813-9070 www.stairsolution.com

Indital USA offers an expanded selection of complimenting
parts for bar, glass, and cable systems from its stainless railing
line Arteferro INOX. Choose from an increased assortment
unique designs such as the international acclaimed cubed line.
and ease of installation vs. comparable welded systems. An
architectural focal point begins with best-in-class selection for
aesthetic, clean lines setting up a purely contemporary project.
programming in Houston that drops into systems that meet light
with your Indital USA sales representative.
A pre-galvanized system similar to INOX stainless was developed and
projects that yearned for the same look as INOX yet wanted a simple,
including stainless coatings! Early adopters are enjoying an off-the-shelf
parts system only sourced through Indital USA. All that is needed after
tapping and drilling holes is the ability to re-galvanize the areas using
easy to source sprays to eliminate the potential for corrosion prior
to priming and painting. This is a great alternative for decking, cable
projects on top of standard contemporary applications often seen in
modern lofts for stair railings. Many of the same principles apply to
choosing parts for the system, handing, and the tools necessary to
complete the job as INOX.
1883 McFarland Parkway
Alpharetta, GA 30005
(770) 813-9070
www.stairsolution.com
•
•
•
•
•
•
Tube & Anchorages .................................
Handrail Support......................................
Curves & Fittings......................................
Round Bar Holders..................................
Cube System..............................................
Glass Clamps.............................................
218
221
225
227
228
229
Reproduction Prohibited
•
•
•
•
•
•
End Caps and Spherical Finials .................... 232
Newel Posts...................................................... 234
247
Cable System..................................................... 250
Woodinox.......................................................... 253
Accessories & Schematics.............................. 255
by
217
Ø = diameter
C
ØA
AISI 316
Iron
Dimensions
ØB
E0011
E4806
1 1/3” dia. x 5/64” x 9’- 10”
E0011/6000
E4806/6000
1 1/3” dia. x 5/64” x 19 - 8”
E001/38
E4801/38
1 1/2” dia. x 5/64” x 9’- 10”
E001/38/6000
E4801/38/6000
1 1/2” dia. x 5/64” x 19 - 8”
E001
E4801
I001
1 2/3” dia. x 5/64” x 9’- 10”
E001/6000
E4801/6000
I001/6000
1 2/3” dia. x 5/64” x 19 - 8”
E0014
E4483
For tube A
B
C
1 2/3” dia. x 5/64”
3 17/64”
2 23/64”
ØB
ØA
2” dia. x 5/64” x 9’- 10”
E0014/6000
2” dia. x 5/64” x 19’- 8”
E10204040
1 9/16” x 1 9/16” x 5/64” x 9’
x 10” Square Tube
120°
E00204040
AISI 316
C
AISI 304
12
0°
AISI 316
AISI 316
Iron
Dimensions
E0052
5/16” dia. x 9’- 10”
E0052/6000
5/16” dia. x 19’- 8”
E0051
3/8” dia. x 9’- 10”
E0051/6000
3/8” dia. x 19’- 8”
E4851
I005
1/2” dia. x 9’- 10”
E005/6000
E4851/6000
I005/6000
1/2” dia. x 19’- 8”
E0050
9/16” dia. x 9’- 10”
E0050/6000
9/16” dia. x 19’- 8”
1 1/2” dia. x 5/64”
E456
1 2/3” dia. x 5/64”
C
3 15/16”
1”
Ø 3 15/16”
ØA
3 15/16” dia. x 15/64”
E005
E456/38
B
AISI 304
Iron
E0212
15/64”
AISI 304
For tube A
Ø 7/16
For tube A
1 1/3” dia. x 5/64”
E0213
I0213
1 2/3” dia. x 5/64”
1 2/3” dia. x 5/64”
15/64”
Ø 3 15/16”
ØA
Ø 7/16”
AISI 316
Dimensions
For tube A
E403
3 15/16” dia. x 15/64”
3 holes 7/16” dia.
1 2/3” dia. x 5/64”
15/64”
3 15/16” x 3 15/16”
ØA
AISI 316
E404304
ARTEFERRO
218
by
Reproduction Prohibited
Ø 7/16”
For tube
For tube A
Square plate 3 15/16” Sq.
4 holes 7/16” dia.
1 2/3” dia. x 5/64”
Ø = diameter
ØA
1 3/8”
1 2/3” dia. x 5/64”
AISI 316
E401/304
E401
1/4”
/16”
Ø7
AISI 304
For tube A
1 2/3” dia. x 5/64”
3 15/16”
6”
Ø 7/1
For tube A
E111/38
1 1/2” dia. x 5/64”
E111
1 2/3” dia. x 5/64”
3 5/16”
ØA
3 3/8”
3 5/32”
3 5/32”
1/4”
Ø7/16”
73.5
2 3/16”
1/4”
2 7/8”
Ø7/16”
2 9/16”
Ø 3 5/16”
Ø 3 5/16”
2 9/16”
ØA
3 15/16”
2 3/5”
AISI 304
3 15/16”
2 3/5”
3 15/16” dia. x 15/64”
3 15/16” dia. x 15/64”
Ø 7/1
For tube A
E400
ØA
3 15/16”
4 29/32”
1/4”
3 15/16”
6”
AISI 316
E400/304
M8
4 15/16” dia. x 5/16”
Ø 3 15/16”
2 3/5”
2 15/16”
2 15/16”
M8
AISI 304
ØA
2 3/16”
ØA
AISI 316
For tube A
E4566
1 3/8”
1 1/8”
E112
1 2/3” dia. x 5/64”
ØA
1/2”
Ø 5/16”
7 3/32”
6 3/16”
17/32”
3 1/4”
7/16”
90°
Ø 11/32”
5 33/64”
AISI 304
E1114
For tube A
1/4”
3 1/4”
Ø 1”
M10
11/16”
1 9/16”
1 2/3” dia. x 5/64”
7/16”
1 2/3” dia. x 5/64”
Ø 7/16”
90°
1 21/32”
E4561
AISI 304
For tube A
5 3/32”
AISI 316
AISI 316
Dimensions
5 33/64” x 1 9/16” x 1 3/8”
7/16”
2 21/32
3 17/32”
3/8”
7/16”
B
For tube A
E406
B
1 2/3” dia. x 5/64” 1 15/16”
Ø 5 29/32”
ØA
TO BE CEMENTED
3 15/16”
2 11/32”
AISI 304
E116
1/2”
4 23/32”
A
For tube A
ALUMINIUM
For tube
1 2/3” dia. x 5/64”
E0131
1 1/3” dia. x 5/64”
1 5/32”
E013
1 2/3” dia. x 5/64”
1 1/2”
A
Ø 7/16”
ØA
3 15/16”
A
B
AISI 304
For tube A
B
ALUMINIUM
For tube
A
E11420
1 2/3” dia. x 5/64” 2 31/64”
E0141
1 1/3” dia. x 5/64” 1 5/32” blind hole M8
E11440
Flat face
E014
1 2/3” dia. x 5/64” 1 1/2” blind hole M8
ARTEFERRO
Reproduction Prohibited
by
219
Ø = diameter
D
D
ØA
H
ØF
Iron
E0191
E019/38
E4019/38
E019
I020
Dimensions A Hole F
Height
H
AISI 304
3 15/64” dia.
1 23/64” dia.
19/32”
E064
3 5/32” dia. x 5/32”
3 15/64” dia.
1 1/2” dia.
19/32”
E065
3 15/16” dia. x 5/32”
3 15/64” dia.
1 11/16” dia.
19/32”
E020
E4072
4 9/64” dia.
1 11/16” dia.
19/32”
E020/38
E4072/38
4 9/64” dia.
1 11/16” dia.
19/32”
E4073
4 9/64” dia.
1 15/16” dia.
63/64”
5 5/64” dia.
1 11/16” dia.
63/64”
E0204
5 5/64” dia.
1 15/16” dia.
63/64”
E02011
4 9/64” dia.
2” dia.
63/64”
5 45/64” dia.
2 13/32” dia.
63/64”
2 7/16” dia.
1/2” dia.
19/32”
2 63/64” dia.
1/2” dia.
1/2” dia.
2 63/64” dia.
37/64” dia.
1/2” dia.
