2004 catalog lo

Transcription

2004 catalog lo

w w w. e a s t o n . c o m
Log on to www.easton.com for up-to-date information
about the World’s Most Accurate Arrows and Authentic
Components from Easton. Access our shaft selection charts,
view hot news from the archery industry, and order your
Easton Outfitters gear and attire. On the Easton Archery
bulletin board, archers exchange ideas and information
about bow tuning and other related topics. Ask questions,
offer advice or read interesting tips from other archery
enthusiasts. You can also download upgrades to Easton’s Shaft
Selector Plus software program with a click of your mouse.
E ASTON
BOWHUNTING
AND TARGET
ARC HE RY
GUIDE
2004
Expect IT
Just as the seasons change from indoor target competition to
3D tournaments—from turkey to whitetail hunting, so does
our selection of top-quality gear and attire.
With Easton Outfitters, you can expect quality. Easton
guarantees 100% satisfaction. Easton gear and attire is
available online at www.easton.com.
EASTON TECHNICAL PRODUCTS
5040 West Harold Gatty Drive
Salt Lake City, Utah 84116, USA
Telephone: (801) 539-1400 • Fax: (801) 533-9907
expect it
1
Expect SUCC E SS
When you think back, isn’t it hard to explain
GARY BOGNER
PATRICK MEITIN
RANDY ULMER
FRED EICHLER
DARRELL DAIGRE
JACK WALLACE
BILL JORDAN
BRANDON RAY
KAREN HOWELL
ERIK WATTS
JEFF MILLAR
JAY VERZUH
PHIL PHILLIPS
which moment or event defined your hunt as
“successful?” The split second you release the fateful
arrow from the string. The haunting sound of a
rutting bull elk answering your call. Or perhaps it
goes back to your decision to get in a little physical
conditioning—even if it killed you.
Bowhunting success doesn’t just happen in a
single, fleeting moment. It isn’t defined only by meat
in the freezer or the mount on your wall. Real success
is the whole experience, right down to choosing
equipment you can trust.
Easton has been helping bowhunters write
success stories for more than 80 years. We know the
hard work, commitment, patience and perseverance
bowhunting requires. Because manufacturing the best,
most popular arrows on the market doesn’t happen
overnight either.
Our goal today, as it has been for decades,
is to continually innovate to provide bowhunters
world-class arrow shafts and components that our
competitors can only dream of.
You can expect it, because we expect it of ourselves.
CHUCK ADAMS
2
RAY HOWELL
MICHELE MUSACCHIA
RUSSELL THORNBERRY
JIM DOUGHERTY
We support the organizations that work tirelessly to promote
our sport, along with wildlife programs and habitat initiatives that
will ensure a bright future for all of us who love to hunt. When
you purchase an Easton product, you are not only buying the
very best arrow, you are helping to perpetuate something you
love. The outdoors… archery… and bowhunting.
Archery Trade Association — ATA
Bowhunter Defense Fund
Buckmasters
Farmers and Hunters Feeding the Hungry — FHFH
National Field Archery Association — NFAA
National Rifle Association,Youth Hunter Education Challenge — NRA
National Shooting Sports Foundation — NSSF
Rocky Mountain Elk Foundation
Safari Club International — SCI
Sportsmen for Fish and Wildlife
United Sportsmen
3
AXIS
ST
DEVASTATING PENETRATION—the result of focusing the bow’s energy
into the ultra-small diameter. UNEQUIVOCAL ACCURACY—achieved with
the combination of a small diameter and our patent-pending Hidden Insert
Technology. Perfect for today’s drop-away rests and expandable broadheads.
SUPER TOUGH and DURABLE—far more durable than the competition.
Years of development and testing culminated in patent
pending Slim Technology. Easton’s new development
creates a better hunting arrow with improved penetration,
reduced wind drift, and super-tough construction.
C2 CARBON COMPOSITE
Micro-smooth finish for reduced wear on the
arrow rest, quiet draw and release and easy
removal from targets.
Ultra small diameter and unidirectional carbon-fiber core
High-strength composite fibers for exceptional durability
and hoop-strength
Unidirectional high-strength carbon fibers
NEW
ST Axis—Hot New Hunting Arrow Technology—Only From Easton.
