Splitter, Multiplexer and OADM Active Form-Factor Cards

Transcription

Splitter, Multiplexer and OADM Active Form-Factor Cards
PORTFOLIO OVERVIEW
Splitter, Multiplexer
and OADM Active
Form-Factor Cards
OMS-7190 shelf with transponder and
mux-demux cards.
Features
• Low insertion loss
• High isolation
• Hardened -40 to +65º C operating
temperature
• Customizable with no additional lead
time or cost
• Quick and easy installation
Optelian’s product line includes highly
reliable DWDM, CWDM, and WDM
multiplexer and splitter cards. These are
supported in the active shelves and the
passive OMS-119 shelf.
Banded DWDM is available to reduce insertion losses
on add/drop applications. Optics can be either uni or
bidirectional. Many models include a legacy (1310 or
1550 nm) port for overlaying new channels on existing
circuits and a faceplate monitor port to aid installation
and testing.
Applications
• Increase network capacity
• Outside plant, customer premise and
central office
• Unidirectional or bidirectional
Designed in accordance with:
• NEBS Level 3
•GR-1221
•GR-63-CORE
Hardened Multiplexers in the 1 RU OMS-119 Shelf
While there are many standard models to choose from,
custom modules can be designed and delivered based
on specific customer requirements
LightFLEX
™
PORTFOLIO OVERVIEW
All Multiplexers and Splitters
Mechanical and Environmental Specifications
Specification
Value
Operating Temperature Range
-40°C to +65°C (-40ºF to 149ºF)
Storage Temperature
-40°C to +85°C (-40ºF to 185ºF)
Relative Humidity (non-condensing)
5% to 95%
Dimensions (H x W x D)
17.5 x 3.0 x 23.4 cm (6.9 x 1.2 x 9.2 in)
Optical Connectors
LC/PC
DC Power Supply
-48 V nominal
Power Dissipation
2W
Note: Circulators are not hardened; their operating temperature range is 0ºC to +70°C.
The cards noted in this document are packaged to fit within the OMS family of shelves. They are not designed to
fit within the CMS shelves. Optelian has additional solutions, not shown in this document, for placement in the
CMS shelves.
2
Multiplexer and Splitters
PORTFOLIO OVERVIEW
Splitters and Circulators
Splitter Specifications
Specification
Condition
Value
Operating Wavelength
SPD
SPP
1270 to 1350 and 1510 to 1590 nm
1260 to 1360 and 1480 to 1640 nm
Insertion Loss (End of Life)
50:50 (SPD)
90:10 (SPD)
1X4 (SPP)
1X8 (SPP)
3.5 dB to 4.0 dB
0.7/11.4 dB to 1.2/12.4 dB
7.7 dB to 8.1 dB
10.9 dB to 11.4 dB
Polarization Dependent Loss
All channels
0.3 dB (maximum)
Directivity
All channels
55 dB (minimum)
Optical Return Loss
All ports
55 dB with APC connectors (minimum)
45 dB, others (minimum)
Note: SPP models are used for FTTx applications. Insertion loss includes one connector.
COM
P1
*
*
Pn
COM
IN
CIRC
OUT
Circulator Specifications
Specification
Value
Operating Wavelength
1525 nm to 1565 nm
Insertion Loss
0.9 dB (maximum)
Polarization Dependant Loss
0.1 dB (maximum)
Polarization Mode Dispersion
0.06 ps (maximum)
Isolation
38 dB (minimum)
Return Loss
50 dB (minimum)
Directivity
50 dB (minimum)
Note: Circulators are not hardened; their operating temperature range is 0ºC to +70°C. Insertion loss includes one connector.
