y00r0919:1.cylinder block
Transcription
y00r0919:1.cylinder block
Spare parts catalog- Yanmar engines (A)=2QM20 (B)=3QM30 (C)=2QM (D)=3QM Y00R0919 Y00R0919 1.CYLINDER BLOCK (A)=2QM20 (B)=3QM30 (C)=2QM Fig.1.CYLINDER BLOCK REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 5 5-1 6 6-1 7 23414-120000 2 (A=*1976.11) 2 124450-01210 2 2 2 11 12 12-1 2 2 2 15 16 20 21 22 2 2 2 23 24 25 2 2 2 27 28 29 29-1 29-2 30 31 31-1 32 33 33-1 724465-02500 721250-02500 124460-02150 26116-100252 22217-100000 121250-02100 124550-01900 22312-080160 23887-100002 23883-100002 2 (A=EXXX) (B=EXXX) 2 121250-01990 124160-01910 2 2 124772-01400 2 124160-34842 34 35 36 2 2 2 37 38 39 2 2 1 121250-01791 24321-000350 26116-080352 124450-01960 124450-01980 724770-01900 1 (D) (E) I R (F) 1 1 1 1 1 GASKET 12, ROUND GASKET 12, ROUND 1 1 1 1 N 1 1 1 1 1 Z (C=*1976.11) 4 STUD, CYL. HEAD STUD, CYL. HEAD STUD, CYL. HEAD NUT, CYL. HEAD WASHER PLUG 40 PLUG 40 (C=EXXX) 4 7 1 9 1 1 7 1 9 6 1 1 8 1 1 6 1 1 8 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 N W (D=EXXX) 1 1 1 1 1 2 2 2 5 5 1 5 5 1 2 2 2 1 4 3 1 4 1 1 4 3 1 3 1 3 1 3 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N 1 1 1 1 N 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 5 5 1 5 5 1 1 4 1 N (D=EXXX) GASKET PLUG PT1/4 COVER GASKET GASKET FLANGE FLANGE 7 1 1 7 (D=EXXX) HOUSING ASSY,BEARING HOUSING ASSY GASKET BOLT M10X 25 PLATED SPRING WASHER 10 MEIN METAL BUSH, REGURATOR PARALLEL PIN 8X 16 PLUG 10 PLUG 10 124160-34843 2 (A=EXXX) (B=EXXX) (C=EXXX) 2 124160-34844 GASKET (A=EXXX) (B=EXXX) (C=EXXX) 2 26116-080162 BOLT 8X16 2 22212-080000 SPRING WASHER 8 22217-080000 SPRING WASHER 8 2 (A=EXXX) (B=EXXX) (C=EXXX) 2 22312-040100 PARALLEL PIN 4X10 121250-01520 2 2 121250-01522 (A=EXXX) 1 (C) (C=*1976.11) 43400-500410 SEAL WASHER 8S 2 2 124060-01050 PLUG PT1/8 (A=EXXX) (B=EXXX) (C=EXXX) 2 2 2 26 124450-01220 124450-01230 124450-01250 124450-01240 27231-400000 27233-400000 BLOCK ASSY, CYLINDER BLOCK ASSY, CYLINDER PLUG PF1/4,HEX. PLUG PT1/4 (A=EXXX) (B=EXXX) (C=EXXX) 2 26216-080222 STUD M 8X 22 PLATED 2 26716-080002 NUT M 8 17 18 19 25-1 724465-01561 721370-01560 23897-020002 124160-01910 2 (A=*1976.11) 2 23414-120000 8 9 10 13 14 Remarks (1)CYL.BLOCK ASSY FOR 2QM OR 2QM20 CONTAINS THE ABOVE-MENTIONED PART FROM REF.NO.33 UP TO REF.NO.38 AS EXTRAS IN ORDER TO MAKE THE ASSY INTERCHGEABLE WITH CYL.BLOCK ASSY OF TORACTOR. THUS,PAY MUCH ATTEN -TION TO THIS REGARD AT THE TIME OF REPAIRRING OR REASSEMBLY. PLEASE BE SURE TO REMOVE. (2)REFER TO FIG.6 FOR ILLUSTRATED. (3)OPTIONAL(SELECTION USE PARATS) 1 2 2 (B) (D=EXXX) (D=EXXX) N (D=EXXX) 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 2 1 1 2 1 1 N 1 1 (C=EXXX) CAP W/DIPSTICK O-RING 1A G-35.0 BOLT M 8X 35 PLUG M14X15 GASKET LINER W/PACKING, CYL 3 3 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 1.CYLINDER BLOCK (A)=2QM20 (B)=3QM30 (C)=2QM Fig.1.CYLINDER BLOCK REF. 41 42 42-1 43 43-1 LEV. 2 1 1 PARTS NO. 124550-01300 124750-01331 124772-01330 (A=*1976.12) 1 121370-01330 1 121370-01331 1 1 48 48-1 2 2 (A=EXXX) 49 50 51 51-1 52 52-1 53 2 2 1 724772-01540 721370-01540 23884-160002 23883-160002 PACKING, LINER GASKET, CYL. HEAD GASKET, CYL. HEAD (C=EXXX) FLANGE, MOUNTING FLANGE, MOUNTING (B=E/#81052) Remarks (1)CYL.BLOCK ASSY FOR 2QM OR 2QM20 CONTAINS THE ABOVE-MENTIONED PART FROM REF.NO.33 UP TO REF.NO.38 AS EXTRAS IN ORDER TO MAKE THE ASSY INTERCHGEABLE WITH CYL.BLOCK ASSY OF TORACTOR. THUS,PAY MUCH ATTEN -TION TO THIS REGARD AT THE TIME OF REPAIRRING OR REASSEMBLY. PLEASE BE SURE TO REMOVE. (2)REFER TO FIG.6 FOR ILLUSTRATED. (3)OPTIONAL(SELECTION USE PARATS) 60 61 1 1 62 63 64 1 1 1 65 65-1 1 1 (A=EXXX) 26226-120252 26716-120002 124772-01610 26116-100382 22137-100000 22212-100000 22217-100000 (B=EXXX) 124770-03200 101147-59810 23414-080000 124550-51950 124550-51951 66 67 68 1 1 1 69 69-1 1 1 (A=*1978.06) 70 70-1 1 1 (C=E/#81097) 73 74 1 1 1 6 4 1 1 6 (E) I R (F) N 1 1 N (C=EXXX) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N (D=EXXX) 1 1 1 1 N 1 1 1 1 N (D=EXXX) 16 20 16 20 16 16 1 20 20 1 16 16 1 20 20 1 1 1 1 1 1 1 S 1 1 1 1 1 1 2 2 2 2 2 2 2 2 1 9 9 1 9 9 1 9 9 1 9 9 9 9 9 9 9 9 9 9 1 1 2 1 1 2 1 1 2 1 1 2 N (D=E/#81061) STUD M12X 25 PLATED NUT 12 GASKET BOLT M10X 38 PLATED WASHER 10,POLISHED WASHER, 10 SPRING WASHER 10 N (D=EXXX) PIPE, BREATHER BOLT 8, PIPE JOINT GASKET 8, ROUND SHIM SET SHIM SET 1 1 1 1 N (C=*1978.06) 121250-01950 121250-01951 SHIM SET SHIM SET (B=*1978.06) 71 72 72-1 4 1 1 1 GASKET 16, ROUND PLUG PT 1/4 GASKET GASKET (A=E/#84249) 59 1 124790-01600 59-1 1 124790-01601 1 1 1 (D) 1 1 SUMP ASSY, LUB OIL SUMP ASSY, LUB OIL PLUG 16 PLUG 16 WASHER 8 SPRING WASHER 8 STUD EYE NUT M12 FLANGE, MOUNTING FLANGE, MOUNTING 57 58 58-1 (C) (D=*1976.12) 22113-080000 189040-01860 124770-07210 26620-120002 124772-01600 124790-01601 1 1 1 (B) GASKET, CYL. HEAD GASKET, CYL. HEAD 1 (A=EXXX) (C=EXXX) 1 121250-01750 GASKET, OIL SUMP 121250-01751 GASKET, OIL SUMP 1 (B=EXXX) 1 26113-080302 BOLT M 8X 30 54 55 56 (A) (C=*1976.12) (B=EXXX) 23414-160000 23873-020000 124465-01750 124465-01751 ------------------ Q'TY ------------------ DESCRIPTION (B=*1976.12) 44 45 (D)=3QM (E)= (F)= 26116-080222 22212-080000 22217-080000 1 1 1 1 N N (D=*1978.06) BOLT M 8X 22 PLATED SPRING WASHER 8 SPRING WASHER 8 (A=EXXX) (B=EXXX) (C=EXXX) 1 121250-01850 COVER 1 124160-01861 GASKET 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 (D=EXXX) ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 1.CYLINDER BLOCK (A)=2QM20 (B)=3QM30 (C)=2QM Fig.1.CYLINDER BLOCK REF. 74-1 74-2 75 76 77 78 78-1 79 79-1 80 81 81-1 PARTS NO. ------------------ Q'TY ------------------ DESCRIPTION 124160-01862 GASKET 1 (A=EXXX) (B=EXXX) (C=EXXX) 1 124160-01863 GASKET (A=EXXX) (B=EXXX) (C=EXXX) 1 26116-060122 BOLT 6X12 1 26116-060162 BOLT 6X16 22137-060000 WASHER 6, POLISHED 1 1 23065-090620 PIPE 9X 620 1 124772-03100 PIPE, BREATHER (A=*1976.12) (B=*1976.12) (C=*1976.12) 1 124250-01650 CLAMP (A=*1976.12) (B=*1976.12) (C=*1976.12) (D=*1976.12) 1 1 1 85 85-1 1 1 (A=EXXX) 86 87 88 1 1 1 89 90 91 1 1 2 92 93 94 2 2 1 124770-08110 124770-08120 26116-120302 22212-120000 22217-120000 (B=EXXX) 124790-08120 121390-08120 124223-92800 124770-08340 121370-08340 124770-08910 22217-120000 22137-120000 23883-180000 BRACKET BRACKET SHIM SET ASSY, FOOT ABSORBER MOUNTING, FEXIBLE NUT M12 SPRING WASHER WASHER 12,POLISHED PLUG M18 (A=E/#85658) (B=E/#81661) 1 23414-180023 GASKET 18 (A=E/#85658) (B=E/#81661) (C) (D) 1 1 1 1 N 1 1 1 1 N 4 2 4 2 4 2 4 2 4 1 1 4 1 1 4 1 1 4 1 1 N 1 1 1 1 1 1 1 1 N 1 1 1 1 Z 1 1 1 1 1 1 1 1 N 1 1 8 1 1 8 1 1 8 1 1 8 8 8 8 8 8 8 8 8 R (F) (D=*1976.12) (D=E/#81809) BRACKET (B), ENGINE BRACKET (B), ENGINE BOLT M12X 30 PLATED SPRING WASHER 12 SPRING WASHER (C=EXXX) (B) (D=EXXX) (D=*1976.12) 124770-07230 LIFTER, ENGINE 1 1 124070-07230 LIFTER, ENGINE (A=E/#85335) (B=E/#81577) (C=E/#81899) (E) I (A) (D=EXXX) (A=*1976.12) (B=*1976.12) (C=*1976.12) 1 124223-49750 BAND 1 124766-59050 CLAMP 12 82 83 84 95 Remarks (1)CYL.BLOCK ASSY FOR 2QM OR 2QM20 CONTAINS THE ABOVE-MENTIONED PART FROM REF.NO.33 UP TO REF.NO.38 AS EXTRAS IN ORDER TO MAKE THE ASSY INTERCHGEABLE WITH CYL.BLOCK ASSY OF TORACTOR. THUS,PAY MUCH ATTEN -TION TO THIS REGARD AT THE TIME OF REPAIRRING OR REASSEMBLY. PLEASE BE SURE TO REMOVE. (2)REFER TO FIG.6 FOR ILLUSTRATED. (3)OPTIONAL(SELECTION USE PARATS) LEV. (D)=3QM (E)= (F)= N (D=EXXX) 2 1 2 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 4 4 1 4 4 4 4 1 1 3 3 W W (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 2.GEAR HOUSING (A)=2QM20 (B)=3QM30 (C)=2QM Fig.2.GEAR HOUSING REF. 1 3 4 1 2 2 5 6 6-1 2 1 1 7 8 8-1 9 13 14 15 1 1 1 16 17 17-1 1 1 1 22 23 24 24-1 25 26 27 27-1 28 29 30 30-1 30-2 724772-01500 26216-080182 26716-080002 124450-01800 124450-01511 124450-01512 124772-01850 124770-01861 26116-080202 23414-080000 124772-07300 124790-07300 26557-060102 124770-52100 124772-52100 (A=E/#82067) 1 124770-52110 1 24101-062044 1 1 1 22242-000200 124770-52120 124772-52120 ------------------ Q'TY ------------------ DESCRIPTION HOUSING ASSY, GEARS STUD M 8X 18 PLATED NUT M 8 OIL SEAL HTC588012 GASKET, GEAR HOUSING GASKET, GEAR HOUSING 22217-080000 SPRING WASHER 8 1 (A=EXXX) (B=EXXX) (C=EXXX) 1 22137-080000 WASHER 8, POLISHED 1 1 1 20 21 21-1 PARTS NO. (A=EXXX) (B=EXXX) (C=EXXX) 1 26116-081052 BOLT M 8X105 PLATED 1 22212-080000 SPRING WASHER 8 10 11 12 18 19 1 (A=EXXX) (B=EXXX) 1 124790-01870 26557-060082 1 1 724770-09550 1 724772-09550 (C) (D) 1 3 3 1 3 3 1 3 3 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 1 1 4 1 1 4 1 1 4 1 1 4 3 1 3 1 3 3 1 1 2 1 1 2 2 2 1 1 1 SHAFT BALL BEARING #6204 CIRCLIP 20 CLUTCH, ROLLER CLUTCH, ROLLER 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 4 4 1 4 4 1 4 4 4 4 4 4 1 1 2 2 1 1 (A=E/#82067) 1 724772-09550 TACHOMETER UNIT (A=E/#85657) (B=E/#81660) 1 1 1 1 1 TACHOMETER UNIT TACHOMETER UNIT 1 1 1 31-2 724772-09500 TACHOMETER UNIT 2 (A=E/#85657) (B=E/#81660) 3 124770-09010 TACHOMETER UNIT 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 122410-61670 124770-09250 23871-020000 SEAL, OIL CONNECTOR PLUG PT1/4,SCREW N N S N N N (D=EXXX) 724770-09500 2 2 724772-09500 (A=E/#82067) 33 34 35 R (D=*1976.12) SEAL, OIL BOLT M 8X 25 PLATED SPRING WASHER 8 SPRING WASHER 8 COVER SCREW M 6X 8 TACHOMETER UNIT TACHOMETER UNIT I (F) (D=EXXX) 9 (C=EXXX) (E) (D=EXXX) 124240-01881 GASKET, HYD.OIL PUMP 1 1 124240-01882 GASKET, HYD.OIL PUMP (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 124770-52180 26116-080252 22212-080000 22217-080000 (B) COVER GASKET BOLT M 8X 20 PLATED GASKET 8, ROUND POINTER POINTER SCREW 6X10 GEAR, PUMP DRIVING GEAR, PUMP DRIVING (A=*1976.12) (B=*1976.12) (C=*1976.12) 1 22252-000470 CIRCLIP 47 1 124770-52150 COVER, GEAR SHAFT 1 1 1 (A) 31 31-1 32 Remarks (1)OPTIONAL (2)REFER TO FIG.20 FOR ILLUSTRATED. LEV. (D)=3QM (E)= (F)= 1 1 S 1 1 Z 1 S Z ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 2.GEAR HOUSING (A)=2QM20 (B)=3QM30 (C)=2QM Fig.2.GEAR HOUSING REF. 35-1 36 37 37-1 38 LEV. 3 3 3 3 3 2 42 43 44 2 2 2 45 46 47 47-1 Remarks (1)OPTIONAL (2)REFER TO FIG.20 FOR ILLUSTRATED. (A) (B) (C) (D) (E) I 1 1 1 1 1 1 1 1 1 N 1 1 1 1 S SHAFT, OUTPUT GEAR SPRING PIN 3X20 STUD M 8X 65 PLATED STUD M 8X 50 PLATED NUT M 8 SPRING WASHER 8 SPRING WASHER 8 1 1 1 1 124770-09140 22351-030020 26226-080652 26226-080502 26716-080002 22212-080000 22217-080000 1 2 2 1 2 2 1 2 2 1 2 2 2 4 4 2 4 4 2 4 4 2 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 1 1 (B=EXXX) (C=EXXX) N (D=EXXX) WASHER 8, POLISHED TACHOMETER, ELECTRIC SENDER UNIT SENDER UNIT (C=EXXX) R (F) PLUG PT1/4,SCREW SHAFT GEAR ASSY GEAR ASSY 2 (A=EXXX) (B=EXXX) 2 22137-080000 124770-91100 2 2 124770-91160 2 124770-91161 (A=EXXX) ------------------ Q'TY ------------------ DESCRIPTION 23872-020000 124770-09100 124770-09150 124772-09150 3 (A=E/#82067) 3 124770-09200 39 40 41 44-1 PARTS NO. (D)=3QM (E)= (F)= N 2 2 2 (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 3.CYLINDER HEAD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.3.CYLINDER HEAD REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 1 2 6 7 8 2 2 2 9 10 11 2 2 2 12 12-1 2 2 (A=*1978.11) 13 13-1 2 2 2 17 17A 18 2 2 2 19 20 21 2 2 2 22 23 24 2 2 