-polisher suitable for use with one hand.
Suitable for sensitive surfaces such as acryil and water paints,
glass-fiber reinforced plastics, stones
Lightweight and comfortable
180 mm polishing disc diameter
DPF180/800
TECHNICAL DATA
2-stage mechanical gear transmission achieving
Durable metal gearbox housing
Constant electronics keeps the speed regardless of the applied
load
APF180/1010E
Input power
W
800
Input power
W
1010
Rated voltage
V~Hz
230 ~ 50
Rated voltage
V~Hz
230 ~ 50
Polishing disk diameter
mm
180
mm
180
No-load speed
min
4000
No-load speed
min
800-1800
Spindle thread
ISO
M14
Spindle thread
ISO
M14
Weight
kg
1.60
Weight
kg
1.90
Item No.
Standard equipment
www.felisatti.es
-1
132150170
Additional handle, flexible disc, fixed spanner, clamping nut, pin spanner
Item No.
Standard equipment
-1
134530470
Additional handle, flexible disc, clamping nut, pin spanner
52 | 53
Polishers
Polishers
3
1
2
APF180/1300E
APF180/1300VE
3
1
2
(APF180/1300VE)
WG130/1300VE
SPECIAL FEATURES
Combination of powerful motor and reliable light-weight
aluminium gear box
Spindle keylock for fast accessory replacement
Locking power switch for facilitating long-term operation
Quick-change of brushes
Reduced speed trough optimized gear ratio. Speed regulation
makes the tool more versatile during various operations
Supplied with a rubber polishing and a velcro polishing disk.
TECHNICAL DATA
Optimal use for different surface polishing including ferrous
and non-ferrous metals, stainless steel, paintwork materials and
polymers.
D-shaped auxiliary handle enables the force applied on the
working surface to be spread evenly (APF180/1300 VE)
Constant speed electronics keeps the speed under stable range
(APF180/1300 VE)
APF180/1300E
SPECIAL FEATURES
Wet polisher provides consistent results, essential in decorative
stone, marble and concrete applications
Powerful motor with electronic speed stabilization
Quick connect external water supply fitting
Variable speed versatility suitable from fast stock removal to
final polishing
Robust metal gearbox
GFCI integrated in supply cord for electrical safety
Constant speed electronics keeps the speed under stable range
APF180/1300VE
TECHNICAL DATA
Input power
W
1300
1300
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
mm
180
180
Input power
W
1300
No-load speed
min
1000 - 3000
400 - 2200
Rated voltage
V~Hz
230 ~ 50
Spindle thread
ISO
M14
M14
mm
130
-
■
No-load speed
min
400-2200
kg
Weight
Item No.
Standart equipment
www.felisatti.es
kg
-1
2.90
3.00
Weight
134110470
134110670
Item No.
Rubber flexible disk, velcro polishing disk, whool bonnet, auxiliary handle
Standart equipment
WG130/1300VE
-1
3.10
114640270
Safety guard, ploshing disc, auxiliary handle, GFCI supplyed cord
54 | 55
st
art
Brush Sander
soft
INOX Angle Grinder / Polisher
Extremely versatile tool that can be used in various applications due to its wide range of wheel brushes
accessories. Sanding, deburring, smoothing, brushing, matting, polishing as well as wood structuring.
FELISATTI range of ø 110 x 100 x 19 mm Brushes
AP110/1400SE
TYPE
Use
927420470
Fiber brush wheel
Polishing and final finishing
927420170
Abrasive nylon wire brushes
Graining of wood with rustic
effect
927480170
Non woven flap wheels
Satin finish and oxidations
removal.
927430170
Interleaved flap wheels
INOX ANGLE GRINDER / POLISHER
927430470
Abrasive cloth wheels
The special Inox angle grinder has been specifically designed for use with tough materials like stainless steel. High torque and exact right
speed allows the user to work at high productivity on the material. If the operation on the material is too fast a heat discoloration (Bleu) could
be developed.
927470170
Felted wool wheel
For final finishing and bright
polishing
927450270
Brass brush wheels
For heavy brushing work
soft
st
art
Cat. Nr.
APF125/1010
SPECIAL FEATURES
SPECIAL FEATURES
Constant electronics keeps the optimal speed for use on
stainless steel
Soft start and starting current electronics
TECHNICAL DATA
Light weight and comfortable design
Robust metal gearbox
Overload protection
APF125/1010
Electronic speed control allows the selection of optimal
operation mode for any surface
Constant electronics maintains defined operation parameters
irrespective of load change
Special adjustable support rollers allow to set any width of brush
coverage
TECHNICAL DATA
High-power, high-performance motor and metal gear case
enhance reliability, endurance and strength of the tool
Casing with an integrated additional handle and adapter for
connecting the dust removal system.
Two-spline locks secure the brush on the shaft
AP110/1400SE
Power consumption
W
1010
Rated voltage
V~Hz
230 ~ 50
Input power
W
1400
mm
125
V~Hz
230, 240/50
No-load speed
min
4000
Maximum brush size
mm
110 x 115 x 19
Spindle thread
ISO
М14
Brush rotation no-load speed
min
1200 - 3900
Weight
kg
2.00
Weight
kg
134530670
Item No.
Item No.
Standard equipment
www.felisatti.es
Light grinding and finishing
combined. Suited for eliminating
scratches.
Grinding and cleaning. Removes
rust, scratches and welding
marks.
-1
Safety guard, disc clamping nut, spanner, Additional handle
Standart equipment
-1
2.00
134550270
Additional handle, adapter for connecting the dust removal system , plastic case
56 | 57
Sanders
Random Orbital Sander
RGF150/600E
DP207/920M
DP207/920F
Ideal for sanding or polishing wooden or metal surfaces. Equipped with a powerful 600 W motor with electronic speed regulation. The 5
mm orbit eccentricity gives a high quality sanding. Combined with the rotary orbital movement it leaves the surfaces smooth and mark free
ready for vernishing or painting.
