Contractor Pocket Reference

Transcription

CONTRACTOR POCKET
Reference
Volume 4
Enclosures • Wireway • Trough
Information at your fingertips
hoffmanonline.com
The comprehensive Hoffman brand Web site not only offers the industry’s largest
line of enclosures and accessories, but is also the most complete information
resource for enclosure education and specification:
▶ Complete online catalog featuring over 10,000 standard products
▶ Product selection and configuration tools
▶ Component, 2D and 3D drawing downloads
▶ Technical resources, specification sheets, instructions and more
▶ Thermal management, chemical resistance and hazardous location data
The Hoffman Brand Provides Equipment Protection
Solutions for a Wide Variety of Industries
Pentair Technical Products’ Hoffman brand is recognized as an industry leader
providing a broad range of standard, modified and engineered enclosure
solutions, and extensive technical expertise.
The Commercial Construction Market
Off-the-Shelf Innovation Saves Commercial and HVAC Contractors
Time and Money
Pentair Technical Products has what you need for every application—Hoffman
junction boxes, weatherproof outdoor enclosures, basic panel enclosures,
wireway and trough. New product introductions include additional current
transformer cabinets, drive cabinets, cable supports and accessories, and wire
mesh cable tray products. Rely on Hoffman for
innovative, feature-rich standard
products that save you
time and money.
Subject to change without notice
PH 763 422 2211 • hoffmanonline.com © 2010 Pentair Technical Products
2
Product Selection Quick Reference
Small
Enclosures
Type 1
Type 3R
Medium
Enclosures
Large
Enclosures
Wireway and
Trough
2-12, 14-16
17, 34
18
40-51, 54, 56-59
19-29
30, 32, 38
36
52, 55, 60
Table of Contents
1. Type 1
Screw-Cover Pull Boxes, Type 1 with Knockouts.................................................................... 2
Screw-Cover Pull Boxes, Type 1 without Knockouts.............................................................. 5
Screw-Cover Pull Boxes, Type 1, Accessories..................................................................... 9
Flush-Mount Door Frames.................................................................................................. 9
Flush Covers.............................................................................................................................. 9
Type 1 Locking Window Pull Box Accessory.............................................................. 10
Locking Integrated Perforated Panel Enclosure, Type 1............................................. 11
Type 1 Pull Box Perforated Panel.......................................................................................... 12
T1FLO ® Vented Enclosure with Fan, Type 1...................................................................... 13
Hinged-Cover Cutout Boxes, Type 1................................................................................... 14
Hinged-Cover Small, Type 1................................................................................................... 16
Hinged-Cover Medium, Type 1............................................................................................. 17
Hinged-Cover Large, Type 1................................................................................................... 18
2. Type 3R
WEATHERFLO ® with Fan, Type 3R........................................................................................ 19
Horizontal-Mount, Type 3R.....................................................................................................20
Screw-Cover, Type 3R with Knockouts..................................................................................... 21
Screw-Cover, Type 3R without Knockouts............................................................................... 24
Screw-Cover Galvanized, Type 3R........................................................................................26
Screw-Cover Gasketed, Type 3R...........................................................................................28
Hinged-Cover Small, Type 3R.................................................................................................29
Hinged-Cover Medium, Type 3R...........................................................................................30
Hinged-Cover Lift-Off, Type 3R............................................................................................. 31
WEATHERPRO ® Outdoor Pad-Mount, Type 3R............................................................... 32
3. Telephone Cabinets
Telephone Cabinet, Type 1.....................................................................................................34
T3-Box Telephone Cabinet, Type 3R...................................................................................36
4. Terminal Boxes
Terminal Box, Type 3R...............................................................................................................38
Terminal Box, Type 3R, Accessories..................................................................................... 39
5. Lay-In Wireway and Wiring Trough
Lay-In Galvanized Wireway, NEMA Type 1........................................................................40
Lay-In Painted Flat-Cover Wireway, NEMA Type 1.........................................................44
Lay-In Hinged-Cover Wireway, NEMA Type 1..................................................................48
Lay-In Wireway, NEMA Type 3R............................................................................................. 52
Wiring Trough, NEMA Type 1.................................................................................................54
Wiring Trough, NEMA Type 3R............................................................................................... 55
CLEAN TRAY® Stainless Steel Cable Tray, Type 1............................................................56
EconoTrough, NEMA Type 3R.................................................................................................60
Technical Information Table of Contents...................................................... 61
1
Bulletin
A90P1
Screw-Cover Pull Boxes, Type 1
Industry Standards
UL 50, 50E Listed; Type 1;
File No. E27525
cUL Listed per CSA C22.2 No 40;
Type 1; File No. E27525
NEMA/EEMAC Type 1
IEC 60529, IP30
{
Reading Catalog Numbers
E = Painted
ASE 10
G = Galvanized
H
X
8
W
X
6
D
With Knockouts
Catalog Number
ASE4X4X3
ASG4X4X3
ASE6X6X3
ASG6X6X3
ASE8X6X3
ASG8X6X3
ASE16X14X3
ASE18X14X3
ASE4X4X4
ASG4X4X4
ASE6X4X4
ASG6X4X4
2
Number of
Cover Screws
Knockout Pattern along
“H” Sides
“W” Sides
2
B-C
B-C
2
B-C
B-C
2
B-C-D
B-C-D
2
B-C-D
B-C-D
2
F-G-H-I
B-C-D
2
F-G-H-I
B-C-D
4
B-C-D-E-F-G-H
B-C-D-E-F-G-H
4
A-B-C-D-E-F-G-H-I
B-C-D-E-F-G-H
2
B-C
B-C
2
B-C
B-C
2
B-C-D
B-C
2
B-C-D
B-C
Bulletin
A90P1
With Knockouts (Cont.)
Catalog Number
ASE6X6X4
ASG6X6X4
ASE8X6X4
ASG8X6X4
ASE8X8X4
ASG8X8X4
ASE10X8X4
ASG10X8X4
ASE10X10X4
ASG10X10X4
ASE12X8X4
ASG12X8X4
ASE12X10X4
ASG12X10X4
ASE12X12X4
ASG12X12X4
ASE16X12X4
ASG16X12X4
ASE18X12X4
ASG18X12X4
ASE18X18X4
ASG18X18X4
ASE24X12X4
ASE24X24X4
ASG24X24X4
ASE30X24X4
ASE6X6X6
ASG6X6X6
ASE8X6X6
Number of
Cover Screws
“H” Sides
“W” Sides
2
B-C-D
B-C-D
2
B-C-D
B-C-D
2
F-G-H-I
B-C-D
2
F-G-H-I
B-C-D
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
C-D-E-F-G
4
F-G-H-I
C-D-E-F-G
4
C-D-E-F-G
F-G-H-I
4
C-D-E-F-G
F-G-H-I
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
B-C-D-E-F-G-H
C-D-E-F-G
4
B-C-D-E-F-G-H
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
2
B-C-D
B-C-D
2
B-C-D
B-C-D
2
F-G-H-I
B-C-D
1
3
Bulletin
A90P1
Catalog Number
ASE8X8X6
ASG8X8X6
ASE10X8X6
ASG10X8X6
ASE10X10X6
ASG10X10X6
ASE12X10X6
ASG12X10X6
ASE12X12X6
ASG12X12X6
ASE16X12X6
ASG16X12X6
ASE16X16X6
ASG16X16X6
ASE18X12X6
ASG18X12X6
ASE18X18X6
ASG18X18X6
ASE24X18X6
ASG24X18X6
ASE24X24X6
ASG24X24X6
ASE30X24X6
ASG30X24X6
ASE36X24X6
ASE8X8X8
ASE12X12X8
ASG12X12X8
4
Number of
Cover Screws
“H” Sides
“W” Sides
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
F-G-H-I
4
F-G-H-I
C-D-E-F-G
4
F-G-H-I
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
4
B-C-D-E-F-G-H
C-D-E-F-G
4
B-C-D-E-F-G-H
C-D-E-F-G
4
B-C-D-E-F-G-H
B-C-D-E-F-G-H
4
B-C-D-E-F-G-H
B-C-D-E-F-G-H
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
F-G-H-I
F-G-H-I
4
C-D-E-F-G
C-D-E-F-G
4
C-D-E-F-G
C-D-E-F-G
Bulletin
A90P1
Catalog Number
ASE16X12X8
ASE18X12X8
ASE24X12X8
ASE24X18X8
ASE24X24X8
ASE36X24X8
ASE18X12X10
ASE18X18X10
ASE24X18X10
ASE24X24X10
ASE36X24X10
ASE24X12X12
ASE18X18X12
ASE24X18X12
ASE24X24X12
ASE30X24X12
ASE36X24X12
Number of
Cover Screws
“H” Sides
“W” Sides
4
B-C-D-E-F-G-H
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
C-D-E-F-G
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
4
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
6
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
1
Without Knockouts
Catalog Number
ASE4X4X3NK
ASG4X4X3NK
ASE6X6X3NK
ASG6X6X3NK
ASE8X6X3NK
Number of
Cover Screws
2
2
2
2
2
Catalog Number
ASG8X6X3NK
ASE16X14X3NK
ASE20X14X3NK
ASE4X4X4NK
ASG4X4X4NK
Number of
Cover Screws
2
4
4
2
2
5
Bulletin
A90P1
Without Knockouts (Cont.)
