2016 Product Catalogue
Transcription
2016 Product Catalogue
2016 Product Catalogue 149YEARS a long tradition of quality and precision Established in 1867 in Couvet, Switzerland – an area that would soon become world-renowned for precision machining, watch manufacturing, and microelectronics – Edouard Dubied & Co initially produced high-quality knitting machinery. In 1878 the company added lathes and milling machinery, which it sold worldwide until 1987. Dubied began manufacturing high-quality automotive and bicycle components as early as 1902 under the name edco, an acronym for Edouard Dubied & Co; the company started producing hubs and bottom brackets in 1930. edco has long been known for its innovation, including a patent in 1975 for a sealed bottom bracket assembly – considered standard equipment today. By 1988 the company was focusing on bicycle components, though it continued to provide worldwide service for Dubied machinery and contract manufacturing for other industries. In 1993 the company released IGP, an integrated system with shift levers on the brake lever matched with hydraulic brake calipers. And 2000 saw the release of the SuperG hub, a design that has since been copied many times over. Throughout the 1990s and early 2000s edco designed, engineered, and manufactured bicycle components for a number of other brands. In 2007, Dutch inventor and engineer Rob van Hoek acquired the company, renamed it Edco Engineering BV, and relocated the design, engineering, testing and assembly operations to ’s-Hertogenbosch, The Netherlands. As hub components continued to be produced in Couvet, the focus changed to the expanding carbon wheel market. Innovations continued with the introduction of the Multisys freehub body, whose patented design allows for Shimano/SRAM or Campagnolo cassettes to be fitted without modifications. In 2015 the company added its own carbon and composite manufacturing facility in China, where edco weaves raw carbon fabric to exacting specifications, formulates and impregnates resins using state-of-the-art chemical technology, and molds and finishes the final product. Today, edco’s advantage lies in its ability to design, engineer, and manufacture its products through complete control of the entire process. g. ineerin g n e d Inspire anics. h c e m tive Innova . anship m s t f a r lous c Meticu H and bu ilt whee ls for -road, a road, off nd track racing. 1 TECHNOLOGY always looking forward Our Integrated Low Temperature (ILT) braking system is used on all edco carbon and composite rims. Layered 3K carbon; hightemperature, wear-resistant resin; a proprietary surface finish; and specially developed brake pads provide a high coefficient of friction while maintaining stable temperatures across a variety of conditions. Developed as part of the ILT braking system, our 3K carbon rim bed and brake track provides a stable platform for the ultimate carbon rim – a strong foundation that performs well under the temperature extremes rim braking creates. 9K-8mm twill weave is one of edco’s proprietary rim construction materials: 9,000 strands of carbon fiber per tow, or bundle, hand-woven into a unique 8mm twill pattern. Extremely strong and stiff, the material helps prevent any sidewall damage from TOTALCONTROL from start to finish propagating through the rim structure – at a fiber areal weight of only 150 grams. All edco road wheels and hubs feature our patented Multisys freehub body, a design that allows the installation of Campagnolo or Shimano/SRAM cassettes without changes or modifications. The installation keyways on Shimano/SRAM cassettes often bite into the softer aluminum material on the freehub body, making them difficult to install and remove. edco’s patent-pending Antibite system incorporates three hardened steel inserts on the Multisys freehub body, preventing damage to the aluminum. In order to more precisely drill spoke holes in deep carbon rims, edco, in cooperation with Total Support Group (TSG), developed a 7-axis CNC rim