An Orbital grinder with a direct drive, one-phase power supply and a floating rotor (DP207/920M)
An orbital grinder with a direct drive, three-phase power supply and a floating rotor. A good solution for a construction site. (DP207/920F)
SPECIAL FEATURES
SPECIAL FEATURES
High power eccentric grinder with a 150 mm plate and 5 mm
eccentricity
Adjustable speed allowing the selection of optimal sanding
mode for a specific surface
TECHNICAL DATA
Efficient dust extraction capacity
Ergonomic soft-grip for comfortable control of the operation
Quick-change velcro type accessories
Induction motor provides high output and low noise
Processing speed does not depend on power supply voltage
fluctuations that is critical in a construction site
A special fastening system for tooling allows using cheap
grinding paper
Ergonomic design and two convenient handles make a long
work not tiresome
An efficient dust removal system and a dust bag help to keep
the work place tidy
RGF150/600E
Input power
W
600
Rated voltage
V~Hz
230 ~ 50
Operating diameter of
platform (plate)
mm
150
No-load vibration frequency
TECHNICAL DATA
DP207/920M
DP207/920F
Input power
W
920
920
Voltage
V
230
400
One phase
Three phase
1500
1500
min
-1
5000 - 13000
Power supply
No-load speed of spindle
min
-1
2500 - 6500
No-load speed
min
Eccentricity
mm
5
Maximum diameter size
mm
207 / 180
207 / 180
Weight
kg
2.40
Weight
kg
14.00
14.00
134190570
-1
Item No.
132900170
Item No.
134190470
Standart equipment
Velcro plate, auxiliary handle, dust collection bag
Standart equipment
Dust collector, sanding paper, key
www.felisatti.es
58 | 59
Sanders
Sanders
TP517/AS
TP517/AS
TP115/350VE
WP115/300
High performance orbital sander for polishing and finishing. Powerful and well balanced, it allows the user to carry out high quality work
without fatigue due to the extreme vibration reduction .
SPECIAL FEATURES
SPECIAL FEATURES
Low vibration on handles due to applied dynamic balance
design allowing operation for a long time with high efficiency w
Cast aluminum alloy base has long service life
TECHNICAL DATA
The ergonomic design with anti-slip surfaces and frontal handle
makes the machine comfortable and efficient to work with.
Start button lock for prolonged operation and low noise level.
TP517/AS
TP115/350VE
Orbital sander particularly suitable for worikng with marble
Equipped with a water injection system for continuous finishing
work with wet abrasive paper or diamond pad
Cast aluminum alloy base has long service life
TECHNICAL DATA
Low vibration on handles due to applied dynamic balance
design allowing operation for a long time with high efficiency
GFCI integrated in supply cord for electrical safety in compliance
to CE regulations
WP115/300
Input power
W
300
350
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Input power
W
300
Platform operating size
mm
115х210
115х210
Rated voltage
V~Hz
230 ~ 50
Vibration frequency No-load
min
-1
10 000
6500
Platform operating size
mm
115х210
Oscilliation frequency No-load
min
-1
20000
13000
Oscilliation frequency No-load
min
2000
Platform vibration amplitude
mm
2
4.5
Platform vibration amplitude
mm
2
Weight
kg
2.90
2.90
Weight
kg
2.90
Item No.
Standart equipment
www.felisatti.es
132780470
132780270
Item No.
Suction pipe
Standart equipment
-1
114640170
Suction pipe , Sanding base with water supply system, GFCI electrical safety
60 | 61
Drywall long reach sander
Drywall sander
APF200/1010LE
APF200/1010E
Wall sander is designed for sanding walls, ceiling and floors. Wide range of applications using different consumables for rough and fine
sanding, polishing and grinding different surface treatment tasks.
SPECIAL FEATURES
SPECIAL FEATURES
Ideal for dry sanding, polishing and finishing of walls, floors,
wood, natural stone and sensitive surfaces
Adjustable speed allowing the selection of optimal sanding
mode for a specific surface
TECHNICAL DATA
Highly efficient dust extraction through numerous extraction
holes on the sanding backing plate
Dust collection nozzle with fast bayonet connector
Convenient D-shaped additional handle for tight grip.
APF200/1010E
Long-reach dry wall sander designed for grinding of walls,
ceiling and floors
Without scaffolding and ladders. The lenght allows to sand walls
and ceiling in up to 3 m high areas.
TECHNICAL DATA
Dust removal channel integrated in the rod and hinge
attachment of the plate allow the use of the sander at any angle.
Electronic speed preselection
APF200/1010LE
Input power
W
1010
Input power
W
1010
V~Hz
230 ~ 50
V~Hz
230 ~ 50
Plate operating diameter
mm
200
Plate operating diameter
mm
200
No-load speed
min
800-1800
No-load speed
min
800-1800
Torque
Nm
3.8
Torque
Nm
3.8
Spindle connection thread
ISO
М14
Spindle connection thread
ISO
М14
Rod length
mm
-
Rod length
mm
1300
Weight
kg
2.90
Weight
kg
3.80
134530170
Item No.
Item No.
Standart equipment
www.felisatti.es
-1
D-shape handle, Flexible velcro pad, protective cover with brush ring
Standart equipment
-1
134530270
Additional handle, Flexible velcro pad, protective cover with brush ring, 6 pcs of 200 mm sanding paper
62 | 63
Circular Saws
SCF165/1200
Precise professional circular saws used for quick, straight cuts across wood boards (crosscuts) or along the board's length (rip cuts). Adjustable
angle mechanism could set the circular saw to make beveled cuts.
SPECIAL FEATURES
Low weight and compact design for optimum handling
Aluminium blade protection guard
Punched aluminium base plate marked with ruler
measurements
TECHNICAL DATA
saws and
Planers
www.felisatti.es
Circular Saws
Jig Saws
Reciprocating Saw
Planers
65
68
71
72
Sawing depth adjustment mechanism
Sawing angle adjustment mechanism
Spindle lock for easy disc replacement
Dust extraction port
SCF165/1200
Input power
W
1200
No-load speed
rpm
4700
Saw blade diameter
mm
165
Max./min. set width
mm
2.5
Saw blade hole diameter
mm
20
Depth of cut at 90°
mm
55
mm
37
Depth setting
mm
0 - 55
Inclination setting
Approx. weight (w/o accessories)
according EPTA Procedure 01/2003
Item No..
Standart equipment
www.felisatti.es

0-45°
kg.
