Post transformare in anvelopa de beton

group
www.energobit.com
Set up in 1990, EnergoBit is today a group of companies
specialized in designing, manufacturing and distributing a
wide range of electric equipment.
Since 1994, the group’s main activity has been
oriented towards production. We presently produce
concrete transformer substations, electric panels
for distribution and industrial automation, automatic
capacitor banks, heat shrink jointings, electric meters and
outdoor lighting fixtures.
Our priority has been and will always be the group’s
development by investments and technological
improvement as well as by the professional
instruction of the personnel. EnergoBit is the result
of a development strategy. Thus, starting with 2001,
EnergoBit has begun the production of SM6
medium voltage electric cells, under Schneider Electric
license, based on a modern technological line.
2001 was also the year of confirmation of the
leadership position on prefabricated transformer
substations market.
We are convinced that, by producing this modern,
reliable and modular equipment, we are offering
new performing solutions to designers, installers
and final customers.
3/7
Prefabricated transformer substation
160 RA ROBUST
160 RB ROBUST
630 I ROBUST
630 E ROBUST
1000 ROBUST
2x630 ROBUST
Optional ROBUST
8/10
SM6 Modular Unit
IM line cell
QM transformer cell
GBC-B measurement unit
MV distribution panel
11/12 Electric distribution panel
Distribution panel up to 630 A
Distribution panel up to 3200 A
Network distribution panel with
automated switch
13
DOMINO cabinet
Street distribution cabinet
HRC fuse switch disconnector
14/15 Automatic Transfer Switch (ATS)
Panel for 100-3200A ATS
Panel for atypical ATS
16/18 Automation panel
Electric panel with invertors for modernizing
the traveling bridge crane’s drive
Electric panel with invertors for cable
traction installations
Protection and control panel using relays
for HV electric substations
Electric panel for motor drives - MCC
19
LV capacitor bank
!
Taking into account the continuous improving of the products, EnergoBit takes the right to change data in this catalogue,
without previous notice.
1
EnergoBit
Production Unit
2
160 RA ROBUST
Length:
Width:
Height:
192 cm
162 cm
180 cm
Derivation network
Maximum power of the transformer: 250 kVA
Low voltage panel with maximum 4 outputs
Activating the equipment is made from outside
Energy measurement is made on the low voltage
Optional:
SCADA system
side
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
160 RB ROBUST
Length:
Width:
Height:
192 cm
192 cm
180 cm
Loop network
Maximum power of the transformer: 250 kVA
Low voltage panel with maximum 4 outputs
Activating the equipment is made from outside
Energy measurement is made on the low voltage
Optional:
SCADA system
side
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
* Measurement of electric energy is made by meters and current transformers approved by Metrological Institutes
** Please do not hesitate to contact us for any other transformer substations configuration
3
630 I ROBUST
Length:
Width:
Height:
421 cm
214 cm
230 cm
Derivation or loop network
Maximum power of the transformer: 800 kVA
Low voltage panel with maximum 16 outputs
Activating the equipment is made from inside
Energy measurement is made on the low or
medium voltage side
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
Optional:
SCADA system
630 E ROBUST
Length:
Width:
Height:
294 cm
214 cm
230 cm
Derivation or loop network
Maximum power of the transformer: 800 kVA
Low voltage panel with maximum 16 outputs
Activating the equipment is made from outside
Energy measurement is made on the low or
medium voltage side
Optional:
SCADA system
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
* Measurement of electric energy is made by meters and current transformers approved by Metrological Institutes
** Please do not hesitate to contact us for any other transformer substations configuration
4
1000 ROBUST
Length:
Width:
Height:
421 cm
294 cm
230 cm
Derivation or loop network
Maximum power of the transformer: 1000 kVA
Low voltage panel with maximum 16 outputs
Activating the equipment is made from inside
Energy measurement is made on the low or
medium voltage side
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
Optional:
SCADA system
2×630 ROBUST
Length:
Width:
Height:
421 cm
294 cm
230 cm
Derivation or loop network
Maximum power of the transformer: 2×630 kVA
Low voltage panel with maximum
2×12 outputs + coupling
Activating the equipment is made from inside
Energy measurement is made on the low or
medium voltage side
Optional:
SCADA system
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
* Measurement of electric energy is made by meters and current transformers approved by Metrological Institutes
** Please do not hesitate to contact us for any other transformer substations configuration
5
OPTIONAL ROBUST
Length:
Width:
Height:
635 cm
294 cm
230 cm
Made up of two cabins:
630 ROBUST and 1000 ROBUST
Derivation or loop network
Maximum power of the transformer: 2×1000 kVA
Low voltage panel with maximum
2×12 outputs + coupling
Activating the equipment is made from inside
Energy measurement is made on the low or
medium voltage side
Protection degree: IP 43
Casing class: 10 K
12,5 kA; 0,5 s internal arch test
Optional:
SCADA system
* Measurement of electric energy is made by meters and current transformers approved by Metrological Institutes
** Please do not hesitate to contact us for any other transformer substations configuration
6
Whenever you have products made by
EnergoBit, they will be acompanied by a
package of services in order to simplify
your choice, installing and use.
