cast iron sheaves

Transcription

cast iron sheaves

PRICE LIST 1314
Effective: November 15, 2013
3465 Lost Nation #15, Willoughby, OH 44094
Phone (440) 946-9367 ~ (800) 989-0162 ~ Fax (440) 946-6148
E-Mail [email protected] Website: http://www.jdv-belts.com
Cast Iron sheaves
JAYDEE ENTERPRISES INC.
Table of Contents
Description
Page No.
Table of Contents
1
Conditions of Sale
2
Sheave Nomenclature
3
Bored to Size Sheaves (1&2 Groove AK & BK)
4 -7
H & HR
Bushing Sheaves
8 - 14
1VP, 2VP
Variable Pitch Sheave
15
1VL
Variable Pitch Sheaves AL Light Duty Sheaves
16
VL, VP
Variable Pitch Installation Instructions
17
JayDee Interchange VS. Maska
18 - 20
Features/Benefits of H.D. Sheaves & Bushing Combinations
21
A, B & C
QD Bushing Sheaves
22 - 31
3V-5V-8V
QD Bushing Sheaves
32 - 42
B
TB Bushing Sheaves
43 - 44
B
DST Bushing Sheaves
45 - 46
Flat Belt Pulley
47
QD
Bushings
48 - 49
QD
Bushing & Sheave Installation
TB
Cast Iron Bushings Inch
TB
Cast Iron Bushings Metric
53
TB
Bushing Installation
54
DST
Double Split Taper Bushings Inch, Metric & Installation
MPB
Bushings & Bolt Kits
50
51 - 52
55 - 56
57
Weld-On Hubs
58
BCS
59
Couplings
Jaw Couplings
60 - 61
1
Conditions of Sale
1. Freight Policy: FOB shipping warehouse, minimum order of $20 is required. JayDee will not
be responsible for any duties, taxes or customs fees for shipments sent out of the United States.
2. Terms: Net 30, a finance charge of 1-1/2% per month (18% A.P.R) will be assessed on overdue
accounts.
3. Delays: JayDee shall not be liable for delays caused by strikes, material shortages, damage
to property, governmental regulation or any other reason beyond the sellers control.
4. Prices: Prices are subject to change without notice. Orders will be billed at prices in effect
on the day of shipment.
5. Warranty: JayDee warrants all products to be free from defects in material and workmanship.
This warranty is valid for one year from the date of shipment. JayDee retains the right to replace
defective product at no charge or refund at the purchase price. JayDee will only give replacement
or refund upon confirmation of defect. JayDee's obligation is limited only to the replacement or
refund of defective product. Any incidental and or consequential damages are excluded.
The warranty is in lieu of all other warranties, express or implied warranties of merchantability or
fitness for any particular purpose or use.
6. Freight Claims: When JayDee makes a shipment , all goods are shipped in good condition.
Our responsibility for this shipment has now ended. When you receive your shipment, thoroughly
inspect for damage or shortage. If there is any damage or shortages, make the appropriate notation
on the freight bill of landing, and file a claim with the freight carrier. Although our responsibility
has ceased, we will gladly assist you in tracing and recovering lost goods and collect damages.
7. Return Goods: Under no circumstances will JayDee accept returned goods for credit or
replacement without prior written authorization. A request for return of merchandise can be made
by mail, fax, or telephone. JayDee will then fax a self-explanatory return of goods authorization
form. The instructions on the return good request form must be followed to insure a speedy
processing of your request. Our sales personnel are not authorized to pick up goods for return or
to approve any good for return. Special order items not normally stocked may not be returned.
All items returned that were shipped through no error on the part of JayDee shall be subject to a
minimum 15% restocking charge. If product was ordered in error and a replacement order for
correct parts is placed at the time of request for return - no restock will be applied. All returns must
be sent to JayDee freight prepaid. JayDee retains the right to refuse or reject any product returned
that is not considered in good resalable condition. Product can not be returned after 1 year from
sale date.
8. C.O.D: All C.O.D orders must ship from our main warehouse in Willoughby, OH, based upon
stock and availability for this warehouse.
9. The purchaser agrees to pay any additional attorney fees or collection expenses when accounts
are overdue. JayDee will add these incurred costs to the amount due from the purchaser.
2
JAYDEE ENTERPRISES INC
SHEAVE NOMENCLATURE
A/B QD SHEAVES
3B 124 SK
Number of Grooves
3
Belt Size
A&B
Pitch Dia.
12.4"
Bushing
SK
C QD SHEAVES
8C 80 E
Number of Grooves
8
Pitch Dia.
8.0"
Belt Size
C
Bushing
E
3V, 5V AND 8V QD SHEAVES
4/5V550SD
Number of Grooves
4
Belt Size
5V/5VX
Pitch Dia.
5.50"
3
Bushing
SD
BORED - TO - SIZE SHEAVES
Cast Iron Sheaves - Light Duty
Bored-to-Size - One Groove
AK20 to AK 184
for 3L, 4L and A Belts
Ordering part number size + bore:
Examples: AK 20-1/2
AK 39-1-1/8
AK
S=Solid
lh=Lighting Hole
SP= Spoked
Diameters
Part
List
No
Price
O.D.
"3L"
Pitch
AK17
AK20
AK21
AK22
AK23
AK25
AK26
AK27
AK28
AK30
AK32
AK34
AK39
AK41
AK44
AK46
AK49
AK51
AK54
AK56
AK59
AK61
AK64
AK66
AK69
AK71
AK74
9.00
9.00
9.00
9.00
10.00
10.50
10.80
11.00
11.50
13.00
13.50
14.00
17.00
20.00
21.00
21.50
22.00
23.00
24.00
25.00
26.00
26.50
28.00
28.50
30.00
32.00
32.50
1.75
2.00
2.10
2.20
2.30
2.50
2.60
2.70
2.80
3.05
3.25
3.45
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
6.95
7.25
1.16
1.46
1.56
1.66
1.76
1.96
2.06
2.16
2.26
2.46
2.66
2.86
3.16
3.36
3.66
3.86
4.16
4.36
4.66
4.86
5.16
5.36
5.66
5.86
6.16
6.36
6.66
1.50
1.80
1.90
2.00
2.10
2.30
2.40
2.50
2.60
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
6.20
6.50
6.70
7.00
AK79
AK84
AK89
AK94
36.00
39.00
41.00
43.50
7.75
8.25
8.75
9.25
7.16
7.66
8.16
8.66
AK99
AK104
AK109
AK114
AK124
AK134
AK144
AK154
AK184
45.50
46.00
48.00
50.00
57.00
68.00
76.00
85.00
108.00
9.75
10.25
10.75
11.25
12.25
13.25
14.25
15.25
18.25
9.16
9.66
10.16
10.66
11.66
12.66
13.66
14.66
17.66
Standard Key Dimensions
Shaft Range
Keyseat W x D
1/2
None
5/8 - 7/8
3/16 X 3/32
15/16 - 1 1/4
1/4 X 1/8
1 5/16 - 1 3/8
5/16 X 5/32
1 7/16 - 1 3/4
3/8 X 3/16
Dimensions
"4L+A" Type
F
L
P
C
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3s
3s
3s
3s
3s
3lh
3lh
3lh
3lh
3lh
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 5/32
1 15/32
1 15/32
1 15/32
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
23/32
23/32
23/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
0
0
0
7.50
8.00
8.50
9.00
3lh
3lh
3lh
3lh
3/4
3/4
3/4
3/4
1 15/32
1 15/32
1 15/32
1 15/32
23/32
23/32
23/32
23/32
0
0
0
0
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
18.00
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
23/32
0
0
0
0
0
0
0
0
0
Stock Bores in Inches
1/2, 5/8
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 15/16, 1
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
5/8, 3/4, 1, 1 1/8
3/4, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8, 1 7/16
1/2, 5/8, 3/4, 15/16, 1, 1 1/8, 1 3/16
1 1/4, 1 7/16
3/4, 1, 1 1/8, 1 7/16
1/2, 5/8, 3/4, 15/16, 1, 1 3/16, 1 7/16
3/4, 1, 1 1/8, 1 7/16
1/2, 5/8, 3/4 15/16, 1, 1 3/16, 1 1/4,
1 7/16
3/4, 1, 1 7/16
5/8, 3/4, 1, 1 3/16, 1 1/4, 1 3/8, 1 7/16
3/4, 1, 1 3/8, 1 7/16
3/4, 1, 1 3/16, 1 7/16
5/8, 3/4, 7/8, 1, 1 3/16, 1 1/4, 1 7/16
3/4, 1, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 3/16, 1 7/16
3/4, 1, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 3/16, 1 7/16
AK Sheaves are accurately machined from gray cast iron, statically
balanced, painted and individually packaged. They are furnished with
standard keyways & set screws. All set screws are 5/16 - 18 knurled.
style. Recommended tightening torque is 110-130 inch-lbs.
4
Bored-to-Size - Two Groove
2AK20 to 2AK 184
Order part number size + bore:
Examples: 2AK20 - 1/2
2AK 39-1-1/8
2AK
s= Solid
lh= lighting hole sp= spoked
Diameters
Part
No
List
Price
O.D.
Pitch
"3L" "4L+A" Type
2AK20
2AK21
2AK22
2AK23
2AK25
2AK26
2AK27
2AK28
2AK30
2AK32
2AK34
2AK39
2AK41
2AK44
2AK46
2AK49
2AK51
2AK54
2AK56
2AK59
2AK61
2AK64
2AK74
2AK84
21.00
22.00
23.00
23.50
24.00
25.00
26.50
29.00
31.00
35.00
36.00
37.00
41.00
42.00
44.00
45.00
46.00
46.50
47.00
51.00
53.00
55.00
63.00
68.00
2.00
2.15
2.25
2.35
2.55
2.65
2.75
2.85
3.05
3.25
3.45
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
7.25
8.25
1.46
1.56
1.66
1.76
1.96
2.06
2.16
2.26
2.46
2.66
2.86
3.16
3.36
3.66
3.86
4.16
4.36
4.66
4.86
5.16
5.36
5.66
6.66
7.66
1.80
1.90
2.00
2.10
2.30
2.40
2.50
2.60
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
8.00
1s
1s
1s
1s
1s
1s
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3s
3s
3lh
3lh
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 21/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 11/32
1 19/32
1 19/32
1 19/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
11/32
11/32
11/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/8
1/8
1/8
2AK94
2AK104
2AK114
2AK124
2AK134
2AK144
2AK154
2AK184
75.00
79.20
86.00
95.00
111.00
118.00
135.00
171.00
9.25
10.25
11.25
12.25
13.25
14.25
15.25
18.25
8.66
9.66
10.66
11.66
12.66
13.66
14.66
17.66
9.00
10.00
11.00
12.00
13.00
14.00
15.00
18.00
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
Shaft Range
Keyseat W x D
1/2
None
5/8 - 7/8
3/16 X 3/32
15/16 - 1 1/4
1/4 X 1/8
1 5/16 - 1 3/8
5/16 X 5/32
1 7/16 - 1 3/4
Dimensions
L
P
F
C
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4
1/2, 5/8, 3/4, 7/8
5/8, 3/4, 7/8, 1
5/8, 3/4, 7/8, 1
5/8, 3/4, 7/8, 1
5/8, 3/4, 7/8, 1
5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
7/8, 1, 1 1/8
3/4, 7/8, 1, 1 1/8, 1 3/8
3/4, 7/8, 1, 1 1/8, 1 3/8
5/8, 3/4, 7/8, 1, 1 1/8, 1 3/8
5/8, 3/4, 1, 1 1/8, 1 3/8
1, 1 1/8, 1 3/8
3/4, 7/8, 1, 1 1/8, 1 3/8
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
3/4, 15/16, 1, 1 1/8, 1 3/16,
1 1/4, 1 3/8, 1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
3/4, 15/16, 1, 1 7/16
3/4, 1, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 3/16, 1 7/16
1 3/16, 1 7/16
1, 1 7/16
1 3/16, 1 7/16
1 3/16, 1 7/16
2AK sheaves are accurately machined from gray cast iron, statically
standard keyways & set screws. All set screws are 5/16 -18 knurled.
style. Recommended tightening torque is 110-130 inch-lbs.
3/8 X 3/16
5
Bored-to-Size - One Groove
BK24 to BK 190
for 4L, 5L A and B Belts
Example BK24 - 1/2
BK45-1-1/8
Diameters
Part
List
Pitch
No
Price
O.D. "4L+A" "5L+B" Type
BK24
12.50
2.40
1.80
2.20
1s
BK25
13.00
2.50
1.90
2.30
1s
BK26
13.50
2.60
2.00
2.40
1s
BK27
14.50
2.70
2.10
2.50
2s
BK28
15.00
2.95
2.20
2.60
2s
BK30
16.00
3.15
2.40
2.80
2s
BK32
17.00
3.35
2.60
3.00
2s
BK34
19.00
3.55
2.80
3.20
2s
BK36
20.50
3.75
3.00
3.40
2s
BK40
21.50
3.95
3.20
3.60
2s
BK45
22.00
4.25
3.50
3.90
2s
BK47
24.00
4.45
3.70
4.10
2s
BK50
24.50
4.75
4.00
4.40
3s
BK52
25.00
4.95
4.20
4.60
3s
BK55
26.00
5.25
4.50
4.90
3s
BK57
27.00
5.45
4.70
5.10
3s
BK60
27.50
5.75
5.00
5.40
3s
BK62
28.00
5.95
5.20
5.60
3s
BK
s= solid
F
13/16
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
lh= lighting hole
Dimensions
L
P
1 1/16
13/32
1 1/16
13/32
1 1/16
13/32
1 1/16
13/32
1 1/16
13/32
1 1/16
13/32
1 1/16
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
1 5/32
13/32
C
5/32
5/32
5/32
5/32
5/32
5/32
5/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
BK65
BK67
BK70
30.50
32.00
35.50
6.25
6.45
6.75
5.50
5.70
6.00
5.90
6.10
6.40
3s
3s
3s
7/8
7/8
7/8
1 5/32
1 5/32
1 15/32
13/32
13/32
21/32
1/8
1/8
1/16
BK72
BK75
BK77
BK80
37.50
38.00
39.00
39.00
6.95
7.25
7.45
7.75
6.20
6.50
6.70
7.00
6.60
6.90
7.10
7.40
3lh
3lh
3lh
3lh
7/8
7/8
7/8
7/8
1 15/32
1 15/32
1 15/32
1 15/32
21/32
21/32
21/32
21/32
1/16
1/16
1/16
1/16
BK85
BK90
43.50
45.00
8.25
8.75
7.50
8.00
7.90
8.40
3lh
3lh
7/8
7/8
1 15/32
1 15/32
21/32
21/32
1/16
1/16
BK95
BK100
47.50
49.00
9.25
9.75
8.50
9.00
8.90
9.40
3lh
3lh
7/8
7/8
1 15/32
1 15/32
21/32
21/32
1/16
1/16
9.90
10.40
10.90
11.40
12.40
13.40
15.40
18.40
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
BK105
53.50
10.25 9.50
BK110
57.00
10.75 10.00
BK115
59.50
11.25 10.50
BK120
61.00
11.75 11.00
BK130
68.00
12.75 12.00
BK140
86.50
13.75 13.00
BK160
105.00 15.75 15.00
BK190
121.00 18.75 18.00
Shaft Range
Keyseat W x D
1/2
None
5/8 - 7/8
3/16 X 3/32
15/16 - 1 1/4
1/4 X 1/8
1 5/16 - 1 3/8
5/16 X 5/32
1 7/16 - 1 3/4
sp= spoked
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8, 1
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1/2, 1 1/8
5/8, 3/4, 7/8, 1, 1/2, 1 1/8
5/8, 3/4, 7/8, 1, 1/2, 1 1/8
5/8, 3/4, 7/8, 1, 1/2, 1 1/8
5/8, 3/4, 7/8, 1, 1/2, 1 1/8, 1 3/16
5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16
1/2, 5/8, 3/4, 7/8, 15/16, 1,
1 1/8, 1 3/16
5/8, 3/4, 1, 1 1/8
5/8, 3/4, 1, 1 1/8, 1 3/16
5/8, 3/4, 7/8, 15/16, 1, 1 1/8,
1 3/16, 1 7/16
3/4, 7/8, 1, 1 1/8, 1 3/8
3/4, 1, 1 1/8
3/4, 1, 1 1/8, 1 3/8
5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16, 1 1/4
1 3/8, 1 7/16
3/4, 1, 1 1/8, 1 3/8, 1 7/16
3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16, 1 3/8,
1 7/16
3/4, 1, 1 1/8, 1 3/8
3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16,
1 1/4, 1 3/8, 1 7/16
1, 1 3/8, 1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
1, 1 7/16
3/4, 1, 1 3/16, 1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 1/4, 1 7/16
3/4, 1, 1 3/16, 1 7/16
1, 1 1/8, 1 3/16, 1 1/4, 1 7/16
1, 1 3/16, 1 1/4, 1 7/16
BK Sheaves are accurately machined from gray cast iron, statically
standard keyways & set screws. All set screws are 5/16 - 18 knurled.
Recommended tightening torque is 110-130 inch lbs.
3/8 X 3/16
6
Bored-to-Size - Two Groove
2BK25 to 2BK 190
for 4L, 5L A and B Belts
Example 2BK25 - 1/2
2BK47-1-1/8
2BK
s= solid lh= lighting hole sp=spoked
Part
No
List
Price
Diameters
Pitch
C
2BK25
2BK27
2BK28
2BK30
2BK32
2BK34
2BK36
2BK40
2BK45
2BK47
2BK50
2BK52
2BK55
2BK57
2BK60
2BK62
2BK65
2BK67
2BK70
2BK80
30.00
31.00
33.00
36.00
37.00
38.00
39.00
41.00
44.00
45.00
47.00
48.00
51.00
53.00
55.00
56.00
59.00
63.00
69.00
74.00
2.50
2.70
2.95
3.15
3.35
3.55
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
7.75
1.90
2.10
2.20
2.40
2.60
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
2.30
2.50
2.60
2.80
3.00
3.20
3.40
3.60
3.90
4.10
4.40
4.60
4.90
5.10
5.40
5.60
5.90
6.10
6.40
7.40
1s
1s
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3s
3s
3lh
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 31/32
1 31/32
1 31/32
1 31/32
1 31/32
1 31/32
1 31/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 15/32
1 19/32
1 19/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
15/32
11/32
11/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1/2
1/2
2BK90
2BK100
2BK110
2BK120
2BK130
2BK140
2BK160
2BK190
76.00
89.00
95.00
103.00
115.00
121.00
144.00
184.00
8.75
9.75
10.75
11.75
12.75
13.75
15.75
18.75
8.00
9.00
10.00
11.00
12.00
13.00
15.00
18.00
8.40
9.40
10.40
11.40
12.40
13.40
15.40
18.40
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
1 19/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2, 5/8, 3/4, 7/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8, 1 3/8
5/8, 3/4, 7/8, 1, 1 1/8
1, 1 1/8, 1 3/8
7/8, 1, 1 1/8, 1 3/8
3/4, 1, 1 1/8, 1 3/8
5/8, 7/8, 1, 1 1/8, 1 3/8
1 1/8, 1 3/8
1, 1 1/8, 1 3/8
3/4, 7/8, 1, 1 1/8, 1 3/8
1, 1 1/8
1, 1 1/8, 1 3/8
1, 1 1/8, 1 3/8
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 1/4, 1 3/8,
1 7/16
3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
3/4, 1, 1 3/16, 1 3/8, 1 7/16
1, 1 3/16, 1 7/16
1, 1 3/16, 1 7/16
1, 1 3/16, 1 7/16
1, 1 3/16, 1 7/16
1, 1 3/16, 1 7/16
1 3/16, 1 1/4, 1 7/16
Shaft Range
Keyseat W x D
1/2
None
5/8 - 7/8
3/16 X 3/32
15/16 - 1 1/4
1/4 X 1/8
1 5/16 - 1 3/8
5/16 X 5/32
1 7/16 - 1 3/4
Dimensions
L
P
F
2BK Sheaves are accurately machined from gray cast iron
statically balanced, painted and individually packaged. They are
furnished with standard keyways & set screws. All set screws are
5/16-18 knurled. Recommended tightening Torque is
110-130 inch lbs.
