TRUFAST® ALUMINUM RETROFIT Roof DRAINS

TRUFAST ALUMINUM RETROFIT Roof DRAINS
®
ALUMINUM DRAINS
TRUFAST aluminum drains feature a 2" (51mm)wide band of high density, expanding foam tape
impregnated with asphalt that is factory applied in a
compressed state around the drain outlet.
Sealant tape is designed to expand to approximately
four times its compressed thickness. Just prior
to inserting the drain, the installer removes the
exterior compression tape and immediately sets the
retrofit drain in place. The released tape gradually
expands to fill the space between the TRUFAST
drain and the existing drain sleeve, making the
connection watertight.
Features
›› A retrofit insert
aluminum drain.
›› Constructed of heavy gauge
spun aluminum.
›› Seals securely within
existing pipe.
TRUFAST
sealant tape expands more slowly in cold
COPPER RETROFIT ROOF
DRAINS
temperatures. When heat is applied to the inside of
the outlet, the sealant tape expands more rapidly.
Should the tape expand too much before inserting
the TRUFAST drain, simply recompress the tape by
hand and then insert the drain.
COPPER-TITE
ROOF DRAINS
• FOR RE-ROOFING INSTALLATIONS
• FITS INSIDE EXISTING DRAIN • SIZES 2" TO 10"
• CREATES SEAL FOR WATER BACK-UP PROTECTION
Specifications
Part #
RD-3000-AL
RD-4000-AL
RD-6000-AL
UPGRADES
RD-10000-CI-S
RD-10000-CI-SCR
RD-10000-AL-SCR
›› Prevents water back-up
problems by sealing side
wall gaps with expandable
waterproof tape.
CTS 29 CR(E)
›› Simple and quick to install.
SIZE
3" 4" BOLT
NEW 3
R
OR BU
6"
IGN F
S
E
D
NS
ATIO
APPLIC
10" 10" 10" • Seals securely within existing pipe
by sealing side wall gaps with
expandable waterproof tape
INSTALLATION
DRAIN
SEAL
• Simple
and quick to install,
CTS49
STEP 1: Inspect the old drain for possible cracks and
for a smooth, clean surface. Scrape away old asphalt
COPPER-TITE features
a 2"Use
(51mm)
wide
of high
and dirt.
a heat
gunband
to soften
olddensity
asphaltexpanding
and to
foam tape impregnated with asphalt which is factory applied in a
achieve
a
relatively
dry
surface,
if
necessary.
compressed state around the drain outlet.
ALTENLOH, BRINCK & CO. U.S., INC.
CAST IRONFEATURES
STRAINER
CAST IRON STRAINER/CR
A retro-fit
insert copper drain
HD•ALUMINUM
STRAINER/CR
• Prevents water back-up problems
CTS39
TRUFAST® roofing solutions are manufactured under
stringent engineering, quality, and environmental
standards at the ALTENLOH, BRINCK & CO. U.S., INC.
complex in Bryan, OH.
ISO 9001:2008 certified.
DESCRIPTION
ALUMINUM DRAIN W/ CR
ALUMINUM DRAIN W/ CR
ALUMINUM DRAIN W/ CR
COPPER-TITE sealant tape is designed to expand to approximately four
times its compressed
Just of
prior
inserting
thealuminum
COPPER-TITE
STEP 2:thickness.
Test the size
thetonew
TRUFAST
drain the installer removes the exterior restraining tape and immedidrain
by
inserting
it
into
the
now
clean
original
drain
ately sets the retro drain in place. The released tape gradually expands
-TITE drain and
theWith
existing
to fill the spacebefore
between
the COPPER
removing
the compression
tape.
the drain
sleeve making the connection watertight.
correct size confirmed, remove the drain, release the
COPPER-TITE sealant tape expands more slowly in cold temperatures.
compression
and
thetape
TRUFAST
When heat is applied
to the tape
inside
of promptly
the outletre-insert
the sealant
expands more drain.
rapidly.The tape gradually expands to fill the space
OPPER-TITE
Should the tapesurrounding
expand toothe
much
before
inserting
the Cthereby
outlet
of the
new drain,
drain, simply recompress the tape by hand and then insert the drain.
just peel off tape
TRUFAST aluminum drains are an economical
• COPPER for reliable long life
answer to potential water back-up problems.