E4077
E0181
E0182
I0182
E0183
D
E0682
D
3 15/16” dia. x 15/64”
ØA
ALUMINIUM
Dimensions A External holes
Internal hole
E015
2 11/64” dia.
3 x 15/64” dia.
5/16” dia.
E016
2 61/64” dia.
4 x 15/64” dia.
5/16” dia.
E017
3 47/64” dia.
4 x 15/64” dia.
5/16” dia.
D
1 11/16” dia.
1 11/16” dia.
D
Central
hole
External
holes
AISI 304
E0691
3 15/16” dia. x 15/64”
1 11/16”
2 x 23/64”dia.
E0696
3 15/16” dia. x 15/64” 1 11/16”
3 x 23/64” dia.
E0691/D
3 15/16” dia. x 15/64”
1 11/16”
2 x 23/64”dia.
E0696/D
3 15/16” dia. x 15/64” 1 11/16”
3 x 23/64” dia.
AISI 304
Countersunk holes and chamfered perimeter
D
by
Central hole
Countersunk holes and chamfered perimeter
ARTEFERRO
220
AISI 304
D
8
AISI 304 AISI 316
Reproduction Prohibited
External holes
Ø = diameter
Ø 1/2”
13/32”
13/32”
Ø 1/2”
ØA
AISI 303
AISI 316
Iron
ØA
For tube A
E0301
AISI 303
H
AISI 316
1 1/3” dia x 5/64”
2 61/64”
E0311
1 2/3” dia x 5/64”
2 61/64”
E031/S38
E031/S38/316
E030/S/38/316
1 1/2” dia x 5/64”
2 61/64”
E031/S1
E031/S1316
E030/S1316
2” dia x 5/64”
2 61/64”
E031/S2
E030/S
E030/S/316
E030/S/38
E030/S1
2 17/32”
H
H
1 1/16”
I030/S1
1 3/16”
Iron
I031/S1
For tube A
H
1 1/3” dia x 5/64”
2 61/64”
1 1/2” dia x 5/64”
2 61/64”
1 2/3” dia x 5/64”
2 61/64”
2” dia x 5/64”
2 61/64”
H
2 3/8”
13/32”
3/4” dia.
ØA
AISI 304
For tube A
E030
1 2/3” dia. x 5/64”
H
2 1/4”
1 3/16”
2 3/8”
13/32”
H
3/4” dia.
ØA
AISI 304
For tube
E031
1 2/3” dia x 5/64”
H
2 1/4”
3 1/8”
3” - 1
2/3”
7/8”
H
Ø 1 1/
ØA
For tube A
H
E4581
1 2/3” dia. x 5/64”
2 23/64”
Ø1
2 19/32”
Ø1
1/3”
-1
2/3”
2 19/32”
2 15/16”
Ø 1/2”
Ø 9/16”
1 5/16”
ØA
Ø 9/16”
1 5/16”
/3”
12
/3”
12
adjustable
”-
1/3
H
Ø1
”-
1/3
adjustable
AISI 316
ARTEFERRO
Ø 1 2/3”
Ø 1 2/3”
AISI 316
For tube A
H
AISI 316
For tube
AISI 316
For tube
E458
1 2/3” dia.
2”
E500/424
1 2/3” dia. x 5/64”
E510/424
1 2/3” dia. x 5/64”
Reproduction Prohibited
by
221
Ø = diameter
Ø1
”-
1/3
7/16”
/3”
12
2 1/2”
1 13/20”
7/16”
Ø1
”-
1/3
7/16”
/3”
12
2 1/2”
1 7/8”
7/16”
Ø1
Ø 15/32”
ØB
Ø 15/32”
2 9/32”
H
H
2 1/2”
/3”
12
Ø 1/4”
Ø 1/4”
AISI 303
For tube A
E039100
1 2/3”dia. x 5/64”
ØA
ØA
ØA
H
3 15/32”
AISI 303
For tube A
E039300
1 2/3”dia. x 5/64”
H
3 15/32”
Ø1
/3”
AISI 303 AISI 316
For tube A
E0104
1 2/3” dia. x 5/64” 3/4” dia.
E0104316
Ø1
2 1/2”
/3”
12
B
ØA
2 9/32”
”-
1/3
/3”
12
1
19/32” dia.
H
2 9/32”
ØB
1/2”
1/2”
2 1/8”
Ø 3/4”
ØA
AISI 303 AISI 316
For tube A
E0102
1 2/3” dia. x 5/64”
E0102316
”-
1/3
ØA
ØA
B
3/4” dia.
AISI 303
For tube A
AISI 303
For tube A
E031/S
1 2/3” dia. x 5/64”
E038500
1 2/3”dia. x 5/64”
H
3 3/4”
”
-1
/3”
Ø
2/3
11
”
/3”
Ø
-1
2/3
11
19/32” dia.
H
H
19/32” dia.
ØØAA
AISI 303
For tube A
E038700
1 2/3”dia. x 5/64”
H
3 3/4”
Ask for our
complete catalog
w w w. a r t e fe rro.com
ARTEFERRO
222
by
Reproduction Prohibited
S
3 3/32”
Ø = diameter
Ø 1 1/3
3 1/3”
S
” - 1 2/3
”
Ø 1 1/
3” - 1
2/3”
A
2 17/32”
A
1”
3 1/8”
4 29/32”
1 31/32”
Ø 1 23/32
Ø13/16”
7 7/8”
Ø 3/4”
E035300
AISI 303 AISI 316
Description S
E035300316 For glass thickness 5/16” - 1”
Glass to be drilled at 55/64” dia.
E022/S1
Description S
E022/S1316 For glass thickness 5/16” - 1”
Glass to be drilled at 55/64” dia.
2 9/32”
64
AISI 303
Dimensions
For tube A
E0225
1/2” dia. x 4 59/64”
1 1/3” - 1 2/3” dia.
E0226
9/16” dia. x 4 59/64”
1 1/3” - 1 2/3” dia.
2 7/8”
1/4”
2 1/2”
7/16” 1 21/32” 7/16”
ØA
3,7
Ø3
,4
- 42
Ø 1/2”
3 11/32”
Ø 1/4”
Ø 2 3/4”
4 1/8”
Ø 2 3/4”
Ø1/2”
2 1/2”
3 3/32”
2 7/8”
1/4”
2 23/32
AISI 304 AISI 316
1 13/16
1 13/16”
E02231/38
E02231
M8
1/4”
E02231316
2 7/8”
2 21/32”
M6
For tube
AISI 304
Description
1 1/2” dia.
E0222
Without thread
1 2/3” dia.
2 1/2”
1 27/32”
Ø 5/32”
/3”
-1
”
2/3
Ø1
3 3/32”
E015
”-
1/3
/3”
12
Ø3/4”
E018
°
120
°
Ø 2 1/2”
Ø 8/37”
°
120
120
Ø 2 3/4”
Ø 1/2”
11
2 23/32”
Ø
3 13/32”
1 2/3” dia.
AISI 316
Ø 2 15/32”
Ø1/4”
E031/S6
AISI 304
0°
For tube A
12
AISI 303
Ø 40
5/16”
1 13/16”
3 9/32”
1 27/32”
AISI 304
E0224
Description
AISI 316
For tube
AISI 304
For tube
With internal thread M6
E459
1 2/3” dia.
E022/S
1 2/3” dia.
2 3/4”
2 7/8”
2 1/2”
7/16” 1 21/32” 7/16”
6
2 19/32”
Ø1
1/3”
-1
2/3”
”
Ø 1/4”
3 7/32”
Ø 1/2”
Ø 70
Ø 1/2”
3 11/32”
2/3
Ø1
1 13/16”
For tube A
Ask for our
complete catalog
E4583/424
1 2/3” dia.
w w w. a r t e fe rro. c o m
E4583
square
AISI 316
AISI 304
AISI 316
Iron
E0223/38
E0223
For tube
1 1/2” dia.
E0223316
I0223
1 2/3” dia.
2 3/4”
3 7/32”
Ø1
AISI 316
E4584/424
2 15/16”
2/3”
Ø 1/2”
For tube A
1 2/3” dia.
