MB Series Grossing Stations

Transcription

MB SERIES
Mopec The Better Product People
Table Of Contents
MB100............................... 3
MB Workstations – Standard Or Custom
MB150............................... 5
MB200............................... 7
MB400............................... 9
MB450............................. 11
MB600............................. 13
MB650............................. 15
MB670............................. 17
MB700............................. 19
Standard Equipment............. 21
Optional Accessories............ 25
Manufacturing.................... 32
Certification....................... 33
Green Production................ 34
Better Customer Service
Customer input straight from the lab continuously improves our product
from design and engineering to manufacturing and sales. With more than
40 representatives across the country, a customer service center and a
team of dedicated engineers, we work to determine the most innovative
and cost-effective solutions for your facility.
From Initial Design To Delivery, We Welcome The
Challenge Of Completing A Custom Job
Rather than select your product directly from a catalog, our representatives
work around your space requirements, lab activity and budget to determine
the best solutions for your specific work environment.
Mopec’s engineers can accommodate virtually any unique plumbing request
from specialty fixtures to running water on your cutting board.
MB400 Freestanding Unit
MB450 Freestanding Shared Sink Model
From something as simple as positioning the paper towel dispenser in a
more convenient location, to incorporating custom specialty fixtures or reconfiguring the unit to meet your exact needs - chances are we’ve done it before.
MB150 Countertop Dry Unit
MB600 Elevating Unit
MB650 Elevating Unit
With Extra Knee Space
MB100
With Optional
Leg Frame
1
MB200
Countertop Unit
MB670 Elevating Shared Sink Model
MB700 Elevating Wall Mount Unit
2
Standard Features Include:
• Small specimen sink, 10” (25.4 cm) L
x 5” (12.7 cm) W x 3” (7.6 cm) H located
in center of work shelf
• Includes hot/cold water fixture, wrist
blade handles with swing spout faucet
and built-in vacuum breaker
• Recessed stainless steel work surface
• Removable polyethylene cutting board
23” (58.4 cm) L x 16” (40.6 cm) W x
3/4” (2 cm) H - color white
• Washable rule with inch & centimeter
markings
• Rule is located on the inside lip of the
workstation
• Magnetic tool bar holds instruments
when not in use
• Organizer Bin-small (Qty 1) stainless steel
• Organizer Bin-large (Qty 1) stainless
steel
• Four leveling pads
• Stainless steel C-Fold paper towel
dispenser
MB100
WITH OPTIONAL LEG FRAME
The Mopec MB100 Grossing Workstation is ideal for small laboratories with
tight space constraints. It also serves as a secondary station in larger, busier
facilities that require additional workspace to meet increased demands.
Keep The Workflow Moving
• Built for counter top placement, the MB100 is compact, maximizing your
work space with conveniences such as recessed fluorescent lighting and
a small specimen sink with wrist blade handles, and swing spout faucet.
• Measuring 5” W x 10” L x 3” H, the sink is located on the center of the work
shelf, ideal for washing small specimens and disinfecting instruments.
• When counter space is limited, the MB100 can be converted into a
freestanding workstation with the optional stainless steel leg frame.
• Waterproof fluorescent light with
(2) two fluorescent bulbs
• G.F.C.I. Electrical Receptacle,
1 circuit - 20 amps
• 8 foot hospital grade line cord
• Duct stub connection: 46” (116.9 cm) L
x 3” (7.6 cm) W
• Backdraft ventilation
• All plumbing and electrical work
accomplished at factory
48” (122 cm) L x
29” (74 cm) W x
45.5” (116 cm) H
For photos of Standard Equipment,
see pages 21-24.
Countertop Model
Optional Leg Frame Shown
Shown With Optional Cabinet
Optional Features Include:
CP001 - Communication Port
CP002 - Wire Chase
MB001 - Self-Contained Exhaust System Single
MB003 - Formalin Dispensing Container
MB004 - Dictation Stand
MB006 - Leg Frame
3
MB007 - Foot Pedal (w/Leg Frame)
MB009 - Perimeter Rinse
MB011 - Safety Splash Shield
MB012 - Hand Spray Rinse
MB013 - Magnifier
MB015 - Video Camera Arm
MB016 - Halogen Task Light - Dual
MB017 - Camera Stand
MB022 - Halogen Task Light - Single
MB026 - Ventilated Trash Can
MB028 - Formalin Dispensing System
MB029 - CPU Bracket
MB041 - Combo Ledge/Pencil Drawer (w/leg frame)
MB049 - LCD Flat Screen/Keyboard System
MB050 - Ventilated Trash Can On Casters
MB053 - LED Gooseneck Task Light - Single
