9 - Classic Pumps

Transcription

9 - Classic Pumps

SECTION 9
CLASSIC SERIES PUMPS
9
©2016 EDCO USA www.edcousa.net
9:1
CLASSIC PUMPS
CLASSIC PUMPS
DUAL BASE CLASSIC PUMPS
9
TRIPLE BASE CLASSIC PUMPS
General Information
Classic Pumps: How To Order
Classic Pumps
Mini-Classic Pumps
Multi Base Classic Pump: How To Order
QUAD BASE CLASSIC PUMPS
9:3
9:4
9:5 - 9:18
9:19 - 9:20
9:21
Dual Base Classic Pumps
9:22 - 9:23
Triple Base Classic Pumps
9:24 - 9:28
Quad Base Classic Pumps
9:29 - 9:33
Triple & Quad Base Options
9:34 - 9:35
Performance
9:36 - 9:42
9:2
CLASSIC PUMPS
MULTI-STAGE PUMPS - PRINCIPLES OF OPERATION
Exhaust
MULTI-EJECTOR
Larger capacity vacuum pumps are created by placing
identical nozzle sets in a parallel configuration, either in the
same body or in a stacking module. Additional vacuum flow
capacity is attained but maximum vacuum level is not affected
since that is determined by the nozzle series. This method
provides a specific repeatable increment of capacity increase
that is very handy when sizing a pump for an application since
the basic shape of the performance curve doesn’t change.
Vacuum flow and air consumption is increased in proportion
to the number of nozzle sets, and system evacuation time is
decreased proportionately.
Compressed Air
2nd Stage:
High Flow
Induced Vacuum
1st Stage:
High Vacuum
Air Supply
Exhaust
COMPRESSED
INDUCED
EXHAUST
COMPRESSED
INDUCED
EXHAUST
COMPRESSED
INDUCED
EXHAUST
FLOW
VACUUM
FLOW
FLOW
AIRAIR
FLOW
VACUUM
FLOW
AIR FLOW
VACUUM
FLOW
FLOW FLOW
HIGH-FLOW MODE
9
An air supply to the pump is turned on and high-pressure
air flows thru the first nozzle, generating a vacuum flow
when it passes into the second nozzle. As air is evacuated
from the system, induced air flows into the vacuum port
and is drawn into the first stage ejector (gap between first
and second nozzles) and combines with the compressed
air flow from the first nozzle before passing into the second
stage ejector (gap between second and third nozzle). The
powerful combined airflow induces a high vacuum flow
rate thru the second stage ejector until the increasing
vacuum level causes the flap check valve to close. The
valve closing point is dependent on nozzle series (A, E, L,
M, ML, or X) and the operating air pressure. For example
at 87 psi the flap valve will close at 11” Hg for an ML-series
pump and at 18” Hg for an E-series pump. This closing is
evident by the change in slope of the performance curve.
HIGH-VACUUM MODE
After the flap valve closes, induced air continues to be
drawn into the first stage ejector and the vacuum level
will increase to the maximum level allowed by the nozzle
series. At this point the second stage is isolated and
is not contributing to evacuation of the system. Some
of our competitors offer three and four stage vacuum
pumps but these provide very little benefit for industrial
systems since a third stage will shut down at 3” Hg and
a fourth stage will shut down at 1.5” Hg. EDCO nozzles
are optimized to give extra vacuum flow at higher vacuum
levels to more-than make up for lower flows from zero to
3” Hg. EDCO evacuation times to 12” Hg or higher will be
equal or better than our competition.
9:3
CLASSIC PUMPS
SERIES
CAPACITY
ML
A
E
L
M
ML
MLEN
X
See chart
below for
information.
100
25
50
75
100
125
150
175
200
X SIZES
40
80
120
160
200
240
280
320
SEAL
MATERIAL
N
E
N
S
V
VH
See chart
below for
information.
PORTS
PUMP STYLE
-
(Blank) = NPTF
G = G Threads
OPTIONS
2SB24D
-
(Blank) = Basic Pump
6010 = 1” Aligned Style Base
6034 = 3/4” Aligned Style Base
2ES = Energy Saver
2PS = Piloted Supply Valve
2PSB = Piloted Supply & Blow-Off Valves
2OS24D = Supply Valve, 24VDC 2.3W, Normally Open
2OS110A = Supply Valve, 110VAC 50/60Hz, Normally Open
2OSB24D = Supply & Blow Valves, 24VDC 2.3W, Normally Open
2OSB110A = Supply & Blow Valves, 110VAC 50/60Hz, Normally Open
2S24D = Supply Valve, 24VDC 2.3W, Normally Closed
2S110A = Supply Valve, 110VAC 50/60Hz, Normally Closed
2SB24D = Supply & Blow Valves, 24VDC 2.3W, Normally Closed
2SB110A = Supply & Blow Valves, 110VAC 50/60Hz, Normally Closed
SM = Surface Mount w/ Top Gauge
SMS = Surface Mount w/ Side Gauge
SERIES
PFC
NR = Non-Return Valve
LV = No Flapper Valve
RT3 = Timed Quick Release
PFC = 3/4” Filter & Elements
SP3 = Side Mount
FP = Face Mount
CP = Classic Mount
3
Specify side “A” or “B” when
ordering these options.
SEAL MATERIAL
CODE
DESCRIPTION
MAX VACUUM
inHG [-kPa]
SUPPLY
PRESSURE
psi [bar]
A
Ultra-High Flow
27.00 [91.4]
87 [6]
E
Ultra-High Flow
26.70 [90.4]
87 [6]
L
High Flow
22.80 [77.2]
87 [6]
M
Low Pressure
27.10 [91.8]
49 [3.4]
ML
Multi-Characteristic
27.50 [93.1]
58 to 87 [4 to 6]
MLENT
ENT Plated ML
27.50 [93.1]
58 to 87 [4 to 6]
MLSS
316 Stainless Steel ML
27.50 [93.1]
58 to 87 [4 to 6]
X
High Vacuum
28.30 [95.8]
87 [6]
CODE
ELASTOMER
WORKING
TEMPERATURE
COLOR
E
Ethylene Propylene
(EPDM)
-4°F to 230°F
-20°C to 110°C
Black
N
Nitrile
(Buna-N)
-4°F to 230°F
-20°C to 110°C
Black
S
Silicone
-100°F to 400°F
-70°C to 205°C
Orange
V1
Flourocarbon
(Viton1)
40°F to 450°F
4°C to 230°C
Grey
VH1
Flourocarbon
(Viton1)
40°F to 450°F
4°C to 230°C
Grey
For operating temperatures above 180°F (82.2°C). The pump will be assembled using high
temperature sealant, metal end plugs, and will be supplied without exhaust silencer and
vacuum gauge. Available for basic pumps only.
1
Viton is a registered trademark of Du Pont Dow Elastomers.
2
Many pump styles and options can be combined. Call for more info.
3
9:4
9
CLASSIC PUMPS
BASIC PUMP : 25 - 100 CAPACITY
3
1A
2A
2A
2A
2
Optional Non-Return
WEIGHT
lb [g]
1.63 [739]
1.63 [739]
1.63 [739]
1.63 [739]
5.18 [131.4]
X
40
80
120
180
5.42 [137.7]
5.42
5.42
5.42
[137.7]
[137.7]
[137.7]
0.0 0.00.0
0.0
0.0
0.160.16
[3.9]
0.16
[3.9]
0.16
[3.9]
[3.9]
0.16 [3.9]
5.42 [137.7]
2.40 [60.8]
2.40
2.40
2.40
[60.8]
[60.8]
[60.8]
1.41 [35.8]
1.41
1.41
1.41
[35.8]
[35.8]
[35.8]
2.40 [60.8]
4.124.12
[104.6]
4.12
[104.6]
[104.6]
4.12
[104.6]
4.12 [104.6]
0.0
2A
1
0.0
0.43 [10.8]
G
G 1/4
M5X0.8 (10-32 UNF)
G 3/4
G 1/8 NPSF
G 3/4
3.54 [89.9]
NPT
1/4 NPTF
M5X0.8 (10-32 UNF)
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
3.54 [89.9]
3.54
3.54
3.54
[89.9]
[89.9]
[89.9]
FUNCTION
Air Supply
Alternate - Signal
Vacuum
Vacuum - Alternate
Exhaust
0.0
0.22 [5.6]
0.0
0.0
0.0
0.22
1.00[5.6]
[25.4]
0.22
0.22
0.22
[5.6]
[5.6]
[5.6]
1.15
[29.2]
1.00 [25.4]
1.00
1.00
1.00
[25.4]
[25.4]
[25.4]
1.15
1.82[29.2]
[46.2]
1.15
1.15
1.15
[29.2]
[29.2]
[29.2]
1.82 [46.2]
1.82
1.82
1.82
[46.2]
[46.2]
[46.2]
CODE
1
1A
2
2A
3
2A
0.65 [16.5]
0.0
0.65
0.65
0.65
[16.5]
[16.5]
[16.5]
0.0
0.0
0.0
0.0
2.46 [62.5]
0.360.36
[9.0]
0.36
[9.0]
0.36
[9.0]
[9.0]
0.36
[9.0]
0.0 0.0
0.0
0.0
0.0
1.511.51
1.51
1.51
[38.2]
[38.2]
1.51
[38.2]
[38.2]
[38.2]
0.0
0.0
0.0
0.43 [10.8]
0.43
0.43
0.43
[10.8]
[10.8]
[10.8]
1.41 [35.8]
2A
1.471.47
[37.3]
1.47
[37.3]
[37.3]
1.47
[37.3]
1.47 [37.3]
0.360.36
[9.0]
0.36
[9.0]
0.36
[9.0]
[9.0]
0.36
[9.0]
0.230.23
[5.7]
0.23
[5.7]
0.23
[5.7]
[5.7]
0.23
[5.7]
0.0 0.0
0.0
0.0
0.0
0.0
2A
1.77 [45.0]
1.77
1.77
1.77
[45.0]
[45.0]
[45.0]
0.65 [16.5]
1A
2.46 [62.5]
1.77
[45.0]
2.46
2.46
2.46
[62.5]
[62.5]
[62.5]
9
1
SERIES
A, E, L, M, ML
25
50
75
100
5.18
5.60[131.4]
[142.2]
5.18
5.18
5.18
[131.4]
[131.4]
[131.4]
5.60 [142.2]
5.60
5.60
5.60
[142.2]
[142.2]
[142.2]
The pump is controlled via air supply through the pump base inlet port. Vacuum
gauge and silencer included.
1.231.23
[31.2]
1.23
[31.2]
1.23
[31.2]
[31.2]
1.23 [31.2]
2.312.31
[58.5]
2.31
[58.5]
2.31
[58.5]
[58.5]
2.31 [58.5]
M4X0.7
M4X0.7
M4X0.7
M4X0.7
6 Places
6
Places
6 Places
6M4X0.7
Places
6 Places
9:5
3
2
0.180.18
[4.6]
Thru
0.18
[4.6]
Thru
0.18
[4.6]
[4.6]
Thru
Thru
4 Places
4
Places
0.18
[4.6]
4 Places
4 PlacesThru
4 Places
CLASSIC PUMPS
BASIC PUMP : 125 - 200 CAPACITY
FUNCTION
Air Supply
Alternate - Signal
Vacuum
Vacuum - Alternate
Exhaust
0.0
2A
NPT
1/4 NPTF
M5X0.8 (10-32 UNF)
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G
G 1/4
M5X0.8 (10-32 UNF)
G 3/4
G 1/8 NPSF
G 3/4
9
4.12 [104.6]
4.12
4.12[104.6]
[104.6]
2A
1
3
1A
2A
2A
2A
2
Optional Non-Return
0.0
0.0
0.0
0.16 [3.9]
0.16
0.16[3.9]
[3.9]
0.00.0
0.16 [3.9]
0.16
1.23[3.9]
[31.2]
1.23
1.23[31.2]
[31.2]
2.73 [69.3]
2.732.73
[69.3]
2.73[69.3]
[69.3]
2.73 [69.3]
3.54 [89.9]
3.543.54
[89.9]
3.54[89.9]
[89.9]
3.54 [89.9]
4.12
[104.6]
4.12
[104.6]
0.0
0.0 0.0
0.0
0.22
[5.6]
0.0
0.220.22
[5.6]
0.22[5.6]
[5.6]
0.22 [5.6]
1.00 [25.4]
1.001.00
[25.4]
1.00[25.4]
[25.4]
1.15
[29.2]
1.00
[25.4]
1.151.15
[29.2]
1.15[29.2]
[29.2]
1.82 1.15
[46.2]
[29.2]
1.821.82
[46.2]
1.82[46.2]
[46.2]
1.82 [46.2]
CODE
1
1A
2
2A
3
0.65 [16.5]
0.650.65
[16.5]
0.65[16.5]
[16.5]
0.65 [16.5]
0.0
0.0 0.0
0.0
0.0
2.46 [62.5]
2.462.46
[62.5]
2.46[62.5]
[62.5]
2.46 [62.5]
1.77 [45.0]
1.771.77
[45.0]
1.77[45.0]
[45.0]
1.77 [45.0]
0.36 [9.0]
0.36
0.36[9.0]
[9.0]
0.0
0.0
0.0
0.36
[9.0]
0.36
[9.0]
0.00.0
0.36 [9.0]
0.36
0.36[9.0]
[9.0]
0.23 [5.7]
0.23
0.23[5.7]
[5.7]
0.36
[9.0]
0.36
[9.0]
0.0
0.0
0.0
0.23
[5.7]
0.23
[5.7]
0.00.0
4.77 [121.2]
4.774.77
[121.2]
4.77[121.2]
[121.2]
4.77 [121.2]
5.42 [137.7]
5.425.42
[137.7]
5.42[137.7]
[137.7]
5.42 [137.7]
2A
2.40 [60.8]
2.402.40
[60.8]
2.40[60.8]
[60.8]
2.40 [60.8]
2A
WEIGHT
lb [g]
2.21 [1002]
2.21 [1002]
2.21 [1002]
2.21 [1002]
2.18
[55.3]
2.18
[55.3]
1.41 [35.8]
1.411.41
[35.8]
1.41[35.8]
[35.8]
1.41 [35.8]
1A
1.51
1.51
1.51
[38.2]
[38.2]
[38.2]
1.51
1.51
[38.2]
[38.2]
2.18 [55.3]
2.18
2.18[55.3]
[55.3]
0.0 0.0
0.0
0.43 [10.8]
0.0
0.430.43
[10.8]
0.43[10.8]
[10.8]
0.43 [10.8]
1
X
200
240
280
320
5.18 [131.4]
5.185.18
[131.4]
5.18[131.4]
[131.4]
5.60
[142.2]
5.18
[131.4]
5.605.60
[142.2]
5.60[142.2]
[142.2]
5.60 [142.2]
SERIES
A, E, L, M, ML
125
150
175
200
The pump is controlled via air supply through the pump base inlet port. Vacuum
gauge and silencer included.
