Soldering, brazing, and welding technology

Transcription

Soldering, brazing, and
welding technology
SUPER FIRE 3 HEAVY-DUTY brazing equipment
147
SUPER FIRE 2, POWER FIRE, ROFIRE PIEZO PRO
148
ROFIRE cartridge soldering units
149
MAPP®
150
Disposable gas cartridges and accessories
151
Propane high-performance torches
152 – 154
Universal soft-soldering torches
155 – 157
Warming-up torch
Propane accessories
159 – 160
ALLGAS 2000 Universal soldering & welding equipment
161 – 163
Gas welding equipment
164 – 165
AIRAC® brazing equipment
6
Soldering, brazing, and welding accessories
ROTHERM 2000 electric soft-soldering unit
144
158
166
167 – 170
171
Soft solders & accessories
172 – 173
Hard solders
174 – 177
www.rothenberger.com
Soldering, brazing, and welding are the classical methods
for joining copper and steel
pipes.
With its professional equipment
for pipe fitters, ROTHENBERGER
ensures perfect soft and hardsoldered joints.
High-performance welding equipment is
ideal for sanitary, HVAC, and refrigeration
technicians.
ROTHENBERGER offers the essential
accessories for all soldering, brazing,
and welding activities. Thanks to more
than 25 years of experience in this area,
ROTHENBERGER stands for safety and
professionalism.
6
145
Systemised soldering, brazing, and welding technology
Application table
Soft soldering, warmingup, etc. up to 450 °C
Brazing, etc.
450 – 830 °C
Gas welding, etc.
above 830 °C
Basic
Hot
Max
Product listing according to application areas
Super Fire 3
Super Fire 2
AIRAC
TURBOPROP
AIRPROP
RE 17
ROXY KIT
Allgas 2000
POWER FIRE
ROFIRE PIEZO HANDY PRO
ROFIRE PIEZO PRO
ROCOLT HANDY PIEZO
Gas-fired soldering irons
ROMAXI PRO
Roofing set
ROFIRE 1800 °C
ROFIRE 1800 °C
ROFLAME PIEZO 1800 °C
6
ROTHERM 2000
Multi 300
Supergas
C200
Multi 300
Oxygen
Propane
ROGAS 2000
Maxi 400
MAPP ®
Acetylene
Oxygen
Oxy-acetylene
Product guidance system
Piezo ignition
Locking button
Economy valve
Blowback prevention
230 V supply
Hose
Rugged housing
Acetylene regulator
Rotatable 360°
Refilling adapter
Oxygen regulator
Bayonet coupling
Propane regulator
Handy
Threaded coupling
Soldering without gas
Transport trolley
Push-in coupling
Constant-pressure regulator
Sheet steel case
Arm support
On / Off switch
Fine regulation
Soldering without flame
146
“Mobile energy”
SUPER FIRE 3
Ergonomic HEAVY-DUTY brazing unit
Max
For soft soldering, brazing, and other applications.
NEW
●
●
Fast “Twist ‘n Load“ system:
Burner is exchanged with the flick of the wrist
(5 different burners available)
Tip with swirl flame:
Extremely high flame temperature
●
●
Elaborately manufactured
brass/steel design:
Long service life
●
High-performance piezo:
Reliable (up to 30,000 ignitions)
●
Only ignites if torch has been securely locked:
Dual safety
●
Fine regulating valve:
Precise flame adjustment
6
Ergonomically designed handle of
high-quality aluminium:
Robust and optimum handling
●
●
Non-return safety valve:
Blocks the gas flow in both
directions immediately
Locking button:
Even more convenience
for longer working
US thread 1” – 20
EU thread 7/16” – 28
Version
SUPER FIRE 3 Set Basic
Handle, cyclone burner 14 mm (No. 3.5457)
SUPER FIRE 3 Set MAPP® Basic
MAPP® gas cylinder (No. 3.5551-A)
SUPER FIRE 3 set MAPP® “All in one”
Cyclone burner 14 mm (No. 3.5457)
Pin-point burner 15 mm (No. 3.5455)
Universal torch support (No. 3.5461)
kg
No.
1.1
3.5436
2.3
3.5432
2.5
3.5437
Version
SUPER FIRE 3 Set Basic
SUPER FIRE 3 Set MAPP® Basic
Cylinder guard (No. 3.5462)
SUPER FIRE 3 set MAPP® “All in one”
Cyclone burner 14 mm (No. 3.5457)
Pin-point burner 15 mm (No. 3.5455)
Universal torch support (No. 3.5461)
Protective cap (No. 3.5462)
kg
No.
1.1
3.5431
2.3
3.5433
2.5
3.5439
147
“Mobile energy”
SUPER FIRE 2
HEAVY-DUTY brazing unit
Max
For soft & hard soldering, and other applications.
●
●
●
Piezo ignition
Immediate flame ignition at the push of a button
Fine regulating valve:
Integrated constant-pressure regulator:
Constant and even pressure at all temperatures
Version
SUPER FIRE 2
Burner (No. 3.5643), M300 safety
adapter (No. 3.5648)
SUPER FIRE 2 Set
Burner (No. 3.5643), M300 safety
adapter (No. 3.5648)
Hose adapter R3/8“L (No. 3.5647)
Multigas 300 (No. 3.5510)
Universal torch stand (No. 3.5622)
g
No.
640
3.5425
1,080
3.5650
POWER FIRE
PROFESSIONAL brazing unit
For soft & hard soldering, and other applications
● Piezo ignition:
● Locking button:
Continuous working
● Fine regulating valve:
● Integrated constant-pressure regulator:
Constant and even pressure at all temperatures
6
Version
POWER FIRE US coupling
POWER FIRE EU coupling
Max
g
No.
590
590
3.0811
3.0812
ROFIRE PIEZO PRO
SPECIAL soldering unit
For soft & hard soldering, and other applications
● Piezo ignition
● Working range 360°
Ideal for overhead working without warm-up time
Version
148
Hot
g
No.
ROFIRE PIEZO PRO 1,950° C Set
850
Burner (No. 3.5562), Rogas 2000 (No. 3.5540)
3.5560
“Mobile energy”
ROFIRE PIEZO
HANDY PRO
Hot
SPECIAL soldering unit
g
No.
1,100
3.5565
Version
ROFIRE PIEZO Handy Pro
Burner (No. 3.5566)
Fine regulating valve (No. 3.5723)
2m hose (No. 3.5724)
Rogas 2000 (No. 3.5540)
ROFIRE PIEZO 1950° C
ECONOMY soldering unit
● Integrated fine regulating valve
Precise burner flame adjustment
● Precise burner head with integrated support bracket
Optimum handling
Version
ROFIRE PIEZO 1950° C Set
Burner (No. 3.5556)
Multigas 300 (No. 3.5510)
Basic
g
No.
760
3.5429
6
ROFIRE 1800° C
ECONOMY soldering unit
Basic
● Integrated fine regulating valve
Precise burner flame adjustment
● Burner head with integrated support bracket
Optimum handling
Version
ROFIRE 1800° C Set
Burner (No. 3.5506), Multigas 300 (3.5510)
g
No.
760
3.5428
ROFLAME
PIEZO 1800° C
Basic
CLASSIC soldering unit
Version
ROFLAME PIEZO 1800° C
Burner
g
No.
750
3.5931
149
Disposable gas cartridges
MAPP® gas
NEW
Special gas mixture for demanding soldering / brazing work.
Flame temperatures up to 2400° C + 35 % faster than propane.
MAPP® monoblock aluminium
cylinder
MAPP® gas
Special recipe researched by
ROTHENBERGER
●
Specially developed
safety cylinder
Contains no BUTADIEN:
Poses no healthrisks
●
●
ROTHENBERGER MAPP® gas is produced in ultra-modern
filling plants and processor-controlled batching systems:
Guaranteed constant top burning performance
●
Special gas mixture with outstanding flame
characteristics:
Extreme flame temperatures, utmost
burner performance, and guaranteed
short working times
Less weight compared to conventional steel
cylinders (228 g empty weight):
Simple handling
6
●
●
TÜV-tested gas cylinder (drawn from solid material):
Increased safety for the user
Burns approx. 30% longer than propane:
Longer working time
Max
MAPP® is a registered tradename of Messer Griesheim GmbH, Frankfurt
US thread 1” – 20
EU thread 7/16” – 28
Version
Languages
MAPP gas cylinder
MAPP gas cylinder
MAPP gas cylinder
DE, GB, FR, ES, IT, PT
750 ml
DK, NL, SE, FI, FR, RU 750 ml
CZ, PL, HU, BG, TR, GR 750 ml
150
Contents
No.
3.5551-A
3.5551-B
3.5551-C
Version
Languages
Contents
MAPP gas cylinder
MAPP gas cylinder
MAPP gas cylinder
DE, GB, FR, ES, IT, PT
750 ml
DK, NL, SE, FI, FR, RU 750 ml
CZ, PL, HU, BG, TR, GR 750 ml
No.
3.5550-A
3.5550-B
3.5550-C
Disposable gas cartridges
Maxigas 400
High-performance welding, cutting, and brazing gas for flame temperatures up to 2200° C. Gas cartridge with 7/16" EU coupling
thread.
