Duncan Bolt

Transcription

Duncan Bolt

Truck and Trailer
Fasteners & Accessories
DUNCAN BOLT
Third Edition
"3 Locations to Serve You!"
TOLL FREE (800) 798-1939 • www.duncanbolt.com • FAX (562) 698-8831
D
DUNCAN BOLT
uncan Bolt is pleased to offer our newest
"Truck and Trailer Repair" catalog. We’ve
added more information on Huck Bolts, Drill Bits,
Cable Ties, Lower Rail Bolts and many other new
products. Remember, this catalog ISN'T all we
stock or sell. It is a small sampling of the items
used in repairing Truck Cabs and Trailers.
Please call us at (800) 798-1939 and we’ll be
happy to try to help you with the finest products
from HUCK®, AVK®, POP®, MARSON®,
GESIPA®, ITW BUILDEX®, ANCHOR® BOLT,
and many many others. And, just arrived, we have
Dormer Drill Bits and AMCO Drive Bits.
We also want to welcome you to our newest facility
in California's Inland Empire, located at 8801
Onyx, Suite A, in the city of Rancho Cucamonga.
The telephone number is (909) 581-6740. Thanks
for trying us at Duncan Bolt and we hope to be of
service to you.
— Andy Cohn
President
DUNCAN
CONTENTS
Huck MAGNA-GRIP®Fasteners for Cabs .......................................4
Huck MAGNA-LOK®for Cabs.........................................................5
Huck Trailer Fasteners & Collars................................................6-7
Hucktainer® Fasteners.................................................................8
Truck Frame Fasteners..................................................................9
Truck Frame Kits.........................................................................10
Drill Bits......................................................................................11
Solid Rivets................................................................................12
Rivet Sets & Accessories...............................................................13
Blind Rivets...........................................................................14-15
Olympic Bulb-tite Rivets..........................................................16-17
AVK®Inserts & Tools...............................................................18-19
Primary Wire & Nylon Cable Clamps..........................................20
Cable Ties & Split Loom...............................................................21
Electrical Terminals (hooks, rings, disconnects)......................22-23
Grade 8 Alloy Frame Bolts......................................................24-25
Bottom Rail Bolts & Crossmember Bolt Kits.................................25
Air Brake Fittings...................................................................26-27
Nylon Drive & Roll-up Door Rivets...............................................27
Hose Clamps..............................................................................28
Recoil®Thread Repair Kits..........................................................29
Wire Clips, Tube Clips & Battery Lugs..........................................29
Assorted Drive Bits......................................................................30
Floor Screws, Caulking & Adhesives.............................................31
Abrasive Products.......................................................................32
Parts & Accessories.....................................................................32
Fastener Reference Guides.....................................................34-35
Pneudraulic Tooling...................................................................36
Visit us in the Inland Empire:
8801 Onyx, Suite A
Rancho Cucamonga, CA 91730
Visit us in Southern California:
8535 Dice Road
Santa Fe Springs, CA 90670
Visit us in Phoenix, Arizona:
4026 East Broadway, Suite 902
Phoenix, AZ 85040
(909) 581-6740
Fax (909) 581-6745
(562) 698-8800
Fax (562) 698-8831
(602) 426-1422
Fax (602) 426-1425
or call toll-free (800) 798-1939 or visit us on the Web at www.duncanbolt.com
or e-mail your request to [email protected]
Duncan Bolt
1
2
3
Page 3
Truck and Trailer Fasteners
1) MAGNA-GRIP® FASTENER: Provides a strong, rattle-resistant, wide
grip range fastening solution. Spec them for lower rub rails, steps, roof caps,
side sheets and cab assembly.
2) C6L FASTENER: Made in aluminum, carbon steel and stainless steel.
Gives you a high-strength, consistent, non-loosening clamp. Ideal for corner
castings, drip mountings, fender attachments, back and side assembly,
radiator mountings and steps. Also available in a stainless clad head for rust
free service (production quantities only).
3) MGP-30 FASTENER: A metal-to-metal low profile fastener effective
for tamper resistant trailer door assembly.
4) MAGNA-BULB® FASTENER: Especially suited to high-volume and
automatic installations involving thin or low-strength materials such as
plastic, aluminum and fiberglass, as well as repair applications in out-ofround holes.
5) MAGNA-LOK® FASTENER: A blind side fastener for sheet metal
with circle-seal lock that makes it vibration resistant. Available in aluminum,
carbon and stainless steel, the Magna-Lok fastener is designed for roof caps,
side sheets, corner castings, roof liners and warning light assemblies.
6) B.O.M.® FASTENER: Huck’s structural blind oversized fastener for
internal frame supports, mounting brackets, and doors.
7) HUCKTAINER® FASTENER: A two piece fastener designed for
4
5
6
7
8
9
fiberglass, plastic and metal-clad plywood to metal fastening. Provides a
weather-proof, tamper-proof, uniform clamp.
8) MAGNA-TITE® FASTENER: An advanced watertight, polymer
sealant makes Magna-Tite perfect for oversize holes and repair applications.
It's built in a wide grip range and its large blind side footprint substantially
reduces fastener pull-out for installation in thin or low-strength materials
such as aluminum, fiberglass and plastic.
9) HP8® FASTENER: A two piece, Grade 8 fastener designed for
permanent installation. Handles tough jobs like cross members, frame
assembly, spring hangers and fifth wheels.
10) HUCK-FIT® FASTENER: Huck’s newest Grade 8 fastener with
prealigning fit-up capabilities. Comparable to the HP8 in frames, fifth wheel
assembly and engine mounts. The Huck-Fit fastener offers a removability
option.
10
Page 4
Duncan Bolt
HUCK® PARTS FOR TRUCKS (CABS)
MAGNAGRIP®
3/16"Magnagrips (MGP98T)
Standard Collar
The truck cab repair fastener. Head looks like a Brazier head rivet. Available in short
and long grip; 3/16 diameter only in Steel-Zinc plate and in Aluminum.
Steel P/N
ALUM P/N
Grip Length
MGP98T-R6-10G
MGP98T-R6-20G
MGP98T-E6-10
MGP98T-E6-20
1/16 to 5/8
5/8 to 1 1/4
Steel P/N
ALUM P/N
Grip Length
MGPB-R8-10G
MGPB-R8-20G
MGPB-E8-10
MGPB-E8-20
1/16 to 5/8
5/8 to 1 1/4
Steel P/N
ALUM P/N
Grip Length
MGPT-R8-10G
MGPT-R8-20G
MGPT-E8-10
MGPT-E8-20
1/16 to 5/8
5/8 to 1 1/4
Steel
3/16 MGC-R6U
1/4 MGC-R8U
Aluminum
MGC-F6
MGC-F8
1/4" Magnagrips (MGPB)
Brazier Head
Truss Head
Large Flange Collar
Steel
3/16 MGCW-R6U
1/4 MGCW-R8U
Aluminum
MGCW-F6
5/16-3/8" Magnagrips (MGPB)
Dia.
(No.)
Grip
No.
(10)
22
.625-1.375 .328
26
.812-1.625 .390
5/16
3/8
(12)
12
14
Grip
Range
.125-.750
.125-.875
Hole
Siz
.328
.390
Special Peterbilt Collar
A
B
C
.307-.311
.703-.797
.127-.141
.369-.375
.828-.922
.152-.168
.307-.311
.369-.375
.703-.797
.828-.922
.127-.141
MGPB-R6U
.190-.200
STAINLESS GRILLE FASTENERS
An offshoot of the older C6L style fastener, the C98LT is still used in stainless steel with polished heads for grilles and a few
other decorative spots. Available in 3/16 inch diameter only in a limited range of sizes. Each head is hand polished. Packed in
