flooring catalogue

Transcription

flooring catalogue

PARCHEM
CONSTRUCTION
SUPPLIES
THE LE A D I N G C H O ICE F OR THE F L O O RIN G CONT RACT OR
FLOORING CATALOGUE
Please recycle
© Copyright 2013 Parchem Construction Supplies Pty Limited
This publication is copyright. All rights are reserved.
Reproduction in whole or in part is prohibited without written permission.
Application details are provided as a suggestion only of intended use.
This catalogue is produced as a guide to the product range. Some items may not be available at all outlets.
Owing to a continual product improvement, designs & specifications may be subject to change without notice.
2 I Parchem Construction Supplies Pty Ltd
ABN 80 069 961 968
INDEX
Manufacturer and distributor of industry leading brands
The complete range of products and solutions for the flooring contractor....
CONTENTS
Concrete Floor Repair
4
Curing Compounds
5
Preparation
5
Surface Scarifiers
6-9
Cup Wheels
10
Drilling Equipment
11
Concrete Grinders
12-13
Grinding Shoes
14
Shot Blasters
15-16
Dust Collectors
17
Power Hammer Tools
18-20
Liquid Hardeners
21
Primers
21
Integral Hardeners
21
Exposed Aggregate Finish
21
Cementitious & Resin Underlays
21-22
Floor Toppings
22-23
Coatings
23-24
Decorative Floor Toppings
24-25
Concrete Sealers
25-26
Tools & Equipment
26-27
®
stencil
Flooring Contractors I 3
concrete floor repair
Concrete Floor Repair
Patchroc C
Emer-Seal PU25
High performance, flexible, one-component,
polyurethane joint sealant.
Uses
Floor / pavement patch repair, fast set mortar
(25-200 mm depth).
Uses
For the emergency reinstatement of localised deep patches
in concrete pavements, airport aprons, access ramps,
roadways and many industrial situations such as gangways
and warehouse floors.
Part ID
Supply (kg)
402060
20
Patchroc GP
Floor / pavement patch repair, fast set mortar
(15-75 mm depth).
Uses
For the emergency reinstatement of localised patches
in concrete pavements, airport aprons, access ramps,
roadways and many industrial situations such as gangways
and warehouse floors.
Part ID
Supply (kg)
402070
20
Paveroc
Floor / pavement large area, repair mortar
(15-50 mm depth).
Emer-Seal PU25 is used for Sealing joints in concrete
panels, fibrous cement products, external cladding panels,
blockwork and brickwork. Also in sealing joints around
aluminium and timber door and window frames and
between metal.
Part ID
Description
620525
EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN)
620530
EMER-SEAL PU 25 WHITE 600ML (20/CTN)
620535
EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN)
620545
EMER-SEAL PU 25 BLACK 600ML (20/CTN)
620550
EMER-SEAL PU 25 BRICK RED 600ML (20/CTN)
620555
EMER-SEAL PU 25 BEIGE 600ML (20/CTN)
620560
EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN)
Emer-Seal PU40
Tough, abrasion resistant, one-component,
polyurethane joint sealant, trafficable.
Uses
For bonding or sealing joints between most construction
materials, where a high bond strength is required.
Part ID
Description
620600
EMER-SEAL PU 40 CONC.GREY 600ML (20/CTN)
620601
EMER-SEAL PU 40 BLACK 600ML (20/CTN)
620606
EMER-SEAL PU 40 CONCRETE GREY 200L
Uses
Paveroc is used for the reinstatement of large areas
of concrete pavements and floors to avoid the total
replacement of bays.
Part ID
Supply (kg)
402080
20
Roadseal SL
Very low modulus, self-smoothing, one component silicone joint sealant.
Uses
Sealing sawn joints in:
Asphalt roads & pavements.
Slot sealing of cable installations in asphalt and concrete pavements.
Abutment joints between concrete and asphalt pavements.
Nitofill LV
Low viscosity, dual cartridge, epoxy crack-injection
system.
Part ID
Description
610407
EMER-SEAL ROADSEAL SL CHAR.GREY 600ML
Uses
610403
EMER-SEAL ROADSEAL SL CHARCOAL GREY 20L
Nitofill LV is designed for injecting cracks in concrete and
masonry where there is a need to consolidate a structure or
exclude water and air from contact with the reinforcement.
610406
EMER-SEAL ROADSEAL SL CHARCOAL GREY 200L
Part ID
Description
344215
NITOFILL LV 1.5L PACK
344214
NITOFILL LV 15L BASE PACK
344216
NITOFILL LV HARDENER 15L PACK
Conbextra EP10
A highly fluid epoxy grout for dynamic/repetitive load
applications gap width between 0.25-10mm.
Caulking Guns
Part ID
Description
770513
SEALANT GUN LONG BARREL (SAUSAGE)
ARW055
CAULKING GUN 380MM
DW-DC547-KIT
CAULKING GUN DEWALT CORDLESS (KIT)
Uses
Conbextra EP10 is a low viscocity epoxy grout for
situations where heavy dynamic or mobile loads are
encountered.
Part ID
Supply
223115
300ML PAK
223120
1.5L PAK
ABN 80 069 961 968
floor surface preparation
Emer-seal backing rod
Economical, low density, open cell, polyurethane,
sealant backing rod range.
uses
Time saving – its flexibility, elasticity and round shape
allows quick, efficient placement into both even and
uneven joints. It can be stretched, squeezed or bent to
conform to irregular surfaces. One size of diameter foam
can be used in a range of joint sizes.
Optimal sealant curing – open cell construction allows air
to reach both sides of the sealant, ensuring uniform curing.
Part ID
Description
665200
EMER-SEAL BACKING ROD 16MM X 150M ROLL
665201
Curing Compounds
Concure A99
Water based acrylic curing compound - conforms to
AS3799.
Uses
Concure A99 is recommended for applications to the surfaces
of freshly laid concrete, including renders, structural and mass
concrete indoors and outdoors and particularly in situations
where other conventional means of wet curing are difficult to
maintain.
Part ID
EMER-SEAL BACKING ROD 22MMX100M ROLL
665202
665203
665204
Supply (L)
900909
20
909900
205
Concure X90
Expandafoam Backing rod
Water based resin curing compound - conforms to AS3799.
Designed to degrade with UV exposure.
Medium density, closed cell polyethylene backing rod
range.
Uses
uses
Concure X90 is suitable for curing all freshly laid concrete either
smooth or textured, indoors or outdoors.
Expandafoam is a closed cell polyethylene foam rod
supplied in circular section cords of varying diameters.
Expandafoam is primarily used in expansion joints but is
also suitable for use in any joint system requiring a readily
compressible joint filler containing no migratory chemicals
which could adversely affect joint sealants.
Part ID
Description
665120
EXPANDAFOAM ROD 6MMX250M ROLL
665121
665122
665123
665124
665125
665126
665127
EXPANDAFOAM ROD 40MMX2M STRIP
665128
EXPANDAFOAM ROD 50MMX2M STRIP
Part ID
Supply (L)
900804
20
900801
205
Concure AV
Evaporative retarders for plastic concrete to reduce
shrinkage cracks.
Uses
Concure AV is recommended for spray applications onto
the fresh surface of plastic concrete to greatly reduce
cracking caused by unfavourable weather conditions.
Part ID
Supply (L)
444444
20
444445
200
EMER-SEAL CONstruction
SILICONE HM
Tough, pick and abrasion resistant, one-component
silicone sealant / adhesive for civil and industrial
applications.
Preparation
Uses
Hydrochloric Acid
For bonding or sealing joints between most construction
materials, where a high bond strength is required.
Part ID
Part ID
Description
610375
EMER-SEAL CON SILICONE HM CON.GREY
600ML
Supply (L)
AC4051
5
AC4052
20
surface scarifierssu
SURFACE SCARIFIERS
Features
Versatility - Surface grinder/scarifier with a cutting width of 200 mm (8”), ideal for concrete or asphalt surfaces. A variety of multipurpose, interchangeable tools makes surface cleaning
easy, virtually eliminating down time for changing tools.
Handling - The machine combines lightweight with compact size & high performance.
Economical - The machine gives unsurpassed value & return on your investment in time & equipment.
Adjustable - The fine pitch tool height adjustment makes the machine responsive to your needs & extends tool life.
Expandable - An optional edger cage can be fitted allowing you to work within 12 mm from any wall or protrusion. A dust control outlet is fitted to allow use with an optional dust extractor.
SP-8H
SP-8E
* Petrol SPS units come with a factory installed Cyclopac air filtration system.
MODEL
PETROL
Model
ELECTRIC
SP-8
Part No.
SP-8
SP-8E
BR-SP8R
BR-SP8H
BR-SP8H
Path
200 mm (8”)
200 mm (8”)
200 mm (8”)
Engine
Robin 6.0 hp
Honda 5.5 hp
240V 1.5kW, 8.7amp
Weight
61 kg
61 kg
68 kg
CUTTER CAGES
SURFACE SCARIFIER ACCESSORIES
‘A’ Type Cage
‘B’ Type Cage
Part Code
DESCRIPTION
Part Code
DESCRIPTION
BR-R139
Assembly Milling of misangled footpath, scrabbling of concrete surfaces and milling concrete joints.
BR-50078
Flail Cage Assembly - “A” Type
BR-50146
Friction Cage Assembly - “B” Type
BR-50017
Cutter Shaft
BR-50102
Ring Spacer
BR-50339
Hardened Washer
BR-50127
Tension Spring
BR-50147
Shackles
BR-50021
B-1 Cutter
BR-50139
B-2 Cutter
BR-50140
B-2 Cutter
BR-50125
A-1 Cutter
BR-50142
A-2 Cutter
BR-50143
A-3 Cutter
BR-50120
Tungsten Carbide Tipped Cutter
ABN 80 069 961 968
ssurface scarifiers
MULTI BLADE MACHINE
FEATURES