1 25 26 27 1 1 1 28 29 30 1 1 1 31 32 33 1 1 1 34 35 36 1 1 1 37 38 38-1 1 1 1 41 42 43 44 45 46 47 48 49 (B=*1978.11) HEAD ASSY, CYLINDER HEAD ASSY, CYLINDER VALVE, SUCTION VALVE, EXHAUST PLUG STUD SPRING, VALVE RETAINER, SPRING COTTER 8 GUIDE, SUC.VALVE GUIDE, SUC.VALVE (C=*1978.11) 124450-11170 GUIDE, EXH.VALVE 2 2 124450-11171 GUIDE, EXH.VALVE (A=*1978.11) (B=*1978.11) (C=*1978.11) 14 15 16 39 40 Remarks (1)INC.55 & 56. (2)OPTIONAL (3)2QM & 3QM:OPTIONAL 2QM20 & 3QM30:STANDARD EQUIPPED 724772-11700 721370-11700 104600-11100 104600-11110 124250-11880 104700-11350 124772-11120 103338-11180 103338-11190 124450-11160 124450-11161 1 2 5 124770-11340 124460-11270 22351-060014 26216-080602 26216-080502 26716-080002 26213-081002 26713-080002 121370-11080 124060-11510 121250-11520 104511-11370 121370-11750 134790-49600 173400-11900 27210-200300 123210-09310 124220-09320 23414-250000 124770-11650 124450-44410 26116-080222 26116-080142 26116-080402 26116-080252 22212-080000 22217-080000 1 2 721250-11650 721250-11680 721250-11660 (D) (E) I R (F) 1 1 3 2 1 2 3 4 4 4 2 1 3 3 3 2 1 2 6 6 6 4 4 4 6 6 6 2 2 3 3 2 2 3 3 N 2 2 3 3 2 2 3 3 N 4 2 2 6 3 3 4 2 2 6 3 3 3 (D=*1978.11) SEAL, VALVE STEM NUT M12 SPRING PIN 6X14 STUD M 8X 60 PLATED STUD M 8X 50 PLATED NUT M 8 STUD M 8X100 NUT, 8 SEAT, SUCTION VALVE PLUG PT1/2 PLUG PT1/4 CAP, VALVE JOINT JOINT FLANGE ZINC, ANTI-CORROSIVE PACKING PLUG GASKET 25,ROUND COVER GASKET BOLT M 8X 22 PLATED BOLT 8X14 BOLT M 8X 40 PLATED BOLT M 8X 25 PLATED SPRING WASHER 8 SPRING WASHER 8 ARM ASSY, ROCKER ARM ASSY, ROCKER ARM ASSY, ROCKER (C) (D=*1978.11) (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 1 124770-11420 CHAMBER, FRONT 1 104900-11410 CHAMBER, REAR 104900-11450 GASKET, CHAMBER 1 1 103854-11490 INSULATOR 1 124772-11250 SUPPORT, ROCKER ARM 124450-11290 RETAINER 1 1 724450-11650 ARM ASSY, ROCKER 1 724450-11660 ARM ASSY, ROCKER 1 1 1 (B) 4 4 4 6 6 4 6 6 6 6 2 6 6 3 6 6 2 6 6 2 2 1 2 3 1 2 2 3 1 1 2 3 1 2 1 3 2 2 1 2 2 1 1 1 1 1 1 1 4 4 4 4 2 2 2 8 8 2 8 8 4 4 4 4 2 2 3 3 2 2 3 3 4 2 2 6 3 3 4 2 2 6 3 3 2 2 2 3 2 2 2 3 2 1 2 N 1 1 2 1 2 1 1 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 3.CYLINDER HEAD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.3.CYLINDER HEAD REF. LEV. PARTS NO. 721250-11670 101158-11230 26756-080002 724772-11520 724772-11521 50 51 52 1 2 2 53 53-1 1 1 (A=E/#84766) 54 54-1 1 1 57-2 58 58-1 59 ARM ASSY, ROCKER SCREW, VALVE LOCK NUT M 8 PLATED BONNET ASSY, HEAD BONNET ASSY, HEAD 721370-11520 721370-11521 2 2 2 66 67 68 2 2 2 69 69-1 2 2 (A=EXXX) 70 71 71-1 72 73 2 2 2 2 2 2 77 78 78-1 2 2 2 (C=E/#81551) 124770-03600 104200-03641 124770-03610 124770-03680 121370-03680 124770-03690 26757-060002 22360-080000 22137-080000 22212-060000 22217-060000 2 2 (B=EXXX) 22137-060000 124250-03630 120220-03660 (C=EXXX) 2 124250-03640 124770-03710 26113-050128 124770-11770 121370-11320 124460-03650 Remarks (1)INC.55 & 56. (2)OPTIONAL (3)2QM & 3QM:OPTIONAL 2QM20 & 3QM30:STANDARD EQUIPPED 2 2 2 1 1 1 6 6 1 1 R 1 N 121370-11331 124460-03662 124460-03663 26116-060142 22212-060000 22217-060000 124450-11310 121370-11310 1 1 N 2 2 1 1 2 2 1 1 S 2 1 2 1 N 2 1 2 1 2 1 2 1 S (D=E/#81621) 1 2 2 2 1 3 3 3 1 2 2 2 3 3 3 1 1 1 2 1 1 2 4 1 1 6 2 2 4 1 1 6 2 2 2 2 2 2 N (D=EXXX) 3 2 2 3 3 3 3 2 2 3 3 3 3 2 4 3 3 2 4 3 2 1 1 3 1 1 2 1 1 3 1 1 1 N 1 2 2 2 2 S 2 2 2 2 S 2 2 N 4 4 4 4 4 4 N (D=E/#81621) GASKET GASKET (D=E/#81621) GASKET (D=EXXX) BOLT M 6X 14 SPRING WASHER 6 SPRING WASHER 6 (B=EXXX) 82 83 4 4 I (F) (D=EXXX) SCREW, STOP FITTINGS BOLT M 5X 12 JOINT PT1/8 COVER COVER (B=EXXX) 80 81 81-1 1 6 6 (E) (D=E/#81621) WASHER 6, POLISHED SCREW, DECOMP SCREW (B=E/#81446) 79-2 4 4 1 1 SHAFT, DECOMPRESSION SPRING,DECOMPRESSION LEVER, DECOMPRESSION CONNECTOR CONNECTOR PIN NUT 6 SNAP PIN 8 WASHER 8, POLISHED SPRING WASHER 6 SPRING WASHER 6 (B=E/#81446) 79 79-1 (D) 1 1 (A=E/#84915) (B=E/#81384) (C=E/#81653) (D=E/#81520) 2 26756-050002 LOCK NUT M 5 PLATED 2 24311-000070 O-RING 1A P-7.0 74 75 76 (C) (D=E/#81621) 24321-000350 O-RING 1A G-35.0 2 (A=E/#84766) (B=E/#81446) (C=E/#81551) 2 124450-11320 PLUG U7/8 63 64 65 (B) BONNET ASSY, HEAD BONNET ASSY, HEAD 124160-01751 COVER,FILLER 2 (A=EXXX) (B=EXXX) (C=EXXX) 2 101104-01760 GASKET, CAP 2 2 2 (A) (C=E/#81551) 101104-01750 CAP 2 2 124160-01750 CAP (A=E/#84766) (B=E/#81446) 60 61 62 ------------------ Q'TY ------------------ DESCRIPTION (B=E/#81446) 57 57-1 (D)=3QM (E)= (F)= (D=EXXX) GASKET, BONNET GASKET, BONNET 1 1 1 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 3.CYLINDER HEAD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.3.CYLINDER HEAD REF. Remarks (1)INC.55 & 56. (2)OPTIONAL (3)2QM & 3QM:OPTIONAL 2QM20 & 3QM30:STANDARD EQUIPPED LEV. 84 85 86 1 1 1 87 88 89 1 1 1 90 1 PARTS NO. 124460-11360 24311-000140 104214-03700 124770-03720 124770-11670 124450-11671 124450-11681 DESCRIPTION CAP O-RING 1A P-14.0 CABLE,REMO-CON. BRACKET COVER COVER, SIDE GASKET (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(E) I R (A) (B) (C) (D) (F) 2 2 1 3 3 1 2 2 1 3 3 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 4.SILENCER & EXHAUST MANIFOLD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.4.SILENCER & EXHAUST MANIFOLD REF. LEV. 1 2 3 1 1 1 4 5 5-1 1 1 1 6 8 124770-12500 124770-12540 124770-12530 26117-060149 22212-060000 22217-060000 1 1 1 12 13 14 1 1 1 15 16 17 1 1 1 20 20-1 2 2 (A=EXXX) 21 22 23 2 2 2 24 25 25-1 2 2 2 121250-12710 121250-11550 26716-080002 22137-080000 124450-11320 120220-13510 120220-13010 724772-13500 721370-13500 43600-001200 43600-500290 SILENCER, AIR INTAKE ELEMENT, CLEANER PLATE BOLT M 6X 14 PLATED SPRING WASHER 6 SPRING WASHER 6 2 2 2 31 32 33 2 2 1 34 35 36 1 1 1 37 38 39 1 1 1 40 41 42 1 1 1 43 44 44-1 1 1 1 (A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 (E) I R (F) N (D=EXXX) GASKET, INT.MANIFOLD BOLT, INT.MANIFOLD NUT M 8 WASHER 8, POLISHED PLUG U7/8 SILENCER, EXHAUST PIPE, EXHAUST MANIFOLD ASSY, EXH. MANIFOLD ASSY, EXH. SEE 43600-500290 COCK 1/4 1 1 1 1 1 2 2 1 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 N (C=EXXX) 124772-13410 104200-11920 23061-070500 23061-100500 124450-44560 124460-77680 (A=*1976.12) 2 124223-49750 2 124772-13160 28 29 30 ------------------ Q'TY ------------------ DESCRIPTION (A=EXXX) (B=EXXX) (C=EXXX) 1 121370-12730 MANIFOLD, AIR INTAKE 2 124770-11770 JOINT PT1/8 9 10 11 26 27 PARTS NO. (D)=3QM (E)= (F)= 121370-13160 124770-13180 124770-13170 26113-080222 124223-49300 124770-13150 124223-13070 124770-13170 26113-080282 26113-080222 124790-49250 104211-49160 26116-060182 121390-13250 121370-49160 26116-060252 22212-060000 22217-060000 JOINT COCK PIPE 7X 500 PIPE 10X 500 CLAMP RETAINER 1 1 1 1 1 1 1 1 1 1 1 1 N (C=*1976.12) 1 BAND COVER COVER GASKET GASKET BOLT M 8X 22 JOINT, PIPE CONNECTOR, EXHAUST ELBOW, EXHAUST GASKET BOLT M 8X 28 BOLT M 8X 22 FLANGE PACKING BOLT M 6X 18 COVER PACKING BOLT 6X25 SPRING WASHER 6 SPRING WASHER 6 1 1 1 1 1 1 1 1 4 1 1 4 1 4 1 4 1 4 1 4 1 1 1 1 4 1 1 4 1 2 1 1 4 4 4 N (D=EXXX) Remarks (1)NOT ILLUSTRATED. 45 46 1 1 47 48 49 1 1 1 124790-49290 124770-13690 123325-49220 23093-191000 23000-035000 ELBOW (PT1/2) JOINT 1/2, PIPE JOINT, PIPE PIPE 19X1000 CLAMP 35 1 1 1 2 1 1 2 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 4.SILENCER & EXHAUST MANIFOLD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.4.SILENCER & EXHAUST MANIFOLD REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) Remarks (1)NOT ILLUSTRATED. 50 51 52 1 1 1 53 54 55 1 1 1 57 58 59 2 2 2 60 61 62 2 2 2 63 64 65 2 1 1 66 67 68 1 1 1 69 70 71 1 1 1 72 73 74 1 1 2 75 76 77 3 3 2 78 79 80 2 2 2 124450-11900 124770-13130 121250-13520 724770-13200 721370-13200 721390-13200 124770-13690 123325-49220 124770-49040 121370-49040 121390-49040 23000-025000 23000-035000 124770-13150 26113-080282 124790-49260 26116-060352 124223-49300 123325-49220 23072-204000 23000-070000 724770-13300 721370-13300 124770-13550 124770-49100 124770-49110 23112-140000 23000-025000 124770-49050 121370-49050 GASKET GASKET GASKET, EXH.MANIFOLD MIXINGELBOW ASSY MIXINGELBOW ASSY MIXINGELBOW ASSY JOINT 1/2, PIPE JOINT, PIPE PIPE, COOLING WATER PIPE, COOLING WATER PIPE, COOLING WATER CLAMP 25 CLAMP 35 CONNECTOR, EXHAUST BOLT M 8X 28 FLANGE BOLT M 6X 35 PLATED JOINT, PIPE JOINT, PIPE HOSE (51/62X4000) CLAMP 70 ELBOW ASSY (U-TYPE) ELBOW ASSY (U-TYPE) ELBOW, MIXING JOINT, PIPE CONNECTOR STREET ELBOW PT1+1/2 CLAMP 25 PIPE, COOLING WATER PIPE, COOLING WATER (B) 1 1 (C) (D) (E) I R (F) 1 1 3 1 3 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 4 2 1 4 1 2 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 5.CAMSHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.5.CAMSHAFT REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) 1 1-1 2 2-1 124465-14010 1 1 724465-14580 (A=FROM 1ST) CAMSHAFT CAMSHAFT ASSY 121250-14010 721250-14580 CAMSHAFT CAMSHAFT ASSY 1 1 2 2 1 5-1 6 7 1 1 1 8 9 10 1 1 1 124450-14120 22512-070180 124450-14100 121250-14100 103338-14200 124450-14400 24101-062064 26587-080122 121250-02450 1 1 (C) (D) 1 1 (E) I R (F) N (C=FROM 1ST) (B=FROM 1ST) 3 4 5 (B) 1 1 1 1 N (D=FROM 1ST) NUT KEY 7X 18 GEAR, CAMSHAFT GEAR, CAMSHAFT TAPPET ROD, PUSH BALL BEARING SCREW M 8X 12 RETAINER 1 1 1 1 1 1 1 1 1 1 4 4 1 6 6 1 4 4 1 6 6 1 1 1 1 1 1 1 1 1 1 1 1 S (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 6.MAIN METAL & CRANKSHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.6.MAIN METAL & CRANKSHAFT REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 1-1 724550-21701 1 1 724450-21702 (A=E/#84365) 2 5 6 1 2 2 7 8 8-1 2 1 1 9 10 10-1 11 12 12-1 721250-21700 22512-070240 22512-070280 22512-100360 124450-21200 121250-21200 (A=E/#82067) 1 124160-21670 1 124772-21650 124772-21651 1 (A=EXXX) 1 121370-21651 1 1 124790-21650 124790-21651 CRANKSHAFT ASSY CRANKSHAFT ASSY (B) 1 1 (C) (D) 1 1 (E) I R (F) N (C=E/#81201) CRANKSHAFT ASSY KEY 7X 24 KEY 7X 28 KEY 10X 36 GEAR, CRANKSHAFT GEAR, CRANKSHAFT 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 NUT M30 V-PULLEY V-PULLEY 1 1 1 1 S 1 1 N 1 V-PULLEY V-PULLEY V-PULLEY 1 1 N (C=EXXX) 13 14 15 1 1 1 18 19 20 2 2 2 21 22 24 2 1 2 25 26 27 2 2 1 29 30 31 2 2 2 32 33 34 1 1 1 34-1 35 36 37 38 38-1 39 39-1 121390-21650 724465-02500 721250-02500 121250-02100 121250-02110 124450-02220 121250-02220 721250-02610 121250-01220 26116-100501 22312-060140 721250-02620 121250-02130 26116-100501 22312-060140 124460-02150 26116-100252 22217-100000 22217-100000 1 (A=EXXX) (B=EXXX) 1 121250-02300 121250-02100 1 1 124450-02110 1 124770-21590 124770-21591 1 (A=EXXX) 1 124790-21590 1 124790-21591 V-PULLEY HOUSING ASSY,BEARING HOUSING ASSY MAIN METAL MAIN METAL SEAL, OIL SEAL, OIL HOUSING ASSY, METAL MAIN METAL BOLT M10X 50 PLATED PARALLEL PIN 6X14 HOUSING ASSY, METAL MAIN METAL BOLT M10X 50 PLATED PARALLEL PIN 6X14 GASKET BOLT M10X 25 PLATED SPRING WASHER 10 SPRING WASHER 10 (C=EXXX) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 1 2 2 1 2 2 1 5 5 1 5 5 1 5 5 1 5 5 5 5 5 5 N (D=EXXX) BOLT MAIN METAL BEARING THRUST FLYWHEEL W/RING GEAR FLYWHEEL W/RING GEAR 2 1 2 1 1 2 1 2 1 1 N 1 FLYWHEEL W/RING GEAR FLYWHEEL W/RING GEAR 1 N (C=EXXX) 40 1 41 42 43 1 1 1 44 45 46 1 1 1 121370-21591 124550-21600 124450-21530 124160-21700 