4.20
135150870
Saw blade
64 | 65
Circular Saws
Circular Saws
SCF190/1600S
Precise professional circular saws used for quick, straight cuts across wood boards (crosscuts) or along the board's length (rip cuts). Adjustable
angle mechanism could set the circular saw to make beveled cuts.
soft
SC184/1400
SCF190/1600S
SCF210/1900S
SCF210/1900VES
SPECIAL FEATURES
SPECIAL FEATURES
Low weight and compact design for optimum handling
Aluminium blade protection guard
Punched aluminium base plate marked with ruler
measurements
TECHNICAL DATA

Dust extraction port
Compact hand-held circular saw with deep sawing reach and a
powerful motor
SCF184/1400
TECHNICAL DATA
Soft start to reduce peak current at starting moment.
Constant electronics regulating the rotation speed regardless of
the load; (SCF210/1900VES)
Overload protection. (SCF210/1900VES)
Punched aluminium base plate with plastic protection
SCF190/1600S
SCF210/1900S
SCF210/1900VES
Input power
W
1400
Input power
W
1600
1900
1900
No-load speed
rpm
3800
No-load speed
rpm
4800
5000
2300-5000
Saw blade diameter
mm
184
Saw blade diameter
mm
190
210
210
Max./min. set width
mm
2.5/2.1
Max./min. set width
mm
2.5
2.5
2.5
mm
16
mm
20
30
30
mm
65
mm
63
75
75
mm
46
mm
42
51
51
Depth setting
mm
0 - 65
Depth setting
mm
0 - 63
0 - 75
0 - 75
0-45°
Inclination setting
0-45°
0-45°
0-45°
4.50
5.50
6.00
5.90
135150370
135150470
Inclination setting
Item No..
Standart equipment
www.felisatti.es
st
art
SCF210/1900VES
kg.
Item No..
135280170
Lateral stop, hexagonal key, H.M. saw blade
Standart equipment
kg.
135150270
Saw blade, plastic base protection (SCF210/1900S/VES)
66 | 67
Jig Saws
Jig Saws
JSF65/550E
soft
JSF65/550E
JSF85/701
JSF85/701VE
JSF100/650VE
Powerful, high precision professional jig saw for wood, ferrous and non ferrous metals, plastic materials and others. Electronic speed regulation
and pendulum 3 stage movement. Equipped with quick changing system of the saw blade and tiltable base for miter cuts.
SPECIAL FEATURES

Professional high power jigsaw with metal casing gearbox. The design features improved cooling ventilation on the motor.
SPECIAL FEATURES

Electronic speed pre-selection
3 position pendulum action
Quick tool-free blade changing system
Lock-on switch
Ergonomic soft-grip handle
TECHNICAL DATA
Transparent blade guard
Adjustable base, 0°/15°/30°/45° bevel left or right
Dust extraction adapter
Double insulation
S trong and reliable motor designed for long continuous
operation at significant loads
Air ventilated, metal gearbox casing
Quick tool-free blade change system
Adjustment of the number of blade strokes for selecting the
JSF65/550E
JSF85/701
JSF85/701VE
TECHNICAL DATA
optimum cutting mode for any specific material
3 blade pendulum movement amplitude levels
Dust removal system connection adapter
Plastic pad on the base plate allows sawing operations after
finishing without any risk of scratching the material
JSF100/650VE
Input power
W
550
701
701
Input power
W
650
Voltage and current
V
230
230
230
Wood cutting capacity
mm
100
Frequency
Hz
50-60
50-60
50-60
Aluminium cutting capacity
mm
20
Strokes per minute
min
200 - 2800
3000
300 - 3000
Steel cutting capacity
mm
6
-1
Cutting capacity:
Inclination up to
45º
- wood
mm
65
85
85
Run-out
mm
25
- light alloy
mm
12
10
20
No-load speed
min
500-3000
- steel
mm
6
0
10
kg
2.00
Approx. weight (without
accessories)
kg
Weight
Item No..
Standart equipment
www.felisatti.es
st
art
JSF85/701VE
135530170
3.00
3.00
135530679
135530879
Saw blade, dust suction adapter, sliding skid Hexagonal key
-1
2.40
Item No..
135580170
Standart equipment
Saw blade, dust suction adapter, sliding skid Hexagonal key
68 | 69
Jig Saws
Reciprocating saw
JIG SAW BLADES
Cat. Nr.
Dimentions
Type
Package
(pcs)
935570170
100 x 75 x 2.5
Wood clean cut
5
935560170
100 x 75 x 4.0
Wood speed cut
5
935580170
85 x 57 x 1.2
Metal
5
935550170
132 x 106 x 2.4/5
Multipurpose
5
RSF120/1010E
JSF100/700E
JSF120/710VE
SPECIAL FEATURES
S trong and reliable motor designed for long continuous
operation at significant loads
Air ventilated, metal gearbox casing
Speed regulation of the number of blade strokes for selecting
the optimum cutting mode for any specific material
TECHNICAL DATA
Four blade pendulum movement amplitude levels
Plastic pad on the cast foot ensuring possibility of sawing after
finishing without any risk of scratching the machined surface
JSF100/700E
JSF120/710VE
Reciprocating saw is a multipurpose tool for sawing almost any type of materials including wood, plastic, metal, foam, aerated concrete,
plasterboard and bricks. Almost indispensable tool for carpenters, roofers, finishers, metalworkers, frame structures installers.
SPECIAL FEATURES
Metal gear box housing for high level of reliability
Adjustable stop for cutting depth selection
Speed regulation for efficient operation
Input power
W
705
710
Voltage and current
V
230
230
Frequency
Hz
50-60
50-60
Power consumption
Strokes per minute
min
700-3000
300 - 3000
Cutting capacity
-1
Cutting capacity:
TECHNICAL DATA
Rubber and plastic cover plates at the body of the tool ensure
confortable use and damage of the gearbox
RSF120/1010E
W
1010
- wood
mm
250
- wood
mm
100
120
- non-alloy steel
mm
120
- light alloy
mm
20
20
Stroke rate at no load
min
300-2500
- steel
mm
10
10
Stroke length
mm
28 mm
kg
3.00
3.20
Weight
kg
3.80
135530370
135530879
Weight
Item No.
Standart equipment
www.felisatti.es
Dust suction adapter, sliding skid, hexagonal key
-1
Item No.
135910170
Standart equipment
Dust suction adapter, sliding skid, hexagonal key
70 | 71
Planers
Planers
PF102/1100VES
PPF110/950M
st
art
soft
(PF82/900M)
soft
PF82/710
PF82/900M
st
art
(PF82/710)
SPECIAL FEATURES
Powerful professional planers with integrated electronic protection. The planers range is designed for shaping wood and similar materials.