Description
Contents
g
No.
Maxigas 400
600 ml
460
3.5570
Hot
Rogas 2000
Professional high-performance gas for flame temperatures up to
2000° C. Gas cartridge with 7/16" EU coupling thread.
Max
Description
Contents
g
No.
Rogas 2000
360 ml
210
3.5540
Propane gas
Gas cartridge for flame temperatures up to 1900° C.
With EU coupling 7/16“
Description
Propane gas
6
Basic
Contents
No.
750 ml
3.5546-A
Multigas 300
Propane / butane gas mixture for flame temperatures up to
1900° C. Gas cartridge with 7/16" EU coupling thread.
Basic
Description
Contents
g
No.
Multigas 300
600 ml
450
3.5510
C 200 Supergas
Pierceable butane cartridge with propane contents, also for working
at low temperatures. Manufactured to EN 417.
Description
Contents
g
No.
C 200 Supergas
190 ml
290
3.5900
Basic
151
ROCOLT HANDY PIEZO Set
Professional brazing system with quick-change burner.
●
●
●
Standard burner 19 mm:
Soft soldering up to 32 mm
●
Rotatable hose coupling on the handle:
No hose twisting, working in any position.
●
Propane gas regulator with hose failure protection
Increased safety
“Twist 'n Load“ system:
Fast burner exchange without tools
Cyclone burner 19 mm:
Brazing up to 18 mm
Set consisting of: ROCOLT handle (No. 3.5395), Standard burner 19
mm (No. 3.5378), Cyclone burner (No. 3.5398), Pressure reducer
(No. 3.5356), Propane hose 3 m (No. 3.5383), Flame reflector 65 mm
(No. 3.1043), ROVLIES® (No. 4.5268), Plastic carrying case (No. 3.5355)
Description
6
Hot
Rocolt Handy Piezo
g
No.
1,500
3.5390
ROCOLT HANDY PIEZO
standard burner
Standard burner with extremely short, bundled flame for low
consumption. Ideal burner for brazing, soft soldering, warming up,
annealing, hardening, etc.
dia.
mm
14 mm
19 mm
25 mm
No.
3.5377
3.5378
3.5379
ROCOLT HANDY PIEZO
cyclone burner
Cyclone burner with optimum enveloping flame aspect when
soldering pipes and fittings. Ideal burner for brazing, soft soldering,
warming up, annealing, hardening, etc.
dia.
mm
14 mm
19 mm
25 mm
152
No.
3.5397
3.5398
3.5399
AIRPROP
Flame temperatures of 2200° C without oxygen. For soft soldering,
brazing, flame cleaning, shrinking, melting, etc.
●
Built-in gas turbine of brazing torches:
Bundled, concentrated, and hot flame
●
●
New, optimized valve technology
Absolutely gas-tight
Absolutely gas-tight connection thanks
to dual O-rings
●
Conventional threaded coupling M 14x1:
For mounting soldering irons and extensions
of the universal propane torch range
●
Prevents uncontrolled gas escape
Shut-off valve
●
Smooth-turning economy valve
Gas-saving working
Max
Set consisting of: Safety handle with push-in coupling (No. 3.1009),
Brazing burner with push-in nipple dia. 14mm (No. 3.1013) / dia. 16
mm (No. 3.1014) / dia. 19 mm (No. 3.1015), 2,5 m propane hose
with 3/8“L coupling (No. 3.2201), Safety spark igniter (No. 3.2077),
Replacement flints (No. 3.2079), Burner spanner (No. 3.2073), Sheet
steel case (No. 3.1005).
Version
AIRPROP brazing set without propane regulator
AIRPROP brazing set with propane regulator
As Set 3.1092 but with regulator
(No. 3.2081) (W 21,8L – R3/8L)
(No. 3.2083) (POL 7/8L – R3/8L)
(No. 3.2084) (W 20x14L – R3/8L)
g
No.
2,890
3,120
3.1092
3.1091
3,120
3.1104
3,120
3.1119
6
AIRPROP brazing set
AIRPROP brazing burner
AIRPROP brazing burner
with push-in nipple
with threaded M14x1 union nut coupling
Brazing burner with optimum enveloping flame aspect when soldering pipes and fittings.
Brazing burner with optimum enveloping flame aspect when soldering pipes and fittings.
L
dia.
mm
14
16
19
22
mm
mm
mm
mm
L
dia.
mm
g/h
2 bar
kWh – kcal – BTU
140
145
170
171
125
180
300
400
1.60
2.30
3.84
5.12
–
–
–
–
1,375
3,300
3,300
4,400
–
–
–
–
5,465
7,885
13,115
26,195
g
No.
mm
95
100
130
145
3.1013
3.1014
3.1015
3.1016
14
16
19
22
mm
mm
mm
mm
mm
g/h
2 bar
140
145
170
171
125
180
300
400
1.60
2.30
3.84
5.12
–
–
–
–
1,375
3,300
3,300
4,400
–
–
–
–
5,465
7,885
13,115
26,195
g
No.
95
100
130
145
3.0913
3.0914
3.0915
3.0916
153
AIRPROP Sets
Description
g
No.
Safety handle with M14x1 coupling
1,000
(No. 3.1989), brazing burner with threaded
coupling dia. 19 mm (No. 3.0915), 2,5 m propane
hose with 3/8“L coupling (No. 3.2201)
Safety handle with M14x1 coupling
1,000
coupling dia. 22 mm (No. 3.0916), 2,0m propane
hose with 3/8“L coupling (No. 3.0927)
3.1020
3.1022
AIRPROP set with quick-release coupling
Description
g
No.
AIRPROP set with quick-release coupling
1,100
Safety handle with push-in coupling
(No. 3.1009), brazing burner with push-in nipple
dia. 14 mm (No. 3.1013) / dia. 22 mm
(No. 3.1016), 2,0 m propane hose with
3/8“L coupling (No. 3.0927)
3.1030
TURBOPROP
6
With performance features of the AIRPROP handles. Flame temperatures of 2200° C without oxygen. For soft soldering, brazing, flame
cleaning, shrinking, melting, etc.
●
●
4 to 5-fold flame twist for better
turbulence of the gas mixture:
Higher flame temperature
Absolutely gas-tight connection
thanks to dual O-rings
●
●
New, optimized valve technology
●
Prevents uncontrolled gas escape
Shut-off valve
Gas-saving working
Max
TURBOPROP Sets
Set consisting of: Safety handle with push-in coupling (No. 3.1009),
Brazing burner with push-in nipple dia. 12 (No. 3.1032) / dia. 15
mm (No. 3.1033) / dia. 18 mm (No. 3.1034), 2,5 m propane hose
with 3/8“L coupling (No. 3.2201), Safety spark igniter (No. 3.2077),
Replacement flints (No. 3.2079), Burner spanner (No. 3.2073), Sheet
steel case (No. 3.1005).
Description
TURBOPROP Set without propane regulator
TURBOPROP Set with propane regulator
(No. 3.2081) (W 21.8L – R3/8L)
(No. 3.2083) (POL 7/8L – R3/8L)
(No. 3.2084) (W 20x14L – R3/8L)
154
g
No.
2,870
3,120
3.1090
3.1094
3,120
3.1037
3,120
3.1036
TURBOPROP brazing burner
with push-in nipple
Stainless steel burner with extremely short, bundled flame for low
consumption.
L
dia.
mm
mm
g/h
2 bar
165
175
195
230
270
70
110
180
240
450
1.89
1.41
2.30
3.07
5.75
g
No.
70
90
110
160
230
3.1031
3.1032
3.1033
3.1034
3.1035
g
No.
TURBOPROP Set
1,000
Safety handle with M 14x1 coupling
coupling dia. 18 mm (No. 3.1034), 2.0 m
propane hose with 3/8“L coupling (No. 3.0927)
3.1025
10
12
15
18
24
mm
mm
mm
mm
mm
–
–
–
–
–
770 – 3,050
1,210 – 4,815
1,980 – 7,855
2,640 – 10,485
4,950 – 19,640
TURBOPROP Set
Description
MULTI 300 PROPANE soft-soldering kit
6
For soft soldering, tinning, warming up, flame cleaning, etc.
Basic
No. 3.5488
Set consisting of: Soft soldering iron with 350 g copper head, flat
(No. 52.0849), Soft soldering burner dia. 17 mm (No. 52.0856) /
dia. 20 mm (No. 52.0857), Wide burner 45 mm (No. 52.0845),
Propane regulator 0-6 bar (No. 3.2082), 2 m propane hose (No.
3.0927), Small propane cylinder 0.5 kg with hook (No. 3.3079),
Re-filling adapter (No. 3.2207), Burner spanner (No. 3.5530), Openended spanner (No. 3.2073), Safety spark igniter (No. 3.2077),
Replacement flints (No. 3.2079), Sheet steel case (No. 3.5487)
Description
MULTI 300 / Kit B
g
No.
9,000
3.5488
Set consisting of: Soft soldering iron with 350 g copper head, flat
(No. 52.0849), 2 m propane hose (No.3.0927), Small propane cylinder 0.5 kg with hook (No. 3.3079)
Description
MULTI 300 / Kit A without propane regulator
MULTI 300 / Kit A with propane regulator (No. 3.2082)
g
No. 3.5489
No.
