Price Book - Precision Instrument Correction

Transcription

Precision Instrument Correction Inc.
933 Mariner St.
Brea, CA 92821
www.picinc.net
Phone: 714-671-6018 • Fax: 714-672-0685
Toll Free: 888-6PICINC
(674-2462)
www.picinc.net
Calibration & Repair Price List
Effective August 1, 2015 (Rev. 1)
ISO/IEC 17025: 2005
ACCREDITED
Direct Traceability to N.I.S.T.
& On Site Capabilities
FREE pick-up & delivery service in
ALL of Orange, Los Angeles,
San Diego Counties and
portions of San Bernardino,
Ventura and Riverside Counties.
NOTES:
•
• There is a $40.00 minimum on all orders done in our lab
•
• All on-site calibration orders are subject to a
$500.00 minimum charge
•
• All on-site orders are subject to a travel/set-up charge
•
• All prices are subject to change upon receipt of items
•
• ISO/IEC 17025:2005 Accredited Calibration available on select
items upon request, extra charges may be applicable
•
• A $10.00 evaluation fee on repairs is waived upon approval of quote
•
• Repair Prices start on page 12
•
Precision Instrument Correction Inc. – Calibration and Repair Price List – Effective August 1, 2015 (Rev. 1)
ITEM DESCRIPTION
SIZE OR RANGE
PRICE ($)
1-2-3 Blocks
Altimeters
Amplifier, Gage / Mu Checker
Anemometer
Angle Blocks
Angle Gage – Blade / Leaf Type
1” x 2” x 3”
Some Models
Electronic, Analog
Most Models
0 to 90°
Per Size
Set Minimum
Angle Plate, Knee
To 12”
To 24”
Bath, Temperature
All
Beakers
Up to 50 mL
Up to 100 mL
Up to 500 mL
Up to 2000 mL
Up to 5000 mL
Bench Center
To 12”
Bench Micrometer (Supermicrometer)
To 10”
Bore Gage
(Electronic Readout add 50%) Dial – Per Head / Extension
Box Parallel
To 6”
To 12”
Calibration Tester / Indicator Calibrator
.050” / .200” – Mitutoyo
Calipers
Dial / Vernier To 6”
To 8”
• Electronic Readout add 50% to
To 12”
similar size of dial caliper.
To 24”
• Add 20% to equivalent English size for
To 36”
Metric sizes; or with Digital Readouts
To 48”
To 72”
To 144”
Calipers - Center to Center
Caliper Calibration Block / Caliper Checker
Kalmaster (I.D. & O.D.)
Chamfer Gage
Chart Recorder
Check Master
Combination Square Set (4 Pieces)
Comparator, Optical (No Data Points Provided)
Video
Concentricity Gages
Conductivity Meter / Tester – Metal
Fluid (Most Models)
Countersink Gage
6 to 12”
To 12”
To 24”
To 6”
90°, 127°
Temperature / Humidity
To 12”
To 24”
To 36”
up to 24”
To 10” Screen
To 14”
To 20”
To 30”
To 40”
– Additional Data Points –
Most Models
Most Models
To 100%IACS, 1 Probe
– Per additional probes –
Standards (most types)
TDS Only
TDS and PH
Dial
Electronic
1
22.00 per block
125.00 & up
90.00
Quoted
18.00 per block
4.00
30.00
45.00
58.00
75.00
40.00
60.00
80.00
100.00
125.00
70.00
90.00
30.00
29.00
38.00
90.00
18.00
20.00
24.00
32.00
47.00
55.00
90.00
150.00
35.00
70.00
120.00
80.00
32.00
95.00
80.00
130.00
160.00
123.00
90.00
115.00
140.00
150.00
160.00
30.00
145.00
30.00
80.00
35.00 ea.
30.00 ea.
80.00
150.00
32.00
38.00
Crankshaft Distortion Gage
Current – Calibrator (No Data Points Provided)
Any Range
To 30 Amps
30.00
75.00
25.00 & up
Shunt
Data Acquisition – Unit
(No Data Points Provided)
To 30 Amps
Most Models
55.00
125.00 & up
25.00 & up
Modules/Multiplexer Card
(Data Points Provided)
Data Logger
(Portable Recorder Type)
Dead Weight Tester
Decade Box
Depth Gage – Indicator Type
Caliper Type
Electronic Readout add 50% to
similar size of depth gauge
Depth Mike Checker
Dew Point Monitors
Digibridge
•
Durometer
• Electronic Readout add 50%
Dynamometer
Flow Meter (Gas Only) - Rotameter
Force Gage / Push-Pull Gage / Fish-Scale –
Tension OR Compression Only
• If both directions required, double cost of
maximum range listed
Gage Blocks – up to 4”
•
30.00 minimum charge on any Set
Gage Blocks – Long Blocks 5 to 20”
•
Metric Blocks add 20% to equivalent
English size.