124227-21920 124250-21501 121370-21680 FLYWHEEL W/RING GEAR RING GEAR END NUT DISC, OIL SHIELD PARALLEL PIN BOLT, REAMER BOLT 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1 1 6 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 6.MAIN METAL & CRANKSHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.6.MAIN METAL & CRANKSHAFT REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 47 47-1 1 1 22212-120000 22217-120000 SPRING WASHER 12 SPRING WASHER (B=EXXX) 48 1 124060-21660 (B) (C) (D) 1 1 1 1 1 1 (E) I R (F) N (D=EXXX) WASHER (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 7.PISTON & CONNECTING ROD (A)=2QM20 (B)=3QM30 (C)=2QM Fig.7.PISTON & CONNECTING ROD REF. 1 1-1 3 3-1 LEV. PARTS NO. 724750-22500 RING SET 2 2 724790-22500 RING SET (A=*1978.03) (B=*1978.03) (C=*1978.03) 7 8 9 1 1 1 11 12 13 2 2 2 104600-22300 104600-22400 724450-23100 124450-23200 124450-23100 124450-23300 ------------------ Q'TY ------------------ DESCRIPTION 124750-22090 PISTON W/RINGS 1 1 724790-22720 PISTON W/RINGS (A=*1978.03) (B=*1978.03) (C=*1978.03) (D)=3QM (E)= (F)= (E) I (A) (B) (C) (D) 2 2 3 3 2 2 3 3 N 2 2 3 3 2 2 3 3 N 2 4 2 3 6 3 2 4 2 3 6 3 4 2 2 6 3 3 4 2 2 6 3 3 R (F) (D=*1978.03) (D=*1978.03) PIN, PISTON CIRCLIP ROD ASSY, CONNECTING BOLT, ROD BUSH, PISTON PIN METAL, CRANK PIN (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 8.LUB.OIL SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.8.LUB.OIL SYSTEM REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) (C) (D) (E) I 724450-32700 1 1 724772-32700 (A=E/#82066) PUMP ASSY, LUB. OIL PUMP ASSY, LUB. OIL 1 1 1 S 1-2 724790-32101 1 (A=E/#87435) 1 721250-32700 PUMP ASSY, LUB. OIL 1 1 N 2 1 121390-32001 (B=EXXX) 3 3-1 3-2 4 5 6 7 8 9 2 124450-32200 121250-32201 2 (A=E/#82067) 2 121390-32200 (C=E/#82677) PUMP ASSY, LUB. OIL PUMP ASSY, LUB. OIL 13 14 15 2 1 1 16 19 20 1 2 2 21 22 23 2 2 2 24 25 26 2 2 1 27 28 28-1 1 1 1 124450-32020 124772-35060 121370-35061 124450-35070 124550-35110 124450-35301 121250-35300 24190-100001 124450-35320 121250-35320 124450-35330 121250-35330 22252-000100 121250-35340 124450-35350 124465-39200 121250-39200 121252-39200 GEAR, LUB. OIL PUMP 1 1 31 32 33 1 1 1 34 35 36 1 1 1 37 38 39 1 1 1 40 41 42 1 1 1 124160-39140 23414-100000 23414-080000 124550-59820 101147-59810 124450-39240 26557-080102 22137-080000 124770-34800 24311-000090 124770-34710 124770-34720 124770-34730 124770-34750 1 N 1 1 1 1 S 1 1 1 1 S 1 1 1 1 Z 1 1 1 1 Z 1 1 1 1 1 1 3 1 1 3 1 1 3 1 1 3 1 1 1 1 1 1 (D=E/#81193) (D=*1979.07) (D=*1979.07) GASKET PIPE, OIL INLET PIPE, OIL INLET NUT PF1/4 ELEMENT, LUB. OIL VALVE ASSY, CONTROL VALVE ASSY, CONTROL BALL 5/16, STEEL SPRING SPRING RETAINER RETAINER CIRCLIP 10 SHIM NUT PIPE, LUB OIL PIPE, LUB OIL PIPE ASSY, LUB. OIL (B=*1979.03) 29 30 1 1 1 GEAR, LUB OIL PUMP GEAR 22351-040012 SPRING PIN 4X12 2 (A=*1979.07) (B=*1979.07) (C=*1979.07) 2 22212-080000 SPRING WASHER 8 22522-030100 WOODRUFF KEY 3X10 2 2 26716-080002 NUT M 8 2 26117-060229 BOLT M 6X 22 2 2 2 1 (C=EXXX) (A=E/#84439) (B=E/#81149) (C=E/#81289) 2 22322-030220 TAPER PIN 3X22 (A=*1979.07) (B=*1979.07) (C=*1979.07) 10 11 12 R (F) 1 1-1 2-1 Remarks (1)OPTIONAL (B) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 R (D=*1979.03) BOLT 10, PIPE JOINT GASKET 10, ROUND GASKET 8, ROUND BOLT 8, PIPE JOINT BOLT 8, PIPE JOINT RETAINER, PIPE SCREW M 8X 10 WASHER 8, POLISHED DIPSTICK, LUB. OIL O-RING 1A P-9.0 PIPE, DIPSTICK BOLT, PIPE JOINT GASKET RETAINER, PIPE 1 2 1 2 1 2 1 2 4 2 6 4 2 6 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 2 1 1 2 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 8.LUB.OIL SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.8.LUB.OIL SYSTEM REF. 43 44 44-1 45 46 47 47-1 LEV. 1 1 1 PARTS NO. 26117-080149 22212-080000 22217-080000 1 1 22212-060000 22217-060000 BOLT M 8X 14 PLATED SPRING WASHER 8 SPRING WASHER 8 Remarks (1)OPTIONAL 1 2 2 52 53 54 2 2 1 724772-39500 104214-39650 124772-39950 23010-012000 23414-140000 124450-35110 (A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 (E) I R (F) N (D=EXXX) SPRING WASHER 6 SPRING WASHER 6 (B=EXXX) 48 50 51 ------------------ Q'TY ------------------ DESCRIPTION (A=EXXX) (B=EXXX) (C=EXXX) 1 121370-35080 RETAINER, PIPE 1 26116-060142 BOLT M 6X 14 (D)=3QM (E)= (F)= 1 1 1 1 1 1 1 1 N (D=EXXX) PUMP ASSY, WASTE JOINT, PIPE PIPE CLAMP 12 GASKET 14, ROUND O-RING, L.O.STRAINER 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 9.C.S.W.PUMP & BILGE PUMP (A)=2QM20 (B)=3QM30 (C)=2QM Fig.9.C.S.W.PUMP & BILGE PUMP REF. 1 1-1 2 2-1 LEV. PARTS NO. ------------------ Q'TY ------------------ DESCRIPTION 724770-42700 PUMP ASSY, C. WATER 1 1 724770-42701 PUMP ASSY, C. WATER (A=E/#86258) (B=E/#82252) (C=E/#82245) 1 1 721390-42700 721390-42701 (D)=3QM (E)= (F)= (A) (B) (C) 1 1 1 1 1 1 PUMP ASSY, C. WATER PUMP ASSY, C. WATER (D) (E) I R (F) N 1 1 N (D=E/#82220) 5 5-1 6 6-1 124770-42030 SHAFT, IMPELLER 2 2 124772-42130 SHAFT, IMPELLER (A=E/#86258) (B=E/#82252) (C=E/#82245) 2 2 121390-42030 121390-42130 1 1 1 1 1 1 SHAFT, IMPELLER SHAFT, IMPELLER S 1 1 S (D=E/#82220) 7 8 9 2 2 2 10 11 12 2 2 2 13 14 15 2 2 2 16 17 18 2 2 2 19 20 21 2 2 2 21-1 21A 22 23 24 25 26 27 22242-000150 22242-000170 22252-000350 22252-000400 24101-062024 24101-062034 124223-42070 145410-46070 124223-42160 145410-46080 124223-42080 145410-46080 124223-42091 145410-46090 124223-42100 124323-42100 2 (A=EXXX) (B=EXXX) 2 145410-46100 26554-040102 2 2 26554-050082 2 124223-42040 CIRCLIP 15 CIRCLIP 17 CIRCLIP 35 CIRCLIP 40 BALL BEARING BALL BEARING PIECE RING OIL SEAL TC15307 OIL SEAL TC17328 OIL SEAL TC13287 OIL SEAL TC17328 IMPELLER, C. WATER IMPELLER, C. WATER CAM, IMPELLER CAM, IMPELLER 121390-46130 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 N (C=EXXX) 1 CAM, IMPELLER SCREW M 4X 10 SCREW M 5X 8 KEY KEY PLATE, WEAR 145410-46040 2 2 124223-42120 (A=E/#86258) (B=E/#82252) 2 1 1 1 Z (C=E/#82245) PLATE 1 Z (D=E/#82220) 28 29 30 2 145410-46120 1 PLATE (A) 124223-42140 GASKET 2 (A=E/#86258) (B=E/#82252) (C=E/#82245) 2 121390-42140 GASKET 1 1 1 Z 1 Z (D=E/#82220) 31 32 2 2 33 33-1 2 2 (A=E/#86258) 34 34-1 2 2 124223-42110 145410-46110 124223-42150 121575-42150 GASKET PACKING COVER COVER (B=E/#82252) 121390-42150 145410-46130 1 1 1 1 1 1 1 1 1 1 S (C=E/#82245) COVER PLATE (B) 1 1 S (D=E/#82220) 35 35-1 26554-040122 SCREW M 4X 12 2 2 26554-040082 SCREW M 4X 8 (A=E/#86258) (B=E/#82252) (C=E/#82245) 6 6 6 6 6 6 S ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 9.C.S.W.PUMP & BILGE PUMP (A)=2QM20 (B)=3QM30 (C)=2QM Fig.9.C.S.W.PUMP & BILGE PUMP REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 36 36-1 2 2 26113-060169 26113-060102 (B) (C) BOLT M 6X 16 BOLT M 6X 10 (D) 6 6 (E) I R (F) S (D=E/#82220) 37 38 22312-030080 PARALLEL PIN 3X 8 2 (A=E/#86258) (B=E/#82252) (C=E/#82245) 2 22312-040100 PARALLEL PIN 4X10 2 2 2 Z 2 Z (D=E/#82220) 39 1 124223-42020 GASKET 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 10.C.S.W.PUMP & BILGE PUMP (A)=2QM20 (B)=3QM30 (C)=2QM Fig.10.C.S.W.PUMP & BILGE PUMP REF. Remarks (1)OPTIONAL LEV. 1 2 5 1 1 2 6 7 8 2 2 2 9 10 11 2 2 2 12 13 14 2 2 2 15 16 17 2 2 2 18 19 20 2 2 2 21 22 23 2 2 2 24 25 26 2 2 2 27 28 29 2 2 2 30 31 32 2 2 2 33 34 35 2 2 2 36 37 38 2 2 2 39 40 41 2 2 2 42 43 44 2 2 2 45 46 47 1 1 1 PARTS NO. 724770-42500 721390-42500 124770-42030 121390-42030 22242-000150 22242-000170 22252-000350 22252-000400 24101-062024 24101-062034 124223-42070 145410-46070 124223-42160 145410-46080 124223-42080 145410-46080 124223-42091 145410-46090 124323-42100 145410-46100 26554-040102 26554-050082 124223-42040 145410-46040 124223-42120 121390-46130 145410-46120 124223-42140 121390-42140 124223-42110 145410-46110 22312-030080 22312-040100 124223-46011 121390-46010 104211-42050 26554-040122 26113-060169 26554-040222 26113-060259 104211-42070 26554-040062 124223-46150 124223-42020 977783-00121 DESCRIPTION PUMP W/BILGE, C.W. PUMP W/BILGE, C.W. SHAFT, IMPELLER SHAFT, IMPELLER CIRCLIP 15 CIRCLIP 17 CIRCLIP 35 CIRCLIP 40 BALL BEARING BALL BEARING PIECE RING OIL SEAL TC15307 OIL SEAL TC17328 OIL SEAL TC13287 OIL SEAL TC17328 IMPELLER, C. WATER IMPELLER, C. WATER CAM, IMPELLER CAM, IMPELLER SCREW M 4X 10 SCREW M 5X 8 KEY KEY PLATE, WEAR PLATE PLATE (A) GASKET GASKET GASKET PACKING PARALLEL PIN 3X 8 PARALLEL PIN 4X10 BODY, BILGE PUMP BODY, BILGE PUMP CAM SCREW M 4X 12 BOLT M 6X 16 SCREW M 4X 22 BOLT M 6X 25 IMPELLER, C. WATER SCREW M 4X 6 JOINT, PIPE GASKET PUMP 12V, BILGE (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (D) (E) I R (F) 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 4 4 4 2 2 2 1 1 1 1 1 1 2 1 1 2 1 2 1 2 1 1 2 1 1 1 1 2 1 4 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 11.C.F.W.PUMP & C.F.W.COOLER (A)=2QM20 (B)=3QM30 (C)=2QM Fig.11.C.F.W.PUMP & C.F.W.COOLER REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 5 1 1 2 6 7 8 2 2 2 9 10 11 2 1 1 12 12-1 1 1 (A=EXXX) 13 14 15 1 1 1 16 17 18 1 1 1 18-1 19 20 21 22 724790-43700 721390-43700 124250-42200 124250-42240 124250-42350 124250-42170 124250-42260 124750-42350 26116-060122 22212-060000 22217-060000 (B=EXXX) 124790-42050 124790-42120 121390-42120 26116-060352 22137-060000 22212-060000 22217-060000 1 (A=EXXX) (B=EXXX) 1 124450-44410 26116-080402 1 1 26116-080452 1 26116-080652 23 24 25 1 1 1 25-1 1 PUMP ASSY, C. WATER PUMP ASSY, C. WATER IMPELLER SHAFT, IMPELLER SEAL, MECHANICAL CIRCLIP FLANGE, V-PULLEY V-PULLEY, C.W. PUMP BOLT 6X12 SPRING WASHER 6 SPRING WASHER 6 22137-080000 22157-080000 22212-080000 22217-080000 (C=EXXX) 1 28 29 30 2 2 2 31 32 33 2 2 2 34 34-1 2 2 724790-44500 26226-060182 123672-44190 123672-44200 26117-060169 123672-44210 123682-44220 23061-070700 23061-070650 35 35-1 2 2 124450-44560 124460-77680 36 37 37-1 2 2 2 124790-49600 104200-11920 43600-500310 38 38-1 2 2 23061-100500 23061-120600 39 39-1 2 2 124223-49750 23010-017000 BAND CLAMP 17 (B=E/#81577) Remarks (1)NOT ILLUSTRATED. 40 40-1 2 2 103884-03160 120445-77950 R 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 4 1 1 4 1 1 4 4 4 4 4 1 1 1 N 1 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 2 1 1 2 1 1 2 1 1 2 1 1 1 1 1 1 1 1 4 1 1 4 4 4 4 4 N N (D=EXXX) 1 1 1 1 12 1 1 12 1 1 12 1 1 12 1 1 4 1 1 4 1 1 4 1 1 4 1 1 1 1 1 1 1 1 N 1 1 1 1 1 1 N 1 1 1 1 1 1 1 1 1 1 S 1 1 1 1 1 1 S 1 1 1 1 1 1 S 1 1 1 1 1 1 S (D=*1977.03) (D=*1976.12) (D=E/#81809) PIPE 10X 500 PIPE 12X 600 (C=E/#81899) I (F) (D=EXXX) PIPE JOINT PT3/4 COCK COCK (C=E/#81899) (E) 1 1 CLAMP RETAINER (C=*1976.12) (D) 1 1 1 1 EXCHANGER ASSY, HEAT STUD M 6X 18 PLATED FILLER ASSY PACKING, FILLER BOLT M 6X 16 PLATED CAP CHAIN PIPE 7X 700 PIPE 7X 650 (C=*1977.03) (C) (D=EXXX) GASKET BOLT M 8X 40 PLATED BOLT M 8X 45 PLATED BOLT M 8X 65 PLATED WASHER 8, POLISHED WASHER 8 SPRING WASHER 8 SPRING WASHER 8 (C=EXXX) 26 1 GASKET BRACKET, C.W. PUMP BRACKET, C.W. PUMP BOLT M 6X 35 PLATED WASHER 6, POLISHED SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) (B) (D=E/#81809) (C=E/#81899) RETAINER BRACKET ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 11.C.F.W.PUMP & C.F.W.COOLER (A)=2QM20 (B)=3QM30 (C)=2QM Fig.11.C.F.W.PUMP & C.F.W.COOLER REF. LEV. PARTS NO. 2 2 43 44 45 2 2 2 45-1 2 124790-44400 124790-44470 24311-000950 26716-060002 22212-060000 22217-060000 2 48 49 50 3 3 3 51 52 53 3 3 2 55 56 57 3 2 2 58 59 60 2 2 2 61 62 63 1 1 1 64 64-1 1 1 724790-44550 27210-200300 123210-09310 124220-09320 23414-250000 123325-49220 724790-44560 123325-49220 124790-49750 124790-49760 26116-060602 22137-060000 124790-49800 26116-080202 26116-080252 22137-080000 22212-080000 22217-080000 Remarks (1)NOT ILLUSTRATED. 