Z Z SWIFT Drawing Tree Drawing Number Part Description Quantity

Z Z SWIFT Drawing Tree Drawing Number Part Description Quantity

SWIFT Drawing Tree
Estimated Delivery
Drawing Number
CN_Visualization_C_9
Part Description
Assembly: Schieren Visualization System
Sub-Assembly: Camera
VZ_Camera_P_1
Camera
Development Kit
VZ_Iris_P_3
Post Holder 3" height
VZ_Iris_P_4
Steel Post 0.5"Dx3"L
Sub-Assembly: Light Source
Incandescent Flashlight Bulb (12V, 75mA)
E10 Lamp Base with Screw Terminals
VZ_LightSource_P_3
Lamp Base
VZ_LightSource_P_5
Lamp Cylinder
Sub-Assembly: Iris
VZ_Iris_P_1
Iris Mounted 30.8M OD
VZ_Iris_P_2
1/4-20 Female to 8-32 male
VZ_Iris_P_3
Post Holder 3" height
VZ_Iris_P_4
Steel Post 0.5"Dx3"L
Sub-Assembly: Primary/Seconary Lens
VZ_Lens_P_1_primary
Lens Ach 75x200 MgF2 TS
VZ_Lens_P_1_secondary
Lens Ach 75x400 MgF2 TS
VZ_Lens_P_2
English/Metric Adapter 2.5in sq
VZ_Lens_P_3
Metric Optic Mount 76.2mm ID
VZ_Lens_P_5
Post Holder 12mmDx50mmH W/M6
Sub-Assembly: Mirror
VZ_Mirror_P_1
Mirror 1/10 Wave 3"D
VZ_Mirror_P_2
3" Aperture with(2) AJS100-0.5K Actuators
VZ_Lens_P_4
Steel Post 12mmDx50mm
VZ_Lens_P_2
English/Metric Adapter 2.5in sq
VZ_Lens_P_5
Post Holder 12mmDx50mmH W/M6
Sub-Assembly: Knife Edge
VZ_KinfeEdge_P_1
MT3-1/2" XYZ Translation Stage
VZ_KinfeEdge_P_2
Knife Edge
VZ_KinfeEdge_P_3
Window Optcast 1" DIA Blue
VZ_KinfeEdge_P_4
Window Optcast 1" DIA Red
VZ_KinfeEdge_P_5
Interchange System
VZ_KinfeEdge_P_6
Knife Edge Mount
VZ_KinfeEdge_P_7
Color Filter Mount
Sub-Assembly: Cover 1
VZ_Cover1_C_14
VZ_Cover1_P_1
8" Aluminum tubing legs
VZ_Cover1_P_2
Black plexiglass- long sides, 3/16" thick
VZ_Cover1_P_3
Black/Clear plexiglass- short side, 3/16" thick
VZ_Cover1_P_4
Clear plexiglass top, 3/16" thick
VZ_Cover1_P_5
Black plexiglass lid, 3/16" thick
VZ_Cover1_P_6
6.58" Aluminum tubing side skeleton
VZ_Cover1_P_7
12.58" Aluminum tubing side skeleton
VZ_Cover1_P_8
L-bracket, 1x1", 1/16" thick, centered 1/4"holes
VZ_Cover1_P_9
Rubber sq chord stock, 1/8"
VZ_Cover1_P_10
L-bracket, 1x1x1/16", 1 off-center 1/4"holes
VZ_Cover1_P_11
L-bracket, 1x1x1/16", 1 off-center 1/4"holes
VZ_Cover1_P_12
1/4-20 screw 1" long, phillips, machine head, 82 degrees, Z
VZ_Cover1_P_13
Wing nut 1/4"-20, 1-3/32"x9/16"
VZ_Cover1_P_14
Handles
Sub-Assembly: Cover TS
VZ_CoverTS_C_7
VZ_CoverTS_P_1
Angled Aluminum
VZ_CoverTS_P_2
Angled Aluminum
VZ_CoverTS_P_3
Angled Aluminum
VZ_CoverTS_P_4
Black plexiglass- front/back, 3/16" thick
VZ_CoverTS_P_5
Black plexiglass- long sides, 3/16" thick
VZ_CoverTS_P_6
Black plexiglass- top, 3/16" thick
VZ_CoverTS_P_7
Handles
Sub-Assembly: Cover L
VZ_CoverL_C_14
VZ_CoverL_P_1