Planers are used to flatten, reduce the thickness and smoothen uneven surfaces, beveling and rebating.
SPECIAL FEATURES
Planning width of 82 mm
Casted aluminum platform
High rotation speed of the blades ensures high quality surface
finishing
TECHNICAL DATA

Smooth adjustment of planning depth
Inadvertent start interlock
Soft start (PF82/900M)
Constant speed electronics (PF82/900M)
PF82/710
PF82/900M
PF102/1100VES

ensures higher planning quality
Smooth planning depth adjustment
Smooth start and starting current limitation electronics
The planer can be installed in a stationary position using a
special appliance
Casted aluminum alloy base plate
Rebating depth up to 20 mm
A powerful motor for smooth planning of hard wood
Electronic overload protection and stabilization of blades
TECHNICAL DATA
PF102/1100VES
PF110/950M
Input power
W
1100
950
Planing depth
mm
0 – 2.5
0 – 3.5
Input power
W
710
900
Planing width
mm
102
110
No-load speed of cutter drum
min-1
14000
13000
Rebating depth
mm
0 – 15
16
Planing depth
mm
0 – 2.0
0 – 3.0
No-load Speed of cutter drum
min
11000
15000
Planing width
mm
82
82
Motor electronic protection
Yes
Yes
Rebate planning depth
mm
0 – 15
0 – 25
Weight
Weight
kg
3.50
3.00
Item No..
135720370
135740170
Standard equipment
Item No..
Standart equipment
www.felisatti.es
Accessory to secure the planer with its footing upwards to be used as a planning machine
kg
-1
3.50
135720470
7.30
135720270
Parallel guide limit rebating depth (PF102/1100VES);
Chip exhaust adapter (PF110/950M)
72 | 73
Planers
Planers
PF110/2000S
PF180/1500
SPECIAL FEATURES
SPECIAL FEATURES
The planer can be used as a smoothing plane due to its longer
base
Parallel guide with an adjustable angle for inclined planing
Can be used in upside down position as a fully functional
TECHNICAL DATA
stationary machine
Dust exhaust adapter
Special grooves on the planing base make it easier for beveling
Heavy Duty planer with 180 mm cutting width
520 mm base blade for added control and precise removal of
material
Adjustable planning depth
Combined parallel and bevel fence guide
4 fence attachment points
Magnesium alloy construction

3 blade barrel for efficient removal of wood
10 position depth control
Ergonomic soft-grip main handle
Live tool indicator when plugged into the power supply
Dust extraction adapter with dust bag or suitable vacuum
cleaner
PF110/2000S
Input power
W
2000
Planing depth
mm
0 – 3.5
Planing width
mm
110
Input power
W
1500
Rebating depth
mm
16
No-load speed of cutter drum
min-1
15000
No-load Speed of cutter drum
min-1
15000
Planing depth
mm
0-3,0
Yes
Planing width
mm
180
Motor electronic protection
Yes
Rebating depth
mm
16
Soft start
Yes
Weight
kg
8.50
7.30
Item No..
Weight
Item No..
Standart equipment
www.felisatti.es
kg
135720270
Dust suction adapter, hexagonal key, lateral stop, depth end-stop
TECHNICAL DATA
Standart equipment
PF180/1500
135720770
Combined parallel and bevel fence guide, Blade spanner, Replacement
drive belt, Dust extraction adapter
74 | 75
Routers
RF30/430
R400
Professional edging and hinge router is mainly used for recessing door hinges and lock faceplates. The device is provided with plastic guide
which allows routing operation avoiding scratches after final finishing of the surface.
SPECIAL FEATURES
Convenient design allows the tool to be operated with one
hand
Specially designed lift for precise adjustment of the plunge
depth to the thickness of the door hinge
Compact size and small weight
TECHNICAL DATA
ROUTERS
www.felisatti.es
Routers
77
Router Bits
84
RF30/430
R400
Input power
W
430
430
No load speed
rpm
26000
24000
Collet size
mm
6
6
Debth of cut
mm
30
30
Cross slide shift
mm
28
28
Weight (without accessories)
kg
1.60
1.70
136000270
136600170
Item No.
Standart equipment
www.felisatti.es
Adapter f or connection of dust removal system which enhances
convenience and safety
Locking of spindle for quick and easy replacement of router bits
1 hard metal milling cutter 14 mm, 1 adjustable cross slide, 1 fixed spanner 17 mm
76 | 77
Routers
Routers
R16/750
RF30/750A
RF55/1000E
R16/750 Trimming router quickly and easily cut holes and slots of any shape in wood, gypsum board or composite sheets. It cuts in any
direction with the same speed. Application of additional tooling such as various bases, parallel guides and tracing appliances allow the use
of this tool as a universal light vertical router.
RF30/750A Reliable base with the adjustable bearing surface angle permits processing of inner edges and cutting holes on a perpendicular surface. High speed cutters makes it possible to obtain high quality edges.
Professional lightweight multifunctional router for routing wood and plastic. Ideal for debburing edges, cutting out knots, copy routing and
trimming.
SPECIAL FEATURES
Wide choice of replaceable bases each converting the universal
router into a device with expanded capabilities
Spindle lock for simple replacement of router bits
Electronic speed control ensuring high quality of processing and
TECHNICAL DATA
Beveled position allows the
trimming operation on the
concave radiuses in joints
Fast depth adjustment with 3
pre-adjusted positions
Easy regulation of the depth of
the guiding rail with micrometric
adjustments
Easy collet change button,
which is blocking the armature
from spining
R16/750
RF30/750A
RF55/1000E
Input power
W
750
750
1000
Cutting depth
mm
17
30
55
Chuck diameter
mm
8
8 / 3.175
8
Mill rotation speed
min-1
27000
27,000
20 000 – 27 000
Weight
kg
1.90
1.90
3.10
136040370
136040270
136050170
Item No.
Standart equipment
www.felisatti.es
avoiding burns
Light and comfortable design for prolonged operation
Convenient adapter for connection to dust removal system
Accessible Lever for blocking the routing depth
Clip, d 8 mm, fixed spanner 13 mm, fixed spanner 17 mm , cutting base, copying base, guide bushing 10
mm, guide bushing 12 mm (R16/750)
Collet d 1/8” (3.175 mm), collet d 8 mm, fixed spanner 13 mm, fixed spanner 17 mm (R30/750A)
78 | 79
Routers
Accessories
Special accessories for multipurpose routers
RF62/1500 VE, RF62/2200 VE, RF67/2200 VE
Pic.
d
Guide Bush Adaptor
6,3
Function
7
Special accessories for multipurpose routers d=43
Pic.