drilling machine that drills from the center out. This method ensures that spoke holes will always be at the perfect location and the correct angle, eliminating unnecessary tension that can lead to spontaneous spoke breakage. Rather than use standard industrial bearings in its hubs, edco has developed its own bearing specification to provide years of trouble-free, high-performance use. Lubrication, ball and raceway tolerances, seal design: everything is considered and tested – both in the lab and in the real world – before they’re assembled by hand at our factory in The Netherlands. From initial concept to final packing, edco maintains total control throughout the entire production process. Design, prototyping, testing, manufacturing, and assembly are all done in-house to ensure the highest possible quality for our customers. Innovative products, world-class design. An innovator in the bicycle component market since its earliest days, edco was one of the first manufacturers of the Presta-style valve and 3-speed internal gear hub. In the late 1980s and early 90s, several key innovations were introduced: the sealed bearing bottom bracket, brake/shift lever integration, hydraulic braking. And we continue to innovate. Our design process starts with the latest CAD, FEM, and CFD software technology and continues with 3D printed models, prototypes, and extensive lab testing. Swiss-made. Hub parts are made in Switzerland’s Jura province, where the country’s famous watch industry originated. State-of-the-art equipment and the famous Swiss attention to detail ensure that every edco hub comes off the line with bearing alignment tolerance within 0.001mm. Extensive quality control. All edco hubs undergo a complete dimensional check before final hand-assembly. Each rim is subjected to a torsional and compressive load test prior to roundness and flatness quality controls. The completed wheels go through a 14-step quality control check before they’re boxed and shipped to the customer. Handbuilt by professionals. Our hubs and wheels are hand-assembled by master wheel builders at our head office in ’s-Hertogenbosch, The Netherlands. Each wheelset requires approximately one and a half hours to achieve perfectly even spoke tension and a 0.2mm lateral tolerance. Top quality in every wheel. From our entry-level OPTIMA series to our innovative SUPERSPORT range, all edco wheels have gone through the same design, testing, manufacturing, and assembly process. We never compromise on quality. Every edco hub benefits from our 5-point sealing system: (1) bearing lubrication type and fill percentage, (2) a frictionless inner seal, (3) a low-friction outer seal, (4) hydrophobic nanocoating, and (5) a nitrile rubber seal to close the system. 2 3 SUPERSPORTSERIES acceleration + climbing A showcase of design, engineering, and manufacturing, edco sacrifice nothing to achieve SUPERSPORT’s ultra- AEROSPORTSERIES speed + stability low weight and competition-readiness. Rims are constructed from our 9K-8mm twill weave carbon for stiffness; a 3K carbon rim bed and ILT brake track offers superior stopping power in all conditions. Using 2.9-gram Sapim CX carbon spokes and our Swiss-made Victory hubs, these wheels are handbuilt in The Netherlands. AEROSPORT’s deep V profile, based on aircraft design principles, aims to calm the turbulence generated at the leading edge of the wheel. Proven both in the wind tunnel and on the road, these wheels give little steering torque at high angles of attack, providing unparalleled crosswind stability. edco engineered AEROSPORT with a combination of aerospace foam and our proprietary 9K-8mm twill weave carbon, making them perfect for time trials, triathlons, and model tyre depth internal width external width weight (set) decal options 46mm − 25.5mm 1138g WB, BB Julier clincher tubeless ready 28mm 17mm 25.5mm 1019g WB, BB Neggia Light tubular 25mm − 22.0mm 950g WB, BB Umbrial Lighttubular road / criterium racing. Handbuilt in The Netherlands. Comes with edco