Prefabricated Posts - Industrial Metal Supply

Prefabricated Posts
Pre-assembled posts that come with your choice of
mounting condition: floor- or fascia-mount!
Prefabricated Posts for Crossbars
Pre-assembled for .47"-diameter crossbars, these posts will save valuable time
at the construction site. Choose either floor or fascia mounting condition.
Comes with pre-installed adjustable saddle to accommodate stairs.
Corrosion-resistant 316 Stainless Steel adds beauty to any environment.
Part Number
Description
49-B424/36/F/MD/BS
36"-high Floor-mount Prefabricated Post for .47"
Crossbars with Flange and Adjustable Saddle
49-B424/36/W/MD/BS
36"-high Fascia-mount Prefabricated Post for .47"
Crossbars with Flange and Adjustable Saddle
Adjustable Saddle!
Project above shown
using Crossbar Posts with
crossbar holders, crossbar rods
and 1.67" satin tubing with flush
end caps (see back for item numbers).
Undrilled Posts
These undrilled posts allow you to completely customize your railing
project. Add glass clips to support glass panels, perpendicular collars
to attach tubing or drill to accommodate cable. Choose either floor
or fascia mounting condition.
Part Number
Description
49-U424/38/F/BL
36" Floor-mount Undrilled Post w/flange (no canopy)
49-U424/44/W/BL
42" Fascia-mount Undrilled Post
Glass Grips
Flush Elbow
Perpendicular Collar
Project above shown using Undrilled Posts
with radius glass grips, adjustable saddle,
tubing with half-ball end cap and flange
canopy (see back for item numbers).
6 Locations to Serve You:
LOS ANGELES
8300 San Fernando Rd.
(818) 729-3333
SAN DIEGO
7550 Ronson Road
(858) 277-8200
PHOENIX
5150 S. 48th Street
(602) 454-1500
IRVINE
2481 Alton Parkway
(949) 250-3343
RIVERSIDE
301 Main Street
(951) 300-9900
TUCSON
3757 E Columbia Street
(520) 441-5900
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
Order
Quantity
Part Number
Description
A
B
C
D
Prefabricated Posts
Easy, Ready-made, Pre-assembled Posts
A
49-B424/36/F/MD/AS
B
49-B424/36/W/MD/AS
C
49-U424/38/F/BL
D
49-U424/44/W/BL
36"-high floor-mount prefabricated post for .47" crossbars
with flange and ball adjustable saddle. 1.67" diameter tubing.
36"-high fascia-mount prefabricated post for .47" crossbars
and ball adjustable saddle. 1.67" diameter tubing.
Undrilled 38"-high floor-mount post, the foundation for
custom railing projects. 1.67" diameter tubing.
Undrilled 44" fascia-mount post, the foundation for custom railing projects.
1.67" diameter tubing.
Tubing
Flange Channel Tube
Canopy
Fittings
Glass Grips
Connectors
End Caps
Crossbar Fittings
Modular, Do-It-Yourself Components
49-RH101/424
Center Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.
49-RH102R/424
Right End Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.
49-RH102L/424
Left End Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.
49-RCF101
Ball Finial finishes the look of .47"-diameter crossbar rods.
49-602/424
Half Ball End Cap for 1.67"-diameter tubing. Finishes railing with a clean rounded look.
49-600PF/424
Flat Knurled End Cap for 1.67"-diameter tubing. Knurled edging connects securely without
adhesive.
49-818/424
Perpendicular Collar, 1.67" x .08" connects tubing to tubing.
49-732/424
Flush Elbow, 1.67" x 0.08" connects tubing at a 90° angle.
49-732A/424
Adjustable Flush Elbow, 1.67" x .08" connects tubing at any angle.
49-734/424
Flush Tee, 1.67" X 0.08" connects three pieces of tubing.
49-821/424
Adjustable Ball Saddle, 1.67" attaches handrail to posts.
49-852R/424
Radius Glass Grip for 1/2" Glass for 1.67" tubing. Use with rubber insert 85-GGI1015
85-GGI1015
Rubber Insert for 1/2" Glass: use with Radius Glass Clip 49-852R/424
49-850R/424
Radius Glass Grip for 1/4"–3/8" Glass for 1.67" tubing.
85-GGI1007
Rubber Insert for 1/4" Glass: use with Radius Glass Clip 49-850R/424
85-GGI1008
Rubber Insert for 1/2" Glass: use with Radius Glass Clip 49-850R/424
49-860S/424
Square Glass Grip, For 1/2" Glass for 1.67" tubing.
85-GGI1006
Radius Insert for 1/2" Glass: use with Square Glass Grip 49-860S/424
49-850S/424
Square Glass Grip, For 1/4 - 3/8" Glass for 1.67" tubing.
85-GGI1003
Insert for 1/4" Glass. Use with 49-850S/424
85-GGI1004
Insert for 3/8" Glass. Use with 49-850S/424
49-846E/424
49-846C/424
Round Glass Grip for 1/2" glass. Made for 1.67"-diameter tubing. End position. Use with
rubber insert 85-GGI1002.
Round Glass Grip for 1/2" glass. Made for 1.67"-diameter tubing. Center position. Use with
rubber insert 85-GGI1002.
85-GGI1002
Rubber Insert for 1/2" Glass: use with 49-846E/424 and 49-846C/424.
49-732UV/424
90° Vertical Elbow Channel, 1.67" x.059".
49-732UH/424
90° Horizontal Elbow Channel, 1.67" x.059".
49-640/424
End Cap for Channel Tubing, 1.67" x.059"
49-540/424
Flange Canopy for 1.67"-diameter tubing. Perfect for finishing Undrilled Floor-mount Posts
(item #49-U424/38/F/BL).
49-A114/20
1.67"-diameter tubing in satin 316 stainless steel. 1.67" x.08" x 20'.
49-R038/20
Crossbar Rod: .47" in diameter, solid satin-finish 316. 20".
49-A114U/16
Channel Tubing: 1.67" x .06" x 16'.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor