February 2014 Flyer Book.indb

EVEN MORE SAVINGS
Februaryy 13th - 15th
FREE Smokies & Pop
Duringg our 3-Dayy SALE
On All Victor
Products
See Pages 4-13
Tekz Auto Darkening
Welding Helmet
Tweco 141i 3-N-1 Inverter Welder
MIG, TIG & STICK WELDER, ALL IN ONE!
• Adjustable shade from DIN# 9 - 13
• 3.85" x 1.70" Viewing area
• Protects against
IR and UV rays
• Lightweight
• Solar powered
Reg. $64.99
TTN-41254
$4995
)HEWK7RWK
$4495
Save
30%
WE CARRY OVER 20 DIFFERENT STYLES
AND 9 CLASSES OF WELDING HELMETS
Campbell Hausfeld
3.5 HP Compressor
• MIG 90A, 20% duty cycle,
includes MIG torch and is
spoolgun ready for aluminum
• DC TIG 100A, 20% duty cycle
for mild and stainless steel
• STICK 80A, 35% duty cycle
includes electrode holder
• 3 year warranty
• Only 32lbs
)HEWK7R
Reg. $749.99
TWE-W1003141
$62995
WK
$59995
Save
$150
70% DUTY CYCLE, UP TO
5,000 HOUR LIFE EXPECTANCY
• 10.3 CFM @ 90 PSI
• 230V,14.5A, 60 Gallons
• Oil lubricated, cast iron pump
Reg. $599.99
CH-VT636200RB
$46995
Save
$150
)HEWK7RWK
$44995
If you find a better deal, we'll match it or beat it
Right down to cost - Visit your local store for hundreds of instore specials!
2
kmstools.com
SERVING WESTERN CANADA
FROM VANCOUVER ISLAND TO THE PRAIRIES
Thermal Arc 252i 3-N-1 Welder
• Capable of MIG 250A, 40% duty
cycle, includes MIG torch and is
spoolgun ready for aluminum
• DC TIG 250A, 40% duty cycle
for mild and stainless steel
• STICK 230A, 40% duty cycle
includes electrode holder
• Output range 5-300A
• Power rectifier for efficient energy usage
• 3 year warranty
Reg. $2599.99
THA-W1004401
$229995
Millermatic 252 MIG Welder
MOST FULL-FEATURED MIG AVAILABLE
• Welds 22 gauge to 1/2" mild steel
• Input 250A @ 28 VDC, output 30-300A
• 60% duty cycle @ 200A
• Angled wire drive
• Infinite voltage control/digital display
• Auto gun detect
• 3 year warranty
Save
$250
Reg. $2599.99
MEM-907321
$239995
)HEWK7RWK
$234995
Save
$300
IncludesMIG gun, 10‘ work
cable with clamp,
gas regulator, set-up
and operation DVD
Miller 200 3-N-1 Welder
Tweco 200A Spool Gun
• 200 amps @ 20% duty cycle
• Feeds .030 to .035 aluminum wire
• 25' cable
• Includes case and extra
consumables
Reg. $799.99
THA-10271391
$64995
Save
$150
DUAL VOLTAGE
• Capable of MIG 150A, 20% Duty
Cycle, includes MIG torch and is
spoolgun ready for aluminum
• TIG 150A, 30% Duty Cycle for
mild and stainless steel
• STICK 150A, 30%
duty cycle
y includes
electrode
ode holder
• Auto set elite
• Only 27lbs
7lbs
• 3 year warranty
Save
$300
Reg. $2299.99
99.99
7518
MEM-907518
$1999995
Thermal Dynamics Cutmaster 102
Plasma Cutter
1" RECOMMENDED CUT CAPACITY
• Multi-Voltage from 208-460v, 1PH or 3PH
• Maximum 1-3/4" cut capacity
• 100% Duty cycle at 70A @ 230V
• Requires 7.5CFM at 70 PSI
• Built in storage compartment for consumables
• Weighs only 62Ibs
• 4 Year Warranty
Reg. $3999.99
THD-CUT102
Miller TIG Torch
T h Kit
K
FOR MULTIMATIC 200
• Includes everything need to TIG weld with
the Multimatic 200 3-N-1 machine
• Includes case
Reg. $529.99
MEM-300851
$329995
Save
$80
$44995
Save
$700
ON-SITE SALES • SHOP INSTALLATIONS • LEASING & FINANCING AVAILABLE
ITEMS SPECIAL ORDER IN SOME LOCATIONS
PHONE:
1-800-567-8979
1
800 567 8979
FAX:
kmstools.com/accountsales
1
1-800-567-3799
800 567 3799
CHECK ONLINE TO FIND YOUR SALES REP.
GRINDERS / ABRASIVES
February 2014
Bosch 4 1/2"
Angle Grinder
Metabo 5"
Angle Grinder
5 TIMES EPOXY
COATED WINDINGS
• 10 amp, AC/DC motor
• 10,000 RPM
• Non-locking trigger
• Slim body design for improved ergonomics
• Includes grinding wheel
• 6 amp Motor
• 11,000 RPM
Reg. $79.99
BOB-1375A
Reg. $159.99
MET-W1080RT
95
$49
$11995
)HEWK7RWK
$3995
Save
$50
)HEWK7RWK
Makita 5" Angle Grinder
INDUSTRY STANDARD
• 10A, AC/DC Motor
• 10,000 RPM
• Lock-on trigger
$10995
Save
up to
$50
Metabo 5" Variable
Speed Grinder/Polisher
TOOL-FREE WHEEL CHANGES
AND ADJUSTABLE GUARD
Reg. $159.99
MAK-9005B
• 8.5 amp motor 3000-10,000 RPM
• Torque limiting clutch
• Restart protection
• Includes grinding wheel
side handle
95
$119
$10995
If you buy $20 of 5" abrasives!
Save
$70
Reg. $229.99
MET-WE9125
Metabo Variable
Speed Die Grinder
$16995
NOW WITH SPINDLE LOCK
• 6.4 amp motor
• 10,000 - 30,500 RPM
• Electronic constant
onstant
speed control
ontrol
• Auto-stop
top carbon
brushes
Reg. $349.99
9
MET-GE710
$239
Makita 14" Cut-Off Saw
• 15 amp motor
• Quick release vise
• 45o pivoting fence
• Spark guard
• Includes abrasive wheel
95
$169
$15995
Save
up to
$50
If you buy $30
of 14" abrasives!
EZ Strip Medium
Surface Prep Discs
• Non woven wheels for cleaning
welds and fast removal
of paint, rust, scaling,
oxidation, sealants, etc
Reg. $11.99 - $12.99
4 1/2" DIS-SPD412MED
$599
5" DIS-SPD5MED
$649
$15995
MADE IN
GERMANY
Hitachi 7" Angle Grinder
S e
Sav
$110
95
Reg. $209.99
MAK-2414NB
)HEWK7RWK
• 15 amp motor
• AC/DC switch
• 8,500 RPM
Reg. $179.99
HIT-G18SS
$9995
LIMITED
QUANTITY
)HEWK7RWK
$8995
Makita 12" Dry Cut Saw
CUTS FASTER, CLEANER AND LASTS
LONGER THAN ABRASIVE SAWS
• 15 amp motor
• 1300 RPM
• Mitres 45o left
• 60 tooth carbide tip blade
• Unique adjustable fence
• Virtually burr free
Reg. $579.99
MAK-LC1230
$46995
Save
$130
)HEWK7RWK
$44995
Walter Zipcut Wheels
4 1/2"
5"
Reg. $4.20
WAL-11T042
Reg. $4.65
WAL-11T052
$229
$319
Save
up to
45%
3
4
WELDING
kmstools.com
MIG/TIG/Stick 3-N-1 Machines by
Thermal Arc Heavy
Duty Weldingg Cart
Welding Helmet
• Solid steel
robust design
• Accommodates
es
up to 252i plus
s
plasma cutter
and a cylinder
• Two drawers too
store parts and
nd
accessories
With purchase of
Tweco 3-N-1
Welding Machine
and mail-in rebate
See in-store for details
Valued at $142
Reg. $399.95
THA-W4015001
$19995
Actual
Act
al helm
helmet
may vary
Thermal Arc 181i 3-N-1 Welder
LIGHTWEIGHT MULTI PROCESS WELDER
• Capable of MIG 180A, 20% duty
cycle, includes MIG torch and is
spoolgun ready for aluminum
• DC TIG 175A, 25% duty cycle
for mild and stainless steel
• STICK 175A, 20% duty cycle
includes electrode holder
• Only 32.2lbs
• 3 year warranty
Tweco 160A Spool Gun
COMPATIBLE WITH THERMAL
ARC 211I AND 181I
• Feeds .030 to .035 aluminum wire
• 160A @ 20% duty cycle
• 15' Cable
• Includes case and extra
consumables
Reg. $1099.99
THA-W1003181
$84995
Reg. $379.99
THA-10271390
$60
• Includes everything need to TIG
weld with the Thermal Arc 181i
and 211i 3-N-1 machine
$82995
Save
$412
$31995 Save
181i/211i TIG Torch Kit
)HEWK7RWK
Save
$120
Reg. $269.99
THA-W4014603
$18995
)HEWK7RWK
Thermal Arc 211i 3-N-1 Welder
$14995
DUAL VOLTAGE
141i TIG Torch Kit
Reg. $159.99
TWE-W4013802
$13995
Save
$30
)HEWK7RWK
$12995
Foot Control
FOR THERMAL ARC140I,181I AND 211I
• Allows control of power when TIG welding
with Thermal Arc 3-N-1 welders
Reg. $259.99
THA-600285
$19995
Save
$60
• MIG 200A, 20% duty cycle,
includes MIG torch and is
spoolgun ready for aluminum
• DC TIG 200A, 25% duty cycle
for mild and stainless steel
• STICK 200A, 25% duty cycle
includes electrode holder
• Holds upp to 44lb wire spool
p
nly 58lbs
• Only
• 3 year warranty
Reg.
g. $1599.99
A-W1004201
THA-W1004201
$1199
19995
Save
$592
)HEWK7RWK
$114995
WELDING
February 2014
All Millermatic models include:
• 3 Year Warranty
• MIG gun, 10‘ work cable with clamp,
gas regulator, set-up and operation DVD
MIG/TIG Cart
With purchase
of Millermatic
140,180, or
211 Auto-Set
MIG Welder
Valued at $130
MEM-300425
Auto-Set MIG Welders
Millermatic 140
$174995
Save
$200
Spoolmate 100 Spool Gun
• Feeds .030 or .035 aluminum wire
• 135A @ 30% duty cycle
• Fits Millermatic
140, 180 and
Multimatic
welders
Reg. $769.99
MEM-907335
$74995
Save
$150
• Welds 24 Ga to 5/16" steel
• Input 20A @ 230V,
output 30-180A
• 30% duty cycle
@ 135A
• Spatter free
starts
• Auto-temp
shutdown
• Simple heat and
speed selection
Reg. $279.99
MEM-300371
$24995
Save
$190
Save
$30
Spoolmate 200 Spool Gun
• Feeds 0.030" or 0.035" aluminum MIG wire
• 160A @ 60% duty cycle
• 20' cable
• Fits 212, 251 and
252 welders
Reg. $749.99
MEM-300497
$69995
Reg. $929.99
MEM-907312
$67995
Millermatic 211
Save
$280
• Welds 24 Ga up to 3/8" steel
• Input 20A @ 120V or 25A @ 230V
• Output 90A @ 20 VDC (120V),
150A @ 25 VDC (230V)
• 20% Duty Cycle @ 90A on 110V, 30% duty
cycle @ 150A on 230V
• Spatter free
starts
• Simple heat
and speed
selection
Miller 30A Spool Gun
• 200A @ 100% duty cycle
• .023 - 1/16" wire diameter
• 30' cable
• Fits direct onto Miller
252 and 350P
• For use with most CC/
CV, DC power sources
Reg. $1399.99
MEM-130831
$114995
Reg. $1349.99
MEM-907422
$124995
)HEWK7RWK
$119995
Save
$70
)HEWK7RWK
$86995
DUAL VOLTAGE
• Welds 22 gauge to 3/8" mild steel
• Input 208/ 240V
28 VDC, output
30-210A
• 60% duty cycle
@ 160A
• Angled wire drive
• Infinite voltage
control/
digital display
• Auto gun detect
Reg. $1949.99
MEM-907405
• Welds 24 Ga to 3/16" steel
• Input 20A @ 115V,
output 30-140A
• 20% duty cycle @ 90A
• Spatter free
starts
• Auto-temp
shutdown
• Simple heat and
speed selection
Millermatic 180
Millermatic 212
Auto-Set MIG Welder
)HEWK7RWK
$112995
Save
$270
5
WELDING
kmstools.com
6
Gas Welding
Unison 100 Amp Fluxcore Welder
EASY-TO-USE GASLESS
FLUX-CORE WELDER
Oxy/Acet Torch Set
• Welds up to 3/16" thick
mild steel in one pass
• 35% duty cycle at 60 Amps
• Tweco compatable MIG torch
• Input 20A @ 120V
• Thermal overload protector
• 2 year warranty
250 SERIES VICTOR FIREPOWER TORCH KIT
Save
$100
Reg. $249.99
UNP-WE2108
$18995
• 40 CuFt Acetylene
tylene tank
• 55 CuFt Oxygen
gen tank
• Cylinder Cart
• Includes hose,,
regulators,
welding
& cutting
attachments
and striker
Reg. $669.99
KIT-O55A40FP
)HEWK7RWK
$54995
$14995
Save
$120
Unison Upright Welder
& Cylinder Cart
Oxy/Acet
Torch Set
• Holds one bottle and up to
3 machines
• Stands tall for easy
access to controls
MEDIUM DUTY
Save
$40
Reg. $99.99
UNP-WEK9000
$6995
)HEWK7RWK
Reg. $449.99
UNIW-TI350T
$5995
$31995
Save
$130
Lincoln Electric
Welding Cart
• Lightweight cart for welder,
cylinder, cables and accessories
• Includes angled top shelf for easy
access to controls and lower
tray for accessory storage
• Fits most small welders
Reg. $149.99
LNC-K22751
• 10 CuFt Acetylene tank
• 20 CuFt Oxygen tank
• Includes hose,
regulators,
welding & cutting
attachments and
carry case
Save
$30
$11995
Bernzomatic
Torch Kit
• Trigger start torch for easy use
• Adjustable flame accommodates
s
different solder and brazing
applications
• Includes 14oz propane bottle
Reg. $39.99
BER-TS3000
$3195
Weller Soldering Iron Kit
WITH LED'S
• Use for soldering or wood burning
• Ideal for electronics
Reg. $21.99
WEL-SP25NKCN
$177
10' Hose & Argon Flow Meter
• For Argon and mixed gas
• Ball bearing provides
the most accurate
reading
Reg. $99.99
WA-AR606HP
95
$6995
We stock a full line of
Weller soldering accessories
Save
20%
)HEWK7RWK
$6495
Save
$35
PLASMA CUTTING
February 2014
Thermal Dynamics Cutmaster 42
Plasma Cutter
Miller Spectrum 375 X-TREME
Plasma Cutter
• Dual voltage
• Rated 1/4" mild steel at 60 in/min
• Rated 5/8" mild steel at 13 in/min
• Severs up to 7/8" @ 5 in/min
• Input: 120-230V, 1PH
• 40% duty cycle at 40A @ 230V
• Requires 3.2CFM at 75 PSI
• Weighs only 26Ibs
Save
$350
Reg. $1449.99
THD-CUT42
95
$1149
)HEWK7RWK
$109995
NEW FASTER CUTTING XT30 TORCH
7
Save
$300
• Longer lasting torch consumables
• Dual voltage
• Rated 3/8" mild steel at 18in/min
• Severs up to 5/8" @ 5 in/min
• Input: 115V/230V MVP (multivoltage plug), 1PH
)HEWK7RWK
• 35% Duty cycle at 27A/230V
95
• Weighs
g onlyy 18lbs
• Includes
ncludes torch
& carrying case
• 3 year warranty
$12
129999
Reg.
eg. $1599.99
MEM-907529
$1349
134995
Thermal Dynamics Cutmaster 52
Plasma Cutter
1 1/8" MAXIMUM CUT
• Rated 1/2" mild steel up to 35 in/min
• Pierce up to 1/2"
• Input: 208-230V, 1PH
• 40% duty cycle @ 60A
• 100% duty cycle
cyc e @ 50A
• Requires 6.7CFM
7CFM @ 75psi
• Weighs onlyy 43Ibs
Save
$650
Reg. $2299.99
THD-CUT52
$169995
)HEWK7RWK
$164995
Miller Spectrum 625
X-TREME Plasma Cutter Save
work clamp
Reg. $1999.99
MEM-907579001
$1799
9995
Unison Plasma Cutter
• Dual voltage
• Rated 1/4" mild steel at
10 in/min with 230V
• Input: 120-230V,
0 230V, 1PH
• 40% dutyy cycle at 40A @ 230V
• Requires 4.2CFM at 70 PSI
• Weighs only
nly 25Ibs
$250
NEW REMOVABLE TORCH
• Longer lasting torch consumables
• Dual voltage
• Rated 3/8" mild steel at 36 in/min
• Rated 5/8" mild steel at 13 in/min
• Severs up to 7/8" @ 5 in/min
• Input: 208-230V, 1PH
Includes case,
• 50% Duty cycle at 40A
torch with
• Weighs only 23Ibs
20' cable, and
• 3 Year warranty
)HEWK7RWK
$174995
Save
$80
Reg. $679.99
9
5
UNP-WEP375
Plasma Cutter Circle Cutting Guide
$59995
• For use with Miller XT torches
• Can cut straight lines or circles
up to 12" diameter
Reg. $189.99
MEP-253055
Norgren 1/4" Coalescing Air Filter
KEEPS YOUR PLASMA RUNNING
CLEAN AND LONG
• 10 CFM Capacity
• 0.01 Micron element for high
efficiency removal of oil and
other particles
Reg. $79.99
NG-F72C2ANQE0
$5995
Save
25%
We have a full range of
accessories to plumb your shop.
$14995
Save
$40
Miller Filter Kit
• Removes water, oil and other
particles as small as .825 micron
Reg. $89.99
MEP-228926
$7995
Save
$10
Replacement Element $1495 MEP-228928
8
WELDING
kmstools.com
Miller Dynasty 200DX
Inverter TIG Welder Kit
Thermal Arc 186
AC/DC TIG Welder
HIGH FREQUENCY AND LIFT
ARC TIG AND STICK
•
•
•
•
•
•
•
•
•
TIG and STICK accessories all included
25% Duty Cycle @ 180A
Current range 10-200A
Adjustable AC Frequency, Wave Balance,
Pulse Control, Arc Force and Hot
Start control
Preflow and postflow control for gas
Upslope/downslope and crater modes
Overload Protection
Only 48.4lbs
3 Year Warranty
Save
$350
Reg. $2199.99
THA-W1006303
95
$1899
•
•
•
•
TIG and stick ready
60% Duty Cycle @150A
Output 1 - 200 amps CC, AC/DC
Input 110V - 460V single or three phase
auto-line technology automatically adjusts
for input voltage including spike protection
• High frequency and lift arc start up
• Adjustable pulse control
• Fan on demand
• Includes contractor kit with foot control,
regulator, TIG torch 150A and 25'
cable, ground clamp, electrode holder
• Weighs only 45lbs
• 3 Year warranty
Reg. $4299.99
MEM-951174
$419995
Save
$100
)HEWK7RWK
$184995
Miller Diversion 180 TIG Welder
Waterproof Electrode Tube
DUAL VOLTAGE
•
•
•
•
•
•
•
35% Duty Cycle @ 125A on 110V
20% Duty Cycle @ 150A on 230V
Welds .0030" up to 3/16" mild steel or aluminium
Input 115V or 230V with included multi voltage plug
High frequency start, no tip contact required
Only 50lbs
3 year warranty
Save
40%
Save
$200
Reg. $2099.99
MEM-907627
$189995
Size
Includes torch,
regulator, foot
control, TIG Welding
for Dummies book,
instructional DVD
and more.
Miller Trailblazer 325
Welder/Generator
ELECTRONIC FUEL INJECTION
• 25 HP Kohler engine with 45L gas tank
• 325 Amps at 28 Volts, 100% Duty Cycle
• 12,000 watt peak, 10,500 watt continuous
• Up to 50% increased runtime, 35%
reduced fuel consumption & up to 68%
quieter, with a reduced size and weight
• Run most jobsite tools at idle speed
• Self-calibrating digital meters with
maintenance displays
• 3 year warranty
Reg. $6199.99
MEM-907512001
$559995
Save
$600
Sale
95
14"
$9
18"
$1495
WA-TUBES14
WA-TUBES
Reg. $14.95
Reg. $19.95
3 DAY SALE
$895
$1195
Lincoln Electric Ranger 305G
Welder/Generator
• 23HP Kohler Engine with 45L gas tank
• 100% duty cycle @ 300 Amps and 29 volts
• 10,500 Watt peak, 9,500 Watt continuous
• Chopper Technology provides easy
starts, a smooth arc, low spatter
and excellent bead appearance
• Electric fuel pump avoids vapor
lock at high altitudes
• 3 year warranty
Reg. $4499.99
LNC-K17265
$429995
Save
$200
WELDING
February 2014
Sliding Arm Clamps
MOST VERSATILE SLIDING
ARM CLAMP ON THE MARKET
Nomad Portable
N
P
l Welding
Wl
TTable
l
• Table top 30" x 20" with three 1" slots
to allow clamping through the table
• Equipped with two
retractable
guide rails
• Folds together
for easy storage
Reg. $159.99
STH-TS3020
up to
37%
4" X 3.25"
Reg. $14.99
STH-UD45
)HEWK7RWK
$995
$1195
6" X 3.25"
Reg. $16.99
STH-UD65
)HEWK7RWK
$1095
$1295
$12995
Save
8" X 3.25"
Reg. $18.99
STH-UD85
)HEWK7RWK
$119
95
Save
$40
Spring Clamps
ONE HANDED OPERATION
MOST VERSATILE SLIDING
ARM CLAMP ON THE MARKET
• Magnetic V-Pad assists
clamping odd shapes
• 500lbs Clamping pressure
• Can be used as a standard
sliding arm clamp, pipe clamp,
spreader clamp and step
over clamp
Save
• Includes V-pad
and extender block up to
41%
accessories
3.5" X 3.25"
5.5" X 3.25"
12" X 5.5"
20" X 5.5"
20" X 7"
Reg. $119.99
STH-UM205C3
Reg. $199.99
STH-UP205C3
$6995
$7995
$14995
$59
)HEWK7RWK
$69
95
Magnetic Holders
• Switch turns magnet on and
off for easy set up
80lb
• 4 3/8" x 3 3/4" x 1 1/8"
Reg. $39.99
STH-MSA46
$2995
)HEWK7RWK
$2495
140lb
• 6" x 5 1/8" x 1 7/16"
Reg. $64.99
STH-MSA48
95
$49
)HEWK7RWK
$1495
Multi-Angle Magnet
• 45o, 60o & 90o angles
• 55-80lbs of pull
• 5 1/2" x 4 3/8" x 3/4"
Reg. $16.99
STH-MS346C
$1295
Save
23%
Save
up to
37%
3 Axis Multi-Angle Magnets
2 PACK
• 45o, 60o and 90o angles
• Interchangeable side
magnetic plate
allows third axis
holding ability
• 25lbs of pull
• 2 5/16" x 2" x 7/8"
$1895
)HEWK7RWK
$1595
$4495
Save
30%
18" Flexible Snake Magnet
Save
33%
• Allows inside welds
on a single pass
• Inside corner relief allows
room for lips
• 3 1/4" x 3 3/4" x 5/8"
Reg. $29.99
STH-MST327
$21
$13995
$1295
Reg. $22.99
STH-UDV65
Reg. $22.99
STH-MST348
Outside
Corner Clamps
95
)HEWK7RWK
Save
35%
Reg. $19.99
STH-UDV45
Reg. $99.99
STH-UM125C3
95
$1195
1495
Heavy Duty 4-in-1
Sliding Arm Clamps
)HEWK7RWK
)HEWK7RWK
)HEWK7RWK
$19
95
• 2 magnets connected by a flexible cable
• 13lbs of pull
• Convenient holding
of flat plates and
small tubes
• Includes spring clamp
Save
27%
Reg. $21.99
STH-MFC318
$1895
)HEWK7RWK
$1595
9
WELDING
10 kmstools.com
Locking Pliers
Sa
up ve
to 50%
Vise-Grip Locking "C" Clamps
LIFETIME WARRANTY
Sale
Reg.
4" Swivel Pad
VIS-4SP
6" Solid Pad
VIS-6R
6" Swivel Pad
VIS-6SP
11" Solid Pad
VIS-11R
11" Swivel Pad
VIS-11SP
18" Solid Pad
VIS-18R
18" Swivel Pad
VIS-18SP
18" Deep Solid Pad
VIS-18DR
24" Solid Pad
VIS-24R
24" Swivel Pad
VIS-24SP
95
$12
95
$18.99 $12
95
$19.99 $12
95
$24.99 $19
95
$26.99 $19
95
$49.99 $34
95
$49.99 $34
95
$55.99 $39
95
$39.99 $39
95
$44.99 $39
$18.99
3-DAY SALE
$995
$995
$995
$1595
$1595
$2995
$2995
$3495
$3695
$3695
Vise-Grip Locking Panel Clamps
LIFETIME WARRANTY
Sale
3-DAY SALE
$1995
$1995
$1895
$1895
Reg.
9" Solid Pad
VIS-9R
$34.99
9" Panel Pliers
VIS-9AC
$38.99
3pc Locking Welding Clamp Set
• Includes one 11" locking C clamp
and 2 welding clamps
Reg. $20.99
RRT-00416
$1595
Save
24%
Vaper Magnetic Holders
Save
49
44%
25 LB
TTN-41291
50 LB
TTN-41292
75 LB
TTN-41293
Strong Hand Jointmaster
Corner Joining Pliers
• Fast, precise single handed
corner joining tool
• Can be adjusted for varying thicknesses
3/4" Capacity
Reg. $26.99
STH-PL622
$1995
1 1/4" Capacity
Reg. $32.99
STH-PL634
$2495
Save
up to
26%
$2
Reg. $4.49
$349
Reg. $5.49
$449
Reg. $6.49
Strong Hand Heavy Duty
Corner Clamps
7" Corner Clamp
• 4 3/4" jaw length
• 1 3/8" jaw height
Save
up to
41%
Reg. $119.99
STH-WAC34
$7995
)HEWK7RWK
$6995
9.5" Corner Clamp
• 5 3/8" jaw length
• 2 1/2" jaw height
Reg. $159.99
STH-WAC45
$12995
)HEWK7RWK
$11995
up to
WELDING
Lincoln Flux 1lb Spool
Save
up to
GREAT FOR SMALL PROJECTS
43%
• Versatile flux wire that is easy to use
• Easy slag removal
• Works well outdoors
• E71T-11
0.030
0.035
Reg. $14.99
LNC-ED031448
95
$9
February 2014 11
AVAILABLE .023, .030 OR .035
• For welding low-carbon steel plates, tubing,
piping, structural members, steel castings,
pressure vessels, etc
• Commonly used to weld
dirty or rusty materials
with minimal pre-cleaning
Reg. $9.99 - $10.99 ea.
BLU-38978323 .023
BLU-38978330 .030
BLU-38978335 .035
Save
Reg. $27.99 - $32.99 ea.
BLU-38977823 .023
BLU-38977830 .030
BLU-38977835 .035
up to
27%
Century 240V Welders Extn. Cord
PLUGS GLOW WHEN LIVE FOR WORK SAFETY
• Heavy duty 8/3 wire good to 50 amps
• Tough water and fire
3 DAY SALE
resistant cover
25 FT
50 FT
CWC-D13308050
Save
27%
Blueshield 11lb ER70S-6
MIG Welding Wire
AVAILABLE .023, .030 OR .035
CWC-D13308025
.030 ER5356
.035 ER5356
.030 ER4043
.035 ER4043
$795ea.
95
Blueshield 2lb ER70S-6
MIG Welding Wire
$795ea.
AVAILABLE .030 OR .035
Reg. $10.99 ea.
BLU-20456108
BLU-20456109
BLU-20443108
BLU-20443109
Reg. $13.99
LNC-ED027641
$7
Blueshield 1lb ER5356/ER4043
Aluminum Welding Wire
$8995
$7995
Reg. $119.99
95
$149
95
$139
Reg. $199.99
$2695ea
Century Wire Welder
Plug Adapter
• Plug your 3 prong 30 amp welder
plug into your dryer receptacle
• 10/3 Gauge, 5' long
Reg. $34.99
CWC-D13310005
$2795
Save
)HEWK7RWK
$60
$2495
up to
Save
28%
Many more to
choose from
WHY LEASE GAS CYLINDERS?
Buy your brand new gas cylinders at KMS Tools and SAVE Money!
We'll fill YOUR cylinder while you wait, and return it to you.
Don't be stuck with someone else's cylinder!
We're an Air Liquide Depot
O2 / MIG Gas
Reg.
20 Cu Ft
BOT-O220
BOT-AR20
$139.99
55 Cu Ft
BOT-O255
BOT-AR55
$229.99
80 Cu Ft
BOT-O280
BOT-AR80
$249.99
110 Cu Ft
BOT-O2110
BOT-AR110
$269.99
250 Cu Ft
BOT-O2250
BOT-AR250
$359.99
Sale
$9995
$19995
$21995
$22995
$31995
Save
up to
$40
We stock CO2, N2, O2, Ar, Ar/CO2, & Tri Mix
Selection varies by location
WELDING
12 kmstools.com
Lincoln 2450 Viking
Welding Helmet
Lincoln Heavy Duty
Save
Leather Welding Jacket $40
• Adjustable shade from
DIN #9-13, plus grind mode
• 4 independent arc sensors,
1/25,000 speed
• 5 Amp TIG rating
• Adjustable delay and
sensitivity
• 2 7/16" x 3 7/8" viewing area
• Solar powered with
replaceable battery
• Heavy duty split cowhide
leather chest and sleeves
• Cotton back to keep you cooler
• Flip up collar for extra protection
• Large inside pocket for protected storage
Reg. $129.99
LNC-K2989M to
LNC-K298XL
$9995
)HEWK7RWK
$8995
Reg. $299.99 ea.
LNC-K30281 Black
LNC-K30291 Heavy Metal
LNC-K30991 Graveyard
$19995ea.
Save
$110
)HEWK7RWK
$18995ea.
Miller Digital Elite Welding Helmet
BLACK, INFERNO OR VINTAGE ROAD
• Four modes - Weld DIN #8-13, CUT DIN
#5-8, Grind DIN3.5 and X-Mode
• 4 independent arc sensors,
1/20,000 speed
• 5 Amp Tig rating
• Digitally adjustable
sensitivity & delay
• 2 3/8" x 3 7/8" viewing area
• Auto on/off
DARK BLUE - MED TO XXL
Save
$70
• Lightweight
• Durable cotton
Reg. $39.99
MEP-244750 to
MEP-244754
$2495
Reg. $369.99 ea.
MEP-257213 Black
MEP-257217 Inferno
MEP-259485 Vintage Rd.
)HEWK7RWK
$29995ea.
$1995
Miller Digital Pro-Hobby
Welding Helmet
Lincoln Welding Beanie
BLACK
• Two modes - Weld DIN 8-13, Grind DIN3.5
• 2 independent arc sensors, 1/20,000 speed
• 20 Amp Tig rating
• Digitally adjustable
sensitivity & delay
• 1 7/8" x 3 7/8" viewing area
• Auto on/off
Save
$70
Reg. $219.99
MEP-256166
$15995
$14995
CARBON FIBER GRAPHICS
• Adjustable shade from DIN #
9 - 13, plus grinding mode
• 3.86" x 2.17" viewing area
• Adjustable delay & sensitivity
• Solar powered with
replaceable batteries
$7995
LARGE & XL
• 100% flame retardant
material
Reg. $3.69
LNC-K2994L to
LNC-K2994XL
$249
WE STOCK A FULL
SELECTION OF
WELDING BEANIES
)HEWK7RWK
Tekz Large Window Auto
Darkening Welding Helmet Save
Reg. $109.99
TTN-41262
Miller Light Duty
Flame Resistant
Welding Jacket
$40
Lincoln Leather
Welding Apron
• Heavy split cowhide
• Adjustable harness
for proper fit and
weight distribution
• One size fits all
Reg. $42.99
LNC-K3110
$4295
)HEWK7RWK
$6995
KMS Tools carries over 20 Styles and 9 classes of helmets!
Save
32%
WELDING
Watson Welding Gloves
• Soft, heat resistant leather
• Fully lined 5 finger glove
Reg. $7.99
WG-2756R
Save
38%
February 2014 13
Miller Metalwork Gloves
M • L • XL
• Padded palm and back
• Kevlar sewn
Reg. $24.99
MEP-251066 to
MEP-251068
$595
Save
36%
$1795
)HEWK7RWK
$495
)HEWK7RWK
$1595
Lincoln TIG Welding Gloves
M • L • XL
• Excellent fit and dexterity
• Supple goat skin leather
• Kevlar sewn
Reg. $22.95
LNC-K2981M to
LNC-K2981XL
Save
34%
$1695
)HEWK7RWK
$1495
Miller MIG Gloves
M • L • XL
• Genuine Deer and Pig split leather
• Moisture wicking fleece insulation
• 100% Kevlar sewn
• Padded, reinforced palm
Save
43%
Reg. $34.99
MEP-249172 to
MEP-249174
$2495
)HEWK7RWK
Watson Tigger Welding Gloves
$1995
S • M • L • XL
• Deer skin
• Kevlar stitched
Reg. $13.99
WG-2755S to
WG-2755XL
$995
Save
28%
Fabulous Fabricator Welding Gloves
M • L • XL
• Premium grade steer hide
• Welted seams for
superior strength
Reg. $10.99
WG-2757M to
WG-2757XL
4-n-1 Pipe Pro Cutting Guide Kit
• Contains three metal templates,
for 1 7/8, 2 3/8 and 2 7/8" pipe
• Each template creates four
different cutting guides, at 45o,
90o, 22.5 o and saddle cut.
• Saves time and creates
better fit
Reg. $39.99
TEC-MEKIT
$2495
Save
37%
$795
24oz 6x6 Welding Blanket
Save
27%
Wrap-A-Round Pipe Layout Roll
BY CURV-O-MARK
• Measures 6" - 16" pipe
• Makes layout easy
• 5" W x 9' L
Reg. $29.99
WA-179B
$1995
Save
33%
• 24 oz gold, acrylic coated fiberglass
• Medium duty spark, spatter,
abrasion resistance
• 1000o F melt temperature
rating
Reg. $89.99
-590B66
TEC-590B66
$44
495
METALWORKING
14 kmstools.com
Cut It...
Magnum Swivel Head,
Geared Head Bandsaw
7" X 10 1/2" RECTANGULAR CAPACITY AT 90o
• 1 HP motor, 60Hz, 120V
• Cutting fluid tank and pump
for prolonged blade life
• 3 speeds: 125, 215 and 270 FPM
• 0-45o miter scale, with 4 auto
settings at 0o, 15o, 30o and 45o
• Uses 93" long x 3/4" high blades
• Use GRA-XDCA104L water soluble
cutting fluid
Reg. $1799.99
MAG-UE712SG
)HEWK7RWK
$162995 $159995
Save
$200
Compare
at $2300 !
Magnum 4" x 6" Horizontal Bandsaw 93" Bi-Metal Bandsaw Blade
• Powerful 6.3 amp motor ,120V
• 4 1/2" round cutting capacity at 90o
• Uses 64.5" x 1/2" bandsaw blades
• Includes small
table for
vertical
position
sawing
• 93" x 3/4" x 8/12 variable tooth
Reg. $45.99
BSB-9334812VBM
$3695
Other tooth
counts available
Reg. $342.99
MAG-MCBS46
$29995
Olson 64 1/2" Bandsaw Blade
CARBON STEEL
Save
$43
• Wavy cut teeth
• Fits our MAG-MCBS46, KC129C & KC-129DS bandsaws
Save
26%
Reg. $18.99
OLS-71764
King Industrial 5"x6" Metal Bandsaw
DUAL SWIVEL HEAD MITRE CUTTING BANDSAW
• 3 speed, 8 amp, 110V, 1/2HP motor
• Head swivels
0o - 45o right and
0o - 60o left
• Adjustable hydraulic
down feed control
• Auto shut-off
Save
$55
Other tooth
counts available
64 1/2" Bi-Metal Bandsaw Blade
10 - 14 TPI VARIABLE PITCH
• 64 1/2" long, 1/2" wide
Reg. $734.99
KC-129DS
$67995
$1395
Reg. $30.99
BSB-6451014VBM
Best Small
Band Saw!
Save
22%
$2395
Other tooth
counts available
A-10 Coolube Concentrate - 4L
Magnum 12"
Hand Shear
• Cuts 1/2" round steel
bar by use of hole through
upper blade,and 1/8" flat
steel bar
Reg. $159.99
MAG-HS12
$12995
)HEWK7RWK
$119
95
Save
$40
• Water soluble cutting oil
• Suitable for all operations
calling for water base oils and
lubricants, including saws,
mills, lathes, drills, and
stampers
• Mix 1:20 with water
• Milky white color
Reg. $36.99
GRA-XDCA104L
95
$29
MADE IN
CANADA
20L Pails also available
METALWORKING
February 2014 15
Bend It...
Magnum 52" 3-In-1
Shear, Brake, Slip Roll Machine
• 16 Ga capacity
• 9 removable fingers from
1" - 15" for box/pan work
• 3" slip rolls with forming grooves
• Includes 2 handles
and back gauge
Save
$300
)HEWK7RWK
Reg. $2099.99
MAG-3IN11320A
$179995
$182995
JD Squared Pipe
& Tubing Bender
• Mechanical mandrel style
tubing, pipe and square
tubing bender
• Bends up to 2" round
tube, with up to
1/8" wall
thickness, 1 1/2"
square tube and
1 1/2" schedule 40 pipe
• Accurately bends 180o
• Die sets, pumps, hoses and
stand sold separately
Reg. $399.99
JDS-100155
MADE IN
USA
95
$349
Combines 3 Machines into
1 Frame, Saving Valuable
Shop Space and Money!
Exclusive
Canadian
Dealer
Save
$50
Magnum 48" Box/Pan Brake
Magnum Universal Bender
• 16 Ga mild steel capacity
(20 Ga stainless steel)
• 16 removable fingers from
2" - 4" wide
• Includes multiple radius dies
• Bends up to 120o
• Bends up to 3" wide by 1/2"
thick, on cold steel
• Bends up to 4" wide by 5/8"
thick flat bar (when heated)
Reg. $899.99
MAG-W15X1220A
95
$729
)HEWK7RWK
$69995
Save
$200
Save
$31
Reg. $230.99
MAG-UB100
$20995
)HEWK7RWK
$19995
Magnum
Manual
Tubing Roller
• Includes dies for 1 1/4",
1 1/2", 1 3/4" & 2" round
outside diameter tubing
• Optional dies are available
for 1" round tube, 3/4"
square tube and 1"
square tube
Reg. $1199.99
MAG-TR50
)HEWK7RWK
12 Ton Portable
Hydraulic
Pipe Bender
INCLUDES 6 DIES
Save
$300
$93995 $89995
Magnum 24" Box/Pan Brake
• 20 Ga capacity in mild steel
• 1", 2", 3", 8", and 10" segments
Reg. $429.99
MAG-W10X610A
$32995
Save
$100
• Bends 1/2", 3/4",
1", 1 1/4", 1 1/2"
and 2" pipe
• Ram has 9 1/8" stroke
Reg. $178.99
TBR-TA1202
$11995
Save
$59
Magnum Compact
Bench Mount Bender
o
• Bends multiple radii, up to 200
• Includes dies for 1"-3" diameter,
and a sharp angle die
• 1/2" square and round bars
• 1/4" x 2" flat bars
Reg. $109.99
MAG-YP9
$8495
Can be used with
MAG-4046 Scroll
Making Attachment
Save
$25
METALWORKING
16 kmstools.com
Shape It...
Magnum Bead Roller
18 GAUGE CAPACITY
• Throat size: 18"
• Creates stiffening ridges and
finishing edges on sheet metal
• 6 Sets of dies, 3 sizes of beading,(1/4", 3/8"
and 1/2") & 3 sizes flanging, (18, 20, & 22 Ga)
Reg. $199.99
MAG-BR
$14995
)HEWK7RWK
$12995
Save
$70
Magnum 28"
English Wheel
• 28" throat
• 18 Ga capacity
• Includes 6 lower
forming wheels
and upper rolling
wheel
• Includes stand
• 75kg
Reg. $659.99
MAG-EW710
$56995
Save
$90
General Belt &
Disc Sander
• 1 1/2 HP, 110V/220V
motor
• 6" x 48" belt
& 12" disc
• Cast iron disc plate
• Belt lifts up to 90o
• Includes mitre gauge
Ma
Magnum
HHVAC
Rotary Machine
22 GA CAPACITY
• 7" throat
• Does wiring, crimping, ogee bead,
single bead and bellow edging
• Includes five sets of dies and
clamp-on, offset base
Reg. $1299.99
GEN-15035M1
$99995
Save
$300
Reg. $499.99
MAG-RM08
e
$29995 Sav
$200
Baileigh Planishing Hammer
Eastwood Shrinker/Stretcher Kit
COMPLETE WITH
9 LOWER ANVILS!
• 18 Ga capacity
• One set each, shrinker jaws and
stretcher jaws
• Longer handle for bett er leverage
when working
ng with heavier
gauged metals
tals
• 16 Ga mild steel capacity
• Air operated, up to
4600 blows per minute
• 4" x 4" welded steel frame
• Includes filter, oiler, and
foot pedal
• Hardened steel
hammer head
• 24" throat
Reg. $249.99
EAST-50143
$17495
Reg. $869.99
BAI-PH24A
Save
$75
95
$799
Reg. $199.99
MAG-W108X305
$15995
$74995
Save
$120
Magnum 12" Slip/Roll Machine
• 20 Ga capacity
• Precision ground cast iron collar
• Quick release top roller
• Hardened steel gearing
• 3 grooves for wire rolling
• Mounts on edge of bench
)HEWK7RWK
Magnum 36" Slip/Roll Machine
Save
$40
16 GAUGE SHEET METAL CAPACITY
• Heavy duty construction
• 50mm diameter rolls
• Adjustable back roller
• 3 Grooves for rolling 1/4" 3/8"
and 7/16" rod
Reg. $549.99
MAG-W0115X915
$47995
Save
$70
METALWORKING
February 2014 17
Mill & Lathe It...
King Industrial 3/4" Bench-Top
Mill/Drill Machine
King Industrial 1 1/4"
Mill & Drill Machine
TILT HEAD, GEAR HEAD,
DOVETAIL COLUMN!
• 2HP, 220V motor
• Includes: 3" face cutter, 1/2" chuck
with key and 3 1/2" angle vise
• Distance between spindle
nose and table 18 7/8"
• 16 1/2" swing
• R8 spindle taper
• 5pc accessory kit
• Line interruption
switch
• 1HP, 120V DC motor
• Spindle depth and
spindle RPM digital
readouts
• Head tilts 90° right & left
• 7 1/16" x 27 1/2" table
• Includes R-8 spindle, with
1/2" chuck,
safety
guard and
2 T-bolts, adjustment
wrenches, hex keys and toolbox
Save
$150
Reg. $2255.99
KC-PDM30
$164995
Reg. $1599.99
KC-20VS
Save
$606
$144995
Save $20 on the Stand
Save $20 on the Stand
• Includes drip tray
• Fits KC-PDM30 & KC-45
Reg. $209.99
KC-SS20VS
Reg. $209.99
KC-SS45
$18995
$18995
Magnum 58pc
Machinist's Clamping Set
Magnum Milling Vise
• Clamp pieces to your mill or drill press table
• Includes storage case
3/8"
• 3/8" Bolt,
1/2" T-Slot
Save
up to
$5295
Reg. $68.99
23%
MAG-CS5838
• Swivel base has degree ring
• Great accessory for small milling job
4" Jaw
MAG-PL100
$13995
Reg. $162.99
Save
up to
$40
6" Jaw
Reg. $209.99
MAG-PL160
1/2"
$16995
• 1/2" Bolt, 5/8" T-Slott
Reg. $71.99
MAG-CS5812
$5695
King Industrial 12"x36" Metal Lathe
INCLUDES METAL STAND
King Industrial 10"x22" Metal Lathe
NEW IMPROVED SWITCH SYSTEM!
• 1HP, 120V, 12A motor
• 22" between centers 10" diameter swing
• Line interruption electromechanical switch
and safety guard with limit switch protection
• Spindle speeds from 150-2400 RPM
• Includes 5" three jaw chuck, 6 1/2"
four jaw chuck and 8" face plate
• Thread cutting 8-72 TPI
• Includes SAE and metric gears
Reg. $2099.99
KC-1022ML
$192995
Save
$170
• 1 1/2 HP, 220V, 60Hz motor
• 12" swing over bed (18" over gap)
• 36" between centers
• 1 1/2" spindle bore
• Includes 6" 3 jaw chuck, 8" 4 jaw chuck,
imperial and metric gears, quick change
tool post, steady rest, follow rest, 10"
DI-4 camlock face plate, thread chasing dial
indicator, MT#3 dead center, MT#3 arbor
taper, 1/2" drill chuck, full length splash
guard, tool box, chuck keys and hex keys
Save
$200
Reg. $3599.99
KC-1236MLSS1236
$339995
18 kmstools.com
Vacmaster Wet Dry
10 Gallon HEPA Vac
HEPA CERTIFIED 99.97%
EFFICIENT ON 0.3 MICRONS
• 2 stage industrial motor
• Powder coated
stainless tank
• Max 106" waterlift
• Max air flow of 125 CFM
• 30' power cord
Reg. $349.99
CLV-VK1011SIWTH
95
$299
Save
$70
)HEWK7RWK
$279
95
SHOP EQUIPMENT
2 1/4 Ton Floor Jack
HEAVY DUTY
• Lift range: 5 1/2" - 18 5/8"
• Steel frame
Reg. $89.99
TBR-T82258
Save
27%
95
$69
)HEWK7RWK
$6495
Performance Tool Heavy Duty
3 Ton Floor Jack
Save
$50
RAPID LIFT
• Lift range: 4 5/8" - 20"
• 3 pumps lifts to full height
• Conforms to ANSI standards
Vacmaster Wet Dry
12 Gallon Blower Vac
Reg. $189.99
WIL-W1616
$14995
DETACHABLE BLOWER
• 5 peak HP motor
• 12 polypropylene tank
• Max air flow of 125 CFM
• 12' power cord
• 2 year warranty
)HEWK7RWK
$13995
Reg. $149.99
CLV-CVBV1210
$12995
Save
$30
)HEWK7RWK
$119
95
Magnum Heavy Duty
Jack Stands
WITH LOCKING SAFETY PIN
Sa
up ve
to 50%
• Constructed out of welded steel
• Features a ratchet and pin safety design
• Remains locked under load
3 Ton
Magnum 4 Ton Porta Power Kit
• Includes pump, hose, connectors,
ram, multiple heads and case
• Heads: serrated saddle,
rubber head, spreader plunger
toe, 90o V-base,
flat base, spreader
and wedge head
Reg. $164.99
TBR-T70401
$9995
Reg. $39.99
TBR-T43001C
$2495
)HEWK7RWK
$1995
6 Ton
Reg. $64.99
TBR-T46001C
$3995
)HEWK7RWK
$3495
Save
$65
All Erickson Tie Downs
and Accessories
Accessor
37%F
Up
To
OF
KMS Tools carries a full range of straps for heavy duty applications
SHOP EQUIPMENT
CTEK 3.3 Amp Battery Charger
BEST CHARGER FOR YOUR BATTERY
• Fully automatic switches
to maintenance mode
• 3 charge levels: motorcycle,
car and winter mode
• Reconditioning to desulfate
• The charger analyzes the state
of your batt ery and recovers
the batt
ery its power
ttery
February 2014 19
Magnum Hand Trucks
440LB CAPACITY
• 10" Pneumatic tires
Reg. $69.99
MAG-HT1805
95
$49
)HEWK7RWK
$3995
600LB CAPACITY
• Large 13" pneumatic tires
• Heavy duty powder coated frame
Reg. $74.99
9
581
CTEK-561581
$6999
Reg. $79.99
MAG-HT2400
$5995
)HEWK7RWK
$4995
Save
up to
CTEK Multi US 25000
Battery Charger
42%
• 25A max
• 8 step fully automatic charger with pulse
maintenance
• Weather resistant
nt
(IP44 Rating)
• 2 year warranty
CTEK-56674
$29999
Magnum Platform Service Carts
• 300lb capacity
• 4" solid rubber tires
• Easy fold down handle
Save
36" X 24"
46%
29" X 18"
Reg. $64.99
MAG-PH150
$3995
B&D Smart 4/15/30/50 Amp
Charger With Boost
up to
Reg. 89.99
MAG-PH300
$6995
)HEWK7RWK
$5995
)HEWK7RWK
$3495
150 AMP BOOST
• Desulfates tired batteries
• More efficient charging than
conventional chargers
• Alternator check
• Light weight
• 5 year warranty
Astro Pneumatic 2 Tray Service Cart
300LB CAPACITY
Reg. $230.99
BLA-BL50EB
• 18"W x 32"L x 31"H
• Heavy duty molded
plastic that never
dents and never rusts
• 4" casters
$19995
Save
$31
Reg. $129.99
AP-8330
$8995
Magnum Parts Washer
• Includes pump & flex hose
• Fire safety fusible link on lid
• Removable work shelf
5 Gal
Reg. $76.99
20 Gal
$13995
MAG-PW20
40 Gal
MAG-PW40
up to
$16995
$4995
$12995
$15995
Reg. $209.99
• Durable polypropylene bristles
$695
$50
Reg. $164.99
Parts Cleaning Brush
Reg. $10.99
KD-242
Save
3 DAY SALE
$5995
MAG-PW5
Save
$40
Save
36%
Recochem Parts
Washing Solvent
• 5 gallons, steel
drum, low odor
Reg. $69.99
PETRO-SOL
$5995 Save
$10
SHOP EQUIPMENT
20 kmstools.com
Magnum Bench Grinder
General 6" Bench Grinder
• 3450 RPM
• Includes guards, tool rests
and grinding stones
LOW 1750 RPM FOR SHARPENING WOOD
TURNING AND FINISHING CHISELS
6" GRINDER
• 1/2 HP
8" GRINDER
• 3/4 HP
Reg. $69.99
MAG-RBG625
Reg. $99.99
MAG-RBG825
$4995
$7995
• 1/3 HP, 110V
• Goose neck working light
• Includes 2 wheels,
36 and 60 grit
)HEWK7RWK
$6995
Reg. $119.99
GEN-15625M1
$9995
Save
$20
)HEWK7RWK
$4495
Save
up
Magnum Bench
Grinder Stand
to
35%
• Includes cups for spare wheels
and coolant tray
• Height: 28"
Baldor 6" Bench Grinder
Reg. $69.99
MAG-BGS1
MADE IN
USA
• 3600 RPM industrial motor
• Includes grinding stone and wire wheel
• Cast iron
ron guards
• Exhaust
st gate
Save
$30
Reg. $249.99
49.99
2RE
BAL-602RE
95
$219
$4495
)HEWK7RWK
$3495
All Bench Grinder
Wheels
Master Quality 8" Bench Polisher
• 3450 RPM
• 1/2 HP
• 1/2" Shaft
• Includes wheels
Reg. $157.99
MAST-PT20008W
)HEWK7RWK
$9995
Save
$58
$11995
25%
OFF
BW-611W60 TO BW-811W120
All Buffing Wheels
25%
OFF
DIC-1400D4 TO DIC-1404D10
Baldor 6" Polisher
• 1/3HP, 110V
• 3600 RPM
• 1/2" Shaft
Reg. $309.99
BAL-111
$27995
Save
$30
MADE IN
USA
All Buffing Compounds
FOR FERROUS & NON-FERROUS METALS
Up
To
42% OFF
BUF-BLACK to BUF-WHITE339
TOOL BOXES
February 2014 21
All new selection of Bynford Pro
Tool Boxes in stock now!
Too many to
list here!
Come in and
check them out!
Including the
new Classic
Series Model!
Up To
25% OFF
Bynford Pro 19" Portable Tool Box
• 19"W x 6"D x 6 1/2"H
• Heavy duty powder coat finish
• Includes lift out tray
Reg. $17.99
TBR-TBH101
$8
95
CTA Socket Holders
• Incl. spring loaded bearing
1/4" SAE
• 1/8" - 5/8"
3/8" SAE
• 1/4" - 1"
Reg. $6.99
CTA-9720
Reg. $6.99
CTA-9730
$395
$395
1/2"" SAE
• 3/8" - 1 1/4""
Sa
Reg. $13.99
CTA-9750
up ve
to 50%
95
$6
Stanley Parts Bins
Stanley Parts Bin Sets
MEDIUM
• 7 7/8" x 12 7/8" x 6 1/8"
LARGE
• 12 1/8" x 16 7/8" x 7"
Reg. $6.99
ST-056400L
Reg. $11.99
ST-056500L
$395
Save
up to
43%
$795
• Includes wall mounting rack
• Unique lock-in stacking
4PC
8PC
Reg. $14.95
ST-057304R
Reg. $17.99
ST-057208R
$995
$895
Sa
up ve
to 50%
Delta Crossover Truck Bed Storage
age Box
• Gear-Lock self-adjusting dual rotary locking
cking system
always latches and closes for superior security
• Will Resist up to 2000 lbs of break in force
orce
• Built-in storage bin on both ends and
4-compartment sliding tray for
convenient hand tool and small
item storage
Reg. $469.99
DELT-PAC1580000
$41995 Save
$50
Metric
sizes also
available
22 kmstools.com
CAR 4:1 Clear Coat Kitt
• Includes activator
• 4:1 Mix ratio
• 2.1 VOC
Reg. $99.99
CAR-200795
$5995
Save
$40
AUTOBODY
Dura-Block 6pc
Sanding Block Kit
• Includes standard block,
1/3 block, 2/3 block, round block,
and two scruff blocks
• Accurately block sand slightly
curved or flat panels on any car
without digging into fill material
Reg. $76.99
DEK-AF44A
$4495
Save
41%
Eastwood Internal
Frame Coating
• Zinc phosphate seals it to
prevent future corrosion
• 24" Long tube with conical
nozzle reaches in to spray
coating in a radial pattern
for complete coverage
• Covers 10 sqft per can
• Fully cures in 24 hours
Reg. $20.99
EAST-12515Z
$1995
Eastwood Internal
Exhaust Coating
• Lowers underhood and
under car temperatures
• Thermal coating
withstands up to
1800o F
• 24" Long, 360o aerosol
extension nozzle for
easy application
Reg. $20.99
EAST-13795Z
$1795
AVAILABLE
INDIVIDUALLY
Wax & Grease Remover
• Strips wax, grease and glues
from car paints, without
harming the finish
• 3.78L
Reg. $22.95
USC-12401
$1795
Save
21%
USC Icing Polyester
Finishing Putty
• Exceptionally
easy to sand
• Self leveling to provide
feather edging
• 700ml
Reg. $29.99
USC-26006
Eastwood Satin Black
2k Ceramic Chassis Paint
$1995
• 2 Component performance
from an aerosal can
• Nano ceramic technology long
lasting durable finish
Reg. $27.99
EAST-14146Z
$2495
CAR 2K Aerosol
High Build Primer
• 400ml
• Actual 2 component
primer in an aerosol can
Grey 2K Epoxy Primer
• Precision of a two component
coating without the paint gun
Reg. $24.99
EAST-14149Z
$2195
Reg. $29.99
CAR-2047040
$995
Save
66%
Save
33%
February 2014 23
Festool 6 1/4" Plunge-Cut Saw
Festool Angle Unit
INCLUDES 55" RAIL
• Quickly and accurately set
angles for cutting or routing with
the Festool FS guide rails
• Ideal for making
angled or even
compound cuts
in sheet goods
• 10 amp motor with variable speed,
soft start, constant speed control,
thermal and overload protection
• Retractable
riving knife
FES-561556
$660
FES-491588
$9870
GUIDE RAIL
NOT INCLUDED
Parallel Guide Set
For Plunge-Cut Saws
• Allows for accurate repeatable rip and
cross cuts with a Festool Plunge-Cut saw
• Attain similar results to what would
normally require a sliding panel saw
but with complete portability
• Any size guide rail
can be used
FES-P00108
$367
Festool Plunge-Cut Saw
Accessory Kit
• Includes angle unit, limit stop,
replacement splinterguard (1400
mm), hose and cord deflector, two
guide rail connectors, and two screw
clamps,
in a Systainer
FES-497657
$226
GUIDE RAIL
NOT INCLUDED
Festool Guide Rails
55"
118"
FES-491498
$130
FES-491501
$367
Festool Guide Rail Connector
TWO ARE NEEDED
FES-482107
$18
6 1/4" Saw Blades
14T Panther
FES-495372
$51
28T Universal
FES-496304
$56
48T Fine
FES-495377
$79
56T Aluminum/Plastic
FES-496307
$101
Festool CT 26 Dust Extractor
137 CFM
• 6.9 Gal capacity
• HEPA Rated filter
• Quiet at only 62 dB
• Integrated systainer dock
• Foot brake
• Automatic tool start and
adjustable suction
• Anti-static hose
• Water level sensor
FES-583492
$671
POWERTOOLS
24 kmstools.com
Nothing but HEAVY DUTY.
18V Li-Ion 2pc Combo Kit
COMPACT SERIES
• Includes 1/2" drill (425 in/lbs), impact driver
(1400 in/lbs), two batteries, charger and case
Reg. $279.99
MILW-269122
$19995
Save
$90
35pc Impact Rated
Bit Set
• Designed to flex and
last up to 10x longer than
conventional
bits
Reg. $39.99
MILW-48324402
$2795
)HEWK7RWK
$18995
)HEWK7RWK
$2495
Save
37%
Li-Ion 12V-28V Jobsite Radio
18V Li-Ion 2pc Combo Kit
• Includes 1/2" hammer drill (550in/lbs),
impact driver (1400 in/lbs), two full
size batteries, charger and case
Reg. $449.99
MILW-269722
Save
$29995 $170
70
• Auxiliary port for CD Players, MP3
Players, and portable satellite receivers
• Weather sealed auxiliary
compartment protects
MP3 players
• Shock absorbing
construction
Reg. $199.99
MILW-279020
$10995
Save
$90
)HEWK7RWK
$2779995
F
FUEL
18V Brushless
IImpact Driver
TOOL ONLY
T
• 3 mode torque settings:
• 200, 700, and 1600 in/lbs
Reg. $179.99
MILW-265320
$$12995
Save
$50
Non-Brushless version
$99.95 MILW-265020
FUEL
EL 18V LLi-Ion
Circular Saw
FUEL 18V Li-Ion 5"
Angle Grinder
TOOL ONLY
TOOL ONLY
• Brushless motor
• Magnesium shoe
• 50° bevel
• Brushless
motor
• 8500rpm
• Lock-on switch
MILW-273020
MILW-278120
FUEL 18V Li-Ion Sawzall
TOOL ONLY
• Brushless motor
• 0-3000spm
• 1 1/8" blade stroke
MILW-272020
Save Your
$70 Choice
Reg. $249.99 ea.
$17995ea.
Non-Brushless versions
$109.95 to 139.95
MILW-263020, MILW-262020, MILW-268020
POWERTOOLS
Bosch 1/2" 18V Li-Ion
Cordless Drill
February 2014 25
Bosch 18V Li-Ion 2pc Combo Kit
• 400 in/lbs of torque
• 2-speed gearbox
• Compact at only 7.6" total length
and weighs just 3bs
• Incudes 2 batteries and charger
g
Save
$70
Reg. $179.99
99
B18002
BOB-DDBB18002
• Includes 1/2" hammer drill/driver (700
in/lbs), impact driver
(1280 in/lbs), two 3ah
batteries, fast charger
• and case
Reg. $459.99
BOB-CLPK221181
$32995
95
5
$119
)HEWK7RWK
$10995
)HEWK7RWK
$31995
Save
$140
Makita 18V Li-Ion Multi Tool
TOOL ONLY, NO CASE
• Soft start, variable speed
• 6000-20,000SPM
• Low battery
warning light
• LED job light
Reg. $239.99
MAK-LXMT02ZKX1
Makita 18v Li-Ion
2pc Combo Kit
Save
66%
• Includes 1/2" hammer
drill/driver (750 in/lbs),
1/4" impact driver (1,420
in/lbs), two batteries,
charger and case
95
$89
)HEWK7RWK
LIMITED
QUANTITIES
$79
95
Reg. $459.99
MAK-LXT218X
$26995
)HEWK7RWK
$24995
Makita 18v Li-Ion
1/2" Drill/Driver
TOOL ONLY
• 4 pole motor
• 480 in/lbs torque
Reg. $149.99
MAK-LXFD01Z
$4995
Save
66%
LIMITED
QUANTITIES
Makita 18V Li-Ion LXT
6 1/2" Circular Saw
Makita 18V Li-Ion
1/4" Hex Tool
TOOL ONLY
TOOL ONLY
• 2 1/4" max cutting depth
• 1420 in/lbs of torque
Reg. $159.99
MAK-BSS611Z
Reg. $149.99
MAK-LXDT04Z
$7995
$7995
Save
$80
Save
70%
Save
$210
SPECIAL BUY
Limited quantities
POWERTOOLS
26 kmstools.com
Milwaukee 3/8" Drill
Milwaukee 1/2" Drill
• 8 amp motor, 0-2800 RPM,
reversible
• All metal chuck and
gear case
• Soft grip
handle and
2 finger trigger
• 8 amp motor
• 0-850 RPM, reversible
• Double gear reduction
• Metal
gear
housing
Reg. $159.99
MILW-029920
Reg. $79.99
MILW-024020
$5995
$9995
Save
25%
Save
$60
Irwin 6pc Speedbor Set
Makita 1/2" Drill
• Self feed tri-flute design
• Sizes 1/2", 5/8", 3/4",
7/8", 1" & 1 1/4"
• 6.5 amp motor, 600 RPM
• Reversible
• Heavy duty rocker switch
• Double gear reduction
• D-handle rotates 3600
Reg. $39.99
IRW-3041006
Save
37%
$2495
Reg. $199.99
MAK-DS4011
$14995
Bosch 3pc Mini Diamond
1/4" Hex Hole Saw Kit
3/16", 1/4" & 1/2"
Save
$55
)HEWK7RWK
$144
95
Reg. $59.95
BOA-HDGM
$3999
Bosch "Daredevil" 13pc Spade Bit Set
Makita 3/8" Angle Drill
• 4 amp motor
• 0-2400 RPM, reversible
• Built-in LED light
• 2 5/8" clearance
Reg. $259.99
MAK-DA3010F
Save
33%
Save
$40
• 1/4" - 1 1/2"
• Self feeding tip
• Contorted spade for
better chip clearing
• Includes pouch
Reg. $44.99
BOA-DSB5013P
95
$219
$1995
Metabo 6" Dual Orbit Sander
Makita 5" Random
Orbit Sander
• 3 amp motor
• 12,000 OPM
Reg. $99.99
MAK-BO5030
Reg. $299.99
MET-SXE450
$7995
$21995
)HEWK7RWK
$7495
Bosch 3 1/4"
Planer
• 6 amp Motor
• 33,000 CPM
Reg. $169.99
BOB-PL1682
Save
$12995 $50
)HEWK7RWK
$11995
Save
$25
• Powerful 3.4 amp motor with variable
speed (4,200 to 11,000 OPM)
• Multiple-purpose sander with
two sanding modes
• Random orbit mode for
normal stock
ock
removal or
fine finishing
ng
Save
$80
LIMITED QUANTITIES
Klingspor PS22 Velcro
Sanding Discs S
60 TO 320 GRIT
up
ave
60%
• Heavier backing
to
sanding disc for highh
stock removal
• Ideal for hard and soft wood
5" 8 HOLE 6" 6 HOLE
Reg. 69¢-89¢ ea. Reg. 76¢ ea.
KLI-89486 to
KLI-72624 to
KLI-90758
KLI-89656
35¢ea.
40¢ea.
POWERTOOLS
February 2014 27
Makita 7 1/4"
Circular Saw
MADE IN
ITALY
ELECTRIC BRAKE
"Renegade" 7 1/4"
24T Saw Blade
de
• 15 amp Ball-bearing
motor
• Built-in LED
Reg. $4.99
FRE-RE0724A
Reg. $149.95
MAK-5007FA
$295 Save
$12995
40%
)HEWK7RWK
$12495 Save
7 1/4" 24T Sawblade
$25
Milwaukee Reciprocating Saw
• 12 amp motor
• 1 1/8" stroke, 0-3000 SPM
• Gear protecting clutch
• Counter weighted
for reduced vibration
• Quick blade change
Reg. $139.99
MILW-651930
Save
$40
$9995
• Durable micrograin titanium carbide tips
• Laser-cut blade body
• Exceptional long life in ripping
and crosscutting
• Chrome finish
Reg. $13.99
FRE-DC724A
$995 Save
28%
Diablo Ultimate Finish Blade
• Axial Shear Face Grind (ASFG)
tooth geometry for flawless
cuts that require no rework
• Thin kerf design
10" 90T
Bosch 8 1/2"
Sliding Mitre Saw
VERY PORTABLE, WEIGHS JUST 37LBS
• 12 amp motor
• Large easy-to-read miter and bevel scales
• Adjustable front stabilizing foot
• Cross cut 12 1/4" at 0o, 8" at 45o,
2 3/4" upright, 3 1/2 crown
Reg. $419.99
BOB-CM8S
$36995
)HEWK7RWK
$349
95
Reg. $94.99
FRE-D1090X
$3995
Sa
up ve
to 57%
12" 100T
Reg. $99.99
FRE-D12100X
$3995
12pc Diablo Recip
Blade Set
Reg. $26.99
FRE-DS0012SC
$1795
Save
$70
Save
33%
Bosch 10" Axial-Glide Mitre Saw
NO NEED TO ACCOMMODATE RAIL TRAVEL
DeWalt 10" Compact
Jobsite Table Saw
• 15 amp Motor
• 16" Ripping capacity
• Rack & pinion fence
• Metal roll cage for greater durability
• Weighs 45lbs
Reg. $449.95
DEW-DW745
95
$299
Save
$150
LIMITED QUANTITY
• 15 amp motor
• Dual articulating arms with
sealed bearings provide
incredible accuracy and
smoothness of cut
• 12" Horizontal and 5 1/2"
vertical cutting capacity
• Squarelock quick-release
fence system
• Up front controls
Reg. $699.99
BOB-CM10GD
$61995
)HEWK7RWK
$59995
Save
$100
POWERTOOLS
28 kmstools.com
Hitachi 7/8" SDS
Rotary Hammer Drill
Bosch 1" SDS-Plus
Rotary Hammer Drills
• 5.4A motor, 0-1500 RPM,
6200 BPM
• 1.0 ft/lb of impact energy
• 2 modes: rotation only & rotary hammer
• 1300 RPM, 5800 BPM
• 2.2 ft/lbs of impact energy
• 3 modes: rotation only, rotary
hammer & chipping
Reg. $109.99
HIT-DH22PG
Pistol
$8995
• 7.2A motor
Reg. $339.99
BOB-11253VSR
95
$79
Save
up to
$160
D-Handle
If purchased
with $20
or more of
Bosch SDS
Bits!
• 7.5A motor
Reg. $349.99
BOB-11255VSR
Save
up
to
Your Choice
$30
$19995ea.
Metabo 1 1/8"
SDS+ Hammer Drill
• 7A motor, 0-1150 RPM,
0-4470 BPM
• 3.1 J of impact energy
• 3 modes: rotation only, rotary
hammer, and chipping
• Anti-vibration handles
)HEWKK7R
7RWK
WK
$18995ea
Bosch SDS-Max Demo Hammer
MADE IN
GERMANY
• 10A motor
• 1,350-2,800 BPM
• 5.6 ft/lbs impact energy
Reg. $419.99
BOB-DH507
$369
6995
Reg. $419.99
MET-KHE3250
$37995
Save
$50
)HEWK7RWK
$36995
Save
$50
Bosch 1 5/8" SDS-Max
Hammer Drill
Bosch 2" SDS-Max Hammer Drill
• 13A motor, 340 RPM,
2900 BPM
• 8.1 ft/lbs of impact energy
• 2 modes: rotary hammer and chipping
Reg. $799.99
BOB-11264EVS
• 14A motor, 250 RPM, 2500 BPM
• 13.3 ft/lbs of impact energy
• 2 modes: rotary hammer and chipping
Reg. $1399.99
BOB-11245EVS
$99995
SPECIAL ORDER IN
SOME LOCATIONS
$58995
Save
$400
)HEWK7RWK
$569
95
Save
$230
Bosch SDS-Plus Bits
3/16" OR 1/4"
Reg. $7.69 ea.
BOA-HC2011 3/16"
BOA-HC2041 1/4"
$395ea. Save
25 PK
$7995ea.
MADE IN
Bosch SDS-MAX
18" Bull Point
Reg. $29.99
BOA-HS1914
$1495
Bosch SDS-MAX
16" Flat Chisel
Reg. $26.99
BOA-HS1903
$1349
48%
GERMANY
MADE IN
GERMANY
MADE IN
GERMANY
SAFETY
February 2014 29
Savings You Can See
Bionic Faceshield
Livewire Sealed Eyewear
CSA APPROVED
CSA APPROVED
• Excellent optics,
increased visibility
• Easily replaceable
visor with dual
position choices
• Comfortably worn
with most goggles
and respirators
• Lightweight and
balanced
Reg. $40.76
UVEX-S8500
• Protection in extreme environments
• 10X longer-lasting anti-fog performance
• Foam-lined subfram offers maximum
comfort and gap-free seal around
the eyes to keep debris out
Reg. $26.99 pr.
UVEX-S2600D to
UVEX-S2608XP
$2195pr.
$2495
Clear, Grey
Shade 3.0
Shade 5.0
)HEWK7RWK
$1995
NorthGen Disposable
Coveralls
• CE Type 5 & 6 protection resistant to noxious dust
and splash
• Breathable material
• 2-way zip, storm flap and a
generous cut
Reg. $6.39 ea.
NTH-35596M to
NTH-35596XL
Save
22%
$495ea.
Watson Dynamo Gloves
CUT LEVEL 3
• Aramid fiber shell
• Foam nitrile coated palm
• Great for carving or
handling glass, sheet
metal, etc
Reg. $13.99 pr.
WG-353M to
WG-353XL
95
pr.
$9
Save
28%
Howard Leight NRR 25
Sync Ear Muffs
Gojo "Natural Orange"
Hand Cleaner
• Pumice scrubbing particles
• 3.78L
Reg. $19.95
GOJO-095502
$1195
$995
3M 1100 Earplugs
200 PAIRS PER BOX
• NRR 29dB
• Soft polyurethane foam
• Smooth, dirt resistant surface
$1995
Save
33%
• Plugs into most MP3
players, mobile phones,
and other personal
audio devices
• No batteries
required
• Incl. 3.5mm cable
Save
37%
iPod not
included
Reg. $40.00
HOW-1030110
)HEWK7RWK
Reg. $29.99
3M-1100
IPOD READY!
$2495
3M Elastomeric
Half-Facepiece Respirator
• Use with 3M filters for a variety
of gases, vapors and particulate
hazards according to
NIOSH approvals
Reg. $15.99 ea.
3M-6200 Medium
3M-6300 Large
$1195ea.
)HEWK7RWK
$1095ea.
Save
31%
HAND TOOLS
30 kmstools.com
Proto Anti-Vibe
Ball Pein Hammer
Proto Compo-Cast
Combo Face Dead
Blow Hammer
• Top welded handle-to-head
assembly adds extra durability and safety
• Hot urethane Uni-Cast
construction outlasts all
other soft face striking
ng tools
• Urethane compositionn
provides shape-retaining
ing
faces even after
repeated striking on hard
rd
surfaces and sharp edges
es
• Handle is reinforced withh solid
steel shaft for greater
strength safety
• Top of head molded with a
flat surface
rd
• Dual head design (Standard
ads)
Dead Blow and Slim-line heads)
MADE IN
21oz
48oz
Reg. $51.86
PRT-57531
Reg. $78.93
PRT-57533
95
$29
USA
95
$49
• Patented AntiVibe
technology delivers greater
vibration dampening effect than
traditional one-piece steel hammer
• Molded textured rubber
provides a slip resistant
grip and increase control
• Rim tempered striking
surface adds extra
durability and safety
8oz
PRT-1308AVP
16oz
PRT-1316AVP
332oz
PRT-1332AVP
PR
Save
up
to
42%
48oz
4
PRT-1348AVP
PRT
$2995
Reg. $48.56
$3495
Reg. $55.86
$4295
Reg. $66.26
$7723
Proto 9pc Spline Ratcheting Sav
e
Combination Wrench Set
$10
6
LIFETIME WARRANTY
21pc 3/8" Dr VORTEX
Go-Thru Socket Kit
SAE/MET
• Up to 50% thinner than conventional
ratchet systems for use in tight places
• Run fasteners onto long threaded rod or
bolts, eliminates need for deep sockets
• Adapters for use with regular
1/4" & 3/8" drive sockets
• With Go-Thru sockets from
3/8" to 3/4" & 10 - 19mm
• Lifetime
warranty
Save
39%
• Engages the flats and not the corners
• Open end has anti-slip design
MADE IN
USA
• 9/32" (#9) to 3/4" (#24)
• Works on 4pt,
6pt, 12pt, spline,
E-torx and slightly
rounded bolts
• Black chrome finish
Reg. $275.99
PRT-JSCV9S
$16995
12pc Punch & Chisel Set
MADE IN
USA
• Hardened quenched and
tempered to precise specifications
• Cuts through soft cast iron, brass, copper,
aluminium, mild steel, bolts and rivets
Reg. $65.99
GW-8921
$4995
Reg. $99.99
PRT-J2
)HEWK7RWK
$6995
$3995
e
1/4" Dr Socket Sets Sav
up to
• 6 point
42%
7PC SAE FLEX
• 3/16" - 9/16"
12PC METRIC
• 5mm - 15mm
Reg. $69.99
GW-80310
Reg. $89.99
GW-80311
$3995
$5295
Save
$30
26pc Punch & Chisel Set
• Hardened steel
made to precise
specifications
• Black oxide
finish with bright
machined taper
• Includes - Center,
Prick, Pin, Starting,
Drift Punch, Cold
Chisel
Reg. $279.99
PRT-J46
$19995
Save
$80
MADE IN
USA
HAND TOOLS
Norseman
Drill Bit Sets
February 2014 31
21pc Set
Save
48%
• 1/16" - 3/8"
• High quality Molybdenum alloy
• Split point and modified
web construction
• Reduced thrust requirements
& increased rigidity
Reg. $76.99
NOR-SP21
MADE IN
$4995
)HEWK7RWK
USA
13pc Set
$3995
29pc Set
• 1/16" - 1/4"
Reg. $30.99
NOR-SP13
• 1/16" - 1/2"
Reg. $129.99
$1995
Save
42%
NOR-SP29
$8495
)HEWK7RWK
$7495
)HEWK7RWK
$1495
We carry a full line of "premium" individual Norseman drill bits
Spring Tool 39pc 1/4" Number and
Letter Punch Set
Irwin 76pc SAE & Metric
Tap & Die Set
LIFETIME GUARANTEE
• #4 1/2" NF taps and dies
• 3mm - 12mm taps and dies
• Thread gauge
• Tap and die handles
• Professional grade
• Hammerless technology
for superior results
• Will not double stamp
• Permanently stamp all forms
of mild steel
and most other surfaces
• 5000 lbs off striking
force insuress a full
stamp imagee
• Includes
square driver
er
Reg. $69.99
SPR-HDIDS609
)HEWK7RWK
MADE IN
$4995
USA
HIT 18" High Tensile
Bolt Cutters
• Durable jaws are made of
forged high tensile steel with
special heat treating, designed
for cutting hard material, spring
wire guys, hardened chains,
high-tensile bolts, etc.
Sa
Reg. $276.99
IRW-26376
$22995
)HEWK7RWK
$19995
Save
$77
$5995
up ve
to 50%
Save
28%
Intro
Pricing
Deburring Tool
• Left or right hand
Includes
• Ergonomic handle for
10 Blades
maximum comfort
• Lightweight
g
g strongg
construction
• Includes 5 S20 blades and
5 S100 blades
Reg. $32.99
NOG-LB1900
Save
39%
$1995
Norseman Spot Weld Cutter
• Cobalt alloy
MADE IN
18"
24"
6.5MM (1/4")
8MM (5/16")
Reg. $109.99
APC-22BC18R3
Reg. $129.99
APC-22BC24R3
Reg. $10.99
NOR-37520
Reg. $14.99
NOR-37470
$5495
$7295
$795
$995
36"
Save
Reg. $199.99
APC-22BC36R3
95
$109
up to
MADE IN
JAPAN
33%
USA
HAND TOOLS
32 kmstools.com
MTP Power Saver
Monitoring System
New
Design
• Find out what it really costs
to run your appliances, and
what is driving your energy bill
• Take control of your Carbon Footprint
and reduce the impact on your
wallet and the environment
• This is an excellent addition to
any Home, Office or Business
• Measures: instant energy (kW),
energy consumption (kWh), total cost ($
value), pollution (Kg CO2), averages, energy
tendency, ambient temperature and
relative humidity
Save
$20
Reg. $119.99
MTP-3100
MTP Automotive
Digital Multimeter
• Auto ranging
• LCD display of 4000 counts
• Low battery indicator
• Auto power off after
30 minutes
• CATIII 1000V /
CATIV 600V
• IEC 1010-1, EN61010-1
1
Reg. $194.99
MTP-1551
$15995
Save
$55
)HEWK7RWK
$13995
95
$99
Get ready
for hydro rate
increases!
MTP Digital Multimeter AC/DC
• Built-in non-contact AC voltage sensor
• Auto power off
• Data hold
• Back-lit 3 1/2 digit
LCD display
• Low battery indication
• Polarity indication
Reg. $74.99
MTP-2326
Knipex Wrench Pliers
$4995
LIFETIME WARRANTY
• Smooth parrallel jaws
• Compound leverage
• Adjustment at the touch
of a button
7"
10"
12"
Reg. $84.99
KNI-8603180
Reg. $94.99
KNI-8603250
Reg. $117.99
KNI-8603300
$5995
$6495
$7995
Save
up to
Save
33%
Wera 6pc Hex Shaft
Screwdriver Set
MADE IN
EUROPE
LIFETIME WARRANTY
• Pound through shaft
• Includes 4 slots and
2 phillips (#1 & #2)
Reg. $69.99
WER-018282
$38
$4995
)HEWK7RWK
$3995
Save
42%
MADE IN
GERMANY
Klein Bull Pins
• For aligning bolt holes when working
in steel construction
• Broad head adds resistance
to "mushrooming"
Save
23%
1 1/4"
• 1 1/4" top diameter by 5/16"
point diameter by 13 3/4" length
Reg. $29.99
KLE-3255
Channellock 9"
Ironworker Pliers Save
LIFETIME WARRANTY
Reg. $39.99
CHA-3505
$2495
1 1/16"
• 1 1/16" top diameter by 1/4"
point diameter by 10" length
Reg. $29.99
KLE-3256
Your Choice
37%
• Coil spring
• Dog leg handle for better leverage
• Laser heat treated cutting
edges
$2295ea.
MADE IN
USA
We carry a
large selection
of Channellock
February 2014 33
PRICE
CRUSHER
25pc Extractor Set
with Drill Guides
• Guides used so that drill
bit drills in straight
• Extracts screws and bolts
• Can be used
d
on thread
sizes 5mm
to 16 mm
Everything
y
g Below
s 1/2 price o
is
or LESS
Shop Pro
Sh
P Ball
B ll Pein
P HHammers
8OZ - 32OZ
• Comfortable fiberglass handle
• Textured handle makes for handling ease
Reg. $6.99-$14.99 ea.
TTN-63308 to
TTN-63024
$350-$750ea.
Reg. $39.99
RRT-04200A
$1995
Check out our
full selection of
Shop Pro Hammers!
13pc Cobalt Drill Bit Set
• Made of a cobalt/steel alloy
• Sizes from 1/16" to 1/4"
• Comes in a protective
carrying case with
size index
Reg. $14.99
RRT-10178A
• Used for removing O-Rings
ngs
without damaging them
m
• 2 contoured tips
• 2 spoon tips length 5 1/2" and 8 1/2"
• CRV steel shafts
$695
Titan Adjustable
Wrenches
6"
8"
Reg. $5.99
TTN-12142
Reg. $6.99
TTN-12143
$295
$349
10"
12"
Reg. $10.99
TTN-12144
Reg. $12.99
TTN-12145
$549
$649
Performance Tool
3pc Step Drill
Bit Set
TITANIUM NITRIDE
COATED
• 17 hole sizes,
1/4" to 3/4"
• 1/4" hex drive
shanks
Reg. $21.99
WIL-W9003
$995
Titan 4pc O-Ring
Removing Set
Reg. $29.95
TTN-17004
$1295
Titan 3pc Extra Long
Ratchet Set
• 36 fine-tooth ratchet
design for fast
performance
• Less than 5o sweep for
use in tight spots
• Extra long design for
easier access to
confined areas
• Push button quick
release design
Reg. $129.99
TTN-11088
$4995
AIRTOOLS
34 kmstools.com
Mechanics Air Hammer
3/8" Air Ratchet
• 50 ft/lbs of torque
• Compact head design
• Hardened steel gears for greater durability
than other ratchets in this price range
Reg. $99.99
CP-886
• 4500 BPM, 1 5/8" stroke
• For general repair work,
cutting and exhaust
system work
• Includes spring retainer and
4 heat treated chisels
Reg. $21.99
WIL-M550DB
$1495
$8995
Save
32%
)HEWK7RWK
$8495
Mechanics 1/4" Angle Air Die Grinder
1/4" Die Grinder
• Rugged, energy efficient 1/2 HP motor
• Heavy duty bearings for long tool life
• Lock off throttle
• Adjustable speed
• Excellent for cleaning tire moldings,
porting and relieving engines, and general
high-speed polishing and grinding
Reg. $159.99
CP-860
$13995
MADE IN
JAPAN
HEAVY DUTY
• 1/4 HP motor
• Easy access speed regulator
• Comfortable insulated handle grip
• Rear exhaust
• 10,000 SPM
• Lock off throttle
• Rear exhaust
Save
$20
$64995
$3995
Ingersoll Rand Super Duty
1/2" Impact
• 780 ft/lbs of torque
• Built-in muffler, extremely quiet
• Titanium/composite body
weighs only 3.95lbs
• Handle exhaust
prevents blow back
Save
$90
Reg. $419.99
IR-2135QTIMAX
Save
$100
• 2140 ft/lbs max. reverse torque
• Heavy duty rocking dog clutch
• Industrial 6" long anvil for extended reach
• Professional sensitive touch trigger and
adjustable 3 position power regulator
provides unmatched power control
• Swivel inlet prevents hose kinks
• Includes ergonomic side handle
Reg. $749.99
CP-77826
Save
27%
Reg. $54.95
WIL-M660
$9995
BEST TORQUE IN CLASS
Reg. $32.99
WIL-M656
Performance Tool
Air Reciprocating Saw
Reg. $119.99
CP-9105QB
1" Impact Wrench
Save
24%
$2495
Save
$20
1/4" Straight Die Grinder
• 20,000 RPM
• Great for sanding, grinding,
detail work and finishing
• 90o angle head
for use in
confined
areas
• Variable
speed
$34995
)HEWK7RWK
$32995
OTHERS FROM $39.95
Ingersoll Rand 6" Dual-Action Sander
PROFESSIONAL QUALITY
• 3/16" orbit
• 12,000 RPM free speed
• Adjustable built-in regulator
for speed control
• Balanced ball bearing
construction
• 4.2 lbs
Reg. $109.99
IR-311A
$6995
Save
$40
COMPRESSORS
Makita "Hot Dog" Compressor
QUIET RUNNING, LOW RPM
• 3.3 CFM @ 90 PSI
• 110V, 12.4A, 2.6 gallons
• 60% duty cycle, up
to 4,000 hour life
expectancy
• Oil lubricated pump
Reg. $249.99
MAK-MAC700
$209
Reg. $429.99
MAK-MAC5200
$37995 Save
)HEWK7RWK
)HEWK7RWK
$19995
$60
$36995
Rolair Wheeled Compressor
QUIET RUNNING, LOW RPM
• 4.2 CFM @ 90 PSI
• 110V, 12.3A, 3.2 gallons
• 70% duty cycle, 6,000
hours life expectancy
• Oil lubricated pump
• Onboard storage fits
18 Ga Nailer
• 2 outlets
95
$349
Campbell Hausfeld
20 Gallon Compressor
3 YEAR WARRANTY
• 10.2 CFM @ 90 PSI
• 230V,14.5A, 20 Gallons
• 70% duty cycle, up to 5,000
hour life expectancy
• Oil lubricated, cast iron pump
Save
$90
Reg. $649.99
CH-VT6182
Save
$50
Reg. $379.99
ROL-VT20TB
$57995
)HEWK7RWK
)HEWK7RWK
$329
$55995
95
Campbell Hausfeld Compressor
3 YEAR WARRANTY
• 5.6 CFM @ 90 PSI
• 110V, 15A, 20 Gallons
• 70% Duty cycle, up to
5,000 hour life expectancy
• Oil lubricated, cast iron pump
Reg. $599.99
CH-VT6183
Makita Contractor's
Compressor
• 6.5 CFM @ 90 PSI
• 110V, 14.5A, 5.2 gallons
• 60% duty cycle, 5,000
hours life expectancy
• Powers two framing
nailers simultaneously
Save
$50
95
February 2014 35
Rolair 9HP Gas Wheelbarrow
Compressor
HONDA ENGINE
Save
$500
• 16.2 CFM @ 100 PSI
• Twin 9 gallon tank
• 100% Duty cycle, up to 15,000
hour life expectancy
• Heavy duty cast iron Italian made pump
• Pneumatic tire with sealant
Save
$54995 $70
Reg. $2099.99
ROL-7722HK28
)HEWK7RWK
$169995
$52995
)HEWK7RWK
Rolair 5.5HP Gas Wheelbarrow
Compressor
HONDA ENGINE
Save
$300
• 8.9 CFM @ 100 PSI
• Twin 9 gallon tank
• 70% duty cyce, 15,000
hour life expectancy
• Heavy duty cast iron Italian made pump
• Pneumatic tire with sealant
Reg. $1299.99
ROL-4090HK17
$109995
)HEWK7RWK
$99995
$159995
Rolair 13HP Gas
Stationary Compressor
HONDA ENGINE
Save
$300
• 23 CFM @ 175 PSI
• 30 gallon tank
• 100% duty cycle, up to 15,000 hour
life expectancy
• Heavy duty
Italian made
pump with cast
iron cylinders
• Swedish made
Lammelar valves
Reg. $2799.99
ROL-13GR30HK30
$249995
COMPRESSORS
36 kmstools.com
5HP Compressor
5HP Compressor
3 YEAR WARRANTY
INCLUDES MAG SWITCH
• 16 CFM @ 90 PSI
• 230V,19A,60 Gallons
• 90% duty cycle, up to
10,000 hour life
expectancy
• Oil lubricated, single stage
tage
cast iron pump
• 14.3 CFM @ 90 PSI
• 230V, 80 Gallons
• 100% duty cycle, up to
10,000 hour life
expectancy
• Oil lubricated, Cast iron
two stage pump
Reg. $1249.99
CH-TQ3101
Reg. $1399.99
CH-CE6000
$109995
$119995
Save
$200
)HEWK7RWK
$99995
Save
$250
Industrial 5HP Compressor
3 YEAR WARRANTY
• 17.1 CFM @ 90 PSI
• 230V, 3PH, 17.1A,
80 Gallons
• 100% duty cycle, up
to 15,000 hour life
expectancy
• Oil lubricated, cast
iron two stage pump
• Includes mag switch
Reg. $2099.99
CH-CE7051
$159995
Ne w
L owe r
P r ice !
Industrial 7.5HP
HP Compressor
3 YEAR WARRANTY
Y
• 25 CFM @ 90 PSII
• 230V, 3PH, 31.4A,
A,
80 Gallons
• 100% duty cycle,
up to 15,000 hour
ur
life expectancy
• Oil lubricated, cast
st
iron two stage pump
mp
• Includes mag switch
tch
Reg. $2299.99
CH-CE7001
Save
$189995
up to
$500
Save
up to
$400
1 PHASE MODEL
1 PHASE MODEL
$169995
$199995
CH-CE7050
CH-CE7000
10HP Compressor
15HP Compressor
INCLUDES MAG STARTER
INCLUDES MAG STARTER
• 37.6 CFM @ 90 PSI
• 208-230/460V, 3PH motor,
120 gallon tank
• 100% duty cycle, up to 15,000 hour life
• Oil lubricated, 2 stage cast iron pump
• 54.4 CFM @ 90 PSI
• 208-230/460V,
3PH motor, 120 gal. tank
• 100% duty cycle, up to 15,000 hour life
• Oil lubricated, 2 stage cast iron pump
Reg. $3299.99
CH-CE8001
$2999.95
SPECIAL ORDER IN
SOME LOCATIONS
Reg. $3999.99
CH-CE8003
Save
$300
$349995
SPECIAL ORDER IN
SOME LOCATIONS
Save
$500
AIR TOOLS
Spot Sprayer
DeVilbiss Touch-Up
HVLP Spray Gun
NON-AEROSOL SPRAYER
• Can be pressurized via
standard Schrader valve
• 80-150 PSI operating
pressure
• 32oz capacity
• Refillable
Reg. $32.99
TTN-19419
95
$24
February 2014 37
• 1.0mm Tip
• Aluminum cup
• Great for many automotive and
woodworking applications
Reg. $109.95
DV-802405
Save
24%
$8995
Vaper HVLP Spray Gun
Save
$20
Vaper HVLP Touch-Up
Spray Gun
• Includes 1.4mm tip, plastic
lastic
paint cup and pressuree
regulator with gauge
• Excellent for spraying
base/clear automotivee
paints as well as somee
stains and lacquers
• Includes 1.0mm tip and
aluminum paint cup
• Excellent for spraying base/
clear automotive paints
• Narrow spray pattern and
compact size for
detailed work in
confined areas
Reg. $54.99
TTN-19000
$2695
Reg. $34.99
TTN-19110
95
$24
Save
28%
Milton Tire Inflator Gauge
Milton Quality Blow Gun
• Equipped with magnifying lens
for full view of scale 10 lbs to
120 lbs, in 2 lb increments
• Includes rubber tip
• 1/4” NPT air inlet
• Leak proof connection when
blowing out fluid lines
Reg. $54.99
MIL-S506
95
$44
Save
27%
Reg. $16.99
MIL-S153
$995
Save
41%
)HEWK7RWK
$39
95
MADE IN
USA
Chicago Pneumatic
Air Tool Oil
"Protecto-Lube"
• 591ml
Reg. $9.99
CP-CA000046
$795
Save
20%
Vaper 1/4" Locking Air Regulator
WITH GAUGE
• Small and lightweight
• Attaches to all conventional
and HVLP spray guns
Reg. $14.99
TTN-19303
$995
Save
33%
Flexzilla Hose 1/4" x 25' 1/4NPT
• Very flexible, abrasion resistant,
lightweight and non-marking,
zero shape memory, lays flat
• Easy to field repair
• Temperature Range:
-40°C to +65°C
Save
26%
Reg. $26.99
LEG-FLX1425
$2295
)HEWK7RWK
$1995
FULL RANGE OF SIZES, LENGTHS
AND STYLES AVAILABLE
12pc Air
Accessory Kit
• Will accommodate two
air hoses and eight tools
for less than half price
if bought separately
Reg. $24.99
MIL-S210
$1995
Save
20%
NAILERS
38 kmstools.com
Cadex 1 3/8" 23 Ga
Pin/Brad Nailer
• Drives 3/8" - 1 3/8" brad
nails and headless pins
• Belt hook, magazine sight
window, no-mar nose tip
• Almost invisible, no filling required
• Built-in blow gun
Reg. $249.99
CAD-CPB2335
95
$149
)HEWK7RWK
$13995
Save
$110
Senco 1 5/8" 18 Ga
Narrow Crown Stapler
LIGHTWEIGHT MAGNESIUM BODY
Save
$50
• Drives 3/8" - 1 5/8" narrow crown staples
• Oil free design
• Select fire switch
• Tool-free depth adjustment
• Adjustable
belt hook and
rear exhaust
Reg. $159.99
SEN-SLS18MG
Senco 2" 18 Ga Brad Nailer
LIGHTWEIGHT MAGNESIUM BODY
Reg. $149.99
SEN-FP18MG
$10995
)HEWK7RWK
$11995
$9995
)HEWK7RWK
$10995
HOT SHOT
2" 18 Ga Brad Nailer
• Drives 5/8" - 2" nails
• Tool-free depth adjustment
and jam release
• Includes case
Reg. $54.99
BYN-HS4
Save
up to
41%
)HEWK7RWK
$3495
18 Ga Narrow Crown Stapler
• Drives 5/8" to 1 1/2" staples
• Tool-free depth adjustment
and jam release
• Includes case
Reg. $59.99
BYN-HS8
Senco 2" 23 Gauge
Headless Pin Nailer
• Drives 5/8" - 2" nails
• Belt hook, rear exhaust
with built in muffler, ergonomic
angled handle, anti-dry fire
and no-mar nose tip
• Almost invisible, no filling required
Reg. $299.99
SEN-8L0001N
$24995
Save
$50
Save
$50
• Drives 5/8" - 2" brad nails
• Oil free design
• Tool-free depth adjustment and jam release
• Adjustable belt hook and rear exhaust
Your Choice
$3995
Cadex 2" 21 Gauge Nailer
DRIVES INTO HARDWOODS
• Precision nose
• Built-in blow gun
• Belt hook, magazine sight
window, no-mar nose tip
• Anti dry fire mechanism
• Safety trigger
Reg. $359.99
CAD-CPB2150
$30995
)HEWK7RWK
$29995
Save
$60
NAILERS
Senco 2 1/2" 15 Ga Finish Nailer
February 2014 39
Senco Flooring Nailer
5 YEAR WARRANTY
PROFESSIONAL
• Oil free
• Lightweight magnesium body
• Tool-free depth adjustment
and jam release
• Drive 1 1/2" to 2"
cleat nails
• Mallet actuated operation
• Toolless base plate
change to accommodate
1/2" and 3/4" flooring
• Inc. case and mallet
Reg. $369.99
SEN-FP42XP
$24995
Reg. $379.99
SEN-SHF200
$34995
)HEWK7RWK
$23995
Save
$30
Save
$130
Max 3 1/4" 28o Framing Nailer
• Drives 2" - 3 1/4" nails at 28o
• Bump fire/single fire trigger
• Adjustable depth control
• Compact design, only 12 1/4" tall
• Open nose for easy
jam clearing
Save
$70
Max 2 1/2" Siding Nailer
• Drives 1 1/2" - 2 1/2" wire or
plastic collated nails
• Adjustable depth control
• Multi-directional
exhaust cover
Save
$120
Reg. $499.99
MAX-CN565S
Reg. $379.99
MAX-SN883CH28
$39995
$31995
)HEWK7RWK
)HEWK7RWK
$37995
$30995
Max 2" Sheathing Stapler
Max 3 1/2" Coil Framing Nailer
• Drives 7/16" crown staples 1" - 2" long
• Rapid fire trigger valve
• Tool-free jam release
• Adjustable depth control
• Very lightweight at only 7.7lbs
and height of only 13 1/2"
• Easy-load magazine
• Anti-double fire mechanism
• Dial adjustable
depth control
• Comfortable
rubber grip
Reg. $379.99
MAX-TA551A1611
$29995
Reg. $499.99
MAX-CN890F
Save
$80
$37995
Save
$120
Magnum Fasteners
3" 28o Framing Nails
Magnum Fasteners
2 1/4" 15 o Coil Nails
2000 PER BOX
5000/BOX
Reg. $20.99
NAI-FN283
$1495
Reg. $32.99
NAI-FC15214S
Save
28%
$1995
Save
39%
1 1/2" Sheathing Staples
7/16" CROWN
• 16 gauge
• 10,000 per box
Reg. $39.99
STA-SS16112
$2995
Save
25%
CONSTRUCTION
40 kmstools.com
Allright Tower Scaffolding Save
All Erickson
Blue Tarps
1000 LBS DUTY RATING
$30
• Quick assembly and adjustment
• Locking truss pins
• Fits through 30" doorways
• Max. platform height 18ft with outriggers
• Load capacity
to 1000 lbs
• 4 stage powder
coated finish
• 5/8" locking
plywood deck
with hand holes
• 5" two way
pinned locking
casters (swivel
and wheel lock)
30% Off
Magnum Drywall
Panel Lifter
• Hangs drywall in sizes
up to 4' x 16' on any
ceiling or wall up to
11' high
• Tilting cradle
designed for single
person operation
Reg. $299.99
ALR-S600
$26995
Reg. $179.99
MAG-TSJ001
$14995
10' x 20' Heavy Duty
All Season Canopy
COVER:
)HEWK7RWK
• One piece seam welded roof and sides
• Fire-retardant FR-5
• UV treated
• 16x16 Weave
$13995
Save
$40
FRAME:
Century 50Ft Triple Tap Yellow
Extension Cord
12 GAUGE 3 WIRE
• Remains flexible in low
temperatures
• Resists oil and grease
• Includes molded-on
on
lighted triple tap
connector
• Powder coated leg poles
• Roof stabilizing rods
• Horizontal poles
p
to hold the roof cover
by sleeve
ve style strap
Reg. $469.99
9.99
16
STG-31916
$34995
Save
$120
Includes Front & Back Panels
Reg. $64.99
CWC-D15312050
$2995
Century 50Ft Extension Cord
Kuny's Carpenter Belt
• Remains flexible in low temperatures
• Resists oil and grease
• Molded-on lighted
connector
HEAVY 10 GAUGE 3 WIRE
• Durable split leather
• Five reversed nail pockets for easy
access (2 large & 3 small)
• Steel
hammer
holders
and leather
pencil holders
Reg. $39.99
KUN-AP622
Tools not included
95
$29
Weiler Boot Brush & Frame
• Polyethylene bristles remove mud,
dirt, grass clippings and other
debris from boots and shoes
Reg. $19.99
WEI-44391
$1695
)HEWK7RWK
$1495
Save
25%
Save
25%
Reg. $89.99
CWC-D19005862
$5995 Save
33%
Kuny's Electrical &
Maintenance Tool Bag
• 17"H x 8"L x 8"W
• Box shaped design to
prevent tipping with
28 separate pockets
• Includes 7" x 5 1/2"
multi-compartment
plastic tray which
stores securely
in bottom of bag
Reg. $54.99
KUN-EL748
$3495
)HEWK7RWK
$29
95
Save
45%
Parts not
included
CONSTRUCTION
February 2014 41
PLS Rotary Laser Level
Bosch Cross Line Laser
EXTERIOR 1,000 FOOT RADIUS RANGE
• Accuracy of ±1/8" at 30'
• Self levelling
• Includes laser target, magnetic mounting
base, carrying case & batteries
• Accurate to +/- 3/32" @ 100 ft
• Includes laser detector
• Includes rechargeable
battery pack
Reg. $209.99
BOB-GLL240
Reg. $669.99
PLS-60584
$14995
95
$559
Save
$110
Stabila 27ft Tape Measure/
Pocket Level Set
Save
$130
Adjustable
Tripod
• 1" blade with markings on
both sides
• Magnetic base German made
level with belt holder
Reg. $41.99
STAB-11927
Tape-Ease
Tape Measure
Attachment
)HEWK7RWK
$2495
$19
95
• Rubber tip extender snaps on
to any 1" wide tape measuree
• Makes measuring a single
person job
Empire 12" Professional
Combination Square
Reg. $5.99
TAPE-12C2
$395
• Heavy duty machined square head
• Etched stainless steel blade
with inch graduation
Reg. $18.99
EMP-E250
Save
34%
Tape measure
not included
Construction Master Pro Calculator
$1295
• Convert between any building dimensions
• Complete stair layouts
• Roof, rafters and
framing solutions
Save
31%
Reg. $79.99
CI-4065
$6995
Stanley 25ft FatMax
Measuring Tape
THE STANDARD IN TAPES
• 11' standout
• 1 1/4" wide blade for easy readability
• Slip-resistant cushion grip
• Standard markings
Save
33%
Reg. $29.99
ST-33725
$1995
Empire 16'' x 24'' Aluminum
Carpenter's Square
PROFESSIONAL QUALITY
• 24" x 2" body, 16" x 1 1/2" tongue, 1/8" thick
• Deep stamped inch graduations,
numbers and rafter tables
• 1/8", 1/10", 1/12",
1/16" graduations
Reg. $13.99
EMP-1140
Standard/
Metric version
also available
$995
ST-33726
Others from $299
Estwing 20oz Milled
ed Face
Framing Hammer
mmer
Reg. $36.99
20SM
EST-E320SM
95
5
$29
Save
24%
Save
$10
Save
28%
Vaughan "Ti-Tech" 16oz
Titanium Hammer
HEAVY DUTY
• Replaceable steel caps
and anti-vibration handle
• Magnetic nail holding slot in head
• Long 18" curved American hickory handle
Reg. $109.99
VAU-TTC1HC
)HEWK7RWK
$27
95
Save
$20
$8995
KMS Tools carries a full range of Carpenter Hammers
WOODWORKING
42 kmstools.com
General 2" x 42" Belt Sander
8" SANDING DISC
• 1/2HP, 110V
• 3100 RPM Belt speed
• Use either 1" or 2" x 42" sanding belts
• Double sealed
ball bearing
construction
uction
Reg. $349.99
99
2M1
GEN-15142M1
$32995
General Benchtop
Sander & Grinder
INCLUDES LIGHT
Save
$45
• 1/3HP, 110V
• 4560 RPM belt
speed
• 3450 RPM
grinding speed
• Double sealed
ball bearing
construction
Reg. $224.99
GEN-15232M1
$17995
Save
$20
King Canada Dust Collector
ADJUSTABLE DUST HOODFOR BENCH WORK
General Universal Mobile Base
500LB CAPACITY
• Square size: Min.11" x 11"
Max. 35 1/4" x 35 1/4"
• Rectangle size: Min. 17" x 1"
Max. 51" x 19"
Save
32%
Reg. $73.99
GEN-50025
• 1HP 110V Motor
• 600 CFM
• Includes
5 micron dust
bag and
4" x 10' hose
)HEWK7RWK
$16995
Reg. $214.99
KC-1105C
$17995
Save
$45
$5995
Magnum 4" x 10' Dust
Collection Hose
)HEWK7RWK
$49
95
• Industrial grade clear hose to
see and clear clogs quickly
Reg. $31.99
DC-12410CL
King Canada 14"
Wood Bandsaw Save
• 3/4HP, 110V Motor
• Table tilts left 15o
and right 45o
• Includes mitre gauge,
blade and stand
$2495 Sav
e
22%
$40
Full range of dust collection hoses and
fittings available
Reg. $419.99
KC-1401HD
$39995
King Neoprene Bandsaw Tire
• For superior wearability and
resistance to abrasions
)HEWK7RWK
Reg. $19.49
KC-KW094
$37995
King Canada Dust Filtration System
REDUCE HARMFUL AIRBORNE DUST
• 410 CFM
• 2 stage filtration system
to 1 micron
• 3 speed remote control, with timer
• 62 dB rating
Reg. $214.99
KC-KAC410
95
$189
)HEWK7RWK
$179
95
Save
$1495 33%
Save
$35
)HEWK7RWK
$1295
DGC Dust Collector Power Tool Switch
• Synchronizes dust extraction system
so your power tools and dust collector
run at the same time
Reg. $47.99
DGC-IS110M
$3995
)HEWK7RWK
$3495
Save
27%
WOODWORKING
Dimar 8pc Brad Point
Drill Bit Set
GERMANY
Dimar 4pc Round Over
Router Bit Set
MADE IN
• 1/8" - 3/8"
• Polished double edge flutes for
exceptionally accurate holes
1/4" OR 1/2" SHANK
• 3/4" to 1 1/2" diameters
• Carbide tipped
• 6 extra bearings
for versatile
depth options
• Solid wood
storage box
Reg. $28.99
DIM-205DS8
$1995
We stock a full range of individual brad point bits
Snappy 3pc Hinge Bit Set
5/64", 7/64", 9/64"
• Perfectly centred pilot holes
for hinges & drawer guides
February 2014 43
Reg. $44.99
DIM-WPSET1094 1/4
DIM-WPSET1098 1/2
$2250
MADE IN
USA
Reg. $44.99
SNA-45300
$3295
Save
33%
MADE IN
ITALY
)HEWK7RWK
6" 10 Tooth Dado Set
$2995
Rockler Thin Rip Tablesaw Jig
• Allows the user to rip thin strips on the left
side of the blade and eliminates the danger of
pushing narrow strips between the saw and
fence that
cause binding
and kickback
Reg. $29.99
ROC-36833
• Cuts 1/4" - 13/16"
• Square tooth design
• Set includes 2 blades,
a shim set, 3 chippers and
protective
case
Reg. $149.99
FRE-SD206
$9995 Save
$50
95
$24
10" 30 Tooth Thin
Kerf 'Glue Line' Sawblade
ELIMINATES THE NEED FOR
SANDING & JOINTING
JessEm Router Lift FX
INCLUDES LIFTING BRACKET & HANDLE
• Fits most 2HP routers
• 9" x 11 3/4"
• Anodized aluminum
machined plate
MADE IN
CANADA
• Triple chip design produces extremely smooth
surfaces for gluing & finish work after ripping
• Cuts from 1/8"-1" thick
• Teflon coated
Reg. $79.99
FRE-LM75R010
$5995
Reg. $179.99
JES-02310
95
$159
10" 50 Tooth
Combination Sawblade
Franklin Titebond
Original Wood Glue
1 GALLON
Save
30%
• Industry standard
• Strong initial tack and fast
setting to reduce clamp time
• Develops a bond stronger
than the wood itself
• Excellent sandability and is
unaffected by finishes
$1995
)HEWK7RWK
$5495
Save
$20
Reg. $25.99
FRA-5066
Save
31%
)HEWK7RWK
$1795
We stock a variety of different types of glue
• Teflon coating resists resin build up
• Titanium carbide teeth
eeth
Reg. $81.99
FRE-LU83R010
$4995 Save
$39
10" 80 Tooth Melamine Sawblade
FOR MIRROR CUTS IN DOUBLE
SIDED MELAMINE
• No need for a separate
ate scoring blade
• Unique 38o tooth angle
ngle for
fast and precise cutt
tting
Reg. $129.99
FRE-LU3A05
$9995
Save
$30
WOODWORKING
44 kmstools.com
Milescraft Door Hinge
Mortise Kit
Kreg Large Pocket Hole Jig
OPTIMIZED FOR LARGE OUTDOOR PROJECTS
• Easy to use drop in template design with
clearly marked templates
Reg. $29.99
MILE-1214
$1995
Save
33%
• 50% Stronger than standard pocket-holes
• For use with 1 ½" materials and up
• Works with
the Kreg
Jig Master
System
Reg. $64.99
KRE-KJHD
$5995
R
Kreg Pocket Hole Master Kit
• Includes: Ratcheting front-side clamp,
extension wings, swiveling dust collection
port, drill guide block, spacer block,
work piece stop, drill bit setup
block, stepped drill bit, 6"
driver bit, stop collar,
starter screw and plug pack
Reg. $159.99
KRE-K5
iGaging Depth Gauge
$13995
• 0 to 4" capacity
• Reads in inches, metric or fractions
• Spring loaded movement
• Includes 1" and 2" extension bars
Reg. $23.99
IGA-350904
$1795
)HEWK7RWK
Save
$20
Save
33%
Incra 5" Precision Mitre Gauge
• GlideLOCK mitre bar with
4 expansion points
• Angle stops at every 5o increment,
plus a stop at 22.5o
• 60o range
• Fits standard 3/4" x 3/8" mitre channels
$1595
Save
21%
Starrett Stick-On
SAE Tape Measure
Reg. $75.99
INC-MITERV27
• High quality precision steel
rule is flat with permanent
adhesive back
• 1/2" x 12 feet
Reg. $11.99
STAR-SM412W
$695
R
$6495
Save
42%
)HEWK7RWK
METRIC ALSO AVAILABLE
$5995
STAR-SM412ME
WOODTURNING
4pc Carbide Scraper Turning
Tool Set with Handle
USA
MADE IN
• 4 most popular
profiles with
replaceable, indexablee
carbide scrapers
• Includes deluxe handlee
Reg. $234.99
SWT-RS4PC60
95
$209
$1895
Reg. $59.99
LL-JS130N
$4495
)HEWK7RWK
$3995
included
)HEWK7RWK
$1595
Save
40%
Lathe Tailstock 8TPI Adapter
Nova 130mm (5")) Jaws
• Designed for large turnings (great
for platters, large bowls, etc)
• Extra threaded holes to allow
the mounting of custom
wooden jaws
• Fits Nova Midi, G3, Supernova
and Titan Chucks
• A spur drive center you can
use without removing
your chuck
Chuck not
Reg. $26.99
LL-NCSC
Save
$25
FITS NOVA / TEKNATOOL CHUCKS
Nova Spur Centre
Save
33%
• 1 1/4" x 8TPI to #2 MT adapter
allows you to mount chucks and
faceplates to your tailstock
• Allows for perfect alignment when
remounting work to turn the other side
in dead or live mode, saving you time and
material normally wasted in
truing work piece up
Save
26%
Reg. $26.99
LL-5016
$2195
)HEWK7RWK
$1995
OUTDOOR POWER EQUIPMENT
Generac XP Series Generators
TRUE WATTAGE OUTPUT,
ELECTRIC START
• TruePower technology
provides clean, smooth
operation of sensitive
electronics, tools, and appliances
• Locking, folding handles and never-flat wheels
• Low-oil pressure shutdown
down
8000W
• 66.7A @ 120V runningg
• 220cc Generac
OHVI engine
• 10,000W starting
Reg. $2799.99
GNR-5931
$249995
Save
$300
February 2014 45
BE I Series 3500W
Inverter Generator
• 3000 running watts
• Two 120V, one twistlock
120V and one 12V outlets
• Uses straight gas, no mixing
• Low noise
• Saves fuel and reduces wear by
adjustingg engine speed to load
• Clean power
wer for
computers
ers and
other electronics
ctronics
Save
$140
Reg. $869.99
9
BE-I3500
$749955
)HEWK7RWK
WK
10,000W
• 83.3A @ 120V running
ng
• 530cc Generac
OHVI engine
• 12,000W starting
$72995
Reg. $3399.99
GNR-5932
Save
$319995 $20
0
BE 2700 PSI Pressure Washer
5 HP HONDA GC 160CC GAS ENGINE
• 2.3 GPM axial pump
• Residential rated for 500-600 hrs
• Incl: 3 cleaning tips, 1 soap tip,
low pressure chemical injector,
25' hose and 36" gun
Reg. $519.99
BE-P275HX
$44995
Save
$90
)HEWK7RWK
• 4000 PSI Max pressure
• Non-marring
• Includes couplers
$104995
Save
$45
BE Pressure Washer
Replacement Pump
• 4HP to 7HP
• 3100 PSI @ 2.3 GPM
• 3/4" dia. engine shaft
• Incl. outlet fittings for m22
and quick connect hoses
Pressure Washer Pump Oil
• Change oil every spring or 50 hrs
of use for extended pump life
$7
95
Save
20%
• Weighs just 9.4 lbs
• Touch & Stop switch automatically returns
to start position eliminating flooding
• Intelligent ignition coil
stabilizes idling,
increases power and
protects against
engine overrun
Save
$50
Reg. $289.99
MAK-EA3201S40B
Save
$40
Reg. $179.99
BE-85170005B
Makita 16" 32cc Chainsaw
$23995
13HP HONDA GX 390CC GAS ENGINE
Save
$109995 $25
0
BE 3/8" x 50' Pressure
Washer Hose
Reg. $9.99
BE-85490000
BE 3700 PSI Pressure Washer
Reg. $1299.99
BE-P3713HC
$42995
$6495
43%
• 4.0 GPM Italian made Comet Triplex pump
• Rated for 3000 hours
• Incl: 3 cleaning tips, 1 soap tip,
low pressure chemical injector,
50' hose and 36" gun
)HEWK7RWK
Reg. $109.99
BE-85238156
Save upto
$13995
Makita 16" Electric Chainsaw
QUIET COMPARED TO
GAS CHAINSAWS
• 14.5 amp Motor
• Tool-less chain adjustment
• Rubberized soft grip
Reg. $319.99
MAK-UC4030A
$26995
Save
$50
46 kmstools.com
kmscarparts.com
.com
com
om
m
604-522-5593
93
1-800-567-8979
79
Glass
• Available in
Tint or Clear
Save
Windshields
Door Glass
$16995
$4995
Vent Glass
Back Glass
$2395
$7995
We can ship
W
tto your
yo nearest
n
KMS location!
Complete Weather Strip Kit
67-72 GM TRUCK
• Windshield seal with or with out trim groove
• Large or small rear window
• Upper door glass channel
• Division post glass run
• Black or chorme beaded beltline
• Door seal with mitered corner
• Vent seal kit
up to
20%
Save
$10000
Reg. $299.99
1PRP-CWK111067 to 1PRP-CWK111767
95
$199
20%
2
0% OFF '67-'72 Chevy Sheet Metal
ta
al
al
Cowl
C
Co
w Induction Hood
• 67-68 Chevy/GMC
• Functional/steel
Floorboards
• 67-72 Chevy/GMC
Reg. $58.99
1COU6746060L
1COU6746060R
Reg. $569.99
1COU6716730C
$47
99
$455
19
Tailgate
• 68-72 Chevy/
GMC Fleetside
Reg. $259.99
1COU6765050
$20799
/ea
Aluminum Grill
• 67-72 Chevy
Reg. $209.99
1COU6717750F
$16799
Reg. $435.99
1COU698200
Fleetside Shortbox
$34879
• 67-72 Chevy/GMC
Reg. $699.99
1COU6816500SBL
1COU6816500SBR
Chrome Front
Bumper
$55999/ea
$99995/pair
• 67-70 Chevy
Reg. $209.99
1COU6717755
$16799
Chrome Rear Bumper
Front Fender
• 67-68 Chev or
68-72 GMC
Reg. $209.99
1COU6716000L
1COU6716000R
$16799/ea
Door Shell
• 67-71 Chevy/GMC
Reg. $409.99
1COU67702360
1COU67702361
$32799/ea
Rocker Panels
• 67-72 Chevy/GMC
Reg. $24.99
1COU67706000L
1COU67706000R
$1999/ea
CPP Grand Slam Kit
Sway Bar Kit
DROP AND STOP YOUR TRUCK
• Front and Rear
• 63-72 GM PU
• 67-72 Chevy pickup
• Stock height or 2.5" Drop spindles
• 5 or 6 Lug rotors
• Master & booster
• Lines and fittings
• Customizable front and rear
lowering springs and shocks
Save
$200
Reg. $319.99
1CP-6372SBK
95
$284
Reg. $1499.99
1CP-6770GSK6S
1CP-6770GSK6D
1CP-6770GSK5S
1CP-6772GSK5D
Fleetside Longbox
• 68-72
Reg. $799.99
1COU6816500LBL
1COU6816500LBR
$63999/ea
)HEWK7RWK
$25995
Save
$60
$129995
Heidt's Bolt in Front IFS for 67-72 GM Truck
DROP UP TO 4"
• Direct bolt in coil over suspension
• Includes 2" drop cross member
• Stock or 2" drop spindle
• Power rack and pinion
• Tubular control arms
• Big brake package available
Reg. $3499.99
1HDT-BX603
starting at
$339995
Save
$100
CAR PARTS
February 2014 47
RED
STICKER
USED CLEARANCE
SALE
New Clearance Area Now Open
pen iin
nC
Coquitlam
oq
Ford
GM
'51 Shoe Box Deck Lid
$4999
'57 Fairlane Front & Rear Doors $12499ea
'58 Edsel Deck Lid
$7499
'66 Ford Truck Doors
$12499ea
'67-'68 Mustang Door LH
$7499
'52 Truck Doors
$10999ea
'97 Truck Hood
$9999
'58-'59 Truck Hood
$4999
'63 Buick Special Fenders
$5999ea
'65 Cadillac Fender Skirts
$1499ea
'72 Cutlass Hood
$2999
'51-'52 Chevy Hardtop Deck Lid $3999
'67 Chevelle Hood
$9999
'68 Camaro Hood
$7499
'62-'65 Nova Deck Lid
$5999
Mopar
'70-'72 Duster Doors
'52 Dodge Truck Fenders
'68 Monaco Fenders
'72-'81 Dodge Truck Tailgate
$5999ea
$3999ea
$7499ea
$9999
Many more clearance items instore and at kmscarparts.com
Trim Parts 67-72 GM
Truck Carpet
• Available in cutpile and loop
• Many colours to choose from
Reg. $199.99
1TRI-53006501
1TRI-53007501
1TRI-53007801
PUI Bench Seat Covers
)HEWK7RWK
$169
95
Save
$30
FOR CHEVY/GMC TRUCKS
• Factory original style
• Walrus grain black vinyl
• Other colours available 69-70
Save
$40
1PUI-69TS10B
Reg. $239.95
95
$199
71-72
Also available with
deluxe cloth inserts
95
$179
1PUI-71TS10B
Ask about
carpets available
for GM, Mopar, and Ford
GM and Mopar Trademarked
•U
USED TOOLS & EQUIPMENT
•CONSIGNMENTS/TRADE-INS
C
•MISSING
M
PARTS
•DISCONTINUED
•SURPLUS
•OUT OF BOX
6 Amp Battery Charger
• 12 Volt
• 6 Amp automatic
battery charger
Makita 12V Li-Ion Combo Kit
MADE IN
CANADA
Reg. $59.99
MID-CXC3500
• Includes subcompact drill/driver
(200 in/lbs) and impact driver
(800 in/lbs), two 12V Li-Ion
batteries, and charger
1/2
PRICE
Reg. $259.99
MAK-LCT209
$3995
$11995
Limited
Quantities
Save
33%
Jet 4 1/2" Knotted Wire Wheel
ANGLED DESIGN
Reg. $24.99
JET-099045
$595
•DAMAGED GOODS
S
•OLD PACKAGING
S
•DISPLAY MODELS
Save
76%
Limited Quantities
MADE IN
SPAIN
Jet Ceramic Flap Discs
LONGER LASTING THAN ZIRCONIUM
• 40 - 80 Grit
4 1/2"
Sa
5"
Reg. $9.99
Reg. $10.99
JET-50363 to JET-503473 to
JET-50367
JET-503477
$395
$449
up ve
to 60%
Limited
Quantities
Paul Donald Moore (Crazy Canadian Woodworker)
Paul Donald Moore was an icon in Canadian woodworking and will
be deeply missed. Our thoughts and prayers are with his family.
Thank you Paul for your dedication to the woodworking industry and
for filling our hearts with laughter.
facebook.com/CrazyCanadianWoodworker
Tools World
For
The
2014
KMS CAR
CALENDAR
Available
in-store.
Drop off your old tools
ls
at any KMS location
Thank you for your generosity!
y!
Old Tools Giving
New Hope
Proudly supported
t db
by
Overland West Freight Lines
es
KM
MS Tooll R
Repair
i is a factory authorized service centre
for many popular brands of powertools and outdoor power equipment (check
kmstools.com for complete list), and can service and repair many other brands
of tools and machinery. Tools to be repaired can be dropped off at Coquitlam,
Langley or Abbotsford KMS locations.
Group
Reward$
SAVE up to 30%
FREE 48 page monthly flyer
Exclusive e-mail notifications of HOT DEALS
Access to PROMOTIONS
& CONTESTS
Sign up your crew and in addition
to all the regular club benefits
EARN CREDIT
for your group with every purc
purchase
sign-up
sign
g up
p online or email [email protected]
km
[email protected]
KMS Tools Advertising Policy:
It is our intention to have every advertised item in stock. Occasionally, an
advertised item may not be available due to circumstances beyond our control. If this happens, KMS will offer a rain check or sell a similar
item at a comparable price. Special Purchases, Bonus items and Limited Quantity purchases may not be subject to the above conditions
due to the nature of the promotion, however we make every effort to clearly identify those items within the flyer. Prices are in effect
for the month of February, 2014. We reserve the right to limit quantities. In the event of an error, the intended price shall prevail. Lease
prices are estimates,, before
before taxes,, based on a 36 month term,, OAC.
OAC. Actual pr
p
oducts mayy n
ot be exactlyy as shown. Please call for details.
products
not
KMS Tools locations
VICTORIA 250-391-4555
KELOWNA 250-765-9665
604-522-5599
TOLL FREE: 1-800-567-8979
FAX: 1-800-567-3799
110 Woolridge Street, Coquitlam, BC
Mon-Fri 8:00 to 6:00 • Sat 9:00 to 5:00
TOLL FREE: 1-877-848-6657
1652 Island HWY, Victoria BC
Mon-Fri 7:30 to 5:30 • Sat 9:00 to 5:00
LANGLEY 604-534-4853
TOLL FREE: 1-888-530-6278
#110, 19860 Langley Bypass, Langley BC
Mon-Fri 7:30 to 5:30 • Sat 9:00 to 5:00
KMS CAR PARTS 604-522-5593
ABBOTSFORD 604-853-5598
RED DEER 403-347-3990
COQUITLAM STORE
& HEAD OFFICE
110 Woolridge Street, Coquitlam, BC
Mon-Fri 8:00 to 5:00 • Sat 9:00 to 5:00
TOLL FREE: 604-856-5988
30824 S. Fraser Way, Abbotsford, BC
Mon-Fri 7:30 to 5:30 • Sat 9:00 to 5:00
KMS TOOL REPAIR 604-395-4134 KAMLOOPS 250-374-7300
110 Woolridge Street, Coquitlam, BC
TOLL FREE: 1-888-567-8665
Mon-Fri 8:00 to 5:45 • Sat 9:00 to 5:00 1780 Versatile Drive, Kamloops BC
Mon-Fri 8:00 to 5:30 • Sat 9:00 to 5:00
KMS DISTRIBUTION
LOCATIONS:
Albertson's Building Centre
1187 Franklin's Gull Rd, Parksville BC
Parksville, BC | 250-248-6888
TOLL FREE: 1-888-922-9665
158 Penno Road, Kelowna, BC
Mon-Fri 8:00 to 5:30 • Sat 9:00 to 5:00
CALGARY 403-457-3537
TOLL FREE: 1-855-242-9301
6311 Centre Street SW., Calgary AB
Mon-Fri 7:30 to 5:30 • Sat 9:00 to 5:00
TOLL FREE: 1-888-344-3990
53 Burnt Park Drive, Red Deer, AB
Mon-Fri 8:00 to 5:30 • Sat 9:00 to 5:00
EDMONTON 780-455-8665
TOLL FREE: 1-877-655-8665
14520 111 Ave NW, Edmonton, AB
Mon-Fri 7:30 to 5:30 • Sat 9:00 to 5:00
Beaver Creek Home Centre
4643 Gertrude St, Port Alberni, BC
Port Alberni, BC | 250-724-1291