9 - CST Hardscapes

®
Product
Look
Features/Functions
Coverage
Enhances original colors.
Wet Look
(water based) Forms a long lasting
protective film.
Protects against oil & dirt. Film
WL4 Protective Sealant
Wet Look
(solvent based) forming.
1 Gallon 1 Gallon covers up to
5 Gallons 150 sq. ft.
Protects against oil & dirt. Film
forming
1 Gallon 1 Gallon covers up to
5 Gallons 175 sq. ft.
Film forming. Bonds Sand inn
place within pavement joints.
1 Gallon 1 Gallon covers up to
5 Gallons 140 sq. ft.
WL4 Protective Sealant
EV-Protective Sealant
JS-Stabilizing Sealant
for Pavers and Joints
Natural Look
Satin Finish
(water based)
Satin Finish
(water based)
Non-film forming. Soaks into the
Invisible
(water based) material, won’t make
slippery.
Non-skid finish ideal for pool
Wet Look
WLP-Penetrating
Mat Finish decks. Non-film forming.
Sealant
(solvent based)
Non-film forming. Repels water
WR-7 Water Repellant
Invisible
&
dirt. Protects against salt &
(water based)
frost.
Dislodges efflorescence and
EC-Efflorescence
ground-in dirt. Prepares for
Cleaner
sealant.
Dislodges efflorescence and
HC-Multi-surface
ground-in
dirt. Prepares for
Hardscape cleaner
sealant.
Dissolves, dislodges and encapsuDG-Dirt & Grease
lates grease.
Cleaner
Effectively removes stains caused
RR-Rust Remover
by metal, rusted water, fertilizer,
etc.
Removes sealant, paint, tar or bituPTR-Paint, Tar &
men, rubber and chewing gum.
Rubber Remover
IN-Penetrating Sealant
RG-Concrete Adhesive
HP-Concrete Adhesive
(urethane)
© CST 11/09
Sizes
RG+ Polymeric Sand
Granite Grey
or Tan
HP Polymeric Sand
Granite Grey
or Tan
Elastomeric resin-based
compound. Remains flexible.
High Performance. Cures quickly.
Ideal for heavy traffic areas.
Environmentally friendly.
Applied dry-Hardens after being
misted. Inhibits weed growth.
Strengthens interlocking &
stabilizes.
High Performance. Ideal for highly exposed surfaces such as pool
decks, sloped driveways, public
ways, etc.
9
Section 1
CST’s full complementary line of Techni-Seal Products. You have chosen CST MON-CAST One-Piece
Pavers for their long-lasting beauty. However, this high quality material is not impervious to oil and
other substances. To preserve your pavers’ original appearance, it is therefore important to clean and
protect them in the correct way. Techni-Seal’s line includes all the essential products for cleaning,
protecting and maintaining your pavers.
5 Gallons 1 Gallon covers up to
175 sq. ft.
1 Gallon 1 Gallon covers up to
5 Gallons 120 sq. ft. for mandatory
2 coat application.
1 Gallon 1 Gallon covers up to
5 Gallons 120 sq. ft. for mandatory
2 coat application.
1
Gallon covers up to
1 Gallon
150
sq. ft.
5 Gallons
1 Gallon 1 Gallon of concentrated
5 Gallons product cleans 200 sq.ft
1 Gallon 1 Gallon of concentrated
5 Gallons product cleans 800 sq.ft
1 Quart
1 Quart
1 Quart
29 oz.
tube
10 oz.
50 Lbs.
50 Lbs. Covers 60-75
sq. ft. with narrow joints,
or 25-40 sq. ft. with wide
joints.
66 Lbs.
66 Lbs. Covers 80-100
sq. ft. with narrow joints,
or 30-55 sq. ft. with wide
joints.
www.techni-seal.com
Paver Pattern Designs
All paver sizes are nominal and should be
pre-measured when doing a job where
exact dimensions are critical.
Running Bond
K-Pattern
Single Basketweave
Double Basketweave
Herringbone
1-to-1 Herringbone
Modified Herringbone
1-to-1 Herringbone
Pg. 16
3(6x9) to 1(6x6)
1-to-1-to-1 Herringbone
Pg. 12
1(6x9) to 1(6x6)
3-to-1 Running Bond
Pg. 14
1(6x9), 1(6x6)
1(6x3)
1-to-1-to-1 Herringbone
Pg. 13
2(6x9) to 1(6x6)
4-Size Random Herringbone
Pg. 15
1(6x9), 1(6x6)
1(6x4.5), 1(6x3)
Pg. 16
3(6x9) to 1(6x6)
Mod. Herringbone
3-Size Running Bond
Pg. 14
1(6x9), 1(6x6)
1(6x4.5)
Pg. 14
1(6x9), 1(6x4.5)
1(6x3)
Pg. 14
1(6x6), 1(6x4.5)
1(6x3)
Roman Cobble Patterns Using 9” x 9”
9”x 9” 1 -to- 1
Pg. 12
1(9x9), 1(6x6)
© CST 11/09
3-Size Herringbone
9”x 9” 2 -to- 1
Pg. 13
1(9x9), 2(6x9)
Pg. 14
1(9x9), 1(6x9)
1(6x6
10
Pg. 12
1(6x3) to 1(6x4.5)
5-Size Random
Herringbone
Pg. 15
1(9x9), 1(6x9)
1(6x6), 1(6x4.5),
1(6x3)
Paver Pattern Designs
Vienna Classic™ Patterns
Vienna Classic
5-Size Random
Vienna Classic Sm.