8" Aluminum tubing legs
VZ_CoverL_P_2
Black plexiglass- long sides, 3/16" thick
VZ_CoverL_P_3
Black/Clear plexiglass- short sides, 3/16" thick
VZ_CoverL_P_4
Black plexiglass lid, 3/16" thick
VZ_CoverL_P_5
Clear plexiglass top, 3/16" thick
VZ_CoverL_P_6
16.58" Aluminum tubing side skeleton
VZ_CoverL_P_7
12.58" Aluminum tubing side skeleton
VZ_CoverL_P_8
L-bracket, 1x1x1/16", 1 off-center 1/4"holes
VZ_CoverL_P_9
Rubber sq chord stock, 1/8"
VZ_CoverL_P_10
L-bracket, 1x1x1/16", 1 off-center 1/4"holes
VZ_CoverL_P_11
L-bracket, 1x1x1/16", 1 off-center 1/4"holes
VZ_CoverL_P_12
1/4-20 screw 1" long, phillips, machine head, 82 degrees, Z
VZ_CoverL_P_13
Wing nut 1/4"-20, 1-3/32"x9/16"
VZ_CoverL_P_14
Handles
Assembly: Nozzle and Test Section
CN_Nozzle_C_2
Sub-Assembly:Test Section
NZ_TestSection_C_2b
NZ_TestSection_P_1
Plexiglass
NZ_TestSection_P_2
Steel Nozzle
NZ_TestSection_P_3_Diamond
Plexiglas Diamond Cross Section
NZ_TestSection_P_3_Bunt
Plexiglas Blunt Nose Wedge Cross Section
NZ_TestSection_P_3_Wedge
Plexiglas Wedge Cross Section
Sub-Assembly: Contection to Gas
NZ_CONTOGS_C_7
NZ_CONTOGS_P_1
Steel Flange
NZ_CONTOGS_P_2
NPT to Test Section Adapter
Quantity
Make/Buy
1
1
0
0
Buy
Buy
Buy
Buy
1
1
1
1
Buy
Buy
Manufacture
Manufacture
1
1
2
2
Vendor
Part Number
PointGrey
PointGrey
Edmund
Edmund
DR2-HICOL-CS
DR2-DEVKIT
NT03-647
NT36-497
Buy
Buy
Buy
Buy
Edmund
Edmund
Edmund
Edmund
1
1
3
2
3
Buy
Buy
Buy
Buy
Buy
1
1
1
0
0
Buy
Buy
Buy
Buy
Buy
1
1
1
1
1
Buy
Buy
Buy
Buy
Manufacture
Manufacture
Manufacture
4
2
2
1
1
2
2
8
1
3
3
48
4
3
Unit Cost
Total Cost
845.00
100.00
14.30
9.75
845.00
100.00
14.30
9.75
NT53-914
NT53-930
NT03-647
NT36-497
49.00
5.50
14.30
9.75
49.00
5.50
14.30
9.75
Edmund
Edmund
Edmund
Edmund
Edmund
NT45-417
NT45-419
NT55-385
NT56-763
NT56-906
144.90
144.90
18.90
64.50
32.80
144.90
144.90
37.80
129.00
65.60
Edmund
Newport
Edmund
Edmund
Edmund
NT32-103
U300-A2K
NT54-936
NT55-385
NT56-906
289.00
186.00
9.90
18.90
32.80
289.00
186.00
9.90
37.80
32.80
Thorlabs
Home Depot
Edmund
Emdund
MT3
778.00
10.00
6.60
6.60
778.00
10.00
6.60
6.60
Buy
Buy
Buy
Buy
Buy
Buy
Buy
Make
Buy
Make
Make
Buy
Buy
Buy
Online metals
CO Plastics
CO Plastics
CO Plastics
CO Plastics
Online metals
Online metals
Online metals
McMaster Carr
Online metals
Online metals
McMaster Carr
McMaster Carr
McGuckins
6063 T52
scraps
scraps
scraps
scraps
6063 T52
6063 T52
6061 T6
9700K12100
6061 T6
6061 T6
90273A542
90866A029
45046
0.70
2.75
1.38
1.38
2.75
0.70
1.40
0.15
1.59
0.15
0.15
8.96
8.53
1.34
2.80
5.50
2.75
1.38
2.75
1.40
2.80
1.20
1.59
0.45
0.45
8.96
8.53
4.02
4
2
2
2
2
1
1
Buy
Buy
Buy
Buy
Buy
Buy
Buy
Online metals
Online metals