Name
Dust extraction
adapter
8,7
Function
For dust extraction of the
working area
10
10,3
12
Guided copying
cutting with router.
RF62/1500VE
Inclination base For milling of edges
13,5
16
Edging and
hinge base
30
Name
Pic
Function
Universal
For routing, trimming and
spindle support grooving on board materibase
als
Lock nut
Lock nut
Adapting ring
Rototool base
Guide fixing
Lock nut for collets
Collets fixing
Reduction
Fixing 1/2”router
bit in 1/4” collets
Reduction
Fixing 6 mm
router bit in 12
mm collets
Reduction
Fixing 8 mm
router bit in 12
mm collets
Collets 1/2"
Collets 1/4"
Collets 8 мм
Fixing router bit
in router
Collets 12 мм
Plastic protection screen
User’s protection
in operation with
router
For milling and cutting
operation on thin metal
plates, plywood or gypsum
boards
Copying guide
with bearing
For pattern guided cutting
with router (copying cutting)
Guiding device
for pattern cutting
For pattern guided cutting
with router (copying cutting)
Parallel guide
Parallel guided operations
with router
RF62/1500VE
R346
Professional universal router. The supply kit includes two bases – plunging and fixed ones. Fixed base is used for copy routing operations, as
well as for installation under a table.
SPECIAL FEATURES
Constant electronics automatically maintains cutter speed under
specified load
Two bases allowing for quick changing from edging operations
to plunge routing
Adjustable fixed base significantly enhances convenience of
operation when router is installed in table
TECHNICAL DATA
Collets 6mm
with lock nut
Fixing 6mm router bit
Collets 8mm
with lock nut
Fixing 8mm router bit
Electronic speed control allows the selection of optimum
routing speed to ensure high quality cuts and avoid burns
Smooth start prevents accidental kick of the router
Additional adjustable depth handle used during operation of
the router attached under a table.
RF62/1500VE
R346
Input power
W
1500
1800
Cutting depth
mm
62
75
Collet diameter size
mm
8 / 12
8/12
No-load rotation speed
min
12000 – 23000
24000
Weight
kg
2.45
5.10
136060170
136090170
Item No.
Standart equipment
www.felisatti.es
st
art
27
soft
16,7
For precise cutting especially of edges and corners
with router where universal
spindle support base is not
applicable
-1
Collet d 8 mm, collet d 12 mm, nut wrench 22 mm, key for adjustment of routing depth in case of
application with mounting of router under the table, adapter for connection to dust removal system.
80 | 81
Routers
soft
soft
RF67/2200VE
st
art
RF62/2200VE
st
art
Routers
Powerful 2200W professional router for routing process of wood and plastic. High precision and stability. Ideal for debburing edges, cutting
knots, dovetail assemblies, copy routing and shaping.
Powerful professional universal router with the deepest plunge of 67 mm. The device efficiently tackles all the tasks of universal router.
Completely adaptable for installation on a router table.
SPECIAL FEATURES
SPECIAL FEATURES
Precise fine adjustment of the routing depth in 1/10-mm steps
Constant electronics automatically maintains cutter speed
under pre-selected load
Soft Start
TECHNICAL DATA

Aluminium alloy gearbox and base
Fine depth adjustment
Adjustable paralel guide
Ergonomic soft grip handles
RF 62/2200VE
Precise fine adjustment of the routing depth in 1/10-mm steps
Automatic spindle lock for easy router bit replacement
Constant electronics automatically maintains cutter speed
under pre-selected load
Smooth start
TECHNICAL DATA
Electronic speed adjustment allowing the selection of optimum
speed
Dust removal system enhances convenience and ensures
comfortable working conditions
RF 67/2200VE
Input power
W
2200
Input power
W
2200
Cutting depth
mm
62
Cutting depth
mm
67
Collet size
mm
8 / 12
Collet size
mm
8 / 12
min
11800 – 21000
min
12000 – 21000
Weight
kg
6.00
Weight
kg
6.00
Item No.
Standart equipment
www.felisatti.es
-1
136030170
Side stop, clip d 1/2”, d 1/4”, fixed spanner, 22 mm ,7 mm, transparent guard, dust suction adapter, copier bushing
Item No.
Standart equipment
-1
136080170
Side stop, clip d 1/2”, d 1/4”, fixed spanner, 22 mm, 7 mm, transparent guard, dust suction adapter, copier bushing.
82 | 83
Router bits
Router bits
HINGE RECESSER STRAIGHT BITS
COVE bit
For routers RF30/430 and R400
Cat. Nr.
Diameter
(D)
Total length
(H)
Shank diameter (d)
933330201
12
12
6
933340201
13
12
6
933350201
14
12
6
933360201
15
12
6
933370201
16
12
6
933410201
17
12
6
933380201
18
12
6
933420201
19
12
6
933390201
20
12
6
933430201
21
12
933400201
22
12
Set of 12 bits
D = 10...22 mm
933320270
12
d
H
Cat. Nr.
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933930111
10
30
16
8
933930112
12
35
18
8
933930113
16
42
20
8
933930109
5
22
10
8
933930110
6
25
11
8
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
6
933810193
5
22
10
8
6
933810194
6
25
11
8
933810195
8
28
12
8
933810196
16
42
20
8
d
Cat. Nr.
Diameter
(D)
Length of cutter
(H)
Shank diameter
(d)
933510197
3
12
8
933510198
5
12
8
933510199
6
12
8
round Beading bit
H
D
STRAIGHT BITS
Cat. Nr.
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933800115
1
12
3
8
933800116
1.5
14
4
8
933800119
8
28
12
8
9333800120
12
35
18
8
933800123
18
50
25
8
D
933800124
20
53
25
12
d
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
30
12
8
Length of cutter
(H)
Shank diameter
(d)
6
18
8
933510201
8
25
8
933510202
12
25
8
Clasical Roman Ogee Bit
933510203
14
25
8
Cat. Nr.