Catalog Number
ASE6X4X4NK
ASG6X4X4NK
ASE6X6X4NK
ASG6X6X4NK
ASE8X6X4NK
ASG8X6X4NK
ASE8X8X4NK
ASG8X8X4NK
ASE10X6X4NK
ASG10X6X4NK
ASE10X8X4NK
ASG10X8X4NK
ASE10X10X4NK
ASG10X10X4NK
ASE12X6X4NK
ASG12X6X4NK
ASE12X8X4NK
ASG12X8X4NK
ASE12X10X4NK
ASG12X10X4NK
ASE12X12X4NK
ASG12X12X4NK
ASE15X15X4NK
ASG15X15X4NK
ASE16X12X4NK
ASG16X12X4NK
ASE18X12X4NK
ASG18X12X4NK
ASE18X15X4NK
6
Number of
Cover Screws
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Catalog Number
ASE18X18X4NK
ASG18X18X4NK
ASE24X12X4NK
ASE24X18X4NK
ASG24X18X4NK
ASE24X24X4NK
ASG24X24X4NK
ASE30X24X4NK
ASE30X30X4NK
ASE6X6X6NK
ASG6X6X6NK
ASE8X6X6NK
ASG8X6X6NK
ASE8X8X6NK
ASG8X8X6NK
ASE10X8X6NK
ASG10X8X6NK
ASE10X10X6NK
ASG10X10X6NK
ASE12X6X6NK
ASE12X8X6NK
ASG12X8X6NK
ASE12X10X6NK
ASG12X10X6NK
ASE12X12X6NK
ASG12X12X6NK
ASE16X12X6NK
ASG16X12X6NK
ASE16X16X6NK
Number of
Cover Screws
4
4
4
4
4
4
4
6
8
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Bulletin
A90P1
Catalog Number
ASG16X16X6NK
ASE18X12X6NK
ASG18X12X6NK
ASE18X18X6NK
ASG18X18X6NK
ASE24X12X6NK
ASG24X12X6NK
ASE24X18X6NK
ASG24X18X6NK
ASE24X20X6NK
ASG24X20X6NK
ASE24X24X6NK
ASG24X24X6NK
ASE30X24X6NK
ASG30X24X6NK
ASE30X30X6NK
ASG30X30X6NK
ASE36X24X6NK
ASG36X24X6NK
ASE36X30X6NK
ASE36X36X6NK
ASG36X36X6NK
ASE8X8X8NK
ASG8X8X8NK
ASE10X10X8NK
ASG10X10X8NK
ASE12X10X8NK
ASE12X12X8NK
ASG12X12X8NK
Number of
Cover Screws
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
8
8
6
6
8
8
8
4
4
4
4
4
4
4
Catalog Number
ASE16X12X8NK
ASE18X12X8NK
ASG18X12X8NK
ASE18X18X8NK
ASG18X18X8NK
ASE24X12X8NK
ASG24X12X8NK
ASE24X18X8NK
ASG24X18X8NK
ASE24X20X8NK
ASG24X20X8NK
ASE24X24X8NK
ASG24X24X8NK
ASE30X24X8NK
ASG30X24X8NK
ASE30X30X8NK
ASG30X30X8NK
ASE36X24X8NK
ASG36X24X8NK
ASE36X36X8NK
ASG36X36X8NK
ASE12X12X10NK
ASG12X12X10NK
ASE18X12X10NK
ASE18X18X10NK
ASG18X18X10NK
ASE24X12X10NK
ASE24X18X10NK
ASE24X24X10NK
Number of
Cover Screws
1
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
8
6
6
6
8
8
4
4
4
4
4
4
4
4
7
Bulletin
A90P1
Screw-Cover Pull Box,
Type
1, Accessories
Boxes,
Type
1
Catalog Number
ASG24X24X10NK
ASE30X24X10NK
ASE30X30X10NK
ASG30X30X10NK
ASE36X24X10NK
ASG36X24X10NK
ASE36X36X10NK
ASG36X36X10NK
ASE12X12X12NK
ASG12X12X12NK
ASE24X12X12NK
ASG24X12X12NK
ASE18X18X12NK
ASG18X18X12NK
ASE24X18X12NK
ASE24X24X12NK
8
Number of
Cover Screws
4
6
8
8
6
6
8
8
4
4
4
4
4
4
4
Catalog Number
ASG24X24X12NK
ASE30X24X12NK
ASE30X30X12NK
ASG30X30X12NK
ASE36X24X12NK
ASG36X24X12NK
ASE36X36X12NK
ASG36X36X12NK
ASE48X48X12NK
ASG48X48X12NK
ASE30X30X16NK
ASE36X36X16NK
ASG36X36X16NK
ASE48X48X16NK
ASG48X48X16NK
Number of
Cover Screws
4
6
8
8
6
6
8
8
12
12
8
8
8
12
12
4
Bulletin
A90P1
Screw-Cover Pull Boxes,
Type
Box, Type
1, 1Accessories
Flush-Mount Door Frames
Flush Covers
Catalog
Number
Door Size H x W
in. (mm)
Fits Box Size H x W
in. (mm)
AFDF0606P
3.00 x 3.00 (76 x 76)
6.00 x 6.00 (152 x 152)
AFDF1212P
9.00 x 9.00 (229 x 229)
12.00 x 12.00 (305 x 305)
AFDF1812P
15.00 x 9.00 (381 x 229)
18.00 x 12.00 (457 x 305)
AFDF1818P
15.00 x 15.00 (381 x 381)
18.00 x 18.00 (457 x 457)
AFDF2418P
21.00 x 15.00 (533 x 381)
24.00 x 18.00 (610 x 457)
AFDF2424P
21.00 x 21.00 (533 x 533)
24.00 x 24.00 (610 x 610)
AFDF3024P
27.00 x 21.00 (686 x 533)
30.00 x 24.00 (762 x 610)
Catalog
Number
Fits Box Size H x W
in. (mm)
AFE6X6
AFE8X6
AFE8X8
AFE10X8
AFE12X8
AFE10X10
AFE12X12
AFE18X12
AFE18X18
AFE24X18
AFE24X24
6.00 x 6.00 (152 x 152)
1
8.00 x 6.00 (203 x 152)
8.00 x 8.00 (203 x 203)
10.00 x 8.00 (254 x 203)
12.00 x 8.00 (305 x 203)
10.00 x 10.00 (254 x 254)
12.00 x 12.00 (305 x 305)
18.00 x 12.00 (457 x 305)
18.00 x 18.00 (457 x 457)
24.00 x 18.00 (610 x 457)
24.00 x 24.00 (610 x 610)
9
Bulletin
A90P1
Boxes,
Type
1
Screw-Cover Pull Box,
Type
1, Accessories
Type 1 Locking Window Pull Box Accessory
Catalog
Number
Frame Size H x W
in. (mm)
9.00 x 9.00 (229 x 293)
ALDF88W
ALDF1212W 13.00 x 13.00 (330 x 330)
10
Dead Front Panel Size H x W
in. (mm)
6.00 x 6.14 (152 x 99)
10.00 x 10.14 (254 x 200)
Bulletin
A90P1
Locking Integrated
Perforated
Screw-Cover
Pull Boxes,
Type 1 Panel
Enclosure, Type 1
1
Industry Standards
UL 50, 50E Listed; Type 1; File No. E27567
cUL Listed per CSA C22.2 No 40; Type 1;
File No. E27567
NEMA/EEMAC Type 1
IEC 60529, IP30
A
12 12
H W
Catalog
Number
A12126T1PP
A16126T1PP
A2016AT1PP
A2420AT1PP
A3624AT1PP
A3630AT1PP
6
D
T1 PP
Panel Size D x E
in. (mm)
Mounting Holes G x H Knockout Pattern Knockout Pattern
B-Sides
in. (mm)
A-Sides
10.25 x 10.25 (260 x 260)
14.25 x 10.25 (362 x 260)
17.00 x 14.50 (432 x 368)
21.00 x 18.50 (533 x 470)
32.00 x 22.50 (813 x 572)
32.00 x 31.50 (813 x 800)
9.00 x 11.00 (229 x 279)
13.00 x 11.00 (330 x 279)
17.88 x 11.00 (454 x 279)
21.88 x 15.00 (556 x 381)
33.50 x 16.75 (851 x 425)
33.50 x 22.75 (851 x 578)
C-D-E-F-G
B-C-D-E-F-G-H
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
—
—
C-D-E-F-G
C-D-E-F-G
B-C-D-E-F-G-H
A-B-C-D-E-F-G-H-I
—
—
11
Bulletin
PNLP
A90P1
Type 1 Pull Box
Perforated
Panel
Screw-Cover
Pull
Boxes, Type
1
Panel mounts with
pull box mounting
means
Attach to pull box at bonding
emboss to hold panel in
place temporarily until box is
mounted
Panel grounding hole to terminate
equipment grounding conductor
Catalog
Number
Panel
Gauge
Panel Size
D x E (in.)
Panel Size
D x E (mm)
PB66PP
PB88PP
PB1212PP
PB1818PP
PB2424PP
16
4.40 x 5.50
112 x 140
16
6.40 x 7.50
163 x 191
16
10.40 x 11.50
264 x 292
16
16.40 x 17.50
417 x 445
16
22.40 x 23.50
569 x 597
Fits Pull Box
Fits Hinged Cover
Cutout Box
ASE6X6X__
ASE8X8X__
ASE12X12X__
ASE18X18X__
ASE24X24X__
AHE6X6X__
AHE8X8X__
AHE12X12X__
AHE18X18X__
AHE14X14X__
PB1818PP and PB2424PP have flange on all four sides.
12
Bulletin
A90P1
Screw-Cover
Pull
Boxes, Type
T1FLO® Vented
Enclosure
with1Fan, Type 1
1
Industry Standards
UL 508A Listed; Type 1; File No. E61997
cUL Listed per CSA C22.2 No. 94; Type 1;
File No. E61997
NEMA/EEMAC Type 1
IEC 60529, IP20
Catalog Number
T1F80LP
T1F130LP
T1F200LP
T1F350LP
AxBxC in. (mm)
Suggested HP
28.00 x 24.00 x 12.75
(711 x 610 x 324)
34.00 x 24.00 x 12.75
(864 x 610 x 324)
40.00 x 24.00 x 12.75
(1016 x 610 x 324)
54.00 x 30.00 x 12.75
(1372 x 762 x 324)
3
A24P24
Solid Panel
A24P24PP
Up to 20
A30P24
A30P24PP
40
A36P24
A36P24PP
Up to 75
A48P30
—
Perforated Panel
13
Bulletin
A90P1
Hinged-Cover Cutout Boxes
Industry Standards
File No. E27567
NEMA/EEMAC Type 1
CSA, File 42184: Type 1
IEC 60529, IP30
AHE 10
H
X
8
W
X
6
D
Hinged-Cover, Type 1
Catalog Number
AHE6X4X4
AHE6X6X4
AHE8X6X4
AHE8X8X4
AHE10X8X4
AHE10X10X4
AHE12X8X4
AHE12X10X4
AHE12X12X4
AHE16X12X4
AHE18X12X4
14
“H” Sides
“W” Sides
B-C-D
B-C
B-C-D
B-C-D
F-G-H-I
B-C-D
F-G-H-I
F-G-H-I
F-G-H-I
F-G-H-I
F-G-H-I
C-D-E-F-G
C-D-E-F-G
F-G-H-I
C-D-E-F-G
C-D-E-F-G
C-D-E-F-G
C-D-E-F-G
B-C-D-E-F-G-H
C-D-E-F-G
A-B-C-D-E-F-G-H-I
C-D-E-F-G
Bulletin
A90P1
Hinged-Cover Cutout Boxes
Hinged-Cover, Type 1 (Cont.)
Catalog Number
AHE6X6X6
AHE8X8X6
AHE10X8X6
AHE10X10X6
AHE12X10X6
AHE12X12X6
AHE16X12X6
AHE16X16X6
AHE18X12X6
AHE18X18X6
AHE24X18X6
AHE24X24X6
AHE30X24X6
AHE36X24X6
AHE36X24X8
“H” Sides
“W” Sides
B-C-D
B-C-D
F-G-H-I
F-G-H-I
F-G-H-I
F-G-H-I
F-G-H-I
C-D-E-F-G
C-D-E-F-G
C-D-E-F-G
C-D-E-F-G
C-D-E-F-G
B-C-D-E-F-G-H
C-D-E-F-G
B-C-D-E-F-G-H
B-C-D-E-F-G-H
A-B-C-D-E-F-G-H-I
C-D-E-F-G
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
A-B-C-D-E-F-G-H-I
1
15
Bulletin
a1sm
Industry Standards
File No. E27567
NEMA/EEMAC Type 1
IEC 60529, IP30
A
10
H
N 10
W
4
D
Small, Type 1
a
Catalog
Number
Panela
Perforated
Panela
Catalog
Number
Panela
Perforated
Panela
A6N64
A8N64
A8N84
A10N84
A10N104
A12N104
A12N124
A14N124
A8N66
A8N86
A6N6P
A8N6P
A8N8P
A10N8P
A10N10P
A12N10P
A12N12P
A14N12P
A8N6P
A8N8P
A6N6PP
A8N6PP
A8N8PP
A10N8PP
A10N10PP
A12N10PP
A12N12PP
A14N12PP
A8N6PP
A8N8PP
A10N86
A10N106
A10N8P
A10N10P
A10N8PP
A10N10PP
A12N106
A12N126
A14N126
A16N126
A20N126
A12N128
A14N128
A12N10P
A12N12P
A14N12P
A16N12P
A20N12P
A12N12P
A14N12P
A12N10PP
A12N12PP
A14N12PP
A16N12PP
A20N12PP
A12N12PP
A14N12PP
Purchase panels separately.
16
Bulletin
a1m
Industry Standards
File No. E27567
NEMA/EEMAC Type 1
IEC 60529, IP30
16
H
N 12
W
ALP
D
{
A
A = 6.62 in.
B = 8.62 in.
C = 10.62 in.
D = 12.62 in.
Medium, Type 1
Catalog
Number
Panel
Cataloga
Perforated
Panela
Catalog
Number
Panel
Cataloga
Perforated
Panela
A16N12ALP
A16N16ALP
A16N20ALP
A20N16ALP
A20N20ALP
A24N16ALP
A24N20ALP
A24N24ALP
A30N24ALP
A36N24ALP
A36N30ALP
A16N12BLP
A20N12BLP
A20N16BLP
A16N12MP
A16N16MP
A16N20MP
A20N16MP
A20N20MP
A24N16MP
A24N20MP
A24N24MP
A30N24MP
A36N24MP
A36N30MP
A16N12MP
A20N12MP
A20N16MP
A16N12MPP
A16N16MPP
A16N20MPP
A20N16MPP
A20N20MPP
A24N16MPP
A24N20MPP
A24N24MPP*
A30N24MPP*
A36N24MPP*
A36N30MPP*
A16N12MPP
A20N12MPP
A20N16MPP
A20N20BLP
A24N20BLP
A24N24BLP
A30N20BLP
A30N24BLP
A30N30BLP
A36N24BLP
A36N30BLP
A18N18CLP
A24N20CLP
A30N24CLP
A24N24DLP
A30N24DLP
A36N30DLP
A20N20MP
A24N20MP
A24N24MP
A30N20MP
A30N24MP
A30N30MP
A36N24MP
A36N30MP
A18N18MP
A24N20MP
A30N24MP
A24N24MP
A30N24MP
A36N30MP
A20N20MPP
A24N20MPP
A24N24MPP*
A30N20MPP*
A30N24MPP*
A30N30MPP*
A36N24MPP*
A36N30MPP*
A18N18MPP
A24N20MPP
A30N24MPP
A24N24MPP*
A30N24MPP*
A36N30MPP*
a
*Flanged on all four sides.