Perfectly balanced spine, weight and small OD provide the
optimum blend of penetration, kinetic energy, speed and accuracy.
Axis arrows are less affected by crosswinds, giving you even more
confidence when releasing the shot of a lifetime. Our innovative
new design and proprietary manufacturing processes make Axis
arrows much more durable than the competition.
• High-strength C2 carbon composite fibers
• Weight tolerance: ± 2.0 grains
• Straightness: ± .005" (.010" T.I.R.)
• Black, micro-smooth finish
• Sizes: 500, 400, 340, 300
• Internal-fit “X” Nock - Included
• HIT Insert - Included
• Points and broadhead adapter rings - Sold separately
AXIS
Size
500
400
340
300
1
2
3
4
NEW “X” Nock
Shaft
Shaft Weight Spine @
Stock
Weight @ 29" 28" Span Length
Grains per
Deflection in
inch
Grains
inches
Inches
8.10
235
0.500
31
8.95
260
0.400
311⁄2
9.53
276
0.340
32
10.69
310
0.300
321⁄2
“X”
Nock1
H.I.T.
Insert2
RPS
Point3
Broadhead
Adapter
Ring4
Grains
9
9
9
9
Grains
16
16
16
16
Grains
17⁄64
17⁄64
9⁄32
9⁄32
-18
Axis 400
-39
-49
PROVEN RESULTS. Our field testers are ecstatic
PENETRATION
with the penetration, durability and accuracy
of Axis with Slim Technology.
“X” Nock comes loose in bag with nock installation tool.
HIT inserts designed specifically for ST Axis.
Use ATA Standard RPS points. RPS Parabolic Target Points are available in 50-125 grains.
Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
“I’m stoked! Easton has the answer we carbon boys have
Note: One size HIT Insert fits all ST Axis shaft sizes.
been waiting for—a heavy weight, smaller diameter carbon
hunting arrow. You add that critical weight to a smaller
Hot New Insert Technology—Only From Easton.
surface area, and you’ve got some powerful penetration.”
Fred Eichler
HIDDEN INSERT TECHNOLOGY
Expect POWER
HIT puts the critical broadhead interface directly against the ID of the
shaft, eliminating variability and inaccuracy found with standard inserts.
RPS Point
Broadhead Adapter Ring
(for 0-ring design broadheads)
HIT Insert
Hidden Insert Technology is combined with our Slim Technology (ST) shaft for unrivaled
alignment, accuracy and compatibility with today’s hottest broadheads. Co-developed
with leading broadhead manufacturers, HIT components are a unique system. Using
our system, bowhunters can easily achieve precise broadhead alignment without the
trial and error of the past.
“Thank you, Easton. Axis and I have 20 big-game trophies
to our credit—and we’re just getting started. Besides being
able to easily take down this water buffalo with one arrow,
HIT Chamfer Stone
HIT Installation Tool
Installation is simple, quick and easy. The HIT component system is so unique and
innovative that it’s patent pending. The chamfer stone ensures a flat shaft face and
properly sized chamfer for optimal fit with all broadheads. The chamfer stone,
installation tool and epoxy are included with each dozen shafts. The installation tool
seats the insert at the correct depth and wipes the ID clean of adhesive for simple,
accurate assembly. Complete shaft preparation and component installation instructions
come packaged with every dozen ST Axis shafts.
4
what I like best about Axis is its HIT component
system—talk about perfect alignment! I guess
I’d have to say—Axis just plain has it all.”
ACCURACY
Phil Phillips
5
ALUMINUM/CARBON COMPOSITE TECHNOLOGY
Combine the precision and straightness of aluminum with the stiffness,
durability and speed achieved with carbon, and you have hunting arrow
perfection. Our advanced A/C technology delivers unsurpassed performance
and proven results. Pack the punch found in the industry’s premier hunting
arrows—A/C/C and A/C Kinetic.
INFINITY PERFORMANCE SYSTEM
A/C Kinetic uses Easton’s exclusive bonding process to ensure strong adhesion between the aluminum core and the carbon fibers
Additional wraps of carbon fiber provide greatly increased stiffness with light weight and outstanding durability
The precise inside diameter of the aluminum core tube
was designed to directly accept a Super Nock for a
perfect, flush fit.
