SCUFFMASTED pretty.tough.paint.

Transcription

SCUFFMASTED pretty.tough.paint.
design essentials
worldwide
e [email protected]
p 1300 306 399
baresque.com.au
scuffmaster
pretty.tough.paint.
THE INTERIOR DESIGNER’S
DESTINATION
2
1
design essentials
PRETTY.TOUGH.paint.
index
WHAT IS SCUFFMASTER?
You wouldn’t use residential wallcovering for a commercial space, so why use residential paint
for a commercial space? Scuffmaster finishes were designed to exceed the demands of modern
commercial interiors. They’re Earth-friendly, design-friendly and they’re the most durable finishes in
their class.
After all, your designs can stand the test of time, shouldn’t your paint? ASTM D2486 Scrub Resistance Test
Scuffmaster uses the ASTM D2486 Scrub test to demonstrate the durability of our finishes. In this
test, dried paint samples are repeatedly scrubbed with an abrasive brush until the surface of the
paint deteriorates. This determines the number of “scrubs to failure”. The higher the number, the
more durable the paint.
Scuffmaster finishes wildly outperform the competition with ratings of 4000, 8000 and even in
excess of 25,000(!) scrubs compared to an average of 550 for the leading brands.
Paint is a small part of a painting project’s overall cost
80% of most commercial project budgets goes toward preparation and application. Paint is actually
a small factor in a project’s overall cost. Because long lasting, premium paint like ScrubTough can
be scrubbed and cleaned, it requires less repainting saving both time and money.
2
ScrubTough
Armor
Ambient Design
Ambient Metallic
Solid Metal
Microban
04
08
12
16
20
24
3
scuffmaster
scrubtough
scuffmasterscrubtough
WHAT IS scrubtough?
A premium eggshell finish that attracts attention but repels scuffs and stains. ScrubTough’s
durable polyurethane formula withstands regular cleaning and keeps walls looking their best.
ScrubTough is a water based polyurethane-fortified eggshell coating. It is a two component
system that must be crosslinked with Masterlink™ crosslinker immediately prior to application.
ScrubTough can be brushed, rolled or sprayed.
scrubtough FEATURES
Project: university of georgia
4
•
•
•
•
•
8,000 scrubs
Rich, durable eggshell finish
Bleach cleanable
Low VOC (Maximum VOC < 49 g/L)
No upcharge or minimum order for custom colours
5
scrubtough
Project: Mincey marble
Project: university of georgia
scuffmaster scrubtough
SPECificationS
Project: corporate - xfinity
Project: restaurant ricebox
6
Project: corporate
Polyurethane Formulation
Exceptional durability and cleanability
(deep/bright colours require additional
coats)
Easy Colour Customisation
Can match any colour from any fandeck
with no up-charge for custom colours.
Contact Baresque for details - 1300 306 399
Easy Application
Finish can be brushed, rolled or sprayed.
Call Baresque for details and applicators
in your area 1300 306 399.
Waterbased / Low VOC
Low odour spray application meets all
environmental requirements
Maximum VOC < 49 g/L
Warranty
5 Year manufacturer’s warranty against
adhesion failure if product is correctly
applied
System Components
Scrubtough Performance Paint with Microban
Application
Previously Painted Surfaces:
Primer - 1 coat Scuffmaster Primemaster Primer/Sealer may be desirable to extend coverage and/or provide a uniform
sealed surface
Coverage Rates
Approximately 8.6m2 per litre
1-2 coats coat of ScrubTough Performance Paint with Microban (at least 2
coats if bright, deep or dark colour)
For other surfaces see baresque.com.au
Maintenance
Allow product to cure for at least seven
days following application (allow 28 days
on hard, non-absorbent substrates) before applying cleaning chemicals. Most
common stains can be removed using
warm water and detergent. For more difficult stains, dampen a soft white cloth
with a solution of household bleach (1
part bleach to 4 parts water). Rub gently.
Rinse with a water dampened cloth to
remove bleach concentration.
7
scuffmaster
armor
scuffmasterarmor
WHAT IS armor?
Armor’s glistening pattern coat creates a flashy, futuristic look with unrivalled
durability. The raised pattern coat acts like millions of tiny bumpers that
protect walls and surfaces from wear and tear.
Armor is a unique, two-step finish that consists of (a) a base colour coat and (b) a pattern
coat. Armor is the most durable textured interior paint on the market.
armor FEATURES
•
•
•
•
8
+25,000 scrubs
Rich eggshell base with textured pattern coat
Bleach cleanable
No upcharge or minimum order for custom colours
9
armor
Project: raleigh pediatrics
Project: big 8 accounting - coffee shop
scuffmaster armor
SPECificationS
Project: raleigh pediatrics
Project: elder high school
10
Project: floyd primary care - nurse station
Polyurethane Formulation
Exceptional durability and cleanability
provides the pattern for Armor and must
be spray applied.