MB054 - LED Gooseneck Task Light - Dual
MB057 - Cassette Labeling Shelf (w/Leg Frame)
SA100 - Seismic Anchor (To Wall)
For photos and descriptions of Optional Equipment, see pages 25-30.
4
• Removable polyethylene cutting board
23” (58.4 cm) L x 16” (40.6 cm) W x
3/4” (2 cm) H - color white
markings
workstation
when not in use
• Organizer bin-small (Qty 1) stainless
steel
• Organizer bin-large (Qty 1) stainless
steel
• Four leveling pads
MB150
COUNTERTOP DRY UNIT
More than 40 standard features and optional accessories make the MB150
grossing station ideal for any work environment. Standard features bring
production to life and optional accessories customize your grossing station
to your unique requirements. The versatile MB150 can be wall mounted or
mounted to leg frames. A ventilated trash can, with or without wheels, is
available if the leg frame option is selected. Backdraft ventilation safely and
effectively removes fumes and vapors from the work area. The factory
installed exhaust duct can be connected to any in-house ventilation system.
dispenser
• G.F.C.I. Electrical Receptacle, 1 circuit
- 20 amps
x 3” (7.6 cm) W
• Electrical work accomplished at factory
48” (122 cm) L x
29” (74 cm) W x
45.5” (116 cm) H
see pages 21-24.
CP002 - Wire Chase
MB001 - Self-Contained Exhaust System - Single
MB006 - Leg Frame
MB011 - Safety Splash Shield
MB013 - Magnifier
5
MB022 - Halogen Light - Single
MB029 - CPU Bracket
MB041 - Combination Ledge/Pencil Drawer
(w/leg frame purchase)
MB050 - Ventilated Trash Can With Casters
MB053 - LED Gooseneck Light - Single
MB054 - LED Gooseneck Light - Dual
SA100 - Seismic Anchor (To Wall)
6
• All stainless steel construction
• Large deep sink 19”(48 cm) L x
14” (36 cm) W x 10” (25 cm) D
• Includes hot/cold water fixture
• Wrist blade handles with swing spout
faucet and built-in vacuum breaker
• Removable polyethylene cutting board,
23”(58.4 cm) L x 16” (40.6 cm) W
x 3/4” (2 cm) H - color white
• One 14” adjustable shelf with brackets
• Organizer bin-small (Qty 1) stainless
steel
MB200
WITH OPTIONAL LEG FRAME
The MB200 is a compact counter top workstation featuring one of the deepest
sinks in the industry. The deep sink allows for convenient handling of large
specimens and/or containers, while receiving proper ventilation and resting
easily upon a counter top. Mopec’s Backdraft Ventilation System safely pulls
specimen odors and off-gas away from the end user - ensuring a safe
laboratory work environment.
• Organizer bin-large (Qty 1) stainless
steel
markings
workstation
when not in use
dispenser
• G.F.C.I. Electrical receptacle
• Electrical requirements 115V-60Hz 1ph -1 circuit - 20 amps
x 3” (7.6 cm) W
48” (121.9 cm) L x
29” (73.7 cm) W x
45.5” (115.6 cm) H
Optional Leg
Frame Shown
see pages 21-24.
BL007 - Lab Mixing Faucet For Standard
Foot Pedal
BL047 - Lab Mixing Faucet - Pneumatic
BL800 - 1 Hp Disposal
CP002 - Wire Chase
MB001 - Self-Contained Exhaust - Single
7
MB006 - Leg Frame
MB007 - Foot Pedal
MB011 - Splash Shield
MB013 - Magnifier
MB019 - Formalin Collection System
(w/Leg Frame)
MB028 - F ormalin Dispensing System
(w/Leg Frame)
MB029 - CPU Bracket
MB031 - Removable Writing Ledge
(w/Leg Frame)
MB047 - Pneumatic Foot Pedal
MB050 - Ventilated Trash Can - Casters
MB051 - Formalin Dispensing System Cubitainer Style (w/Leg Frame)
MB055 - Infrared Faucet
MB057 - Cassette Labeling Shelf
(w/Leg Frame)
MB060 - Hand Crank Leg Frame
SA100 - Seismic Anchor
8
• Large deep sink, 19”(48 cm) L x
14” (36 cm) W x 10” (25 cm) D
• Includes hot & cold water fixture with
wrist blade handles and swing spout
• 23” (58.4 cm) L x 16” (40.6 cm) W x
3/4” (2 cm) H removable polyethylene
cutting board - color white
• (4) Four leveling pads
markings
workstation
when not in use
• Stainless Steel C-Fold paper towel
dispenser
• G.F.C.I. electrical receptacle
MB400
FREESTANDING UNIT
Designed for any size laboratory, the MB400 is a medium sized freestanding
grossing station featuring a sloped work surface, integrally constructed large
sink and Mopec’s Backdraft Ventilation System. The MB400 provides ample
work space and the standard conveniences needed to perform the most
demanding grossing procedures.
OPTIMIZE EFFICIENCY UNDER THE PRESSURE OF HEAVY
WORKLOADS
• An optional hot and cold water foot pedal provides hands-free access to
running water
• The MB400 can also be equipped with a large flammable cabinet. Two
doors, an adjustable shelf, and easy access make it the ideal storage area
for materials and equipment used on a regular basis.
• Electrical requirements: 115V- 60Hz 1 ph - 1 circuit - 20 amps
• Duct stub connection: 58” (147.32 cm)