4,100 3.5486
4,340 3.5489
155
MULTI 300
Soft-soldering iron
No. 52.0849
Description
No. 52.0865
No. 52.0850
No. 52.0867
No. 52.0866
g
No.
With handle, soldering iron burner, iron holder, 940
Wind breaker, 350 g copper head, flat
With handle, soldering iron burner, and iron holder 570
and wind breaker, without copper head
Handle with M 10 x 1 L hose coupling
300
Soldering iron burner with M 15 x 1 coupling
70
Iron holder with foot
100
Wind breaker
100
Sheet steel case
3,390
Burner spanner
60
52.0849
52.0840
52.0850
52.0865
52.0866
52.0867
3.5487
3.5530
MULTI 300
Soft-soldering burner/wide burner
dia.
Description
Size
Soft-soldering burner Size 3
Size 5
Size 7
Wide burner 45 mm
mm
Coupling
12
17
20
M
M
M
M
15x1
15x1
15x1
15x1
g
No.
50
70
120
120
52.0855
52.0856
52.0857
52.0845
6
COPPER HEADS
Made of cathode copper
Version
250 g pointed
350 g pointed
g
270
370
Version
250 g flat
350 g flat
No.
3.2099
3.2076
g
No.
270
370
3.2098
3.2075
PROPANE UNIVERSAL burner
Description
g
No.
Propane universal burner
1,100
3.3334
Safety handle with M 14x1 coupling (No. 3.1989),
Standard propane burner with threaded coupling dia. 22 mm,
2.5 m propane hose with 3/8“L coupling (No. 3.2201)
156
GAS-FIRED soldering iron
PROFESSIONAL soldering iron for highest demands. Extremely
robust and long life, with small dimensions. Ideal for soft soldering
corners, edges, joints, and channels. Excellent ignition behaviour
with concentrated, stable flame. Heats up quickly.
●
●
●
Handle shell of special plastic, glassfiber reinforced
Impact-resistant
Gas-saving combustion chamber.
Wind breaker
●
●
Support for gas-fired
soldering iron
Safe Operation
Special coupling:
Suitable for flat & pointed copper heads
Hot
Description
g
No.
Gas-fired soldering irons
740
Gas-fired soldering iron (No. 3.2048)
Copper head, 350 g, flat (No. 3.2042)
Gas-fired soldering iron set
1,030
Safety handle with M 14 x 1 coupling
(No. 3.1989), gas-fired soldering iron (No. 3.2048),
Copper head, 350 g, flat (No. 3.2042)
Gas-fired soldering iron set
1,380
Safety handle with M M14 x 1 coupling
(No. 3.1989), gas-fired soldering iron
(No. 3.2048), copper head, 350 g, flat
(No. 3.2042), 2.5 m propane hose (No. 3.2201)
Gas-fired soldering iron - set in a case
5,700
Safety handle with M 14 x 1 coupling
(No. 3.1989), gas-fired soldering iron
(No. 3.2048), copper head, 350 g, flat (No. 3.2042),
2.5 m propane hose (No. 3.2201), Open-ended spanner
(No. 3.2073), Safety spark igniter (No. 3.2077),
Replacement flints (No. 3.2079), propane regulator
(No. 3.2082), Re-filling adapter (No. 3.2207), Small
propane cylinder 0,5 kg (No. 3.3079), Burner spanner
(3.5530), Sheet steel case (No. 3.5487)
3.2040
6
3.2030
3.2029
3.2025
No. 3.2025
SPECIAL COPPER HEADS
Made of cathode copper for gas-fired soldering irons.
Version
250
350
450
350
g
g
g
g
flat
flat
flat
pointed
g
No.
250
350
450
350
3.2041
3.2042
3.2043
3.2044
No. 3.2043
No. 3.2042
No. 3.2041
No. 3.2044
157
Warming-up torches
ROMAXI PRO
PROFESSIONAL warming-up burner with 60 mm dia.
high-performance burner head.
Description
Romaxi Pro warming-up burner
60 mm high-performance burner head,
Safety handle with long lever,
Arm support, 5 m propane hose
Propane regulator, hose failure protection
Hot
g
No.
1,200
3.0020
ROOFING SET
Propane warming-up torch with 60 mm dia. high-performance burner.
Description
6
Roofing set
Propane handle (No. 3.0910D), 60 mm
High-performance burner head (No. 3.2163)
600 mm burner tube (No. 3.2160)
5.0 m propane hose (No. 3.2203)
Burner support (No. 3.2213)
Burner support
Hot
g
No.
1,920
3.0954E
60
3.2213
Extensions
Special tube, chrome plated, angled 40°, inlet M 14 x 1,
outlet M 20 x 1.
L mm
Buckling-resistant coupling on handle,
with extra-long union nut
No. 3.2016
60
100
200
350
600
750
g
No.
80
90
120
190
290
470
3.2105
3.2110
3.2120
3.2135
3.2160
3.2175
Forked head
Special tube, chrome plated, 2 arms, for connecting two burners.
L
Description
mm
Forked head 80
Width
mm
Coupling
inlet
Coupling
outlet
g
No.
115
M 20x1
M 20x1
95
3.2016
Warming-up burner heads
High-efficiency burner heads with flame stabilisers, made of special
chrome plated steel, reinforced edge. For warming up, shrinking,
insulating, hardening, general repair work, etc. Threaded M20x1
coupling.
158
L
dia.
mm
mm
g/h
2 bar
45
51
57
63
102
112
126
138
2,500
3,800
5,500
6,700
32.00
48.60
70.35
85.70
–
–
–
–
27,500
41,800
60,500
73,700
–
–
–
–
109,280
165,970
240,257
292,670
g
240
270
350
440
No.
3.2045
3.2051
3.2057
3.2063
Accessories for propane
FLAME REFLECTORS
●
●
For pipe soldering, mounts onto burner:
Protection of surrounding materials
More even warming of the pipe:
Better heat utilisation, saves time and energy, made of
high-quality stainless steel
Type
Width
mm
Mounting dia.
mm
g
65
65
8 – 15
15 – 22
100
100
65 / 15
65 / 24
No.
3.1042
3.1043
SAFETY PROPANE HANDLES
With economy, regulating, and shut-off valves, hose coupling R 3/8” L.
No. 3.1009
Description/Version
g
Safety handle with push-in coupling
Safety handle with M 14x1 coupling
Repair kit with shut-off valve, complete
Repair kit for regulating valve, complete
Repair kit for economy valve, complete
No.
350
290
10
10
10
3.1009
3.1989
3.0101
3.0102
3.0103
6
No. 3.1989
Propane regulator
286 mm brass, for 0.5 kg, 5 kg and 11 kg cylinders.
No. 3.2082
Inlet
Outlet
W 21,8 x 1/14“
R 3/8” L
POL 7/8“ L
POL 7/8“ L
W 20 x 14 L
LR
R
R
R
R
3/8”
3/8”
3/8”
3/8”
3/8”
L
L
L
L
L
Working
pressure
bar
Consumption
kg/h
0.5-4.0
0.5-4.0
1.0-6.0
1.0-6.0
1.0-6.0
8
8
10
10
10
g
No. 3.2084
No. 3.2081E
No.
240 3.2081E
200 3.2082
270 3.2083
280 3.2083Y
230 3.2084
No. 3.2083
with metal seal
No. 3.2083Y
with plastic seal
PROPANE hoses
Top quality, tested to DIN/DVGW, with strong inlay, durable
and flexible, mounted with sleeves and nuts or on 40 m roll
without couplings, available in medium (DK 6) or high-pressure
(DK 30) versions.
L
m
2
2.5
5
10
Inlet
R
R
R
R
3/8”
3/8”
3/8”
3/8”
Outlet
L
L
L
L
M 10 x1 L
R 3/8” L
R 3/8” L
R 3/8” L
Pressure Inner dia. mm
class Wall thickness
DK 6
DK 6
DK 30
DK 30
4.0
4.0
4.0
6.3
x
x
x
x
3.5
3.5
4.0
5.0
No. 3.2223
No. 3.0927
g
310
350
730
1,650
No.
3.0927
3.2201
3.3310
3.2223
159
Accessories for propane
Refilling adapter
For re-filling 0.5 kg propane cylinders from 3.5 or 11 kg propane
cylinders, brass with guide pin.
No. 3.2207
Description
Version
W 21.8 x 1/14” L
Outlet
g
No.
R 3/8” L
160
3.2207
Propane hose failure protection
Nominal pressure 1.5 – 4 bar, brass, tested to DIN / DVGW.
No. 3.2080
Automatic interruption of gas supply if hose is damaged or loosened, push-button for resetting after an interruption.
Inlet
No. 3.5925
W 21.8 x 1/14” L
R 3/8” L
Outlet
Consumption Pressure
kg/h
class
R 3/8” L
R 3/8” L
10
10
blue
blue
g
220
130
No.
3.2080
3.5925
Propane constant-pressure regulator
Adjusted to 4.0 bar, for connecting to 5 and 11 kg cylinders.
6
Inlet
Outlet
Consumption
kg/h
g
R 3/8” L
8
230
No.