ARTEFERRO
Reproduction Prohibited
by
223
Ø = diameter
ØA
ØA
H
H
H
ØA
AISI 316
For tube A
E4541
1 2/3” dia.
B
ØA
ØA
ØB
H
3 17/64” dia. 2 41/64”
AISI 316
For tube A
H
AISI 316
For tube A
E491
1 2/3” dia. x 5/64”
1/2”
E454
1 2/3” dia. x 3/32”
E494
2” dia. x 5/64”
5/8”
E2054
2” dia. x 5/64”
1/4”
23/64”
2 23/32”
2 23/32”
ØA
H
2 23/32”
Threaded Inside
Threaded Inside
B
B
2 23/32”
ØA
M8
Pivotable
E011948
E011947
M8
AISI 304
Description A x B
AISI 304
Description
AISI 304
Description
E011931
1/2” dia. x 2 9/16”
E011941
1/2” dia. x 2 9/16”
E011947
With 1 internal
thread M6
E011948
With 2 internal
threads M6
1/8”
1”
Ø 1/4”
2 1/2”
Ø 1/3”
ØA
1 13/20”
AISI 304
For tube A
1 1/2” dia
1 2/3” dia
E011976
Flat face
Ø 1/4”
Ø 1/3”
E01197/38
E01197
90°
ARTEFERRO
224
by
AISI 304
For tube
E011971
1 2/3” dia.
Reproduction Prohibited
Curves can be custom made for any angle. Contact Indital for details.
Ø = diameter
Cr
Cr
Cr
Cr
30°
45°
60°
90°
AISI 303
AISI 303
For tube
Cr
AISI 303
For tube
Cr
AISI 303
For tube
Cr
E028/30
1 2/3” dia x 5/64”
4 11/64”
E028/45
1 2/3” dia x 5/64” 4 11/64”
E028/60
1 2/3” dia x 5/64” 4 11/64”
E028/90
E0281/30
1 1/3” dia x 5/64”
3 11/32”
E0281/45
1 1/3” dia x 5/64” 3 11/32”
E0281/60
1 1/3” dia x 5/64” 3 11/32”
E0281/90
Iron
I028/90
For tube
Cr
1 2/3” dia x 5/64” 4 11/64”
1 1/3” dia x 5/64” 3 11/32”
X
180°
AISI 303
For tube
X
E028/180
1 2/3” dia x 5/64” 10 3/16”
E0281/180
1 1/3” dia x 5/64” 8 7/16”
3 19/20”
BRASS
Art. no. For tube
E024
1 2/3” dia x 5/64”
E0241
1 1/3” dia x 5/64”
ARTEFERRO
B
B
A
ØA
A
B
ØA
ØA
ØA
AISI 316
For tube A
AISI 316
B
E2035
For tube A
1 2/3” dia. x 5/64”
AISI 316
B
E2031
1 1/3” dia. x 5/64”
2 11/64”
E203/38
1 1/2” dia. x 5/64”
2 11/64”
E450
E203
1 2/3” dia. x 5/64”
2 3/4”
E2004
E20321
2” dia. x 5/64”
2 23/64”
Iron
E450/38
3 1/2”
For tube
A
1 1/2” dia. x 5/64” 2 33/64”
I450
1 2/3” dia. x 5/64”
2 9/16”
2” dia. x 5/64”
3 1/16”
B
B
ØA
ØA
B
AISI 316
Iron
E453/38
E453
E20371
I453
For tube A
B
1 1/2” dia. x 5/64”
3 7/16”
1 2/3” dia. x 5/64”
3 7/16”
2” dia. x 5/64”
2 41/64”
AISI 316
E2045
For tube A
1 2/3” dia. x 5/64”
Reproduction Prohibited
AISI 316
B
3 7/16”
by
For tube
E4471/38
1 1/2” dia. x 5/64”
E4471
1 2/3” dia. x 5/64”
225
2 33/64”
2 33/64”
AISI 316
Iron
For tube
E451/38
E451
1 1/2” dia. x 5/64”
I451
1 2/3” dia. x 5/64”
E2014
2” dia. x 5/64”
55
/64
55/64”
2 5/64”
”
AISI 316
Iron
E446/38
E446
For tube
1 1/2” dia. x 5/64”
I446
1 2/3” dia. x 5/64”
ARTEFERRO
BENDABLE TUBE CONNECTORS
EASY TO BEND
A
A
AISI 316 ZAMAC
E2015
For tube
I2015
E2020
A
1 2/3” dia. x 5/64” 2”
2” dia. x 5/64”
AISI 316
AISI 316
For tube
E4491
1 2/3” dia. x 5/64”
E455200
2”
AISI 316
For tube
E455/38
1 1/2” dia. x 5/64”
E455
1 2/3” dia. x 5/64”
E20621
2” dia. x 5/64”
For welded applications.
AISI 316
E5587
226
by
For tube
AISI 304 AISI 316
For tube
1 2/3” dia. x 5/64”
E706
1 2/3” dia. x 5/64”
E802
ARTEFERRO
Reproduction Prohibited
For tube
1 2/3” dia. x 5/64”
1 3/16”
25/32”
Ø = diameter
1 3/8”
25/32”
B
B
Ø 3/4”
Ø
A
Ø 7/8”
ØB
A
ØB
For tube A
Hole B
AISI 316
E006911
1 1/3” dia.
1/2” dia. through
E006913
1 1/3” dia.
9/16” dia. through
E0069/38
1 1/2” dia.
1/2” dia. through
E006910
1 2/3” dia.
13/32” dia. through
1 2/3” dia.
1/2” dia. through
E00691
1 2/3” dia.
9/16” dia. through
E00692
Flat face
1/2” dia. through
E006914
2” dia.
1/2” dia. through
2” dia.
9/16” dia. through
E0069
E4042
I0069
A
E40651
1 7/8”
1”
For tube
Round bar B
Flat face
1/2” dia.
A
Ø 1”
ØB
Round bar B
Round face
1/2” dia.
1”
ØA
ØB
2”
B
straight - Can be used at 90°
AISI 303 AISI 316
Iron
Hole A
Hole B
AISI 303
For tube
Hole A
E006966316 I006966 1/2” dia.
1/2” dia.
E00693
1 2/3” dia.
9/16” dia.
E006976
9/16” dia.
1/2” dia.
E006977
9/16” dia.
9/16” dia.
AISI 303
For tube A
Round bar B
E006999
1 2/3” dia.
1/2” dia.
E0069996
1 1/3” dia.
1/2” dia.
ØA
a
A
60°
ØA
ØB
A
1”
Adjustable
Ø 25
1 1/4”
M6
E006966
E41651
For tube
2”
ØA
ØA
AISI 316
ØB
Iron
Ø 7/8”
AISI 303 AISI 316
”
/16
AISI 303 AISI 316
E006
E006316
Iron
I006
E0066
Hole A
Description
1/2” dia.
Through
9/16” dia.
Through
13
2 9/32”
ØB
For Tube 1 1/3” and 1 2/3” dia.
AISI 303
E0074
For tube
Round bar A
1 2/3” dia.
1/2” dia.
AISI 303
a°
For tube A
Round bar B
E0069991
1 2/3” dia.
1/2” dia.
22-33
E0069997
1 1/3” dia.
1/2” dia.
22-33
Adjustable
A
2 9/32”
I0070
E0071
Round bar A
3 1/3”
1/2” dia.
ØA
9/16” dia.
Easy to model
AISI 303
For tube A
Hole B
E00697110
1 1/3” and
1 2/3” dia.
13/32” dia.
3 1/3”
ØA
ØA
25
ØB
AISI 303
ØA
E0070
Iron
ØA
AISI 303
AISI 316
Round bar A
E00700
E00700316
13/32” dia.
E00710
E00710316
1/2” dia.
Reproduction Prohibited
ARTEFERRO
by
227
H
A
Ø 11
Ø 15/32”
A
A
AISI 304
AISI 316
E00204040
E10204040
AISI 304
Lenght 9’- 10”
1 9/16” x 1 9/16” x 5/64”
E11440
For tube
AISI 304
A
Flat face
E037200
AISI 316
E037210
H
2 61/64”
E004720056 9/16” x 3/16” Flat bar
A
For handrail For square tube A
1 2/3” dia.