17
1
Bulletin
A1L
Industry Standards
File No. E27567
NEMA/EEMAC Type 1
IEC 60529, IP30
Large, Type 1
Catalog Number
Panela
A42N3009
A42N3609
A48N3609
A48N3611
A42N3013
A42N3613
A48N3613
A48N3617
A42P30
A42P36
A48P36
A48P36
A42P30
A42P36
A48P36
A48P36
A
42
H
N 30 09
W D
Purchase panels separately. Optional aluminum
panels are available for most sizes.
a
Purchase enclosure Mounting Bracket Kit accessory
(AMFLN1) separately.
18
Bulletin
A3RD
WEATHERFLO® with Fan, Type 3R
2
Industry Standards
UL 508A Listed; Type 3R; File Number E61997
cUL Listed per CSA C22.2 No 94; Type 3R; File Number E61997
NEMA/EEMAC Type 3R
IEC 60529, IP32
Catalog Number
WF3LP
WF10LP
WF25LP
WF40LP
WF75LP
WF100LP
a
Enclosure Size H x W x D
in. (mm)
29.00 x 24.00 x 12.00
(737 x 610 x 305)
35.00 x 24.00 x 12.00
(889 x 610 x 305)
41.00 x 24.00 x 12.00
(1041 x 610 x 305)
47.00 x 24.00 x 14.00
(1194 x 610 x 356)
55.00 x 36.00 x 16.00
(1397 x 914 x 406)
67.00 x 36.00 x 16.00
(1702 x 914 x 706)
Panela
System CFM
A24P24
75
A30P24
160
A36P24
160
A42P24
200
A48P36
400
A60P36
500
19
Bulletin
a90rh
Horizontal-Mount, Type 3R
A
12
H
R
Catalog Number
A8R84HM
A10R104HM
A12R126HM
A24R206HM
20
12
W
6
D
Industry Standards
Maintains Type 3R rating when mounted
horizontally. Maintains Type 1 rating when
mounted vertically.
UL 50, 50E Listed; Type 3R;
File No. E27525
Type 3R; File No. E27525
NEMA/EEMAC Type 3R
IEC 60529, IP32
Bulletin
a90s3
Screw-Cover, Type 3R
Industry Standards
File No. E27525
NEMA/EEMAC Type 3R
IEC 60529, IP32
2
A
12
H
R
10
W
4
D
With Knockouts
Catalog Number
Body Style
Knockout Pattern
A4R44
A6R44
A12R44
A6R64
A8R64
A8R84
A10R84
A12R84
A10R104
A12R104
A12R124
A18R124
A18R184
A
B-C
A
B-C
A
B-C
A
B-C-D
A
B-C-D
A
F-G-H-I
A
F-G-H-I
A
F-G-H-I
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
B
A-B-C-D-E-F-G-H-I
21
Bulletin
a90s3
a90rh
Screw-Cover,
Type 3R
Horizontal-Mount,
Type 3R
Catalog Number
Body Style
Knockout Pattern
A6R66
A8R86
A10R86
A10R106
A12R86
A12R106
A12R126
A15R126
A16R126
A18R126
A18R186
A24R126
A24R186
A24R246
A8R88
A12R128
A15R128
A18R128
A24R168
A18R188
A24R188
A24R208
A24R248
A30R248
A48R368
A18R1810
A24R1810
A24R2410
A30R2410
A
B-C-D
A
F-G-H-I
A
F-G-H-I
A
C-D-E-F-G
A
F-G-H-I
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
B
A-B-C-D-E-F-G-H-I
B
C-D-E-F-G
B
A-B-C-D-E-F-G-H-I
B
A-B-C-D-E-F-G-H-I
A
F-G-H-I
A
C-D-E-F-G
A
C-D-E-F-G
A
C-D-E-F-G
B
C-D-E-F-G
B
A-B-C-D-E-F-G-H-I
B
A-B-C-D-E-F-G-H-I
B
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
B
B
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
22
A-B-C-D-E-F-G-H-I
Bulletin
a90s3
Catalog Number
Body Style
A24R2412
A30R3012
A36R3012
A36R3612
A30R3016
A48R3616
C
Knockout Pattern
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
2
23
Bulletin
a90s3
Industry Standards
File No. E27525
NEMA/EEMAC Type 3R
IEC 60529, IP32
A
12
H
Without Knockouts
R
12
W
Catalog Number
Body Style
Catalog Number
Body Style
A4R44NK
A6R64NK
A8R64NK
A8R84NK
A10R84NK
A12R84NK
A10R104NK
A12R104NK
A12R124NK
A18R184NK
A6R66NK
A18R66NK
A8R86NK
A10R86NK
A10R106NK
A12R106NK
A12R126NK
A15R126NK
A16R126NK
A18R126NK
A
A18R186NK
A24R186NK
A24R246NK
A8R88NK
A24R88NK
A12R128NK
A15R128NK
A18R128NK
A18R188NK
A24R188NK
A24R208NK
A24R248NK
A30R248NK
A48R368NK
A24R2410NK
A24R2412NK
A30R3012NK
A36R3012NK
A36R3612NK
A30R3016NK
A48R3616NK
B
24
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
4
D
NK
B
B
A
A
A
A
A
B
B
B
C
C
C
C
C
C
C
C
C
C
Bulletin
a90s3
Body Style A
2
Body Style B
Body Style C
25
Bulletin
A90g3
Screw-Cover Galvanized, Type 3R
Industry Standards
UL50, 50E Listed; Type 3R; File No. E27525
cUL Listed per CSA C22.2 No 94; Type 3R;
File No. E27525
NEMA/EEMAC Type 3R
IEC 60529, IP32
A
12
H
R
12
W
4
D
GV
Catalog Number
Body Style
Knockout Pattern
A4R44GV
A6R64GV
A8R84GV
A10R104GV
A12R124GV
A6R66GV
A8R86GV
A10R106GV
A12R126GV
A18R186GV
A8R88GV
A8R88GVNK
A10R108GVNK
A12R128GV
A24R248GV
A24R2410GV
A
B-C
A
B-C
A
B-C-D
A
C-D-E-F-G
A
C-D-E-F-G
A
B-C-D
A
F-G-H-I
A
C-D-E-F-G
A
C-D-E-F-G
B
A-B-C-D-E-F-G-H-I
A
F-G-H-I
A
—
A
—
A
C-D-E-F-G
C
A-B-C-D-E-F-G-H-I
C
A-B-C-D-E-F-G-H-I
26
Bulletin
A90g3
Screw-Cover Galvanized, Type 3R
Body Style A
2
Body Style B
Body Style C
27
Bulletin
a90gs
Screw-Cover Gasketed, Type 3
Industry Standards
UL 508A Listed; Type 3, 12;
File No. E61997
Type 3, 12; File No. E61997
NEMA/EEMAC Type 3 and 12 (except for
mounting provisions)
CSA, File 42184: Type 4 and 12
IEC 60529, IP66
A
6
H
6
W
4
D
GSC
Catalog Number
Catalog Number
A664GSC
A864GSC
A884GSC
A1084GSC
A10104GSC
A12124GSC
A666GSC
A886GSC
A888GSC
A10108GSC
A12128GSC
A16168GSC
A20208GSC
A24208GSC
A24248GSC
A30248GSC
A242410GSC
A121212GSC
A161612GSC
A202012GSC
A242412GSC
A303012GSC
A363612GSC
A10106GSC
A12106GSC
A12126GSC
A16126GSC
A16166GSC
A18186GSC
A20166GSC
A24246GSC
28
Bulletin
a3sm
Hinged-Cover Small , Type 3R
Industry Standards
File No. E27567
Type 3R File No. E27567
NEMA/EEMAC Type 3R
IEC 60529, IP32
2
A
Catalog
Number
A6R44HCR
A6R64HCR
A8R64HCR
A8R86HCR
A10R86HCR
A12R106HCR
A12R126HCR
A12R1210HCR
a
A6N4P
Perforated
Panela
—
A6N6P
A6N6PP
A8N6P
A8N6PP
A8N8P
A8N8PP
A10N8P
A10N8PP
A12N10P
A12N10PP
A12N12P
A12N12PP
A12N12P
A12N12PP
Panela
6
H
R
6
W
4
D
HCR
29
Bulletin
a3m
Hinged-Cover Medium, Type 3R
Industry Standards
File No. E27567
NEMA/EEMAC Type 3R
IEC 60529, IP32
A
16
H
Catalog
Number
R
12
W
6
D
HCR
Panela
Perforated
Panela
Catalog
Number
A16R126HCR
A16R166HCR
A18R186HCR
A20R166HCR
A20R208HCR
A24R208HCR
A24R248HCR
A30R248HCR
A30R308HCR
A18R1810HCR
A24R2410HCR
A30R2410HCR
A16P12
A16P12PP
A16P16
A16P16PP
A18P18
A18P18PP
A20P16
A20P16PP
A20P20
A20P20PP
A24P20
A24P24
A24P20PP
A24P24PP*
A30P24
A30P24PP*
A30P30
A30P30PP*
A18P18
A24P24
A18P18PP
A24P24PP*
A30R3012HCR
A36R2412HCR
A36R3012HCR
A36R3612HCR
A42R3012HCR
A42R3612HCR
A48R3612HCR
A60R3612HCR
A30R3016HCR
A48R3616HCR
A30P24
A30P24PP*
A36R3610HCR
A36P36
A36P36PP*
30
Panela
A30P30
Perforated
Panela
A30P30PP*
A36P24
A36P24PP*
A36P30
A36P30PP*
A36P36
A36P36PP*
A42P30
—
A42P36
—
A48P36
—
A60P36
A30P30
—
A30P30PP*
A48P36
—
*Flanged on all four sides.
a
Bulletin
a3lo
Hinged-Cover Lift-Off, Type 3R
Industry Standards
File No. E27567
NEMA/EEMAC Type 3R
CSA, File 42184: Type 3R
2
IEC 60529, IP32
A
16
H
R
12
W
6
D
HCLO
Catalog Number
Panela
Panel
Mounting Kitb
Mounting
Bracket Kitb
A8R64HCLO
A8R86HCLO
A10R86HCLO
A12R106HCLO
A12R126HCLO
A16R126HCLO
A16R166HCLO
A20R166HCLO
A20R208HCLO
A24R208HCLO
A24R248HCLO
A30R248HCLO
A6P6
A8P6
A8P8
A10P10
A12P10
A14P12
A16P16
A20P16
A20P20
A24P20
A24P24
A30P24
APMK3RLO16
APMK3RLO16
APMK3RLO16
APMK3RLO16
APMK3RLO16
APMK3RLO16
APMK3RLO14
APMK3RLO14
APMK3RLO14
APMK3RLO14
APMK3RLO14
APMK3RLO14
AMFK3RLO16
AMFK3RLO16
APMK3RLO16
AMFK3RLO16
AMFK3RLO16
AMFK3RLO16
AMFK3RLO14
AMFK3RLO14
AMFK3RLO14
AMFK3RLO14
AMFK3RLO14
AMFK3RLO14
Order Panel Mounting Kit and Mounting Bracket Kit separately.