3
Multiplexer and Splitters
PORTFOLIO OVERVIEW
SPD-9010
P1- COM-A
P2- MON-A
P3- 90%-A
P4- 10%-A
P5- COM-B
P6- MON-B
P7- 90%-B
P8- 10%-B
SPP-108
P1- COM
P1- MON
P1- OUT 1
P1- OUT 2
P1- OUT 3
P1
P2
P1
P2
P3
P4
P3
P4
P5
P6
P5
P6
P7
P8
P7
P8
P6 - OUT 4
P7 - OUT 5
P8 - OUT 6
P9 - OUT 7
P10 - OUT 8
MDX-CIRC
P1 IN A
P4 IN B
P2 COM A P5 COM B
P3 MON A P6 OUT B
P9
P10
Ordering Information
Model Number
Part Number
Description
SPD-9010
1010-7500
90:10 Splitter, 2 circuits, 1% bidirectonial monitor, 1-wide, LC
SPD-102
1011-4000
50:50 Splitter, 2 circuits, LC
SPP-104
1011-4100
1x4 Splitter, 2 circuits, LC
SPP-108
1010-7600
1x8 Splitter, 1 circuit, LC
MDX-CIRC
1006-9800
Circulator (1550) 2 circuits, LC
4
Multiplexer and Splitters
PORTFOLIO OVERVIEW
WDM Multiplexer/Demultiplexer
WDM Common Optical Specifications
Specification
Condition
Value
1310 Wavelength Range
-
1260 nm to 1360 nm
1550 Wavelength Range
-
1460 nm to 1620 nm
Polarization Dependent Loss
All channels
0.2 dB (maximum)
Insertion Loss (End of Life)
All channels
1.0 dB (maximum)
Channel Isolation
1550 nm on 1310 port
1310 nm on 1550 port
45 dB (minimum)
45 dB (minimum)
Optical Return Loss
All ports
45 dB (minimum)
Note: Insertion loss includes one connector.
Dual WDM
COM (P1)
1310/1550
COM (P4)
1310/1550
1310 (P2)
1550 (P3)
1310 (P5)
1550 (P6)
Note: These modules contain two separate WDM devices.
Ordering Information
Model Number
Part Number
Description
MDX-020
1007-7500
Dual WDM (1310, 1550), 2 circuits, LC/PC
5
Multiplexer and Splitters
PORTFOLIO OVERVIEW
CWDM
CWDM Common Optical Specifications
1
Specification
Value
Operating Wavelength
1260 nm to 1620 nm
CWDM Channel Passband Width
ITU ± 6.5nm
1310 nm Channel Passband Width
1260 nm to 1360 nm
1550 nm Channel Passband Width
1520 nm to 1600 nm
Passband ripple)
0.31 dB (maximum)
Adjacent and 1310 Channel Isolation
40 dB (minimum)
Non-Adjacent and 1310 Channel Isolation
40 dB (minimum)
Polarization Dependant Loss
0.25 dB (maximum)
Return Loss
35 dB (minimum)
Directivity
50 dB (minimum)
Passband ripple of 1371 nm port = 0.5 dB, because of the Water Peak Effect.
CWDM modules are available in many configurations to fit a wide variety of applications.
6
Multiplexer and Splitters
PORTFOLIO OVERVIEW
CWDM Multiplexer/Demultiplexer with Legacy 1310
or 1550 nm Wavelength
Multiplexer/Demultiplexer units can be used in either unidirectional or bidirectional applications. With Mux/
Demux pairs, the insertion losses are complementary on the deumux unit to extend the system’s reach.
The 9-channel mux/demux pair is useful for hybrid CWDM/DWDM applications.