65 66 67 1 1 1 68 69 1 1 124790-44100 120445-44530 120445-44540 124790-44560 23010-013000 BRACKET, EXCHANGER TANK ASSY, RESERVE BRACKET, SUB-TANK PIPE, C. WATER CLAMP 13 (B) (C) (D) 1 1 1 1 1 1 1 1 2 12 2 12 2 12 20 2 12 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 4 4 1 4 4 1 4 4 1 10 1 4 10 1 4 10 1 4 10 1 4 11 11 11 11 11 11 1 1 1 1 1 1 1 1 1 1 1 1 (E) I R (F) N (D=EXXX) COVER ASSY, (R) ZINC, ANTI-CORROSIVE PACKING PLUG GASKET 25,ROUND JOINT, PIPE COVER ASSY, (L) JOINT, PIPE HOUSING, THERMOSTART PACKING, THERMOSTART BOLT M 6X 60 PLATED WASHER 6, POLISHED THERMOSTAT BOLT M 8X 20 PLATED BOLT M 8X 25 PLATED WASHER 8, POLISHED SPRING WASHER 8 SPRING WASHER 8 (C=EXXX) (A) (D=E/#81809) STACK ASSY PIN O-RING 1A P-95.0 NUT 6 SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) 46 ------------------ Q'TY ------------------ DESCRIPTION (C=E/#81899) 41 42 (D)=3QM (E)= (F)= N (D=EXXX) 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 12.COOLING WATER SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.12.COOLING WATER SYSTEM REF. LEV. 1 2 2A 1 1 1 3 4 5 1 1 1 6 9 10 1 2 1 11 13 14 1 2 2 15 16 17 2 2 2 18 19 20 2 1 1 21 22 23 1 1 1 24 25 26 1 1 1 27 28 29 1 1 1 30 31 34 1 1 2 35 36 37 2 1 1 38 39 40 1 1 1 41 41-1 1 1 PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) PIPE, COOLING WATER PIPE, COOLING WATER PIPE, COOLING WATER CLAMP 22 CLAMP 25 PIPE, COOLING WATER PIPE, COOLING WATER PROTECTOR RETAINER JOINT ASSY, 3-WAY ZINC, ANTI-CORROSIVE PLUG GASKET 25,ROUND PACKING PIPE JOINT PT1/4 PIPE JOINT PT3/8 PIPE JOINT PT3/4 PIPE, COOLING WATER PIPE, COOLING WATER PIPE, COOLING WATER CLAMP 41 PIPE (A), C. WATER PIPE (A), C. WATER PIPE (B), C. WATER PIPE (B), C. WATER CLAMP 25 CLAMP 35 COVER, THERMOSTAT COVER, THERMOSTAT PIPE JOINT PT3/8 PIPE JOINT PT1/4 SUPPORT, THERMOSTAT PACKING PACKING BOLT M 6X 35 PLATED BOLT M 6X 50 PLATED SPRING WASHER 6 SPRING WASHER 6 1 1 1 124770-49200 105582-49200 43600-001200 43600-500290 THERMOSTAT THERMOSTAT SEE 43600-500290 COCK 1/4 1 GASKET 14, ROUND PIPE 7X 300 CLAMP RETAINER 121370-49010 124770-49020 121370-49020 23000-022000 23000-025000 124770-49060 121370-49060 105582-49900 124770-49310 724770-01450 27210-200300 124220-09320 23414-250000 123210-09310 104211-49060 124223-49300 124790-49600 124790-49510 124790-49520 124790-49530 23000-041000 124790-49010 121390-49010 124790-49020 121390-49020 23000-025000 23000-035000 124770-49190 121370-49190 124223-49300 104211-49060 121370-49171 104211-49160 121370-49160 26117-060359 26116-060502 22212-060000 22217-060000 (C) (D) 1 1 1 1 1 1 6 1 1 6 (E) I R (F) 1 2 4 1 2 4 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 1 1 1 1 1 1 1 1 1 2 4 4 4 N (B=EXXX) 42 43 44 44-1 45 46 47 48 48-1 49 50 51 52 1 1 1 1 1 1 1 (A=*1978.12) (B=*1978.12) 1 121370-01850 JOINT 1 1 1 1 1 1 1 1 23414-140000 23061-070300 124450-44560 124460-77680 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A=*1976.12) (B=*1976.12) (C=*1976.12) (D=*1976.12) 1 724770-48100 COCK ASSY, SEA WATER 124223-49050 PIPE, COOLING WATER 2 2 43662-015012 COCK ASSY, SEA WATER 2 124223-48050 JOINT N N ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 12.COOLING WATER SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.12.COOLING WATER SYSTEM REF. LEV. 53 54 55 2 2 2 56 57 58 1 1 1 59 60 61 1 1 1 62 63 64 1 1 1 66 67 68 2 2 1 PARTS NO. 43600-500011 22714-580250 23000-025000 124223-49050 121390-49050 43662-015012 43662-020021 124223-48050 121390-48750 124223-48400 26113-040102 123220-46910 124223-46100 124223-46950 23000-020000 DESCRIPTION COVER, KINGSTON COCK SCREW 5.8X25 CLAMP 25 PIPE, COOLING WATER PIPE, COOLING WATER COCK ASSY, SEA WATER COCK ASSY, SEA WATER JOINT FLANGE HANDLE BOLT M 4X 10 STRAINER, BILGE PIPE, BILGE RETAINER CLAMP 20 (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) 1 5 2 1 5 2 (C) (D) (E) I R (F) 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 2 1 1 1 2 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 13.FUEL INJECTION PUMP (A)=2QM20 (B)=3QM30 (C)=2QM Fig.13.FUEL INJECTION PUMP REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 1 1 1 4 7 8 1 2 2 9 10 11 2 2 2 13 16 17 3 3 2 18 19 20 2 2 2 21 22 23 2 2 2 24 25 26 2 2 2 27 28 29 2 2 2 30 31 32 2 2 2 33 34 35 2 2 2 36 37 38 2 2 2 724770-51700 724790-51700 721370-51700 721390-51700 124770-51100 174307-51170 174307-51180 174307-51190 724550-51520 711100-51540 174100-54120 124550-51301 174307-51320 124550-51320 124550-51340 124550-51341 124550-51350 174307-51380 174307-51370 124240-51390 174307-51250 174307-51270 174307-51450 174307-51460 121150-51460 724240-51530 721150-51530 174307-51510 174307-51550 174307-51560 122117-51560 124550-51370 174307-51700 PUMP ASSY. F.INJECT. PUMP ASSY. F.INJECT. PUMP ASSY. F.INJECT. PUMP ASSY. F.INJECT. PLUNGER W/BARREL RETAINER A RETAINER, LOWER SPRING, PLUNGER GUIDE, PLUNGER ROLLER ASSY PIN, ROLLER VALVE W/SEAT, DELIV. SPRING, DELIV. VALVE SPRING, DELIV. VALVE RETAINER RETAINER GASKET, DELIVERY NIPPLE CAP NUT GASKET PIN GASKET PIECE, GUIDE PIN PIN RACK W/PIN, CONTROL RACK W/PIN, CONTROL PINION RETAINER,PINION PINION SCREW, PINION O-RING, DELIVERY SHIM SET (B) (C) (D) (E) I R (F) 1 1 1 2 2 3 3 2 2 1 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 3 2 3 2 3 2 2 3 3 2 2 3 3 2 4 2 3 6 3 2 3 2 2 1 3 3 2 2 1 3 3 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 2 2 1 2 2 2 3 3 1 2 2 2 3 3 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 14.FUEL INJECTION VALVE (A)=2QM20 (B)=3QM30 (C)=2QM Fig.14.FUEL INJECTION VALVE REF. LEV. 1 2 3 1 2 2 4 5 6 2 2 2 7 8 9 2 2 2 10 2 PARTS NO. 724770-53100 103854-53100 124770-53000 104900-53080 113200-53110 103854-53120 113200-53120 110250-53150 103854-53180 172100-53200 DESCRIPTION VALVE ASSY, F.INJECT BODY, F.I. VALVE NOZZLE ASSY,F.INJECT HOLDER, VALVE W/CASE SPINDLE, INTER SPRING, NOZZLE SHOE, SPRING SHIM SET RETAINER, NOZ.SPRING GASKET (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) (D) 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 2 2 3 3 3 2 3 2 3 (E) I R (F) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 15.FUEL SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.15.FUEL SYSTEM REF. 1 1-1 LEV. 1 2 2 7 8 9 2 2 2 10 10-1 2 2 (A=EXXX) 11 12 12-1 724220-55500 104500-55710 124220-35210 121370-55730 124220-35220 110250-55610 110250-55520 102103-55520 STRAINER ASSY, FUEL ELEMENT, FUEL ELEMENT CUP, STRAINER COVER, STRAINER RING, RETAINING GASKET O-RING 111154-51900 PLUG 2 2 101720-51900 PLUG (A=EXXX) (B=EXXX) 2 2 2 16 17 17-1 2 1 1 23418-060000 124220-35240 124220-35230 24311-000120 124790-55800 124790-55810 (C=EXXX) 724790-55900 1 1 1 26716-080002 26116-060152 26116-060402 1 1 22212-060000 22217-060000 1 22217-060000 Remarks (1)NOT ILLUSTRATED. 1 1 1 24 25 26 1 1 1 27 28 29 1 1 1 30 31 32 1 1 1 33 34 35 1 1 1 36 37 38 1 1 1 1 1 1 1 1 1 1 1 1 1 N 1 1 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N (E) 1 1 N 2 2 2 2 2 2 S 2 2 2 2 N 2 2 Z R (F) N 1 1 1 1 1 1 124772-59810 121370-59810 124465-59810 121250-59830 124772-59820 121370-59820 124465-59800 121250-59820 121370-59830 121250-59810 124460-59850 124460-59860 26557-060082 26117-060109 121250-59850 123325-59100 123325-59110 121250-59860 PIPE (A), F. INJECT. PIPE (1), F. INJECT. PIPE (B), F. INJECT. PIPE (3), F. INJECT. PIPE (B), F. INJECT. PIPE (2), F. INJECT. PIPE (A), F. INJECT. PIPE (2), F. INJECT. PIPE (3), F. INJECT. PIPE (1), F. INJECT. RETAINER (A) RETAINER (B) SCREW M 6X 8 BOLT M 6X 10 PLATED BRACKET (A) RETAINER COVER RETAINER (B) N (D=E/#82324) 2 2 (D=E/#82324) (D=EXXX) SPRING WASHER 6 (C=E/#82415) 21 22 23 1 1 SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) 20-2 (D) (D=E/#80181) NUT M 8 BOLT M 6X 15 PLATED BOLT M 6X 40 PLATED (C=E/#82415) 20 20-1 1 1 BRACKET, STRAINER (C=E/#82415) 18 19 19-1 (B) (D=EXXX) GASKET 6, NYLON SPRING BOLT O-RING 1A P 12.0 BRACKET, STRAINER BRACKET, STRAINER (C=E/#80226) 1 (C) I (A) (B=EXXX) 24341-000440 O-RING 1A S-44.0 2 (A=E/#86617) (B=E/#82525) 2 124220-35270 RING 13 14 15 17-2 ------------------ Q'TY ------------------ DESCRIPTION 121370-55600 STRAINER ASSY, FUEL 1 1 121370-55601 STRAINER ASSY, FUEL (A=E/#85483) (B=E/#81654) 2 5 6 10-2 PARTS NO. (D)=3QM (E)= (F)= (D=E/#82324) 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 2 2 1 1 2 2 1 2 2 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 15.FUEL SYSTEM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.15.FUEL SYSTEM REF. Remarks (1)NOT ILLUSTRATED. LEV. 39 40 41 1 1 1 42 43 44 2 2 2 45 46 47 2 1 1 48 49 50 2 2 2 51 52 53 2 2 1 54 55 56 2 2 1 57 58 59 1 1 1 60 61 62 1 1 1 63 64 65 1 1 1 66 67 68 1 1 1 69 70 71 1 1 1 72 73 74 1 1 1 75 75-1 1 1 (A=EXXX) 76 77 78 1 1 1 79 80 81 1 1 1 82 83 84 1 1 1 85 86 87 1 1 1 88 1 PARTS NO. 26117-060169 121370-59010 124790-59010 101304-59020 124223-59850 104264-59020 124460-59050 121370-59030 124790-59030 101304-59020 105582-59020 120445-59220 104264-59030 124460-59050 124790-59040 104264-59030 124460-59050 124770-59160 103854-59200 111154-51900 43400-500390 23414-120000 23857-060000 23857-120000 23857-100000 23414-120000 23414-180000 23414-160000 105582-59150 124772-59650 124772-59660 124772-59670 23414-080000 105582-52010 124223-01850 26117-060209 22212-060000 22217-060000 (B=EXXX) 124772-59500 121370-59500 124790-59501 121390-59501 101147-59810 23414-080000 124770-59600 124770-59610 26117-060109 121400-39240 124223-59400 83213-003012 83211-004013 ------------------ Q'TY ------------------ DESCRIPTION BOLT M 6X 16 PLATED PIPE ASSY, FUEL OIL PIPE (A) ASSY, FUEL JOINT 12, PIPE JOINT, PIPE JOINT 12, PIPE CLAMP PIPE (B) ASSY, FUEL PIPE (B) ASSY, FUEL JOINT 12, PIPE JOINT, PIPE JOINT, PIPE JOINT 8, PIPE CLAMP PIPE ASSY, FUEL JOINT 8, PIPE CLAMP RETAINER (A) BOLT, PIPE JOINT PLUG SEAL WASHER 6S GASKET 12, ROUND JOINT BOLT 6 JOINT BOLT 12 JOINT BOLT 10 GASKET 12, ROUND GASKET 18, ROUND GASKET 16, ROUND BOLT, PIPE JOINT UNION J0INT CAP NUT GASKET 8, ROUND PUMP ASSY, FUEL FEED GASKET, FEED PUMP BOLT M 6X 20 PLATED SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) PIPE ASSY, FUEL PIPE, FUEL RETURN PIPE, FUEL RETURN PIPE, FUEL RETURN BOLT 8, PIPE JOINT GASKET 8, ROUND RETAINER, PIPE RETAINER, PIPE BOLT M 6X 10 PLATED RETAINER JOINT TANK (30L), FUEL TANK (40L), FUEL (D)=3QM (E)= (F)= (A) (B) 1 4 1 2 2 2 1 2 1 1 1 1 1 2 (C) (D) I R (F) 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 3 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 1 1 1 1 2 2 2 1 1 4 (E) 1 4 1 1 1 1 2 1 1 1 1 3 1 1 3 1 1 3 1 1 3 1 1 2 1 1 2 1 1 2 1 1 2 2 2 2 2 2 2 2 2 N (D=EXXX) 1 1 1 3 6 3 6 1 1 3 1 1 3 1 1 1 1 2 4 1 1 1 3 6 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 16.REMOTE-CONTROL DEVICE(OPTIONAL) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.16.REMOTE-CONTROL DEVICE(OPTIONAL) REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 3 1 1 1 4 5 6 1 1 1 7 8 9 1 2 2 10 11 12 2 2 2 13 14 15 2 2 2 15-1 16 17 18 19 20 21 Remarks (1)NOT ILLUSTRATED. 