1”
1 9/16” x 1 9/16” x 5/64”
2 1/2”
B
Ø 15/32”
H
A
B
A
A
• Cube System
63
A
AISI 316
For tube A
E4723
1 9/16” x 1 9/16” x 5/64” 1”
AISI 316
For tube
AISI 304
E4230
1 9/16” x 1 9/16” x 5/64”
E037600
AISI 316
E037610
H
For handrail For square tube A
2 61/64”
1 2/3” dia.
1 9/16” x 1 9/16” x 5/64”
°
90
°
90
B
B
A
A
B
A
B
A
B
A
A
AISI 316
For tube A
AISI 316
For tube A
E4743
1 9/16” x 1 9/16” x 5/64”
E4733
1 9/16” x 1 9/16” x 5/64” 1”
B
AISI 316
For tube A
E4713
1 9/16” x 1 9/16” x 5/64” 1”
B
B
1”
1”
1”
1”
AISI 316
For tube
E4760
1 9/16” x 1 9/16” x 5/64”
AISI 316
For flat bar
E004720054 9/16” x 3/16”
3 15/16”
4 1/8”
7/16”dia.
Thickness 15/64”
AISI 304 AISI 316
For tube
AISI 316
E02050
1 9/16” x 1 9/16”
E02052316 1 39/64” x 1 39/64”
E02050316
Hole
Height
19/32”
4 9/64” dia.
19/32”
AISI 304 AISI 316
ARTEFERRO
228
by
E02051
Hole
E02051316 1 39/64” x 1 39/64”
Reproduction Prohibited
AISI 316
For tube
E4701
1 9/16” x 1 9/16” x 5/64”
2 33/64”
2 3/8”
Certified and Tested
1 11/16”
E009/38
1 1/2” dia.
5/16” and 3/8”
E009
1 2/3” dia.
5/16” and 3/8”
E0090
1 7/8” dia.
5/16” and 3/8”
E0091
Flat face
5/16” and 3/8”
2 3/8”
Glass thickness
2 33/64”
For tube
2 3/4”
2 5/8”
2 3/8”
AISI 316
2 5/64”
For tube
Glass thickness
E00950
1 2/3” dia.
5/16” and 3/8”
E00951
1 7/8” dia.
5/16” and 3/8”
2 5/64”
Glass thickness
E00971
1 2/3” dia.
1/2”
1 7/8” dia.
1/2”
E00973
Flat face
1/2”
2 3/4”
1 1516”
2 3/64”
AISI 316
1 1/2”
2 3/8”
For tube
E00972
2 3/4”
For tube
Glass thickness
E00955
1 2/3” dia.
5/16” and 3/8”
E00956
1 7/8” dia.
5/16” and 3/8”
1 1/2”
E00913
E00912
AISI 316
2 3/4”
2 33/64”
AISI 316
• Glass Clamps
AISI 316
Glass Clamps
1 11/16”
E00911
Glass thickness
E00913
1 1/3” dia.
5/16” and 3/8”
E00912
1 2/3” dia.
5/16” and 3/8”
E00911
Flat face
5/16” and 3/8”
2 3/64”
2 3/64”
For tube
2 9/32”
AISI 316
2 3/64”
Glass thickness
E0092
1 2/3” dia.
5/16” and 3/8”
E0093
Flat face
5/16” and 3/8”
E00981
1 2/3” dia.
3/8” and 1/2”
E00983
Flat face
3/8” and 1/2”
1 7/8”
For tube
1 11/16”
AISI 316
E00921
For tube
Glass thickness
1 2/3” dia.
5/16” and 3/8”
ARTEFERRO
Reproduction Prohibited
by
229
2 3/64”
2 5/8”
1 1/2”
1 11/16”
ZAMAC
For tube
Glass thickness
1 2/3” dia.
5/16”
ZAMAC
and 3/8”
For tube
Glass thickness
E00850
1 2/3” dia.
1/4”
E00851
1 1/3” dia.
1/4” and 5/16”
and 5/16”
2 3/64”
2 33/64”
E00871
STAINLESS STEEL EFFECT
2 9/32”
• Glass Clamps
STAINLESS STEEL EFFECT
1 1/2”
1 11/1
2 3/4”
6”
STAINLESS STEEL EFFECT
ZAMAC
E00860
GOLD PLATED
For tube
Glass thickness
1 1/3” dia.
5/16” and 3/8”
ZAMAC
For tube
E00731
E00732
Glass thickness
E00730
1 2/3” dia.
5/16” and 3/8”
E00731
1 2/3” dia.
5/16” and 3/8”
E00732
1 1/3” dia.
5/16” and 3/8”
AVAILABLE UPON REQUEST
ANCHORAGE FLANGE
E0700 AISI 304 - E0700316 AISI 316
6 17/64”
Glass Clamp for Ground & Wall Anchorage
E00730
+
AISI 303 AISI 316
E2000100
E0700
(AISI 304)
E0700316 (AISI 316)
Glass Thickness
3 15/16” dia. x 15/64”
E20000200 1/2” and 17/52”
Countersunk holes
and chamfered perimeter
Round support complete with threaded
screw and glass attachment.
AISI 304
Glass Thickness
E2200300
From 5/8” to 7/8”
6 1/32”
M 12
1 9/16”
A
ARTEFERRO
230
by
=
Reproduction Prohibited
DA VINCI CLAMP SYSTEM
patented
Certified and Tested
Glass Clamps
AISI 304 AISI 316
For glass
ST
IGN
O REGIST
LL
TO REGI
RA
MODE
7 7/8”
E00880
ERED DES
E00880316
from 11/32” to 1/2”
10
30
3 15/16”
AISI 316
29
AISI 316
E00840
Dimensions
2 3/8” dia.
Glass thickness
For tube
E00842
1 2/3” dia.
E00843
Flat face
E00845
1 1/2”
AISI 304 AISI 316
E00881
E00881316
No.2 of pieces in set
For tube
E00882316
1 2/3” dia.
E00883316
Flat face
To use with these article numbers:
E00820 - E00821 - E00820316 - E00821316 E00830 - E00831 E00830316 - E00831316 -E00840
Description
Stainless steel closure satin
finished, fundamental to
obtain a glass holder for
just one glass
E00842
E00843
For Glass
E00840/R1
11/32”
E00840/R2
3/8”
E00840/R3
7/16”
E00840/R4
1/2”
E00840/R5
E00842
1/2”
THE INTERCHANGEABLE CLAMP
CAN BEE00843
USED
WITH ALMOST ANY TUBE!
E00843
E00840/C
E00840/C
9/16”
1 3/16” dia.
E00842
Rubber
1 3/16” dia.
0
R3
E00840/C
from 11/32” to 1/2”
5/16”
AISI 316
AISI 316
For glass
AISI 316
For tube
E40581
1 2/3” dia.
E40583
Flat face
AISI 316
E4032
Hole
1/2” dia.
E00840/C
LATERAL
LOCKING PERMITS
TRANSFORM
TO A SINGLE GLASS SUPPORT
THE MOVABLE CLAMP PERMITS ROTATION
OF THE GLASS A ROUND MOUNTED POST
AISI 316
For tube
E40510
1 2/3” dia.
AISI 316
For tube
E40560
1 2/3” dia.
E40570
Flat face
• EASY TO INSTALL • ECONOMICAL • SAFE
Reproduction Prohibited
by
231
M8
M8
H
H
H
AISI 316
AISI 303
H
1 2/3” dia. x 5/64” 9/32”
Iron
For tube
AISI 303
H
E01111
1 1/3” dia. x 5/64” 21/32”
E01196/38
E01112
1 2/3” dia. x 5/64” 3/4”
E01196
I01112
Iron
For tube
I01196
H
1 1/2” dia. x 5/64”
9/32”
1 2/3” dia. x 5/64”
9/32”
M
• End Pieces
E4130
For tube
8
H
45°
ØA
AISI 303
AISI 303
Dimensions
AISI 303 AISI 316
For tube
E0117
1 1/3” dia. x 5/64”
E01212
1 2/3” dia. x 5/64”
E0119/38
1 1/2” dia. x 5/64”
E0119
Iron
I0119
E01190
E02212
H
For tube
E0111
1 1/3” dia. x 5/64”
3/4”
E011
1 2/3” dia. x 5/64”
3/4”
1 2/3” dia. x 5/64”
2” dia.
