Versico Roofing Systems
Transcription
Versico Roofing Systems
V E R S I C O R O O F I N G S Y S T ™ Prefabr icated Metal Edge Roof Products E M S A S I N G L E S O U R C E F O R VERSITRIM VERSICO ROOF EDGE SYSTEM BENEFITS • The full roof system is covered under one warranty, providing a single source for all warranty issues. • Products are designed so that the Versico membrane is never penetrated below the water line. • Versico products are Factory Mutual approved and have also been independently tested according to the ANSI/SPRI ES-1 Wind Design Guide. • Arrives at the job site with all fasteners, splice plates and drivers included (sealant by others). • Versico fascia products do not require stripping in of the field sheet, which prevents seams, possible delamination and potential leaks. • VersiTrim 2000 Standard Fascia ships next day when an Express Color is selected. See a customer service representative for the Express Lead Times available on our other systems. For specifications, CAD drawings and more product information, visit us at www.metalera.com/versico VERSITRIM 2000 FASCIA STANDARD EXTENDED • Strong extruded aluminum • Larger face heights. • Heavier gauges. • Eliminates the need for fascia bar with snap-on cover. • Installs to the outside edge of • • • the building with no water line membrane penetrations. Eliminates stripping in of the metal edge. Provides faster installation times and labor savings. Fully Adhered & Mechanically Attached (version shown). Ballasted version also available. extenders saving substantial time and labor costs. Gauges g Available .040" Aluminum 24-gauge g g Steel Gauges g Available Inquire for other material specs Colors Available 30 ppre-finished colors .050" and .063" Aluminum Inquire q for other material specs p Colors Available 30 ppre-finished colors Custom colors available Components p Included Custom colors available Components p Included Extruded bar, 20-gauge g g cleat, bar splice, p cover and fasteners Extruded bar, bar splice, p cover, and fasteners Sizes Available Sizes Available 8.5", 10", 11.5" & 13" faces 4", 5.5", 7" & 8.5" faces Warranties Available Warranties Available Included in Full System Roof Warranty Wind Warrantyy y ppre-finished Kynar y warrantyy 20-year, 10-year standard; upp to 20 yyears for custom ppost-finish 155 mph p Included in Full System Roof Warranty Wind Warrantyy 20-year, y pre-finished p Kynar y warrantyy 10-year standard; upp to 20 yyears for custom post-finish p 155 mph p VERSITRIM 2000 EXTENDED CANTED FASCIA • Allows for the use of .050" • • and .063" aluminum fascia covers while keeping the flange out of the waterline. Pre-punched, slotted fastening holes, a non-penetrating cover attachment. Larger face heights that eliminate the need for fascia extenders. Gauges g Available .050" and .063” Aluminum Inquire q for other material specs p Colors Available 30 ppre-finished colors Custom colors available Components p Included Extruded bar, 20-gauge g g cleat, bar splice, p cover and fasteners Sizes Available 8.5", 10", 11.5" & 13" faces Warranties Available Included in Full System Roof Warranty Wind Warrantyy 20-year, y pre-finished p Kynar y warrantyy 10-year standard; y for custom post-finish p upp to 20 years 155 mph p S I N G L E - P L Y R O O F I N G SYSTEM ACCESSORIES VERSITRIM 2000 HG FASCIA VERSITRIM SYSTEM 200 FASCIA • Strong extruded • Versatile 24-gauge • • aluminum bar with snap-on cover. Provides quick and easy installation. Designed to allow fascia in smaller face heights to use heaviergauge covers. • • galvanized waterdam with crimp-on fascia cover. Concealed fasteners and splice plates. Easy to install system without any penetrations of the membrane at the waterline. Gauges g Available .050" and .063" Aluminum Gauges g Available Inquire q for other material specs p Colors Available 30 ppre-finished colors .040", .050" and .063" Aluminum 22- and 24-gauge g g steel Components p Included Inquire for other material specs Colors Available Custom colors available 30 ppre-finished colors Custom colors available Extruded bar, bar splice, p cover and fasteners Components p Included Sizes Available 24-gauge g g waterdam, cover, concealed splice p plate p and fasteners 4", 5.5" & 7" faces Sizes Available Warranties Available 5", 6.5", 8", 9 .5", 11", 12.5" Included in Full System Roof Warranty Wind Warrantyy 20-year, y pre-finished p Kynar y warrantyy 10-year standard; upp to 20 years y for custom post-finish p 155 mph p Warranties Available Included in Full System Roof Warranty Wind Warrantyy 20-year, y pre-finished p Kynar y warrantyy 10-year standard; upp to 20 yyears for custom post-finish p 110 mph p VERSITRIM 1000 FASCIA VERSITRIM 200 COPING • Heavy formed • Full snap-on • • • aluminum base rail with snap-on cover. Installs to the outside edge of the building with no water line membrane penetrations. Eliminates stripping in of the metal edge, providing faster installation times and labor savings. Available for Fully Adhered and Mechanically Attached Systems (shown) Ballasted version also available. design for attachment to either wood nailers or atop masonry walls. • Utilizes 12" wide anchor clips with stainless steel springs to ensure longterm, positive attachment. • Concealed coping splice plates have dual non-curing sealant strips on each side of the joint for added protection against water entry. • Custom