L x 3” (7.6 cm) W
• Only trade hook required
• 14” Stainless steel shelf
• Organizer bin - (1) small stainless steel
• Organizer bin - (1) large stainless steel
60” (152.4 cm) L x
29” (73.7 cm) W x
79” (200.1 cm) H
Optional flamable
storage cabinet
see pages 21-24.
BL007 - Lab Mixing Faucet
CP002 - Wire Chase
9
MB005 - Self-Contained Exhaust - Dual
MB007 - Foot Pedal
MB008 - Flammable Cabinet
MB013 - Magnifier
MB028 - Formalin Dispensing System Carboy Style
MB029 - CPU Bracket
MB041 - Combination Writing Ledge/
Pencil Drawer
MB042 - Formalin Audio Alarm
MB048 - Shelf w/Brackets (Not Compatible
w/Formalin Dispensing Systems)
MB050 - Ventilated Trash Can On Casters
MB051 - Formalin Dispensing System Cubitainer Style
10
faucet and built-In vacuum breaker
• Two removable polyethylene cutting
boards 23” X 16” X 3/4” H - color white
markings
• Two magnetic tool bars that hold
instruments when not in use
dispenser
• (2) Waterproof fluorescent lights with
• Two G.F.C.I. electrical receptacles
MB450
FREE-STANDING SHARED SINK MODEL
The MB450 double grossing station combines all the amenities of two
workstations but with a smaller footprint than separate units. The MB450
allows two technicians to work side-by-side in an area that could
otherwise go under utilized. This enables your team to easily perform the
most demanding grossing procedures and keep up with an ever increasing
work demand.
The MB450 is constructed entirely of stainless steel and features a structural
center base cabinet, accompanied by a tubular leg frame on either side.
Equipped with leveling feet, this freestanding unit can be placed anywhere
in the lab regardless of finished floor conditions.
• Only trade hook up required
• Two 14” stainless steel shelves
• Organizer bins - (2) small stainless
steel (2) large stainless steel
84” (213.6 cm) L x
30” (76.2 cm) W x
77.5” (196.8 cm) H
see pages 21-24.
BL047 - Lab Mixing Faucet Pneumatic
CP002 - Wire Chase
11
MB007 - Foot Pedal
MB008 - Flammable Cabinet
MB013 - Magnifier
MB026 - Vented Trash Can
MB029 - CPU Bracket
MB041 - Combination Writing Ledge/Pencil
Drawer
MB042 - Audio Formalin Alarm
MB048 - Shelf w/Brackets
MB050 - Vented Trash Can On Casters
12
• All 304 stainless steel construction
• Working area elevating range:
29.5”(74 cm) to 41.5”(105 cm) H
• Overall elevating range: 71.5”(181 cm)
to 83.5”(212 cm) H
• Sink: 19”(48 cm) L x 14”(36 cm) W x
10”(25 cm) D
NOTE: Right hand sink is standard, if
left hand sink is desired, please specify
when ordering
• Elevating Pendant Switch
• Swing spout faucet w/wrist blade
handles and vacuum breaker
MB600
ELEVATING UNIT
The MB600 is one of the most technologically advanced grossing stations
available today. This unit combines paramount laboratory-workspace
ventilation and a back-saving elevation feature. Designed with a work
surface that elevates between 29.5” –41.5” (74.9 cm – 105.4 cm); physicians
and technicians of varying heights can find the most agreeable elevation to
perform their duties without back strain.
• Recessed fluorescent lighting
• White polyethylene dissection board
23”(58 cm) L x 16”(40 cm) W x 3/4” H
• Inch/centimeter ruler
• G.F.C.I. duplex electrical receptacle
w/water tight cover
• 14” Stainless steel adjustable shelf
with brackets
• Magnetic tool bar
• Paper towel holder
• One (1) large and one (1) small stainless steel organizer bin
60” (152 cm) L x
29” (73 cm) D
Elevating Range
71.5” – 83.5” (181 cm –
212 cm)
see pages 21-24.
CP002 - Wire Chase
13
MB007 - Foot Pedal
MB013 - Magnifier
MB029 - CPU Bracket
MB041 - Combination Writing Ledge/Pencil
Drawer
14
• Working area elevating range:
29.5” (73 cm) to 41.5” (104 cm) H
• Overall elevating range: 71.5” (180 cm)
to 83.5” (210 cm) H
• Sink: 19” (48 cm) L x 14” (36 cm) W x
10” (25 cm) D
NOTE: Right hand sink is standard, if
left hand sink is desired, please specify
when ordering
• Swing spout faucet with wrist blade
• White polyethylene dissection board
23” (58 cm) L x 16” (40 cm) W x 3/4” H
MB650
ELEVATING UNIT WITH EXTRA
KNEE SPACE
Mopec’s manufacturing technology, craftsmanship and superior design make
the MB650’s smooth edges and corners a safe and comfortable work
environment. Every surface you touch and every accessory you use is
designed and engineered for safety and comfort. The MB650 echoes
premium features found in the complete line of MB Series grossing stations.
with water tight cover
• 14” (35cm) Stainless steel adjustable
shelf
• One (1) large and one (1) small
stainless steel organizer bin
• Knee space area, side-to-side
dimensions: 34.5” (86 cm)
• Floor to under edge of work surface