124772-86100 121370-86101 124790-86100 104214-86030 41710-000860 22272-000070 704211-67600 41710-500130 41710-000410 41710-000400 41710-500140 41710-500160 26117-060169 26716-060002 22212-060000 22217-060000 2 (A=EXXX) (B=EXXX) 1 41710-500090 41710-000380 1 1 41710-500100 1 41710-500110 1 1 124772-67110 121370-67100 BRACKET, REMOTE-CONT BRACKET, REMOTE-CONT BRACKET, REMOTE-CONT CONNECTOR PIN CIRCLIP E- 7 REMOTE-CONTROL SET LEVER CLAMP CLEVIS BRAKE NUT BOLT M 6X 16 PLATED NUT 6 SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) CABLE,REMO-CON CABLE L=4000 CABLE,REMO-CON CABLE,REMO-CON BRACKET, CABLE BRACKET, CABLE (B) (C) (D) 1 1 1 1 1 1 1 1 (E) I R (F) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N (D=EXXX) 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 17.GOVERNOR (A)=2QM20 (B)=3QM30 (C)=2QM Fig.17.GOVERNOR REF. 1 1-1 LEV. 1 1 PARTS NO. 724770-61520 724790-61520 2 2-1 2 2 124770-61110 124790-61110 SUPPORT ASSY, GOV. SUPPORT ASSY, GOV. 2 2 124450-61220 124790-61220 4 4-1 2 2 124450-61200 124790-61200 5 5-1 5-2 22411-200200 5-3 2 22417-200200 2 22117-060000 7 8 8-1 1 1 1 124550-61600 124450-66460 124790-66460 9 9-1 12 13 1 1 2 2 724770-66530 724790-66530 124790-66950 22113-040000 2 22414-160100 15 16 2 1 17 18 18-1 1 1 1 19 20 21 22 22-1 124450-66040 22322-030180 24311-000070 103854-66420 124550-66420 (A=EXXX) 1 124550-66370 1 22451-100000 1 1 1 135210-61090 124460-66611 124790-66600 Remarks (1)A PART ADDED AND/OR CHANGED DUE TO CHANGE OF GOVERNOR FROM THE 2-POINT TYPE TO THE 3-POINT TYPE FROM JULY, 1976. CHANGED FROM E/#80394 FOR 2QM AND E/#80346 FOR 3QM. 1 1 25 26 27 1 1 1 28 29 29-1 1 1 1 124770-66510 124450-66520 124450-66550 124465-66400 121250-66400 124450-66411 124450-66420 124790-66420 1 2 3 2 3 S 1 2 3 2 3 S 1 4 4 (F) 2 2 4 4 N 6 6 K 1 6 6 N 6 6 W 1 1 1 1 1 1 1 S 1 1 1 1 R 1 1 W 1 1 1 W 1 1 1 W 1 (D=E/#80346) (D=EXXX) (D=E/#80346) 1 1 1 1 1 (D=E/#80346) 1 (C=EXXX) (D=EXXX) (C=E/#80394) (D=E/#80346) 1 PIN WASHER 4 (D=E/#80346) COTTER PIN 1.6X10 (D=E/#80346) SHAFT, REGULATOR TAPER PIN 3X18 O-RING 1A P-7.0 SCREW, ADJUST SCREW, ADJUST 1 2 1 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N (C=EXXX) LOCK NUT M 6 WIRE 1.0 LEAD LEVER ASSY, GOV. LEVER, GOVERNOR (C=E/#80394) 23 24 2 4 4 HANDLE ASSY, REGULAT HANDLE ASSY, REGLAT (C=E/#80394) S (E) (D=E/#80346) SLEEVE, GOVERNOR BRACKET, SPRING BRACKET, SPRING (C=E/#80394) 14 1 WASHER 6 (C=E/#80394) 1 1 1 1 COTTER PIN 2.0X20 (C=E/#80394) 1 1 1 2 (C=EXXX) 6 1 1 PIN 2.0* 20 (C=E/#80394) S (D) (D=E/#80346) 22411-200200 PIN 2.0* 20 2 2 22417-200200 COTTER PIN 2.0X20 (A=EXXX) (B=EXXX) 2 1 1 (C) (D=E/#80346) WEIGHT, GOVERNOR WEIGHT, GOVERNOR (C=E/#80394) R (B) 1 PIN, GOVERNOR WEIGHT PIN, GOVERNOR WEIGHT (C=E/#80394) I (A) (D=E/#80346) SUPPORT, GOVERNOR SUPPORT, GOV. WEIGHT (C=E/#80394) 3 3-1 ------------------ Q'TY ------------------ DESCRIPTION (C=E/#80394) (D)=3QM (E)= (F)= SUPPORT, GOVERNOR CAP NUT PIN, GOV. LEVER LINK, GOVERNOR LINK, GOVERNOR SCREW CLAMP SPACER S 1 (D=E/#80346) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 17.GOVERNOR (A)=2QM20 (B)=3QM30 (C)=2QM Fig.17.GOVERNOR REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) (C=E/#80236) 29-2 1 124450-66420 1 124790-66150 (C) (D) 1 1 (E) I R S 1 (F) (D=E/#80226) CLAMP (C=E/#80394) 30 (B) (D=E/#80346) SPRING, IDLE 1 W 1 S 1 N (C=E/#80236) 30-1 1 124790-66200 SPRING, IDLE 1 (C=E/#80394) 30-2 1 124790-66201 SPRING, IDLE (C=*1976.11) 31 1 121390-66150 SPRING, IDLE 1 W 1 S 1 N 1 1 1 1 S 1 1 W (D=E/#80226) 31-1 1 124790-66200 SPRING, IDLE (D=E/#80346) 31-2 1 124790-66201 SPRING, IDLE (D=*1976.11) 32 32-1 1 1 124772-66010 124790-66010 SPRING, REGULATOR SPRING, REGULATOR (C=E/#80394) 33 1 124790-66081 34 35 36 37 38 39 39-1 1 22411-200200 26557-060082 26117-060129 40 40-1 1 1 22212-060000 22217-060000 Remarks (1)A PART ADDED AND/OR CHANGED DUE TO CHANGE OF GOVERNOR FROM THE 2-POINT TYPE TO THE 3-POINT TYPE FROM JULY, 1976. CHANGED FROM E/#80394 FOR 2QM AND E/#80346 FOR 3QM. 1 1 2 44 45 46 2 2 2 47 48 49 2 1 2 50 51 52 2 2 2 53 54 54A 2 2 2 55 56 57 2 1 2 58 59 60 2 2 2 124450-66430 124770-66700 124770-66711 124770-66731 124770-66720 22137-050000 22272-000040 124772-66700 124772-66710 124772-66730 124772-66720 124772-66760 22272-000040 124772-66750 26113-050128 26753-050002 124772-66200 124772-66210 124772-66220 22113-050000 22414-160100 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N 1 1 1 1 N SPACER ADJUSTER ASSY BODY, IDLE ADJUSTOR PIN, IDLE ADJUSTOR SPRING, ADJUSTER WASHER 5, POLISHED CIRCLIP E- 4 ADJUSTER ASSY BODY, IDLE ADJUSTOR PIN, IDLE ADJUSTOR SPRING, ADJUSTER WASHER CIRCLIP E- 4 LOCK NUT M12 BOLT M 5X 12 NUT M 5 JOINT ASSY CLEVIS PIN WASHER 5 COTTER PIN 1.6X10 N (D=EXXX) (D=EXXX) SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) 41 42 43 (D=E/#80226) SCREW M 6X 8 BOLT M 6X 12 PLATED (C=EXXX) 1 (D=E/#80346) PIN 2.0* 20 22417-200200 COTTER PIN 2.0X20 1 (A=EXXX) (B=EXXX) (C=EXXX) 1 23414-060000 GASKET 6, ROUND 26756-050002 LOCK NUT M 5 PLATED 1 1 22360-060000 SNAP PIN 6 1 124460-66400 WASHER 1 1 1 SPRING, RETURN (C=E/#80236) 34-1 1 (D=EXXX) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 17.GOVERNOR (A)=2QM20 (B)=3QM30 (C)=2QM Fig.17.GOVERNOR REF. PARTS NO. 124772-66090 124772-66890 23414-080000 26667-080002 26116-060086 61 62 63 1 1 1 64 65 1 1 (A=E/#82023) ------------------ Q'TY ------------------ DESCRIPTION SPRING, RETURN LOCK NUT GASKET 8, ROUND CAP NUT M 8 BOLT M 6X 8 PLATED (C=E/#80266) (D=E/#80226) (D=E/#80226) 67 22451-100000 WIRE 1.0 1 (A=E/#82023) (B=E/#80111) (C=E/#80256) 1 135210-61090 LEAD 68 69 (A=E/#82023) (B=E/#80111) (C=E/#80256) 1 124772-66800 CONTROLLER ASSY 2 124772-66810 SHAFT, CONTROL 66 70 70-1 71 71-1 124772-66830 RETAINER 2 2 124772-66840 RETAINER (A=*1976.07) (B=*1976.07) (C=*1976.07) 2 1 1 75 76 76-1 1 1 1 22272-000040 124770-66740 124772-66740 124790-66740 26757-100002 26756-100002 2 2 2 82 83 84 2 2 2 85 86 87 2 2 2 88 89 90 2 2 2 91 92 93 2 1 1 94 95 96 1 1 1 97 98 99 1 1 1 100 100-1 1 1 (A=EXXX) 1 1 1 41701-000221 26584-080552 26584-080452 125310-67280 125310-67290 41701-000241 41701-000260 41701-000281 22322-040300 125310-67270 125310-67260 41701-000361 41701-001240 41701-000430 41701-000440 41701-000450 41701-000460 41701-000470 124772-67110 121370-67100 26117-060129 22212-060000 22217-060000 (B=EXXX) 26557-050102 22212-050000 22217-050000 (C) (D) (F) 1 1 2 1 1 2 1 2 1 2 1 1 1 1 1 1 1 1 W 1 1 1 1 W 1 1 1 1 W 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 2 S 1 1 1 1 1 1 1 1 W 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 3 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 2 (D=EXXX) (D=*1976.07) COVER, HANDLE MOUNT SCREW M 8X 55 SCREW M 8X 45 BOLT LOCK NUT LEVER SHAFT HANDLE TAPER PIN 4X30 RETAINER, HANDLE GRIP, HANDLE PIN WASHER CABLE,REMO-CON. CABLE,REMO-CON. CABLE,REMO-CON. CABLE,REMO-CON. CABLE,REMO-CON. BRACKET, CABLE BRACKET, CABLE BOLT M 6X 12 PLATED SPRING WASHER 6 SPRING WASHER 6 SCREW M 5X 10 SPRING WASHER 5 SPRING WASHER 5 R (B) (D=E/#80226) CIRCLIP E- 4 BRACKET, ADJUSTER BRACKET, ADJUSTER BRACKET, ADJUSTER LOCK NUT 10 LOCK NUT M10 PLATED (C=EXXX) (E) I (A) (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 1 81701-000101 HANDLE ASSY,REMO-CON 2 41701-000201 BRACKET 79 80 81 101 102 102-1 (B=E/#80111) 124772-66820 SPRING, CONTROLLER 2 2 124772-66830 RETAINER (A=EXXX) (B=EXXX) (C=EXXX) 72 73 74 77 78 Remarks (1)A PART ADDED AND/OR CHANGED DUE TO CHANGE OF GOVERNOR FROM THE 2-POINT TYPE TO THE 3-POINT TYPE FROM JULY, 1976. CHANGED FROM E/#80394 FOR 2QM AND E/#80346 FOR 3QM. LEV. (D)=3QM (E)= (F)= N 1 1 2 1 1 2 1 1 2 1 1 2 2 2 2 2 2 2 2 2 N 2 2 2 2 2 2 2 2 2 2 2 2 N (D=EXXX) ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 17.GOVERNOR (A)=2QM20 (B)=3QM30 (C)=2QM Fig.17.GOVERNOR REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) (A=EXXX) Remarks (1)A PART ADDED AND/OR CHANGED DUE TO CHANGE OF GOVERNOR FROM THE 2-POINT TYPE TO THE 3-POINT TYPE FROM JULY, 1976. CHANGED FROM E/#80394 FOR 2QM AND E/#80346 FOR 3QM. (B=EXXX) (C=EXXX) (B) (C) (D) (E) I R (F) (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 18.HAND STARTING MECHANISM (A)=2QM20 (B)=3QM30 (C)=2QM Fig.18.HAND STARTING MECHANISM REF. LEV. 1 2 3 1 1 2 4 5 6 2 2 2 7 8 9 2 2 2 10 11 12 2 2 2 13 14 15 2 2 2 16 17 18 2 2 2 19 20 21 2 2 2 21-1 22 23 24 25 25-1 26 27 28 29 29-1 30 PARTS NO. 724770-76110 724790-76110 124770-76200 124790-76200 22312-100500 124770-76010 26117-060129 24104-062054 124770-76280 124790-76250 22242-000250 124770-76300 124790-76300 22252-000520 24764-010000 124770-76180 125110-76800 25210-430670 124770-76100 22137-100000 22212-100000 22217-100000 2 (A=EXXX) (B=EXXX) 2 26736-100002 26226-100382 2 2 26716-100002 2 22212-100000 ------------------ Q'TY ------------------ DESCRIPTION CHAIN ASSY, STARTING CHAIN ASSY, STARTING SHAFT, STARTING SHAFT, STARTING PIN 10X50,STRAIGHT SPROCKET (A) BOLT M 6X 12 PLATED BALL BEARING SPACER SPACER CIRCLIP 25S BRACKET BRACKET CIRCLIP 52 NIPPLE M6F, GREASE BOLT, CHAIN COVER HANDLE, STARTING CHAIN 43X67 SPROCKET WASHER 10,POLISHED WASHER, 10 SPRING WASHER 10 (C=EXXX) 22217-100000 2 (A=EXXX) (B=EXXX) 2 22137-100000 WASHER 10,POLISHED 124770-76170 COVER, CHAIN 2 2 124790-76170 COVER, CHAIN 2 22212-060000 SPRING WASHER 6 31 32 33 2 2 2 34 35 35-1 2 2 2 124790-76190 26117-060129 124790-76310 26116-080902 22212-080000 22217-080000 (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 1 6 2 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 1 1 6 6 1 5 1 5 6 6 5 5 2 2 1 1 1 4 1 1 4 1 4 4 4 4 4 4 (E) I R (F) N N N (D=EXXX) BRACKET BOLT M 6X 12 PLATED RETAINER BOLT M 8X 90 PLATED SPRING WASHER 8 SPRING WASHER 8 (C=EXXX) (A) (D=EXXX) NUT M10 STUD M10X 38 PLATED NUT 10 WASHER, 10 SPRING WASHER 10 22217-060000 SPRING WASHER 6 2 (A=EXXX) (B=EXXX) (C=EXXX) 2 22137-060000 WASHER 6, POLISHED (D)=3QM (E)= (F)= N (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 19.STARTING MOTOR & GENERATOR (A)=2QM20 (B)=3QM30 (C)=2QM Fig.19.STARTING MOTOR & GENERATOR REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 3 1 1 1 4 4-1 1 1 (A=EXXX) 5 6 7 1 1 1 8 9 9-1 1 1 1 10 11 I 12 13 14 15 124770-77010 121370-77010 121370-77200 124772-42780 124772-77350 (B=EXXX) 124240-42291 26116-080222 26116-080302 26716-080002 22212-080000 22217-080000 STARTER STARTER (S12-47) GENERATOR V-BELT (A-32) V-BELT (A-32) (C=EXXX) 1 1 1 124770-77250 124770-77330 124790-77330 124070-77800 BRACKET, GENERATOR ADJUSTER, BELT ADJUSTER, BELT BOX, FUSE 1 (A=E/#85658) (B=E/#81661) 15-1 1 124070-77801 BOX, FUSE (304) (A=E/#87587) (B=E/#83271) 16 1 26557-050162 SCREW M 5X 16 (A=E/#85658) (B=E/#81661) 17 18 19 20 21 22 22212-050000 SPRING WASHER 5 1 (A=E/#85658) (B=E/#81661) 1 124772-77810 BRACKET, FUSE BOX (A=E/#85658) (B=E/#81661) 1 26116-080142 BOLT 8X14 (A=E/#85658) (B=E/#81661) 105584-59870 RETAINER 1 (A=E/#85658) (B=E/#81661) 1 26557-050082 SCREW M 5X 8 (A=E/#85658) (B=E/#81661) 1 22212-060000 SPRING WASHER 6 (A=E/#85658) (B=E/#81661) 46150-003660 FUSE 1 (A=E/#85658) (B=E/#81661) 23-1 1 46150-003680 FUSE 30A (A=E/#87587) (B=E/#83271) 24 1 124770-77081 GASKET 23 Remarks (1)NOT ILLUSTRATED. R (C) (D) (F) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 1 2 3 1 2 3 3 6 6 3 6 6 3 5 5 3 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 W 1 1 N 2 2 W 2 2 W 1 1 W 2 2 W 1 1 W 1 1 W 1 1 W 1 1 W 1 1 1 N 1 1 1 N (D=EXXX) V-BELT (A-37) BOLT M 8X 22 PLATED BOLT 8X30 NUT M 8 SPRING WASHER 8 SPRING WASHER 8 (A=EXXX) (B=EXXX) (C=EXXX) 1 121250-77210 COVER, GENERATOR 1 22137-080000 WASHER 8, POLISHED (E) I (B) N (D=EXXX) 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 20.INSTRUMENT PANEL (A)=2QM20 (B)=3QM30 (C)=2QM Fig.20.INSTRUMENT PANEL REF. 1 2 3 4 5 6 7 8 8-1 8-2 9 9-1 9-2 LEV. PARTS NO. ------------------ Q'TY ------------------ DESCRIPTION 124770-91000 PANEL ASSY, INSTRUM. 