M8
For tube
AISI 303
For tube
E01158
1 2/3” dia. x 5/64”
E0115
1 1/3” dia. x 5/64”
E0115/38
1 1/2” dia. x 5/64”
E01151
1 2/3” dia. x 5/64”
E01155
2” dia. x 5/64”
AISI 316
For tube
Tube thickness
E316
1 2/3” dia.
1/16” - 3/32”
E315
1 1/3” dia.
1/16” - 3/32”
E4090
1 2/3” dia.
5/64” - 3/32”
E4091
1 7/8” dia.
5/64” - 3/32”
AISI 316
E4100
For tube
1 2/3” dia. x 5/64”
11/32”
AISI 303
AISI 316
E4141
ARTEFERRO
232
by
Reproduction Prohibited
For tube
1 2/3” dia. x 5/64”
AISI 303 AISI 316
For tube
E0118
1/2” dia. x
5/256”
E0118316
A
2 1/8”
H
B
filetto M
ØA
E481
For tube
Dimensions B x A
1 2/3” dia. x 5/64” 3 1/8” x 2 23/64”
AISI 316
For tube
AISI 303
E452
1 2/3” dia. x 5/64”
E0101
Iron
E010
I010
For tube A
H
Thread M
1 1/3” dia. x 5/64”
1 3/16”
M8
1 2/3” dia. x 5/64”
1 13/16”
M10
ØB
• End Pieces
AISI 316
H
AISI 316
For tube
Dimensions
AISI 316
AISI 316
For tube
For tube
B
H
E461
1 2/3” dia.
2 1/8” dia.
E465
1 2/3” dia. x 5/64”
E457
1 2/3” dia. x 5/64”
2 3/4” dia.
4 1/6”
E469
2” dia.
2 33/64” dia.
E468
2” dia. x 5/64”
E4572
2” dia. x 5/64”
3 5/32” dia.
4 3/4”
Hole
AISI 303
E012
Iron
I012
E0120
9/16”
dia.
AISI 303 AISI 316
Hole
Dimensions
1/2”
dia.
AISI 303 AISI 316
Iron
Dimensions
Dimensions
Thread
2 23/64” dia.
M10
E0128
1” dia. blind hole
E01261
2” dia.
M8
E01281
1” dia. hole
E0127
E01301
1 3/16” dia. hole
E0129
1” dia. hole
E0130
1 3/16” dia. hole
E4309
25/32” dia. blind hole
E4308
I0127
1” dia. blind hole
Ø 19
ØA
AISI 303
E01196100
For tube A
Through hole
1 2/3” dia. x 5/64”
31/64” dia.
ARTEFERRO
Reproduction Prohibited
by
233
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
X
• Round Newel Posts
AISI 316
E0696/D
H
AISI 304
X
H
E00422316
E00422
1 1/3” dia. x 5/64”
47 1/4”
E0042316
E0042
1 2/3” dia. x 5/64”
39 3/8”
E0040316
E0040
1 2/3” dia. x 5/64”
47 1/4”
E0047316
E0047
2” dia. x 5/64”
39 3/8”
E0046316
E0046
2” dia. x 5/64”
47 1/4”
E0042/904316
E0042/904
1 2/3” dia. x 5/64” (Pre-Drilled) with M8 Corner
39 3/8”
E0042/2316
E0042/2
1 2/3” dia. x 5/64”(Pre-Drilled) with 2 Holes, M8
39 3/8”
E0042/4316
E0042/4
1 2/3” dia. x 5/64”(Pre-Drilled) with 4 Holes, M8
39 3/8”
E0042/10316
E0042/10
1 2/3” dia. x 5/64”(Pre-Drilled) with 10 Holes, M5 39 3/8”
Satin finish, with grain size 240, complete with welded flange
X
AISI 316
AISI 304
E004501316
E004501
1 1/3” dia. x 5/64”
47 1/4”
E00450316
E00450
1 2/3” dia. x 5/64”
47 1/4”
E00451316
E00451
2” dia. x 5/64”
47 1/4”
X
H
Satin finish, with grain size 240, complete with lateral flange
E113
2 3/4”
H
X
AISI 316
AISI 304
E00411316
E00411
1 1/3” dia. x 5/64”
47 1/4”
E0043316
E0043
1 2/3” dia. x 5/64”
39 3/8”
E0041316
E0041
1 2/3” dia. x 5/64”
47 1/4”
Art. no.
H
X
Art. no.
Satin finish, with grain size 240,
complete with flange.
Handrail is angled and extended for
maximum security, making it difficult
to climb over.
234
by
H
Reproduction Prohibited
FOR handrailS THAT
ARE Angled and
extended for
maximum security
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
X
AISI 316
AISI 304
X
H
E0045
1 2/3” dia. x 5/64”
47 1/4”
E00452
2” dia. x 5/64”
47 1/4”
FOR handrailS THAT
ARE Angled and
extended for
maximum security
Satin finish, with grain size 240.
Complete with wall mouting plate.
Handrail support pivotable, angled
and extended for maximum security,
making it difficult to climb over.
H
• Round Newel Posts
E0045316
E00452316
ARTEFERRO
Stainless Steel Newel Posts Round
AISI 304
Newel post dia.
EM4331209
EM2331209
1 1/3” dia. x 5/64”
9
1/2”
4”
39 3/8”
EM4421009
EM2421009
1 2/3” dia. x 5/64”
9
3/8”
4”
39 3/8”
EM4421209
EM2421209
1 2/3” dia. x 5/64”
9
1/2”
4”
39 3/8”
N° bar holder
bar diameter
Y
NEW
H
E0069
Satin finish, with grain 240, complete with fixed handrail, round bar supports,
mounting plate and flange canopy
Y measurement is taken from center of holes
AISI 316
H
Y
Ask for our
complete catalog
www. a r t e fe rro. c o m
Reproduction Prohibited
by
235
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
• Round Newel Posts
NEW
AISI 316
E0069
Y
H
AISI 304
Newel post dia.
EM433120990
EM233120990
1 1/3” dia. x 5/64”
9
1/2”
4”
39 3/8”
EM442100990
EM242100990
1 2/3” dia. x 5/64”
9
3/8”
4”
39 3/8”
EM442120990
EM242120990
1 2/3” dia. x 5/64”
9
1/2”
4”
39 3/8”
by
Y
H
Satin finish, with grain 240, complete with fixed handrail support for corners,
round bar supports for corners, mounting plate and flange canopy
ARTEFERRO
236
N° bar holder bar diameter
Reproduction Prohibited
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
AISI 304.
Newel post dia.
EL4331209
EL2331209
1 1/3” dia. x 5/64”
9
1/2”
4”
47 1/4”
EL4421009
EL2421009
1 2/3” dia. x 5/64”
9
3/8”
4”
47 1/4”
EL4421209
EL2421209
1 2/3” dia. x 5/64”
9
1/2”
4”
47 1/4”
N° bar holder
bar diameter
Y
NEW
H
E113
Y
H
Y + 7 7/8”
Satin finish, with grain 240, complete
with fixed handrail support, round bar
supports and wall anchor mounting plate
• Round Newel Posts
AISI 316
NEW
AISI 316
AISI 304
Newel post dia.
EK4421209
EK2421209
1 2/3” dia. x 5/64” 1/2”
bar diameter
Y
4”
Z
8 1/4”
1 2/3”
H
39 3/8”
Satin finish, with grain 240, complete with curved tube
for fixed handrail support, round bar support and mounting plate
Y
E031/S1
H
Z
ARTEFERRO
Reproduction Prohibited
by
237
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
NEW
• Round Newel Posts
23
/8”
1 2/3”
150°
AISI 316
AISI 304
Newel post dia.