3
1.23
[31.2]
1.23
[31.2]
2.31 [58.5]
2.31
2.31[58.5]
[58.5]
M4X0.7
2.31
[58.5]
2.31
[58.5]
M4X0.7
6M4X0.7
Places
6 6Places
Places
M4X0.7
M4X0.7
9:6
6 Places
6 Places
0.18 [4.6]
0.18[4.6]
[4.6]
40.18
Places
4 4Places
Places
0.18
[4.6]
0.18
[4.6]
©2016 EDCO USA
www.edcousa.net
4 Places
4 Places
2
CLASSIC PUMPS
The pump base contains an integral pilot operated 3-way air valve that
controls vacuum on/off via a pneumatic pilot signal. When the pilot
signal is present the vacuum pump turns on. When the pilot signal is
exhausted, the pump turns off. Available in any nozzle series (A, E, L, M,
ML or X). See chart for available capacities.
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
X
40
80
120
160
200
240
280
320
WEIGHT
lb [g]
2.81 [1275]
2.81 [1275]
2.81 [1275]
2.81 [1275]
3.41 [1547]
3.41 [1547]
3.41 [1547]
3.41 [1547]
“A”
in [mm]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
4
Pilot for Vacuum Control
4.78 [121.4]
M5X0.8
2 Places, Both Sides
G
G 1/4 G
G 3/4 G
G 1/8 NPSF
G 3/4 G
G 1/8 NPSF
1.23
[31.2]
1.23[31.2]
[31.2]
1.23
0.0
0.16 [3.9]
2.31
[58.5]
2.31[58.5]
[58.5]
2.31
1.23 [31.2]
M4X0.7
4 Places
2.31 [58.5]
9:7
2A
2
3
7.40 [188.0]
4.12 [104.6]
6.82
6.82 [173.2]
6.82 [173.2]
[173.2]
7.40
[188.0]
7.40 [188.0]
7.40
6.82 [188.0]
[173.2]
4.78 [121.4]
4.12
[104.6]
4.12[104.6]
[104.6]
4.12
0.0 0.0
0.0
0.16
0.16[3.9]
[3.9][3.9]
0.16
4.78
4.78 [121.4]
4.78 [121.4]
[121.4]
NPT
1/4 NPTF
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G 1/8 NPSF
1.51
[38.2]
4.78
4.78 [121.4]
4.78 [121.4]
[121.4]
0.0
1.94 [49.3]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Pilot Signal - Air Control
0.89
[22.6]
0.89[22.6]
[22.6]
0.89
A[5.3]
0.21
0.21
[5.3]
0.21 [40.6]
[5.3]
1.60
0.0 0.0
0.0
0.89 [22.6]
0.21 [5.3]
0.0
0.0
0.0
0.0
0.40
0.40 [10.2]
0.40 [10.2]
[10.2]
0.0
0.40 [10.2]
CODE
1
2
2A
3
4
0.62
0.62 [15.7]
0.62 [15.7]
[15.7]
0.0
0.0
0.0
0.62 [15.7]
2.54
2.54 [64.4]
2.54 [64.4]
[64.4]
1.94
[49.3]
1.94 [49.3]
1.94
2.54 [49.3]
[64.4]
1
0.52[13.2]
[13.2]
0.52
[13.2]
0.52
0.49[12.3]
[12.3]
0.49
[12.3]
0.49
0.0
0.0
0.0
0.52 [13.2]
0.49 [12.3]
0.0
AA A
1.60
[40.6]
1.60[40.6]
[40.6]
1.60
1.58 [40.2]
Pilot Exhaust
0.0
0.0
0.0
0.21 [5.3]0.21
0.21 [5.3]
[5.3]
0.0
0.21 [5.3]
1.58
1.58 [40.2]
1.58 [40.2]
[40.2]
9
1.511.51
1.51
[38.2]
[38.2][38.2]
7.21
7.21 [183.1]
7.21 [183.1]
[183.1]
7.65
[194.3]
7.65 [194.3]
7.65 [194.3]
7.21 [183.1]
7.65 [194.3]
2PS : PILOTED SUPPLY
CLASSIC PUMPS
X
40
80
120
160
200
240
280
320
WEIGHT
lb [g]
2.81 [1275]
2.81 [1275]
2.81 [1275]
2.81 [1275]
3.41 [1547]
3.41 [1547]
3.41 [1547]
3.41 [1547]
“A”
in [mm]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
4
2.31 [58.5]
2.31 [58.5]
1.23 [31.2]
1.23 [31.2]
M4X0.7
4 Places
2.31 [58.5]
2.31 [58.5]
9:8
4.78 [121.4]
4.78 [121.4]
4.78 [121.4]
4.78 [121.4]
2
7.40 [188.0]
7.40 [188.0]
4.12 [104.6]
6.82 [173.2]
2A
4.78 [121.4]
1.58 [40.2]
1.58 [40.2]
4.12 [104.6]
6.82 [173.2]
6.82 [173.2]
1.23
1.23 [31.2]
0.0 [31.2]
0.0
0.16 [3.9]
0.16 [3.9]
1.51
38.2
4.12 [104.6]
4.12 [104.6]
4.78 [121.4]
0.0
0.0
0.16 [3.9]
0.16 [3.9]
0.0
0.0
0.40 [10.2]
0.40 [10.2]
M5X0.8
0.0
0.40 [10.2]
G
G 1/4
G 3/4
G 1/8 NPSF
G 3/4
G 1/8 NPSF
0.0
0.40 [10.2]
0.0
0.0
NPT
1/4 NPTF
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G 1/8 NPSF
0.20 [5.1]
0.0
0.21 [5.3]
0.20 [5.1]
0.88 [22.4]
0.0
1.58 [40.2]0.21 [5.3]
0.20 [5.1] 0.20 [5.1]
0.88 [22.4]
0.0
0.0
1.58
0.21 [5.3]
0.21[40.2]
[5.3]
0.88 [22.4]
0.88 [22.4]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Pilot Signal
0.0
0.62 [15.7]
0.62 [15.7]
1.94 [49.3]
0.62 [15.7]
2.54 [64.4]
2.54 [64.4]
0.0
1.94 [49.3]
1.94 [49.3]
0.62 [15.7]
CODE
1
2
2A
3
4
1.94 [49.3]
2.54 [64.4]
2.54 [64.4]
1
0.52 [13.2]0.89 [22.6]
0.52 [13.2]
0.89 [22.6]
A [5.3]
A
0.49 [12.3] 0.21
0.49 [12.3]
0.21 [5.3]
1.60 [40.6]
1.60
0.0
0.0
0.0 [40.6]
0.0
0.52 [13.2]
[22.6]
0.520.89
[13.2]
0.89 [22.6]
0.49 [12.3]
0.49 0.21
[12.3][5.3]
0.21 [5.3]
0.0
0.0
0.0
0.0
1.51
38.2
6.82 [173.2]
4.78 [121.4]
4.78 [121.4]
7.40 [188.0]
Pilot for Blow-Off Control
A
A
Pilot Exhaust
1.60 [40.6]
1.60 [40.6]
1.51
38.2
7.21 [183.1]
7.65 [194.3]
1.51
38.2
4
7.21 [183.1]
7.21 [183.1]
7.65 [194.3]
7.65 [194.3]
Series
A, E, L, M, ML
25
50
75
100
125
150
175
200
7.21 [183.1]
7.65 [194.3]
The pump base contains two pilot operated 3-way air valves that provide
full pump control via two externally supplied pneumatic pilot signals.
With a constant air supply to the pump base, one pilot signal controls
vacuum pump on/off and the second pilot signal controls blow-off air
to dissipate vacuum for faster system cycle time. Available in any nozzle
series (A, E, L, M, ML or X). See chart for available capacities.
7.40 [188.0]
2PSB : PILOTED SUPPLY & BLOW-OFF
3
9
0.52 [13.2]
0.49 [12.3]
0.0
4.78 [121.4]
0.0
0.21 [5.3]
0.0
2OS24D / 2OS110A - Normally Open
80
120
160
200
240
280
320
2.87 [1301]
2.87 [1301]
2.87 [1301]
3.47 [1574]
3.47 [1574]
3.47 [1574]
3.47 [1574]
0.0
0.16 [3.9]
Solenoid for Vacuum Control
1.23 [31.2]
9:9
7.21 [183.1]
7.65 [194.3]
4.78 4.78
[121.4]
4.78
[121.4]
[121.4]
4.78 [121.4]
7.40 [188.0]
6.82 [173.2]
[121.4]
4.78 4.78
[121.4]
4.78
[121.4]
2A
7.40 [188.0]
4.12 [104.6]
4.78 [121.4]
4.12 [104.6]
[173.2]
6.82 6.82
[173.2]
6.82
[173.2]
4.12 [104.6]
4.12 [104.6]
4.12 [104.6]
6.82 [173.2]
2.31
1.23 [58.5]
[31.2]
2.31 [58.5]
2.31 [58.5]
M4X0.7
0.0
4 Places
2.31 [58.5]
0.16 [3.9]
1.51
1.51
[38.2]
[38.2]
1.51
[38.2]
M5X0.8
4.78 [121.4]
0.0
0.40 [10.2]
0.0
0.00.16 [3.9]
0.0
0.16 [3.9]0.16 [3.9]
0.0
1.23 [31.2]
0.16[31.2]
[3.9]
1.23 [31.2]
1.23
0.0 0.00.0
[10.2]
0.40 0.40
[10.2]
0.40
[10.2]
G
G 1/4
G 3/4
G 1/8 NPSF
G 3/4
0.0
0.40 [10.2]
NPT
1/4 NPTF
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
1.51
[38.2]
4.78 [121.4]
0.0
0.21 [5.3]
0.0 0.00.0
0.89 [22.6]
0.21 [5.3]
0.0
0.0
0.21 [5.3]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
0.62 0.62
[15.7]
0.62
[15.7]
[15.7]
0.0
1.94 1.94
[49.3]
1.94
[49.3]
[49.3]
0.62
[15.7]
2.54 2.54
[64.4]
2.54
[64.4]
[64.4]
1.94 [49.3]
0.0
2.54 [64.4]
0.62 [15.7]
1.94 [49.3]
2.54 [64.4]
CODE
1
2
2A
3
0.52 [13.2]
0.49 [12.3]
0.0
Pilot Exhaust
0.52 [13.2]
0.89 [22.6]
A
0.52 [13.2]
0.52 [12.3]
[13.2]0.89 [22.6]
0.89
0.49
0.21[22.6]
[5.3]
0.49 [12.3]
0.49 [12.3] 0.21 [5.3]0.21 [5.3]
0.0
0.0
0.52 [13.2]
0.89 [22.6]
0.0
0.0
0.0
0.0
0.49 [12.3]
0.21 [5.3]
0.0
0.0 A
0.0 0.00.0
0.21 0.21
[5.3]
0.21
[5.3]
[5.3]
A
A
A
1
1.51
[38.2]
7.21 [183.1]
7.65 [194.3]
2.31 [58.5]
7.21 7.21
[183.1]
7.21
[183.1]
[183.1]
[194.3]
7.65 7.65
[194.3]
7.65
[194.3]
1.23 [31.2]
2
3
[188.0]
7.40 7.40
[188.0]
7.40
[188.0]
NO Option Adapter Plate
Weight: 0.02 lb (9.1g)
Thickness: 0.23 [5.7]
9
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
4.12 [104.6]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
4.78 [121.4]
50
75
100
125
150
175
200
2S24D - 24 V DC, 2.3 W solenoid control valve.