3/8 X 3/16
7
H Bushing Sheaves
Cast Iron Sheaves - Light - Duty
Bushed, One Groove
AK30H to AK184H
Order part number size
Example AK30H
for 3L, 4L AND A BELTS
Order H Bushings Separately
For All 1 Groove Sheaves:
F = 3/4
L = 1 1/4
G = 7/16
E = 3/16
AKH
s= solid
Part
No
AK30H
AK32H
AK34H
AK39H
AK41H
AK44H
AK46H
AK49H
AK51H
AK54H
AK56H
AK59H
AK61H
AK64H
AK66H
AK69H
AK71H
AK74H
AK79H
AK84H
AK89H
AK94H
AK99H
AK104H
AK109H
AK114H
AK124H
AK134H
AK144H
AK154H
AK184H
Diameters
List
Pitch
Price
O.D "3L" "4L+A TYPE
16.00
20.00
20.50
22.00
22.50
22.80
23.00
23.40
24.00
24.50
24.80
25.00
25.30
25.80
26.00
28.00
30.00
31.00
34.00
36.00
39.00
42.00
44.50
45.00
47.00
48.00
53.00
61.00
69.00
76.00
88.00
3.05
3.30
3.45
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
6.95
7.25
7.75
8.25
8.75
9.25
9.75
10.25
10.75
11.25
12.25
13.25
14.25
15.25
18.25
2.46
2.66
2.86
3.16
3.36
3.66
3.86
4.16
4.36
4.66
4.86
5.16
5.36
5.66
5.86
6.16
6.36
6.66
7.16
7.66
8.16
8.66
9.16
9.66
10.16
10.66
11.66
12.66
13.66
14.66
17.66
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
6.20
6.50
6.70
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
18.00
1s
1s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3sp
O.L.
lh= lighting hole
Dimensions
P
X
1 13/16
1 13/16
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
7/8
7/8
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
8
1 3/16
1 3/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
sp=spoked
Part
No
H 3/8
H 7/16
H 1/2
H 9/16
H5/8
H 11/16
H 3/4
H 13/16
H 7/8
H 15/16
H1
H 1-1/16
H 1-1/8
H 1-3/16
H 1-1/4
H 1-5/16
H 1-3/8
H 1-7/16
H 1-1/2
Stock H Bushings
Bore
Keyseat
Inches
Inches
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 - 1/16
1 - 1/8
1 - 3/16
1 - 1/4
1 - 5/16
1 - 3/8
1 - 7/16
1 - 1/2
None
None
1/8 X 1/16
1/8 X 1/16
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
5/16 X 1/16*
5/16 X 1/16*
3/8 X 1/16*
3/8 X 1/16*
AK Sheaves are accurately
machined from gray cast iron,
statically balanced, painted and
individually packaged.
*Note Shallow keyseat - Key
furnished to fit a standard depth
keyseat in shaft.
H Bushing Sheaves
Bushed, Two Groove
2AK30H to 2AK184H
Example 2AK30H
F = 1 3/8
l = 1 1/4
X = 7/8
G = 7/16
E = 3/16
2AKH
Part
No.
Part
No.
2AK30H
2AK32H
2AK34H
2AK39H
2AK41H
2AK44H
2AK46H
2AK49H
2AK51H
2AK54H
2AK56H
2AK59H
2AK61H
2AK64H
2AK74H
2AK84H
2AK94H
2AK104H
2AK114H
2AK124H
2AK134H
2AK144H
2AK154H
2AK184H
Diameters
List
Pitch
Type
Price
O.D "3L" "4L+A"
34.00
38.00
39.00
40.00
43.00
45.00
47.00
48.00
49.00
52.00
53.00
54.00
55.00
56.00
63.00
70.00
75.00
78.00
87.00
92.00
97.00
103.00
115.00
152.00
3.05
3.25
3.45
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
7.25
8.25
9.25
10.25
11.25
12.25
13.25
14.25
15.25
18.25
2.46
2.66
2.86
3.16
3.36
3.66
3.86
4.16
4.36
4.66
4.86
5.16
5.36
5.66
6.66
7.66
8.66
9.66
10.66
11.66
12.66
13.66
14.66
17.66
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
18.00
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
O.L.
Dimensions
P
C
2 7/16
2 7/16
2
2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
7/8
7/8
7/16
7/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
9
15/16
15/16
1/2
1/2
-
H 3/8
H 7/16
H 1/2
H 9/16
H 5/8
H 11/16
H 3/4
H 13/16
H 7/8
H 15/16
H1
H 1-1/16
H 1-1/8
H 1-3/16
H 1-1/4
H 1-5/16
H 1-3/8
H 1-7/16
H 1-1/2
Stock H Bushings
Bore
Keyseat
Inches
Inches
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
None
None
1/8 X 1/16
1/8 X 1/16
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
5/16 X 1/16*
5/16 X 1/16*
3/8 X 1/16*
3/8 X 1/16*
AK Sheaves are accurately
machined from grey cast iron,
* Note: Shallow keyseat- Key
keyseat in shaft.
H Bushing Sheaves
Bushed, One Groove
BK30H to BK190H
Example BK30H
for 4L, 5L,
A and B Belts
For All 1 Groove Sheaves
F = 7/8
L = 1 1/4
G = 7/16
E = 3/16
BKH
DIAMETERS
Dimensions
Part No.
Pitch
List Price O.D. "4+A" "5L+B" Type
O.L.
P
C
BK30H
BK32H
BK34H
BK36H
BK40H
BK45H
BK47H
BK50H
BK52H
BK55H
BK57H
BK60H
BK62H
BK65H
BK67H
BK70H
BK72H
BK75H
BK77H
BK80H
BK85H
BK90H
BK95H
BK100H
BK105H
BK110H
BK115H
BK120H
BK130H
BK140H
BK150H
BK160H
BK190H
22.50
24.00
24.50
24.80
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
31.00
32.00
36.00
36.50
37.00
37.50
38.00
41.00
44.00
47.00
48.50
49.50
54.00
55.00
59.50
64.50
73.00
79.00
86.00
116.00
3.15
3.35
3.55
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
6.95
7.25
7.45
7.75
8.25
8.75
9.25
9.75
10.25
10.75
11.25
11.75
12.75
13.75
14.75
15.75
18.75
2.40
2.60
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
6.20
6.50
6.70
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
18.00
2.80
3.00
3.20
3.40
3.60
3.90
4.10
4.40
4.60
4.90
5.10
5.40
5.60
5.90
6.10
6.40
6.60
6.90
7.10
7.40
7.90
8.40
8.90
9.40
9.90
10.40
10.90
11.40
12.40
13.40
14.40
15.40
18.40
1s
1s
1s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3sp
1 15/16
1 15/16
1 15/16
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
10
7/8
7/8
7/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
X
1 3/8
1 3/8
1 3/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Part
No.
Stock H Bushings
Bore
Keyseat
Inches
Inches
H 3/8
H 7/16
H 1/2
H 9/16
H 5/8
H 11/16
H 3/4
H 13/16
H 7/8
H 15/16
H1
H 1-1/16
H 1-1/8
H 1-3/16
H 1-1/4
H 1-5/16
H 1-/3/8
H 1-7/16
H 1-1/2
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
None
None
1/8 X 1/16
1/2 X 1/16
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
5/16 X 1/16*
5/16 X 1/16*
3/8 X 1/16*
3/8 X 1/16*
BK Sheaves are accurately
machined from gray cast iron,
* Note: Shallow keyseat- Key
keyseat in shaft.
H Bushing Sheaves
Bushed, Two Groove
2BK32H to 2BK190H
Example 2BK32H
F = 1 3/4
L = 1 1/4
X = 7/8
G = 7/16
E = 3/16
for 4L, 5L, A and B BELTS
2BKH
Part
No.
s=solid
Part
No.
2BK32H
2BK34H
2BK36H
2BK40H
2BK45H
2BK47H
2BK50H
2BK52H
2BK55H
2BK57H
2BK60H
2BK62H
2BK65H
2BK67H
2BK70H
2BK80H
2BK90H
2BK100H
2BK110H
2BK120H
2BK130H
2BK140H
2BK160H
2BK190H
List
Price
40.00
41.00
42.00
43.00
44.00
47.00
48.00
49.00
53.00
54.00
55.00
56.00
60.00
61.00
63.00
73.00
74.00
86.00
94.00
107.00
115.00
130.00
136.00
153.00
lh= lighting hole sp=spoked
DIAMETERS
Pitch
3.35
3.55
3.75
3.95
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
7.75
8.75
9.75
10.75
11.75
12.75
13.75
15.75
18.75
2.60
2.80
3.00
3.20
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
15.00
18.00
3.00
3.20
3.40
3.60
3.90
4.10
4.40
4.60
4.90
5.10
5.40
5.60
5.90
6.10
6.40
7.40
8.40
9.40
10.40
11.40
12.40
13.40
15.40
18.40
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
Dimensions
O.L.
P
C
2 13/16
2 13/16
2 3/8
2 3/8
2 3/8
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
11
7/8
7/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1 5/16
1 5/16
7/8
7/8
7/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Stock H Bushings
Bore
Keyseat
Inches
Inches
H 3/8
H 7/16
H 1/2
H 9/16
H 5/8
H 11/16
H 3/4
H 13/16
H 7/8
H 15/16
H1
H 1-1/16
H 1-1/8
H 1-3/16
H 1-1/4
H 1-5/16
H 1-3/8
H 1-7/16
H 1-1/2
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-1/16
1-1/2
None
None
1/8 X 1/16
1/8 X 1/16
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
3/16 X 3/32
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
1/4 X 1/8
5/16 X 1/16*
5/16 X 1/16*
3/8 X 1/16*
3/8 X 1/16*
BK Sheaves are accurately
machined from grey cast iron,
H Bushing Sheaves
Bushed, Three Groove
3BK45H to 3BK190H
Example 3BK45H
for 4L, 5L, A and B BELTS
s= solid
lh= lighting hole
Part
No.
List
Price
DIAMETERS
Pitch
O.D.
"4L+A" "5L+B"
3BK45H
3BK47H
3BK50H
3BK52H
3BK55H
3BK57H
3BK60H
3BK62H
3BK65H
3BK67H
3BK70H
3BK80H
3BK90H
3BK100H
3BK110H
3BK120H
3BK130H
3BK140H
3BK160H
3BK190H
56.00
57.00
58.00
59.00
63.00
65.00
67.00
70.00
73.00
74.00
80.00
94.00
106.00
114.00
115.00
139.00
150.00
176.00
182.00
220.00
4.25
4.45
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
7.75
8.75
9.75
10.75
11.75
12.75
13.75
15.75
18.75
3.50
3.70
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
15.00
18.00
3.90
4.10
4.40
4.60
4.90
5.10
5.40
5.60
5.90
6.10
6.40
7.40
8.40
9.40
10.40
11.40
12.40
13.40
15.40
18.40
sp= spoked
Type
O.L.
1s
1s
1s
1s
1s
1s
2s
2s
2s
2s
2s
2lh
2lh
2lh
2lh
3sp
3sp
3sp
3sp
3sp
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
Dimensions
P
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
BK Sheaves are accurately machined from gray cast iron, statically balanced, painted and
12
C
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
9/32
9/32
9/32
11/32
11/32
11/32
11/32
11/32
13/32
13/32
13/32
13/32
HR Bushing Sheaves
For all
1 Groove Sheaves
F=3/4
L=1 1/4
G=7/16
E=3/16
X=7/8
P=9/16
O.L=1 1/2
Cast Iron Sheaves - Light - Duty bushed,
One Groove and
Two Groove
AK39HR to AK184HR 2AK44HR to 2AK184HR
AKHR
Example AK39HR or 2AK44HR
All HR sheaves use standard JayDee H Bushings
Part No.
List
2AKHR
For all
2 Groove Sheaves
F=1 3/4
L=1 1/4
G=7/16
E=3/16
P=1/16
O.L=1 1/2
X=7/8
s= solid
lh= lighting hole
sp= spoked
DIAMETERS
DIAMETERS
Pitch
Pitch
Part No.
O.D.
"3L" "4L or Type
O.D.
"3L" "4L or
List
AK39HR
23.50
3.75
3.16
3.50
AK41HR
24.00
3.95
3.36
3.70
AK44HR
24.50
4.25
3.66
4.00
AK46HR
25.00
4.45
3.86
4.20
AK49HR
25.00
4.75
4.16
4.50
AK51HR
25.50
4.95
4.36
4.70
AK54HR
26.00
5.25
4.66
5.00
AK56HR
26.50
5.45
4.86
5.20
AK59HR
27.00
5.75
5.16
5.50
AK61HR
27.50
5.95
5.36
5.70
AK64HR
27.50
6.25
5.66
6.00
AK66HR
28.00
6.45
5.86
6.20
AK69HR
30.00
6.75
6.16
6.50
AK71HR
32.50
6.95
6.36
6.70
AK74HR
34.00
7.25
6.66
7.00
AK79HR
37.00
7.75
7.16
7.50
AK84HR
39.00
8.25
7.66
8.00
AK89HR
42.00
8.75
8.16
8.50
AK94HR
45.50
9.25
8.66
9.00
AK99HR
47.50
9.75
9.16
9.50
AK104HR
48.00
10.25
9.66
10.00
AK109HR
51.00
10.75
10.16 10.50
AK114HR
52.00
11.25
10.66 11.00
AK124HR
57.00
12.25
11.66 12.00
AK134HR
66.00
13.25
12.66 13.00
AK144HR
74.00
14.25
13.66 14.00
AK154HR
81.00
15.25
14.66 15.00
AK184HR
96.00
18.25
17.66 18.00
All HR sheaves use standard JayDee H bushings.
2s
2s
2s
2s
2s
2s
2s
2s
2s
3s
3s
3s
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
3sp
3sp
Type
2AK44HR
48.00
4.25
3.66
4.00
2s
2AK46HR
50.00
4.45
3.86
4.20
2s
2AK49HR
51.00
4.75
4.16
4.50
2s
2AK51HR
53.00
4.95
4.36
4.70
2s
2AK54HR
56.00
5.25
4.66
5.00
2s
2AK56HR
57.00
5.45
4.86
5.20
2s
2AK59HR
58.00
5.75
5.16
5.50
3s
2AK61HR
59.00
5.95
5.36
5.70
3s
2AK64HR
61.00
6.25
5.66
6.00
3s
2AK74HR
68.00
7.25
6.66
7.00
3lh
2AK84HR
76.00
8.25
7.66
8.00
3lh
2AK94HR
82.00
9.25
8.66
9.00
3lh
2AK104HR 85.00 10.25
9.66
10.00
3sp
2AK114HR 94.00 11.25
10.66
11.00
3sp
12.00
2AK124HR 99.00 12.25
11.66
3sp
2AK134HR 105.00 13.25
12.66
13.00
3sp
2AK144HR 111.00 14.25
13.66
14.00
3sp
2AK154HR 124.00 15.25
14.66
15.00
3sp
2AK184HR 164.00 18.25
17.66
18.00
3sp
Each HR Sheave includes an HRBK bolt kit to use in place
of standard H bushing bolts.
AK Sheaves are accurately machined from gray cast iron,
statically balanced, painted and individually packaged.
Note: Cast iron sheaves may not exceed 6500 FRPM
This speed DOES NOT specify if dynamic balancing
(2 plane) is required.
Contact Customer Service to verify whether dynamic
balancing is required.
Stock H Bushings and Metric Bore on pages 54 & 55
13
HR Bushing Sheaves
Cast Iron Sheaves - Light Duty bushed
For All
For All
One Groove and
Two Groove
1 Groove Sheaves
F=7/8
L=1 1/4
G=7/16
E=3/16
X=7/8
Two Groove Sheaves
BK36HR to BK190HR 2BK50HR to 2BK190HR
Example BK36HR or 2BK50HR
BKHR
All HR sheaves use standard JayDee H Bushings
Part No.
List
Price
2BKHR
F=1 3/4
L=1 1/4
X=7/8
G=7/16
E=3/16
P=7/16
O.L=1 3/4
s= solid
lh= lighting hole
sp=spoked
DIAMETERS
DIAMETERS
Pitch
Pitch
Part No.
"4L or "5L or
List
"4L or "5L or
O.D.
Type
O.D.
A"
B"
Price
A"
B"
BK36HR
26.00
3.75
3.00
3.40
2s
BK40HR
26.50
3.95
3.20
3.60
2s
BK45HR
27.00
4.25
3.50
3.90
2s
BK47HR
28.00
4.45
3.70
4.10
2s
BK50HR
28.50
4.75
4.00
4.40
2s
BK52HR
29.00
4.95
4.20
4.60
2s
BK55HR
29.50
5.25
4.50
4.90
2s
BK57HR
30.00
5.45
4.70
5.10
2s
BK60HR
30.50
5.75
5.00
5.40
2s
BK62HR
31.50
5.95
5.20
5.60
2s
BK65HR
33.50
6.25
5.50
5.90
2s
BK67HR
34.50
6.45
5.70
6.10
2s
BK70HR
36.00
6.75
6.00
6.40
2s
BK72HR
37.50
6.95
6.20
6.60
3s
BK75HR
39.00
7.25
6.50
6.90
3lh
BK77HR
40.00
7.45
6.70
7.10
3lh
BK80HR
41.00
7.75
7.00
7.40
3lh
BK85HR
44.00
8.25
7.50
7.90
3lh
BK90HR
47.00
8.75
8.00
8.40
3lh
BK95HR
50.50
9.25
8.50
8.90
3lh
BK100HR
25.50
9.75
9.00
9.40
3lh
BK105HR
53.50
10.25
9.50
9.90
3lh
BK110HR
57.50
10.75
10.00 10.40
3sp
BK115HR
59.00
11.25
10.50 10.90
3sp
BK120HR
63.50
11.75
11.00 11.40
3sp
BK130HR
69.50
12.75
12.00 12.40
3sp
BK140HR
78.50
13.75
13.00 13.40
3sp
BK150HR
85.50
14.75
14.00 14.40
3sp
BK160HR
92.00
15.75
15.00 15.40
3sp
BK190HR
125.00
18.75
18.00 18.40
3sp
All HR sheaves use standard JayDee H bushings.
Stock H Bushings and Metric Bore on pages 54 & 55
2BK50HR
2NK52HR
2BK55HR
2BK57HR
2BK60HR
2BK62HR
2BK65HR
2BK67HR
2BK70HR
2BK80HR
2BK90HR
2BK100HR
2BK110HR
2BK120HR
2BK130HR
2BK140HR
2BK160HR
2BK190HR
52.00
53.00
57.00
58.00
60.00
61.00
65.00
66.00
68.00
79.00
81.00
93.00
101.00
115.00
123.00
140.00
146.00
164.00
4.75
4.95
5.25
5.45
5.75
5.95
6.25
6.45
6.75
7.75
8.75
9.75
10.75
11.75
12.75
13.75
15.75
18.75
4.00
4.20
4.50
4.70
5.00
5.20
5.50
5.70
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
15.00
18.00
4.40
4.60
4.90
5.10
5.40
5.60
5.90
6.10
6.40
7.40
8.40
9.40
10.40
11.40
12.40
13.40
15.40
18.40
Type
2s
2s
2s
2s
2s
2s
3s
3s
3s
3lh
3lh
3lh
3sp
3sp
3sp
3sp
3sp
3sp
BK Sheaves are accurately machined from gray cast iron,
BK Sheaves are accurately machine from gray cast iron,
Note: Cast iron sheaves may not exceed 6500 FPM. This speed
DOES NOT specify if dynamic balancing (2 plane) is required
Contact customer service to verify whether dynamic balancing
is required.
14
Variable Pitch Adjustable Sheaves
Bored-to Size,
One Groove and
Two Groove
1VP and 2VP Dimensions
VP
1VP & 2VP sheaves may be used with 3L, 4L, 5L, A, B and 5V Belts
PART
List
F
G
L
K
No.
Price O.D. Max Min Max Min
1VP25
1VP30
1VP34
19.00
19.50
24.00
2.380
2.870
3.150
0.810 0.560
0.810 0.560
1.000 0.690
0.630 0.380
0.630 0.380
0.810 0.500
1.590
1.660
1.880
0.620
0.630
0.780
1VP40
25.00
3.750
1.060 0.690
0.880 0.500
1.880
0.660
1VP44
26.50
4.150
1.060 0.690
0.880 0.500
1.880
0.660
1VP50
30.50
4.750
1.060 0.690
0.880 0.500
2.000
0.780
1VP56
1VP60
46.00
71.00
5.350
6.000
1.060 0.690
1.250 0.880
0.880 0.500
1.031 0.660
2.000
2.160
0.780
0.850
1VP62
72.00
5.950
1.130 0.750
0.880 0.500
2.000
0.780
1VP65
75.00
6.500
1.250 0.880
1.030 0.660
2.160
0.850
1VP68
76.00
6.550
1.130 0.750
0.880 0.500
2.000
0.780
1VP71
80.00
7.100
1.250 0.880
1.030 0.660
2.160
0.850
1VP75
106.00
7.500
1.250 0.880
1.030 0.500
2.160
0.850
2VP36
2VP42
2VP50
2VP56
57.00
66.00
76.00
89.00
3.350
3.950
4.750
5.350
2.000
2.130
2.130
2.130
0.500
0.500
0.500
0.500
3.000
3.000
3.000
3.000
1.190
1.190
1.190
1.190
2VP60
114.00
6.000
2.380 1.630 1.030 0.660
3.250
1.250
2VP62
115.00
5.950
2.130 1.380 0.880 0.500
3.000
1.190
2VP65
121.00
6.500
2.380 1.630 1.030 0.660
3.250
1.250
2VP68
126.00
6.550
2.130 1.380 0.880 0.500
3.000
1.190
2VP71
128.00
7.100
2.380 1.630 1.030 0.660
3.250
1.250
2VP75
191.00
7.500
2.380 1.630 1.030 0.660
3.250
1.250
1.380
1.380
1.380
1.380
0.810
0.880
0.880
0.880
BORE
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1/2, 5/8, 3/4,
7/8, 1, 1 1/8
1/2, 5/8, 3/4,
7/8, 1, 1 1/8
1/2, 5/8, 3/4,
7/8, 1, 1 1/8
1/2, 5/8, 3/4,
7/8, 1, 1 1/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
5/8, 3/4, 7/8, 1, 1 1/8,
1 1/4, 1 3/8
3/4, 7/8, 1 1/8,
1 3/8
5/8, 3/4, 7/8, 1, 1 1/8,
1 1/4, 1 3/8
3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
1/2, 5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8
5/8, 3/4, 7/8, 1, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1, 1 1/8,
1 1/4, 1 3/8, 1 5/8
3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
3/4, 7/8, 1 1/8,
1 3/8, 1 5/8
M
De
1.375
1.500
1.500
1.750
1.500
1.750
1.500
1.750
1.500
1.750
1.750
2.000
2.500
2.000
2.500
2.000
2.500
2.000
2.500
2.000
2.500
2.000
2.500
2.000
2.000
2.125
2.125
2.500
2.125
2.500
2.125
2.500
2.125
2.500
2.125
2.500
2.125
2.500
2.125
2.500
2.00
2.13
2.13
2.38
2.13
2.38
2.13
2.38
2.13
2.38
2.38
2.62
3.29
2.62
3.29
2.62
3.29
2.62
3.29
2.62
3.29
2.62
3.29
2.62
2.62
2.75
2.75
3.29
2.75
3.29
2.75
3.29
2.75
3.29
2.75
3.29
2.75
3.29
2.75
3.29
All 1VP & 2VP sheaves are furnished with standard key way and (2) 5/16-18 knurled set screws over each slot & in bore.