Gage Setting Fixture, Sunnen
Gage Stand – Granite or Steel
Gage Tree
Gauss Meter / Magnetic Field Indicator
Groove Gage
Up to 10 Channels
Up to 20 Channels
Up to 40 Channels
Temp OR Humidity Only – Up to 3 Points
Temp & Humidity – Up to 2 Points per Range
Multi-Channel / Thermocouple Type
To 10,000 PSI
– Additional Pistons –
To 100 M (to 1%)
To 1”
– Per Additional Rod –
150.00
250.00
400.00
65.00
75.00
25.00 & up
Quoted
250.00
150.00 ea.
38.00 per Decade
20.00
5.00
To 6”
To 8”
To 12”
To 24”
All
Most Models
General Radio Models 1657, 1658, 1659
Other Models / Types
Type A, D
Type O, OO, OOO-S
Type M
Hand Held to 5 lbs
Up to 1000 lbs (most models)
Over 1000 lbs (most models)
Up to 20 LPM (40 SCFH)
20 to 500 LPM (40-1000 SCFH / 1-15 SCFM)
Other Types
To 30 lbs
To 50 lbs
To 100 lbs
To 500 lbs
To 1000 lbs
To 2000 lbs
To 10000 lbs – Compression Only
.050” to 4” sets – per block
1 to 100mm sets – per block
Accessories sets– per piece
Individual blocks up to 4” / 100mm
Individual 5” to 8”
10”
12”
16”
20”
0.1” to 6”
Up to 6” x 8”
To 6”
To 12”
To 10 Gauss
Most Models
18.00
20.00
24.00
32.00
70.00
Quoted
85.00
Quoted
35.00
40.00
60.00
50.00
150.00
Quoted
100.00
125.00
Quoted
45.00
55.00
75.00
95.00
120.00
200.00
200.00
2.00
2.35
2.25
8.00 ea.
20.00
26.00
32.00
35.00
40.00
70.00
50.00
75.00
110.00
125.00
25.00
2
Hardness Tester
Height Gage
•
•
Electronic Readouts add 50% to similar
size of Vernier.
Metric sizes add 20% to equivalent
English size
Motorized Height Gage
(Trimos Style)
Height Master – Cadillac Gage
Hi-Voltage Probe
Hole Gage – Kwik Chek
Humidity Gage – Data Logger Type, Dial, Digital
(Hygrometer)
Chart Type
Hybrid Recorders
Hygrothermograph (Chart Type)
Inclinometer – Digital Protractor
Indicator –
Button
• Metric sizes
add 20% to
equivalent
English size
115.00
40.00
Portable – Hand Held Up to 2 Scales
– Additional Penetrators/Scales –
90.00
25.00
Portable – Hand Held, Webster Type
55.00
Standard Brinell Type
w/ Magnification/Loupe Scale add
Vernier, Dial, Digital to 12”
24”
36”
48”
60”
72”
145.00
65.00
30.00
38.00
48.00
65.00
80.00
110.00
Electronic to 24”
36”
over 36”
Height Standard/Master Setting Gage
To 12”
To 18”
To 24”
To 36”
Most Models
All
Standards
Humidity Only – Up to 3 Points
Most Models
Various
Temperature & Humidity
Hand Held 0.1 to 360°
All
125.00
200.00
250.00
40.00
95.00
130.00
175.00
250.00
50.00
25.00
20.00
65.00
75.00
25.00 & up
95.00
200.00 & up
95.00
60.00
20.00
Co-Ax
All
25.00
Drop / Dial
To 2” travel
To 5” travel
20.00
28.00
Electronic
To 2” travel
To 4” travel
35.00
45.00
Mahr Type Indicator
.00005”/ .00002” increments
25.00
Test / Finger Type
Indicator Calibrator / Calibration Tester
Insulation / Dielectric Tester
Intertest / I.D. Dial Caliper Gage
Laser Micrometer
Level – Precision
Light Meters
Load Cell – Tension OR Compression Only
•
Standard & Superficial Up to 2 Scales
– Additional Penetrators/Scales –
If both directions required, double cost of
maximum range listed
Loop Calibrator (No Data Points Provided)
All Models
To 2”
All
Dial to 2”
4”
6”
To 2” Range
Bubble to 18”
Digital
Most Models
To 1000 lbs
To 2000 lbs
To 10000 lbs – Compression Only
Current, Voltage
– Additional data points –
3
20.00
90.00
90.00
25.00
35.00
45.00
175.00
40.00
60.00
Quoted
120.00
200.00
200.00
85.00
25.00 & up
Magnification Scale / Loupe Scale
Magnehelic Gages
Manometer
Meters, Electrical – DMM
To 12”
Pressure inH2O
Digital / Liquid Filled
Hand Held DMMs, Analog, 3 to 4 ½ digits
Bench Types DMMs to 4 ½ digits
Bench Types DMMs to 8 digits
Any meter above
Per Meter
Calibrator
Process Meter
Scope Meter
65.00
65.00
65.00
50.00
55.00
75.00
125.00
200.00
300.00
25.00 & up
70.00 min.