No. 3.0925
W 21.8 x 1/14“ L
3.0925
Propane regulator
with pressure gauge
Adjustable from 0.5 – 4 bar, for connection to 5 and 11 kg cylinders.
No. 3.2100
Inlet
W 21.8 x 1/14” L
Outlet
Consumption
kg/h
g
R 3/8” L
10
270
No.
3.2100
Propane lightweight steel cylinder
With cylinder valve, TÜV-tested according to TRG.
Description
Version
Protective bracket included
with 0,5 kg cylinder
160
Outlet Contents
kg
Small cylinder, 0.5 kg with foot R 3/8” empty 2.75
Cylinder 5 kg, with foot and cap R 3/8” filled 12.6
Collar
No.
3.3079
3.1081
3.5636
Mobile gas-welding equipment
ALLGAS 2000
Handle
Ideal mobile soldering & welding torch for plumbers, HVAC fitters,
refrigeration technicians, automotive workshops, and tinsmiths.
Performance features
For soldering, brazing, and warming up.
● Soldering range: up to 2.5 mm wall thickness
● Brazing range: 0.2 – 5 mm
●
Universal soldering & brazing torch:
Suitable for use with all conventional
gases and cylinder oxygen
●
Low gas pressure of only 0.2 bar:
Practically complete emptying of gas
cylinders (cost-saving)
Suitable for use with:
●
●
●
●
Oxy-acetylene
Propane and oxygen
CNG and oxygen
Town gas and oxygen
6
Max
●
Description
Version
Coupling
oxygen
Handle ALLGAS 2000
R 1/4”
Mixing nozzle with union nut
Coupling
fuel gas
g
R 3/8” L
40
280
No.
Small, very light handle (280 g):
Extra compact for working in tight spaces
3.5303
3.5304
ALLGAS 2000 Set
Set consisting of: Handle (No. 3.5303), Mixing nozzle with union nut
(No. 3.5304), 5 welding tips dia. 0.2 mm (No. 3.5305) / dia. 1 – 2 mm
(No. 3.5306) / dia. 2 – 3 mm (No. 3.5307) / dia. 3 – 4 mm (No. 3.5308)
/ dia. 4 – 5.0 mm (No. 3.5309), Pipe welding tips Size 1 (No. 3.5313) /
Size 2 (No. 3.5314), Coupling nut SW 14 (No. 3.5315), Dispersion
nozzle (No. 3.5311), 2.5 m dual-hose package (No. 3.5221), Openended spanner SW 14 x 19 mm (No. 3.2073), Welding tip holder /
spanner (No. 3.5312), Safety spark igniter (No. 3.2077), Replacement
flints (No. 3.2079), Sheet steel case (No. 3.5319)
Description
Allgas 2000 Set in sheet steel case
g
No.
3,100 g
3.5300
161
Accessories for gas-welding equipment
ALLGAS 2000 welding tips
Welding tips
No. 3.5304
No. 3.5312
No. 3.5311
Size
Brazing range mm
Size 1
0.2 - 1.0
Size 2
1.0 - 2.0
Size 3
2.0 - 3.0
Size 4
3.0 - 4.0
Size 5
4.0 - 5.0
Dispersion nozzle for warming up
Welding tip holder, can be used as a spanner
g
No.
10
10
10
10
10
20
20
3.5305
3.5306
3.5307
3.5308
3.5309
3.5311
3.5312
Pipe-welding tips, flexible
Size
Brazing range mm
Size 1
2.0 - 3.0
Size 2
4.0 - 5.0
Coupling / union nut, SW 14
6
g
No.
40
40
10
3.5313
3.5314
3.5315
ALLGAS 2000 PS 0,5/2 COMPACT
Fitter's brazing equipment in sheet steel case.
For brazing iron, steel, sheet steel, pipes, and non-ferrous metals.
Set consisting of: Handle Allgas 2000 (No. 3.5303), 2.5 m propane
hose (No. 3.2201), 2.5 m oxygen hose (No. 3.5210), Propane regulator, adjustable 0-6 bar (No. 3.2082), Oxygen pressure reducer 10
bar (No. 3.5634), Mixing nozzle with union nut (No. 3.5304),
Welding tips 0.2-1 mm (No. 3.5305) / 1-2 mm (No. 3.5306) / 2-3
mm (No. 3.5307) / 3-4 mm (No. 3.5308) / 4-5 mm (No. 3.5309),
Pipe welding tip, flexible, Size 1 (No. 3.5313) / Size 2 (No. 3.5314),
Dispersion nozzle (No. 3.5311), Welding tip holder / spanner
(No. 3.5312), Multi-size spanner (No. 3.5738), Safety spark igniter
(No. 3.2077), Replacement flints (No. 3.2078), Nylon safety goggles
(No. 54.0620), Small propane cylinder 0.5 kg (empty) (No. 3.3079),
Steel oxygen cylinder 2.0 l (filled) (No. 3.5635), Carrying frame
(No. 3.5629).
Complies with the Transport Regulations
acc. to UVV VBG 21, GGVS, and TRG 280.
Max
162
Description
Allgas 2000 PS 0,5 / 2 Compact
Carrying frame without accessories
kg
No.
21.4
10.3
3.5655
3.5629
Mobile brazing equipment
ALLGAS 2000 PS 0,5 / 2
Portable fitter's brazing equipment
For brazing iron, steel, sheet steel, pipes, and non-ferrous metals.
Set consisting of: Handle Allgas 2000 (No. 3.5303), 2.5 m propane
hose (No. 3.2201), 2,5 m oxygen hose (No. 3.5210), Propane regulator, adjustable 0-6 bar (No. 3.2082), Oxygen pressure reducer 10
bar (No. 3.5634), Mixing nozzle with union nut (No. 3.5304),
Welding tips 0.2-1 mm (No. 3.5305) / 1-2 mm (No. 3.5306) / 2-3
mm (No. 3.5307) / 3-4 mm (No. 3.5308) / 4–5 mm (No. 3.5309),
Welding tip holder / spanner (No. 3.5312), Multi-size spanner
(No. 3.5738), Safety spark igniter (No. 3.2077), Replacement flints
(No. 3.2078), Small propane cylinder 0.5 kg (empty) (No. 3.3079),
Steel oxygen cylinder 2.0 l (filled) (No. 3.5635), Carrying frame
(No. 3.5629).
Description
Allgas 2000 PS 0,5/2
kg
No.
14.4
3.5651
Max
Cylinder colours as shown
are noncommittal.
ALLGAS 2000 AS 5/5
Assembly, welding, and brazing equipment, portable
and mobile.
For brazing and welding of iron, steel, sheet steel, pipes, and nonferrous metals.
Set consisting of: Handle Allgas 2000 (No. 3.5303), 5 m dual-hose
package A/S (No. 3.5222), Acetylene pressure reducer 1.5 bar
(No. 3.5794), Oxygen pressure reducer 10 bar (No. 3.5634), 2 each
protective rubber caps, red (No. 51.1482) Mixing nozzle with union
nut (No. 3.5304), Welding tips 0.2-1 mm (No. 3.5305) / 1-2 mm
(No. 3.5306) / 2-3 mm (No. 3.5307) / 3-4 mm (No. 3.5308) / 4–5
mm (No. 3.5309), Welding tip holder / spanner (No. 3.5312), Burner
spanner (No. 51.0106), Safety spark igniter (No. 3.2077),
Replacement flints (No. 3.2078), Steel acetylene cylinder 5 l (filled)
(No. 3.5178), Steel oxygen cylinder 5 l (filled) (No. 3.5188), Sheet
steel case (No. 3.5319), Dual-telescoping transport trolley
(No. 3.5354).
Description
Allgas 2000 AS 5/5
kg
6
No.
45.0
3.5362
Max
Cylinder colours as shown are
noncommittal.
Max
Cylinder colours as shown are
noncommittal.
ROXY 400L
Standard gas-welding equipment for flame
temperatures up to 3100° C.
Handle with fine regulating valve (No. 3.5580), Maxigas 400
(No. 3.5570), Oxygen cylinder 2,0 l (No. 3.5635), Fine regulating
valve (No. 3.5723), Oxygen pressure reducer to DIN 0-315/200 bar
0-16/10 bar (No. 3.5634), Oxygen hose (No. 3.5410), Propane hose
(No. 3.5525), Oxygen blowback protection (No. 3.5678), Gas blowback protection (No. 3.5691), Mixing nozzle with union nut
(No. 3.5587), High-performance tips 1.5 mm (No. 3.5422) / 2.0 mm
(No. 3.5423), Micro-tips 0.3 mm (No. 3.5712) / 0.5 mm (No.
3.5696) / 0.7 mm (No. 3.5713), Micro-tip adapter (No. 3.5585),
Welding goggles A5 (No. 3.5621), Safety spark igniter (No. 3.2077),
Burner spanner (No. 3.5738), Carrying frame (No. 3.5727).
Description
Roxy 400 L
kg
10.8
No.
3.5780
163
Gas-welding equipment
RE 17 UNIVERSAL KIT
For welding, cutting, brazing, and warming up.
Welding range: 0.5 – 14 mm, cutting range: 3 – 100 mm.