Dust free if connected to a convenient Blastrac dust collector.
Possibility to remove 3mm of concrete at a time (depending on type of concrete), which saves a lot of time.
Because this machine does not hit the floor, it is a perfect way to remove hard top layers from soft floors.
Sawing pattern is very fine, because of the many blades on one drum.
New: drive system equipped with a pedal. Machine can drive on power without a working drum.
Reduced the use of expensive diamond tools.
Complete sealed drum housing for reducing substance.
By using more spacers and fewer blades the sawing pattern can be changed.
Combination machine, which is easy to change from sawing machine into scarifying machine.
Comfortable to use, easy to move, low vibrations.
Several optional tools for each different application.
Drum of Diamond Blades used by BMC-335EHY
Part Code
DESCRIPTION
E06320
DIAMOND BLADE 250 GREEN 30 / 40
E06079
SPACER RING 2.5MM
MODEL
Working width
Scarifying capacity
Motor power
Working speed
Weight
BMC-335EHY
Ø 335mm
Up to 80 m²/h on concrete
12.1kW / 400V - 50Hz / 32A – Three phase
13.9kW / 400V - 60Hz / 32A – Three phase
3000 rpm
405 kg
Dimensions L / W / H
1400 mm / 605 mm / 1075 mm
Drive system / speed
Hydraulic / 1-15 m/min
Push / Pull machine
Surface
Push
Concrete / Stone / Asphalt
surface scarifierssu
BLASTRAC SCARIFIERS
Features

Closed circuit which is almost dust free, when connected to an appropriate Blastrac dust collector.
Heavy weight for increased scarifying performances.
New braking system with handle. During scarifying, the machine slows down itself. Brake force is easily changed with handle on steer.
Extra heavy drum, for more down force.
Adjustable braking device, lateral drum loading.
Micrometric and memorized adjustment of the working depth; No underground deterioration and more precision.
User friendly design, comfortable to use with low vibrations, easy to manoeuvre.
Several optional cutting tools for each different application.
MODEL
BMP-265B
BMP-265E
Ø 265 mm
Ø 265 mm
Up to 120m²/h on concrete
8,2 kW / Petrol
5,5 kW / 400 V - 50 Hz / 16A – Three phase
1500 rpm
1500 rpm
175 kg
175 kg
1260 mm / 500 mm / 1160 mm
1260 mm / 500 mm / 1160 mm
Manual / N/A
Manual / N/A
Push / Pull machine
Push
Push
Working width
Scarifying capacity
Motor power
Working speed
Weight
Surface
scarifying cutters
to suit bmp-265
Full tungsten carbide milling cutter.
Hard metal milling cutter with tungsten
Specially designed for removing coatings,
carbide plates.
epoxies, glue residues, egaline, road
Specially designed for removing coatings,
markings and thermoplastics.
epoxies, glue residues, egaline, road
Hard metal cutter with tungsten carbide tips.
Specially designed for removing concrete,
asphalt, stone or other hard materials.
Article Code
MPL60-1
MPL75
MPL272
Description
Milling cutter 12pt. - Ø22xØ55x20
Cutter 8pt. - Ø20xØ56x6 / 8,3 TC
ABN 80 069 961 968
ssurface scarifiers
BLASTRAC SCARIFIERS
Features

Heavy weight for increased scarifying performances.
New drive system equipped with a pedal. Machine can drive on power without a working drum.
When motor is on, machine is moving forward automatically, no need to push it.
Adjustable braking device, lateral drum loading.
Micrometric and memorized adjustment of the working depth: no underground deterioration.
Variable speed, forward & backward motion.
User friendly design, comfortable to use with low vibrations, easy to manoeuvre.
Several optional cutting tools for each different application.
MODEL
BMP-335EHY
BMP-335GHY
Ø 335mm
Ø 335mm
12,1kW / 400V - 50Hz / 32A – Three phase
7,5kW diesel
1000 rpm
1000 rpm
405 kg
405 kg
1400 mm / 605 mm / 1075 mm
1400 mm / 605 mm / 1075 mm
Push / Pull machine
Push
Push
Working width
Scarifying capacity
Motor power
Working speed
Weight
Surface
scarifying cutters
to suit bmp-335
Hard metal cutter with
Hard metal milling cutter with Full tungsten carbide milling Hard metal cutter with tungsten
tungsten carbide tips.
tungsten carbide ends.
cutter.
carbide tips.
Specially designed for
Due to the 12 cutting points the
removing concrete, asphalt,
removing coatings, epoxies,
removing coatings, epoxies,
threaded surface is more equal.
stone or other hard materials.
glue residues, egaline, road
glue residues, egaline, road
Specially designed for removing
concrete, asphalt, stone or
other hard materials.
Article Code
MPL24
MPL29
MPL60-1
MPL120
Description
Cutter 8pt. - Ø30xØ80x8 / 8.3 TC
Cutter 12pt. - Ø30xØ77x8 / 8.3 TC
cup wheelsd
SINGLE ROW
SPIRAL SEG
Single row diamond cup wheel suitable for grinding a wide range of construction materials
at an economical cost. Materials include concrete, bricks, concrete pavers stone, concrete
blocks etc. Should be used dry on electric power tools.
Spiral diamond cup wheels available with 9, 12 and 24 segments for aggressive grinding
to more controlled type application where extended life is desired. Should be used dry
on power tools or wet/dry if used on a walk behind floor grinder. Suitable for grinding
concrete, bricks, concrete pavers, stone, concrete blocks etc.
Part Code
Specification
ARBOR
Description
SGP-1-100T
100×8×7×8×30
22.2
CUP100SRE- TRADE
Part Code
Specification
ARBOR
Description
SGP-1-125T
125×10×7×8×30
22.2
CUP125SRE- TRADE
TSGP100-9
100×9×7×5×23
22.2/16
CUP SPIRAL-100S9
SGP-1-180T
178×14×7×8×30
22.2
CUP180SRE- TRADE
TSGP125-9
125×9×7×8×23
22.2
CUP SPIRAL-125S9
TSGP180-12
178×12×7×8×28
22.2
CUP SPIRAL-180S12
TSGP180-24
178×24×7×8×28
22.2
CUP SPIRAL-180S24
TURBO
5 - SEGMENT
Turbo diamond cup wheel with a coarse grit diamond designed for rapid removal of a wide
range of construction materials with exceptional life. Materials include concrete, bricks,
concrete pavers, stone, concrete blocks etc. Should be used dry on electric power tools.
5 - segment diamond cup wheel at an economical cost designed for aggressive grinding
of wide range of construction materials such as concrete, bricks, concrete pavers, stone,
concrete blocks etc. Also suitable for some epoxy removal. Should be used dry on power
tools or wet/dry if used on a walk behind floor grinder.
Part Code
Specification
ARBOR
Description
GJB100-GCA2-C
100×6×20
22.2/16
CUP TURBO 100C
Part Code
Specification
ARBOR
Description
GJB100-GCA2-M
100×6×20
22.2/16
CUP TURBO 100M
TSGP180-S5
178×5×7×8×28
22.2
CUP SP-SUPA 180S5
GJB100-GCA2-F
100×6×20
22.2/16
CUP TURBO 100F
R-SHAPE SEGMENT
New design “R” segment designed for rapid removal of concrete and hard painted
coatings which have been applied to concrete Should be used dry on power tools or wet/
dry if used on a walk behind floor grinder.
TURBO
Turbo diamond cup wheel with a medium grit diamond designed for removal of a wide
range of construction materials without deep scratching and giving exceptional life.
Materials include concrete, bricks, concrete pavers, stone, concrete blocks etc. Should be
used dry on electric power tools.
Part Code
Specification
ARBOR
Description
GJB125-GCA2-C
125×6×20
22.2
CUP TURBO 125C
GJB125-GCA2-M
125×6×20
22.2
CUP TURBO 125M
GJB125-GCA2-F
125×6×20
22.2
CUP TURBO 125F
Part Code
Specification
ARBOR
Description
TSGR125
125×9×7×15×36
22.2
CUP125RC R-SEGMENT
TSGR180
178×14×7×20×34
22.2
CUP180RC R-SEGMENT
PCD
Poly Crystalline diamond cup wheels specifically designed for removal of glues and
epoxies which are excessively built up on concrete surfaces. Softer type “chewy” materials
are no match for this aggressive cup wheel. Should be used dry on power tools or wet/dry
if used on a walk behind floor grinder.
TURBO
Turbo diamond cup wheel with a fine grit diamond designed for fine grinding or removing
scratches and finishing off on a wide range of construction materials and giving
exceptional life. Materials include concrete, bricks, concrete pavers, stone, concrete
blocks etc. Should be used dry on electric power tools.
Part Code
Specification
ARBOR
Description
GJB180-GCA2-C
180×6×20
22.2
CUP TURBO 180C
GJB180-GCA2-M
180×6×20
22.2
CUP TURBO 180M
GJB180-GCA2-F
180×6×20
22.2
CUP TURBO 180F
Part Code
Specification
ARBOR
Description
DRCW125-PCD
125×12×3×1.5×3
22.2
CUP PCD 125MM (12 TIP)
DRCW175-PCD
175×6×3×1.5×3
22.2
DRCW175-PCD
175×12×3×1.5×3
22.2
DRCW175-PCD
175×24×3×1.5×3
22.2
ABN 80 069 961 968
sdrilling equipment
SHROUDS FOR ANGLE GRINDERS
6mm wide tuck point
05-65903
Premium quality 6.5mm wide blade used for tuck pointing and cleaning of mortar joints.
Most commonly used by the professional in dry application.
Part Code
Specification
Description
HFTK105P-6
105×10×6.35×30×8×4.0 (85)
BLADETEC-TU105/65 PREMIUM
HFTK115P-6
115×10×6.35×30×9×4.0 (95)
HFTK125P-6
125×10×6.35×30×10×4.0 (105)
HFTK180P-6
178×10×6.35×32×14×4.0 (158)
E06227
Part Code
Specification
ARBOR
Description
E06227
POLYURETHANE
UNIVERSAL
5" FULL SHROUD
POLYURETHANE
UNIVERSAL
7" CONVERTIBLE ECO
SHROUD
05-65903 9.5mm wide tuck point
Premium quality 9.5mm wide blade used for tuck pointing and cleaning of mortar joints.
Most commonly used by the professional in dry application.
FIXING NUTS - CUP WHEELS
Part Code
Specification
Description
FX-05-91587
ARBOR NUT
ARBOR NUT (9” GRINDER)
FX-05-91588
ARBOR NUT
ARBOR NUT (5” GRINDER)
FX-05-91595
M14 THREAD
BLADE NUT
Part Code
Specification
Description
HFTK105P-9
105×10×9.5×30×8×4.0 (85)
HFTK115P-9
115×10×9.5×30×9×4.0 (95)
HFTK125P-9
125×10×9.5×30×10×4.0 (105)
HFTK180P-9
178×10×9.5×32×14×4.0 (158)
V-Segment Crack Chaser Wheels
Premium quality crack chasing blade with a “V” type segment designed to follow and
widen cracks in concrete prior to repair. Most commonly used by the professional in dry
application.
Part ID
Specification
Description
HFSTK105P
100x12x9.5x30x7x5.5 (76)
BLADETEC CRACK CHASER 105MM
HFSTK125P
125x12x9.5x32x9x4.0 (101)
HFSTK180P
178x12x9.5x34x13x4.0 (154)
grinders
FLEXTOOL CUB GRINDER
MODEL
BLASTRAC BG-250G13
FLEXTOOL CUB GRINDER
Working width
Ø250 mm
Motor
2.2 kW / 230V
Working speed
1450 rpm
Weight
46 kg
MODEL
BG-250G13
Working width
Ø250 mm
Motor
7.6 kW (10.2hp) Petrol Honda
Working speed
2000 rpm
Weight
142 kg / 50 kg disc pressure
1301 mm / 458 mm / 1106 mm
Manual / N/A
Push / Pull machine
Push
Surface
Part Code
Specification
CUB-EZPLATE-250
Description
CUB EZ CHANGE PLATE
QFSHOE-HC16
80×2×10×10×40
QFSHOE-MC16
80×2×10×10×40
QUICK FIT SHOE 16GR WHITE
QUICK FIT SHOE 16GR GREY
QFSHOE-HC20
80×2×10×10×40
QFSHOE-MC20
80×2×10×10×40
QFSHOE-ABE20
80×2×10×10×40
QUICK FIT SHOE 20GR BLACK EXTREME
QFSHOE-HC40
80×2×10×10×40
QUICK FIT SHOE 30/40GR WHITE
Part Code
Specification
Description
QFSHOE-MC40
80×2×10×10×40
QUICK FIT SHOE 30/40GR GREY
CRM-1005THC
250×5×10×10×40
GRINDING PLATE 10" WHITE 30/40GR (5-SEG)
QFSHOE-AB40
80×2×10×10×40
QUICK FIT SHOE 30/40GR BLACK
CRM-1005TMC
250×5×10×10×40
GRINDING PLATE 10" GREY 30/40GR (5-SEG)
QFSHOE-ABE40
80×2×10×10×40
QUICK FIT SHOE 30/40GR BLACK EXTREME
CRM-1005TABE
250×5×10×10×40
GRINDING PLATE 10" BLACK 30/40GR (5-SEG)
QFSHOE-MC50
80×2×10×10×40
QUICK FIT SHOE 50/60GR GREY
CRM-1005TG20
250×5×10×10×40
GRINDING PLATE 10" WHITE 20GR (5-SEG)
QFSHOE-HC80
80×2×10×10×40
CRM-1010THC
250×10×10×10×40
QFSHOE-MC80
80×2×10×10×40
CRM-1010TMC
250×10×10×10×40
QFSHOE-SHC100
80×2×10×10×40
QUICK FIT SHOE 100GR WHITE EXTREME
CRM-1010TAB
250×10×10×10×40
QFSHOE-HC100
80×2×10×10×40
CRM-1010G20
250×10×10×10×40
GRINDING PLATE 10" WHITE 20GR (10-SEG)
QFSHOE-MC100
80×2×10×10×40
CRM-1020THC
250×20×10×10×40
QFSHOE-ABE100
80×2×10×10×40
QUICK FIT SHOE 100GR BLACK
CRM-1020SHC
250×20×10×10×40
GRINDING PLATE 10" WHITE(S) 30/40GR (20-SEG)
QFSHOE-MC150
80×2×10×10×40
CRM-1020TMC
250×20×10×10×40
QFSHOE-MC300
80×2×10×10×40
CRM-1020TAB
250×20×10×10×40
QUICK FIT SHOE PCD -GLUE & RESIN
CRM-1020TFF
250×20×10×10×40
QFCUB-PCD
ABN 80 069 961 968
sgrinders
Blastrac grinders
Features