Online metals
CO Plastics
CO Plastics
CO Plastics
McGuckins
6063 T52
6063 T52
6063 T52
scraps
scraps
scraps
45046
0.80
0.40
1.40
2.75
2.75
2.75
1.34
3.20
0.80
2.80
5.50
5.50
2.75
1.34
4
2
2
1
1
2
2
4
1
3
4
48
4
3
Buy
Buy
Buy
Buy
Buy
Buy
Buy
Make
Buy
Make
Make
Buy
Buy
Buy
Online metals
CO Plastics
CO Plastics
CO Plastics
CO Plastics
Online metals
Online metals
Online metals
McMaster Carr
Online metals
Online metals
McMaster Carr
McMaster Carr
McGukins
6063 T52
scraps
scraps
scraps
scraps
6063 T52
6063 T52
6061 T6
9700K12100
6061 T6
6061 T6
90273A542
90866A029
45046
0.70
2.75
1.38
2.75
2.75
0.70
0.70
0.15
2.12
0.15
0.15
8.96
8.53
1.34
2.80
5.50
2.75
2.75
2.75
1.40
1.40
0.60
2.12
0.45
0.60
8.96
8.53
4.02
12
1
1
4
4
4
1
13
1
Make
Buy
Buy
Make
Make
Make
Make
Make
Make
NT43-936
NT43-942
Allocated Money?
Ordered
Actual Delivery
Estimated Fabrication Competion Date
Actual Fabrication Completion
Date
NZ_CONTOGS_P_3
NZ_CONTOGS_P_4
NZ_CONTOGS_P_5
NZ_CONTOGS_P_6
NZ_CONTOGS_P_7
CN_Settling Tank_C_
ST_SettlingTank_C_2
ST_SettlingTank_P_1_600
ST_SettlingTank_P_2
ST_ReliefValve_C_2
ST_ReliefValve_P_1
ST_Sensors_C_3
ST_Sensors_P_1_Pressure
ST_Sensors_P_1_Temp
ST_Sensors_P_2
ST_Sensors_P_3
CN_Gas_C_5
GS_CommercialTank_C_4
GS_CommercialTank_P_1
GS_CommercialTank_P_2
GS_CommercialTank_P_3
GS_CommercialTank_P_4
1/8"x2" Allen Key Bolt
1/8"x1" Allen Key Bolt
1/8" Nut
1/8" Washer
1/4" Bolts
Assembly: Settling Tank and Instruments
Sub-Assembly: Settling Tank
Four Cubic Foot 600psi Settling Tank
Tank Craddle and Mounting to Cart
Sub-Assembly: Relief Valve
Relief Valve
Sub-Assembly:Sensors
Pressure Transducer
Thermocouple Probe
Connection to LabView
Connection to Settling Tank
Assembly: All Gas Assemblies
Sub-Assembly: Commercial Tanks
Commercial 2300psi Nitrogen Tanks
Commercial 2300psi Nitrogen Tanks
Commercial 2300psi Nitrogen Tanks
240
240
240
480
6
Buy
Buy
Buy
Buy
Buy
1
1
1
1
1
2
Buy
Buy
Buy
Buy
Buy
Buy
Buy
Buy
Buy
12
Buy
4
1
Buy
Buy
AirGas
Swagelok
108"
Buy
Airgas
8R-4
4
Buy
5
1
Buy
Buy
Swagelok
Swagelok
Swagelok
Swagelok
Swagelok
Swagelok
McMaster-Carr
McMaster-Carr
Body:SS-QC4-B53.70
214.80
Body:SS-QC4-B-400,Stem:SS-QC4-D-401
Body:SS-QC4-B-400,Stem:SS-QC4-D-402
Body:SS-QC4-B-400,Stem:SS-QC4-D-403
Body:SS-QC4-B-400
Stem:SS-QC4-D-403
6.64
33.25
40.25
40.25
1
Commercial 2300psi Nitrogen Tanks
GS_CommercialTank_P_2
Connection to 1/4" Male Tubing
GS_CommercialTank_P_4
1/4" Tubbing from Tanks to Manifold
Sub-Assembly: Manifold
GS_Manifold_C_15
GS_FlexTube_P_1
Flextubing Connecting Tanks And Manifold
GS_FlexTube_P_2
Flextubing Connecting Tanks And Manifold
GS_FlexTube_P_3
Flextubing Connecting Tanks And Manifold