A/C Kinetic
A/C Kinetic and A/C/C we deliver the precision and
achieved with carbon. Layers of lightweight carbon
Super Nock or 3D Super Nock
fibers bonded to the precision aluminum core provide
A/C KINETIC
Size
460
400
340
300
RPS Point
CM Insert | Designed specifically for camo
carbon and camo A/C arrows.
Shaft
Weight
Grains per
Inch
9.45
10.20
11.04
11.64
Shaft
Weight
@ 29”
Grains
274
296
320
338
Spine @
28” Span
Deflection in
Inches
0.460
0.400
0.340
0.300
Stock
Length
Super
Nock1
CM
Insert2
Inches
311⁄2
32
321⁄2
33
Grains
13
13
13
13
Grains
23
23
23
23
RPS
Point3
O.D.
Inches
9⁄32
9⁄32
9⁄32
9⁄32
Broadhead
Adapter
Ring4
Size
(3 Grains)
A/C/C -71
A/C/C -71
A/C/C -71
A/C/C -71
extra mass resulting in critical kinetic energy and
downrange punch. With our exclusive A/C technology
and manufacturing processes you can expect unmatched
consistency, strength and flat trajectory.
1 Super Nock factory installed.
2 CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points.
3 Uses 9⁄32 ATA Standard Easton RPS points, field or blunt points. RPS points available in 50-125 grains.
4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
ALUMINUM/CARBON/COMPOSITE
A/C/C
Expect ENERGY
The precise inside diameter and strength
of the aluminum core (0.008" wall) allow
flush fitting point and nock components
to be installed inside the shaft.
Our exclusive process ensures a
permanent bond of the carbon fiber
to the aluminum core.
Layers of unidirectional carbon fibers and epoxy resin matrix offer
unmatched strength when bonded to the precision aluminum core.
A smooth 9-micron finish allows quiet draw and release and easy
removal from targets.
Unmatched consistency, strength and flat trajectory.
• High-strength carbon fiber bonded to a precision
7075 aluminum core tube
• Hunting sizes: 3L-18, 3-18, 3-28, 3-39, 3-49, 3-60, 3-71
Note: Target sizes are shown on page 35.
• UNI Bushing - Installed
• “G” Nock - Sold separately
• Components - Sold separately
At Easton, we promise only what we can deliver. With
straightness of aluminum with the durability and speed
Extra mass for more kinetic energy and penetration.
• High-strength carbon fiber bonded to a precision
7075 aluminum core tube
• Exclusive Easton camo pattern
• PhotoFusion,™ Infinity Performance System
• Sizes: 460, 400, 340, 300
• Internal-fit Super Nock - Installed
• CM Insert - Included
Note: One size CM Insert fits all A/C Kinetic shaft sizes.
The heavier 0.010" aluminum wall provides extra mass for more kinetic energy and better penetration
Our patented PhotoFusion camo is protected for
longer life with our Infinity Performance System that
guards against wear caused by repeated shots into
high-density targets.
A/C/C arrows include factory-installed UNI Bushings
that use the precision-made “G” Nock.
UNI Bushing
“G” Nock
A/C/C HUNTING
UNI1 System
8-32 RPS Insert
RPS Point
8-32 Halfout Insert
One-piece Parabolic Point
Size
3L-18
3-18
3-28
3-39
3-49
3-60
3-71
Shaft
Shaft Weight Spine @ 28” Stock
Weight @ 29”
Span
Length
Grains per
Deflection in
Inch
Grains
Inches
Inches
7.47
7.82
8.11
8.58
8.83
9.45
9.92
217
227
235
249
256
274
288
0.620
0.560
0.500
0.440
0.390
0.340
0.300
31
31
311⁄2
311⁄2
32
321⁄2
33
Point/
Insert
Sizes
-18
-18
-28
-39
-49
-60
-71
Bushing “G” Nock2
NIBB
Point
One-Piece Parabolic Point
Medium
Wt.
Light Wt.
Extra Light Hyper Light
Wt.
Wt.
Two Piece
RPS Inserts4
8-32
Halfout
8-32
Alum.
Grains
Grains
Grains3
Grains3
Grains3
Grains3
Grains3
Grains3
Grains3
3
3
4
5
6
7
8
7
7
7
7
7
7
7
100
100
100
100
—
—
—
82
82
87
85
100
108
114
70
70
70
70
80
90
90
60
60
60
60
70
80
80
70
70
70
70
80
90
90
16
16
18
22
—
—
—
—
—
—
—
9
11
14
Sizes 2-00 through 3-04 are available for target. See page 35 for specifications.
— Indicates not available.
1 UNI—Universal Nock Installation System
2 Easton “G” Nock is available in Opaque Black, White and Translucent Green, Orange and Red, and comes in .088"
and .098" string groove sizes.
3
4
5
6
Broadhead
Adapter
RPS Point5 Ring6
Grains
17⁄64
17⁄64
17⁄64
9⁄32
9⁄32
9⁄32
5⁄16
3
3
3
3
3
3
3
NIBB Point grain weights are ±0.5 grains; all other components are ±1 grain.
RPS = Replaceable Point System with 8-32 ATA Standard thread.
RPS Parabolic Target Points are available in 50-125 grains.
Adapter ring size matches point insert size.
NIBB Point
6
7
CARBON HUNTING
C2
What makes Easton C2 carbon hunting arrows superior to all others on the
market? C2 arrows provide the most consistent weight, straightness and spine
from shaft to shaft of any all-carbon arrow.
Our C2 technology and advanced manufacturing
processes are proven to provide ultimate accuracy,
durability and consistency, plus increased kinetic
energy downrange. C2—Powerful hunting arrows
from Easton.
NEW
INFINITY PERFORMANCE SYSTEM
Unidirectional carbon-fiber core for precise component fit
Our micro-smooth Infinity Performance System guards
PhotoFusion graphics against wear caused by repeated shots
into high-density targets.
High-strength composite fibers for exceptional durability and hoop-strength
Unidirectional high-strength carbon fibers
Expect TRUTH
C2 Mossy O a k O b s e s s i o n
Easton TruSpecs
represent maximum
Mossy Oak’s new Obsession camo pattern is proof that
they live by their motto “Bowhunting is not a passion, it’s an
obsession.” This bold new pattern provides great contrast, no
matter what the season.
• Weight Tolerance: ± 2.0 grains
• Mossy Oak® Obsession™ camo pattern
• PhotoFusion, Infinity Performance System
• Sizes: 500, 400, 340, 300
NEW
measurements, not
“average” or “desired,” which means that every
Easton arrow is as good as we say it is, and usually
C2 OBSESSION & HARDWOODS GREEN
RPS Point
Size
CM Insert | Designed specifically for camo
carbon and camo A/C arrows.
500
400
340
300
1
2
3
4
Note: One size CM Insert fits all Mossy Oak Obsession
and Realtree Hardwoods Green HD shaft sizes.
Shaft
Weight
Grains per
Inch
8.02
9.12
10.01
10.14
Shaft
Weight @ Spine @ 28" Stock
29"
Span
Length
Deflection in
Grains
Inches
Inches
233
0.500
31
264
0.400
311⁄2
290
0.340
32
294
0.300
321⁄2
Super
Nock1
CM
Insert2
Grains
13
13
13
13
Grains
23
23
23
23
RPS
Point3
O.D.
Inches
9⁄32
9⁄32
9⁄32
9⁄32
Broadhead
Adapter
Ring4
Size
(3 Grains)
A/C/C -71
A/C/C -71
A/C/C -71
A/C/C -71
better. That kind of guarantee from a company with an
80-year reputation for honesty and quality gives you
one less thing to worry about on your next hunt.
Super Nock factory installed.
CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points.
Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS target points available in 50-125 grains.
C2 REALTR E E H a rd w o o d s G re e n H D
Realtree’s High Definition Hardwoods Green captures every
detail of every leaf. And with Easton’s PhotoFusion graphics and
Infinity Performance System, it will last forever.
• Realtree Hardwoods Green HD camo pattern
• PhotoFusion, Infinity Performance System
• Sizes: 500, 400, 340, 300
Fits directly into the shaft for
perfect alignment.