933510204
16
30
8
933510205
18
30
8
933510206
20
30
8
933510207
22
30
8
933510200
H
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
7
55
8
933870110
10
10
8
933870111
12
12
8
933870112
16
16
8
933870113
25
25
8
933810211
H
d
45° chamfer bit
d
Cat. Nr.
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933700625
25
10
8
933700630
30
12
8
933700640
40
18
8
H
D
d
D
Arch type router bit
Cat. Nr.
Total length
of cutter
(H)
Width of
grooving cutter
(h)
Length of
cutter
(L)
Diameter of the
shank
(d)
933810205
20
12
6
8
933810206
www.felisatti.es
4
R
R
D
H
Tongue and Groove set FD108
933650101
R
H
R
D
Dovetail bit
933870109
d
d
Cat. Nr.
Diameter
(D)
Cat. Nr.
H
R
D
STRAIGHT BITS
Cat. Nr.
D
d
R
6
H
R
Roundover bit
Cat. Nr.
D
d
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
8
38
16
8
10
42
18
8
H
R
D
84 | 85
Router bits
Router bits
“T” type bit with bearing
Core box bit
Cat. Nr.
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
Lenght of shank
(h)
933860136
33
2
8
50
933860137
33
2.5
8
50
933860138
33
3
8
50
933860139
33
4
8
50
933860140
33
5
8
933860141
33
6
933860142
33
Cat. Nr.
Length of cutter
(H)
Diam of shank
(d)
10
7
8
933750116
d
933750117
12
9
8
933750118
16
11
8
933750119
18
12
8
50
933750120
22
14
8
8
50
933750121
25
16
8
8
8
50
933750122
30
20
8
933750123
35
22
8
933860143
33
10
8
50
933860144
33
12
8
35
933860145
33
16
8
35
h
H
D
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933540101
5
10
9
8
933540102
8
16
15
8
933540103
10
20
19
8
933540104
12
24
22
8
15
30
27
8
Diam of shank
(d)
933860109
33
2
8
933860110
33
3
8
933860111
33
4
8
933540105
933860112
33
5
8
Half round side cutter bit
933860113
33
6
8
933860114
33
8
8
933860115
33
10
8
933860116
33
12
933860117
33
16
d
Cat. Nr.
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933800145
10
35
20
8
8
933800146
12
40
22
8
8
933800147
14
48
28
12
933800148
16
52
32
12
H
D
Beading flush trim bit
D
H
R
d
H
D
d
Arch type router bit
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933810151
6
18
8
933810152
10
12
8
933810153
10
25
8
933810154
12
25
8
933810155
12
30
8
933810158
12
40
8
933810156
14
30
8
933810159
14
40
8
933810157
16
30
8
933810160
16
40
8
d
H
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933810183
19
30
8
933810184
19
40
8
Cat. Nr.
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933750150
3
20
6
8
933750151
5
24
10
8
933750152
8
30
16
8
933750153
12
38
24
8
d
Cat. Nr.
R
Diam. of cutter
(D)
Length of cutter
(H)
Diam of shank
(d)
933630101
4
16
10
8
933630102
6
18
12
8
933630103
8
25
16
8
933630104
10
30
18
8
933630105
12
32
22
8
H
R
d
Open end carving bit
D
Beading flush trim bit
H
R
D
d
“V”type grooving bit
H
D
www.felisatti.es
H
D
Cat. Nr.
Length of cutter
(H)
Cat. Nr.
D
d
Diam. of cutter
(D)
Cat. Nr.
d
Round carving bit
“T” type slotting cutter
Cat. Nr.
Diam. of cutter
(D)
Cat. Nr.
Diameter
(D)
Cutting length
(H)
Shank diameter
(d)
933830124
12
12
8
933830125
16
16
8
H
D
86 | 87
Doweler
RF12/710
Professional doweler designed for making high precision pair holes for dowels with center-to-center distance of 32 mm in joining operations.
Fast and accurate edge-to-edge and mitre corner joints.
SPECIAL FEATURES

Powerful 710 W motor allows to work with any wood hardness
Adjustable depth guide
Used for all types of joints from 3 - 12 mm
Locking of spindle for quick and easy replacement of the bit
Adapter for connection to dust removal system
TECHNICAL DATA
DOWELER and
biscuit joiners
www.felisatti.es
www.felisatti.es
Light weight and comfortable ergonomic design
Stop system for fast and precise positioning. Retractable stop
pins and auxiliary stops facilitate drilling near the edge - without
the need for marking.
RF 12/710
Input power
W
710
Rotation speed
min-1
18500
Collet size
mm
8
Adjustable mill angle
°
0 - 90
Doweler
89
Maximum hole depth
mm
43
Biscuit Joiners
90
Distance between centers of mills
mm
32
Drilling depth
mm
0 - 37
Minimum/maximum diameter of mils
mm
5 /12
Weight
kg
3.60
Item No.
Standart equipment
136260170
Screwdriver (hexagon S2, 5mm), set of 6mm and 8mm drill and dowels, oiler,
template marker, pin installation, dust extraction adapter, carry case
88 | 89
Mitre
Saws
Biscuit
Joiners
Mitre
Biscuit
SawsJoiners
RF100/710
RF100/710E
Professional biscuit (flat-dowel) joiner. Simple and precise. It makes slots for joints at precisely 90° to the surface of the workpiece. The device is
also used to remove wood defects (pitch pockets) and making long slots.
Professional biscuit (flat-dowel) joiner. Simple and precise. It makes slots for joints and mitred joints at set angles of 0°, 45° and 90° to the
surface of the workpiece. The device is also used to remove wood defects (pitch pockets) and making long slots.
SPECIAL FEATURES
SPECIAL FEATURES
Groove height adjustment via revolving depth control turret
Locking of spindle for quick and easy replacement of mills
Standard package includes high quality mill with M-shaped
cutting tooth
Side adapter for connection to the dust removal system
Light weight and ergonomic design
Scale for precise adjusting of the hight of slot cutting according
to the thickness of the material

Robust metal angle guides
Groove height adjustment via revolving depth control turret
Adjustable anlge for mitre cuts of slots
Locking of spindle for quick and easy replacement of mills
TECHNICAL DATA
Spindle lock button for easy
replacement of cutting mill
Adjustable depth control
turret for pre-selection of slot
cutting hight
Adapter for dust removal
systems
Scale for precise adjusting
of the hight of slot cutting
according to the thickness of the
material
RF100/710
RF 100/710E
710
Input power
W
710
No-load speed
rpm
9000
9000
Saw blade diameter
mm
100
100
Saw blade inner hole diameter
mm
22
22
Saw blade thickness
mm
4
4
Working shaft thread
mm
M10x1.5
M10x1.5
Set width
mm
3.5
3.5
Maximum milling depth
mm
20
20
Approx. weight (without accessories)
kg.