varies from a minimum of 26” (66 cm)
to a maximum of 38” (96 cm)
60” (152 cm) L x
29” (73 cm) D
Elevating Range
71.5” – 83.5” (180 cm –
210 cm)
see pages 21-24.
CP002 - Wire Chase
15
MB007 - Foot Pedal
MB013 - Magnifier
MB029 - CPU Bracket
MB057 - Cassette Label Shelf
16
• Overall elevating range: 71.5” (181 cm)
to 83.5”H (212 cm) - Pendant Elevation
Switch
• Two removable polyethylene cutting
boards - color white
• (2) stainless steel shelves
• (2) washable rulers with inch &
centimeter markings
• (2) magnetic tool bars that hold
• (2) stainless steel C-Fold paper towel
dispensers
MB670
ELEVATING SHARED SINK MODEL
Designed to take up less space than two MB600’s, the MB670 is a fantastic
unit for those who are tight on space but carry a significant workload. At 96”
(243.8 cm) in length, this double grossing station is one of the largest and
most technologically advanced grossing stations available today. The MB670
combines paramount laboratory workspace ventilation with a back-saving
elevation feature.
The open workspace of the MB670, and generous elevation feature, enables
your team to work side-by-side; either standing or sitting, allowing two technicians to easily perform the most demanding grossing procedures without
back strain.
• (2) waterproof fluorescent lights with
• (2) G.F.C.I. electrical receptacles
• Electrical requirements: 115V- 60Hz 1 ph - 1 circuit - 20 amps
96” (243.84 cm) L x
29” (73.66 cm) W x
70.5” (179.07 cm) H
Elevating Range
71.5” (181 cm) to
83.5” (212 cm)
see pages 21-24.
CP002 - Wire Chase
17
MB007 - Foot Pedal
MB013 - Magnifier
MB022 - Halogen Task Light Single
MB029 - CPU Bracket
MB041 - C
ombination Writing Ledge/Pencil
Drawer
MB048 - Shelf w/Adjustable Brackets
18
• Sink basin: 19” ( 48 cm) L x 14” (36
cm) W x 10”( 25 cm) D
• Pendant switch
• Work surface elevating range:
29” (73 cm) to 41” (104 cm) H
• G.F.C.I. duplex electrical receptacle w/
water tight cover
• 14” (35 cm) Stainless steel adjustable
shelf
• Dissection board
• One (1) large (1) small stainless steel
organizer bin
MB700
ELEVATING WALL MOUNT UNIT
The MB700 features a fixed, wall mounted mechanism that raises and lowers
the grossing station. The open workspace and unique elevation feature included with the MB700, allows for those to work while standing or sitting and
is also wheelchair accessible.
Mopec’s Backdraft Ventilation System eliminates respiratory strain by directly
ventilating the MB700 work surface. Maintaining a 60” (152.4 cm) work surface width, the MB700 has more than enough space to handle any procedure
while eliminating the often obstructive base feature. Equipped with standard
features such as recessed fluorescent lighting, sloped work surface, extra
large sink, and swing spout faucet with wrist blade handles. The MB700 will
enhance the grossing process for any technician.
Wall Mounted Lifting Device
• Electro mechanical lifting arms
designed to lift 1000 pounds
• Pendant elevation switch
• Working height to move approximately
29.5” (74.9 cm) Lowest position;
41.5” (104.1 cm) Highest position)
• Facility wall must accommodate lifting
mechanism
60” (152 cm) L &
70” - 82.75”
(177 cm - 210 cm) H,
Elevation Range
29.5” (74.9 cm) to 41.5”
(104.1 cm)
see pages 21-24.
MB004 - Dictation Equipment
MB007 - Foot Pedal
19
MB013 - Magnifier
MB029 - CPU Bracket
MB050 - Ventilated trash Can On Casters
20
Standard
Swing Spout Faucet With Wrist Blade Handles
Standard Equipment Include:
MB700
ELEVATING WALL MOUNT UNIT
• Sink basin: 19” ( 48 cm) L x 14” (36 cm)
W x 10”( 25 cm) D
• Work surface elevating range: 29” (73
cm) to 41” (104 cm) H
• Inch/Centimeter ruler
w/water tight cover
• 14” (35 cm) Stainless steel
adjustable shelf
• Dissection Board
• One (1) large (1) small stainless steel
organizer bin
WALL MOUNTED LIFTING DEVICE
• Elected mechanical lifting arms
designed to lift 1000 pounds
• Limit switched installed on high and low
limit.
• Working height to move approximately
12” (30 cm) (30” (30cm) Lowest
position 42” (106 cm) Highest position)
• Facility wall must accommodate lifting
mechanism.
• Backdraft Ventilation. Designed to safely
and efficiently remove formaldehyde
fumes and hazardous chemical vapors.
• Equipped with a factory installed
exhaust duct which can be connected to
any in-house ventilation system
MB670
ELEVATING SHARED SINK
• Backdraft Ventilation
• Overall elevating range: 71.5” to
83.5” H
with two removable polyethylene
cutting boards
21
• (2) stainless steel shelves
• (2) washable rulers with inch &
centimeter markings
• (2) magnetic tool bars that hold
• (2) stainless steel C-Fold paper towel
