trellis hardware

TRELLIS HARDWARE
When Quality & Service Matter ...
Trellis Hardware
Guy Wire & Fittings
Pole Hardware
Earth Anchoring Systems
Phone (800) 431-3095
www.fehr.com/trellis
Fax (888) 352-1790
Volume 2 Copyright 2014 Fehr Bros. Industries Inc. 895 Kings Highway, Saugerties NY 12477
Product Index
Aircraft Cable............................................ 4
Cable Fittings
Aluminum Sleeves......................................5
Aluminum Stops........................................5
Thimbles Heavy Duty.................................5
Cable Accessories
Cable Cutters............................................ 11
Swaging Tools.......................................... 11
Cable Sleeves & Stops..................................5
Guy Strand
Common Grade..........................................2
Guy Strand Coils........................................2 EHS (Extra High Strength)..........................2
Guy Strand Dead Ends................................3
Guy Strand Splices......................................3
Guy Strand Tensioners................................3
Kwik-Locks................................................. 7
Splices....................................................... 3
Dead Ends.................................................. 3
Malleable Wire Rope Clips.........................13
Drop Forged Clips......................................13
Swaging Tools............................................ 11
Earth Anchors
Scrubs Hand Cleaner Towels...................... 11
Tensioners.................................................. 3
Arrowheads................................................8
Helix.........................................................9
Driving Rods..............................................8
Eye Bolts...................................................10
Washers....................................................10
Turnbuckles...............................................12
Gripples
Thimbles.................................................... 5
Dynamic Grippples.....................................6
Gripple Plus...............................................6
Gripple Single Channel...............................6 Gripple “T” Clip..........................................7 Gripple Tensioning Tools.............................7
Wire Rope Clips........................................13
Visit www.fehr.com for Terms & Condtions
Phone: 800-431-3095
Fax: 888-352-1790
email: [email protected]
www.fehr.com/trellis
895 Kings Hwy
Saugerties, NY 12477
Fehr Bros. Industries Inc.
Call us today
at 800-431-3095 and our
courteous Sales Service Staff
will setup an online account for you
or visit fehr.com and register
for business to business access.
Guy Strand
•
•
•
•
EHS Guy Strand Cable Part #
2G1E187- (length)
2G1E250- (length)
2G1E312- (length)
2G1E375- (length)
Guy Strand Part #
2G1C125- (length)
2G1C187- (length)
2G1C250- (length)
2G1C312- (length)
Product
Information
Type
1x7
1x7
1x7
1x7
Diameter
3/16”
1/4”
5/16”
3/8”
Class A Galvanized, meets ASTM A 475
Coils include dispenser cage.
Use guy strand dead ends & splices.
Left hand lay.
Extra High Strength
Break
Strength (lbs)
3,990
6,650
11,200
15,400
Coil
250’
250’
200’
150’
Reel
5,000’
5,000’
5,000’
5,000’
Coil
250’
250’
250’
250’
Reel
5,000’
5,000’
5,000’
5,000’
Common Grade
Type
1x7
1x7
1x7
1x7
Diameter
1/8”
3/16”
1/4”
5/16”
Break
Strength (lbs)
540
1,150
1,900
3,200
• Class A Galvanized, meets ASTM A 475.
• Easily hand spliceable (can be wrapped by
hand around a thimble).
• Left Hand Lay.
Common Grade
2
Phone: 800-431-3095 • Fax: 888-352-1790
Dead Ends & Splices
Guy Strand Tensioners
Part #
GST187
GST250
GST312
Strand Size
3/16”
1/4”
5/16”
Wt (lbs)/Ea
.45
.56
1.20
GST375
3/8”
1.53
•R
ated to hold a minimum of 90% of
RBS for strand used.
• Terminate overhead or down guy wire.
• Universal Bale design.
Guy Strand Splices
•R
ated to hold a minimum of 90% of
RBS for strand used.
• Splice 2 pieces of like strand.
Part #
GSS187
GSS250
GSS312
Strand Size
3/16”
1/4”
5/16”
Wt (lbs)/Ea
.40
.51
.80
GSS375
3/8”
1.20
Dead Ends
Part #
TG187
TG250
TG312
Strand Size
3/16”
1/4”
5/16”
Wt (lbs)/Ea
.15
.25
.55
TG375
3/8
.90
•U
sed to form termination on the end of EHS
guy strand.