2.80
2.80
Working possibility from 0 ° to 90 °
-
■
Item No.
136230170
Standart equipment
www.felisatti.es
Standard package includes high quality mill with M-shaped
cutting tooth
Side adapter for connection to the dust removal system
Light weight and ergonomic design
136270170
Cutting disc, set of biscuit dowels, carry case
90 | 91
Combination Mitre Saws With Commutator Motor
MTF216/1100T
MTF250/1500T
As inventor of the first in the world miter saws with rotating table and beveled cutting, FELISATTI offers its range of highly precise, portable
professional miter saws designed for workshops and on-site operations.
SPECIAL FEATURES
The most compact miter compound saw (9,50)
Double dust removal system through channels inside the table
and protective casing of the sawing blade
TECHNICAL DATA
MITRE SAWS
www.felisatti.es
Combination Mitre Saw with
commutator motor
Combination Mitre Saw with
induction motor
Gauge Mitre Saw
Sliding Mitre Saw
Mitre Saw Blades
MTF216/1100T
MTF250/1500T
1100
1500
Input power
W
No-load speed
min
5000
4300
Cut at 90º/mitre
mm
58 x 133
70 x 150
Cut at 45º/mitre
mm
58 x 90
70 x 85
Cut at 90º/blade at 45º
mm
35 x 133
47 x 150
93
Cut on upper bench
mm
31.50
45
Upper bench dimensions
mm
224 х 358
264 х 385
94
96
97
98
Blade diameter
mm
216
250
Blade hole diameter
mm
20 (30)
20 (30)
Weight
kg
9.50
11.00
Overall dimensions (LxHxW)
mm
427x277x531
460х450х300
135470170
135470370
Item No.
Standart equipment
www.felisatti.es
High precision of the saw rotating mechanism
Excellent series of cuts attained through a rigid structure and
the large coupling area of the rotating mechanism.
-1
Saw disk, hex key set, spanner, guide rail; plastic pusher
92 | 93
Combination Mitre Saws With Induction Motor
Combination Mitre Saws With Induction Motor
90º
90º
45º
90º
90º
45º
45º
45º
90º
90º
73
150
45º
73
90
90º
90º
45º
46
150
45º
45º
45
48
40
NTF250/1200ST
102
150
97
102
66
150
45
53
66
NTF305/1600ST
SPECIAL FEATURES
FELISATTI’s range of precise, professional miter saws with induction motor. These Compound miter saws provide optimum ratio of power,
precision and weight.
SPECIAL FEATURES
TECHNICAL DATA
Induction motor reduces noise and vibration providing smooth
operation at all times
Adjustable upper table height allows making both through and
blind cuts
Electric motor brake provides guaranteed stopping of the blade
Induction motor reduces noise
and vibration providing smooth
www.felisatti.es
Induction motor reduces noise and vibration providing smooth
305 mm disc allows the cut on a 100x150 mm timber
Adjustable upper table height allows making both through and
blind cuts
Accuracy of cutting angle
and repeatability of cut is
ensured by original design and
high precision of machining of
rotating mechanism
ensuring operator’s safety
Protective cover design of the disc on the upper table allows
observing the entry point of the blade ensuring high precision
of cuts.
Ergonomic handle with easy
control of the On/Off Switch
Stable base and rotating table
with engraved measurements
Electric motor brake provides guaranteed stopping of the blade
ensuring operator’s safety
Convenient blade guard
NTF250/1200ST
NTF305/1600ST
Input power
W
1200
1600
Voltage
V
230V
230V
Frequency
Hz
50
50
No-load speed
min
4500
4000
-1
Cut at 90°/crop
mm
73 x 150
102 x 150
Cut at 45°/crop
mm
73 x 90
97 x 102
Cut at 45°/blade at 45°
mm
46 x 150
66 x 150
Cut at 45°/blade at 45°
mm
45 x 48
45 x 53
Cut on upper table
mm
40
66
Upper table dimensions
mm
473 x 312
473 x 312
Blade diameter
mm
250
305
Blade hole diameter
mm
30
30
Weight
kg
22.00
25.00
Overall dimensions (LxHxW)
mm
520 x 396 x 650
573 x 432 x 667
135470270
135470570
Item No.
Standart equipment
Adjusting rod: required for the cutting of beams of the same length, pusher for the
working of small parts on the upper table, blister pack of Allen wrenches.
94 | 95
Gauge Miter Saw
Sliding Miter Saw
90º
90º
90º
90º
66
141
102
310
45º
102
222
90º
45º
90º
90º
45º
45º
45º
66
88
90º
45º
60
310
39
141
90º
45º
45
310
39
88
Innovative Angle Transfer System
45º
45º
60
222
SRF305/1800
SRF305/1800E
SPECIAL FEATURES
S254/1800
Easy and simple way to make corner joints trough special bevel gauge. Gauge miter saw FELISATTI simplifies the procedure to
a simple operation MEASURE - SET - CUT which reduces error probability to zero. This unique, time saving angle finder system
measures wall angles for inside or outside corners and transfers them on the sawing table.
TECHNICAL DATA
W
No-load speed
min
Sawing blade diameter
mm
-1
SRF305/1800
SRF305/1800E
1800
1900
230 V
230V
4200
2000 - 4000
W
Voltage
V
No load speed
min
Turn table size Ø
mm
Ø342
Ø342
Blade
mm / Tpcs
Ø305 x 30 / 60T
Ø305 x 30 / 80T
min
4500
4500
Mitre stops
°
Left - 0° ,15°, 22.5°, 31.6°, 45°
Right - 0°, 15°, 22.5°, 31.6°, 45°, 60°
1800
Mitre angle range
°
45° left & 60° right
45° left & 60° right
4800
Bevel angle range
°
0° to 45°
0° to 45°
Mitre cut at 60°
mm
102 x158
102 x158
The design is adapted for both right-hand and left-hand
operation
S254/1800
Input power
TECHNICAL DATA
Adjustable upfront support brackets provide extra support for big
workpieces
Upfront Bevel Lock system for easy and safe operation
Integrated laser for precise sawing
Speed preselection (SRF305/1800E)
Input power
SPECIAL FEATURES
High precision table with stops and locks
Powerful motor that enables easy cuts on the hardest wood
High quality blade supplied as a standard equipment
Dual bevel function allows user to flip the saw instead the material
for increased productivity
The model is provided with belt driven motor which is one of the
best designs ensuring control and smoothness of stroke
Special stop allows making blind cuts for slots with controllable
depth
254 /30
Angle adjustment range
Blade highest speed
-1
-1
Maximum capacity
for mitering
°
± 45°
Compound cut at 60° (R)
mm
45 × 158
45 × 158
Oblique cutting angle adjustment range
°
0-45°
Dimension
mm
990 × 670 × 750
990 × 670 × 750
Weight
kg
14.00
Weight according EPTA-Procedure 01/2003, kg
kg
34.00
33.00
135470870
Item No.