A specialized team of engineers is
permanently at your service for:
Technical consultancy for choosing the best
solution
Designing assistance
Transportation to installation site
Technical assistance for installing and
commisioning the transformers or MV
panels operation
Detailed technical documentation for operation
and maintenance
Post warrantee service
7
SM6 MODULAR UNIT
SM6 cells with SF6 assembled in Romania
by EnergoBit under the licence of
Schneider Electric France
interrupteur sectionneur
Un
Ith
In
line cell with load swich disconnector
transformer cell with swich disconnector
mixed with fuses
GBC-B measurement unit
24kV
12,5kA
400A - 50/60Hz
IM
Uw
125kV
IMA 31,5KA
HN 64 S 41-IEC 298
interrupteur sectionneur
Un
Ith
In
24kV
12,5kA
400A - 50/60Hz
IM
Uw
125kV
IMA 31,5KA
HN 64 S 41-IEC 298
combin interrupteur fusibles
Un
Ith
In
24kV
12,5kA
200A - 50/60Hz
QM
Uw
125kV
IMA 31,5KA
HN 64 S 41-IEC 298
IM
QM
92 16 001 L
92 16 008 L
FUSIBLE MERLIN GERIN
TYPE
SOLE FUSE
IN
63A
PERCUTEUR MOYEN
IEC
420
9221107L
Functional rooms:
1. MV bars system
2. load separator
3. operation mechanism
4. low voltage room
5. medium voltage connection room
!
According to the demands, EnergoBit may
offer any configuration of the medium voltage
panel.
SM6 IM LINE CELL
IM Line cell with load separator
Length:
Depth:
Height:
375 or 500 mm
940 mm
1600 mm
Main characteristics:
UN = 24kV
IN = 630 A
Iscc = 16 kA
Voltage signalizing lamps
Optional equipment
Heating resistors
Engine for operating mechanism
Signalisation relay for mono and polyphased faults
Auxiliary contacts
Inter-blockings
8
QM TRANSFORMER SM6 CELL
QM transformer cell with swich disconnector
with fuses
Width:
Depth:
Height:
375 or 625 mm
940 mm
1600 mm
Main characteristics:
UN = 24 kV
IN = 630 A
Iscc = 16 kA
Voltage signalizing lamps
Trip coil
Medium voltage fuses
Optional equipment
Heating resistors
Engine for operating mechanism
Auxiliary contacts
Inter-blockings
GBC-B MEASUREMENT SM6 UNIT
GBC-B measurement unit
Width:
Depth:
Height:
750 mm
1020 mm
1600 mm
Main characteristics:
UN = 24 kV
IN = 630 A
Iscc = 16 kA
2 voltage transformers (connected phase to phase)
or 3 voltage transformers (connected phase to
protective earth)
2 or 3 current transformers
Optional equipment
Heating resistors
!
Current and voltage transformers have Metrological Institutes approval
9
MEDIUM VOLTAGE DISTRIBUTION PANEL
Realized with SM6 modular units, in a wide
range of configurations, these panels meet any
technical requirements in supply substations
or regular substations.