dispensers
• (2) waterproof fluorescent lights with
• Electrical requirements: 115V- 60 Hz 1 ph - 1 circuit - 20 amps
MB650
ELEVATING UNIT WITH EXTRA KNEE
SPACE
• Working area elevating range: 29-1/2”
(73 cm) to 41-1/2” (104 cm) H
• Overall elevating range: 71-1/2” (180
cm) to 83-1/2” (210 cm) H
• Sink: 19” (48 cm) L x 14” (36 cm) W x
10” (25 cm) D
NOTE: Right hand sink is standard, if left
hand sink is desired, please specify when
ordering.
• Swing spout faucet with wrist blade
• White polyethylene dissection board 23”
(58 cm) L x 16” (40 cm) W x 3/4” H
with water tight cover
• 14” (35 cm) Stainless steel adjustable
shelf
• One (1) large and One (1) small
• Backdraft Ventilation - equipped with
two 8” (20 cm) diameter flexible factory
installed exhaust ducts which can be
connected to any in-house ventilation
system.
• Knee space area - side-to-side
dimensions: 34.5” (86 cm)
• Floor to under edge of work surface
varies from a minimum of 26” (66 cm)
to a maximum of 38” (96 cm)
Equipment
MB600
ELEVATING UNIT
• All 304 Stainless steel construction
•W
orking area elevating range: 29-1/2”
(74 cm) to 41-1/2” (105 cm) H
•O
verall elevating range: 71-1/2”(181
cm) to 83-1/2”(212cm) H
•S
ink: 19”(48 cm) L x 14”(36 cm) W x
10”(25 cm) D
NOTE: Right hand sink is standard, if left
hand sink is desired, please specify when
ordering.
•S
wing spout faucet w/wrist blade
•R
ecessed fluorescent lighting
•W
hite polyethylene dissection board
23”(58 cm) L x 16”(40 cm) W x 3/4” H
•G
.F.C.I. duplex electrical receptacle
w/water tight cover
• 1 4” Stainless steel adjustable shelf with
brackets
•M
agnetic tool bar
•O
ne (1) large and One (1) small
•B
ackdraft Ventilation. Designed to safely
* E quipped with two 8”(20 cm) diameter
flexible factory installed exhaust ducts
which can be connected to any in-house
ventilation system.
MB450
FREE-STANDING SHARED SINK MODEL
•A
ll stainless steel construction
•R
ecessed stainless steel work surface
with two removable polyethylene cutting
boards.
• ( 4) Four leveling pads
•W
ashable rule with inch & centimeter
markings
• ( 2) magnetic tool bars that hold
dispenser
White Dissecting Board
Magnetic Tool Bar
Elevating Pendant Switch
Organizer Bin - Large
Backdraft Ventilation
Adjustable Shelf
22
Standard
Equipment
Standard Equipment Includes:
• Waterproof fluorescent light with (2) two
fluorescent bulbs
• Back draft Ventilation
accomplished at factory.
• Only trade hook-up required.
• Two 14” Stainless Steel Shelves
• Two Organizer Bins - (2) small
stainless steel
• Two Organizer Bins - (2) large
stainless steel
MB400
GROSSING STATION-FREE-STANDING
• Large deep sink, 19”(48 cm) L x 14”
(36 cm) W x 10” (25 cm) D
• 23” (58.4 cm) L x 16” (40.6 cm) W x
3/4” (2 cm) H. Removable polyethylene
cutting board-color white
markings
workstation
when not in use
dispense
fluorescent bulbs
• G.F.C.I. electrical receptacle
x 3” (7.6 cm) W
fumes and hazardous chemical
vapors. Equipped with a factory installed
• Only trade hook-up required
• 14” Stainless steel shelf
23
• Organizer Bin - (1) small stainless steel
• Organizer Bin - (1) large stainless steel
MB200
COUNTERTOP GROSSING WORKSTATION
WITH FULL SINK
• Large deep sink 19”(48 cm) L x 14”
(36 cm) W x 10” (25 cm) D
• Includes hot/cold water fixture
• Wrist blade handles with swing spout
with removable polyethylene cutting
board, 23”(58.4 cm) L x 16” (40.6 cm)
W x 3/4” (2 cm) H
• One 14” adjustable shelf with brackets
• Organizer Bin-small (Qty 1) stainless
steel
• Organizer Bin-large (Qty 1) stainless
steel
markings
workstation
when not in use
dispenser
fluorescent bulbs
• G.F.C.I. Electrical receptacle
• Electrical requirements 115V-60 Hz 1ph -1 circuit - 20 amps
x 3” (7.6 cm) W.
fumes and hazardous chemical
vapors. Equipped with a factory installed
• Only trade hook-up required
MB100
COUNTERTOP GROSSING WORKSTATION
WITH SMALL SPECIMEN SINK
•S
mall specimen sink, 10” (25.4 cm) L x
5” (12.7 cm) W x 3” (7.6 cm) H located
in center of work shelf
• Includes hot/cold water fixture with wrist
blade handles and swing spout faucet
and built-in vacuum breaker
•R
ecessed stainless steel work surface
•R
emovable polyethylene cutting board
23” (58.4 cm) L x 16” (40.6 cm) W x
3/4” (2 cm) H
•W
ashable rule with inch & centimeter
markings
•R
ule is located on the inside lip of the
workstation
•M
agnetic tool bar holds instruments
when not in use
•O
rganizer Bin-small (Qty 1) stainless
steel
•O
rganizer Bin-large (Qty 1) stainless
steel
• F our leveling pads
•S
tainless steel C-Fold paper towel
dispenser
•W
aterproof fluorescent light with (2) two
fluorescent bulbs
•G