• Use of heavy duty thimbles with Dead Ends
required by ANSI A300.
www.fehr.com
3
Cable
Galvanized Aircraft Cable
7x7
Diameter
1/16"
3/32"
1/8"
3/32"
1/8"
5/32"
3/16"
1/4"
5/16”
3/8”
Type
7x7
7x7
7x7
7 x 19
7 x 19
7 x 19
7 x 19
7 x 19
7 x 19
7 x 19
Part#
2G7062
2G7093
2G7125
2G9093
2G9125
2G9156
2G9187
2G9250
2G9312
2G9375
Breaking
Strength (lbs)
480
920
1,700
1,050
2,000
2,800
4,200
7,000
9,800
14,400
Wt (lbs)/
1000 Ft
8
16
28
17
29
45
65
111
173
243
Stainless Steel Aircraft Cable
7 x 19
Diameter
1/16"
3/32"
1/8"
1/8"
3/16"
1/4"
5/16”
3/8"
Type
7x7
7x7
7x7
7 x 19
7 x 19
7 x 19
7 x 19
7 x 19
Part#
2S7062
2S7093
2S7125
2S9125
2S9187
2S9250
2S9312
2S9250
Breaking
Strength (lbs)
480
920
1,700
1,760
3,700
6,400
9,000
12,000
Product
Information
Type 304
Wt (lbs)/
1000 Ft
8
16
28
29
65
110
173
243
• Available
on 250’, 500’,
1,000’, 2,500’ and
5,000’ reels.
Correct
4
Phone: 800-431-3095 • Fax: 888-352-1790
Incorrect
Cable Accessories
Aluminum Sleeves & Stops
Sleeves
Stops
Safety
Alert
Part
Number
ASL062
ASL093
ASL125
ASL156
ASL187
ASL250
ASL312
ASL375
Part
Number
AST062
AST093
AST125
AST156
AST187
AST250
AST312
Wt (lbs)/
100 Pcs
.08
.33
.63
.84
1.60
2.50
3.60
5.90
.12
.28
.25
.44
.38
1.90
1.60
Options
•A
vailable in 100 and 1,000
pc bags.
• Also available in Copper,
Zinc Plated Copper and
Stainless Steel.
• See swaging tools on page 11.
•S
leeves when properly applied, are capable of holding the
rated breaking strength of the cable.
• Stops, when properly applied are capable of holding only 1/3
to 1/2 of the rated strength of the cable to which they are
applied.
Thimbles
Heavy Duty Galvanized
Part#
THD187
THD250
THD312
THD375
THD500
Cable
Size
1/16"
3/32"
1/8"
5/32"
3/16"
1/4"
5/16”
3/8”
Cable
Size
1/16"
3/32"
1/8"
5/32"
3/16"
1/4"
5/16”
Size
3/16”
1/4"
5/16"
3/8"
1/2"
Wt (lbs)/
100 Pcs
3.6
6.2
11.5
14.2
57.0
www.fehr.com
•O
ther sizes and grades available
(AN-Type & Standard Duty).
5
Gripple Tensioners
Gripples®
Gripple Wire/Cable Tensioners allow both in-line splicing,
looping and end terminations utilizing locking ceramic
rollers with stainless steel springs for maximum outdoor
performance.
• Use for trellising, fencing, netting and anchoring.
• Can be used with strand, cable hardwire, barbed wire
and monofilament.
• Adjustable, may be retensioned as needed.
Dynamic Gripple Part #
GD4
GD6
lock and unlock with hex key
Cable Size
5/32” 1x19 & 3/16” 7x19
1/4” 7x7 & 7x19
Maximum Load
1,650 lbs
3,850 lbs
Gripple Plus Part #
GPLUS-SM
GPLUS-M
GPLUS-L
GD4
corrosion resistant
Cable Size
1/16” - 17-13 Ga
1/8” - 14-10 Ga
5/32” - 10-7.5 Ga
Maximum Load
600 lbs
880 lbs
1,320 lbs
GRIPPLE -PLUS
Gripple Single Channel Part #
GP1
GP2
Cable Size
1/8” - 15-11 Ga
5/32” - 7.5-5 Ga
end terminations
Maximum Load
880 lbs
1,320 lbs
GP1
6
Phone: 800-431-3095 • Fax: 888-352-1790
Kwik-Locks
Gripple T-Clip Part #
T-Clip
T-Clip 2
fence wire termination
Wire Ga
1/8” - 14-10 Ga
1/16” - 15 Ga
Barbed Wire
15-1/2 Ga
14 Ga
•U
p to 5 times faster than knotting.
• Ideal for awkward, tight spaces particularly
horse fencing.