EW4421211F
EW2421211F
1 2/3” dia. x 5/64” 1/2”
bar diameter N° bar holder
11
Z
H
9 7/8”
39 3/8”
Satin finish, with grain 240, curved tube, complete with fixed
handrail support, 11 round bar support and mounting plate with flange
canopy
Special Article
3 1/8”
3 15/16”
H
Z
NEW
23
/8”
1 2/3”
AISI 316
AISI 304
EW4421211S EW2421211S
150°
Newel post dia. bar diameter N° bar holder
1 2/3” dia. x 5/64” 1/2”
3 15/16”
3 1/8”
Z
ARTEFERRO
by
9 7/8”
H
39 3/8”
Satin finish, with grain 240, curved tube, complete with pivotable
handrail support, round bar support and mounting plate with flange canopy
Special Article
238
11
Z
Reproduction Prohibited
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
AISI 304
Newel post dia.
EP43304P
EP23304P
1 1/3” dia. x 5/64”
25 3/16”
39 3/8”
EP44204P
EP24204P
1 2/3” dia. x 5/64”
25 3/16”
39 3/8”
Y
H
NEW
THESE NEWEL POSTS
ARE EQUIPPED
WITH GLASS CLAMPS
E00960
H
Y
8 1/2”
Satin finish, with grain 240,
complete with handrail support,
4 glass clamps with 90° angles,
mounting plate and flange canopy
3/8” - 1/2” in.
AISI 316
AISI 304
Newel post dia.
EP43304P90
EP23304P90
1 1/3” dia. x 5/64”
25 3/16” 39 3/8”
EP44204P90
EP24204P90
1 2/3” dia. x 5/64”
25 3/16” 39 3/8”
Y
NEW
H
3/8” - 1/2” in.
THESE NEWEL POSTS
ARE EQUIPPED
WITH GLASS CLAMPS
E00960
Y
H
8 1/2”
Satin finish, with grain 240,
complete with handrail support, 4
glass clamps, mounting plate and
flange canopy
• Round Newel Posts
AISI 316
ARTEFERRO
Reproduction Prohibited
by
239
Stainless Steel Newel Posts Partially Pre-assembled in Round Sections
NEW
AISI 304
Newel post dia.
Y
H
EP43302P
EP23302P
1 1/3” dia. x 5/64”
25 3/16”
39 3/8”
No
EP44202P
EP24202P
1 2/3” dia. x 5/64”
25 3/16”
39 3/8”
No
Satin finish, with grain 240,
complete with handrail support,
2 glass clamps, mounting plate
and flange canopy
H Y
Pivotable handrail support
3/8” - 1/2” in.
THESE NEWEL POSTS
ARE EQUIPPED
WITH GLASS CLAMPS
E00960
8 1/2”
• Round Newel Posts
AISI 316
NEW
AISI 316
AISI 304
Newel post dia.
ER43304P
ER23304P
1 1/3” dia. x 5/64”
25 3/16”
47 1/4”
No
ER44204P
ER24204P
1 2/3” dia. x 5/64”
25 3/16”
47 1/4”
No
Y
H
Satin finish, with grain 240,
complete with handrail support,
4 glass clamps, mounting plate and
wall mounting plate
Y
Pivotable handrail support
3/8” - 1/2” in.
THESE NEWEL POSTS
ARE EQUIPPED
WITH GLASS CLAMPS
E00960
15”
H
NEW
Y
H
Left
Right
AISI 316
AISI 304
Newel post dia.
Y
H
Pivotable handrail support
ER43302PDX
ER23302PDX
1 1/3” dia. x 5/64”
25 3/16”
47 1/4”
No
ER44202PDX
ER24202PDX
1 2/3” dia. x 5/64”
25 3/16”
47 1/4”
No
ER43302PSX
ER23302PSX
1 1/3” dia. x 5/64”
25 3/16”
47 1/4”
No
ER44202PSX
ER24202PSX
1 2/3” dia. x 5/64”
25 3/16”
47 1/4”
No
15”
Satin finish, with grain 240, complete with handrail support, 2 glass clamps,
mounting plate and wall mounting plate
Left
240
by
Right
Reproduction Prohibited
GALVANIZED Steel Newel Posts
X
Iron
X
B
H
1 1/3” dia. x 5/64”
3 15/16” x 15/64”
47 1/4”
1 2/3” dia. x 5/64”
3 15/16” x 15/64”
39 3/8”
I0040
1 2/3” dia. x 5/64”
3 15/16” x 15/64”
47 1/4”
Galvanized iron that can
be painted, complete
with mounting plate
UPON REQUEST, WE
CAN PRODUCE OUR
COMPONENTS IN YOUR
CHOICE OF COLORS
H
• Round Newel Posts
I00422
I0042
B
X
Iron
X
B
H
I00441
1 1/3” dia. x 5/64”
3 15/16” x 15/64”
47 1/4”
I0043
1 2/3” dia. x 5/64”
3 15/16” x 15/64”
39 3/8”
I0041
1 2/3” dia. x 5/64”
3 15/16” x 15/64”
47 1/4”
Galvanized iron that can
be painted, complete
with mounting plate
UPON REQUEST, WE
CAN PRODUCE OUR
COMPONENTS IN YOUR
CHOICE OF COLORS
H
B
X
Iron
X
H
I00451
1 1/3” dia. x 5/64”
47 1/4”
I00450
1 2/3” dia. x 5/64”
47 1/4”
H1
I113
H
2 3/4”
UPON REQUEST, WE
CAN PRODUCE OUR
COMPONENTS IN YOUR
CHOICE OF COLORS
Galvanized iron that can
be painted, complete
with mounting plate
Reproduction Prohibited
by
241
GALVANIZED Steel Newel Posts
X
I0045
I113
H1
H
X
1 2/3” dia. x 5/64”
Galvanized iron that can be
painted, complete with wall
mounting plate. Handrail
support is pivotable, angled
and extended for
maximum security, making it
difficult to climb over.
H
47 1/4”
UPON REQUEST, WE
CAN PRODUCE OUR
COMPONENTS IN YOUR
CHOICE OF COLORS
2 3/4”
• Round Newel Posts
Iron
ARTEFERRO
242
by
Reproduction Prohibited
Stainless Steel Newel Posts in Square Sections
NEW
AISI 304
Dimensions
N° bar holder bar dia.
H
EQ2301209
1 3/16” x 1 3/16” sq.
9
1/2”
39 3/8”
EQ4401209
EQ2401209
1 9/16” x 1 9/16” sq.
9
1/2”
39 3/8”
Satin finish, with grain size 240, complete with
pivotable handrail support, round bar supports
and anchor plate
H
E006921
3 15/16” x 2 3/8”
AISI 316
AISI 304
Dimensions
Y
• Square Newel Posts
EQ4301209
4”
AISI 316
H
EQ43002P
EQ23002P
1 1/3” dia. x 5/64”
25 3/16”
39 3/8”
EQ44002P
EQ24002P
1 2/3” dia. x 5/64”
25 3/16”
39 3/8”
H
H
3/8” - 1/2” in.
Y
Y
7 3/32”
7 3/32”
THESE NEWEL POSTS
ARE EQUIPPED
WITH GLASS CLAMPS
E00983
ARTEFERRO
Reproduction Prohibited
by
243
• Double Plates Newel Posts
AISI 316
AISI 304
E00669316
E00669
N° holes for assembling of cross bar holdfers
8
Y
H
4”
37 15/16”
Satin finish grain size 240: plated, drilled and countersunk bars for
round bar supports complete with pivotable
handrail support and anchor plate
E051200
Y
H
E021200
3 15/16” dia.
AISI 316
AISI 304
E00559316
E00559
N° holes for assembling of cross bar holders
Y
8
4”
H
47”
Satin finish with grain size 240, complete with fixed
handrail support, round bar supports, anchor plate
E051200
Y
5 1/2”
H
Art. E112
Round Bar Supports for Double Plates Newel Post
AISI 316
AISI 304
Hole
E01316
E01
5/16”dia.
E02316
E02
13/32” dia.
1/2” dia.
E03316
E03
E04316
E04
9/16” dia.
E05316
E05
Without hole
In stainless steel, satin finish with grain size 240 and n° 2 assembly screws
TO BE USE WITH THESE COMPONENTS
E00668 - E00669 - E01668 - E01669 - E00668316 - E00669316
E01668316 - E01669316
E00558 - E00559 - E01558 - E01559 - E00558316 - E00559316
E01558316 - E01559316
244
by
Reproduction Prohibited
AISI 304
E000463316
E000463
E000465316
E000465
N° round bar supports For bar diameter
X
Y
H
9
3/8” dia.
