hydraulic piston pumps

HYDRAULIC PISTON PUMPS
www.JameswayFarmEq.com
Models for Every Need...
The Jamesway family of Hydraulic Piston Pumps includes models
designed for every type of manure and a wide range of accessories
to suit every job. The low energy requirements and low maintenance
needs make these pumps your first choice for simple and efficient
transfer of manure from barn to storage. With few moving parts,
these proven performers stand up to long hours of use in all sizes
of operations, including manure separators and digester systems.
These self-contained pumps are easy to install and Jamesway’s
planners will help you design your system. Selecting the right pump
and the right fittings from the extensive range of accessories will
guarantee a professional quality installation.
Solid-Trans Piston Pump
The Jamesway SOLID-TRANS Piston Pump transfers bedded manure long distances with only a 7.5 HP motor.
The powerful knife gates make the SOLID-TRANS the best choice for tie-stall barns or for freestall barns that may
have long bedding, hay or pen pack mixed into the manure.
The SOLID-TRANS Piston Pump may be installed
in a dry pit or may be half-buried with a shallow
pit providing service access.
Manure is transferred to storage
through 16” steel or PVC pipe.
The 5”x 48” hydraulic
cylinder provides
plenty of pumping
pressure.
How it works...
Suction
Stroke
Choose either manual or
hydraulic safety gate.
Choose from a wide
range of hoppers to
suit your installation.
Pipe access port
is standard.
Bedded manure
passes easily
through the 20”
round inlet tube.
Pressure
Stroke
The heavy knife gates
power through the
toughest bedding.
www.JameswayFarmEq.com
Semi-Trans Piston Pump
The Jamesway SEMI-TRANS Piston Pump transfers semi-solid manures with
short bedding from barn to storage. The SEMI-TRANS is the pump of choice for
sand-bedded barns, with the heavy construction and extra durability needed to
handle these tough conditions.
Powerful 5”
hydraulic
cylinder.
How it works...
Suction
Stroke
Pressure
Stroke
The SEMI-TRANS Pump can be mounted in
a dry pit with a suction pipe extending into
a reception pit when working with flowable
manure. Construction is easy, with the wet pit
and dry pit floors on the same elevation.
Inlet pipe facing down
for sand bedding
Choose manual or
hydraulic service gates.
The full width service doors provide easy
access to the flapper doors.
Inlet pipe facing up
for organic bedding
The hopper inlet model of SEMI-TRANS
accepts a wide range of manure types,
including non-flowable manure.
Choose
12.75” or 16”
discharge
pipe.
Liqui-Trans Piston Pump
The Jamesway LIQUI-TRANS Piston Pump sits high and dry at floor level while pulling manure from the reception pit
through the 8” steel suction pipe. The compact size and easy floor mounting makes planning simple and works well
in smaller manure rooms.
The LIQUI-TRANS Piston Pump transfers
liquid manure and manure slurry from barn to
storage through 6” or 8” PVC pipe. The ability
to handle thicker and lumpier materials than
is possible with centrifugal pumps makes the
LIQUI-TRANS a great choice in barns where
the manure consistency may vary.
The simplicity and reliability of the LIQUITRANS are important in applications such as
manure separators or digester loading, where
long running hours are the norm. The large
inlet pipe makes the LIQUI-TRANS difficult to
block, a key quality in automated systems.
How it works...
Suction
Stroke
Pressure
Stroke
20” diameter stainless
steel pump chamber with
4” hydraulic cylinder.
6” output gate valve
Urethane flapper
door seals.
Heavy-wall 8” steel
suction pipe.
Requiring only a 5 or 7.5 HP motor,
the LIQUI-TRANS pump is able to
transfer manure long distances,
even with single-phase power.
When feeding separators,
you can control the manure
discharge rate using the
optional hydraulic flow
divider on the power unit.
www.JameswayFarmEq.com
ACCESSORIES
Every installation needs the right accessories to ensure safe,
trouble-free operation of your Jamesway piston pump.
PROP-AGITATOR
The Jamesway Electric Prop-Agitator is frequently
used with Liqui-Trans pumps for chopping bedding
or homogenizing manure in the reception pit.
HYDRAULIC POWER UNIT
With nine models of hydraulic
power unit, Jamesway can
match the right choice to every
job. The hydraulic pump is
C-face mounted to guarantee
perfect
shaft
alignment,
whether choosing 5, 7½ or 10
HP motor.
