Kati® Blitz

Transcription

Kati® Blitz
CABLE PULLING SYSTEMS
PRACTICAL SOLUTIONS FOR CABLE LAYING
CONTENT
Polykat®
Kati® Blitz
Kati® Blitz Locating
Mini-Max
Cablemax
Cablejet
Pipe Eel
Glit®
Cable Guide Heads
Duct Pullers
Polykat®
all
sy s t ems
element in
® cable pulling
X
E
K ATIM
Polykat® fibreglass profiles are the basic elements in all KATIMEX® cable pulling systems.
As a cost efficient option we also offer a economy version of fibreglass profile.
The excellent quality and versatility of Polykat® stem from its unique technological design.
Polykat® contains up to 40 % more of glass fibre than conventionell fibreglass duct rodders.
Its particular production technology and special construction make possible the combination of these
two basically contrary features which are essential for this application.
The higher the fiberglass content of the rod, the higher is its stability under shear stress.
Polykat® fibreglass profiles therefore contain a particularly large proportion of high quality glass fibre,
at 80 %.
04-2011
Cable pulling is simple, quick and precise. The difficulties associated with inserting traditional steel and
plastic rods is now once and for all a thing of the past.
www.katimex.de
the basic
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
the unique fibreglass profile
Product Information
Polykat®
Technical Information:
All fibres are embedded together in elastic polyester resin and cross wrapped to
form a compact bound core. This forms a wavy, highly resinous outer layer, which
takes up the surface tension produced when the rod is bent. This makes a very
small radius of curvature possible so that tight bends are easily passed through.
glass fibre
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
impregnation
with resin
adhesive
bundling with
cross layers
rod end
polypropylene coating
Polykat® fibreglass profiles are basic elements in all KATIMEX® Cable pulling systems
Kati® Blitz
domestic installation
Cablemax
Cablejet
underfloor
installations
Pipe Eel
street lighting &
signaling systems
underground
cabling
Polykat® fibreglass profile
Polykat® fibreglass profile
fibreglass core, polypropylene coating
sold by metre
rod-Ø*
fibreglass core- Ø
3.0 mm
4.5 mm
7.2 mm
9.0 mm
11.0 mm
breaking load
2.1 mm
3.0 mm
5.0 mm
6.2 mm
7.7 mm
5.0 kN
10.3 kN
28.0 kN
40.0 kN
65.0 kN
art.-no.
101115
102013
103195
103198
103199
* further rod-Ø on request
Polykat® fibreglass profile
Polykat® fibreglass profile
fibreglass core, integrated copper wires, polypropylene coating
www.katimex.de
sold by metre
rod-Ø*
fibreglass core- Ø
Cu-wires
3.0 mm
4.5 mm
7.4 mm
9.0 mm
11.0 mm
2.2 mm
3.0 mm
5.0 mm
6.2 mm
7.7 mm
2 x Cu
3 x Cu
6 x Cu
8 x Cu
6 x Cu
* further rod-Ø on request
breaking load
5.0 kN
10.3 kN
26.0 kN
40.0 kN
65.0 kN
art.-no.
101114
102014
103192
103197
103187
Kati® Blitz
cable pulling device for domestic installation
use
The Kati® Blitz was the first device of its kind in the world. It is perfectly
designed to pull cables into conduits even under the most difficult conditions.
Kati® Blitz compact and Kati® Blitz vario easily get through long winding tracks and in pipe systems
where cables have previously been laid. It still works where other pulling devices have already failed.
Since its introduction Kati® Blitz has proved its worth in daily use with hundred thousands
of electricians around the world.
The unique Polykat® fibreglass profile can be wound in and out quickly without knotting or
loops forming.
Threaded rod ends are attached at both ends of the rod, to which cable grips, pulling
eyes or guide heads can be attached simply.
05-2011
Kati® Blitz vario consists of two elements, the magazine case and the exchangeable
magazine. The fibreglass profile can be reeled out quickly with a crank
drive and then wound back in again after use. There is an
integrated box in the magazine case which contains
the standard accessories.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
esign and
www.katimex.de
le in d
unbeat ab
Product Information
Kati® Blitz
Technical Information:
The patented housing of Kati® Blitz provides a safe and easy storage of the
fibreglass profile without rotating outside parts.
It is available with rod lengths of 20, 30 or 50 m.
The robust, solid housing has an accessories box with a lift-up lid.
Kati® Blitz vario consists of two elements, the magazine case and the exchangeable
magazine. The rod magazines for Kati® Blitz vario are available with fibreglass rods
of 20, 30 or 50 m length.
The rod magazine can be changed very quickly.
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
rod diameters (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
3.0
1.0
50
5.0
Different types of Kati® Blitz are available
Kati® Blitz compact
1
Polykat® fibreglass profile Ø 3.0 mm
rod ends at both ends
integrated accessories box with
lift-up lid
carrying grip
accessories included
2
Kati® Blitz vario
Kati® Blitz
with crank drive, Polykat®
fibreglass profile Ø 3.0 mm
Locating
is also available as locating
system
rod ends at both ends
Find more information in our
Catalogue under Locating
Systems or at:
integrated accessories box with
lift-up lid
exchangeable rod magazine
www.katimex.com
accessories included (q.v. compact)
Accessories supplied:
· 2 flexible guide heads
Ø 7 mm & 10 mm
· 5 pulling eyes Ø 6 mm,
brass with M5 thread
·1
Kati®
Grip Powerdisk
· 1 cable grip with integral
swivel for Ø 6-9 mm cables
· 5 rod ends, brass with
M5 thread
· 3 splices, brass
· 1 special adhesive (3 g)
1 Kati® Blitz compact
rod
Rod length
length
20 m
30 m
50 m
2 Kati® Blitz vario
Rod length
rod length
20 m
30 m
50 m
weight
Weight
1.08 kg
1.18 kg
1.37 kg
Weight
weight
1.80 kg
2.00 kg
2.10 kg
art.-no.
Art.-Nr.
101820
101830
101850
Art.-Nr.
art.-no.
101420
101430
101450
ED
ROV A
IMP
L
U
M
FOR
Our recommendation:
Glit® Lubricant
ned
sig
available de
rmulations
dif ferent fo
plication
ap
of
pe
ty
e
to match th
find all accessories in the Product
Overview Accessories for Kati® Blitz
• reduces friction during cable pulling
up to 90 %
• for all kinds of pulling rods and cables
• Pulling rods can be slid through ducts
much more easily with a small amount of
Glit® applied to the rod and guide head
• silicone-free, non-flammable, skin-friendly
Art.-Nr. 101370
Product Overview
Accessories for Kati® Blitz
Kati® Blitz Pulling rod
Polykat® fibreglass profile Ø 3.0 mm
rod ends at both ends, incl. Ø 7 mm guide head and pulling eye
dimensions 245 mm x 245 mm x 45 mm
rod length
weight
art.-no.