• TITE for secure waterproof fit
They are designed to fit neatly into old
• Fits drains 2" (51mm) to 10" (203mm)
existing drains in a retrofit application.
Compressed Seal
Expanded Seal
creating the back-up seal feature.
STEP 3: Flash in the drain flange according to methods
determined by the membrane manufacturer and/or
FOR MORE INFORMATION:
the roofer using the clamping ring (CR),CALL
if applicable.
TOLL-FREE 1-800-828-8424
Website: www.marathondrains.com • E-mail: [email protected]
3310 N. Benzing Road, Orchard
Park, NY
14127-1538
Attach
the
strainer
dome.
PH: (716) 332-7673 • FAX: (716) 332-7676
®
800-443-9602
TRUFAST.COM
TRUFAST Copper RETROFIT roof DRAINS
®
Copper DRAINS
TRUFAST copper drains feature a 2" (51mm)wide band of high density, expanding foam tape
impregnated with asphalt that is factory applied in a
compressed state around the drain outlet.
Sealant tape is designed to expand to approximately
four times its compressed thickness. Just prior
to inserting the drain, the installer removes the
exterior compression tape and immediately sets the
retrofit drain in place. The released tape gradually
expands to fill the space between the TRUFAST
drain and the existing drain sleeve, making the
connection watertight.
COPPER RETROFIT ROOF DRAINS
Features
›› A retrofit insert copper drain.
›› Seals securely within
existing pipe.
›› Prevents water back-up
problems by sealing side
wall gaps with expandable
waterproof tape.
TRUFAST sealant tape expands more slowly in cold
temperatures. When heat is applied to the inside of
the outlet, the sealant tape expands more rapidly.
Should the tape expand too much before inserting
the TRUFAST drain, simply recompress the tape by
hand and then insert the drain.
COPPER-TITE
ROOF DRAINS
• FOR RE-ROOFING INSTALLATIONS
• FITS INSIDE EXISTING DRAIN • SIZES 2" TO 10"
• CREATES SEAL FOR WATER BACK-UP PROTECTION
Specifications
Part #
RD-3000-CU
RD-4000-CU
RD-6000-CU
UPGRADES
RD-10000-CI-S
RD-10000-CI-SCR
RD-10000-AL-SCR
CTS 29 CR(E)
›› Simple and quick to install.
›› Copper for a reliable, long life.
SIZE
3" 4" BOLT
NEW 3
R
OR BU
IGN F
6"
S
E
S
D
ATION
APPLIC
10" 10" 10" • Seals securely within existing pipe
by sealing side wall gaps with
expandable waterproof tape
INSTALLATION
DRAIN
SEAL
• Simple
and quick to install,
CTS49
STEP 1: Inspect the old drain for possible cracks and
for a smooth, clean surface. Scrape away old asphalt
COPPER-TITE features
a 2"Use
(51mm)
wide
of high
and dirt.
a heat
gunband
to soften
olddensity
asphaltexpanding
and to
foam tape impregnated with asphalt which is factory applied in a
achieve
a
relatively
dry
surface,
if
necessary.
compressed state around the drain outlet.
ALTENLOH, BRINCK & CO. U.S., INC.
CAST IRONFEATURES
STRAINER
CAST IRON STRAINER/CR
• A retro-fit insert copper drain
HD ALUMINUM STRAINER/CR
• Prevents water back-up problems
CTS39
TRUFAST® roofing solutions are manufactured under
stringent engineering, quality, and environmental
standards at the ALTENLOH, BRINCK & CO. U.S., INC.
complex in Bryan, OH.
ISO 9001:2008 certified.