GS_FlexTube_P_4
Flextubing Connecting Tanks And Manifold
GS_QuickConnect_C_2_CON1
Quick Connect Between Flextube and manifold
GS_QuickConnect_C_2_CON2
GS_QuickConnect_C_2_CON3
GS_QuickConnect_C_2_CON4
GS_QuickConnect_P_1
Quick connect Body
GS_QuickConnect_P_2
Quick connect Stem
GS_Nipple_C
Nipple for Connecting T's and L's
GS_Quarterpipe_P_2
SS 1/4" Pipe
GS_Quarterpipe_P_3
GS_Quarterpipe_P_4
GS_Valve1_P_1
1/4" Needle Valve
Sub-Assembly: Pressure Regulator
GS_Regulator_C_2
GS_Regulator_P_1
Stainless- Steel Pressure Regulator
GS_Regulator_P_2
Sub-Assembly: On/Off Valve 1
GS_On/OffOne_C_2
GS_On/OffOne_P_1
Stainless Steel 1/4" On/Off Needle Valve
Sub-Assembly: On/Off Valve 2
GS_Valve2_C_27
GS_Valve2_P_1
Unknown Valve Part
GS_Valve2_P_2
Unknown Valve Part
GS_Valve2_P_3
Unknown Valve Part
GS_Valve2_P_4
Unknown Valve Part
GS_Valve2_P_5
Unknown Valve Part
GS_Valve2_P_6
Unknown Valve Part
GS_Valve2_P_7
Unknown Valve Part
GS_Valve2_P_8
Unknown Valve Part
GS_Valve2_P_9
Unknown Valve Part
GS_Valve2_P_10
Unknown Valve Part
GS_Valve2_P_11
Unknown Valve Part
GS_Valve2_P_12
Unknown Valve Part
GS_Valve2_P_13
Unknown Valve Part
GS_Valve2_P_14
Unknown Valve Part
GS_Valve2_P_15
Unknown Valve Part
GS_Valve2_P_16
Unknown Valve Part
GS_Valve2_P_17
Unknown Valve Part
GS_Valve2_P_18
Unknown Valve Part
GS_Valve2_P_19
Unknown Valve Part
GS_Valve2_P_20
Unknown Valve Part
GS_Valve2_P_21
Unknown Valve Part
GS_Valve2_P_22
Unknown Valve Part
GS_Valve2_P_23
Unknown Valve Part
GS_Valve2_P_24
Unknown Valve Part
GS_Valve2_P_25
Unknown Valve Part
GS_Valve2_P_26
Unknown Valve Part
GS_Valve2_P_27
Unknown Valve Part
Sub-Assembly: Piping
GS_Pipe_P_1
1/4" Stainless Steel Piping
GS_Pipe_P_2
1" Brass Tubing
Assembly: Cart
CN_Cart_C_
Sub-Assembly: BreadBoard
CRT_BreadBoard_C_2
CRT_BreadBoard_P_1
Bread Board
CRT_BreadBoard_P_2
Connector to Cart
Sub-Assembly: Caster
CRT_Caster_C_2
CRT_Caster_P_1
Caster
CRT_Caster_P_2
Mount to Cart
Assembly: Sound Booth
CN_SoundBooth_C_2
Sub-Assembly: Box
SB_Box_C_8
SB_Box_P_1
1/4" Plexiglass Left Sound Booth Box Wall
SB_Box_P_3
1/4" Plexiglass Top Sound Booth Box Wall
McMaster-Carr
Sun Source
Omega
Omega
V66-MF-8N-BN-B
PX302-1KGV
TC-K-NPT-G-72
254.00
AirGas
AirGas
AirGas
AirGas
0.19
20.52
1
Buy
Swagelok
SS-1RS4
53.00
53.00
1
Buy
GeneralAir
Victor 4493646
270.00
270.00
1
1
Buy
Buy
SwageLok
SwageLok
SS-1RS4
B-65TS16
53.00
172.00
53.00
172.00
Buy
Buy
McMaster-Carr
McMaster-Carr
Buy
Buy
Campus
1
1
S-526-DB
4
Buy
Buy
1
1
Make
Make
Colorado Plastics
Colorado Plastics
/4" Clear Plexiglass
/4" Clear Plexiglass
0.00
0.00
48.78
208.54
11/1/2006
SB_Box_P_4
SB_Box_P_5
SB_NoiseFoam_P_1
SB_NoiseFoam_P_2