20 m
30 m
50 m
300 g
400 g
600 g
101320
101330
101350
Cable Grip
Cable Grip with integral swivel
high tensile galvanized steel strand, back woven, M5 threaded connection
max. permitted load with a safety factor of 1,5
breaking
load (kN)
pulling
force (kN)
working
meshlength (mm)
weight
(mm)
4-6
6-9
9 - 12
12 - 15
2.0
2.0
2.0
2.0
1.3
1.3
1.3
1.3
100
120
180
230
5
5
10
20
(g)
art.-no.
108066
108060
108061
108062
Cable Grip
Cable Grip with integral pulling eye
high tensile galvanized steel strand, back woven, M5 threaded connection
max. permitted load with a safety factor of 1,5
cable-Ø
(mm)
4-6
6-9
9 - 12
12 - 15
15 - 19
19 - 25
25 - 31
breaking
load (kN)
2.0
2.0
2.0
2.0
8.1
11.7
18.5
pulling
force (kN)
1.3
1.3
1.3
1.3
5.4
7.8
12.3
working
meshlength (mm)
weight
100
120
180
230
280
290
300
5
5
10
20
30
45
75
(g)
art.-no.
108076
108070
108071
108072
108063
108064
108065
Cable Grip
Cable Grip with one eye
high tensile galvanized steel strand, back woven
max. permitted load with a safety factor of 1,5
cable-Ø breaking
(mm)
load (kN)
4-6
6-9
9 - 12
12 - 15
15 - 19
19 - 25
25 - 31
2.0
2.0
2.0
2.0
8.1
11.7
18.5
pulling
working
force (kN) meshlength (mm)
1.3
1.3
1.3
1.3
5.4
7.8
12.3
100
120
180
230
280
290
300
weight
(g)
5
5
15
25
40
60
95
art.-no.
108181
108182
108183
108187
108184
108185
108186
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
cable-Ø
05-2011
Kati® Grip Powerdisk
pulling rubber, for quick and easy pulling of fibreglass rod and cables up to Ø 6 mm
weight
art.-no.
60 g
101364
www.katimex.de
Kati® Grip Powerdisk
Product Overview
Accessories for Kati® Blitz
Kati® Grip
Kati® Grip
patented, ergonomically styled pliers made of strong resilient plastic, reduces
wear on the rod, for all pulling systems up to 4,5 mm rod diameter
dimensions 185 mm x 55 mm x 20 mm
weight
art.-no.
125 g
101369
Flexible guide head set
Flexible guide heads
brass, with readjusting spring, internal thread M5
1 VE = 3 pieces in a plastic bag
VE
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
1
1
1
1
7 mm
10 mm
13 mm
Set, 7, 10, 13 mm
weight
art.-no.
30 g
45 g
60 g
45 g
101033
101034
101035
101042
Kati® Blitz Service set
Kati® Blitz Service set
5 rod ends, 5 pulling eyes, 3 splices
1 special adhesive 3 g, repair instruction
in a plastic bag
weight
art.-no.
45 g
101245
Pulling eye
Pulling eye
brass, Ø 6 mm, internal M5 thread
1 VE = 10 pieces in a plastic bag
VE
weight
art.-no.
1
30 g
101017
Rod end
Rod end for fibreglass profile Ø 3.0 mm
brass, with external M5 thread
1 VE = 10 pieces in a plastic bag
VE
weight
art.-no.
1
30 g
101016
Splice
Splice for fibreglass profile Ø 3.0 mm
brass
www.katimex.de
1 VE = 10 pieces in a plastic bag
VE
weight
art.-no.
1
35 g
101015
Product Overview
Accessories for Kati® Blitz
Special adhesive
Special adhesive
for Polykat® fibreglass profile up to Ø 6 mm
low viscousity
content
3g
20 g
weight
art.-no.
5g
30 g
101027
103211
Glit®
Glit® Cable lubricant
new formula reduces friction during cable pulling up to 90 %
200 ml
1L
5L
packaging*
tube
bucket
bucket
weight
art.-no.
0.24 kg
1.20 kg
5.30 kg
101370
101373
101374
* find more packaging sizes in our Glit® Prospect or at www.katimex.com
Magazine case Vario
Magazin case for Kati® Blitz Vario
basic unit with crank drive without magazine and fibreglass rod
dimensions 380 mm x 265 mm x 120 mm
accessories included
without accessories
Accessories:
weight
art.-no.
1.10 kg
0.90 kg
101440
101423
5 rod ends, 5 pulling eyes, 3 splices
2 flexible guide heads Ø 7 mm & 10 mm
Magazine Vario
Magazine for Kati® Blitz Vario
fibreglass profile Ø 3,0 mm, rod ends at both ends, service set included
dimensions 245 mm x 245 mm x 70 mm
rod length
weight
art.-no.
20 m
30 m
50 m
0.60 kg
0.80 kg
1.60 kg
101520
101530
101550
Recommended extension
Driving unit
Driving unit for Kati® Blitz
with tongue /flexible tube for motor-driven
insertion of fibreglass profiles up to Ø 3 mm & 4,5 mm via drilling machine
- also available with optional length counter
Description
Driving unit for Kati® Blitz
Driving unit with length counter
weight
art.-no.
0.30 kg
0.40 kg
101816
101817
www.katimex.de
content
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
silicone-free, skin-friendly, non-flammable
X
IME
KAT
Kati® Blitz Locating
cable pulling device with detection function
ions
The Kati® Blitz Locating 2in1 combines the well known cable pulling device Kati® Blitz and a new
type of slip ring transformer. The unique Polykat® fibreglass profile with its integrated copper wires
allows the usage as a cable pulling device and as a route locating unit.
It is useable with customary cable detectors which specific locating and tracking of the conduit course
or blocked places is possible.
The unique Polykat® fibreglass rod can be wound in and out quickly without knotting or loops forming.
Threaded rod ends are attached at both ends of the rod, to which cable grips, pulling eyes or guide
heads can be attached simply.
The integrated, interchangeable slip ring transformer avoids rotating outside parts and allows to
connect the transmitter without twisting the cables.
04-2011
The universal screw connection allows the use of the same accessories as for the Kati® Blitz and
Kati® Blitz Locating 2in1 will be also delivered with full range of accessories.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
o applicat
www.katimex.de
- tw
one device
Product Information
Kati® Blitz Locating
Technical Information:
Cable pulling device with detection function
integrated slip ring, fitted with rod end at the end of the fibreglass profile,
accessories compartment with lift-up lid, carrying grip.