quick-release skewers, 11T + 12T lock ring, CESSO red brake pads, Continental GP4000 S II 700x25 clinchers or Sprinter 25mm tubulars, and two edco wheel bags. Weights are based on pre-production prototype models. Check www.edco-wheels.co.uk for the latest details. Available summ er 2016! Gesero / front Gesero / rear model tyre depth Umbrial / rear internal external weight width width (set) decal options Simplon clincher tubeless ready 105mm 17mm 26.5mm 2140g WB, BB Fluela clincher tubeless ready 85mm 17mm 26.5mm 1900g WB, BB Gesero clincher tubeless ready 65mm 17mm 26.5mm 1667g WB, BB Gesero Light tubular 65mm − 26.5mm 1447g WB, BB Umbrial clincher tubeless ready 45mm 17mm 26.5mm 1507g WB, BB Umbrial Light tubular 45mm − 26.5mm 1287g WB, BB Comes with edco quick-release skewers, 11T + 12T lock ring, CESSO red brake pads, Continental GP4000 S II 700x25 clinchers or Sprinter 25mm tubulars, and two edco wheel bags. Decal options: WB = white on black, BB = black on black (see page 11 for more details). 4 5 PROSPORTSERIES the perfect all-around wheel Light, stiff, and wide, PROSPORT is our go-anywhere-fast, do-everything-well wheel. Constructed from edco’s proprietary unidirectional carbon with our 3K carbon rim bed and ILT brake track, its 25.5mm U-shaped profile mates perfectly with today’s wider tyres. Add edco Aptera hubs and Sapim CX-Sprint aero spokes, and PROSPORT offers the perfect combination of features for a wide range of uses at a very competitive price. Handbuilt in The Netherlands. OPTIMASERIES durable, reliable, low-maintenance Designed for durability, OPTIMA provides legendary edco performance at an entry-level price. Roches models feature extruded 6000 series alloy rims laced to our SuperG hubs with double-butted Sapim Race spokes; Albis 50 and Albula 38 carbon clincher models are constructed from edco’s proprietary carbon composite material. Wide U-shaped profiles are aerodynamic, stiff, and compatible with 23-28mm tyres. Handbuilt in The Netherlands. Albis / front model tyre depth Albis Julier / front Pillon / rear clincher 50mm internal external width width weight (set) decal options 17mm 25.5mm 1521g WB, BB, BW WB, BB, BW Albis Light tubular 50mm − 25.5mm 1380g Albis DB* clincher 50mm 17mm 25.5mm 1794g WB, BB Pillon clincher 35mm 17mm 25.5mm 1497g WB, BB, BW Pillon Light tubular 35mm − 25.5mm 1294g WB, BB, BW Pillon DB* clincher WB, BB Pillon Light DB*tubular 35mm 17mm 25.5mm 1678g 35mm − 25.5mm 1678g WB Julier clincher 28mm 17mm 25.5mm 1409g WB, BB, BW Julier Light tubular 28mm − 25.5mm 1230g WB, BB, BW Albis / rear Albula / front Roches / rear Comes with edco quick-release skewers, 11T + 12T lock ring, CESSO red brake pads, Continental GP4000 S II 700x25 clinchers or Sprinter 25mm tubulars, and two edco wheel bags. Decal options: WB = white on black, BB = black on black, BW = black on white (see page 11 for more details). *Disc brake models use SuperG FD hubs and multiple axle options are available (see page 12 for more details). model tyre depth internal external width width weight (set) decal options Albis clincher 50mm 17mm 25.5mm 1949g WB, BB, BW Albula clincher 38mm 17mm 25.5mm 1697g WB, BB, BW Roches* clincher tubeless ready 22mm 19mm 24.0mm 1586g WB, BB, BW Roches* DB† clincher tubeless ready 22mm 19mm 24.0mm 1724g WB Comes with edco quick-release skewers, 11T + 12T lock rings, CESSO red brake pads & Continental Grand Sport Race 700x25 clinchers. Decal options: WB = white on black, BB = black on black, BW = black on white (see page 11 for more details). *Roches models do not include brake pads. Normal pads acceptable. † 6 Disc brake models use SuperG FD hubs and multiple axle options are available (see page 12 for more details). 