1 (A=E/#85657) (B=E/#81660) 1 124790-91000 PANEL ASSY, INSTRUM. 124770-91010 HOUSING, PANEL 2 2 124770-91200 COVER 80 2 101400-55440 LABEL, "YANMAR" 2 2 2 124770-91220 124770-91230 124770-91250 123482-91250 COVER 52 COVER 16 SWITCH W/KEY SWITCH W/KEY 2 (A=EXXX) (B=EXXX) (C=EXXX) 2 123482-91251 SWITCH W/KEY (A=*1978.09) (B=*1978.09) (C=*1978.09) 3 124770-91290 KEY 3 123482-91290 KEY, SWITCH 2 2 3 13 14 15 2 2 2 16 17 18 2 2 2 18-1 124770-91260 124770-91040 46150-001110 124770-91270 124770-91030 124790-91400 124790-91430 124790-91440 46150-004530 123682-91340 21 22 22-1 124160-39450 121370-77920 124772-77920 1 124790-77920 Remarks (1)NEW TYPE REFER TO FIG.21. (2)EXCLUSIVE FOR 123482-91250 (3)EXCLUSIVE FOR 123482-91251 (4)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.20. (5)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.18-1. (6)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.19-1. (7)REFER TO FIG.21 FOR ILLUSTRATED. 23 1 24 25 26 1 1 1 27 28 29 1 1 1 124770-77980 124770-77940 124770-77950 124770-77960 26117-080129 22137-080000 124223-77840 1 1 124790-91710 124790-91720 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 N 1 1 1 1 N 1 1 1 1 1 1 1 1 S 2 1 1 1 1 S 3 1 3 3 1 3 3 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 F 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 HARNESS, WIRE BRACKET (R) BRACKET (L) 1 1 1 1 N 1 1 S W 1 1 1 1 N 1 1 F 5 F 6 (D=E/#81847) CAP PROTECTOR CLAMP(A) CLAMP (B) BOLT M 8X 12 WASHER 8, POLISHED TERMINAL SET (C=E/#81931) 30 31 1 (D=E/#81847) SWITCH, OIL PRESSURE HARNESS, WIRE HARNESS, WIRE (C=E/#81931) 1 1 (D=EXXX) (A=*1978.05) (B=*1978.05) 22-2 1 124772-77921 HARNESS, WIRE (A=E/#86262) (B=E/#82258) 22-3 Z (F) (D=EXXX) 1 124790-91440 WIRE (B) (A=E/#86262) (B=E/#82258) 1 1 1 (E) (D=EXXX) 2 (A=E/#86262) (B=E/#82258) 19 2 46150-400590 SENDER UNIT, CW 144626-91590 SENDER UNIT, CW 19-1 2 (C=EXXX) 19-2 2 144626-91570 SENDER UNIT, CW 20 (D) R (B) (D=*1978.09) CAP, SWITCH LAMP, PILOT BULB(12V3W/G11.BA9S) CLAMP HARNESS, WIRE THERMOMETER, WATER WIRE (A) WIRE (B) SENDER UNIT, CW SENDER UNIT, CW (C=E/#81931) (C) I (A) (D=EXXX) (A=EXXX) (B=EXXX) (C=EXXX) 3 123482-91291 KEY, SWITCH (A=EXXX) (B=EXXX) (C=EXXX) 10 11 12 (D)=3QM (E)= (F)= 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Z (D=E/#81847) ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 20.INSTRUMENT PANEL (A)=2QM20 (B)=3QM30 (C)=2QM Fig.20.INSTRUMENT PANEL REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 32 33 34 1 1 1 35 35-1 1 1 26113-040259 26713-040002 22113-040000 22212-040000 22217-040000 BOLT M 8X 25 NUT M 4 WASHER 4 SPRING WASHER 4 SPRING WASHER 4 (C=EXXX) 36 37 37-1 38 39 40 41 42 43 1 1 1 124770-91100 124770-91160 124770-91161 46150-001110 BULB(12V3W/G11.BA9S) 1 (A=*1978.10) (B=*1978.10) 1 124070-91160 SENDER UNIT Remarks (1)NEW TYPE REFER TO FIG.21. (2)EXCLUSIVE FOR 123482-91250 (3)EXCLUSIVE FOR 123482-91251 (4)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.20. (5)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.18-1. (6)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.19-1. (7)REFER TO FIG.21 FOR ILLUSTRATED. (E) I (C) (D) 4 4 4 4 4 4 4 4 4 4 N N R (F) (D=EXXX) TACHOMETER, ELECTRIC TACHOMETER, ELECTRIC SENCER (A=EXXX) (B=EXXX) (C=EXXX) 1 123310-77640 SWITCH, BATTERY 1 22724-800380 SCREW 8X 38 124770-91500 CORD 1 1 104571-91100 TACHOMETER (A=*1978.10) (B=*1978.10) (A=*1978.10) (B) 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 2 1 1 1 1 1 1 1 1 W 7 1 1 W (D=EXXX) W 7 (B=*1978.10) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 21.INSTRUMENT PANEL (A)=2QM20 (B)=3QM30 (C)=2QM Fig.21.INSTRUMENT PANEL REF. LEV. 1 2 3 1 2 2 4 5 6 2 2 3 7 8 9 2 2 2 10 11 12 2 2 3 13 14 15 1 2 2 PARTS NO. 124070-91000 124070-91010 124770-91200 124770-91230 124070-91250 124070-91290 124070-91300 124070-91310 104271-91350 124070-91030 124770-91040 124770-91040 104571-91100 46150-001110 124070-91160 DESCRIPTION PANEL ASSY, INSTRUM. HOUSING, PANEL COVER 80 COVER 16 SWITCH W/KEY KEY, SWITCH SWITCH SWITCH BUZZER, ALARM HARNESS, WIRE LAMP, PILOT LAMP, PILOT TACHOMETER BULB(12V3W/G11.BA9S) SENDER UNIT (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 1 3 3 1 1 1 1 1 1 (C) (D) (E) I R (F) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 22.CLUTCH HOUSING (A)=2QM20 (B)=3QM30 (C)=2QM Fig.22.CLUTCH HOUSING REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 1-1 724770-82550 1 1 724770-82551 (A=EXXX) HOUSING ASSY, CLUTCH HOUSING ASSY, CLUTCH 776000-02550 124770-82900 176000-02901 101104-01760 23883-160002 26114-100222 23414-160000 23414-100000 23873-010000 26226-100222 26226-100202 22117-100000 26716-100002 124770-82031 26116-100302 26116-100352 26113-100302 26113-100352 26216-100252 26716-100002 22212-100000 22217-100000 HOUSING ASSY, CLUTCH CAP W/DIPSTICK CAP W/DIPSTICK GASKET, CAP PLUG 16 BOLT M10X 22 GASKET 16, ROUND GASKET 10, ROUND PLUG PT 1/8 STUD M10X 22 PLATED STUD M10X 20 PLATED WASHER 10 NUT 10 PACKING BOLT 10X30 BOLT 10X35 BOLT M10X 30 BOLT 10* 35 STUD M10X 25 PLATED NUT 10 WASHER, 10 SPRING WASHER 10 2 5 6 1 2 2 7 8 9 2 2 2 10 11 12 2 2 2 13 14 15 2 2 2 16 17 18 2 1 1 19 20 21 1 1 1 22 23 24 1 1 1 24-1 25 26 27 28 1 (A=EXXX) (B=EXXX) 1 22117-100000 22113-100000 1 1 22332-080220 1 26756-080002 29 30 31 1 1 1 32 33 33-1 1 1 1 34 35 (A=EXXX) 1 104214-84450 1 176000-04521 36 37 38 1 1 1 39 40 41 1 1 1 42 43 44 1 1 1 45 45-1 1 1 (A=EXXX) 46 47 50 124770-82810 176000-02801 176000-02811 26116-100252 22212-100000 22217-100000 1 1 2 26116-080202 26756-080002 104214-86030 41710-000860 22272-000070 124772-86100 121370-86101 124790-86100 26116-060129 22212-060000 22217-060000 (B=EXXX) 120220-84472 105582-84470 120220-84300 (C=EXXX) (D) 1 1 (E) I R (F) N 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 8 4 4 8 4 4 8 4 4 12 1 12 1 12 1 6 6 6 1 1 1 1 1 1 6 2 2 2 2 4 4 10 4 4 10 4 4 10 4 4 10 10 10 10 10 10 10 10 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 2 2 N 2 8 8 8 HANDLE, OPERATING LEVER BOLT M 8X 20 PLATED LOCK NUT M 8 PLATED CONNECTOR PIN CIRCLIP E- 7 BRACKET, REMOTE-CONT BRACKET, REMOTE-CONT BRACKET, REMOTE-CONT BOLT M 6X 12 PLATED SPRING WASHER 6 SPRING WASHER 6 FORK ASSY, LEVER FORK ASSY, LEVER BUSH, SHIFTER (C) (D=EXXX) WASHER 10 WASHER 10 TAPER PIN 8X22 LOCK NUT M 8 PLATED BRACKET BRACKET (A) BRACKET (B) BOLT M10X 25 PLATED WASHER, 10 SPRING WASHER 10 (C=EXXX) (B) N 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 2 1 1 2 2 1 2 1 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 N (D=EXXX) 1 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 22.CLUTCH HOUSING (A)=2QM20 (B)=3QM30 (C)=2QM Fig.22.CLUTCH HOUSING REF. LEV. 51 52 53 2 2 1 54 55 56 1 1 1 57 58 59 1 1 1 60 61 64 1 1 2 65 66 67 1 1 1 68 69 70 1 1 1 71 72 73 1 1 1 74 75 76 1 1 1 77 78 79 1 1 1 80 81 82 1 1 1 82-1 1 PARTS NO. 22312-080180 22322-030220 105582-84150 22351-060032 24311-000180 24311-000200 22512-050180 22522-050160 120220-84130 22242-000180 704211-82500 22312-040120 705582-82500 104211-82090 105582-82090 26116-080352 26116-080302 26116-080552 26116-080702 26116-080902 26116-080852 26116-080202 22117-080000 124210-83360 105582-82120 120220-82130 105582-82130 176000-02201 26117-060129 22212-060000 22217-060000 (B=EXXX) 83 1 84 85 86 1 1 1 105582-82780 26756-080002 26668-080002 23414-080000 ------------------ Q'TY ------------------ DESCRIPTION PARALLEL PIN 8X16 TAPER PIN 3X22 SHAFT SPRING PIN 6X32 O-RING 1A P-18.0 O-RING 1A P-20.0 KEY 5X 18 KEY 5X16 RETAINER, O-RING CIRCLIP 18 COVER ASSY, REAR PARALLEL PIN 4X12 COVER ASSY, REAR PACKING PACKING, REAR COVER BOLT M 8X 35 BOLT 8X30 BOLT 8X55 BOLT M 8X 70 PLATED BOLT M 8X 90 PLATED BOLT M 8X 85 PLATED BOLT M 8X 20 PLATED WASHER 8 CLAW CLAW SPRING SPRING SPRING BOLT M 6X 12 PLATED SPRING WASHER 6 SPRING WASHER 6 (C=EXXX) BOLT LOCK NUT M 8 PLATED NUT,CAP 8 GASKET 8, ROUND (D)=3QM (E)= (F)= (A) (B) (C) (D) 2 2 2 2 1 2 2 1 2 2 1 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 6 6 6 1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 2 2 2 1 1 1 1 1 2 1 1 2 1 1 2 (E) I R (F) 2 1 2 1 1 2 1 1 1 2 2 1 1 N (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 23.FRICTION DISC & AHEAD SHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.23.FRICTION DISC & AHEAD SHAFT REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 1 1 1 4 5 6 1 2 2 11 12 13 3 3 3 14 15 16 3 3 3 17 18 19 3 3 2 20 21 22 2 2 2 23 24 25 2 2 2 26 27 28 2 2 2 29 30 31 2 2 2 32 33 34 2 2 2 35 36 37 2 2 2 38 39 40 2 2 3 41 42 43 3 3 2 46 47 48 3 3 3 49 50 51 3 3 2 52 53 54 2 2 2 55 56 57 2 2 2 58 59 60 2 2 2 724770-83730 776000-03730 724771-83730 776001-03730 724770-83150 776000-03720 22312-080180 22312-100180 26116-080206 122310-83380 122310-83630 122310-83390 124210-83150 22451-100000 120220-83342 176000-03150 124210-83360 124210-83370 124770-83210 176000-03201 124770-83300 176000-03300 124770-83330 176000-03330 104211-83290 120220-83290 22451-100000 24104-062054 176000-03450 120220-83200 176000-03211 22252-000550 24101-060064 120220-83250 120220-84490 120220-84120 120220-84320 22322-040400 776000-03570 176000-03860 125110-84480 125110-84490 176000-03740 125110-84520 122310-84460 122310-84470 125110-84480 125110-84490 122310-84450 124210-84402 122310-84421 124210-84410 122410-84450 124770-83520 ROTATOR(I=2.20) ASY ROTATOR(I=2.20) ASY ROTATOR(I=3.21) ASY ROTATOR(I=3.21) ASY HOUSING ASSY, CLUTCH HOUSING ASSY, CLUTCH PARALLEL PIN 8X16 PARALLEL PIN 10X 18 BOLT M 8X 20 PLATED FITTINGS, V-LEVER WASHER BOLT WASHER WIRE 1.0 PLATE, FRICT. DISC PLATE, DISC CLAW SPRING SHAFT, FORWARD SHAFT, FORWARD DISC, FRICTION DISC, FRICTION WASHER WASHER BOLT BOLT WIRE 1.0 BALL BEARING WASHER SHAFT, REVERSING SHAFT, REVERSING CIRCLIP 55 BALL BEARING SPRING SHAFT ASSY, THRUST SHAFT, SHIFTING CASE TAPER PIN 4X40 SHAFT ASSY, THRUST SPRING RETAINER RETAINER ROD W/ROLLER SHIM SPRING (A) SPRING (B) RETAINER RETAINER ROD W/ROLLER LEVER(V) LINK PIN PIN PINION Z=25 I=2.20 (B) (C) (D) 1 1 1 1 1 1 1 1 1 6 3 9 3 6 3 9 2 2 4 3 3 6 3 2 6 3 3 6 3 3 3 1 3 3 1 3 3 1 3 3 1 1 1 2 2 2 4 4 4 24 2 24 2 24 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 3 3 3 3 1 3 3 1 3 3 1 (E) I R (F) 1 1 1 2 6 1 4 4 1 2 2 15 2 1 1 1 1 2 1 1 1 1 2 2 2 2 2 2 2 4 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 23.FRICTION DISC & AHEAD SHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.23.FRICTION DISC & AHEAD SHAFT REF. LEV. 61 62 63 2 2 2 64 65 66 2 2 2 67 68 69 2 2 2 70 71 72 2 2 2 73 74 2 2 PARTS NO. 120221-83520 22512-070260 24101-062054 176000-03950 120220-83450 24211-025002 122310-83460 24231-025000 122310-83800 