1310 nm
P1
COM
*
MON
*
Pn
CWDM Bidirectional Mux/Demux
Ordering Information - Bidirectional Mux/Demux
Model Number
Part Number
Description
MDX-4C1
1004-8100
4 channel CWDM (1271, 1291, 1311, 1331) +1550, 1 circuit, 2.5% bidirectional monitor,
LC/PC
MDX-4C2
1004-8105
4 channel CWDM (1351, 1371, 1391, 1411) +1550, 1 circuit, 2.5% bidirectional monitor,
LC/PC
MDX-4C4
1004-8115
4 channel CWDM (1471, 1491, 1511, 1531) +1310, 1 circuit, 2.5% bidirectional monitor,
LC/PC
MDX-4C5
1004-8120
4 channel CWDM (1551, 1571, 1591, 1611) +1310, 1 circuit, 2.5% bidirectional monitor,
LC/PC
MDX-8C1
1004-8000
8 channel CWDM (1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411) +1550, 1 circuit,
2.5% bidirectional monitor, LC/PC
MDX-8C4
1004-8011
8 channel CWDM (1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611) +1310, 1 circuit,
2.5% bidirectional monitor, LC/PC
Ordering Information - Mux, Demux Pairs
Model Number
Part Number
Description
MUX-8C4
1006-8900
8 channel CWDM (1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611) +1310, 1 circuit,
2% uni-directional monitor, LC/PC
DMX-8C4
1006-9000
8 channel CWDM (1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611) +1310, 1 circuit,
2% uni-directional monitor, LC/PC
MUX-9C6
1005-9025
9 channel CWDM (1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611) + 1310,
1-circuit, LC/PC
DMX-9C6
1005-8925
9 channel CWDM (1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611) + 1310,
1-circuit, LC/PC
7
Multiplexer and Splitters
PORTFOLIO OVERVIEW
CWDM Bidirectional Mux/Demux Maximum End of Life Insertion Loss Specifications
Channel/Model
MDX-8C4
MDX-4Cx
MDX-8C11
MDX-4C21
Monitor
19.0
20.0
20.0
1310 or 1550 nm
1.4
1.4
1.4
λ1
1.8
1.8
1.8
λ2
2.1
2.1
2.4
λ3
2.5
2.5
2.8
λ4
2.8
2.8
2.8
λ5
3.2
3.2
-
λ6
3.6
3.8
-
λ7
3.9
4.2
-
λ8
4.3
4.3
-
Note: Insertion loss includes one connector.
1
These units have a higher insertion loss on wavelengths 1371 and 1391 due to the Water Peak Effect.
CWDM Mux, Demux Pairs Maximum End of Life Insertion Loss Specifications
Channel/Model
MUX-8C4
DMX-8C4
MUX-9C6
DMX-9C6
Monitor
20.0
20.0
-
-
1310 nm
1.4
1.4
0.9
0.9
1451 nm
-
-
1.3
4.2
1471 nm
1.5
4.0
1.7
3.9
1491 nm
1.8
3.7
2.0
3.5
1511 nm
2.2
3.3
2.4
3.1
1531 nm
2.6
2.9
2.8
2.8
1551 nm
2.9
2.6
3.1
2.4
1571 nm
3.3
2.2
3.5
2.0
1591 nm
3.7
1.8
3.9
1.7
1611 nm
4.0
1.5
4.2
1.3
Note: Insertion loss includes one connector.
8
Multiplexer and Splitters
PORTFOLIO OVERVIEW
DWDM
DWDM Common Specifications
Specification
Value
Operating Wavelength
1510 nm to 1590 nm
Channel Passband Width
ITU ± 0.2 nm
Channel Spacing
100 GHz
Thermal Wavelength Stability
3.0 pm/ºC (maximum)
Non-Adjacent channel isolation (Add/Drop)
40 dB (minimum)
Passband ripple (flatness)
± 0.4 dB (maximum)
Polarization Dependant Loss
0.25 dB (maximum)
Return Loss
45 dB (minimum)
9
Multiplexer and Splitters
PORTFOLIO OVERVIEW
DWDM Multiplexer/Demultiplexer
Multiplexer/Demultiplexer units can be used in either unidirectional or bidirectional applications. With Mux/
Demux pairs, the insertion losses are complementary on the demux unit to extend the system’s reach.