bags of 25 pieces.
P/N
C98LT-U6-3BR
C98LT-U6-5BR
C98LT-U6-7BR
C98LT-U6-9BR
C98LT-U6-12BR
GRIP
1/8 to1/4
1/4 to 3/8
3/8 to 1/2
1/2 to 5/8
11/16 to 13/16
Collar 2LC-R6G
Santa Fe Springs, CA (562) 698-8800 • Rancho Cucamonga, CA (909) 581-6740 • Phoenix (602) 426-1422
Page 5
Duncan Bolt
Magna-Lok®
Strong, consistent and reliable.Employing a unique solid-circle lock, the Magna-Lok® fastener
creates an internal lock during installation that virtually eliminates pin pushout.
Protruding Head
Dia.
(No.) Steel
3/16 (6) MGLP-R6-4
MGLP
1/4 (8)
MGLP-R6-7
MGLP-R6-E
MGLP-R8-6
MGLP-R8-10
MGLP-R8-E
3/8 (12) MGLP-R12-12
Dia.
(No.) Steel
3/16 (6) MGL100-R6-6
MGL100-R6-9
1/4 (8) MGL100-R8-8
MGL100-R8-12
Aluminum
MGL100-B6-6
MGL100-B6-9
MGL100-B8-8
MGL100-B8-12
Grip
Stainless
Range
MGL100-U6-6 .125-.331
MGL100-U6-9 .305-.500
MGL100-U8-8 .160-.475
MGL100-U8-12 .415-.725
Dia.
(No.)
3/16 (6)
Truss Head
MGLT
1/4 (8)
3/16
Shear
Tensile
Pin Retention
Alum.
600
500
50
Steel
1300
1200
150
Stainless
Steel
130
950
100
MGLP-B6-7
MGLP-B6-E
MGLP-U6-7
.214-.437 .191-.201
.062-.437 .191-.201
MGLP-B8-6 MGLP-U8-6
MGLP-B8-10 MGLP-U8-10
MGLP-B8-E
MGLP-B12-12
Steel
MGLT-R6-4
MGLT-R6-E
MGLT-R8-6
3/8
Grip
Hole
Range Size
.062-.270 .191-.201
Stainless
MGLP-U6-4
.080-.375
.350-.625
.080-.625
.120-.560
.261-.272
.261-.272
.261-.272
.392-.408
100° Flush Head
Hole
Size
.191-.201
.191-.201
.261-.272
.261-.272
1/4
Typical Installed Values in
Nominal Grip (lbs.)
Aluminum
MGLP-B6-4
MGL100
Aluminum
MGLT-B6-4
MGLT-B6-E
MGLT-B8-6
Grip
Range
.062-.270
.062-.437
.080-.375
Hole
Size
.191-.201
.191-.201
.261-.272
Shear
Tensile
Pin Retention
Alum.
1300
890
100
Steel
2500
2200
300
Stainless
Steel
2350
1800
200
Shear
Tensile
Pin Retention
Alum.
2950
1900
250
Steel
5600
4000
650
Stainless
Steel
NA
NA
NA
Page 6
Duncan Bolt
HUCK® PARTS FOR TRAILERS
Brazier Head—C6LB
C
Flush Head
—C6L90
Truss Head
—C6LT
C
A
B
C
90°
ref
B
B
min. grip
Brazier Head (B)
Diameter
A
B
Truss Head (T)
C
B
Flush Head (90)
C
B
C
6 (3/16)
.195-.191
.394-.356
.125-.113
.496-.406
.088-.078
.354-.328
.085-.075
10 (5/16)
.322-.317
.656-.594
.201-.181
.797-.703
.141-.127
.589-.547
.141-.127
8 (1/4)
12 (3/8)
.259-.254
.385-.380
.525-.475
.787-.713
.152-.136
.594-.531
.248-.223
2LC
.922-.828
3LC
.115-.103
.168-.152
8LC
Collars
Collar Type:
Part Number:
Collar Diameter:
Standard
2LC-R
2LC-F
6 (3/16)
8 (1/4)
10 (5/16)
12 (3/8)
Flange
3LC-2R
3LC-F
6 (3/16)
8 (1/4)
10 (5/16)
12 (3/8)
Low Profile
8LC-2R
8LC-F
6 (3/16)
8 (1/4)
10 (5/16)
12 (3/8)
Pin Finish
Carbon Steel—None (Plain Black)
2024 Aluminum Alloy—Anodize Per MIL-A-8625 or chemical surface
treatment per MIL-C-5541 (Manufacturer’s option)
6061 Aluminum Alloy—None
Stainless Steel—None
Wide Flange
3LCW-2R6
3LCW-2R8
6 (3/16)
8 (1/4)
10 (5/16)
12 (3/8)
.473-.437
.709-.656
.115-.103
.168-.152
Pin Material
Carbon Steel (R)
2024 Aluminum Alloy (C)
6061 Aluminum Alloy (F)
Stainless Steel (U)
Collar Material
Low Carbon Steel (R) or
(2R) 5062 Aluminum Alloy
—Heat treated (F)
6061 Aluminum Alloy (I)
Stainless Steel (CU)
Collar Finish
Carbon Steel—Zinc Plated, Wax Film Lubricated
Aluminum Alloy—None, Wax Film Lubricated
Stainless Steel—None, Wax Film Lubricated
Wax Film Lubricated
Page 7
Duncan Bolt
C6L Grip Data: 3/16 and 1/4 diameter
Grip
No.
Grip
Min
3
.125
2
4
5
.313
.438
9
10
11
12
13
14
15
16
17
18
19
20
.457
.188
.375
8
.250
.188
.313
7
6 (3/16) Dia.
.063
.250
6
Range
Max
.500
.563
.625
.688
.750
.813
.875
.938
.375
D +/-1/32 E +/-1/8,-0
.394
1.404
.519
1.529
.582
.438
.644
.500
.707
.563
.769
.625
.832
.688
.894
.750
.957
.813
1.019
.875
1.082
.938
1.000
1.063
1.000 1.125
1.063 1.188
1.125 1.250
1.188 1.313
1.144
1.207
1.269
1.332
1.394
1.457
1.519
C6L Grip Data: 5/16 and 3/8 diameter
8 (1/4) Dia.
D +/-1/32 E+/-1/8,-0
1.466
.485
1.520
.610
1.645
.548
1.591
.673
1.654
.735
1.716
.798
1.779
.860
1.841
.923
1.904
.985
1.966
1.583
1.708
1.770
1.833
1.895
1.958
2.020
1.048 2.083
2.029
Grip
No.
Grip
Min
6
.250
4
8
10
12
14
16
18
20
Range
Max
.125
.375
.375
.625
.500
.625
.750
.875
.500
.750
.875
1.000
1.125
1.000 1.250
1.125 1.375
10 (5/16) Dia.
D +/-1/32 E +/-1/8,-0
.749
1.910
.999
2.160
.874
1.124
1.249
1.374
1.499
1.624
1.749
1.110 2.145
2.091
1.173 2.208
2.154
1.235 2.270
2.216
1.298 2.333
2.279
1.360 2.395
2.341
1.423 2.458
2.404
1.485 2.520
2.466
1.548 2.583
2.529
1.610 2.645
3/16
1/4
1. “Grip” is actual thickness
of material to be fastened.
2. C6L90 is not available in
grip 2 for 3/16 and 1/4
diameters and grip 4 for 3/8
diameter.
5/16
3/8
Carbon
Steel
2024
Aluminum (C)
6061
Aluminum (F)
CRES (U)
Collar:
Shear
2LC-R or 3LC-R
Clamp
1875
350
1455
3050
550
530
Shear
1025
1000
775
2LC-2CU or 3LC-2CU
1650
1050
LC-I or 3LC-I
Tensile
1725
2LC-F or 3LC-F
1375
1025
3550
Clamp
1805
950
620
Tensile
3000
1800
975
Shear
4725
2925
2125
Clamp
2810
1500
965
Tensile
4600
Shear
6825
Clamp
4020
Tensile
6500
2850
1550
4200
3050
2200
1380
4200
2400
2.285
2.410
2.535
2.660
2.785
2.910
D +/-1/32 E+/-1/8,-0
.809
.934
2.121
2.246
1.059 2.371
1.184 2.496
1.309 2.621
1.434 2.746
1.559 2.871
1.684 2.996
1.809 3.121
Pin Material & [Finish]
Notes:
Installed Values in Nominal Grip (lbs.) [minimum installed values in pounds]
Size Pin:
2.035
12 (3/8) Dia.
2000
3750
1805
5525
4250
2810
7950
6100
020
Carbon Steel
—[none (plain black)]
2024 Aluminum Alloy (C)
—[Anodize per MIL-A8625 or chemical surface
treatment per MIL-C-5541
(Manufacturer’s option)]
6061 Aluminum Alloy (F)
—[None]
CRES Steel (U)—[None]
Collar Material & [Finish]
Low Carbon Steel (R) or
(2R)—[Carbon Steel:
Zinc plated, Wax Film
Lubricated]
5062 Aluminum Alloy,
Heat treated (F) —
[Aluminum Alloy: None,
Wax Film Lubricated]
6061 Aluminum Alloy (I)
—[CRES Steel: None,
Wax Film Lubricated]
CRES Steel (CU)
—[Wax Film Lubricated]
Page 8
Duncan Bolt
HUCKTAINER® FASTENERS
Medium bearing encapsulated head HLPM(*)-R12
Standard low profile head HLPP-R12
(not encapsulated)
Wide bearing encapsulated head HLPE(*)-R12
Note: Only wide bearing sleeve HLPE ( ) and/or wide bearing
pin HLPS should be used directly against FRP. Consult for
stock status—minimums may apply.
*Add encapsulated color: W=white; G=gray; RY = Ryder
yellow; HY= Hertz yellow
Clearance Sleeve
HLPSC-R12
Grip
No.
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Grip Range
Min.
Max
.500
.625
.562
.687
.625
.750
.687
.812
.750
.875
.812
.937
.875
1.000
.937
1.062
1.000
1.125
1.062
1.187
1.125
1.250
1.187
1.312
1.250
1.375
1.312
1.437
1.375
1.500
1.437
1.562
1.500
1.625
1.562
1.687
1.625
1.750
1.687
1.812
1.750
1.875
1.812
1.937
Medium Bearing Sleeve
HLPSM-R12
A
.562
.624
.687
.749
.812
.874
.937
.999
1.062
1.124
1.187
1.249
1.312
1.374
1.437
1.499
1.562
1.625
1.687
1.750
1.812
1.875
Dimensional Data
B
C
D
2.170
**
.015
2.232
.090
.015
2.295
.090
.015
2.357
.220
.145
2.420
.220
.145
2.482
.345
.270
2.545
.345
.270
2.607
.470
.395
2.670
.470
.395
2.732
.470
.395
2.795
.470
.395
2.857
.470
.395
2.920
.470
.395
2.982
.470
.395
3.045
.470
.395
3.107
.470
.395
3.170
.470
.395
2.232
.470
.395
3.295
.470
.395
3.357
.470
.395
3.420
.470
.395
3.482
.470
.395
Clearance Sleeve
HLPS-R12
Page 9
Duncan Bolt
TRUCK FRAME FASTENERS
HP8 FASTENERS
Grip No
.
Use for Freightliner, Sterling, Navistar, Volvo (countersunk)
Overhead View
OEM
Head Marking
Grip#
Fastener
Grip(* ) Range
(Inches)
8
12
16
20
.250-.750
.500-1.000
.750-1.250
1.000-1.500
24
28
HP8F-DT16-8
HP8F-DT16-12
HP8F-DT20-8
HP8F-DT20-12
HP8F-DT24-12
HP8F-DT16-28
HP880-20-28
HP8F-DT16-32
HP8F-DT16-36
HP8F-DT20-28
HP8F-DT24-28
HP8F-DT20-36
HP8F-DT20-44
HPCF-R20U
HP8F-DT24-36
1/2" (16)
HP8F-DT16-20
HP880-20-20
1.250-1.750
1.500-2.000