1
2 in
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
rod diameters (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
3.0
1.0
50
5.0
rod length
weight
art.-no.
20 m
30 m
50 m
1.15 kg
1.25 kg
1.50 kg
104820
104830
104850
Different accessories of Kati® Blitz Locating are available
Kati® Blitz Locating
1
Polykat® fibreglass profile Ø 3.0 mm
rod ends at both ends
integrated accessories box with
lift-up lid
carrying grip
Polykat® fibreglass profile
2
Cable detector
for Kati® Blitz locating
optional
fitted with rod ends,
flexible guide head Ø 7 mm and
pulling eye included
to use with
Kati® Blitz Locating
Find more information in our
Catalogue under Locating Systems
or at:
Accessories supplied:
· 2 flexible guide heads
Ø 7 mm & 10 mm
· 5 pulling eyes Ø 6 mm,
brass with M5 thread
· 1 Kati® Grip Powerdisk
· 1 cable grip with integral
swivel for Ø 6-9 mm cables
· 5 rod ends, brass with
M5 thread
www.katimex.com
2 Pulling rod for Kati® Blitz locating
rod length
20 m
30 m
50 m
weight
art.-no.
0.30 kg
0.45 kg
0.70 kg
104320
104330
104350
Locating Cable detector
· 3splices, brass
· 1 special adhesive (3g)
Locating
art.-no.
transmitter/receiver
Our recommendation:
104800
ED
ROV A
IMP
L
U
M
FOR
Glit® Lubricant
signed
available de
rmulations
ication
dif ferent fo
pl
ap
of
pe
e ty
to match th
find all accessories in the Product
Overview Accessories for Kati® Blitz
• reduces friction during cable pulling
up to 90 %
• for all kinds of pulling rods and cables
• Pulling rods can be slid through ducts
much more easily with a small amount of
Glit® applied to the rod and guide head
• silicone-free, non-flammable, skin-friendly
art.-no. 101370
Mini-Max
underfloor cable pulling system
X
IME
KAT
The tool´s special is its extreme light weight. Furthermore it convinces of the cages small diameter of
30 cm and 5 cm width. Its suitable mounted grip gives an excellent handling and makes the device slightly wider. The highlight: Mini-Max can simply be fitted to a belt and both hands will remain free!
The unique Polykat® fibreglass profile combines the shear strength of a grid pole with the flexibility
required in everyday practice. Up to 40 m fibreglass profile are stored in the devices cage on smallest
space. A flexible special shaped guide head fitted to the front of the rod slides past all cables in the conduit without getting caught up.
05-2011
Even heavy occupied underfloor systems can be passed through easily.
Guide heads and cable grips can be connected in variable configurations.
www.katimex.de
Like his „big brother“ Cablemax, Mini-Max was specially developed for installations in offices, department stores and industrial buildings.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
size,
weight and ation comfor t
f
o
m
u
Im
MIN
of applic
MA XImum
Product Information
Mini-Max
Technical Information:
Mini-Max consists of a light, mobile cage with handle.
The integrated brake prevents the Polykat® fibreglass rod from reeling out of the
basket under its own tension.
rod diameter (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Accessories supplied:
4.5
1.5
100
10.3
1 guide head with pulling eye, Ø 11 mm,
2 rod ends, installed
rod length
weight
art.-no.
40 m
1.4 kg
102940
Mini-Max - efficient, compact and manageable
www.katimex.de
The ideal tool for time saving laying of cables even under difficult conditions.
Find all accessories in the Product Overview Accessories for Cablemax or at www.katimex.com
Cablemax
underfloor cable pulling system
The conduit snake Cablemax was specially developed for installations in offices,
department stores and industrial buildings.
The unique Polykat® fibreglass profile combines the shear strength of a grid pole with the flexibility
required in everyday practice. Up to 80 m fibreglass profile are stored in the devices aluminium cage
on smallest spaces. A flexible special shaped guide head screwed onto the rod slides past all
cables in the conduit without getting caught up.
05-2011
Even heavy occupied underfloor systems can be passed through easily.
The universal screw connection allows the use of the same accessories as for the Kati® Blitz.
Guide heads and cable grips can be connected in variable configurations.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
t for
ns
r ins t allatio
under floo
www.katimex.de
the exper
Product Information
Cablemax
Technical Information:
The Cablemax has a sturdy steel tube frame in which the aluminium
storage basket for the fibreglass profile is housed. Up to 80 m of rod can be
stored here, saving a lot of space.
A light adjustable brake prevents the Polykat® fibreglass profile from reeling
out of the basket under its own tension. Rod ends with M5 thread
at both ends of the rod make it possible to work in both directions.
Guide heads and cable grips can be connected simply and quickly.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
rod diameter (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
Different types of Cablemax are available
Cablemax®
1&2
Cablemax M10
fitted with rod end M10 (internal),
suitable for locating sonde of
Radiodetection Systems
included / without accessories
without accessories
Accessories supplied:
· 1 guide head with pulling eye
Ø 11mm, brass with M5
thread
· 2 pulling eyes Ø 6 mm,
brass with M5 thread
· 3 rod ends, brass
with M5 thread
· 2 splices, brass
· 1 special adhesive (3 g)
locating
optional*
Polykat® fibreglass profile Ø 4.5 mm
rod ends at both ends
galvanized steel tube frame
aluminium storage basket
Cablemax
is also available as locating
system
Find more information in our
catalogue under
Locating Systems or at:
*available on request
www.katimex.de
1 accessories included
rod length
40 m
60 m
80 m
weight
6.0 kg
6.4 kg
7.0 kg
art.-no.
102044
102046
102048
2 without accessories
rod length
40 m
60 m
80 m
weight
6.0 kg
6.4 kg
7.0 kg
art.-no.
102024
102026
102028
Our recommendation:
Glit® Lubricant
ED
ROV A
IMP
L
U
M
FOR
signed
available de
rmulations
ication
dif ferent fo
pl
ap
of
pe
e ty
to match th
find all accessories in the Product
Overview Accessories for Cablemax
www.katimex.de
4.5
1.5
100
10.3
• reduces friction during cable pulling
up to 90 %
• for all kinds of pulling rods and cables
• Pulling rods can be slid through ducts
much more easily with a small amount of
Glit® applied to the rod and guide head
• silicone-free, non-flammable, skin-friendly
art.-no. 101370
Product Overview
Accessories for Cablemax
Cablemax Pulling rod
Polykat® fibreglass profile Ø 4.5 mm
rod ends at both ends, incl. 1 guide head with pulling eye Ø 11 mm
dimensions 400 mm x 400 mm x 70 mm
rod length
weight
art.-no.