SB_NoiseFoam_P_3
SB_SheetMetal_P_1
SB_Slider_C_3
SB_Slider_P1
SB_Slider_P2
SB_Slider_P3
1/4" Plexiglass Front Sound Booth Box Wall to Test Section
1/4" Plexiglass Top L-Break Sound Booth Box Wall
1/8" SoundBlocker 1 Vinyl
1" Noise Foam
1" Noise Foam
1/16" Stainless Steel Sheet Metal
Sub-Assembly: Slides
Slider Outside
Slider Inside
Slider L-Bracket
1
1
1
1
1
1
Make
Make
Buy
Buy
Buy
Make
2
2
8
Buy
Buy
Buy
Colorado Plastics
/4" Clear Plexiglass
Colorado Plastics
/4" Clear Plexiglass
www.SoundSuckers.co 1/8" SoundBlocke
$250
www.SoundSuckers.co 2' x 4' - GK™ Me
19.00
www.SoundSuckers.co 1/8" SoundBlockeN/A
N/A
Mcgukins
2' x 3' - 1/16" Sheet Metal
Mcgukins
250.00
19.00
26.25
41.57
2.70
1.47
6.08
3.25
1.06
29.07
36.60
2.50
1.00
24
.00
39.39
.00
36
36.00
38.00
0.25
1.00
30.00
24.00
27.22
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF SWIFT IS PROHIBITED.
MATERIAL
USED ON
NEXT ASSY
APPLICATION
5
4
NAME
DATE
DRAWN
Murphy C.
12/3/06
CHECKED
Springer D.
12/4/06
TITLE:
ENG APPR.
Entire Cart Assembly
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
SHEET 1 OF 1
SCALE: 1:20 WEIGHT:
DO NOT SCALE DRAWING
3
CN_Cart_C_50
2
REV
1
31.955
2.023
2.023
14.978
15.673
4.023
14.023
+0.50
13.35 - 0.50
3.023
3.023
14.978
15.673
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.005
THREE PLACE DECIMAL 0.005
DRAWN
NAME
DATE
ALT K.
4 Dec.
CHECKED
TITLE:
ENG APPR.
Visualization Assembly
MFG APPR.
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:10 WEIGHT:
DO NOT SCALE DRAWING
3
CN_Visualization_C_9
1
13.74
8.13
8.49
11.98
5.48
12.01
4.38
5.25
3.27
4.77
12.81
7.44
5.23
6.50
6.48
3.48
4.03
7.19
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
DRAWN
NAME
DATE
ALT K.
4 Dec.
CHECKED
TITLE:
Visualization Assembly No Cover
ENG APPR.
MFG APPR.
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:10 WEIGHT:
DO NOT SCALE DRAWING
3
CN_Visualization_No_Cover
1
2.13
4.98
0.25
0.16
2.01
0.06
2.13
3
0.1
2.13
2.13
6.10
4.60
5.02
6.10
0.16
0.13
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: 0.01
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF SWIFT IS PROHIBITED.
MATERIAL
DATE
DRAWN
11/30/06
CHECKED
Springer D.
12/3/06
USED ON
NEXT ASSY
4
Visualization Light
Source Encasement
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
VZ_LightSource_C_1
SCALE: 3
DO NOT SCALE DRAWING
3
TITLE:
ENG APPR.
Aluminium 3030
APPLICATION
5
NAME
Clement J.
2
REV
SHEET 1 OF 1
WEIGHT:
1
0.25
2.01
1
0.
2.01
1.51
3
2.01
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL .01
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
NAME
DATE
DRAWN
Clement J.
11-25-06
CHECKED
Springer D.
11-25-06
ENG APPR.