15
Light Duty Adjustable Sheaves
Bored-to-Size,
One Groove
VL Sheaves
Example 1VL25-5/8
VL Sheaves may be used with 3L,
4L, 5L, A and B Belts
VL
All VL sheaves are furnished with standard keyway and (1) 5/16-18 X 5/16 knurled
setscrew over keyway
Part
No.
1VL25
1VL30
1VL34
List
Price
11.80
12.20
12.30
L
L1
K
M
Bore
O.D.
2.5000
2.8700
3.1500
Max
0.781
0.781
1.000
F
Min
0.531
0.531
0.625
Max
0.625
0.625
0.875
G
Min
0.375
0.375
0.500
1.634
1.634
1.933
0.728
0.728
0.815
0.697
0.697
0.744
1VL40
15.00
3.7500
1.000
0.625
0.875
0.500
1.933
0.815
0.744
1VL44
19.00
4.1500
1.000
0.625
0.875
0.500
1.933
0.815
0.744
1VM50
30.00
4.7500
1.060
0.688
0.875
0.500
1.996
0.846
0.776
1.125
1.125
1.125
1.375
1.125
1.375
1.125
1.375
1.125
1.375
1/2, 5/8
1/2, 5/8
1/2, 5/8,
3/4
1/2, 5/8,
3/4, 7/8
1/2, 5/8,
3/4, 7/8
1/2, 5/8,
3/4, 7/8
Bored-to Size,
One Groove
AL Sheaves
Example: no keyway = AL54-5/8, with keyway = AL54/5/8KW
AL Sheaves may be used with 3L, 4L, A Belts
AL
AL Sheaves come with or without Keyway and are for Light
Applications - Fans, Air Conditioning Units, Furnace Blowers etc.
Part
LIST
No.
PRICE
O.D.
Pitch
F
L
P
BORE Hub O.D.
AL54
16.00
4.93
4.78
.593
1.062
.468 5/8, 3/4, 1
1.7
AL64
17.00
5.93
5.78
.593
1.062
.468 5/8, 3/4, 1
1.7
AL74
19.50
6.93
6.78
.593
1.062
.468 5/8, 3/4, 1
1.7
AL84
21.50
7.93
7.78
.593
1.062
.468 5/8, 3/4, 1
1.7
AL94
27.00
8.93
8.78
.593
1.062
.468
3/4, 1
1.9
AL104
29.00
9.93
9.78
.593
1.062
.468
3/4, 1
2.0
AL114
32.00
10.93
10.78
.593
1.062
.468
3/4, 1
2.0
AL124
38.50
11.93
11.78
.593
1.062
.468
3/4, 1
2.0
AM144
62.50
14.16
14.00
.687
1.750
.406
1
2.0
Rework Charges for:
Rebores, Keyways, Set Screws
available - Price available upon request
16
Installation Instructions
17
JayDee Interchange from Maska
Bored-To-Size
AK-MA
Single Groove
2AK-2MA
BK-MB
Double Groove
Single Groove
2BK-2MB
Double Groove
JayDee
Part No.
Maska Part
No.
JayDee
Part No.
Maska Part
No.
JayDee
Part No.
Maska Part
No.
JayDee
Part No.
Maska Part
No.
AK17
MA18
2AK20
2MA20
BK24
MB24
2BK25
2MB25
AK20
MA20
2AK21
2MA22
BK25
MB25
2BK27
2MB28
AK21
MA21
2AK22
2MA23
BK26
MB26
2BK28
2MB30
AK22
MA22
2AK23
2MA24
BK27
MB28
2BK30
2MB32
AK23
MA23
2AK25
2MA25
BK28
MB30
2BK32
2MB34
AK25
MA25
2AK26
2MA27
BK30
MB31
2BK34
2MB35
AK26
MA26
2AK27
2MA28
BK32
MB34
2BK36
2MB38
AK27
MA27
2AK28
2MA29
BK34
MB35
2BK40
2MB40
AK28
MA28
2AK30
2MA30
BK36
MB38
2BK45
2MB43
AK30
MA30
2AK32
2MA33
BK40
MB40
2BK47
2MB45
AK32
MA33
2AK34
2MA35
BK45
MB43
2BK50
2MB48
AK34
MA35
2AK39
2MA38
BK47
MB45
2BK52
2MB50
AK39
MA38
2AK41
2MA40
BK50
MB48
2BK55
2MB53
AK41
MA40
2AK44
2MA43
BK52
MB50
2BK57
2MB55
AK44
MA43
2AK46
2MA45
BK55
MB53
2BK60
2MB58
AK46
MA45
2AK49
2MA48
BK57
MB55
2BK62
2MB60
AK49
MA48
2AK51
2MA50
BK60
MB58
2BK65
2MB63
AK51
MA50
2AK54
2MA53
BK62
MB60
2BK67
2MB65
AK54
MA53
2AK56
2MA55
BK65
MB63
2BK70
2MB68
AK56
MA55
2AK59
2MA58
BK67
MB65
2BK80
2MB78
AK59
MA58
2AK61
2MA60
BK70
MB68
2BK90
2MB88
AK61
MA60
2AK64
2MA63
BK72
MB70
2BK100
2MB98
AK64
MA63
2AK74
2MA73
BK75
MB73
2BK110
2MB108
AK66
MA65
2AK84
2MA83
BK77
MB75
2BK120
2MB118
AK69
MA68
2AK94
2MA93
BK80
MB78
2BK130
2MB128
AK71
MA70
2AK104
2MA103
BK85
MB83
2BK140
2MB138
AK74
MA73
2AK114
2MA113
BK90
MB88
2BK160
2MB158
AK79
MA78
2AK124
2MA123
BK95
MB93
2BK190
2MB188
AK84
MA83
2AK134
2MA133
BK100
MB98
AK89
MA88
2AK144
2MA143
BK105
MB103
AK94
MA93
2AK154
2MA153
BK110
MB108
AK99
MA98
2AK184
2MA183
BK115
MB113
AK104
MA103
BK120
MB118
AK109
MA108
BK130
MB128
AK114
MA113
BK140
MB138
AK124
MA123
BK160
MB158
AK134
MA133
BK190
MB188
AK144
MA143
AK154
MA153
AK184
MA183
18
Jaydee Interchange from Maska
Light Duty Bushed Type
AKH-MAL
Single Groove
JayDee Maska Part
Part No.
No.
2AKH-2MAL
BKH-MBL
Double Groove
JayDee Maska Part
Part No.
No.
Single Groove
JayDee Maska Part
Part No.
No.
2BKH-2MBL
Double Groove
JayDee Maska Part
Part No.
No.
AK30H
MAL30
2AK30H
2MAL30
BK30H
MBL31
2BK32H
2MBL33
AK32H
MAL32
2AK32H
2MAL32
BK32H
MBL33
2BK34H
2MBL35
AK34H
MAL34
2AK34H
2MAL34
BK34H
MBL35
2BK36H
2MBL37
AK39H
MAL37
2AK39H
2MAL37
BK36H
MBL37
2BK40H
2MBL39
AK41H
MAL39
2AK41H
2MAL39
BK40H
MBL39
2BK45H
2MBL42
AK44H
MAL42
2AK44H
2MAL42
BK45H
MBL42
2BK47H
2MBL44
AK46H
MAL44
2AK46H
2MAL44
BK47H
MBL44
2BK50H
2MBL47
AK49H
MAL47
2AK49H
2MAL47
BK50H
MBL47
2BK52H
2MBL49
AK51H
MAL49
2AK51H
2MAL49
BK52H
MBL49
2BK55H
2MBL52
AK54H
MAL52
2AK54H
2MAL52
BK55H
MBL52
2BK57H
2MBL54
AK56H
MAL54
2AK56H
2MAL54
BK57H
MBL54
2BK60H
2MBL57
AK59H
MAL57
2AK59H
2MAL57
BK60H
MBL57
2BK62H
2MBL59
AK61H
MAL59
2AK61H
2MAL59
BK62H
MBL59
2BK65H
2MBL62
AK64H
MAL62
2AK64H
2MAL62
BK65H
MBL62
2BK67H
2MBL64
AK66H
MAL64
2AK74H
2MAL72
BK67H
MBL64
2BK70H
2MBL67
AK69H
MAL67
2AK84H
2MAL82
BK70H
MBL67
2BK80H
2MBL77
AK71H
MAL69
2AK94H
2MAL92
BK72H
MBL69
2BK90H
2MBL87
AK74H
MAL72
2AK104H
2MAL102
BK75H
MBL72
2BK100H
2MBL97
AK79H
MAL77
2AK114H
2MAL112
BK77H
MBL74
2BK110H
2MBL107
AK84H
MAL82
2AK124H
2MAL122
BK80H
MBL77
2BK120H
2MBL117
AK89H
MAL87
2AK134H
2MAL132
BK85H
MBL82
2BK130H
2MBL127
AK94H
MAL92
2AK144H
2MAL142
BK90H
MBL87
2BK140H
2MBL137
AK99H
MAL97
2AK154H
2MAL152
BK95H
MBL92
2BK160H
2MBL157
AK104H
MAL102
2AK184H
2MAL182
BK100H
MBL97
2BK190H
2MBL187
AK109H
MAL107
BK105H
MBL102
AK114H
MAL112
BK110H
MBL107
AK124H
MAL122
BK115H
MBL112
AK134H
MAL132
BK120H
MBL117
AK144H
MAL142
BK130H
MBL127
AK154H
MAL152
BK140H
MBL137
AK184H
MAL182
BK150H
MBL147
BK160H
MBL157
BK190H
MBL187
19
JayDee Interchange from Maska
Light Duty Bushed Type
Air Handling
Variable Pitch
AL/AM
Single Groove
VL/VM
1VP
Light Duty
Single Groove
JayDee
Part No
Maska Part
No.
JayDee
Part No
Maska Part
No.
AL54
AL64
AL74
AL84
AL94
AL104
AL114
AL124
AM144
MFAL54
MFAL64
MFAL74
MFAL84
MFAL94
MFAL104
MFAL114
MFAL124
MFAM144
1VL25
1VL30
1VL34
1VL40
1VL44
1VL50
MVL25
MVL30
MVL34
MVL40
MVL44
-
2VP
Double Groove
JayDee Part No
Maska
Part No.
1VP25
1VP30
1VP34
1VP40
1VP44
1VP50
1VP56
1VP60/1VP62/1VP65
1VP68/1VP71
1VP75
8325
8350
8400
8450
8550
8600
8670
8740
JayDee Part No
Maska
Part No.
2VP36
2VP42
2VP50
2VP56
2VP60/2VP62/2VP65
2VP68/2VP71
2VP75
D8350
D8400
D8450
D8550
D8600
D8670
D8740
PLEASE VISIT OUR WEBSITE: WWW.JDV-BELTS.COM
WE CARRY A FULL LINE OF BELTING FOR INDUSTRIAL, AGRICULTURAL,
OUTDOOR POWER EQUIPMENT, MILLING MACHINES, ATV'S/UTV'S,
AND SNOW MOBILES
20
Features/Benefits
Heavy Duty Stock Sheave & Bushing Combinations
QD Sheaves & Bushings
DST Sheaves & Bushings
TB Sheaves & Bushings
Sheaves available for belt
sizes: A/B, C, 3V, 5V and 8V
Sheaves available for A/B
section belts
Sheaves available for A/B section
belt
1-12 groove
1-4 groove
1-4 groove
Max. O.D. 63"
Max. O.D. 38"
Max. O.D. 38"
Bushing stock in JA thru W
sizes
Bushings SH-W include set
screw in flange over keyway.
Sheave/Bushing can be
reverse mounted (Bolts thru
sheave then into bushing OR
bolt thru bushing then into
sheave)
DST sheaves offer more sizes
from 3.75" O.D. up to 38.35"
O.D. as compared to QD and
TB.
Bushings stock in G-H-P1-P2Q1-Q2-R1 & R2
Longest LTB (length thru bore)
of all bushings
Bushings stock in sizes 1008 thru
5050
No flange or hub
Shortest LTB (length thru bore) of all
bushings
Flush mounting, no exposed bolts
Bushing and sheave use an
additional key between the
O.D. of bushing and I.D. of hub
to transmit torque
ALL bushings stocked in inch & metric sizes
Rework machining available from warehouse.
Manufactured to Industry Standards
21
QD Bushing Sheaves
Cast Iron Sheaves - Heavy Duty
Bushed, One and Two Groove
A-B QD Sheaves
Example: 1B34SH
For A & B V-Belts
Order QD bushings separately
Stock Bushings Located
On Pages 48-49-50
P.D.
O.D.
A
1 Groove F
B
Part No.
~ 1B34SH THRU 1B64SDS = 7/8
~ 1B66SDS THRU 1B300SF = 1
List
Price
3.75
3.00
3.40
1B34SH
27.00
3.95
3.20
3.60
1B36SH
28.00
1B38SH
4.15
3.40
3.80
29.00
4.35
3.60
4.00
1B40SH
30.00
4.55
3.80
4.20
1B42SH
31.00
1B44SH
4.75
4.00
4.40
32.00
4.95
4.20
4.60
1B46SDS
32.00
5.15
4.40
4.80
1B48SDS
33.00
1B50SDS
5.35
4.60
5.00
34.00
5.55
4.80
5.20
1B52SDS
35.00
1B54SDS
5.75
5.00
5.40
36.00
1B56SDS
5.95
5.20
5.60
37.00
6.15
5.40
5.80
1B58SDS
38.00
1B60SDS
6.35
5.60
6.00
40.00
6.55
5.80
6.20
1B62SDS
42.00
6.75
6.00
6.40
1B64SDS
44.00
1B66SDS
6.95
6.20
6.60
48.00
7.15
6.40
6.80
1B68SDS
50.00
7.35
6.60
7.00
1B70SDS
52.00
7.75
7.00
7.40
1B74SDS
56.00
8.35
7.60
8.00
1B80SDS
58.00
8.95
8.20
8.60
1B86SDS
62.00
9.35
8.60
9.00
1B90SDS
63.00
9.75
9.00
9.40
1B94SDS
64.00
11.35 10.60 11.00 1B110SDS
76.00
12.75 12.00 12.40 1B124SDS
90.00
13.95 13.20 13.60 1B136SDS
96.00
15.75 15.00 15.40
1B154SK
116.00
16.35 15.60 16.00
1B160SK
136.00
18.75 18.00 18.40
1B184SK
156.00
20.35 19.60 20.00
1B200SK
230.00
25.35 24.60 25.00
1B250SF
350.00
30.35 29.60 30.00
1B300SF
400.00
38.35 37.60 38.00
CALL
* = Can only be mounted from one direction
2 Groove F = 1 /34
Type
K
L
Part No.
List
Price
Type
K
L
D-1
D-1
D-1
C-1
C-1
C-1
C-1
C-1
C-1
C-1
C-1
C-1
C-1
C-2
C-2
C-2
C-2
C-2
C-2
C-2
C-2
C-3
C-3
C-3
C-3
C-3
C-3
F-3
F-3
F-3
F-3
F-3
F-3
0
0
0
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
1 1/4
1 1/4
*2B34SH
*2B36SH
*2B38SH
2B40SH
2B42SH
2B44SH
2B46SDS
2B48SDS
2B50SDS
2B52SDS
2B54SDS
2B56SDS
2B58SDS
2B60SDS
2B62SDS
2B64SDS
2B66SDS
2B68SDS
2B70SK
2B74SK
2B80SK
2B86SK
2B90SK
2B94SK
2B110SK
2B124SK
2B136SK
2B154SK
2B160SK
2B184SK
2B200SF
2B250SF
2B300SF
2B380SF
38.00
40.00
42.00
44.00
46.00
48.00
50.00
52.00
54.00
56.00
58.00
60.00
62.00
64.00
66.00
68.00
69.00
70.00
72.00
73.00
75.00
77.00
78.00
79.00
92.00
100.00
120.00
168.00
178.00
224.00
260.00
396.00
440.00
840.00
E-1
D-1
D-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-2
D-2
D-2
D-2
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
0
3/16
3/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
3/8
3/8
3/8
3/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
Note: Cast iron sheaves may not exceed 6500 FPM. This speed DOES NOT specify if dynamic balancing (2 plane)
is required. Contact customer service to verify whether dynamic balancing is required.
22
QD Bushing Sheaves
Bushed, Three and Four Groove
A-B QD Sheaves
Example: 3B34SH
For A & B V-Belts
On Pages 48-49-50
P.D.
O.D.
A
3 Groove F = 2 1/2
B
Part No.
List
Price
3.75
3.00
3.40 *3B34SH
44.00
3.95
3.20
3.60 *3B36SH
46.00
4.15
3.40
3.80 *3B38SH
48.00
3B40SH
4.35
3.60
4.00
50.00
4.55
3.80
4.20
3B42SH
52.00
4.75
4.00
4.40
3B44SH
54.00
3B46SD
4.95
4.20
4.60
56.00
5.15
4.40
4.80
3B48SD
58.00
5.35
4.60
5.00
3B50SD
60.00
3B52SD
5.55
4.80
5.20
62.00
5.75
5.00
5.40
3B54SD
64.00
3B56SD
5.95
5.20
5.60
66.00
3B58SD
6.15
5.40
5.80
68.00
6.35
5.60
6.00
3B60SD
70.00
3B62SD
6.55
5.80
6.20
72.00
6.75
6.00
6.40
3B64SD
76.00
6.95
6.20
6.60
3B66SD
78.00
3B68SD
7.15
6.40
6.80
80.00
7.35
6.60
7.00
3B70SK
82.00
7.75
7.00
7.40
3B74SK
84.00
8.35
7.60
8.00
3B80SK
88.00
8.95
8.20
8.60
3B86SK
96.00
9.35
8.60
9.00
3B90SK
100.00
9.75
9.00
9.40
3B94SK
104.00
11.35 10.60 11.00 3B110SK 124.00
12.75 12.00 12.40 3B124SK 144.00
13.95 13.20 13.60 3B136SK 156.00
15.75 15.00 15.40 3B154SK 200.00
16.35 15.60 16.00 3B160SK 212.00
18.75 18.00 18.40 3B184SK 244.00
20.35 19.60 20.00 3B200SF 324.00
25.35 24.60 25.00 3B250SF 440.00
30.35 29.60 30.00 3B300SF 500.00
38.35 37.60 38.00 3B380E
880.00
4 Groove F = 3 1/4
Type
K
L
Part No.
List
Price
Type
K
L
E-1
D-1
D-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
D-3
D-3
D-3
D-3
0
3/16
3/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
5/8
5/8
5/8
5/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15-16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 3/4
*4B34SD
*4B36SD
*4B38SD
*4B40SD
*4B42SD
*4B44SD
4B46SD
4B48SD
4B50SD
4B52SD
4B54SD
4B56SD
4B58SD
4B60SD
4B62SD
4B64SD
4B66SD
4B68SD
4B70SK
4B74SK
4B80SK
4B86SK
4B90SK
4B94SK
4B110SK
4B124SK
4B136SK
4B154SF
4B160SF
4B184SF
4B200SF
4B250E
4B300E
4B380E
65.00
67.00
69.00
71.00
73.00
75.00
77.00
79.00
81.00
83.00
85.00
87.00
89.00
91.00
93.00
97.00
101.00
105.00
109.00
113.00
117.00
125.00
132.00
139.00
153.00
171.00
205.00
225.00
245.00
261.00
365.00
481.00
561.00
982.00
E-1
E-1
E-1
E-1
E-1
E-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
5/16
5/16
5/16
0
0
0
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15-16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2.3/4
23
QD Bushing Sheaves
Bushed, Five and Six Groove
A-B QD Sheaves
Example: 5B34SD
For A & B V-Belts
On pages 48-49-50
P.D.
O.D.
A
5 Groove F = 4
B
Part No.