5 1/2”
3 15/16”
43 1/4”
9
1/2” dia.
5 1/2”
3 15/16”
43 1/4”
Satin finish, grain size 240 complete with pivotable handrail
support, pivotable anchor base
E021330
H
Y
X
THE ROUND BARS COME
PRESSURE BLOCKED
BETWEEN TWO STEEL PLATE
TO BE COMBINED WITH
SCREW FLANGE E016,
FLANGE CANOPY E0192 AND
SCREW E032
ARTEFERRO
Reproduction Prohibited
• Double Plates Newel Posts
AISI 316
ARTEFERRO
by
245
3
AISI 316
Tube
Tube
35
35
/32
”
/32
35
/32
”
AISI 316
”
• Profile System
AISI 316 AISI 304
”
2
5/3
Tube
E1100424
E1000424
1 2/3” dia. x 1/16” x 19’ - 8”
E1500100
1 2/3” dia. x 1/16”
E1400100
1 2/3” dia. x 1/16”
E1100483
E1000483
1 7/8” dia. x 5/64” x 19’ - 8”
E1500110
1 7/8” dia. x 5/64”
E1400110
1 7/8” dia. x 5/64”
2”
9/3
1 12/3”
21
AISI 316
Profile
AISI 316
E1100000
1” x 1” x 1/16” x 9’ -10”
Tube
AISI 316
Tube
E1300100
1 2/3” dia. x 1/16”
E1200100
1 2/3” dia. x 1/16”
E1300110
1 7/8” dia. x 5/64”
E1200110
1 7/8” dia. x 5/64”
1 11/32”
Also available in
groups of 19’ 8”
Rubber
Tube
Glass
Coil length
AISI 316
E1999100
1 2/3” dia.
5/16” - 7/16”
100’
E1100100
1 2/3” dia. x 1/16”
E1999200
1 2/3” dia.
1/2” - 5/8”
100’
E1100110
1 7/8” dia. x 5/64”
E1999300
1 2/3” dia.
5/8” - 11/16”
100’
E1999400
1 7/8” dia.
5/16” - 33/64”
100’
E1999500
1 7/8” dia.
9/16” - 11/16”
100’
E1999650
1 7/8” dia.
11/16” - 7/8”
100’
Tube
ARTEFERRO
Reproduction Prohibited
by
247
ARTEFERRO
248
by
Reproduction Prohibited
GLASS U
revolutionary system
for glass railing
Certification an tested report available at
www.arteferroINOX.com
tested and certified AT 200 Kg/ml
Floor Fixing Channel End Accessories
10”
9’ -
ALUMINIUM
E1600100
ALUMINIUM
Description
ALUMINIUM
Art. no.
E1600500
Aluminium support for floor ancorage
ALUMINIUM
Art. no.
E1600600
Art. no.
E1600700
Wall Fixing Channel End Accessories
10”
10”
9’ -
9’ -
ALUMINIUM
Description
ALUMINIUM
E1700200
Aluminium support for wall E1700300
ancorage
ALUMINIUM
Description
Art. no.
ALUMINIUM
E1700500
Carter to cover the
holes of E1700200
Art. no.
ALUMINIUM
E1700600
Art. no.
E1700700
10”
9’ -
Rubber
Rubber
Description
Glass thickness
E1999800
Gaskets for art. E1600100 and E1700200
5/16” and
7/16”
E1999810
Gaskets for art. E1600100 and E1700200
13/16” and
7/8”
Description
E1999830
Fixing wedge made of
synthetic material
INSERT the glass in the
closing device and lay
everything in the
aluminium profile
ARTEFERRO
Move the glass on one
side and INSERT wedges in
the opposite side of the
glass
Rubber
Description
Glass thickness
E1999850
Closing Gaskets
5/16” and 7/16”
E1999860
Closing Gaskets
13/16”and 7/8”
AFfix the glass BY putting
wedges in the other side of the
glass applying a slight pressURE
249
7
Y
M6
7
• Rope System
2 33/64”
AISI 316
Rope
EF7X704
5/32” dia.
9,00 kN
EF7X705
13/64” dia.
14,00 kN
EF7X706
15/64” dia.
20,00 kN
AISI 316
Min. Brake load
Rope
Y
left
right
ETM05SX
ETM05DX
13/64” dia.
2 23/64”
ETM06SX
ETM06DX
15/64” dia.
2 3/4”
AISI 316
Description
ET06
Domed head nut right hand
thread M6
19
5/8”
5/32”
7
AISI 316
Rope
Min. Brake load
AISI 303 AISI 316
ED05
EF7X1904
5/32” dia. / 4mm
8,50 kN
EF7X1905
13/64” dia. / 5mm
14,00 kN
EF7X1906
15/64” dia. / 6mm
20,00 kN
ED05316
Description
AISI 316
Description
Adjustable ropes with
2 M6 thread
ED06
Domed head nut right hand
thread M6
ED06SX
Domed head nut left hand
thread M6
Y
2 3/64”
M6
2 3/8”
M6
AISI 316
AISI 316
Description
ED07
Rounded head screw M6
thread right
Y
left
ETF05DX
ETF05SX
13/64” dia.
2 23/64”
ETF06DX
ETF06SX
15/64” dia.
2 3/4”
ØA
X
Rope
right
AISI 303
Rope
EA05
13/64” - 15/64” dia.
X
A
15/32” dia.
M10 25/32” dia.
AISI 303 AISI 316
For tube
Hole
EB061
EB061316
1 2/3” dia.
17/64”
dia.
EB063
EB063316
Flat face
17/64”
dia.
ARTEFERRO
250
by
Reproduction Prohibited
AISI 316
Description
ETFM06DX Right hand thread
ETFM06SX
Left hand thread
• Rope System
ARTEFERRO
1 11/32”
1 11/32”
7/8” dia.
B
11/32” dia.
A
C
B
B
AISI 316
Rope
ETTB05
13/64”
dia.
ETTB06
15/64”
dia.
A
B
C
1 9/16”
1/2”
5/16”
1 3/4”
9/16”
11/32”
AISI 303
For tube
Rope B
AISI 303
For tube
Hole B
EST041DX
1 2/3” dia.
5/32”-13/64”-15/64” dia.
ESF051
1 2/3” dia.
7/32”
dia.
13/64” dia.
EST041SX
1 2/3” dia.
5/32”-13/64”-15/64” dia.
ESF061
1 2/3” dia.
17/64” dia.
15/64” dia.
Rope
EXAMPLE OF APPLICATION
ED06
ETM05DX
ETM05DX
ETF05DX
E0124
EST04DX
ETM05DX
ETM05SX
ET06
ETM05DX
ETM04DX
ED07
ED05
ESF04
EA05
EA05
EB071
ETM05DX
ED06
ETM04SX
ED06
ETFM06DX
ED06
ETMT06DX or ETMS06DX
ETFT05 or ETFS05
ETTB05
EST04SX
ETFF04
ETFF05
ETFT05
ED06SX
Reproduction Prohibited
by
251
2 31/64”
A
• Rope System
B
AISI 316
2 31/64”
1 29/64”
Rope
A
B
1 7/8”
ETFF05
13/64”
dia. 2 7/8”
ETFF06
15/64”
dia. 3 15/32” 2 61/64”
AISI 316
1 29/64”
Description
ETMT06DX Right hand thread
AISI 316
Rope
ETFT05
13/64”
dia.
ETMT06SX Left hand thread
2 13/16”
2 3/4”
A
2”
1 57/64”
AISI 304
Description
ETMS06DX Right hand thread
ETMS06SX
AISI 304
Rope
ETFS06
15/64”
dia.
