v8 carbureted - Paxton Superchargers

Classic Mustang
V8 CARBURETED
» Jay Jacquemoud of Mustang Depot,
Las Vegas, Nev., “Sinister Stang”
1965 5.0L (347 Stroker) NOVI-1500,
650HP+.
» 1964-1968 Mustang 260/289/302 V8
» 1969 mustang 351 Windsor V8 (H-Code)
» 1985 mustang 5.0L V8
As a tribute to the Paxton supercharged Shelby GT-350s of the ‘60s, we offer current systems for
V8 powered carbureted Ford Mustangs designed to fit under the stock hood. With a horsepower
increase ranging from 30% to more than 75% (depending on engine build), the new gear-driven,
nearly silent NOVI-1200 or NOVI-1500 supercharger will provide street superiority.
The NOVI supercharger uses a 3.7”
8-rib supercharger pulley, which
produces approximately 7-1/2 PSI @
5500 rpm on a stock V8 engine.
Two configurations are available: Passenger’s side mount, which allows the use of factory power
steering and, the more traditional driver’s side mount that requires an alternator be included
in place of a generator where applicable. For 1967-68 and 1969 351W passenger’s side mount
systems, the Paxton battery relocation kit (#8N150-010) will be required.
Also included: the supercharger
drive system with necessary belts
and pulleys (for use in V-belt setup), billet aluminum mounting
plate configuration for alternator
and supercharger drive assembly,
aluminum discharge tube with
Bosch compressor bypass valve, fuel
system upgrade with high-volume
boost-referenced mechanical fuel
pump, fuel filter, fuel lines and highflow air filter.
These systems include: a cast aluminum carburetor enclosure assembly for the use with Holley
#4150 type, Quick Fuel Q-750 BAN or Demon 650 MD 4-BBL carburetor (mechanical secondaries,
.120 needle and seat plus nitrophyll float set). The enclosure pressurizes the float bowls and
throttle shafts for seamless response and correct air/fuel ratio. It features front and rear -8 AN
fuel inlet ports as well as multiple locations for pressure/vacuum connections. Linkage arms,
splined shaft and left/right hand spherical rod ends are included for simple throttle connection
and adjustment. Carburetor studs are supplied and available separately. If the Holley carburetor
is used, an air diffuser (#8M011-001) is recommended.
Part No.
YEAR
MODEL
1001839
1964-68
Mustang 260/289/302
NOVI-1200 Carb System (Passenger Side)
DESCRIPTION
1001839SL
1964-68
Mustang 260/289/302
NOVI-1200SL Carb System (Passenger Side)
1001840
1964-68
Mustang 260/289/302
NOVI-1200 Carb System (Driver’s Side)
1001840SL
1964-68
Mustang 260/289/302
NOVI-1200SL Carb System (Driver Side)
1001846*
1964-68
Mustang 260/289/302
NOVI-1500 Carb System (Passenger Side)
1001847*
1964-68
Mustang 260/289/302
NOVI-1500 Carb System (Driver’s Side)
1001843
1969
Mustang 351 Windsor
NOVI-1200 Carb System (Passenger Side)
1001844
1969
Mustang 351 Windsor
NOVI-1200 Carb System (Driver’s Side)
1001848*
1969
Mustang 351 Windsor
NOVI-1500 Carb System (Passenger Side)
1001848SL*
1969
Mustang 351 Windsor
NOVI-1500SL Carb System (Passenger Side)
1001849*
1969
Mustang 351 Windsor
NOVI-1500 Carb System (Driver’s Side)
1001849SL*
1969
Mustang 351 Windsor
NOVI-1500SL Carb System (Driver’s Side)
1001841
Varies
Universal Small Block
NOVI-1200 Carb Base Kit (Passenger Side)
1001842
Varies
Universal Small Block
NOVI-1200 Carb Base Kit (Driver’s Side)
1001845
1985
Mustang 5.0L
NOVI-2000 Carb System
Call Paxton to confirm application prior to ordering Universal Small Block Kit.
» Systems are also available with optional polished finish.
Add -P to part number (i.e., 1001851-P).
These systems are not 50-state smog legal.
*With the NOVI-1500 capable of supporting additional horsepower
(vs NOVI-1200), a 750 CFM carburetor may be required.
14
SUPERCHARGER SYSTEMS
Supercharged horsepower and torque data
shown is a calculated estimate based on percentage increases from actual rear wheel hp/
tq measurements. Specifications are subject to
change.
» PAXTONAUTO.COM
≥ Air/Water Charge Cooler Closed Loop
Upgrade for driver-side mount blowthrough system allows for additional
horsepower gains. Compatible with part
numbers #1001840(-P), #1001847(-P),
and #1001842(-P). This configuration
includes charge air cooler core assembly,
water storage tank assembly, compact
water circulation pump and large capacity
water cooler with radiator mounting kit.
8PN301-080
8PN301-088
Charge Cooler, Satin
Charge Cooler, Polished
» 1-888-9-PAXTON