(A Panel Mounting Kit must be ordered to install panel.)
a
b
31
Bulletin
a3m
WEATHERPRO® Outdoor Pad-Mount, Type 3R
Industry Standards
UL 508A Listed; Type 3R; File No. E61997
File No. E61997
NEMA/EEMAC Type 3R
IEC 60529, IP32
A
60
H
R 28 18 FSLP
W D
Single-Door
Catalog Number
Panel
A60R2518FSLP
A60R2524FSLP
A72R2518FSLP
A60R3618FSLP
A72R3618FSLP
A72R3624FSLP
A49P21N
A49P21N
A61P21N
A49P32N
A61P32N
A61P32N
32
Bulletin
a3lo
WEATHERPRO® Outdoor Pad-Mount, Type 3R
Industry Standards
UL 508A Listed; Type 3R; File No. E61997
File No. E61997
NEMA/EEMAC Type 3R
IEC 60529, IP32
2
A
60
H
R 52 18 FSLP
W D
Two-Door
Catalog Number
Panel
A60R5218FSLP
A60R5224FSLP
A60R7224FSLP
A72R7218FSLP
A72R7224FSLP
A49P48N
A49P48N
A49P68N
A61P68N
A61P68N
33
Bulletin
t90
Telephone Cabinet, Type 1
Industry Standards
File No. E27567
NEMA/EEMAC Type 1
IEC 60529, IP30
Catalog
Number
ATC10104S
ATC10104F
ATC12124S
ATC12124F
ATC18124S
ATC18124F
ATC18184S
ATC18184F
ATC24184S
ATC24184F
ATC24244S
ATC24244F
Mounted
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Catalog
Number
ATC30244S
ATC30244F
ATC30304S
ATC36244S
ATC36244F
ATC36364S
ATC36364F
ATC12126S
ATC12126F
ATC18126S
ATC18126F
ATC18186S
Mounted
Surface
Flush
Surface
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
3/4-inch-thick plywood panel
included.
34
Bulletin
t90
Telephone Cabinet, Type 1
12 12
H W
Catalog
Number
ATC18186F
ATC24186S
ATC24186F
ATC24246S
ATC24246F
ATC30246F
ATC30306S
ATC30306F
ATC36246S
ATC36246F
ATC36306S
ATC36306F
ATC36366S
ATC36366F
ATC36308S
ATC36308F
4
D
S
{
ATC
S = Surface
F = Flush
Mounted
3
Flush
Surface
Flush
Surface
Flush
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
Flush
35
Bulletin
t90R3
T3-Box Telephone Cabinet, Type 3R
Industry Standards
UL 50, 50E Listed; Type 3R; File No. E27567
UL 497 / 1863 Listed; File No. E230874
File No. E27567
NEMA Type 3R
IEC 60529 IP32
ATC
12
H
R
14
W
5
D
Catalog Number
Door
Conduit Pattern
ATC12R145
ATC36R366
ATC26R248
ATC36R248
ATC36R308
ATC36R369
ATC42R369
ATC48R369
ATC48R489
ATC36R3612
Single
Single
G-H-I
C-D-E-F-G-H-I-J-K-L-M
Single
E-F-G-H-I-J-K
Single
E-F-G-H-I-J-K
Single
D-E-F-G-H-I-J-K-L
Single
Double
Double
Double
Single
A-B-C-D-E-F-G-H-I-J-K-L-M-N-O
3/4-inch-thick plywood panel
included.
36
Bulletin
t90R3
T3-Box Telephone Cabinet, Type 3R
3
37
Bulletin
s90b3
Terminal Box, Type 3R
Industry Standards
UL 1773 Listed; Type 3R;
File No. E256098
File No. E27525
NEMA/EEMAC Type 3R
IEC 60529, IP32
Catalog
Number
TB3R101
TB3R103
TB3R103240
TB3R201
TB3R203
TB3R203240
TB3R401
TB3R403
38
A x B x C in. (mm)
Volts
Amps
Number
of Bars
18.00 x 10.75 x 4.50
(457 x 273 x 114)
18.00 x 10.75 x 4.50
(457 x 273 x 114)
18.00 x 10.75 x 4.50
(457 x 273 x 114)
23.00 x 14.00 x 4.50
(584 x 356 x 114)
23.00 x 14.00 x 4.50
(584 x 356 x 114)
23.00 x 14.00 x 4.50
(584 x 356 x 114)
27.00 x 20.50 x 6.00
(686 x 521 x 152)
27.00 x 20.50 x 6.00
(686 x 521 x 152)
120/240
100
3
600
100
4
120/240
100
4
120/240
200
3
600
200
4
120/240
200
4
120/240
400
3
600
400
4
Bulletin
s90b3
Terminal Box, Type 3R, Accessories
Interchangeable Bolt-On Hub
Catalog
Number
Fits Conduit
Size (in.)
Fits Conduit
Size (mm)
TBHUB10
TBHUB12
TBHUB15
TBHUB20
TBHUB25
1.00
25
1.25
32
1.50
38
2.00
51
2.50
64
Lug Assembly
Catalog Number
Wire Range
TBL100
TBL200
TBL400
(6) #14-2/0
4
(6) #6-350 MCM
(6) #4-600 MCM
39
Bulletin
f40g
Lay-In Galvanized Wireway, NEMA Type 1
Industry Standards
UL 870 Listed; File No. E27524
cUL Listed per CSA C22.2 No. 26;
File No. E27524
NEMA/EEMAC: Type 1
IEC 60529, IP30
Description
12.00-in. (305-mm) Straight Section with knockouts
12.00-in. (305-mm) Straight Section without knockouts
40
2.50 x 2.50 in.
64 x 64 mm
4.00 x 4.00 in.
102 x 102 mm
—
F22T112GV
—
—
F22T124GVWK
F22T124GV
F22T136GVWK
F22T136GVWK
—
F22T148GV
F22T160GVWK
F22T160GV
—
—
F22T1120GVWK
F22T1120GV
F44T112GVWK
F44T112GV
—
F44T118GV
F44T124GVWK
F44T124GV
F44T136GVWK
F44T136GV
F44T148GVWK
F44T148GV
F44T160GVWK
F44T160GV
F44T172GVWK
F44T172GV
F44T1120GVWK
F44T1120GV
Bulletin
f40g
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
12.00 x 12.00 in.
305 x 305 mm
F66T112GVWK
F66T112GV
—
F66T118GV
F66T124GVWK
F66T124GV
F66T136GVWK
F66T136GV
F66T148GVWK
F66T148GV
F66T160GVWK
F66T160GV
F66T172GVWK
F66T172GV
F66T1120GVWK
F66T1120GV
F88T112GVWK
F88T112GV
—
F88T118GV
F88T124GVWK
F88T124GV
F88T136GVWK
F88T136GV
F88T148GVWK
F88T148GV
F88T160GVWK
F88T160GV
F88T172GVWK
F88T172GV
F88T1120GVWK
F88T1120GV
—
F1010T112GV
—
—
—
F1010T124GV
—
F1010T136GV
—
F1010T148GV
—
F1010T160GV
—
F1010T172GV
—
F1010T1120GV
—
F1212T112GV
—
—
—
F1212T124GV
—
F1212T136GV
—
F1212T148GV
—
F1212T160GV
—
—
—
F1212T1120GV
5
41
Bulletin
f40g
F40GF
Description
90° Elbow
90° Elbow Inside Opening
90° Elbow Outside Opening
45° Elbow
Telescope Fitting
Panel Adapter
Closure Plate with knockouts
Closure Plate without knockouts
Reducer
Drop and Bracket Hanger
Support Hanger
Universal U-Connector
42
2.50 x 2.50 in.
64 x 64 mm
4.00 x 4.00 in.
102 x 102 mm
F2290EGV
F2290EINGV
F2290EOUTGV
F2245EGV
F22GAGV
F22GPAGV
F22GCPGV
F22GCPNKGV
—
F4490EGV
F4490EINGV
F4490EOUTGV
F4445EGV
F44GAGV
F44GPAGV
F44GCPGV
F44GCPNKGV
F44G22R
F22GDB
F22GSHGV
F22GUCGV
F44GDB
F44GSHGV
F44GUCGV
Bulletin
f40g
F40GF
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
12.00 x 12.00 in.
305 x 305 mm
F6690EGV
F6690EINGV
F6690EOUTGV
F6645EGV
F66GAGV
F66GPAGV
F66GCPGV
F66GCPNKGV
F66G44R
F8890EGV
F8890EINGV
F8890EOUTGV
F8845EGV
F88GAGV
F88GPAGV
F88GCPGV
F88GCPNKGV
F88G66R
F101090EGV
F101090EINGV
F101090EOUTGV
F101045EGV
F1010GAGV
F1010GPAGV
—
F1010GCPNKGV
F1010G88R
F66GDB
F66GSHGV
F66GUCGV
F88GDB
F88GSHGV
F88GUCGV
F1010GDB
F1010GSHGV
F1010GUCGV
F121290EGV
F121290EINGV
F121290EOUTGV
F121245EGV
F1212GAGV
F1212GPAGV
F1212GCPGV
F1212GCPNKGV
F1212G88R
F1212G1010R
F1212GDB
F1212GSHGV
F1212GUCGV
5
43
Bulletin
f40fc
Lay-In Painted Flat-Cover Wireway, NEMA Type 1
Industry Standards
cUL CSA C22.2 No. 26 Listed;
File No. E27524
NEMA/EEMAC Type 1
IEC 60529
Description
2.50 x 2.50 in.
64 x 64 mm
3.00 x 3.00 in.
76 x 76 mm
F22T112GVPWK
—
F22T112GVP
—
—
—
F22T124GVPWK
—
F22T124GVP
—
F22T136GVPWK
—
F22T136GVP
—
F22T148GVPWK
—
F22T148GVP
—
F22T160GVPWK
—
F22T160GVP
F33T160GVP
—
—
—
—
F22T1120GVPWK
—
F22T1120GVP
F33T1120GVP
44
Bulletin
f40fc
4.00 x 4.00 in.
102 x 102 mm
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
12.00 x 12.00 in.
305 x 305 mm
F44T112GVPWK
F66T112GVPWK
F44T112GVP
F66T112GVP
F88T112GVPWK
—
F1212T112GVPWK
F88T112GVP
F1010T112GVP
F44T118GVP
F1212T112GVP
F66T118GVP
F88T118GVP
—
F1212T118GVPWK
F44T124GVPWK
F66T124GVPWK
F88T124GVPWK
—
F1212T124GVPWK
F44T124GVP
F66T124GVP
F88T124GVP
F1010T124GVP
F1212T124GVP
F44T136GVPWK
F66T136GVPWK
F88T136GVPWK
—
F1212T136GVPWK
F44T136GVP
F66T136GVP
F88T136GVP
F1010T136GVP
F1212T136GVP
F44T148GVPWK
F66T148GVPWK
F88T148GVPWK
—
F1212T148GVPWK
F44T148GVP
F66T148GVP
F88T148GVP
F1010T148GVP
F1212T148GVP
F44T160GVPWK
F66T160GVPWK
F88T160GVPWK
—
F1212T160GVPWK
F44T160GVP
F66T160GVP
F88T160GVP
F1010T160GVP
F1212T160GVP
F44T172GVPWK
F66T172GVPWK
—
—
—
F44T172GVP
F66T172GVP
F88T172GVP
F1010T172GVP
—
F44T1120GVPWK
F66T1120GVPWK
F88T1120GVP
—
—
F44T1120GVP
F66T1120GVP
F88T1120GVP
F1010T1120GVP
F1212T1120GVP
45
5
Bulletin
f40fc
F40PF
Description
90° Flush Tee
Sweep Tee
Cross Fitting
90° Sweep Elbow
90° Elbow-Tee-Cross
90° Elbow
45° Elbow
Telescope Fitting
Open Adapter
Panel Adapter
Reducer
Support Hanger
Barrier Kit, bolt-on
Each barrier 60.00 in. (1524 mm)
46
2.50 x 2.50 in.
64 x 64 mm
3.00 x 3.00 in.
76 x 76 mm
F22GT
F22T
F22X
F22G90SE
F22G90TX
F22G90E
F2290EOUT
F2290EIN
F22G45E
F22GAa
F22GOA
F22GPA
F22GCP
F22GCPNK
—
F33GT
—
—
—
F33G90TX
F33G90E
—
—
F33G45E
—
—
F33GPA
—
F33GCPNK
F33G22R
F22GDB
F22GSH
F22GUC
—
—
—
F33GUC
F33BK60
Bulletin
f40fc
F40PF
4.00 x 4.00 in.
102 x 102 mm
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
12.00 x 12.00 in.