2S110A - 120 V AC, 60 Hz, (110 V AC, 50 Hz) 2.3 W solenoid control valve.
0.0
0.40 [10.2]
0.62 [15.7]
1.94 [49.3]
2.54 [64.4]
0.89 [22.6]
0.21 [5.3]
CLASSIC PUMPS
0.0
Order DIN T-9 Molded Cords Separately:
2S24D / 2S110A : SOLENOID CONTROLLED SUPPLY
923-2M01 = Std. 2M
The pump base contains an integral pilot operated 3-way air valve that
923-2M31 = L.E.D. 0-50V, 2M
controls vacuum on/off via a solenoid pilot valve. When the solenoid
923-2M81 = L.E.D.70-250V, 2M
valve is energized the vacuum pump turns on. When the solenoid valve is
SERIES
WEIGHT
“A”
de-energized, the pump turns off. Available in any nozzle series (A, E, L, M,
A, E, L, M, ML
X
lb [g]
in [mm]
ML or X). See chart for available capacities.
25
40
2.87 [1301]
1.96 [49.8]
0.0
0.21 [5.3]
The pump base contains two pilot operated 3-way air valves that provide
full pump control via two solenoid pilot valves. With a constant air supply
to the pump base, one solenoid valve controls vacuum pump on/off and the
second solenoid valve controls blow-off air to dissipate vacuum for faster
system cycle time. Available in any nozzle series (A, E, L, M, ML or X). See
chart for available capacities.
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
0.0
0.40 [10.2]
2SB24D - 24 V DC, 2.3 W solenoid control valve.
2SB110A - 120 V AC, 60 Hz, (110 V AC, 50 Hz) 2.3 W solenoid control valve.
2OSB24D / 2OSB110A - Normally Open
X
40
80
120
160
200
240
280
320
0.89 [22.6]
0.21 [5.3]
0.0
7.21 [183.1]
7.65 [194.3]
7.40 [188.0]
2
6.82 [173.2]
4.12 [104.6]
4.78 [121.4]
0.0
0.40 [10.2]
M4X0.7
2.31
2.31
[58.5]
[58.5]
2.31
[58.5]
4 Places
2A
6.82 [173.2]
6.82
6.82[173.2]
6.82
[173.2]
[173.2]
7.40 [188.0]
7.40
7.40[188.0]
7.40
[188.0]
[188.0]
4.12
4.12
[104.6]
[104.6]
4.12
[104.6]
1.23
1.23
[31.2]
[31.2]
1.23
[31.2]
2.31 [58.5]
0.0
0.16 [3.9] 9:10
4.78 [121.4]
4.12 [104.6]
0.0
0.16 [3.9]
0.00.0
0.0
0.16
0.16
[3.9]
[3.9]
1.23
[31.2]
0.16 [3.9]
1.23 [31.2]
1.51
[38.2]
M5X0.8
0.0
0.0
0.0
0.400.0
[10.2]
0.40
0.40[10.2]
0.40
[10.2]
[10.2]
G
G 1/4
G 3/4
G 1/8 NPSF
G 3/4
1.51
[38.2]
1.51
1.51
1.51
[38.2]
[38.2]
[38.2]
4.78 [121.4]
4.78
4.78[121.4]
4.78
[121.4]
[121.4]
A
0.20 [5.1]
0.0
0.21 [5.3]
0.0
0.62 [15.7]
NPT
1/4 NPTF
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
0.20 [5.1]
0.20
0.20[5.1]
0.20
[5.1]
0.0[5.1]
0.0
0.0 0.0
0.21 [5.3]
0.21
0.21[5.3]
0.21
[5.3][5.3]
0.62 [15.7]
0.62
0.62[15.7]
0.62
[15.7]
[15.7]
0.0
0.0
0.0 0.0
2.54 [64.4]
2.54
2.54[64.4]
2.54
[64.4]
[64.4]
1.94 [49.3]
1.94
1.94[49.3]
1.94
[49.3]
[49.3]
0.52 [13.2]
0.49 [12.3]
0.0
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
1.94 [49.3]
2.54 [64.4]
CODE
1
2
2A
3
AA
A
0.89 [22.6]
0.21 [5.3]
0.89
[22.6]
0.89
[22.6]
0.89
[22.6]
0.0
0.21
0.21
[5.3]
0.21 [5.3]
[5.3]
0.00.0
0.0
7.21 [183.1]
7.21
7.21
7.21
[183.1]
[183.1]
7.65[183.1]
[194.3]
7.65
7.65
[194.3]
7.65[194.3]
[194.3]
1.23 [31.2]
2.31 [58.5]
Solenoid for Vacuum Control
Solenoid for Blow-Off Control
A
1
“A”
in [mm]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
4.12
[104.6]
2.67
[67.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
0.0
0.16 [3.9]
NO Option Adapter Plate
Weight: 0.02 lb (9.1g)
Thickness: 0.23 [5.7]
Pilot
Exhaust
0.52
[13.2]
0.49 [12.3]
0.52
[13.2]
0.52
[13.2]
0.52
[13.2]
0.0
0.49
[12.3]
0.49
[12.3]
0.49
[12.3]
0.00.0
0.0
WEIGHT
lb [g]
2.94 [1334]
2.94 [1334]
2.94 [1334]
2.94 [1334]
3.54 [1606]
3.54 [1606]
3.54 [1606]
3.54 [1606]
4.78 [121.4]
923-2M01 = Std. 2M
923-2M31 = L.E.D. 0-50V, 2M
923-2M81 = L.E.D.70-250V, 2M
0.0
0.62 [15.7]
1.94 [49.3]
2.54 [64.4]
2SB24D & 2SB110A : SOLENOID CONTROLLED SUPPLY & BLOW-OFF
4.78 [121.4]
4.78
4.78[121.4]
4.78
[121.4]
[121.4]
CLASSIC PUMPS
0.89 [22.6]
0.21 [5.3]
Order0.0
DIN T-9 Molded Cords Separately:
4.78 [121.4]
0.52 [13.2]
0.49 [12.3]
0.0
3
9
CLASSIC PUMPS
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
X
40
80
120
160
200
240
280
320
1
3
4
2A
0.0
0.00.21 [5.3]
0.0
0.00.0
0.21 [5.3]
0.88
[22.4]
0.21 [5.3]
0.21
0.21
[5.3]
[5.3]
0.88 [22.4]
0.88 [22.4]
0.88
0.88
[22.4]
[22.4]
0.89[22.6]
[22.6]
0.89
0.21[5.3]
[5.3]
0.21
0.0
0.0
G
G 1/4
G 3/4
G 1/8 NPSF
G 3/4
G 1/8 NPSF
2A
NR- INSTALLED
0.21[22.6]
[5.3]
0.890.89
[22.6]
0.0
A
A
0.210.21
[5.3][5.3]
1.60[40.6]
[40.6]
1.60
0.0
0.0
4.78 [121.4]
4.78 [121.4]
4.78 [121.4]
4.78
[121.4]
4.78
[121.4]
NPT
1/4 NPTF
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G 1/8 NPSF
1.51
1.51
[38.2]
[38.2]
0.0
0.16
0.0[3.9]
0.0
0.160.16
[3.9][3.9]
1.23 [312]
1.231.23
[312][312]
0.0
0.0
2.31
[58.5]
0.16[3.9]
[3.9]
0.16
2.312.31
[58.5]
[58.5]
M4X0.7
1.23[312]
[312]
1.23
4 Places
2.31[58.5]
[58.5]
2.31
2
9:11
M5X0.8
4.12 [104.6]
4.124.12
[104.6]
[104.6]
4.78 [121.4]
4.78 [121.4]
4.78 [121.4]
4.78
[121.4]
4.78
[121.4]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Pilot Signal - Air Control
A
1.60 [40.6]
A A
1.601.60
[40.6]
[40.6]
0.89
[22.6]
0.0
0.40 [10.2]
0.0
0.0 [10.2]
0.00.0
0.40
0.40 [10.2]
0.40
[10.2]
0.40
[10.2]
CODE
1
2
2A
3
4
0.52 [13.2]
0.49
[12.3]
[13.2]
0.520.52
[13.2]
0.0
[12.3]
0.490.49
[12.3]
0.0 0.0
0.52[13.2]
[13.2]
0.52
0.49[12.3]
[12.3]
0.49
0.0
0.0
0.62 [15.7]
0.62 [15.7]
0.0
0.62 [15.7]
0.62
0.62
[15.7]
[15.7]
0.0
0.0
0.00.0
3.86 [98.0]
3.86 [98.0]
3.86 [98.0]
3.86
3.86
[98.0]
[98.0]
2.29
2.29
[58.1]
[58.1]
1
2.54 [64.4]
2.54 [64.4]
1.94
[49.3]
2.54 [64.4]
2.54
2.54
[64.4]
[64.4]
1.94 [49.3]
1.94 [49.3]
1.94
1.94
[49.3]
[49.3]
2.29
2.29[58.1]
2.29
[58.1]
[58.1]
“A”
in [mm]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
1.96 [49.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
2.67 [67.8]
1.51
1.51[38.2]
1.51
[38.2]
[38.2]
4
9
WEIGHT
lb [g]
2.71 [1229]
2.71 [1229]
2.71 [1229]
2.71 [1229]
3.34 [1501]
3.34 [1501]
3.34 [1501]
3.34 [1501]
7.21 [183.1]
7.21 [183.1]
7.65 [194.3]
7.21 [194.3]
[183.1]
7.21
[183.1]
7.21
[183.1]
7.65
7.65 [194.3]
7.65
[194.3]
7.65
[194.3]
The pump includes a non-return valve and an air piloted supply valve
controlled via an adjustable pneumatic vacuum sensor. The vacuum
sensor cycles the pump off when a preset vacuum level is achieved, and
cycles the pump on when the vacuum level decreases from the preset
level. A regulated air supply is connected to port 1 (Air Supply– Main), and
the pump is controlled by a positive pilot signal to port 4 (Pilot Signal- Air
Control). The energy saver control will operate only when the pilot signal is
present. Best suited for non-porous or volume tank applications. Because
of the non-return valve, a quick release valve (RC18A) or some other means
should be provided for dissipating the vacuum.
4.12[104.6]
[104.6]
4.12
2A
2
6.82 [173.2]
6.82 [173.2]
7.40
[188.0]
6.82 [173.2]
6.82
[173.2]
6.82
[173.2]
7.40 [188.0]
7.40 [188.0]
7.40
[188.0]
7.40
[188.0]
2ES : PNEUMATIC ENERGY SAVER
3
CLASSIC PUMPS
A
2.95 [74.9]
2.95 [74.9]
2.95 [74.9]
0.0
0.00.0
0.64
[16.3]
0.64
[16.3]
0.0
0.0
0.64 [16.3]
0.64 [16.3]
A A
1.33 [33.8]
2.95 [74.9]
1.33 [33.8]
1.33 [33.8]
The SM (Surface Mount) option features a pump base with 1/2 NPTF
(G1/2 on “-G”) vacuum ports at three locations and a flat backside for
panel mounting. One to three vacuum lines can be run directly from the
pump base and any unused vacuum ports are simply plugged, which
make this pump configuration ideal for robotic end-effectors.