3 planetary rotating discs Ø 155 mm or Ø 185 mm or Ø 240 mm.
Separate drive system for central rotation and 3-disc planetary distribution.
User friendly and comfortable to use with low vibration.
No risk of underground deterioration.
Can work even in places with high hygiene and safety standards (food, pharmaceutical, medical industries).
Perfect for decorative floor applications.
Convenient for dry and wet applications, indoor, outdoor.
Floating shroud with brush for every application.
Many optional tools, which are easy to change because of the patented DIAMAG system.
BMG-435WD
BMG-735PRO
BMG-780PRO
BMG-580PRO
MODEL
Motor
BMG-435WD
BMG-580PRO
2,2 kW / 230V - 50Hz / 16A Single phase
7,5 kW / 400V - 50Hz / 16A –
Three phase
BMG-735PRO
BMG-780PRO
Ø700 mm
Ø750 mm
11 kW / 400V - 50Hz / 22,5A –
Three phase
15 kW / 400V - 50Hz / 29,5A –
Three phase
350 – 1100 rpm
400 – 1200 rpm
335 kg
436kg
1980 mm / 735 mm / 1180
mm
2110 mm / 780 mm / 1250
mm
Manual / N/A
Manual / N/A
Push / Pull machine
Push
Push
Concrete / Stone / Marble /
Asphalt
Asphalt
Working width
Motor
3.0 kW / 400V - 50Hz / 16A Three phase
Working speed
2,2 kW / 110V – 50Hz / 32A –
Single phase
Weight
Working speed
750 rpm
350 – 1100 rpm
Weight
115 kg
285 kg
1100 mm / 460 mm / 1350
mm
1990 mm / 595 mm / 1140
mm
Manual / N/A
Manual / N/A
Push / Pull machine
Push
Push
Asphalt
Asphalt
Application
MODEL
Application
grindING SHOES
UNIVERSAL SHOE TO SUIT BMG-435 & ALL DIAMAG
ADAPTER PLATES
easy lock grinding shoes - 1 segment
Screw type 2-segment diamond shoes to suit the Blastrac BMG-435 Planetary Grinder
available in three bonds to cover all types of concrete grinding applications. Whether it
be very hard concrete or the other end of the scale with soft abrasive concrete, shoes
are available from 16 grit through to 300 grit. Poly Crystalline Diamond (PCD) shoes also
available for removal of glues and expoxies which are excessively built up on concrete
surfaces. Softer type “chewy” materials are no match for these PCD shoes. Available bond
types: Soft, Medium, Hard. Can be used wet or dry.
2 Segment Grinding
Shoes
1 Segment Grinding
Shoes
PCD Grinding Shoe
Part Code
Specification
Description
RLSHOE-HC16/1S
EP-HEX 13X8/16X33-1SEG
EASY LOCK 1-SEG GRINDING SHOE HC16
RLSHOE-HC40/1S
RLSHOE-HC80/1S
RLSHOE-MC16/1S
EASY LOCK 1-SEG GRINDING SHOE MC16
RLSHOE-MC40/1S
RLSHOE-MC80/1S
RLSHOE-AB16/1S
EASY LOCK 1-SEG GRINDING SHOE AB16
RLSHOE-AB40/1S
RLSHOE-AB80/1S
easy lock grinding shoes - 2 segments
1 segment
Part Code
Specification
Description
BLSHOE-HC20-1S
80×1×12×12×40
BMG GRINDING SHOE WHITE 1-SEG 16GRIT
BLSHOE-HC40-1S
80×1×12×12×40
BMG GRINDING SHOE WHITE 1-SEG 40GRIT
2 segment
Part Code
Specification
Description
BLSHOE-HC16
80×2×10×10×40
BMG GRINDING SHOE 16GR WHITE
BLSHOE-MC16
80×2×10×10×40
BMG GRINDING SHOE 16GR GREY
BLSHOE-HC20
80×2×10×10×40
BLSHOE-MC20
80×2×10×10×40
BLSHOE-ABE20
80×2×10×10×40
BMG GRINDING SHOE 20GR BLACK EXTREME
BLSHOE-HC40
80×2×10×10×40
BMG GRINDING SHOE 30/40GR WHITE
BLSHOE-MC40
80×2×10×10×40
BMG GRINDING SHOE 30/40GR GREY
BLSHOE-AB40
80×2×10×10×40
BMG GRINDING SHOE 30/40GR BLACK
BLSHOE-ABE40
80×2×10×10×40
BMG GRINDING SHOE 30/40GR BLACK EXTREME
BLSHOE-MC50
80×2×10×10×40
BMG GRINDING SHOE 50/60GR GREY
BLSHOE-HC80
80×2×10×10×40
BLSHOE-MC80
80×2×10×10×40
BLSHOE-SHC100
80×2×10×10×40
BMG GRINDING SHOE 100GR WHITE EXTREME
BLSHOE-HC100
80×2×10×10×40
BLSHOE-MC100
80×2×10×10×40
BLSHOE-ABE100
80×2×10×10×40
BMG GRINDING SHOE 100GR BLACK
BLSHOE-MC150
80×2×10×10×40
BLSHOE-MC300
80×2×10×10×40
BLSHOE-PCD
80×2×10×10×40
BMG GRINDING SHOE PCD
Part Code
Specification
Description
RLSHOE-VHC16
EASY LOCK 2-SEG GRINDING SHOE VHC16
RLSHOE-VHC40
RLSHOE-VHC80
RLSHOE-HC16
RLSHOE-HC40
RLSHOE-HC80
RLSHOE-HC120
RLSHOE-MC16
RLSHOE-MC40
RLSHOE-MC80
RLSHOE-MC120
EASY LOCK 2-SEG GRINDING SHOEM120
RLSHOE-AB16
RLSHOE-AB40
RLSHOE-AB80
RLSHOE-AB120
diamag adapter plates
Model
Description
E07155
E07185
E07230/6
E07240
E07270
DIAMAG ADAPTER PLATE SUIT
BMG-435
DIAMAG 185 ADAPTER PLATE SUIT
BMG -580
DIAMAG ADAPTER PL SUIT
HTC500/650S/E&HDX
DIAMAG 240 ADAPTER PLATE SUIT
BMG-735/780
DIAMAG ADAPTER PL SUIT
HTC800/800HDX
ABN 80 069 961 968
SHOT BLASTERS
BLASTRAC 1-8DPS30
polishing resins
Features
Part Code
Specification
Description
BG7110050
DIAMAG MAGNETIC
DIAMG RESIN WET BOND 50GRIT
BG7110100
DIAMAG MAGNETIC
BG7110200
DIAMAG MAGNETIC
BG7110400
DIAMAG MAGNETIC
BG7110800
DIAMAG MAGNETIC
BG7111500
DIAMAG MAGNETIC
BG7113000
DIAMAG MAGNETIC
BG7100100
DIAMAG MAGNETIC
DIAMAG DRY RESIN PAD- GRIT 100
BG7100200
DIAMAG MAGNETIC
BG7100400
DIAMAG MAGNETIC
BG7100800
DIAMAG MAGNETIC
BG7101800
DIAMAG MAGNETIC
BG7103000
DIAMAG MAGNETIC
Closed circuit which is dust free, when connected to an appropriate Blastrac dust
collector.
Universal unit: can be connected to a standard electrical plug (230 V).
First model of the range with an electric drive system.
Ergonomic design and user friendly control panel.
Heavy duty professional equipment available either in 230 V (easy to plug in on every job
site) or 400V.
Reliable machine, suitable for rental.
The smallest operator walk-behind shot blaster.
Easy to transport, handle and use.
Can be used for floor preparation / renovation / maintenance and decorative purposes.
BLASTRAC 1-5HH
BLASTRAC 1-10DS/GLOBAL
Features
Features

Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector.
Universal unit: can be connected to a standard electrical plug (230V).
Small and compact, but still very efficient.
Can work on very small or hardly accessible areas for example edges.
Reliable machine, suitable for rental.
Can be used for floor and wall preparation / renovation / maintenance and decorative
purposes.
MODEL
1-5HH
Working width
125mm
Blasting capacity
Motor:
Up to 12m²/h on concrete
1,4kW / 230V - 50Hz / 16A - Single phase
Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector.
Highly versatile machine, appropriate for many job site sizes.
High quality and strong fabrication.
Reliable machine provided with latest technology.
MODEL
Working width
Blasting capacity
Motor
1,4kW / 110V - 5oHz / 16A - Single phase
Working speed
Weight
203 mm
254 mm
up to 50 m²/h on concrete
3,0 kW / 230V - 50Hz or 60Hz
/ 16A - Single phase
11 kW / 400V - 50Hz or 60Hz
/ 32A - Three phase – 5 pole
125 kg
325 kg
1310 mm / 400 mm / 1200
mm
1880 mm / 400 mm / 1060
mm
Push
Electric / 0 – 23 m/min
Electric / 0.5 – 25 m/min
N/A
Push / Pull machine
Push
Pull
480mm / 195mm / 350mm
Manual / N/A
Push / Pull machine
Abrasive consumption
Surface
1-10DS/GLOBAL
3,0 kW / 400V - 50Hz or 60Hz
0,2 – 1,3 m/min
9.5 kg
1-8DPS30
Steel / Concrete / Stone / Asphalt
Weight
Surface
10 – 75 gr/m²
10 – 75 gr/m²
Steel / Concrete / Stone /
Asphalt
Asphalt
SHOT BLASTERS
BLASTRAC 1-15DS/GLOBAL
DUST COLLECTORS
Features
collector.
Highly versatile machine, appropriate for medium to big job site sizes.
High quality and strong fabrication.
Height adjusting system for easy transport.
Reliable machine due to proven concept.
Easy handle and use.
MODEL
Dimensions W / L / H
Weight
Motor power
Dust extraction motors
Filter
Cleaning
BLASTRAC 2-20DT
Features
MODEL
ACCESSORIES
CF722029
Mobile nozzle 400 mm D50
CF722122
Chromed handgrip D=50mm
CF722147
Mobile nozzle 500mm D50
Motor
15 kW / 400V - 50Hz or 60Hz
2 x 11 kW / 400V - 50Hz or
60Hz / 63A - Three phase – 5
pole
Weight
450 kg
575 kg
1880 mm / 570 mm / 1200
mm
1950 mm / 720 mm / 1400
mm
Surface
Pull
Asphalt
Asphalt
DESCRIPTION
Reducer 70 - 50 mm
10 – 80 gr/m²
Handheld / small grinders, shot blasters and scarifiers.
CF722001
Pull
Manual shaker on top
Hose fitting 70mm.
550 mm
10 – 75 gr/m²
M-class star filter
CF721001
380 mm
2 independent motors
40 litres
MODEL
Push / Pull machine
1,6kW / 230 V / 50Hz & 60Hz / 16A
Ø 51 mm
2-20DT
Blasting capacity
40 kg
Dust hose inlet
1-15DS/GLOBAL
Working width
640 x 570 x 1.000 mm
Dustbin capacity
Suitable machines
collector.
Highly versatile machine, appropriate for medium to big job site sizes.
Very good performing and separation system.
Powerful machine equipped with 2 twin motors 11 kW.
Height adjusting system for easy transport.
Very efficient on all types of floors.
High performances and still fit to a standard door entrance.
Increased productivity, reduced maintenance costs.
Easy handle and use.
BDC-1216
Weight
BDC-454
665 x 1344 x 1428 mm
267 kg
Motor power
5,5kW / 400 V / 50Hz / 32A
Optional motor power
5,5kW / 440 V / 60Hz / 32A
1 powerful motor
Filter
Airflow
4 high quality cartridge filters
15000 l/min
Cleaning
Automatic pulse cleaning system
Dust hose inlet
Ø 76mm / Ø 102mm / Ø 127mm
Bag capacity
Optional Big Bag system
Optional dustbin
ABN 80 069 961 968
25kg
67,5kg
100 liters
DUST COLLECTORS
MODEL
BDC-1330LPP
BDC-3140LPP
600 x 980 x 1.780 mm
600 x 1.200 x 1.600 mm
127 kg
200 kg
Motor power
4,5kW / 230 V / 50Hz / 16A
4kW / 400 V / 50Hz / 16A
4,5kW / 230 V / 60Hz / 16A
4kW / 440 V / 60Hz / 16A
3 independent motors
1 powerful motor
Weight
Airflow
Filter
Cleaning
Dust hose inlet
Bag capacity
Optional dustbin
7500 l/min
3 cartridge filters
3 cartridge filters
7500 l/min
Automatic pulse cleaning
system
system
Ø 51 mm / Ø 76 mm
Ø 51mm / Ø 76mm
25 kg
25kg
100 litres
100 liters
MODEL
BDC-654
BDC-655
1.410 / 1.560 mm
800 x 1.730 x 1.350 mm
365kg
650kg
Motor power
4,0kW / 400 V / 50Hz / 32A
& 63A
5,5kW / 400 V / 50Hz / 32A
& 63A
4,0kW / 440 V / 60Hz / 32A
& 63A
5,5kW / 440 V / 60Hz / 32A
& 63A
1 powerful motor
1 powerful motor
15333 l/min
20833 l/min
Cleaning
system
system
Dust hose inlet
Ø 51mm / Ø 127mm / Ø
152mm
Ø 127mm or Ø 152mm
87,5 litres
100 liters
Weight
Filter
Airflow
Dustbin Capacity
filters for blastrac DUST COLLECTORs
MODEL
description
817767
STAR FILTER FOR BDC-1216
817787
490803-1
E10218
DUST COLLECTOR accessories
Hose fitting
Reducer
STAR FILTER FOR BDC-1324
Nozzle
CARTIRDGE FILTER FOR BDC-654/317P/1330LPP/3140P/3140LPP
CARTIRDGE FILTER FOR BDC-454/655
Handgrip
ACCESSORIES
DESCRIPTION
CF721001
Hose fitting 70mm.
CF722001
Reducer 70 - 50 mm
CF722122
Chromed handgrip D=50mm
CF722029
Mobile nozzle 400 mm D50
CF722147
Mobile nozzle 500mm D50
power hammer tools
cordless rotary hammer drill
HT-DH36DAL
HT-DH18DL(HL)
36V Rotary Hammer
18V Rotary Hammer
Model
Tool Code
Battery Type
Speed No Load (rpm)
Impact Rate (bpm)
Weight (kg)
HD18DL(HL)
SDS Plus
Cassette
0-750
0-3,100
2.3
DH36DAL
SDS Plus
Slide
0-550
0-2,250
4.0
rotary hammer drill
HT-DH40MR
HT-DH40MRY
HT-DH50MRY
40 mm Hammer Drill SDS max
40 mm Rotary Hammer Drill
50 mm Rotary Hammer Drill
Model
Tool Code
Watts Input
Blow Energy (joules)
Speed No Load (rpm)
Impact Rate (bpm)
Weight (kg)
DH40MR
SDS Max
950
10
240-480
1,320-2,650
6.5
DH40MRY
SDS Max
950
10.5
240-480
1,320-2,650
6.8
DH50MRY
SDS Max
1,400
20
120-260
1,050-2,150
10.5
demolition hammer
HT-65SB2
HT-H45MRY(H1)
HT-H90SB
Demolition Non-Rotary Hammer
Model
Tool Code
Watts Input
Blow Energy (joules)
Impact Rate (bpm)
Weight (kg)
H45MRY (H1)
SDS Max
950
12.7
3,000
5.9
H65SB2
30mm Hex
1,400
42.0
1,400
16.5
H90SB
28mm Hex
1,650
55.0
850
32.0
additional power tools
HT-DV18DL(HL)
HT-G13SR3-BP
18V Cordless Drill
730W 5” Grinder
ABN 80 069 961 968
HT-G18DL(H4)
18V Cordless Grinder
power hammer tools
Suitable for: Hitachi, Kango, Makita, Ryobi 21mm Hex
Part No.
Moil Point
Length mm
450
25
K09907
Flat Chisel
450
Part No.
Description
Length mm
Pack Qty
SP-MP4X18
Moil Point
540
5
SP-NC4X18
Flat Chisel
540
5
Pack Qty
5
33
K09962
Description
To Suit Medium Pneumatic - 22mm Hex
5
To Suit Medium Pneumatic - 28mm Hex
17.2
K09923
Clay Spade
FCT Shank
To suit floor
cleaing tool.
300
5
500
5
400
5
110
125
K09606
Wide Scaling
Chisel
Type of Working End
Part No.
Description
Length mm
Pack Qty
SP-MP2X18
Moil Point
610
5
SP-NC2X18
Flat Chisel
610
5
SP-AC2W
Asphalt Cutter
500
5
SP-CS2
Clay Spade
500
33
110
50
K09913
Part No.
Description
Length mm
Pack Qty
K08979
Complete with 2.0mm thick blade.
280
5
K08986
2.0mm Blade for Floor Scraper
170
5
K061040K
18pcs Repair Part for Floor Scraper. Contents: 2 - Rubber,
4 - Screw, 4 - Nut 8 - Spring Washer.
Floor Scraper
Blade
Repair Kit to Floor Scraper
5
power hammer toolsHAR
suitable for: Hitachi, Kango, Makita, Ryobi 30mm
Part No.
Description
Length mm
Pack Qty
Part No.
Description
Length mm
Pack Qty
BS1-618-600-011
Moil Point
400
5
HT944961
Moil Point
450
5
BS1-618-600-202
Flat Chisel
400
5
HT944962
Flat Chisel
450
5
Wide Scaling
Chisel
300
5
HT944964
Wide Scaling
Chisel
410
5
HT944967S
Clay Spade
500
5
HT944968
Asphalt Cutter
500
5
HT9606
FCT Shank
To suit floor
cleaning tool
400
5
30
25
suitable for sds-max shank
75
110
75
BS9913
Clay Spade
500
5
135
110
BS1-618-601017S
125
BS9923A
Asphalt Cutter
500
5
17.2
3º
BS9606
FCT Shank
To suit floor
cleaning tool.
17.2
3º
400
5
suitable for sds - plus shank
Part No.
Description
Length mm
Pack Qty
BS1-618-600-009
Moil Point
250
5
BS1-618-600-010
Flat Chisel
250
5
BS1-618-601-002
40mm Wide Chisel
250
5
ABN 80 069 961 968
sHARDENERS / PRIMERS & UNDERLAYS
Liquid Hardeners
Integral Hardeners
Durafloor HD
Nitoflor Sicaltop
Liquid floor hardener / densifier / dustproofer - clear.
Floor hardener, silicon carbide / alumina additive - dry shake on.
Uses
Uses
On any new or existing internal concrete or masonry surface.
Nitoflor Sicaltop provides a non-rusting, extremely hard wearing,
abrasion and slip resistant surface to new concrete floors.
Part ID
Supply (L)
505002
5
505001
20
505005
200
Durafloor HD-S
Part ID
Supply (kg)
402040
20
Nitoflor Sicaltop Spreader
Liquid floor hardener / densifier / stain resistant / sheen
sealer - clear.
Uses
Part ID
Description
BM-TV-830
SICALTOP COLOUR SPREADER
On any new or existing internal concrete or masonry surface.
Part ID
Supply (L)
505004
5
505003
20
Exposed Aggregate Finish
Preco RWB
Primers
Surface revealing liquid for exposed aggregate finish on fresh concrete.
Durafloor Level Prime
Uses
High performance primer for Cemtop XD, Cemtop GP
Advanced, Durafloor Leveltop, Durafloor Leveltop Rapid and
Durafloor Levelbase.
Uses
Concentrated high performance primer for cementitious
underlays.
Part ID
Preco RWB is used to reveal aggregate in freshly placed
horizontal concrete by delaying the surface set so that the
mortar paste may be brushed and washed from between
the aggregate particles, after the mass of the concrete has
set.
Part ID
Supply (L)
Supply (L)
156080
20
1
156085
200
480005
480016
5
480017
20
Nitoprime Zincrich
Zinc-rich epoxy resin primer to protect steel reinforcement
within repair mortar.
Uses
Nitoprime Zincrich is the recommended anti-corrosion primer
for exposed steel reinforcement for use with Renderoc concrete
repair mortars.
Part ID
Supply (L)
322100
1
Cementitious & Resin Underlays
Cemtop GP Advanced
High performance floor underlay, self smoothing, levelling
mortar for carpet / tiles (2-50 mm thickness) with enhanced
flow properties for fast and easy application.
Uses
Cemtop GP Advanced is designed as a heavy duty underlay
which forms a smooth, hard surface for a variety of floor
finishes including carpet and ceramic tiles.
Primer No.13
Used on porous surfaces with Emer-Seal 200, Emer-Seal
PU40 and Emer-Seal CR.
Part ID
Supply (ml)
665221
250
Primer No.21
Part ID
Supply (kg)
430088
18
Durafloor Leveltop
Floor underlay, self smoothing, levelling mortar for vinyl /
carpet / timber (0 - 50 mm thickness).
Uses
Used on porous surfaces with Emer-Seal PU25 & Emer-Seal
PU40 if required.
Part ID
Supply (ml)
665228
250
Durafloor Leveltop is designed as an internal high performance,
easily installed underlay which forms a very smooth, hard
surface for a variety of floor finishes including carpet, ceramic
tiles, rubber, sheet vinyl and timber flooring.
Part ID
Supply (kg)
430092
15
UNDERLAYS & TOPPINGS
Durafloor Leveltop Rapid
Cemtop XD
Floor underlay, trowellable, rapid hardening, levelling
mortar for carpet / tiles / vinyl (0-50 mm thickness).
Cementitious floor topping internal trafficable wear
surface (6-12 mm thickness).
Uses
Part ID
Description
Durafloor Leveltop Rapid is designed as a heavy duty floor
repair compound which provides a very smooth surface
allowing the smooth installation of carpet, ceramic tiles
sheet rubber, sheet vinyl and vinyl tiles.
402055
Cemtop XD 15kg
Part ID
Supply (kg)
430105
20
Aegis MSP
Cementitious floor topping internal / external trafficable
waterproofing surface (2-4 mm thickness).
Uses
Durafloor Levelbase
Floor underlay, economical sub-base build mortar
(up to 200 mm thickness).
Uses
Durafloor Levelbase is designed as a heavy duty sub-base
underlay which forms a smooth, hard surface to be used under
Durafloor Leveltop and Fosroc Cemtop GP Advanced & XD
where deep sections are required.
Part ID
Supply (kg)
430095
20
Nitomortar 903
Aegis MSP is used to provide a strong and durable
cementitious coating that can be applied to a wide variety of
substrates, including concrete, concrete blocks, polystyrene
blocks, aerated concrete blocks (AAC), asphalt and fibre
cement.
Part ID
Description
752003
Aegis MSP Coarse Grey 20kg
752001
Aegis MSP Fine Grey 20kg
750007
Aegis Surface Primer #1 20L
Durafloor SL
Solvent free, general purpose, epoxy binder system.
Floor topping, industrial, self smoothing epoxy resin
system (2-4 mm thickness).
Uses
Uses
Nitomortar 903 can be combined with selected fillers
and aggregates to produce epoxy mortars of various
consistencies. Also used as a priming system with some
Durafloor epoxy flooring products.
Durafloor SL provides a dense, impervious, coloured and
chemically resistant floor surface which is hygienic and
easy to clean.
Part ID
Description
481019
Nitomortar 903 Base Resin 20L
481040
Nitomortar 903 Base Resin 200L
481018
Nitomortar 903 Hardener 10L
481017
481065
Floor Toppings
Durafloor V Anti-Skid
Heavy duty, flow applied, lightweight anti-skid surface
dressing.
Part ID
Description
405400
Durafloor SL Base Resin 16L Pack
405800
Durafloor SL Base Resin 200L
405700
Durafloor SL Hardener 16L Pack
405805
Durafloor SL Hardener 200L
404045
Durafloor SL Fillers 10kg
404047
Durafloor SLX
Floor topping, industrial, self smoothing epoxy
resin system for cold weather application (2-4 mm
thickness).
Part ID
Description
405900
Durafloor SLX Base Resin 16L Pack
402000
Durafloor SLX Base Resin 200L
Description
405910
Durafloor SLX Hardener 16L Pack
400400
Durafloor V Anti-Skid Base 16L Pack
402005
Durafloor SLX Hardener 200L
400405
Durafloor V Anti-Skid Hardener 16L Pack
404045
400410
Durafloor V Anti-Skid Fillers 16L Pack
404047
405760
Durafloor Heavy Duty Aggregate 25kg
Part ID
Durafloor N (Novolac)
Durafloor TF
Floor topping, trowel applied, high build epoxy resin
system (5 mm thickness).
Part ID
Description
405345
Durafloor TF Base Resin15L
405350
Durafloor TF Hardener 5L
405355
Durafloor TF Fillers 20kg
HIghly chemically resistant Novolac epoxy clear binder
produces various coating and topping application
systems.
Uses
Durafloor N is an all purpose, highly chemically resistant
Novolac epoxy coating/topping system suitable for a
number of surfaces including concrete, steel and masonry.
Part ID
Description
401040
Durafloor N (Novolac) Base 15L
401045
Durafloor N (Novolac) Hardener 10L
ABN 80 069 961 968
TOPPINGS & COATINGS
Durafloor X
Durafloor FC
Durafloor X produces a topping and coating system
with a textured finish, which provides a hard-wearing,
chemically resistant floor that can handle extreme
temperatures. The system also has anti-microbial
properties which reduce the growth of bacteria and
mould.
Floor/wall coating, solvent free epoxy, fast cure.
Uses
Durafloor X has been designed to produce a flooring
system for applications that require high resistance to
mechanical stress and chemical attack, that are subject
to extreme temperatures and need to be applied within a
limited timeframe. Typical uses for the system are in wet
processing zones in chemical processing plants and food
preparation and manufacturing areas.
Part ID
description
405854
DURAFLOOR X COAT PART A - 4.83KG KIT
405855
DURAFLOOR X COAT PART B - 4.83KG KIT
405856
DURAFLOOR X COAT PART C - 4.83KG KIT
405848
DURAFLOOR X PRIMER BASE 10KG KIT
405849
DURAFLOOR X PRIMER HARDENER 10KG KIT
405850
DURAFLOOR XT BASE
405851
DURAFLOOR XT HARDENER
405852
DURAFLOOR XT FILLER 2
405853
DURAFLOOR XT FILLER 1
Coatings
Durafloor HP
Floor coating, high performance epoxy, solvent free,
non-tainting.
Uses
Durafloor HP is a heavy duty, industrial/commercial coating
for concrete floors and walls that is attractive and easily
cleaned. Highly resistant to chemical attack and the action
of forklift vehicular and commercial type traffic.
Part ID
Description
414501
Durafloor HP Base Resin 8L Pack
414210
Durafloor HP Special Colour Base Resin 8L Pack
414414
Durafloor HP Special Colour Base Resin 16L Pack
414502
Durafloor HP Hardener 8L Pack
414415
Durafloor HP Hardener 16L Pack
Uses
A heavy duty, 100% solids, non-skid surface coating
for concrete and steel floors that is attractive and easily
of vehicular and foot traffic.
Part ID
Description
414504
Durafloor FC 4L Pack
Durafloor TC PLUS
Trafficable Coating System.
Uses
To provide a hard wearing surface, reduce noise and
improve the appearance of multi-storey car park floors
and other trafficable areas in both new construction and
refurbishment projects. Available as an external waterproof
system for exposed car park decks and a wearing coat
system for intermediate car park levels, basements and
other internal trafficable areas.
Part ID
Description
405750
PRIMER BASE 10KG KIT
405751
PRIMER HARD 10KG KIT
405752
MEMBRANE BASE KIT 15KG
405753
MEMBRANE HARD KIT 15KG
405754
BODY COAT BASE 20KG KIT
405755
BODY COAT HARD 20KG KIT
405756
T/COAT MED GRY BASE 10
405757
T/COAT ALL COLOUR HARD
405758
T/COAT SP COLOUR BASE
Please contact your nearest branch regarding aggregate
options for Durafloor TC Plus.
Nitoflor FC100
Floor sealer, general purpose solvent based, UV stable,
acrylic coating.
Uses
Nitoflor can be used as a sealer for concrete floors to
provide a dustproof and more easily cleaned surface with
resistance to penetration of oils and other liquids. Ideal for
warehouses, car parks, light industrial buildings, etc.
414505
Durafloor HP 4L Pack
Part ID
Description
414507
Durafloor HP Special Colour 4L
410002
Nitoflor FC100 Clear 20L
Durafloor HS
Floor coating, economical, high build epoxy, 90% solids
410001
Nitoflor FC100 Clear 200L
411022
Nitoflor FC100 Special Colour 20L
561574
Nitoflor FC100 T&G Grey 20L
561572
Nitoflor FC100 T&G Grey 200L
Uses
Durafloor HS is a heavy duty, commercial abrasion resistant
treatment for concrete floors that is attractive and easily
of commercial type traffic.
Suitable for use in wet areas where strict levels of hygiene
and cleanliness are required or where chemicals are
manufactured, spilled or are an integral part of the process.
Nitoflor FC120 HB
Coloured floor coating, chlorinated rubber, UV stable,
for trafficable floors and carparks.
Uses
Nitoflor FC120 is suitable for use in heavy traffic areas
such as light industrial traffic, stairs, fuel station forecourts,
driveways and parking stations.
Part ID
Description
414600
Durafloor HS Base 8L Pack
Part ID
Description
414649
Durafloor HS Hardener 8L Pack
411050
Nitroflor FC120 HB Black 20L
411070
Nitroflor FC120 HB Silver Grey 20L
COATINGS / dECORATIVE FLOOR TOPPINGSdeco
Nitoflor FC130
Floor/wall coating, economical, water based epoxy,
chemical resistant.
Uses
Nitoflor FC130 is used to provide a dust-proof, easily
cleaned surface which is resistant to most oils and liquids.
It is suitable for use on walls and floors in warehouses,
garages, light industrial and food processing areas, kitchens
and other areas of pedestrian and light vehicular traffic.
Toppings & Coatings
Colour Packs
Durafloor Colour Paks
Available in Durafloor SL, TF, HS, HP, FC & N
See Durafloor Colour Chart for colours.
Part ID
description
440001
DURAFLOOR COL PAK BANKSIA 0.5KG
Part ID
Description
440010
DURAFLOOR COL PAK CREAM 0.5KG
412184
Nitoflor FC130 Base For Colour Packs 3L
440013
DURAFLOOR COL PAK FERN GREEN 0.5KG
412182
Nitoflor FC130 Clear Base 2.9L
440003
DURAFLOOR COLOUR PAK BLACK 0.5KG
412181
Nitoflor FC130 Clear Hardener 13.1L
440018
DURAFLOOR COLOUR PAK HARBOUR BLUE 0.5KG
412196
Nitoflor FC130 Mid Grey Hardener 13L
440042
DURAFLOOR COLOUR PAK KOALA GREY 0.5KG
412183
Nitoflor FC130 Silver Grey Hardener 13L
440075
DURAFLOOR COLOUR PAK LIGHT GREY BLUE 0.5KG
412215
Nitoflor FC130 Silver Trophy Hardener 13L
444000
DURAFLOOR COLOUR PAK OFF WHITE 0.5KG
412210
Nitoflor FC130 Special Colour Hardener 13L
440026
DURAFLOOR COLOUR PAK PASTEL GREY 0.5KG
412180
Nitoflor FC130 Silver Grey 4L Pack
440029
DURAFLOOR COLOUR PAK RASPBERRY 0.5KG
440070
DURAFLOOR COLOUR PAK SAFETY YELLOW 0.5KG
Durafloor PU
Single pack, high build, clear high gloss, high abrasion
resistant polyurethane coating.
440031
DURAFLOOR COLOUR PAK SAND 0.5KG
440017
DURAFLOOR COLOUR PAK SILVER GREY 0.5KG
440059
DURAFLOOR COLOUR PAK WOOLWORTHS RED 0.5KG
440061
DURAFLOOR COLOUR PAK WOOLWORTHS GREY 0.5KG
Uses
Durafloor PU is a high build coating, formulated for both
interior and exterior applications to provide a clear, high
gloss, high abrasion resistant finish.
Part ID
Supply (L)
400650
5
400655
20
Decorative Floor Toppings
Lustreseal M20
Premium Polyurethane, High Solids Sealer.
Uses
Durafloor SR
Modified synthetic rubber based flooring coating.
Uses
Specifically formulated to provide quick drying, hard
wearing, trafficable surfaces for floors including workshops,
storerooms, undercover parking areas et
Part ID
The toughest sealer in the Lustreseal range - very high gloss
and extremely hard. Suitable over Mastershield polymer
flooring, Covacrete and other concrete (incl. Stamp/Stencil) and
masonry surfaces in thoroughly dry conditions. Also ideal over
polished concrete. M20 is a moisture curing single pack
polyurethane.
Part ID
description
UA20A
UA20 Urethane Acrylic - 8.7Lt Part A
UA20B
UA20 Urethane Acrylic - 1.25Lt Part B
Supply (L)
561310
4
561311
20
Mastershield M50
Economical Epoxy Flooring or Surface Primer.
Uses
A two pack Aqueous Epoxy that can be used as a primer or as a
base for epoxy flooring. May be tinted (aqueous tints), flaked or
sprayed in contrasting flecks. Provides a low gloss, satin finish.
Highly economical epoxy flooring. FOR INSIDE USE - Special
application for outside use.
Part ID
description
MS50A
Mastershield - M50 - 5L - Part A - Opaque Base NSI
MS50NTA
Mastershield - M50 - 5L - Part A - Neutral Base NSI NLA
MS50B
Mastershield - M50 - 5L - Part B - For Opaque and Neutral
Bases NSI
ABN 80 069 961 968
decorative floor TOPPINGS & concrete sealers
Mastershield M90
lustreseal colour tint
Premium Epoxy Commercial Flooring Product.
Colour liquid dispersion of organic and inorganic pigments.
Uses
USES
Premium Polymer flooring product. May be tinted, flaked and
other decorative inclusions. Clear product that may be used to
suspend objects, graphics or lighting for a novelty feature floor.
Chemical resistant - ideal for commercial and industrial floors.
FOR INSIDE USE - Special application for outside use.
Lustreseal Colour Tint is added to Lustreseal Acrylic Sealer
to give various shades of colour to stamped, stencilled or
plain concrete. Can also be used to tint Mastershield M90.
Part ID
description
MS90A
Mastershield - M90 - 6L - Part A
MS90B
Mastershield - M90 - 4L - Part B
MS90C
Mastershield - M90 - 2L - Part C - Fast Cure Hardener NLA
MS905KIT
Mastershield - M90 - 5L Kit
MS90MVA
Mastershield - M90 - MV Part A
Part ID
description
LSAPR
LUSTRESEAL TINT APRICOT 1LTR
LSBAR
LUSTRESEAL TINT BARLEY 1LTR
LSBEI
LUSTRESEAL TINT BEIGE 1LTR
LSBLA
LUSTRESEAL TINT BLACK 1LTR
LSBLU
LUSTRESEAL TINT BLUESTONE 1LTR
LSBRI
LUSTRESEAL TINT BRICK RED 1LTR
LSBRO
LUSTRESEAL TINT BRONZE 1LTR
LSBUR
LUSTRESEAL TINT BURGUNDY 1LTR
LSCHA
LUSTRESEAL TINT CHARCOAL 1LTR
LSCIN
LUSTRESEAL TINT CINNAMON 1LTR
High Solids, Gloss Urethane Sealer
LSCOF
LUSTRESEAL TINT COFFEE BROWN 1LTR
Uses
LSCRE
LUSTRESEAL TINT CREAM 1LTR
Mastershield UA20
Used as a high gloss finish and advanced protection over
Mastershield polymer flooring, Covacrete, Stampcrete,
Stencilcrete and other concrete and masonry surfaces. Also
ideal over polished concrete. Exceptional performance for
economy.
LSGRY
LUSTRESEAL TINT GREY 1LTR
LSGUM
LUSTRESEAL TINT BLUE GUM 1LTR
LSLIG
LUSTRESEAL TINT LIGHT TERRACOTTA 1LTR
LSMAR
LUSTRESEAL TINT MARIGOLD 1LTR
LSNUT
LUSTRESEAL TINT NUTMEG 1LTR
LSROS
LUSTRESEAL TINT BLUSHING ROSE 1LTR
LUSTRESEAL TINT SAHARA SAND 1LTR
Part ID
description
LSSAH
UA20A
UA20 Urethane Acrylic - 8.7Lt Part A
LSSAN
LUSTRESEAL TINT SAND 1LTR
UA20B
UA20 Urethane Acrylic - 1.25Lt Part B
LSTER
LUSTRESEAL TINT TERRACOTTA 1LTR
LSVIN
LUSTRESEAL TINT VINTAGE BUFF 1LTR
LSWHI
LUSTRESEAL TINT WHITE 1LTR
aqueous tints
Colour liquid dispersion of organic and inorganic pigments
USES
For colouring Mastershield M50, Covacrete Base Powder.
Part ID
description
MTBIS
Mastershield - Aqueous Tint - Biscuit
MTBON
Mastershield - Aqueous Tint - Bone
MTCLA
Mastershield - Aqueous Tint - Clay
MTMUS
Mastershield - Aqueous Tint - Musk
MTOUT
Mastershield - Aqueous Tint - Outback
MTSIL
Mastershield - Aqueous Tint - Silver Grey
MTTAN
Mastershield - Aqueous Tint - Tan
MTBRWHT
Mastershield - Aqueous Tint - White
external Concrete Sealers
Acrylic Sealer
Standard sealer used for stencil & stamped surfaces.
Good all-round concrete sealer.
Durable
Easy to apply & maintain
Semi gloss finish
High clarity
Tintable
Uses
Used as a high quality, gloss protective finish over decorative
and other concrete and masonry surfaces. For best results,
first prime with Lustreseal Superbond.
MTBRBL
Mastershield - Aqueous Tint - Black
MTBRTY
Mastershield - Aqueous Tint - Bright Yellow
Part ID
MTBRTR
Mastershield - Aqueous Tint - Bright Red
ACR5
5
MTBRTG
Mastershield - Aqueous Tint - Bright Green
ACR20
20
MTBRTB
Mastershield - Aqueous Tint - Bright Blue
ACR200
200
Supply (L)
Extended Wear Plus
Mastershield FLAKE
Decorative flooring polymer flake.
Uses
Mastershield Polymer Flake is used in decorative Polymer
Flooring.
Part ID
description
PFFLA
Mastershield Flake - Flake Various NSI
Hard wearing, high gloss sealer.
High durability
Excellent fuel, oil, mould & fungi resistance
Semi gloss - high clarity
Excellent marking resistance
Uses
Used for extended longevity in place of Acrylic Sealer for most
concrete and masonry surfaces. Provides superior protection from
the ingression of dirt, mould, fungi, fuel and oil. High quality wet-look
finish. For best results, first prime with Lustreseal Superbond.
Part ID
Supply (L)
EXT20
20
EXT200
200
concrete sealers / tools & equipmenttoo
MATT finish SEALER
When a natural look is more appealing than a gloss.