305 x 305 mm
F44GT
F44T
F44X
F44G90SE
F44G90TX
F44G90E
F4490EOUT
F4490EIN
F44G45E
F44GAa
F44GOA
F44GPA
F44GCP
F44GCPNK
F44G22R
F44G33R
F44GDB
F44GSH
F44GUC
F44BK60
F66GT
F66T
F66X
F66G90SE
F66G90TX
F66G90E
F6690EOUT
F6690EIN
F66G45E
F66GAa
F66GOA
F66GPA
F66GCP
F66GCPNK
F66G44R
F88GT
F88T
F88X
F88G90SE
F88G90TX
F88G90E
F8890EOUT
F8890EIN
F88G45E
F88GAa
F88GOA
F88GPA
F88GCP
F88GCPNK
F88G66R
F1010GT
F1010T
F1010X
F1010G90SE
F1010G90TX
F1010G90E
F101090EOUT
F101090EIN
F1010G45E
F1010GAa
F1010GOA
F1010GPA
F1010GCP
F1010GCPNK
F1010G88R
F66GDB
F66GSH
F66GUC
F66BK60
F88GDB
F88GSH
F88GUC
F88BK60
F1010GDB
F1010GSH
F1010GUC
—
F1212GT
F1212T
F1212X
F1212G90SE
F1212G90TX
F1212G90E
F121290EOUT
F121290EIN
F1212G45E
F1212GAa
F1212GOA
F1212GPA
F1212GCP
F1212GCPNK
F1212G88R
F1212G1010R
F1212GDB
F1212GSH
F1212GUC
—
5
47
Bulletin
f40
Lay-In Hinged-Cover Wireway, NEMA Type 1
Industry Standards
File No. E27524
NEMA/EEMAC Type 1
IEC 60529, IP30
Description
2.50 x 2.50 in.
64 x 64 mm
4.00 x 4.00 in.
102 x 102 mm
F22G12WK
F44G12WK
F22G12
F44G12
—
F44G18
F22G24WK
F44G24WK
F22G24
F44G24
F22G36WK
F44G36WK
F22G36
F44G36
F22G48WK
F44G48WK
F22G48
F44G48
F22G60WK
F44G60WK
F22G60
F44G60
—
F44G72WK
—
F44G72
—
F44G96
F22G120WK
F44G120WK
F22G120
F44G120
48
Bulletin
f40
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
Not Hinged
12.00 x 12.00 in.
305 x 305 mm
Hinged
12.00 x 12.00 in.
305 x 305 mm
F66G12WK
—
—
—
—
F66G12
F88G12
F1010G12
F1212G12
F1212G12H
F66G18
F88G18
—
—
—
F66G24WK
—
—
—
—
F66G24
F88G24
F1010G24
F1212G24
F1212G24H
F66G36WK
—
—
—
—
F66G36
F88G36
F1010G36
F1212G36
F1212G36H
F66G48WK
—
—
—
—
F66G48
F88G48
F1010G48
F1212G48
F1212G48H
F66G60WK
—
—
—
—
F66G60
F88G60
F1010G60
F1212G60
F1212G60H
F66G72WK
—
—
—
—
F66G72
F88G72
F1010G72
F1212G72
F1212G72H
F66G96
F88G96
F1010G96
F1212G96
—
F66G120WK
—
—
—
—
F66G120
F88G120
F1010G120
F1212G120
F1212G120H
5
49
Bulletin
f40
F40PF
Description
2.50 x 2.50 in.
64 x 64 mm
4.00 x 4.00 in.
102 x 102 mm
90° Flush Tee
F22GT
F44GT
Sweep Tee
F22T
F44T
Cross Fitting
F22X
F44X
90° Sweep Elbow
F22G90SE
F44G90SE
F22G90TX
F44G90TX
90° Elbow
F22G90E
F44G90E
F2290EOUT
F4490EOUT
F2290EIN
F4490EIN
45° Elbow
F22G45E
F44G45E
Telescope Fitting
F22GAa
F44GAa
Open Adapter
F22GOA
F44GOA
Panel Adapter
F22GPA
F44GPA
F22GCPNK
F44GCPNK
F22GCP
F44GCP
Reducer
—
F44G22R
F22GDB
F44GDB
Support Hanger
F22GSH
F44GSH
F22GUC
F44GUC
Barrier Kit, bolt-on Each barrier 60.00 in. (1524 mm)
—
F44BK60
50
Bulletin
f40
F40PF
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
10.00 x 10.00 in.
254 x 254 mm
Not Hinged
12.00 x 12.00 in.
305 x 305 mm
Hinged
12.00 x 12.00 in.
305 x 305 mm
F66GT
F88GT
F1010GT
F1212GT
F1212GT
F66T
F88T
F1010T
F1212T
F1212T
F66X
F88X
F1010X
F1212X
F1212X
F66G90SE
F88G90SE
F1010G90SE
F1212G90SE
F1212G90SE
F66G90TX
F88G90TX
F1010G90TX
F1212G90TX
F1212G90TX
F66G90E
F88G90E
F1010G90E
F1212G90E
F1212G90E
F6690EOUT
F8890EOUT
F101090EOUT
F121290EOUT
F121290EOUT
F6690EIN
F8890EIN
F101090EIN
F121290EIN
F121290EIN
F66G45E
F88G45E
F1010G45E
F1212G45E
F1212G45E
F66GAa
F88GAa
F1010GAa
F1212GAa
F1212GAa
F66GOA
F88GOA
F1010GOA
F1212GOA
F1212GOA
F66GPA
F88GPA
F1010GPA
F1212GPA
F1212GPA
F66GCPNK
F88GCPNK
F1010GCPNK
F1212GCPNK
F1212GCPNK
F66GCP
F88GCP
F1010GCP
F1212GCP
F1212GCP
F66G44R
F88G66R
F1010G88R
F1212G88R
F1212G1010R
F1212G88R
F1212G1010R
F66GDB
F88GDB
F1010GDB
F1212GDB
F1212GDB
F66GSH
F88GSH
F1010GSH
F1212GSH
F1212GSH
F66GUC
F88GUC
F1010GUC
F1212GUC
F1212GUC
F66BK60
F88BK60
—
—
—
5
51
Bulletin
f30G
Lay-In Wireway, NEMA Type 3R
Industry Standards
UL 870 Listed; File No. E27524; Raintight
NEMA/EEMAC Type 3R
CSA File No. 42184, Type 3R
IEC 60529, IP32
Description
12.00-in. (305-mm) Male Straight Section
52
4.00 x 4.00 in.
102 x 102 mm
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
F44T3R12
F44T3R60
F44T3R120
F66T3R12
F66T3R60
F66T3R120
F88T3R12
F88T3R60
F88T3R120
Bulletin
f30G
Lay-In Wireway, NEMA Type 3R
Description
90° Flush Tee
30° Sweep Elbow
90° Elbow
Panel Adapter
Closure Plate
Reducer
Wall Hanger
4.00 x 4.00 in.
102 x 102 mm
6.00 x 6.00 in.
152 x 152 mm
8.00 x 8.00 in.
203 x 203 mm
F44T3RT
F44T3R30SE
F44T3RTX
F44T3R90E
F44T3RPA
F44T3RCP
—
F44T3RDH
F44T3RWH
F44T3RUC
F66T3RT
F66T3R30SE
F66T3RTX
F66T3R90E
F66T3RPA
F66T3RCP
F66T3R44R
F66T3RDH
F66T3RWH
F66T3RUC
F88T3RT
F88T3R30SE
F88T3RTX
F88T3R90E
F88T3RPA
F88T3RCP
F88T3R66R
F88T3RDH
F88T3RWH
F88T3RUC
5
53
Bulletin
f40t1
Wiring Trough, NEMA Type 1
Industry Standards
File No. E27524
NEMA/EEMAC: Type 1
A
4
H
4 12
W L
IEC 60529, IP30
T1T
Catalog Number
Catalog Number
A4412T1T
A4424T1T
A4436T1T
A4448T1T
A4460T1T
A4472T1T
A4496T1T
A6612T1T
A6624T1T
A6636T1T
A6648T1T
A6660T1T
A6672T1T
A6696T1T
A8824T1T
A8836T1T
A8848T1T
A8860T1T
A8872T1T
A8896T1T
A101048T1T
A121224T1T
A121236T1T
A121248T1T
A121260T1T
A121272T1T
A121296T1T
A1212120T1T
54
Bulletin
f40pt
Wiring Trough, NEMA Type 3R
Industry Standards
UL 870 Listed; File No. E27524;
Raintight
File No. E27524; Raintight
A
4
H
4 12
W L
RT
NEMA/EEMAC Type 3R
IEC 60529, IP32
Catalog Number
Catalog Number
A4412RT
A4418RT
A4424RT
A4436RT
A4448RT
A4460RT
A4472RT
A6612RT
A6618RT
A6624RT
A6636RT
A6648RT
A6660RT
A6672RT
A8812RT
A8824RT
A8836RT
A8848RT
A8860RT
A88116RT
A101024RT
A101036RT
A101048RT
A101060RT
A101096RT
A101072RT
A1010116RT
A121224RT
A121236RT
A121248RT
A121260RT
A121272RT
A121284RT
A121296RT
A1212116RT
A141448RT
A141472RT
A141484RT
A141496RT
A1414116RT
A8872RT
A8896RT
5
55
Bulletin
f23
CLEAN TRAY® Stainless Steel Cable Tray, Type 1
Industry Standards
UL Classified; File No. E263414
This product is classified as to its
suitability as an equipment grounding
conductor only.
NEMA/EEMAC Type 1
Description
10-ft. Straight Section, Standard Cover
10-ft. Straight Section, Perforated
10-ft. Straight Section, 20° Sloped Cover
10-ft. Straight Section, Perforated 20° Sloped Cover
Divider Straight Section
Telescopic Straight Section (18.74 in. to 30.61 in.)
Divider, Telescopic Straight Section
90-Degree Elbows, Front Cover
90-Degree Elbows, Front Cover without Tabs
90-Degree Elbows, Inside Cover
90-Degree Elbows, Outside Cover
90-Degree Elbows, Front Cover Perforated
90-Degree Elbows, Front Cover Sloped Inward
90-Degree Elbows, Front Cover Sloped Inward Perforated
90-Degree Elbows, Perforated without Tabs
90-Degree Elbows, Front Cover Sloped Inward without Tabs
90-Degree Elbows, Front Cover Sloped Outward with Tabs
90-Degree Elbows, Front Cover Sloped Outward without Tabs
90-Degree Elbows, Inside Cover Sloped
90-Degree Elbows, Outside Cover Sloped
45-Degree Elbows, Front Cover
45-Degree Elbows, Inside Cover
56
2.00 x 2.00 in.
51 x 51 mm
4.00 x 4.00 in.
102 x 102 mm
CT22120SS
CT22P120SS
—
—
—
CT22TSS
—
CT22EFC90SS
CT22EFCNT90SS
CT22EIC90SS
CT22EOC90SS
CT22PEFC90SS
—
—
CT22PEFCNT90SS
—
—
—
—
—
CT22EFC45SS
CT22EIC45SS
CT33120SS
CT33P120SS
CTS33120SS
CTS33P120SS
CT33DSS
CT33TSS
CT33TDSPSS
CT33EFC90SS
CT33EFCNT90SS
CT33EIC90SS
CT33EOC90SS
CT33PEFC90SS
CTS33EFC90SS
CTS33PEFC90SS
CT33PEFCNT90SS
—
—
—
—
—
CT33EFC45SS
CT33EIC45SS
Bulletin
f23
4.00 x 4.00 in.
102 x 102 mm
4.00 x 6.00 in.
102 x 152 mm
6.00 x 6.00 in.