Set consisting of: Handle with coupling nut (No. 3.5324), Welding
tips 2-4 mm (No. 3.5327) / 4-6 mm (No. 3.5328) / 6-9 mm
(No. 3.5329), Pipe-welding tips 2-4 mm (No. 3.5347) / 4-6 mm
(No. 3.5348), Wing-lever cutting attachment (No. 3.5338), Cutting
tip 3-25 mm (No. 3.5341), Heating nozzle 3-100 mm (No. 3.5339),
10-piece nozzle-cleaning set (No. 51.0105), Burner spanner
(No. 3.2079), Sheet steel case (No. 3.5800).
Description
No. 3.5480
No. 3.5324
RE 17 pipe-welding kit
RE 17 universal kit
As kit (No. 3.5479), but also including
Welding tips 0.5-1 mm (No. 3.5325) /
1-2 mm (No. 3.5326), Cutting tips 25-50 mm
(No. 3.5341) / 25-50 mm (No. 3.5344)
Sheet steel case RE 17 (empty)
Max
No.
4.3
4.8
3.5479
3.5480
1.7
3.5800
RE 17 Handle
Version
6
kg
with burner coupling nut
Coupling
Coupling
oxygen
fuel gas
g
R 1/4“
R 3/8” L
470
No.
3.5324
RE 17 welding tips
Welding range
mm
0.5 - 1
1-2
2-4
6-9
9 - 14
14 - 20
No.
g
140
150
170
220
260
280
3.5325
3.5326
3.5334
3.5329
3.5334
3.5335
RE 17 pipe-welding tips, flexible
Pipe-welding tips
Welding range mm
1-2
2-4
4-6
g
No.
40
40
50
3.5475
3.5476
3.5477
g
No.
130
140
150
3.5346
3.5347
3.5348
Flexible copper tip
Welding range mm
1-2
2-4
4-6
164
Gas-welding equipment
RE 17 wing-lever cutting attachment
Description
g
Cutting attachment without tips
No.
820
No. 3.5338
3.5338
RE 17 cutting tips and heating nozzle
Description
Version
Cutting tip
Cutting tip
Cutting tip
Heating nozzle
Cutting range
mm
3
25
50
3
–
–
–
–
25
50
100
100
g
No. 3.5341 - 3.5345
No.
10
20
20
50
No. 3.5339
3.5341
3.5344
3.5345
3.5339
RE 17 UNIVERSAL THREE-GAS SYSTEM
AMS 5/5
Assembly, welding, cutting, and brazing system
Welding range 0.5-14 mm, Cutting range 3.0-50 mm
tips 0.5-1 mm (No. 3.5325) / 1-2 mm (No. 3.5326) / 2-4 mm
(No. 3.5327) / 4-6 mm (No. 3.5328) / 6-9 mm (No. 3.5329) / 9-14
mm (No. 3.5334), Wing-lever cutting attachment (No. 3.5338),
Cutting tip 3-25 mm (No. 3.5341) / 25-50 mm (No. 3.5344),
Heating nozzle 3-100 mm (No. 3.5339), 5 m dual-hose package A/S
(No. 3.5222), Acetylene pressure reducer 1.5 bar (No. 3.5794),
Oxygen pressure reducer 10 bar (No. 3.5634), 2 each protective
rubber caps, red (No. 51.1428) / blue (No. 51.1427), 10-piece nozzle-cleaning set (No. 51.0105), Burner spanner (No. 51.0106), Safety
spark igniter (No. 3.2077), Replacement flints (No. 3.2079), Steel
acetylene cylinder 10 l (filled) (No. 3.5178), Steel oxygen cylinder 10
l (filled) (No. 3.5188), Maxigas 400 (No. 3.5570), Gas regulating
valve Maxigas (No. 3.5723), Hose adapter Maxigas (No. 3.5491),
Sheet steel case (No. 3.5800), Dual-telescoping transport trolley
(No. 3.5354).
Description
RE 17 universal three-gas system AMS 5/5
kg
50.0
6
No.
3.5400
Max
Cylinder colours as shown are noncommittal.
Max
Cylinder colours as shown are noncommittal.
RE 17 UNIVERSAL THREE-GAS SYSTEM
AMS 10/10
Assembly, welding, cutting, and brazing
Welding range: 0.5-14 mm, Cutting range: 3.0-50 mm
tips 0.5-1 mm (No. 3.5325) / 1-2 mm (No. 3.5326) / 2-4 mm
(No. 3.5327) / 4-6 mm (No. 3.5328) / 6-9 mm (No. 3.5329) / 9-14
mm (No. 3.5334), Wing-lever cutting attachment (No. 3.5338),
Cutting tip 3-25 mm (No. 3.5341) / 25-50 mm (No. 3.5344),
Heating nozzle 3-100 mm (No. 3.5339), 5 m dual-hose package A/S
(No. 3.5222), Acetylene pressure reducer 1.5 bar (No. 3.5794),
Oxygen pressure reducer 10 bar (No. 3.5634), 2 each protective
rubber caps, red (No. 51.1428) / blue (No. 51.1427), 10-piece nozzle-cleaning set (No. 51.0105), Burner spanner (No. 51.0106), Safety
spark igniter (No. 3.2077), Replacement flints (No. 3.2079), Steel
acetylene cylinder 10 l (filled) (No. 3.5179), Steel oxygen cylinder 10
l (filled) (No. 3.5189), Maxigas 400 (No. 3.5570), Gas regulating
valve Maxigas (No. 3.5723), Hose adapter Maxigas (No. 3.5491),
Sheet steel case (No. 3.5800), Dual-telescoping transport trolley
(No. 3.5354).
Description
RE 17 universal three-gas system AMS 10/10
kg
66.0
No.
3.5401
165
Acetylene brazing equipment
AIRAC®
Acetylene brazing torch
High-performance injection burner for “only” acetylene, for brazing/warming up of copper and steel pipes up to 60 mm dia..
Due to the special construction of the burner, oxygen from the surrounding air is fed to the burner at atmospheric pressure with acetylene, producing a flame temperature of 2350° C with a concentrated, pointed flame for precise and fast working.
Scale build-up at the heated surface is prevented by the nitrogen
introduced into the air flow (shielding gas effect).
●
Turbine and combustion chamber
effect, self-induced air:
Maximum performance
●
●
Shut-off valve:
Prevents uncontrolled escape of gas
High-performance injection burner
only for acetylene, 2350° C:
Powerful working
Max
●
Smooth-turning economy valve:
Gas-saving working
AIRAC® BRAZING SET
Set consisting of: Safety handle (No. 3.4991), Brazing burner Size 1
(No. 3.5021) / Size 2 (No. 3.5022) / Size 3 (No. 3.5023) / Size 4
(No. 3.5024) / Size 5 (No. 3.5025), 2.5 m acetylene hose (No. 3.5203),
Bend with nut 150 mm (No. 3.5110), Burner spanner 14x19 mm
(No. 3.2079), Sheet steel case (No. 3.5005).
6
Version
AIRAC brazing set in sheet steel case
kg
2.9
No.
3.1093
AIRAC® SAFETY HANDLE
Safety handle with economy, regulating, and shut-off
valves, threaded coupling M 16 x 1, hose coupling R
3/8“ L
Version
Safety handle
Repair kit for shut-off valve, complete
Repair kit for regulating valve, complete
Repair kit for economy valve, complete
g
290
10
10
10
No.
3.4991
3.0101
3.0102
3.0103
AIRAC® BRAZING BURNERS
Made of surface-treated brass, stable, concentrated
flame.
Version
Bend with nut, 150 mm
Size 1
Size 2
Size 3
Size 4
Size 5
166
g
80
30
40
50
70
80
No.
3.5110
3.5021
3.5022
3.5023
3.5024
3.5025
Accessories for gas welding
Oxy-acetylene hoses
Top quality to DIN 8541, with strong inlay, durable and flexible,
rubber, mounted with sleeves and nuts.
Oxygen hoses
L
Internal dia. x wall thickness
mm
kg
m
Inlet
Outlet
5
10
R 1/4”
R 1/4”
R 1/4”
R 1/4”
6.0 x 3.5
6.0 x 3.5
No.
1.1
1.9
3.3311
3.3314
Internal dia. x wall thickness
mm
kg
No.
Acetylene hoses
L
m
2.5
5
10
Inlet
Outlet
R 3/8”
R 3/8”
R 3/8”
R 3/8”L
R 3/8”L
R 3/8”L
6.0 x 3.5
6.0 x 3.5
6.0 x 3.5
0.5
1.1
1.9
3.5203
3.3312
3.3315
Coupling Internal dia. x wall thickness
outlet
Oxygen / Acetylene
kg
No.
R
R
R
R
0.9
2.0
3.8
9.1
3.5221
3.5222
3.5223
3.5230
Dual hoses A/S
L
m
2.5
5
10
40
Coupling
oxygen
R
R
R
R
1/4”
1/4”
1/4”
1/4”
3/8”L
3/8”L
3/8”L
3/8”L
6.0
6.0
6.0
6.0
x
x
x
x
3.5
3.5
3.5
3.5
40 m hose without sleeves or nuts
Lightweight steel cylinders, filled
with cylinder valve, base and cap, from 5 l, TÜV-tested in
accordance with TRGI.