fabricated in sizes to meet exact job requirements. Gauges g Available .040" Aluminum 24-gauge g g Steel Gauges g Available Inquire for other material specs .040", .050" and .063" Aluminum 22- and 24-gauge g g steel Colors Available 30 ppre-finished colors Inquire for other material specs Colors Available Custom colors available 30 ppre-finished colors Custom colors available Components p Included Components p Included .050" Aluminum formed rail, bar splice, p cover and fasteners 20-gauge anchor clips w/stainless steel spring, cover, concealed splice plates w/non-curingg butyl y sealant strips p and fasteners Sizes Available Warranties Available 4", 5.5" & 7" faces Warranties Available Included in Full System Roof Warranty Wind Warrantyy y ppre-finished Kynar y warrantyy 20-year, 10-year standard; upp to 20 yyears for custom ppost-finish 110 mph p Included in Full System Roof Warranty Wind Warrantyy 20-year, y pre-finished p Kynar y warrantyy 10-year standard; upp to 20 yyears for custom post-finish p 110 mph p V E R S I C O R O O F I N G S Y S T E M S VERSI TRIM MATERIALS AND FINISHES New Express Colors & Express Lead Times* Now receive products in popular colors & gauges quicker than ever before Stone White Sandstone Sierra Tan Mansard Brown ABCD ABCD ABC ABC Bone White Cityscape ABC Medium (Roman) Bronze ABCD Colonial Red ABCD Almond Slate Gray Dark Bronze ABC ABC ABCD Forest (Sherwood) Green ABC Silver Metalic Mill Finish & Clear Anodized ABC BCD ABC *Express Lead Times only available on 24 ga., .040", .050" materials Granite Brandywine (Burgundy) Regal (Interstate) Blue Hartford Green ABC ABC ABC ABC Charcoal (Gray) Terra Cotta Teal Hemlock Green ABC AB AB AB Extra Dark Bronze Regal (Cardinal) Red Patina Green Tropical Patina AB ABC ABC AB Matte Black Sky (Military) Blue Dark Ivy ABCD ABC AB Brown Stone Lime Stone Cast Stone Sand Stone BCD BCD BCD BCD Stone Look Colors .040", .050" & .063" aluminum Materials Key: A - 24 gauge steel B - .040" aluminum Other Available Finishes C - .050" aluminum D - .063" aluminum Versico also offers standard coil anodized finishes in clear, medium bronze, dark bronze and black. In addition to our standard finishes, Versico can provided custom color, post-coated Kynar paint finishes and batch anodized finishes on all mill aluminum gauges listed. Standard anodized finishes that utilize a continuous coil anodizing process to provide excellent color consistency from piece to piece are available. However, shade variations may occur from coil batch to coil batch. IMPORTANT NOTE: Batch anodizing is also available. Due to shade variations that occur in the anodizing process, it is recommended that the contractor work with the architect or building owner to sort and install products in the arrangement best suited to the owner’s preference. We are not responsible for shade variations inherent to the anodizing process. Classic (Penny) Copper & Champagne Metallic (Champagne): 24 ga., .040" & .050" RHEINZINK® : 24-18 ga. Galvanized Steel (G-90 or Paint Grip): 20 ga., 24 ga. & 22 ga. 110 Copper: 16 oz. & 20 oz. 304 Stainless Steel (2B or Polished): 20 ga., 24 ga. & 22 ga. Kynar 500 ® based fluropolymer coating is a high-grade architectural finish offering excellent resistance to degradation caused by nature’s elements and airborne contaminants. A limited twenty (20) year warranty is available on the prefinished coil-coated steel and aluminum colors shown. A limited ten (10) year warranty is included for post-painted Kynar-coated aluminum applications unless otherwise stated. A twenty (20) year warranty is also available only upon request at the time of order. Restriction may apply; consult a sales representative for specific information. The color reproductions are as accurate as modern printing technology will permit and may vary slightly from actual colors supplied. Finished color chips samples are available upon request. Versico will not be held responsible for color selections chosen from printed literature. By presenting this catalog, Versico does not claim to serve in any but an advisory capacity and can undertake no liability. If necessary, all recommendations contained herein regarding the use of our products should be modified to conform with local conditions and the materials employed. Versico reserves the right to make changes or to amend any of the information contained in this publication, whether to present new information obtained, or as needed to conform to a specified project, job or climactic condition. A S I N G L E S O U R C E F O R S I N G L E - P LY R O O F I N G Ve r s i c o , P O B o x 12 8 9, C a r l i s l e , PA 17013 Te l : 8 0 0 .9 9 2 . 76 6 3 F a x : 717.9 6 0 . 4 0 3 6 We b : w w w.ve r s i c o . c o m © 2012 Vers Versico. ico. ico. ico REPR REPRINT E INT NT REQU REQUEST ES CODE EST CO ODE : 6005 600586 600 86 6 – Ver VersiTrim VersiTr siTr siT iT im m Broch rochure ure (Met ure Metal Era) Me Era) – 09 09.05. .05. 05 5 12 Versico, Vers e ico ico, ico, o Ver VersiGa siGard, siGa iG rd, d Vers d, VersiWel iWeld, iWel d, Vers d, ersi siTri Tr m an Trim and ndd the hee VVer eersico si log sic go are ar a e regist r gist re gistered gis i tered ereed d t rad rade ddemark marr s of Ver Versico e sico sico.. Ky K nar 500 is a reg registe re gis iste sste stered t rred eed trad ad demar em markk ffor Arkema AArrkema kema kem a, In Inc. cc..