152 x 152 mm
CT44120SS
CT44P120SS
CTS44120SS
CTS44P120SS
CT44DSS
CT44TSS
CT44TDSPSS
CT44EFC90SS
CT44EFCNT90SS
CT44EIC90SS
CT44EOC90SS
CT44PEFC90SS
CTS44EFC90SS
CTS44PEFC90SS
CT44PEFCNT90SS
CTS44EFCNT90SS
CTS44EFCO90SS
CTS44EFCONT90SS
CTS44EIC90SS
CTS44EOC90SS
CT44EFC45SS
CT44EIC45SS
CT46120SS
CT46P120SS
CTS46120SS
CTS46P120SS
—
CT46TSS
—
CT46EFC90SS
CT46EFCNT90SS
CT46EIC90SS
CT46EOC90SS
CT46PEFC90SS
CTS46EFC90SS
CTS46PEFC90SS
CT46PEFCNT90SS
CTS46EFCNT90SS
CTS46EFCO90SS
CTS46EFCONT90SS
CTS46EIC90SS
CTS46EOC90SS
CT46EFC45SS
CT46EIC45SS
CT66120SS
CT66P120SS
CTS66120SS
CTS66P120SS
CT66DSS
CT66TSS
CT66TDSPSS
CT66EFC90SS
CT66EFCNT90SS
CT66EIC90SS
CT66EOC90SS
CT66PEFC90SS
CTS66EFC90SS
CTS66PEFC90SS
CT66PEFCNT90SS
CTS66EFCNT90SS
CTS66EFCO90SS
CTS66EFCONT90SS
CTS66EIC90SS
CTS66EOC90SS
CT66EFC45SS
CT66EIC45SS
5
57
Bulletin
f23
Description
45-Degree Elbows, Outside Cover
45-Degree Elbows, Front Cover Perforated
45-Degree Elbows, Front Cover Sloped
45-Degree Elbows, Front Cover Sloped Perforated
45-Degree Elbows, Front Cover Sloped Outward
45-Degree Elbows, Inside Cover Sloped
45-Degree Elbows, Outside Cover Sloped
Variable-Angle Elbow Fitting
90-Degree Tee, Front Cover
90-Degree Tee, Inside Cover
90-Degree Tee, Outside Cover
90-Degree Tee, Front Cover Perforated
90-Degree Tee, Front Cover Sloped
90-Degree Tee, Front Cover Sloped Perforated
90-Degree Tee, Front Cover Sloped Outward
90-Degree Tee, Inside Cover Sloped
90-Degree Tee, Outside Cover Sloped
Divider 90-Degree Tee, Front Cover
Divider 90-Degree Tee, Inside Cover
Divider 90-Degree Tee, Outside Cover
Divider 90-Degree Elbow, Front Cover
Divider 90-Degree Elbow, Inside Cover
Divider 90-Degree Elbow, Outside Cover
Divider 45-Degree Elbow, Front Cover
Divider 45-Degree Elbow, Inside Cover
Divider 45-Degree Elbow, Outside Cover
58
2.00 x 2.00 in.
51 x 51 mm
4.00 x 4.00 in.
102 x 102 mm
CT22EOC45SS
CT22PEFC45SS
—
—
—
—
—
CT22VSS
CT22TFCSS
—
CT22TOCSS
CT22PTFCSS
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CT33EOC45SS
CT33PEFC45SS
CTS33EFC45SS
CTS33PEFC45SS
—
—
—
CT33VSS
CT33TFCSS
CT33TICSS
CT33TOCSS
CT33PTFCSS
CTS33TFCSS
CTS33PTFCSS
—
—
—
CT33DTFCSS
CT33DTICSS
CT33DTOCSS
CT33DEFC90SS
CT33DEIC90SS
CT33DEOC90SS
CT33DEFC45SS
CT33DEIC45SS
CT33DEOC45SS
Bulletin
f23
4.00 x 4.00 in.
102 x 102 mm
4.00 x 6.00 in.
102 x 152 mm
6.00 x 6.00 in.
152 x 152 mm
CT44EOC45SS
CT44PEFC45SS
CTS44EFC45SS
CTS44PEFC45SS
CTS44EFCO45SS
CTS44EIC45SS
CTS44EOC45SS
CT44VSS
CT44TFCSS
CT44TICSS
CT44TOCSS
CT44PTFCSS
CTS44TFCSS
CTS44PTFCSS
CTS44TFCOSS
CTS44TICSS
CTS44TOCSS
CT44DTFCSS
CT44DTICSS
CT44DTOCSS
CT44DEFC90SS
CT44DEIC90SS
CT44DEOC90SS
CT44DEFC45SS
CT44DEIC45SS
CT44DEOC45SS
CT46EOC45SS
CT46PEFC45SS
CTS46EFC45SS
CTS46PEFC45SS
CTS46EFCO45SS
CTS46EIC45SS
CTS46EOC45SS
CT46VSS
CT46TFCSS
CT46TICSS
CT46TOCSS
CT46PTFCSS
CTS46TFCSS
CTS46PTFCSS
CTS46TFCOSS
CTS46TICSS
CTS46TOCSS
CT46DTFCSS
—
CT46TOCSS
CT46DEFC90SS
—
—
CT46DEFC45SS
—
—
CT66EOC45SS
CT66PEFC45SS
CTS66EFC45SS
CTS66PEFC45SS
CTS66EFCO45SS
CTS66EIC45SS
CTS66EOC45SS
CT66VSS
CT66TFCSS
CT66TICSS
CT66TOCSS
CT66PTFCSS
CTS66TFCSS
CTS66PTFCSS
CTS66TFCOSS
CTS66TICSS
CTS66TOCSS
CT66DTFCSS
CT66DTICSS
CT66DTOCSS
CT66DEFC90SS
CT66DEIC90SS
CT66DEOC90SS
CT66DEFC45SS
CT66DEIC45SS
CT66DEOC45SS
5
59
Bulletin
f40gt
EconoTrough, NEMA Type 3R
Industry Standards
UL 870 Listed; File No. E27524;
Raintight
File No. E27524; Raintight
F
4
H
4 12
W L
NEMA/EEMAC Type 3R
IEC 60529, IP 32
RTGV
Catalog Number
Catalog Number
F4412RTGV
F4424RTGV
F4436RTGV
F4448RTGV
F4460RTGV
F4472RTGV
F6612RTGV
F6618RTGV
F6624RTGV
F6636RTGV
F6648RTGV
F6660RTGV
F6672RTGV
F8812RTGV
F8824RTGV
F8836RTGV
F8848RTGV
F8860RTGV
F8872RTGV
F8896RTGV
F88116RTGV
F101024RTGV
F101036RTGV
F101048RTGV
F101060RTGV
F101072RTGV
F101096RTGV
F1010116RTGV
F121224RTGV
F121236RTGV
F121248RTGV
F121260RTGV
F121272RTGV
F121284RTGV
F121296RTGV
F1212116RTGV
F141448RTGV
F141472RTGV
F141496RTGV
F1414116RTGV
60
Technical Information Table of Contents
Comparison of Specific Non-Hazardous Applications - Outdoors.........................62
Comparison of Specific Non-Hazardous Applications - Indoors.............................62
Cross-Reference NEMA, UL, CSA vs. IEC Enclosure Type.............................................63
NEMA, UL and CSA Ratings - Non-Hazardous Locations............................................64
Enclosure Type Rating vs. IP Rating.....................................................................................66
Specifying Enclosure Materials............................................................................................. 67
Glossary - Non-Hazardous Environmental Conditions................................................68
Thermal Management
Critical Parameters (upper temperature limits).............................................................. 70
Electrical Reference
Ohm’s Law.....................................................................................................................................72
Series and Parallel Circuits......................................................................................................73
Common Electrical Distribution...........................................................................................73
Electrical Formulas..................................................................................................................... 74
Capacitance.................................................................................................................................. 75
Impedance / Reactance........................................................................................................... 76
Resistor Color Code....................................................................................................................77
Full-Load Current (Amps) for DC Motors...........................................................................78
Full-Load Current (Amps) for Single-Phase AC Motors................................................79
Glossary of Electrical Terms....................................................................................................79
Measurement
Gauge Equivalents.....................................................................................................................80
English-to-Metric Conversions..............................................................................................80
Celcius-to-Fahrenheit Conversions..................................................................................... 81
Decimal / Fraction / mm Equivalents..................................................................................82
61
Technical Information
Industry Standards
Industry Standards (Cont.)
Comparison of Specific Non-Hazardous Applications
in Outdoor Locations
Type of Enclosure
Provides a Degree of Protection Against
the Following Environmental Conditions
Incidental contact with the enclosed equipment
Rain, snow and sleetb
Sleetc
Windblown dust
Hose-down
Corrosive agents
Occasional temporary submersion
3
3Ra
3RXa
4
4X
6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
a These enclosures may be ventilated.
b External operating mechanisms are not required to be operable when enclosure is ice covered.
c External operating mechanisms are operable when enclosure is ice covered.
in Indoor Locations
Provides a Degree of Protection Against
the Following Environmental Conditions
Incidental contact with the enclosed equipment
Falling dirt
Falling liquids and light splashing
Dust, lint, fibers and flyingsb
Hose-down and splashing water
Oil and coolant seepage
Oil or coolant spraying and splashing
Corrosive agents
Occasional temporary submersion
Type of Enclosure
1a
4
4X
6
12
12K
13
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
a These enclosures may be ventilated. However, Type 1 may not provide protection against small particles of falling dirt when
ventilation is provided in the enclosure top. Consult Hoffman for more information.
b These fibers and flyings are non-hazardous materials and are not considered Class II type ignitable fibers or combustible flyings.
For Class III type ignitable fibers or combustible flyings see the National Electrical Code Section 505.
The preceding tables are reproduced by permission of the National Electrical Manufacturers Association from NEMA
Standards Publication 250 “Enclosures for Electrical Equipment (1000 Volts Maximum)”.
62
Enclosure Rating
Type 1
IP20
IP22
IP55
IP65
IP67
•
•
•
•
Type 4
Type 4X
•
Type 6
Type 12, 12K
IP66
•
Type 3
Type 3R, 3RX
IP64
Cross-Reference (Approximate)
NEMA, UL, CSA vs. IEC Enclosure Type
•
Type 13
•
IEC 60529 has no equivalents to NEMA enclosure Types 7, 8, 9, 10 or 11.
• Indicates compliance.
NEMA, UL and CSA are standard-writing organizations commonly recognized
in North America. Their ratings are based on similar application descriptions
and expected performance. UL and CSA both require enclosure testing by
qualified evaluators in their certified labs. They also send site inspectors
to make sure a manufacturer adheres to prescribed manufacturing
methods and material specifications. NEMA, on the other hand, does not
require independent testing and leaves compliance completely up to the
manufacturer.
63
64
Type 12K
Type 13
Indoor
Indoor
Outdoor Type 3
Type 12
Type 1
Indoor
Indoor
Enclosure
Type
UL
CSA
Indoor use to provide a degree of
protection against dust, dirt, fiber flyings,
dripping water and external condensation
of noncorrosive liquids.
Indoor use primarily to provide protection General purpose enclosure. Protects
against contact with the enclosed
against accidental contact with live parts.
equipment and against a limited amount
of falling dirt.
Indoor use; provides a degree of protection
against circulating dust, lint, fibers and
flyings; dripping and light splashing of
non-corrosive liquids; not provided with
knockouts.
Enclosures with knockouts are intended Indoor use to provide a degree of
Indoor use: provides a degree of protection
for indoor use primarily to provide a
protection against dust, dirt, fiber flyings, against circulating dust, lint, fibers and
degree of protection against dust, falling dripping water and external condensation flyings; dripping and light splashing of
dirt and dripping noncorrosive liquids.
of noncorrosive liquids.
noncorrosive liquids; not provided with
knockouts.
Enclosures are intended for indoor use
Indoor use to provide a degree of
Indoor use; provides a degree of
primarily to provide a degree of protection protection against lint, dust seepage,
protection against circulating dust, lint,
against dust, spraying of water, oil and
external condensation and spraying of
fibers and flyings; seepage and spraying
noncorrosive coolant.
water, oil and noncorrosive liquids.
of non-corrosive liquids, including oils
and coolants.
Enclosures are intended for outdoor use
Outdoor use to provide a degree of
Indoor or outdoor use; provides a degree
primarily to provide a degree of protection protection against windblown dust and
of protection against rain, snow and
against windblown dust, rain and sleet;
windblown rain; undamaged by the
windblown dust; undamaged by the
undamaged by the formation of ice on
formation of ice on the enclosure.
external formation of ice on the enclosure.
the enclosure.
primarily to provide a degree of protection
against contact with the enclosed
equipment or locations where unusual
service conditions do not exist.
against dust, falling dirt and dripping
noncorrosive liquids.
NEMA
NEMA, UL and CSA Ratings Non-Hazardous Locations
NEMA
Enclosures are intended for use
indoors or outdoors where
occasional submersion is
encountered; limited depth;
undamaged by the formation of ice
on the enclosure.
against falling rain and sleet; undamaged
by the formation of ice on the enclosure.
against corrosion, falling rain and sleet;
the enclosure.
Enclosures are intended for indoor or
outdoor use primarily to provide a degree
of protection against windblown dust and
rain, splashing water and hose directed
water; undamaged by the formation of ice
on the enclosure.