List
Price
3.75
3.00
3.40 *5B34SD
74.00
3.95
3.20
3.60 *5B36SD
76.00
4.15
3.40
3.80 *5B38SD
78.00
4.35
3.60
4.00 *5B40SD
80.00
4.55
3.80
4.20 *5B42SD
82.00
4.75
4.00
4.40 *5B44SD
84.00
4.95
4.20
4.60 5B46SD
86.00
5.15
4.40
4.80 5B48SD
90.00
5.35
4.60
5.00 5B50SD
92.00
5.55
4.80
5.20 5B52SD
94.00
5.75
5.00
5.40 5B54SK
96.00
5.95
5.20
5.60 5B56SK
98.00
6.15
5.40
5.80 5B58SK
100.00
6.35
5.60
6.00 5B60SK
106.00
6.55
5.80
6.20 5B62SK
112.00
6.75
6.00
6.40 5B64SK
116.00
6.95
6.20
6.60 5B66SK
120.00
7.15
6.40
6.80 5B68SK
124.00
7.35
6.60
7.00
5B70SF
132.00
7.75
7.00
7.40
5B74SF
150.00
8.35
7.60
8.00
5B80SF
154.00
8.95
8.20
8.60
5B86SF
164.00
9.75
9.00
9.40
5B94SF
172.00
11.35 10.60 11.00 5B110SF
194.00
12.75 12.00 12.40 5B124SF
208.00
13.95 13.20 13.60 5B136SF
240.00
15.75 15.00 15.40 5B154SF
268.00
16.35 15.60 16.00 5B160SF
294.00
18.75 18.00 18.40 5B184SF
316.00
20.35 19.60 20.00 5B200E
390.00
25.35 24.60 25.00 5B250E
500.00
30.35 29.60 30.00 5B300E
696.00
38.35 37.60 38.00 5B380E 1,080.00
6 Groove F = 4 3/4
Type
K
L
Part No.
List
Price
Type
K
L
E-1
E-1
E-1
E-1
E-1
E-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
5/16
5/16
5/16
0
0
0
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5-16
1 5/16
1 1/4
1 1/4
1 1/4
1 1/4
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15-16
1 15/16
1 15/16
1 15/16
1 15/16
1 15-16
1 15/16
1 15-16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
*6B34SD
*6B36SD
*6B38SD
*6B40SD
*6B42SD
*6B44SD
6B46SD
6B48SD
6B50SD
6B52SD
6B54SK
6B56SK
6B58SK
6B60SK
6B62SK
6B64SK
6B66SK
6B68SK
6B70SF
6B74SF
6B80SF
6B86SF
6B94SF
6B110SF
6B124SF
6B136SF
6B154SF
6B160SF
6B184SF
6B200E
6B250E
6B300E
6B380E
98.00
100.00
102.00
104.00
106.00
110.00
112.00
114.00
116.00
118.00
120.00
122.00
124.00
126.00
130.00
134.00
139.00
142.00
150.00
204.00
208.00
220.00
230.00
248.00
276.00
280.00
300.00
328.00
348.00
464.00
580.00
780.00
1,120.00
E-1
E-1
E-1
E-1
E-1
E-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
5/16
5/16
5/16
0
0
0
1 3/16
1 3/16
1 3/16
1 3/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 3/8
1 3/8
1 3/8
1 3/8
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
24
QD Bushing Sheaves
Bushed, Seven and Eight Groove
A-B QD Sheaves
Example: 7B54SK
On pages 48-49-50
P.D.
7 Groove F = 5 1/2
8 Groove F = 6 1/4
O.D.
A
B
Part No.
List
Price
Type
K
L
Part No.
List
Price
Type
K
L
5.75
5.95
6.15
6.35
6.55
6.75
6.95
7.15
7.35
7.75
8.95
9.75
11.35
12.75
13.95
15.75
16.35
18.75
20.35
25.35
30.35
38.35
5.00
5.20
5.40
5.60
5.80
6.00
6.20
6.40
6.60
7.00
8.20
9.00
10.60
12.00
13.20
15.00
15.60
18.00
19.60
24.60
29.60
37.60
5.40
5.60
5.80
6.00
6.20
6.40
6.60
6.80
7.00
7.40
8.60
9.40
11.00
12.40
13.60
15.40
16.00
18.40
20.00
25.00
30.00
38.00
7B54SK
7B56SK
7B58SK
7B60SK
7B62SF
7B64SF
7B66SK
7B68SF
7B70SF
7B74SF
7B86E
7B94E
7B110E
7B124E
7B136E
7B154E
7B160E
7B184F
180.00
184.00
188.00
192.00
196.00
200.00
208.00
212.00
260.00
284.00
292.00
300.00
356.00
372.00
452.00
500.00
572.00
636.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-3
A-3
A-3
A-3
A-3
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
8B54SK
8B56SK
8B58SK
8B60SK
8B62SF
8B64SK
8B66SF
8B68SF
8B70SF
8B74SF
8B86E
8B94E
8B110E
8B124E
8B136E
8B154E
8B160E
8B184F
8B200F
8B250F
8N300F
8B380F
180.00
184.00
188.00
192.00
196.00
200.00
208.00
212.00
260.00
284.00
292.00
300.00
356.00
372.00
452.00
500.00
572.00
636.00
690.00
880.00
1,260.00
1,740.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
25
QD Bushing Sheaves
Cast Iron Sheaves
Bushed, Ten Groove
A-B OD Sheaves
Example: 10B54SK
On pages 48-49-50
P.D.
O.D.
A
B
Part No.
5.75
5.95
6.15
6.35
6.55
6.75
6.95
7.15
7.35
7.75
8.95
9.75
11.35
12.75
13.95
15.75
16.35
18.75
20.35
25.35
30.35
38.35
5.00
5.20
5.40
5.60
5.80
6.00
6.20
6.40
6.60
7.00
8.20
9.00
10.60
12.00
13.20
15.00
15.60
18.00
19.60
24.60
29.60
37.60
5.40
5.60
5.80
6.00
6.20
6.40
6.60
6.80
7.00
7.40
8.60
9.40
11.00
12.40
13.60
15.40
16.00
18.40
20.00
25.00
30.00
38.00
10B54SK
10B56SK
10B58SK
10B60SK
10B62SF
10B64SF
10B66SF
10B68SF
10B70SF
10B74SF
10B86E
10B94E
10B110E
10B124E
10B136F
10B154F
10B160F
10B184F
10B200F
10B250F
10B300F
10B380J
10 Groove F = 7 3/4
List
Bush
Type
Price
280.00
SK
A-1
288.00
SK
A-1
296.00
SK
A-1
304.00
SK
A-1
312.00
SF
A-1
320.00
SF
A-1
332.00
SF
A-1
344.00
SF
A-1
352.00
SF
A-1
360.00
SF
A-1
372.00
E
A-1
420.00
E
A-2
520.00
E
A-2
532.00
E
A-3
636.00
F
A-3
680.00
F
A-3
760.00
F
A-3
800.00
F
A-3
860.00
F
A-3
1,160.00
F
A-3
1,380.00
F
A-3
1,780.00
J
A-3
K
L
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
3 1/8
3 1/8
3 1/8
3 1/8
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
1 9/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
26
QD Bushing Sheaves
Cast Iron Sheaves
C QD Sheaves
Example: 1C60SK
For C V-Belts
On pages 48-49-50
Diameters
O.D.
P.D.
Part No.
6.40
7.40
7.90
8.40
8.90
9.40
9.90
10.40
10.90
11.40
12.40
13.40
14.40
15.40
16.40
18.40
20.40
24.40
27.40
30.40
6.00
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
16.00
18.00
20.00
24.00
27.00
30.00
1C60SK
1C70SF
1C75SF
1C80SF
1C85SF
1C90SF
1C95SF
1C100SF
1C105SF
1C110SF
1C120SF
1C130SF
1C140SF
1C150SF
1C160SF
1C180SF
1C200SF
1C240SF
1 Groove F = 1 3/8
List
Type
K
Price
114.00
115.00
120.00
124.00
128.00
132.00
136.00
140.00
152.00
172.00
184.00
240.00
260.00
270.00
280.00
300.00
320.00
360.00
C-1
C-1
C-1
C-1
C-2
C-2
C-2
C-2
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
L
Part No.
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2C60SF
2C70SF
2C75SF
2C80SF
2C85SF
2C90SF
2C95SF
2C100SF
2C105SF
2C110SF
2C120SF
2C130SF
2C140SF
2C150SF
2C160SF
2C180SF
2C200SF
2C240SF
2C270F
2C300F
2 Groove F = 2 3/8
List
Type
K
Price
132.00
134.00
139.00
144.00
148.00
152.00
160.00
176.00
188.00
200.00
210.00
250.00
270.00
280.00
290.00
310.00
340.00
460.00
550.00
620.00
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-3
A-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
D-3
F-3
F-3
7/8
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
1/8
1/8
L
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
3 3/4
3 3/4
27
QD Bushing Sheaves
C QD Sheaves
Example: 3C50SD
For C V-Belts
On pages 48-49-50
Diameters
O.D.
P.D.
Part No.
5.40
5.40
5.80
5.90
6.00
6.40
7.40
7.90
8.40
8.90
9.40
9.90
10.40
10.90
11.40
12.40
13.40
14.40
15.40
16.40
18.40
20.40
24.40
27.40
30.40
36.40
44.40
50.40
5.00
5.00
5.40
5.50
5.60
6.00
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
16.00
18.00
20.00
24.00
27.00
30.00
36.00
44.00
50.00
3C50SD
*3C50SK
3C54SD
3C55SD
3C56SD
3C60SF
3C70SF
3C75SF
3C80E
3C85E
3C90E
3C95E
3C100E
3C105E
3C110E
2C120E
3C130E
3C140E
3C150E
3C160E
3C180E
3C200E
3C240E
3C270F
3C300F
3C360F
3C440F
3C500F
3 Groove F = 3 3/8
List
Type
K
Price
136.00
143.00
144.00
146.00
148.00
150.00
152.00
154.00
156.00
176.00
188.00
200.00
220.00
230.00
240.00
250.00
290.00
320.00
324.00
330.00
350.00
400.00
480.00
580.00
640.00
980.00
1,720.00
1,920.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
B-1
B-1
B-1
B-1
B-2
B-2
B-3
B-3
B-3
B-3
B-3
B-3
B-3
A-3
A-3
C-3
C-3
C-3
C-3
C-3
1 1/4
1 1/4
1 5/16
1 5/16
1 5/16
7/8
1 5/16
1 5/16
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1
1
7/8
7/8
7/8
13/16
13/16
L
Part No.
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15-16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4C50SD
*4C50SK
4C54SD
4C55SD
4C56SD
4C60SF
4C70SF
4C75SF
4C80E
4C85E
4C90E
4C95E
4C100E
4C105E
4C110E
4C120E
4C130E
4C140E
4C150E
4C160E
4C180E
4C200E
4C240F
4C270F
4C300F
4C360F
4C440J
4C500J
4 Groove F = 4 3/8
List
Type
K
Price
156.00
165.00
157.00
158.00
159.00
162.00
164.00
172.00
196.00
208.00
224.00
228.00
240.00
260.00
272.00
300.00
336.00
364.00
382.00
420.00
430.00
450.00
560.00
660.00
760.00
1,120.00
1,800.00
2,120.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
1 1/4
1 1/4
1 5/16
1 5/16
1 5/16
7/8
1 9/16
1 9/16
2
2
2
2
2
2
2
2
2
2
2
2
2
1 1/2
1 5/16
1 5/16
1 5/16
1 5/16
1 9/16
1 9/16
L
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
* Small OD sheaves used heavily in the oil industry
28
QD Bushing Sheaves
Bushed, Five and Six Groove
C QD Sheaves
Example: 5C60SF
For C V-Belts
On Pages 48-49-50
Diameters
O.D.
P.D.
Part No.
5.4
6.40
7.40
7.90
8.40
8.90
9.40
9.90
10.40
10.90
11.40
12.40
13.40
14.40
15.40
16.40
18.40
20.40
24.40
27.40
30.40
36.40
44.40
50.40
5
6.00
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
16.00
18.00
20.00
24.00
27.00
30.00
36.00
44.00
50.00
*5C50SK
5C60SF
5C70SF
5C75SF
5C80E
5C85E
5C90E
5C95E
5C100E
5C105E
5C110E
5C120E
5C130E
5C140E
5C150E
5C160E
5C180E
5C200F
5C240F
5C270F
5C300F
5C360J
5C440J
5C500J
5 Groove F = 5 3/8
List
Type
K
Price
217.00
A-1
7/8
175.00
177.00
225.00
237.00
253.00
257.00
273.00
276.00
296.00
332.00
336.00
376.00
380.00
410.00
430.00
480.00
600.00
640.00
760.00
840.00
1,180.00
1,940.00
2,280.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
7/8
1 15/16
1 15/16
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
1 5/16
1 5/16
1 5/16
1 5/16
1 9/16
1 9/16
1 9/16
L
Part No.
1 15/16
*6C50SK
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
6C60SF
6C70SF
6C75SF
6C80E
6C85E
6C90F
6C95F
6C100F
6C105F
6C110F
6C120F
6C130F
6C140F
6C150F
6C160F
6C180F
6C200F
6C240F
6C270J
6C300J
6C360J
6C440J
6C500M
6 Groove F = 6 3/8
List
Type
K
Price
257.00
A-1
7/8
1 15/16
244.00
248.00
264.00
280.00
288.00
296.00
316.00
328.00
336.00
356.00
400.00
444.00
480.00
500.00
520.00
560.00
620.00
720.00
880.00
1,040.00
1,300.00
2,040.00
2,680.00
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
7/8
1 15/16
1 15/16
2 3/8
2 3/8
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 15/16
1 15/16
1 9/16
1 9/16
1 9/16
1 9/16
1 15/16
L
* Small OD sheaves used heavily in the oil industry
29
QD Bushing Sheaves
Bushed, Seven and Eight Groove
C QD Sheaves
Example: 7C70SF
On Pages 48-49-50
Diameters
7 Groove F = 7 3/8
List
K
Type
Price
O.D.
P.D.
Part No.
7.40
8.40
8.90
9.40
9.90
10.40
10.90
11.40
12.40
13.40
14.40
15.40
16.40
18.40
20.40
24.40
27.40
30.40
36.40
44.40
50.40
7.00
8.00
8.50
9.00
9.50
10.00
10.50
11.00
12.00
13.00
14.00
15.00
16.00
18.00
20.00
24.00
27.00
30.00
36.00
44.00
50.00
7C70SF
7C80E
7C85E
7C90F
7C95F
7C100F
7C105F
7C110F
7C120F
7C130F
7C140F
7C150F
7C160F
7C180F
320.00
390.00
400.00
410.00
420.00
430.00
450.00
480.00
520.00
560.00
650.00
720.00
740.00
860.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-3
A-3
7C240J
1,020.00
A-3
L
Part No.
3 1/8
3 1/4
3 1/4
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
2 1/16
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 5/16
3 3/4
8C70SF
8C80E
8C85E
8C90F
8C95F
8C100F
8C105F
8C110F
8C120F
8C130F
8C140F
8C150F
8C160F
8C180F
8C200J
8C240J
8C270J
8C300J
8C360M
8C440M
8C500M
8 Groove F = 8 3/8
List
Type
K
Price
320.00
390.00
400.00
410.00
420.00
430.00
450.00
480.00
520.00
560.00
650.00
720.00
740.00
860.00
870.00
1,020.00
1,120.00
1,280.00
1,600.00
2,560.00
3,000.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
C-3
C-3
3 1/8
3 1/4
3 1/4
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
1 9/16
1 9/16
1 9/16
1 9/16
1 15/16
1 15/16
1 15/16
L
2 1/16
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
30
QD Bushing Sheaves
Bushed, Ten Groove
C QD Sheaves
Example: 10C80E
On Pages 48-49-50
Diameters
10 Groove F = 10 3/8
List
K
Type
Price
O.D.
P.D.
Part No.
L
8.40
8.00
10C80E
460.00
A-1
3 1/4
2 3/4
8.90
8.50
10C85E
480.00
A-1
3 1/4
2 3/4
9.40
9.00
10C90J
500.00
A-1
3 9/16
4 5/8
9.90
9.50
10C95J
512.00
A-1
3 9/16
4 5/8
10.40
10.00
10C100J
520.00
A-1
3 9/16
4 5/8
10.90
10.50
10C105J
580.00
A-1
3 9/16
4 5/8
11.40
11.00
10C110J
600.00
A-1
3 9/16
4 5/8
12.40
12.00
10C120J
760.00
A-1
3 9/16
4 5/8
13.40
13.00
10C130J
840.00
A-2
3 9/16
4 5/8
14.40
14.00
10C140J
900.00
A-2
3 9/16
4 5/8
16.40
16.00
10C160J
960.00
A-3
3 9/16
4 5/8
18.40
18.00
10C180J
1,080.00
A-3
3 9/16
4 5/8
20.40
20.00
10C200J
1,120.00
A-3
3 9/16
4 5/8
24.40
24.00
10C240M
1,360.00
A-3
3 9/16
6 3/4
30.40
30.00
10C300M
1,760.00
A-3
1 15/16
6 3/4
36.40
36.00
10C360M
2,560.00
A-3
1 15/16
6 3/4
44.40
44.00
10C440M
2,800.00
A-3
1 15/16
6 3/4
50.40
50.00
10C500M
3,500.00
A-3
1 15/16
6 3/4
31
QD Bushing Sheaves
3V QD Sheaves
Example: 1/3V220JA
For 3V OR 3VX BELTS
On pages 48-49-50
Diameters
O.D.
P.D.
2.20
2.35
2.50
2.65
2.80
3.00
3.15
3.35
3.65
4.12
4.50
4.75
5.00
5.30
5.60
6.00
6.50
6.90
8.00
10.60
14.00
19.00
25.00
2.15
2.30
2.45
2.60
2.75
2.95
3.10
3.30
3.60
4.07
4.45
4.70
4.95
5.25
5.55
5.95
6.45
6.85
7.95
10.55
13.95
18.95
24.95
1 Groove
F = 11/16
Part
No.
1/3V220JA
1/3V235JA
1/3V250JA
1/3V265JA
1/3V280JA
1/3V300JA
1/3V315JA
1/3V335JA
1/3V365SH
1/3V412SH
1/3V450SH
1/3V475SH
1/3V500SH
1/3V530SH
1/3V560SH
1/3V600SH
1/3V650SH
1/3V690SH
1/3V800SDS
1/3V1060SDS
1/3V1400SK
1/3V1900SK
~1/3V 800SDS & 1/3V1060SDS F=3/4
2 Groove F = 1 3/32
~1/3V1400 SK & 1/3V1900SK F = 13/16
List
Price
Type
K
L
20.00
21.00
21.80
22.60
23.40
24.30
25.50
27.00
28.00
29.00
30.50
32.50
34.50
36.50
38.50
40.60
44.70
52.80
60.90
111.00
121.00
200.00
E-1
E-1
E-1
C-1
C-1
C-1
C-1
C-1
G-1
G-1
G-1
G-1
G-1
G-2
G-2
G-2
G-2
G-3
G-3
G-3
G-3
G-3
7/16
7/16
7/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
0
0
7/16
7/16
1
1
1
1
1
1
1
1
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
Part
No.
List
Price
Type
K
L
2/3V220JA
2/3V235JA
2/3V250JA
2/3V265JA
2/3V280JA
2/3V300JA
2/3V315JA
2/3V335SH
2/3V365SH
2/3V412SH
2/3V450SH
2/3V475SH
2/3V500SH
2/3V530SH
2/3V560SH
2/3V600SH
2/3V650SDS
2/3V690SDS
2/3V800SDS
2/3V1060SK
2/3V1400SK
2/3V1900SK
2/3V2500SF
29.00
30.00
31.00
32.00
33.00
34.00
35.00
36.00
37.00
40.00
44.00
48.00
52.00
54.00
56.00
58.00
64.00
70.00
72.00
110.00
174.00
204.00
360.00
E-1
E-1
E-1
D-1
D-1
D-1
D-1
D-1
D-1
D-1
D-1
D-1
D-1
D-1
D-2
D-2
D-2
D-2
D-3
F-3
F-3
F-3
E-3
7/16
7/16
7/16
1/8
1/8
1/8
1/8
9/64
9/64
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
5/16
5/16
5/32
5/32
5/32
1/4
1
1
1
1
1
1
1
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
2 1/16
32
QD Bushing Sheaves
3V QD Sheaves
Example: 3/3V250JA
For 3V OR 3VX BELTS
On pages 48-49-50
Diameters
O.D.
P.D.
Part No.
2.50
2.65
2.80
3.00
3.15
3.35
3.65
4.12
4.50
4.75
5.00
5.30
5.60
6.00
6.50
6.90
8.00
10.60
14.00
19.00
25.00
33.50
2.45
2.60
2.75
2.95
3.10
3.30
3.60
4.07
4.45
4.70
4.95
5.25
5.55
5.95
6.45
6.85
7.95
10.55
13.95
18.95
24.95
33.45
3/3V250JA
3/3V265JA
3/3V280JA
3/3V300SH
3/3V315SH
3/3V335SH
3/3V365SH
3/3V412SH
3/3V450SDS
3/3V475SDS
3/3V500SDS
3/3V530SDS
3/3V560SDS
3/3V600SDS
3/3V650SDS
3/3V690SDS
3/3V800SK
3/3V1060SK
3/3V1400SK
3/3V1900SF
3/3V2500SF
3/3V3350SF
3 Groove F = 1 1/2
List
K
Type
Price
36.00
37.00
38.00
39.00
40.00
42.00
43.00
44.00
50.00
54.00
58.00
60.00
62.00
66.00
68.00
80.00
86.00
126.00
184.00
216.00
400.00
720.00
E-1
D-1
D-1
E-1
E-1
D-1
D-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
C-3
C-3
C-3
C-3
C-3
C-3
7/16
1/8
1/8
5/16
5/16
1/8
1/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
1/4
1/4
1/4
1/4
1/4
1/4
L
Part No.