32
36
44
Collar
AFTERMARKET FASTENER
1.750-2.250
2.000-2.500
2.500-3.000
HPCF-R16U
5/8" (20)
HP8F-DT20-20
3/4" (24)
HP8F-DT24-20
HPCF-R24U
*GRIP=ACTUAL THICKNESS OF MATERIAL BEING FASTENED
Grip No
.
METRIC HUCKFITS (MHFF)
Overhead View
OEM
Head Marking
Grip#
10
15
17
20
25
30
35
40
45
50
55
Collar
Use for General Motors, Mack, Kenworth, Peterbilt, Volvo
Fastener
Grip(* ) Range
(MM)
5-15
10-20
10-24
15-25
20-30
25-35
30-40
35-45
40-45
45-55
50-60
AFTERMARKET FASTENER
MHFF-DT12-10
12 MM
MHFF-DT12-20
MHFF-DT12-30
MHFF-DT12-40
MHCH-R12U
16 MM
MHFF-DT16-17
MHFF-DT16-30
MHFF-DT16-40
MHFF-DT16-50
MHCH-R16U
20 MM
MHFF-DT20-20
MHFF-DT20-30
MHFF-DT20-40
MHCH-R20U
*GRIP=ACTUAL THICKNESS OF MATERIAL BEING FASTENED
Page 10
Duncan Bolt
A properly installed
HUCKBOLT Fastener will
possess the dimensional
characteristics tabulated. Should
the "A" dimension fall below or
the "B" dimension exceed the
indicated value, the fastener is
being used out of' grip. A "C"
dimension less than the tabulated
value indicates an incorrect or
worn anvil on the nose assembly.
A "D" dimension greater than
the given values indicates an
incorrect or worn anvil on the
nose assembly.
HP8 INSPECTION DATA
HEX HEAD METRIC (MM)
ROUND HEAD INCH SERIES (")
Dia.
DT16
DT20
DT24
A (Max)
.10
.12
.12
B (Max)
.65
.67
.67
C (Max)
.56
.73
.86
METRIC HEX HEAD HUCK-FIT
INSPECTION DATA
D (Max)
.760
.945
1.132
Dia.
12 MM
16 MM
20 MM
A (Max)
.60
.60
.60
B (Max)
10.60
10.60
10.60
C (Max)
14.00
17.70
21.20
D (Max)
18.30
24.10
30.30
TRUCK FRAME KITS
HP8 and Huckfit Fastening Kits
For Sale & Rental
NOSE ASSEMBLIES
1/2"
99-5308
5/8"
99-5301
3/4"
99-5303
12MM
99-5401
16MM
99-5301
20MM
99-5403
Pictured:
Huck Model 940 POWERIG
12'
26'
118309-12
118309-26
HOSES
2624
2628
1/2" & 5/8" only
1/2" - 3/4"
TOOLS
Hydraulic Unit with 2628 tool.
Page 11
Duncan Bolt
DRILL BITS
135˚ SPLIT POINT -- HIGH SPEED STEEL
(Standard Line)
PREMIUM HIGH SPEED—"Black & Gold"
(Premium Line)
JOBBER Length
AIRCRAFT
Length 6"
STUBBYS
AIRCRAFT Length 12"
REDUCED SHANK DRILLS
Available in 1/2" 3/8" & 1/4"Shanks
Authorized Distributor for DORMER and TRIUMPH
We also carry
• COBALT BITS
• CARBIDE TIPPED BITS
• A FULL LINE OF TAPS AND DIES
• DRILL & TAP SETS
• REAMERS
Fractional 1/64 to 1"
Number sizes 1-60
Letter Sizes
Metric Sizes
Page 12
Duncan Bolt
SOLID RIVETS
Standard Brazier Head Aluminum Rivets
A
ALLOYS
1100F Soft
2117T4 Hard
6061T6
6053T4
6053T61
5056H32
B
C
D
1/8
0.312
0.062
0.227
3/16
0.467
0.094
0.339
5/32
1/4
5/16
3/8
0.390
0.625
0.780
0.937
0.078
0.125
0.156
0.187
0.283
0.454
0.566
0.680
Standard Commercial Tolerances
Standard Universal Head Aluminum Rivets
A
ALLOYS
1100F Soft
2117T4 Hard
6061T6
6053T4
6053T61
5056H32
B
C
D
1/8
0.250
0.059
0.108
3/16
0.375
0.085
0.164
5/32
1/4
5/16
3/8
0.312
0.500
0.625
0.750
0.072
0.112
0.138
0.166
0.135
0.217
0.272
0.328
Standard Round Head Aluminum Rivets
A
ALLOYS
1100F Soft
2117T4 Hard
6061T6
6053T4
6053T61
5056H32
B
C
D
1/8
0.250
0.094
0.130
3/16
0.375
0.140
0.195
0.625
0.234
5/32
1/4
5/16
3/8
0.312
0.500
0.750
0.117
0.187
0.281
0.163
0.260
0.325
0.391
Modified Brazier Head Aluminum Rivets
A
ALLOYS
1100F Soft
2117T4 Hard
6061T6
6053T4
6053T61
5056H32
B
C
D
1/8
0.235
0.047
0.171
3/16
0.390
0.078
0.283
5/32
0.312
0.063
0.227
1/4
0.468
0.094
0.339
3/8
0.781
0.156
0.566
5/16
0.625
0.125
0.454
Page 13
Duncan Bolt
SOLID RIVET SETS
Aircraft Quality
Made in USA
.410 Shank Rivet Sets for 3/16 and 1/4 Rivets
Available in the following head styles:
•Standard Brazier Head
•Modified Brazier Head
•Universal Head
•Round Brazier Head
.498 Shank Rivet Sets for 5/16 and 3/8 Rivets
Available in the following head styles:
•Standard Brazier Head
•Modified Brazier Head
•Universal Head
•Round Brazier Head
Air Hammers and Accessories
.401 and .498 Shank
Air Hammers
Punches
Chisels
Cutters
Springs
PLEASE CALL FOR MORE INFO
ON PRODUCTS AND QUANTITIES
Page 14
Duncan Bolt
BLIND RIVETS
Grip Data
DIA. GRIP NO.
3/32
1/8
32
34
36
41
.251-.375
.020-.062
.188-.250
48
410
52
.126-.187
.251-.312
.313-.375
.376-.500
.501-.625
.020-.125
53
.126-.187
56
.251-.375
54
58
.188-.250
.376-.500
510
.501-.625
63
.126-.187
62
64
L
MAX
.250
.375
.500
.212
.275
.337
.400
.462
.525
.650
.775
.300
.362
.425
.550
.675
.800
F
MAX
.350
.395
.457
.520
.645
.770
.690
.940
.825
614
.751-.875
1.075
1.235
618
1.001-1.125
1.325
1.485
84
.126-.250
82
86
.020-.125
.251-.375
1.200
.375
.500
.625
.750
88
.376-.500
812
.626-.750
1.000
.876-1.000
1.250
810
814
816
818
820
.501-.625
.751-.875
1.001-1.125
1.126-1.250
.735
.985
1.110
1.360
.555
E
D
H
W
L
F
P
*Dimensional data not pictured
Handy Rivet Guage (manufacturers rivet sizes may vary)
.680
.805
.930
1.055
1.125
1.305
1.500
P
.860
.875
1.375
W
120° Flush Head*
.547
.501-.625
.876-1.000
H
E
L
F
.815
610
616
D
.565
.610
.950
Large Flange
.502
.450
.626-.750
P
.440
.251-.375
612
L
F
.895
.188-.250
.700
W
.582
.485
.376-.500
H
D
.332
.325
.575
E
.600
.020-.125
.387
Domed Head
.475
66
68
1/4
.126-.250
44
46
3/16
.020-.125
.063-.125
45
5/32
RANGE
42
43
1.180
1.430
1.555
1.680
Page 15
Duncan Bolt
Grip-Rite SureSet™Rivet
Precision two-piece, all-metal fastener ideally suited for use in blind (one side access only) and non-blind
applications. Can be used with just about any combination of materials. Available in 3/32"-1/4" diameters and
in domed, large flange and 120° flush head styles.
Dimensional Data—Domed Head
Dia.
3/32
(No.)
5/32
(5)
.160-.164
#20
.156
.312
.040
.057
P min
.250
.032
W nom
.125
.188
E ref
#30
.094
H nom
.129-.133
#41
D nom
(4)
.097-.100
Drill
1/8
(3)
Hole Size
.050
.076
.095
1.00
1.00
3/16
1/4
(6)
.192-.196
(8)
#11
.257-.261
F
.187
.250
.375
.500
.060
.114
.080
.151
1.00
1.00
1.00
Dimensional Data—Large Flange
Dia.
1/8
(No.)
3/16
(6)
.192-.196
#11
.187
.625
.075
.076
P min
.468
.065
W nom
.156
.375
E ref
#20
.125
H nom
.160-.164
#30
D nom
(5)
.129-.133
Drill
5/32
(4)
Hole Size
.092
.095
.114
1.00
1.00
1/4
(8)
.257-.261
F
.250
.750
.107
.151
1.00
1.00
Installed Values in Nominal Grip (lbs.)—Domed Head, Large Flange (and 120° Flush Head)
Dia.
3/32
1/8
5/32
3/16
1/4
Body Material:
C Steel Plated
Aluminum
Aluminum
Stainless Steel
Stainless Steel
150
Carbon Steel
110
Aluminum
80
Stainless Steel
285
200
115
230
Carbon Steel
150
320
230
500
320
650
500
650
Mandrel Material: Carbon Steel
Shear
Tensile
210
170
Tensile
420
300
Shear
Shear
420
320
220
800
800
Shear
600
435
310
995
995
Shear
1200
850
580
Tensile
565
Tensile
850
Tensile
1475
450
725
1150
340
485
770
900
1350
1700
2200
Rivet Code Definitions
Example:
ABL6-6A
230
900
1350
1700
2200
A — First Letter .......................Rivet material (A–Aluminum; S–Steel; C–Copper; SS–Stainless Steel)
B — Second Letter .................. Style of Head (B–Buttonhead; C–Countersunk)
L — Third Letter (if any) ........ Large Flange Head
6 — First Number ................... Body Diameter in 32nd’s
6 — Second Number ............... Maximum Grip Length in 16th’s
A — Final Letter ...................... A–Aluminum Mandrel; S–Stainless Steel Mandrel; B–Brass Mandrel;
C–Copper Plated Steel Mandrel; CLD–Closed-End; MG–Multi-Grip;
QL–Q-Lok; KL–Klik-Lock. No final letter indicates steel mandrel.
Page 16
Duncan Bolt
OLYMPIC BULB-TITE RIVETS
RV6601 - Countersunk Head (82%)
RV6602 - Low Profile Head
RV6603 & 6604 - Dome Head (Protruding Crown)
RV6605 - Large Flange Head (Protruding Crown)
RV6602, 6676, 6696 - Dome Head (Recessed Crown)
RV6607 - Shaveable Brazier Head
A - Body Diameter; B - Head Height; D - Head Diameter; L - Rivet Body Length; F - Blind Side Protrusion
Steel Rivet/Steel Mandrel
Head
Style
Countersunk
Head
Recessed
Crown