AISI 316
Rope
ETSM10
13/64”
Thread
dia. M6-M10 4 11/64”
Left hand thread
How to Construct Article Numbers: ETSM8, ETSM10 e ETSM12:Use of the Crimping Tool is Not Necessary
Insert the cable on thE inside of
the point of article: ETSM8
Unroll hte cable and insert the nose of the
central part of the cable
Roll around to form one piece and
insert cable on the inside of the point
of article: ETSM8
Screw in the final part of article:
ETSM8
Block with the enclosed nut
ETSM8
ETSM8
252
by
ETSM8
ETSM8
ETSM8
ETSM8
Reproduction Prohibited
A
Raw finish, unpainted
E690/G
Color: Wengè
Color: Beech
Wood
Description
Wooden handrail 6’5” ft long
Description
Wood
a large, straight tree of Central and West
Africa, valued for its hard dark wood
Description
E690
Wooden handrail 6’5” ft long
E692
Wooden handrail 6’5” ft long
E690/3000/G Wooden handrail 10 ft long
E690/3000
Wooden handrail 10 ft long
E692/3000
Wooden handrail 10 ft long
AISI 304
Description
AISI 304
Description
AISI 304
Description
E603
Wooden handrail
connector 1 3/4” dia.
E602
“T” fitting wooden handrail
1 3/4” dia.
E600
90° curved
AISI 304
Description
AISI 304
Description
AISI 304
Description
E601
90° angle
E604
Articulated angle
E605
Pivotable connector
1 3/8”
• Woodinox
Wood
1 3/4” dia.
1 3/4” dia.
1 3/4” dia.
1 9/64”
1 3/4”
9/16” dia.
.
2”
dia
1” dia.
AISI 304
Description
AISI 304
Description
AISI 304
Description
E4260
Rounded end terminal
E4265
Flat end terminal
E4586
Handrail support
1 9/16” dia. / 1 57/64” dia. and square
2 7/8”
Screw in nut + set screw M6 included with
handrail support E4586
ESM614
2 3/4” dia.
3 3/4”
1 3/4”
2 23/32”
EINSM6X12
AISI 304
Hole Diameter
AISI 304
Description
E6080
1 3/4” dia.
E0224
Handrail support
Reproduction Prohibited
by
253
Plastic
• Woodinox
E600/T
Description
Plastic supports for end caps and
fittings (screw included)
Aluminium
Description
E600/D
Drill-gauge for wooden handrails
Iron
E600/D1
Description
Drilling template for radial holes
in wooden handrails 1 3/4” dia.
ARTEFERRO
E600/D
E600/T
E4265
Take a look at the video on
www.indital.com
ARTEFERRO
254
by
Reproduction Prohibited
Hexagon socket countersunk flat head screw
UNI 5933 / DIN 7991
E0385316
E0385
Iron
I0385
Thread
M5 x 1”
E0322
M6 x 3/8”
E03851
M6 x 63/64”
E0321
M8 x 25/32”
E032
M10 x 1”
E0325
M5 x 25/64”
E036
M6 x 1 3/16”
Hexagon socket set screw UNI 5927 / DIN 914 / ISO 4027
AISI 304
Thread
E0351
M4 x 13/64”
E035
M5 x 13/64”
AISI 304
Hexagon socket set screw UNI 5923 / DIN 913 / ISO 4026
AISI 316
Thread
E0323
E0386316
M8 x 25/32”
E0330316
AISI 304
E0386
E0330
Iron
I0330
E0330/S
Cross recessed countersunk flat head screw
(for sheet) UNI 6555 / DIN 7982 / ISO 7050
AISI 316
E0383316
AISI 304
Thread
Thread
M8 x 1 3/16”
M10 x 1 3/16”
M5 x 1/4”
• Accessories
AISI 316 AISI 304
Hexagon socket head cap screw
UNI 5931 / DIN 912 /ISO 4762
Cross recessed countersunk
flat head screw (for wood) DIN 7505A
AISI 304
E0383
7/32” x 55/64”
E0382
E0384
1/4” x 55/64”
E0381
Iron
I0382
Thread
13/64” x 25/32”
15/64” x 25/32”
Stainless steel
Threaded inserts for riveting tool
AISI 304
1432/1
Dimensions
19 11/16” x 21 21/32”
AISI 304
Mandrels for riveting tool
Iron
E40591
E40592
E40593
Thread
M5
M6
M8
I40591
E40590M5
E40590M6
E40590M8
Thread
M5
M6
M8
Drilling template, patented for tubes dia. 1 1/3”- 1 2/3” - 1 7/8”
Tool for drilling radial holes dia. 9/32” - 11/32” - 7/16”
For threaded inserts and holes of M5 - M6 - M8 threadings
Stainless steel and wood
Art. no.
E40580
Stainless steel
Plastic box containing tool, with M5, M6, M8 mandrels and
heads. Riveting tool for threaded inserts M5, M6, M8.
AISI 304
E/PAN13
Dimensions
19 11/16” x 21 21/32”
AISI 304
Iron
E/PAN14
I/PAN14
E40590
Dimensions
19 11/16” x 21 21/32”
Reproduction Prohibited
by
255
• Accessories
Degreaser spray
Spray for cleaning all metal surfaces to be glued.
Leaves a thin antistatic and water-repellent coat on the
treated metallic surfaces. It is recommended on finished
products.
E4051
E4052
De-rusting solution for stainless steel. It is a powerful
degreasing product to clean up the Iron traces from
the stainless steel surfaces. It cleans, protects and exalts
the pre-existing brightness.
Threadlocking
E4053
Passivating paste for stainless steel. Its purpose is to
create a protective oxide and chrome film on the
stainless steel surface.
High gluing adhesive
E4052/D
Product enough for approx 16’5”
Electric crimping tool
E4052/P
Product enough for approx 16’5”
Shearing tool for wire ropes till 5/16” dia.
E4054
Manual crimping tool; Hydraulic crimping tool for pressing
the terminal support for wire ropes
Generated power 50 kN
Portable oil-dynamic battery tool with pivotable
head for pressing wire ropes.
Kit composed by:
E40680
-basic tool with battery, wrist strap
and shoulder strap;
-spare battery;
-battery charger
E40690
E40685
Generated power 50 kN
How to treat oxidized stainless steel
Stainless steel is a lasting and reliable material. Nevertheless, it is necessary to treat it correctly in order to avoid its oxidization under specific circumstances. As a matter
of fact, stainless steel can oxidize in case of: storage near Iron elements, inadequate treatments during the assembling phase, use of the same tools used to work Iron
elements, urban pollution and dust, proximity of companies working in the metallurgic field.
In order to meet the needs of its customers, Ind.I.A. SpA created a line of specific items: the De-rusting (item E4052/D) and the Passivating (item E4052/P) products.
Such line includes some de-rusting items aimed at cleaning “polluted” stainless steel components as well as some passivating products in order to restore their protective
film. The combined use of such products allows the “renovation” even of surfaces that apparently seem compromised.
Example of a stainless steel picket polluted
by external agents like dust and smog
256
by
Application of the de-rusting product E4052/D: Application of the passivating product
all polluted parts must be covered
E4052/P: the polluted component must
entirely be covered
Reproduction Prohibited
Result of the application of Ind.I.A. SpA’s
de-rusting and passivating products
horizontal round bar system
E001/6000
E456
handrail anchorage
E0119
End Cap
90
E0069
E031/S1
Handrail Support
E0385
(Screw)
E0042
E0127
optional spherical
cap
tools
-E40580 Drilling template
-E40591 threaded inserts
-E40590 riveting tool
glues/sprays
-E4053 threadlocking
-E4054 high gluing adhesive
-E4051 degreaser spray
-E4052 finishing spray
E020
E020
E005 round bars
horizontal glass system
tools
-E40580 Drilling template
-E40690 Cable Cutter
-E40685 Manual Crimping tool
glues/sprays
-E4053 threadlocking
-E4054 high gluing adhesive
-E4051 degreaser spray
-E4052 finishing spray
258
by
Reproduction Prohibited
wall mount round bar rake system
E4483
wall
anchorage
E001
E030
E452
E0069
round bar
holder
E030
90
E0385
(Screw)
E001/6000
(1 2/3” tube)
E001/6000
(1 2/3” Tube)
tools
-E40580 Drilling template
-E40591 threaded inserts
-E40590 riveting tool
E0127
optional spherical
cap
glues/sprays
-E4053 threadlocking
-E4054 high gluing adhesive
-E4051 degreaser spray
-E4052 finishing spray
E0119
(end cap)
E005 round bars
E0119
(end cap)
E113
(lateral anchorage)
wall mount cable rake system
Reproduction Prohibited
by
259