electronic hid ballasts

ELECTRONIC HID BALLASTS
C ommercial L ighting
2-6
Industrial Lighting
7-11
Street Lighting
12-13
Horticultural Lighting
14-15
COMMERCIAL LIGHTING BALLASTS
20, 39, 70, 150 WATT 230V for MH/CDM Lamps
Features and Benefits:
• More stable operation and faster warm-up time
• Fulham’s Electronic HID Ballasts extend lamp life up to 30%
• Fulham’s low wattage, low frequency Electronic HID
Ballasts compensate for input voltage fluctuations and
provide flicker-free operation
• Lamp End-Of-Life (EOL) protection
• Improved thermal performance
Definition:
Electronic ballasts for applications with low wattage Metal
Halide (MH) or Ceramic Metal Halide (CDM) lamps
Applications:
Business lighting, office lighting, residential lighting, stage
lighting, architectural lighting, decorative lighting, advertising
lighting, and more
2
COMMERCIAL LIGHTING BALLASTS
20, 39, 70, 150 WATT 230V for MH/CDM Lamps
LAMP DATA
CATALOG NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
CASE &
WIRING DIAGRAM
1
H1-230-20HSC
220-240
0.11
25
≥ 0.90
80
1
39
1
H2-230-35HSC
220-240
0.20
44
≥ 0.95
80
1
70
1
H5-230-70HSC
220-240
0.35
78
≥ 0.95
80
1
150
1
HXX-230-150-HBTCS
220-240
0.77
167
≥ 0.95
80
2
WATTS
NUMBER
20
(Please inquire about 50W and 100W models)
1
110
97.5
110
27.5
75
63.5
6.5
32
97.5
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
MOUNTING HEIGHT
WEIGHT
110mm (4.37")
75mm (2.95")
32mm (1.26")
97.5mm (3.84")
63.5mm (2.50")
27.5mm (1.08")
0.28kg (0.62lb)
2
11.25
38
29.5
91
164
68.5
154
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
MOUNTING HEIGHT
WEIGHT
164mm (6.45")
91mm (3.58")
38mm (1.50")
154mm (6.06")
68.5mm (2.7")
29.5mm (1.16")
0.56kg (1.23lb)
Compliances and Approvals:
• ISO 9001
Protections:
• Lamp End-Of-Life (EOL) protection
• Short circuit protection
• Open circuit protection
Installation and Application Notes:
• Ambient Temperature: -20°C through +55°C
• Ignition pulse is 3-4kV max
• Remote Mounting up to 1.5m
• Power to lamp must be cycled (on/off/on) after replacing lamp
• Ballast output will shut down after 30 minutes if lamp fails to ignite
3
Performance Requirements:
Input Voltage: 220-240V, 50/60Hz
Voltage Range: +/-10% of rated voltage
Total Harmonic Distortion (THD):
20W: <20%
39W, 70W, 150W: <15%
Operating Frequency (Typical): 175Hz
Crest Factor: <1.5
COMMERCIAL LIGHTING BALLASTS
20, 39, 50 WATT 120V for MH/CDM Lamps
20, 39, 50, 70, 100, 150, 175 WATT 120-277V for MH/CDM Lamps
Features and Benefits:
• More stable operation and faster warm-up time
• Fulham’s Electronic HID Ballasts extend lamp life up to 30%
• Fulham’s low wattage, low frequency Electronic HID
Ballasts compensate for input voltage fluctuations and
provide flicker-free operation
• Lamp End-Of-Life (EOL) protection
• Improved thermal performance
Definition:
Electronic ballasts for applications with low wattage Metal
Halide (MH) or Ceramic Metal Halide (CDM) lamps
Applications:
Business lighting, office lighting, residential lighting, stage
lighting, architectural lighting, decorative lighting, advertising
lighting, and more
LAMP DATA
WATTS
NUMBER
ANSI CODE
CATALOG
NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
CASE &
WIRING DIAGRAM
20
1
M156,C156,C175,M175
H1-120-22HSC
120
0.21
25
≥ 0.98
3
39
1
M130,C179,C130
H3-120-39HSC
120
0.37
44
≥ 0.98
3
50
1
M110,M1148
H4-120-50HSC
120
0.49
57
≥ 0.98
3
20
1
M156,C156,C175,M175