Enclosures are intended for indoor
or outdoor use primarily to provide a
degree of protection against corrosion,
windblown dust and rain, splashing water
and hose-directed water; undamaged by
the formation of ice on the enclosure.
See footnotes on page 66
Outdoor Type 6
Outdoor Type 4X
Outdoor Type 4
Outdoor Type 3RX
Outdoor Type 3R
Enclosure
Type
UL
Indoor or outdoor use to provide a
degree of protection against entry of
water during temporary submersion
at a limited depth; undamaged by
the external formation of ice on the
enclosure.
Either indoor or outdoor use to provide a
degree of protection against falling rain,
splashing water and hose-directed water;
undamaged by the formation of ice on the
enclosure; resists corrosion.
Either indoor or outdoor use to provide a
degree of protection against falling rain,
splashing water and hose-directed water;
the enclosure.
Outdoor use to provide a degree
of protection against falling rain;
the enclosure.
Not specifically defined.
CSA
Indoor or outdoor use; provides a
degree of protection against
the entry of water during temporary
submersion at a limited
depth. Undamaged by the external
formation of ice on the
enclosure; resists corrosion.
Indoor or outdoor use; provides a degree of
protection against rain, snow, windblown
dust, splashing and hose-directed water;
undamaged by the external formation of
ice on the enclosure; resists corrosion.
Indoor or outdoor use; provides a degree of
protection against rain, snow, windblown
dust, splashing and hose-directed water;
ice on the enclosure.
Indoor or outdoor use; provides a degree
of protection against rain and snow;
ice on the enclosure.
Not specifically defined.
65
a
This material is reproduced with permission from NEMA. The preceding descriptions, however, are not intended to be
complete representations of National Electrical Manufacturers Association standards for enclosures nor those of the
Electrical and Electronic Manufacturers Association of Canada.
b
This material is reproduced with permission from Underwriters Laboratories Inc. Enclosures for Electrical Equipment,
UL 50, and Industrial Control Panels, UL 508A.
Underwriters Laboratories (UL) shall not be responsible for the use of or reliance upon a UL Standard by anyone.
UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in
connection with the use, interpretation of, or reliance upon a UL Standard.
c
This material is reproduced with permission from the Canadian Standards Association.
Enclosure Type Rating vs. IP Rating
Electrical enclosures are rated by Type (NEMA 250 / UL 50, 50E), and/or IP rating
(IEC 60529) based upon the degree of protection provided. Type ratings and IP
ratings have only the following in common:
1. A degree of protection for persons from hazardous components inside the
enclosure
2. A degree of protection for equipment inside the enclosure from ingress of
solid foreign objects, including dust
3. A degree of protection for equipment inside the enclosure from ingress of
water
NEMA 250 and UL 50 and 50E Type rating documentation defines additional
requirements that a Type-rated enclosure must meet. These include:
•• Mechanical impact on enclosure walls
•• Gasket aging and oil resistance
•• Corrosion resistance
•• Door and cover latching requirements
•• Sheet metal gauge construction requirements (UL 50 only)
Electrical enclosures that carry only an IP rating have not been designed or
tested to the additional Type-rating requirements. For this reason, and because
the tests and evaluations for other characteristics are not identical, the IP
ratings cannot be exactly equated with NEMA enclosure Types.
Electrical enclosures manufactured by Hoffman are tested for and carry
both Type and IP ratings.
66
While some enclosure materials offer exceptional corrosion resistance,
they may not provide the physical strength required to support internal
components. This graph plots primary enclosure materials on a grid of physical
strength and corrosion resistance.
Strength/Corrosion Resistance of Enclosure Materials
67
Specifying Enclosure Materials
Glossary Terms Specifying Non-Hazardous Environmental
Conditions
Corrosion-Resistant— Constructed to provide a degree of protection
against exposure to corrosive agents such as salt spray. Type 3RX and 4X
enclosures meet this requirement.
Damp Locations—Locations protected from weather and not subject to
saturation with water or other liquids but subject to moderate degrees of
moisture. Examples of damp locations include partially protected areas under
canopies, marquees, roofed open porches and like locations, and interior
locations subject to moderate degrees of moisture, such as some basements,
some barns and some cold-storage warehouses. See the indoor enclosure
types and select a type rating that fits the specific application.
Dust-tight— Constructed so that circulating or airborne dust will not enter
the enclosure under specified test conditions. Type 3, 4, 4X, 12, 12K and 13
Drip-tight— Constructed so that falling moisture or dirt does not enter
the enclosure under specified test conditions. Type 3, 4, 4X, 12, 12K and 13
Indoor—Not to be exposed to weather. Type 1, 12, 12K and 13 enclosures
meet this requirement.
Oil-Resistant— Constructed so that oil will not interfere with successful
operation of equipment. Type 12 and 13 enclosures meet this requirement.
Oil-tight— Constructed so that oil will not enter the enclosure under specified
test conditions. Type 13 enclosures meet this requirement.
Outdoor— Constructed or protected so that exposure to the weather will
not interfere with successful operation of equipment. Type 3, 3R, 4, 4X and 6
enclosures meet this requirement. These ratings can also be used indoors.
68
interfering with the successful operation of the apparatus or result in wetting
of live parts and wiring within the enclosure under specified test conditions.
Type 3R and 3RX enclosures meet this requirement.
Rain-tight— Constructed or protected so that exposure to beating rain will
not result in water entering the enclosure under specified test conditions. Type
3, 4, 4X and 6 enclosures meet this requirement.
Water-tight— Constructed so that moisture will not enter the enclosure when
it is subjected to a stream of water under specified test conditions. Type 4, 4X
and 6 enclosures meet this requirement.
Weatherproof— Constructed or protected so that exposure to the weather
will not interfere with successful operation of the equipment. Rainproof,
raintight or watertight equipment can fulfill the requirements for weatherproof
where varying weather conditions other than wetness, such as snow, ice, dust
or temperature extremes, are not a factor.
Wet Locations—Installations underground or in concrete slabs or masonry
in direct contact with the earth; in locations subject to saturation with water
or other liquids, such as vehicle washing areas; and in unprotected locations
exposed to weather. Use weatherproof enclosures with a type rating that fits
the specific application.
69
Rainproof— Constructed, protected or treated to prevent beating rain from
Thermal Management
Critical Parameters (upper temperature limits)
Enclosure Heat Load Calculations
Drive heat:
WD = ([HP x 745.7 Watts/HP] / EM) x (I-ED)
Watts
Total heat:
Estimate an additional 25%a for wire connections and other components.
W T = WD x 1.25a Watts
Required airflow:
CFM = (W T x 3.16) / (Tint - Tamb)
Ft3 / Min.
This is an estimated factor. Further investigation is necessary to obtain actual
total heat dissipated in enclosure.
a
70
Thermal Management (Cont.)
Variable Descriptions
Typical Values
Variables
Maximum ambient temperature
Tamb
104 F
Maximum internal temperature
Tint
122 F
Typical temperature rise
(Tint - Tamb)
15 F
Full-load drive power
hp
Motor efficiencyb
EM
.80-.96
b
Drive efficiency
ED
.96-.98
Drive heat loss
WD
Total heat loss
WT
Required airflow
CFM
b
Use full-load efficiency. Motor and drive efficiency will vary based on HP and voltage.
Sample Values
Airflow when
Additional Total
Typical Full
Typical Full
Drive
Tint - Tamb
Drive
Heat
Heat
Load
Load
Heat
Horsepower Rating - Motor Rating - Drive Loss WD Lossa
Loss WT = 15 F
(Watts)
(Watts)
(Watts) (CFM)
(hp)
Efficiency
Efficiency
3
.86
.97
78
20
98
21
10
.90
.97
249
62
311
65
25
.91
.97
615
154
768
162
40
.92
.98
648
162
811
171
75
.93
.98
1203
301
1503
317
100
.94
.98
1587
397
1983
418
a
Additional Heat Loss - This is an estimated factor. Further investigation is necessary to obtain actual total
heat dissipated in enclosure.
71
Electrical Reference
Ohm’s Law
The relationship between voltage,
current and resistance in an electrical
circuit where:
V +
_
I = current (amps)
V = E = volts (electromotive force or
potential difference)
R = resistance (ohms)
P = power (Watts)
In mathematical terms:
I
R
I=E÷R
E=I x R
R=E÷I
√
=√
Amps =
I
Watts =
P =
72
Volts
Watts
=
Ohms
Volts
P
E
= E
=
R
=
Volts2
= Volts x Amps = Amps2 x Ohms
Ohms
2
E
= E x I = I2 x R
R
√ Watts x Ohms = Amps x Ohms =
P
=√PxR = IxR =
I
Volts =
E
Watts
Ohms
P
R
Watts
Amps
Electrical Reference (Cont.)
2
Ohms = Volts = Watts2 = Volts
Watts
Amps
Amps
2
R = E
= P2 = E
P
I
I
Series Circuits
Total Volts = ET = E1 + E2 + E3
Total Amps = IT = I1 = I2 = I3
Total Ohms = RT = R1 + R2 + R3
Parallel Circuits
If total current and total voltage are unknown, use this formula:
1
1
1
1
=
+
+
RT
R1
R2
R3
The total resistance of several matching resistors (same resistance in each
one) connected in parallel equals the resistance of one resister divided by
the number of resistors:
RT =
R
where RT is total resistance, R is the resistance
N of one resistor
and N is the number of resistors
Common Electrical Distribution
120/240 Volt Single-Phase Three-Wire System
120/240 Volt Three-Phase Four-Wire System (Delta High Leg)
120/208 Volt Three-Phase Four-Wire System (WYE Connected)
277/480 Volt Three-Phase Four-Wire System (WYE Connected)
73
Electrical Formulas
Amps when HP is known
Horsepower (HP)
DC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
E x I x % Efficiency
746
E x I x % Efficiency x PF
746
E x I x % Efficiency x PF x 2
746
E x I x % Efficiency x PF x 1.73
746
DC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
Amps when KW is known
Kilowatts (KW)
DC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
ExI
1000
E x I x PF
1000
E x I x PF x 2
1000
E x I x PF x 1.73
1000
DC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
Where 74
—
ExI
1000
ExIx2
1000
E x I x 1.73
1000
E = Volts
I = Amps
W = Watts
KW x 1000
E
KW x 1000
E x PF
KW x 1000
E x PF x 2
KW x 1000
E x PF x 1.73
Amps when KVA is known
Kilovolt Amps (KVA)
DC
HP x 746
E x % Efficiency
HP x 746
E x % Efficiency x PF
HP x 746
E x % Efficiency x PF x 2
HP x 746
E x % Efficiency x PF x 1.73
DC
Single
Phase AC
2 Phase-4
Wire AC
3 Phase AC
—
KVA x 1000
E
KVA x 1000
Ex2
KVA x 1000
E x 1.73
% Efficiency = Output (Watts)
Input (Watts)
PF = Power Factor
C= Q =
E
Capacitance (C)
Coulombs
Volts
Where C is capacitance in farads, Q is the quantity of stored electrical
charge in coulombs and E is the difference in potential in volts.
Therefore, stored electric charge can be calculated using the formula:
Q = CV
The difference in potential or voltage of the capacitor can be calculated
using the formula:
E = Q/C
The total capacitance in a circuit containing capacitors in parallel:
C T = C1 + C2 + C3 . . .
The total capacitance in a circuit containing capacitors in series:
1 = 1 + 1 + 1 +...
CT
C1
C2
C3
75
Impedance
The impedance (Z) is the combination of resistance and reactance in an
alternating current circuit.
E
Z=
I
Z=
√R +X
Z=
√ R + (X - X )
2
2
2
L
C
2
Where:
Z = impedance (in ohms)
R = resistance (in ohms)
E = volts
I = amps
X = reactance (in ohms)
XL = inductive reactance (in ohms)
XC = capacitive reactance (in ohms)
Reactance
Reactance (X) is a component of impedance caused by inductance and
capacitance to an alternating current in a given circuit.
Inductive reactance:
XL = 2 x 3.1416 x F x L
Where:
F = frequency (in Hertz)
L = inductance (in Henry)
Capacitive reactance:
1
XC =
where C = conductance (in Farads)
2 x 3.1416 x F x C
76
Band Color
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Gold
Silver
No Band
1st Band
0
1
2
3
4
5
6
7
8
9
1st
band
2nd Band
0
1
2
3
4
5
6
7
8
9
2nd
band
Multiplier
1
10
100
1,000
10,000
100,000
1,000,000
10,000,000
100,000,000
1,000,000,000
0.1
0.01
Resistor Color Code
% Tolerance
± 5%
± 10%
± 20%
% Tolerance
Multiplier
77
Full–Load Current (Amps) for DC Motors
Motors running at base speed.