176000-03461 120220-84310 22522-040130 26887-120002 22411-300250 DESCRIPTION PINION Z=19 I=3.21 KEY 7X 26 BEARING #6205 BEARING #5205S NUT NUT M25,BEARING WASHER WASHER 25,BEARING BUSH SPACER PLATE WOODRUFF KEY 4X13 NUT M12 PIN 3.0* 25 (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (E) I R (F) 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 24.IDLE GEAR SHAFT & THRUST SHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.24.IDLE GEAR SHAFT & THRUST SHAFT REF. Remarks (1)I=2.20 (2)I=3.21 (3)2QM & 2QM20:I=3.21 2QM20 & 3QM30:I=2.2 FROM REF.NO.39 UP TO REF.NO58 IS OPTIONAL. LEV. 1 2 3 1 2 1 4 5 6 2 1 2 7 8 9 1 2 1 10 11 12 1 1 1 13 14 15 1 1 1 16 17 18 1 1 1 19 20 21 1 1 1 22 23 24 1 1 1 25 26 27 1 1 1 28 29 30 1 1 1 31 32 33 1 1 1 34 35 36 1 1 1 37 38 39 1 1 1 40 41 42 1 1 1 43 44 45 1 1 1 46 47 48 1 1 2 49 50 51 1 1 1 52 53 54 1 2 2 PARTS NO. 124770-83030 120220-83060 120221-83030 120220-83060 120220-83230 124210-83270 176000-03230 124210-83270 120220-83420 120220-83410 120220-83260 24311-000180 124770-83530 124221-83530 22512-100260 120220-83470 120220-83480 120220-83490 22242-000300 124227-83220 176000-03651 26776-200002 122310-83410 176000-03730 22512-070300 120220-82230 176000-02401 120220-82240 176000-02410 120220-82300 176000-02440 26116-100222 120220-82280 24101-062064 176000-03721 24321-000350 122310-83400 176000-03701 48110-028070 48110-030060 48110-034070 26116-100322 26716-100002 48110-032411 26756-080002 124770-85400 121370-85401 26736-100002 104214-83500 104214-83980 104214-83990 121370-83981 26450-080282 26450-100302 DESCRIPTION GEAR (Z=23/26), IDLE BUSH GEAR W/BUSH, IDLE BUSH SHAFT, IDLE GEAR PLUG SHAFT, IDLE GEAR PLUG NUT WASHER WASHER O-RING 1A P-18.0 GEAR(Z=55) I=2.20 GEAR(Z=61) I=3.21 KEY 10X 26 NUT WASHER NUT, LOCK CIRCLIP 30 SHAFT, THRUST SHAFT, THRUST LOCK NUT 20 WASHER WASHER KEY 7X 30 COVER, REAR COVER, REAR PACKING GASKET SEAL, OIL SEAL, OIL BOLT 10X22 BEARING, BALL BALL BEARING SPACER O-RING 1A G-35.0 COUPLING COUPLING (ENGINE) COUPLING 28 COUPLING 30 COUPLING 34 BOLT M10X 32 PLATED NUT 10 SCREW LOCK NUT M 8 PLATED COUPLING COUPLING NUT M10 COUPLING (28), SLIT COUPLING (20), SLIT COUPLING (1 INCH) COUPLING (25), SLIT BOLT M 8X 28 BOLT M10X 30 (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 4 4 1 1 4 4 1 1 4 1 1 4 1 1 4 1 1 1 8 1 8 1 8 (E) I R (F) 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 3 2 1 8 1 1 1 1 4 6 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 24.IDLE GEAR SHAFT & THRUST SHAFT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.24.IDLE GEAR SHAFT & THRUST SHAFT REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 55 56 124772-85910 1 (A=*1978.03) 1 121370-85910 (B=*1978.03) 57 58 1 105583-85900 (A=*1978.03) 1 124323-85900 FITTINGS, COUPLING COUPLING 22 COUPLING (C) (D) 1 (E) I R (F) W 1 RING, COUPLING (C=*1978.03) (B) 1 1 W (D=*1978.03) 1 W 1 W (B=*1978.03) Remarks (1)I=2.20 (2)I=3.21 (3)2QM & 2QM20:I=3.21 2QM20 & 3QM30:I=2.2 FROM REF.NO.39 UP TO REF.NO58 IS OPTIONAL. (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 25.TOOL (A)=2QM20 (B)=3QM30 (C)=2QM Fig.25.TOOL REF. 1 3 4 1 2 2 5 6 2 2 (A=EXXX) 7 Remarks (1)FROM APRIL,1978,THE OIL FEEDER IS AVAILABEL AS AN OPTIONAL. LEV. 2 PARTS NO. 704507-92100 28110-100130 28110-170190 28110-220240 28210-000150 (B=EXXX) 104200-92350 ------------------ Q'TY ------------------ DESCRIPTION SEE 704800-92100 WRENCH 10X13 WRENCH 17X19 WRENCH 22X24 FEEDER, OIL (C=EXXX) DRIVER, SCREW (D)=3QM (E)= (F)= (A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (E) I R Z 1 (F) (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 26.SPECIAL TOOL(OPTIONAL) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.26.SPECIAL TOOL(OPTIONAL) REF. LEV. 1 2 3 1 2 2 4 5 5-1 2 2 2 6 6-1 7 8 9 11 12 12-1 13 14 15 16 17 18 PARTS NO. 724770-92210 103338-92020 101400-92010 103338-92030 26717-160002 26716-160002 1 2 2 724770-92220 104200-92130 26717-120002 26716-120002 2 (A=EXXX) 1 124770-92690 101404-92140 1 1 101104-92180 1 28210-000031 1 1 28210-000070 28312-150750 ------------------ Q'TY ------------------ DESCRIPTION TOOL, CYL LINER RETAINER RETAINER BOLT NUT M16 NUT M16 (A=EXXX) (B=EXXX) (C=EXXX) 2 26717-160002 LOCK NUT M16 PLATED 2 26756-160002 LOCK NUT M16 PLATED (A=EXXX) (B=EXXX) (C=EXXX) 1 124460-92400 TOOL, MAIN-BEARING 1 103338-92100 WRENCH, END NUT TOOL, FLYWHEEL BOLT NUT 12 NUT 12 (D)=3QM (E)= (F)= (E) I (A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2 R 1 1 1 1 1 1 1 1 R 1 1 1 1 1 1 R (F) (D=EXXX) (D=EXXX) 1 2 2 1 2 2 2 2 R (C=EXXX) REPLACER, PULLEY TOOL, PISTON&RING PULLER, NOZZLE RAPPING TOOL LAPPING POWDER THICKNESS GAUGE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 27.PACKING KIT(OPTIONAL) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.27.PACKING KIT(OPTIONAL) REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 3 1 1 1 4 5 5-1 1 2 2 6 6-1 724772-92600 721370-92600 724790-92600 721390-92600 124465-01750 124465-01751 (A=EXXX) 2 121250-01750 2 121250-01751 GASKET GASKET GASKET GASKET GASKET GASKET SET SET SET SET 8 8-1 9 10 10-1 11 2 2 124160-01861 124160-01863 15 16 17 2 2 2 18 18-1 2 2 124450-11681 123210-09310 104900-11450 103854-11490 124450-11310 121370-11310 121370-11331 124460-03663 2 2 2 124460-02150 124160-34842 124160-34843 2 124160-34844 (B=EXXX) Remarks THIS FIGURE ARE NOT ILLUSTRATED. 21 22 23 2 2 2 24 25 26 2 2 2 27 28 29 2 2 2 30 31 32 2 2 2 33 34 35 2 2 2 36 37 38 2 2 2 124450-32020 124770-34730 124772-01610 124223-42020 124223-42110 145410-46110 124223-42140 121390-42140 104211-49160 121370-49160 124790-49760 124223-01850 124770-77081 124770-82031 120220-82090 105582-82090 120220-82240 176000-02410 R 1 1 1 1 1 GASKET, OIL SUMP GASKET, OIL SUMP N 1 1 N (D=EXXX) GASKET GASKET GASKET PACKING GASKET, CHAMBER INSULATOR GASKET, BONNET GASKET, BONNET GASKET, BONNET GASKET 1 1 1 1 1 1 1 1 N 1 1 1 1 1 1 1 1 N 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 4 1 3 6 1 1 4 1 1 6 2 1 3 2 1 3 N 1 1 2 2 2 2 S 1 1 1 N 1 N (D=EXXX) GASKET GASKET GASKET (B=EXXX) 20-2 I (F) (C=EXXX) (B=EXXX) 19 20 20-1 (E) 1 124240-01882 GASKET, HYD.OIL PUMP 2 (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 2 124450-44410 GASKET 2 2 2 (D) 1 (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 2 124450-01511 GASKET, GEAR HOUSING 2 124450-01512 GASKET, GEAR HOUSING (A=EXXX) (B=EXXX) (C=EXXX) (D=EXXX) 2 124770-01861 GASKET 2 124240-01881 GASKET, HYD.OIL PUMP 12 13 14 (C) 1 1 1 (B=EXXX) 7 7-1 (B) 1 1 1 1 1 (C=EXXX) 1 GASKET (D=EXXX) GASKET GASKET GASKET GASKET GASKET PACKING GASKET GASKET PACKING PACKING PACKING, THERMOSTART GASKET, FEED PUMP GASKET PACKING PACKING PACKING, REAR COVER PACKING GASKET 1 2 1 1 2 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 27.PACKING KIT(OPTIONAL) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.27.PACKING KIT(OPTIONAL) REF. Remarks THIS FIGURE ARE NOT ILLUSTRATED. LEV. 39 40 41 2 2 2 42 43 44 2 2 2 45 46 47 2 2 2 48 2 PARTS NO. 124550-51350 174307-51270 172100-53200 23414-060000 23414-080000 23414-100000 23414-120000 23414-140000 23414-160000 23414-250000 DESCRIPTION GASKET, DELIVERY GASKET GASKET GASKET 6, ROUND GASKET 8, ROUND GASKET 10, ROUND GASKET 12, ROUND GASKET 14, ROUND GASKET 16, ROUND GASKET 25,ROUND (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) (D) 2 2 2 3 3 3 2 2 2 3 3 3 5 20 5 5 20 5 5 20 5 5 20 5 20 5 5 20 5 5 20 5 5 20 5 5 5 5 5 5 (E) I R (F) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 28.SPAIR PART KIT (A)=2QM20 (B)=3QM30 (C)=2QM Fig.28.SPAIR PART KIT REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 3-1 4 4-1 1 1 2 724772-92500 721370-92500 124750-01331 124772-01330 REPAIR SET REPAIR SET GASKET, CYL. HEAD GASKET, CYL. HEAD 121370-01331 GASKET, CYL. HEAD GASKET, CYL. HEAD 2 (A=*1979.12) 2 121370-01330 2 (B) (C) (D) (E) I R (F) 1 1 1 1 N 1 1 . N (B=*1976.12) 5 2 6 7 8 2 2 2 9 10 10-1 2 2 2 11 12 2 2 2 16 17 18 2 2 2 19 20 21 Remarks THIS FIGURE ARE NOT ILLUSTRATED. (1)REFER TO FIG.20 REF.NO.18-1. GASKET, SUC.MANIFOLD GASKET, EXH.MANIFOLD GASKET GASKET GASKET RING SET RING SET (A=*1978.03) (B=*1978.03) 2 124550-35110 ELEMENT, LUB. OIL 2 104500-55710 ELEMENT, FUEL 13 14 15 18-1 124450-11900 121250-13520 124770-13130 124770-13180 124770-13170 724750-22500 724790-22500 124223-42091 124770-49200 105582-49200 27210-200300 124160-39450 46150-004530 123682-91340 IMPELLER, C. WATER THERMOSTAT THERMOSTAT ZINC, ANTI-CORROSIVE SWITCH, OIL PRESSURE SENDER UNIT, CW SENDER UNIT, CW 2 (A=E/#86262) (B=E/#82258) 2 124770-91040 LAMP, PILOT 124770-53000 NOZZLE ASSY,F.INJECT 2 2 124772-77350 V-BELT (A-32) 1 3 1 1 1 2 2 2 3 3 1 1 1 1 1 1 1 N 1 3 1 1 3 1 1 1 1 3 3 2 1 3 1 F 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 29.REPAIR KIT FOR INSPECTION (A)=2QM20 (B)=3QM30 (C)=2QM Fig.29.REPAIR KIT FOR INSPECTION REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 3 1 1 2 4 4-1 2 2 724790-11990 721390-11990 24311-000140 124465-01750 124465-01751 GASKET, SET GASKET, SET O-RING 1A P-14.0 GASKET GASKET (B) (C) (D) (E) I R (F) 1 2 1 3 1 1 N (C=EXXX) 5 5-1 2 2 121250-01750 121250-01751 GASKET, OIL SUMP GASKET, OIL SUMP 1 1 N (D=EXXX) 6 6-1 2 2 124750-01331 124772-01330 GASKET, CYL. HEAD GASKET, CYL. HEAD 1 1 N (C=EXXX) 7 7-1 2 2 121370-01330 121370-01331 GASKET, CYL. HEAD GASKET, CYL. HEAD 1 1 N (D=EXXX) Remarks THIS FIGURE ARE NOT ILLUSTRATED. 8 9 10 2 2 2 11 12 13 2 2 1 14 15 16 2 2 2 17 18 19 2 2 2 121250-12710 124450-11900 124770-13130 121250-13520 124450-44410 776000-02980 124770-82031 176000-02410 22411-300250 22451-100000 124210-83360 124210-83370 GASKET, INT.MANIFOLD GASKET, SUC.MANIFOLD GASKET GASKET, EXH.MANIFOLD GASKET GASKET SET PACKING GASKET PIN 3.0* 25 WIRE 1.0 CLAW SPRING 1 1 1 1 1 3 1 1 1 1 1 1 1 1 3 3 3 3 3 3 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 30.GENERATOR COMPONENT PART (A)=2QM20 (B)=3QM30 (C)=2QM Fig.30.GENERATOR COMPONENT PART REF. LEV. 1 2 4 1 2 3 5 6 7 2 2 3 8 10 13 3 3 3 16 19 20 3 3 3 22 23 24 4 3 3 25 26 27 3 3 3 28 29 30 2 3 3 31 32 37 3 2 2 38 39 40 2 2 2 41 2 PARTS NO. 121370-77200 XLR135Y1100 X6201SD XL135Y1200 XL135Y1300 XL135Y1301 XL135Y1302 XL135Y1303 XL135Y1310 XL135Y1311 XL135Y13200 XL135Y1803 26557-050362 XL135Y1810 XMV11305 XMV11306 121370-77950 26557-050162 XL135Y1400 XL135Y1401 X6302B 26557-040182 XL135Y1531 XL135Y1801 XL135Y1802 XL135Y1820 XB444001A 26557-050102 DESCRIPTION GENERATOR ROTOR ASSY BEARING STATOR ASSY COVER ASSY, REAR COVER, REAR SR HOLDER (+) SR HOLDER (-) TERMINAL ASSY TERMINAL ASSY BRUSH ASSY. SCREW SET SCREW M 5X 36 LOCK, BEARING CONTROL UNIT, FIELD CR ASSY REGULATOR (TR1Z-28) SCREW M 5X 16 COVER ASSY, FRONT RETAINER, BEARING BALL BEARING SCREW PULLEY ASSY BOLT, THROUGH BOLT, THROUGH COVER NUT SET, PULLEY SCREW M 5X 10 (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 2 1 1 2 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 2 3 1 2 3 1 2 3 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 (E) I R (F) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 31.STARTING MOTOR COMPONENT PART(12V 1.0KW) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.31.STARTING MOTOR COMPONENT PART(12V 1.0KW) REF. LEV. PARTS NO. (D)=3QM (E)= (F)= ------------------ Q'TY ------------------ DESCRIPTION (A) 1 2 3 1 2 2 7 10 11 2 