IM
Line cell with switch disconnector
and earthing switch
NSM
ATS cell realized with switch
disconnector and earthing switch
GBC-B
Measurement cell
QM
Cell with switch disconnector combined
with fuses for transformer’s protection
and earthing switch
DM1
Cell with switch disconnector and
circuit breaker for transformer’s
protection and earthing switch
IMB+GBM Coupling cell
10
Main characteristics:
UN = 24 kV
IN = 630 A
Iscc = 16 kA
Voltage signalizing lamps
Trip coil
Medium voltage fuses
Optional equipment
Heating resistors
Motor for operating mechanism
Auxiliary contacts
Inter-blockings
SM6 panels advantages:
Solutions for public and industrial distribution
of utilities in high voltage substations
Possibility of future extensions
Easy installation
Easy and safe to operate
Reduced maintenance
DISTRIBUTION PANEL UP TO 630 A
Applications:
Electricity supply for commercial buildings,
banks, offices, flats and industrial plants.
Plastic panels
Flush or surface mounting board
White RAL 9001
Protection degree IP40
Nominal current ≤ 100 A
Distribution panels ≤ 630 A
Made of stainless steel plate
Beige color
Protection degree IP 40 up to IP 50
They can be combined by association
Nominal current ≤ 630 A
Insulation voltage 1000 V
Admissible current peak: 53 kA
Frequency 50/60 Hz
DISTRIBUTION PANEL UP TO 3200 A
Made of stainless steel plate
Beige color
Protection degree IP20, 30, 31, 54
Association in width or depth
Insulation voltage 1000 V
Rated current ≤ 3200 A
Admissible current peak: 187 kA
Frequency 50/60 Hz
11
NETWORK DISTRIBUTION PANEL
WITH AUTOMATED SWITCH
Applications:
In electric energy distribution networks
Characteristics:
Made of stainless steel sheet
Beige color
Protection degree IP20
Input: automated switches ≤ 3200 A
fixed or outdrawable, load separators,
fuse separators
Outputs: vertical fuse separators gr. 00,2,3
Measurement group (current transformer, chain of
measurement clamps, meters)
Constructive alternatives:
Optional:
Automated back-up source transfer
* Please do not hesitate to contact us for any other configuration
12
DISTRIBUTION CABINET - DOMINO RANGE
Applications:
Electric energy supply for urban consumers.
Cable box with metering for houses
Electric distribution for street lighting
Characteristics:
Made of polyester with fiber glass FG 833.5,
according to DIN16 913
Lightgrey color, code RAL 7035
Protection degree IP43 or IP44, on request
Folding handle, buried, with key or triangular lock
Doors opening up to 180°
With/without sockets
Components:
Cabinets
Pedestal
System of capsulated bars
Modular fuse strips HRC with or without separator
Electric energy measurement group (optional)
Mono or tri-phased plugs (optional)
*Fuse strips size 2 takes 2 × 50 mm modules
**Fuse strips size 00 takes 1 × 50 mm module
***Please do not hesitate to contact us for any other configuration
HRC FUSE SWITCH DISCONNECTOR
WITH GEYER COMPONENTS
Characteristics:
3-pole
Body made of reinforced polyester
Non-tracking and leakage current approved
Silver plated contacts
Cover for protection and handling of the tubular
fuses
13
AUTOMATIC TRANSFER SWITCH
TRANSFER PANELS FOR ATS 100-3200 A
Essential element for the continuity of electricity
supply
It makes the transfer from the networks main
supply to a backup source, that can be either
another network or a generating set.
Applications:
In installations with continuous flow
In hospitals or public institutions of national interest
where the continuity in functioning is essential
In areas where there are problems with the
electricity supply
Construction:
With two or three switches, fixed or withdrawable,
equipped with:
- Motor mechanism
- Protection for overload and short circuit
- Auxiliary contacts
Automation block
Electrical and mechanic interlocking
Downstream connection accessories
Characteristics:
It is reversible, it insures passing from the main
source to the secondary in an adjustable time
between 0,1–30 s
It insures protection for short circuit and overload
of downstream circuits
It does not allow the concomitant closing of
equipment even in transitory regime
Possibility of selecting the manual or automated
operation
Indicates the status of switches
In case of short circuit tripping, manual restart
is required
Installation:
Vertical or horizontal
On mounting plate
Metallic structure
In metallic panel
14
AUTOMATIC TRANSFER SWITCH
PANELS WITH ATYPICAL ATS
Atypical systems of ATS
Solutions used in accomplishing a high continuity in
electric energy supply
A very wide range with 2-4 lines of supply, coupling
and generating sets
Modernization of existing installations or supply of
complete electrical panels equipped with high
performance switches up to 3200 A, fixed or
withdrawable
The control of ATS atypical configurations is realized
with programmable logic controller and
alphanumeric display for setting of parameters and
system diagnosis.