Natural low lustre
Good marking resistance
Hard wearing
Stylish alternative
Tintable
Uses
Used as a natural low sheen finish coat for most decorative concrete
or masonry surfaces. Popular as an alternative finish for internal
floors and also as a natural look finish for resurfaced concrete,
stamped impression concrete and stencil concrete. Low lustre
masks minor marking and scuffing. For best results, first prime with
Lustreseal Superbond. (Not to be used as a first coat primer).
Part ID
Supply (L)
ACRM20
20
Solvent
Part ID
Flooring Tools & Equipment
Hopper Gun
Part ID
Description
MH-MP001
HOPPER GUN FOR TEXTURE SPRAYING
HG2006
MARSHALLTOWN HOPPER GUN
HG2007
HOPPER GUN SPEAR & JACKSON
13L Pressure Sprayer
Part ID
Description
MH-SP35C
13LT PRESSURE SPRAYER (CONC SEALER)
Chapin Premium Sprayer
Part ID
Description
SA6007
CHAPIN PREMIER SPRAYER
Supply (L)
SOL4
4
SOL10
10
SOL20
20
MIXERS/STIRRERS/PADDLES
Superbond
Same day prime sealer.
Excellent moisture tolerance
Priming sealer
High penetration & adhesion
Flexible
Ideal for use as resealing primer
Great for sealing exposed aggregate
MH-MDR56
THREADED TOP
Uses
MH-MDR57
Use as same day sealer/primer for concrete and primer for masonry
and natural stone surfaces (for porous stone - test before use). Also
suitable for resealng - provides essential flexibility between finish
coats (See Reseal Guide). Must be over-coated with a finish sealer
upon surface curing (with the exception of exposed aggregate).
Part ID
Supply (L)
SUP20
20
SUP200
200
internal Concrete
Sealers
Waterbased Acrylic Sealer
The Green Choice for the environmentally smart consumer.
Low odour and ideal for confined spaces or indoor applications.
Low odour - very low VOC
Good marking resistance
Medium gloss
Self-crosslinking polymer
Water clean up
Tintable
Part ID
Supply (L)
WBS20
20L
MH-MDR58
Part ID
Description
MH-MDR56
MIXER - 85 X 500MM WITH 8MM HEX SHAFT
MH-MDR57
MIXER - 130 X 600MM WITH 10MM HEX SHAFT
MH-MDR58
MIXER - 120 X 600MM WITH M14 THREADED TOP
MH-MDR59
MIXER - 140 X 600MM WITH M14 THREADED TOP
Survey Paint
Part ID
Description
MH-ZINCGAL
400G - GALVANISING SPRAY
AMS-350BLK
Spray & Mark 350Ml Black
AMS-350B
Survey Marking Paint Blue
AMS-350FB
Survey Marking Paint Fluro Blue
AMS-350FG
Survey Marking Paint Fluro Green
AMS-350FO
Survey Marking Paint Fluro Orange
AMS-350FP
Survey Marking Paint Fluro Pink
AMS-350FY
Survey Marking Paint Fluro Yellow
AMS-350W
Survey Marking Paint White
AMS-350Y
Survey Marking Paint Yellow
Brooms
Part ID
Length (mm)
FB-1572
600mm BROOM HEAD C/W FIXED BRACKET
FB-1573
FB-1574
ABN 80 069 961 968
enttools & Equipment
Mixing Buckets
ELECTRIC MIXER