.F.C.I. Electrical Receptacle, 1 circuit
- 15 amps
•D
uct stub connection: 46” (116.9 cm) L
x 3” (7.6 cm) W
•B
ackdraft Ventilation. Designed to safely
• E quipped with a factory installed
•A
ll plumbing and electrical work
•O
nly trade hook-up required
Organizer Bin - Small
Large Deep Sink
C-Fold Paper Towel Dispenser
G.F.C.I. Outlet
Washable Ruler
24
Optional
Accessories
MB003 Formalin Dispensing Carboy
Optional Accessories Include:
BL007
LABORATORY MIXING FAUCET
• For use with standard foot pedal
• Allows user to operate with hand
or foot control
BL047
LABORATORY MIXING FAUCET
PNEUMATIC
• For use with pneumatic foot
pedals
• Allows user to operate using hand
or foot control
BL800
DISPOSAL 1 HP.
• Heavy Duty
• Includes Solenoid and Vacuum
Breaker
CP001
COMMUNICATION PORT
• Two port Ethernet receptacles
• Allows for connection to in-house
network
• Requires facilities network tie-in
CP002
COMMUNICATION WIRE CHASE
• Conduit organizes network cables
• Eliminates clutter
MB001
SELF CONTAINED EXHAUST
SYSTEM-SINGLE
• One (1) dual blower air filtration
system complete with lighted on/
off switch, variable speed control
& filter caddy
• Two (2) potassium permangenate
filters provided with unit
• Option only for MB100 & MB200
MB003
FORMALIN DISPENSING
CONTAINER
• 2.5 Gallon capacity Nalgene poly
dispensing container
• Dispensing valve provided for
small controlled dispensing of
customer supplied formalin
25
MB004
DICTATION EQUIPMENT STAND
• Angled surface for easy viewing
of most dictation systems.
• Dictation stand is portable and
can be placed anywhere.
• Stainless steel construction.
MB005
SELF CONTAINED EXHAUST
SYSTEM-DUAL
• Two (2) dual blower fans w/filters
for air filtration complete with
lighted on/off switch and variable
speed control on one (1) fan only
• Three (3) potassium permangenate filters provided with unit
Not available on MB100 or MB200
CP001 Communication Port
MB001 Self-Contained Exhaust System - Single
MB005 Self-Contained Exhaust System - Dual
MB006
LEG FRAME
• Height, 34”
• Heavy duty all welded leg frame
with adjustable feet for leveling
• Stainless steel construction
• Option only for MB100 & MB200
MB007
FOOT PEDAL
• Dual foot pedal Hot/Cold water
control valve with swing spout
faucet
• Wrist blade handle controls are
not available with this option
• Option available on MB200 with
the purchase of a leg frame
• Shipped loose with MB200
• Also available on MB400 and
MB600
MB012 Hand Spray Rinse
MB004 Dictation Equipment Stand
MB008
FLAMMABLE STORAGE CABINET
• Dimensions: 35”H x 35” W x 22”
D Adds one extra inch to entire
station height
• Space saving cabinet for
flammable liquid storage
• 22 Gallon capacity
• Option only for MB400
• Not compatible with option
MB041(ledge and pencil drawer)
MB007 Foot Pedal
MB008 Flammable Storage Cabinet
MB006 Leg Frame
26
Optional
MB013 Halogen Light Magnifier (Single)
MB009
PERIMETER RINSE
• Full perimeter rinse on three (3)
sides.
• Control valve w/atmospheric
vacuum breaker protection
included for water flow
adjustment
MB011
SAFETY SPLASH SHIELD
• Dimension: 4” H x 5-5/6” W
MB012
HAND SPRAY RINSE
• Chrome plated brass hand
sprayer with soft spray & 60” long
high pressure hose for easy and
controlled rinsing of work surface
MB013
MAGNIFIER FOR LIGHT
• MB013 For use with light
purchase (MB016,MB022, MB053
and MB054)
• Poly magnifier with 2X
magnification
• One (1) each provided
MB015
VIDEO CAMERA ARM
• Easy positioning of camera over
full length of grossing station
• Overhead positioning with
articulating arm to support most
camera systems
MB016
HALOGEN TASK LIGHTING-DUAL
• Two (2) halogen lights on a 20”
flexible arm for convenient
positioning
• 20 wattsMB017
CAMERA STAND
• Vertical camera stand with X-Axis
& Y-Axis adjustable arm.
• Capable of supporting both digital
and 35MM type cameras.
MB019
FORMALIN COLLECTION SYSTEM
• Includes collection funnel piped
to a 2-1/2 gallon collection carboy
27
Accessories
w/easy grip handles located
under grossing station
• Quick disconnects included with
safety caps provided for safe
transport to disposal or recycling
area
• Not available on MB100, MB600
or MB670
• Formalin not included
MB022
HALOGEN TASK LIGHTING-SINGLE
• One (1) halogen lighting system
• 20 watts
• Overhead mount with 20-inch
flexible arm
MB011 Safety Splash Shield
MB026
VENTILATED TRASH CONTAINER
• Dimensions: 8-1/4” Wide x
15-5/8” Deep x 28” H
• Removable stainless steel trash
container
• 12 gallon capacity
• Connects to grossing station
ventilation system
• Not available on the MB100 or
MB200 unless leg frame is
purchased
• MB050 is not compatible with this
option