1
1
1
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
4/3V265JA
4/3V280JA
4/3V300SH
4/3V315SH
4/3V335SH
4/3V365SH
4/3V412SH
4/3V450SDS
4/3V475SDS
4/3V500SDS
4/3V530SDS
4/3V560SDS
4/3V600SK
4/3V650SK
4/3V690SK
4/3V800SK
4/3V1060SK
4/3V1400SK
4/3V1900SF
4/3V2500SF
4/3V3350E
4 Groove F = 1 29/32
List
Type
K
Price
43.00
44.00
45.00
46.00
47.00
48.00
50.00
52.00
56.00
60.00
64.00
66.00
70.00
72.00
82.00
88.00
128.00
196.00
252.00
412.00
780.00
D-1
D-1
E-1
E-1
D-1
D-1
A-1
A-1
A-1
A-1
A-1
A-1
D-1
D-2
D-2
D-3
D-3
D-3
C-3
C-3
C-3
0
0
0
0
1/8
1/8
13/16
13/16
13/16
13/16
13/16
13/16
5/8
5/8
5/8
5/8
5/8
5/8
21/32
21/32
9/32
L
1
1
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
33
QD Bushing Sheaves
Bushed, Five, Six, Seven and Eight Groove
3V QD Sheaves
Example: 5/3V475SDS
For 3V OR 3VX BELTS
On pages 48-49-50
Diameters
O.D.
P.D.
Part No.
4.75
5.00
5.30
5.60
6.00
6.50
6.90
8.00
10.60
14.00
19.00
25.00
33.50
4.70
4.95
5.25
5.55
5.95
6.45
6.85
7.95
10.55
13.95
18.95
24.95
33.45
5/3V475SDS
5/3V500SDS
5/3V530SK
5/3V560SK
5/3V600SK
5/3V650SK
5/3V690SK
5/3V800SK
5/3V1060SK
5/3V1400SF
5/3V1900SF
5/3V2500E
5/3V3350E
Diameters
O.D.
P.D.
Part No.
4.75
5.00
5.30
5.60
6.00
6.50
6.90
8.00
10.60
14.00
19.00
25.00
33.50
4.70
4.95
5.25
5.55
5.95
6.45
6.85
7.95
10.55
13.95
18.95
24.95
33.45
7/3V475SK
7/3V500SK
7/3V530SK
7/3V560SK
7/3V600SK
7/3V650SK
7/3V690SK
7/3V800SF
7/3V1060SF
7/3V1400E
7/3V1900E
5 Groove F = 2 5/16
List
Type
K
Price
62.00
68.00
70.00
76.00
78.00
80.00
88.00
94.00
130.00
232.00
292.00
436.00
850.00
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
C-3
C-3
13/16
13/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
7/8
7/8
11/16
11/16
L
Part No.
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
6/3V475SK
6/3V500SK
6/3V530SK
6/3V560SK
6/3V600SK
6/3V650SK
6/3V690SK
6/3V800SK
6/3V1060SF
6/3V1400SF
6/3V1900E
6/3V2500E
6/3V3350E
7 Groove F = 3 1/8
List
Type
K
Price
106.00
110.00
124.00
126.00
128.00
130.00
132.00
148.00
210.00
284.00
444.00
D-1
D-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
1/8
1/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 1/8
1 1/8
1 1/4
1 1/4
L
Part No.
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
8/3V475SK
8/3V500SK
8/3V530SK
8/3V560SK
8/3V600SK
8/3V650SK
8/3V690SK
8/3V800SF
8/3V1060SF
8/3V1400E
8/3V1900E
8/3V2500E
8/3V3350F
6 Groove F = 2 23/32
List
Type
K
Price
84.00
86.00
88.00
90.00
92.00
94.00
112.00
124.00
144.00
248.00
308.00
452.00
900.00
D-1
D-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-3
B-3
B-3
B-3
1/8
1/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
7/8
7/8
1 3/32
1 3/32
1 3/32
8 Groove F = 3 17/32
List
Type
K
Price
106.00
110.00
124.00
126.00
128.00
130.00
132.00
148.00
210.00
284.00
444.00
520.00
980.00
D-1
D-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
A-3
B-3
1/8
1/8
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 1/8
1 1/8
1 1/4
1 1/4
1 1/4
1 1/32
L
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
L
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
3 3/4
34
QD Bushing Sheaves
Bushed, Ten Groove
Example: 10/3V475SK
For 3V OR 3VX BELTS
On pages 48-49-50
Diameters
O.D.
P.D.
Part No.
4.75
5.00
5.30
5.60
6.00
6.50
6.90
8.00
10.60
14.00
19.00
25.00
33.50
4.70
4.95
5.25
5.55
5.95
6.45
6.85
7.95
10.55
13.95
18.95
24.95
33.45
10/3V475SK
10/3V500SK
10/3V530SK
10/3V560SK
10/3V600SK
10/3V650SK
10/3V690SK
10/3V800SF
10/3V1060E
10/3V1400E
10/3V1900E
10/3V2500F
10/3V3350F
10 Groove F = 4 11/32
List
Type
K
Price
126.00
128.00
130.00
132.00
134.00
144.00
146.00
194.00
250.00
320.00
472.00
596.00
1,100.00
D-1
D-1
A-1
A-1
A-1
A-1
A-2
A-2
A-3
A-3
A-3
A-3
A-3
1/8
1/8
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 1/2
1 1/4
1 1/4
1 1/4
1 5/16
1 5/16
L
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
Note: Cast iron sheaves may not exceed 6500 FPM. This speed DOES NOT specify if dynamic balancing
(2 plane) is required. Contact customer service to verify whether dynamic balancing is required.
35
QD Bushing Sheaves
Cast Iron Sheaves Heavy Duty
Bushed, Two and Three Grooved
5V QD Sheaves
Example: 2/5V440SH
For 5V OR 5VX BELTS
Stock Bushings Located on pgs 48-49-50
Diameters
O.D.
P.D.
4.40
4.65
4.90
5.20
5.50
5.90
6.30
6.70
7.10
7.50
8.00
8.50
9.00
9.25
9.75
10.30
10.90
11.30
11.80
12.50
13.20
14.00
15.00
16.00
18.70
21.20
23.60
28.00
31.50
37.50
50.00
4.30
4.55
4.80
5.10
5.40
5.80
6.20
6.60
7.00
7.40
7.90
8.40
8.90
9.15
9.65
10.20
10.80
11.20
11.70
12.40
13.10
13.90
14.90
15.90
18.60
21.10
23.50
27.90
31.40
37.40
49.90
2 Groove F = 1 11/16
List
Part No.
Type
K
Price
2/5V440SH
73.00
A-1 11/16
2/5V465SDS 79.00
E-1
3/16
2/5V490SDS 85.00
A-1 11/16
2/5V520SDS 91.00
A-1 11/16
2/5V550SDS 97.00
A-1 11/16
2/5V590SDS 103.00 A-1 11/16
2/5V630SK
109.00 C-1
7/16
2/5V670SK
115.00 C-1
7/16
2/5V710SK
120.00 C-1
7/16
2/5V750SK
122.00 C-1
7/16
2/5V800SK
124.00 C-2
7/16
2/5V850SK
128.00 C-2
7/16
2/5V900SK
136.00 C-2
7/16
2/5V925SK
144.00 C-2
7/16
2/5V975SK
148.00 C-3
7/16
2/5V1030SK 152.00 C-3
7/16
2/5V1090SK 156.00 C-3
7/16
2/5V1130SK 160.00 C-3
7/16
2/5V1180SK 162.00 C-3
7/16
2/5V1250SF 164.00 C-3
7/16
2/5V1320SF 176.00 C-3
7/16
2/5V1400SF 230.00 C-3
7/16
2/5V1500SF 234.00 C-3
7/16
2/5V1600SF 252.00 C-3
7/16
2/5V1870SF 300.00 C-3
7/16
2/5V2120SF 416.00 C-3
7/16
2/5V2360E
480.00 C-3
1/16
2/5V2800E
490.00 C-3
1/16
L
Part No.
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
3/5V440SDS
3/5V465SDS
3/5V490SDS
3/5V520SDS
3/5V550SDS
3/5V590SDS
3/5V630SK
3/5V670SK
3/5V710SF
3/5V750SF
3/5V800SF
3/5V850SF
3/5V900SF
3/5V925SF
3/5V975SF
3/5V1030SF
3/5V1090SF
3/5V1130SF
3/5V1180SF
3/5V1250E
3/5V1320E
3/5V1400E
3/5V1500E
3/5V1600E
3/5V1870E
3/5V2120E
3/5V2360E
3/5V2800E
3/5V3150F
3/5V3750F
3/5V5000F
3 Groove F = 2 3/8
List
K
Type
Price
79.00
E-1
0
85.00
E-1
0
91.00
A-1 1 1/16
97.00
A-1 1 1/16
103.00
A-1 1 1/16
109.00
A-1 1 1/16
115.00
A-1 1 1/16
121.00
A-1
1 1/8
128.00
A-1
1 1/8
134.00
A-1
1 1/8
142.00
A-1
1 1/8
146.00
A-2
1 1/8
150.00
A-2
1 1/8
156.00
A-2
1 1/8
162.00
A-2
1 1/8
172.00
A-2
1 1/8
176.00
A-2
1 1/8
180.00
A-3
1 1/8
194.00
A-3
1 1/8
202.00
C-3
3/4
212.00
C-3
3/4
258.00
C-3
3/4
274.00
C-3
3/4
282.00
C-3
3/4
328.00
C-3
3/4
440.00
C-3
3/4
500.00
C-3
3/4
540.00
C-3
3/4
920.00
F-3
1/8
1,180.00 F-3
1/8
1,780.00 F-3
1/8
L
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
36
QD Bushing Sheaves
Bushed, Four and Five Groove
5V QD Sheaves
Example: 4/5V440SD
For 5V OR 5VX BELTS
Stock Bushings Located on pgs 48-49-50
Diameters
O.D.
P.D.
Part No.
4.40
4.65
4.90
5.20
5.50
5.90
6.30
6.70
7.10
7.50
8.00
8.50
9.00
9.25
9.75
10.30
10.90
11.30
11.80
12.50
13.20
14.00
15.00
16.00
18.70
21.20
23.60
28.00
31.50
37.50
50.00
4.30
4.55
4.80
5.10
5.40
5.80
6.20
6.60
7.00
7.40
7.90
8.40
8.90
9.15
9.65
10.20
10.80
11.20
11.70
12.40
13.10
13.90
14.90
15.90
18.60
21.10
23.50
27.90
31.40
37.40
45.90
4/5V440SD
4/5V465SD
4/5V490SD
4/5V520SD
4/5V550SD
4/5V590SD
4/5V630SK
4/5V670SK
4/5V710SF
4/5V750SF
4/5V800E
4/5V850E
4/5V900E
4/5V925E
4/5V975E
4/5V1030E
4/5V1090E
4/5V1130E
4/5V1180E
4/5V1250E
4/5V1320E
4/5V1400E
4/5V1500E
4/5V1600E
4/5V1870E
4/5V2120E
4/5V2360F
4/5V2800F
4/5V3150F
4/5V3750F
4/5V5000J
4 Groove F = 3 1/16
List
Type
K
Price
92.00
98.00
104.00
110.00
116.00
122.00
128.00
134.00
140.00
148.00
156.00
162.00
164.00
168.00
196.00
200.00
206.00
224.00
226.00
234.00
256.00
290.00
320.00
340.00
380.00
512.00
546.00
620.00
970.00
1,240.00
1,880.00
E-1
E-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
B-1
B-1
B-1
B-1
B-2
B-2
B-2
B-2
B-2
B-3
B-3
B-3
B-3
B-3
A-3
A-3
C-3
C-3
C-3
C-3
B-3
0
0
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 1/16
1 1/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 1/4
1 1/4
7/8
7/8
7/8
7/8
1/8
L
Part No.
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
5/5V440SD
5/5V465SD
5/5V490SD
5/5V520SD
5/5V550SD
5/5V590SK
5/5V630SK
5/5V670SF
5/5V710SF
5/5V750SF
5/5V800E
5/5V850E
5/5V900E
5/5V925E
5/5V975E
5/5V1030E
5/5V1090E
5/5V1130E
5/5V1180E
5/5V1250E
5/5V1320E
5/5V1400E
5/5V1500E
5/5V1600E
5/5V1870F
5/5V2120F
5/5V2360F
5/5V2800F
5/5V3150J
5/5V3750J
5/5V5000J
5 Groove F = 3 3/4
List
Type
K
Price
104.00
110.00
116.00
122.00
128.00
134.00
140.00
146.00
156.00
174.00
184.00
190.00
198.00
202.00
218.00
220.00
222.00
242.00
244.00
282.00
300.00
344.00
384.00
404.00
432.00
536.00
586.00
660.00
1,080.00
1,380.00
1,920.00
E-1
E-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
B-3
B-3
B-3
B-3
C-3
C-3
C-3
0
0
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 3/8
1 3/8
1 3/8
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 1/4
1 1/4
1 1/4
1 1/4
9/16
9/16
9/16
L
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
37
QD Bushing Sheaves
Bushed, Six and Seven Groove
5V QD Sheaves
Example: 6/5V440SD
For 5V OR 5VX BELTS
Stock Bushings Located on pgs 48 - 49 - 50
Diameters
O.D.
P.D.
Part No.
4.40
4.65
4.90
5.20
5.50
5.90
6.30
6.70
7.10
7.50
8.00
8.50
9.00
9.25
9.75
10.30
10.90
11.30
11.80
12.50
13.20
14.00
15.00
16.00
18.70
21.20
23.60
28.00
31.50
37.50
50.00
4.30
4.55
4.80
5.10
5.40
5.80
6.20
6.60
7.00
7.40
7.90
8.40
8.90
9.15
9.65
10.20
10.80
11.20
11.70
12.40
13.10
13.90
14.90
15.90
18.60
21.10
23.50
27.90
31.40
37.40
45.50
6/5V440SD
6/5V465SD
6/5V490SD
6/5V520SD
6/5V550SD
6/5V590SK
6/5V630SK
6/5V670SF
6/5V710SF
6/5V750SF
6/5V800E
6/5V850E
6/5V900E
6/5V925E
6/5V975E
6/5V1030E
6/5V1090E
6/5V1130E
6/5V1180E
6/5V1250F
6/5V1320F
6/5V1400F
6/5V1500F
6/5V1600F
6/5V1870F
6/5V2120F
6/5V2360J
6/5V2800J
6/5V3150J
6/5V3750J
6/5V5000M
6 Groove F = 4 7/16
List
Type
K
Price
114.00
E-1
0
120.00
E-1
0
126.00
A-1
1 5/16
132.00
A-1
1 5/16
138.00
A-1
1 5/16
144.00
A-1
1 5/16
150.00
A-1
1 5/16
154.00
A-1
1 5/8
160.00
A-1
1 5/8
176.00
A-1
1 5/8
186.00
A-1
2
198.00
A-1
2
220.00
A-1
2
224.00
A-1
2
228.00
A-2
2
248.00
A-2
2
260.00
A-2
2
262.00
A-2
2
264.00
A-2
2
320.00
B-3
15/16
342.00
B-3
15/16
384.00
B-3
15/16
424.00
B-3
15/16
464.00
B-3
15/16
520.00
A-3
1 5/16
590.00
A-3
15/16
660.00
B-3
1 1/4
740.00
B-3
1 1/4
1,180.00
B-3
1 1/4
1,440.00
B-3
1 1/4
2,220.00 C-3
3/4
L
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 15/16
1 15/16
2 1/16
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
Part No.
7/5V710SF
7/5V750SF
7/5V800E
7/5V850E
7/5V900E
7/5V925F
7/5V975F
7/5V1030F
7/5V1090F
7/5V1130F
7/5V1180F
7/5V1250F
7/5V1320F
7/5V1400F
7/5V1500F
7/5V1600F
7/5V1870J
7 Groove F = 5 1/8
List
Type
K
Price
186.00
206.00
226.00
248.00
268.00
300.00
320.00
340.00
348.00
356.00
374.00
388.00
440.00
480.00
560.00
640.00
700.00
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
2 1/8
2 1/8
2 1/2
2 1/2
2 1/2
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
1 9/16
L
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
38
QD Bushing Sheaves
Bushed, Eight and Ten Groove
Example: 10/5V800E
For 5V OR 5VX BELTS
Diameters
O.D.
P.D.
7.10
7.50
8.00
8.50
9.00
9.25
9.75
10.30
10.90
11.30
11.80
12.50
13.20
14.00
15.00
16.00
18.70
21.20
23.60
28.00
31.50
37.50
50.00
7.00
7.40
7.90
8.40
8.90
9.15
9.65
10.20
10.80
11.20
11.70
12.40
13.10
13.90
14.90
15.90
18.60
21.10
23.50
27.90
31.40
37.40
49.90
Part
No.
8/5V710DF
8/5V750SF
8/5V800E
8/5V850E
8/5V900E
8/5V925F
8/5V975F
8/5V1030F
8/5V1090F
8/5V1130F
8/5V1180F
8/5V1250F
8/5V1320F
8/5V1400F
8/5V1500F
8/5V1600F
8/5V1870J
8/5V2120J
8/5V2360J
8/5V2800J
8/5V3150M
8/5V3750M
8/5V5000M
8 Groove F = 5 13/16
List
Type
K
Price
186.00
A-1
2 1/8
206.00
A-1
2 1/8
226.00
A-1
2 1/2
248.00
A-1
2 1/2
268.00
A-1
2 1/2
300.00
A-1
2 9/16
320.00
A-1
2 9/16
340.00
A-1
2 9/16
348.00
A-2
2 9/16
356.00
A-2
2 9/16
374.00
A-2
2 9/16
388.00
A-2
2 9/16
440.00
A-3
2 9/16
480.00
A-3
2 9/16
560.00
A-3
2 9/16
640.00
A-3
2 9/16
700.00
A-3
1 9/16
760.00
A-3
1 9/16
840.00
A-3
1 9/16
1,020.00 A-3
1 9/16
1,440.00 B-3
5/8
1,780.00 B-3
5/8
2,440.00 B-3
5/8
L
2 1/16
2 1/16
2 3/4
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
Part
No.
10/5V800E
10/5V850E
10/5V900F
10/5V925F
10/5V975F
10/5V1030F
10/5V1090F
10/5V1130F
10/5V1180F
10/5V1250J
10/5V1320J
10/5V1400J
10/5V1500J
10/5V1600J
10/5V1870J
10/5V2120J
10/5V2360M
10/5V2800M
10/5V3150M
10/5V3750M
10/5V5000M
10/5V1500J*
10 Groove F = 7 3/16
List
Type
K
Price
252.00
272.00
300.00
304.00
360.00
372.00
384.00
440.00
480.00
500.00
580.00
640.00
720.00
780.00
860.00
960.00
1,040.00
1,280.00
1,560.00
1,840.00
2,580.00
1,440.00
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
B-3
B-3
B-3
B-3
B-3
A-2
3 1/4
3 1/4
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 5/16
3 9/16
3 9/16
3 9/16
3 9/16
3 9/16
1 9/16
1 9/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
3 9/16
L
2 3/4
2 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
4 5/8
* = Ductile Iron Sheave
39
QD Bushing Sheaves
Bushed, Four, Five, Six and Seven Groove
8V QD Sheaves
Example: 4/8V1250F
For 8V OR 8VX BELTS
Diameters
O.D.
P.D.