Dome Head
Recessed
Crown
Rivet
Dia.
Nom.
1/4”
Gesipa
Part
Number
RV6671-8-4
RV6671-8-6
RV6671-8-8
Grip
Range
(Inches)
.150-.250
.187-.375
.250-.500
Hole Size
Drill No.
1/4”
RV6676-8-4
RV6676-8-6
RV6676-8-8
RV6676-8-10
.040-.250
.125-.375
.250-.500
.375-.625
.250-.263
1/4
D
Max.
.246
Max.
B
Max.
.147
Ref.
.250-.263
1/4
.246
Max
.116
.246
Max.
.116
Dimension (Inches)
A
L
Max.
.915
1.040
1.165
L
Max.
1.005
1.130
1.355
.535-.550
.815
.940
1.065
1.190
.535-.550
.815
.940
1.065
1.190
.477-.485
Typ. Strength (lbs.)
Shear Tensile
1250
950
1.005
1.130
1.255
1.380
1250
950
1.005
1.130
1.255
1.360
2100
1455
Monel Rivet/Stainless Steel Mandrel
Dome Head
Recessed
Crown
1/4”
RV6696-8-4
RV6696-8-6
RV6696-8-8
RV6696-8-10
.040-.250
.125-.375
.250-.500
.375-.625
.250-.263
1/4
R V66 0 4 - 6 - 8 W
Olympic Bulb-Tite
Rivet Material
0 - Aluminum
7 - Steel
9 - Monel
Washer for Weather Resistance
Maximum Grip (in 1/16”)
Nominal Diameter (in 1/32”)
Head Style:
1-Countersunk;
2-Flat Head;
3, 4 & 9-Dome Head (Protruding Crown);
5 - Large Flange Head;
6 - Dome Head (Recessed Crown);
Dome Head (Shaveable)
Rivet Head Shaver
Page 17
Duncan Bolt
Aluminum Rivet and Aluminum Mandrel
Head
Style
Countersunk
Head
Recessed
Crown
Rivet
Dia.
Nom.
3/16”
1/4”
Low Profile
Flat Head
5/32”
3/16”
1/4”
Dome Head
Protruding
Crown
5/32”
3/16”
1/4”
9/32”
Large
Flange
Prot. Crown
Low Profile
Head
Recessed
Crown
9/32”
3/16”
1/4”
Gesipa
Part
Number
RV6601-6-4
RV6601-6-6
RV6601-6-8
RV6601-6-10
RV6601-6-12
RV6601-8-4
RV6601-8-6
RV6601-8-8
RV6602-5-4
RV6602-5-6
RV6602-5-8
RV6602-6-4
RV6602-6-6
RV6602-6-8
RV6602-6-10
RV6602-6-12
RV6602-8-4
RV6602-8-6
RV6602-8-8
RV6602-8-10
RV6604-5-4
RV6604-5-8
RV6604-6-3
RV6604-6-4
RV6604-6-6
RV6604-6-8
RV6604-6-10
RV6604-6-12
RV604-8-4
RV6604-8-6
RV6604-8-8
RV6604-8-10
RV6603-9-3
RV6603-9-6
RV6603-9-10
RV6603-9-12
RV6605-9-6
RV6605-9-10
RV6605-9-12
RV6606-6-3
RV6606-6-4
RV6606-6-6
RV6606-6-8
RV6606-6-10
RV6606-6-12
RV6606-8-4
RV6606-8-6
RV6606-8-8
RV6606-8-10
Grip
Range
(Inches)
.106-.250
.187-.375
.312-.500
.437-.625
.563-.750
.150-.250
187-.375
.250-.500
.125-.250
.187-.375
.250-.500
.125-.250
.187-.375
.250-.500
.375-.625
.500-.750
.125-.250
.187-.375
.250-.500
.375-.625
.067-.250
.250-.500
.050-.187
.062-.250
.187-.375
.312-.500
.437-.625
.563-.750
.062-.250
.125-.375
.250-.500
.375-.625
.132-0187
.032-.0375
.250-.625
.375-.750
.042-.375
.250-.625
.375-.750
.050-.187
.062-.250
.187-.375
.312-.500
.437-.625
.563-.750
.040-.250
.125-.375
.250-.500
.375-.625
Hole Size
Drill No.
Dimension (Inches)
A
D
Max.
.195-.205
#4
B
Max.
.103
Ref.
.250-.263
E
.246
.147
Ref.
.452
Min.
.162-.167
#20
.161
Max.
.047
.359-.375
.209-.221
#4
.195-.205
.062
.430-.455
.250-.263
1/4”
.246
.070
.532-.542
.162-.167
#20
.209-.221
#4
.161
Max.
.195-.205
.074
.335-.350
.125
.430-.455
.250-.263
1/4 Max.
.246
.118
.555-.565
.308-.327
5/16
.295-.304
.150
.610-.620
.308-.327
5/16
.295.-304
.150
.720-.765
.209-.221
#4
.195-.205
.099
.446-.492
.250-.263
1/4
.246
Max.
.116
.535-.550
.209-.221
.340
Min.
L
Max.
.770
.895
1.020
1.145
1.250
.815
.940
1.065
.790
.852
.977
.770
.895
1.020
1.145
1.270
.795
.940
1.065
1.190
.185
.972
.707
.770
.895
1.020
1.145
1.270
.815
.940
1.065
1.190
0.863
1.110
1.360
1.485
1.110
1.360
1.485
.0707
.770
.895
1.020
1.145
1.270
.815
.940
1.065
1.190
L
Max.
.935
1.060
1.185
1.310
1.435
1.005
1.130
1.255
.862
.987
1.112
.935
1.060
1.185
1.310
1.435
1.005
1.130
1.255
1.360
.925
1.112
.844
.907
1.032
1.157
1.282
1.407
1.005
1.130
1.255
1.360
1.000
1.325
1.575
1.700
1.325
1.575
1.700
.844
.907
1.032
1.157
1.282
1.407
1.005
1.130
1.255
1.380
Typ. Strength (lbs.)
Shear Tensile
675
450
1100
675
350
225
675
450
1100
675
350
225
675
450
1100
675
1500
1100
1500
1100
675
450
1100
675
Page 18
Duncan Bolt
AVK INSERTS FOR TRUCKS
R-N SERIES
RIVET NUT
THREADED INSERT
RN
SERIES
1/4-20
5/16-18
3/8-16
1st Grip
GRIP
RANGE
BROKEN
BOX
.080-.140
.49 ea.
100/BOX
.52 ea.
$36.88
.60 ea.
$38.59
$46.72
Small
.020-.080
Long
.140-.200
.56 ea.
.125-.200
.64 ea.
$48.14
.24 ea.
$93.44
2nd Grip
Medium
1st Grip
Small
.030-.125
Long
.200-.275
.68 ea.
Medium
.115-.200
.28 ea.
3rd Grip
2nd Grip
Medium
1st Grip
Small
3rd Grip
2nd Grip
3rd Grip
Long
.030-.115
.200-.285
.32 ea.
$35.83
$50.07
$96.24
$100.00
COLD FORMING TECHNOLOGY™
HOW IT WORKS FOR YOU
The R-N Series Rivet Nuts are manufactured using state-of-the-art cold
forming technology. This provides very precise tolerances. All surfaces
of the R-N Series are FORMED, not machined. This provides excellent
quality. The internal thread of the R-N Series Rivet Nut is roll FORMED
not machined. This provides excellent thread strength.
A-L SERIES KNURLED
THREAD INSERTS
SPINWALL TECHNOLOGY ™
HOW HOLE FILL
WORKS FOR YOU
RN
SERIES
1/4-20
5/16-18
3/8-16
GRIP
RANGE
BROKEN
BOX
.165-.260
.28 ea.
100/BOX
.32 ea.
.150-.312
.36 ea.
$24.64
.48 ea.
$27.81
$34.75
.150-.312
.68 ea.
1st Grip
Small
1st Grip
Small
..027-.150
1st Grip
Small
.027-.150
2nd Grip
2nd Grip
2nd Grip
Long
Long
Long
.027-.165
.52 ea.
$19.71
$40.10
$50.12
As the A-L Series is installed, the
knurled body expands 360°
FlLLiNG THE HOLE. This feature
provides exceptional thickness
torque strength and vibration
resistance. The installation tool then
continues to install the insert forming
a backside flange even in multiple or
variable
thickness
material—
WITHOUT ADJUSTMENT.
Page 19
Duncan Bolt
AVK HAND TOOLS
AA184 EXPENDABLE TOOLS
The AA184 expendable tool is ideal for field repairs or consumer installation of AVK’s products.
INSTALLATION:
•Thread the AVK fastener onto the tool mandrel all the way up.
•Hold the tool with a box wrench and turn the mandrel with another box wrench or ratchet
wrench until the AVK fastener is installed.
AA112 HI-TORQUER®
The AA112 is ideal for prototyping or
making repairs with the A-T and A-W
Series threaded inserts. It features a
patented Quick Change thread size nose
assembly.
INSTALLATION:
•Thread insert fully onto mandrel.
•Place into hole.
•Hold grip bar while turning the “T” handle clockwise until
insert is installed.
•Turn “T” handle counter clock wise to remove from insert.
AA170 PLIER TOOL The AA170 tool is ideal for prototyping or making
repairs with the A-K, A-L, A-H, A-P and A-O Series
threaded inserts.
INSTALLATION:
• Thread AVK part onto tool • Squeeze handles
• Turn removal knob
AA510 PLUNGER
DOUBLE-ACTION LEVER TOOL
The AA510 tool features a visual stroke indicator
and a quick acting pull to remove plunger. Due to its
larger size, this tool installs the full range of AVK’s
Spinwall Technology™ Threaded Insert Product in
all materials and various steel and aluminum rivet
nuts.
INSTALLATION:
•Set the appropriate stroke per the AVK
tool instruction sheet.
•Withdraw plunger from tool.
•Hold product over tool mandrel while
pushing plunger into tool fully threading
product onto the tool mandrel.
•Place into hole in your parent material.
•Squeeze tool handles together until
product is fully collapsed.
•Pull plunger from tool unthreading
mandrel from installed product.
Pneumatic Tooling
In Stock!
Call for A
Free Brochure.
AA480 DOUBLE-ACTION
LEVER TOOL
The AA480 tool features a visual stroke indicator
and a convenient spin-off removal knob. This tool
installs the full range of AVK’s spinwall technology
product steel and aluminum and limited sizes of steel
and aluminum rivet nuts.
INSTALLATION:
•Set the appropriate stroke per the AVK
tool instruction sheet.
•Thread product fully onto tool
mandrel.
•Place into the hole in your parent
material.
•Squeeze tool handles together until
product is fully collapsed.
•Spin center knob counter-clockwise