Version
Steel cylinders without
cap, protective bracket
supplied
Cylinder colours as
shown are noncommittal.
Oxygen
Oxygen
Oxygen
Oxygen
Acetylene
Acetylene
Filling pressure Height
Contents
bar
mm
0.67 l
2l
5l
10 l
5l
10 l
200
200
200
200
18
18
400
420
595
980
595
980
dia.
mm
kg
80
110
145
145
145
145
2.5
4.6
14.0
17.0
13.0
23.0
No.
3.5736
3.5635
3.5188
3.5189
3.5178
3.5179
Cylinder transport trolley
Portable and mobile, for 5 and 10 l acetylene/oxygen cylinder, 0.5
kg and 5 kg propane cylinders can be used with conversion kit
(special accessory), coupling for disposable MAXIGAS 400
cartridges, dual-telescoping for different cylinder heights, brackets
for ALLGAS and RE 17 sheet steel cases.
Version
Transport trolley
5/10 l acetylene/oxygen cylinders
kg
8.9
No.
3.5354
167
6
Accessories
Cylinder pressure reducer
Rugged pressed brass construction with large pressure gauge to DIN
8549 (dia. 63 mm), with shut-off and safety valves, one-stage
design to DIN 8546, with test mark.
No. 3.5634
No. 3.5794
Cylinder contents Working pressure
bar
bar
Inlet
Outlet
kg
No.
Oxygen
0 - 315/200
0 - 16/10
R 3/4”
R 1/4”
1.4
3.5634
Acetylene
0 - 40
0 - 2.5/1.5
R 3/4”
R 3/8“ L
1.6
3.5794
Blowback prevention
Torch-mounted flashback arrestors, type-tested, with flame trap,
flow lock, non-return valve, and dirt filter.
max operating
pressure
Coupling
thread
g
Handle-mounted, oxygen
20 bar
Handle-mounted, acetylene 1.5 bar
Reducer-mounted, oxygen 20 bar
Reducer-mounted, acetylene 1.5 bar
R 1/4”
R 3/8” L
R 1/4”
R 3/8” L
190
190
190
190
Version
No. 54.0360
No.54.0365
No. 54.0320
No. 54.0321
No.
54.0320
54.0321
54.0360
54.0365
Protective guard for pressure reducer
Impact protection, rugged steel construction, mounts on connecting
couplings.
6
No. 3.5146
Version
Colour
For oxygen pressure reducer
For acetylene pressure reducer
blue
yellow
g
820
820
No.
3.5146
3.5140
Protective rubber cap
No. 3.5140
With slot, open.
Version
No. 51.1428
For oxygen pressure reducer
For acetylene pressure reducer
No. 51.1427
Colour
blue
red
g
50
50
No.
51.1427
51.1428
Oxygen refilling bend
Version
max. 200 bar, cylinder coupling R 3/4“
g
360
No.
3.5199
Safety igniter
Powerful spark, wear-free hard alloy friction surface.
Description / Version
g
No.
No. 3.2078
No. 3.2077
No. 3.2079
Safety lighter with friction roller
Container with 3 replacement flints
Container with 6 replacement flints
60
10
15
3.2077
3.2079
3.2078
Stirrup lighter
Description / Version
Stirrup lighter, with friction roller and flint stone 50
Replacement flints 3x20 mm
10
168
g
No.
54.0800
54.0801
Accessories
Hand-held welding mirror
Version
Steel wire handle with clamp/ball joint
Replacement mirror of steel
g
No.
280
50
54.0850
54.0851
No. 54.0850
Magnetic welding mirror
Version
With flexible metal tube/ball joint
Replacement mirror of steel
g
No.
450
50
54.0855
54.0851
g
No.
20
51.0105
g
No.
210
51.0106
No. 54.0855
Nozzle cleaner
Version
10-piece, in folding case
Burner spanner
Version
11 mm AF
Soldering flux and container for
hydrochloric acid
Version
With screw cap retaining band
6
g
No.
40
53.0250
g
No.
15
53.0310
g
No.
30
56.1550
Soldering stone
Version
LxWxH
Pressed
65 x 45 x 40 mm
Soapstone marker
Version
White, heat-resistant
LxWxH
65 x 45 x 40 mm
Welding goggles
With athermal glasses to DIN
Version
Nylon safety goggles
Glass
A4
A5
clear, non-splintering
Replacement glasses (pair)
A4
A5
clear, non-splintering
Screw-ring safety goggles
A4
A5
Replacement glass (50 mm dia.)
A4
A5
g
No.
60
60
60
30
10
30
90
90
30
10
54.0620
54.0621
54.0622
54.0625
54.0626
54.0627
54.0640
54.0641
54.0675
54.0676
No. 54.0622
No. 54.0620
No. 54.0640
169
Accessories
ROVLIES® cleaning pads
Non-metal, for fast, score-free cleaning of copper pipe soldering
surfaces.
● No metal abrasion:
Reduced corrosion damage
● Removes oxide layers, corrosion, surface dirt, oil and grease
residues.
Clean metal surfaces
● Flexible, can be used dry or wet, solvent-resistant.
Always ready for use
Description
Contents
ROVLIES
package of 10
g
No.
80
4.5268
Internal brushes for copper pipe
For fast cleaning of the soldering surface, rugged plastic handle.
For pipe dia.
mm
8
10
12
14
15
For pipe dia.
g
No.
60
70
80
90
100
85.4179
85.4180
85.4181
85.4182
85.4183
mm
16
18
22
28
35
g
No.
120
120
140
140
160
85.4184
85.4185
85.4186
85.4187
85.4188
6
External brushes for copper pipe
For fast cleaning of the soldering surface, tough housing.
For pipe dia.
mm
8
10
12
14
15
For pipe dia.
g
No.
80
90
100
110
120
85.4189
85.4190
85.4191
85.4192
85.4193
mm
16
18
22
28
35
g
No.
130
140
150
160
170
85.4194
85.4195
85.4196
85.4197
85.4198
Hand wire brushes
Version
Standard steel
Number of rows
3 rows
4 rows
g
No.
130
130
56.1351
56.1352
Welding blanket
offers protection up to 1000° C from welding flames and heat.
Melting point 840° C under direct flame contact. Reduced fire
hazard, also in case of long working times, protects wall coverings,
cables, carpets, and other flammable materials, highly flexible, good
formability enables it to be used everywhere, long service life,
non-asbestic, no risk to health.
Description
in plastic cover
170
Dimensions mm
330 x 500
g
No.
300
3.1050
Electric soft-soldering unit
ROTHERM 2000
Electric soft-soldering unit
For simple, safe, and time-saving soft soldering of 6 – 54 mm dia.
(1/4 – 2.1/8”) copper pipes without a flame.
Particularly suitable for repair and modification work in surroundings
or rooms with a fire hazard, as well as in building refurbishment.
Performance features
●
●
● Fast, pin-pointed heating of soldering surface
without an open flame:
Perfect and secure soldered joints
Heat resistant soldering unit suitable for building sites
with high 2,000 W heating power.
Compact design with small overall dimensions
for easy transport and convenient working
(L x W x H: 260 x 190 x 200 mm, only 10.5 kg).
● Highly flexible, extra long 4 m cables for
the solder gun:
Large working radius, also when
working under ceilings
● High performance, short soldering times:
Fast return on investment, no purchasing
and handling of gas cylinders.
● Soldering without open flame
No risk of fire from flammable
wall or floor covering, plastic
parts, etc.
● Thermal overload protection:
Automatic device switch-off
Simple replacement of electrodes and
electrode holders
● Generously dimensioned stainless steel
cooling ribs on both shanks of the tongs:
Prevent overheating of the handle
shells
Version
Rotherm 2000
kg
230V
50/60 Hz
110V
50/60 Hz
13.6
3.6700
3.6701
ROTHERM 2000 SOFT-SOLDERING SET
Set consisting of: Rotherm 2000 soft-soldering unit 230 V (No. 3.6700),
Rosol 3 soldering paste for fittings (No. 4.5225), Fittings soldering
paste 3 (No. 4.5255), ROVLIES® (No. 4.5268), Internal pipe brushes
10 mm (No. 85.4180) / 12 mm (No. 85.4181) / 15 mm (No. 85.4183)
/ 18 mm (No. 85.4185) / 22 mm (No. 85.4186), Sheet steel case
(No. 3.6715).
Version
Rotherm 2000 soft-soldering set
Sheet steel case
kg
230 V
50/60 Hz
110 V
50/60 Hz
17.8
3.5
3.6702
3.6715
3.6704
3.6715
Accessories
Accessories
Flat electrode with holder (pair)
Rod electrode with holder (pair)
Flat electrodes (pair)
Rod electrodes (pair)
g
130
150
30
40
No.
3.6711
3.6710
3.6721
3.6720
No. 3.6710
No. 3.6711
171
6
Basic
Standard solder
Application: For general soldering work on tinplate,
copper, brass, and for tinning — not suitable for
drinking water installations and electronics.
Universal soft solder to DIN EN 29 453, and flux
to DIN EN 29 454-1 2.1.1., S-Pb60Sn40, melting range 183 – 236° C.