3-Size Ran. Herringbone
Pg. 17
Vienna Classic Lg.
2-to1 Herringbone
Pg. 19
Section 2
Pg. 18
RidgeStone™ Patterns Using 3 smaller sizes
RidgeStone™
1-to-1 Herringbone
RidgeStone™
2-to-1 Herringbone
Pg. 12
1(9x9) to 1(12x12)
Pg. 13
2(9x12) to 1(12x12)
RidgeStone™
2-to-1 Lg. Herringbone
RidgeStone™
3-Size Herringbone
Pg. 14
(9x9), (9x12),
(12x12)
Pg. 13
2(9x12) to 1(9x9)
RidgeStone™ Patterns Using 12” x 15”
RidgeStone™
2-to-1 Modified Herr.
RidgeStone™
3-Size Herringbone
Pg. 13
2(12x15) to 1(12x12)
RidgeStone™
1-to1-to-1 Running Bond
Pg. 16
1(12x15) to 1(12x12)
1(9x12)
RidgeStone™
3-to-1-to-1 Run. Bond
Pg. 14
1(9x9), 1(9x12),
1(12x15)
RidgeStone™
4-Size Herringbone
Pg. 15
1(9x9), 1(9x12),
1(12x12), 1(12x15)
Pg. 16
3(9x9), 1(12x12),
1(12x15)
Fishscales™ Kit
RC Circle Kit
Pg. 20
Pg. 21
1 Kit
2nd Kit + 3 bands 6x4.5”
© CST 11/09
11
Paver Pattern Calculations
1-to1 Herringbone Patterns
Munich
Vienna Series
Contempra
Roman Cobble
6”x 6”=40%
6”x 9”=60%
Roman Cobble
6”x 3” =40%
6”x 4.5”=60%
Munich
Contempra
Roman Cobble
9”x 9”=69%
6”x 6”=31%
RidgeStone™
9”x 9” =36%
12”x 12” =64%
I. TOTAL AREA (square footage)
II. TOTAL BORDER (lineal footage)
a) CONVERT Ln.Ft
TO # OF PAVERS
b) CONVERT # OF
PAVERS TO sq.ft
I
II
Sq.ft
Ln.ft.
IIa
PAVERS
IIb
SQUARE FOOT
TOTAL AREA sq. footage
c) FIELD AREA = TOTAL AREA sq. ft (I) minus
SUBTRACT BORDER sq. footage (IIc) equals
BORDER sq. footage
FIELD AREA sq. footage
III. CALCULATE PATTERN RATIO USING FIELD AREA
Paver_____SIZE 1 ( _____%) X (FIELD AREA) =
Paver_____SIZE 2 (_____%) X (FIELD AREA) =
BORDER (sq. footage from above) =
sq. ft.=
sq. ft.=
sq. ft.=
Cubes
Cubes
Cubes
Bands
Bands
Bands
**Please use the corresponding charts for the Product Line you choose from Section One in
this book to calculate the cubes and bands needed for your project.
© CST 11/09
12
Paver Pattern Calculations
2-to1 Herringbone Patterns
6”x 6”=25%
6”x 9”=75%
Munich
(2) 6”x 9”
Contempra
9”x 9”
Roman Cobble
RidgeStone™
Section 2
Munich
Vienna Series
Contempra
(2)
Roman Cobble
=57%
=43%
9”x 9”=27%
(2) 9”x 12”=73%
RidgeStone™
(2) 9”x 12”=60%
12”x 12”=40%
RidgeStone™
12”x 12”=29%
(2)12”x15”=71%
I. TOTAL AREA (square footage)
II. TOTAL BORDER (lineal footage)
a) CONVERT Ln.Ft
TO # OF PAVERS
b) CONVERT # OF
PAVERS TO sq.ft
I
II
Sq.ft
Ln.ft.