1600W, 240V/50Hz for extra torque
2 speed gear box
Variable speed control
M14 female thread
Lightweight
Soft grip handles
Professional German quality
Ideal for mixing render and plaster compound
With FREE mixing paddle
Part ID
Description
1600W ELECTRIC MIXER
Cam Rakes
Description
FL-MWR-57081
CAM 1 - FOR CAM GAUGE RAKE
FL-MWR-57082
FL-MWR-57083
FL-MWR-57084
FL-MWR-57085
FL-MWR-57086
FL-MWR-57088
FL-MWR-57020
CAM GUAGE RAKE 1200MM
FL-MWR-57000
FL-MWR-57010
FL-MWR-68611
REPLACEMENT WIRE SET OF 3
FL-MWR-68616
REPLACEMENT WIRE SET OF 4
FL-MWR-57081-88
SET OF CAM SIZES: 1-8
FL-MWR-58609
WIRE GUAGE RAKE 600MM
FL-MWR58734
WIRE GUAGE RAKE 900MM
Blade Dimension (mm)
Blade Gauge
280 x 120
Light
FP1002
S* = Stainless Steel
Pointed Trowels
FP1002
Part ID
Blade Dimension (mm)
Blade Gauge
FP1001
120 x 365
Light
FP1009
100 x 355
Light
FP1091
115 x 405
Light
FP1092
115 x 450
Light
115 x 500
Light
FP1093
S* = Stainless Steel
ProSoft Handle
Blower
Part ID
Description
HT-RB24E
Blower
20
Part ID
Description
MH-64450
SQUEEGEE ALUM FRAME - 450MM
MH-64600
MH-64900
Rollers
Part ID
Description
SA6004
460mm ADJUSTABLE FRAMEAND EXTENTION POLE
SA6039
ALUMINIUM EXTENTIONPOLE 1.2M TO 2.4M
FT0027
EXTENSION HANDLE (TEXP)1.2 METER
MH-LW
LAMBSWOOL COVER - 230MM
MH-PK1
PAINT KIT-TRAY,ROLLER & COVER
SA6036
PRO SERIES COVER 230MM SHORT NAP 6MM
MH-RC938
ROLLER COVER - 10MM NAP - 230MM
SA6003
ROLLER COVER 230M LAMBSWOOL COVERS
SA6002
ROLLER COVER 270X 20mm PROD CODE 3313
SA6001
ROLLER COVER 460mm FINE TEXTURE
SA6006
ROLLER FRAME - 230mm
SA6005
ROLLER FRAME - 270mm
SA6037
SPIKED ROLLER 9 + FRAME
SA6032
YOKE FRAME 460MM (SC ROLLER)
Walking Trowel
Square Trowels
Part ID
Supply (L)
770161
Squeegees
MH-EV160
Part ID
Part ID
Part ID
Description
FW-555
WALKING TROWEL 600MM ROUND ENDS
FW-557
WALKING TROWEL 600MM ROUND ENDS S/S
Floor Scraper
Part ID
Description
MH-FS150
150 mm Wide Blade
MH-FS150SB
150 mm Spare Blade
MH-FS200
200 mm Wide Blade
MH-FS200SB
200 mm Spare Blade
MH-FS300
300 mm Wide Blade
MH-FS300SB
300 mm Spare Blade
MH-FS355
355 mm Wide Blade
MH-FS355SB
355 mm Space Blades
Brushes
Part ID
Length
ARW046
30 x 19 x 5cm
Hippo Mixer
Part ID
Description
770302
HIPPO MIXER
ventilating fansWet
AMERIC VENTILATING FANS
The Americ VAF-3000 Series of industrial ventilators are ideal for use in confined spaces that require a powerhouse air ventilator. They rise above the rest blowing away their competion and
can handle the most demanding industrial ventilation requirements. The Americ ventilators can deliver both positive and negative airflow of up to 59 m3/min and can provide all the continuous
circulating airflow needed to get your job done. The VAF-3000P (pneumatic) also meets strict hazardous space standards, delivering high performance with uncompromising safety.
Features