Using the programmed logic offers a wide range of
possibilities regarding the operation demands of the
system, according to specific requirements
The control components can be installed in our own
panel or on the structure of an existing installation;
for example: improving part of existing substations.
ATS configuration with programmable logic
controller connected with alphanumeric display.
15
ELECTRIC PANEL
WITH INVERTORS FOR MODERNIZING THE TRAVELLING BRIDGE CRANE’S DRIVE
Electric panel with invertors and programmable
logic controller for improving indoor or outdoor
traveling bridge cranes with drive for each level
control unit
Advantages:
Reduction (15… 30%) of power consumption
comparing to the classical drives
Keeping engine torque on the entire speed range
controlled
High mechanic reliability by eliminating the
mechanical shocks, specific to classic drives
Increasing engines’ life-time by an efficient
protection and frequency drives
Eliminates current shocks at engine starting
Characteristics:
traveling bridge crane’s capacities: 3 t – 150 t
control possibilities:
- With control units from earth level, by radio or
infrared remote control
- From the traveling bridge crane's cabin
- Mixed
EnergoBit insures a complete package
of services for upgrading traveling
bridge cranes:
analysis of constructive solutions
design
approval according to ISCIR technical prescriptions
technical assistance and/or installation
Electric panel with inverters and programmable
logic controller for upgrading 12,5 TF traveling
bridge crane’s drive:
Dimensions: H=1400, L=1600, D=400
Power rating: ~50 kW
16
ELECTRIC PANEL
WITH INVERTORS FOR CABLE TRACTION INSTALLATIONS
Electric panel with invertors for cable traction
Used for upgrading tele skiing, tele-gondolas,
tele-cabin, telphers electrical instalations with rated
power between 10 and 630 kW.
Advantages:
High safety in use.
Reduction (15…30%) of power consumption
comparing to the classic drives
Maintaining engine torque on the entire controlled
speed range high mechanic reliability by eliminating
the mechanical shocks, specific to classic drives
Increasing engines life-time by an efficient
protection and frequency drive
Eliminates current shocks when starting the
engines.
Operating panel for tele skiing
Dimensions: H=1400, L=800, D=400
Power rating: ~50 kW
Power of main invertor drive: 37 kW
Engines power: 33 kW
Measurement and digital display of operating
parameters
PROTECTION AND CONTROL PANEL
USING RELAYS FOR HV ELECTRIC SUBSTATIONS
Used in electric substations
In open or closed panels
System 19” rack
Door opening up to 150°
Compact and reliable
17
ELECTRIC PANEL
FOR MOTOR DRIVES – MCC
Used in food and light industry: plants for
food products, beer, wine-alcohol, confections,
textile, cement, oxygen etc.
Made with last generation components in a very
wide range that includes classical solutions
(D.O.L., star-delta) or high performance electronic
equipment (soft starters, inverters, d.c. converters)
Typical panel dimensions 2000×800×400 mm
Protection degree IP55 or IP54
Forced ventilation
Possibility of associating more panels in order to
realize complex MCC
Power rating: ~100 KW
The number of circuits in a MCC is in accordance
with the number of motor drives and their rastings
Classic control system or with programmable
logic controller.