TITLE: Base to secure the light mount
to the breadboard
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
VZ_LightSource_P_3
A
FINISH
3
SHEET 1 OF 1
SCALE: 1:1 WEIGHT:
DO NOT SCALE DRAWING
2
REV
1
1)Lense is held by
threaded ring
2)Post threads into lense
holder
3)Post held in post-holder
by set screw
4)Post-holder screws into
optical bench interface
plate
1
2
3
3.94
3.00
4
0.96
1.89
0.47
1.97
0.87
0.50
2.50
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: N/A (Purchased)
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
NAME
DRAWN
2.50
DATE
Clement J. 12/03/06
TITLE: Lens and Post Holder assembly
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
VZ_Lens_C_5
SHEET 1 OF 1
SCALE: 1:5 WEIGHT:
DO NOT SCALE DRAWING
3
REV
2
1
0.591
0.787
0.591
0.059
0.157
2.146
0.079
0.059
0.502
1.004
1.575
1.506
0.790
0.502
4.157
0.591
4.157
0.787
0.790
1.575
1.004
0.984
0.984
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: N/A
FRACTIONAL .
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
NAME
DATE
DRAWN
Clement J.
12-3-06
CHECKED
Springer D.
12-3-06
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
Interchange Assem
A
Various
USED ON
NEXT ASSY
APPLICATION
4
TITLE: Full ray detection
interchange system in an
exploded view/
FINISH
3
SHEET 1 OF 1
SCALE: 1:2 WEIGHT:
DO NOT SCALE DRAWING
2
REV
1
0.157
0.591
0.984
1.575
0.790
0.394
1.575
2.146
1.004
0.251
0.079
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL .01
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
NAME
DATE
DRAWN
Clement J.
12-3-06
CHECKED
Springer D.
12-3-06
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
VZ_KnifeEdge_P_7
A
Aluminum 6064
USED ON
NEXT ASSY
APPLICATION
4
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:1 WEIGHT:
DO NOT SCALE DRAWING
3
TITLE: A mount to hold the color filters in
place and allow mounting to the
interchange mount
1
20
20
105.60
48.04
25
15
8
3
.
25
6
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL .01
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
NAME
DATE
DRAWN
Clement J.
12-3-06
CHECKED
Springer D.
12-3-06
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
VZ_KnifeEdge_P_5
A
Aluminum 6064
USED ON
NEXT ASSY
APPLICATION
4
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:2 WEIGHT:
DO NOT SCALE DRAWING
3
TITLE: Mount to hold the knife edge and
color filter frames to the 3-axis mount
1
0.591
0.591
1.575
1.575
0.394
0.197
0.2
5
1
1.575
0.790
0.394
0.079
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL .01
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
NAME
DATE
DRAWN
Clement J.
12-3-06
CHECKED
Springer D.
12-3-06
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
VZ_Razor Interchange
A
Aluminum 6064
USED ON
NEXT ASSY
APPLICATION
4
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:1 WEIGHT:
DO NOT SCALE DRAWING
3
TITLE: Razor blade mount to secure
to the interchange mount
1
0.25
0.47
1.21
TRUE R0.61
TRUE R0.02
0.16
TRUE R0.39
0.13
0.50
1.00
2.60
3.01
5
1.00
0.25
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: N/A
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF SWIFT IS PROHIBITED.
MATERIAL
USED ON
NEXT ASSY
APPLICATION
5
4
NAME
DATE
DRAWN
Clement J.
11/30/06
CHECKED
Springer D.
12/3/06
ENG APPR.
0.20
0.2
2.46
0.50
0.16
0.08
2.93
0.38
0.20
0.31
0.25
TITLE:
Iris Assembly
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A VZ_Iris_C_4
FINISH
3
SHEET 1 OF 1
SCALE: 1:2 WEIGHT:
DO NOT SCALE DRAWING
2
REV
1
2.50
2.29
3.98
1.86
98
99
97
96
111
2.07
0.45
1.50
1.50
2.00
6.35
1.50
96: Regulator
97: Needle Valve
98: 1/4" NPT SS Elbow
99: 1/4" NPT SS Pipe
111: Manafold
2.29
10.70
14.58
2.00
0.45
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF SWIFT IS PROHIBITED.
DATE
DRAWN
12/3/06
CHECKED
Springer D.
12/4/06
USED ON
NEXT ASSY
4
TITLE:
ENG APPR.
Plumbing System Prior
to Settling Tank
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
MATERIAL
APPLICATION
5
NAME
McNeill D.
A
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:20 WEIGHT:
DO NOT SCALE DRAWING
3
CN_Plumbing_C_11
1
1.92
0.98
1.50
1.50
0.97
0.18
2.32
0.25
Note: All parts in this diagram are
threaded together with 1/4 inch
NPT fittings.