HXX-UNV-20-HBBCK
120-277
24
≥ 0.90
44
≥ 0.90
58
≥ 0.90
78
≥ 0.90
111
≥ 0.95
39
1
M130,C179,C130
50
1
M110,M1148
70
1
C/M98,C/M139,C/M143
100
1
M90,M140,M164
150
1
M102,M142,M/C142,
M81/M107
175
1
M57,M152,M137
H3-UNV-39HBC
H3-UNV-39HSC
HXX-UNV-50-HBBCK
HXX-UNV-50-HBSCK
H5-UNV-70HBC
H5-UNV-70HSC
H6-UNV-100HSC
H6-UNV-100HBC
H7-UNV-150HSC
H7-UNV-150HBC
H8-UNV-175HBC
H8-UNV-175HSC
0.21A/120V
0.10A/277V
0.37A/120V
120-277
0.18A/277V
0.48A/120V
120-277
0.21A/277V
0.66A/120V
120-277
0.29A/277V
0.97A/120V
120-277
0.42A/277V
1.54A/120V
120-277
0.61A/277V
1.78A/120V
120-277
0.71A/277V
4
164
≥ 0.95
195
≥ 0.95
4
5
4
5
4
5
4
5
4
5
6
7
6
7
COMMERCIAL LIGHTING BALLASTS
20, 39, 50 WATT 120V for MH/CDM Lamps
20, 39, 50, 70, 100, 150, 175 WATT 120-277V for MH/CDM Lamps
31
30.5
87
green
AC
power
75
65
black
white
red
blue
89
95
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
95mm (3.74")
75mm (2.95")
30.5mm (1.20")
87mm (3.43")
65mm (2.56")
0.28kg (0.62lb)
4
38
123
black
16
91.5
73.5
green
50.5
AC
power
white
red
blue
131
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
140mm (5.51")
91.5mm (3.60")
38mm (1.50")
131mm (5.16")
73.5mm (2.89")
0.59kg (1.30lb)
Protections:
• Lamp End-Of-Life (EOL) protection
• Short circuit protection
• Open circuit protection
• Ignition failure protection
• Thermal protection, UNV 120-277V models only
Compliances and Approvals:
• cULus Listed (Outdoor Type 1)
• FCC Part 18, for Non-Consumer Equipment
• ISO 9001
Installation and Application Notes:
• Ambient Temperature: -20°C through +55°C
• Ignition pulse is 3-4kV max
• Remote Mounting up to 1.5m
• Power to lamp must be cycled (on/off/on) after replacing lamp
• Ballast output will shut down after 30 minutes if lamp fails to ignite
5
E328229
Performance Requirements:
Input Voltage: See chart on previous page for
120V and UNV 120-277V, 50/60Hz models
Voltage Range: +/-10% of rated voltage
Total Harmonic Distortion (THD):
20W: <25%
39W, 50W, 70W, 100W: <20%
150W, 175W: <15%
Operating Frequency (Typical): 175Hz
Crest Factor: <1.5
COMMERCIAL LIGHTING BALLASTS
20, 39, 50 WATT 120V for MH/CDM Lamps
20, 39, 50, 70, 100, 150, 175 WATT 120-277V for MH/CDM Lamps
5
38
123
green
black
white
91.5
73.5
AC
power
red
blue
131
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
140mm (5.51")
91.5mm (3.60")
38mm (1.50")
131mm (5.16")
73.5mm (2.89")
0.59kg (1.30lb)
6
164
147
38
green
black
16
91.5
73.5
50.5
AC
power
red
blue
white
155
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
164mm (6.46")
91.5mm (3.60")
38mm (1.50")
155mm (6.10")
73.5mm (2.89")
0.70kg (1.54lb)
7
164
147
38
green
black
91.5
73.5
AC
power
white
red
blue
155
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
164mm (6.46")
91.5mm (3.60")
38mm (1.50")
155mm (6.10")
73.5mm (2.89")
0.70kg (1.54lb)
6
INDUSTRIAL LIGHTING BALLASTS
250, 400 WATT 230V for MH/HPS Lamps
Definition:
Electronic ballasts for applications with low wattage Metal
Halide (MH) or High Pressure Sodium (HPS) lamps
Applications:
Widely used in street lighting, stadium lighting, and industrial lighting
7
Features and Benefits:
• Designed and manufactured with premium long-life
components
• Dimming options available, such as: 0-10V, preset program
dimming, and step dimming
• Communications protocol: Zigbee, DALI, and GSM
• Easy initial installation or field replacement of magnetic
ballasts
• Fulham’s Electronic HID Ballasts compensate for input