0.0
1.33 [33.8]
0.0 0.0
SM : SURFACE MOUNT
A
2A
FUNCTION
Air Supply
Alternate - Air Signal
Vacuum - Main
Vacuum - Alternate
Exhaust
NPT
1/4 NPTF
M5X0.8 (10-32)
3/4 NPTF
G 1/8 NPSF
1/2 NPTF
G
G 1/4
M5X0.8 (10-32)
G 3/4
G 1/8 NPSF
G 1/2
9.74 [247.7]
9.74 [247.7]
9.74 [247.7]
CODE
1
1A
2
2A
3
2
9.74 [247.7]
in [mm]
1.97 [50.0]
1.97 [50.0]
1.97 [50.0]
1.97 [50.0]
2.68 [68.1]
2.68 [68.1]
2.68 [68.1]
2.68 [68.1]
5.60 [142.2]
5.60 [142.2]
5.60 [142.2]
X
40
80
120
160
200
240
280
320
0.0
WEIGHT
lb [g]
2.27 [1030]
2.27 [1030]
2.27 [1030]
2.27 [1030]
3.05 [1383]
3.05 [1383]
3.05 [1383]
3.05 [1383]
0.20
0.20
[5.2]
[5.2]
2 Places
2 Places
0.20 [5.2]0.20 [5.2]
2 Places2 Places
4.25 [108.0]
5.60 [142.2]
4.25 [108.0]
4.25 [108.0]
0.0
4.25 [108.0]
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
0.0
0.0 0.0
0.88 [22.2]
0.88 [22.2]
0.88 [22.2]
1.51
1.51
[38.2]
[38.2]
1.51
1.51
[38.2]
[38.2]
“A”
0.0
1.04 [26.4]
1.04 0.0
[26.4]
3
0.88 [22.2]
1.04
[26.4]
1.04
[26.4]
2.17 [55.0]
2.17
[55.0]
0.0
2.17
[55.0]
2.17
[55.0]
3.32
[84.3]
3.32
[84.3]
2.94
[74.7]
2.94
[74.7]
3.32
[84.3]
3.32
[84.3]
2
2.94 [74.7]
2.94 [74.7]
1
0.24
0.24
[6.0]
[6.0]
0.00.0
0.37
0.37
[9.4]
[9.4]
0.24 [6.0]
0.24
[6.0]
0.0
0.0
0.37 [9.4]0.37 [9.4]
2
SMS : SURFACE MOUNT W/ SIDE GAUGE
The SMS (Surface Mount Side gauge) option features the same pump
base as the SM option with a side mounted vacuum gauge (VG20-LM)
for direct interchangeability with brand “V-C” including the mounting
holes and end ports. Refer to the EDCO USA website for a complete
“V-C” to EDCO USA interchange list. EDCO USA pump valves have 4.3
times the area of “V-C” valves for improved efficiency and performance
with any of our six nozzle series (A, E, L, M, ML, or X).
2.40
2.40
[60.8]
[60.8]
2A
1
3
1.71
[43.4]
1.71
[43.4]
0.0
0.0
2
2
Optional Non-Return
9:12
1.48 [37.6]
1.48 [37.6]
0.0
0.0
2
2A
9
CLASSIC PUMPS
RELEASE CHECK VALVE
The quick release check valve is used to admit a burst of compressed air into
the vacuum pump base to quickly release a work piece and to momentarily
reverse flow through the vacuum filter elements to provide a cleaning
action. One 3-position exhaust center 4-way valve, or two separate air
valves can be used to alternately supply compressed air to the vacuum
pump and RC release check.
NOTE: This page is for information purposes only. Order pump and Release
Check Valve separately. RC18A can be found on page 4:7. For full pump
dimensions, see page 9:5.
PUMP ON
2A
PUMP AIR
SUPPLY
QUICK
RELEASE
4
9
1
3
1A
2A
QUICK RELEASE
AIR SUPPLY, 5 psi
MINIMUM
2A
2A
2
Optional Non-Return
1.63
[41.4]
1
CODE
1
1A
2
2A
3
4
1A
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Air Supply - Quick Release
1.63
[41.4]
1.41
[35.8]
1.63 1.63
[41.4] [41.4]
1.41 1.41
[35.8] [35.8]
1.63
[41.4]
1.41
[35.8]
NPT
1/4 NPTF
M5X0.8 (10-32)
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G 1/8 NPSF
G
G 1/4
M5X0.8 (10-32)
G 3/4
G 1/8 NPSF
G 3/4
G 1/8 NPSF
2A
4
9:13
2
3
CLASSIC PUMPS
RT : TIME QUICK RELEASE
Automatically admits an adjustable 0 to 5 second burst of compressed air
into the vacuum pump base to quickly release a work piece whenever the
pump air supply is turned off. A 60 to 100 psi (4.14 - 6.89 bar) maintained
air supply to port 4 (Air Supply- Quick Release) is required.
Option suffix -RTA — RT option mounted on A-side.
Option suffix -RTB — RT option mounted on B-side.
For full pump dimensions, see page 9:5.
Weight: 0.57 lbs [259.0 g]
2A
1
3
4
4
1A
2A
2A
5
2A
2.43 [61.8] REF
1.96 [49.8]
2
Optional Non-Return
Pilot signal for duration of release pulse.
Can be used for part ejection circuit.
B
SIDE
1.961.96
[49.8]
[49.8]
2.43 [61.8] REF
1.38 [35.0]
2.432.43
[61.8]
[61.8]
REFREF
0.68 [17.1]
0.0
0.0
A
SIDE
0.63 [16.0] 9
1.96 [49.8]
0.630.63
[16.0]
[16.0]
CODE
1
1A
2
2A
3
4
5
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Air Supply - Quick Release
Timed Pulse Output
NPT
1/4 NPTF
M5X0.8 (10-32)
3/4 NPTF
G 1/8 NPSF
3/4 NPTF
G 1/8 NPSF
M5X0.8 (10-32)
5
2.64 [67.1]
2.64 [67.1]
2.64 [67.1]
0.17 [4.3]
0.17 [4.3]
0.0
0.17
0.0 [4.3]
0.0
0.0
4
1.38 [35.0]
1.38 [35.0]
0.68 [17.1]
0.68 [17.1]
1.38 [35.0]
1
0.0 0.0
0.68 [17.1]
0.0
0.0 0.0
0.63 [16.0]
G
G 1/4
M5X0.8 (10-32)
G 3/4
G1 /8 NPSF
G 3/4
G 1/8 NPSF
M5X0.8 (10-32)
2A
9:14
2
3
0.0
1.14
1.39
1.14
1.61
1.39
1.61
0.0
CLASSIC PUMPS
0.0
The stainless steel mounting brackets attach at the
side or end of any basic Classic vacuum pump. Straight
(ML-BKT-180) and Right Angle (ML-BKT-90) versions
are available for many mounting possibilities. Dual
hole patterns provide attachment to both metric and
0.0 0.0
inch structural framing extrusion T-slots. Brackets
and fastener kits must be ordered separately.
1.161.16
[29.5]
[29.5]
ML-BKT-180
1.421.42
[35.9]
[35.9]
1.631.63
[41.4]
[41.4]
1 Straight Mounting Bracket
0.220.22
[5.5][5.5]
0.180.18
[4.6][4.6]
0.0
1 Right Angle Mounting Bracket
Side
Mount
1.16 [29.5]
1.42 [35.9]
1.63 [41.4]
9
KIT
ML-M4-E1
ML-M4-E2
2.75 [69.9]
2.15 [54.6]
1.58 [40.1]
1.051.05
26.726.7
0.840.84
21.221.2
0.580.58
14.714.7
0.620.62
15.615.6
1.05 [26.7]
0.84 [21.2]
25-100 (X40-X160)
0.58 [14.7]
125-200 (X200-X320)
0.0
1.58 [40.1]
1.72 [43.7]
2.75 [69.9]
0.22 [5.5]
0.18 [4.6]
1.311.31
33.133.1
[26.7]
1.051.05
[26.7]
[21.2]
0.840.84
[21.2]
[14.7]
0.580.58
[14.7]
0.0 0.0
1.581.58
[40.1]
[40.1]
1.721.72
[43.7]
[43.7]
2.752.75
[69.9]
[69.9]
End
Mount
2.752.75
[69.9]
[69.9]
2.152.15
[54.6]
[54.6]
1.581.58
[40.1]
[40.1]
ML-BKT-90
1.14 [28.8]
1.39 [35.3]
1.61 [40.8]
BASIC CLASSIC PUMP MOUNTING BRACKETS
0.0 0.0
1.31
33.1
CAPACITY
CONTENTS
0.62
15.6
M4X10 (2) & M4X30 (2)
M4X10 (2) & M4X50 (2)
ML-M4-S1
25-100 (X40-X160)
M4X50 (2) & M4 Nut (2)
ML-M4-S2
125-200 (X200-X320)
M4X70 (2) & M4 Nut (2)
1.05 26.7
0.84 21.2
0.58 14.7
0.0
BASIC CLASSIC PUMP DIRECT INTERCHANGE MOUNTS
CP : CLASSIC MOUNT
6.23
[158.1]
6.23
[158.1]
Top Side
2.81
2.81
[71.3]
[71.3]
3.37
3.37
[85.5]
[85.5]
A Side
B Side
Port Side
0.22
0.22
[5.5]
[5.5]
3.37
3.37
[85.6]
[85.6]
0.22
[5.6]
0.22
[5.6]
9:15
CLASSIC PUMPS
SP : SIDE MOUNT
The SP Option directly interchanges with the brand “P” MLD series mounting dimensions.
Specify Gauge & Mounting Position:
To mount on the A-side with the gauge readable at position “3”, add suffix -A3SP to the pump model code.
-
A
A
B
GAUGE
POSITION
3
1
2
3
4
0.75
0.75
[19.1]
[19.1]
SP
0.75
0.75
[19.1]
[19.1]
7.50[190.5]
[190.5]
7.50
7.26[184.3]
[184.3]
7.26
6.88[174.8]
[174.8]
6.88
“4”
A Side
“2”
Select
a Basic
Classic
Pump
SIDE
“1”
PUMP
MODEL
ML50N
B Side
“3”
0.62[15.7]
[15.7]
0.62
0.25[6.2]
[6.2]
0.25
0.0
0.0
Weight: 0.40 lbs [181.0 g]
M5X0.8
4 Places
9
FP : FACE MOUNT
The FP Option directly interchanges with the brand “P” MLD series mounting dimensions.
Specify Gauge & Mounting Position:
To mount gauge readable at position “3” with M5X0.8 threads, add suffix -3FP to the pump model code.
To mount gauge readable at position “3” with 1/4-20 UNC threads, add suffix -3FP-14 to the pump model code.
2.50 [63.5] 2.50 [63.5]
2.13 [54.1] 2.13 [54.1]
1.93 [49.0] 1.93 [49.0]
THREADS
FP
FP = M5X0.8
FP-14 = 1/4-20 UNC
0.25
[6.4]
0.25
[6.4]
“4”
“2”
Select
a Basic
Classic
Pump
GAUGE
POSITION
3
1
2
3
4
“1”
PUMP
MODEL
ML50N
7.01
7.01
[178.1]
[178.1]
“3”
7.50
6.26
7.50
6.26
[190.5] [159.0]
[190.5] [159.0]
Weight: 0.44 lbs [200.0 g]
9:16
Ø0.22 [5.6] Thru M5X0.8 or 1/4-20
4 Places
4 Places
CLASSIC PUMPS
6010 BASE : 1” PORTS W/ COAXIAL EJECTORS
1” Vacuum and Exhaust ports at opposite ends of the base.
The pump is controlled via air supply through the inlet port.
Vacuum gauge, silencer, and full-length T-slot are included.
