Micrometers
Transcription
Micrometers
MICROMETERS MICROMETER HEADS B B-1 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Micrometers Micrometer Heads CONTENTS Micrometers Micrometers High Accuracy Micrometer IP65 QuantuMike Fast Action Micrometer IP65 Micrometer Micrometer IP54 Quickmike Micrometer Adjustable Measuring Force Micrometer Ratchet Thimble Micrometer Economy Micrometers Mechanical Counter Micrometer Non-Rotating Spindle Micrometer IP65 Interchangeable Anvil Micrometer Anvil Extension Collar Micrometer Caliper Anvil Micrometers Interchangeable Anvil Universal Micrometer Screw Thread Micrometer IP65 Interchangeable Anvil Screw Thread Micrometer 3-Wire Units Paper Thickness Micrometer IP65 Disc Micrometer IP65 Interchangeable Anvil Gear Tooth Micrometer IP65 Non-Rotating Spindle Disc Micrometers IP65 Sheet Metal Micrometer IP65 Tube Micrometer IP65 Spline Micrometer IP65 Point Micrometer V-Anvil Micrometers IP65 Blade Micrometer Can Seam Micrometers Hub/Wire Micrometers IP65 Crimp Height Micrometer IP65 Uni-Mike Interchangeable Anvil Micrometer IP54 Indicating Micrometer IP54 Dial Snap Meter Groove Micrometers Quick-Mini Small Hole Gauge Set Telescoping Gauge Set Optional Accessories Quick Guide to Micrometers Micrometer Heads Selection Guide Rotatable Display Micrometer Head Micrometer Head Differential Screw Micrometer Head Small Micrometer Heads Adjustable Thimble Small Standard Micrometer Head Locking Screw Micrometer Head Carbide Tipped Spindle Micrometer Heads ø8 mm Spindle Medium Standard Micrometer Head Large Diameter Thimble Micrometer Head XY-Stage Micrometer Head Non-Rotating Spindle Micrometer Head Large Diameter Micrometer Heads Micro Jack Quick Guide to Micrometer Heads Micrometer Heads Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-2 B-3 B-5 B-7 B-9 B-11 B-13 B-15 B-16 B-19 B-20 B-21 B-24 B-27 B-29 B-30 B-31 B-33 B-34 B-35 B-37 B-39 B-41 B-43 B-46 B-48 B-50 B-53 B-55 B-56 B-57 B-58 B-59 B-61 B-62 B-64 B-65 B-66 B-67 B-74 B-81 B-82 B-83 B-84 B-85 B-88 B-89 B-90 B-92 B-93 B-94 B-95 B-96 B-98 B-99 B Micrometers SERIES 293 – ABSOLUTE Digimatic High-Accuracy Micrometer B •A world-leading 0.1 μm resolution makes this micrometer ideal for customers who need to make highly accurate measurements with a hand held tool. •The High-Accuracy Digimatic Micrometer utilizes Mitutoyo’s innovative 0.1 μm resolution ABS (absolute) rotary sensor*1 and high-accuracy screw machining technology to reduce the instrumental error to ±0.5 μm, delivering higher accuracy without sacrificing operability. *1 Patent pending in Japan, the United States of America, the European Union, and China. •A highly rigid frame and high-performance constant-force mechanism*2 enable more stable measurement, while the clicks emitted while the workpiece is being measured assure the operator that measurement is proceeding normally. •Transfer of body heat to the instrument is reduced by a (removable) heat shield, minimizing error caused by thermal expansion of the frame when performing handheld measurements. •The ABS sensor also eliminates the need to perform origin setting each time the power is turned on, letting you start measuring straight away. With no possibility of overspeed errors, this micrometer also delivers a higher level of reliability. •A range of features enables flexible measurement, including switchable resolution (0.0001/0.0005 mm), function lock and preset. *2 Patent pending in Japan, the United States of America, the European Union, and China. Function lock Technical Data Measuring force: Power supply: Battery life: 7 to 9N Lithium battery (CR2032) x 1 Approx. two years when used under normal conditions Functions Preset (ABS measurement system): The measurement origin can be preset to any value within the display range for convenience in measuring. Zero-setting (INC measurement system): The display can be zeroed at any position of the spindle, making comparison measurement easier. Returning to the absolute-measurement mode is easily accomplished. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility when the instrument must be moved away from the workpiece before the reading can be recorded. Resolution switching: The resolution of the display can be switched. If 0.1 μm measurement is not required, the resolution can be switched to 0.5 μm. Function lock: Functions such as preset or zero-set can be locked to avoid inadvertently changing the origin position. On/off: The power can be turned off after measurement is complete. Even after the power is turned off, the origin or last zero-set position remains in the memory. Auto power off: Even if the power is left on, the power turns off automatically if the micrometer is not used within a 20-minute period. Measurement data output: Measurement data can be output, allowing easy incorporation of this instrument into a statistical process control or measurement system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. 293-130 SPECIFICATIONS Code No. Range 293-130 0 - 25 mm (0 - 1") Resolution 0.0001 / 0.0005 mm (.000005" / .00002") switchable Accuracy* Measuring surface Mass Price ±0.5 µm (±.00002") ø3.2 mm 400 g £1320.00 * Excluding quantizing error B-3 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. DIMENSIONS Unit: mm 25 4 50.4 72.7 15.8 2.5 B 58.9 ø25 24 ø3.2 ø6.35 13.5 178 Standard accessories Heat shield (04AAB969B) x 1 Lithium battery (CR2032) x 1 Spanner (200877) x 1 Screwdriver (04AAB985) x 1 Lens paper (for the display) Inspection certificate Heat shield With heat shield* attached *Patent pending in Japan, the United States of America, the European Union, and China. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-4 Micrometers SERIES 293 – QuantuMike Fast Action Waterproof Digimatic Micrometer •A graduated scale is provided on the sleeve for use with a reference mark on the thimble so that every millimetre displacement can be checked to provide extra confidence. Reference mark •Those models that provide data output allow easy incorporation of this instrument into a statistical process control or measurement system. •There is a choice of convenient Interface Input Tools which enable the conversion of measurement data to keyboard signals and directly input them to cells in off-the-shelf spreadsheet software such as Excel. •Excellent resistance against oil, water and dust (IP65 protection level) enables this product to be used in machining situations that include splashing coolant fluid. •Measuring faces: Carbide. Spindle feed per revolution 1 revolution of thimble Conventional model QuantuMike 0.5 mm 2.0 mm •QuantuMike is equipped with a function lock feature to prevent the origin point being moved by mistake during measurement. Function lock • Dust-tight and water jet protected IP65 000 0021 60 6 B •Advanced pioneering technology has created the next generation of micrometer, the most revolutionary advance in micrometer technology since James Watt invented the instrument. •Faster measurement is achieved by using a coarser thread which feeds the spindle by 2 mm per revolution of the thimble. This increase in thread lead has been made possible thanks to new high precision thread-cutting and testing techniques. 293-180 Technical Data Dust/Water protection level: IP65 (IEC60529)*2 Measuring force: 7 to 12N Length standard: Electromagnetic rotary sensor Battery life: Approx. 1.2 years under normal use Standard accessories: Setting standard 1 pc (except for 0 - 25 mm / 0 - 1" models) Button type silver oxide battery (SR44, 938882), 1 pc Spanner (301336), 1 pc *2 Anti-corrosion treatment is required after use. Functions Origin point setting (ABS measurement system): Pressing the ORIGIN button resets the ABS origin at the current spindle position. Origin values can be set depending on each size. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility when the instrument must be moved away from the workpiece before the reading can be recorded. Function lock: This function allows the ORIGIN (origin point setting) function and the ZERO (zero setting) function to be locked to prevent these points being reset accidentally. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for approx. 20 minutes, but the origin point is retained. Turning the spindle causes the reading on the LCD to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. SPECIFICATIONS Inch/Metric Code No. Range With SPC data output 293-180 0 - 25 mm (0 - 1") 293-181 25 - 50 mm (1 - 2") 293-182 50 - 75 mm (2 - 3") 293-183 75 - 100 mm (3 - 4") Without SPC data output 293-185 0 - 25 mm (0 - 1") 293-186 25 - 50 mm (1 - 2") 293-187 50 - 75 mm (2 - 3") 293-188 75 - 100 mm (3 - 4") Resolution Accuracy*1 Flatness 0.001 mm (.00005") ±1 µm (±.00005") 0.3 µm (.000012") ±2 µm (±.0001") 0.001 mm (.00005") ±1 µm (±.00005") ±2 µm (±.0001") 0.3 µm (.000012") Parallelism Price 1 µm (.00004") £248.00 £265.00 £298.00 £331.00 2 µm (.00008") 1 µm (.00004") 2 µm (.00008") £167.00 £231.00 £243.00 £267.00 *1 Excluding quantizing error. B-5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. DIMENSIONS (Only for models with data output function) 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Unit: mm L a 27 3 48.5 37.5 23.1 B ø19.3 b 2.8 ø6.35 Optional Accessories Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Patented ratchet thimble mechanism* The patented ratchet thimble mechanism helps ensure repeatable results by transmitting microvibrations along the spindle to the contact face to provide a constant measuring force and encourage good contact with the workpiece. The ratchet works from the thimble as well as the speeder so it is always easy to use – even when making measurements one handed. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. * Patent registered (Japan, USA, China, Germany, UK and France) L 0 25 50 75 a 9 9.8 12.6 14 Measuring time on a multi-stepped workpiece with one hand Thanks to the quick movement, positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer. * According to Mitutoyo’s comparison test data for measuring time on typical workpieces. 293-181 Time [s] 60 Time needed to measure a multi-stepped cylindrical workpiece (with one hand) 53 sec. 50 Positioning time Measuring Time 40 30 41 sec. 22 sec. 20 Ratchet on thimble 293-182 10 Ratchet on speeder スピーダ部 ラチェット 293-183 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. 10 sec. 12 sec. 12 sec. Conventional model QuantuMike 0 Ratchet-induced micro-vibrations along the spindle help ensure repeatable measurements. シンブル部 ラチェット b 25 32 47 60 B-6 Micrometers SERIES 293 – IP65 Digimatic Micrometer •Based on new waterproof structural technology, this micrometer provides IP65 protection levels, enabling use in environments that include cutting oil, etc.* * Anti-corrosion treatment is required after use. • Dust-tight and water jet protected IP65 000 0021 60 6 B •±1 μm instrumental error (75 mm / 3" or less measuring range models). •Measuring data output function is available with a water-resistant data cable to maintain the IP65 protection level. •Oil-resistant materials are used in all plastic components. •Auto power ON/OFF function. •Further-Increased operability thanks to easy-to read LCD with 30% more character area. •Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. •Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off the-shelf spreadsheet software such as Excel. •Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble. •Measuring faces: Carbide 293-230 293-334 Technical Data Flatness: 0.3 μm / .000012" Dust/water protection level: IP65 (IEC60529) *2 Measuring force: 5 to 10N Battery life: Approx. 1.2 years under normal use Standard accessories: Setting standard, 1 pc (except for 0 - 25 mm (0 - 1") models) Button type silver oxide battery (SR44, 938882), 1 pc Spanner (301336), 1 pc *2 Anti-corrosion treatment is required after use. Functions Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility where the instrument must be moved away from the workpiece before the reading can be recorded. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading to reappear. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. Function lock*3: This function allows the ORIGIN (origin point setting) function and the ZERO (zero-setting ) function to be locked to prevent these points being reset accidentally. *3 All-digit preset type only. 293-230 293-231 293-233 293-354-10 293-232 B-7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Optional Accessories (Only for models with data output function) 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 . There are dedicated SPC data cables for Coolant Proof micrometers. SPECIFICATIONS Metric Code No. Range Resolution With SPC data output 293-230 0 - 25 mm (0 - 1") 293-231 25 - 50 mm (1 - 2") 293-232 50 - 75 mm (2 - 3") 293-233 75 - 100 mm (3 - 4") Accuracy* ±1 µm (±.00005") 0.001 mm (.00005") Parallelism 1 µm (.00004") ±2 µm (±.0001") 2 µm (.00008") Accuracy* Parallelism Constant-force device Mass Price Ratchet stop 270 g 330 g 470 g 625 g £207.00 £220.00 £251.00 £350.00 Mass Price Inch/Metric Code No. Range Resolution With SPC data output 293-330 0 - 25 mm (0 - 1") 293-331 25 - 50 mm (1 - 2") 293-332 50 - 75 mm (2 - 3") 293-333 75 - 100 mm (3 - 4") 293-350-10 100 - 125 mm (4 - 5") 293-351-10 125 - 150 mm (5 - 6") 293-352-10 150 - 175 mm (6 - 7") 293-353-10 175 - 200 mm (7 - 8") 293-354-10 200 - 225 mm (8 - 9") 293-355-10 225 - 250 mm (9 - 10") 293-356-10 250 - 275 mm (10 - 11") 293-357-10 275 - 300 mm (11 - 12") 293-334 0 - 25 mm (0 - 1") 293-335 0 - 25 mm (0 - 1") 293-336 25 - 50 mm (1 - 2") Without SPC data output 293-340 0 - 25 mm (0 - 1") 293-341 25 - 50 mm (1 - 2") 293-342 50 - 75 mm (2 - 3") 293-343 75 - 100 mm (3 - 4") 293-344 0 - 25 mm (0 - 1") 293-345 25 - 50 mm (1 - 2") 293-346 50 - 75 mm (2 - 3") 293-347 75 - 100 mm (3 - 4") 293-348 0 - 25 mm (0 - 1") Constant-force device 270 g 330 g 470 g 2 µm (.00008") 625 g 600 g ±2 µm (±.0001") 3 µm 740 g (.00012") Ratchet stop 800 g ±3 µm (±.00015") 970 g 0.001 mm 1100 g 4 µm (.0001") (.00016") 1270 g ±4 µm (±.0002") 1340 g 5 µm (.0002") 1540 g Ratchet thimble 275 g ±1 µm 1 µm 275 g 0.001 mm (±.00005") (.00004") Friction thimble (.00005") 335 g £207.00 £220.00 £251.00 £320.00 £390.00 £395.00 £430.00 £440.00 £450.00 £460.00 £470.00 £490.00 £207.00 £250.00 £220.00 270 g 330 g 470 g 625 g 275 g 335 g 475 g 639 g 275 g £139.00 £195.00 £230.00 £259.00 £139.00 £195.00 £230.00 £259.00 £139.00 ±1 µm (±.00005") 0.001 mm (.00005") ±1 µm (±.00005") ±2 µm (±.0001") 0.001 mm (.00005") ±1 µm (±.00005") 1 µm (.00004") 1 µm (.00004") 2 µm (.00008") 1 µm (.00004") 2 µm (.00008") Ratchet stop Ratchet thimble ±2 µm (±.0001") ±1 µm (±.00005") 1 µm (.00004") Friction thimble * Excluding quantizing error. Note: All-Digit preset type – models over 125 mm (5") measuring range DIMENSIONS Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm Ratchet stop type over 100 mm 14.5 2 27.5 47.2 2.3 3 43 5 0 C 45 17 ø18 L a ø6.35 b Unit: mm Ratchet / Friction thimble type Ratchet stop type Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-8 L 0 25 50 75 132.8 158.2 183.6 208.8 234.2 258 284 309 a 2.8 2.8 2.8 2.8 5.3 5.7 6.1 6.3 6.7 5.5 6.5 6.5 b 9 9.8 12.6 14 16.7 18.8 19.1 18.2 16.8 18 18 18 c 25 32 47 60 76 90 102 115 127 139 152 166 B Micrometers SERIES 293 – Digimatic Micrometer •Easily integrated into a statistical process control or networked measurement system. •Constant-force device: ratchet stop •Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. •Measuring faces: Carbide Technical Data Resolution: Measuring force: Battery: Battery life: 0.001 mm (.0001") 10 to 15N SR44 (2 pcs) 938882 Approx. 1.8 years under normal use Functions B 293-782 SPECIFICATIONS Inch/Metric Code No. 293-782 293-783 293-784 293-785 293-786 293-787 293-788 293-789 Range 300 - 325 mm (12 - 13") 325 - 350 mm (13 - 14") 350 - 375 mm (14 - 15") 375 - 400 mm (15 - 16") 400 - 425 mm (16 - 17") 425 - 450 mm (17 - 18") 450 - 475 mm (18 - 19") 475 - 500 mm (19 - 20") Accuracy*1 Flatness 5 µm (.0002") ±6 µm (±.0003") ±7 µm (±.00035") Price £600.00 £602.00 £615.00 £622.00 £631.00 £644.00 £655.00 £660.00 Parallelism 0.6 µm (.000024") ±8 µm (±.0004") 6 µm (.00024") 7 µm (.00028") Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility where the instrument must be moved away from the workpiece before the reading can be recorded. Function lock: This function allows the ORIGIN (origin point setting) function and the ZERO (zero-setting ) function to be locked to prevent these points being reset accidentally. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. * Excluding quantizing error. Optional Accessories DIMENSIONS Unit: mm L 28 18 28 2 55.3 3 50 17 ø12 ø21 35 ø8 5 04AZB512: 04AZB513: 959149: 959150: 02AZD790E: L-type SPC data cable (1 m) £65.00 L-type SPC data cable (2 m) £68.00 SPC data cable with pushbutton* (1 m) £34.60 SPC data cable with pushbutton* (2 m) £39.40 SPC data cable for U-WAVE-T (160 mm) £52.20 a * May interfere with operating the thimble. 330° Range 300 - 325 mm 325 - 350 mm 350 - 375 mm 375 - 400 mm B-9 L 353 378 403 428 a 187 199 212 224 Range 400 - 425 mm 425 - 450 mm 450 - 475 mm 475 - 500 mm L 453 478 503 528 a 236 248 261 273 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 293 – Digimatic Micrometer Technical Data Measuring force: Battery: Battery life: 5 to 10N SR44 (1 pc) 938882 Approx. 1.8 years under normal use Functions •Simple design, such as not incorporating data output, achieves low cost. •Provided only with an origin-set button for easy origin setting. •Increased operability thanks to easy-to-read LCD with 30% more character display area. •Equipped with Ratchet Stop for constant measuring force. •Measuring faces: Carbide Zero setting: A brief press on the ORIGIN button sets display to zero at the current spindle position (zero-setting), which allows easy comparison measurement. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading is retained. Turning the spindle causes the reading on the LCD to reappear. B 293-821 293-832 SPECIFICATIONS Metric Code No. 293-821 Range 0 - 25 mm Resolution 0.001 mm Accuracy* ±2 µm Constant-force device Ratchet stop Price £89.60 Range Resolution Accuracy* 0 - 25 mm (0 - 1") 0.001 mm (.00005") ±2 µm (±.0001") Constant-force device Ratchet stop Friction thimble Price £89.60 £89.60 Inch/Metric Code No. 293-831 293-832 * Excluding quantizing error. DIMENSIONS Unit: mm Ratchet stop type 43 275g Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. 17 143.2 ø18 30.7 2.8 ø6.35 (58.7) 25 9 Friction thimble type 42.5 2.3 3 B-10 Micrometers SERIES 293 – ABSOLUTE Digimatic Quickmike Micrometer •The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation, which enables widely differently sized features to be measured quickly. •Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error. •Measuring faces: Carbide. •Supplied with a Ratchet Stop for constant measuring force. B Technical Data Resolution: 0.001 mm (.00005") Accuracy: Refer to the list of specifications. Measuring force: 5 to 15N Battery: SR44 (1 pc) 938882 Battery life: Approx. 3 years under normal use (1 year for models over 20 mm measuring range) Max. response speed: Without limit Optional Accessories 937387: 965013: 06ADV380E: 02AZD790E: 02AZE140E: 293-676 SPC data cable (1 m) £32.90 SPC data cable (2 m) £39.10 USB Input Tool Direct USB-ITN-E (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £107.00 293-677 293-678 293-679 B-11 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SPECIFICATIONS Inch/Metric Code No. 293-676 293-677 293-678 293-679 Range 0 - 30 mm (0 - 1.2") 25 - 55 mm (1 - 2.2") 50 - 80 mm (2 - 3.2") 75 - 105 mm (3 - 4.2") Accuracy*1 ±2 µm (±.0001") ±3 µm (±.00015") Flatness Parallelism 0.3 µm (±.000012") 2 µm (.00008") 3 µm (.00012") Price £247.00 £349.00 £375.00 £401.00 Mass 275 g 355 g 525 g 625 g * Excluding quantizing error. B DIMENSIONS Unit: mm Measuring range: 0 - 30 mm 6.2 34.8 Range 0-30mm 69.6 3.3 42.9 4.2 69.6 3.3 42.9 4.2 25 ø24.9 ø6.35 2.8 Measuring range: 25 - 55 mm and over ø24.9 ø6.35 L Range c b a Range 25 - 55 mm 50 - 80 mm 75 - 105 mm Non-rotating spindle The non-rotating spindle enables even inexperienced operators to perform measurements repeatably and accurately. ABSOLUTE scale with origin point Scale Detector Quick feed mechanism Lead screw 10 mm ORIGIN Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-12 L 59.8 84.8 109.8 a 2.8 b 8.5 10.3 10.7 c 36 47 60 Micrometers SERIES 227 – ABSOLUTE Digimatic Adjustable Measuring Force Micrometer •Digimatic micrometer dedicated to applications requiring a constant/low measuring force such as measuring wire, paper, and plastic/rubber parts. •Ratchet mechanism in the thimble applies constant force to workpiece. •Measuring force is adjustable (in steps) to suit various kinds of workpiece. •High-accuracy measurement can be performed even by unskilled operators due to the repeatability of the automatically applied measuring force. •Compact and easy to handle. •Non-rotating spindle. •Measuring faces: Carbide B Technical Data Flatness: 0.3 μm (.000012") Parallelism: 2 μm (.00008") Measurement posture:Horizontal orientation only (recommended spindle inclination: within ±3°) Battery: SR44 (1 pc), 938882 Battery life: Approx. 3 years under normal use (1 year for 227-213/6/7) Functions Adjustable measuring force mechanism Hold Origin point setting ABS measurement system Low voltage alarm Data output Presetting (227-213/6/7) 227-211 SPECIFICATIONS Inch/Metric Code No. Range Measuring force range Resolution Accuracy* Measuring force Accuracy of the selected measuring force*1 Repeatability of measuring force*1 Mass Price 227-211 227-213 15 - 30 mm 0 - 15 mm (0 - .6") (.6 - .1.2") 0.5 - 2.5 N 227-215 0 - 10 mm (0 - .4") 227-216 10 - 20 mm (.4 - .8") 2 - 10 N 227-217 20 - 30 mm (.8 - 1.2") 0.001 mm (.00005") ±2 µm (±.0001") 0.5, 1.0, 1.5, 2.0, 2.5 N ± (0.1 + the selected measuring force/10) N Within 0.1 N 300 g 380 g £656.00 £810.00 2, 4, 6, 8, 10 N ± (0.4 + the selected measuring force/10) N 340 g £682.00 Within 0.4 N 425 g £720.00 415 g £790.00 * Excluding quantizing error. *1These values are guaranteed when used in a horizontal orientation (within ±3 degrees) DIMENSIONS Measuring force is generated by the action of trapping a workpiece between the spindle face and the anvil. The constant-force unit applies the specified measuring force. When the preset measuring force is reached, the value on the LCD is automatically held and the hold symbol appears. (To cancel the hold, reverse the thimble more than 1/10 revolution and press the hold button.) B-13 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Unit: mm 32 L 69.6 54 18.1 4 b N 1.0 2.0 a ø24.5 9 0.5 1.5 2.5 B 1.0 2.0 0.5 1.5 2.5 N SPC data cable (1 m) £32.90 SPC data cable (2 m) £39.10 USB Input Tool Direct USB-ITN-E (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £107.00 ø6.35 937387: 965013: 06ADV380E: 02AZD790E: 02AZE140E: DIMENSIONS 25 Optional Accessories Stroke-limiting bush Measuring force control Range 0-15 mm 0-10 mm 65.6 63.8 54 b 17 22 18.1 b 0.5 1.5 2.5 N 1.0 2.0 36 0.5 1.5 2.5 N 1.0 2.0 a L a 2 2 ø24.5 8.5 L 15 10 Measuring force control Stroke-limiting bush Range 15-30 mm 10-20 mm 20-30 mm Adjustable measuring force To preset the measuring force, adjust the measuring force setting scale on the thimble with the screwdriver supplied. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-14 L 30 20 30 a 12.8 17.8 7.8 b 17 22 22 Micrometers SERIES 102 – Ratchet Thimble Micrometer •More accurate in one-handed operation: inexperienced operators measure significantly more accurately with this micrometer. •Heat-insulated frame. •Ratchet function works both from the thimble and the speeder. •Rotating the thimble/speeder when the workpiece is between the anvil and spindle causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece. •Clearly audible ratchet operation for reassurance that measurement is being performed at constant, preset force. •The speeder is always available for quick rotation of spindle. •A simple mechanism, which requires neither parts maintenance nor special technique, is employed in the constant-force device. •Measuring faces: Carbide B Ratchet Speeder Technical Data Flatness: Parallelism: Measuring force: 0.6 μm / .000024" 2 μm / .00008" 5-10N Internal structure Thimble sleeve Speeder sleeve Ratchet mechanism Greatly improved accuracy and repeatability Measurement results of one-handed operation A beginner performed a test by measuring a workpiece 20 times using a conventional micrometer and a Ratchet Thimble Micrometer. Table showing results of test 25 Number of measurements 102-701 Thimble Micrometer Conventional micrometer (non-constant-force device) 20 15 10 5 0 -4 -3 -2 -1 0 +1 +2 Measurement error (µm) +3 +4 SPECIFICATIONS Metric Code No. 102-701 102-707 102-702 102-708 Range 0 - 25 mm 25 - 50 mm Graduation 0.01 mm 0.001 mm 0.01 mm 0.001 mm Accuracy Graduation Accuracy .0001" ±.0001" Price £54.00 £60.20 £61.70 £78.10 Mass 180 g ±2 µm 270 g Inch Code No. 102-717 102-718 Range 0 - 1" 1 - 2" Price £60.20 £78.10 Mass 180 g 270 g DIMENSIONS 30.3 2.8 27.5 14.5 3 15 Unit: mm 50 ø19 ø6.35 5 26 7 30 25-50mm measuring range model 8 55.3 27.5 2.8 25 11 B-15 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 102 – Economy Micrometer •Cut-away frame (behind anvil) for measuring in hard-to-reach places. •Heat-insulated frame. •Measuring faces: Carbide. B Ratchet stop type. 102-301 SPECIFICATIONS Metric Code No. 102-301 102-311 102-302 102-312 102-303 102-304 Range Graduation 0.01 mm 0.001 mm 0.01 mm 0.001 mm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 0.01 mm Accuracy ±2 µm ±1 µm ±2 µm ±1 µm ±2 µm ±3 µm Flatness 0.6 µm 0.3 µm 0.6 µm 0.3 µm Parallelism 2 µm 1 µm 2 µm 1 µm 2 µm 3 µm 0.6 µm Price £54.00 £68.50 £61.70 £70.70 £79.50 £88.90 Constant-force device Ratchet stop DIMENSIONS Unit: mm L 27.5 14.5 3 47 17 c ød a ø18 b Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-16 L 30.3 55.3 80 105 a 2.8 2.5 b 5 8 9 10 c 26 32 45 58 d 6.35 Micrometers SERIES 103 – Economy Micrometer •Baked-enamel-finished frame. •Measuring faces: Carbide. Technical Data •Equipped with Ratchet Stop for constant measuring force. Flatness: Parallelism*: 0.6 μm / .000024" for models up to 300 mm / 12", 1 µm / 00004" for models over 300 mm / 12" (2+R/100) µm / [.00008+.00004 (R/4)]" * R = max. range (mm/inch) Note: Fractions rounded down B 103-137 SPECIFICATIONS Metric Code No. Range With ratchet stop 103-137 0 - 25 mm 103-129 103-138 25 - 50 mm 103-130 103-139-10 50 - 75 mm 103-140-10 75 - 100 mm 103-141-10 100 - 125 mm 103-142-10 125 - 150 mm 103-143-10 150 - 175 mm 103-144-10 175 - 200 mm 103-145-10 200 - 225 mm 103-146-10 225 - 250 mm 103-147-10 250 - 275 mm 103-148-10 275 - 300 mm 103-149 300 - 325 mm 103-150 325 - 350 mm 103-151 350 - 375 mm 103-152 375 - 400 mm 103-153 400 - 425 mm 103-154 425 - 450 mm 103-155 450 - 475 mm 103-156 475 - 500 mm 103-157 500 - 525 mm 103-158 525 - 550 mm 103-159 550 - 575 mm 103-160 575 - 600 mm 103-161 600 - 625 mm 103-162 625 - 650 mm 103-163 650 - 675 mm 103-164 675 - 700 mm 103-165 700 - 725 mm 103-166 725 - 750 mm 103-167 750 - 775 mm 103-168 775 - 800 mm 103-169 800 - 825 mm 103-170 825 - 850 mm 103-171 850 - 875 mm 103-172 875 - 900 mm 103-173 900 - 925 mm 103-174 925 - 950 mm 103-175 950 - 975 mm 103-176 975 - 1000 mm Inch Graduation Accuracy 0.01 mm 0.001 mm 0.01 mm ±2 µm 0.001 mm ±3 µm ±4 µm ±5 µm ±6 µm ±7 µm ±8 µm 0.01 mm ±9 µm ±10 µm ±11 µm ±12 µm ±13 µm ±14 µm ±15 µm Price £40.40 £46.40 £54.20 £60.20 £71.40 £80.10 £87.30 £97.70 £107.00 £122.00 £133.00 £136.00 £144.00 £158.00 £196.00 £207.00 £218.00 £236.00 £242.00 £250.00 £268.00 £278.00 £296.00 £311.00 £333.00 £355.00 £520.00 £540.00 £570.00 £600.00 £630.00 £650.00 £680.00 £700.00 £730.00 £750.00 £780.00 £800.00 £830.00 £860.00 £890.00 £910.00 Code No. Range With ratchet stop 103-177 0 - 1" 103-131 103-178 1 - 2" 103-132 103-179 2 - 3" 103-180 3 - 4" 103-181 4 - 5" 103-182 5 - 6" 103-183 6 - 7" 103-184 7 - 8" 103-185 8 - 9" 103-186 9 - 10" 103-187 10 - 11" 103-188 11 - 12" 103-189 12 - 13" 103-190 13 - 14" 103-191 14 - 15" 103-192 15 - 16" 103-193 16 - 17" 103-194 17 - 18" 103-195 18 - 19" 103-196 19 - 20" 103-197 20 - 21" 103-198 21 - 22" 103-199 22 - 23" 103-200 23 - 24" 103-201 24 - 25" 103-202 25 - 26" 103-203 26 - 27" 103-204 27 - 28" 103-205 28 - 29" 103-206 29 - 30" 103-207 30 - 31" 103-208 31 - 32" 103-209 32 - 33" 103-210 33 - 34" 103-211 34 - 35" 103-212 35 - 36" 103-213 36 - 37" 103-214 37 - 38" 103-215 38 - 39" 103-216 39 - 40" With friction thimble 103-135 0 - 1" 103-136 1 - 2" Graduation Accuracy .001" .0001" .001" .0001" ±.0001" ±.00015" ±.0002" ±.00025" ±.0003" ±.00035" ±.0004" .001" ±.00045" ±.0005" ±.00055" ±.0006" ±.00065" ±.0007" ±.00075" .001"* ±.0001" Price £40.40 £46.40 £54.20 £60.20 £71.40 £80.10 £87.30 £97.70 £107.00 £122.00 £133.00 £136.00 £144.00 £158.00 £196.00 £207.00 £218.00 £236.00 £242.00 £250.00 £268.00 £278.00 £296.00 £311.00 £333.00 £355.00 £520.00 £540.00 £570.00 £590.00 £610.00 £620.00 £640.00 £660.00 £680.00 £700.00 £730.00 £760.00 £790.00 £810.00 £830.00 £850.00 £55.00 £80.00 *.0001 reading is obtained with vernier, B-17 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SET SPECIFICATIONS Metric Code No. 103-927-10 Range 0 - 75 mm (3 pcs./set) 103-913-50 0 - 150 mm (6 pcs./set) Price £203.00 Models included 103-137, 103-138, 103-139-10, 2 micrometer setting standards 103-137, 103-138, 103-139-10, 103-140-10, 103-141-10, 103-142-10, 5 micrometer setting standards 103-143-10, 103-144-10, 103-145-10, 103-146-10, 103-147-10, 103-148-10, 6 micrometer setting standards All micrometers in 103-913-50 and 103-915-10 in one set, 11 micrometer setting standards 103-915-10 150 - 300 mm (6 pcs./set) 103-914-50 0 - 300 mm (12 pcs./set) £480.00 £977.00 B £1390.00 Inch Code No. 103-929 Range 0 - 3" (3 pcs./set) 103-904-10 0 - 6" (6 pcs./set) 103-906 6 - 12" (6 pcs./set) 103-905-10 0 - 12" (12 pcs./set) Price £203.00 Models included 103-177, 103-178, 103-179, 2 micrometer setting standards 103-177, 103-178, 103-179, 103-180, 103-181, 103-182, 5 micrometer setting standards 103-183, 103-184, 103-185, 103-186, 103-187, 103-188, 6 micrometer setting standards All micrometers in 103-904-10 and 103-906 in one set, 11 micrometer setting standards £480.00 £977.00 £1390.00 DIMENSIONS 775 825 875 925 975 1025 L 14.5 3 17 ø18 ø6.35 c Models 75 to 300 mm 17 b L 14.5 3 a 47 b 17 27.5 ø12 47 L ø6.35 ø18 a c 5 c 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 47 27.5 a d L 18 b 307 332 355 382 405 28 430 Models over 300 mm measuring range L b 28 35 a 455 480 5 505 530 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-18 3 50 ø21 725 6.5 Unit: mm Models up to 75 mm measuring range ø8 675 5.3 5.7 6.1 6.3 6.7 5.5 c 28 38 46 57 76 90 102 115 127 139 152 18 166 187 199 212 14.52243 28 236 27.5 248 261 273 c 625 2.5 b 9 10 12 14 16.7 18.8 19.1 18.2 16.8 18 ø12 575 a ø18 L 30 55 80 105 132.8 158.2 183.6 208.8 234.2 258 284 309 353 378 403 428 a 453 478 503 528 c Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm 300 - 325 mm 325 - 350 mm 350 - 375 mm 375 - 400 mmb 400 - 425 mm 425 - 450 mm 450 - 475 mm 475 - 500 mm 500 - 525 mm 525 - 550 mm 550 - 575 mm 575 - 600 mm 600 - 625 mm 625 - 650 mm 650 - 675 mm 675 - 700 mm 700 - 725 mm 725 - 750 mm 750 - 775 mm 775 - 800 mm 800 - 825 mm 825 - 850 mm 850 - 875 mm 875 - 900 mm 900 - 925 mm 925 - 950 mm 950 - 975 mm 975 - 1000 mm 17 Micrometers SERIES 193 – Mechanical Counter Micrometer •Mechanical digit counter with 0.01 mm or .001" resolution for quick and error-free reading. •Measuring faces: Carbide. Technical Data •Equipped with Ratchet Stop for constant measuring force. Counter reading : Flatness: Parallelism*: 0.01 mm or .001" 0.6 μm (.000024") (2+R/100) µm , [.00008+.00004 (R/4)]" * R = max. range (mm/inch) Note: Fractions rounded down B 193-101 193-111 193-112 SPECIFICATIONS Metric Inch Code No. Range With ratchet stop 193-101 0 - 25 mm 193-111 193-102 25 - 50 mm 193-112 193-103 50 - 75 mm 193-113 193-104 75 - 100 mm 193-114 Graduation Accuracy 0.01 mm 0.001 mm 0.01 mm 0.001 mm 0.01 mm 0.001 mm 0.01 mm 0.001 mm ±2 µm ±3 µm Price £115.00 £115.00 £139.00 £139.00 £155.00 £155.00 £170.00 £170.00 Code No. Range With friction thimble 193-211 0 - 1" 193-212 1 - 2" With ratchet stop 193-213 2 - 3" 193-214 3 - 4" Price Graduation Accuracy .0001" ±.0001" £115.00 £139.00 .0001" ±.0001" ±.00015" £142.00 £152.00 DIMENSIONS Unit: mm b L 3 17 ø18 27.5 47 c ø6.35 a 25.5 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-19 L 30 55 80 105 a 2.5 2.0 b 5 8 9 c 26 32 45 57 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 406 – Digimatic Non-Rotating Spindle Micrometer Technical Data Battery: SR44 (1 pc) 938882 •Non-rotating spindle. •Equipped with Ratchet Stop for constant measuring force. Optional Accessories 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 B 406-350 SPECIFICATIONS Inch/Metric Code No. 406-350 406-351 406-352 406-353 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Accuracy* Flatness Parallelism 0.001 mm (.00005") ±3 µm (±.00015") 0.3 µm (.000012") 3 µm (.00012") ±4 µm (±.0002") 4 µm (.00016") Price £552.00 £600.00 £624.00 £653.00 * Excluding quantizing error. DIMENSIONS Unit: mm Models up to 75 mm measuring range b L a 41.5 42.5 2.3 3 41 11.5 17 14.2 5 0 c ø18 ø14 ø6.35 45 75 - 100 mm measuring range L 14.5 6.5 47.2 2.3 3 41 11.5 17 27.5 ø6.35 a 5 0 c 45 ø18 b Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-20 L 58.5 83.5 108.5 105.3 a 2.8 b 7 9.8 11.2 14.1 c 32 47 60 57 Micrometers SERIES 340 – Digimatic Interchangeable Anvil Micrometer •Wide measuring range with interchangeable anvils. •Measuring face of the spindle is carbide tipped (standard model). Technical Data •IP65 water/dust protection.* •Equipped with Ratchet Stop for constant measuring force. Flatness: Parallelism: Accuracy*1: Battery: * Only models with a measuring range up to 300 mm. B • Dust-tight and water jet protected IP65 0021 Note: Fractions rounded down * R = max. range (mm/inch) *1Excluding quantizing error 60 6 000 0.6 μm (.000024") for models up to 300 mm (12"), 1.0 μm (.00004") for models over 300 mm (12") 2 μm (.00008") for models up to 75 mm (3"), 3 μm (.00012") for models up to 150 mm (6"), (2+R/100) μm* / ±[.00008”+.00004 (R/4)]"* for models over 150 mm (6”) ±(4+R/75) µm* / ±[.00016"+.00004(R/3)]"* SR44 (1 pc), 938882 Dimensions See page B-23 Optional Accessories 340-351-10 SPECIFICATIONS Inch/Metric Code No. Range Interchangeable anvils Resolution Setting standards Micrometer head stroke Price IP65 rated 340-351-10 0 - 150 mm (0 - 6") 340-352-10 150 - 300 mm (6 - 12") Unrated 340-720 340-721 340-722 340-723 300 - 450 mm (12 - 18") 450 - 600 mm (18 - 24") 600 - 750 mm (24 - 30") 750 - 900 mm (30 - 36") 0.001 mm. (00005") 0.001 mm (.0001") 0.001 mm (.0001") 5 pcs. 6 pcs. 6 pcs. 6 pcs. 6 pcs. 25 mm (1") 25 mm (1") £496.00 £746.00 £964.00 £1060.00 £1190.00 £1270.00 Data cables for 340-351-10 and 340-352-10 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Connecting cables for 340-720 / -721 / -722 / -723 04AZB512: 04AZB513: 959149: 959150: L-type SPC data cable (1 m) £65.00 L-type SPC data cable (2 m) £68.00 SPC data cable with pushbutton*2 (1 m) £34.60 SPC data cable with pushbutton*2 (2 m) £39.40 *2 May interfere with operating the thimble. L-type 340-722 B-21 Straight type Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 104 – Interchangeable Anvil Micrometer Technical Data Flatness: Parallelism: Accuracy*1: 0.6 μm (.000024") for models up to 300 mm (12"), 1.0 μm (.00004") for models over 300 mm (12") 2 μm (.00008") for models up to 75 mm (3"), 3 μm (.00012") for models up to 150 mm (6"), (2+R/100) μm* / ±[.00008”+.00004 (R/4)]"* for models over 150 mm (6”) ±(4+R/75) µm* / ±[.00016"+.00004(R/3)]"* •Wide measuring range with interchangeable anvils. •Measuring face of the spindle is carbide tipped (standard model). •Equipped with Ratchet Stop for constant measuring force. B 104-136 * R = max. range (mm/inch) Note: Fractions rounded down Dimensions See page B-23 SPECIFICATIONS Metric Code No. Range 104-139A 104-135A 104-161A 104-140A 104-136A 104-141A 104-142A 104-143A 104-144A 104-145A 104-146A 104-147A 104-148A 0 - 100 mm 0 - 150 mm 50 - 150 mm 100 - 200 mm 150 - 300 mm 200 - 300 mm 300 - 400 mm 400 - 500 mm 500 - 600 mm 600 - 700 mm 700 - 800 mm 800 - 900 mm 900 - 1000 mm 0.01 mm Code No. Range Graduation 104-149 104-137 104-162 104-150 104-138 104-151 104-152 104-201 104-153 104-202 104-154 104-155 104-203 104-156 104-204 104-157 104-158 104-205 0 - 4" 0 - 6" 2 - 6" 4 - 8" 6 - 12" 8 - 12" 12 - 16" 12 - 18" 16 - 20" 18 - 24" 20 - 24" 24 - 28" 24 - 30" 28 - 32" 30 - 36" 32 - 36" 36 - 40" 36 - 42" Graduation Interchangeable Setting standard anvils 4 pcs. 3 pcs. 6 pcs. 5 pcs. 4 pcs. 4 pcs. 6 pcs. 6 pcs. Micrometer head stroke 25 mm 4 pcs. 4 pcs. Price £210.00 £310.00 £290.00 £280.00 £346.00 £283.00 £422.00 £491.00 £619.00 £685.00 £830.00 £974.00 £1120.00 Inch Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. .001" Interchangeable Setting standard anvils 4 pcs. 3 pcs. 6 pcs. 5 pcs. 4 pcs. 4 pcs. 6 pcs. 6 pcs. 4 pcs. 4 pcs. 6 pcs. 4 pcs. 6 pcs. 6 pcs. 4 pcs. 6 pcs. 4 pcs. 4 pcs. 6 pcs. 4 pcs. 6 pcs. 6 pcs. 4 pcs. 6 pcs. 4 pcs. 4 pcs. 6 pcs. 6 pcs. B-22 Micrometer head stroke 1" Price £210.00 £310.00 £290.00 £280.00 £346.00 £283.00 £422.00 £562.00 £491.00 £670.00 £619.00 £685.00 £710.00 £830.00 £930.00 £974.00 £1120.00 £1160.00 Micrometers SERIES 340, 104 – Interchangeable Anvil Micrometer DIMENSIONS Unit: mm 104-135A 164.5 L 14.5 27.5 47 3 ø6.3 9 ø8 A 17 ø18 18 2 18.5 5 0 ø18 ø6.35 45 93 B Models from 400 to 1000 mm measuring range 18 28 9 B L 28 35 2 55.3 3 50 17 C 8 ø8 ø21 3 A 330° Interchangeable anvils Range Range L : Range (mm) 50 - 75 75 - 100 200 - 225 225 - 250 303952 303953 85 60 M3 M4 0 to 150 mm models 150 to 300 mm models Code No. A: Overall length (mm) Interchangeable anvil 0 - 25 150 - 175 303950 135 M1 25 - 50 175 - 200 303951 110 M2 300 to 400 mm models 400 to 500 mm models 500 to 600 mm models 600 to 700 mm models 700 to 800 mm models 800 to 900 mm models 900 to 1000 mm models Code No. A: Overall length (mm) Interchangeable anvil 300 - 325 400 - 425 500 - 525 600 - 625 700 - 725 800 - 825 900 - 925 304001 87 M3 L : Range (mm) 325 - 350 350 - 375 425 - 450 450 - 475 525 - 550 550 - 575 625 - 650 650 - 675 725 - 750 750 - 775 825 - 850 850 - 875 925 - 950 950 - 975 304002 304003 62 37 M4 M5 B-23 375 - 400 475 - 500 575 - 600 675 - 700 775 - 800 875 - 900 975 - 1000 304004 12 M6 100 - 125 250 - 275 303954 35 M5 125 - 150 275 - 300 303955 10 M6 B 425 525 625 725 825 925 1025 C 224 273 332 382 430 480 530 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 105 – Anvil Extension Collar Micrometer Technical Data Flatness: Parallelism*: Accuracy*: 1.3 μm (2+R/100) μm ±(6+R/75) μm •Wide measuring range with anvil extension collars. •50 mm spindle stroke. •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. * R = max. range (mm) Note: Fractions rounded down Anvil extension collar B Extension collar Measuring range 700 to 750 mm with 105-105 Measuring range 750 to 800 mm with 105-105 105-105 SPECIFICATIONS Metric Code No. 105-103 105-104 105-105 105-106 105-107 Range 500 - 600 mm 600 - 700 mm 700 - 800 mm 800 - 900 mm 900 - 1000 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Graduation Extension collars Setting standard 0.01 mm 1 pc (50 mm) 2 pcs. B-24 Price £742.00 £772.00 £810.00 £889.00 £1020.00 Micrometers SERIES 105 – Anvil Extension Collar Micrometer Technical Data •Wide measuring range with anvil extension collars. •50 mm / 2" spindle stroke. •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. Flatness: 1.3 μm / .000052" Parallelism*: (2+R/100) μm / [.00008+.00004(R/4)]" Accuracy*: ±(6+R/75) μm / ±[.0003+.00005(R/3)]" * R = max. range (mm/inch) Note: Fractions rounded down B 105-408 DIMENSIONS Unit: mm Over 1200 mm up to 2000 mm 100 50 L 7 28 3 83 17 60 ø 21 5 0 45 Anvil extension collar (100mm) Anvil extension collar (50mm) a 8 ø8 28 ø8 25.5 Range 1000 - 1200 mm 1200 - 1400 mm 1400 - 1600 mm 1600 - 1800 mm 1800 - 2000 mm B-25 L 1225 1425 1625 1825 2025 a 500 - 600 600 - 700 700 - 800 800 - 900 900 - 1000 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SPECIFICATIONS Metric Code No. Range 100 mm range models 105-408 1000 - 1100 mm 105-409 1100 - 1200 mm 105-410 1200 - 1300 mm 105-411 1300 - 1400 mm 105-412 1400 - 1500 mm 105-413 1500 - 1600 mm 105-414 1600 - 1700 mm 105-415 1700 - 1800 mm 105-416 1800 - 1900 mm 105-417 1900 - 2000 mm 200 mm range models 105-418 1000 - 1200 mm 105-419 1200 - 1400 mm 105-420 1400 - 1600 mm 105-421 1600 - 1800 mm 105-422 1800 - 2000 mm Graduation 0.01 mm Extension Collars 1 pc (50 mm) Setting Standards Price 2 pcs £1890.00 £1920.00 £1960.00 £2020.00 £2060.00 £2350.00 £2500.00 £2700.00 £2990.00 £3250.00 £2090.00 £2600.00 £3130.00 £3570.00 £4110.00 0.01 mm 2 pcs (50 mm, 100 mm) 4 pcs Graduation Extension Collars Setting Standards .001" 1 pc (2") 2 pcs Inch Code No. 105-428 105-429 105-430 105-431 105-432 105-433 105-434 105-435 105-436 105-437 Range 40 - 44" 44 - 48" 48 - 52" 52 - 56" 56 - 60" 60 - 64" 64 - 68" 68 - 72" 72 - 76" 76 - 80" Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-26 Price £1890.00 £1920.00 £1960.00 £2020.00 £2060.00 £2350.00 £2500.00 £2700.00 £2990.00 £3250.00 B Micrometers SERIES 343 – Digimatic Caliper Anvil Micrometer Technical Data •Effective for measuring workpiece features where •Equipped with Ratchet Stop for constant access is difficult. measuring force. •Measuring faces: Carbide. Flatness: Parallelism*: Battery: 0.3 µm (.000012") (3+R/75) µm, [.00012+.00004(R/3)]" SR44 (2 pcs) 938882 * R = max. range (mm/inch) Note: Fractions rounded down Functions B 343-350 SPECIFICATIONS Inch/Metric Code No. 343-350 343-351 343-352 343-353 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Price £428.00 £514.00 £538.00 £570.00 Accuracy* ±5 µm (±.00025") ±6 µm (±.0003") ±7 µm (±.00035") ±8 µm (±.0004") 0.001 mm (.00005") * Excluding quantizing error. DIMENSIONS Unit: mm L ø4 5.9 11.3 47.2 2.3 3 41 11.5 17 a ø18 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-27 L 55.5 80.5 105.5 130.5 Optional Accessories 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: Thickness of jaw 3 ø13 25.7 7.4 3.4 12.5 b 14 ø6.35 c Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility where the instrument must be moved away from the workpiece before the reading can be recorded. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. a b c 27.5 10.6 32.9 SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 143 – Caliper Anvil Micrometer Technical Data Flatness: Parallelism*: 0.3 µm / .000012" (3+R/75) µm / [.00012+.00004(R/3)]" •Effective for measuring workpiece features where •Equipped with Ratchet Stop for constant access is difficult. measuring force. •Measuring faces: Carbide. * R = max. range (mm/inch) Note: Fractions rounded down B 143-101 SPECIFICATIONS Metric Code No. 143-101 143-102 143-103 143-104 143-105 143-106 143-107 143-108 143-109 143-110 143-111 143-112 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm Graduation Range 0 - 1" 1 - 2" 2 - 3" Graduation Price £212.00 £227.00 £231.00 £241.00 £281.00 £309.00 £329.00 £355.00 £366.00 £375.00 £415.00 £442.00 Accuracy ±5 µm ±6 µm ±7 µm ±8 µm ±9 µm 0.01 mm ±10 µm ±11 µm ±12 µm Inch Code No. 143-121 143-122 143-123 Price £212.00 £227.00 £231.00 Accuracy ±.00025" ±.0002" ±.00035" .001" DIMENSIONS Unit: mm C b 3 47 17 a Thickness of jaw 3 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm L 59.8 84.8 109.8 134.8 159.8 184.8 a 31.8 b 10.6 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. c ø18 ø13 5.9 ø8 12.5 25.7 ø4 7.4 3.4 L 14 Range 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm 28.6 B-28 L 209.8 234.8 255.8 280.8 305.8 330.8 a b c 31.8 10.6 28.6 27.8 14.5 32.5 Micrometers SERIES 116 – Interchangeable Anvil Universal Micrometer Technical Data Spindle feed error: 3 μm / .00015" Optional Accessories 3.5 116-802 ø6 SR4 0.4 45° ø3.5 ø11.1 116-806 0.1 116-805 ø0.3 ø4 116-804 B 55° 116-803 ø6 ø6 116-801 ø2 •Non-rotating spindle type which accepts seven forms of optional interchangeable anvils/spindle tips (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications. •Equipped with Ratchet Stop for constant measuring force. •Optional anvils/spindle tips for screw thread measurement (matching V and cone) are also available. 2 0.75 116-807 116-101 Interchangeable anvil/spindle tips (pair) Code No. 116-801 116-802 116-803 116-804 116-805 116-806 116-807 Description Flat Spline Spherical Point Knife-edge Disk Blade Price £45.20 £24.00 £24.00 £24.00 £24.00 £24.00 £45.20 Interchangeable anvil/spindle tips set Interchangeable contact points (optional) Code No. 116-800 Metric Range 0 - 25 mm 25 - 50 mm Graduation Accuracy 0.01 mm ±4 µm Range 0 - 1" 1 - 2" Graduation Accuracy .001" ±.0002" Price £221.00 £291.00 Inch Code No. 116-105 116-106 Price £314.00 Thread-measuring interchangeable contact points (pair) SPECIFICATIONS Code No. 116-101 116-102 Description Consists of 126-801 to 126-807 Price £221.00 £291.00 Note: 116-102 is provided with a plain setting standard (167-101) and a 60°-thread setting standard (167-261) for adjusting the minimum range point according to the application. B-29 Code No. 116-831 116-832 116-833 116-834 116-835 116-836 Metric 0.4 - 0.5 mm 0.6 - 0.9 mm 1 - 1.75 mm 2 - 3 mm 3.5 - 5 mm 5.5 - 7 mm UNF 64 - 48 TPI 44 - 28 TPI 24 - 14 TPI 13 - 9 TPI 8 - 5 TPI 4.5 - 3.5 TPI Price £36.00 £45.20 £45.20 £36.00 £36.00 £36.00 Thread-measuring interchangeable contact points set Code No. 116-830 Description Consists of 116-831 to 116-836 Price £270.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 125 – Screw Thread Micrometer Technical Data Accuracy*: Spindle feed error: ±(2+R/75) μm 3 μm •Fixed anvil type to suit 60º threads. •Directly indicates screw pitch diameter (no need for calculation). •Equipped with Ratchet Stop for constant measuring force. * R = max. range (mm/inch) Note: Fractions rounded up B 125-103 SPECIFICATIONS Metric Code No. 125-101 125-102 125-103 125-104 125-105 125-106 125-107 125-108 125-109 125-110 125-111 125-112 125-113 125-114 125-115 125-116 125-117 125-118 125-119 125-120 Thread to be measured (Metric/Unified) 0.4 - 0.5 mm / 64 - 48 TPI 0.6 - 0.9 mm / 44 - 28 TPI 1 - 1.75 mm / 24 - 14 TPI 2 - 3 mm / 13 - 9 TPI 3.5 - 5 mm / 8 - 5 TPI 0.4 - 0.5 mm / 64 - 48 TPI 0.6 - 0.9 mm / 44 - 28 TPI 1 - 1.75 mm / 24 - 14 TPI 2 - 3 mm / 13 - 9 TPI 3.5 - 5 mm / 8 - 5 TPI 0.6 - 0.9 mm / 44 - 28 TPI 1 - 1.75 mm / 24 - 14 TPI 2 - 3 mm / 13 - 9 TPI 3.5 - 5 mm / 8 - 5 TPI 5.5 - 7 mm / 4.5 - 3.5 TPI 0.6 - 0.9 mm / 44 - 28 TPI 1 - 1.75 mm / 24 - 14 TPI 2 - 3 mm / 13 - 9 TPI 3.5 - 5 mm / 8 - 5 TPI 5.5 - 7 mm / 4.5 - 3.5 TPI Range Price £138.00 £138.00 £138.00 £138.00 £138.00 £192.00 £192.00 £192.00 £192.00 £192.00 £220.00 £220.00 £220.00 £220.00 £220.00 £230.00 £230.00 £230.00 £230.00 £230.00 Graduation 0 - 25 mm 25 - 50 mm 0.01 mm 50 - 75 mm 75 - 100 mm Note: A setting standard is supplied with each model (except for 0 - 25 mm measuring range). The setting standard is for metric threads (unified) 60°. DIMENSIONS Unit: mm Models up to 50 mm measuring range 14.5 3 L 32.3 47 17 c ø6.35 4.9 ø18 18 Models from 50 to 100 mm measuring range L 14.5 3 47 17 32.3 ø6.35 4.7 0 L 37.2 62.2 87 112 c 25 32 49 63 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. c Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-30 ø18 5 45 Micrometers SERIES 326 – Digimatic Interchangeable Anvil Screw Thread Micrometer •Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads. •Direct reading of screw pitch diameter (no need for calculation). •Equipped with Ratchet Stop for constant measuring force. •Interchangeable anvils/spindle tips are optional. B • Dust-tight and water jet protected IP65 0021 60 6 000 326-351-10 Interchangeable anvils / spindle tips (optional) SPECIFICATIONS Inch/Metric Code No. 326-351-10 326-352-10 326-353-10 326-354-10 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Price £485.00 £496.00 £515.00 £537.00 Accuracy* 0.001 mm (.00005") ±4 µm (±.0002") ±5 µm (±.00025") * Excluding quantizing error. Note: A matching setting standard is supplied with each model (except for 0 - 25 mm measuring range). The setting standard is for metric threads (unified) 60°. DIMENSIONS Unit: mm 18 L 14.5 2 47.2 2.3 3 43 17 Spindle feed error: Battery: 3 μm (.00015") SR44 (2 pcs) 938882 Functions Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Hold: Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility where the instrument must be moved away from the workpiece before the reading can be recorded. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. Optional Accessories 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 For interchangeable anvil/spindle tips sets refer to page B-32 ø6.35 C ø18 ø9.7 27.5 Technical Data Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-31 L 39.5 64.5 90 115.6 c 25 32 45 65 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 126 – Interchangeable Anvil Screw Thread Micrometer Technical Data Spindle feed error: 3 μm / .00015" Interchangeable Anvils/Spindle Tips For Metric/Unified threads (pair) Code No. 126-801 126-802 126-803 126-804 126-805 126-806 Metric 0.4 - 0.5 mm 0.6 - 0.9 mm 1 - 1.75 mm 2 - 3 mm 3.5 - 5 mm 5.5 - 7 mm UNF 64 - 48 TPI 44 - 28 TPI 24 - 14 TPI 13 - 9 TPI 8 - 5 TPI 4.5 - 3.5 TPI •Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads. •Direct reading of screw pitch diameter (no need for calculation). •Equipped with Ratchet Stop for constant measuring force. •Interchangeable anvils/spindle tips are optional. Price £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 B 126-125 For Whitworth threads (pair) Code No. 126-811 126-812 126-813 126-814 126-815 126-816 126-817 126-818 126-819 126-820 UNF 60 - 48 TPI 48 - 40 TPI 40 - 32 TPI 32 - 24 TPI 24 - 18 TPI 18 - 14 TPI 14 - 10 TPI 10 - 7 TPI 7 - 4.5 TPI 4.5 - 3.5 TPI Price £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 £40.60 Description Consists of 126-801 to 126-806 Consists of 126-811 to 126-820 Price £270.00 £448.00 Sets Code No. 126-800 126-810 Interchangeable anvils / spindle tips (optional) SPECIFICATIONS Metric Code No. 126-125 126-126 126-127 126-128 126-129 126-130 126-131 126-132 126-133 126-134 126-135 126-136 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm Graduation Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" 4 - 5" 5 - 6" 6 - 7" Graduation Price £190.00 £239.00 £246.00 £254.00 £294.00 £351.00 £428.00 £496.00 £521.00 £523.00 £615.00 £628.00 Accuracy ±4 µm ±5 µm 0.01 mm ±6 µm ±7 µm Inch M1 (U1) Pitch (mm), Nominal designation of threads per inch M2 (U2) M3 (U3) M4 (U4) M5 (U5) M6 (U6) Whitworth (Unified) W1 W2 W3 W4 W5 W6 W7 W8 W9 W10 Half angle error ±30' ±30' ±20' ±20' ±15' ±15' ±10' ±10' ±10' ±10' Price £190.00 £239.00 £246.00 £254.00 £290.00 £360.00 £430.00 Accuracy ±.0002" .001" ±.00025" ±.0003" Note: A matching setting standard is supplied with each model (except for 0 - 25 mm measuring range). The setting standard is for metric threads (unified) 60°. DIMENSIONS Unit: mm 18 L 14.5 3 47 17 27.5 ø18 Metric (Unified) ø6.35 Type C Allowable error in the vee/cone angles Code No. 126-137 126-138 126-139 126-140 126-141 126-142 126-143 Range L 0 - 25 mm 39.5 25 - 50 mm 64.5 50 - 75 mm 90 75 - 100 mm 115.6 100 - 125 mm 140.6 125 - 150 mm 165.6 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-32 c 25 32 45 65 79 93 Range 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm L 190.5 215.5 240.5 265.5 290.5 315.5 c 105 120 130 147 165 171 Micrometers SERIES 313 – Three-Wire Units •Enables measurement of the pitch diameter of screw threads with a standard micrometer. •Can be used for measuring the effective diameter of threads. (See Quick Guide to Micrometers at the end of this section.) Technical Data Roundness: Cylindricity: Hardness: Accuracy: 0.5 μm or less 1 μm or less 63 to 66 HRC ±2 μm B 313-101 SPECIFICATIONS Code No. Three-Wire Unit set 313-101 Code No. No. of units in set Wire dia. range (mm) Support spindle dia. (mm) 18 0.170 - 3.200 ø6.35 Wire dia. (mm) Price £2450.00 Thread type Metric (mm) One pair, support spindle ø6.35 mm (ø.25") 952131 0.170 0.2, 0.25, 0.3 952132 0.195 0.35 952133 0.220 0.4 952134 0.250 0.45 952135 0.290 0.5 952136 0.335 0.6 952137 0.390 0.7 952138 0.455 0.75, 0.8 952139 0.530 0.9 952140 0.620 1.0 952141 0.725 1.25 952142 0.895 1.5 952143 1.100 1.75, 2.0 952144 1.350 2.5 952145 1.650 3.0 952146 2.050 3.5 952147 2.550 4, 4.5 952148 3.200 5, 5.5, 6 B-33 Unified (threads per inch) Whitworth (threads per inch) 80 72 64 56 48 44, 40 36 32 28 24 20 18, 16 14, 13, 12 11, 10 9, 8 7 6 5, 4.5 — — — 60 48 40 36 32 28, 26 24, 22 20, 19, 18 16 14, 12 11, 10 9, 8 7 6 5, 4.5 Price £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 £139.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 169 – Paper Thickness Micrometer •Ideal where a greater contact area is advantageous such as when measuring soft and thin workpieces such as paper, felt, rubber, cardboard, fabrics and similar materials. •Non-rotating spindle ensures no twisting action is applied to the material being measured. •Equipped with Ratchet Stop for constant measuring force (8 ± 0.8N). B 169-101 SPECIFICATIONS Metric Code No. 169-101 Range 0 - 25 mm Graduation 0.01 mm Accuracy ±4 µm Flatness 1 µm Parallelism 3 µm Price £170.00 Range 0 - 1" Graduation .001" Accuracy ±.0002" Flatness .00004" Parallelism .00012" Price £170.00 Inch Code No. 169-103 DIMENSIONS Unit: mm (inch) 37.5 31.3 14.5 3 47 15.5 17 ø8 13.5 6.2 0.4 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-34 No central recess ø14.3 (ø.44") 25 ø18 5 0 45 Micrometers SERIES 323 – Digimatic Disc Micrometer •Can be used for making root tangent measurements on spur gears and helical gears. (See Quick Guide to Micrometers at the end of this section.) •Equipped with Ratchet Stop for constant measuring force. •Supplied with a setting standard (except for 0 - 25 mm / 0 - 1" measuring range). Technical Data Flatness: Parallelism: Battery: 1 µm (.00004") for models up to 100 mm (4") 4 µm (.00016") for models up to 50 mm (2"), 6 µm (.00024") for models up to 100 mm SR44 (2 pcs) 938882 Optional Accessories B 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: • Dust-tight and water jet protected IP65 0021 60 6 000 323-350 SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Root tangent (En) SPECIFICATIONS Inch/Metric Code No. 323-350 323-351 323-352 323-353 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Accuracy* Anvil dia. Measurable module 20 mm (.787") 0.5 - 6 ± 4 µm (±.0002") 0.001 mm (.00005") ± 6 µm (±.0003") Price £362.00 £394.00 £441.00 £467.00 * Excluding quantizing error Root tangent dimension DIMENSIONS Unit: mm b a L 42.5 2.3 3 43 17 35.2 t 5 ød 0 ø18 C ø6.35 45 øe Central recess b a L 14.5 2 47.2 2.3 3 43 17 32 5 0 C ø18 ø6.35 45 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-35 L a b 39.7 4.5 9.2 65.6 5.4 11 90.7 12.2 5.5 112.5 13.5 c 25 31 50 60 d e t 20 8 0.7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 123 – Disc Micrometer Technical Data Flatness: Parallelism: 1 µm / .00004" for models up to 100 mm / 4", 1.6 µm / .000063" for models over 100 mm / 4" 4 µm / .00016" for models up to 50 mm / 2", 6 µm / .00024" for models up to 100 mm, (5+R/75) µm* for models over 100 mm, .00024" for models up to 4" •Can be used for making root tangent measurements on spur gears and helical gears. (See Quick Guide to Micrometers at the end of this section.) •Equipped with Ratchet Stop for constant measuring force. •Supplied with a setting standard (except for 0 - 25 mm / 0 - 1" measuring range). * R = max. range (mm) Note: Fractions rounded up B Root tangent (En) 123-101 Root tangent dimension SPECIFICATIONS Metric Code No. 123-101 123-102 123-103 123-104 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Graduation Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Graduation Accuracy Anvil dia. Measurable module ø20 mm 0.5 - 6 Anvil dia. Measurable module .787" 0.5 - 6 Price £166.00 £187.00 £204.00 £207.00 ±4 µm 0.01 mm ±6 µm Inch Code No. 123-125 123-126 123-127 123-128 Accuracy Price £166.00 £187.00 £204.00 £216.00 ±.0002" .001" ±.0003" DIMENSIONS Unit: mm Models up to 50 mm measuring range b L 14.5 3 47 17 31.5 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm ø18 c ø6.35 a L a 37.5 6 62.5 87 5.5 112 b c 25 32 49 63 14 11 d e t 20 8 0.7 Models with a measuring range over 50 mm b L a t 14.5 3 47 31.5 ød 5 0 c Central recess Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-36 ø18 øe ø6.35 45 17 Micrometers SERIES 324 – Digimatic Interchangeable Anvil Gear Tooth Micrometer •Intended for making over-pin diameter measurements on gears using precision ball anvils/spindle tips. (See Quick Guide to Micrometers at the end of this section.) •Interchangeable steel (or carbide) ball anvils/spindle tips for various gear modules (0.5 - 5.25) are optional. •Equipped with Ratchet Stop for constant measuring force. •Ball anvil / spindle tips: optional. B • Dust-tight and water jet protected IP65 0021 60 6 000 Technical Data Battery: SR44 (2 pcs) 938882 Optional Accessories 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 For interchangeable anvils/spindle tips sets refer to page B-38 324-351 SPECIFICATIONS Inch/Metric Code No. 324-351 324-352 324-353 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") Resolution Accuracy* 0.001 mm (.00005") ± 4 µm (±.0002") Price £500.00 £530.00 £560.00 * Excluding quantizing error DIMENSIONS Unit: mm Models up to 50 mm measuring range 18 L 14.5 2 47.2 2.3 3 43 17 27.5 a ø8 ø6.35 ø18 68.5 ø3.5 (For attaching interchangeable tip) Models with a measuring range 50 - 100 mm 18 L 14.5 2 47.2 2.3 3 43 17 27.5 a ø6.35 ø8 ø18 68.5 ø3.5 (For attaching interchangeable tip) Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-37 L 64.5 90 115.6 140.6 a 32 45 65.5 79 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 124 – Interchangeable Anvil Gear Tooth Micrometer Interchangeable anvils/spindle tips Code Diameter* No. (mm) 124-801 ø0.8 124-802 ø1.0 124-803 ø1.191 (3/64") 124-821 ø1.5 124-804 ø1.588 (1/16") 124-805 ø2.0 124-806 ø2.381 (3/32") 124-822 ø2.5 124-807 ø3.0 124-808 ø3.175 (1/8") 124-823 ø3.5 124-809 ø3.969 (5/32") 124-810 ø4.0 124-824 ø4.5 124-811 ø4.763 (3/16") 124-812 ø5.0 124-813 ø5.556 (7/32") 124-814 ø6.0 124-815 ø6.35 (1/4") 124-816 ø7.0 124-817 ø7.144 (9/32") 124-818 ø7.938 (5/16") 124-819 ø8.0 124-820 ø8.731 (11/32") Gear Dia. module pitch 0.5 - 0.55 50 0.6 - 0.65 45 0.7 - 0.8 35 - 30 0.9 - 1 28 - 26 0.9 - 1 28 - 26 1.25 22 1.5 17 1.5 17 1.75 15 — 14 2 13 2 13 2.25 11 2.5 10 2.5 10 2.75 9 3.0 - 3.25 8 3.5 7 3.75 7 4.0 6.5 4.25 6 4.5 5.5 4.75 5.5 0.5 - 5.25 5 * ø2 mm or less / carbide-tipped type. Price £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 £64.50 •Intended for making over-pin diameter measurements on gears using precision ball anvils/spindle tips. (See Quick Guide to Micrometers at the end of this section.) •Interchangeable steel (or carbide) ball anvils/spindle tips for various gear modules (0.5 - 5.25) are optional. •Equipped with Ratchet Stop for constant measuring force. •Ball anvil / spindle tips: optional. B 124-173 SPECIFICATIONS Metric Code No. 124-173 124-174 124-175 124-176 124-177 124-178 124-179 124-180 124-181 124-182 124-183 124-195 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm Graduation Accuracy Price £191.00 £202.00 £213.00 £230.00 £248.00 £275.00 £315.00 £327.00 £363.00 £411.00 £442.00 £474.00 ±4 µm ±5 µm 0.01 mm ±6 µm ±7 µm DIMENSIONS Unit: mm Models up to 50 mm measuring range L 18 14.5 3 17 47 a ø18 ø6.35 27.5 ø3.5 (For attaching interchangeable tip) Models with a measuring range 50 - 300 mm L 68.5 (83.5) 27.5 (35) 14.5 3 (28) 47 (50) a ø6.35 (ø8) ø18 (ø21) ø8 18 (28) ( ): Code No.124-195 ø3.5 (For attaching interchangeable tip) Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-38 17 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm L 64.5 90 115.6 140.6 165.6 190.5 215.5 240.5 265.5 290.5 315.5 353 a 32 45 65 79 93 105 120 130 147 165 171 187 Micrometers SERIES 369 – Digimatic Non-Rotating Spindle Disc Micrometer •Can be used for making root tangent measurements on spur gears and helical gears. (See Quick Guide to Micrometers at the end of this section.) •Measurable range of gear pitch: 0.5 to 6 module. • Equipped with Ratchet Stop for constant measuring force. • Supplied with a setting standard (except for 0 - 25 mm / 0 - 1" measuring range). B 369-350 Technical Data Battery: SR44 (2 pcs) 938882 Optional Accessories 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 SPECIFICATIONS Inch/Metric Code No. Range Digimatic type 369-350 0 - 25 mm (0 - 1") 369-351 25 - 50 mm (1 - 2") 369-352 50 - 75 mm (2 - 3") 369-353 75 - 100 mm (3 - 4") Resolution 0.001 mm (.00005") Accuracy* Anvil dia. Flatness ø20 1 µm (.00004") ±4 µm (±.0002") ±6 µm (±.0003") Parallelism Price 4 µm (.00016") £451.00 £602.00 £629.00 £650.00 ±6 µm (.00024") * Excluding quantizing error. DIMENSIONS Unit: mm Models up to 75 mm measuring range b L a C Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm L 58.5 83.5 108.5 112.5 a b 7 9.8 11.2 13.5 12.9 5.5 c 32 47 60 Model with 75 - 100 mm measuring range 14.5 6.5 L 47.2 2.3 3 41 11.5 17 0.7 ø20 ø18 32 ø6.35 ø8 No central recess c b a B-39 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 369 – Non-Rotating Spindle Disc Micrometer •Can be used for making root tangent measurements on spur gears and helical gears. (See Quick Guide to Micrometers at the end of this section.) •Measurable range of gear pitch: 0.5 to 6 module. • Equipped with Ratchet Stop for constant measuring force. • Supplied with a setting standard (except for 0 - 25 mm / 0 - 1" measuring range). B 169-203 SPECIFICATIONS Metric Code No. 169-201 169-202 169-205 169-207 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Graduation Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Graduation Accuracy Anvil dia. Flatness ø20 1 µm Price £180.00 £203.00 £220.00 £230.00 Parallelism ±4 µm 4 µm 0.01 mm ±6 µm 6 µm Inch Code No. 169-203 169-204 169-206 169-208 Accuracy Anvil dia. Flatness ø20 .00004" Price £180.00 £203.00 £220.00 £230.00 Parallelism ±.0002" .00016" .001" ±.0003" .00024" DIMENSIONS Unit: mm Models up to 50 mm measuring range 14.5 3 L b a 15.5 47 17 ø8 31.5 ø18 5 0 C 45 Models over 50 mm measuring range L 14.5 3 47 15.5 17 31.5 ø8 a 5 0 ø18 b C 45 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-40 L 37.5 62.5 87 112 a b 6 13.5 5.5 13 c 25 32 49 63 Micrometers SERIES 389 – Digimatic Sheet Metal Micrometer Technical Data •The large throat depth makes this micrometer •Equipped with Ratchet Stop for constant ideal for measuring the thickness of sheet metal measuring force. at a considerable distance from the edge. •Measuring faces: Carbide. •Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical. Flatness: Parallelism: Quantizing error: Battery: 0.6 μm (.000024") for models up to 150 mm (6") throat, 1.0 μm (.00004") for models with 300 mm (12") throat 3 μm (.00012") excluding ±1 count SR44 (1 pc), 938882 (2 pcs: 389-714) Optional Accessories B Standard, Flat-Flat (F-F) 389-351 Spherical-Flat (S-F) • Dust-tight and water jet protected IP65 0021 04AZB512: 04AZB513: 959149: 959150: 60 6 000 Spherical-Spherical (S-S) SPECIFICATIONS Inch/Metric Code No. Range 389-351 389-361 389-371 389-714 389-352 389-362 389-372 Accuracy* Throat depth*1 ±4 µm (±.0002") 150 mm (6") ±5 µm (±.00025") 300 mm (12") ±4 µm (±.0002") 150 mm (6") Resolution 0 - 25 mm (0 - 1") 0.001 mm (.00005") 25 - 50 mm (1 - 2") Data cables (excluding 389-714) 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Data cables for 389-714 Measuring surfaces F-F S-F S-S Price * May interfere with operating the thimble. £397.00 £408.00 £408.00 £785.00 £406.00 £444.00 £454.00 F-F S-F S-S L-type SPC data cable (1 m) £65.00 L-type SPC data cable (2 m) £68.00 SPC data cable with pushbutton* (1 m) £34.60 SPC data cable with pushbutton* (2 m) £39.40 L-type * Excluding quantizing error. *1Models with a 300 mm (12") throat are equipped with a stand for convenience of measurement in the horizontal orientation. Straight type DIMENSIONS Unit: mm 2.3 3 389-714 only: 43 17 L 78 38.5 28 2 55.3 3 50 17 3.5 35 ø6.35 L 30.3 55.3 a 160 165 b 48 45 c 2.8 2.5 ø21 47.2 ø18 b 2 ø9.7 14.5 c Range 0 - 25 mm 25 - 50 mm ø8 Stand 330° 330 a C0.2 Both Spindle / Anvil B-41 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 389 – Sheet Metal Micrometer Technical Data Flatness: Parallelism: 0.6 μm / .000024" for models up to 150 mm / 6" throat, 1.0 μm / .00004" for models with 300 mm / 12" throat 3 μm / .00012" •The large throat depth makes this micrometer ideal for measuring the thickness of sheet metal at a considerable distance from the edge. •Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical. •Equipped with Ratchet Stop for constant measuring force. •Measuring faces: Carbide. Standard, Flat-Flat (F-F) 118-102 B Spherical-Flat (S-F) Spherical-Spherical (S-S) SPECIFICATIONS Metric Code No. 118-101 118-102 118-114 118-118 118-103 118-110 118-126 Range Graduation Accuracy Measuring surfaces Throat depth* 100 mm ±4 µm 0 - 25 mm 150 mm 25 - 50 mm 300 mm ±4 µm 150 mm Accuracy Throat depth* £125.00 £133.00 £151.00 £170.00 £219.00 £170.00 £182.00 F-F S-F S-S 0.01 mm ±5 µm Price F-F S-S Inch Code No. Range 118-129 118-116 118-120 118-107 118-112 Graduation 0 - 1" 1 - 2" .0001" ±.0002" 6" .001" ±.00025" ±.0002" 12" 6" Measuring surfaces F-F S-F S-S Price £133.00 £152.00 £170.00 £219.00 £170.00 F-F * Models with a 300 mm (12") throat are equipped with a stand for convenience of measurement in the horizontal orientation. DIMENSIONS Unit: mm g f a øe ød c L b Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Code No. 181-101 181-102 181-114 181-118 181-103 181-110 B-42 L 30.3 a 110 160 b c d e f 27.5 2.8 18 6.35 14.5 g 39 48 38.5 330 35 3.5 21 8 28 84 55.3 165 27.5 2.5 18 6.35 14.5 45 Micrometers SERIES 395,115 – Tube Micrometers Technical Data •Measuring faces: Carbide (115-101: only the spindle is carbide tipped). •395 series: IP65 digital spherical-flat anvil type micrometer. •Equipped with Ratchet Stop for constant measuring force. Flatness: Battery: 0.6 μm / .000024":115 series 0.3 μm (.000012"): 395 series SR44 (1 pc), 938882: 395 series Optional Accessories Data cables for 395 series 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 • Dust-tight and water jet02AZD790B: protected IP65 SPC data cable for U-WAVE-T (160 mm) £52.20 0 000 6 02AZE140B: SPC data cable for U-WAVE-T and footswitch 1 002 (160/500 mm) £119.00 B 6 395-351 115-115 SPECIFICATIONS Inch/Metric Code No. Digimatic 395-351 395-352 395-353 395-354 Range Resolution 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Accuracy* 0.001 mm (.00005") Price øD £340.00 £370.00 £410.00 £395.00 ø15 mm (ø.59") ±2 µm (±.0001") ø19 mm (ø.75") ±3 µm (±.00015") Metric Code No. 115-101 115-115 115-116 115-117 115-118 Range 0 - 15 mm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Graduation Range 0 - 1" Graduation .0001" ±4 µm øD ø5.5 mm ø10 mm ø11 mm ø17 mm ø18 mm Price £99.00 £79.20 £80.70 £82.50 £97.50 Accuracy ±.00015" øD ø.40" Price £79.20 Accuracy ±3 µm 0.01 mm Inch Code No. 115-153 * Excluding quantizing error. DIMENSIONS øD 115-101: 3.5 Unit: mm 1.2 19 14.5 3 17 37 17.8 ø9.7 SR4 0 1.2 ø15 5 ø6.35 ø3 19 45 SR2 15.5 5 Unit: mm B-43 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 395,115 – Spherical Anvil and Spindle Tube Micrometers Technical Data Battery: SR44 (1 pc), 938882: 395 series •Measuring faces: Carbide (115-201: only the spindle is carbide tipped). •395 series: Digimatic type IP65 rated with spherical anvil and spindle. •Equipped with Ratchet Stop for constant measuring force. Optional Accessories Data cables for 395 series 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 B 395-371 • Dust-tig jet prot 0 115-215 SPECIFICATIONS Inch/Metric Code No. Digimatic 395-371 395-372 395-373 395-374 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution 0.001 mm (.00005") Accuracy* Price øD ø19 mm (ø.75") ø20 mm (ø.79") £340.00 £370.00 £410.00 £430.00 øD ø5.5 mm ø10 mm ø11 mm ø17 mm ø18 mm Price £102.00 £84.50 £86.10 £95.70 £105.00 øD ø.40" ø.44" ø.67" Price £84.50 £86.10 £95.70 ø15 mm (ø.59") ±2 µm (±.0001") ±3 µm (±.00015") Metric Code No. 115-201 115-215 115-216 115-217 115-218 Range 0 - 15 mm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Graduation Range 0 - 1" 1 - 2" 2 - 3" Graduation .0001" Accuracy ±3 µm 0.01 mm ±4 µm Inch Code No. 115-253 115-242 115-243 Accuracy ±.00015" .001" * Excluding quantizing error. DIMENSIONS Unit: mm 115-201: 5 øD (94) 3.5 1.2 SR4 19 17.8 14.5 3 37 17 ø9.7 SR4 ø15 5 0 Unit: mm ø1 SR4 4 SR1 Details of the measuring unit Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. (42.5) ø6.35 1.2 15.5 19.5 45 B-44 4 Micrometers SERIES 395,115 – Cylindrical/Spherical Anvil Tube Micrometers Technical Data •Spindle face: Carbide. •395 series: Digimatic type IP65 rated with spherical and cylindrical anvils. •Equipped with Ratchet Stop for constant measuring force. Battery: SR44 (1 pc), 938882: 395 series Optional Accessories Data cables for 395 series 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 • Dust-tight and water 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) jet protected IP65 £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) 0 000 6 0021 £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 B 6 395-363 115-315 SPECIFICATIONS Type A (pin) Type B (spherical) Type C (cylindrical) Type D (cylindrical) Inch/Metric Code No. Digimatic 395-362 395-363 395-364 Price Range Resolution Accuracy* Remarks 0 - 25 mm (0 - 1") 0.001 mm (.00005") ±3 µm (±.00015") Type B Type C Type D £331.00 £305.00 £380.00 Remarks Type A Type B Type A Type C Type D Price £82.10 £95.70 £89.10 £94.10 £94.10 Remarks Type A Type C Type D Price £82.10 £94.10 £94.10 Metric Code No. 115-302 115-308 115-303 115-315 115-316 Range Graduation Accuracy 0.01 mm ±3 µm Graduation .001" Accuracy 0 - 25 mm 25 - 50 mm 0 - 25 mm Inch Code No. 115-305 115-313 115-314 Range 0 - 1" ±.00015" .0001" * Excluding quantizing error. DIMENSIONS Unit: mm 6 Type A (pin) Type B (spherical) ø8 9 L Sø4.7 12.7 ø3.5 8 ø1.8 1.4 øD ø4 ø6.9 ø6.9 D: Minimum measurable inside diameter L : Distance to spindle centre Type C (cylindrical) Type D (cylindrical) B-45 Anvil Type A Type B Type C Type D D 2 3.6 4.8 8.2 L 4 4 12 22 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 331 – Digimatic Spline Micrometer Technical Data Flatness: Parallelism*: Battery: •The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways. •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. 0.3 μm (.000012") (2+R/100) μm, [.00008+.00004(R/4)]" SR44 (1 pc), 938882 Note: Fractions rounded down * R = max. range (mm/inch) Optional Accessories SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 B • Dust-tight and water jet protected IP65 000 0021 60 6 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: 331-351 SPECIFICATIONS Inch/Metric Code No. 331-351 331-352 331-353 331-354 331-361 331-362 331-363 331-364 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Accuracy* ±2 µm (±.0001") 0.001 mm (.00005") Price £341.00 £385.00 £394.00 £450.00 £430.00 £480.00 £510.00 £530.00 Remarks Type A ±3 µm (±.00015") ±2 µm (±.0001") 0.001 mm (.00005") Type B ±3 µm (±.00015") * Excluding quantizing error. DIMENSIONS Unit: mm 3 43 17 43 5 0 5 0 45 C 45 Type AA ø3 ø3 mm mm Type 17 Type BB ø2 ø2 mm mm Type 10 10 10 10 55 55 ø2 2.3 3 ø3 ø6.35 42.5 2.3 42.5 ø18 40.7 40.7 ø18 L ø6.35 a a ø9.7 L b b ø9.7 Models up to 75 mm measuring range Unit: mm mm Unit: C Unit: mm mm Unit: Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 2.3 3 14.5 2 47.2 2.3 3 43 47.2 37.5 14.5 2 132.8 132.8 ø6.35 37.5 47 17 17 B-46 17.5 17 17 ø18 ø18 76 76 b of the latest technological L Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit advances.14.5 3 b without notice. L 47 Therefore the company reserves the right to change any or all aspects of any product specification 37.514.5 3 a a 43 37.5 20.3 ø6.35 20.3 a ø9.7 16.7 16.7 ø9.7 Model with 75 - 100 mm measuring range L 58.2 83.2 108.2 b 7.3 10.1 11.5 c 32 47 60 Micrometers SERIES 111 – Spline Micrometer Technical Data •The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways. •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. Flatness: Parallelism*: 0.3 μm / .000012" (2+R/100) μm, [.00008+.00004(R/4)]" Note: Fractions rounded down * R = max. range (mm/inch) B L b a 42.5 2.3 3 17 43 40.7 ø6.35 ø9.7 111-115 0 C ø18 5 45 SPECIFICATIONS Range 0 - 25 mm 0 - 25 mm 25 - 50 mm 132.8 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 270 - 300 mm Graduation Accuracy Price £130.00 £123.00 £143.00 £160.00 £171.00 £251.00 £262.00 £292.00 £312.00 £340.00 £370.00 £410.00 £440.00 Remarks Type B ±3 µm 14.5 2 47.2 2.3 3 43 17 ø9.7 37.5 ø18 ±4 µm 0.01 mm Type A ø6.35 Code No. 111-215 111-115 111-116 16.7 111-117 20.3 111-118 111-119 111-120 111-121 111-122 111-123 111-124 111-125 111-126 ±5 µm ±6 µm Inch Code No. 111-166 Range 0 - 1" Graduation .0001" Accuracy ±.00015" Price £123.00 Remarks Type A DIMENSIONS Unit: mm Models up to 200 mm measuring range 14.5 3 47 37.5 Type AA ø3 ø3 mm mm Type Type BB ø2 ø2 mm mm Type 10 10 10 10 55 55 ø6.35 ø18 a 17 ø2 L ø3 b c 76 Metric Unit: mm mm Unit: Unit: mm mm Unit: Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm B-47 L 55 80 105 132.8 158.2 183.6 208.8 234.2 a 17.5 20.3 20.7 21.1 21.3 21.7 b 10 12 14 17 19 20 19 18 c 38 49 60 79 94 106 118 130 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 342 – Digimatic Point Micrometer Technical Data SR44 (1 pc), 938882 Optional Accessories 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 B • Dust-tight and water jet protected IP65 000 0021 60 6 Battery: •Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach features. •The measuring points (carbide tipped) have approximately 0.3 mm radius. •Equipped with Ratchet Stop for constant measuring force. 342-351 SPECIFICATIONS Inch/Metric Code No. 342-351 342-352 342-353 342-354 342-361 342-362 342-363 342-364 Tip angle: 15º Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") Resolution Accuracy* Price £319.00 £357.00 £382.00 £512.00 £319.00 £357.00 £382.00 £512.00 Point ±2 µm (±.0001") 15º ±3 µm (±.00015") 0.001 mm (.00005") ±2 µm (±.0001") 30º ±3 µm (±.00015") * Excluding quantizing error. Tip angle: 30º DIMENSIONS Unit: mm Models up to 75 mm measuring range b L 2.3 3 42.5 43 17 c 7 c ø18 ø6.35 ø9.7 45.7 a 30° type (70.3) 15° type 10 10 30° 15° (SR0.3) (25) (SR0.3) (11.2) (25) Model with 75 - 100 mm measuring range L b (25) 14.5 2 47.2 2.3 3 43 17 42.5 c ø6.35 ø18 ø9.7 a Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-48 L 58.2 83.2 108.2 132.8 a 12.5 15.3 b 7.3 10.1 11.5 16.7 c 32 47 60 76 Micrometers SERIES 112 – Point Micrometer •Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach features. •The measuring points (carbide tipped) have approximately 0.3 mm radius. •Equipped with Ratchet Stop for constant measuring force. Tip angle: 15º Tip angle: 30º B 112-225 SPECIFICATIONS Metric Code No. 112-153 112-154 112-155 112-156 112-201 112-202 112-203 112-204 With carbide tip 112-165 112-166 112-167 112-168 112-213 112-214 112-215 112-216 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Graduation Accuracy Price £81.00 £128.00 £180.00 £220.00 £94.60 £147.00 £180.00 £220.00 Point ±3 µm 15º ±4 µm 0.01 mm ±3 µm 30º ±4 µm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm ±3 µm £181.00 £207.00 £250.00 £290.00 £156.00 £180.00 £190.00 £240.00 15º ±4 µm 0.01 mm ±3 µm 30º ±4 µm Inch Code No. 112-177 112-178 112-225 112-226 With carbide tip 112-189 112-190 112-191 112-237 112-238 Range 0 - 1" 1 - 2" 0 - 1" 1 - 2" Graduation Accuracy .001" ±.00015" Price £81.00 £128.00 £94.60 £147.00 Point 15º 30º 0 - 1" 1 - 2" 2 - 3" 0 - 1" 1 - 2" £195.00 £207.00 £250.00 £156.00 £180.00 15º .001" ±.00015" 30º DIMENSIONS Unit: mm b L a 14.5 3 47 17 42.5 15° type 10 10 30° type 30° (SR0.3) c ø18 ø6.35 15° Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm B-49 L 55 80 105 132.8 (SR0.3) a 12.5 15.3 b 10 12 14 17 c 38 49 60 79 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 314 – Digimatic V-Anvil Micrometer Technical Data Battery: SR44 (1 pc), 938882 Optional Accessories 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 •Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three flutes. •Can measure pitch diameter of screw threads. (See Quick Guide to Micrometers at the end of this section.) •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. B 314-351-10 SPECIFICATIONS Inch/Metric Code No. Range For 3-flute cutting tools 314-351-10 1 - 15 mm (.05 - .6") 314-352-10 10 - 25 mm (.4 - 1") 314-353-10 25 - 40 mm (1 - 16") 314-361-10 1 - 15 mm (.05 - .6") 314-362-10 10 - 25 mm (.4 - 1") Resolution 0.001 mm (.00005") Accuracy* Remarks ±4 µm (±.0002") Grooved ±5 µm (±.00025") — — — ±4 µm (±.0002") Anvil Price 60º £537.00 £598.00 £640.00 £537.00 £598.00 * Excluding quantizing error. DIMENSIONS Unit: mm 17 Grooveless model 8 60° Tap Pitch Diameter Measurement of Tap by Single-wire Method 43 ø18 (14.5) 3 ø1.5 44.8 7) (14. 8 Wire Spindle 0.5 Anvil ø1.5 314-351-10: Grooved model 30.3 60° (a) 18 Range 10 - 25 mm 25 - 40 mm (a) 6.2 19.14 60° ø6.35 (14.5) 0.5 314-353-10: 7) (14. 114-101 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-50 Micrometers SERIES 114 – 3-Flute V-Anvil Micrometer •Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three flutes. •Can measure pitch diameter of screw threads. (See Quick Guide to Micrometers at the end of this section.) •Equipped with Ratchet Stop for constant measuring force. Anvil Wire Spindle Tap Pitch Diameter Measurement of Tap by Single-wire Method B 114-101 114-102 SPECIFICATIONS Metric Code No. 114-204 114-101 114-102 114-103 114-104 114-105 114-106 114-161 114-162 Range 2.3 - 25 mm 1 - 15 mm 10 - 25 mm 25 - 40 mm 40 - 55 mm 55 - 70 mm 70 - 85 mm 1 - 15 mm 10 - 25 mm Graduation Range .05 - 6" 1 - 1.6" Graduation 0.01 mm Accuracy ±4 µm Remarks — ±4 µm Grooved ±5 µm — — — — — — ±6 µm ±7 µm ±4 µm Anvil 60º Carbide tip Anvil and spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle Price £253.00 £269.00 £276.00 £317.00 £356.00 £362.00 £419.00 £269.00 £313.00 Carbide tip Spindle Spindle Price £269.00 £317.00 Inch Code No. 114-163 114-113 Accuracy ±.0002" ±.00025" .0001" Remarks — — Anvil 60º DIMENSIONS Unit: mm 114-103: 47 Grooveless model 7 22. ø6.35 30.3 (23.46) 7) (14. 60° (14.5) 0.5 ø1.5ø1.5 114-204: 114-101: 114-103 8 8 ø1.5 ø18 8 60° (a) 8 18 Range (a) For 3-flute cutting tools 10 - 25 mm 6.2 25 - 40 mm 19.14 40 - 55 mm 32.13 55 - 70 mm 45.12 70 - 85 mm 58.11 17 ø1.5 14.5 3 ø6.35 27.5 60° ø1.5ø1.5 B-51 (23.46) (23.46) (14.5)(14.5) 114-101 60° 60° 30.3 7) 30.3 (14. 7) (14. ø6.35 ø6.35 7 22. 7 . 2 2 ° 60° 0.5 0.5 8 8 Grooved model 114-204 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 114 – 5-Flute V-Anvil Micrometer Anvil Wire Spindle •Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have five flutes. •Can measure pitch diameter of screw threads. (See Quick Guide to Micrometers at the end of this section.) •Equipped with Ratchet Stop for constant measuring force. Tap Pitch Diameter Measurement of Tap by Single-wire Method B 114-121 SPECIFICATIONS Metric Code No. 114-137 114-121 114-122 114-123 114-124 114-165 Range 2.3 - 25 mm 5 - 25 mm 25 - 45 mm 45 - 65 mm 65 - 85 mm 5 - 25 mm Graduation Range .09 - 1" Graduation .0001" 0.01 mm Accuracy ±4 µm ±4 µm ±5 µm ±6 µm ±7 µm ±4 µm Remarks — w/groove — — — — Anvil Accuracy ±.0002" Remarks — Anvil 108º 108º Carbide tip Anvil and spindle Spindle Spindle Spindle Spindle Spindle Price £317.00 £291.00 £375.00 £415.00 £519.00 £278.00 Carbide tip Spindle Price £291.00 Inch Code No. 114-135 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-52 Micrometers SERIES 422 – Digimatic Blade Micrometer •The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features. •Carbide-tipped measuring faces are available. •Equipped with Ratchet Stop for constant measuring force. Technical Data Parallelism: Battery: 3 µm (.0012") for models up to 75 mm (3"), 3+R/100) µm* for models over 75 mm (3") SR44 (1 pc) 938882 * R = max. range (mm/inch) Note: Fractions rounded up Optional Accessories B 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: • Dust-tight and water jet protected IP65 0021 60 6 000 422-330 SPECIFICATIONS SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Types Inch/Metric 0 - 25 mm (0 - 1") Type B Type C Type D ±3 µm (±.00015") Type C (carbide-tipped) Unit: mm 7 11 14.5 6.5 41 ø6 4 8 11.5 17 6 47.2 2.3 3 0.75 Type D (carbide-tipped) 60° 60° Model with 75 - 100 mm measuring range b L a 41.8 13.5 0.4 3 6.5 0.75 DIMENSIONS R8 6.5 ø6 * Excluding quantizing error. R8 6 ±4 µm (±.0002") Unit: mm Type B 0.4 Type A Type A 6 ±3 µm (±.00015") 0.001 mm (.00005") Price £590.00 £630.00 £660.00 £680.00 £660.00 £684.00 £699.00 Remarks ø6 Accuracy* 0.75 Resolution 6 Range 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 50 - 75 mm (2 - 3") 75 - 100 mm (3 - 4") ø6 Code No. 422-330 422-331 422-332 422-333 422-360 422-370 422-371 5 0 ø18 ø6.35 c ø6 45 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm L 65.6 90.7 105.3 132.8 a 12.5 12.6 13.5 16 b 11 12.2 14.1 16.7 c 31 50 57 76 Models up to 75 mm measuring range b L a 42.5 2.3 3 11.5 17 ø18 ø6.35 ø6 ø14 14.2 13.5 C 41 53.1 B-53 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 122 – Blade Micrometer Technical Data Parallelism: 3 µm / .0012" for models up to 75 mm / 3", 3+R/100) µm* for models over 75 mm / 3"), .00016" for 4" models •The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features. •Carbide-tipped measuring faces are also available. •Equipped with Ratchet Stop for constant measuring force. * R = max. range (mm/inch) Note: Fractions rounded up Types 122-101 0.4 R8 0.75 ø6 0.75 R8 B Unit: mm Type B ø6 Type A 3 6.5 6.5 Type D (carbide-tipped) 0.4 ø6 60° 4 7 8 6 11 6 60° 0.75 ø6 Type C (carbide-tipped) 6 6 SPECIFICATIONS Metric Code No. 122-101 122-102 122-103 122-104 122-105 122-106 122-107 122-108 122-109 122-110 122-115 122-116 122-111 122-112 With carbide tip 122-161 122-162 122-141 122-142 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm 0 - 25 mm 25 - 50 mm Graduation Accuracy Price £159.00 £168.00 £196.00 £211.00 £253.00 £270.00 £291.00 £315.00 £404.00 £430.00 £507.00 £540.00 £171.00 £174.00 Remark ±3 µm ±4 µm Type A 0.01 mm ±5 µm ±6 µm ±3 µm 0 - 25 mm 25 - 50 mm 0 - 25 mm 25 - 50 mm Type B £202.00 £240.00 £202.00 £240.00 Type C 0.01 mm ±3 µm Type D Inch Code No. 122-125 122-126 122-127 122-128 122-135 122-151 Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Graduation Accuracy ±.00015" .0001" Price £159.00 £168.00 £196.00 £211.00 £171.00 £202.00 Remark Type A ±.0002" 0 - 1" Type B Type D ±.00015" DIMENSIONS 17.5 17.9 18.3 18.5 18.9 17.7 18 18.7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. c 30 49 60 79 94 106 118 130 143 156 169 181 Unit: mm b L 14.5 3 a 47 40.3 ø18 15 b 8 12 13 17 19 20 19 ø6 a B-54 ø8 L 55.3 80.3 105.3 132.8 158.2 183.6 208.8 234.2 258 284 309 334 c Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 100 - 125 mm 125 - 150 mm 150 - 175 mm 175 - 200 mm 200 - 225 mm 225 - 250 mm 250 - 275 mm 275 - 300 mm 15.5 17 Micrometers SERIES 147 – Can Seam Micrometers •Measures the width, height, and depth of can seams. B 147-103 SPECIFICATIONS 147-103 147-104 Metric Code No. 147-103 147-105 147-202 Range Graduation Accuracy 0 - 13 mm 0.01 mm ±3 µm Range Graduation Accuracy 0 - .5" .001" ±.00015" Remark for steel cans for aluminium cans for spray cans Price £102.00 £106.00 £97.50 Remark for steel cans for aluminium cans for spray cans Price £102.00 £106.00 £97.50 for steel cans (for depth measurements up to 5 mm) Inch Code No. 147-104 147-106 147-201 DIMENSIONS for aluminium cans for spray cans Unit: mm B-55 147-105 147-106 147-202 147-201 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 147 – Hub Micrometer Technical Data Flatness: Parallelism: 0.6 μm / .000024" (2+R/100) μm, [.00008+.00004(R/4)]" •Measures hub thickness and shoulders inside a bore. •Measuring faces: Carbide. •Equipped with Ratchet Stop for constant measuring force. * R = max. range (mm/inch) Note: Fractions rounded up B 147-301 SPECIFICATIONS Metric Inch Code No. Range Graduation Accuracy 147-301 0 - 25 mm 147-302 25 - 50 mm ±2 µm 0.01 mm 147-303 50 - 75 mm 147-304 75 - 100 mm ±3 µm Price £140.00 £160.00 £190.00 £220.00 Code No. 147-351 147-352 147-353 147-354 Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Graduation Accuracy .001" ±.0001" ±.00015" Price £140.00 £160.00 £190.00 £220.00 DIMENSIONS Unit: mm h3 h2 H h1 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Technical Data Flatness: Parallelism: 0.6 μm / .000024" 1.3 μm / .00005" L 6 a 8.5 6.5 11 b 13.5 14 13 c 17.5 20.5 SERIES 147 – Wire Micrometer •Equipped with Ratchet Stop for constant measuring force. •Designed for measuring wire thickness. •Measurable wire dia.: 10 mm or less •Measuring faces: Carbide 147-401 SPECIFICATIONS Metric Code No. 147-401 Inch Range Graduation Accuracy 0 - 10 mm 0.01 mm ±3 µm Price £143.00 Code No. 147-402 Range 0 - 4" Graduation Accuracy .0001" ±.00015" Price £143.00 DIMENSIONS Unit: mm 101 15 12.5 14.5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-56 ø15 ø6.35 ø16 2 14.5 2.5 Micrometers SERIES 342, 112 – Crimp Height Micrometers Technical Data •Measures the height of crimp contacts. •Equipped with Ratchet Stop for constant measuring force. •342 series: Digimatic type IP65 rated. Battery: SR44 (1 pc), 938882: 342 series Optional Accessories Data cables for 342 series 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) • Dust-tight and water £106.00 jet protected IP65 02AZD790B: SPC data cable for U-WAVE-T (160 mm) 0 0 0 0 0 2 1 6 0 £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 6 B 342-371 112-401 SPECIFICATIONS Inch/Metric Code No. 342-371 Range 0 - 20 mm (0 - .8") Resolution 0.001 mm (.00005") Accuracy* ±3 µm (±.00015") Price £394.00 Range 0 - 25 mm Graduation 0.01 mm Accuracy ±3 µm Price £146.00 Metric Code No. 112-401 * Excluding quantizing error. DIMENSIONS Unit: mm A 33.2 42.5 2.3 3 43 17 ø9.7 5 .5 0 C0 ø6.35 30.7 ø18 6.5 2.5 25 2- 45 ø0.5 2.8 0.5 60° View on arrow 'A' B-57 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 317, 117 – Uni-Mike Interchangeable Anvil Micrometers Technical Data Flatness Spindle face: Anvil face: Parallelism: Battery: 0.6 μm 2 μm 3 μm SR44 (1 pc), 938882: 317 series •Measures tubing thickness, shoulder-edge distance, rivet head height, etc., with interchangeable anvils (flat anvil, rod anvil, V-anvil). •IP65 water/dust protection (317 series). Optional Accessories Rod anvil (Standard accessory) 120° • Dust-tigh jet prote 25 ø3 (for 25mm) ø5 (for 50mm) B Unit: mm R3.2 1.5 6.35 V-anvil (optional) 00 317-351 Flat anvil (Standard accessory) 201216: Flat anvil (standard accessory) £13.70 201217: Rod anvil (standard accessory for 117-101) £1.10 201379: Rod anvil (standard accessory for 117-102) £1.20 201218: V-anvil £9.10 950758: Base for 25 mm £53.50 Data cables for 317 series 05CZA662: SPC data cable with pushbutton (1 m) £58.50 05CZA663: SPC data cable with pushbutton (2 m) £70.40 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m) £106.00 02AZD790B: SPC data cable for U-WAVE-T (160 mm) £52.20 02AZE140B: SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 117-101 SPECIFICATIONS Inch/Metric Code No. Digimatic 317-351 317-352 Price Range Resolution Accuracy* 0 - 25 mm (0 - 1") 25 - 50 mm (1 - 2") 0.001 mm (.00005") ±4 µm (±.0002") Range Graduation Accuracy 0 - 25 mm 25 - 50 mm 0.01 mm ±4 µm Range Graduation Accuracy Price 0 - 1" 1 - 2" .0001" ±.0002" £109.00 £154.00 £316.00 £428.00 Metric Code No. Analogue 117-101 117-102 Price £109.00 £154.00 Inch Code No. Analogue 117-107 117-108 * Excluding quantizing error. DIMENSIONS Unit: mm 52.5 (27.5) 25 7 34 26.5 33.6 27.5 ø6.35 25 (0) ø18 1.5 117-102 ( ): for 0-25 mm measuring range models 8.5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-58 Micrometers SERIES 510 – Indicating Micrometer B •Suited to the measurement of low-volume manufactured parts. •Easy to use when operating one-handed due to retractable anvil. •In the 25 mm measuring range, models are available that offer left or right positioning of the anvil-retraction button. •Water resistant to protection level IP54. •Greatly improved accuracy: indication error and graduation of 1 μm. •Hard-coated crystal: enhanced oil and scratch resistance. •Indicator scale is large and easy-to-read. •Easily set zero position and adjustable limit markers for GO/±NG testing. •Measuring faces: Carbide. Technical Data Flatness: Parallelism: Accuracy: Spindle feed error: Dispersion of indication: Dial indication accuracy: 0.3 μm / .000012" 0.6 μm / .000024" for models up to 50 mm / 2", 1 μm / .00004" for models over 50 mm / 2" ±2 μm 3 μm / .00015" 0.4 μm / .00002" 1 μm / .00005" 510-121 510-122 SPECIFICATIONS Metric Code No. 510-121 510-122 510-123 510-124 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Indicating range Graduation Dial graduation Measuring force ±0.06 mm 0.001 mm 0.001 mm 5 - 10N Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Indicating range Graduation Dial graduation Measuring force ±.0023" .0001" .00005" 5 - 10N Price £524.00 £588.00 £681.00 £753.00 Inch Code No. 510-131 510-132 510-133 510-134 B-59 Price £524.00 £588.00 £681.00 £753.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Workpiece stop (optional) 19 3 5 0 Workpiece stop (optional) 20 Enables a more stable measurement. Three types are available to suit workpieces of different sizes. 45 10 D DIMENSIONS 3.5 50 ø8 L ø21 11.5 55.5 10 30 30 40 Unit: mm 40 50 50 anvilside) button Up to 25 mm measuring range (anvil-retraction buttonRetractable on the right 60 60 0.001 mm 000000 £9.90 ø14 20.5 £9.90 ø14 15 £9.90 20 10 11.5 55.5 10 30 5 0 30 in Dm 20 10 10 60 0.001 mm 000000 40 50 C Retractable anvil button 30 40 Heat shield Thickness: t 50 60 B 45 50 60 ax L 40 50 Dm 5 Workpiece0 stop (optional) 3.5 19 3 45 50 30 40 A Workpiece stop (optional) Heat shield t 3.5 50 L Thickness: 19 3 11.5 55.5 ø21 23 ø21 ø16 ø8 Price D B ø8 A D Code No. Workpiece stop A 04AZA124 Workpiece stop B 04AZA125 Workpiece stop C 04AZA126 60 0.001 mm B 000000 Workpiece stop (optional) Heat shield 60 30 60 0.001 mm 30 000000 40 C 15.5 mm 18.0 mm 23.5 mm ø21 Workpiece stop (optional) 40 50 50 Heat shield Thickness: t 60 60 Retractable anvil button 0.001 mm 000000 L 11.5 55.5 Range 10 10 30 30 40 19 3 50 31.5 ø8 Retractable anvil button Dmax 37 mm 42 mm 50 mm 5 0 10 50 10 50 3.5 50 45 40 D Code No. 510-122 and 510-132 Dmin Workpiece stop A 25 mm Workpiece stop B 30 mm Workpiece stop C 41 mm 19 3 30 40 Code No. 510-121, 510-141, 510-131, 510-151 Dmin Dmax C Workpiece stop A N/A N/A N/A Workpiece stop B 4 mm 16 mm 5.0 mm Workpiece stop C 15 mm 25 mm 10.5 mm 0 45 ø21 10 30 31.5 ø8 10 L Range 3.5 50 5 Heat shield Thickness: t 5 0 ø21 20 ø8 11.5 55.5 19 3 L D 6 Dmin: Minimum measurable diameter Dmax:Maximum measurable diameter C: Distance from the centre of the workpiece to the upper surface of the workpiece stop 11.5 55.5 D 4 Retractable anvil range button(anvil-retraction button on the left side) Over 50 mm measuring Thickness: t Range 0 - 25 mm 25 - 50 3.5 mm 50 - 75 mm 75 - 100 mm 45 Workpiece stop (optional) 40 50 50 60 0.001 mm 60 000000 Code No. 510-123 and 510-133 Dmin Workpiece stop A 50 mm Workpiece stop B 54 mm Workpiece stop C 65 mm Dmax 61 mm 66 mm 75 mm C 27.5 mm 30.0 mm 35.5 mm Code No. 510-124 and 510-134 Dmin Workpiece stop A 75 mm Workpiece stop B 80 mm Workpiece stop C 91 mm Dmax 87 mm 92 mm 100 mm C 40.5 mm 43.0 mm 48.2 mm Retractable anvil button Heat shield Thickness: t Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-60 D 25 38 50 63 L 31.5 56.5 81.5 106.5 t 16.4 16 16 16 Micrometers SERIES 523 – Dial Snap Meter •Hard-coated crystal: enhanced oil and scratch resistance. •Easily settable adjustable limit markers for GO/±NG testing. •Equipped with an elevating workpiece stop as standard. •Measuring faces: Carbide. Technical Data Indicator Indicating range: ±0.06 mm / ±.0023" Repeatability of indication: 0.4 μm / .00002" Dial indication accuracy:1 μm / .00005" Flatness: 0.3 μm / .000012" Parallelism: 0.6 μm / .000024" for models up to 50 mm / 2", 1 μm / .00004" for models over 50 mm / 2" measuring range 523-121 SPECIFICATIONS Metric Code No. 523-121 523-122 523-123 523-124 Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm Dial graduation Measuring force 0.001 mm 5 - 10N Range 0 - 1" 1 - 2" 2 - 3" 3 - 4" Dial graduation Measuring force .00005" 5 - 10N Price £422.00 £477.00 £521.00 £577.00 Inch Code No. 523-131 523-132 523-133 523-134 Price £422.00 £477.00 £521.00 £577.00 DIMENSIONS Unit: mm L 89.5 11.5 69.5 15 ø10.8 Range D B •Suited to the measurement of mass produced parts. •Designed for measurement using a stand to enable a more stable measurement. •Greatly improved accuracy: indication error and graduation of 1 μm. •Water resistant to protection level IP54. •Indicator scale is large and easy-to-read. Anvil retraction button Work-stopper Range 0 - 25 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm D 25 35 47 60 L 31 56 81 106 B-61 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 146 – Groove Micrometer Technical Data Parallelism: 10 μm / .0004" •Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes. •Two-directional ratchet stop. 146-121 B 146-122 SPECIFICATIONS Metric Code No. 146-121 146-122 146-123 146-124 146-125 Range outside Range inside Graduation Accuracy 0 - 25 mm 1.6 - 26.5 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 26.5 - 51.5 mm 51.5 - 76.5 mm 76.5 - 101.5 mm 0.01 mm ±10 µm Range outside Range inside Graduation Accuracy 0 - 1" .055 - 1.05" 1 - 2" 2 - 3" 3 - 4" 1.05 - 2.05" 2.05 - 3.05" 3.05 - 4.05" .0001" ±.0004" Flange ø6.35 mm ø12.7 mm Price £172.00 £202.00 £211.00 £221.00 £239.00 Inch Code No. 146-131 146-132 146-133 146-134 146-135 Flange ø.25" ø.5" Price £172.00 £202.00 £211.00 £221.00 £260.00 DIMENSIONS Unit: mm 0.75 25 0.75 (35) 9.5 L 25 50 75 100 ø18 ø10 ø15 ø10 9.5 ø15 (35) ø5 25 ø5 ø3.5 ø3.5 0.75 ø6.35 ø6.35 ø6.35 ø6.35 ø18 146-121 32 3 47 17 32 3 47 17 0.75 L 0.75 ø18 ø15 ø10 A A 0.75 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. ø15 L ø10 ø12.7 ø12.7 0.75 ø6.35 ø6.35 ø12.7 ø12.7 ø18 0.75 146-124, 146-125 146-122, 146-123, (228.8) 32 3 47 17 32 3 47 17 (228.8) B-62 A 103.3 78.3 53.3 28.3 Micrometers SERIES 146 – Non-Rotating Spindle Groove Micrometer Technical Data •Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes. •Two-directional ratchet stop. Parallelism: 10 μm / .0004" 146-221 B 146-222 SPECIFICATIONS Metric Code No. 146-221 146-222 146-223 146-224 146-225 Range outside Range inside Graduation Accuracy 0 - 25 mm 1.6 - 26.5 mm 25 - 50 mm 50 - 75 mm 75 - 100 mm 26.5 - 51.5 mm 51.5 - 76.5 mm 76.5 - 101.5 mm 0.01 mm ±10 µm Range outside Range inside Graduation Accuracy 0 - 1" .055 - 1.05" 1 - 2" 2 - 3" 3 - 4" 1.05 - 2.05" 2.05 - 3.05" 3.05 - 4.05" .0001" ±.0004" Price £293.00 £331.00 £360.00 £370.00 £380.00 Flange ø6.35 mm ø12.7 mm Inch Code No. 146-231 146-232 146-233 146-234 146-235 Price £293.00 £331.00 £360.00 £370.00 £380.00 Flange ø.25" ø.5" DIMENSIONS Unit: mm 0.75 (34.5) 25 L 25 50 75 100 ø15 ø10 ø5 ø6.35 ø3.5 ø6.35 ø18 146-221 19.5 32 3 47 17 0.75 A 115 90 65 40 0.75 ø15 ø10 ø12.7 ø6.35 ø12.7 ø18 146-222, 146-223, 146-224, 146-225 A L 32 3 47 17 0.75 B-63 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 700 – Quick-Mini Technical Data Battery: SR44 (1 pc) 938882 •Lightweight and palm-sized. •Highly suitable for quick dimensional inspection of small, thin and delicate objects. •Functions: origin setting and zero-setting. •Application examples Measurement of small objects: pearls, jewels, shims for engine tappets and screws. Measurement of thin objects: printing paper, polyethylene bags, sheet materials, foods including noodles, lenses for glasses, media substrates, foils, thin plates and medical products including filter cloths. Measurement of fine lines and bars: fishing lines, dental reamers, pasta, drills for PCB and hard wiring. 700-118-20 SPECIFICATIONS Inch/Metric Code No. 700-118-20 Range 0 - 12 mm (0 - 5") Resolution 0.01 mm (.0005") Accuracy* ±0.02 mm (±.001") Price £62.80 * Excluding quantizing error. DIMENSIONS Unit: mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-64 B Micrometers SERIES 154 – Small Hole Gauge Set •Extra long for gauging deep and shallow holes, slots, and similar workpiece features. •Two sprung leaves are fully expanded inside a feature so that its size can be measured with an outside micrometer after extraction. B 154-902 SPECIFICATIONS Metric Code No. 4-gauge set 154-902 Gauges included 154-101 154-102 154-103 154-104 Inch Price Measuring range £56.60 3 - 13 mm 3 - 5 mm 5 - 7.5 mm 7.5 - 10 mm 10 - 13 mm Code No. 4-gauge set 154-901 Gauges included 154-105 154-106 154-107 154-108 Price Measuring range £56.60 .125 - .5" .125 - .2" .2 - .3" .3 - .4" .4 - .5" DIMENSIONS Unit: mm øD ød1 Clamp A 67 L Range 3 - 5 mm 5 - 7.5 mm 7.5 - 10 mm 10 - 13 mm B-65 ød1 2.8 - 5.2 4.8 - 7.8 7.3 - 10.3 9.8 - 13.2 L 90 97.6 108 øD 5.5 8.5 A 22.5 30 40 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 155 – Telescoping Gauge Set •A spring-loaded plunger expands within a bore (or groove) and is locked in place, allowing measurement of diameter (or width) with an outside micrometer after extraction. B 155-905 SPECIFICATIONS Metric Inch Code No. 6-gauge set 155-905 Gauges included 155-127 155-128 155-129 155-130 155-131 155-132 Price Range 8 - 150 mm £136.00 8 - 12.7 mm 12.7 - 19 mm 19 - 32 mm 32 - 54 mm 54 - 90 mm 90 - 150 mm £18.80 £23.00 £23.00 £27.70 £27.70 £27.70 Code No. 6-gauge set 155-903 Gauges included 155-121 155-122 155-123 155-124 155-125 155-126 Price Range .313 - 6" £136.00 .313 - .5" .5 - .75" .75 - 1.25" 1.25 - 2.125" 2.125 - 3.5" 3.5 - 6" £18.80 £23.00 £23.00 £27.70 £27.70 £27.70 DIMENSIONS Unit: mm ød2 øD Clamp ød1 L Range 8 - 12.7 mm 12.7 - 19 mm 19 - 32 mm 32 - 54 mm 54 - 90 mm 90 - 150 mm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-66 L 110 150 øD 5 ød1 4 ød2 3 5.5 5 3.5 8 7.5 6 Optional Accessories SERIES 167 – Setting Standards for Outside Micrometers Technical Data •Used for accurately setting outside micrometers at the start or end of the measuring range. Flatness: Parallelism: 0.3 μm 2 μm 167-108 B 167-145 167-103 167-101 SPECIFICATIONS and DIMENSIONS 12 6.35 (.25") Unit: mm A L Metric Code No. 167-101 167-102 167-103 11 Inch Length (L) 25 mm 50 mm 75 mm Tolerance ±1.5 µm ±2.0 µm ±2.5 µm A 18 40 Price £10.80 £11.00 £13.30 Code No. 167-141 167-142 167-143 Length (L) 1" 2" 3" Tolerance ±.00005" A 18 ±.0001" 40 Price £10.80 £11.00 £13.30 ø13 7.9 (.31") Unit: mm 60 L Metric Code No. 167-104 167-105 167-106 167-107 Inch Length (L) 100 mm 125 mm 150 mm 175 mm Tolerance ±3 µm ±3.5 µm ±4 µm ±4.5 µm Price £14.90 £16.70 £17.80 £20.00 B-67 Code No. 167-144 167-145 167-146 167-147 Length (L) 4" 5" 6" 7" Tolerance ±.0001" ±.00015" Price £14.90 £16.70 £17.80 £20.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. ø14 D Unit: mm 60 A L B Metric Code No. 167-108 167-109 167-110 167-111 167-112 167-113 167-114 167-115 167-116 167-117 167-118 167-119 Inch Length (L) 200 mm 225 mm 250 mm 275 mm 300 mm 325 mm 350 mm 375 mm 400 mm 425 mm 450 mm 475 mm Tolerance ±5.0 µm ±5.5 µm ±6.0 µm ±6.5 µm ±7 µm ±7.5 µm ±8 µm ±8.5 µm ±9 µm ±9.5 µm ±10 µm ±10.5 µm Price £22.90 £24.80 £27.40 £30.30 £33.20 £36.40 £39.90 £44.30 £49.50 £54.70 £59.70 £65.30 A 47 47 52 57 64 69 74 80 85 90 95 101 Code No. 167-148 167-149 167-150 167-151 167-152 167-153 167-154 167-155 167-156 167-157 167-158 167-159 Length (L) 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" Tolerance ±.00015" ±.0002" ±.0002" ±.0002" ±.00025 " ±.00025" ±.00025" ±.00025" ±.00025" ±.00025" ±.00025" ±.0003" A 47 47 52 57 64 69 74 80 85 90 95 101 Price £22.90 £24.80 £27.40 £30.30 £33.20 £36.40 £39.90 £44.30 £49.50 £54.70 £59.70 £65.30 ø17 11.9 (.47") Unit: mm 60 A L Metric Code No. Length (L) 167-120 500 mm 167-121 525 mm 167-122 550 mm 167-123 575 mm 167-124 600 mm 167-125 625 mm 167-126 650 mm 167-127 675 mm 167-128 700 mm 167-129 725 mm 167-130 750 mm 167-131 775 mm 167-132 800 mm 167-133 825 mm 167-134 850 mm 167-135 875 mm 167-136 900 mm 167-137 925 mm 167-138 950 mm 167-139 975 mm 167-140 1000 mm Available up to 2000 mm Inch Tolerance ±11 µm ±11.5 µm ±12.0 µm ±12.5 µm ±13 µm ±13.5 µm ±14 µm ±14.5 µm ±15 µm ±15.5 µm ±16 µm ±16.5 µm ±17 µm ±17.5 µm ±18 µm ±18.5 µm ±19 µm ±19.5 µm ±20 µm ±20.5 µm ±21 µm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. A 106 112 117 122 128 133 138 142 147 153 158 164 170 175 180 185 191 196 201 207 211 Price £70.30 £75.60 £81.40 £86.40 £91.80 £97.10 £103.00 £109.00 £116.00 £123.00 £131.00 £138.00 £146.00 £154.00 £164.00 £171.00 £180.00 £190.00 £198.00 £206.00 £265.00 Code No. Length (L) 167-160 20" 167-161 21" 167-162 22" 167-163 23" 167-164 24" 167-165 25" 167-166 26" 167-167 27" 167-168 28" 167-169 29" 167-170 30" 167-171 31" 167-172 32" 167-173 33" 167-174 34" 167-175 35" 167-176 36" 167-177 37" 167-178 38" 167-179 39" 167-180 40" Available up to 79" B-68 Tolerance ±.0003" ±.0003" ±.0003" ±.0003" ±.0003" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.00035" ±.0004" ±.0004" ±.0004" ±.0004" A 106 112 117 122 128 133 138 142 147 153 158 164 170 175 180 185 191 196 201 207 211 Price £70.30 £75.60 £81.40 £86.40 £91.80 £97.10 £103.00 £109.00 £116.00 £123.00 £131.00 £138.00 £146.00 £154.00 £164.00 £171.00 £180.00 £190.00 £198.00 £206.00 £265.00 Optional Accessories SERIES 167 – Setting Standards for Screw Thread Micrometers •Used for accurately setting screw thread micrometers at the start or end of the measuring range. 167-264 B 167-262 SPECIFICATIONS Metric Inch Code No. Length Metric (unified) θ = 60° 167-261 25 mm 167-262 50 mm 167-263 75 mm 167-264 100 mm 167-265 125 mm 167-266 150 mm 167-267 175 mm 167-268 200 mm 167-269 225 mm 167-270 250 mm 167-271 275 mm Whitworth θ = 55° 167-272 25 mm 167-273 50 mm 167-274 75 mm 167-275 100 mm 167-276 125 mm 167-277 150 mm 167-278 175 mm 167-279 200 mm 167-280 225 mm 167-281 250 mm 167-282 275 mm Accuracy Price ±4 µm ±5 µm ±6 µm ±7 µm ±8 µm ±9 µm ±10 µm ±11 µm ±12 µm ±13 µm ±14 µm £30.00 £32.00 £37.00 £41.20 £47.90 £50.10 £51.20 £65.00 £68.00 £68.00 £71.00 ±4 µm ±5 µm ±6 µm ±7 µm ±8 µm ±9 µm ±10 µm ±11 µm ±12 µm ±13 µm ±14 µm £30.00 £32.00 £37.00 £41.20 £43.40 £50.10 £51.20 £65.00 £68.00 £68.00 £71.00 Code No. Length (L) Metric (unified) θ = 60° 167-294 1" 167-295 2" 167-296 3" 167-297 4" 167-298 5" 167-299 6" Whitworth θ = 55° 167-283 1" 167-284 2" 167-285 3" 167-286 4" 167-287 5" 167-288 6" Accuracy Price ±.00015" ±.0002" ±.00025" ±.0003" ±.00035" ±.0004" £30.00 £32.00 £37.00 £41.20 £47.90 £56.00 ±.00015" ±.0002" ±.00025" ±.0003" ±.00035" ±.0004" £30.00 £32.00 £37.00 £41.20 £47.90 £56.00 SERIES 167 – Setting Standards for V-Anvil Micrometers ø25 •Specially designed for accurate setting of V-anvil micrometers. 167-329 SPECIFICATIONS Metric Code No. 167-327 167-328 167-329 167-330 167-331 167-332 167-333 Inch Length 5 mm 10 mm 25 mm 40 mm 55 mm 70 mm 85 mm Accuracy ±2 µm ±2 µm ±2 µm ±3 µm ±3 µm ±3 µm ±3 µm Type Plug Plug Plug Ring Ring Ring Ring Price £29.70 £34.00 £51.00 £88.00 £120.00 £152.00 £180.00 B-69 Code No. 167-337 167-338 167-339 167-340 167-341 167-342 167-343 Length .2" .4" 1" 1.6" 2.2" 2.8" 3.4" Accuracy ±.0001" ±.0001" ±.0001" ±.00015" ±.00015" ±.00015" ±.00015" Type Plug Plug Plug Ring Ring Ring Ring Price £29.70 £34.00 £51.00 £88.00 £120.00 £152.00 £180.00 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 157 – Optical Parallels •Designed to inspect parallelism and flatness of micrometer measuring faces. (See Quick Guide to Micrometers at the end of this section.) •Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. B 157-903 SPECIFICATIONS Metric Code No. Range of micrometer to be checked 157-903 0 - 25 mm 157-904 25 - 50 mm Sizes of parallels included in set 12.00, 12.12, 12.25, 12.37 mm 25.00, 25.12, 25.25, 13.37 mm Diameter Flatness Parallelism ø30 0.1 µm Remarks Price For 25 mm £323.00 For 50 mm £548.00 0.2 µm Inch Code No. Range of micrometer to be checked 157-901 0 - 1" 157-902 1 - 2" Sizes of parallels included Diameter Flatness Parallelism in set .5000",.5062", .5125", .5187" ø30 0.1 µm 0.2 µm 1.0000", 1.0062", 1.0125", 1.0187" Remarks Price For 1" £323.00 For 2" £548.00 SERIES 158 – Optical Flats •Used for inspecting the flatness of very flat surfaces. (See Quick Guide to Micrometers at the end of this section.) 158-118 SPECIFICATIONS Metric Code No. 158-117 158-118 158-119 158-120 Inch Thickness Diameter 12 mm ø45 15 mm ø60 Flatness grade 0.2 µm 0.1 µm 0.2 µm 0.1 µm Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Price £231.00 £249.00 £294.00 £330.00 Code No. Thickness Diameter Flatness grade 158-122 158-124 .5" .6" 1.8" 2.4" .000004" B-70 Price £249.00 £330.00 Optional Accessories Spindle Attachment Tips •Simple interchangeable tips attached to standard micrometer spindles enable measurement of contours otherwise unmeasurable (for 6.35 mm spindles only). •Measuring range changes when a spindle attachment tip is mounted: the maximum measuring range is 10 mm or less (accuracy is not guaranteed). Technical Data Tip length*: 10 mm ±5 μm * Excluding ball attachments 208066 B 208062 208063 208064 208065 208066 101468E 101468E SPECIFICATIONS Price ø2 ø2ø2 Spline £21.80 ø1 ø1ø1 Dimensions £21.80 0.75 0.75 0.75 208062 Tip type £21.80 0.5 0.5 0.5 Code No. £21.80 55 5 208063 Comparator 208064 Blade 30º 30º 30º 10 10 10 4.5 4.5 4.5 208065 30º 30º 30º Knife edge 0.7 0.7 0.7 Disc 101468M Metric ball (5 mm) 101468E Inch ball (.2") ø12.7 ø12.7 ø12.7 208066 £25.20 £7.90 — Micrometer Oil •Special lubricant for micrometers. 207000 SPECIFICATIONS Code No. 207000 Item Micrometer oil Remarks Quantity 30 ml B-71 Price £15.10 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Colour-Coded Ratchet and Speeder Covers •Ratchet and speeder covers in a choice of seven colours for use in instrument identification control schemes: red, blue, yellow, green, brown, black and grey. Standard outside micrometer B Ratchet Speeder RATCHET COVER SPECIFICATIONS SPEEDER COVER SPECIFICATIONS Code No. Colour Analogue type: 0 - 300 mm 04GZA239 Grey 985056 Black 985061 Red 985081 Blue 985071 Yellow 985076 Green 985066 Brown 950700 Grey Analogue type: 300 - 1000 mm 04GZA243 Grey Digimatic type: 0 - 300 mm* 04GZA241 Grey Material Price Steel £4.00 £5.40 £5.40 £5.40 £5.40 £5.40 £5.40 £4.00 Plastic £4.80 Plastic £4.80 Plastic Code No. 04GAA260 301708 301709 301713 301711 301712 301710 Colour Grey Black Red Blue Yellow Green Brown Material Plastic *Cannot be used for non-digital micrometers. Ratchet thimble micrometer QuantuMike Speeder SPEEDER COVER SPECIFICATIONS Code No. 04GAA899 04GAA900 04GAA901 04GAA902 04GAA903 04AAB208 Colour Black Red Yellow Green Blue Grey Material Plastic Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Price £1.40 £1.40 £1.40 £1.40 £1.40 £1.10 B-72 Price £9.60 £0.80 £0.80 £0.80 £0.80 £0.80 £0.80 Optional Accessories SERIES 156 – Micrometer Stands •Designed to allow benchtop use of hand micrometers or other gauges which have frames suitable for gripping by the clamp. B 156-105-10 156-105-10 156-102 156-101-10 SPECIFICATIONS 156-101-10 Code No. 156-101-10 156-105-10 156-102 156-103 Micrometer ranges Up to 100 mm (4")* 0 - 25 mm (0 - 1"), 25 - 50 mm (1 - 2") 125 - 300 mm (5 - 12") 300 - 1000 mm (12 - 40") Price £33.20 £26.10 £276.00 £643.00 Remarks Adjustable angle type Fixed angle type Vertical type * Items that cannot be mounted on these stands DIMENSIONS Unit: mm 0 - 18 156-101-10 ø28 Opening range: 14 - 36 156-102 62 74 910 113.5 0 - 10 30 90 ° 25° 120 156-103 220 35 40 35 155 156-101-10 156-103 156-105-10 ø24.8 4- 12 750 40 435 63 Opening range: 7 - 24 60 110 156-102 98 35 32 156-105-10 400 156-102 B-73 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Quick Guide to Precision Measuring Instruments Micrometers ■ Nomenclature Standard Analogue Outside Micrometer Measuring faces Spindle Sleeve Screw thread Adjusting nut Anvil B Frame Thimble Thimble scale Ratchet speeder Sleeve scale Index line Heat shield Spindle clamp Digimatic Outside Micrometer Measuring faces Spindle Index line Thimble Ratchet speeder Sleeve Anvil Frame Spindle lock Thimble scale Sleeve scale Output connector (not present in plain digital model) Display reading HOLD button ZERO (Incremental mode) / ABS (Absolute mode) setting button Heat shield Origin button B-74 ■ Special Purpose Micrometer Applications Blade micrometer Inside micrometer, caliper type Spline micrometer Narrow groove diameter. Recess diameter; groove width. Spline-root shaft diameter. Tube micrometer Point micrometer Screw thread micrometer Pipe thickness. Root diameter. Effective diameter of thread. Disc type outside micrometer Ball tooth thickness micrometer V-anvil micrometer Spur- and helical-gear root tangent dimension. Gear over-pin diameter. 3- and 5-flute cutting tool dimensions. B B-75 ■ How to Read the Scale ■ Measuring Force Limiting Device Micrometer with standard scale (graduation: 0.01 mm) (1) 0 7. mm (1)Sleeve scale reading (2)Thimble scale reading + 0.37mm 45 5 40 35 Micrometer reading (2) 7.37mm Note) 0.37 mm (2) is read at the position where the sleeve index line is aligned to the thimble graduations. 30 The thimble scale can be read directly to 0.01 mm, as shown above, but may also be estimated to 0.001 mm when the lines are nearly coincident because the line thickness is 1/5 of the spacing between them. Approx. +1 µm Approx. +2 µm (1) Index line Thimble scale Micrometer with 0 30 6 4 2 25 Index line 8 vernier0 5 scale Thimble scale 20 (2) Audible in operation Onehanded Remarks operation Ratchet stop Friction thimble (F type) Ratchet thimble (T type) Unsuitable No Suitable Smooth operation without shock or sound Yes Suitable Audible operation provides confirmation of constant measuring force Yes Suitable Audible operation provides confirmation of constant measuring force Ratchet thimble (graduation: 0.001 mm) 15 The vernier scale provided above the sleeve10index line enables direct readings to be made to within 0.001 mm. (3) 25 6. mm (1)Sleeve scale reading .21 mm (2)Thimble scale reading (3)Reading from the vernier scale marking and thimble graduation line + .003mm Micrometer reading 6.213mm 20 (2) 0 5 15 10 (1) ■ Measuring Face Detail 30’ spindle ø6.35 30 6 4 2 8 ø6.3 0 Audible clicking operation causes micro-shocks Yes Note) 0.21 mm (2) is read at the position where the index line is between two graduations (21 and 22 in this case). 0.003 30 mm (3) is read at the position 8 where one of the vernier64 graduations 25 aligns with one of the thimble (3) 2 graduations. 20 (2) Carbide tip 0 10 (1) Third decimal place on vernier scale ( 0.001 mm units) 5 6 4 2 0 2 9 mm Carbide tip 0 These drawings above are for illustration only and are not to scale 45 0 (1) spindle ø8 5 ø7.95 0 15 Micrometer with mechanical-digit display (digital step: 0.001 mm) 30’ 9 Vernier reading 0.004 mm (2) Index line Third decimal place Second decimal place First decimal place Millimetres + Tens of mm Counter reading .004 mm (2) .09 mm .9 mm (1) 2. mm 00. mm *Indicates four digits. 2.994 mm Note) 0.004 mm (2) is read at the position where a vernier graduation aligns with one of the thimble graduation lines. B-76 B 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 300 ■ Effect of Changing Support Method and Orientation (Unit: µm) Changing the support method and/or orientation of a micrometer after zero setting affects subsequent measuring results. The tables below highlight the measurement errors to be expected in three other cases after micrometers are zeroset in the ‘Supported at the bottom and centre' case. These actual results show that it is best to set and measure using the same orientation and support method. Supporting method Supported at the bottom and centre 200 Supported only at the centre Attitude 100 Maximum measuring length (mm) 50 0 -5.5 425 0 -2.5 The above graph shows micrometer frame expansion due to heat transfer from hand to frame when the frame is held in the bare hand which, as can be seen, may result in a significant measurement error due to temperatureinduced expansion. If the micrometer must be held by hand during measurement then try to minimize contact time. A heat insulator will reduce this effect considerably if fitted, or gloves may be worn. (Note that the above graph shows typical effects, and is not guaranteed). 525 625 725 825 925 1025 0 0 0 0 0 0 -5.5 -11.0 -9.5 -18.0 -22.5 -26.0 Supporting method Supported at the centre in a lateral orientation. Supported by hand downward. ■ Setting Standard Expansion with Change of Temperature (for 200 mm bar initially at 20˚C) Maximum measuring length (mm) +1.5 +2.0 -4.5 0 -9.5 -5.0 -14.0 -5.0 -4.5 -10.5 -10.0 -5.5 -19.0 -35.0 -27.0 -40.0 2 4 6 8 10 15 20 Time (minutes) 20 Attitude 325 425 525 625 725 825 925 1025 31°C 15 10 27°C 5 0 30 21°C 0 1 2 3 4 5 6 7 8 Lapse of time (minutes) 9 10 The above experimental graph shows how a particular micrometer standard expanded with time as people whose hand temperatures were different (as shown) held the end of it at a room temperature of 20°C. This graph shows that it is important not to set a micrometer while directly holding the micrometer setting standard but to make adjustments only while wearing gloves or lightly supporting the standard by its heat insulators. When performing a measurement, note also that it takes time until the expanded standard returns to the original length. (Note that the graph values are not guaranteed values but experimental values.) ■ Difference in Thermal Expansion between Micrometer and Setting Standard +3 +2 +1 0 -1 -2 -3 Hooke’s law states that strain in an elastic material is proportional to the stress causing that strain, providing the strain remains within the elastic limit for that material. 20°C ■ Hertz's Formulae 10°C 225 325 Abbe’s principle states that “maximum accuracy is obtained when the scale and the measurement axes are common”. This is because any variation in the relative angle ( ) of the moving measuring jaw on an instrument, such as a caliper jaw micrometer, causes displacement that is not measured on the instrument’s scale and this is an Abbe error ( = - L in the diagram). Spindle straightness error, play in the spindle guide or variation of measuring force can all cause to vary and the error increases with R. L ■ Hooke's Law 0°C 125 ■ Abbe’s Principle R Thermal expansion (µm) 325 Difference in expansion (µm) B Expansion (µm) ■ Micrometer Expansion due to Holding Frame with the Bare Hand 425 525 Nominal length (mm) In the above experiment, after the micrometer and its standard were left at a room temperature of 20ºC for about 24 hours for temperature stabilization, the start point was adjusted using the micrometer standard. Then, the micrometer with its standard were left at the temperatures of 0ºC and 10ºC for about the same period of time, and the start point was tested for shift. The above graph shows the results for each of the sizes from 125 through 525 mm at each temperature. This graph shows that both the micrometer and its standard must be left at the same location for at least several hours before adjusting the start point. (Note that the graph values are not guaranteed values but experimental values.) B-77 Hertz’s formulae give the apparent reduction in diameter of spheres and cylinders due to elastic compression when measured between plane surfaces. These formulae are useful for determining the deformation of a workpiece caused by the measuring force in point and line contact situations. P P L SøD 2 øD 2 2 (a) Sphere between two planes 2 (b) Cylinder between two planes Assuming that the material is steel and units are as follows: Modulus of elasticity: E =205 GPa Amount of deformation: (µm) Diameter of sphere or cylinder: D (mm) Length of cylinder: L (mm) Measuring force: P (N) a) Apparent reduction in diameter of sphere 3 1=0.82 √P2/D b) Apparent reduction in diameter of cylinder 3 2 =0.094·P/L √1/D ■ Major Measurement Errors of the Screw Micrometer Error cause Maximum possible error Error that might not be eliminated even with precautions Precautions for eliminating errors Micrometer feed error 3 μm Anvil angle error 1. Measure the angle error and correct ±5 μm assuming micrometer. the error of a half 2. the Adjust the micrometer using the same angle is 15 minutes thread gauge as the workpiece. ±3 μm expected measurement error of half angle Misaligned contact points +10 μm +3 μm ±10 μm 1. Use a micrometer with a low measuring force if possible. 2. Always use the ratchet stop. +3 μm 3. Adjust the micrometer using a thread gauge with the same pitch. Influence of measuring force 1. Correct the micrometer before use. ±1 μm 1. Perform correction calculation (angle). 2. Correct the length error. 3. Adjust the micrometer using the same thread gauge as the workpiece. 1. Perform correction calculation. L Length error of 2. Adjust the micrometer using the same ± 3+ μm thread gauge 25 thread gauge as the workpiece. 1. Minimize the angle error as much as JIS 2 grade error half angle ±229 2. possible. Workpiece thread of Measure the angle error and perform minutes angle error correction calculation. -91 μm 3. Use the three-wire method for a large +71 μm angle error. Angle error of thread gauge Cumulative error ±10 μm +3 μm ( ) ±1 μm (±117+40) μm ●One-wire method The pitch diameter of odd-fluted tap can be measured using the V-anvil micrometer with the one-wire method. Obtain the measured value (M1) and calculate M with equation (3) or (4). M1=Micrometer reading during one-wire measurement D =Odd-fluted tap diameter Tap with three flutes :M=3M1-2D ···························(3) Tap with five flutes :M=2.2360M1-1.23606D ·······(4) B Anvil Then, assign the calculated M to equation (1) or (2) to calculate the pitch diameter (E). Spindle Odd-fluted tap ■ Root Tangent Length Wire ±8 μm assuming the error of half angle is ±23 minutes +26 μm -12 μm Sm ■ Screw Pitch Diameter Measurement Formula for calculating a root tangent length (Sm): Sm = m cos 0 { (Zm - 0.5) + Z inv 0 } + 2 X m sin ●Three-wire method Screw pitch diameter can be measured with the three-wire method as shown in the figure. Calculate the pitch diameter (E) with equations (1) and (2). Formula for calculating the number of teeth within the root tangent length (Zm): Zm' = Z·K (f) + 0.5 ( Zm is the integer closest to Zm'.) 1 where, K (f) = { sec 0 √ (1 + 2f) 2 - cos 2 0 - inv 0 - 2f tan 0} Spindle d (×3) P E M ■ Gear Measurement Over-pin method Anvil dp dp Optimal wire size at D 0.577P 0.564P dm Thread type Metric thread or unified screw (60°) Whitworth thread (55°) m : Module 0: Pressure angle Z : Number of teeth X : Addendum modification coefficient Sm : Root tangent length Zm : Number of teeth within the root tangent length inv 20° 0.014904 inv 14.5° 0.0055448 Screw d=Wire diameter E=Screw pitch diameter M=Micrometer reading including three wires P=Screw pitch (Convert inches to millimetres for unified threads.) and, f = X Z dm Metric thread or unified screw (60°) E = M-3d+0.866025P .......(1) Whitworth thread (55°) E = M-3.16568d+0.960491P .......(2) 0 90º Z ■ Major Measurement Errors of the Three-Wire Method Error cause Pitch error (workpiece) Precautions for eliminating errors 1. Correct the pitch error ( p = E) µm assuming 2. Measure several points and adopt their ±18 that the pitch error average. is 0.02 mm. 3. Reduce single pitch errors. Error of half angle 1. Use the optimal wire diameter. (workpiece) 2. No correction is needed. 1. Use the optimal wire diameter. Due to anvil 2. Use the wire which has a diameter close to the average at the one wire difference side. 1. Use the predetermined measuring force appropriate for the pitch. Wire diameter error 2. Use the predetermined width of measurement edge. 3. Use a stable measuring force. Cumulative error Possible error Error that might not be eliminated even with precautions ±3 μm ±0.3 μm ±0.3 μm ±8 μm ±1 μm -3 μm -1 μm In the worst case +20 μm -35 μm When measured carefully +3 μm -5 μm (a) (b) For a gear with an even number of teeth: dg 0 dm = dp + cosø = dp + z·m·cos cosø For a gear with an odd number of teeth: dg dm = dp + cos ø · cos 90° = dp + z·m·cos cosø z however, dp X dp invø = – = – – inv z·m·cos 0 2z dg 2 ( ) ( Obtain ø (invø) from the involute function table. B-78 0 0 ( ) ·cos 90° z ) + 2tanz 0 ·X z : Number of teeth 0 : Pressure angle teeth m : Module X : Addendum modification coefficient ■ Testing Parallelism of Micrometer Measuring Faces Optical parallel reading direction on the spindle side B ■ General Notes on using the Micrometer 1. Carefully check the type, measuring range, accuracy, and other specifications to select the appropriate model for your application. 2. Leave the micrometer and workpiece at room temperature long enough for their temperatures to equalize before making a measurement. 3. Look directly at the index line when taking a reading against the thimble graduations. If the graduation lines are viewed from an angle, the correct alignment position of the lines cannot be read due to parallax error. Optical parallel (b) Fringes on the spindle side Parallelism can be estimated using an optical parallel held between the faces. Firstly, wring the parallel to the anvil measuring face. Then close the spindle on the parallel using normal measuring force and count the number of red interference fringes seen on the measuring face of the spindle in white light. Each fringe represents a half wavelength difference in height (0.32 μm for red fringes). In the above figure a parallelism of approximately 1 µm is obtained from 0.32 µm x 3=0.96 µm. (a) (c) Thimble Sleeve (a) From above the index line ■ Testing Flatness of Micrometer Measuring Faces Flatness can be estimated using an optical flat (or parallel) held against a face. Count the number of red interference fringes seen on the measuring face in white light. Each fringe represents a half wavelength difference in height (0.32 μm for red). (b) Looking directly at the index line Interference fringe reading direction (c) From below the index line 4. Wipe off the measuring faces of both the anvil and spindle with lint-free paper set the start (zero) point before measuring. Optical flat Optical flat Anvil Anvil Measuring face is curved by approximately 1.3 μm. (0.32 μm x 4 paired red fringes.) Measuring face is concave (or convex) approximately 0.6 μm deep. (0.32 μm x 2 continuous fringes) B-79 5. Wipe away any dust, chips and other debris from the circumference and measuring face of the spindle as part of daily maintenance. In addition, wipe off any stains and fingerprints on each part with dry cloth. 6. Use the constant-force device correctly so that measurements are performed with a consistent measuring force. 7. When mounting a micrometer in a micrometer stand, the stand should clamp the centre of the micrometer frame. Do not clamp it too tightly. B 8. Be careful not to drop or bump the micrometer on anything. Do not rotate the micrometer thimble using excessive force. If you believe a micrometer may have been damaged due to accidental mishandling, ensure that it is inspected for accuracy before further use. 9. After a long storage period or when there is no protective oil film visible, lightly apply anti-corrosion oil to the micrometer by wiping with a cloth soaked in it. 10. Notes on storage: Avoid storing the micrometer in direct sunlight. Store the micrometer in a ventilated place with low humidity. Store the micrometer in a place with little dust. Store the micrometer in a case or other container, which should not be kept on the floor. When storing the micrometer, always leave a gap of 0.1 to 1 mm between the measuring faces. Do not store the micrometer in a clamped state. B-80 Micrometer Heads SELECTION GUIDE B Mounted on measuring instruments and precision instruments, micrometer heads are used for various purposes including measurement, feeding and positioning. Recent developments in technology have seen the micrometer head widely utilized in precise feeding devices and cross-travel stages on laser instruments and manipulators, in addition to the usual duties on measurement jigs. In parallel with the application expansion, the customer’s needs have increased. To meet customer demands, Mitutoyo provides standard micrometer heads with different measuring ranges, stem type and body size. Furthermore, high-performance types of Digimatic Micrometer Head, 0.1 mm spindle-pitch models (standard 0.5 mm), etc., are now available for the new applications. Mitutoyo also provides customization services for special applications. Micrometer heads with customized spindle tips and precision leadscrews manufactured to customer specification can be offered even in one-off quantities. Measuring range 0 - 2.5 mm 0 - 6.5 mm 0 - 13 mm 0 - 15 mm 0 - 25 mm 0 - 50 mm 60 - 75 mm Main feature of head High-function Fine spindle feed of 0.25 mm/rev Standard Locking-screw type Small type Standard Short body High-function Fine spindle feed of 0.25 mm/rev Short body Standard Small standard type Small standard type with zero-adjustable thimble High-function Non-rotating spindle type Standard Small standard type with carbide-tipped spindle Digimatic Non-rotating spindle type Large thimble type for fine feed High-function XY-stage type Fine graduation and high accuracy Medium-sized standard type Standard Medium-sized standard type with 8 mm diameter spindle Digimatic Large thimble type for fine feed Non-rotating spindle and large thimble Medium-sized standard type with 8 mm diameter spindle Micro Jack Series 110 148 148 148 110 148 148 148 153 149 350 153 152 152 153 150 151 164 152 197 151 7 Page B-84 B-89 B-85 B-86 B-84 B-86 B-87 B-88 B-95 B-90 B-83 B-95 B-93 B-94 B-96 B-91 B-92 B-82 B-93 B-97 B-92 B-98 Note: Also refer to Quick Guide to Precision Measuring Instruments from page B-99. B-81 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 164 – Digimatic Rotatable Display Micrometer Head Functions Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading on the LCD to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. •The display is rotatable to enable easy reading from practically any direction. This feature is especially useful in XY-table applications. •The Digimatic output port enables inclusion in a statistical process control or networked measurement system. B 164-164 SPECIFICATIONS Optional Accessories Inch/Metric 959149: 959150: 06ADV380C: 02AZD790C: 02AZE140C: Code No. 164-164 SPC data cable with pushbutton(1 m) £34.60 SPC data cable with pushbutton (2 m) £39.40 USB Input Tool Direct USB-ITN-C (2 m) £90.80 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 Range 0 - 50 mm (0 - 2") Resolution 0.001 mm (.00005") Accuracy* ±3 µm (±.00015") Price £632.00 * Excluding quantizing error. DIMENSIONS Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Unit: mm B-82 Micrometer Heads SERIES 350 – Digimatic Micrometer Head •The Digimatic output port enables inclusion in a statistical process control or networked measurement system. B 350-351-10 350-352-10 SPECIFICATIONS Origin point setting (ABS measurement system): Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode. Zero setting (INC measurement system): A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode. Auto power ON/OFF: The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading on the LCD to reappear. Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Error alarm: In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. Optional Accessories Inch/Metric Code No. 350-351-10 350-352-10 Functions Range Resolution Accuracy* 0 - 25 mm (0 - 1") 0.001 mm (.00005") ±2 µm (±.0001") Stem type Plain Locknut Price £220.00 £260.00 * Excluding quantizing error. DIMENSIONS Unit: mm 42 350-351-10 114.5 (17) 05CZA662: 05CZA663: 06ADV380B: 02AZD790B: 02AZE140B: SPC data cable with pushbutton (1 m) £58.50 SPC data cable with pushbutton (2 m) £70.40 USB Input Tool Direct USB-ITN-B (2 m) £106.00 SPC data cable for U-WAVE-T (160 mm) £52.20 SPC data cable for U-WAVE-T and footswitch (160/500 mm) £119.00 (139.5) 58 ø10 0 -0.009 ø18 ø6.35 15 ( ): when retracting the spindle until its stroke end. 42 114.5 (17) 15 4 (139.5) ø18 ø14 ø6.35 350-352-10 58 M9.5x0.5 ( ): when retracting the spindle until its stroke end. B-83 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 110 – Differential Screw Micrometer Head •The differential movement of spindle threads and nuts allows ultra-fine feed. •Especially useful in precision translation type applications such as found in electronics component manufacture, optical alignment, etc. B 110-102 110-502 SPECIFICATIONS Metric Code No. Range Graduation Accuracy* 110-101 0.001 mm 0 - 2.5 mm 110-102 0.0001 mm Double thimble type Thimble (fine) Thimble (fine) 0 - 0.2 mm 0.0005 mm 110-502 Thimble (coarse) Thimble (coarse) 0 - 13 mm 0.01 mm Stem dia. Stem type Spindle end ±5 µm / ±1.5 µm 12 mm Locknut Flat (carbide tip) ±3 µm / ±1.5 µm 9.5 mm Locknut Spherical (SR3) Accuracy* Stem dia. Stem type Spindle end Graduation features Standard Fine Price £219.00 £242.00 Dual scales; 0.2 mm finefeed range £346.00 Graduation features Price Inch Code No. Range Graduation Double thimble type Thimble (fine) Thimble (fine) 0 - .006" .00002" ±.00015" / 110-504 Thimble (coarse) Thimble (coarse) ±.00006" 0 - .5" .001" .375" Locknut Spherical (SR3) Dual scales; 0.2 mm/.006" fine-feed range £346.00 * Wide range / narrow range DIMENSIONS ø8 110-101 110-102 ø16 Unit: mm 4 Speeder 0 ø12 -0.011 ø21 ø18.6 5 0 45 Locknut 12.7 M12x0.5 (35.2) 70 (95) ø21 ø9.5 Thimble (fine) Thimble (coarse) Set screw 5 4 3 2 5 1 ø5 SR3 4 0 -0.009 0 0 24 45 23 22 21 20 Locknut M9.5x0.5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. 15 (17) 30 67.5 (80.5) B-84 ø13 110-502 ø14 37.7 Micrometer Heads SERIES 148 – Short Range Small Micrometer Head Technical Data •Miniature micrometer heads for ease of incorporating into machines, jigs and fixtures. Graduation: 0.01 mm / .001" B 148-201 148-203 SPECIFICATIONS Metric Code No. 148-201 148-203 148-205 Range Accuracy Stem dia. 0 - 6.5 mm ±5 µm 6 mm Stem type Plain Locknut Plain Spherical (SR3) Price £39.00 £44.20 £44.50 Stem type Plain Spindle end Flat Price £39.00 Spindle end Flat Inch Code No. 148-202 Range 0 - .25" Accuracy ±.00025" Stem dia. .25" DIMENSIONS Unit: mm 148-201 Set screw ø3.5 0 ø6-0.008 148-205 ø9.3 10 0 40 6 (8.5) 21.7 (28.2) 3 ø3.5 148-203 ø3.5 ø6 0 ø6 -0.008 Set screw 10 0 -0.008 0 Set screw ø9.3 15 40 7.5 (8.5) 15 ø9.3 8 Locknut M6x0.5 10 0 40 6 (8.5) 21.7 (28.2) 22 (28.5) 15 3 ø3.5 ø6 0 -0.008 Set screw ø9.3 10 0 40 8 7.5 Locknut M6x0.5 (8.5) 15 B-85 22 (28.5) Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 148 – Short Body Micrometer Head Technical Data Graduation: Spindle pitch: •Short body design maintains measuring range for limited space applications. 0.01 mm 0.5 mm B 148-303 148-308 SPECIFICATIONS Metric Code No. 148-303 148-308 Range 0 - 6.5 mm 0 - 13 mm Accuracy Stem dia. ±2 µm 9.5 mm Stem type Plain Locknut Spindle end Flat Thimble dia. 20 mm 15 mm Price £59.60 £59.60 DIMENSIONS Unit: mm 148-303 148-308 0 ø9.5 -0.009 Set screw o 9.5 (12) 18.5 ø20 ø6.35 5 45 23.5 (30) Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-86 Micrometer Heads SERIES 148 – Small Standard Micrometer Head Technical Data •Measuring range 13 mm / .5". Graduation: Spindle pitch: Spindle end: Scale: 0.01 mm / .001" 0.5 mm / .025" Flat or spherical form, SKS-3 tool steel (more than HRC60), lapped surface Satin-chrome plated B 148-104 148-801 SPECIFICATIONS Metric Code No. Range Accuracy Stem dia. Stem type 148-104 148-801 148-821 0 - 13 mm ±2 µm 9.5 mm Plain Range Accuracy Stem dia. Stem type Spindle end Flat .375" Plain Plain Locknut Plain Spindle end Graduation features Flat Standard Spherical (SR4) Flat Reverse reading Price £39.70 £40.60 £40.20 Inch Code No. 148-112 148-811 148-814* 148-831 0 - .5" ±.0001" Spherical (SR4) Flat Graduation features Standard Reverse reading Price £39.70 £40.60 £56.50 £40.20 * with spindle lock DIMENSIONS Unit: mm 148-104 Set screw 0 ø9.5 -0.009 Spherical face 148-801 0 ø13 ø5 5 Reverse reading 148-821 45 (14) 27 45 3.5 9.5 0 31.5 5 (44.5) 148-814 148-814 B-87 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 148 – Adjustable Thimble Small Standard Micrometer Head Technical Data Graduation: Spindle pitch: 0.01 mm / .001" 0.5 mm / .025" •Measuring range 13 mm / .5". •The thimble can be set to zero at any position by loosening the setscrew. B 148-503 148-504 SPECIFICATIONS Metric Code No. 148-503 148-504* 148-853 148-854* 148-863 148-864* Range Accuracy 0 - 13 mm Stem dia. ±2 µm Stem type Plain Locknut Plain Locknut Plain Locknut 9.5 mm Spindle end Price £40.80 £47.40 £42.80 £49.00 £51.10 £49.90 Special features Flat Standard Spherical (SR4) Flat Reverse reading Spindle end Special features Inch Code No. 148-501 148-502* 148-851 148-852* 148-861 148-862* Range Accuracy Stem dia. Stem type Plain Locknut 0 - .5" ±.0001" Plain Locknut Plain Locknut .375" Price £40.80 £47.40 £42.80 £49.00 £51.10 £49.90 Flat Standard Spherical (SR4) Flat Reverse reading * with spindle lock DIMENSIONS Unit: mm Plain stem type Cap 0 ø9.5 -0.009 Spherical face ø13 ø5 5 0 Reverse reading 45 45 0 9.5 (12) 5 37 (50) 25 Stem locknut and spindle lock type ø15 Spindle lock ø5 5 0 45 9.5 (12) Locknut M9.5x0.5 25 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Cap Spherical face ø13 0 ø9.5 -0.009 4 ø14 Reverse reading 45 0 5 45.6 (58.6) B-88 Micrometer Heads SERIES 148 – Locking Screw Micrometer Head Technical Data •Locking screw provides secure locking at any position of the spindle. •Position of the locking screw is the same as the sleeve index line. Graduation: Spindle pitch: 0.01 mm / .001" 0.5 mm / .025" Locking screw B 148-220 Secure spindle SPECIFICATIONS Metric Code No. 148-220 Range 0 - 6.5 mm Accuracy ±5 µm Stem dia. 6 mm Stem type Plain Spindle end Flat Price £39.00 Range 0 - .25" Accuracy ±.00025" Stem dia. .25" Stem type Plain Spindle end Flat Price £39.00 Inch Code No. 148-230 DIMENSIONS Unit: mm Locking screw ø3.5 40 ø9.3 0 ø6 -0.008 (11.3) ø7 4.6 30 2.2 6 (8.5) 30.3 (36.8) 15 B-89 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 149 – Carbide Tipped Spindle Small Standard Micrometer Head Technical Data Graduation: Spindle pitch: •Carbide-tipped spindle provides high abrasion resistance. 0.01 mm / .001" 0.5 mm / .025" B 149-131 149-801 SPECIFICATIONS Metric Code No. 149-132 149-131 149-801 149-802 Range Accuracy Stem dia. 0 - 15 mm ±2 µm 9.5 mm Stem type Plain Locknut Plain Locknut Spindle end Flat Spherical (SR4) Price £39.70 £42.80 £40.60 £44.30 Inch Code No. 149-811 149-812 Range Accuracy Stem dia. 0 - .5" ±.0001" .375" Stem type Plain Locknut Spindle end Spherical (SR4) Price £40.60 £44.30 DIMENSIONS Unit: mm Plain stem type 0 ø9.5-0.009 Set screw Spherical face ø15 ø6.35 5 0 45 15 (17) 3.5 43.5 (58.5) 32 4 0 ø9.5 -0.009 Set screw Spherical face 0 45 ø15 5 ø6.35 ø14 Stem locknut type 15 Locknut M9.5x0.5 (17) 32 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. 43.5 (58.5) 3.5 B-90 Micrometer Heads SERIES 150 – Carbide Tipped Spindle Medium Standard Micrometer Head Technical Data •Measuring range of 25 mm. Spindle pitch: 0.5 mm / .025" B 150-801 150-191 SPECIFICATIONS Metric Code No. 150-190 150-192 150-191 150-801 150-802 150-821 150-822 Range Graduation 0.001 mm 0 - 25 mm Accuracy Stem dia. Stem type Spindle end Special features With vernier Flat Plain ±2 µm 0.01 mm 10 mm Locknut Plain Locknut Plain Locknut Spherical (SR4) Standard Reverse graduation Flat Price £56.20 £38.30 £38.30 £39.00 £40.60 £40.60 £43.70 Inch Code No. 150-206 150-208 150-207 150-811 150-812 150-831 150-832 Range Graduation .0001" 0 - 1" Accuracy Stem dia. Spindle end Special features With vernier Flat Plain ±.0001" .001" Stem type .375" Locknut Plain Locknut Plain Locknut Spherical (SR4) Standard Reverse graduation Flat Price £56.20 £38.30 £38.30 £39.00 £40.60 £40.60 £43.70 DIMENSIONS Unit: mm Spherical face Plain stem type 0 ø10-0.009 Ratchet 45 0 ø18 5 ø6.35 Reverse reading 0 5 45 42 15 (17) 67 17 With vernier (92) 5 6 4 2 0 0 5 45 ø14 ø6.35 Stem locknut type 4 Ratchet 0 ø10-0.009 Spherical face Reverse reading 5 45 ø18 0 0 45 Locknut M9.5x0.5 15 (17) 42 17 5 67 (92) B-91 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 151 – ø8 mm Spindle Medium Standard Micrometer Head Technical Data Spindle pitch: •Larger spindle for heavy-duty applications (normally ø6.35 mm). 0.5 mm / .025" B 151-224 151-223 151-255 SPECIFICATIONS Metric Code No. 151-224 151-223 151-222 151-221 151-256 151-255 Range Graduation Accuracy Stem dia. 0.01 mm 0 - 25 mm ±2 µm 12 mm 0.001 mm 0 - 50 mm 0.01 mm ±4 µm Range Graduation Accuracy Stem type Plain Locknut Plain Locknut Plain Locknut Spindle end Special features — Flat (carbide tip) With vernier — Price £56.20 £56.20 £56.20 £57.50 £111.00 £111.00 Inch Code No. 151-240 151-239 151-238 151-237 151-272 151-271 Stem dia. .001" 0 - 1" ±.0001" .5" .0001" 0 - 2" .001" ±.0002" Stem type Plain Locknut Plain Locknut Plain Locknut Spindle end Special features — Flat (carbide tip) With vernier — Price £56.20 £56.20 £56.20 £57.50 £111.00 £111.00 DIMENSIONS Unit: mm Stem locknut type 4 Ratchet 0 ø12 -0.011 5 ø21 5 0 0 45 29 (38) 17 Locknut M12x0.5 70 (95) 63 ø12 (95) 0 -0.011 ø8 ø21 0 5 17 70 Plain stem type (0 - 50 mm range) 5 0 45 63 With vernier 6 4 2 29 (38) ø21 ø8 ø8 Ratchet 0 ø12 -0.011 ø16 Plain stem type 45 17 29 (38) Stem locknut type (0 - 50 mm range) ø12 151-256 0 -0.011 17 (38) 103 (153) 88 151-255 230g ( ): when retracting the spindle until its stroke end. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. 225g ( ): when retracting the spindle until its stroke end. 29 M12x0.5 (153) 88 ø21 ø16 ø8 4 103 B-92 Micrometer Heads SERIES 152 – Large Diameter Thimble Micrometer Head •Large-diameter thimble provides high discrimination without the need for a vernier scale on standard range heads. •Bidirectional graduations for use in either direction. Technical Data Graduation: Spindle pitch: 0.002 mm / .0001" 0.5 mm / .025" B 152-348 SPECIFICATIONS Metric Code No. 152-348 152-380 Range 0 - 25 mm 0 - 50 mm Accuracy ±2 µm ±4 µm Stem dia. Stem type Spindle end Special features 12 mm Plain Flat (carbide tip) Bidirectional Range 0 - 1" 0 - 2" Accuracy Stem dia. Stem type Spindle end Special features Locknut Flat (carbide tip) Bidirectional Price £267.00 £337.00 Inch Code No. 152-372 152-388 ±.0001" .5" Price £267.00 £337.00 DIMENSIONS Unit: mm ø12 -0.011 152-348 120 ø8 0 100 80 Speeder 60 40 0 480 ø49 20 460 440 420 29 (38) 400 380 66 63 (91) 12 10 8 40 42 44 4 46 2 48 0 0 48 2 46 44 29 (38) 38 6 Speeder ø49 ø8 0 ø12 -0.011 152-380 4 6 42 8 40 10 38 12 99 88 (149) B-93 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 152 – XY-Stage Micrometer Head Technical Data Graduation: Spindle pitch: 0.005 mm / .0001" 1 mm / .025" •Bidirectional graduations for use in either direction, suitable for cross-travel stage translation in X and Y. •Spindle end: Flat form and hardened, or spherical with carbide tip (more than HRA90), lapped surface. •Rotating collar on thimble enables zero setting at any position. •Non-rotating device on spindle reduces workpiece deformation and wear. B 152-390 SPECIFICATIONS Metric Code No. 152-390 152-389 Range Accuracy Stem dia. Stem type 0 - 25 mm ±2 µm 18 mm Plain Range Accuracy Stem dia. Stem type 0 - 1" ±.0001" .709" Plain Special features For X-axis, bidirectional For Y-axis, bidirectional Price £154.00 £154.00 Special features For X-axis, bidirectional For Y-axis, bidirectional Price £154.00 £154.00 Inch Code No. 152-392 152-391 DIMENSIONS Unit: mm 1.5 0 ø18-0.011 20 80 10 90 0 0 90 10 80 20 Speeder 10 ø5.5 7 14 (27.7) 66 (91) 52.7 80 90 10 0 0 10 90 80 20 20 152-389 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. ø49 ø8 ø6.35 ø11 152-390 B-94 Micrometer Heads SERIES 153 – Non-Rotating Spindle Micrometer Head Technical Data •Torsion-free feed reduces workpiece deformation and wear. Spindle pitch: 0.5 mm / .025" B 153-101 153-202 SPECIFICATIONS Metric Code No. 153-101 153-201* 153-202* Range 0 - 15 mm 0 - 25 mm Graduation 0.01 mm Accuracy ±3 µm 0.001 mm Stem dia. 9.5 mm 12 mm With vernier Price £79.20 £86.10 £86.50 Special features — With vernier Price £86.10 £86.50 Stem type Spindle end Special features Plain Flat (carbide tip) — Inch Code No. 153-205* 153-206* Range Graduation .001" .0001" 0 - 1" Accuracy Stem dia. ±.00015" .5" Stem type Spindle end Plain Flat (carbide tip) * with ratchet stop DIMENSIONS Unit: mm ø14.8 ø6.35 0 ø9.5 -0.009 153-101 Cap ø15.3 5 0 45 10 (12) 58.5 (73.5) 27 ø14.8 ø8 ø12 0 –0.011 153-201 Ratchet 153-202 with vernier 0 ø18 5 45 10 (12) 37 5 6 4 2 0 0 87.5 5 45 (112.5) B-95 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 153 – Large Diameter Thimble High Accuracy Micrometer Head Technical Data Graduation: Spindle pitch: 0.0005 mm / .00001" 0.5 mm / .025" •Fine graduation and high accuracy model. •Non-rotating spindle reduces workpiece deformation and wear. •Bidirectional graduations for use in either direction. B 153-301 SPECIFICATIONS Metric 0 - 25 mm Stem dia. Stem type 18 mm Plain Code No. Range 153-302 0 - 1" A Accuracy ±.00005" / ±.00003" Stem dia. Stem type .709" Plain ø38.1 ø8 Inch 44 2 48 0 2.0 0.5 1.5 1.0 1.0 1.5 0.5 2.0 0 1 49 0 0 46 4 45 5 44 6 Spindle end Special features 49 1 Flat 48 2 Bidirectional (carbide tip) 47 3 31.8 DIMENSIONS 6 (35.4) ø38.1 31.8 (35.4) 45 4 46 3 47 2 48 1 49 0 0 49 1 48 2 47 3 46 4 45 5 44 6 ( ): With spindle fully retracted. 120° View from A Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. Unit: mm 120° View from A (100) 120° £789.00 (100) 120° 75 60.4 Price ø85.5 0 -0.02 ø18 ø8 A 0 2.0 0.5 1.5 1.0 1.0 1.5 0.5 2.0 0 44 5 £789.00 75 60.4 6 Price Spindle end Special features 5 45 Flat 4 46 Bidirectional (carbide tip) 3 47 ø85.5 153-301 Accuracy ±1 µm / ±0.5 µm 0 -0.02 Range ø18 Code No. 3-M4X0.7 PCD28 B-96 3-M4X0.7 PCD28 Micrometer Heads SERIES 197 – Large Diameter Thimble Non-Rotating Spindle Micrometer Head Technical Data •Large thimble micrometer head with non-rotating spindle. •Floating thimble allows easy zero setting at any spindle position. •Dual-spindle mechanism for quick feed of 1 mm/rev (standard models: 0.5 mm/rev). Graduation: Spindle pitch: 0.005 mm / .0002" 1 mm / .05" B 197-101 SPECIFICATIONS Metric Code No. Range Accuracy Stem dia. Stem type 197-101 0 - 50 mm ±5 µm 18 mm Plain Code No. Range Accuracy Stem dia. Stem type 197-201 0 - 2" ±.0001" .709" Plain Spindle end Special features Flat Bidirectional (carbide tip) Price £302.00 Inch Spindle end Special features Flat Bidirectional (carbide tip) Price £302.00 DIMENSIONS 20 80 Speeder 10 90 0 ø49 ø8 0 ø18 -0.011 Unit: mm 0 90 10 80 20 14 (29) 64 (89) 79 ( ): With spindle fully retracted. B-97 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. SERIES 7 – Micro Jack Technical Data Graduation: 0.01 mm •Used for accurate levelling of machines, surface plates, and precision instruments. •Zero-setting is possible at any position. •Easy adjustment under heavy load. B 7850 SPECIFICATIONS Metric Code No. 7850 Handle force at max. loading 90 N Range 60 - 75 mm Remarks Max. load: 400 kg Price £292.00 DIMENSIONS Unit: mm (85) ø15 60 15 SR1x90° 8 ø40 (recessed) ø64 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. Therefore the company reserves the right to change any or all aspects of any product specification without notice. B-98 Quick Guide to Precision Measuring Instruments Micrometer Heads Key Factors in Selection Key factors in selecting a micrometer head are the measuring range, spindle face material and shape, accuracy, stem type, graduation style and thimble diameter. ■ Stem ■ Constant-Force Device Plain stem Stem locknut type B ●The stem used to mount a micrometer head is classified as a plain or locknut type as illustrated above. The stem diameter is manufactured to a nominal Metric or Imperial size with an h6 tolerance. ●The clamp nut stem allows fast and secure clamping of the micrometer head. The plain stem has the advantage of wider application and slight positional adjustment in the axial direction on final installation, although it does requires a split-fixture clamping arrangement or adhesive fixing. ●General-purpose mounting fixtures are available as optional accessories. ■ Measuring Face Flat face Spherical face Micrometer head with constant-force device Micrometer head without constantforce device (no ratchet) ■ Spindle Lock ●If a micrometer head is used as a stop it is desirable to use a head fitted with a spindle lock so that the setting will not change even under repeated shock loading. Anti-rotation device ●A flat measuring face is often specified where a micrometer head is used in measurement applications. ●When a micrometer head is used as a feed device, a spherical face can minimize errors due to misalignment (Figure A). Alternatively, a flat face on the spindle can bear against a sphere, such as a carbide ball (Figure B). ●A non-rotating spindle type micrometer head or one fitted with an antirotation device on the spindle (Figure C) can be used if a twisting action on the workpiece must be avoided. ●If a micrometer head is used as a stop then a flat face both on the spindle and the object it contacts provides durability. Figure A ●A micrometer head fitted with a constant-force device (ratchet or friction thimble) is recommended for measurement applications. ●If using a micrometer head as a stop, or where saving space is a priority, a head without a ratchet is probably the best choice. Figure C ■ Measuring Range (Stroke) ●When choosing a measuring range for a micrometer head, allow an adequate margin in consideration of the expected measurement stroke. Six stroke ranges, 5 to 50 mm, are available for standard micrometer heads. ●Even if an expected stroke is small, such as 2 mm to 3 mm, it will be cost effective to choose a 25 mm-stroke model as long as there is enough space for installation. ●If a long stroke of over 50 mm is required, the concurrent use of a gauge block can extend the effective measuring range. (Figure D) Figure D Figure B Gauge block Head’s stroke Obtained stroke ■ Non-Rotating Spindle ● A non-rotating spindle type head does not exert a twisting action on a workpiece, which may be an important factor in some applications. ●In this guide, the range (or stroke end) of the thimble is indicated by a dashed line. For stroke ends, consider the thimble as moving to the position indicated by the line when designing the jig. ■ Spindle Thread Pitch ■ Ultra-Fine Feed Applications ●The standard type head has 0.5 mm pitch. ●1 mm-pitch type: quicker to set than standard type and avoids the possibility of a 0.5 mm reading error. Excellent load-bearing characteristics due to larger screw thread. ●0.25 mm or 0.1 mm-pitch type This type is the best for fine-feed or fine-positioning applications. ●Dedicated micrometer heads are available for manipulator applications, etc., which require ultra-fine feed or adjustment of spindle. B-99 ■ Thimble Diameter ■ Graduation Styles ●The diameter of a thimble greatly affects its usability and the fineness of positioning. A small-diameter thimble allows quick positioning whereas a large-diameter thimble allows fine positioning and easy reading of the graduations. Some models combine the advantages of both features by mounting a coarse-feed thimble (speeder) on the large-diameter thimble. ●Care is needed when taking a reading from a mechanical micrometer head, especially if the user is unfamiliar with the model. ●The normal graduation style, identical to that of an outside micrometer, is the standard. For this style the reading increases as the spindle retracts into the body. ●On the contrary, in the reverse graduation style the reading increases as the spindle advances out of the body. ●The bidirectional graduation style is intended to facilitate measurement in either direction by using black numerals for normal, and red numerals for reverse, operation. ●Micrometer heads with a mechanical or electronic digital display, which allow direct reading of a measurement value, are also available. These types are free from misreading errors. A further advantage is that the electronic digital display type can enable computer-based storage and statistical processing of measurement data. 20 80 10 90 5 0 45 5 25 20 0 0 5 25 20 0 0 0 5 45 Normal graduation style 90 10 Reverse graduation style 80 20 Bidirectional graduation style ■ Guidelines for Self-Made Fixtures A micrometer head should be mounted by the stem in an accurately machined hole using a clamping method that does not exert excessive force on the stem. There are three common mounting methods as shown below. Method 3 is not recommended. Adopt methods (1) or (2) wherever possible. (Unit: mm) (1) Clamp nut Mounting method (2) Split-body clamp (3) Setscrew clamp Face A Points to keep in mind Stem diameter Mounting hole Fitting tolerance Precautions ø9.5 ø10 G7 +0.005 to +0.020 ø12 ø18 G7 +0.006 to +0.024 ø9.5 ø10 G7 +0.005 to +0.020 ø12 ø18 G7 +0.006 to +0.024 Care should be taken to make Face A square to the Remove burrs generated on the wall of the mounting hole. The stem can be clamped without any problem at mounting hole by the slitting operation. squareness within 0.16/6.5. ø9.5 ø10 H5 0 to +0.006 ø12 ø18 H5 0 to +0.008 M3x0.5 or M4x0.7 is an appropriate size for the setscrew. Use a brass plug under setscrew (if thickness of fixture allows) to avoid damaging stem. B-100 B ■ Maximum Loading Capacity On Micrometer Heads The maximum loading capacity of a micrometer head depends mainly on the method of mounting and whether the loading is static or dynamic (used as a stop, for example). Therefore the maximum loading capacity of each model cannot be definitively specified. The loading limits recommended by Mitutoyo (at less than 100,000 revolutions if used for measuring within the guaranteed accuracy range) and the results of static load tests using a small micrometer head are given below. 1. Recommended maximum loading limit B Standard type (spindle pitch: 0.5 mm) Spindle pitch: 0.1 mm/0.25 mm Spindle pitch: 0.5 mm High-functionality type Spindle pitch: 1.0 mm Non-rotating spindle MHF micro-fine feed type (with a differential mechanism) * Up to approx. 2 kgf only for MHT Maximum loading limit Up to approx. 4 kgf * Up to approx. 2 kgf Up to approx. 4 kgf Up to approx. 6 kgf Up to approx. 2 kgf Up to approx. 2 kgf 2. Static load test for micrometer heads (using MHS for this test) (1) Locknut (2) Split-body clamp (3) Setscrew clamp P P Locknut Setscrew P Split-body clamp Test method Micrometer heads were set up as shown and the force at which the head was damaged or pushed out of the fixture when a static load was applied, in direction P, was measured. (In the tests no account was taken of the guaranteed accuracy range.) Mounting method Damaging / dislodging load* (1) Locknut Damage to the main unit will occur at 8.63 to 9.8kN (880 to 1000 kgf). (2) Split-body clamp The main unit will be pushed out of the fixture at 0.69 to 0.98kN (70 to 100 kgf). (3) Setscrew clamp Damage to the setscrew will occur at 0.69 to 1.08kN (70 to 110 kgf). * These load values should only be used as an approximate guide. B-101 ●先端球面 ●スタンダード 0 5 10 5 15 0 ●スタンダード ■ Custom-Built Products (examples) ●先端球面 ●スプライン 45 ●ストレート ●スプライン ●先端球面 ●スタンダード ●めねじ加工 Micrometer heads have applications in many fields of science and industry5 and Mitutoyo offers a wide range of standard models to meet customers’ needs. 45 25 20 15 10 0 5 10 15 However, in those cases where the standard product is not suitable, Mitutoyo can custom build a head incorporating features better suited to your special 0 is required. application. Please feel free to contact Mitutoyo about the possibilities – even if only one custom-manufactured piece 0 ●フランジ ●ナット付 45 1. Spindle-end types ● Pointed ● Spline ●先端球面 20 15 45 10 ●めねじ加工 15 ● Long ●ブレード 5 spindle type is also available. Please consult Mitutoyo. (直進タイプのみ) 0 0 45 ●●総ねじ Threaded ●ブレード 0 3. Scale graduation schemes 5 ●フランジ ●めねじ加工 ●ブレード (直進タイプのみ) 5 45 ●ブレード (直進タイプのみ) 25 20 15 10 45 ●フランジ 0 15 0 0 5 10 10 5 15 0 ●総ねじ 20 ●ナット付 25 45 5 ●めねじ加工 0 10 15 15 10 ●フランジ 20 45 5 Various barrel and thimble scale graduation schemes, such as reverse and vertical, are available. Please consult Mitutoyo for ordering a custom scheme not shown here. ●総ねじ ●フランジ ● Flanged (直進タイプのみ) 5 25 10 5 ●フランジ 0 ●スプライン ト付 ●●ナッ Locknut ●めねじ加工 ●スプライン 5 ●フランジ 0 0 A custom stem can be manufactured to suit the mounting fixture. 45 ●●ストレート Plain 0 45 2. Stem types B 5 25 ●スプライン 15 5 15 ●Blade (for non-rotating spindle type only) ●ブレード (直進タイプのみ) ●総ねじ ●ナット付 10 10 ● Flanged ●フランジ 5 5 ● Tapped 45 0 5 ●めねじ加工 ●スプライン ●ストレート ●先端球面 ●ストレート 0 ● Spherical ● Standard ●スタンダード ●めねじ加工 ●スプライン ●先端球面 ●スタンダード 4. Logo engraving A specific logo can be engraved as required. ●フランジ 0 5 5 25 20 15 10 0 5 10 15 5 0 0 0 0 45 45 5 ● Offset zero 45 ●ラチェット 0 0 0 0 ●止めねじ 45 10 15 5 20 5 25 0 5 5 15 10 10 5 45 45 5 5 45 5 10 10 0 15 15 45 20 20 45 ● Graduations only 0 25 ● Reverse vertical 25 ●ラチェット 0 5 45 5 5 ●ブレード ●フランジ (直進タイプのみ) 10 15 15 15 10 10 5 10 5 ● Vertical 0 5 0 ● Reverse 45 0 ●ブレード (直進タイプのみ) 20 ● Standard 25 ●フランジ 45 10 15 20 25 5 15 Thimble mounting methods including a ratchet, setscrew, and hex-socket head 5 10 types 5 0 available. 5 screw are 10 Couplings motor 5 10 5 for 0providing 5 drive to a head can be designed. 5 6. Thimble mounting 0 5. Motor coupling 0 0 0 ●ラチェット ● Ratchet 10 5 0 5 45 5 5 0 5 0 45 5 0 ●止めねじ ● Setscrew 45 ●六角穴付ボルト ● Hex-socket head screw 5 0 10 5 10 15 20 25 45 45 7. Spindle-thread pitch Pitches of 1 mm for fast-feed applications or 0.25 mm for fine-feed can be●止めねじ supplied as alternatives to the●六角穴付ボルト standard 0.5 mm. Inch pitches are also supported. Please consult Mitutoyo for details. 8. Lubricant for spindle threads 9. All-stainless construction 10. Simple packaging Lubrication arrangements can be 45 specified by the customer. All components of a head can be manufactured in stainless steel. Large-quantity orders of micrometer heads can be delivered in simple packaging for OEM purposes. 0 ●六角穴付ボルト B-102
Similar documents
Digimatic Micrometer
• Enabling 0.1μm resolution measurement, this micrometer is ideal for customers who need to make highly accurate measurements with a hand-held tool. • The High-Accuracy Digimatic Micrometer utilize...
More information