150.00 & up
150.00 & up
200.00 & up
Amp, Current AC / DC to 30 Amps
Capacitance Meters
Capacitance Standard (1pF to 20mF)
Clamp Meter to 1000A
Continuity Meter / Tester
Electro Static Discharge (ESD)
Frequency Meter
Ground Bond Tester
Hipot(Hypot) Tester
Inductance Meter / Tester
Insulation / Dielectric Tester
LCR Meter – Hand Held
Bench Type
Loop / Current, Voltage Calibrator
Megohmmeters to 1 TΩ
Micro Ohmmeter / Microammeter
Milliohmmeters / Milliammeters
Modulation Meters
Network Analyzers
Ohmmeters 1Ω to 10MΩ
Oscillator
Panel Meters
Power Analyzer / Meter – Single Phase
Power Supply – To 500V / 10A
Resistance / Resistivity Meter
Volt AC / DC to 1000 Volts
Watt Meter – Most Models
Wave Meter – Some Models
50.00
65.00
45.00
55.00
65.00
60.00 & up
75.00
88.00
80.00
65.00 & up
90.00
85.00 & up
95.00 & up
85.00
82.00
82.00
60.00
Quoted
Quoted
50.00
175.00 & up
60.00
95.00 & up
60.00
75.00
50.00
67.00
80.00
Additional data/points
On-site Service Minimum
Any meter above
Per Meter
25.00 & up
70.00 min
Coaxial / Microwave / Radio Frequency (RF)
Attenuators (with data)
Function Generators
Oscilloscopes – up to 1 GHz, up to 2 Channels
High Frequency, up to 2 Ch
– Per Additional Channel –
Power Sensors (with data)
Signal Generators
Spectrum Analyzers – Hand Held
Bench Type
Universal/Frequency Counter – Up to 2 Ch
– Per Additional Channel –
150.00
175.00 & up
200.00 & up
300.00 & up
50.00
250.00
Quoted
200.00 & up
300.00 & up
125.00 & up
50.00
Any unit above
50.00 & up
Meters, Electrical – Multifunction
Miscellaneous
4
Micrometer Head (Electronic Readout add 50%)
Micrometers – O.D.
•
•
For all types of micrometers:
Add 50% to the similar size for
Electronic Readouts.