2A
1.58
1.58
1.58[40.1]
[40.1]
[40.1]
3
2
0.0
0.60 [15.2]
1.58 [40.1]
Optional
Non-Return
2A
9:17
1.23
1.23[31.1]
[31.1]
0.0
0.0
6.05
6.05
[153.7]
[153.7]
1.23
[31.1]
1.23
[31.1]
4.92
4.92[125.0]
[125.0]
0.0
0.0
0.0
1.23 [31.1]
0.81
0.81[20.5]
[20.5]
4.92
4.92 [125.0]
[125.0]
1.42
1.42[36.1]
[36.1]
6.05 [153.7]
[153.7]
6.05
2.92
2.92[74.2]
[74.2]
10.17
10.17[258.3]
[258.3]
5.83
5.83[148.1]
[148.1] 5.83
5.83[148.1]
[148.1]
10.17
10.17 [258.3]
[258.3]
5.83
5.83 [148.1]
[148.1]
10.17 [258.3]
0.0
0.0
6.05 [153.7]
0.94 [23.9]
1.51
1.51
[38.2]
[38.2]
5.83
5.83 [148.1]
[148.1]
0.0
0.0
0.60 [15.2]
0.60 [15.2]
1.58 [40.1]
1.58 [40.1]
1.51
1.51
1.51
[38.2]
[38.2]
[38.2]
0.0
0.0
0.22
0.22[5.6]
[5.6]
2.92 [74.2]
[74.2]
2.92
2.02 [51.2]
2.02 [51.2]
1.51
[38.2]
0.0
0.0
0.0
0.0
0.0 [148.1]
5.83
0.22
0.22[5.6]
[5.6]
0.0
0.0
0.0
3A
2A 0.60
0.60
0.60[15.2]
[15.2]
[15.2]
2A
0.0
0.0
0.45 [11.3]
0.45 [11.3]
0.94
[23.9]
0.94
0.94[23.9]
[23.9]
5.83 [148.1]
X
40
80
120
160
200
240
280
320
0.0
0.0
0.22
0.22 [5.6]
[5.6]
2.02
2.02
2.02[51.2]
[51.2]
[51.2]
WEIGHT
“A”
lb (g)
in [mm]
2.43 [1102] 0.0
2.69 [68.3]
2.430.45
[1102][11.3]
2.69 [68.3]
2.43 [1102]
2.69 [68.3]
2.43 [1102]
2.69 [68.3]
3.022.02
[1370][51.2]
3.40 [86.4]
3.02 [1370]
3.40 [86.4]
3.02 [1370]
3.40 [86.4]
3.02 [1370]
3.40 [86.4]
4.92 [125.0]
0.0
0.0
0.81 [20.5]
[20.5]
0.81
1.42
1.42 [36.1]
[36.1]
NPT
G
1/4 NPTF
G 1/4
1 NPSF
G1
G 1/8 NPSF
G 1/8 NPSF
0.0
0.0
3/4 NPSF
G0.0
3/4
0.45
0.45
0.45
[11.3]
[11.3]
G 1/8 NPSF
G[11.3]
1/8
NPSF
2.92 [74.2]
0.0
0.81 [20.5]
1.42 [36.1]
1.23
1.23[31.1]
[31.1]
1.57 [39.9]
1.09 [27.7]
0.49 [12.4]
0.0
0.0
0.0
1.57 [39.9]
1.57
1.09 [39.9]
[27.7]
1.09 [27.7]
0.49 [12.4]
0.49 [12.4]
0.0
0.0
0.0
0.22 [5.6]
1
1.57[39.9]
[39.9]
1.57
1.57
[39.9]
1.09[27.7]
[27.7]
1.09
1.09
[27.7]
0.49[12.4]
[12.4]
0.49
0.49
[12.4]
0.0
0.0
0.0
0.0
0.0
0.22
0.22 [5.6]
[5.6]
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
2.46
2.46[62.5]
[62.5]
0.0
0.0
1.23
1.23 [31.1]
[31.1]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
Exhaust - Alternate
A
A
A
3
3A
AAA
0.0
0.22 [5.6]
CODE
1
2
2A
3
3A
1.09 [27.7]
1.09
0.94 [27.7]
[23.9]
0.94 [23.9]
0.0
0.0
0.0
9
2.46 [62.5]
1.09 [27.7]
0.94 [23.9]
0.0
1.23 [31.1]
2.46
2.46 [62.5]
[62.5]
1.09
1.09
1.09[27.7]
[27.7]
[27.7]
0.94
0.94
0.94[23.9]
[23.9]
[23.9]
0.0
0.0
0.0
1
0.0
2
0.94
0.94
0.0
0.0
CLASSIC PUMPS
6034 BASE : 3/4” PORTS W/ COAXIAL EJECTORS & SIDE PORTS
3/4” Vacuum and Exhaust ports at opposite ends of the base
plus on one side. The pump is controlled via air supply through
the inlet port. Vacuum gauge, silencer and full-length T-slot
are included.
2A
4.12
4.12
[104.6]
[104.6]
5.83[148.1]
[148.1]
5.83
5.83[148.1]
[148.1]
5.83
0.0
0.0
0.60 [15.2]
0.60 [15.2]
1.58 [40.1]
1.58 [40.1]
2A
9:18
1.23
1.23[31.2]
[31.2]
0.0
0.0
1.23 [31.2]0.0
0.0
0.0
4.92
4.92[125.0]
[125.0]
1.23
[31.2]
1.23
1.23 [31.2]
[31.2]
6.05
6.05[153.7]
[153.7]
0.0
2.92
2.92[74.2]
[74.2]
0.81
0.81
[20.5]
[20.5]
6.05
[153.7]
6.05
[153.7]
6.05
[153.7]
1.42
1.42
[36.1]
[36.1]
2.92
[74.2]
2.92 [74.2]
[74.2]
2.92
4.92 [125.0]
0.81 [20.5]
0.0
0.0
1.42 [36.1]0.0
0.0
0.81
[20.5]
0.81 [20.5]
[20.5]
0.81
1.42
[36.1]
1.42
[36.1]
1.42
[36.1]
2.92
[74.2]
1.23
1.23[31.2]
[31.2]
0.0
0.94
0.94
0.94[23.9]
[23.9]
[23.9]
0.94 [23.9]
0.0
0.0
0.0
0.0
2.02 [51.2]
2.02 [51.2]
3
Optional
Non-Return
3
4.12
4.12
4.12
4.12[104.6]
[104.6]
[104.6]
1.51
[104.6]
1.51
1.51
1.51
1.51
[38.2]
1.51 [38.2]
[38.2]
[38.2]0.0
[38.2]
0.0
[38.2]0.45 [11.3]
0.45 [11.3]
3
0.0
0.0
0.0
0.0[15.2]
0.60
0.60
0.60
[15.2]
[15.2]
0.60 [15.2]
1.58
1.58
1.58[40.1]
[40.1]
[40.1]
1.58 [40.1]
3
5.83 [148.1]
0.0
0.0
0.22[5.6]
[5.6]
0.22
5.83
[148.1]
5.83
5.83 [148.1]
[148.1]
2
A
A
1.57 [39.9]
1.57
1.09 [39.9]
[27.7]
1.09 [27.7]
0.49 [12.4]
0.49 [12.4]
0.0
0.0
0.0
0.22 [5.6]
0.0
0.0
0.0
0.22
[5.6]
0.22 [5.6]
[5.6]
0.22
2A
2
G
G 1/4
G 3/4
G 1/8 NPSF
G 3/4
WEIGHT
“A”
0.0
0.0
0.0
lb [g] 0.45
in
[mm]
0.45
0.45
[11.3]
[11.3]
[11.3]
0.0
2.58
[1170]
0.45
[11.3]2.69 [68.3]
2.58 [1170]
2.69 [68.3]
2.58 [1170]2.02
[68.3]
2.02
2.022.69
[51.2]
[51.2]
[51.2]
2.02
[51.2]2.69 [68.3]
2.58
[1170]
3.17 [1438]
3.40 [86.4]
3.17 [1438]
3.40 [86.4]
3.17 [1438]
3.40 [86.4]
3.17 [1438]
3.40 [86.4]
X
40
80
120
160
200
240
280
320
1
NPT
1/4 NPTF
3/4 NPSF
G 1/8 NPSF
3/4 NPSF
2
5.83 [148.1]
0.0
0.0
0.22
[5.6]
0.22
[5.6]
5.83
[148.1]
5.83
5.83 [148.1]
[148.1]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
SERIES
A, E, L, M, ML
25
50
75
100
125
150
175
200
2.46
2.46[62.5]
[62.5]
0.0
0.0
0.0
1.23 [31.2]
[31.2]
0.0
1.23
1.23 [31.2]
AAA
A
1.57[39.9]
[39.9]
1.57
[39.9]
1.09 [27.7] 1.57
1.09
[27.7]
1.09
1.09
[27.7]
[27.7]
1.09
[27.7]
1.57
[39.9]
0.94 [23.9]
1.09 [27.7]
0.94 [23.9]
0.49
[12.4]
0.49
0.49
[12.4]
[12.4]
0.0
0.0
0.0
0.49
0.0[12.4] 0.0
0.0
0.0
0.22 [5.6]
0.0
0.0
0.0
0.22
[5.6]
0.22
0.22 [5.6]
[5.6]
CODE
1
2
2A
3
2.46
[62.5]
1.23
[31.2]
2.46
2.46 [62.5]
[62.5]
2.46 [62.5]
1.09
1.09
[27.7]
1.09[27.7]
[27.7]
1.09 [27.7]
0.94
0.94
[23.9]
0.94[23.9]
[23.9]
0.94 [23.9] 0.0
0.0
0.0
0.0
1
6.05
[153.7]
4.92
[125.0]
4.92
[125.0]
0.0
0.0
4.92
[125.0]
2
9
CLASSIC PUMPS
MINI-CLASSIC PUMPS W/ 1/2” PORTS
PUMP
SERIES
ML
A
E
L
M
ML
X
SEAL
MATERIAL
N
N = Nitrile
V = Viton
SIZE
50
25
50
X SIZES
40
80
PORTS
-12
G
(Blank) = NPTF
G = G Threads
1.51
[38.2]
1.51 1.51
[38.2][38.2]
0.36 [9.0]
0.0
0.36 [9.0]
0.0
NPTF
1/4 NPTF
1/2 NPTF
G 1/8 NPSF
1/2 NPTF
0.74 [18.8]
1.48 [37.6]
0.0
0.0 0.0
1.47 [37.3]
0.0
0.74 [18.8]
0.74
0.0 [18.8]
0.74 [18.8]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
0.0
0.36 [9.0]
0.36 [9.0]
0.0 0.0
0.0
1.48 [18.8]
[37.6]
1.48 [37.6]
0.74
CODE
1
2
2A
3
1.48 [37.6]
1.48 [37.6]
9
1.47 [37.3]
1.47 [37.3]
0.36 [9.0]
0.0
0.0
0.0
1.47 [37.3] 2A
1
1.47 [37.3]
1.51
[38.2]
0.0
G
G 1/4
G 1/2
G 1/8 NPSF
G 1/2
4.12 [104.6]
Optional Non-Return
0.74 [18.8]
1.32 [33.4]
9:19
4.85 [123.2]
5.42 [137.7]
4.85 [123.2] 5.60
4.85 [142.2]
[123.2]
4.85 [123.2]
5.42 [137.7] 5.42 [137.7]
5.42 [137.7]
5.60 [142.2] 5.60 [142.2]
5.60 [142.2]
3.54 [89.9]
3.54 [89.9]
2.78
2.78 [70.6]
3.54 [70.6]
[89.9]
2
3.54 [89.9]
2A
4.12 [104.6]
2.78 [70.6]
2
0.0
2A
0.74
0.0[18.8]
0.0
0.17 [4.2]
0.17 [4.2]
1.32 [33.4]
0.74 [18.8]
0.74 [18.8]
M4X0.7
4
Places
1.32 [33.4]
1.32 [33.4]
0.0
0.17 [4.2]
1.82 [46.2]
1.82 [46.2]
2.78 [70.6]
0.0
0.17 [4.2]
0.0
3
1.82 [46.2]
1
1.00 [25.3]
1.21 [30.7]
2A
0.0
0.0
1.00 [25.3]
1.21 [30.7]
1.00
1.00 [25.3]
1.82 [25.3]
[46.2]
1.21 [30.7]
1.21 [30.7]
4.12 [104.6]
4.12 [104.6]
Ø 0.18 [4.6] Thru
4 Places
0.0
0.17 [4.2]
0.74 [18.8]
1.32 [33.4]
3
CLASSIC PUMPS
MINI-CLASSIC PUMPS W/ 1/2” PORTS
SEAL
MATERIAL
N
N = Nitrile
V = Viton
SIZE
100
75
100
X SIZES
120
160
BASE
-12
(Blank) = NPTF
G = G Threads
1.90 [48.3]
2A
1.90 [48.3]
1.90 [48.3]
1.51
[38.2]
1.51
[38.2]
1.51
[38.2]
1.90 [48.3]
G
G 1/4
G 1/2
G 1/8 NPSF
G 1/2
Optional Non-Return
1.32 [33.4]
0.74 [18.8]
1.32 [33.4]
9:20
4.85
4.85
[123.2]
[123.2]
5.42
5.42
[137.7]
[137.7]
5.60
[142.2]
5.60
[142.2]
0.0
1.82
[46.2]
0.00.0
2.78
[70.6]
1.00
1.00
[25.3]
[25.3]
1.21
1.21
[30.7]
[30.7]
3.54
[89.9]
1.82
1.82
[46.2]
[46.2]
2A
0.0
0.17 [4.2]
0.74 [18.8]
4.85 [123.2]
5.42 [137.7]
5.60 [142.2]
2
4.12 [104.6]
3.54 [89.9]
2A
1.82 [46.2]
0.74 [18.8]
1.00 [25.3]
1.21 [30.7]
0.0
0.17 [4.2]
0.0
0.17 [4.2]
0.0
0.17[18.8]
[4.2]
0.74
0.74 [18.8]
1.32 [33.4]
1.32 [33.4]
M4X0.7
4 Places
0.0
0.17 [4.2]
0.0
0.0
3
1.00 [25.3]
1.21 [30.7]
2A
2.78
2.78
[70.6]
[70.6]
4.85 [123.2]
5.42 [137.7]
3.54
3.54
[89.9]
[89.9]
5.60 [142.2]
4.12 [104.6]
4.12 [104.6]
4.12 [104.6]
1
0.0
0.0
0.0
0.74 [18.8]
0.36 [9.0]
0.0
1.48 [37.6]
0.0
1.90 [48.3]
0.0
2.78 [70.6]
0.74 [18.8]
NPTF
1/4 NPTF
1/2 NPTF
G 1/8 NPSF
1/2 NPTF
0.36 [9.0]
0.0
0.36 [9.0]
0.0 0.0
9
1.51 [9.0]
0.36
[38.2]
0.0
0.0
0.74
0.74
[18.8]
[18.8]
0.0
1.48
1.48
[37.6]
[37.6]
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
1.48 [37.6]
CODE
1
2
2A
3
0.74 [18.8]
1.48 [37.6]
0.36 [9.0]
0.0
0.00.0
1
1.32 [33.4]
2
3
Ø 0.18 [4.6] Thru
4 Places
1.00 [25.3]
PUMP
SERIES
ML
A
E
L
M
ML
X
CLASSIC PUMPS
DUAL BASE PUMPS
Dual-base pumps incorporate our "classic" pump modules in a very
compact and cost-effective package. As always, our modular pump design
allows field expansion of capacity, is fully repairable, and is available in all
10.23 (260)
five nozzle series.