voltage fluctuations and provide flicker-free operation
INDUSTRIAL LIGHTING BALLASTS
250, 400 WATT 230V for MH/HPS Lamps
LAMP DATA
CATALOG NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
CASE &
WIRING DIAGRAM
1
HGE-230-250-JSSLK
220-240
1.23
275
≥ 0.98
80
8
1
HGE-230-400-JSSLK
220-240
1.93
430
≥ 0.98
80
8
WATTS
NUMBER
250
400
8
80
98.5
58.7
187
214
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
214mm (8.43")
98.5mm (3.88")
58.7mm (2.31")
202mm (7.95")
80mm (3.15")
1.3kg (2.87lb)
Compliances and Approvals:
• CE Marking
• ISO 9001
Protections:
• Lamp End-Of-Life (EOL) protection
• Short circuit protection
• Open circuit protection
• Ignition failure protection
• Thermal protection
Installation and Application Notes:
• Ambient Temperature: -30°C through +50°C
• Ignition pulse is 5kV max
• Remote Mounting up to 1.5m
• Power to lamp must be cycled (on/off/on) after replacing lamp
• Ballast output will shut down after 30 minutes if lamp fails to ignite
8
Performance Requirements:
Input Voltage: 220-240V, 50/60Hz
Voltage Range: +/-10% of rated voltage
Total Harmonic Distortion (THD): <10%
Operating Frequency (Typical): 70-120kHz
Crest Factor: <1.7
INDUSTRIAL LIGHTING BALLASTS
250, 400 WATT 230V for MH/CDM Lamps
Features and Benefits:
• More stable operation and faster warm-up time
• Fulham’s Electronic HID Ballasts extend lamp life up to 30%
• Fulham’s low wattage, low frequency Electronic HID
Ballasts compensate for input voltage fluctuations and
Definition:
Electronic ballasts for applications with low wattage Metal
Halide (MH) or Ceramic Metal Halide (CDM) lamps
Applications:
• Lamp End-Of-Life (EOL) protection
• Improved thermal performance
sculptured eaves, and more
LAMP DATA
CATALOG NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
CASE &
WIRING DIAGRAM
1
HXE-230-250-HBSLS
220-240
1.23
275
≥ 0.98
80
9
1
HXE-230-400-HBSLS
220-240
1.93
430
≥ 0.98
80
9
WATTS
NUMBER
250
400
65
9
26
6
40
95
240
226
210
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
240mm (9.44")
95mm (3.74")
65mm (2.56")
226mm (8.90")
40mm (1.57")
0.85kg (1.87lb)
9
INDUSTRIAL LIGHTING BALLASTS
140, 150 WATT 230V and 150 WATT 120-277V for use with:
PHILIPS CosmoWhite 140W Lamps
GE StreetWiseTM 150W Lamps
SYLVANIA Urban White 140W Lamps
Definition:
Electronic ballasts for applications with low wattage Metal
Halide (MH) or Ceramic Metal Halide (CDM) lamps
Applications:
Outdoor: Road lighting, port lighting, recreational
park lighting, etc.
Indoor: Large (highbay) retail outlets, warehouses,
manufacturing facilities, etc.
Features and Benefits:
• Designed for newer energy efficient lamps
• Up to 118lm/W, perfect for OEM or retrofit applications
• 2800K color temperature, Ra 66
• Compact housing is easy to install and suitable for small lamp fixtures
• Up to 20,000 hours lifetime
• 50%-100% dimming
• Waterproof rating: IP65
• Improved thermal performance
10
INDUSTRIAL LIGHTING BALLASTS
140, 150 WATT 230V and 150 WATT 120-277V for use with:
PHILIPS CosmoWhite 140W Lamps
GE StreetWiseTM 150W Lamps
SYLVANIA Urban White 140W Lamps
LAMP DATA
CATALOG NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
CASE &
WIRING DIAGRAM
1
HXX-230-140-HSSLW
220-240
0.71
156
≥ 0.95
80
10
150
1
HXE-230-150-JSSLW
220-240
0.77
167
≥ 0.95
80
10
150
1
HXX-UNV-150-JSSLW
120-277
1.54@120V
0.61@277V
167
≥ 0.95
80
10
WATTS
NUMBER
140
10
41
70
113
160
173
182