Solder wire dia.
Version
2 mm
2 mm
Application: For all soldering work in electro-technology
and communications — not for drinking water
installations.
100 g coil
250 g coil
g
110
270
No.
4.5271
4.5270
Radio solder
Quality soft solder to DIN EN 29 453, and flux to DIN EN 29 454-1
1.1.2, S-Pb60Sn40, melting range 183 – 236° C.
Solder wire dia.
2 mm
2 mm
Version
100 g roll
250 g roll
g
110
270
No.
4.5261
4.5260
Electronic solder
Application: For soldering work in electro-technology,
electronics, miniature technology, printed circuits — not
suitable for drinking water installations.
Quality soft solder to DIN EN 29 453, and flux to DIN EN 29 454-1
1.1.3, S-Pb60Sn38Cu2, melting range 183 – 190° C, activated
without halogens, non-corrosive, all flux residues can remain on the
soldered joint without risk of corrosion.
Solder wire dia.
6
1.5 mm
1.5 mm
Version
100 g coil
250 g coil
g
110
270
No.
4.5281
4.5280
Fittings solder to DIN EN
Standard type to
DIN EN 29 453
Solder composition
in weight %
Melting
range
°C
Suitable for soft-soldering in the plumbing industry
Pipe material
Fittings material
Recommended flux
to DIN EN 29 454
S -Sn97Cu3
Sn 97 %, Cu 3 %
230 - 250°
Copper
Copper, gunmetal, brass
Part 1 - 3.1.1, 3.1.2, 2.1.2 or ROSOL 1
S -Sn97Ag3
Sn 96.7 %, Ag 3.3 %
221 - 230°
Copper
Copper, gunmetal, brass
Part 1 - 3.1.1, 3.1.2, 2.1.2 or ROSOL 3
Recommended heat source
Heat resistant soldering unit,
Propane/induced-air burner,
Acetylene/induced-air burner,
larger pipe diameters
above 28 mm with propane/oxygen
burner and dispersion nozzle
Standard hard solders to DIN EN
Standard type to
DIN EN 1044
Solder composition
in weight %
Melting
range
°C
Working temperature
°C
CP 203
P 5.9 - 6.5 / Cu rest
710 - 880°
730°
CP 105
Ag 1.5 - 2.5 /
P 5.9 - 6.5 / Cu rest
650 - 810°
710°
Suitable for brazing in the plumbing industry
Pipe
Fittings materimaterial
al
Recommended flux
to DIN EN 29454
Recommended heat source
Flux
Copper
Copper
Gunmetal
Brass
without flux
with flux
F-SH 1
or
LP 5
Copper
Copper
Gunmetal
Brass
without flux
with flux
F-SH 1
or
LP 5
Copper
Copper
Gunmetal
Brass
without flux
with flux
F-SH 1
or
LP 5
Acetylene/induced-air burner,
Copper
Copper
Gunmetal
Brass
without flux
with flux
F-SH 1
or
LP 5
larger pipe diameters
above 28 mm with
propane/oxygen burner
with dispersion nozzle
Propane/induced-air burner,
172
CP 104
Ag 4.0 - 6.0 /
P 5.7 - 6.3 / Cu rest
650 - 810°
710°
CP 102
Ag 14.0 - 16.0 /
P 4.7 - 5.3 / Cu rest
650 - 800°
710°
AG 306
Ag 29 - 31 / Cd 19 - 23
Cu 27 - 29 / Zn rest
600 - 690°
680°
Steel
Copper
Steel, copper
Gunmetal
Brass
with flux
(U = sheathed
from 22 mm pipe dia.)
F-SH 1
or
LP 5
AG 106
Ag 33 - 35 / Cu 35 - 37
Sn 1.5 - 2.5 / Zn rest
630 - 730°
710°
Steel
Copper
Steel, copper
Gunmetal
Brass
with flux
(U = sheathed
F-SH 1
or
LP 5
AG 304
Ag 39 - 41 / Cd 18 - 22
Cu 18 - 20 / Zn rest
595 - 630°
610°
Steel
Copper
Steel, copper
Gunmetal
Brass
with flux
(U = sheathed
F-SH 1
or
LP 5
AG 104
Ag 44 - 46 / Cu 26 - 28
Sn 2.5 - 3.5 / Zn rest
640 - 680°
670°
Steel
Copper
Steel, copper
Gunmetal
Brass
with flux
(U = sheathed
F-SH 1
or
LP 5
Basic
Fittings solders
Quality soft solders to DIN EN 29453 for joining copper pipes to
copper, gunmetal, and brass fittings for hot and cold-water
plumbing in accordance with DVGW Worksheet GW 2, without flux
core, for use with corresponding ROSOL fittings solder paste.
Fittings solder 1 S
Solder wire dia.
Quality soft solder S-Sn96Ag4, melting range 221 – 240° C,
for use with ROSOL 1 S soldering paste.
2 mm
3 mm
3 mm
Version
250 g roll
100 g roll
250 g roll
g
270
110
270
No.
4.5252
4.5251
4.5250
Fittings solder 3
Quality soft solder S-Sn97Cu3, melting range 230 – 250° C, for use
with ROSOL 3 S soldering paste.
Solder wire dia.
2 mm
3 mm
3 mm
Version
250 g roll
100 g roll
250 g roll
g
270
110
270
No.
4.5257
4.5256
4.5255
Fittings solder paste ROSOL
Quality soft solders to DIN EN 29453, with flux core to DIN EN
29454-1 3.1.1.C, with test mark DVGW Reg.-Nr. Fl 028, for joining
copper pipes to copper, gunmetal, and brass fittings for hot and
cold-water plumbing in accordance with DVGW Worksheet GW 7,
metal content 60% by weight, flux residues are 100% water
soluble.
6
ROSOL 1 S
Fittings solder paste
Quality soft soldering flux, metal content: S-Sn97Ag3,
only for use with fittings solder 1 S.
Version
Version
In plastic bottle
250 g
g
270
No.
4.5220
ROSOL 3
No. 4.5220
Fittings solder paste
Quality soft soldering flux, metal content: S-Sn97Cu3,
only for use with fittings solder 3 S.
Version
Version
In plastic bottle
250 g
g
270
No.
No. 4.5225
4.5225
Fittings soft solder flux
To DIN EN 29454-1 3.1.1.C, with test mark DVGW Reg.-Nr. Fl 035,
flux residues are 100% water soluble, for joining copper pipes to
copper, gunmetal, and brass fittings for hot and cold-water
plumbing in accordance with DVGW Worksheets GW 2 and GW 7,
also for general-purpose soldering work.
Version
In plastic tube
Version
35 g
g
45
No.
4.5266
173
Hard solders
Hot
Max
Hard solder rings S 5
High-quality safety solder material with silver-phosphorus content, guaranteed to DIN EN 1044, CP 105
●
●
●
Ideal for capillary soldering with copper pipe installations in
sanitary and heating systems.
No lost material through dripping
Matched precisely to the inner pipe diameters of bushed pipes
and fittings to DIN 2856:
Complete wetting of bushes
Particularly efficient working through precise solder quantity:
No preparatory or re-work of the soldered joint
Alloy (weight %)
Melting range:
Working temperature:
Joinable materials:
Use of flux with:
Ag 1.5 – 2.5/P 5.9 – 6.5/Cu rest
650° – 810° C
710° C
Copper, gunmetal, brass, bronze
Gunmetal, brass, and bronze with hard
solder paste LP 5
Supplied in 250 g plastic bag
simple insertion
precise quantity of solder
simply heat, no dripping, no reduction of
cross-section
Outside dia. mm
Approx. content, rings
12
14
15
16
18
22
28
395
268
244
228
186
106
79
pcs
pcs
pcs
pcs
pcs
pcs
pcs
g
No.
260
260
260
260
260
260
260
4.0512
4.0514
4.0515
4.0516
4.0518
4.0522
4.0528
6
Hard solder paste LP 5
Flux for hard soldering at working temperatures above 600° C,
to DIN EN 29454, Type F-SH 1, DVGW-tested, Reg.-Nr. Fl 033,
for gas and water installations with copper pipes, recommended by
DVGW in accordance with Worksheets GW2 and GW 7, hard
solders with silver content and usable with any basic materials of
steel, copper and copper alloys, brass, and gunmetal, working
temperature range 550 – 800° C, flux residues must be removed
carefully.
Version
Version
LP 5 in plastic bottle
g
160 g
No.
180
4.0500
Hard solder powder HKM
Flux for hard soldering at working temperatures above 800° C,
to DIN EN 29454, Type F-SH 2, working temperature range 750 –
1100° C, useable for copper and copper alloys, brass, gunmetal,
nickel silver, bronze, steel, galvanized steel, grey iron, and malleable
cast iron, for welding copper and brass in dry condition, can be
mixed with cleaned water to form a paste, flux residues must be
removed carefully.
Version
Version
HKM in plastic bottle
160 g
g
No.
180
3.5611
Flux brush
174
Description
Width mm
Length mm
Flux brush
13
140
g
20
No.