6.1 (155)
Both NPTF and BSPP bases are available. Refer to pump model code.
-0.4
-10
-0.2
0
BAR
100 X KPA
-5
1
Specifications & performance data on pages 9:30 – 9:36.
-15
0.6
"Hg
D
SERIES
SIZE
ML
A
E
L
M
ML
MLEN
X
200
200
300
400
X Sizes
320
480
640
SEAL
PORTS
MATERIAL
N
E
(Blank) = NPTF
N
G = G Threads
S G3/4 NPS
V1 EXHAUST,
VH2 4 PLACES
-
NON
RETURN
NR
(Blank) = No
NR = Yes
10.22 [259.6]
1
2A
9
3.0
(76.2)
3.40
3.40
3.40
[86.4]
[86.4]
[86.4]
2A
1.19
[30.1]
5.7
(145)
3.40
[86.4]
6.10 [154.9]
10.22
[259.6]
10.22
[259.6]
10.22 [259.6]
6.10
[154.9]
6.10
[154.9]
6.10 [154.9]
1.19
1.19
1.19
[30.1]
[30.1]
[30.1]
CODE
1
2
2A
3
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
SERIES
A, E, L, M, ML
200
300
400
X
320
480
640
3
NPT
G 1/2 NPSF
G 1-1/2 NPTF
G 1/8 NPSF
G 3/4 NPSF
WEIGHT
lb [kg]
6.75 [3.1]
7.28 [3.3]
7.81 [3.5]
G
G 1/2 NPSF
G 1-1/2 NPTF
G 1/8 NPSF
G 3/4 NPSF
A DIMENSION
in [mm]
4.97 [126.2]
5.68 [144.3]
6.39 [162.3]
1.51
[38.2]
1.51
1.51
1.51
[38.2]
[38.2]
[38.2]
A
5.70 [144.8]
2.88
2.88
[73.2]
[73.2]
2.88 [73.2]
5.70
5.70
[144.8]
[144.8]
5.70 [144.8]
2
NR- OPTIONAL
3
2A
3.05
3.05
3.05
[77.5]
[77.5]
[77.5]
2.88 [73.2]
3
9:21
M5X0.8
4 Places
3.05
[77.5]
3.40
[86.4]
3.40
3.40
A A 3.40
[86.4]
[86.4]
A
[86.4]
2A
1
2
CLASSIC PUMPS
TRIPLE & QUAD BASE PUMPS
T
T = Triple Base
Q = Quad Base
ML
A
E
L
M
ML
MLEN
X
200
Triple
200
300
400
500
600
700
800
900
Quad
400
800
900
1000
1100
1200
X Triple
320
480
640
800
1120
1280
1440
X Quad
640
1280
1440
1600
1760
1920
SEAL
MATERIAL
N
E
N
S
V1
VH2
PORTS
OPTIONS
-
(Blank) = NPTF
G = G Threads
NR
(Blank) = Basic
CE = Collected Exhaust
NR = Non-Return Valve
0.0
SIZE
0.0
9
1.17 29.7
10.52 267.2
0.0
1.51 38.4
Z
2.95 74.9
1.48 37.5
0.0
9:22
0.0
0.88 22.2
SERIES
0.71 18
0.0
BASE
1
4.63 (118)
5.95 (151)
TRIPLE BASE PUMP
0.0
Basic pump assembly has an air supply bypass plate for
"A"on/off air supply to the pump base inlet port.
control via
Includes air pressure gauge and vacuum gauge.
0.88
0.88
0.88 22.2
22.2
22.2
CLASSIC PUMPS
0.0
0.0
0.0 22.2
0.88
0.86
(22)
1
1
1
0.0
0.0 0.0
7.92
Non-Return
(201)
1.17
29.7
NR =
Valve is installed between the base 1.171.17
29.729.7
and the primary ejector cavity and is used to prevent
"B"
cross flow between two vacuum pumps connected to
the same system. A quick release option should always
be considered whenever the NR option is specified since
the vacuum can no longer dissipate through the ejector
7.92
201.2
201.2
7.927.92
201.2
nozzle. Do"C"not use NR to trap vacuum in a system where
the pumps are off and load holding safety is involved.
"A'
"A' "A'
1.32 (33.5)
"B"
"B" "B"
6 PLACES
Z
3
"C" "C"
"C"
-0.2
-30
100 X KPA
140
11
0
0.15
0.150.15
3.9
3.9 3.9
2A
2A 2A
0
BAR
100 X KPA
16
40
10
2
PSI
38.4
1.511.51
38.438.4
1.51
8
120
6
4
inHg
100
20
9
80
60
0
BAR
-5
-25
-0.4
-1
2.95
(75)
0.0
0.0 0.0
-10
-20
-15
-0.6
-0.8
2
Z
Z Z
2.95
74.9
2.952.95
74.974.9
2A
1.48
37.5
1.481.48
37.537.5
10.56 268.3
3
3
"B"
3
3
0.0 0.0
0.0
3
X
X
NPTF
3/4 NPTF
2 NPTF
G 1/8 NPSF
3/4 NPTF
X
2A
101.1
101.1
3.983.98
101.1
3.98
2
2
G
G 3/4
G2
G 1/8 NPSF
G 3/4
Size 300 (X480) Weight = 13.9 lbs [6.3 kg]
For Larger sizes: Add 0.37 lbs [0.16 kg] per pump module.
2
2
9:23
3.00 76.1
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
+
3.00
3.00 76.1
76.1
3.00
76.1
CODE
1
2
2A
3
3
0.0
0.0
0.0
200 - 300
400 - 600
700 - 900
"C"
0.0
PUMP SIZE
Z DIMENSION
in [mm]
3.03 [76.9]
4.42 [112.3]
5.13 [130.3]
3
3
10.56
10.56
10.56 268.3
268.3
268.3
5.95
5.95
5.95 151.1
151.1
151.1
3
5.95 151.1
3.50
3.50
3.50 88.9
88.9
88.9
3.50 88.9
"A"
0.0
0.0
0.0
NR - OPTIONAL
3 PLACES
1
0.71
0.71
0.710.0
18
18
18
0.71 18
0.0
0.0 0.0
QUAD BASE PUMP
"A"
0.0
"B"
NR = Non-Return Valve is installed between the base and the
primary ejector cavity and is used to prevent cross flow between
10.52
two vacuum pumps
connected to the same system or to allow NR
(267)
equipped pump stations to be cycled on/off (PV). A quick release
"C"
option should always be considered whenever the NR option is
specified since the vacuum can no longer dissipate through the
ejector nozzle. Do not use NR to trap vacuum in a system where
the pumps are off and load holding safety is involved.
1.17
1.17
1.17
1.17
0.0
0.0 0.0
0.0
29.7
0.0
29.7
29.7
1.17 29.7
29.7
0.88 22.2
Basic Pump assembly has an air supply bypass plate for control
via on/off air supply to the pump base inlet port. Includes air
pressure gauge and vacuum gauge.
0.88 22.2
CLASSIC PUMPS
0.00.0
0.00.0
4.63 (118)
5.95 (151)
0.88
0.88
0.88
22.2
0.88
22.2
22.2
22.2
0.0
0.86 (22)
1
1
1
1
1
1
0.0
10.52 267.2
10.52 10.52
267.2 267.2
10.52
267.2
1.17 29.7
10.52 267.2
"D"
10.52 267.2
1.32 (33.5)
NR - OPTIONAL
3 PLACES
1
"A"
3
0.15
3.9
3
"B"
0.0
3
3
0.0
3
"C"
+
2
G
G 3/4
G2
G 1/8 NPSF
G 3/4
Size 400 (X640) Weight = 18.4 lbs [8.3 kg]
For Larger sizes: Add 0.37 lbs. [0.16 kg] per pump module.
9:24
2.93 74.4
NPTF
3/4 NPTF
2 NPTF
G 1/8 NPSF
3/4 NPTF
X
2A
2.93
74.4
2.93
2.93
2.93
74.4
74.4
74.4
X
0.0
X
2.93 74.4
FUNCTION
Air Supply
Vacuum - Main
Vacuum - Alternate
Exhaust
5.26 133.6
5.26 133.6
133.6
5.26
5.26 133.6
5.26 133.6
0.00.0
0.00.0
CODE
1
2
2A
3
5.26 133.6
3
"D"
0.0
400
500 - 800
900 - 1200
Z DIMENSION
in [mm]
0.76 [19.3]
1.47 [37.3]
2.18 [55.3]
0.0
3
3
PUMP SIZE
0.0
0.0
0.0
9
10.56 268.3
0.71 18
0.0
0.0
2A
10.56
10.56
10.56
268.3
268.3
268.3
10.56
268.3
2A
Z
Z
74.9
Z
Z
74.9
Z 74.9
2.95
74.9
74.9
37.5
37.5
1.48 37.5
37.5
37.5
0.0
0.0
0.0 0.0
0.0
2A
10.56 268.3
2
2.95
2.95
2.95
Z
2.95
1.48
2.95 74.9
1.48
1.48
1.48 37.5
1.48
0.15
0.15
3.9 0.15
0.15
3.9
0.15
3.9 3.9
3.9
5.95 151.1
0
16
0
PSI
2A
2A
2A
2A
3.50 88.9
20
10
11
BAR
100 X KPA
1.51 38.4
140
8
0.0
0.0
38.4
38.4
38.4
1.51 38.4
38.4
151.1
151.1
151.1
151.1
5.95
5.95
5.95
5.95
120
4
40
inHg
100
6
2
BAR
100 X KPA
1.51
1.51
1.51
0.0
1.51
0
-30
80
60
-0.2
0.0
0.0
0.0
3.50
3.50
3.50
88.9
3.50
88.9
88.9
88.9
-1
2.950
(75)
-0.4
-0.8
-5
-25
-0.6
-10
-20
-15
5.95 151.1
8 PLACES
3
Z
0.71
0.71
0.71
18
0.71
18
1818
0.00.0
0.00.0
0.7188.9
18
3.50
0.0
"D"
CLASSIC PUMPS
TRIPLE & QUAD BASE PUMP OPTIONS
CE : CAPTURE EXHAUST
To specify, add suffix "CE" to pump model code.
Use with 3" (75MM) I.D. hose.
2.96 [75.2]
2.96 [75.2]
TRIPLE BASE
Weight: 1.00 lbs [0.4 kg]
2.96 [75.2]
9
QUAD BASE
Weight: 1.30 lbs [0.6 kg]
9:25
CLASSIC PUMPS
HOW TO USE PERFORMANCE GRAPHS
VACUUM FLOW-RATE
When pump size, operating pressure, and desired vacuum
level are known:
Example:
ML75 Pump @ 72 psi Air Pressure
1. From the performance graph, read the flow index at the
intersection of the performance curve with selected
vacuum level line.
2. Multiply flow index by pump scale to get SCFM flow rate
at selected vacuum level.
What is the vacuum flow rate at 6 inHG?
3. At intersection of 6 inHG and 72 psi, flow index = 4.1
4. Pump Scale = 3 for size 75 pumps.
5. Vacuum Flow = 4.1 X 3 = 12.3 SCFM
AIR CONSUMPTION
When pump size and operating pressure are known:
1. From the lower chart, read the consumption index next
to the air supply pressure.
2. Multiply air consumption by pump scale to get SCFM air
consumption.
Example:
ML75 Pump @ 72 psi Air Pressure
3. Consumption index = 3.5 at 72 psi
4. Pump Scale = 3 for size 75 pumps.
5. Vacuum Flow = 3.5 X 3 = 10.5 SCFM
SELECT A PUMP
When vacuum flow rate at a particular level is known:
1. From the performance graph, read the flow index at the
intersection of the performance curve with selected
vacuum level line.
2. Divide required flow rate by the flow index to obtain a
minimum pump scale.
3. Refer to the pump scale chart to select the next larger
pump size. This is the smallest pump that will produce the
required flow rate at the desired vacuum level.
Example:
System requires 3.3 SCFM at 15 inHG with 60 psi pump
operating pressure.