unthreading tool mandrel frominstalled
product.
Page 20
Duncan Bolt
PRIMARY WIRE
Gauge Purple
Black Orange Green
White
Brown
10
54100
54101
54102
54103
54104
54105
12
54120
54121
54122
54123
54124
54125
14
54140
54141
54142
54143
54144
54145
16
54160
54161
54162
54163
54164
54165
18
54180
54181
54182
54183
54184
54185
Copper wire with fine stranding for flexibility. PVC insulation provides
moisture, acid and oil.
Pink
54106
54126
54146
54166
54186
abrasive
Red
Blue
Yellow
Grey
54107
54108
54109
541010
54127
54128
54129
541210
54147
54148
54149
541410
54167
54168
54169
541610
54187
54188
54189
541810
strength and resistance to gas,
Recommended Uses:
10 Gauge for generator, heater switch, air conditioner, ammeter & panel lights
12 Gauge light switches and ignition switch
14 Gauge horn button circuit, head lights, gas gauge to coil, AC power port (cig lighter)
16 Gauge header leads, gas gauge, directionals, stop signal, generator to starter
18 Gauge single, bulb, low amp circuits, clock
Wire Available in 100-ft., 500-ft. and 1000-ft. Rolls
NYLON CABLE CLAMPS
Item #
Width
CC-1/8-N-100
CC-1/8-UV-100
CC-3/16-N-100
CC-3/16-UV-100
CC-1/4-N-100
CC-1/4-UV-100
CC-5/16-N-100
CC-5/16-UV-100
CC-3/8-N-100
CC-3/8-UV-100
CC-7/16-N-100
CC-7/16-UV-100
CC-1/2-N-100
CC-1/2-UV-100
CC-5/8-N-100
CC-5/8-UV-100
CC-3/4-N-100
CC-3/4-UV-100
CC-7/8-N-100
CC-7/8-UV-100
CC-1-N-100
CC-1-UV-100
CC-1 1/4-N-100
CC-1 1/4-UV-100
CC-1 1/2-N-100
CC-1 1/2-UV-100
Appr.
Dia.
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Max.
Size
1/8"
1/8"
3/16"
3/16"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1 1/4"
1 1/4"
1 1/2"
1 1/2"
Hole
Color
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
.203"
Material
Qty.
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Dimen.
Bag
Qty.
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Carton
Qty.
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Page 21
Duncan Bolt
CABLE TIES
Weight
& Item #
50 Pound
7-50-N-100
7-50-N-1000
7-50-UV-100
7-50-UV-1000
8-50-N-100
8-50-N-1000
8-50-UV-100
8-50-UV-1000
11-50-N-100
11-50-N-1000
11-50-UV-100
11-50-UV-1000
14-50-N-100
14-50-N-1000
14-50-UV-100
14-50-UV-1000
120 Pound
15-120-N-50
15-120-N-100
15-120-UV-50
15-120-UV-100
175 Pound
8-175-N-100
8-175-UV-100
12-175-N-100
12-175-UV-100
18-175-N-50
18-175-UV-50
21-175-N-50
21-175-UV-50
24-175-N-50
24-175-UV-50
30-175-N-50
30-175-UV-50
36-175-N-50
36-175-UV-50
Length
Bundle
Diam.
Looped
Tensile
Bag
Quantity
Material
Color
7"
7"
7"
7"
8"
8"
8"
8"
11"
11"
11"
11"
14"
14"
14"
14"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
2"
2"
2"
2"
3"
3"
3"
3"
4"
4"
4"
4"
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
50 lb.
100
1000
100
1000
100
1000
100
1000
100
1000
100
1000
100
1000
100
1000
Natural
Natural
Black
Black
Natural
Natural
Black
Black
Natural
Natural
Black
Black
Natural
Natural
Black
Black
8"
8"
12"
12"
18"
18"
21"
21"
24"
24"
30"
30"
36"
36"
2"
2"
3"
3"
5"
5"
6"
6"
7"
7"
9"
9"
11"
11"
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
175 lb.
100
100
100
100
50
50
50
50
50
50
50
50
50
50
15"
15"
15"
15"
4"
4"
4"
4"
120 lb.
120 lb.
120 lb.
120 lb.
50
100
50
100
Natural
Natural
Black
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
“Adhesive and Screw Mounting Pads Available”
SPLIT LOOM (UV Black)
Item#
Diameter
A-SLNY-250-0-C
A-SLNY-375-0-C
A-SLNY-500-0-C
A-SLNY-625-0-C
A-SLNY-750-0-C
A-SLNY-1000-0-C
Inside
Diameter
.250
.375
.500
.625
.750
1.000
Outside
.280
.505
.675
.815
.950
1.100
Tolerance
Roll
+-.030
+-.030
+-.030
+-.030
+-.030
+-.030
Per
250'
250'
250'
250'
250'
250'
Page 22
Duncan Bolt
ELECTRICAL TERMINALS
Wire
Size
Stud
Size
Butted
Seam
Brazed
Seam
Vinyl
Insulated
2-PC
Nylon
22-16
6
8
10
10050
10060
10070
10060BZ*
10070BZ*
20050*
20060*
20070*
20050N
20060N
20070N
24-20
16-14
6
8
10
6
8
10
1/4
10140
10150
10160
10270
10280
10290
10234
12414
12416
12418
12420
10150BZ*
10160BZ*
10280BZ*
10290BZ*
22414
22416
22418
22420
20140*
20150*
20160*
20270*
20280*
20290*
20234*
Hooks
12-10
4
6
8
10
Wire
Size
22-16
16-14
12-10
Wire
Size
22-16
16-14
12-10
Tab
Size
.110 x .020
.187 x .020
.205 x .020
.250 x .030
.110 x .020
.187 x .020
.205 x .020
.250 x .030
.250 x .030
Butted
Seam
Tab
Size
.110 x .020
.187 x .020
.250 x .030
.110 x .020
.187 x .020
.250 x .030
.250 x .030
Butted
Seam
10176
10180
10187
10177
10181
10187
Vinyl
Insulated
20191
20192
20193
20176
20194
20195
20196
20180
20187
Vinyl
Insulated
20088
20197
20177
20089
20198
20181
20186
20140N
20150N
20160N
20270N
20280N
20290N
20234N
Wire Stud
Size
Size
22-16 10
16-14 10
12-10 10
2-PC
Nylon
20176N
3-PC
Nylon
Heat
Shrink
30050
30060
30070
40050
40060
40070
32414
32416
32418
32420
30140
30150
30160
30270
30280
30290
30234
Butted
Seam
10087
10120
10130
40140
40150
40160
40270
40280
40290
40234
Vinyl
Insulated
20087
20120
20130
3-PC
Nylon
30191
30192
Heat
Shrink
30176
30194
30195
40176
30180
30187
40180
40187
2-PC
Nylon
3-PC
Nylon
Heat
Shrink
20177N
30197
30177
40177
30198
30181
30186
40181
40186
20180N
20181N
Spades
2-PC
Nylon
20087N
20120N
20130N
3-PC
Nylon
30087
30120
30130
Heat
Shrink
40087
40120
40130
Female Disconnects
Male Disconnects
Page 23
Duncan Bolt
ELECTRICAL TERMINALS
Rings
Wire
Size
22-16
16-14
12-10
8
6
4
2
1/03/8
2/03/8
3/01/2
4/01/2
Stud
Size
6
8
10
1/4
5/16
3/8
6
8
10
1/4
5/16
3/8
6
8
10
1/4
1/4 slim
5/16
3/8
1/2
8-10
12-1/4
5/16
3/8
1/2
8-10
12-1/4
5/16
3/8
1/2
12-1/4
5/16
3/8
1/2
12-1/4
5/16
3/8
1/2
10632
1/2
3/4
7/8
10636
1/2
7/8
10639
5/8
7/8
10642
5/8
3/4
7/8
Butted
Seam
10020
10030
10040
10041
10042
10043
10086
10090
10100
10101
10102
10103
10210
10220
10230
10240
10245
10250
10260
10233
10628
10629
10630
10631
10633
10634
10635
10637
10638
10640
10641
10643
10644
10645
Brazed
Seam
10020BZ*
10030BZ*
10040BZ*
10041BZ*
10042BZ*
10086 BZ*
10090 BZ*
10100 BZ*
10101 BZ*
10102 BZ*
10210 BZ*
10220 BZ*
10230 BZ*
10240 BZ*
10245 BZ*
10250 BZ*
10260 BZ*
10610
10611
10612
10613
10614
10615
10616
10617
10618
10619
10620
10621
10622
10623
20628
20629
20630
20631
Vinyl
Insulated
20020*
20030*
20040*
20041*
20042*
20043*
20086*
20090*
20100*
20101*
20102*
20103*
20210*
20220*
20230*
20240*
20245*
20250*
20260*
20233
20610
20611
20612
20613
20614
20615
20616
20617
20618
20619
20620
20621
20622
20623
20628N
20629N
20630N
20631N
2-PC
Nylon
20020N
20030N
20040N
20041N
20042N
20043N
20086N
20090N
20100N
20101N
20102N
20103N
20210N
20220N
20230N
20240N
20245N
20250N
20260N
20233N
20610N
20611N
20612N
20613N
20614N
20615N
20616N
20617N
20618N
20619N
20620N
20621N
20622N
20623N
3-PC
Nylon
30020
30030
30040
30041
30042
30043
30086
30090
30100
30101
30102
30103
30210
30220
30230
30240
30245
30250
30260
30233
Butt
Connectors
Call for
sizes and
quantities
Heat
Shrink
40020
40030
40040
40041
40042
40043
40086
40090
40100
40101
40102
40103
40210
40220
40230
40240
40245
40250
40260
40233
40610
40611
40612
40613
40614
Page 24
Duncan Bolt
FLANGED GRADE 8 ALLOY FRAME BOLTS
COARSE THREAD
Part
No.
1406BF
1408BF
1410BF
1412BF
1416BF
1420BF
1424BF
1428BF
1432BF
1436BF
1440BF
1448BF
1456BF
3108BF
3110BF
3112BF
3114BF
3116BF
3120BF
3124BF
3128BF
3132BF
3136BF
3140BF
Part
No.
3144BF
3148BF
3156BF
3164BF
3708BF
3710BF
3712BF
3716BF
3720BF
3724BF
3728BF
3732BF
3736BF
3740BF
3744BF
3748BF
3752BF
3756BF
3764BF
4316BF
4320BF
4324BF
4328BF
4332BF
Size
1/4-20x3/8
1/4-20x1/2
1/4-20x5/8
1/4-20x3/4
1/4-20x1
1/4-20x1-1/4
1/4-20x1-1/2
1/4-20x1-3/4
1/4-20x2
1/4-20x2-1/4
1/4-20x2-1/2
1/4-20x3
1/4-20x3-1/2
5/16-18x1/2
5/16-18x5/8
5/16-18x3/4
5/16-18x7/8
5/16-18x1
5/16-18x1-1/4
5/16-18x1-1/2
5/16-18x1-3/4
5/16-18x2
5/16-18x2-1/4
5/16-18x2-1/2
Ctn.
Qty.
2000
2000
2000
2000
2000
2000