P1
COM
*
MON
*
Pn
MUX-8D1A
Ordering Information - Bidirectional Mux, Demux Pairs
Model Number
Part Number
Description
MUX-8D1A
1006-4900
8 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1533.47, 1534.25, 1535.04, 1535.82), 1 circuit, 2% monitor, LC
DMX-8D1A
1006-4800
8 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1533.47, 1534.25, 1535.04, 1535.82), 1 circuit, 2% monitor, LC
MUX-8D6A
1007-6900
8 channel DWDM (1554.94, 1553.33, 1552.52, 1542.94,
1542.14, 1541.35, 1540.56, 1539.77), 1 circuit, 2% monitor, LC
DMX-8D6A
1007-6700
8 channel DWDM (1554.94, 1553.33, 1552.52, 1542.94,
1542.14, 1541.35, 1540.56, 1539.77), 1 circuit, 2% monitor, LC
MUX-8D7A
1011-5900
8 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1547.72, 1549.32, 1550.92, 1552.52) 1 circuit, 2% monitor, LC
DMX-8D7A
1011-6000
8 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1547.72, 1549.32, 1550.92, 1552.52) 1 circuit, 2% monitor, LC
MUX-9D1A
1007-1800
9 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1533.47, 1534.25, 1535.04, 1535.82, 1536.61) for Hybrid
DWDM/CWDM Applications, 1 circuit, 2% monitor, LC
DMX-9D1A
1007-1900
9 channel DWDM (1530.33, 1531.12, 1531.90, 1532.68,
1533.47, 1534.25, 1535.04, 1535.82, 1536.61) for Hybrid
DWDM/CWDM Applications, 1 circuit, 2% monitor, LC
10
MON
P1
P2
P3
P4
P5
P6
P7
P8
COM
Multiplexer and Splitters
PORTFOLIO OVERVIEW
DWDM Maximum End of Life Insertion Loss Specifications
Channel/Model
MUX-8DxA
MUX-9D1A
DMX-8DxA
DMX-9D1A
Monitor
19.0
19.0
19.0
λ1
1.4
4.9
5.3
λ2
2.0
4.4
4.9
λ3
2.4
3.9
4.4
λ4
2.9
3.4
3.9
λ5
3.4
2.9
3.4
λ6
3.9
2.4
2.9
λ7
4.4
2.0
2.4
λ8
4.9
1.4
2.0
λ9
5.3
-
1.4
Note: Insertion loss includes one connector.
11
Multiplexer and Splitters
PORTFOLIO OVERVIEW
DWDM Multiplexer With Express/Expansion Port (ODM)
This multiplexer can be used for point to point bookended applications between one location and two or more
different locations or it can be used to start small and grow incrementally as business expands. The multiplexer
can be used in unidirectional or bidirectional applications.
Unidirectional
λ1, 2, 3, 4,
5, 6, 7, 8
λ1
to
λ8
λ3, 4,
5, 6,7,8
λ4,
5,6,7,8
λ1 λ2
λ4
to
λ8
λ3
λ1
λ4
to
to
λ8
λ1 λ2
λ8
λ3
Bidirectional
λ1, 2, 3, 4,
5, 6, 7, 8
λ1
to
λ8
λ3, 4,
5, 6, 7, 8
λ5, 6, 7, 8
to
λ8
λ3 λ4
λ1 λ2
λ5
Start with 8 wavelengths
λ1 to λ8
λ1 to λ8
Expand to 16 wavelengths
λ9 to λ16
λ1 to λ8
λ1 to λ8
λ9 to λ16
MUX
COM-W
DMX
Band Filter
Express/
Expansion
MON
λ1
12
COM-E
*
*
λn
COM-W
COM-E
Band Filter
Express/
Expansion
MON
λn
*
*
λ1
Multiplexer and Splitters
PORTFOLIO OVERVIEW
Model Number
Part Number
Description