4. At intersection of 15 inHG and 60 psi, flow index = 1.0
5. Minimum Pump Scale = 3.3 / 1 = 3.3
6. From the Pump Scale chart, the next larger pump scale
is 4, which is a size 100 pump that will flow 4 SCFM at
15 inHG for 21% extra capacity. Depending on system
variables such as porosity, a larger factor of safety may
be desirable.
SYSTEM EVACUATION TIME
1. Calculate the total system volume in cubic inches by
adding together the internal volumes of all system
components.
2. From the chart, find the evacuation time index for
the require system vacuum level at the desired pump
operating pressure.
3. Multiply the time index by pump scale X 1000 to obtain
system evacuation time in seconds.
Example:
For a system volume of 120 in3, a vacuum level of 15 inHG, and
ML50 pump at 72 psi:
4. From charts, Pump Scale = 2, Evacuation Time Index =
6.6
5. Time = 120 X 6.6 / 2 X 1000 = 0.4 seconds
PUMP SPECIFICATIONS
General:
Material:
Maximum air supply pressure - 100 psi
Weight - See individual pump pages.
Sound Pressure Level • ML = 60 - 65 dBA
• TML & QML = 70 - 75 dBA
Structural parts:
• 6061 Anodized Aluminum
• Stainless Steel Fasteners
Valve Plates - Type 304 Stainless Steel
Ejectors - CA360 Brass Nozzles, Delrin Plugs
Silencers - PVC, Urethane
9:26
9
CLASSIC PUMPS
Vacuum Flow Index (scfm/pump scale)
PERFORMANCE
8
Vacuum Flowrate vs. Vacuum Level
for EDCO USA
ML-series Pumps
87
72
7
60
6
Graphed data was obtained from actual EDCO
pump tests and should be representative of
production pumps in the series.
Tests were performed at 29.9 inHg barometric
pressure and your local barometric pressure
will affect pump performance proportionately.
5
4
When comparing EDCO vacuum pumps
to other brands, please conduct your
own tests. We have found that their
catalog data often overstates
performance and understates
air consumption.
3
9
72
2
87
60
1
0
ML
Scale
25
1
87
60
0
3
50
2
75
3
6
100
4
125
5
12
9
150
6
175
7
200
8
300
12
15
400
16
18
500
20
600
24
21
24
27
Vacuum Level (inHg)
700
28
800
32
900
36
1000
40
1100
44
1200
48
SCFM X 28.32 = nl / m
EVACUATION TIME - SEC / 100 CU IN
AIR
SUPPLY
PSI
87
72
60
CONSUMPTION
INDEX
SCFM
4.0
3.5
3.0
MAX
VACUUM
inHG
27.5
26.8
23.6
SECONDS TO EVACUATE 100 in3 TO VACUUM LEVEL
3 inHG
0.35
0.36
0.39
6 inHG
0.87
0.93
1.1
9 inHG
1.7
1.9
2.9
12 inHG
3.3
3.8
4.3
sec / 100 cu in X 0.61 = sec / l
9:27
15 inHG
5.9
6.6
7.5
18 inHG
10.2
11.4
12.9
21 inHG
18.4
20.2
29.3
24 inHG
35.8
39.5
-
26 inHG
64
70
-
CLASSIC PUMPS
9
Vacuum Flowrate vs. Vacuum Level
for EDCO USA
A, E, M, L and X-series Pumps
8
Graphed data was obtained from actual EDCO
pump tests and should be representative of
production pumps in the series.
Tests were performed at 29.9 inHg barometric
pressure and your local barometric pressure
will affect pump performance proportionately.
5N
A2
@
7
87
0@
X4
PS
I
P
87
SI
6
5@
M2
E2
5@
SI
P
49
Vacuum Flow Index (scfm/pump scale)
PERFORMANCE
87
5
When comparing EDCO vacuum pumps
to other brands, please conduct your
own tests. We have found that their
catalog data often overstates
performance and understates
air consumption.
PS
I
L25
@
87
4
I
PS
9
3
2
1
0
0
A, E, L, M
X
Scale
3
25
40
1
50
80
2
6
75
120
3
100
160
4
125
200
5
15
12
9
150
240
6
175
280
7
200
320
8
300
480
12
18
400 500
640 800
16
20
21
600
960
24
700
1120
28
24
27
Vacuum level (inHg)
800
1280
32
900 1000 1100 1200
1440 1600 1760 1820
36
40
44
48
SCFM X 28.32 = nl / m
PUMP
Series
A
E
L
M
X
AIR
SUPPLY
PSI
87
87
87
49
87
CONSUMPTION
MAX
INDEX
VACUUM
SCFM
inHG
6.8
27.1
6.8
26.7
4.0
22.8
4.3
27.1
5.4
28.3
SECONDS TO EVACUATE 100 in3 TO VACUUM LEVEL
3 inHG
0.31
0.4
0.44
0.48
0.4
6 inHG
0.75
0.99
1.04
1.18
1.0
9 inHG
1.4
1.8
1.9
2.3
2.0
12 inHG
2.5
3.0
3.6
4.2
3.6
15 inHG
4.3
5.09
6.34
7.36
6.4
18 inHG
7.4
8.7
10.8
12.7
11.1
21 inHG
13.2
15.6
19.3
22.5
19.6
24 inHG
25.6
30.6
43.7
38
26 inHG
45
56
77
67
sec / 100 cu in X 0.61 = sec / l
9:28
CLASSIC PUMPS
PERFORMANCE
VACUUM FLOW - SCFM
MODEL
9
E25
E50
E75
E100
E125
E150
E175
E200
E300
L25
L50
L75
L100
L125
L150
L175
L200
L300
M25
M50
M75
M100
M125
M150
M175
M200
M300
ML25
ML50
ML75
ML100
ML125
ML150
ML175
ML200
ML300
X40
X80
X120
X160
X200
X240
X280
X320
X480
AIR
SUPPLY
PSI
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
49
49
49
49
49
49
49
49
49
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
AIR
CONS.
SCFM
6.8
13.6
20.4
27.2
34.0
40.8
47.6
54.4
81.6
4.0
8.0
12.0
16.0
20.0
24.0
28.0
32.0
48.0
4.3
8.6
12.9
17.2
21.5
25.8
30.1
34.4
51.6
4.0
8.0
12.0
16.0
20.0
24.0
28.0
32.0
48.0
5.4
10.8
16.2
21.6
27.0
32.4
37.8
43.2
64.8
MAX
VACUUM
inHG
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
SCFM AT VACUUM LEVEL (inHG)
3 inHG
6.24
12.5
18.7
25.0
31.2
37.4
43.7
49.9
74.9
5.57
11.1
16.7
22.3
27.9
33.4
39.0
44.6
66.8
5.32
10.6
16.0
21.3
26.6
31.9
37.2
42.6
63.8
7.17
14.3
21.5
28.7
35.9
43.0
50.2
57.4
86.0
6.33
12.7
19.0
25.3
31.7
38.0
44.3
50.6
76
6 inHG
5.44
10.9
16.3
21.8
27.2
32.6
38.1
43.5
65.3
4.63
9.26
13.9
18.5
23.2
27.8
32.4
37.0
55.6
4.05
8.1
12.2
16.2
20.3
24.3
28.4
32.4
48.6
5.12
10.2
15.4
20.5
25.6
30.7
35.8
41.0
61.4
4.89
9.78
14.7
19.6
24.5
29.3
34.2
39.1
58.7
9 inHG
4.67
9.34
14.0
18.7
23.4
28.0
32.7
37.4
56.0
3.15
6.30
9.45
12.6
15.8
18.9
22.0
25.2
37.8
2.55
5.1
7.65
10.2
12.8
15.3
17.9
20.4
30.6
2.91
5.82
8.73
11.6
14.6
17.5
20.4
23.3
34.9
2.73
5.46
8.19
10.9
13.7
16.4
19.1
21.8
32.8
12 inHG
3.3
6.6
9.9
13.2
16.5
19.8
23.1
26.4
39.6
1.8
3.6
5.4
7.2
9.0
10.8
12.6
14.4
21.6
1.24
2.48
3.72
4.96
6.2
7.44
8.68
9.92
14.9
1.27
2.54
3.81
5.08
6.35
7.62
8.89
10.2
15.2
1.4
2.8
4.2
5.6
7.0
8.4
9.8
11.2
16.8
15 inHG
1.98
3.96
5.94
7.92
9.9
11.9
13.9
15.8
23.8
1.37
2.74
4.11
5.48
6.85
8.22
9.59
11.0
16.4
0.9
1.8
2.7
3.6
4.5
5.4
6.3
7.2
9.72
0.84
1.68
2.52
3.36
4.2
5.04
5.88
6.72
10.1
0.9
1.8
2.7
3.6
4.5
5.4
6.3
7.2
10.8
SCFM X 28.32 = nl / m
9:29
18 inHG
0.6
1.2
1.8
2.4
3.0
3.6
4.2
4.8
7.2
1.06
2.12
3.18
4.24
5.3
6.36
7.42
8.48
12.7
0.61
1.22
1.83
2.44
3.05
3.66
4.27
4.88
7.32
0.51
1.02
1.53
2.04
2.55
3.06
3.57
4.08
6.12
0.61
1.22
1.83
2.44
3.05
3.66
4.27
4.88
7.32
21 inHG
0.29
0.58
0.87
1.16
1.45
1.74
2.03
2.32
3.48
0.74
1.48
2.22
2.96
3.7
4.44
5.18
5.92
8.88
0.38
0.76
1.14
1.52
1.9
2.28
2.66
3.04
4.56
0.34
0.68
1.02
1.36
1.7
2.04
2.38
2.72
4.08
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
6.0
24 inHG
0.11
0.22
0.33
0.44
0.55
0.66
0.77
0.88
1.32
0.15
0.3
0.45
0.6
0.75
0.9
1.05
1.2
1.8
0.16
0.32
0.48
0.64
0.8
0.96
1.12
1.28
1.92
0.33
0.66
0.99
1.32
1.65
1.98
2.31
2.64
3.96
26 inHG
0.012
0.024
0.036
0.048
0.06
0.072
0.084
0.096
0.14
0.03
0.06
0.09
0.12
0.15
0.18
0.21
0.24
0.36
0.06
0.12
0.18
0.24
0.3
0.36
0.42
0.48
0.72
0.15
0.3
0.45
0.6
0.75
0.9
1.05
1.2
1.8
27 inHG
0.017
0.034
0.051
0.068
0.085
0.102
0.119
0.136
0.2
0.067
0.134
0.201
0.268
0.335
0.402
0.469
0.536
0.8
CLASSIC PUMPS
PERFORMANCE
MODEL
E25
E50
E75
E100
E125
E150
E175
E200
E300
L25
L50
L75
L100
L125
L150
L175
L200
L300
M25
M50
M75
M100
M125
M150
M175
M200
M300
ML25
ML50
ML75
ML100
ML125
ML150
ML175
ML200
ML300
X40
X80
X120
X160
X200
X240
X280
X320
X480
AIR
SUPPLY
PSI
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
49
49
49
49
49
49
49
49
49
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
AIR
CONS.