• Simple twist and push fit - ideal for use with very
hard wires where knotting is cumbersome.
• Neat professional finish.
• Two sizes available for both stock fencing or
barbed wire applications.
Gripple Tensioning Tools
Part #
GT-Tool
GC-Tool
GT-TOOL
GC-TOOL
• The
Gripple Torque Tensioning Tool allows you to
tension wire up to 880 lbs with minimal effort due
to the 6:1 gear drive mechanism.
• Accomodates wire or cable up to 1/4”.
• Internal torque gauge controls the load applied to
the wire, allowing for consistent tension.
• Measures from 220 lbs to 660 lbs.
• Easy to use and lightweight.
•
•
•
•
Capacity
1/16”- 3/16” Cable
1/4 Cable
Features
Torque Gauge
All Steel
• The
Contractor Tool is strong robust and
built for contractors.
• All metal construction for added durability
and strength.
• 10:1 mechanical advantage helps you apply
the same tension with less effort
• Gear driven, long handles for increased
leverage.
• Quick release cam to position the tool easily
on the wire.
• Soft moulded ergonomic grips for added
comfort.
eatherproof Zinc Alloy.
W
Easily adjustable with exposed pin.
Installs in seconds, re-usable.
UL approved.
KL-TOOL
Kwik-Locks
Part#
KL100
KL150
KL200
KL600
KL-TOOL
Cable & Wire Sizes
W.L.L.
Weight/Ea
1/16" & 3/32"
150
.05
3/32" & 1/8"
225
.13
1/8” & 3/16”
640
.35
1/4”
Available June 2014
Kwik-Lok Tensioning Tool
8.0
www.fehr.com
7
ArrowHead & Bullet Anchors
Arrowhead Anchors
Part #
AA-2
AA-3
AA-4
AA-6
AA-8
AA-10
Soil Class
Anchor Dense Sand
Medium
Loose Medium
Loose Fine
Cable
Width
or Gravel Sandy Gravel to Fine Sand uncompacted Sand
1/8” x 30”
2”
300 lbs
170 lbs
100 lbs
50 lbs
1/8” x 30”
3”
700
450
240
120
3/16” x 36”
4”
1,200
750
400
200
1/4” x 42”
6”
3,000
2,000
1,200
600
5/16” x 48”
8”
6,500
3,500
2,200
1,250
3/8” x 60”
10”
11,000
7,000
4,000
2,400
1
2
3
4
Product
Information
•H
ammer in with drive rod, remove rod, pull
cable to turn anchor.
• Pullout chart “lbs” are approximate and will
vary based on soil type, moisture content
and anchor depth.
• Anchors are available in additional cable
lengths or as uncabled.
Driving Rods
Part #
DR3-750
DR3-750HT
DR3-1
DR4
DR5
DR6
DR7
DR7-1.375
DR8-1.375
DR9
DR10
8
Description
3’ x 3/4” Standard
3’ x 3/4” High Tensile
3’ x 1” Standard
4’ x 1” Standard
5’ x 1” Standard
6’ x 1” Standard
7’ x 1” Standard
7’ x 1-3/8” Standard
8’ x 1-3/8” Standard
9’ x 1-3/8” Standard
10’ x 1-3/8” Standard
Length
3’
3’
3’
4’
5’
6’
7’
7’
8’
9’
10’
Diameter
3/4”
3/4”
1”
1”
1”
1”
1”
1-3/8”
1-3/8”
1-3/8”
1-3/8”
Phone: 800-431-3095 • Fax: 888-352-1790
Helix Anchors
Helix Earth Anchors - Forged/Glavanized
Part #
HELIX4-54
HELIX6-66
HELIX8-66
HELIX10-96
Rod
Helix
Holding Strength (lbs)
Length Diameter Diameter
Normal Soil
54”
.75”
4”
3,000
66”
.75”
6”
5,000
66”
1.00”
8”
9,000
96”
1.25”
10”
10,000
Weight
lbs/Ea
9.0
12.0
19.0
42.0
Helix Earth Anchors - Formed
Part #
HELIX15-3
HELIX30-3
HELIX30-4
HELIX45-6
Rod
Length Diameter
15”
.437”
30”
.437”
30”
.500”
45”
.687”
Finish
Plain
Plain
Plain
Painted
Helix
Holding Strength (lbs)
Diameter
Normal Soil
3”
200
3”
1,500
4”
2,500
6”
4,000
www.fehr.com
Weight
lbs/Ea
1.0
2.0
3.5
7.0
9
Forged Eyebolts
Drop Forged, Hot Galvanized, XL Thread Eyebolts
Part #
EB250X02
EB250X04
EB312X02
EB312X04
EB375X02
EB375X04
EB375X06
EB500X03
EB500X06
EB500X08
EB500X10
EB500X12
EB500X18
EB625X04
EB625X06
EB625X08
EB625X10
EB625X12
EB625X15
EB625X18
EB625X21
EB625X24
EB750X04
EB750X06
EB750X08
EB750X10
EB750X12
EB875X08
EB875X10
EB875X12
Eyebolt Washers -
WLL (lbs)
650
650
1,200
1,200
1,550
1,550
1,550
2,600
2,600
2,600
2,600
2,600
2,600
4,750
4,750
4,750
4,750
4,750
4,750
4,750
4,750
4,750
6,450
6,450
6,450
6,450
6,450
9,500
9,500
9,500
hot galvanized
Part #
WASHER500
O.D.