Impact and weather resistant high density polyethylene plastic construction.
Dual wall design protects the interior fan chamber from external damage.
Fans can be stacked vertically, maximising available working space.
Virtually maintenance free - reliability, portability & durability.
VAF-3000
VAF-3000P
Model
VAF3000
Model
VAF3000P
Product Code
VAF-3000
Product Code
VAF-3000P
Electric
Type
Pneumatic
mm (in)
305 (12)
Size
Dimensions (l x w x h)
mm
432 x 355 x 533
Operating Weight
Kg
14.75
RPM
2850
Fan Speed
Power Output
Type
Size
Fan Speed
Power Output
mm (in)
305 (12)
mm
432 x 355 x 533
Operating Weight
Kg
12.7
RPM
3000
HP (Kw))
1 (.75)
HP (Kw))
1.5 (1.1)
Voltage
volts
240
Air Consumption
cfm
38
Current
amp
4.2
Inlet Pressure (max)
psi
100
Hz
50
Noise Level
dBa
86
Frequency
nsWet / Dry vacuum
FAN Accessories
Accessories
Ducting
AIP-DUCT
Duct Carrier
L/Duty Ducting 305mm x 6m
VAF-AM-D1225
H/Duty Quick Connect Ducting 305mm x 7.5m
VAF-AM-CA12
Aluminium Ducting Coupler 305mm
VAF-DSR25-12P
Lightweight Polyethylene Duct Carrier (max 7.5m)
VAF-CDA-3000
Carpet Drying Attachment
Duct Coupler
Carpet Drying Attachment
Air Flow Rates
VAF-3000
Free Air
VAF-3000P
CFM
M3/Min.
CFM
M3/Min.
2091
59.2
2063
58.4
4.5m Straight
1756
49.7
1753
49.6
4.5m 1 x 90° bend
1637
46.3
1616
45.7
4.5m 2 x 90° bends
1500
42.5
1450
41.0
7.5m Straight
1734
49.1
1619
45.8
7.5m 1 x 90° bend
1550
43.9
1497
42.4
7.5m 2 x 90° bends
1498
42.4
1433
40.6
15m Straight
1643
46.5
1531
43.3
30m Straight
1361
38.5
1243
35.2
industrial wet/dry vacs - aussie pumps
A complete range of industrial wet/dry vacuum cleaners ranging in capacity from 30 litres through to 75 litres. The Aussie Eco-Clean industrial wet/dry vacs are available with either
1 or 2 motor combinations.
Features