SCFM
6.8
13.6
20.4
27.2
34.0
40.8
47.6
54.4
81.6
4.0
8.0
12.0
16.0
20.0
24.0
28.0
32.0
48.0
4.3
8.6
12.9
17.2
21.5
25.8
30.1
34.4
51.6
4.0
8.0
12.0
16.0
20.0
24.0
28.0
32.0
48.0
5.4
10.8
16.2
21.6
27.0
32.4
37.8
43.2
64.8
MAX
VACUUM
inHG
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
SECONDS TO EVACUATE 1 ft3 TO VACUUM LEVEL
3 inHG
0.7
0.35
0.23
0.18
0.14
0.12
0.1
0.088
0.058
0.8
0.4
0.27
0.2
0.16
0.13
0.11
0.1
0.07
0.83
0.42
0.28
0.21
0.17
0.14
0.12
0.1
0.069
0.6
0.3
0.2
0.15
0.12
0.1
0.086
0.075
0.05
0.69
0.35
0.23
0.17
0.14
0.12
0.1
0.086
0.058
6 inHG
1.7
0.85
0.57
0.43
0.34
0.28
0.24
0.21
0.14
1.9
0.95
0.63
0.48
0.38
0.32
0.27
0.24
0.16
2.03
1.02
0.68
0.51
0.41
0.34
0.29
0.25
0.17
1.51
0.76
0.5
0.38
0.3
0.25
0.22
0.19
0.13
1.71
0.86
0.57
0.43
0.34
0.29
0.24
0.21
0.14
9 inHG
3.1
1.55
1.03
0.79
0.62
0.52
0.44
0.39
0.26
3.7
1.85
1.23
0.93
0.74
0.62
0.53
0.46
0.31
3.96
1.98
1.32
0.99
0.79
0.66
0.57
0.5
0.33
3.04
1.52
1.01
0.76
0.61
0.51
0.43
0.38
0.25
3.38
1.69
1.13
0.85
0.68
0.56
0.48
0.42
0.28
12 inHG
5.23
2.62
1.74
1.31
1.05
0.87
0.75
0.65
0.44
6.6
3.3
2.2
1.65
1.32
1.1
0.94
0.83
0.55
7.23
3.62
2.41
1.81
1.45
1.21
1.03
0.9
0.6
5.7
2.85
1.9
1.43
1.14
0.95
0.81
0.71
0.48
6.21
3.11
2.07
1.55
1.24
1.04
0.89
0.78
0.52
15 inHG
8.8
4.4
2.93
2.2
1.76
1.47
1.26
1.1
0.73
12.3
6.15
4.1
3.08
2.46
2.05
1.76
1.54
1.03
12.7
6.35
4.23
3.18
2.54
2.12
1.81
1.59
1.06
10.2
5.1
3.39
2.54
2.03
1.69
1.45
1.27
0.85
11.0
5.5
3.67
2.75
2.2
1.83
1.57
1.38
0.92
18 inHG
15.0
7.5
5.0
3.75
3.0
2.5
2.14
1.88
1.25
19.0
9.5
6.3
4.75
3.8
3.17
2.71
2.38
1.58
21.9
11.0
7.3
5.48
4.38
3.65
3.13
2.74
1.83
17.7
8.85
5.9
4.43
3.54
2.95
2.53
2.21
1.48
19.1
9.6
6.37
4.8
3.8
3.18
2.73
2.39
1.59
21 inHG
27.0
13.5
9.0
6.75
5.4
4.5
3.86
3.38
2.25
33.2
16.6
11.1
8.3
6.64
5.53
4.74
4.15
2.77
38.8
19.4
12.9
9.7
7.76
6.47
5.54
4.85
3.23
31.8
15.9
10.6
7.95
6.36
5.3
4.54
3.98
2.65
33.9
17.0
11.3
8.48
6.78
5.65
4.84
4.24
2.83
24 inHG
52.8
26.4
17.6
13.2
10.6
8.8
7.54
6.6
4.4
75.4
37.7
25.1
18.9
15.1
12.7
10.8
9.43
6.28
61.8
31.0
20.6
15.5
12.4
10.3
8.84
7.74
5.16
65.6
32.8
21.9
16.4
13.4
10.9
9.37
8.2
5.47
26 inHG
93.7
46.9
31.2
23.4
18.7
15.6
13.4
11.7
7.81
134
67.0
44.7
33.5
26.8
22.3
19.1
16.8
11.2
110
55.0
36.7
27.5
22.0
18.3
15.7
13.8
9.17
116
58.0
38.7
29.0
23.2
19.3
16.6
14.5
9.6
27 inHG
159
79.5
53.0
39.8
31.8
26.5
22.7
19.9
13.3
167
83.5
55.7
41.8
33.4
27.8
23.9
20.9
13.9
sec / 100 cu in X 0.61 = sec / l
9:30
9
CLASSIC PUMPS
PERFORMANCE
VACUUM FLOW - SCFM
AIR
SUPPLY
PSI
E400
87
E500
87
E600
87
E700
87
E800
87
E900
87
E1000
87
E1100
87
E1200
87
L400
87
L500
87
L600
87
L700
87
L800
87
L900
87
L1000
87
L1100
87
L1200
87
M400
49
M500
49
M600
49
M700
49
M800
49
M900
49
M1000
49
M1100
49
M1200
49
ML400
87
ML500
87
ML600
87
ML700
87
ML800
87
ML900
87
ML1000
87
ML1100
87
ML1200
87
X640
87
X800
87
X960
87
X1120
87
X1280
87
X1440
87
X1600
87
X1760
87
X1920
87
MODEL
9
AIR
CONS.
SCFM
109
136
163
190
218
245
272
299
326
64
80
96
112
128
144
160
176
192
68.8
86
103
120
138
155
172
189
206
64
80
96
112
128
144
160
176
192
86.4
108
130
151
173
194
216
238
259
MAX
VACUUM
inHG
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
SCFM AT VACUUM LEVEL (inHG)
3 inHG
99.8
125
150
175
200
225
250
275
300
89.1
111
134
156
178
201
223
245
267
85.1
106
128
149
170
192
213
234
255
114
143
172
201
229
258
287
315
344
101
127
152
177
203
228
253
279
304
6 inHG
87
109
131
152
174
196
218
240
262
74.1
92.6
111
130
148
167
185
204
222
64.8
81
97.2
113
130
146
162
178
194
81.9
102
123
143
164
184
205
225
246
78.2
97.8
117
137
156
176
196
215
235
9 inHG
74.7
93.4
112
131
149
168
187
205
224
50.4
63.
75.6
88.2
101
113
126
139
151
40.8
51
61.2
71.4
81.6
91.8
102
112
122
46.6
58.2
69.8
81.5
93.1
105
116
128
140
43.7
54.6
65.5
76.4
87.4
98.3
109
120
131
12 inHG
52.8
66
79.2
92.4
106
119
132
145
158
28.8
36
43.2
50.4
57.6
64.8
72
79.2
86.4
19.8
24.8
29.8
34.7
39.7
44.6
49.6
54.6
59.5
20.3
25.4
30.5
35.6
40.6
45.72
50.8
55.9
61
22.4
28
33.6
39.2
44.8
50.4
56
61.6
67.2
15 inHG
31.7
39.6
47.5
55.4
63.4
71.3
79.2
87.1
95
21.9
27.4
32.9
38.4
43.8
49.3
54.8
60.3
65.8
14.4
18
21.6
25.2
28.8
32.4
36
39.6
43.2
13.4
16.8
20.2
23.5
26.9
30.2
33.6
37
40.3
14.4
18
21.6
25.2
28.8
32.4
36
39.6
43.2
SCFM X 28.32 = nl / m
9:31
18 inHG
9.6
12
14.4
16.8
19.2
21.6
24
26.4
28.8
17
21.2
25.4
29.7
33.9
38.2
42.4
46.6
50.9
9.76
12.2
14.6
17.1
19.5
22.0
24.4
26.8
29.3
8.16
10.2
12.2
14.3
16.3
18.4
20.4
22.4
24.5
9.76
12.2
14.6
17.1
19.5
22
24.4
26.8
29.3
21 inHG
4.64
5.8
6.96
8.12
9.28
10.4
11.6
12.8
13.9
11.8
14.8
17.8
20.7
23.7
26.6
29.6
32.6
35.5
6.08
7.6
9.12
10.6
12.2
13.7
15.2
16.7
18.2
5.44
6.8
8.2
9.5
10.9
12.2
13.6
15
16.3
8
10
12
14
16
18
20
22
24
24 inHG
1.76
2.2
2.6
3.08
3.52
3.96
4.4
4.84
5.3
2.4
3
3.6
4.2
4.8
5.4
6
6.6
7.2
2.56
3.2
3.84
4.48
5.12
5.76
6.4
7.04
7.68
5.3
6.6
7.92
9.24
10.6
11.9
13.2
14.5
15.8
26 inHG
0.19
0.24
0.29
0.34
0.38
0.43
0.48
0.53
0.58
0.48
0.6
0.72
0.84
0.96
1.08
1.2
1.32
1.44
0.96
1.2
1.44
1.68
1.92
2.16
2.4
2.64
2.88
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
27 inHG
0.27
0.34
0.41
0.48
0.54
0.61
0.68
0.75
0.82
1.07
1.34
1.61
1.88
2.14
2.41
2.68
2.95
3.22
CLASSIC PUMPS
PERFORMANCE
AIR
SUPPLY
PSI
E400
87
E500
87
E600
87
E700
87
E800
87
E900
87
E1000
87
E1100
87
E1200
87
L400
87
L500
87
L600
87
L700
87
L800
87
L900
87
L1000
87
L1100
87
L1200
87
M400
49
M500
49
M600
49
M700
49
M800
49
M900
49
M1000
49
M1100
49
M1200
49
ML400
87
ML500
87
ML600
87
ML700
87
ML800
87
ML900
87
ML1000
87
ML1100
87
ML1200
87
X640
87
X800
87
X960
87
X1120
87
X1280
87
X1440
87
X1600
87
X1760
87
X1920
87
MODEL
AIR
CONS.
SCFM
109
136
163
190
218
245
272
299
326
64
80
96
112
128
144
160
176
192
68.8
86
103
120
138
155
172
189
206
34
80
96
112
128
144
160
176
192
86.4
108
130
151
173
194
216
238
259
MAX
VACUUM
inHG
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
26.7
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
22.8
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.1
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
28.3
SECONDS TO EVACUATE 1 ft3 TO VACUUM LEVEL
3 inHG
0.044
0.035
0.029
0.025
0.022
0.019
0.018
0.016
0.015
0.05
0.04
0.03
0.029
0.025
0.022
0.02
0.018
0.017
0.052
0.042
0.035
0.03
0.026
0.023
0.021
0.019
0.017
0.038
0.03
0.025
0.021
0.019
0.017
0.015
0.014
0.013
0.043
0.035
0.029
0.025
0.022
0.019
0.017
0.016
0.014
6 inHG
0.11
0.085
0.071
0.061
0.053
0.047
0.043
0.039
0.035
0.12
0.1
0.08
0.07
0.06
0.05
0.048
0.043
0.04
0.13
0.1
0.085
0.073
0.063
0.056
0.051
0.046
0.042
0.094
0.076
0.063
0.054
0.047
0.042
0.038
0.034
0.031
0.11
0.086
0.071
0.061
0.053
0.048
0.043
0.039
0.036
9 inHG
0.19
0.16
0.13
0.11
0.097
0.086
0.078
0.07
0.065
0.23
0.19
0.15
0.13
0.12
0.1
0.09
0.08
0.077
0.25
0.2
0.17
0.14
0.12
0.11
0.1
0.09
0.83
0.19
0.15
0.13
0.11
0.095
0.84
0.76
0.069
0.063
0.21
0.17
0.14
0.12
0.11
0.094
0.085
0.077
0.07
12 inHG
0.33
0.26
0.22
0.19
0.16
0.15
0.13
0.12
0.11
0.41
0.33
0.28
0.24
0.21
0.18
0.17
0.15
0.14
0.45
0.36
0.3
0.26
0.23
0.2
0.18
0.16
0.15
0.36
0.29
0.24
0.2
0.18
0.16
0.14
0.13
0.12
0.39
0.31
0.26
0.22
0.19
0.17
0.16
0.14
0.13
15 inHG
0.55
0.44
0.37
0.31
0.28
0.24
0.22
0.2
0.18
0.77
0.62
0.51
0.44
0.38
0.34
0.31
0.28
0.26
0.79
0.64
0.53
0.45
0.39
0.35
0.32
0.29
0.26
0.64
0.51
0.42
0.36
0.32
0.28
0.26
0.23
0.21
0.69
0.55
0.46
0.39
0.34
0.31
0.28
0.25
0.23
18 inHG
0.94
0.75
0.63
0.54
0.47
0.42
0.38
0.34
0.31
1.19
0.95
0.79
0.68
0.59
0.53
0.48
0.43
0.40
1.37
1.1
0.91
0.78
0.68
0.61
0.55
0.5
0.46
1.12
0.89
0.74
0.63
0.55
0.49
0.44
0.4
0.37
1.19
0.96
0.8
0.68
0.6
0.53
0.48
0.43
0.4
21 inHG
1.69
1.35
1.13
0.96
0.84
0.75
0.68
0.61
0.56
2.08
1.66
1.38
1.19
1.04
0.92
0.83
0.75
0.69
2.43
1.94
1.62
1.39
1.21
1.08
0.97
0.88
0.81
1.99
1.59
1.33
1.14
0.99
0.88
0.8
0.72
0.66
2.12
1.7
1.41
1.21
1.06
0.94
0.85
0.77
0.71
24 inHG
3.3
2.64
2.2
1.89
1.65
1.47
1.32
1.2
1.1
4.71
3.77
3.14
2.69
2.35
2.09
1.89
1.71
1.57
3.87
3.1
2.58
2.21
1.93
1.72
1.55
1.41
1.3
4.1
3.28
2.73
2.34
2.05
1.82
1.64
1.49
1.37
26 inHG
5.86
4.69
3.9
3.35
2.93
2.6
2.34
2.1
2.0
8.38
6.7
5.58
4.79
4.19
3.72
3.35
3.05
2.79
6.88
5.5
4.58
3.93
3.44
3.06
2.75
2.5
2.29
7.25
5.8
4.83
4.14
3.63
3.22
2.9
2.64
2.42
27 inHG
9.94
7.95
6.63
5.68
4.97
4.42
3.98
3.61
3.31
10.4
8.35
6.6
5.96
5.22
4.64
4.18
3.8
3.48
sec / 100 cu in X 0.61 = sec / l
9:32
9

9 - Classic Pumps

Transcription

Similar documents

VRF inverter multi-system Air