Bounce Back

Bounce Back
B O U N C E BAC K
style I208V
BLONDE MAPLE
color 02001
Patcraft’s heterogeneous resilient sheet flooring is engineered for high demand environments. Manufactured using high performance raw materials,
Bounce Back is created to offer unparalleled strength and durability for end use installations. Durability, wear retention, longevity and many other
performance requirements drive Patcraft product design so you know when you specify Patcraft, you specify performance.
Bounce Back
Features and Benefits
Performance Testing
• Absorbs shock and impact, reduces vibration to lessen leg stress, and offers
optimum traction and slip resistance for the prevention of injuries.
Coefficient of Friction / EN 13036-A
Specular Gloss / EN ISO 2813
Colorfastness / ISO 105 B02
Resistance to Wear / EN ISO 5470-1
Vertical Deformation / EN 14809
Indentation Resistance / EN 1516
Resistance to Impact / EN 1517
Behavior Under a Rolling Load / EN 1569
Shock Absorption / EN 14808
Ball Reflection / EN 12235
Chemical Product Resistance / F 925
FIRE TEST DATA
Behavior to Fire / EN 13501-1
• Creates subtle spring-like effect to reduce fatigue and allow for more
efficient running and jumping.
• Meets NCAA and EN standards for ball bounce-back percentage and has
softer acoustics for a quieter gym.
• Polyurethane coating seals out dirt and eliminates the need for polishes or
finishes. Simple maintenance involves daily dry mopping and wet mopping
as needed.
• Contains an anti-bacterial surface that eliminates 99.8% of bacteria within
24 hours.
Installation
Ø 70.6
20–25%
Passes
200 mg
0.8 mm
0.13 mm
No damage
No damage
≥ 25%
Ø 97%
Mostly unchanged
(see patcraft.com for complete installation instructions)
• Flooring material and adhesive must be acclimated to the installation
area for a minimum of 48 hours prior to installation.
• Ensure that moisture tests have been conducted and that results do not
exceed 8.0 lbs per 1000 sf in 24 hours as per ASTM F-1869, (or 87%
when using Shaw 4100) In-Situ relative humidity when tested according
to ASTM F-2170.
• pH of concrete sub-floor must not exceed 10.
• Install all cuts and rolls in consecutive sequence.
• Do not reverse sheets for seaming.
• Use Shaw 4100 and a 1/32" x 1/16" x 1/32" U-notch trowel to permanently
install resilient flooring.
• Material should always be visually inspected prior to installation. Any material
installed with visual defects will not be considered a legitimate claim as it
pertains to labor costs.
• Patcraft sheet products are dimensionally stable and will not shrink or
compress. If cut too full, product may bubble.
Class 2 / 2450
• 6.5 mm thickness is more forgiving over uneven sub floors.
• FloorScore® certified for low VOCs
Environmental
• 10 year wear warranty
Indoor Air Quality
Product Specifications
Maintenance
Style Name
Style Number
Construction
Wear Layer Thickness
Patcraft resilient products do not always require a floor finish. However, in
certain applications a floor finish may be desirable to aid in stain resistance,
resistance to abrasion or increased gloss level.
Overall Thickness
Backing Class
Installation
Recommended Adhesive
BOUNCE BACK
I208V
Heterogeneous Sheet
37 mil or .95 mm (wood)
57 mil or 1.45 mm (solid)
6.5 mm
4-ply fused backing system
Glue Down
Shaw 4100
FloorScore® certified
Construction
Swatches
BLONDE MAPLE
02001
Weld Rod EWR2001
LIGHT CHERRY
01451
Weld Rod EWR1451
WARM ELM
01811
Weld Rod EWR1811
S MOKE D OAK
01821
Weld Rod EWR1821
DAR K OAK
01823
Weld Rod EWR1823
CRIMSON
06200
Weld Rod EWR6200
LEMON
06500
Weld Rod EWR6500
SAND
06301
Weld Rod EWR6301
STEEL GREY
06303
Weld Rod EWR6303
MIDNIGHT
06400
Weld Rod EWR6400
Easy Maintenance
Polyurethane Coating
Clear Wear Layer
Packaging
Roll Size
Weight
Reinforced Inner Layer
49.21' or 15 m long
70.86" or 180 cm wide
249.1 lbs/roll (113 kg/roll)
Closed Cell Foam Backing
When ordering weld rods please use style number S126V
Warranty
10 year limited commercial wear warranty.
Please visit patcraft.com for the most current warranty information.
www.patcraft.com | 800.241.4014
© 2014 Shaw, a Berkshire Hathaway Company
patcraft.com | 800.241.4014