40 m
60 m
80 m
1.3 kg
1.7 kg
2.1 kg
102034
102036
102038
Cable Grip
Cable Grip with integral swivel
high tensile galvanized steel strand, back woven, M5 threaded connection
max. permitted load with a safety factor of 1.5
(mm)
breaking
load (kN)
4-6
6-9
9 - 12
12 - 15
2.0
2.0
2.0
2.0
pulling
working
force (kN) meshlength (mm)
1.3
1.3
1.3
1.3
100
120
180
230
weight
(g)
5
5
10
20
art.-no.
108066
108060
108061
108062
Cable Grip
Cable Grip with integral pulling eye
high tensile galvanized steel strand, back woven, M5 threaded connection
max. permitted load with a safety factor of 1.5
cable-Ø
(mm)
breaking
load (kN)
4-6
6-9
9 - 12
12 - 15
15 - 19
19 - 25
25 - 31
2.0
2.0
2.0
2.0
8.1
11.7
18.5
pulling
working
force (kN) meshlength (mm)
1.3
1.3
1.3
1.3
5.4
7.8
12.3
100
120
180
230
280
290
300
weight
(g)
5
5
10
20
30
45
75
art.-no.
108076
108070
108071
108072
108063
108064
108065
Cable Grip
Cable Grip with one eye
high tensile galvanized steel strand, back woven
max. permitted load with a safety factor of 1.5
cable-Ø
(mm)
breaking
load (kN)
4-6
6-9
9 - 12
12 - 15
15 - 19
19 - 25
25 - 31
2.0
2.0
2.0
2.0
8.1
11.7
18.5
pulling
force (kN)
1.3
1.3
1.3
1.3
5.4
7.8
12.3
working
meshlength (mm)
100
120
180
230
280
290
300
weight
(g)
5
5
15
25
40
60
95
art.-no.
108181
108182
108183
108187
108184
108185
108186
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
cable-Ø
04-2011
Kati® Grip Powerdisk
pulling rubber, for quick and easy pulling of fibreglass profile and cables up to Ø 6 mm
weight
art.-no.
50 g
101364
www.katimex.de
Kati® Grip Powerdisk
Product Overview
Accessories for Cablemax
Kati® Grip
Kati® Grip
patented, ergonomically styled pliers made of strong resilient plastic, reduces
wear on the rod, for all pulling systems up to 4.5 mm rod diameter
dimensions 185 mm x 55 mm x 20 mm
weight
art.-no.
125 g
101369
Flexible guide head set
3 Flexible guide heads
brass, with readjusting spring, internal thread M5
1 VE = 3 pieces in a plastic bag
VE
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
1
1
1
1
7 mm
10 mm
13 mm
Set, 7, 10, 13 mm
weight
art.-no.
30 g
45 g
60 g
45 g
101033
101034
101035
101042
Cablemax Service set
Cablemax Service set
5 rod ends, 5 pulling eyes, 3 splices
1 special adhesive 3 g, repair instruction
In a plastic bag
weight
art.-no.
50 g
102055
Guide head
Guide head with pulling eye
brass, internal thread M5
1 VE = 3 pieces in a plastic bag
diameter
weight
art.-no.
11 mm
45 g
102018
Pulling eye
Pulling eye
brass, internal thread M5
1 VE = 10 pieces in a plastic bag
diameter
weight
art.-no.
6 mm
30 g
101017
Rod end
Rod end for fibreglass profile Ø 4.5 mm
brass, external thread M5
www.katimex.de
1 VE = 10 pieces in a plastic bag
weight
art.-no.
30 g
102017
Product Overview
Accessories for Cablemax
Splice
Splice for fibreglass profile Ø 4.5 mm
brass
1 VE = 10 pieces in a plastic bag
length
weight
art.-no.
50 g
102008
content
weight
art.-no.
3g
20 g
5g
30 g
101027
103211
Special adhesive
Special adhesive
for Polykat® fibreglass profile up to Ø 6 mm
Glit® Cable lubricant
new formula reduces friction during cable pulling up to 90 %
silicone-free, skin-friendly, non-flammable
content
200 ml
1L
5L
packaging*
weight
art.-no.
tube
bucket
bucket
240 g
1200 g
5300 g
101370
101373
101374
* find more packaging sizes in our Glit® Prospect or at www.katimex.com
Recommended extension
Driving unit
Driving unit Cablemax
with tongue /flexible tube for motor-driven
insertion of fibreglass profiles up to Ø 3 mm & 4.5 mm via drilling machine
- also available with optional length counter
description
Driving unit for Cablemax
Driving unit with length counter
Molchsender und Adapter
weight
art.-no.
270 g
360 g
102021
102022
www.katimex.de
Glit®
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
low viscousity
Cablejet
variable cable pulling system
ct
Within the KATIMEX® product range, the innovative Cablejet lies between the popular
Cablemax and Pipe Eel products.
For many years the Cablejet has been used extensively by electrical construction companies,
cable laying specialists and power supply contractors. The Cablejet has been used for news
network cabling, street lighting and signaling systems and civil engineering projects where
power cables are laid.
The Polykat® fibreglass profile provides high push force stability and flexibility.
One special model is suitable for the location in non-conducting pipes.
04-2011
With its folding frame, the Cablejet is surprisingly compact and it can be fitted comfortably
into a car for transportation. This compact design also means that when storing the cablejet
valuable space can be saved.
The robust and sturdy design ensures that the Cablejet is ideal for working on site, the stable,
corrosion proof steel construction and large footprint ensures that the Cablejet can be used
safely and efficiently in such working conditions.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
y & compa
www.katimex.de
light, hand
Product Information
Cablejet
Technical Information:
The Cablejet is made with a corrosion-proof steel tube construction.
The basket has a special store and bearings and can hold up to 120 m of
Polykat® fibreglass rod.
An integral brake ensures that the Polykat® fibreglass rod reels out of the basket
as desired. Glued and bolted rod ends with a M12 thread at both ends of the rod
make it possible to work in both directions so that guide heads, cable grips or
special accessories such as detection devices can be screwed on easily and in
variable configurations.
KATIMEX offers a wide range of additonal accessories designed to match the type
of special working conditions.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
rod diameter (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
Different types of Cablejet are available
Cablejet
1
Polykat® fibreglass profile Ø 7,2mm
rod ends at both ends
folding frame, galavanized steel
tube construction
integrated brake
integrated rod guiding device
Cablejet M10
optional*
Cablejet
fitted with rod end M10 (internal),
suitable for locating sonde of
Radiodetection Systems
locating
is also available as locating
system
accessories included
Find more information in our
catalogue under Locating Systems
or at:
*see recommended extension
www.katimex.com
accessories included
Accessories supplied:
· 1 guide head with pulling
head Ø 25 mm, aluminium
· 1 shackle, bolt-Ø 10 mm
· 2 rod ends
· 1 splice
· 4 dowel pins
1 accessories included
rod length
40 m
60 m
80 m
100 m
120 m
weight
art.-no.
7.8 kg
9.2 kg
10.2 kg
11.5 kg
12.0 kg
103502
103504
103506
103508
103509
· 1 special adhesive (20 g)
Our recommendation:
Glit® Lubricant
d
le designe
availab
rmulations
n
dif ferent fo
of applicatio
pe
ty
e
th
to match
www.katimex.de
7.2
7.5
190
28.0
find all accessories in the Product
Overview for Cablejet
• reduces friction during cable pulling
up to 90 %
• for all kinds of pulling rods and cables
• Pulling rods can be slid through ducts
much more easily with a small amount of
Glit® applied to the rod and guide head
• silicone-free, non-flammable, skin-friendly
ED
ROV A
IMP
L
U
M
FOR
Product Overview
Accessories for Cablejet
Cablejet Pulling rod
Polykat® fibreglass profile Ø 7.2 mm
2 rod ends with M12 thread, incl. 1 guide head with pulling eye Ø 25 mm and shackle
dimensions 640 mm x 640 mm x 70 mm
rod length
weight
art.-no.
40 m
60 m
80 m
100 m
120 m
3.4 kg
4.7 kg
6.0 kg
7.1 kg
10.4 kg
103552
103554
103556
103558
103559
weight
art.-no.
Cable Grip
cable-Ø
(mm)
breaking
load (kN)
10 - 20
20 - 30
30 - 40
40 - 50
50 - 65
18.8
22.6
37.0
55.0
55.0
pulling
working
force (kN) mesh length* (mm)
9.4
11.3
18.5
27.5
27.5
900
900
900
900
900
(kg)
0.25
0.35
0.50
0.80
0.85
108000
108001
108002
108003
108004
max. permitted load with a safety factor of 2
* refers to the mounted cable grip
find more Cable Grips in our Prospect Cable Grips for Underground Cabling or at www.katimex.com
Swivel
Swivel
with double axial bearing, stainless steel
diameter
length
(mm)
max.
tension* (kN)
breaking
load (kN)
weight
(kg)
art.-no.
16
20
22
25
32
35
38
41
64
78
86
98
121
130
143
152
3.3
5.0
10.0
15.6
22.2
31.1
40.0
44.5
10.0
15.0
30.0
47.0
67.0
93.0
120.0
133.0
0.06
0.12
0.15
0.23
0.45
0.63
0.77
0.95
107183
107173
107174
107175
107176
107177
107184
107181
(mm)
*max. tension with a safety factor of 3 for horizontal tension
find more Swivels in our Prospect Swivels or at www.katimex.com
Swivel connector
Swivel connector
galvanized steel, with M12 threaded connections at both ends, for connecting
two fibreglass profiles
Ø
length
weight
art.-no.
30 mm
85 mm
0.36 kg
103212
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Cable Grip with one eye
high tensile galvanized steel strand, back woven
05-2011
Guide head
for ducts from Ø 100 mm, aluminium with internal M12 thread
Ø
length
weight
art.-no.
40 mm
80 mm
0.18 kg
103207
www.katimex.de
Guide head
Product Overview
Accessories for Cablejet
Guide head
Guide head with pulling eye
aluminium, with internal M12 thread
diameter
bore-Ø
length
weight
art.-no.
18 mm
25 mm
11 mm
13 mm
55 mm
60 mm
20 g
40 g
103208
103206
clear
width
weight
art.-no.
11 mm
14 mm
17 mm
21 mm
27 mm
30 mm
47 mm
60 g
85 g
195 g
360 g
750 g
1000 g
4000 g
100493
100491
100494
100495
100496
100497
100498
Shackle
Shackle with smooth bolt, shape B
according to DIN 82101 with flat head screw, galvanized
(except 100493)
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
bolt-Ø
max. tensile frame-Ø
strength
8 mm
10 mm
12 mm
16 mm
20 mm
22 mm
36 mm
2.6 kN
4.0 kN
6.3 kN
10 kN
16 kN
20 kN
50 kN
8 mm
8 mm
10 mm
13 mm
17 mm
19 mm
30 mm
Cablejet Service set
Cablejet Service set
2 rod ends with external M12 thread, 1 splice, 1 special adhesive 20 g,
4 dowel pins, repair instruction
in a plastic bag
weight
art.-no.
120 g
103595
Rod end
Rod end for fibreglass profile Ø 7.2 mm
brass with external M12 thread
length
weight
art.-no.
40 mm
40 g
103249
Splice
Splice for fibreglass profile Ø 7.2 mm
brass
length
weight
art.-no.
50 mm
20 g
103487
www.katimex.de
Special adhesive
Special adhesive
for Polykat® fibreglass profiles larger than Ø 6 mm
high viscosity
content
weight
art.-no.
20 g
30 g
103210
Product Overview
Accessories for Cablejet
Duct cleaning brush
Duct cleaning brush
synthetic or steel wire brush, pulling eyes attached at both ends
duct-Ø
brush
weight
art.-no.
80 mm
100 mm
80 mm
100 mm
synthetic
synthetic
steel
steel
0.6 kg
1.2 kg
0.5 kg
1.1 kg
103218
103219
103220
103221
Duct cleaning brush
spiralling
weight
art.-no.
left
right
1.3 kg
1.3 kg
103250
103251
Coupling device
Coupling device
robust aluminium construction, maintenance free coupling cage with special
coupling mechanism
diameter
tensile
load capacity
length
weight
art.-no.
78 mm
3 kN
210 mm
0.9 kg
103280
Glit® F200
Glit® F200 high performance cable lubricant for underground cabling
for heavy cables and long pulls, friction can be reduced more than 50 %
silicone-free, skin-friendly, non-flammable
content
packaging*
weight
art.-no.
10 L
20 L
30 L
canister
canister
canister
10.4 kg
20.7 kg
31.3 kg
101376
101377
101378
* find more packaging sizes in our Glit® Prospect or at www.katimex.com
Recommended extension
Length counter
Length counter for Cablejet
for simple and quick measuring of underground ducts or pipes
no inefficient marking, pacing out or measuring is required and accurate results
are achieved using the length counter
dimensions 120 mm x 115 mm x 110 mm
Length counter for Cablejet
weight
art.-no.