Impact resist polypropylene barrel
7 metre durable power cable
Unique Aussie Microweb, 99% filtration, reusable filter
Heavy Duty Wheel Kit
Professional accessory kit
Benefits

Powerful suction for effective cleaning
Filters fine dust particles like cement dust, gyprock etc
Hardwearing, long lasting
Easy manoeuvrability
Durable and versatile
Long reach for commercial applications
VS61
VS72
Model No.
Capacity
(Litres)
Motor
Water Lift (head)
mm
Air Flow
(m³/h)
Air Flow
(l/s)
Weight
(kg)
mm
Clean Air 551 (VS61)
50
1 x 1200w 240v bypass
2200 (215bar)
Clean Air 752 (VS72)
75
2 x 1200w 240v bypass
2400 (235bar)
250
60
22
570 x 530 x 920
425
119
28
570 x 530 x 970
ABN 80 069 961 968
At Parchem...
WE SERVICE WHAT WE SELL
Parchem have qualified technicians on staff, to service and repair the
full range of construction equipment.
Because we know your equipment can be your livelihood, Parchem
offer:

Written quotes on all required repairs

All scheduled services

A full range of genuine spare parts
With service departments located across the country, you can feel
confident of reduced down time.
So call us for further information, and to book your next service or
repair.
NSW – Wetherill Park: 02 9756 5494
VIC – Brunswick: 03 9380 2400
QLD – Morningside: 07 3902 2300
SA – Hindmarsh: 08 8241 6000
WA – Belmont: 08 6279 9799
trade stores
We’ve got
the gear
you need
VICTORIA
QUEENSLAND
NEW SOUTH WALES
Beresfield
02 4964 4277
Arundel
07 5500 5600
Brunswick
03 9380 2400
Coffs Harbour
02 6652 3599
Brendale
07 3889 7600
Campbellfield
03 9308 6133
Narellan
02 4647 0623
Gladstone
07 4978 0128
Dandenong
03 8710 7000
Padstow
02 9771 6626
Morningside
07 3902 2300
Penrith
02 4722 9259
Springwood
07 3808 8133
SOUTH AUSTRALIA
Riverstone
02 9627 9133
Townsville
07 4779 4750
Hindmarsh
Tuggerah
02 4352 2287
Wetherill Park
02 8781 2051
TASMANIA
WESTERN AUSTRALIA
Belmont
08 8241 6000
08 6279 9799
Moonah
03 6278 7277
AUSTRALIAN CAPITAL TERRITORY
02 6228 1313
06/13
Fyshwick
Customer Service 1300 737 787
National Head Office: 7 Lucca Road, Wyong NSW 2259 02 4350 5000
The range of products will vary by location so please contact your nearest store for the range of products in stock.
P: 1300 737 787  www.parchem.com.au

flooring catalogue

Transcription

Similar documents

fan coils - Titus HVAC

Employment Equity Act: Public register Designated employers that

Service manual Diamatic 535PRO version 1.0

BMG-735 - Diamatic USA