53.0261
Hard solders
Hot
Max
Hard solders
For copper pipe installation
ROTHENBERGER ROLOT special hard solders are particularly suited
for copper pipe installations in cold and hot water systems, for open
and closed heating systems, for gas installations in accordance with
DVGW Worksheet GW 2 (liquid, natural, and town gas) as well as
for HVAC and refrigeration applications, and for oil pipes;
ROTHENBERGER ROLOT is specially suited for capillary soldering of
copper pipes without fittings. Copper/phosphorus/silver solders are
highly formable, and are therefore recommended for joints that are
subjected to high thermal and mechanical alternating loads.
●
●
●
●
●
●
Non-foaming
Heat-resistant up to 200° C
No flux required with copper/copper joints
Flux LP 5 is to be used when joining brass, gunmetal,
copper, tin, and copper/tin alloys
Not to be used with materials containing sulphur, with iron/nickel
alloys or with copper alloys containing nickel.
Manufactured with new, environmentally compatible technology,
corrosion neutral, scale-free, improved flow properties.
ROLOT® S 94
CP 203
Quality hard solder guaranteed to DIN EN 1044; due to its low
phosphorus content, the solder has a wide melting range, and gives
soldered joints with increased strength. Standard solder for normallystressed copper pipe installations, especially for capillary soldering
with copper pipe installations without fittings.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required with:
P 5.9 – 6.5/Cu rest
710 – 880° C:
730° C
Brass, gunmetal, bronze with LP 5
ROLOT® S 94 XN
Version
Contents
1 kg in a carton
1 kg in a carton
in 5 kg
plastic bag
6
Square section mm
Length mm
g
2x2
3x3
2x2
500
500
500
1,025
1,025
5,025
Square section mm
Length mm
g
2x2
500
1,025
No.
4.0094
4.0095
4.0094A
CP 203
Quality hard solder, guaranteed to DIN EN 1044, excellent flow
characteristics thanks to a special manufacturing process, even melting for perfect joints, capillary and sealing action, ideal for capillary
soldering in sanitary, heating, and gas installations.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required with:
P 5.9 – 6.5/Cu rest
710 – 880° C
730° C
ROLOT® S 1
CP 203
Version
Contents
1 kg in a carton
No.
4.0097X
Special quality hard solder, not standardized, similar to
DIN EN 1044, CP 203, for normally-stressed copper pipe systems,
also for capillary soldering for copper pipe installations
without fittings.
Melting range:
Joinable materials:
Flux required with:
710 – 880° C
730° C
Version
Contents
1 kg in a carton
circular dia. mm Length mm
2
500
g
1,025
No.
4.0102
175
Hard solders
Hot
ROLOT® S 2
Max
CP 105
Special quality hard solder, not standardized, similar to
DIN EN 1044, with low silver content, matched to normally-stressed
copper pipe systems, ideal for capillary soldering.
Melting range:
Joinable materials:
Flux required with:
ROLOT® S 2
710° – 820° C
720° C
Gunmetal, brass, bronze
with hard solder paste LP 5
Version
Contents
Square section mm Length mm
1 kg in a carton
1 kg in a carton
2x2
3x3
g
500
500
1,025
1,025
Length mm
g
500
500
1,025
1,025
No.
4.0202
4.0203
CP 105
Silver/phosphorus safety hard solder, guaranteed to DIN EN 1044,
for higher-stressed copper pipe systems, ideal for capillary soldering
in sanitary, heating, and gas installations.
Alloy (weight %) – %)
Melting range:
Joinable materials:
Flux required with:
ROLOT® S 5
6
Ag 1.5 – 2.5/P 5.9 – 6.5/Cu Rest
650° – 810° C
710° C
Version
Contents
Square section mm
1 kg in a carton 2 x 2
1 kg in a carton 3 x 3
No.
4.0212
4.0213
CP104
Particularly high-quality hard solder, not standardized, similar to
DIN EN 1044, with low silver content, ideal for capillary soldering in
sanitary, heating, and gas installations.
Melting range:
Joinable materials:
Flux required with:
ROLOT® S 5
710° – 820° C
720° C
Version
Contents
Square section mm
Length mm
g
2x2
500
1,025
Square section mm
Length mm
g
2x2
500
1,025
Square section mm
Length mm
g
500
1,025
1 kg in a carton
No.
4.0502
CP 104
High-quality silver/phosphorus safety hard solder, guaranteed to
DIN EN 1044, for higher-stressed copper pipe systems, ideal for
capillary soldering in sanitary, heating, and gas installations.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required with:
Ag 4 – 6/P 5.7 – 6.3/Cu rest
650° – 810° C
710° C
Version
Contents
1 kg in a carton
No.
4.0005
ROLOT® S 15 CP 102
Particularly high-quality silver hard solder, guaranteed to
DIN EN 1044, specially for capillary soldering subject to high
thermal and mechanical alternating loads in HVAC systems as well
as demanding sanitary and gas installations.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required with:
176
Ag 14.0 – 16.0/P 4.7 – 5.3/Cu rest
650° – 800° C
710° C
Version
Contents
1 kg in a carton
2x2
No.
4.0015
Hard solders
Hot
Max
Important note:
The hard solder Series S 30, S 30 U, S 45, and S 45 U contain cadmium, and are therefore only permitted outside of drinking water
installations for hygienic reasons. Accident Prevention Regulations
(e.g. VBG 15) require that adequate workplace ventilation must be
ensured when working with cadmium-containing solders. Harmful
vapours can arise due to overheating. In case of continuous soldering
operations, extraction devices must be provided.
Silver hard solders
Ag 306
S 30 / S 30 U flux-covered
Contains cadmium, quality silver hard solder, guaranteed to
DIN EN 1044, plain (S 30) or covered in flux to DIN 8511 F-SH 1
(S 30 U), universal application areas for gap soldering, excluding
drinking water installations, heat-resistant up to 200° C.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required:
Ag 29.0 – 31.0/Cd 19.0 – 23.0
Cu 27.0 – 29.0/Zn rest
600° – 690° C
680° C
Steel, malleable cast iron, copper,
gunmetal, brass, copper and nickel alloys
for S30 always with hard solder paste LP 5
Version
Contents
100 g plastic bag
250 g plastic bag
1,000 g plastic bag
dia. mm
g
S 30
No.
2
2
2
110
260
1,010
4.4901
4.4902
4.4900
dia. mm
g
S 34
No.
2
2
2
110
260
1,010
4.4910
4.4911
4.4912
dia. mm
g
S 45
No.
2
2
2
110
260
1,010
4.5002
4.5007
4.5004
dia. mm
g
S 45
No.
2
2
2
110
260
1,010
4.5050
4.5051
4.5052
S 30 U
No.
4.4921
4.4922
4.4930
Silver hard solders
Ag 106
S 34 Cu / S 34 Cu U flux-covered
Free of cadmium, quality silver hard solder, guaranteed to
DIN EN 1044, plain (S 34 Cu) or covered in flux to DIN 29454
F-SH 1 (S 34 Cu U), universal application areas for gap soldering,
also for drinking water installations, heat-resistant up to 200° C.
Alloy (weight %)
Melting range:
Joinable materials:
Flux required:
Ag 33.0 – 35.0/Cu 35.0 – 37.0
Sn 1.5 – 2.5/Zn rest
630° – 730° C
710° C
for S 34 Cu always with hard solder
paste LP 5
Version
Contents
100 g plastic bag
250 g plastic bag
1,000 g plastic bag
S 34 U
No.
4.4915
4.4916
4.4917
Silver hard solders
Ag 304
S 45 / S 45 U flux covered
Contains cadmium, quality silver hard solder, guaranteed to
DIN EN 1044, plain (S 45) or covered in flux to DIN 29454 F-SH
1 (S 45 U), universal application areas for gap soldering, excluding
Alloy (weight %)
Melting range:
Joinable materials:
Flux required:
Ag 39.0 – 41.0/Cd 18.0 – 22.0
Cu 18.0 – 20.0/Zn rest
595° – 630° C
610° C
for S 45 always with hard solder paste LP 5
Version
Contents
100 g plastic bag
250 g plastic bag
1,000 g plastic bag
S 45 U
No.
4.5102
4.5104
4.5103
Silver hard solders
Ag 104
S 45 Cu / S 45 Cu U flux-covered
Free of cadmium, quality silver hard solder, guaranteed to
DIN EN 1044, plain (S 45 Cu) or covered in flux to DIN 29454 F-SH 1
(S 45 Cu U), universal application areas for gap soldering, also for
Alloy (weight %)
Melting range:
Joinable materials:
Flux required:
Ag 44.0 – 46.0/Cu 26.0 – 28.0
Sn 2.5 – 3.5/Zn rest
640° – 680° C
670° C
for S 45 Cu always with hard solder
paste LP 5
Version
Contents
100 g plastic bag
250 g plastic bag
1,000 g plastic bag
S 45 U
No.
4.5055
4.5056
4.5057
177
6

Soldering, brazing, and welding technology

Transcription

Similar documents

Brazing, Soldering, Welding, Fluxes

INDUSTRIAL

acoplamientos bamatec - Sadi Transmisiones, S.A.

Delivery program - FELDER GMBH | Löttechnik

Make Sure Minimum Order Quantity 6