0.7 kg
103049
www.katimex.de
duct-Ø
100 mm
100 mm
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Duct cleaning brush
with flat spiral steel wire brush, pulling eyes attached at both ends
length approx. 500 mm
Product Overview
Recommended extension
Sondesystem
Sondesystem
Transmitter for tracking in non-metallic conduits and pipes.
Battery-operated, with threat M10. In combination with M12/M10 adapter suitable
for all Cablejet and Pipe Eel devices with external M12 threat.
type
Transmitter
Transmitter
Adapter Ø 18 mm
Adapter Ø 39 mm
max. depth
diameter
weight
art.-no.
up to 4 m
up to 5 m
18 mm
39 mm
22 mm
42 mm
0.10 kg
0.20 kg
0.03 kg
0.12 kg
104047
104068
104048
104069
Sondesystem
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Locating Devices
Locating Devices
for point and route location
Point and route analysis can be primarily undertaken
using this universal locating system. A sonde is attached
to the equipment at the beginning of the fibreglass rod
which can be located easily thanks to a particularly
strong field. Point location is used for locating defective
points in pipeline systems such as blockages, sunken
sections of pipe etc. The transmitter is connected to the connection box via two cables (see illustration). Route location is
used for tracking entire pipe courses. The transmission takes place along the entire length of the fibreglass profile. This
version has the advantage compared with simple „pig transmitters“ that only one person is required for locating work
and losing the signal is excluded.
Locating Devices
for route locating
Route location can be used for tracking of entire pipe
courses. The transmission cable is connected between
transmitter and locating rodder. The second connection of
the transmitter is earthed (see illustration).
This fibreglass rod contains one or more copper wires that
emit a locatable signal over the entire band length via the connection of the transmitter.
This signal can be picked up, dependent on the transmission and receiving equipment and local and structural
circumstances, down to a depth of several meters.
Jet with Sondesystem
Locating Device for Point and Route Locating
Polykat® fibreglass Ø 7.4 mm with integrated copper wires
sonde for end point determination, connection box with socket and pins for two
connections, galvanized steel frame and reel Ø 650 mm
rod length
rod-Ø
weight
art.-no.
30 m
60 m
90 m
120 m
7,4 mm
7,4 mm
7,4 mm
7,4 mm
7.5 kg
9.6 kg
11.7 kg
13.8 kg
104070
104073
104076
104077
Pipe Eel
cable pulling system for underground engineering
The Pipe Eel (Röhrenaal®) - often referred to as duct rodder, has a quality frame of galvanized
steel tube construction which is screwed together.
Pipe Eel was introduced in 1974 as the world‘s first cable pulling device to be equipped with a
high-quality Polykat® fibreglass profile. The combination of stability under shear stress and flexibility
was a considerable improvement on traditional cable pulling aids. Work was made so much easier
as the Pipe Eel was very light and easy to use and soon became popular with telecom engineers
and for power cabling on construction sites. Today, as then the device allows the pulling of light and
medium duty cables in one simple run.
Attachments such as cable grips or pulling eyes can be connected with both ends of the rod.
Cables and winching wires are pulled into ducts, conduits, cable protection piping or cable swivel
connector. In this way cable and wire can be pulled over twice the distance.
05-2011
The advantages of using the Pipe Eel have grown continually with the addition of more innovative
accessories and attention to detail. An integral brake prevents the Polykat® fibreglass profile from
reeling out of the basket under its own tension. The ergonomic shape makes it and with its compact
design, it can easily be transported by car to site.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
ion
www.katimex.de
icat
lecommun
e
t
r
fo
t
r
e
the exp
g
cable layin
and po w er
Product Information
Pipe Eel
Technical Information:
The duct rodder Pipe Eel - Röhrenaal® is a corrosion proof, completely
galvanized steel tube construction. The cage itself has special bearings and the
largest type Ø 1000 mm can take up to 500 m Polykat® fibreglass profile.
An integral brake ensures that the Polykat® fibreglass profile reels out of the
basket as desired. Glued and bolted rod ends with a M12 thread at both ends of
the rod make it possible to work in both directions so that guide heads, cable grips
or special accessories such as detection devices can be screwed on easily and in
variable configurations.
KATIMEX® offers a wide range of additonal accessories designed to match the type
of special working conditions.
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
rod diameter (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
9
10
240
40
Different types of Pipe Eel are available
1
Pipe Eel 9 mm
Pipe Eel 11 mm
2
Pipe Eel M10
Optional*
Basket-Ø 750 mm
Polykat® fibreglass profile Ø 9 mm
up to 150 m length
rod ends M12 at both ends
galvanized tube construction
integral brake
Basket-Ø 1000 mm
Polykat® fibreglass profile Ø 11mm
up to 500 m Length
rod ends M12 at both ends
galvanized tube construction
integral brake
fitted with rod end M10 (internal),
suitable for locating sonde of
Radiodetection Systems
accessories included
accessories included (q. v. 9 mm)
*see recommended extension
Accessories supplied:
· 1 guide head with pulling
eye Ø 25 mm, aluminium
1
· 1 shackle, bolt-Ø 10 mm
· 2 rod ends
· 1 splice
· 4 dowel pins
· 1 special adhesive (20 g)
find all accessories in the Product
Overview for Pipe Eel
2
without accessories
Pipe Eel 9 mm
rod length
weight
art.-no.
40 m
60 m
80 m
100 m
120 m
150 m
16 kg
18 kg
19 kg
20 kg
23 kg
26 kg
103004
103006
103008
103010
103012
103014
rod length
weight
art.-no.
120 m
150 m
180 m
200 m
250 m
300 m
350 m
400 m
450 m
500 m
33 kg
37 kg
42 kg
44 kg
51 kg
58 kg
62 kg
71 kg
74 kg
80 kg
103017
103015
103016
103020
103025
103030
103035
103040
103045
103048
Pipe Eel 11 mm
11
15
390
45
Product Overview
Accessories for Pipe Eel
Pipe Eel Pulling rod
Polykat® fibreglass profile Ø 9 mm
2 rod ends with M12 thread, incl. 1 guide head with pulling eye Ø 25 mm and shackle
rod length
weight
art.-no.
40 m
60 m
80 m
100 m
120 m
150 m
3.6 kg
5.7 kg
7.0 kg
9.6 kg
11.0 kg
14.3 kg
103070
103072
103074
103076
103078
103079
Pipe Eel Pulling rod
17 kg
20 kg
24 kg
28 kg
36 kg
41 kg
43 kg
55 kg
57 kg
60 kg
103080
103081
103082
103086
103091
103096
103097
103098
103099
103100
weight
art.-no.