2000
1500
1000
750
500
500
400
1500
1500
1500
1300
1300
1200
1000
1000
800
800
750
Wght.
Lbs./C
1.00
1.38
1.50
1.60
1.88
2.10
2.38
2.83
3.18
3.50
4.00
4.60
5.24
2.60
2.70
2.79
3.06
3.32
3.74
4.48
5.00
5.54
6.17
6.25
Size
5/16-18x2 3/4
5/16-18x3
5/16-18x3 1/2
5/16-18x43
3/8-16x1/2
3/8-16x5/8
3/8-16x3/4
3/8-16x1
3/8-16x1-1/4
3/8-16x1-1/2
3/8-16x1-3/4
3/8-16x2
3/8-16x2-1/4
3/8-16x2-1/2
3/8-16x2-3/4
3/8-16x3
3/8-16x3-1/4
3/8-16x3-1/2
3/8-16x4
7/16-14x1
7/16-14x1-1/4
7/16-14x1-1/2
7/16-14x1-3/4
7/16-14x2
Ctn.
Qty.
700
700
500
500
1000
1000
1000
1000
900
700
700
600
500
500
450
400
300
300
250
600
500
500
500
400
Wght.
Lbs./C
6.90
7.55
8.60
9.80
3.82
4.06
4.50
5.28
5.87
6.74
7.38
8.17
9.00
9.72
10.67
11.27
12.07
12.86
14.15
7.51
8.33
9.00
10.49
11.19
• Grade 8 Alloy
Frame Bolts
• Indented Hex Flange
• Manufactured to
IFI-111 & SAE J429
specifications
• 150,000 PSI
Tensile Strength
• Steel
• Black Phosphate
& Oil
Part
No.
4336BF
4340BF
4348BF
4356BF
4364BF
5012BF
5016BF
5020BF
5024BF
5028BF
5032BF
5036BF
5040BF
5044BF
5048BF
5052BF
5056BF
5060BF
5064BF
5072BF
5080BF
6220BF
6224BF
6228BF
Part
No.
6232BF
6236BF
6240BF
6244BF
6248BF
6252BF
6256BF
6264BF
6268BF
6272BF
6280BF
6288BF
7520BF
7524BF
7528BF
7532BF
7536BF
7540BF
7544BF
7548BF
7552BF
7556BF
7564BF
7572BF
7580BF
Size
7/16-14x1-1/4
7/16-14x1-1/4
7/16-14x1-1/4
7/16-14x1-1/4
7/16-14x1-1/4
1/2-13x3/4
1/2-13x1
1/2-13x1-1/4
1/2-13x1-1/2
1/2-13x1-3/4
1/2-13x2
1/2-13x2-1/4
1/2-13x2-1/2
1/2-13x2-3/4
1/2-13x3
1/2-13x3-1/4
1/2-13x3-1/2
1/2-13x3-3/4
1/2-13x4
1/2-13x4-1/2
1/2-13x5
5/8-11x1-1/4
5/8-11x1-1/2
5/8-11x1-3/4
Ctn.
Qty.
300
300
300
200
200
500
500
400
400
350
300
250
250
250
200
200
200
175
175
125
125
250
225
200
Wght.
Lbs./C
12.58
13.50
15.65
17.20
20.00
11.10
12.51
13.00
13.32
14.50
16.17
17.74
18.88
20.64
21.51
22.90
24.11
25.47
27.00
30.20
32.95
21.30
22.75
25.00
Size
5/8-11x2
5/8-11x2-1/4
5/8-11x2-1/2
5/8-11x2-3/4
5/8-11x3
5/8-11x3-1/4
5/8-11x3-1/2
5/8-11x4
5/8-11x4-1/4
5/8-11x4-1/2
5/8-1xX5
5/8-11x5-1/2
3/4-10x1-1/4
3/4-10x1-1/2
3/4-10x1-3/4
3/4-10x2
3/4-10x2-1/4
3/4-10x2-1/2
3/4-10x2-3/4
3/4-10x3
3/4-10x3-1/4
3/4-10x3-1/2
3/4-10x4
3/4-10x4-1/2
3/4-10x5
Ctn.
Qty.
175
175
150
150
125
100
100
100
100
90
80
50
125
125
125
120
100
100
100
90
80
80
70
60
60
Wght.
Lbs./C
26.66
29.50
31.00
33.50
36.00
38.25
40.50
44.50
46.55
49.00
53.25
57.80
34.55
38.05
40.00
41.00
44.50
49.00
52.00
54.00
57.90
60.50
67.00
73.75
81.00
Duncan Bolt
Page 25
FLANGED
FLANGED FRAME BOLTS (CONT’D)
STOVER LOCK NUTS
FINE THREAD
Part
No.
3216BF
3220BF
3224BF
3232BF
3816BF
3820BF
3840BF
4416BF
5120BF
5124BF
5128BF
5132BF
5136BF
5140BF
5144BF
5148BF
5156BF
5164BF
5172BF
Ctn.
Size
Qty.
5/16-24x1
800
5/16-24x1-1/4 800
5/16-24x1-1/2 1000
5/16-24x2
500
3/8-24x1
1000
3/8-24x1-1/4
900
3/8-24x1-1/2
500
7/16-20x1
600
1/2-20x1-1/4
400
1/2-20x1-1/2
300
1/2-20x1-3/4
300
1/2-20x2
300
1/2-20x2-1/4
250
1/2-20x2-1/2
250
1/2-20x2-3/4
200
1/2-20x3
200
1/2-20x3-1/2
150
1/2-20x4
150
1/2-20x4-1/2
140
Wght.
Lbs./C
3.58
4.73
4.75
5.87
5.39
6.05
9.83
7.80
12.50
13.50
15.42
16.48
18.50
19.50
21.00
22.35
25.01
28.00
30.20
Part
No.
Size
5180BF 1/2-20x5
6324BF 5/8-18x1/2
6328BF 5/8-18x1-3/4
6332BF 5/8-18x2
6336BF 5/8-18x2-1/4
6340BF 5/8-18x2-1/2
6344BF 5/8-18x2-3/4
6348BF 5/8-18x3
6356BF 5/8-18x3-1/2
6364BF 5/8-18x4
6372BF 5/8-18x4-1/2
6380BF 5/8-18x5
7628BF 3/4-16x1-3/4
7632BF 3/4-16x2
7636BF 3/4-16x2-1/4
7640BF 3/4-16x2-1/2
7648BF 3/4-16x3
7656BF 3/4-16x3-1/2
7664BF 3/4-16x4
Ctn.
Qty.
120
200
175
170
150
140
140
125
115
100
90
75
65
60
50
50
45
40
70
Flange style for use
with Grade 8 Frame
bolts; Manufactured
to RB&W specifications 150,000 PSI
proof load; Coarse
& fine thread,
medium
carbon,
heat treated steel.
Wght.
Lbs./C
33.00
26.50
28.20
29.00
30.70
33.15
35.10
37.05
40.95
45.10
49.30
54.00
40.15
42.85
46.35
50.50
55.75
63.65
69.30
Part
No.
37NOR
38NOR
44NOR
50NOR
51NOR
62NOR
63NOR
75NOR
76NOR
Ctn.
Qty.
1600
1600
950
700
700
350
350
250
250
Size
3/8-16
3/8-24
7/16-20
1/2-13
1/2-20
5/8-11
5/8-18
3/4-10
3/4-16
Wght.
Lbs./C
23.90
23.10
39.00
55.70
53.95
108.90
107.04
177.50
179.50
BOTTOM RAIL CROSSMEMBER BOLT KIT
EACH KIT CONTAINS:
• 8 pcs. 3/8-16 x 1-1/4 Ribbed Neck Carriage
Bolts (Grade 5.1 Zinc Plated)
• 8 pcs. 3/8-16 Hardened Serrated Flange Nuts
(Zinc Plated)
• 8 pcs. 3/8 Nylon Washers
* 24 pieces per bag *
Now in Stock
Call for Quantity Discount Pricing!
BOTTOM RAIL BOLTS
BOTTOM RAIL BOLTS
Size
We Stock
Matching
Nuts!
Styles
Truss
Stainless
5/16-18 x 15/16
Torx
5/16-18 x 1
Torx
Truss
GR5 Longlife
3/8-16 x 1 7/8
Torx
Truss
GR5 Longlife
3/8-16 x 1 1/8
3/8-16 x 1 1/4*
3/8-16 x 2 1/2
*Also in Button Head.
Torx
Torx
Torx
Truss
Truss
Truss
Stainless
GR5 Longlife
GR5 Longlife
All with 1000-hour longlife coating.
Page 26
Duncan Bolt
AIR BRAKE FITTINGS FOR NYLON TUBING
TEE PIPE ON RUN
SLEEVE
460
Part O.D.
No. Tube
460-4 1/4
460-6 3/8
460-8 1/2
460-10 5/8
460-12 3/4
Qty.
10
10
10
5
5
NUT
461
Part O.D.
No. Tube
461-4 1/4
461-6 3/8
461-8 1/2
461-10 5/8
461-12 3/4
Qty.
5
10
5
5
5
462
Used with nylon tubing (SAE
J844, type 3). Meets all air brake
specifications. Special tools are not
required. Typical applications
include air brake systems, air control and guage lines.
MALE CONNECTOR
UNION
Part O.D.
No. Tube
462-4 1/4
462-6 3/8
462-8 1/2
462-10 5/8
462-12 3/4
471
Part
O.D.
Pipe Qty.
No.
Tube Thread
471-42 1/4
1/8
5
471-44 1/4
1/4
5
471-64 3/8
1/4
5
471-66 3/8
3/8
5
3/8
2
471-86 1/2
471-88 1/2
1/2
2
471-108 5/8
1/2
2
MALE ELBOW
Qty.
5
5
2
2
2
TEE PIPE ON BRANCH
472
O.D.
Pipe Qty.
Part
Tube Thread
No.
472-42 1/4
1/8
5
472-44 1/4
1/4
5
5
1/8
472-62 3/8
472-64 3/8
1/4
5
472-66 3/8
3/8
5
3/8
2
472-86 1/2
472-88 1/2
1/2
2
472-108 5/8
1/2
2
468
Part
O.D.
Pipe Qty.
No.
Tube Thread
468-42 1/4
1/8
10
468-44 1/4
1/4
10
468-46 1/4
3/8
5
468-62 3/8
1/8
10
468-64 3/8
1/4
10
468-66 3/8
3/8
5
468-68 3/8
1/2
5
468-84 1/2
1/4
5
468-86 1/2
3/8
5
468-88 1/2
1/2
5
468-812 1/2
3/4
2
468-106 5/8
3/8
2
468-108 5/8
1/2
2
468-1012 5/8
3/4
2
468-128 3/4
1/2
2
468-1212 3/4
3/4
2
469
Part
O.D.
Pipe Qty.
No.
Tube Thread
1/8
10
469-42 1/4
469-44 1/4
1/4
5
469-46 1/4
3/8
5
469-62 3/8
1/8
10
469-62L 3/8
1/8 long
5
469-64 3/8
1/4
10
469-66 3/8
3/8
5
469-68 3/8
1/2
5
469-84 1/2
1/4
2
469-86 1/2
3/8
2
469-88 1/2
1/2
2
469-106 5/8
3/8
2
2
1/2
469-108 5/8
469-1012 5/8
3/4
2
469-126 3/4
3/8
2
469-128 3/4
1/2
2
469-1212 3/4
3/4
2
Page 27
Duncan Bolt
PUSH-TO-CONNECT AIR BRAKE FITTINGS
SWIVEL MALE
BRANCH TEE
UNION
Part O.D.
No. Tube
962-4 1/4
962-6 3/8
962-8 1/2
Qty.
5
5
5
969
962
972
MALE CONNECTOR
968
Part
No.
968-42
968-44
968-46
968-62
968-64
968-66
968-68
968-84
968-86
968-88
O.D.
Pipe Qty.
Tube Thread
1/4
1/8
5
1/4
1/4
5
1/4
3/8
5
3/8
1/8
5
3/8
1/4
5
3/8
3/8
5
3/8
1/2
5
1/2
1/4
5
1/2
3/8
5
1/2
1/2
5
SWIVEL
MALE
ELBOW
Part
No.
972-1-42
972-1-44
972-1-64
972-1-66
972-1-86
O.D.
Pipe Qty.
Tube Thread
1/4
1/8
5
1/4
1/4
5
3/8
1/4
5
3/8
3/8
5
1/2
3/8
5
Part
No.
969-1-42
969-1-44
969-1-46
969-1-62
969-1-64
969-1-66
969-1-68
969-1-86
969-1-88
O.D.
Pipe Qty.
Tube Thread
1/4
1/8
5
1/4
1/4
5
1/4
3/8
5
3/8
1/8
5
3/8
1/4
5
3/8
3/8
5
3/8
1/2
5
1/2
3/8
5
1/2
1/2
5
ROLL UP
DOOR RIVETS
NYLON DRIVE RIVETS
USE TO ATTACH WALL LINERS,
SCUFF RAIL AND PLYWOOD
1/4 x 1
1/4 x 1 1/8
1/4 x 1 1/4
Nylon Body Metal Pin
1/4 x 3/4 Truss Head
1/4 x 1 Truss Head
1/4 x 1 1/2 Truss Head
1/4 x 2 Truss Head
Unitap Style
1/4 x 1
1/4 x 1 1/2
1/4 x 2
INSTALLATION TOOL
Page 28
Duncan Bolt
HOSE CLAMPS
Applications: A general purpose clamp for automobiles,
plumbing, home and garden general clamping applications,
with anti corrosive properties varying with the number of
components made from stainless steel.