1.39"
I.D
.55"
WASHER625
1.78"
.70"
10
Size
1/4" x 2"
1/4" x 4"
5/16" x 2"
5/16" x 4-1/4"
3/8" x 2-1/2"
3/8" x 4-1/2"
3/8" x 6"
1/2" x 3-1/4"
1/2" x 6"
1/2" x 8"
1/2" x 10"
1/2" x 12"
1/2" x 18"
5/8" x 4"
5/8" x 6"
5/8" x 8"
5/8" x 10"
5/8" x 12"
5/8" x 15"
5/8" x 18"
5/8" x 21"
5/8" x 24"
3/4" x 4-1/2"
3/4" x 6"
3/4" x 8"
3/4" x 10"
3/4" x 12"
7/8" x 8"
7/8" x 10"
7/8" x 12"
Thickness Wt (lbs)/Ea
.097"
.034
.140"
.080
Phone: 800-431-3095 • Fax: 888-352-1790
Wt (lbs)/Ea
.07
.10
.13
.15
.20
.25
.30
.50
.60
.76
.88
.94
1.25
.95
1.09
1.20
1.40
1.55
1.68
2.00
2.35
2.45
1.40
1.75
2.00
2.20
2.30
2.75
3.18
3.60
Tools
Cutting Tools
Part #
FELCO C-7/RC-8
FELCO C-9/C-12/C-16
RC-450/RC-800
TWRC21B
Cut Max Description
5/32"
Cable Cutter (FELCO)
TFC7
Length Wt (lbs)/Ea
8"
.75
TRC8
3/16”
Cable Cutter (IMPORT)
8”
.75
TFC9
1/4"
Cable Cutter (FELCO)
13"
1.90
THWC9
11/32”
Cable Cutter (IMPORT)
13”
2.00
TRC450
3/8”
Cable Cutter (IMPORT)
18”
3.60
TFC12
3/8”
Cable Cutter (FELCO)
23"
4.75
THWC12
1/2”
Cable Cutter (IMPORT)
20”
3.75
TFC16
5/8”
Cable Cutter (FELCO)
23"
6.00
THWC16
5/8”
Cable Cutter (IMPORT)
26”
5.75
TRC800
5/8”
Cable Cutter (IMPORT)
32"
9.10
TWRC21B
3/8”
Cable - Bench Mount
21"
14.00
THWC9
THWC12
THWC16
Swaging Tools
Part #
Capacity
TSW031-062
1SC (Hand) USA
1BSC (Bench) USA
THSC350 (Hand)
THSC600 (Hand)
THSC600B (Bench)
THS1000 (Hand)
L-250 (Hand)
TSW312 (Hand)
TSW375 (Hand)
TGA-1P
TGA-2P
Length
Wt (lbs)/
Ea
1/32"-1/16"
9"
.75
1/16"-3/16"
26"
6.50
1/16"-3/16"
22.5"
6.60
1/16", 3/32", 1/8"
17"
3.50
1/16"-3/16"
26"
5.50
1/16"-3/16"
22.5"
5.60
5/32”,1/4", 5/16"
30"
19.00
1/4"
28"
5.50
5/16"
28"
5.70
3/8"
26.5"
14.50
Go/No-Go Gauge for 1SC and 1BSC Tools
Go/No-Go Gauge for L250 Tool
TSW031-062
1SC Hand-Held Model
L-250 Hand-Held Model
THSC 600 Hand-Held Model
1BSC Bench Model
THSC 600B Bench Model
Scrubs®
Part#
SCRUBS
Description
Scrubs® Waterless Cleaner Towels
• Packed 6 pails per case.