2 3 12 13 14 3 2 3 15 16 17 2 3 3 18 19 20 2 3 2 24 25 28 2 2 2 29 30 31 2 2 2 34 35 36 2 2 2 37 37-1 2 2 (A=EXXX) 124770-77010 X211441004 X21148110 X21147155 X211482001 X21147215 X21145312 X211423001 X21145352 X21141360 X21145313 X21144314 X211426006 X21144661 X211484001 X211485001 X211416511 X211427003 X21142742 X21141742 X21148861 X21144886 X21146815 26557-040122 22212-040000 22217-040000 (B=EXXX) STARTER ARMATURE ASSY WASHER SET, THRUST STOPPER SET, PINION COIL ASSY, FIELD SCREW, POLE CORE BRUSH (+) COVER ASSY, REAR METAL HOLDER ASSY, BRUSH BRUSH(-) SPRING, BRUSH CASE ASSY, GEAR METAL, GEAR CASE BRACKET ASSY PINION ASSY LEVER ASSY. SWITCH ASSY, MAGNET. COVER (A), RUBBER COVER (B), RUBBER COVER SET, DUST BOLT BOLT, THROUGH SCREW M 4X 12,PAN HD SPRING WASHER 4 SPRING WASHER 4 (C=EXXX) (B) (C) (D) (E) I R (F) 1 1 1 1 1 4 2 1 1 1 2 4 1 1 1 1 1 1 1 1 1 2 2 2 2 2 R (D=EXXX) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 32.STARTING MOTOR COMPONENT PART(12V 1.8KW) (A)=2QM20 (B)=3QM30 (C)=2QM Fig.32.STARTING MOTOR COMPONENT PART(12V 1.8KW) REF. LEV. PARTS NO. DESCRIPTION (D)=3QM (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 1 2 2 7 12 13 2 2 3 14 15 16 2 3 3 17 18 19 3 2 4 20 21 22 2 3 3 23 24 25 2 2 2 26 27 28 2 3 2 29 31 37 2 2 2 38 39 40 2 2 2 41 42 2 2 121370-77010 X21207100 X21201115 X21143155 X21202220 X21142215 X21203305Y X21207311 X21205312 X21201313 X21202350 X21204302 X21209400 X21204401 X21201403 X21202404 X21201404 X21205550 X212086001 X21202601 X21204610 X21201815 X21206605 X21207810 X21203750 26557-040082 X21201836 X21201742 X21201744 STARTER (S12-47) ARMATURE ASSY WASHER SET, THRUST STOPPER SET, PINION COIL ASSY, FIELD SCREW HOLDER ASSY, BRUSH BRUSH (+) BRUSH (-) SPRING, BRUSH COVER ASSY, REAR METAL, COVER BEARING BEARING ASSY METAL, CENTER BERG. SEAL, OIL CENTER PIECE PACKING, CENTER PINION ASSY HOUSING ASSY, GEAR METAL, GEAR CASE COVER, DUST BOLT LEVER SET, SHIFT BOLT, THROUGH SWITCH, MAGNETIC SCREW M 4X 8 COVER, RUBBER COVER, RUBBER COVER, RUBBER (B) (C) (D) 1 1 1 1 1 1 1 1 1 1 1 4 1 1 4 1 1 4 1 2 2 1 2 2 1 2 2 4 1 1 4 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1 2 2 1 2 1 6 1 1 6 1 1 6 1 1 1 1 1 1 1 (E) I R (F) (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 33.CLUTCH KBW-10A(FOR 2QM20)(OPTIONAL) (A)=KH18-A (B)=KBW-10A (C)= Fig.33.CLUTCH KBW-10A(FOR 2QM20)(OPTIONAL) REF. LEV. PARTS NO. DESCRIPTION (D)= (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 1 1 1 4 5 6 1 1 1 7 8 9 1 1 1 10 11 12 1 1 1 13 14 15 1 1 2 16 17 18 2 2 2 19 20 21 2 2 2 22 23 24 2 2 2 25 26 27 2 2 2 28 29 30 2 2 2 31 32 33 2 1 1 34 35 36 1 1 1 37 38 39 1 1 1 40 41 42 1 1 1 43 44 45 1 1 1 46 46-1 1 1 177099-02110 177099-02120 177099-02130 26116-100302 22287-100000 177099-02081 177099-02091 26216-080222 26716-080002 22287-080000 22352-040012 177099-06050 177099-02250 177099-06010 177099-02450 23414-160021 177099-02421 102210-07990 177095-02400 177099-02950 177099-02960 177095-02980 23884-160002 23414-160000 177080-02720 177080-02730 26116-100302 22287-100000 177090-02620 177090-02630 177095-06070 177099-06041 177099-06050 177095-06030 177095-06050 177095-06140 177095-03200 177095-06060 177095-06040 26116-080252 177099-03500 177099-03011 177099-03411 177099-03920 177099-03301 177099-03311 177099-03980 (B) HOUSING, CLUTCH FLANGE, MOUNTING STRAIGHT PIN BOLT 10X30 WASHER 10 COVER, SIDE GASKET STUD M 8X 22 PLATED NUT M 8 LOCKING WASHER SPRING PIN 4X12 PLUG SHIM SET FORK ASSY, SHIFT DIPSTICK W/BREATHER GASKET 16 LABEL RIVET LABEL SEAL TC30 52 8, OIL SEAL TC40 52 8, OIL SEAL, OIL PLUG 16 GASKET 16, ROUND BRACKET (A) BRACKET (B) BOLT 10X30 WASHER 10 LABEL LABEL BEARING, SHIFT FORK SHAFT, SHIFT PLUG CAM, SHIFT PIN CIRCLIP SPRING SPRING LEVER BOLT M 8X 25 PLATED DISK, (NON-ASB.) SHAFT, INPUT (I=2) SHAFT, INPUT (I=3) ROLLER BEARING GEAR (Z=25), IDLE SHAFT, IDLE GEAR SHAFT 1 1 2 O-RING 1A S-15.0 WASHER, THRUST NEEDLE BEARING NEEDLE BEARING 1 1 2 SHAFT, OUTPUT 1 (C) (D) (E) I R S 1 (F) 9 9 1 1 6 6 6 1 1 2 1 1 1 4 4 1 1 1 1 1 1 1 1 4 6 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 (B=C/#2679) Remarks (1)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.49-1. 47 48 49 1 1 1 49-1 1 24341-000150 177099-03321 177099-03900 177099-03901 2 S (B=C/#2679) 50 1 177099-03021 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 33.CLUTCH KBW-10A(FOR 2QM20)(OPTIONAL) (A)=KH18-A (B)=KBW-10A (C)= Fig.33.CLUTCH KBW-10A(FOR 2QM20)(OPTIONAL) REF. LEV. PARTS NO. DESCRIPTION (D)= (E)= (F)= ------------------ Q'TY -----------------(A) Remarks (1)INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH REF.NO.49-1. 51 52 53 1 1 1 54 55 57 1 1 2 58 59 60 2 1 1 61 62 63 1 1 1 64 65 66 1 1 1 67 68 69 1 1 1 70 71 72 1 1 1 73 74 75 1 1 1 76 77 78 1 1 1 24321-000300 177099-03550 177099-03540 177099-03920 177099-03040 177095-03030 177095-03040 177090-03230 177095-03190 177095-03200 177099-03070 177099-03080 177090-03180 177095-03210 177099-03101 177099-03431 177099-03111 177090-03110 177095-03280 177090-03121 177090-03080 177090-03090 177099-03161 177090-03270 177095-03800 177095-03900 177099-03470 O-RING G30 COUPLING, OUTPUT LOCK NUT ROLLER BEARING PLATE ASSY, DRIVING PARALLEL PIN PARALLEL PIN KEY PIN SPRING RING, SHIFTING PLATE, PRESSURE BALL 8MM SPRING, RETURN GEAR (Z=47), FORWARD GEAR (Z=51), FORWARD GEAR (Z=45) RETAINER (B) CIRCLIP SPRING DISC, FRICTION PLATE, STEEL SPACER WASHER, THRUST SHIM SET ROLLER BEARING RACE INNER (B) (C) (D) (E) I R (F) 1 1 1 2 1 2 3 1 3 3 1 2 6 3 1 1 1 2 2 4 8 6 2 2 2 2 2 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 34.CLUTCH KH-18A(FOR 3QM30)(OPTIONAL) (A)=KH18-A (B)=KBW-10A (C)= Fig.34.CLUTCH KH-18A(FOR 3QM30)(OPTIONAL) REF. LEV. PARTS NO. DESCRIPTION (D)= (E)= (F)= ------------------ Q'TY -----------------(A) 1 2 3 1 1 1 4 5 6 1 1 1 7 8 9 1 1 1 10 11 12 1 1 1 13 14 15 1 1 1 16 17 18 1 1 1 19 20 21 1 1 2 22 23 24 2 2 2 25 26 27 2 2 2 28 29 30 2 2 2 31 32 33 2 2 2 34 35 36 2 2 2 37 38 39 2 1 1 40 41 42 1 1 1 43 44 45 1 1 1 46 47 48 1 1 1 49 51 52 1 2 2 53 54 55 1 1 1 177090-02700 177091-02710 177099-02130 22287-100000 26223-100252 26226-100252 26713-100002 26716-100002 22133-100000 177090-02800 26450-080222 177090-02070 177090-02120 26226-100252 26716-100002 22287-100000 177095-02250 177090-02250 177095-02310 177090-06010 177090-02451 23418-270035 177090-02421 102210-07990 177095-02400 177095-02960 177090-02970 177095-02980 23884-120002 23414-120000 177091-02720 177091-02730 26116-100282 22287-100000 177090-02620 177090-02630 177095-06070 177090-06300 177099-06050 177095-06030 177095-06050 177095-06140 177095-03200 177095-06060 177095-06040 26116-080252 177090-03500 177090-03750 177090-03020 177095-03030 177095-03040 177090-03230 177095-03190 177095-03200 HOUSING, CLUTCH FLANGE, MOUNTING STRAIGHT PIN WASHER 10 STUD M10X 25 STUD M10X 25 PLATED NUT, M10 (STENLES NUT 10 WASHER 10 SPACER, L.O. PUMP BOLT M 8X 22 COVER, UPPER PACKING, UPPER COVER STUD M10X 25 PLATED NUT 10 WASHER 10 SHIM SET SHIM SET SHIM FORK ASSY, SHIFT DIPSTICK GASKET 27, ROUND LABEL RIVET LABEL SEAL SB35 47 7, OIL SEAL TC54 70 9, OIL SEAL, OIL PLUG M12,HEX. GASKET 12, ROUND BRACKET (A) BRACKET (B) BOLT M10X 28 PLATED WASHER 10 LABEL LABEL BEARING, SHIFT FORK SHAFT, SHIFT PLUG CAM, SHIFT PIN CIRCLIP SPRING SPRING LEVER BOLT M 8X 25 PLATED DISC, DAMPER SHAFT, INPUT PLATE ASSY, DRIVING PARALLEL PIN PARALLEL PIN KEY PIN SPRING (B) (C) (D) (E) I R (F) 1 1 2 8 4 8 4 8 4 1 3 1 1 4 4 4 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 6 6 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 3 1 3 3 ++ CONTINUE ++ (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 34.CLUTCH KH-18A(FOR 3QM30)(OPTIONAL) (A)=KH18-A (B)=KBW-10A (C)= Fig.34.CLUTCH KH-18A(FOR 3QM30)(OPTIONAL) REF. LEV. PARTS NO. DESCRIPTION (D)= (E)= (F)= ------------------ Q'TY -----------------(A) 56 57 58 1 1 1 59 60 61 1 1 1 62 63 64 1 1 1 65 66 67 1 1 1 68 69 70 1 1 1 71 72 73 1 1 1 74 75 76 1 1 1 77 78 79 1 1 1 80 81 82 1 1 1 83 84 85 1 1 1 86 87 88 1 1 1 89 90 91 1 1 1 93 97 98 2 2 2 99 100 101 2 2 2 102 103 104 1 1 1 105 106 107 1 1 1 108 109 110 1 1 1 111 1 177090-03050 177090-03060 177090-03070 177090-03180 177090-03210 177090-03300 177090-03600 177090-03310 177090-03100 177090-03110 177095-03280 177090-03121 177090-03080 177090-03090 177090-03130 177090-03140 177090-03270 177090-03760 177095-03240 177095-03800 177095-03900 177095-03150 24141-302070 24141-302060 177090-03320 177090-03610 24141-302050 177090-03800 177090-03810 177090-03820 24341-000380 177090-03391 177090-03400 24141-302080 177090-03920 777095-04900 124060-32990 101304-32560 124060-32070 103338-32570 26116-060102 23414-080000 26450-080222 177090-07400 23851-100006 23414-160000 22451-100000 177090-07410 26116-100152 177090-04400 23414-200000 177095-04120 RING, SHIFTING PLATE (L), PRESSURE PLATE, PRESSURE BALL 8MM SPRING PINION (Z=24), FWD. PINION (Z=32), FWD. GEAR (Z=36) RETAINER (A) RETAINER (B) CIRCLIP SPRING DISC, FRICTION PLATE, STEEL SPACER (A) SPACER (B) WASHER, THRUST NUT SPACER SHIM SET ROLLER BEARING BUSH ROLLER BEARING ROLLER BEARING GEAR (Z=17/26), IDLE GEAR (Z=24/26), IDLE ROLLER BEARING SHAFT, OUTPUT GEAR (Z=72) I=3 GEAR (Z=65), OUTPUT O-RING 1A S-38.0 COUPLING, OUTPUT NUT ROLLER BEARING ROLLER BERG. #30308 PUMP ASSY, HYDRAULIC PLUG PIN, SHAFT COVER O-RING BOLT M 6X 10 PLATED GASKET 8, ROUND BOLT M 8X 22 PIPE, LUB OIL JOINT BOLT 10 GASKET 16, ROUND WIRE 1.0 RETAINER, PIPE BOLT M10X 15 PLATED STRAINER, LUB OIL GASKET 20, ROUND GASKET (B) (C) (D) (E) I R (F) 1 1 1 6 3 1 1 1 2 2 2 4 8 6 1 1 2 1 1 2 4 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 3 2 2 1 1 2 1 1 1 1 1 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD. Y00R0919 Y00R0919 35.SPECIAL TOOL(KBW-10A & KH18-A) (A)=KH18-A (B)=KBW-10A (C)= Fig.35.SPECIAL TOOL(KBW-10A & KH18-A) REF. Remarks THIS FIGURE ARE NOT ILLUSTRATED. LEV. 1 2 3 1 1 1 4 5 6 1 1 1 7 8 9 1 1 1 10 11 12 1 1 1 13 14 15 1 1 1 16 17 18 1 1 1 PARTS NO. 177090-09010 177095-09020 177095-09060 177099-09040 177095-09170 177095-09070 177095-09080 177095-09090 177090-09100 177099-09010 177095-09110 177099-09030 177090-09130 177090-09140 177099-09020 177090-09150 22312-100200 177090-09160 DESCRIPTION SPACER REPLACER HOLDER REPLACER REPLACER REPLACER WRENCH WRENCH WRENCH WRENCH REPLACER REPLACER SPACER WRENCH W/PIN WRENCH W/PIN PIN PARALLEL PIN 10X20 SPACER (D)= (E)= (F)= ------------------ Q'TY -----------------(A) (B) 1 1 1 1 1 1 1 1 1 (C) (D) (E) I R (F) 1 1 1 1 1 1 1 1 1 1 2 1 2 1 (C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD.
Similar documents
y00r2020:1.cylinder block
(C)Copy Rights YANMAR CO.,LTD and YANMAR AGRICULTURAL EQUIPMENT CO.,LTD.
More informationYanmar engines - LSM Diesel Denmark
GASKET 8, ROUND GASKET 12, ROUND JOINT BOLT 6 PUMP ASSY, FUEL FEED GASKET STUD M 6X 16 PLATED SPRING WASHER 6 NUT 6
More informationy00f5041:1.cylinder block
STUD, CYL. HEAD NUT 10 WASHER PARALLEL PIN 8X 16 PLUG 20 SPRING PIN 4X 8 COCK 1/4 MAIN METAL PACKING FLANGE, ZINC PACKING BOLT M 6X 12 PLATED ZINC, ANTI-CORROSIVE LOCK NUT M 8 PLATED 3-WAY JOINT PI...
More informationQuick Reference for
4JH-E, TE, HTE, DTE, 4JH2-E, TE, HTE, DTE, UTE, 4JH3-E, TE, THE, DTE, 4JH4E, D36X, D27AX, AY, D36AX, AY
More information