IIa
PAVERS
IIb
SQUARE FOOT
TOTAL AREA sq. footage
c) FIELD AREA = TOTAL AREA sq. ft (I) minus
SUBTRACT BORDER sq. footage (IIc) equals
BORDER sq. footage
FIELD AREA sq. footage
III. CALCULATE PATTERN RATIO USING FIELD AREA
Paver_____SIZE 1 ( _____%) X (FIELD AREA) =
Paver_____SIZE 2 (_____%) X (FIELD AREA) =
BORDER (sq. footage from above) =
sq. ft.=
sq. ft.=
sq. ft.=
Cubes
Cubes
Cubes
Bands
Bands
Bands
**Please use the corresponding charts for the Product Line you choose from Section One in
this book to calculate the cubes and bands needed for your project.
© CST 11/09
13
Paver Pattern Calculations
Three Size Patterns
Herringbone 1-to-1-to-1
Herringbone 1-to-1-to-1
6”x 3”=17%
6”x 6”=33%
6”x 9”=50%
Roman
Cobble
Roman
Cobble
Running Bond
Modified Herringbone
6”x 3” =23%
6”x 4.5”=33%
6”x 6” =44%
Roman
Cobble
Herringbone 1-to-1-to-1
6”x 6” =21%
Munich
Contempra
6”x 9” =32%
Roman Cobble
6”x 3” =18%
6”x4.5”=27%
6”x 9” =55%
Roman
Cobble
6”x4.5”=24%
6”x 6” =30%
6”x 9” =46%
3-Size Herringbone
RidgeStone™
9”x 9” =47%
9”x 9” =25%
9”x 12”=33%
12”x12”=42%
3-Size Herringbone
9”x 9” =22%
9”x 12” =29%
12”x15”=49%
RidgeStone™
I. TOTAL AREA (square footage)
II. TOTAL BORDER (lineal footage)
a) CONVERT Ln.Ft
TO # OF PAVERS
b) CONVERT # OF
PAVERS TO sq.ft
I
II
Sq.ft
Ln.ft.
IIa
PAVERS
IIb
SQUARE FOOT
TOTAL AREA sq. footage
c) FIELD AREA = TOTAL AREA sq. ft (I) minus
SUBTRACT BORDER sq. footage (IIc) equals
BORDER sq. footage
FIELD AREA sq. footage
III. CALCULATE PATTERN RATIO USING FIELD AREA
Paver_____SIZE 1 (___%) X (FIELD AREA) =
Paver_____SIZE 2 (___%) X (FIELD AREA) =
Paver_____SIZE 3 (___%) X (FIELD AREA) =
BORDER (sq. footage from above) =
sq. ft.=
sq. ft.=
sq. ft.=
sq. ft.=
Cubes
Cubes
Cubes
Cubes
Bands
Bands
Bands
Bands
**Please use the corresponding charts for the Product Line you choose from Section One in
this book to calculate the cubes and bands needed for your project.
© CST 11/09
14
Paver Pattern Calculations
Four & Five Size Patterns
RidgeStone™
4-Size
Herringbone
Roman Cobble
5-Size
Random
Herringbone
6”x 3” =13%
6”x 4.5”=20%
6”x 6” =27%
6”x 9” =40%
9”x 9”
9”x 12”
12”x12”
12”x15”
=16%
=21%
=28%
=35%
6”x 3”
6”x 4.5”
6”x 6”
6”x 9”
9”x9”
=8%
=12%
=17%
=25%
=38%
I. TOTAL AREA (square footage)
II. TOTAL BORDER (lineal footage)
a) CONVERT Ln.Ft
TO # OF PAVERS
b) CONVERT # OF
PAVERS TO sq.ft
Section 2
Roman Cobble
4-Size
Random
Herringbone
I
II
Sq.ft
Ln.ft.
IIa
PAVERS
IIb
SQUARE FOOT
c) FIELD AREA = TOTAL AREA sq. ft (I)
SUBTRACT BORDER sq. footage (IIc)
TOTAL AREA sq. footage
minus
BORDER sq. footage
equals
III. CALCULATE PATTERN RATIO USING FIELD AREA
Paver____SIZE 1
(___%) X (FIELD AREA) =
Paver____SIZE 2
(___%) X (FIELD AREA) =
Paver____SIZE 3
(___%) X (FIELD AREA) =
Paver____SIZE 4
(___%) X (FIELD AREA) =
Paver____SIZE 5
(___%) X (FIELD AREA) =
BORDER (sq. footage from above) =
sq. ft.=
sq. ft.=
sq. ft.=
sq. ft.=
sq. ft.=
sq.ft.=
FIELD AREA sq. footage
Cubes
Cubes
Cubes
Cubes
Cubes
Cubes
Bands
Bands
Bands
Bands
Bands
Bands
**Please use the corresponding charts for the Product Line you choose from Section One in
this book to calculate the cubes and bands needed for your project.