MB028
FORMALIN DISPENSING SYSTEM
CARBOY STYLE
• Dispensing system is contained
within the grossing station
• Includes pump and backsplash
mounted valve with indicator
lights for high/low formalin liquid
levels in carboy
• Easy to fill carboy through fill
port, includes funnel
• Does not include the formalin
collection system or formalin
• Option for MB100 and MB200 with
purchase of leg frame
• Also available for the MB400 and
MB600
MB019 Formalin Collection System
MB022 Halogen Task Light - Dual
MB026 Ventilated Trash Receptacle
MB017 Camera Stand
MB015 Video Camera Arm
28
Optional
Accessories
MB029 Computer CPU Bracket
MB029
COMPUTER CPU BRACKET
• Adjustable size mounting bracket for
CPU
• Keyed to mounting plate w/two (2) pins
for easy removal or installation
• Computer not included
MB031
REMOVABLE WRITING LEDGE
• For additional writing surface on
grossing stations
• Available only on the MB400 & MB600
MB041
COMBINATION PULL OUT WRITING LEDGE
AND PENCIL DRAWER
• Dimensions: 12” Wide x 3” Deep
• Convenient pull out writing ledge and
utility drawer
• Stainless steel construction
MB042
FORMALIN COLLECTION AUDIO ALARM
• Sensor audio alarm
• Alerts when container is full
MB047
PNEUMATIC FOOT PEDAL
• Foot operated water control
• Toggle on/off, foot operated
• Hand operated mixing lever located next
to faucet
• MB047 is not compatible with MB007
MB048
SHELF AND ADJUSTABLE
BRACKETS
• (1) One 14” standard shelf
29
MB049
LCD FLAT SCREEN/KEYBOARD
ADJUSTING ARM SYSTEM
• Allows positioning & of LCD display for
greater visibility
• Re-position your LCD with just a touch.
Up, down, forward and back
• Full range of motion for maximum
comfort level Keyboard Adjustable Arm
• Provides vertical and side to side motion
• Effortlessly position a keyboard for
the most comfortable typing position,
seated or standing
• Keyboard can be positioned for maximum comfort and productivity with a
range of 25.6” (65cm) extend/retract
motion and 11-1/2” (29cm) height
adjustment
• Tray tilts back at negative 5 Degree
angle for ergonomic data entry.
• Mouse tray slides out to left or right,
depending on user preference
NOTE: Flat screen, monitor, keyboard and
computer not included.
MB050
VENTILATED TRASH CONTAINER WITH
CASTERS
• Dimensions: 15” L x 15” W x 38-1/2” H
• Removable stainless steel trash
container
• 12 gallon capacity
• Connects to grossing station ventilation
system
• 3” swivel casters with brake
mechanisms
• MB023 not compatible with this option
MB051
FORMALIN DISPENSING SYSTEM
CUBITAINER STYLE
• Fits a 5 gallon cubitainer size
• Internal self-contained Includes:
• Formalin fixture
• Pump self priming with pressure switch
• Pull out system for holding cubitainer
• Cubitainer not included
• Quick self sealing disconnects fitting for
cubitainer connection
NOTE: If you chose to use this option
(MB051) you cannot use the MB028
option, they are not compatible. Available
for MB600. Can be modified to work with
MB100, MB200, and MB400
MB053
SINGLE LED GOOSENECK TASK LIGHT
•D
eck mount
•B
right white
• 3 100 Degrees K
•A
ccurate color rendering
• E nergy efficient
MB054
DUAL LED GOOSENECK TASK LIGHT
•D
eck Mount
•B
right white
• 3 100 Degrees K
•A
ccurate color rendering
• E nergy efficient
MB048 Additional Stainless Steel Shelf
MB060
HAND CRANK LEG FRAME
• Manual hand crank elevation lever
• MB006 and MB060 for use with MB100
and MB200 only
SA100
SEISMIC ANCHOR KIT
• Anchoring brackets only.
• Does not include seismic calculations
• Only available on Mopec manufactured
stainless steel equipment.
• This style cannot be used with refrigeration
units. Please contact Customer Service if
seismic anchoring is needed for a cooler
or freezer
MB055
INFRARED FAUCET
•M
otion sensor
•H
ands-free operation
MB053 LED Gooseneck Task Light - Single
MB054 LED Gooseneck Task Light - Dual
MB057
CASSETTE LABELING SHELF FOR
MB-SERIES
•S
tainless Steel Construction
•D
imensions: 29” L x 13” W
MB041 Combination Ledge and Pencil Drawer
MB059
FORMALIN CONTAINMENT
COLLECTION SYSTEM
• Includes collection funnel piped to a
2-1/2 gallon carboy w/ easy grip
handles. (Located under station)
•Q
uick disconnects included with safety
caps provide for safe transport to disposal or recycling area
• E xtra carboy with plastic lid
•S
tainless steel containment tray 12”
x 12”
• F ormalin is not included
•O
ption for MB600 and MB670 only
MB050 Mobile Ventilated
Trash Receptacle
MB049 LCD Flat Screen/Keyboard Arm
Mount System
MB057 Cassette Labeling Shelf
30
We Strive For Perfection In
Everything We Manufacture
Manufacturing
Mopec offers unmatched industrial quality, featuring the durability of heavy gauge stainless steel