7 DISCBRAKE road, cross, gravel, adventure Disc brakes are now being used at the highest levels of competition, and are being spec'd as standard equipment on many types of bikes today. edco has been producing high-quality, compatible hubs since disc brakes first appeared in the mid-1990s. We’ve translated that experience and know-how into a range of wheels for today’s most popular applications – including one alloy and three carbon models – all using our Swiss-made SuperG FD hub based on the Centerlock standard. All edco disc brake wheels are handbuilt in The Netherlands. MOUNTAINSPORTSERIES tough and responsive Whether you're racing XC, trail riding, heading out in to the hills, or racing Enduro, edco has a full line of Albis DB / front Albis DB / rear Roches DB / front precision-made wheels for your mountain bike. Featuring the unique webbed flanges of our Swiss-made Apaxvia hub, edco’s MOUNTAINSPORT series offers perfect spoke geometry. Rims are an asymmetric design built with unidirectional carbon and a 3K carbon rim bed that incorporates a hookless tyre bead channel; 28 straight- series model tyre depth internalexternalweight width width (set) decal options MOUNTAINSPORT wheels can be converted to today's popular axle standards: 100/135QR, F12x100, F15x100, OPTIMA Roches DB clincher tubeless ready 22mm 19mm R12x135-142-148. PROSPORT Albis DB clincher 50mm 17mm 25.5mm1794g WB * available Autumn 2016 PROSPORT Pillon DB clincher 35mm 17mm 25.5mm1678g WB PROSPORT Pillon Light DB tubular 35mm pull Sapim spokes in a 4-cross pattern offer more vertical compliance while maintaining high lateral stiffness. All model bead channel depth internalexternaldiameter width width ISO decal options Vorab 29 XC hookless26mm23mm 29mm 622 WB Vorab 27.5 XChookless 26mm 23mm 29mm 584 WB Combin 29 AMhookless 26mm 26mm 33mm 622 WB Combin 27.5 AMhookless 26mm 26mm 33mm 584 WB − 24.0mm 25.5mm 1724g 1678g WB WB Multiple axle options are available (see page 12 for more details). Delivered with Continental tyres, Shimano/SRAM freehub with edco Antibite. 6-bolt Centerlock adapters and XD Drivers available (see page 12 for more details). Decals only available in white on black (see page 11 for more details). 8 9 PRODUCTDETAILS decal options WB: white on black BW: black on white BB: black on black rim profiles (mm) SUPERSPORT AEROSPORT 26.5 17 25.5 PROSPORT OPTIMA 25.5 17 26.5 25.5 17 25.5 35 46 50 50 65 Pillon Lt 105 Umbrial Lt Albis Albis 25.5 17 Gesero Lt 25.5 17 28 28 50 Simplon Julier 38 Julier 45 26.5 17 Umbrial 24 19 28 25 25.5 17 22 Julier Lt 26.5 Neggia Lt Albula 25.5 Ablis Lt 22 TRACKSPORT 25.5 17 25.5 26.5 17 85 35 stiffness where it’s needed Roches 45 Pillon Fluela One gear, no brakes: track racing is arguably the purest expression of bicycle competition. Efficient aerodynamics and TRACKSPORT Umbrial Lt 26.5 26.5 17 smooth-rolling hubs are a necessity, so edco put our SuperT hubs – high-flange, track-specific hubs with oversize MOUNTAINSPORT 29 23 bearings – on one of our fast and stable rims from the AEROSPORT series to create our TRACKSPORT line. 33 26 Designed for speed and built to last, it’s the wheel of choice for Olympic champions and six-day professionals like 65 26 65 Wim Stroetinga and Nick Stöpler. edco also offers a bomb-proof fixed-gear wheel based on the SuperS hub and Optima Roches rim for endless kilometers of left-hand turns. Vorab XC 26 Combin AM Gesero Gesero model tire depth hub decal options Roches clincher tubeless ready 22mm SuperS WB, BB * available Summer '16 Gesero tubular 65mm SuperT WB, BB * available Summer '16 Fluela tubular 85mm SuperT WB, BB * available Summer '16 Decal options: WB = white on black, BB = black on black (see page 11 for more details). 