MCC for technological line of food products
dimensions: H=2000, L=1600, D=400
18
LOW VOLTAGE CAPACITOR BANK
Fixed capacitor banks
For constant reactive energy compensation
400-690 V voltages
5-100 kVAr powers
Modular capacitors - constructive variants for
normal or polluted networks
Capacitors
Dielectric dry
Plastic case with double electric
insulation and overpressure disconnect device
Technology with self healing polypropylene film
HQ system - special internal protection made
of fuses and suppressor diaphragm
Automated capacitor banks
For reactive energy automated compensation
400-690 V voltages
10-720 kVA powers
Made with reliable components of last generation
technology
In very polluted networks, the banks are equipped
with antiharmonic coils
Discharge resistor included
Constructive versions for normal or polluted
networks
Contactors
Contactors block with advanced closing, with
rezistors at switching for increasing life time
300 000 operation cycles at 400 V
Varmetric controller
Regulation steps: 4, 6 or 12
Easy to operate
Automated search of c/k report
(sensitivity 0… 1,99)
Installation error signalizing
Cos ϕ display, alarms, control
EnergoBit insures a complete complementary pack of services that facilitates the choice
and installation of capacitor banks:
-analysis and network measurements
-design and dimensioning of the capacitor bank in order to get the best price/quality ratio
-technical assistance and setup of the regulator parameters at installation
19
CHAIN STORES
BILLA Chain Stores
Bra ov
ORIZONT GALERIES 3000 Braºov
DONALY Constan
Constanþa
INTEREX Ploie
Ploieºtiti
PRISMA Bucure
Bucureºtiti
PUBLIC INSTITUTIONS
Cluj-Napoca Airport
BABE -BOLYAI University Campus, Cluj-Napoca
BABEª-BOLYAI
OCTAVIAN GOGA County Library, Cluj-Napoca
Heart Institute Cluj-Napoca
POWER TRANSPORTATION AND DISTRIBUTION
S laj Substation
Transelectrica 220/110/20 kV Sãlaj
Transelectrica 400/110/10 kV Cluj Est Substation
Transelectrica 220/110/20 kV Flore
Floreºtiti Substation
lin Substation
Transelectrica 400 kV G
Gãdãlin
Electrica 110 kV Corunca Substation
Arge Vidraru Power Plant
Hidroelectrica Curtea de Argeº
OTHERS
ANA Hotels
Poiana Braºov
Bra ov cable transportation installation
VILA RIMINI Cluj Napoca
ORANGE headquarters Cluj Napoca
PORTAL TV headquarters Cluj Napoca
ROMTELECOM headquarters Satu-Mare
ROMTELECOM headquarters Sovata
ROMTELECOM headquarters Petroºani
Petro ani
ROMTELECOM headquarters Hunedoara
MEDIA CENTER Bucure
Bucureºtiti
FUEL STATIONS NETWORKS
PETROM
SHELL
MOL
OMV
BANKS
BNR
BCR
BRD - Societe Generale
BANC POST
ÞIRIAC
IRIAC BANK
INDUSTRY
AUTOMOBILE DACIA PITE
PITEªTI
TI – Grup Renault car factory
MICHELIN – tire factory Zal
Zalãu
TRANSILVANIA GENERAL Oradea
– alcohol plant Sudrigiu
– ketchup plant
– oil plant
– jam plant
– margarine plant
– beer plant Drãgãne
Drãgãneºti
Dr neºtiti
Concrete stations network HOLCIM
DR. OETKER – food stuffs Curtea de Arge
Argeº
IKEA VL
VLÃDEASA
DEASA – furniture plant Huedin
STOEHR ROMANIA – wool philature ªimleul
imleul Silvaniei
HELCOR – drugs plant Baia-Mare
REKORD ROM
ROMÂNIA
NIA – footware plant Alba-Iulia
OZTASAR – confection plant Pite
Piteºtiti
PALPLAST – polyetylen bars plant Sibiu
SALINA OCNA DEJ
FIROC – Furniture factory Satu Mare
Cluj-Napoca
400633 Str. Luncii nr. 5A
tel: +40 264 207 500 fax: +40 264 207 555
email: [email protected]
Bucureºti
062204 Bulevardul Preciziei nr. 20
tel: +40 21 493 41 08 fax: +40 21 221 13 17
email: [email protected]
Bacãu
600066 Str. 9 Mai nr. 35
tel: +40 234 122 420 fax: +40 234 122 430
email: [email protected]
Braºov
500223 Str. Toamnei nr. 18 ap. 1 bl. 2 sc. A
tel: +40 268 310 941 fax: +40 268 321 886
email: [email protected]
Constanþa
900693 B-dul Ferdinand nr. 49 ap. 44
email: [email protected]
Jibou
455200 Str. Amurgului nr. 1
tel: +40 260 642 438 fax: +40 260 642 485
email: [email protected]
www.energobit.com