Cable Grip
Cable Grip with one eye
high tensile galvanized steel strand, back woven
cable-Ø
(mm)
breaking
load (kN)
10 - 20
20 - 30
30 - 40
40 - 50
50 - 65
18.8
22.6
37.0
55.0
55.0
pulling
working
force (kN) mesh length* (mm)
9.4
11.3
18.5
27.5
27.5
900
900
900
900
900
(kg)
0.22
0.35
0.50
0.83
0.85
108000
108001
108002
108003
108004
max. permitted load with a safety factor of 2
* refers to the mounted cable grip
find more Cable Grips in our Prospect Cable Grips for Underground Cabling or at www.katimex.com
Swivel
Swivel
with double axial bearing, stainless steel
max.
breaking
diameter
length
(mm)
(mm)
tension* (kN) load (kN)
16
20
22
25
32
35
38
41
51
60
76
64
78
86
98
121
130
143
152
178
262
349
3.3
5.0
10.0
15.6
22.2
31.1
40.0
44.5
66.7
110.0
222.0
10.0
15.0
30.0
47.0
67.0
93.0
120.0
133.0
200.0
330.0
667.0
05-2011
*max. tension with a safety factor of 3 for horizontal tension
find more Swivels and Accessories in our brochure Swivels or at www.katimex.com
weight
(kg)
art.-no.
0.06
0.12
0.15
0.23
0.45
0.63
0.77
0.95
1.70
3.50
7.70
107183
107173
107174
107175
107176
107177
107184
107181
107178
107182
107179
www.katimex.de
120 m
150 m
180 m
200 m
250 m
300 m
350 m
400 m
450 m
500 m
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Polykat® fibreglass profile Ø 11 mm
2 rod ends with M12 thread, incl. 1 guide head with pulling eye Ø 25 mm and shackle
rod length
weight
art.-no.
Product Overview
Accessories for Pipe Eel
Swivel Connector
Swivel connector
galvanized steel, with M12 threaded connections at both ends, for connecting
two fibreglass profiles
diameter
length
weight
art.-no.
30 mm
85 mm
360 g
103212
Guide head
Guide head
for ducts from Ø 100 mm, aluminium with internal M12 thread
diameter
length
weight
art.-no.
40 mm
80 mm
180 g
103207
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Guide head
Guide head with pulling eye
aluminium, with internal M12 thread
diameter
bore-Ø
length
weight
art.-no.
18 mm
25 mm
11 mm
13 mm
55 mm
60 mm
20 g
40 g
103208
103206
clear
width
weight
art.-no.
11 mm
14 mm
17 mm
21 mm
27 mm
30 mm
47 mm
60 g
85 g
195 g
360 g
750 g
1000 g
4000 g
100493
100491
100494
100495
100496
100497
100498
Shackle
Shackle with smooth bolt, shape B
according to DIN 82101 with flat head screw, galvanized
(except 100493)
bolt-Ø
max. tensile frame-Ø
strength
8 mm
10 mm
12 mm
16 mm
20 mm
22 mm
36 mm
2.6 kN
4.0 kN
6.3 kN
10 kN
16 kN
20 kN
50 kN
8 mm
8 mm
10 mm
13 mm
17 mm
19 mm
30 mm
Pipe Eel Service set
Pipe Eel 9 mm Service set
2 rod ends with external M12 thread, 1 splice, 1 special adhesive 20 g
4 dowel pins, repair instruction
in a plastic bag
weight
art.-no.
140 g
103138
Pipe Eel Service set
Pipe Eel 11 mm Service set
2 rod ends with external M12 thread, 1 splice, 1 special adhesive 20 g
4 dowel pins, repair instruction
in a plastic bag
weight
art.-no.
150 g
103139
Product Overview
Accessories for Pipe Eel
Rod end
Rod end for fibreglass profile Ø 9 mm
brass with external M12 thread
length
weight
art.-no.
72 mm
40 g
103200
Rod end
weight
art.-no.
72 mm
35 g
103202
Splice
Splice for fibreglass profile Ø 9 mm
brass
length
weight
art.-no.
80 mm
45 g
103203
Splice
Splice for fibreglass profile Ø 11 mm
brass
length
weight
art.-no.
80 mm
45 g
103205
Special adhesive
Special adhesive
for Polykat® fibreglass profile larger than Ø 6 mm
high viscousity
content
weight
art.-no.
20 g
30 g
103210
Duct cleaning brush
Duct cleaning brush
synthetic or steel wire brush, pulling eyes attached at both ends
duct-Ø
brush
weight
art.-no.
80 mm
synthetic
0.6 kg
103218
100 mm
80 mm
100 mm
synthetic
steel
steel
1.2 kg
0.5 kg
1.1 kg
103219
103220
103221
www.katimex.de
length
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Rod end for fibreglass profile Ø 11 mm
brass with external M12 thread
Product Overview
Accessories for Pipe Eel
Duct cleaning brush
Duct cleaning brush
with flat spiral steel wire brush, pulling eyes attached at both ends
length approx. 500 mm
duct-Ø
spiralling
weight
art.-no.
100 mm
100 mm
left
right
1.30 kg
1.30 kg
103250
103251
Coupling device
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Coupling device
robust aluminium construction, maintenancefree coupling cage with special
coupling mechanism
diameter
tensile
load capacity
lenght
78 mm
3 kN
210 mm
weight
art.-no.
0.90 kg
103280
Glit® F200
Glit® F200 high performance cable lubricant for underground cabling
for heavy cables and long pulls, friction can be reduced more than 50%
silicone-free, skin-friendly, non-flammable
content
packaging*
weight
art.-no.
10 L
20 L
30 L
canister
canister
canister
10.40 kg
20.70 kg
31.30 kg
101376
101377
101378
* find more packaging sizes in our Glit® Prospect or at www.katimex.com
Recommended extension
Length counter
Length counter for Pipe Eel
for simple and quick measuring of underground ducts or pipes.
No inefficient marking, pacing out or measuring is required and accurate results
are achieved using the length counter.
dimensions 120 mm x 115 mm x 110 mm
description
weight
art.-no.
Length counter for Pipe Eel
0.70 kg
103050
Sondesystem
Sondesystem
Transmitter for tracking of non-metallic conduits and pipes.
Battery-operated, with thread M10. In combination with M12/M10 adapter suitable
for all Cablejet and Pipe Eel devices with M12 thread.
type
Transmitter
Transmitter
Adapter Ø 18 mm
Adapter Ø 39 mm
max. depth
diameter
weight
art.-no.
up to 4 m
up to 5 m
18 mm
39 mm
22 mm
42 mm
0.10 kg
0.20 kg
0.03 kg
0.12 kg
104047
104068
104048
104069
VED
O
R
IMP
LA
U
M
FOR
ion
ilable
of applicat
lations ava
u
e
p
m
y
r
t
y
fo
r
t
e
n
ev
dif fere
t o match
designed
NEW - the improved formula
Glit® lubricants are available in a wide range of different formulations to match nearly every
type of application. Its new formula reduces friction during cable pulling up to 90 %.