Add 20% to equivalent English size for
Metric sizes; or with Digital Counter
0.000005” Resolution
Ball Micrometer
Blade Micrometer
Center Micrometer
Depth Micrometer
Disc / Flange Micrometer
Groove Micrometer
I.D. Micrometer
Indicating Micrometer
(Hand Held Supermicrometer)
Inside Micrometer
Intramic
•
Intramics with interchangeable
heads/anvils are charged for each
additional head/anvil set
Multi Micrometer / Mul-T Mike
Multi-Anvil Micrometer
0 to 2”
1 to 3”
4 to 6”
7 to 12”
13 to 24”
25 to 36”
37 to 48”
49 to 60”
65.00
18.00
20.00
24.00
32.00
40.00
50.00
65.00
Up to 3”
1 to 3”
4 to 6”
1 to 3”
4 to 6”
7 to 10”
11 to 13”
14 to 16”
16 to 20”
To 4”
0 to 1”
– Per additional rod –
0 to 1”
1 to 2”
2 to 3”
3 to 4”
0 to 2”
0 to 3”
0 to 1”
1 to 2”
2 to 3”
3 to 4”
1 ½ to 8”
1 ½ to 12”
4 to 24”
8 to 36”
4 to 40”
4 to 52”
6 to 60”
40 to 120”
40 to 160”
40 to 200”
To 2”
To 4”
To 6”
Over 6”
0 to 1”
1 to 2”
0 to 3”
0 to 4”
2 to 6”
6 to 9”
9 to 12”
6 to 12”
12 to 18”
16 to 20”
18 to 24”
24 to 30”
30 to 36”
36 to 42”
42 to 48”
48 to 54”
45.00
18.00
22.00
18.00
24.00
32.00
43.00
55.00
65.00
20.00
20.00
7.00
18.00
22.00
28.00
35.00
18.00
18.00
22.00
27.00
30.00
35.00
50.00
60.00
57.00
60.00
70.00
80.00
100.00
150.00
195.00
240.00
27.00
35.00
50.00
65.00
25.00
27.50
35.00
40.00
45.00
48.00
50.00
52.00
58.00
62.00
67.00
80.00
90.00
110.00
125.00
140.00
5
Pitch / Thread Micrometer
Point Micrometer
Spline Micrometer
Tri-Flute / V Micrometer
Tube Micrometer
Unimike / Wallmike
Micrometer End Standards
•
•
Metric Standards add 20% to equivalent
English size.
Extension Rods double cost of maximum
size listed
Micrometer Pitch Standards
•
Length Calibration Only
Microscope
Mike Master
Oditest / Scissor Gage / Dial Caliper Gage
Optical Parallel / Flat
Oscilloscope (No Data Provided)
Oven / Freezer / Cooler / Incubators
8 to 10pt Uniformity Calibration
AMS 2750 Survey Calibration
Parallels – Steel, Granite, Adjustable
Permascope
Permeability Indicator
PH Meters – Most Models
0 to 1”
1 to 2”
2 to 3”
3 to 4”
4 to 5”
5 to 6”
6 to 7”
7 to 8”
8 to 9”
9 to 10”
10 to11”
11 to 12”
Multi Anvil Sets – Per Additional Pitch
To 3”
To 2”
0 to 2”
2 to 3”
3 to 4”
To 3”
To 3”
1 to 5”
6 to 10”
11 to 20”
21 to 30”
31 to 40”
41 to 50”
51 to 60”
61 to 70”
71 to 80”
1 to 3”
4 to 6”
7 to 10”
11 to 15”
Toolmakers
To 6”
To 12”
0 to 2”
2 to 4”
4 to 12”
To 2” Diameter, per surface
To 4” “
“
To 6” “
“
Up to 1 GHz, up to 2 Channels
High Frequency, up to 2 Channels
– Per additional channel –
– Additional data points, per channel –
Small Portable Type (1 temp.)
Intermediate (1 temp.)
Large – Walk in (1 temp.)
– Per Additional Temperature Setting –
20.00
23.00
28.00
35.00
45.00
55.00
65.00
75.00
85.00
95.00
105.00
115.00
8.00
18.00
18.00
20.00
24.00
27.00
18.00
18.00
10.00
11.00
13.00
19.00
23.00
30.00
33.00
36.00
42.00
20.00
27.00
34.00
40.00
125.00
50.00
80.00
25.00
35.00
50.00
22.00
34.00
55.00
200.00 & up
300.00 & up
50.00 & up
50.00 & up
150.00
190.00
225.00
75.00
Any Size (1 temp.)
– Per Additional Temperature Setting –
To 6”
To 18”
Fischer
w/ 4 Inserts
– Per Additional Inserts –
PH Only
PH and Conductivity
Quoted
Quoted
20.00 ea.
35.00 ea.