12.50
13.20
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.20
22.40
24.80
30.00
35.50
40.00
12.30
13.00
13.80
14.80
15.80
16.80
17.80
18.80
19.80
21.00
22.20
24.60
29.80
35.30
39.80
Diameters
12.50
12.30
13.20
13.00
14.00
13.80
15.00
14.80
16.00
15.80
17.00
16.80
18.00
17.80
19.00
18.80
20.00
19.80
21.20
21.00
22.40
22.20
24.80
24.60
30.00
29.80
35.50
35.30
40.00
39.80
Part
Number
4/8V1250F
4/8V1320F
4/8V1400F
4/8V1500F
4/8V1600F
4/8V1700F
4/8V1800F
4/8V1900F
4/8V2000J
4/8V2120J
4/8V2240J
4/8V2480M
4/8V3000M
4/8V3550M
4/8V4000M
4 Groove F = 4 7/8
List
Type
K
Price
544.00
A-1
1 3/16
552.00
A-2
1 3/16
560.00
A-2
1 3/16
596.00
A-2
1 3/16
660.00
A-2
1 3/16
720.00
A-3
1 3/16
760.00
A-3
1 3/16
790.00
A-3
1 3/16
820.00
A-3
1 7/16
840.00
A-3
1 7/16
1 7/16
886.00
A-3
1,190.00
F-3
5/16
1,350.00
F-3
5/16
1,790.00
F-3
5/16
1,970.00
F-3
5/16
6/8V1250F
6/8V1320F
6/8V1400F
6/8V1500J
6/8V1600J
6/8V1700J
6/8V1800J
6/8V1900J
6/8V2000M
6/8V2120M
6/8V2240M
6/8V2480M
6/8V3000M
6/8V3550N
6/8V4000N
6/8V5300N
*6/8V5300NDI
6 Groove F = 7 1/8
618.00
A-1
2 5/16
660.00
A-1
2 5/16
722.00
A-1
2 5/16
774.00
A-1
2 9/16
824.00
A-1
2 9/16
928.00
A-2
2 9/16
1,000.00
A-2
2 9/16
1,040.00
A-2
2 9/16
1,190.00
B-2
15/16
1,320.00
B-2
15/16
1,560.00
B-3
15/16
1,590.00
B-3
1 15/16
1,610.00
B-3
1 15/16
2,190.00
C-3
1 1/8
2,440.00
C-3
1 1/8
3,720.00
7,440.00
L
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
8 1/8
8 1/8
Part
Number
5/8V1250F
5/8V1320F
5/8V1400F
5/8V1500F
5/8V1600F
5/8V1700J
5/8V1800J
5/8V1900J
5/8V2000J
5/8V2120J
5/8V2240M
5/8V2480M
5/8V3000M
5/8V3550M
5/8V4000M
5 Groove F = 6
List
Type
Price
588.00
A-1
618.00
A-2
660.00
A-2
700.00
A-2
740.00
A-2
846.00
A-3
900.00
A-3
960.00
A-3
990.00
A-3
1,150.00
A-3
1,310.00
B-3
1,390.00
B-3
1,570.00
B-3
1,990.00
B-3
2,240.00
B-3
7/8V1250J
7/8V1320J
7/8V1400J
7/8V1500J
7/8V1600J
7/8V1700M
7/8V1800M
7/8V1900M
7/8V2000M
K
L
2 5/16
2 5/16
2 5/16
2 5/16
2 5/16
2
2
2
2
2
13/16
13/16
13/16
13/16
13/16
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
7 Groove F = 8 1/4
780.00
A-1
3 9/16
824.00
A-2
3 9/16
866.00
A-2
3 9/16
928.00
A-1
3 15/16
1,010.00
A-2
3 15/16
1,124.00
A-2
3 15/16
1,200.00
A-2
3 15/16
1,240.00
A-2
3 15/16
1,280.00
A-2
3 15/16
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
* = Ductile Iron
40
QD Bushing Sheaves
Bushed, Eight and Ten Groove
Example: 10/8V1250J
For 8V OR 8VX BELTS
Diameters
O.D.
P.D.
12.50
13.20
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.20
22.40
24.80
30.00
35.50
40.00
44.50
53.00
12.30
13.00
13.80
14.80
15.80
16.80
17.80
18.80
19.80
21.00
22.20
24.60
29.80
35.30
39.80
44.30
52.80
8 Groove F = 9 3/8
Part
List
Type
K
Number
Price
8/8V1250J
780.00 A-1 3 9/16
8/8V1320J
824.00 A-2 3 9/16
8/8V1400J
866.00 A-2 3 9/16
8/8V1500J
928.00 A-1 3 15/16
8/8V1600J
1,010.00 A-2 3 15/16
8/8V1700M
1,124.00 A-2 3 15/16
8/8V1800M
1,200.00 A-2 3 15/16
8/8V1900M
1,240.00 A-2 3 15/16
8/8V2000M
1,280.00 A-2 3 15/16
8/8V2120M
1,380.00 A-2 3 15/16
8/8V2240M
1,590.00 A-2
2 1/4
8/8V2480N
1,790.00 A-3
2 1/4
8/8V3000N
1,840.00 A-3
2 1/4
8/8V3550N
2,390.00 A-3
2 1/4
8/8V4000N
2,640.00 A-3
2 1/4
8/8V4450P
3,790.00 B-3
2 5/8
8/8V5300P
3,960.00 B-3
2 5/8
*8/8V1250J (DI) 1,560.00
*8/8V3000N (DI) 3,680.00
L
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
8 1/8
8 1/8
8 1/8
8 1/8
8 1/8
9 3/8
9 3/8
10 Groove F = 11 5/8
Part
List
Type
K
Number
Price
10/8V1250J
948.00
A-1 3 9/16
10/8V1320J
1,114.00 A-2 3 9/16
10/8V1400J
1,278.00 A-2 3 9/16
10/8V1500M
1,442.00 A-1 3 15/16
10/8V1600M
1,608.00 A-2 3 15/16
10/8V1700M
1,648.00 A-2 3 15/16
10/8V1800M
1,720.00 A-2 3 15/16
10/8V1900M
1,760.00 A-2 3 15/16
10/8V2000M
1,860.00 A-2 3 15/16
10/8V2120M
2,040.00 A-2 3 15/16
10/8V2240N
2,246.00 A-2
2 1/4
10/8V2480N
2,290.00 A-3
2 1/4
10/8V3000N
2,350.00 A-3
2 1/4
10/8V3550P
CALL
A-3
2 5/8
10/8V4000P
CALL
A-3
2 5/8
10/8V4450P
CALL
A-3
2 5/8
10/8V5300P
5,000.00 A-3
2 5/8
*10/8V5300P (DI) 10,000.00 A-3
2 5/8
* Ductile Iron Sheave
9 Groove & Severe Duty Dectile Iron Sheaves
(Max Rim Speed = 8,000FPM) are available upon request.
41
L
4 5/8
4 5/8
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
8 1/8
8 1/8
8 1/8
9 3/8
9 3/8
9 3/8
9 3/8
9 3/8
QD Bushing Sheaves
Bushed, Twelve Groove
Example: 12/8V1250M
For 8V BELTS
Diameters
O.D.
P.D.
12.50
13.20
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.20
22.40
24.80
30.00
35.50
35.50
40.00
40.00
44.50
44.50
53.00
63.00
12.30
13.00
13.80
14.80
15.80
16.80
17.80
18.80
19.80
21.00
22.20
24.60
29.80
35.30
35.30
39.80
39.80
44.30
44.30
52.80
62.80
Part
Number
12/8V1250M
12/8V1320M
12/8V1400M
12/8V1500M
12/8V1600M
12/8V1700M
12/8V1800M
12/8V1900N
12/8V2000N
12/8V2120N
12/8V2240N
12/8V2480N
12/8V3000P
12/8V3550P
12/8V3550W
12/8V4000P
12/8V4000W
12/8V4450P
12/8V4450W
12/8V5300W
12/8V6300W
12 Groove F = 13 7/8
List
Type
K
Price
2,080.00
A-1
3 15/16
2,120.00
A-1
3 15/16
2,160.00
A-1
3 15/16
2,200.00
A-1
3 15/16
2,240.00
A-1
3 15/16
2,280.00
A-1
3 15/16
2,320.00
A-2
3 15/16
2,400.00
A-2
2 1/16
2,480.00
A-2
2 1/16
2,560.00
A-2
2 1/16
2,640.00
A-2
2 1/16
3,000.00
A-2
2 1/16
3,380.00
A-3
2 3/8
3,660.00
A-3
2 3/8
CALL
A-3
2 3/8
3,960.00
A-3
2 3/8
CALL
A-3
2 3/8
4,880.00
A-3
2 3/8
CALL
A-3
2 3/8
8,000.00
A-3
2 5/8
CALL
A-3
2 7/8
L
5 3/16
5 3/16
5 3/16
5 3/16
5 3/16
5 3/16
5 3/16
6 1/4
6 1/4
6 1/4
6 1/4
6 1/4
7 1/4
7 1/4
9
7 1/4
9
7 1/4
9
9
9
Severe Duty Ductile Iron Sheaves
(Max Rim Speed = 8,000FPM) are available upon request.
42
TB Bushing Sheaves
A-B TB Sheaves
Example: 1B34-1210
Stock Bushings located on pages 51 - 52
Diameters
O.D.
3.75
3.95
4.15
4.35
4.55
4.75
4.95
5.15
5.35
5.55
5.75
5.95
6.15
6.35
6.55
6.75
6.95
7.15
7.75
8.95
9.75
11.35
12.75
15.75
18.75
20.35
25.35
30.35
P.D.
A
B
3.00
3.40
3.20
3.60
3.40
3.80
3.60
4.00
3.80
4.20
4.00
4.40
4.20
4.60
4.40
4.80
4.60
5.00
4.80
5.20
5.00
5.40
5.20
5.60
5.40
5.80
5.60
6.00
5.80
6.20
6.00
6.40
6.20
6.60
6.40
6.80
7.00
7.40
8.20
8.60
9.00
9.40
10.60
11.00
12.00
12.40
15.00
15.40
18.00
18.40
19.60
20.00
24.60
25.00
29.60
30.00
1 Groove ~1B34-1210 THRU 1B154-2517=1
F=
~1B184-2517=1 1/8
Part No.
1B34-1210
1B36-1210
1B38-1610
1B40-1610
1B42-1610
1B44-1610
1B46-1610
1B48-1610
1B50-1610
1B52-1610
1B54-1610
1B56-1610
1B58-1610
1B60-1610
1B62-1610
1B64-1610
1B66-1610
1B68-1610
1B74-2517
1B86-2517
1B94-2517
1B110-2517
1B124-2517
1B154-2517
1B184-2517
List
Price
27.00
28.00
29.00
30.00
31.00
32.00
33.00
33.00
34.00
35.00
36.00
38.00
39.00
40.00
43.00
45.00
48.00
50.00
56.00
62.00
66.00
81.00
44.00
118.00
158.00
2 Groove F = 1 3/4
Type
K
L
Part No.
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
E-1
E-2
E-2
E-2
F-3
F-3
F-3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1/4
1/4
3/16
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
2B34-1210
2B36-1210
2B38-1610
2B40-1610
2B42-1610
2B44-1610
2B46-1610
2B48-1610
2B50-1610
2B52-1610
2B54-1610
2B56-1610
2B58-1610
2B60-1610
2B62-1610
2B64-1610
2B66-1610
2B68-1610
2B74-2517
2B86-2517
2B94-2517
2B110-2517
2B124-2517
2B154-2517
2B184-2517
2B200-3020
2B250-3020
2B300-3020
List
Price
39.00
41.00
43.00
44.00
46.00
48.00
50.00
52.00
54.00
56.00
58.00
60.00
62.00
64.00
66.00
68.00
69.00
70.00
73.00
78.00
81.00
94.00
102.00
168.00
224.00
269.00
396.00
462.00
Type
K
L
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-1
A-2
A-2
A-2
A-3
A-3
A-3
F-3
F-3
F-3
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
0
0
0
0
0
0
0
0
0
0
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
43
TB Bushing Sheaves
A-B TB Sheaves
Example: 3B34-1210
Diameters
P.D.
O.D.
A
B
3.75
3.00
3.40
3.95
3.20
3.60
4.15
3.40
3.80
4.35
3.60
4.00
4.55
3.80
4.20
4.75
4.00
4.40
4.95
4.20
4.60
5.15
4.40
4.80
5.35
4.60
5.00
5.55
4.80
5.20
5.75
5.00
5.40
5.95
5.20
5.60
6.15
5.40
5.80
6.35
5.60
6.00
6.55
5.80
6.20
6.75
6.00
6.40
6.95
6.20
6.60
7.15
6.40
6.80
7.75
7.00
7.40
8.95
8.20
8.60
9.75
9.00
9.40
11.35 10.60 11.00
12.75 12.00 12.40
15.75 15.00 15.40
18.75 18.00 18.40
20.35 19.60 20.00
25.35 24.60 25.00
30.35 29.60 30.00
38.35 37.60 38.00
Part No.
3B34-1210
3B36-1210
3B38-1610
3B40-1610
3B42-1610
3B44-1610
3B46-1610
3B48-1610
3B50-1610
3B52-1610
3B54-2517
3B56-2517
3B58-2517
3B60-2517
3B62-2517
3B64-2517
3B66-2517
3B68-2517
3B74-2517
3B86-2517
3B94-2517
3B110-2517
3B124-2517
3B154-2517
3B184-2517
3B200-3020
3B250-3020
3B300-3020
3B380-3020
3 Groove F =2 1/2
List
Type
K
Price
45.00
A-1
1 1/2
47.00
A-1
1 1/2
49.00
A-1
1 1/2
51.00
A-1
1 1/2
53.00
A-1
1 1/2
56.00
A-1
1 1/2
57.00
A-1
1 1/2
58.00
A-1
1 1/2
60.00
A-1
1 1/2
64.00
A-1
1 1/2
66.00
A-1
1 1/2
70.00
A-1
1 1/2
71.00
A-1
3/4
73.00
A-1
3/4
74.00
A-1
3/4
78.00
A-1
3/4
80.00
A-1
3/4
82.00
A-1
3/4
86.00
A-1
3/4
99.00
A-2
3/4
106.00
A-2
3/4
126.00
A-2
3/4
145.00
A-3
0
200.00
A-3
0
244.00
A-3
0
334.00
A-3
0
440.00
A-3
0
524.00
A-3
0
880.00
E-3
0
L
Part No.
1
1
1
1
1
1
1
1
1
1
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
2
2
2
2
4B34-1210
4B36-1210
4B38-1610
4B40-1610
4B42-1610
4B44-1610
4B46-1610
4B48-1610
4B50-2517
4B52-2517
4B54-2517
4B56-2517
4B58-2517
4B60-2517
4B62-2517
4B64-2517
4B66-2517
4B68-2517
4B74-2517
4B86-2517
4B94-2517
4B110-2517
4B124-2517
4B154-2517
4B184-2517
4B200-3030
4B250-3030
4B300-3030
4B380-3030
4 Groove F = 3 1/4
List
Type
K
Price
65.00
A-1
2 1/4
67.00
A-1
2 1/4
69.00
A-1
2 1/4
71.00
A-1
2 1/4
73.00
A-1
2 1/4
75.00
A-1
2 1/4
77.00
A-1
2 1/4
79.00
A-1
2 1/4
81.00
A-1
1 1/2
83.00
A-1
1 1/2
88.00
A-1
1 1/2
89.00
A-1
1 1/2
92.00
A-1
1 1/2
94.00
A-1
1 1/2
95.00
A-1
1 1/2
99.00
A-1
1 1/2
103.00
A-1
1 1/2
107.00
A-1
1 1/2
115.00
A-1
1 1/2
129.00
A-2
1 1/2
142.00
A-2
1 1/2
157.00
A-2
1 1/2
176.00
A-3
3/8
229.00
A-3
3/8
265.00
A-3
1/2
376.00
A-3
1/2
481.00
A-3
0
577.00
A-3
0
982.00
A-3
0
L
1
1
1
1
1
1
1
1
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
2
3
3
3
44
DST Bushing Sheaves
Example: 1B34PI
A-B DST Sheaves
Stock Bushings Located on pgs 53 - 54
Diameters
P.D.
O.D.
A
B
3.75
3.00
3.40
3.95
3.20
3.60
4.15
3.40
3.80
4.35
3.60
4.00
4.55
3.80
4.20
4.75
4.00
4.40
4.95
4.20
4.60
5.15
4.40
4.80
5.35
4.60
5.00
5.55
4.80
5.20
5.75
5.00
5.40
5.95
5.20
5.60
6.15
5.40
5.80
6.35
5.60
6.00
6.55
5.80
6.20
6.75
6.00
6.40
6.95
6.20
6.60
7.15
6.40
6.80
7.35
6.60
7.00
7.75
7.00
7.40
8.35
7.60
8.00
8.95
8.20
8.60
9.35
8.60
9.00
9.75
9.00
9.40
11.35 10.60 11.00
12.75 12.00 12.40
13.95 13.20 13.60
15.75 15.00 15.40
16.35 15.60 16.00
18.75 18.00 18.40
20.35 19.60 20.00
25.35 24.60 25.00
30.35 29.60 30.00
Part
Number
1B34P1
1B36P1
1B38P1
1B40P1
1B42P1
1B44P1
1B46P1
1B48P1
1B50P1
1B52P1
1B54P1
1B56P1
1B58P1
1B60P1
1B62P1
1B64P1
1B66P1
1B68P1
1B70P1
1B74P1
1B80P1
1B86P1
1B90P1
1B94P1
1B110P1
1B124Q1
1B136Q1
1B154Q1
1B160Q1
1B184Q1
1B200Q1
1B250Q1
1 Groove F = 1
List
Type
K
Price
50.00
E-1
0
52.00
E-1
0
54.00
E-1
0
55.00
F-1 1/16
57.00
F-1 1/16
60.00
F-1 1/16
64.00
F-1
1/8
65.00
F-1
1/8
67.00
F-1
1/8
69.00
F-1
1/8
70.00
F-1
1/8
72.00
F-1
1/8
73.00
F-1
1/8
77.00
F-2
1/8
80.00
F-2
1/8
83.00
F-2
1/8
90.00
F-2
1/4
93.00
F-2
1/4
96.00
F-3
1/4
103.00 F-3
1/4
106.00 F-3
1/4
112.00 F-3
1/4
114.00 F-3
1/4
116.00 F-3
1/4
136.00 F-3
1/4
138.00 F-3
1/4
148.00 F-3
1/4
198.00 F-3
1/4
231.00 F-3
1/4
263.00 F-3
1/4
383.00 F-3
1/4
490.00 F-3
1/4
L
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
Part
Number
2B34P1
2B36P1
2B38P1
2B40P1
2B42P1
2B44P1
2B46P1
2B48P1
2B50P1
2B52P1
2B54P1
2B56P1
2B58P1
2B60P1
2B62P1
2B64P1
2B66P1
2B68P1
2B70Q1
2B74Q1
2B80Q1
2B86Q1
2B90Q1
2B94Q1
2B110Q1
2B124Q1
2B136Q1
2B154Q1
2B160Q1
2B184Q1
2B200Q1
2B250Q1
2B300Q1
2 Groove F = 1 3/4
List
Type
K
Price
69.00
E-1
0
72.00
E-1
3/16
75.00
E-1
3/16
79.00
E-1
11/16
82.00
E-1
11/16
85.00
A-1
11/16
93.00
A-1
11/16
96.00
A-1
11/16
100.00 A-1
11/16
103.00 A-1
11/16
106.00 A-1
11/16
109.00 A-1
11/16
113.00 A-1
11/16
116.00 A-1
11/16
119.00 A-2
11/16
122.00 A-2
11/16
124.00 A-2
11/16
126.00 A-2
11/16
127.00 A-2
7/16
128.00 A-2
7/16
130.00 A-2
7/16
133.00 A-2
7/16
135.00 A-3
7/16
136.00 A-3
7/16
158.00 A-3
7/16
171.00 A-3
7/16
204.00 A-3
7/16
281.00 A-3
7/16
298.00 A-3
7/16
372.00 A-3
7/16
442.00 A-3
3/8
662.00 A-3
3/8
733.00 A-3
3/8
L
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
45
DST Bushing Sheaves
A-B DST Sheaves
Example: 3B34P2
Diameters
P.D.
O.D.
A
B
3.75 3.00 3.40
3.95 3.20 3.60
4.15 3.40 3.80
4.35 3.60 4.00
4.55 3.80 4.20
4.75 4.00 4.40
4.95 4.20 4.60
5.15 4.40 4.80
5.35 4.60 5.00
5.55 4.80 5.20
5.75 5.00 5.40
5.95 5.20 5.60
6.15 5.40 5.80
6.35 5.60 6.00
6.55 5.80 6.20
6.75 6.00 6.40
6.95 6.20 6.60
7.15 6.40 6.80
7.35 6.60 7.00
7.75 7.00 7.40
8.35 7.60 8.00
8.95 8.20 8.60
9.35 8.60 9.00
9.75 9.00 9.40
11.35 10.60 11.00
12.75 12.00 12.40
13.95 13.20 13.60
15.75 15.00 15.40
16.35 15.60 16.00
18.75 18.00 18.40
20.35 19.60 20.00
25.35 24.60 25.00
30.35 29.60 30.00
38.35 37.60 38.00
3 Groove F =2 1/2
Part No.
3B34P2
3B36P2
3B38P1
3B40P1
3B42P1
3B44P1
3B46P1
3B48P1
3B50P1
3B52P1
3B54P1
3B56P1
3B58P1
3B60P1
3B62P1
3B64P1
3B66P1
3B68P1
3B70Q1
3B74Q1
3B80Q1
3B86Q1
3B90Q1
3B94Q1
3B110Q1
3B124Q1
3B136Q1
3B154Q1
3B160Q1
3B184Q1
3B200Q1
3B250Q1
3B300Q1
3B380Q1
List
Price
76.00
80.00
85.00
88.00
92.00
95.00
109.00
112.00
115.00
119.00
122.00
125.00
128.00
132.00
135.00
141.00
145.00
148.00
150.00
152.00
154.00
165.00
171.00
178.00
210.00
242.00
262.00
333.00
353.00
404.00
545.00
733.00
830.00
1,514.00
4 Groove F = 3 1/4
Type
K
L
Part No.