9K-8mm twill weave When 9,000 strands of carbon fiber per bundle are hand-woven into a unique 8mm twill pattern, you get edco’s proprietary rim construction material: strong, stiff, and just 150 grams per square meter. Contact your local edco dealer for more details, or visit us online at www.edco-wheels.co.uk to learn more. 10 11 HUBS the heart of every wheel edco has designed and built hubs for a number of leading brands for more than 30 years. Precision-machined in Switzerland and hand-assembled in The Netherlands, every road hub employs our patented Multisys freehub body for compatibility with Shimano/SRAM and Campagnolo cassettes. edco-designed bearings mean years of ultra-smooth riding; a 5-point sealing system ensures minimum resistance and maximum protection. BEARINGS raising the standard Most premium hubs on the market today use ordinary industrial bearings, also known as cartridge bearings. While they offer a balance between performance, life, and cost, they’re designed for a broad range of uses and applications. Bicycle hubs are different, though. Operating at relatively low speeds, they not only require a tight seal against water and dirt, but also must withstand both radial and axial loads. edco has developed its own bearing specification with SKF to provide each hub with years of trouble-free, high-performance use. Lubrication, ball and raceway tolerances, seal design: everything is considered and tested – both in the lab and in the real world – before we put them in any edco hub. model hub used in spoke type freehub body standard axle axle options option parts SuperGfront OPTIMA J-Bend (radial) − 100mm QR − − SuperGrear OPTIMA J-Bend (2:1) Multisys w/Antibite 130mm QR − − PROSPORT DB 6-bolt adapter & SuperG FD front J-Bend (2 cross) − 100mm QR 12x100 TA OPTIMA DB axle kits PROSPORT DB SuperG FD rear J-Bend (2 cross) Multisys w/Antibite OPTIMA DB 130mm or 12x135 TA or 6-bolt adapter & 135mm QR 12x142 TA axle kits AEROSPORT Apterafront PROSPORT Straight Pull (radial) − 100mm QR – – AEROSPORT Apterarear PROSPORT Straight Pull (2:1) Multisys w/Antibite 130mm QR – – 100mm QR Apaxviafront MOUNTAINSPORT Straight Pull (4 cross) − 12x100 TA or 15x100 TA 12x135 TA or Apaxviarear MOUNTAINSPORT Straight Pull (4 cross) Shimano/SRAM w/Antibite 135mm QR 12x142 TA or 12x148 TA SuperS Track front TRACKSPORT Roches SuperS Track rear TRACKSPORT Roches SuperT Track front TRACKSPORT SuperT Track rear TRACKSPORT 6-bolt adapter & XD Driver J-Bend (radial) − 100mm bolt-on − − J-Bend (2 cross) Threaded Track Flip/Flop 120mm bolt-on − − J-Bend (radial) − 100mm bolt-on − − J-Bend (2 cross) Threaded Track 120mm bolt-on − − − − Victoryfront SUPERSPORT Sapim CX-Carbon − 100mm QR Victoryrear SUPERSPORT Sapim CX-Carbon Multisys w/Antibite 130mm QR 12 6-bolt adapter e d c o -s p ons k Stöp ored Nic ler at th e 2015 ationa Dutch N l C ha m p ionships . − 13 CASSETTEMONOBLOCK durable. lightweight. beautiful. edco’s Monoblock is, in a word, a piece of art: a single-piece cassette exquisitely machined from a solid block of cold-forged chromoly steel – then heat-treated, tumble-finished, and electroplated for added durability and low-friction operation. Shifting ramps and profiled teeth provide smooth and consistent shifts; its honeycomb design allows for maximum material removal while maintaining strength. Have a set of 10-speed wheels that you’d like to use with a new 11-speed group set? Monoblock’s design allows for engagement on a 10-speed freehub body. Just purchase and install edco’s 11-speed Monoblock cassette and our optional Ten+Eleven lock ring. Shimano/SRAM- and Campagnolo-compatible cassettes series rangeratios Shimano 10-Speed 11-2511-12-13-14-15-17-19-21-23-25 Shimano 10-Speed 12-2512-13-14-15-16-17-19-21-23-25 Shimano 10-Speed 11-2711-12-13-14-15-17-19-21-24-27 Shimano 10-Speed 12-2712-13-14-15-16-17-19-21-24-27 edco worked closely with 3AX Cycling to further improve and develop the world’s first clipless pedal that, by Shimano 10-Speed 11-2811-12-13-14-15-17-19-21-24-28 allowing just 2° of sway, gives feet the freedom to tilt sideways. Tested over a period of two years, 3AX pedals Shimano 10-Speed 11-2911-12-13-14-15-17-21-24-27-29 enable the lower part of the leg to automatically find the correct way to align with the knee and upper leg – Shimano 10-Speed 11-3211-12-13-14-15-16-18-21-24-32 without losing stability. Which means muscle output is used for speed rather than unnecessary friction. Shimano 11-Speed 11-2311-12-13-14-15-16-17-18-19-21-23 Shimano 11-Speed 11-2511-12-13-14-15-16-17-19-21-23-25 Shimano 11-Speed 12-2512-13-14-15-16-17-18-19-21-23-25 