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
182mm (7.17")
113mm (4.45")
41mm (1.61")
173mm (6.81")
70mm (2.76")
1.23kg (2.71lb)
Compliances and Approvals:
• cULus Listed (Outdoor Type 1)
• FCC Part 18, for Non-Consumer Equipment
• ISO 9001: 2008
Protections:
• Lamp End-Of-Life (EOL) protection
• Short circuit protection
• Open circuit protection
• Ignition failure protection
• Thermal protection
Installation and Application Notes:
• Ambient Temperature: -30°C through +50°C
• Ignition pulse is 5kV max
• Remote Mounting up to 1.5m
• Power to lamp must be cycled (on/off/on) after replacing lamp
• Ballast output will shut down after 30 minutes if lamp fails to ignite
11
E328229
Performance Requirements:
Input Voltage: See above chart for 230V and
UNV 120-277V, 50/60Hz models
Voltage Range: +/-10% of rated voltage
Total Harmonic Distortion (THD):
220-240V 140W, 150W: <10%
120-277V 150W: <15%
Operating Frequency (Typical): 175Hz
Crest Factor: <1.7
STREET LIGHTING BALLASTS
150 WATT 230V for MH/HPS Lamps
Features and Benefits:
• Easily retrofit existing magnetic ballast applications
• One Fulham Electronic HID ballast replaces a magnetic ballast,
capacitor, and ignitor
• More stable operation and faster warm-up time
• Fulham’s Electronic HID Ballasts extend lamp life up to 30%
• Fulham’s low wattage, low frequency Electronic HID
Ballasts compensate for input voltage fluctuations and
provide flicker-free operation
• Lamp End-Of-Life (EOL) protection
• Improved thermal performance
• Waterproof rating: IP65
Around the globe, “green” technology is quickly becoming the
preferred choice for lighting due to its energy saving
properties and ROI potential. At Fulham, we are committed to
promoting the adoption of cost efficient lighting technologies
in new fields. For example, we offer a complete EHID road lighting
solution that reduces power consumption by 40-60% compared
with traditional street lights.
Applications:
Street lighting, port lighting, recreational park lighting, etc.
12
STREET LIGHTING BALLASTS
150 WATT 230V for MH/HPS Lamps
LAMP DATA
WATTS
NUMBER
SOURCE
CATALOG
NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
CASE & WIRE
DIAGRAM
150
1
MH&HPS
HGE-230-150-JSSLW
220-240
0.77
167
≥ 0.95
80
11
41
11
CASE LENGTH
CASE WIDTH
HEIGHT
MOUNTING LENGTH
MOUNTING WIDTH
WEIGHT
182mm (7.17")
113mm (4.45")
41mm (1.61")
173mm (6.81")
70mm (2.76")
1.23kg (2.71lb)
Performance Requirements:
Input Voltage: 220-240V, 50/60Hz
Voltage Range: +/-10% of rated voltage
Total Harmonic Distortion (THD): <15%
Operating Frequency (Typical): 175Hz
Crest Factor: <1.7
Protections:
• Lamp End-Of-Life (EOL) protection
• Short circuit protection
• Open circuit protection
• Ignition failure protection
• Thermal protection
Installation and Application Notes:
• Ambient Temperature: -40°C through +50°C
• Ignition pulse is 5kV max
• Remote Mounting up to 1.5m
• Power to lamp must be cycled (on/off/on) after replacing lamp
• Ballast output will shutdown after 30 minutes if lamp fails to ignite
13
HORTICULTURAL LIGHTING BALLASTS
14
HORTICULTURAL LIGHTING BALLASTS
CATALOG NUMBER
NOTES
APPROVAL
INPUT VOLTAGE (V)
INPUT CURRENT (A)
INPUT POWER (W)
LAMP TYPE (W/V)
HXX-277-1K-JGSHW
277
3.9
1050
1000/400
HXX-480-575-JGSCW
480
1.3
605
575/230
HXX-277-600-JGSHW
277
2.3
645
600/400
HXX-347-600-JGSHW
347
1.9
645
600/400
HXX-480-600-JGCUS
UL
480
1.37
645
600/400