Glit® is the optimal lubricant for all common coating materials.
New technologies allow the production of ecologically friendly greases, that meet the high demands
when pulling cables
The use of Glit® is especially recommended when working over long distances, in heavily occupied ducts
or under floor channels. It can be used in small quantities as it spreads very easily.
Glit® has proved its worth in daily use for years.
Silicone-free, skin-friendly, non-flammable
04-2011
Advice: For further information please refer to the material safety data sheet.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Cable lubricant
www.katimex.de
Glit®
Product Overview
Glit®
Glit®
Glit® is our proven lubricant for domestic installations
It is optimized for the usage with our Kati® Blitz and Cablemax.
Its new formula reduces friction during cable pulling considerable.
content
packaging
weight
art.-no.
200 ml
200 ml/tube
1L
5L
10 L
tube
10 tubes/display box
bucket
bucket
bucket
0.24 kg
2.54 kg
1.10 kg
5.20 kg
10.60 kg
101370
101371
101373
101374
101375
Glit® F100
Glit® F100 is a proven high performance lubricant for cable installations where
longer pulling distances and higher pulling speeds are typically encountered
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
content
1L
5L
10 L
20 L
30 L
packaging
bottle
canister
canister
canister
canister
weight
art.-no.
1.10 kg
5.20 kg
10.20 kg
20.70 kg
33.00 kg
101384
101385
101386
101387
101388
Glit® F200
Glit® F200 is a proven high performance lubricant which is used
for cable installation projects with heavy cables and long pulls
content
10 L
20 L
30 L
60 L
packaging
canister
canister
canister
barrel
weight
art.-no.
10.40 kg
20.70 kg
31.30 kg
65.00 kg
101376
101377
101378
101379
Glit® Blue
Glit® Blue is a proven high performance lubricant which is used
for cable installations with heavy cables and short to medium long pulls
content
10 L
20 L
30 L
packaging
canister
canister
canister
weight
art.-no.
10.20 kg
20.70 kg
33.00 kg
101380
101381
101382
Glit® Air
Glit® Air is a proven high performance lubricant
used with air-assisted cable blowing and pushing systems
content
packaging
weight
1L
5L
10 L
20 L
bottle
canister
canister
canister
art.-no.
1.10 kg
5.20 kg
10.20 kg
20.70 kg
101390
101391
101392
101393
weight
art.-no.
1.05 kg
107080
Lubricant Pump
For Glit®, Glit® F200 and
Glit® Blue
pump incl. adapter
fitted for canister 20 L & 30 L
Cable Guide Heads
for direct insertion of cables into short conduits
se
By easy screwing of the heads onto the cables those can be pushed easily and quickly into short
conduits.
previous working steps:
•
•
•
•
working steps with cable guide head:
insertion of the pulling rod
•
connection of cable and pulling rod
pulling-in
•
disconnection of cable and rod
screwing of the cable guide head onto
the cable
insertion of the cable
The self-cutting thread of the guiding heads is tight enough, even when the cable needs to be
pulled back.
04-2011
The different types of guiding heads can be used both for standard cables and wires in domestic
installation and for cables in underground as well.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
ef fective u
www.katimex.de
le &
fas t, simp
Product Overview
Cable Guide Heads
Cable guide head
Cable guide head
brass, self cutting thread
cable-Ø
11/15 mm Set
11 mm
15 mm
weight
art.-no.
50 g
15 g
25 g
101036
101056
101057
Cable guide head
Cable guide head
aluminium
cable-Ø
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
up to 22 mm
up to 30 mm
30-50 mm
weight
art.-no.
30 g
75 g
270 g
103169
103170
103171
Duct Pullers
rip
r a cable g
Pullers...
Innerduct there is no space fo
where
Spreaded Innerduct Pullers or Duct Pullers with self-cutting, conically formed thread offer a cheap
chance to renew pipes. They are available in a wide range of different diameters.
05-2011
An additional reliability is provided because you can use the Duct Puller with screw-in tapered thread
with or as well without integrated swivel.
www.katimex.de
Innerduct Pullers are typically used in “pipe-in-pipe” installation, in horizontal borings, with cable plows
and moles. Duct Pullers are installed quickly and require no special tooling.
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
Innerduct Pullers - for high pressure and polyethylene pipes .
Product Overview
Duct Puller
Duct Puller
Duct Puller with swivel
With chrome plated surface with a screw-in tapered thread to grip the inside diameter
of the duct. These Duct Pullers have a built in swivel head.
outside-Ø
duct-Ø
(mm)
min.
duct-Ø (mm)
max.
duct-Ø (mm)
weight
(kg)
art.-no.
31.8
41.3
44.4
54.0
32
40
50
63
23.9
32.0
37.6
48.5
29.2
36.6
42.2
52.8
0.30
0.35
0.70
0.85
107185
107186
107187
107188
(mm)
Duct Puller
Duct Puller chrome plated
With chrome plated surface with screw-in tapered thread
outside-Ø
duct-Ø
(mm)
min.
duct-Ø (mm)
max.
duct-Ø (mm)
weight
(kg)
art.-no.
29
35
45
51
64
25
32
40
50
63
18.3
25.4
31.8
38.1
50.8
23.6
30.0
36.3
42.7
55.4
0.25
0.36
0.64
0.91
1.50
107190
107191
107192
107193
107194
www.katimex.de
KATIMEX Cielker GmbH · Bahnhofstr. 50 · 54584 Jünkerath
Tel +49 (0) 65 97 92 77-0 · Fax +49 (0) 65 97 92 77-40 · eMail [email protected]
(mm)
Duct Puller
Duct Puller with clamping system
the most efficient way to allow the safe towing of polymer pipes into position
min.
max.
duct-Ø
weight
art.-no.
(mm)
(kg)
duct-Ø (mm)
duct-Ø (mm)
25
32
40
50
55
63
75
90
110
125
140
160
180
200
225
250
280
315
355
18
24
30
38
42
48
56
66
82
96
105
124
126
152
163
187
221
238
270
22
29
37
47
49
58
70
84
100
115
130
148
166
185
205
225
259
290
325
0.10
0.15
0.20
0.40
0.90
1.70
2.40
4.10
7.40
8.60
8.80
10.00
15.00
18.00
25.00
28.00
38.00
53.00
60.00
107325
107326
107327
107328
107329
107330
107331
107332
107333
107334
107335
107336
107337
107338
107339
107340
107341
107342
107343

Similar documents