ODM-1D1
1006-1300
1-channel DWDM MUX with Express (1561.42), 2 circuits, 2% unidirectional monitor, LC
ODM-1D2
1007-0300
1-channel DWDM MUX with Express (1530.33), 2 circuits, 2% unidirectional monitor, LC
ODM-1D3
1007-0310
1-channel DWDM MUX with Express (1531.12), 2 circuits, 2% unidirectional monitor, LC
MUX-8D1
1005-9000
8-channel DWDM MUX with Express (1530.33, 1531.12, 1531.90, 1532.68, 1533.47, 1534.25,
1535.04, 1535.82), 1 circuit, 2% unidirectional monitor, LC
DMX-8D1
1005-8900
8-channel DWDM DMX with Express (1530.33, 1531.12, 1531.90, 1532.68, 1533.47, 1534.25,
1535.04, 1535.82), 1 circuit, 2% unidirectional monitor, LC
MUX-8D2
1005-9005
8-channel DWDM MUX with Express (1536.61, 1537.40, 1538.19, 1538.98, 1539.77, 1540.66,
1541.35, 1542.14), 1 circuit, 2% unidir monitor, LC
DMX-8D2
1005-8905
8-channel DWDM DMX with Express (1536.61, 1537.40, 1538.19, 1538.98, 1539.77, 1540.66,
1541.35, 1542.14), 1 circuit, 2% unidirectional monitor, LC
MUX-8D3
1005-9010
8-channel DWDM MUX with Express (1542.94, 1543.73, 1544.53, 1545.32, 1546.12, 1546.92,
1547.72, 1548.52), 1 circuit, 2% unidirectional monitor, LC
DMX-8D3
1005-8910
8-channel DWDM DMX with Express (1542.94, 1543.73, 1544.53, 1545.32, 1546.12, 1546.92,
1547.72, 1548.52), 1 circuit, 2% unidirectional monitor, LC
MUX-8D4
1005-9015
8-channel DWDM MUX with Express (1549.32, 1550.12, 1550.92, 1551.72, 1552.52, 1553.33,
1554.13, 1554.94), 1 circuit, 2% unidirectional monitor, LC
DMX-8D4
1005-8915
8-channel DWDM DMX with Express (1549.32, 1550.12, 1550.92, 1551.72, 1552.52, 1553.33,
1554.13, 1554.94), 1 circuit, 2% unidirectional monitor, LC
MUX-8D5
1005-9020
8-channel DWDM MUX with Express (1555.75, 1556.56, 1557.36, 1558.17, 1558.98, 1559.79,
1560.61, 1561.42), 1 circuit, 2% unidirectional monitor, LC
DMX-8D5
1005-8920
8-channel DWDM DMX with Express (1555.75, 1556.56, 1557.36, 1558.17, 1558.98, 1559.79,
1560.61, 1561.42), 1 circuit, 2% unidirectional monitor, LC
© OPTELIAN. ALL RIGHTS RESERVED | OPTELIAN-MULTIPLEXERSANDSPLITTERS-DS-0215
Ordering Information
DWDM Multiplexer with Express Maximum End of Life Insertion Loss Specs
Channel/Model
ODM-1Dx
MUX-8Dx
DMX-8Dx
Monitor
19.0
19.0
19.0
Express
1.0
1.3
1.3
λ1
1.4
2.7
6.1
λ2
-
3.2
5.6
λ3
-
3.6
5.1
λ4
-
4.2
4.6
λ5
-
4.6
4.2
λ6
-
5.1
3.6
λ7
-
5.6
3.2
λ8
-
6.1
2.7
Note: Insertion loss includes one UPC connector.
UNITED STATES
CANADA
1700 Enterprise Way, SE, Ste. 101
Marietta, GA 30067-9219
T: +1 877 225 9428
T: +1 770 690 9575
1 Brewer Hunt Way
Ottawa, Ontario K2K 2B5
T: +1 613 287 2000
[email protected]
™
optelian.com

Similar documents