CONTROLS
The Jamesway Hydraulic Unit motor starter includes
a monitor to automatically stop the system in case of
high oil temperature. These starters are also Ready-ForSignal models, designed to work with other Jamesway
controls, including Scraper-Boss control, Liquid-Level
control, Timer module, Float module, etc.
INLET
CLEANER
This hydraulic-powered unit rotates to
prevent bedding material from blocking
the Liqui-Trans inlet pipe.
PIPEs & FITTINGS
STEEL & PVC SIZES
SOLID-TRANS: 16” OD steel (Jamesway)
16” DR26 PVC (16.0” OD)
16” DR25 PVC (17.4” OD)
SEMI-TRANS: 12” DR26 PVC (12.75” OD)
12” DR25 PVC (13.2” OD)
16” DR26 PVC (16.0” OD)
16” DR25 PVC (17.4” OD)
LIQUI-TRANS: 6” SCHED 40 PVC (6.625” OD)
6” SCHED 80 PVC (6.625” OD)
8” SCHED 40 PVC (8.625” OD)
8” SCHED 80 PVC (8.625” OD)
AIR FLUSHING KITS
Air flushing is a method
of
preventing
sediment
accumulation in pipes and
is a normal maintenance
when
transferring
sandladen manure. A large
volume of high-pressure air
is discharged into the pipe,
causing the manure load to
push forward and scour the
pipe clean.
Matching the correct size and
quality of pipe to the application is
critical. Jamesway manufactures
fittings and adapters for a wide
range of pipes.
Jamesway clamp kits prevent
pipe joints from separating.
These are strongly recommended
for transfer of heavily bedded/
solid manure and for any
pipe where airflushing will be
employed.
SAFETY VALVES
Outlet gate valves must be closed to prevent backflow anytime
the pump is not running. Additional gate or flapper valves may be
added to allow easy service or as additional protection.
12” & 16” SAFETY VALVES
Pump
Transition
with safety
valve and air
flushing base
Underground
Safety Valve
Pipe Exit
Flapper Valve
Air flush riser pipes are
placed at the pump outlet and
intermittently along the pipe.
16” Riser Base
Underground
Gate Valve
6” & 8” FITTINGS
Elbow
8” Riser Base
PVC Adapter
Wall Flange
www.JameswayFarmEq.com
shuttle-Stroke gutter
The Jamesway Shuttle-Stroke hydraulic gutter cleaner is a
perfect fit, able to run off the same power unit with any of the
hydraulic piston pumps. Operates at full speed for transfer
into reception pits or use the variable speed control to match
the pump capacity when transferring into hopper-fed pumps.
The Jamesway Shuttle-Stroke is available in several widths
for use either as a cross collection gutter in freestall barns or
as a barn cleaner in tie-stall barns.
Visit our website for more information on these Jamesway products!
MANURE SYSTEMS:
•
•
•
•
•
•
•
Alley Scrapers
Vertical Electric Pumps
Electric Prop Agitator
Vertical PTO Pumps
Piston Transfer Pumps
Cross Gutter Systems
Barn Cleaners
MANURE APPLICATION:
•
•
•
•
•
•
•
JAMESWAY FARM EQUIPMENT, INC.
12 Route 249
St. Francois-Xavier (Quebec) JOB 2V0
Tele: (819) 845-7824
Fax: (819) 845-5153
Non-steer spreader tanks
Steerable spreader tanks
Injection Systems
Truck Mount Tankers
Lagoon Pumps
Prop Agitators
Loading pumps
DEALER:
FEEDING SYSTEMS:
• Silo Unloaders
• Feeders
• Conveyors
• Power Feed Carts
• Bedding Chopper
Jamesway Farm Equipment products
are designed in conformance to ASAE
Standards S354.4 “Safety for Farmstead
Equipment” and S318.15 “Safety for
Agricultural Equipment”. Some photos in this
brochure have safety shields removed or
open to show additional detail on equipment
features. Never operate equipment without
safety shields in place. Jamesway continually
updates and improves products and reserves
the right to make changes in the design,
specifications, and to add improvements to
our products, without incurring an obligation
on equipment purchased.
JAMESWAY FARM EQUIPMENT, INC.
USA Warehouse
15383 State Hwy. 131
Tomah, WI 54660
www.JameswayFarmEq.com