75.00
225.00
25.00
80.00
150.00
6
Pi Tape
•
•
2 to 12”
12 to 24”
24 to 36”
36 to 48”
48 to 72” (12” Range Increments)
72 thru 144” (12” Range Increments)
Deltronic to 1”
Minus / Plus to 1”
42.00
54.00
60.00
64.00
72.00
94.00
110.00
150.00
8.00
8.00
Deltronic to .5000”
Deltronic over .5000”
Minus / Plus .011 to .060”
.061 to .250”
.251 to .500”
.501 & larger sets
Single Points
Adjustable
Up to 20 lbs
Up to 80 lbs
Go / NoGo to 1” – Per Size/Member
2”
“
3”
“
4”
“
8”
“
Up To 1” – Per Member
Over 1”
“
Threaded to 1 1/2” – Per Member
Threaded 2” to 4” – Per Member
Plain 6-Step - Per Member
0 to .999” – Per Member
1 to 1.999”
“
2 to 2.999”
“
3 to 3.999”
“
4 to 8”
“
65.00
95.00
60.00
95.00
120.00
100.00
55.00
95.00
60.00
75.00
8.00
12.00
16.00
20.00
27.00
13.00
20.00
30.00
40.00
42.00
11.00
16.00
24.00
35.00
44.00
Set Plug – English
Class W or X
0 to .999” – Per Member
1 to 1.999”
“
2 to 2.999”
“
3 to 3.999”
“
4 to 8”
“
17.00
24.00
30.00
40.00
60.00
Thread Plug – Metric
0 to 25mm – Per Member
26 to 50mm
“
51 to 75mm
“
76 to 100mm “
101 to 200mm “
15.00
19.00
24.00
35.00
40.00
Set Plug – Metric
0 to 25mm – Per Member
26 to 50mm
“
51 to 75mm
“
76 to 100mm “
101 to 200mm “
22.00
26.00
30.00
40.00
50.00
ACME, Buttress, Multi-Lead
0 to 2”
2 to 4”
4 to 6”
6 to 8”
8 to 10”
35.00
41.00
50.00
75.00
100.00
Tapes with 24” ranges add 50% to
maximum size listed.
If data required over 12”, add 50%
Pin Gage, Cylindrical – Individual
Sets
•
If data required for Minus / Plus sets,
double cost of maximum size listed
Pipette
Pin Retention Gage
Plug Gage – Cylindrical
Plug Gage – Hex Plug
Plug Gage – Taper
(NPT, ANPT, NPTF)
Plug Gage – Thread – English – Class X
(UNC, UNF, UNEF, UNS, UN, NPSM
STI, Left-hand, B/P, A/P)
– Per Member
“
7
Power – Analyzer / Meter (No Data Points Provided) Limited Models / Single Phase
– Per additional phase –
To 500V / 10A
Supply
Precision Ball Bearing
Precision Hole Gage, Sunnen
Pressure Gauge – Standard (2% or larger Accuracy)
• Test Gauges (1%, 0.5% and 0.25%
Accuracy) add 20% to similar size of
standard gauge, up to 5 points
• Precision Gauges (0.1%, 0.05%, 0.025%
Accuracy) add 50% to similar size of
standard gauge, up to 10 points
Adjustment/Repair
Per meter above
Per Piece
Minimum Set Charge
Up to 2”
0 to 1000 PSI-hydraulic or Air
1001 to 10,000
10,001 to 30,000 PSI-hydraulic only
Air over 10,000 PSI
Pressure & Vacuum Scale
Vacuum Only
Per Gauge
Per Gauge
Magnehelic / Manometer Gauges
Pressure inH2O / Digital, Liquid Filled
Pressure Controller / Indicator / Tester
To 10,000 PSI
Pressure Module / Transducer / Transmitter
To 10,000 PSI
To 20,000 PSI
To 30,000 PSI
To 1”
To 2”
To 3”
1 Stylus
– Per additional stylus –
Probe - Air
Profilometer – Surface Roughness Tester
Roughness Standard
Protractor (Electronic Readout add 50%)
Pyrometer
Radius Gage – Blade / Leaf Type
Recorder – X-Y Chart, Temp. Plotter
Rectifiers
Regulators
Resistance Standards
Retention Tester – Most Models
Ring Gage – Plain Cylindrical, Chamfer and
Countersink
Ring Gage – Taper (NPT, NPTF, ANPT)
Ring Gage – Thread – English – Standard
(UNC, UNF, UNEF)
Left Hand, B/P, A/P
Reference Standard – 1, 2, or 3 Patch/Size
– Per additional patch/size –
Vernier, Dial
All
Per Size
Set Minimum
All
Per Meter
Most Models
To 100 M (to 1%)
Up to 20 lbs
Up to 80 lbs
0.125” to 0.999”
1.000 to 2.999”
3.000 to 4.999”
5.000 to 6.999”
7.000 to 9.999”
10.000 to 15.000”
Threaded to 1.999”
Threaded to 3.999”
Threaded over 4”
Plain 6-Step to 2”
.060” to .999” – Per Member
1” to 1.999”
“
2” to 2.999”
“
3” to 3.999”
“
4” to 4.999”
“
1” to 1.999”
“
2” to 2.999”
“
3” to 3.999”
“
8
95.00
55.00
60.00
25.00 & up
4.00
30.00
70.00
45.00
60.00
85.00
Quoted
65.00
55.00
30.00 & up
60.00 min.