Shimano 11-Speed 11-2711-12-13-14-15-16-17-19-21-24-27 Shimano 11-Speed 12-2712-13-14-15-16-17-18-19-21-24-27 Shimano 11-Speed 11-2811-12-13-14-15-17-19-21-23-25-28 Shimano 11-Speed 12-2812-13-14-15-16-17-19-21-23-25-28 Shimano 11-Speed 11-2911-12-13-14-15-17-19-21-24-27-29 Shimano 11-Speed 11-3211-12-13-14-15-16-18-21-24-28-32 PEDALS3AX turning in all directions Shimano 11-Speed (Jr) 14-2514-15-16-17-19-20-21-22-23-24-25 Shimano 11-Speed (Jr) 14-2714-15-16-17-18-19-21-22-23-24-25 Campagnolo 11-Speed 11-2511-12-13-14-15-16-17-19-21-23-25 Campagnolo 11-Speed 12-2512-13-14-15-16-17-18-19-21-23-25 Campagnolo 11-Speed 11-2711-12-13-14-15-16-17-19-21-24-27 Campagnolo 11-Speed 12-2712-13-14-15-16-17-18-19-21-24-27 Campagnolo 11-Speed 11-2911-12-13-14-15-17-19-21-24-27-29 Campagnolo 11-Speed 11-3211-12-13-14-15-16-18-21-24-28-32 Single-piece chromoly construction. Lock ring included. red Ten+Eleven lock ring seriesapplication T-11 converts 11-tooth 10-speed wheels to 11-speed T-12 converts 12-tooth 10-speed wheels to 11-speed Shimano/SRAM-compatible only. 14 15 Visit w w w w.edco- heels.c additio o.uk for nal inform ation. SPONSORSHIP preferred by champions Pedal Heaven kit 2015 final design Pedal Heaven is a UCI Continental team, based in Fleet, Hampshire and achieved a fantastic 3rd place in the in the 2015 Pearl Izumi Tour Series using edco wheels. They are competing in all major UK races in 2016 and boast a strong line up including Ian Wilkinson & Alex Paton who also excels at cyclocross. edco AEROSPORT and OPTIMA are their wheels of choice. Metaltek-Kuota are a UK elite team who compete in the British Elite road and criterium series. They have consistently punched above their weight in previous years and with ex Cervelo Test Team rider Dan Fleeman on the roster, they always pose a threat. They ride edco PROSPORT and OPTIMA wheels. Lupus Racing Team is a professional UCI Continental racing team based in the USA and dedicated to raising awareness of and research funding for Lupus, an autoimmune disease that affects people worldwide. The team uses edco AEROSPORT, PROSPORT, and OPTIMA wheels for training and competition. A professional Women’s World Tour UCI racing team based in Belgium, LaresWaowdeals competes around the world in cycling’s most prestigious events. edco PROSPORT and AEROSPORT are their wheels of choice. WARRANTY we’re proud of our work edco warrants its products to be free from defects in materials or workmanship for a period of two years after the original purchase. edco will, at its discretion, repair or replace the edco product found to be defective based on the terms of this warranty. edco also reserves the right to provide a full refund in the amount stated on the original invoice or bill of sale. This warranty is non-transferable, applying only to the original owner and valid only when the original proof of purchase is provided. Claims under this warranty must be initiated through the retailer where the edco-equipped bicycle or the edco component was purchased. llin -axis dri edco’s 7 g . machine CRASHREPLACEMENT you’re covered In case of an accident or breakdown, the Edco Crash Program (ECP) will repair or replace your wheel at a reduced price. You can take advantage of the ECP only within the first 2 years after the original purchase and only if you’re the first owner. The ECP accepts wheels only when information regarding model, serial number, and a copy of your invoice are included. Find out more on our website www.edco-wheels.co.uk 16 UK Distributor : Cambrian Tyres Ltd North Parade Aberystwyth Wales. SY23 2JR 01970 626777 [email protected] www.edco-wheels.co.uk Edco Engineering BV Havendwarsstraat 1 5211 VA ’s-Hertogenbosch The Netherlands www.edco.ch r Whereve the road u. takes yo
Similar documents
Edco Wheels UK
With rounded wheels, he says the other brands claim that shape reduces crosswind drag, but Lew says his DET performs at
lower drag with a higher angle of attack than rims with a broad spoke face (i...