HP
90 V
120 V
180 V
240 V
500 V
550 V
1/4
1/3
1/2
3/4
1
1 1/2
2
3
5
7 1/2
10
15
20
25
30
40
50
60
75
100
125
150
200
4
5.2
6.8
9.6
12.2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3.1
4.1
5.4
7.6
9.5
13.2
17
25
40
58
76
–
–
–
–
–
–
–
–
–
–
–
–
2
2.6
3.4
4.8
6.1
8.3
10.8
16
27
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.6
2
2.7
3.8
4.7
6.6
8.5
12.2
20
29
38
55
72
89
106
140
173
206
255
341
425
506
675
–
–
–
–
–
–
–
–
–
13.6
18
27
34
43
51
67
83
99
123
164
205
246
330
–
–
–
–
–
–
–
–
–
12.2
16
24
31
38
46
61
75
90
111
148
185
222
294
Table based on 2008 National Electrical Code.
78
HP
115 V
200 V
208 V
230 V
1/6
1/4
1/3
1/2
3/4
1
1 1/2
2
3
5
7 1/2
10
4.4
5.8
7.2
9.8
13.8
16
20
24
34
56
80
100
2.5
3.3
4.1
5.6
7.9
9.2
11.5
13.8
19.6
32.2
46
57.5
2.4
3.2
4
5.4
7.6
8.8
11
13.2
18.7
30.8
44
55
2.2
2.9
3.6
4.9
6.9
8
10
12
17
28
40
50
Full-Load Current (Amps) for Single-Phase AC Motors
Amps listed are for voltage ranges of 110-120 and 220-240.
Glossary of Electrical Terms
Capacitance—a measure of the amount of electric charge stored (or
separated) for a given electric potential.
Impedance—the generalization of the concept of resistance from DC to AC. It
is a way to represent how much current will flow with a specified (AC) voltage
across the impedance. If there is one volt AC across an impedance that lets
one ampere of AC current flow, the impedance is defined by the AC version of
Ohm’s law and is one ohm.
Potential— the potential energy per unit of charge associated with a static
(time-invariant) electric field, also called the electrostatic potential, typically
measured in volts.
Power Factor— the power factor of an AC electric power system is defined as
the ratio of the real power to the apparent power, and is a number between 0
and 1.
Reactance— the imaginary part of impedance caused by the presence of
inductors or capacitors in the circuit.
79
Measurement
Gauge Equivalents
Gauge Number
Nominal Thickness
in inches
Nominal Thickness
in millimeters
7 Gauge
8 Gauge
9 Gauge
10 Gauge
11 Gauge
12 Gauge
13 Gauge
14 Gauge
15 Gauge
16 Gauge
17 Gauge
18 Gauge
19 Gauge
20 Gauge
21 Gauge
22 Gauge
0.179
0.164
0.150
0.134
0.120
0.105
0.090
0.075
0.067
0.060
0.054
0.048
0.042
0.036
0.033
0.030
4.547
4.166
3.810
3.404
3.048
2.667
2.286
1.905
1.702
1.524
1.372
1.219
1.067
0.914
0.838
0.762
English-to-Metric Conversions
English
1 inch
12 inches = 1 foot
3 feet = 1 yard
1 inch2
1 foot2 = 144 inches2
9 feet2 = 1 yard2 = 1296 inches2
640 acres = 1 mile2
1 ft.3 = 1,728 inches2
1 yard2 = 27 ft.2
2 pints = 1 quart = .5 gallon
16 oz. = 1 lb.
2,000 lb. = 1 ton
80
Metric
2.54 centimeters = 25.4 millimeters
30.48 centimeters = 304.8 millimeters
.914 meters = 91.44 centimeters
6.45 centimeters2
929.03 centimeters2
8361.3 centimeters2 = 0.83613 meters2
2.59 kilometers2
33.98 meters2
.76 meters2
.94 liter
453.59 grams = .454 kg
1016 kg
Measurement (Cont.)
°C
°F
°C
°F
°C
°F
°C
°F
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
32
33.8
35.6
37.4
39.2
41
42.8
44.6
46.4
48.2
50
51.8
53.6
55.4
57.2
59
60.8
62.6
64.4
66.2
68
69.8
71.6
73.4
75.2
77
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
78.8
80.6
82.4
84.2
86
87.8
89.6
91.4
93.2
95
96.8
98.6
100.4
102.2
104
105.8
107.6
109.4
111.2
113
114.8
116.6
118.4
120.2
122
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
123.8
125.6
127.4
129.2
131
132.8
134.6
136.4
138.2
140
141.8
143.6
145.4
147.2
149
150.8
152.6
154.4
156.2
158
159.8
161.6
163.4
165.2
167
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
168.8
170.6
172.4
174.2
176
177.8
179.6
181.4
183.2
185
186.8
188.6
190.4
192.2
194
195.8
197.6
199.4
201.2
203
204.8
206.6
208.4
210.2
212
°C = 5/9 x (°F - 32)
°F = (9/5 x °C) + 32
81
Celcius-to-Fahrenheit Conversions
Measurement
Decimal / Fraction / mm Equivalents
Decimal
.0156
.0313
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1562
.1719
.1875
.2031
.2188
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4688
.4844
.5000
82
Fraction
mm
1/32
1/16
2/32
3/32
1/8
2/16
4/32
5/32
3/16
6/32
7/32
1/4
2/8
4/16
8/32
9/32
5/16
10/32
11/32
3/8
6/16
12/32
13/32
7/16
14/32
15/32
1/2
2/4
4/8
8/16
16/32
1/64
2/64
3/64
4/64
5/64
6/64
7/64
8/64
9/64
10/64
11/64
12/64
13/64
14/64
15/64
16/64
17/64
18/64
19/64
20/64
21/64
22/64
23/64
24/64
25/64
26/64
27/64
28/64
29/64
30/64
31/64
32/64
.396
.795
1.191
1.588
1.984
2.383
2.779
3.175
3.571
3.768
4.366
4.763
5.159
5.558
5.954
6.350
6.746
7.143
7.541
7.938
8.334
8.733
9.129
9.525
9.921
10.317
10.716
11.112
11.509
11.908
12.304
12.700
Measurement (Cont.)
Decimal
.5156
.5312
.5469
.5625
.5781
.5938
.6094
.6250
.6406
.6562
.6719
.6876
.7031
.7188
.7344
.7500
.7656
.7812
.7969
.8125
.8281
.8438
.8465
.8750
.8906
.9062
.9219
.9375
.9531
.9688
.9844
1.000
Fraction
mm
17/32
9/16
18/32
19/32
5/8
10/16
20/32
21/32
11/16
22/32
23/32
3/4
6/8
12/16
24/32
25/32
13/16
26/32
27/32
7/8
14/16
28/32
29/32
15/16
30/32
31/32
1
4/4
8/8
16/16
32/32
33/64
34/64
35/64
36/64
37/64
38/64
39/64
40/64
41/64
42/64
43/64
44/64
45/64
46/64
47/64
48/64
49/64
50/64
51/64
52/64
53/64
54/64
55/64
56/64
57/64
58/64
59/64
60/64
61/64
62/64
63/64
64/64
13.096
13.492
13.891
14.288
14.684
15.083
15.479
15.875
16.271
16.667
17.066
17.465
17.859
18.258
18.654
19.050
19.446
19.842
20.241
20.637
21.034
21.433
21.501
22.225
22.621
23.017
23.416
23.813
24.209
24.608
25.004
25.400
83
Decimal / Fraction / mm Equivalents (Cont.)
Measurement
84
Notes
THREE EASY WAYS TO CONTACT US
If you have questions, comments or need technical
support for our products and services, choose from the
contact information below.
1 CALL
INDUSTRIAL/CONTRACTOR
Customer Service and Orders
Tel: 763.422.2211
Fax: 763.422.2600
Technical Applications
Tel: 763.422.2175
Fax: 763.422.2600
2 GO ONLINE
TO FIND A SALES OFFICE
Go to hoffmanonline.com to locate
your local Hoffman sales office and
speak with a representative who can
match you with a local distributor.
3 SUBMIT QUESTIONS
VIA OUR ONLINE FORM
Enter your questions or comments
at hoffmanonline.com, and we will
respond as quickly as possible.
Hoffman Contractor Pocket Reference, Volume 4, is published by Pentair
Technical Products, 2100 Hoffman Way, Anoka, MN 55303. Extracts from
this literature may be copied or reproduced only with prior approval from
Pentair Technical Products' Marketing Communications Department and if
the originator is credited. Pentair Technical Products' policy is to continually
develop and improve products. The company reserves the right to change
product detail and technical specifications. We cannot accept any liability for
publication errors and omissions.
RETURNS & CLAIMS
Tel: 763.422.2642
Fax: 763.422.2602
INTERNATIONAL
Customer Service
Tel: 763.422.2570
Fax: 763.422.2606
NORTH AMERICA
EUROPE
Pentair Technical Products
2100 Hoffman Way
Anoka, MN 55303-1745
Tel: +1 (763) 421-2240
170 Commerce Drive
Warwick, RI 02886
Tel. +1 (401) 732-3770
7328 Trade Street
San Diego, CA 92121
Tel. +1 (858) 740-2400
1120 Rock Road
Radford, VA 24141
Tel: +1 (540) 639-4440
Hoffman Enclosures Inc.
111 Grangeway Ave., #504
Scarborough, ON M1H 3E9
Tel: +1 (416) 289-2770
Hoffman Enclosures Mexico,
S. de R.L. de C.V.
Arquimedes 33 Piso 1
Colonia Palmas Polanco
Mexico DF 11560
Tel: +52 55 5280 1449
Schroff GmbH
Langenalber Straße 96-100
75334 Straubenhardt, Germany
Tel. +49 (0)7082 794-0
Schroff UK Ltd.
Maylands Avenue
Hemel Hempstead
Herts HP2 7DE Great Britain
Tel. +44 (0)1442 240 471
Schroff SAS
Z.I. 4, rue du Marais
Boîte Postale 16
67660 Betschdorf, France
Tel. +33 (0)3 88 90 64 90
Schroff Scandinavia AB
Flygfältsgatan 11
P.O. Box 2003
12821 Skarpnäck, Sweden
Tel. +46 (0) 8 683 61 00
Schroff Scandinavia AB
Peräsimentie 8
FIN-03100 Nummela
Finland
Tel. +358 9 222 68 00
Schroff S.r.l.
Via Brughiera 1
20010 Pregnana Milanese (MI)
Italy
Tel. +39 02 932 714-1
Pentair Poland
Sp.z.o.o.
ul. Marynarska 21
PL-02-674 Warszawa Poland
Tel. +48 (0) 22 607 06 16
SOUTH AMERICA
Pentair Taunus Eletrometalurgica Ltda
Rua Joao Marcon, 165
18550.000 – Centro Boituva – SP Brazil
Tel: +55 15 3363 9100
ASIA
21st Floor of Cloud Nine Plaza
No. 1118 West Yan'an Road
Changning District, Shanghai
P.R. China
Tel: +86 400 820 1133
Pentair Technical Products India
Pvt. Ltd.
Unit 1, Factory 2
(Sai Lakshmi Industrial Campus)
Kannamangala, Bidarahalli Hobli
Whitefield – Hoskote Road
Bangalore – 560 067
Tel: +91 80 2845 4640
Hoffman Schroff Pte Ltd.
18 Boon Lay Way
TradeHub 21, #04-110/111
Singapore 609966
Tel: +65 6795 2213
Schroff K.K.
Nisso No.13 Bldg. 4F
2-5-1 Shinyokohama
Kohoku-ku yokohama-shi
Kanagawa 222-0033 Japan
Tel. +81 (0)45 476 02 81
For worldwide locations, see pentairtechnicalproducts.com
©2010 Pentair Technical Products
Cat-00014 D

Contractor Pocket Reference

Transcription

Similar documents

Lay-In NEMA Type 1 Galvanized Wireway

LayIn NEMA Type 1 Galvanized Wireway

Detailed Specifications