20.00 min.
65.00
150.00 & up
75.00
105.00
135.00
10.00
15.00
20.00
100.00
35.00
35.00
5.00
40.00
Quoted
4.00
30.00
95.00 & up
70.00
55.00
40.00
60.00
75.00
20.00
25.00
32.00
36.00
55.00
75.00
25.00
40.00
Quoted
40.00
19.00
27.00
42.00
65.00
80.00
32.00
40.00
48.00
60.00
Metric – Standard – Class 6g
to 25mm
to 50mm
to 75mm
to 100mm
to 150mm
– Per Member
“
“
“
“
35.00
45.00
55.00
65.00
80.00
Special – NC, UN, UNS, NPSM
1” to 1.999”
“
2” to 2.999”
“
3” to 3.999”
“
4” to 8”
“
35.00
45.00
60.00
70.00
80.00
ACME, Multi-Lead
.060” to 1.999” – Per Member
2” to 4”
“
To 6”
To 12”
To 24”
To 12”
To 24”
To 36”
To 48”
To 72”
To 144”
Most Models
Analytical 0.1 / 0.01 mg.
Triple Beam, Electronic Scale to 100 lbs.
To 250 lbs.
To 500 lbs.
To 1000 lbs.
To 2000 lbs. *Limited Capabilities
Height Standard, Master Setting Gage
Most Types
5” Simple
5” Compound
10” Simple
10” Compound
Most Models
40.00
52.00
35.00
45.00
65.00
22.00
27.00
38.00
47.00
70.00
135.00
75.00
85.00
75.00
100.00
125.00
200.00
400.00
40.00 & up
75.00
38.00
52.00
55.00
68.00
30.00
0 to 1”
1 to 2”
2 to 3”
3 to 4”
All
Meter
Calibrator
Most Models
Hand Held
Bench Type
To 500 lbs
To 1000 lbs
To 2000 lbs
22.00
27.00
30.00
35.00
30.00
180.00
240.00
60.00
200.00 & up
300.00 & up
100.00 & up
110.00
135.00
200.00
Riser Block
Rule – Steel & Wyteface
Safety Analyzer
Scale – Weight
• Scales with Count Feature add
$25.00 to maximum size listed
Setting Standards
Sieves-Test / Wire Cloths
Sine Plate / Bar
Snap – Gage
Meter, Dial
Sphere – Probe (CMM)
Sound Level
Soldering – Station
Spectrum Analyzers (No Data Provided)
Spring Tester – Tension OR Compression Only
• If both directions required, double cost
of maximum range listed
With Length Gage add
Square – Cylindrical
Steel / Granite
To 6”
To 8”
To 12”
To 24”
To 6”
To 12”
To 24”
To 36”
18.00
20.00
24.00
32.00
33.00
43.00
60.00
90.00
To 12”
To 24”
To 36”
33.00
48.00
65.00
9
Stage Micrometer
Stopwatch – Hand Held
Straight Edge
Stroboscope
Supermicrometer
Surface Plate / Granite Table – Calibration
To 4”
To 10 Hrs
To 24 Hrs
To 24”
To 48”
To 72”
Most Models
10” Mechanical – Vernier Scale
10” Electronic / Analog Scale
Bench Supermicrometer
Charge Per Square Foot
Minimum Charge – Per Unit
On-Site Service Minimum Charge – Per Unit
Resurfacing – in addition to
calibration cost above
Minimum Charge Per Unit
Charge Per Square Foot:
Lab Grade AA
Inspection Grade A
Tool Room Grade B
Tachometer, Hand Held – Digital / Analog / Gun Photo, Non-Contact
(RPM Meter)
Contact
Tape Measure
To 25 ft.
To 50 ft.
To 100 ft.