• Ideal for cleaning dirt and
lubricants from hands
and tools.
www.fehr.com
11
Forged Turnbuckles
Hook/hook
jaw/jaw
eye/Jaw
eye/eye
Turnbuckles -
hook/eye
Drop Forged, Hot Galvanized
WLL (lbs)
Part #
9_ _250x04
9_ _312x04
9_ _375x06
9_ _500x06
9_ _500x09
9_ _500x12
9_ _625x06
9_ _625x09
9_ _625x12
9_ _750x06
9_ _750x09
9_ _750x12
9_ _750x18
9_ _875x12
9_ _875x18
9_ _100x12
Safety
Alert
12
Size x Take-Up
1/4" x 4"
5/16" x 4-1/2"
3/8" x 6"
1/2" x 6"
1/2" x 9"
1/2" x 12"
5/8" x 6"
5/8" x 9"
5/8" x 12"
3/4" x 6"
3/4" x 9"
3/4" x 12"
3/4" x 18"
7/8" x 12"
7/8" x 18"
1" x 12"
Hook/Hook
Hook/Eye
400
Eye/Eye
Jaw/Eye
Jaw/Jaw
500
700
1,000
1,500
1,500
1,500
2,250
2,250
2,250
3,000
3,000
3,000
3,000
4,000
4,000
5,000
800
1,200
2,200
2,200
2,200
3,500
3,500
3,500
5,200
5,200
5,200
5,200
7,200
7,200
10,000
Approx.
Wt (lbs)/
Ea
.30
.55
.90
1.50
2.00
2.20
2.63
3.00
3.25
3.75
4.50
5.75
7.00
8.38
10.25
12.00
•E
ye ends and Jaw ends have a significantly higher WLL than
open Hook ends. Select size based on desired WLL.
• Inspect fittings before use. If worn, distorted or damaged,
discard and replace.
Phone: 800-431-3095 • Fax: 888-352-1790
Wire Rope Clips
Wire Rope Clips
Malleable
ElectroGalvanized
Drop
Forged
Galvanized
Part#
WRCG062
WRCG125
WRCG187
WRCG250
WRCG312
WRCG375
WRCG437
WRCG500
WRCG625
WRCG750
WRCG875
WRCG100
Part#
WRCDF125
WRCDF125-USA
WRCDF187
WRCDF187-USA
WRCDF250
WRCDF250-USA
WRCDF312
WRCDF375
WRCDF437
WRCDF500
WRCDF625
WRCDF750
WRCDF875
WRCDF100
Safety
Alert
Size
1/16"
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
Min#
Clips
Required
3
3
3
3
3
3
4
4
4
5
5
6
Shelf Packed
Pcs/ Wt (lbs)/
Pack
100 pcs.
100
2.2
100
3.6
100
6.4
100
12.0
100
14.0
100
22.0
100
24.0
100
38.0
50
60.0
25
80.0
25
128.0
25
148.0
Bulk Packed
Pcs/ Wt (lbs)/
Bag
Bag
3,000
66
2,500
90
1,500
96
800
96
600
84
500
110
300
72
200
76
100
60
50
40
50
64
50
74
Size
1/8"
1/8"
3/16"
3/16"
1/4"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
Min#
Clips
Required
2
2
2
2
2
2
2
2
2
3
3
4
4
5
Pcs/Pack
10
1
10
1
10
1
10
10
10
10
10
10
10
10
Wt (lbs)/Pack
1.0
0.1
1.0
0.1
2.0
0.2
3.0
5.0
7.0
7.5
10.0
15.0
22.0
25.0
•A
pply wire rope clips correctly. U-bolt should
be on the termination end of rope.
• Retighten clips after intial load.
• Refer to chart for recommended minimum
number of clips required for for each size.
www.fehr.com
Correct Clip Installation for
maximum Rope Strength
13
Drop Forged, Hot Galvanized, XL Thread
www.fehr.com
EHS Guy Strand
Strand Tensioners
Cable
Cable Assemblies
Cable Fittings
Dead Ends
Common Guy Strand
Strand Splices
Arrowhead Anchors
Helical Anchors
Gripples
Kwik Locks
Fehr Bros Industries, Inc.
Eyebolts
Turnbuckles
Drop Forged Clips
Eyebolts
Washers
Tools
Scrubs
895 Kings Hwy, Saugerties, NY 12477
Phone: 800-431-3095 Fax: 888-352-1790 email: [email protected]