135470670
135470770
Item No.
Standart equipment
www.felisatti.es
Saw disk, hex key set, spanner, guide rail; plastic pusher, corner measuring set
Standart equipment
Saw disk, hex key set, spanner, guide rail; plastic pusher
96 | 97
Mitre Saws Blades
Mitre saws blades for ALUMINIUM
Cat. Nr.
Diameter
mm
Bore hole
mm
Kerf Thickness
mm
Number of theet
934650470
216
30
2.2
60 T
934960270
250
30
2.6
60 T
934750570
305
30
3.0
72 T
Mitre saws blades for FRAME
Cat. Nr.
Diameter
mm
Bore hole
mm
Kerf Thickness
mm
Number of theet
934960470
250
30
2.6
80 T
Mitre saws blades for WOOD
Cat. Nr.
Diameter
mm
Bore hole
mm
Kerf Thickness
mm
Number of theet
934650370
216
30
2.2
24 T
934960170
250
30
2.6
24 T
934760470
250
30
2.6
40 T
934960370
250
30
2.6
60 T
934750470
305
30
3.0
72 T
934960670
250
30
2.6
60 T
Mitre saws blades for PVC
Cat. Nr.
Diameter
mm
Bore hole
mm
Kerf Thickness
mm
Number of theet
934960670
250
30
2.6
60 T
vacuum cleaners
www.felisatti.es
www.felisatti.es
98 | 99
Vacuum Cleaners
Vacuum Cleaners
VСF32/1200
VСF45/1400
AS20/1200
Industrial vacuum cleaners for universal use in industry, in the workshop and on the construction site. Used for vacuuming dust directly from
the power tool during drilling, milling, sanding, grinding and sawing operations. Equipped with a special coating filter that reduces the waste
sticking to the filter by 40%.
Industrial vacuum cleaners for universal use in industry, in the workshop and on the construction site. Used for vacuuming dust directly from
the power tool during drilling, milling, sanding, grinding and sawing operations. Equipped with a special coating filter that reduces the waste
sticking to the filter by 40%.
SPECIAL FEATURES
SPECIAL FEATURES
Supplied with power socket for powered tools connection
Automatic self-cleaning electromagnetic filter activated upon
restart of the vacuum cleaner
Two operating speeds + forced cleaning.

Soft start
Water level indicator (a float with a switch)
Fast cooling motor system
Antistatic body.
Supplied with power socket for powered tools connection
Two operating speeds + forced cleaning.
TECHNICAL DATA
TECHNICAL DATA
AS20/1200

Soft start
Water level indicator (a float with a switch)
Fast cooling motor system
Antistatic body.
VCF32/1200
VCF45/1400
Input power
W
1200
1400
Input power
W
1000
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Rated voltage
V~Hz
230 ~ 50
Airflow capacity
l/s
61
61
Airflow capacity
l/s
70
Maximum vacuum pressure
mbar
248
248
Maximum vacuum pressure
mbar
171
Container capacity (total/dust/
water)
L
32 / 27 / 20
45 / 40 / 33
L
20
Container capacity (total/dust/
water)
Dimensions (LхWхH)
cm
39 x 45 x 62
39 x 49 x 70
Weight
kg
6.00
Weight
kg
10.00
14.00
196000470
Item No.
Standart equipment
Item No.
Standart equipment
www.felisatti.es
Main filter, filter bag, suction hose, tube handle, universal nozzle, crevice
nozzle, 2 x suction tube
196000270
196000370
Main filter, filter bag, suction hose, tube handle, universal nozzle, crevice
nozzle, 2 x suction tube
100 | 101
Vacuum Cleaners
NOTES
VС25/1400
VС50/1400
Industrial vacuum cleaners intened for hard, heavy-duty continous use in industry, in the workshop and on the construction site
Equipped with a pleated filter with a large filtering area and filter vibration cleaning system that is activated after each vacuum cleaner
start.
SPECIAL FEATURES
Powerful 1,400 W motor complete with the by-pass cooling
system and a double turbine
Soft start and starting current limitation permits the reduction
of the load on electric mains
Built-in socket for electric tool connection that starts the
vacuum cleaner automatically
TECHNICAL DATA
Water container overflow detector
Easy replacement of reusable filter
Standard equipment includes a 5 meters long hose and a
cleaning set
Intended for fluids and wet waste removal
Equipped with water drain valve placed in the container
bottom part, and a durable double walled waste container.
VC25/1400
VC50/1400
Rated power
W
1200
1200
Rated voltage
V~Hz
230 ~ 50
230 ~ 50
Airflow
l/s
61
61
Maximum underpressure
mbar
248
248
Container capacity
L
20 / 16
45 / 43
Filter surface area
cm2
4300
4300
BIA M
BIA M
12.70
17.70
196000570
196000670
Filter type
Weight
Item No.
Standart equipment
www.felisatti.es
kg
Main filter, filter bag, suction hose 5 m, tube handle, universal nozzle,
crevice nozzle, 2 x suction tube
102 | 103
INTERSKOL POWER TOOLS S.L.
FELISATTI S.A.
Carretera de Sant Joan de les Abadesses s/n
17500 RIPOLL, SPAIN
Tel: +34 972 700 200
Fax: + 34 972 700 554
e-mail: [email protected]
Rue du Cendrier, 17
Case Postale 1675
1211 GENEVA, SWITZERLAND
Tel: +41 22 716 06 31
Fax: +41 22 716 06 39
www.felisatti.es