DESCRIPTION
COPPER DRAIN W/ CR
COPPER DRAIN W/ CR
COPPER DRAIN W/ CR
COPPER-TITE sealant tape is designed to expand to approximately four
-TITE
times its compressed
Just of
prior
inserting
thecopper
COPPERdrain
STEP 2:thickness.
Test the size
thetonew
TRUFAST
drain the installer removes the exterior restraining tape and immediby
inserting
it
into
the
now
clean
original
drain
before
ately sets the retro drain in place. The released tape gradually expands
and the
to fill the spaceremoving
betweenthe
the compression
COPPER-TITE drain
tape. With
theexisting
correct drain
size
sleeve making the connection watertight.
confirmed, remove the drain, release the compression
COPPER-TITE sealant tape expands more slowly in cold temperatures.
tape andtopromptly
the TRUFAST
drain.
When heat is applied
the insidere-insert
of the outlet
the sealant
tapeThe
expands more tape
rapidly.
gradually expands to fill the space surrounding
-TITE
Should the tapethe
expand
much
COPPERthe
outlettoo
of the
newbefore
drain,inserting
thereby the
creating
drain, simply recompress the tape by hand and then insert the drain.
just peel off tape
TRUFAST copper drains are an economical
• COPPER for reliable long life
answer to potential water back-up problems.
• TITE for secure waterproof fit
They are designed to fit neatly into old
• Fits drains 2" (51mm) to 10" (203mm)
existing drains in a retrofit application.
Compressed Seal
Expanded Seal
back-up seal feature.
STEP 3: Flash in the drain flange according to methods
determined by the membrane manufacturer and/or
FOR MORE INFORMATION:
the roofer using the clamping ring (CR),CALL
if applicable.
TOLL-FREE 1-800-828-8424
Website: www.marathondrains.com • E-mail: [email protected]
3310 N. Benzing Road, Orchard
Park, NY
14127-1538
Attach
the
strainer
dome.
PH: (716) 332-7673 • FAX: (716) 332-7676
®
800-443-9602
TRUFAST.COM
TF-1301
TRUFAST PVC NEW Installation roof drains
®
PVC Drain Kit
A TRUFAST PVC assembly provides all the components for
easy installation. It offers the essential features of more
expensive drains at an affordable price. It is adaptable to
most generic materials of single-ply and conventional builtup roofing, for use with roof decks of steel, wood, precast
concrete or gypsum. This drain offers versatility and easy
installation on new and existing roofs.
Features
›› Molded polyethylene dome
strainer. Bolts securely to
clamping ring.
Specifications
Part #
RD-3000-PVC
RD-4000-PVC
RD-6000-PVC
UPGRADES
RD-10000-CI-S
RD-10000-AL-S
RD-12000-CI-S
›› Injection molded PVC or ABS
body. Ultraviolet stabilized for
long life. Solvent welds to PVC
or ABS DWV pipe.
›› Epoxy-coated aluminum
clamping collar with gravel
stop. Grooved for positive
drainage on smooth surfaced
roofs. Distortion resistant
and unbreakable.
›› Aluminum underdeck clamp
fastens drain securely to deck.
›› Flexible expansion coupling
connects to PVC, ABS or cast
iron pipe.
ALTENLOH, BRINCK & CO. U.S., INC.
DESCRIPTION
PVC DRAIN KIT
PVC DRAIN KIT
PVC DRAIN KIT
10" 10" 12" CAST IRON STRAINER
ALUMINUM STRAINER
CAST IRON STRAINER
INSTALLATION
STEP 1: FLASHING ATTACHMENT
Install single-ply membrane, soft copper, lead or BUR
felt flashing between clamping ring and drain flange.
STEP 2: PVC 4" (102mm) CONNECTOR
When joining ABS and PVC plastic together, the
use of an all-purpose cement is required. Under all
conditions, proper drying of PVC connector to drain
is required before attaching the coupling.