Easy Colour Customisation
Can match any colour from any fandeck
with no up-charge for custom colours.
Contact Baresque for details - 1300 306 399
Coverage Rates
Base Coat - approximately 7.4m2 per litre
Pattern Coat - approximately 14.8m2 per
litre (standard colours)
Waterbased / Low VOC
Low odour spray application and can be
applied in occupied spaces
Maximum VOC < 108 g/L
Easy Application
Base coat can be rolled or sprayed. Pattern
coat is sprayed. Call Baresque for details
and applicators in your area 1300 306 399.
System Components
BASE COLOUR (a): PremiumCoat 200
provides the base colour for every Armor finish. PremiumCoat 200 can be
brushed, rolled or sprayed.
Warranty
5 Year manufacturer’s warranty against adhesion failure if product is correctly applied
PATTERN COAT (b): ArmorCoat 1200
Application
Previously Painted Surfaces & Primed Metal
Base Coat - 1 coat of Scuffmaster
Premium-Coat 200 (at least 2 coats if
bright or dark colour)
Pattern Coat - Scuffmaster Armor-Coat
1200 applied to match finish standard
For other surfaces see baresque.com.au
Maintenance
Allow product to cure for at least seven
days following application (allow 28 days
on hard, non-absorbent substrates) before applying cleaning chemicals. Most
common stains can be removed using
warm water and detergent. For more difficult stains, dampen a soft white cloth
with a solution of household bleach (1
part bleach to 4 parts water). Rub gently.
Rinse with a water dampened cloth to
remove bleach concentration.
11
scuffmaster
ambient design
scuffmasterambientdesign
WHAT IS ambient design?
Ambient Design begins with an eggshell basecoat in any colour and adds a colourful pattern
coat creating a sophisticated and highly durable textured effect.
ambient design FEATURES
•
•
•
•
8,200 scrubs
Rich eggshell base with textured pattern coat
Bleach cleanable
No upcharge or minimum order for custom colours
Project: junior’s cheesecake
12
13
ambient design
Project: nordstrom
Project: big 8 accounting - reception
ambient design
SPECificationS
Easy Colour Costumisation
Can match any colour from any fandeck
with no up-charge for custom colours.
Contact Baresque for details - 1300 306 399
Waterbased / Low VOC
Low odour spray application and can be
applied in occupied spaces
Maximum VOC < 74 g/L
System Components
Base coat and pattern coat
Coverage Rates
Base Coat - approximately 7.4m2 per litre
Pattern Coat - approximately 19.7m2 per
litre (standard colours)
Project: h2 capital
14
Project: blackberry
Easy Application
Base coat can be rolled or sprayed. Pattern coat is sprayed. Call Baresque for
details and applicators in your area 1300
306 399.
Warranty
5 Year manufacturer’s warranty against
adhesion failure if product is correctly
applied
Application
Previously-Painted
Surfaces/Primed
Metal
Base Coat - 1 coat of Scuffmaster [Master-Coat 100] [Premium-Coat 200] (at
least 2 coats for very dark or bright colours).
Pattern Coat – Scuffmaster PremiumCoat 200 [list finish colour number]
For other surfaces see baresque.com.au
Maintenance
Allow product to cure for at least seven
days following application (allow 28 days
on hard, non-absorbent substrates) before applying cleaning chemicals. Most
common stains can be removed using
warm water and detergent. For more difficult stains, dampen a soft white cloth
with a solution of household bleach (1
part bleach to 4 parts water). Rub gently.
Rinse with a water dampened cloth to
remove bleach concentration.
15
scuffmaster
ambient metallic
scuffmasterambientmetallic
WHAT IS ambient metallic?
Ambient Metallic begins with a rich, eggshell base in any colour and ignites it with a sparkling
metallic pattern coat for a dazzling, light catching effect.
Ambient Metallic is a unique, two-step finish that consists of (a) a base colour coat and (b)
a pattern coat. Because Ambient Metallic is so much stronger than typical paint, it gets
specified for a lot of corporate, education and retail spaces looking for a tough finish with a
pretty twist.
ambient metallic FEATURES
•
•
•
•
16
8,200 scrubs
Rich eggshell base with sparking metallic pattern coat
Bleach cleanable
No upcharge or minimum order for custom colours
17
ambient metallic
Project: torque club
ambient metallic
SPECificationS
Project: danbury hospital - children’s health
Project: jive 5
18
Project: civic opera
Polyurethane Formulation
Significantly more scrub-resistant and
cleanable
PATTERN COAT (b): ArmorCoat 1200M provides the sparkling metallic pattern for Ambient Metallic and must be spray applied.
Easy Colour Customisation
Can match any colour from any fandeck
with no up-charge for custom colours.