#
6
8
10
12
16
20
24
28
32
36
40
44
48
52
56
60
64
72
80
88
96
104
116
Diameter Range
Min.
Max.
3/8"
7/8"
7/16"
1"
9/16"
1-1/16"
9/16"
1-1/4"
11/16"
1-1/2"
3/4"
1-3/4"
1-1/16"
2"
1-5/16"
2-1/4"
1-9/16"
2-1/2"
1-13/16" 2-3/4"
2-1/16"
3"
2-5/16"
3-1/4"
2-9/16"
3-1/2"
2-13/16" 3-3/4"
3-1/16"
4"
3-5/16"
4-1/4"
3-1/2"
4-1/2"
3"
5"
3-1/2"
5-1/2"
4"
6"
4-1/2"
6-1/2"
5"
7"
6-3/4"
7-3/4"
600 Series
Part #
600-006
600-008
600-010
600-012
600-016
600-020
600-024
600-028
600-032
600-036
600-040
600-044
600-048
600-052
600-056
600-060
600-064
600-072
600-080
600-088
600-096
600-104
611 Series
Part #
611-006
611-008
611-010
611-012
611-016
611-020
611-024
611-028
611-032
611-036
611-040
611-044
611-048
611-052
611-056
611-060
611-064
611-072
611-080
611-088
611-096
611-104
611-116
1/2" Band Clamps
600 Series
• 5/16" Hex Slotted Carbon Steel Screw
• 1/2" Wide 201 Stainless Steel Band
• Carbon Steel Housing
611 Series
• 301 Stainless Steel Housing
Mini-Series Clamps
Min.
7/32"
7/16"
5/16"
7/16"
1/2"
9/16"
11/16"
7/8"
Diameter Range
Max.
5/8"
11/16"
7/8"
1"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
Part #
325-004
325-005
325-006
325-008
325-010
325-012
325-016
325-020
325 Series
• 301 Stainless Steel Housing
Page 29
Duncan Bolt
THREAD REPAIR KITS
UNC
Thread
Size
#2-56
#3-48
#4-40
#5-40
#6-32
#8-32
#10-24
#12-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
11/16-11
3/4-10
7/8-9
1-8
1 1/8-7
1 1/4-7
1 3/8-6
1 1/2-6
Part
No.
PCS/
Kit
33520
33530
33540
33550
33560
33580
33600
33620
33040
33050
33060
33070
33080
33090
33100
33110
33120
33140
33160
33180
33200
33220
33240
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
4
Also Available in:
• Metric Coasrse/Fine
• Spark Plug Sizes
• British Threads
UNF
Thread
Size
#3-56
#4-48
#6-40
#8-36
#10-32
#12-28
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
9/16-18
5/8-18
3/4-16
7/8-14
1 - 12
1 - 14
1 1/8-12
1 1/4-12
1 3/8-12
1 1/2-12
•
•
•
•
•
Part
No.
PCS/
Kit
34530
34540
34560
34580
34600
34620
34040
34050
34060
34070
34080
34090
34100
34120
34140
34160
34160-14
34180
34200
34220
34240
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
4
Each Kit Contains:
Quality High Speed Tap
Packaged Quantity of Inserts
Intallation Tool
Instructions
Reusable Container
WIRE & TUBE CLIPS
Part
No.
Material: HD galvanized steel, chem-treated G90,
per ASTM A653/ A653M.
Cushion: black vinyl, 1/32" thick. Parts have one
rounded and one slotted hole.
Amp
70
90
125
150
175
907825 90
907835 1251
907845 150
907855 175
907865 225
907875 225
PCS/
Kit
36020
36040
36060
36080
36120
10
10
10
5
5
COPPER BATTERY LUGS
Cable
Guage
6/4
2
1
1/0
2/0
1/2-inch stud (.500)
Clearance (.525)
Amp
Part
No.
Recoil thread repair kits contain a quality HSS
tap, installation tool, precision stainless steel
inserts and instructions in a sturdy reusable
container. Recoil has a full range of problem
solving repair kits available in single or multiple
size format.
Clearance (.336)
906515
906525
906535
906545
906555
Part
No.
NPT
Thread
Size
1/8-27
1/4-18
3/8-18
1/2-14
3/4-14
Cable
Guage
2
1
1/0
2/0
3/0
4/0
Standard Bare Copper Lugs — Crimp or Solder
Part
No.
Clearance (.405)
906815
906825
906835
906845
906855
906865
906875
Amp
70
90
125
150
175
225
225
Cable
Guage
6/4
2
1
1/0
2/0
3/0
4/0
Part
No.
5/16-inch stud (.3125)
Clearance (.336)
Amp
906615 70
906625 90
906635 1251
906645 150
906655 175
906665 225
906675 225
Cable
Guage
6/4
2
1
1/0
2/0
3/0
4/0
Page 30
Duncan Bolt
ASSORTED DRIVE BITS
1/4 Hex - Phillips Insert Bits
Size Lgth
1
2
3
2
2
2
0
1
2
3
1
1
1
1-1/2
2
2-1/2
1
1
1
1-1/4
Part #
Size Lgth
Part #
100-P1
100-P2
100-P3
100-P2-4
100-P2-8
100-P2-12
102-P0
102-P1
102-P2
106-P3-2
T5
T6
T7
T8
T9
T10
T15
T20
T25
T27
T30
T40
100-T5
100-T6
100-T7
100-T8
100-T9
100-T10
100-T15
100-T20
100-T25
100-T27
100-T30
100-T40
Bit Holders - Square Drive
Female
Drive
Size
1/4
3/8
3/8
1/2
Insert
Hex
Size
1/4
1/4
5/16
5/16
1/4 Hex- Torx Insert Bits
Length
1
1-1/2
1-1/2
1-3/4
5/16 Hex - Torx Insert Bits
Part #
BH920-H16R
BH930-H16R-4
BH920-H20R-4
BH940-H20R-6
1/4 Hex - Slotted Insert Bits
Part #
.030
.034
.040
.042
.046
.050
.055
100-S30
100-S34
100-S40
100-S42
100-S46
100-S50-4
100-S55-4
1
1
1
1
1
1-1/2
1-1/2
CALL FOR INFO ON COMPLETE LINE OF DRIVE BITS
Size Lgth
Part #
T25
T27
T30
T40
T45
T50
150-T25-2
150-T27-2
150-T30-2
150-T40-2
150-T45-2
150-T50-2
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
5/16 Hex - Phillips Insert Bits
Size Lgth
Size Lgth
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
4
1-1/4
1-1/4
1-1/4
1-1/4
Part #
150-P1-2
150-P2-2
150-P3-2
150-P41-2
1/4 Hex - Square Insert Bits
Size Lgth
0
1
2
3
1
1
1
1
Part #
100-R0
100-R1
100-R2
100-R3
Page 31
Duncan Bolt
FLOORSCREWS
(Flat head, Torx, Type F)
Size (inch)
Carton
Quantity
Carton
Weight
Drive
3000
39
T-30
1/4-20 x 1
1/4-20 x 1 1/4
3000
47
T-30
2000
37
T-30
1/4-20 x 1 1/2
1/4-20 x 1 3/4
2000
45
T-30
1/4-20 x 2
1500
40
T-30
1/4-20 x 2 1/4
1400
36
T-30
1/4-20 x 2 1/2
1200
35
T-30
1/4-20 x 3
1000
33
T-30
1/4-20 x 3 1/2
800
32
T-30
1/4-20 x 4
500
23
T-30
1/4-20 x 5
500
28
T-30
1/4-20 x 6
500
32
T-30
5/16-18 x 1 3/4
1400
48
T-40
5/16-18 x 2
1200
45
T-40
5/16-18 x 2 1/2
800
38
T-40
5/16-18 x 3
600
41
T-40
5/16-18 x 4
500
45
T-40
5/16-18 x 5
300
30
T-40
5/16-18 x 6
200
24
T-40
Also available in Pan Head, Flat Head and
Phillips Head styles. Some sizes available in zinc.
Product
Sikaflex® 221 Industrial
Polyurethane Sealant
Sikaflex® 252
Knife Grade Adhesive
Trailer Exterior
Sidewalls • Roof to Roof Rail
Temperature
Range
Rate of Cure
-40ºF to 200ºF 3/16" per 24 hours
Tensile
Strength
200-300 psi
-40ºF to 200ºF 3/16" per 24 hours
450-500 psi
Used for. . .
Doors
Door Skins
Door Frames
Body Seams
Exterior frame
Trailer Interior
Lap Joints • Roof Rails
Interior Walls • Flooring
Scuff Liners • Tie-Down Rails
Colors
white, black,
gray, tan
white, black
Truck Interior
Side Panels • Headliners
Interior Fixtures • Emblems and Trim
Truck Exterior
Aero Kits • Rearview Mirrors
Glass to Cab • Fender Guard
Bedding Lamp Housing
Emblems & Trim
Reflective Light Bedding
SIKA
SIKA
CAULKING & ADHESIVES
Emblems & Trim
Lap Joints • Body Seams
Page 32
Duncan Bolt
ABRASIVE PRODUCTS
Quality Cutting & Grinding Wheels
•
•
•
•
•
•
• Premium Aluminum Oxide Abrasive Wheels
• Extra Tough Aluminum Oxide Wheels
• High Speed Cut-off Wheels
• Shatter Resistant Wheels
PREMIUM LINE
CUT OFF WHEELS
GROUNDING WHEEELS
HOLE SAWS & BURRS
WIRE WHEELS
MOUNTED POINTS
Call for more info!
M o s t Available in Coarse, Medium Coarse,
Medium Fine and Fine grades
Sizes and Quantities Vary
Precision Machined Mandrels Also Available
Standard
Flap
Wheel
NUTS
Speed Nuts
U-Nuts
Flange-Style
NYLON
Strain Relief Bushings
Snap Bushings
Hole Plugs
Screws
FASTENERS
Push-on-type
S-Clip Fasteners
NEW PRODUCTS
Half Clips
Cable, Wire, Rod &
Tube
BRASS
Air Brake Fittings
Thru-Hull Fittings
Pipe Fittings
Compression
BLACK PLASTIC
Tees
Nipples
Couplers
ELECTRICAL
Fuses
Tape
Wire
Black Pipe Fittings
Loom
Spades
Tap Connectors
T-Tap Connectors
Quick Disconnects
Wire Connectors
Three-Fourway Pin
Piggybacks
MISCELLANEOUS
Frame Mounting Clips
Keystock
Todco Door Rivets
—1/4 x 1 (in stock)
—1/4 x 1 1/8 (in stock)
Sealants
...and fine products from
Micro
Richco
Heyco
Page 33
Duncan Bolt
BOLTS
A307
-Grade A
-GradeB
Structural
-A325
-A354
-A490
Hex Head
-Grade 2
-Grade 5
-Grade 8
SquareHead
Full Thread/Tap
Lag
Carriage
Elevator
Plow
Step
Flange
Anchor
Eye Bolts
U-Bolts
Flat Slotted
NUTS
Hex
Square
Left Hand
Jam
Slotted
Castle
Coupling
Lock Nuts
All Metal
-Nylon Insert
-Keps
-FlexLoc
Grade 8
A194 Grade 2H
A194 Grade 4
A194 Grade 7
A563 Grade A