on all workstation surfaces. Mopec workstations
have no painted or plastic surfaces to scratch or
rust. Their top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants, while maintaining an indelible satin finish
for years.
Mopec uses only TIG welding on all seams and
joints. Each weld is ground smooth and re-grained
to match the #4 satin finish on adjacent faces
resulting in a smooth finish. All work surface face
joints are flush and without overlaps, using 14
gauge stainless steel on exposed surfaces. Sinks
are integrally fabricated using 14 gauge stainless
steel with rounded corners and no parting seams
for easy cleaning.
31
32
QUALITY IS ENGINEERED/
BUILT IN BEFORE OUR
NAME GOES ON IT
High Standards For Manufacturing Quality
Mopec’s emphasis on quality is recognized by the following international
standards agencies:
ISO9001:2008This registration covers the Quality Management System
for the design, engineering, manufacturing, distribution,
installation of histology, morgue, pathology and necropsy
equipment and supplies.
TUV C and US TUV Rheinland of North America, Inc.
CE
Mopec Continuously Strives
For “More Green” Production
EU Certificate of Conformity
QRMQuick Response Manufacturing model focuses on
manufacturing custom-made durable products that
satisfy your delivery requirements.
We Get Greener Everyday
Mopec continuously strives to support future generations by implementing green manufacturing processes and business practices and technologies to preserve natural resources and reduce environment footprints. From office administration, engineering, manufacturing and delivery to facility maintenance, energy efficient product components,
reduction in waste materials and recycling, the MG100 is driving Mopec’s goal to be more “green” everyday.
33
Let the Mopec Solution
work for you.
34
Brilliant Tissue Marking Dyes
Mopec’s multi-colored BG020 Brilliant
Tissue marking Dye kit offers seven fast
drying and permanent marking dyes for
use with: marking of individual
surgical margins, marking of multiple
tissue samples processed in a single
cassette, and maintaining correct tissue
orientation for Mohs Surgery. Kit includes
seven 2 oz. bottles of colored dye: black,
blue, purple, red, orange, yellow and
green. Also included with kit is: one
display box, multiple wooden applicator
sticks and two flexible rulers. Each color
is available in eight ounce refill bottles.
Order Product No. BG020
Path Cloud
Proven effective against HIV-1, Herpes Simplex
2, Staphylococcus, Pseudomonas, Canine
Parvo, Tuberculosis and much more, Path Cloud
destroys a wide range of pathogenic bacteria,
viruses and fungi. The tuberculocidal meets
OSHA’s Bloodborne Pathogens Standard for
decontamination of hard, non-porous
environmental surfaces. Sold in 32 oz. spray
bottle, the powerful foaming action cleans,
disinfects and deodorizes in one easy operation.
Ideal for heavily soiled pathology surfaces
including:
• Autopsy tables
• Body trays
• Grossing stations
• Plumbing fixtures
• Dissection boards
• Dissection tables
• Laboratory counters/backsplashes
• Morgue/cutting room sinks
(Mopec’s EPA Establishment No. 5747-MI-1,
EPA Registration No 1839-83-7495)
Order Product No. BE045
Blade Handle
Length 8-5/8”
Disposable knife handle with carbon steel blade. Available with blue handle
only and includes protective sheath.
Order Product No. AJ129
AB043
AB042
Specimen Paddle Forceps
These paddle forceps hold all types of tissue with the secure grip needed to
accomplish thin sections for histologic analysis. Thin sections are essential for
proper infiltration of reagents prior to histologic study. Great for: training residents
and technicians on thin section technique, cutting thin sections of fatty tissue like
breast tissue and cutting even thickness sections of any type tissue.
Length 6-3/8” (161.9 mm)
Order Product No. AB042
Surgical Blades - Carbon Steel
100 individually wrapped non-sterile carbon #22 surgical
blades per box.
Order Product No. AJ145
Length 6” (152.4 mm)
Order Product No. AB043
For a complete catalog detailing our products and services, please call or visit our web site.
21750 Coolidge Highway • Oak Park, MI 48237
Toll Free: 800-362-8491 • Tel: 248-291-2040 • Fax: 248-291-2050
www.mopec.com

MB Series Grossing Stations

Transcription

Similar documents

kik-step®

Skate Deterrents

Product sheet BBPE050.4A

Vetus Cowl Vent Sizes and Specifications

ZIMA 126-CS-Fabrication.indd

Vertical Turbine

Feature Sheet

ISE Spec Sheet-Contractor 333 - InSinkErator

CW PDF

Hydro-Filter™ - Phoenix Truckmounts