Contact Baresque for details - 1300 306 399
Coverage Rates
Base Coat - approximately 7.4m2 per litre
Pattern Coat - approximately 19.7m2 per
litre (standard colours)
Waterbased / Low VOC
Low odour spray application and can be
applied in occupied spaces
Maximum VOC < 74 g/L
Easy Application
Base coat can be rolled or sprayed. Pattern coat is sprayed. Call Baresque for
details and applicators in your area 1300
306 399.
System Components
BASE COLOUR (a): MasterCoat 100
provides the base colour for every Ambient Metallic finish. It must be applied
following the directions on the can label.
Airless equipment recommended for this
step only.
Warranty
5 Year manufacturer’s warranty against
adhesion failure if product is correctly
applied
Application
Previously-Painted Surfaces/Primed Metal:
Base Coat - 1 coat of Scuffmaster Master-Coat 100 (at least 2 coats for very
dark or bright colours)
Pattern Coat – Scuffmaster Armor-Coat
1200M [list finish colour number]
For other surfaces see baresque.com.au
Maintenance
Allow product to cure for at least seven
days following application (allow 28 days
on hard, non-absorbent substrates) before applying cleaning chemicals. Most
common stains can be removed using
warm water and detergent. For more difficult stains, dampen a soft white cloth
with a solution of household bleach (1
part bleach to 4 parts water). Rub gently.
Rinse with a water dampened cloth to
remove bleach concentration.
19
scuffmaster
solid metal
scuffmastersolidmetal
WHAT IS Solid metal?
Solid Metal imbues colour with a radiance no other finish can match. But it’s more than just
a pretty face, Solid Metal also gives your walls industry leading durability.
Solid Metal is a metallic finish that consists of a base metallic colour coat and a protective
clear coat. There are thousands of colours available that have a depth and radiance that can’t
be created with ordinary paint. Its radiant metallic base colour is protected with a clear coat
that’s available in flat, satin, or gloss.
Solid metal FEATURES
•
•
•
•
20
4,200 scrubs
Elegant and sophisticated Metallic
Bleach cleanable
No upcharge or minimum order for custom colours
21
solid metal
Project: Mincey Marble
Project: Sky ute casino
solid metal
SPECificationS
Ultra-Clear Polyurethane Clear Coat
Very scrub-resistant and cleanable
Easy Colour Costumisation
Thousands of colours available
No up-charge for custom colours.
Contact Baresque for details - 1300 306 399
Waterbased / Low VOC
Low odour spray application and can be
applied in occupied spaces
Maximum VOC < 130 g/L
Project: emerson one
22
System Components
(Pre-Base Coat is required in certain applications)
BASE COLOUR (a): MetalliCoat 2000
(MC2000) provides the metallic base
coat for Solid Metal.
CLEAR COAT (b): Ultra Clear clear coat
seals the surface and protects the Base
Coat. It is available in three sheens, flat,
satin and gloss.
Coverage Rates
Pre Base-Coat - approximately 7.4 m2 per litre
Base Coat - approximately 4.9m2 per litre
Pattern Coat - approximately 9.8m2 per
litre (one coat)
Easy Application
Solid Metal is a spray applied finish. May be
sprayed HVLP or by conventional air spray.
Natural variation (lighter or darker areas)
in installed finish is a characteristic of the
product. Call Baresque for details and applicators in your area. 1300 306 399
Warranty
5 Year manufacturer’s warranty against
adhesion failure if product is correctly
applied
Application
Previously-Painted Surfaces/Ceramic Tile/
Primed Metal: Primer – 1 coat of Scuff-
master Primemaster [Bonding Primer;
Primer/Sealer]
Base Coat - 1 coat of Scuffmaster Metalli-Coat 2000 (applied in 4-5 light passes)
Clear Coat - 1 coat Scuffmaster UltraClear [Satin] [Gloss]
For other surfaces see baresque.com.au
Maintenance
Allow product to cure for at least seven
days following application (allow 28 days
on hard, non-absorbent substrates) before applying cleaning chemicals. Most
common stains can be removed using
warm water and detergent. For more difficult stains, dampen a soft white cloth
with a solution of household bleach (1
part bleach to 4 parts water). Rub gently.
Rinse with a water dampened cloth to
remove bleach concentration.
23
microban
microbanprotection
WHAT IS microban Protection?
All the previous Scuffmaster products contain Microban antimicrobial product protection.
This unique additive will inhibit the growth of stain and odour causing bacteria, mould,
mildew, and other fungal growth on the dried paint film. Microban protection provides an
added level of protection between cleanings, but does not take the place of normal cleaning
and disinfecting procedures and will not protect users or others against food-borne illness.
Microban additives are E.P.A. registered for use in paint. For more information on Microban,
please visit www.microban.com.
Project: Raleigh pediatrics
24
25
design essentials
THE INTERIOR DESIGNER’S
DESTINATION
26
27