HPX-MLT-600-JGSLB
UL
120-240
5.5/2.75
650/630
600/230
UL
120-240
5.5/2.75
650/630
600/230
UL
120-240
5.5/2.75
650/630
600/230
UL
120-240
5.5/2.75
650/630
600/230
277
2.91
790
750/400
HPX-MLT-600-JGSLK
HPX-MLT-600-JGSLM1
3 step
dimming model
HXX-MLT-600-JGSLM
HXX-277-750-JGSHW
HXX-347-750-JGCUS
UL
347
2.31
790
750/400
HXX-277-1K-JGTUS
UL
277
3.85
1050
1000/400
HXX-347-1K-JGTUS
UL
347
3.07
1050
1000/400
HXX-347-1K-JGSHW
347
3.07
1050
1000/400
HXA-400-1K-JGSHW
400
2.61
1045
1000/400
UL
120-240
9.2/4.5
1110/1070
1000/400
UL
120-240
9.2/4.5
1110/1070
1000/400
HXX-MLT-1K-JGSLB
UL
120-240
9.2/4.5
1110/1070
1000/400
HXX-MLT-1K-JGSLM
UL
120-240
9.2/4.5
1110/1070
1000/400
HXX-230-600-SGTLS
230
2.85
645
600/230
HXE-230-600-SGCUS
230
2.85
645
600/400
HXX-347-600-SGCUS
347
1.88
645
600/400
HXX-347-600-SGSHW
347
1.9
645
600/400
HXX-347-750-SGCUS
347
2.31
790
750/400
HME-400-750-SGCUS
400
1.98
790
750/400
HXE-400-750-SGTUS
400
1.98
790
750/400
HXE-400-750-SGCUS
400
1.98
790
750/400
HXE-400-1K-SGTUS
400
2.61
1045
1000/400
HXX-480-750-JGSCW
480
1.68
790
750/400
480
1.68
790
750/400
HXE-400-600-SGTUS
400
1.61
645
600/400
HXX-380-600-SGSHW
380
1.37
645
600/400
HPX-MLT-1K-JGSLK
HPX-MLT-1K-JGSLM1
HXX-480-750-JGCUS
3 step
dimming model
UL
HPX-MLT-1K-JGSLG1
UL
120-240
9.2/4.5
1110/1070
1000/400
HXX-MLT-600-JGSLW
UL
120-240
5.5/2.75
650/630
600/230
HXX-MLT-1K-JGSLW
UL
120-240
9.2/4.5
1110/1070
1000/400
15
Fulham Headquarters (USA)
12705 S. Van Ness Avenue
Hawthorne, CA 90250
Tel: (323) 599-5000
Fax: (323) 754-9060
[email protected]
www.fulham.com
Fulham Latin America
(Latin America)
12705 S. Van Ness Avenue
Hawthorne, CA 90250
U.S.A.
Tel: (407) 758-2564
[email protected]
Fulham Company Ltd. (International)
Unit 6, 6/F, Kowloon Plaza
485 Castle Peak Road
Cheung Sha Wan, Kowloon
Hong Kong
Tel: +852-2314-4801
Fax: +852-2314-4186
[email protected]
Fulham Company GmbH (Europe)
Karolinenstrasse 18
D-58507 Lüdenscheid
Germany
Handelsregister Iserlohn: HR B 6286
USt.-IdNr.: DE253959344
Fon: +49 2351 4327416
Fax: +49 2351 6567349
Mobile: +49 152-0-9838495
[email protected]
Fulham Electronic Co. Ltd. (North China)
No. 9 Xingchang Road, Nanshaozhen
Changping Science Park
Beijing 102200
P.R. China
Tel : +86-10-6073-5858
Fax : +86-10-6073-3765
[email protected]
Fulham Electronic Co. Ltd. (South China)
Room 1402, Block D, The First Place
Wealth Centre
No. 200 Hongfu Road
The South Dongguan City,
Guangdong Province
P.R. China
Tel: +0769-2202 7555
Fax: +0769-2202 7553
[email protected]
Fulham Electronic Co. Ltd. (Central China)
Room 312-315, Xing Yuan
Technology Plaza
No 418, Gui Ping Road
Caohe-Jing Hi-Tech Park
Shanghai, P.R. China
Post Code: 200233
Tel: +86-021-6495-2777
Fax: +86-021-5426-5271
[email protected]
Fulham Company Ltd. (Middle East)
LOB-2, No 127 P.O. Box 261051
Jebel Ali Free Zone, Dubai, UAE
Tel: +9714-8873577
Fax: +9714-8873599
[email protected]
Fulham (India) Pvt. Ltd.
343, Kaliandas Udyog Bhavan
Sadanand Tandel Marg
Near Century Bazar, Prabhadevi
Mumbai - 400025
Tel: +91 22 66388775-9
[email protected]
[email protected]
Fulham (India) Pvt. Ltd.
Survey No. 26-3
Village Narhe
Taluka Haveli,
District: Pune 411041
Tel: +91 20 24690703/4
Fax: +91 20 24690712
[email protected]
[email protected]
Fulham Co., Inc. (Canada)
24 Kicking Horse Way
Port Moody, BC, Canada, V3H 0G5
Tel: (604) 288-2609
Fax: (604) 648-9065
[email protected]
www.fulham.com/chinese