© CST 11/09
15
Paver Pattern Calculations
Miscellaneous Patterns
Munich
Vienna Series
Contempra
Roman Cobble
Munich
Vienna Series
Contempra
Roman Cobble
RidgeStone™
K-Pattern
6”x 6” =25%
6”x 9” =75%
3-to-1
Running Bond
6”x 6”
6”x 9”
=18%
=82%
3-to-1-to1
Running Bond
(3) 9”x 9” =43%
12”x12” =25%
12”x15” =32%
1-to-1-to1
Running Bond
RidgeStone™
9”x 12” =20%
12”x 12” =36%
12”x15” =44%
I. TOTAL AREA (square footage)
II. TOTAL BORDER (lineal footage)
a) CONVERT Ln.Ft
TO # OF PAVERS
b) CONVERT # OF
PAVERS TO sq.ft
I
II
Sq.ft
Ln.ft.
IIa
PAVERS
IIb
SQUARE FOOT
TOTAL AREA sq. footage
c) FIELD AREA = TOTAL AREA sq. ft (I) minus
SUBTRACT BORDER sq. footage (IIc) equals
BORDER sq. footage
III. CALCULATE PATTERN RATIO USING FIELD AREA
Paver_____SIZE 1 (___%) X (FIELD AREA) =
Paver_____SIZE 2 (___%) X (FIELD AREA) =
Paver_____SIZE 3 (___%) X (FIELD AREA) =
BORDER (sq. footage from above) =
sq. ft.=
sq. ft.=
sq. ft.=
sq. ft.=
FIELD AREA sq. footage
Cubes
Cubes
Cubes
Cubes
Bands
Bands
Bands
Bands
**Please use the corresponding charts for the Product Line you choose from Section One in
this book to calculate the cubes and bands needed for your project.
© CST 11/09
16
Vienna Classic Patterns
Vienna Classic Pattern Options
Section 2
(Antiqued Texture™ Finish & MILL-TEC® Finish )
Five-Size Random Pattern
Vienna
Classic
Small
6x3”
6x6”
6x9”
Pkg.’d together
in one cube
Thk.
Cm.
7
Thk. Layers Sq. Ft.
Inches
Per
Per
Cube
Cube
2 3⁄4”
10
113
Pcs.
Per
Cube
Weight
Per
Cube
6x3”-150
6x6”-160
6x9”-160
3420
6x6”
6x3”
6x9”
Packaged as a full cube only,
no bands
*Note: Pallet is included in the cost of Vienna Classic **No returns on broken pallets
Vienna
Classic
Large
6 x 12”
12 x 12”
Pkg.’d together
in one cube
Thk.
Cm.
7
Thk. Layers Sq. Ft.
Inches
Per
Per
Cube
Cube
2 3⁄4”
10
114
Pcs.
Per
Cube
Weight
Per
Cube
6x12”--120
12x12”-60
3680
6x12”
12x12”
Packaged as a full cube only,
no bands
• The Five Size Random pattern is determined by the length of the horizontal and
vertical seams. The shorter the straight lines, the more random the pattern. The
most random of patterns won’t have seams exceeding the length of all five pieces,
either horizontally or vertically.
• A random pattern is the best option when using just the Vienna Classic Small Cube
since the piece count won’t work for a 1-to-1-to-1 pattern. The Vienna Classic Large
Cube (if used alone) does, however, lend itself to a 2-to1 pattern as shown on the
following page.
© CST 11/09
17
Vienna Classic Pattern
Vienna Classic Pattern Options
(Antiqued Texture™ Finish & MILL-TEC® Finish )
Three-Size Random Herringbone
Vienna
Classic
Small
6x3”
6x6”
6x9”
Pkg.’d together
in one cube
6x6”
Thk.
Cm.
7
Thk. Layers Sq. Ft.
Inches
Per
Per
Cube Cube
2 3⁄4”
10
113
Pcs.
Per
Cube
Weight
Per
Cube
6x3”-150
6x6”-160
6x9”-160
3420
6x9”
6x3”
Packaged as a full cube only,
no bands
*Note: Pallet is included in the cost of Vienna Classic **No returns on broken pallets
•In order to make the above pattern using only the Vienna Classic Small Cube, you will have to modify
(for each cube used) three of the 6”x6” pieces by cutting them in half (making two 6”x3”) and using 3 of
the 6”x9” pieces in place of the 6”x3”, 6”x6” combo rows. By doing this, you will make the cube capable
of a 1-to-1-to-1 random herringbone design.
**See Details 1 & 2 views below.
Cut 3 pieces in
half to make two
6”x3”s for each
cube used.
Use 3 pieces of
6”x9”in place of
where a 6”x3” &
6”x6” would normally
go in this pattern in
each cube used.
6”x9”
DETAIL 1
© CST 11/09
DETAIL 2
18