A563 Grade C
Cap
Tee
Wing
High
Eye Nuts
ANCHORS
Powers-Rawl
Red Head
MANY MORE ITEMS IN STOCK
DOMESTIC NUTS
Grade 5
Jam Nuts
H.D. Galv. Jam
A194 Grade 2H
METRIC NUTS
Castle
Left Hand
A194 Grade 2H
DRILL BITS
Galaxy
Rawl
Carbide
-SDS Plus
-Spline
-A Taper
Triumph
WASHERS
Flat
USS
SAE
A325 (F436)
-USS
-SAE
-Bevel
-Round
-Clipped
Malleable
-Bevel
-Round
O.G.
Fender
Lock Washers
-Split
-Tooth
-Alloy
Square Plate
THREADED ROD
Steel
Plain 3’ 6’ 12’
Zinc 3’ 6’ 12’
Stainless
1 8-8
316
Brass
SCREWS
Machine
Sheet Metal
Self Drill
Sems
Taptites
Thread Forming
Thread Cutting
Wood Screws
FORGED HARDWARE
Clips
Hooks
Rod Ends
Turnbuckles
RIVETS
Marson Blind
Huck Blind
Huck Structural
PINS
Cotter
Dowel
Spring
Taper
Clevis
SOCKET PRODUCTS
Button Sockets*
Square Head
Set Screws
Socket Set Screws*
Socket Cap Screws*
Stripper Bolts
Flat Sockets*
Pipe Plugs
Hex Keys
Nylock Sockets
*=Available in Torx Drive
Duncan Bolt stocks a full line of Domestic Grade 5
and Grade 8 Fasteners. Import Fasteners with full
test results are also available. We also stock a full
line of Hot Dipped Galvanized Fasteners.
SPECIAL PLATINGS
Cadmium
Galvanized
-Hot Dip
-Mechanical
BIack Oxide
Brass
Chrome
Zinc
-Blue
-Clear
-Yellow
Duncan Bolt
Page 34
FASTENER REFERENCE GUIDE
Page 35
Duncan Bolt
Threads Per Inch
COURSE
UNC
SIZE
FINE
UNC
BASIC
MAJOR
DIAM.
SIZE
COURSE
UNC
USS Washers
FINE
UNC
8
THRD
SERIES
BASIC
MAJOR
DIAM.`
APPROX
BOLT
I.D.
O.D. THICKNESS
NO. IN
SIZE (Inches) (Inches) GAUGE
100 LBS
80
.0600
1-1/8
7
12
8
1.125
3/16
1/4
9/16
18 (3/64)
36,200
1
64
72
.0730
1-1/4
7
12
8
1.250
1/4
5/16
3/4
16 (1/16)
14,900
2
56
64
.0860
1-3/8
6
12
8
1.375
5/16
3/8
7/8
14 (5/64)
9,000
3
48
56
.0990
1-1/2
6
12
8
1.500
3/8
7/16
1
14 (5/64)
6,700
4
40
48
.1120
1-5/8
5-1/2
8
1.625
7/16
1/2
1-1/4
14 (5/64)
4,100
5
40
44
.1250
1-3/4
5
8
1.750
1/2
9/16
1-3/8
12 (7/64)
2,600
6
32
40
.1380
1-7/8
5
8
1.875
9/16
5/8
1-1/2
12 (7/64)
2,200
8
32
36
.1640
2
8
2.000
5/8
11/16
1-3/4
10 (9/64)
1,300
10
24
32
.1900
2-1/4
4-1/2
8
2.250
3/4
13/16
2
9 (5/32)
910
12
24
28
.2160
2-1/2
4
8
2.500
7/8
15/16
2-1/4
8 (11/64)
650
1/4
20
28
.2500
2-3/4
4
8
2.750
1
1-1/16
2-1/2
8 (11/64)
530
1-1/8
1-1/4
2-3/4
8 (11/64)
450
5/16
18
24
.3125
3
4
8
3.000
1-1/4
1-3/8
3
8 (11/64)
380
3/8
16
24
.3750
3-1/4
4
8
3.250
1-3/8
1-1/2
3-1/4
7 (3/16)
300
7/16
14
20
.4375
3-1/2
4
8
3.500
1-1/2
1-5/8
3-1/2
7 (3/16)
260
1/2
13
20
.5000
3-3/4
4
8
3.750
1-5/8
1-3/4
3-3/4
7 (3/16)
230
9/16
12
18
.5625
4
4
8
4.000
1-3/4
1-7/8
4
7 (3/16)
200
5/8
11
18
.6250
176
3/4
10
16
.7500
7/8
9
14
.8750
1
8
14
1.000
0
4-1/2
12
12
1-7/8
2
4-1/4
7 (3/16)
2
2-1/8
4-1/2
7 (3/16)
159
2-1/4
2-3/8
4-3/4
5 (7/32)
121
104
2-1/2
2-5/8
5
4 (15/64)
2-3/4
2-7/8
5-1/4
3 (1/4)
91
3
3-1/8
5-1/2
2 (17/64)
77
ASTM and SAE Grade Markings for
SteelBolts and Screws
Grade
Marking
Specification
Material
SAE -- J429
Grade 1
ASTM -- A307
SAE J429 Grade 2
SAE -- J429
Grade 2SAE J429 Grade 8
ASTM A449 Type 1
SAE J429 Grade 5
SAE -- J429
Grade 5
Grade Identification
Headmarks
ASTM A325
Type III
ASTM A325
ASTM A490
Type III
Type III
ASTM A563
ASTM A325
Type III
Type I
Grade C3
ASTM A490
Type I
Property Class 8.8S
ASTM A325M Type I
ISO 7412
Medium Carbon Steel,
Quenched and Tempered
33,000
33,000
1/4 thru 4
...........
60,000
1/4 thru 3/4
Over 3/4 thru 1 1/2
55,000
33,000
74,000
60,000
1/4 thru 1
Over 1 thru 1 1/2
85,000
74,000
120,000
105,000
1/4 thru 1
Over 1 thru 1 1/2
Over 1 1/2 thru 3
85,000
74,000
55,000
120,000
105,000
90,000
1/2 thru 1
85,000
120,000
Weather Resistant Steel,
1 1/8 thru 1 1/2
74,000
105,000
Low Alloy Steel,
1/4 thru 2 1/2
Over 2 1/2 thru 4
80,000
75,000
105,000
100,000
Low Alloy Steel,
1/4 thru 2 1/2
Over 2 1/2 thru 4
105,000
95,000
125,000
115,000
307A
n
ASTM -- A354
Grade BC n
Medium Carbon Alloy Steel,
1/4 thru 1 1/2
120,000
150,000
n
307A
n
SAE
-- J429
Grade
8
n
SAE -- A354
Grade BD
Alloy Steel,
1/4 thru 1 1/2
130,000
150,000
n
A449 Type 1
SAE J429 Grade
2 ASTM
Grade
Identification
SAE J429 Grade 5
SAE J429 Grade 8
ntification
n
ISO 7412
ASTM -- A325
Grade 1
ASTM A449 Type 1
SAE J429 Grade 5
ASTM A490
ASTM A325
Type I
ASTM A563
Class 8.8S
III
TypeProperty
GradeASTM
DH3 A325M Type I
1/4 thru 1 1/2
ASTM A307A
Grade 2
ASTM A325
ASTM A325
Type
2I
Grade
III
Type I SAE J429 Grade
TypeIdentification
n
n
Tensile
Strength
min. psi
ASTM -- SAE
A325
J429 Grade 8
Grade 3
ASTMASTM
A449 Type 1 -- A354
SAE J429 Grade 5
SAE J429 Grade 8
Grade BB n
SAE J429 Grade 2
ASTM A325
Type III
Low or Medium
Carbon Steel
Medium Carbon Steel,
Quenched
and Tempered
ASTM -- A449
ASTM A490
Type
n I
ASTM A325
Type I
ASTM A325
Type III
ASTM A307A
Grade 2
307A
n
n
Low or Medium
Carbon Steel
Yield
Strength
min. psi
Bolt and Screw
Size, in.
ASTM A490
Type I
SAE J429 Grade 2
n Grade 2
SAE J429
Property Class 8.8S
ASTM A325M Type I
ISO 7412
ASTMnA307A
Grade 2
307A
ASTM A307A
Grade 2
n
n
Property Class 8.8S
ASTM A325M Type I
ISO 7412
ASTM -- A490
SAE J429 Grade 8
ASTM A449 Type 1
SAE J429 Grade 5
A193
Grade B7
ASTM A449 Type 1
SAE J429 Grade 5
ASTM A307A
Grade 2
307A
n
SAE J429 Grade 8
ASTM A307A
n
Grade 2
Alloy Steel,
1/2 thru 1 1/2
120,000
150,000
ChromiumMolybdenum Steel,
2 1/2 and under
Over 2 1/2 to 4 incl.
Over 4 to 7 incl.
105,000
95,000
75,000
125,000
115,000
100,000
ChromiumMolybdenum
Vanadium Steel,
2 1/2 and under
Over 2 1/2 to 4 incl.
Over 4 to 7 incl.
105,000
95,000
85,000
125,000
110,000
100,000
SAE Washers
BOLT
SIZE
I.D.
O.D. THICKNESS
(Inches) (Inches) GAUGE
6 (1/8)
5/32
3/8
18 (3/64)
79,000
8 (5/32)
3/16
7/16
18 (3/64)
58,500
10 (3/16) 7/32
1/2
18 (3/64)
43,500
12 (7/32) 1/4
9/16
18 (3/64)
36,200
9/32
5/8
16 (1/16)
22,200
1/4
5/16
11/32 11/16
16 (1/16)
19,200
3/8
13/32 13/16
16 (1/16)
14,000
7/16
15/32 59/64
16 (1/16)
10,500
1/2
17/32 1-1/16 13 (3/32)
5,500
9/16
19/32 1-3/16 13 (3/32)
4,300
5/8
21/32 1-5/16 13 (3/32)
3,600
3/4
13/16 1-1/2
10 (9/64)
2,100
7/8
15/16 1-3/4
10 (9/64)
1,600
1
1-1/16
10 (9/64)
1,200
1-1/8
1-3/16 2-1/4
10 (9/64)
920
1-1/4
1-5/16 2-1/2
9 (5/32)
630
1-3/8
1-7/16 2-3/4
9 (5/32)
525
1-1/2
1-9/16
9 (5/32)
425
2
3
n
n
A193
Grade B16
n
307A
n
n
APPROX
NO. IN
100 LBS
Page 36
Duncan Bolt
PNEUDRAULIC TOOLING
FASTENER SIZE NOSE
Huck Model 202
C6L
MAGNAGRIP
Huck Model 212
MAGNALOK
COMMENTS
3/16
1/4
3/8
99-3003
99-3006
99-100
2025
2025
255, 256
Production Nose
Production Nose
Production Nose
3/16
3/16
3/16
1/4
1/4
1/4
3/8
included
99-3303
99-3300
99-3301
99-3305
99-3487-68
99-3318
2015
202, 2022
2022, 2025
2022, 2025
2025
2022, 2025
246, 256
High volume 3/16
Heavy Duty 3/16
Economy
Economy
Heavy Duty 1/4
Repair-1 nose fits 3/16 & 1/4
3/16
3/16
1/4
1/4
3/8
3/8
HUCKTAINER 3/8
Huck Model 2025
TOOL
99-3201
99-3206
99-3204
99-3207
99-1440
99-1450
99-3464
Huck Model 2015
2022, 2025
246, 256
2025
255, 256
246, 256
256
Production Nose
Production Nose
Production Nose
Production Nose
Production Nose
Extra Heavy Nose
2025
Huck Model 255
Huck Model 256
We Repair Huck®, Cherry®, Avdel®,
Pop®, Marson® & Gesipa® Brand Tools

Duncan Bolt

Transcription

Similar documents

Table 3 – Suggested Torque Values and Clamp

browning diameter pin shear

Huck Catalog

Magna-Grip technical brochure

blind rivets - Rivets In Stock

hand pallet truck

AVK Industrial Products Catalog (PDF 1930KB)

2011 Byler Rivet Catalog

the PDF version of our Huck guns and tools catalog

Catalog 2014_3_PMS285.indd

combined draft seniority list of inspectors—as on 01/04/2013

MIL-STD-1759

PVC Schedule 80 Pipe and Fittings PVC Schedule

Establishment and use of High Nature Value Farmland

The Black Business Directory

Magna-Lok - Fastener Data

Frames - Canadian Engravers Supply Co.