May be used with all BUR and singleply systems. Compatibility of single-ply
membranes, or bonding adhesives with PVC
and ABS plastics should be determined by the
membrane manufacturer and end user.
1
STEP 3: ACCESSORY TIGHTENING PROCEDURE
Use a maximum of 60 lbs. of torque to tighten
coupling bands, and use care when securing
clamping ring and underdeck clamp. Excessive
tightening not required.
STEP 4: COUPLING HOOK-UP
Will attach to Schedule 40 DWV plastic or No-Hub
cast iron drain line.
TRUFAST® roofing solutions are manufactured under
stringent engineering, quality, and environmental
standards at the ALTENLOH, BRINCK & CO. U.S., INC.
complex in Bryan, OH.
ISO 9001:2008 certified.
SIZE
3" 4" 6" STEP 5: SPECIAL NOTE
Wet or damaged insulation, or insulation with
low compressive strength, should be removed
around drain flange seating area and replaced with
insulation having a minimum compressive value of
25 PSI. This rating or higher should apply to all of
the above roofing conditions. Drain should have
insulation tapered to it, allowing complete drainage
through weep holes of clamp device.
5
3
2
4
Epoxy-Coated
Clamping
Collar with
Gravel Stop
Secured
Dome
Solvent Weld
Connection for 3"
or 4" PVC or ABS
Sch. 40DWV
800-443-9602
TRUFAST.COM
TRUFAST CAST IRON New
Installation roof drains
®
CAST IRON DRAIN Kit
The new TRUFAST cast iron assembly drain provides the
essential features of more expensive cast iron drains
at an affordable price. It is adaptable to most generic
materials of single-ply and conventional built-up roofing,
for use with roof decks of steel, wood, precast concrete or
gypsum. This drain offers versatility and easy installation
on new and existing roofs.
Features
›› Molded polyethylene dome
strainer. Bolts securely to
clamping ring.
Specifications
Part #
RD-3000-CI
RD-4000-CI
RD-6000-CI
UPGRADES
RD-10000-CI-S
RD-10000-AL-S
RD-12000-CI-S
›› Epoxy-coated cast iron body.
No hub outlet.
›› Epoxy-coated aluminum
clamping ring with gravel stop.
Grooved for positive drainage
on smooth surfaced roofs.
Distortion-resistant
and unbreakable.
›› Aluminum underdeck clamp.
Fastens drain securely to deck.
›› Flexible expansion coupling.
Connects to PVC, ABS or
cast iron pipe.
ALTENLOH, BRINCK & CO. U.S., INC.
DESCRIPTION
CAST IRON DRAIN KIT
CAST IRON DRAIN KIT
CAST IRON DRAIN KIT
10" 10" 12" CAST IRON STRAINER
ALUMINUM STRAINER
CAST IRON STRAINER
INSTALLATION
STEP 1: FLASHING ATTACHMENT
Install single-ply membrane, soft copper, lead
or BUR felt flashing between clamping ring and
drain flange.
1
4
STEP 2: COUPLING HOOK-UP
Will attach to Schedule 40 DWV plastic or NoHub cast iron drain line.
STEP 3: ACCESSORY TIGHTENING PROCEDURE
Use a maximum of 60 lbs. of torque to tighten
coupling bands, and use care when securing
clamping ring and underdeck clamp. Excessive
tightening not required.
TRUFAST® roofing solutions are manufactured under
stringent engineering, quality, and environmental
standards at the ALTENLOH, BRINCK & CO. U.S., INC.
complex in Bryan, OH.
ISO 9001:2008 certified.
SIZE
3" 4" 6" STEP 3: SPECIAL NOTE
Wet or damaged insulation, or insulation with
low compressive strength, should be removed
around drain flange seating area and replaced
with insulation having a minimum compressive
value of 25 PSI.
3
2
Secured
Dome
Epoxy-Coated
Clamping
Collar with
Gravel Stop
Epoxy-Coated
Cast Iron Body.
No Hub Outlet
800-443-9602
TRUFAST.COM
TF-1302