FutureLinkTM - Suttle Solutions

FutureLinkTM
Indoor Data & Voice Distribution System
Description
The FutureLinkTM 603 voice and data distribution system is ideal
for use in the MDU and SFU environments. Placement is flexible
with versions in plastic enclosures for individual placement or
modules that fit into the SOHO structured wiring enclosures with
other functional modules.
The units are configurable for voice and data distribution or
voice only distribution by positioning the bridge clip. With a 4
line input, 5 lines of voice or voice and data can be distributed.
An extension jack allows other modules to be added to expand
the number of distribution ports. These units also incorporate an
RJ31x alarm jack, 4 test ports and an alternate provider switch.
Module versions are available for use with an off-board xDSL
splitter or with an on-board VDSL splitter that is compatible with
ADSL and VDSL technologies.
Features
Specifications
Dimensions:
Input cable:
Output cable:
5.75” H x 8.25” W x 2” D (Plastic enclosure)
Accepts 4-line input
Allows 5-line output
■
■
■
■
■
■
■
Product Information
Suttle
Part Number
Distribute 4 wire input to 5 phone/voice outlets throughout the home
Off-board VDSL connection on line 1, or on-board VDSL filter version
available
Test jacks allow customer to test service back to the phone company
RJ31X jack allows auto-dialing alarm mechanism access to line 1
Additional IDC, jack and switch allow for alternate service provider’s
connection on line 1
Bridge module allows for disconnecting voice on lines 2 and 3, to
route Ethernet jacks to outlets
Extension jack allows expansion to other modules (wired 568A) such
as the SAM-V8 voice module
Description
603NIDS2-400-58
Network interface device for data & voice distribution with plastic enclosure. Designed for use with
off-board xDSL splitter such as the SAM-VDSL.
603NIDS2-400-PCB
Network interface device for data & voice distribution (replacement PCB board).
SAM-603BVD-SB
Data & voice distribution module for SOHO structured wiring enclosures. Designed for use with off-board
xDSL splitter such as the SAM-VDSL.
SAM-603VDSL
Data & voice distribution module for SOHO structured wiring enclosures. Contains on-board VDSL splitter.
FutureLinkTM
Indoor Data & Voice Distribution System
Application Diagrams
RJ31X Interface
to Alarm Panel
5 Voice/Data
Drops
FTTP for
Voice & Data
Service Diagram
TEST 1
THIS SIDE UP: L2 AND L3 ARE NOT BRIDGED (DATA)
TEST 2
THIS SIDE UP: L2 AND L3 ARE BRIDGED (VOICE)
LPF1
RJ31X
ALARM
OUT
TEST 3
T
R
T IN
R (VOICE)
1
PR2
T
R
PR3
T
R
PR4
T
R
2
PR1
T
R
PR2
T
R
PR3
T
R
PR4
T
R
3
PR1
T
R
PR1
T
R
PR2
T
R
PR2
T
R
PR3
T
R
PR3
PR4
T
R
PR4
4
T
R
T
5R
TEST 4
FOR OFF -BOARD
VDSL CONNECTION
PR1
T
R
TELCO INPUT
PROVIDER "A"
PR1
PR2
A/B
SWITCH
PAIR 1
A
1
2
ETHERNET
PR2/PR3
B
PR3
3
ETHERNET
PR2/PR3
PR1
ALTERNATE
PROVIDER "B"
PR4
4
ETHERNET
PR2/PR3
5
ETHERNET
PR2/PR3
ETHERNET
PR2/PR3
DISCONNECT THE BRIDGED VOICE CIRCUIT
(FOR PR.2 AND PR.3 ), THEN PLUG IN
THE ETHERNET JACK, FOR SERVICE TO
DISCRETE DISTRIBUTION LOCATION.
EXTENSION
JACK
PR 1/2/3/4
GND
POTS from ONT or
VOIP from Gateway
Data from Gateway
RJ31X Interface
to Alarm Panel
Optional Off-board
xDSL splitter
5 Voice/Data
Drops
xDSL for
Voice & Data
Service Diagram
TEST 1
THIS SIDE UP: L2 AND L3 ARE NOT BRIDGED (DATA)
TEST 2
RJ31X
ALARM
OUT
TEST 3
T
R
T IN
R (VOICE)
TELCO INPUT
PROVIDER "A"
PR1
PR2
1
T
R
PR1
T
R
PR1
T
R
PR1
T
R
PR2
T
R
PR2
T
R
PR2
T
R
PR2
T
R
PR3
T
R
PR3
T
R
PR3
T
R
PR3
PR4
T
R
PR4
T
R
PR4
T
R
PR4
2
3
4
T
R
T
5R
TEST 4
FOR OFF -BOARD
VDSL CONNECTION
xDSL
to
Gateway
THIS SIDE UP: L2 AND L3 ARE BRIDGED (VOICE)
LPF1
PR1
A/B
SWITCH
PAIR 1
A
B
PR3
1
2
ETHERNET
PR2/PR3
3
ETHERNET
PR2/PR3
PR1
ALTERNATE
PROVIDER "B"
PR4
4
ETHERNET
PR2/PR3
5
ETHERNET
PR2/PR3
ETHERNET
PR2/PR3
DISCONNECT THE BRIDGED VOICE CIRCUIT
(FOR PR.2 AND PR.3 ), THEN PLUG IN
THE ETHERNET JACK, FOR SERVICE TO
DISCRETE DISTRIBUTION LOCATION.
EXTENSION
JACK
PR 1/2/3/4
GND
xDSL and POTS
Data from Gateway
RJ31X Interface
to Alarm Panel
5 Voice Drops
TEST 1
THIS SIDE UP: L2 AND L3 ARE NOT BRIDGED (DATA)
TEST 2
T IN
R (VOICE)
TELCO INPUT
PROVIDER "A"
PR1
PR4
1
PR1
T
R
PR1
T
R
PR1
T
R
PR1
T
R
PR2
T
R
PR2
T
R
PR2
T
R
PR2
T
R
PR3
T
R
PR3
T
R
PR3
T
R
PR3
PR4
T
R
PR4
T
R
PR4
T
R
PR4
2
3
4
T
R
T
5R
TEST 4
FOR OFF -BOARD
VDSL CONNECTION
PR3
RJ31X
ALARM
OUT
TEST 3
T
R
PR2
THIS SIDE UP: L2 AND L3 ARE BRIDGED (VOICE)
LPF1
Voice Service Only
Diagram
A
A/B
SWITCH
PAIR 1
B
1
ETHERNET
PR2/PR3
PR1
ALTERNATE
PROVIDER "B"
EXTENSION
JACK
PR 1/2/3/4
2
ETHERNET
PR2/PR3
3
ETHERNET
PR2/PR3
4
ETHERNET
PR2/PR3
5
ETHERNET
PR2/PR3
DISCONNECT THE BRIDGED VOICE CIRCUIT
(FOR PR.2 AND PR.3 ), THEN PLUG IN
THE ETHERNET JACK, FOR SERVICE TO
DISCRETE DISTRIBUTION LOCATION.
GND
Incoming POTS
Specifications subject to change without notice. Copyright 2014.
1290514
1001 East Highway 212 • Hector, MN USA 55342 • suttlesolutions.com
Toll Free: 1 (800) 852-8662 • Local: (320) 848-6711 • Fax: (320) 848-6218