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: N/A (Purchased)
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
NAME
DATE
DRAWN
Clement J.
12-3-06
CHECKED
Springer D.
12-3-06
ENG APPR.
TITLE: Four input manifold to merge 4
source tanks into a single line.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
REV
GS_Manifold_C_15 Exploded
A
FINISH
3
SHEET 1 OF 1
SCALE: 1:5 WEIGHT:
DO NOT SCALE DRAWING
2
1
2.56
0.71
0.26
3.88
1.41
0.25
0.2
0.25
4.00
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: 0.01
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF
SWIFT IS PROHIBITED.
INTERPRET GEOMETRIC
TOLERANCING PER:
5
MATERIAL
NAME
DATE
DRAWN
Murphy C.
11/28/06
CHECKED
Springer D.
12/3/06
USED ON
APPLICATION
4
Flange adapter for connecting the test
section to a 1" male NPT pipe
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
NZ_Flange_C3
2
REV
SHEET 1 OF 1
SCALE: 1:5 WEIGHT:
DO NOT SCALE DRAWING
3
TITLE:
ENG APPR.
Carbon Steel
NEXT ASSY
4.00
6.75
3.30
1.75
7
3.50
PROPRIETARY AND CONFIDENTIAL
6
0.1
0.25
4.00
0.25
1.25
1.13
3.05
1.00
1.75
0.26
1.41
1.13
0.71
1
0.50
0.25
1.88
8.38
7.50
0.11
0.50
0.63
0.64
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: 0.01
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
MATERIAL: Acrylic
USED ON
NEXT ASSY
APPLICATION
4
NAME
DATE
DRAWN
Murphy C. 12/01/06
CHECKED
McNeill D. 12/03/06
TITLE: Mach 2 Nozzle Acrylic Siding
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:3 WEIGHT:
DO NOT SCALE DRAWING
3
NZ_TestSection_P1
1
3.00
2.03
1.00
0.20
1.84
0.25
0.13
1.63
0.11
0.06
0.28
1.00
8.50
2.00
1.13
0.38
0.50
0.25
0.70
0.41
1.13
0.27
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES: 0.01
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
SWIFT. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
SWIFT IS
PROHIBITED.
5
MATERIAL
USED ON
NEXT ASSY
APPLICATION
4
NAME
DRAWN
DATE
Murphy C.
TITLE: Mach 2 Steel Structure
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
SIZE DWG. NO.
A
FINISH
2
REV
SHEET 1 OF 1
SCALE: 1:3 WEIGHT:
DO NOT SCALE DRAWING
3
NZ_TestSection_P2
1
.282
.400
.031
.088
R.112
.224
.200
.250
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.001
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Mach 2.0 and 2.5 Scale 22-Calaper
Bullet
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 4:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
NZ_TestObject_P_1
2
1
.169
.239
.070
R.067
.031
.134
.250
.100
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.001
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Mach 1.0 Scale 22-Calaper Bullet
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
NZ_TestObject_P_2
Acrylic
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
REV
3
SHEET 1 OF 1
SCALE: 4:1 WEIGHT:
DO NOT SCALE DRAWING
2
1
1.496
1.500
.031
.264
10.00°
4.00°
.200
.250
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.001
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Mach 2.0 and 2.5 Dimond Airfoil
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 2:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
NZ_TestObject_P_3
2
1
.764
.766
.031
.135
10.00°
4.00°
.100
.250
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.001
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Mach 1.0 Dimond Airfoil
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 2:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
NZ_TestObject_P_4
2
1
.634
15.00°
.031
.340
.117
.200
.250
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.001
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Mach 2.0 and 2.5 Wedge
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 2:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
NZ_TestObject_P_5
2
1
.250
.031
15.00°
.134
.035
.100
.250
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DATE
DRAWN
TITLE:
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 4:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
NZ_TestObject_P_6
2
1
Acrylic
GK Melamine Foaml
SoundBlocker1 Vinyl
1/16" Stainless Steel
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Exploded
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 1:1 WEIGHT:
DO NOT SCALE DRAWING
3
REV
SB_Box_C_8
2
1
9.00
5.00
.25
.06
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.01
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Top Box
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A SB_Box_P_1
FINISH
USED ON
NEXT ASSY
APPLICATION
4
REV
3
SHEET 1 OF 1
SCALE: 1:4 WEIGHT:
DO NOT SCALE DRAWING
2
1
9.00
5.00
.25
.06
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.01
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Bottom Box
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
FINISH
A SB_Box_P_2
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 1:4 WEIGHT:
DO NOT SCALE DRAWING
3
REV
2
1
.25
.25
1.00
.25
6.00
1.00
9.00
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER: 0.01
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Front Box to
Test Section
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A SB_Box_P_3
FINISH
USED ON
NEXT ASSY
APPLICATION
4
REV
3
SHEET 1 OF 1
SCALE: 1:4 WEIGHT:
DO NOT SCALE DRAWING
2
1
.25
5.00
5.50
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Side Box
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
Acrylic
A SB_Box_P_4
FINISH
USED ON
NEXT ASSY
APPLICATION
4
REV
3
SHEET 1 OF 1
SCALE: 1:4 WEIGHT:
DO NOT SCALE DRAWING
2
1
R1.65
.06
R.69
R.56
R.75
.25
1.50
3.10
5.63
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
0.01
INTERPRET GEOMETRIC
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
NAME
DRAWN
DATE
Osborn 12/04/06
TITLE: Sound Booth Sheet Metal
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
MATERIAL
SIZE DWG. NO.
1/16" SS
A
FINISH
USED ON
NEXT ASSY
APPLICATION
4
SHEET 1 OF 1
SCALE: 1:4 WEIGHT:
DO NOT SCALE DRAWING
3
REV
SB_SheetMetal_P_1
2
1
Maximum Operating Pressure: 3000 psi
Maximum Operating Pressure: 700 psi
G-1
E-1
NC-1
T-1
NC-1
T-2
NC-1
PR-1
T-3
G-2
SS ¼” Pipe
E-2
NV-1
Exst-1
QD-1
QD-2
QD-3
QD-4
S 1" Pipe
E-5
Test Section
BV-1
SS ¼” Pipe
Flange 1
S 1" Pipe
E-3
TH-1
TH-2
TH-3
TH-4
E-4
Settling Tank
RV-1
Commercial Tank 1
Commercial Tank 2
Commercial Tank 3
Commercial Tank 4
Commercial Tank 1:4: Commercially Pressurized Nitrogen Tanks to 2300psi
TH-1:4: Thermoplastic Hose
QD-1:4: Instrumentation Quick Disconnect
E-1: Stainless Steel ¼” Female NPT Elbow
NC-1: Stainless Steel ¼” NPT Nipple Connector
T-1:4: Stainless Steel ¼” Female NPT Tee
SS ¼” Pipe: Stainless Steel ¼” Male NPT Pipe
G-1: Pressure Regulator Gauge Rated to 5000psi
G-2: Pressure Regulator Gauge Rated to 1000psi
PR-1: Pressure Regulator
Exst-1: Pressure Regulator Exhaust Valve
NV-1: Brass Needle Valve
E-2:3: Stainless Steel ¼” Female NPT Elbow
Settling Tank: ASME Rated Commercially Purchased Pressure Vessel
RV-1: Relief Valve
E-4:5: Steel 1" Female NPT Elbow
S 1" Pipe: Steel 1" Male NPT Pipe
BV-1: Brass Ball Valve
Flange 1: Custom Flange Connection to Test Section
Test Section: Custom Carbon Steel and Acrylic Combination
Electrical Drawing Tree
Drawing Name
Light
Camera
Drawing Desription
Light Connections
Camera Connections
Comments
LS outlet
IEEE 1394
Drawn By
Katelynn
Katelynn
Comments
Written By
Katelynn
Estimated
Actual
Delivery
Checked By Delivery
Josh
11/29/2006
11/29/2006
Josh
11/29/2006
11/29/2006
Software Drawing Tree
Function Name
Prototype_Capture_F1
WT_WindTunnel_F1
WT_Camera_SF1
WT_Temperature_SF2
WT_Pressure_SF3
Function Description
Prototype of Camera Capture Program
DAQ program
Imaging Sub-Function
Temperature Sub-Function
Pressure Sub-Fuction
Katelynn
Charlie
Charlie
Estimated
Actual
Checked By Completion Completion
Darren
11/6/2006
11/6/2006
3/16/2006
3/9/2006
3/9/2006
3/9/2006