Taper Gage
All Sizes
Leaf Type
Per Leaf
Telescoping Gage
Per Gage to 8”
Temperature Controller
All
Temperature Gage – Data Logger Type, Dial, Digital Temp Only – Up to 3 Points
(Thermo-Hygrometer)
Chart Type
Multi Channel / Thermocouple Type
Tensile Testers – Tension / Compression
Compression Only
Thermocouple – Calibrator
Module
Wire, Probe
Thermometer – Calibrator
Thermometer – Digital
Most Models
Any Model
To 1000 lbs
To 2000 lbs
To 10000 lbs
Up to 2 Thermocouple Types, per input
– Additional Thermocouple Type –
Any Type
Any Type
Most Models Up to 2 Thermocouple Types
Up to 2 Thermocouple Types, per input
47.50
45.00
50.00
40.00
55.00
95.00
170.00
110.00
135.00
90.00
4.00
50.00
75.00 min
60.00
18.00
14.00
12.50
80.00
180.00
38.00
60.00
100.00
30.00
10.00
12.00
45.00
65.00
75.00
25.00
95.00
Quoted
120.00
200.00
200.00
97.00
10.00 ea.
25.00 & up
75.00
50.00
97.00
10.00 ea.
25.00 & up
50.00
10.00 ea.
25.00 & up
Multi Channel / Thermocouple Type
Any Model
Quoted
Bi-Metallic, Surface, Glass
To 300°F
Over 300°F
60.00
70.00
Infrared/Laser, Heat Gun
Up To 900°F
– Additional Thermocouple Input –
80.00
50.00
10
Thickness Gage – Coating/Paint/Wall
(Titrimeter / Isoscope)
Dial
Electronic / Ultrasonic, 1 Probe
– Per additional probe –
60.00
75.00
30.00
Indicator Type – Dial
Electronic
To 2”
To 2”
25.00
35.00
Leaf Type
Per Size
Set Minimum
4.00
30.00
Standards – Film / Shims
Per Film / Size
15.00 ea.
Taper Gage
All Sizes
Leaf Type – Per Leaf
To 10Hrs
To 24 Hrs
Over 24 Hrs
To 36 inlbs
Over 36 inlbs
– Adjustment/Repair –
To 600 ftlbs
To 1000 ftlbs
30.00
10.00
45.00
50.00
60.00
30.00
35.00
20.00 min.
150.00
200.00
To 600 ftlbs
To 1000 ftlbs
Dial
To 200 ftlbs (2400 in.lbs.)
To 400 ftlbs
To 600 ftlbs
To 1000 ftlbs
– Adjustment/Repair –
Per Indicator
Thread Rolls – Per Set
To 6” Per Block
To 12” Per Block
To 30 in.Hg.
Pressure & Vacuum Scale
125.00
175.00
30.00
35.00
55.00
70.00
110.00
30.00 min.
47.00
16.00
20.00
33.00
55.00
65.00 & up
Per Gauge
Per Gauge
Most Models
To 10 lbs Per Piece
To 50 lbs Per Piece
Per Meter
1/8 to 1” Set
0.020” to 0.250” Set
Other Sets / per Size
English, Gear, Whitworth, ACME – Per Pitch
Metric – Per Pitch
Per Measurement / Size
Hand Held
Most Models (ESD)
60.00 min.
20.00 min.
Quoted
11.00
22.00
50.00
56.00
65.00
4.00
11.00
12.00
4.00
38.00
60.00
85.00
Timer
Torque Driver
Torque– Analyzer, Tester, Transducer,
Multiplier
– Additional Transducers –
Torque Watch
Torque Wrench / Meter
•
Electronic Scale add 20%
Tri Roll Systems
V-Blocks
Vacuum Gauge
• Test Gauges add 20% to similar size
Adjustment/Repair
Viscosity Cups, Meter
Weights
Welders / Welding Machines
Weld Fillet Gages
Wires – Thread Measuring
Wire/Wheel Gage
Wire Crimpers / Strippers
Wrist Strap – Tester
Calibrator
11
Repair Price List
The following prices are estimates for labor only. Parts are extra.
An Evaluation fee of $10.00 per item is waived if repair is approved.
Exact quotes can be given upon receipt and evaluation of items if requested
•
•
•
INSTRUMENT
Bore Gages
Calipers
•
Calipers with Double O.D.
Jaws add $25.00 to similar size
of dial caliper.