E-1
E-1
E-1
E-1
E-1
A-1
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
0
3/16
3/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
5/8
5/8
5/8
5/8
2 15/16
2 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
4B34P2
4B36P2
4B38P1
4B40P1
4B42P1
4B44P1
4B46P1
4B48P1
4B50P1
4B52P1
4B54P1
4B56P1
4B58P1
4B60P1
4B62P1
4B64P1
4B66P1
4B68P1
4B70Q1
4B74Q1
4B80Q1
4B86Q1
4B90Q1
4B94Q1
4B110Q1
4B124Q1
4B136Q1
4B154Q1
4B160Q1
4B184Q1
4B200Q1
4B250Q1
4B300Q1
4B380Q1
List
Price
120.00
124.00
129.00
132.00
136.00
139.00
142.00
145.00
149.00
152.00
155.00
158.00
162.00
165.00
168.00
175.00
181.00
187.00
193.00
194.00
198.00
211.00
232.00
234.00
256.00
285.00
340.00
384.00
417.00
443.00
611.00
867.00
997.00
1,677.00
Type
K
L
E-1
E-1
E-1
E-1
E-1
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-2
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
A-3
5/16
5/16
5/16
0
0
0
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1 5/16
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2 15/16
2 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
46
Flat Belt Pulleys
Part Number Example: 5X8FBPP2
5" O.D x 8" Face Width
Uses a P2 bushing
Dimensions
Part
Number
Bushing
O.D
F
L
K
G
List Price
5X8FBPP2
P2
5.00
8.00
2.31
2.47
3.22
99.00
6X8FBPQ2
Q2
6.00
8.00
2.75
2.31
2.94
108.00
7X8FBPQ2
Q2
7.00
8.00
2.75
2.31
2.94
112.00
8X8FBPQ2
Q2
8.00
8.00
2.75
2.31
2.94
115.00
Note: All Flat Belt Pulleys are crowned and are grooved for self-cleaning.
47
QD BUSHINGS
Ordering Example: JA1.1/16
NOTE: All bushings include a set screw over the keyway except for JA
Bore Range - Inch
Bushing
Key Seat Inch
* Shallow Keyseat - Keystock supplied with bushing
2 1/8, 2 3/16, 2 1/4
1/2 x 1/4
† Oversize Key
2 1/4†, 2 5/16, 2 3/8, 2 7/16, 2 1/2
5/8 x 5/16
Note: A rectangular key is supplied with bushings that have
2 9/16, 2 5/8, 2 11/16, 2 3/4
5/8 x 5/16
shallow keyseats. This key will fit the standard depth keyseat
2 13/16, 2 7/8, 2 15/16, 3 ,3 1/8, 3 3/16, 3 1/4
3/4 x 1/8*
on the shaft and the shallow keyseat on the bushing.
3 5/16, 3 3/8, 3 7/16, 3 1/2
7/8 x 1/16*
SDS
1 3/8† , 1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16
SD
1 3/4
1 13/16
1 7/8, 1 15/16
2
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 1 1/4
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 1/4†, 1 5/16, 1 3/8
1 3/8†, 1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16
1 3/4
1 13/16
1 7/8, 1 15/16
2
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
1/4 x 1/16*
No Key
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 1/16*
No Key
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
3/8 x 1/8*
1/2 x 1/8*
1/2 x 1/16*
No Key
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
3/8 x 1/8*
1/2 x 1/8*
1/2 x 1/16*
No key
Bushing
Bore Range - Inch
SK
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 1/4†, 1 5/16, 1 3/8
1 5/16†, 1 3/8†, 1 7/16, 1 1/2, 1 9/16, 1 5/8
1 11/16, 1 3/4
1, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 3/8†, 1 7/16, 1 1/2, 1 9/16, 1 5/8
1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16
SH
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1
1 1/16, 1 1/8, 1 3/16
1 1/4
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 1/4† , 1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8
1 11/16
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 1/4† , 1 5/16, 1 3/8
Key Seat Inch
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
3/8 x 3/16
1/2 x 1/4
1/2 x 1/8*
5/8 x 1/16*
No Key
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
3/8 x 3/16
1/2 x 1/4
1/2 x 1/4
5/8 x 5/16
5/8 x 3/16*
5/8 x 1/16*
3/4 x 1/16*
No Key
3/16 x 3/32
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
3/8 x 3/16
1/2 x 1/4
JA
1 3/4†, 1 13/16, 1 7/8, 1 15/16, 2, 2 1/16, 2 1/8
SF
E
48
2 3/16, 2 1/4
2 1/4†, 2 5/16, 2 3/8, 2 7/16, 2 1/2
2 9/16, 2 5/8
1/2, 9/16
5/8, 3/4, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 3/8†, 1 7/16, 1 1/2, 1 9/16, 1 5/8
1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2 , 2 1/16
2 1/8, 2 3/16, 2 1/4
2 1/4†
2 5/16, 2 3/8, 2 7/16, 2 1/2
2 9/16, 2 5/8, 2 11/16, 2 3/4
2 13/16, 2 7/8
2 15/16
7/8, 15/16
Ordering Example: F1 or F1-1/8 or N5-7/8
BUSHING BORE RANGE- INCH
F
J
M
N
P
W
1, 1 1/8, 1 3/16, 1 1/4
1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16
2 1/8, 2 3/16, 2 1/4
2 1/4†, 2 5/16, 2 3/8, 2 7/16, 2 1/2, 2 5/8
2 5/8, 2 11/16, 2 3/4
2 13/16, 2 7/8, 2 15/16, 3
3 1/8, 3 3/16, 3 1/4
3 5/16, 3 3/8, 3 7/16, 3 1/2
3 5/8, 3 11/16, 3 3/4
3 7/8, 3 15/16
4
1 7/16, 1 1/2, 1 11/16, 1 3/4
1 7/8, 1 15/16, 2, 2 1/16
2 1/8, 2 3/16, 2 1/4
2 5/16, 2 3/8, 2 7/16, 2 1/2, 2 5/8
2 11/16, 2 3/4
2 7/8, 2 15/16, 3
3 1/8, 3 3/16, 3 1/4
3 5/16, 3 3/8, 3 7/16, 3 1/2
3 5/8, 3 11/16, 3 3/4
3 13/16, 3 7/87, 3 15/16
4, 4 1/8, 4 3/16, 4 1/4, 4 3/8, 4 7/16, 4 1/2
1 15/16, 2
2 3/16, 2 1/4
2 3/8, 2 7/16, 2 1/2, 2 5/8
2 11/16, 2 3/4
2 7/8, 2 15/16, 3
3 1/8, 3 3/16, 3 1/4
3 3/8, 3 7/16, 3 1/2
3 5/8, 3 11/16, 3 3/4
3 13/16, 3 7/8, 3 15/16
4, 4 1/8, 4 3/16, 4 1/4, 4 3/8, 4 7/16, 4 1/2
4 5/8, 4 11/16, 4 3/4
4 7/8, 4 15/16
5, 5 3/16, 5 1/4, 5 3/8, 5 7/16, 5 1/2
2 15/16, 3
3 3/8, 3 7/16, 3 1/2
3 5/8, 3 3/4
3 7/8, 3 15/16
4, 4 3/16, 4 1/4, 4 3/8, 4 7/16, 4 1/2
4 5/8, 4 3/4, 4 7/8, 4 15/16, 5
5 3/16, 5 7/16, 5 1/2
5 7/8
6
3 3/4
4 7/16, 4 1/2
4 7/8, 4 15/16, 5, 5 7/16, 5 1/2
6, 6 7/16
6 3/4, 7
6, 6 1/2
7, 7 1/4, 7 1/2
7 3/4, 8, 8 1/2
QD BUSHINGS
Ordering Example: JA15MM or E35MM
KEY SEAT INCH
BUSHING BORE RANGE- mm
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
1/2 x 1/4
1/2 x 1/4
5/8 x 5/16
5/8 x 5/16
3/4 x 3/8
3/4 x 3/8
7/8 x 3/16 *
7/8 x 3/16 *
1 x 1/8 *
No Key
3/8 x 3/16
1/2 x 1/4
1/2 x 1/4
5/8 x 5/16
5/8 x 5/16
3/4 x 3/8
3/4 x 3/8
7/8 x 7/16
7/8 x 7/16
1 x 3/8 *
1 x 1/8 *
1/2 x 1/4
1/2 x 1/4
5/8 x 5/16
5/8 x 5/16
3/4 x 3/8
3/4 x 3/8
7/8 x 7/16
7/8 x 7/16
1 x 1/2
1 x 1/2
1 1/4 x 5/8
1 1/4 x 1/4 *
1 1/4 x 1/4 *
3/4 x 3/8
7/8 x 7/16
7/8 x 7/16
1 x 1/2
1 x 1/2
1 1/14 x 5/8
1 1/14 x 1/4 *
1 1/4 x 1/4*
1 1/2 x 1/8*
7/8 x 7/16
1 x 1/2
1 1/4 x 5/8
1 1/2 x 1/4
1 3/4 x 1/8
1 1/2 x 3/4
1 3/4 x 3/4
2 x 1/4
JA
SH
SDS
SD
SK
SF
E
F
J
M
N
† Oversize Key
Note: A rectangular key is supplied with bushings that have shallow keyseats.
This key will fit the standard depth keyseat on the shaft and the shallow keyseat on the bushing.
49
15, 16
19, 20, 22
24, 25, 28
15
20, 22
24, 25
28, 30
32, 35, 38
24, 25, 28, 30
32, 35, 38
40, 42
24, 25, 28, 30
32, 35, 38
40, 42
14
20
24, 25, 28, 30
32, 35, 38
40, 42
45, 48, 50
55
60
28, 30
32, 35, 38
40, 42
45, 48, 50
55
60, 65
35, 38
40, 42
45, 48, 50
55
60, 65
70, 75
80
42
45, 48, 50
55
60, 65
70, 75
80, 85
90
50
55
60, 65
70, 75
80, 85
90, 95
100
80
90
100
120
90
100
120
KEY SEAT INCH
5 x 2.3
6 x 2.8
8 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
8 x 3.3
10 x 3.3
8 x 3.3
10 x 3.3
12 x 3.3
8 x 3.3
10 x 3.3
12 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
12 x 3.3
14 x 3.8
16 x 4.3
18 x 4.4
8 x 3.3
10 x 3.3
12 x 3.3
14 x 3.8
16 x 4.3
18 x 4.4
10 x 3.3
12 x 3.3
14 x 3.3
16 x 4.3
18 x 4.4
20 x 4.9
22 x 4.4
12 x 3.3
14 x 3.8
16 x 4.3
18 x 4.4
20 x 4.9
22 x 5.4
25 x 5.4
14 x 3.3
16 x 4.3
18 x 4.8
20 x 4.9
22 x 5.4
25 x 5.4
28 x 6.4
22 x 5.4
25 x 5.4
28 x 6.4
32 x 7.4
25 x 5.4
28 x 6.4
32 x 7.4
QD Bushing/Sheaves Installation
QD bushings sizes JA through N can be assembled in either of two positions shown below.
Sizes P through S should be assembled in position one. Position One is the conventional or
standard mounting. Position Two (Reverse Mounting) may be necessary in some cases,
such as mounting small sheaves with blind holes (not drilled through).
*For Normal Applications. For Severe (Rock-crusher type) applications these values can be increased by a maximum of 50%.
Caution: Excessive cap-screw torque can cause sheave and/or bushing breakage. The use of lubricants can cause
severe breakage. Therefore, DO NOT USE LUBRICANTS IN THIS INSTALLATION!!!!
INSTALLATION:
1. Make sure the tapered-cone surface of the bushing and the mating bore of the sheave are free of all foreign
substances, such as dirt, excess paint accumulations, metal chips, lubricants, etc.
2. For position one or two (whichever applies), line up the unthreaded holes © with the threaded holes (t) and
insert cap screws with lock washers engaging only two or three threads. (*a)
3. With key in shaft keyway, slide the loosely-assembled unit onto shaft and position for good belt alignment. (*b,
*c) Use no lubricants or anti-seize compound on threads or tapered surfaces.
4. Carefully tighten the cap screws alternately and progressively until the tapers are seated (at approximately half
the recommended torque).
5. Check alignment and sheave runout (wobble) and correct as necessary.
6. Continue careful alternate and progressive tightening of the cap screws to the recommended torque values
show in the table. Maximum torque should be achieved on each individual bolt only two times in the
consecutive tightening.
Note: When properly mounted, there will be a gap between the bushing flange and sheave after the screws are tightened.
Caution: Use of lubricants and or excessive screw torque can cause breakage.
7. Tighten the set screw, when available, to hold the key securely during operation.
REMOVAL:
1. Loosen and remove all mounting cap screws.
2. Insert cap screws in all threaded jack screw holes (J).
3. Start with the screws furthest from the bushing saw slot and tighten all jack screws alternately and
progressively. Keep turning the screws in small equal amounts until the tapered surfaces disengage.
(*a) When mounting a sheave on M through W size bushings, position the threaded jack-apart hole (J) as far from
the bushing saw as possible to reduce the possibility of bushing breaking.
(*b) When installing large or heavy parts in Position One it may be easier to mount the key and bushing on the
shaft first. Then place the sheave on the bushing and align the holes.
(*c) Caution: When mounting on vertical shaft, provisions must be made, which will positively prevent the sheave
and/or bushing from dropping during installation.
50
TB Bushings (Inch)
Bushing
Bore Range-inch
2012 1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
Key Seat inch
1/8 x 1/16
3/16 x 3/32
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
Bushing
Bore Range-inch
1008 1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1
1108 1/2, 9/16
Key Seat inch
1/8 x 1/16
3/16 x 3/32
1/4 x 1/16*
1/4 x 1/8
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
5/16 x 5/32
3/8 x 3/16
1 13/16, 1 7/8
1 15/16, 2
1/2 x 1/4
1/2 x 3/16*
2517 1/2
5/8, 11/16, 3/4, 13/16, 7/8
1/8 x 1/16
3/16 x 3/32
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1/4 x 1/8
5/16 x 5/32
3/8 x 3/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1
1/8 x 1/16
3/16 x 3/32
1/4 x 1/8
1 1/16, 1 1/8
1/4 x 1/16*
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16, 2 1/8, 2 3/16, 2 1/4
1/2 x 1/4
1/8 x 1/16
2 5/16, 2 3/8, 2 7/16, 2 1/2
5/8 x 3/16*
1210 1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1215 1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1310 1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
3/16 x 3/32
2525 3/4, 7/8
3/16 x 3/32
1/4 x 1/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1/4 x 1/8
1/8 x 1/16
1 5/16, 1 3/8
5/16 x 5/32
3/16 x 3/32
1/4 x 1/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16
3/8 x 3/16
1/2 x 1/4
2 3/16, 2 1/4, 2 5/16, 2 3/8, 2 7/16, 2 1/2
5/8 x 3/16*
1/8 x 1/16
3/16 x 3/32
3020 13/16, 15/16, 1, 1 1/8, 1 3/16, 1 1/4
1/4 x 1/8
1 5/16, 1 3/8
1/4 x 1/8
5/16 x 5/32
5/16 x 5/32
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
3/8 x 3/16
1/8 x 1/16
1 7/8, 1 15/16, 2, 2 1/16, 2 1/8, 2 3/16, 2 1/4
1/2 x 1/4
5/8, 11/16, 3/4, 13/16, 7/8
3/16 x 3/32
2 5/16, 2 3/8, 2 7/16, 2 1/2, 2 5/8, 2 11/16, 2 3/4
5/8 x 5/16
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1/4 x 1/8
5/16 x 5/32
2 7/8, 2 15/16, 3
3/4 x 1/4*
3/16 x 3/32
1 7/16, 1 1/2
3/8 x 3/16
1 5/16, 1 3/8
5/16 x 5/32
1610 1/2, 9/16
1 9/16, 1 5/8
3030 13/16, 15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
3/8 x 1/8*
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
3/8 x 3/16
1/8 x 1/16
1 7/8, 1 15/16, 2, 2 1/16
1/2 x 1/4
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
3/16 x 3/32
1/4 x 1/8
2 1/8, 2 3/16, 2 1/4
2 5/16, 2 3/8, 2 7/16, 2 1/2
1/2 x 1/4
5/8 x 5/16
1 5/16, 1 3/8
5/16 x 5/32
2 5/8, 2 11/16, 2 3/4
5/8 x 5/16
1 7/16, 1 1/2
3/8 x 3/16
2 7/8, 2 15/16, 3
3/4 x 1/4*
1 9/16, 1 5/8
3/8 x 1/8*
1615 1/2, 9/16
* Shallow keyseat - Keystock supplied with bushing
NOTE: A rectangular key is supplied with bushings that have
shallow keyseats. This key will fit the standard depth keyseat on
the shaft and the shallow keyseat on the bushings.
51
TB Bushings (Inch) cont.
Key Seat inch
1 3/16, 1 1/4
1/4 x 1/8
1 3/8
5/16 x 5/32
1 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4
3/8 x 3/16
1 7/8, 1 15/16, 2, 2 1/8, 2 3/16, 2 1/4
1/2 x 1/4
2 5/16, 2 3/8, 2 7/16, 2 1/2, 2 5/8, 2 11/16, 2 3/4 5/8 x 5/16
2 7/8, 2 15/16, 3, 3 1/8, 3 3/16, 3 1/4
3/4 x 3/8
3 5/16, 3 3/8, 3 7/16, 3 1/2
7/8 x 1/4*
1 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4
3/8 x 3/16
1 7/8, 1 15/16, 2, 2 1/8, 2 3/16, 2 1/4
1/2 x 1/4
2 3/8, 2 7/16, 2 1/2, 2 5/8, 2 11/16, 2 3/4
5/8 x 5/16
2 7/8, 2 15/16, 3, 3 1/8, 3 3/16, 3 1/4
3/4 x 3/8
3 3/8, 3 7/16, 3 1/2, 3 11/16, 3 3/4
7/8 x 7/16
3 7/8, 3 15/16, 4
1 x 1/4*
1 15/16, 2, 2 3/16
1/2 x 1/4
2 3/8, 2 7/16, 2 5/8, 2 3/4
5/8 x 5/16
2 7/8, 2 15/16, 3, 3 1/8, 3 3/16, 3 1/4
3/4 x 3/8
3 3/8, 3 7/16, 3 1/2, 3 5/8, 3 3/4
7/8 x 7/16
3 7/8, 3 15/16, 4, 4 1/8, 4 3/16, 4 1/4
1 x 1/2
4 3/8, 4 7/16, 4 1/2
1 x 1/4*
4 15/16
1 1/4 x 7/16*
2 7/16
5/8 x 5/16
2 15/16
3/4 x 3/8
3 3/8, 3 7/16, 3 5/8
7/8 x 7/16
3 7/8, 3 15/16, 4, 4 1/4, 4 3/8, 4 7/16, 4 1/2
1 x 1/2
4 7/8, 4 15/16, 5
1 1/4 x 7/16*
Bushing
3535
4040
4545
5050
Bore Range-inch
* Shallow keyseat - Keystock supplied with bushing
NOTE: A rectangular key is supplied with bushings that have
shallow keyseats. This key will fit the standard depth keyseat on
the shaft and the shallow keyseat on the bushings.
52
TB Bushings (Metric)
List Price
11.60
Bushing
1008
12.00
1108
13.00
1210
14.00
1215
15.00
1310
16.00
1610
16.00
1615
20.00
2012
24.00
2517
Bore Range-mm
14, 16
18, 19, 20, 22
24, 25
14, 16
18, 19, 20, 22
24, 25, 28
28
14, 16
18, 19, 20, 22
24, 25, 28, 30
32
14, 16
18, 19, 20, 22
24, 25, 28, 30
32, 35
14, 16
18, 19, 20, 22
24, 25, 28, 30
32, 35
14, 16
18, 19, 20, 22
24, 25, 28, 30
32, 35, 38
40, 42
14, 16
18, 19, 20, 22
24, 25, 28, 30
32, 35, 38
40, 42
18, 19, 20, 22
24, 25, 28, 30
32, 35, 38
40, 42
45, 48, 50
20, 22
24, 25, 28, 30
32, 35, 38
40, 42
45, 48, 50
55
60
Keyway-mm
5 x 2.3
6 x 2.8
8 x 2.3
5 x 2.3
6 x 2.8
8 x 3.3
8 x 2.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
12 x 3.3
5 x 2.3
6 x 2.8
8 x 3.3
10 x 3.3
12 x 3.3
6 x 2.8
8 x 3.3
10 x 3.3
12 x 3.3
14 x 3.8
6 x 2.8
8 x 3.3
10 x 3.3
12 x 3.3
14 x 3.8
16 x 4.3
18 x 4.4
53
List Price
37.00
54.00
Bushing
3020
and
3030
76.00
3535
122.00
4040
152.00
4545
246.00
5050
Bore Range-mm Keyway-mm
25, 28, 30
8 x 3.3
32, 35, 38
10 x 3.3
40, 42
12 x 3.3
45, 48, 50
14 x 3.8
55
16 x 4.3
60, 65
18 x 4.4
70, 75
20 x 4.9
35, 38
10 x 3.3
40, 42
12 x 3.3
45, 48, 50
14 x 3.8
55
16 x 4.3
60, 65
18 x 4.4
70, 75
20 x 4.9
80, 85
22 x 5.4
90
25 x 5.4
40, 42
12 x 3.3
45, 48, 50
14 x 3.8
55
16 x 4.3
60, 65
18 x 4.4
70, 75
20 x 4.9
80, 85
22 x 5.4
90, 95
25 x 5.4
100
28 x 6.4
55
16 x 4.3
60, 65
18 x 4.4
70, 75
20 x 4.9
80, 85
22 x 5.4
90, 95
25 x 5.4
100, 105, 110
28 x 6.4
60, 65
18 x 4.4
70, 75
20 x 4.9
80, 85
22 x 5.4
90, 95
25 x 5.4
100, 105, 110
28 x 6.4
115, 120, 125
32 x 7.4
Ordering Example: 1008-14MM or 4545-105MM
TB BUSHINGS INSTALLATION
INSTALLATION
1. Properly clean shaft, bore, and taper surface of bushing. Remove or degrease any oil, pain, or dirt.
2. Install the bushing into the pulley hub. Be sure to match the hole pattern, not the threaded holes. Match the
half threaded holes with the half straight holes (a complete hole will be threaded on one side only.)