Chamfer / Countersink Gages
Depth Gage
Durometer
Height Gage
SIZE OR TYPE
REPAIR COST ($)
Removable Indicator
Fixed Indicator
Dial to 6”
8”
12”
24”
75.00
110.00
40.00
45.00
55.00
100.00
Electronic to 6”
8”
12”
24”
40”
Over 40”
45.00
55.00
75.00
125.00
200.00
Quoted
Vernier to 12”
24”
36”
48”
Over 48”
Dial to 1”
2”
Over 2”
Indicator Type
Caliper Type to 6”
8”
12”
24”
Dial
Dial or Digital to 12”
18”
24”
40”
40.00
100.00
120.00
155.00-185.00
Quoted
55.00
65.00
75.00
40.00
40.00
45.00
55.00
100.00
75.00-100.00
120.00
150.00
190.00
250.00
Electronic to 12”
18”
24”
40”
130.00
170.00
225.00
350.00
Motorized Height Gage to 12”
(Trimos Style)
Height Master
Indicator
Most Models
Button
Co-Ax – All Sizes
Drop / Dial
.0001” Res.
to 1” Travel
2” “
3” “
4” “
5” “
6” “
Electronic to 1”
2”
4”
Mahr All Sizes
Test to .030” Travel
.008” Travel
Over .060” Travel
Interapid
Model 312B-15
Model 312B-3
12
14”
24”
32”
40”
300.00
350.00
400.00
450.00
500.00
Quoted
35.00
70.00
50.00
40.00
50.00
60.00
75.00
90.00
110.00
50.00
60.00
75.00
80.00
40.00
50.00
Quoted
60.00
70.00
65.00
Intramic
Level
Micrometers - O.D. / Vernier
•
Deep Throat / Point / Spline
Micrometers add $5.00 to similar
size of Vernier Mic
Micrometers - Blade
Micrometers - Depth
Micrometers - Disc
Micrometers – Electronic
• Deep Throat / Point / Spline Mics
add $5.00 to similar size
Micrometers - Groove
Micrometers - Head - Electronic
Micrometers - Indicating
Micrometers - Inside
Micrometers - Multi-Anvil
Oditest / Intertest
Scissor Gage
Pressure Gauges
Profilometers
Protractors
Snap Gage / Meter - Dial
Thickness Gage - Dial
Thickness Gage - Electronic
Torque Drivers
Torque Wrenches
Up to 1”
2”
Over 2”
Up to 6”
8”
12”
18”
0” to 1”
1” to 2”
2” to 3”
3” to 4”
4” to 5”
5” to 6”
6” to 7”
7” to 8”
8” to 9”
9” to 10”
10” to 11”
11” to 12”
Each Additional 1”
0” to 1”
1” to 2”
2” to 3”
3” to 6”
7” to 10”
11” to 13”
14” to 16”
17” to 20”
0” to 1”
Per additional 1” rod
0” to 1”
1” to 2”
2” to 3”
0” to 1”
1” to 2”
2” to 3”
0” to 1”
1” to 2”
0” to 2”
0” to 1”
1” to 2”
All Sizes
2” to 6”
0” to 6”
6” to 12”
12” to 18”
18” to 24”
24” to 30”
30” to 36”
36” to 42”
42” to 48”
48” to 54”
To 2”
Over 2”
All
to 10,000 PSI
Hand held (Limited Capabilities)
All Sizes
0-1”
1-2”
0-1”
0-1”
to 36” inlbs
to 1000 ftlbs
13
90.00
110.00
140.00
40.00
50.00
60.00
75.00
37.50
40.00
42.50
45.00
50.00
60.00
70.00
75.00
80.00
85.00
95.00
105.00
10.00
50.00
60.00
75.00
100.00
130.00
170.00
210.00
250.00
35.00
7.00
60.00
70.00
80.00
45.00
50.00
55.00
50.00
60.00
85.00
135.00
160.00
Quoted
70.00
75.00
85.00
100.00
120.00
135.00
150.00
175.00
220.00
275.00
120.00
130.00
125.00
20.00 to 80.00
Quoted
70.00
170.00
Quoted
45.00
55.00
20.00 to 40.00
30.00 to 90.00
NOTES:

Price Book - Precision Instrument Correction

Transcription

Similar documents

CO-101-7 Mueller Capabilities.qxp_Layout 1

External Measurement

order line (714) 899-2773 (800) 660-3247 fax line

Asheville - ncdenr.org