3. Lightly oil the set screws (1008 to 3030) or the cap screws (3525 to 5050), be sure to oil under the cap screw
head. Install the screws into the holes that are threaded on the hub side. (Shown as
in diagram). DO NOT
LUBRICATE THE BUSHING TAPER OR BORE> BREAKAGE OF PRODUCT MAY OCCUR.
4. Fit the pulley with the bushing onto the shaft and locate in the proper location. Install key into the keyway of
the shaft and bushing.
5. Tighten screws alternatively and gradually in accordance with the torques listed on the Recommended Wrench
Torque chart.
6. Using a hammer with a block or sleeve (do not hit bushing directly with hammer) tap on large end of the
bushing and re-tighten screws per the appropriate Wrench Torque Values.
7. Fill the screw heads with grease to eliminate dirt build up.
REMOVAL
1. Remove all screws and lightly oil the point and threads. Oil under cap screws if used.
2. Install screws into the holes that are threaded only on the bushing side.
3. Tighten screws uniformly and alternately until the bushing is loose from the hub and pulley is free from the
shaft. Tap on small end of bushing to assist removal if it does not loosen. NOTE: One screw is not used for
removal.
Recommended Wrench Torque
Bushing No.
Lb-ln
Nm
Set Screw
Hex Size
1008, 1108
1210, 1215
1310
1610, 1615
2012
2517, 2525
3020, 3030
3535
4040
4545
5050
53
176
176
176
273
422
790
986
1670
2380
3080
6
20
20
20
31
48
90
112
190
270
350
1/8"
3/16"
3/16"
3/16"
7/32"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
2
54
DST Bushings
DOUBLE SPLIT TAPER BUSHINGS
* Standard H bushings are made out of powdered metal and include a set screw over the keyway
**STL H bushings are optional and are made out of steel. These do not have a set screw.
Bushing
Bore Range-inch
G 3/8, 7/16
Wt.
Key Seat inch
0.40
None
1/2, 9/16
0.40 1/8 X 1/16
5/8, 11/16, 3/4, 13/16, 7/8
0.40 3/16 x 3/32
15/16, 1
H 3/8**, 7/16**
Bushing
Bore Range - Inch
Q2 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
Wt.
Key Seat inch
5.80
1/4 x 1/8
5.80 5/16 x 5/32
5.80
3/8 x 3/16
0.40 1/7 x 1/16*
1 13/16, 1 7/8, 1 15/16, 2
5.80
1/2 x 1/4
0.90
2 1/16, 2 1/8, 2 3/16, 2 1/4
5.80
1/2 x 1/4
2 5/16, 2 3/8, 2 7/816, 2 1/2, 2 9/16
5.80
5/8 x 5/16
None
1/2**, 9/16**
0.90 1/8 x 1/16
5/8, 11/16, 3/4, 13/16, 7/8
0.90 3/16 x 3/32 R1 1 5/16, 1 3/8
9.95 5/16 x 5/32
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
0.90
9.95
1 5/16, 1 3/8
0.90 5/16 x 1/16*
1 1/8, 1 3/16, 1 1/4
9.95
1/4 x 1/8
1 3/8†, 1 7/16**, 1 1/2**
0.90 3/8 x 1/16*
1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
9.95
3/8 x 3/16
P1 1/2, 9/16
1/4 x 1/8
1 7/16
3/8 x 3/16
1.70 1/8 X 1/16
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16, 2 1/8
5/8, 21/32, 11/16, 3/4, 25/32, 13/16, 7/8
1.70 3/16 x 3/32
2 3/16, 2 1/4
9.95
1/2 x 1/4
15/16, 31/32, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1.70
2 5/16, 2 3/8, 2 7/16, 2 1/2
9.95
5/8 x 5/16
1 5/16, 1 3/8
1.70 5/16 x 5/32
2 9/16, 2 5/8, 2 11/16, 2 3/4
9.95
5/8 x 5/16
1 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4
1.70 3/8 x 3/16
2 13/16, 2 7/8, 2 15/16, 3, 3 1/8, 3 3/16, 3 1/4
9.95
3/4 x 3/8
9.95
7/8 x 7/16
P2 3/4, 13/16, 7/8
1/4 x 1/8
2.18 3/16 x 3/32
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
2.18
1 5/16, 1 3/8
2.18 5/16 x 5/32
1 7/16*, 1 1/2, 1 9/16, 1 5/8, 1 11/16
2.18 3/8 x 3/16
Q1 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1/4 x 1/8
3 3/8, 3 7/16, 3 1/2, 3 5/8, 3 3/4
R2 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2 1/16, 2 1/8, 2 3/16, 2 1/4
14.38 5/16 x 5/32
14.38
3/8 x 3/16
14.38
1/2 x 1/4
4.60 3/16 x 3/32
2 5/16, 2 3/8, 2 7/16, 2 1/2
14.38
5/8 x 5/16
4.60
2 9/16, 2 5/8, 2 11/16, 2 3/4
14.38
5/8 x 5/16
1/4 x 1/8
1 5/16, 1 3/8
4.60 5/16 x 5/32
2 13/16, 2 7/8, 2 15/16, 3, 3 1/8, 3 3/16, 3 1/4
14.38
3/4 x 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 13/16, 1 7/8, 1 15/16, 2, 2 1/16, 2 1/8, 2 3/16, 2 1/4
4.60 3/8 x 3/16
4.60 1/2 x 1/4
3/8, 3 7/16, 3 1/2, 3 5/8, 3 3/4
14.38
7/8 x 7/16
2 5/16,2 3/8, 2 7/16, 2 1/2, 2 9/16, 2 5/8, 2 11/16
4.60 5/8 x 5/16
** These H Bushings are only available in steel
† Oversize Key
Note: A rectangular key is supplied with bushings that have shallow keyseats.
This key will fit the standard depth keyseat on the shaft and the shallow
keyseat on the bushing.
55
DST Bushings
56
MPB Bushings
Part No.
JAMPB
SHMPB
SDSMPB
SDMPB
SKMPB
SFMPB
EMPB
FMPB
JMPB
MMPB
NMPB
QD
Bore Size
1/2
1/2
1/2
1/2
1/2
1/2
7/8
1
1 1/2
2
2 7/16
Minimum Plain Bore Bushings
List Price
11.00
16.00
19.00
22.00
28.00
36.00
70.00
124.00
Part No.
GMPB
HMPB
P1MPB
P2MPB
Q1MPB
Q2MPB
R1MPB
R2MPB
DST
Bore Size
3/8
3/8
1/2
3/4
3/4
1
1 1/8
1 3/8
308.00
540.00
List Price
8.00
9.00
15.00
16.00
28.00
31.00
70.00
78.00
Part No.
1008MPB
1108MPB
1210MPB
1215MPB
1310MPB
1610MPB
1615MPB
2012MPB
2517MPB
2525MPB
3020MPB
3030MPB
3535MPB
4040MPB
4545MPB
5050MPB
TB
Bore Size
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7/8
15/16
15/16
1 3/16
1 7/16
1 15/16
2 7/16
Note: MPB bushing are unsplit and have no keyway for ease of machining. Bushing must be saw cut prior to use.
57
List Price
11.60
12.00
13.00
14.00
15.00
16.00
16.00
20.00
24.00
37.00
37.00
54.00
76.00
122.00
152.00
246.00
Weld-On Hubs
S Style Weld-On Hub Dimensions
HUBS Bushing A
B
D
K
S16-4
S16-6
S20-6
S20-8
S25-6
S25-8
S25-10
S25-16
S30-10
S30-16
S35
Thread
Dia
List
Price
3/8-16
3/8-16
7/16-14
7/16-14
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
1/2-13
75.00
75.00
82.00
82.00
152.00
152.00
152.00
152.00
208.00
208.00
470.00
QD Weld-On Hub Dimensions Thread
HUBS
D
L
BC Type Dia.
List
Price
1610
1610
2012
2012
2517
2517
2517
2517
3020
3020
3535
JA-A
SH-A
SDS-A
SK-A
SF-A
E-A
F-A
J-A
3.000
3.000
1.000
1.000
0.275
0.450
3.563
3.593
1.250
1.250
0.450
0.570
4.250
4.250
1.750
1.750
0.450
0.565
4.250
4.250
1.750
1.750
0.685
1.090
5.250
2.000
0.675
5.250
2.000
1.090
6.500
3.500
1.160
2.875
2.875
3.438
3.438
4.125
4.125
4.125
4.125
5.125
5.125
6.375
2.250 0.563
1.656
1
10-24
31.00
3.000 0.813
2.250
1
1/4-20
56.00
3.500 0.750
2.688
1
1/4-20
74.00
3.375 1.250
3.313
1
5/16-18
99.00
5.000 1.250
3.875
1
3/8-16
154.00
6.250 1.625
5.000
1
1/2-13
216.00
7.000 2.500
5.625
1
9/16-12
336.00
7.750 3.188
6.250
1
5/8-11
432.00
QD Weld-On Hub Dimensions Thread
HUBS
D
L
BC Type Dia.
M-A
N-A
9.50
5.188
9.250
2.000
3/4-10
1140.00
10.50
6.250
10.250
2.000
7/8-9
1680.00
QD Weld-On Hub Dimensions
HUBS O.D A
C
X
HG1
HH1
HCH1
HP1
HCP1
HP2
HQ1
HCQ1
HQ2
HR1
HR2
List
Price
Thread
Dia.
List
Price
2.00 0.174
1.875 0.625 1/4-20
16.00
2.50 0.174
2.375 0.875 1/4-20
20.00
2.50 0.625
2.375 0.875 1/4-20
20.00
3.00 0.292
2.875 1.313 5/16-18
32.00
3.00 1.000
2.875 1.313 5/16-18
32.00
3.00 1.100
2.875 2.313 5/16-18
56.00
4.50 0.709
4.375 1.750 3/8-16
64.00
4.50 1.250
4.375 1.750 3/8-16
64.00
4.50 1.606
4.375 2.750 3/8-16
96.00
5.75 0.709
5.625 2.000 3/8-16
112.00
5.75 1.606
5.625 4.000 3/8-16
240.00
58
W Style Weld-On Hub Dimensions
HUBS Bushing A
B
D
K
Thread
Dia
List
Price
2.875
3.250
1.500
1.500
0.625 2.500
0.625 2.875
4.875
5.500
1.750
3.000
0.750 4.375
0.750 5.125
6.750
7.750
3.500
4.000
1.000 6.250
1.000 7.250
8.750
9.500
4.500
5.000
1.000 8.000
1.000 8.750
3/8-16
3/8-16
1/2-13
5/8-11
1/2-13
5/8-11
3/4-10
7/8-9
90.00
97.00
142.00
268.00
420.00
600.00
744.00
970.00
W12
W16
W25
WA30
WA35
WA40
WA45
WA50
1215
1615
2517
3030
3535
4040
4545
5050
BCS Couplings
Part No.
BCS-SF
BCS-SK
BCS-SD
BCS-H
BCS-P1
BSC-Q1
Bushing
Size Bore Range
SF 1/2-2 15/16
SK
1/2-2 5/8
1/2-2
SD
H
3/8-1 1/2
P1
1/2 -1 3/4
Q1 3/4-2 11/16
Dimensions
H
G
X
E
T*
O.D
L
4-5/8
6-7/16
4-5/8
7/8
3-3/4
1/2
1100
3-7/8
5-5/16
3-7/8
3/4
3-3/4
11/32
700
3-1/8
5-5/32
3-1/8
11/16
3-3/4
1/4
5000
2-1/2
3
2-1/2
1/2
2
1/4
1700
3
4-11/32
3
11/16
3
3/8
5660
4-3/8
5-1/2
4-1/2
3/4
4
7/16
14600
List
Price
181.00
141.00
112.00
60.00
115.00
151.00
T*= Maximum Recommended Torque in inch pounds for Normal Service. These ratings
Should be reduced by 50% for Heavy Duty Service.
Note: Two Bushings will need to be ordered per coupling.
59
JAYDEE JAW COUPLINGS
Hub
L035
L050
L070
L075
L090
L095
L099
L100
L110
L150
L190
L225
Bore- Inch
1/8, 3/16, 1/4, 5/16, 3/8
1/4, 5/16, 3/8, 7/16
1/2, 9/16
5/8
1/4, 5/16, 3/8, 7/16, 1/2
9/16
5/8, 11/16, 3/4
1/4, 5/16, 3/8, 7/16
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
1/4, 5/16, 3/8, 7/16
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/8
7/16
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8
7/16, 1/2
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16
7/16
1/2, 9/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16
5/8, 11/16, 3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16, 1 7/8, 1 1/2, 1 9/16, 1 5/8, 1 3/4
1/2
3/4, 5/8, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 7/8
1/2
3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 7/8, 1 15/16, 2, 2 1/16, 2 1/8
3/4, 13/16, 7/8
15/16, 1, 1 1/16, 1 1/8, 1 1/4, 1 3/16
1 5/16, 1 3/8
1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4
1 7/8, 1 15/16, 2, 2 1/16, 2 1/8, 2 3/16, 2 1/4
2 3/8, 2 7/16, 2 5/8
60
Set Screw Size
Key Way -Inch
6-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
NONE
NONE
1/8 X 1/16
3/16 X 3/32
NONE
1/8 X 1/16
3/16 X 3/32
NONE
1/8 X 1/16
3/16 X 3/32
NONE
1/8 X 1/16
3/16 X 3/32
1/4 X 1/8
NONE
1/8 X 1/16
3/16 X 3/32
1/4 X 1/8
NONE
1/8 X 1/16
3/16 X 3/32
1/4 X 1/8
NONE
1/8 X 1/16
3/16 X 3/32
1/4 X 1/8
5/16 X 5/32
3/8 X 3/16
3/16 X 3/32
1/4 X 1/8
5/16 X 5/32
1/2 x 1/4
1/8 x 1/16
3/16 X 3/32
1/4 X 1/8
5/16 X 5/32
3/8 X 3/16
1/2 X 1/4
1/8 x 1/16
3/16 X 3/32
1/4 X 1/8
5/16 X 5/32
3/8 X 3/16
1/2 X 1/4
3/16 X 3/32
1/4 X 1/8
5/16 X 5/32
3/8 X 3/16
1/2 X 1/4
5/8 X 5/16
Jaw Couplings
Jaw Coupling - Dimensions (inches)
Coupling
L035
L050
L070
L075
L090
L095
L099
L100
L110
L150
L190
L225
Type
1
1
1
1
1
1
1
1
1
1
2
2
Hub Dia
Overall
Length
A
0.625
1.063
1.375
1.750
2.125
2.125
2.531
2.531
3.313
3.750
4.500
5.000
B
0.813
1.721
2.000
2.126
2.146
2.520
2.835
3.459
4.252
4.500
5.250
6.142
Distance
Length
Between
Thru Bore
Flanges
C
0.281
0.470
0.500
0.480
0.490
0.455
0.650
0.660
0.843
0.940
0.875
0.942
D
0.266
0.625
0.770
0.820
0.841
1.020
1.071
1.368
1.706
1.771
2.112
2.500
E
1.340
1.733
HD
4
4.25
Set Screw Thread
Size
Set
Screw
Qty.
List Price
1
1
1
1
1
2
2
2
2
2
2
2
4.70
4.60
7.30
8.80
13.50
20.60
26.10
38.70
53.10
67.90
124.30
145.40
#6-32UNC X 1/8"
1/4"-20UNC X 3/16"
1/4"-20UNC X 1/4"
1/4-20UNC X 3/8"
1/4-20UNC X 3/8"
5/16"-18UNC X 3/8"
5/16"-18UNC X 3/8"
5/16"-18UNC X 3/8"
3/8"-16UNC X 5/16"
3/8"-16UNC X 1/2"
1/2"-13UNC X 1/2"
1/2"-13UNC X 1/2"
Spiders - Buna-N (rubber), Hytrel, Urethane, Bronze
Buna-N (Black)
L035N
L050N
L070N
L075N
L090N
L095N
L099N
L100N
L110N
L150N
L190N
L225N
List
Price
2.30
3.20
4.60
7.80
10.00
10.00
21.10
21.10
24.30
42.20
60.60
81.90
Catalog Number & List Price
Hytrel (White)
List Price
L050H
L070H
L075H
L090H
L095H
L099H
L100H
L110H
L150H
L190H
L225H
10.80
15.20
22.80
30.30
30.30
72.20
72.20
87.30
104.90
123.60
145.20
Urethane (Orange)
L050U
L070U
L075U
L090U
L095U
L099U
L100U
L110U
L150U
L190U
L225U
61
List Price
Bronze
8.20
9.00
11.10
15.60
15.60
41.90
41.90
79.40
96.10
L050B
L070B
L075B
L090B
L095B
L099B
L100B
L110B
L150B
L190B
L225B
103.70
131.20
List Price
18.10
22.00
35.20
38.80
38.80
57.30
57.30
68.80
221.20
336.30
431.90
FRACTIONAL HORSPOWER (FHP) BELTS – STANDARD AND KEVLAR ( 2L – 3L – 4L – 5L )
CONVENTIONAL ( A – B – C – D – E )
CONVENTIONAL KEVLAR CORD ( A – B – C )
NARROW WEDGE ( 3V – 5 V – 8V )
KEVLAR CORD NARROW WEDGE ( 8V )
CONVENTIONAL RAW EDGE COGGED ( AX – BX – CX )
NARROW WEDGE RAW EDGE COGGED ( 3VX – 5 VX – 8 VX )
DOUBLE SIDED ( AA – BB- CC )
BANDED CONVENTIONAL ( RA – RAX – RB – RBX – RC – RCX – RD )
KEVLAR BANDED CONVENTIONAL ( RBK – RCK )
BANDED NARROW WEDGE ( 3V – 5 V – 8 V )
BANDED COGGED NARROW WEDGE ( 3VX – 5 VX )
BANDED METRIC NARROW WEDGE ( RSPA – RSPB – RSPC )
BANDED NARROW WEDGE KEVLAR ( R3VK – R5VK – R8VK )
METRIC NARROW WEDGE ( SPZ – SPA – SPB – SPC )
METRIC COGGED NARROW WEDGE ( XPZ – XPA – XPB – XPC )
VARIABLE SPEED
POLYVEE ( J – L – M )
TIMING ( MXL – L – H – XH – XXH )
DUAL SIDED TIMING ( DXL – DL – DH – DXH )
HTD/RPP METRIC TIMING ( 3M – 5M – 8M – 14M – 20M )
DUAL SIDED HTD/RPP METRIC TIMING ( D3M – D5M – D8M – D14M – S 20M )
STS/STD SUPER TORQUE METRIC TIMING ( S2M – S3M – S4.5M – S5M – S8M – S14M )
DUAL SIDED STS/STD SUPER TORQUE METRIC TIMING ( DS3M – DS5M – DS8M – DS14M )
POLYURETHANE METRIC TIMING ( T2.5 – T5 – T10 )
POLYURETHANE METRIC TIMING ( AT5 – AT10 )
DUAL SIDED POLYURETHANE METRIC TIMING ( DT5 – DT10 )
POLYMAX ( 3M – 5M – 7M – 11M )
BANDED POLYMAX ( 5M – 7M – 11M )
EUROPEAN METRIC VARIABLE SPEED
ROULANDS METRIC VARIABLE SPEED
SNOWMOBILE BELTS
VINTAGE SNOWMOBILE BELTS
SAW BELTS
ATV/UTV BELTS
GO CART BELTS
MILLING MACHINE BELTS
IF A BROKEN BELT CAN NOT BE REPLACED IN A SHORT PERIOD OF TIME IT COULD CAUSE UNNECESSARY AND COSTLY DOWNTIME!
TO AVOID INVALUABLE LOSS OF PRODUCTION TIME, CALL JAYDEE ENTERPRISES INC. FOR ALL OF YOUR BELT REQUIREMENTS.
ARE YOU IN THE CLEVELAND AREA? WE HAVE COUNTER SERVICE – BRING YOUR BELT IN AND WE’LL DO OUR BEST TO MATCH IT AND GET YOU A
COST EFFECTIVE REPLACEMENT!
IF WE DON’T HAVE THE BELT YOU NEED IN STOCK IT CAN BE ADDED TO OUR COMPREHENSIVE INVENTORY! CALL TODAY AND ASK FOR PRICES
AND LITERATURE. MOST CATALOGS ARE AVAILABLE ON LINE, HARDBACK OR ON CD!
3465 LOST NATION RD UNIT #15, WILLOUGHBY, OH 44094
PHONE (440) 946-9367 ~ (800) 989-0162 ~ FAX (440) 946-6148
E-MAIL: [email protected] OR VISIT OUR WEBSITE: WWW.JDV-BELTS.COM

cast iron sheaves

Transcription

Similar documents