C2 Carbon E p i c
Epic’s C2 construction provides more kinetic energy downrange
and consistent arrow performance.
• Weight Tolerance: ± 2.0 grains
• Sizes: 500, 400, 340, 300
• CB Insert - Included
C2 EPIC
Size
RPS Point
CB Insert
Note: One size CB Insert and CB Point fits all Epic
shaft sizes.
500
400
340
300
1
2
3
4
Shaft
Shaft Weight Spine @ 28"
Weight @ 29"
Span
Grains per
Deflection in
Inch
Grains
Inches
7.03
204
0.505
8.17
237
0.415
9.00
261
0.370
9.14
265
0.330
Stock Super
CB
RPS
Length Nock1 Insert2 CB Point Point3
O.D.
Inches Grains Grains
Grains
Inches
9
31
13
21
100/80
⁄32
9⁄32
311⁄2
13
21
100/80
9
32
13
21
100/80
⁄32
9⁄32
321⁄2
13
21
100/80
Broadhead
Adapter
Ring4
Size
(3 Grains)
A/C/C -60
A/C/C -60
A/C/C -60
A/C/C -60
CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points.
Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.
CB Point
8
9
WRAPPED CARBON
Easton offers the most complete range of carbon arrows to match any bow
setup—built to our strict standards of quality and performance, at incredibly
low prices. Our technology sets the standard for true carbon arrow
WRAPPED CARBON
performance. Easton TruSpecs ensure all our arrows always meet, and in most
cases exceed our published spine, straightness and weight specifications and
tolerances.
Micro-smooth finish for reduced wear on the arrowrest and easy removal from targets.
Radial core
You know how critical straightness, weight and spine
Uni-directional overlays
around the shaft are to peak arrow performance.
Just as important, is that these factors are consistent
with every arrow in your quiver. Because, if
LightSpeed
the arrow on your string at that critical
moment doesn’t fly just like the ones you
Super-fast, lightweight arrow—the perfect 3D performer.
practiced with—well, better luck next time.
• Multi-layer wrapped carbon fibers
• Black, smooth matte finish
• Sizes: 500, 400, 340
Note: One size CB Insert and CB Point fits all
LightSpeed shaft sizes.
Our commitment at Easton is to manufacture
every arrow to the same strict standards of quality.
LIGHTSPEED
Size
RPS Point
CB Insert
500
400
340
1
2
3
4
Shaft
Broadhead
Shaft Weight Spine @ 28" Stock Super
CB
RPS
Adapter
1
2
3
Weight @ 29"
Span
Length Nock Insert CB Point Point
Ring4
Grains per
Deflection in
O.D.
Size
Inch
Grains
Inches
Grains
Inches
(3 Grains)
6.53
7.41
8.16
189
215
237
0.500
0.400
0.340
323⁄4
33
331⁄4
13
13
13
21
21
21
100/80
100/80
100/80
9⁄32
9⁄32
9⁄32
A/C/C -60
A/C/C -60
A/C/C -60
When we publish spine, straightness and weight
specifications and tolerances, you know that we will
meet, if not exceed them.
CB Point
Expect CONSISTENCY
Super Nock or 3D Super Nock |
fits directly into the shaft for perfect alignment
Carbon Exc e l
Outstanding performance at an exceptional price.
• Multi-layer wrapped carbon fibers
• Black, smooth matte finish
• Sizes: 500, 400, 340
EXCEL
RPS Point
CB Insert
Note: One size CB Insert and CB Point fits all Excel
shaft sizes.
CB Point
10
Size
500
400
340
1
2
3
4
Shaft
Broadhead
Shaft Weight Spine @ 28" Stock Super
CB
RPS
Adapter
Weight @ 29"
Span
Length Nock1 Insert2 CB Point Point3
Ring4
Grains per
Deflection in
O.D.
Size
Inch
Grains
Inches
Grains
Inches
(3 Grains)
7.10
8.12
8.80
206
235
255
0.500
0.400
0.340
323⁄4
33
331⁄4
13
13
13
21
21
21
100/80
100/80
100/80
9⁄32
9⁄32
9⁄32
A/C/C -60
A/C/C -60
A/C/C -60
11
XX78 HUNTING
AUTHENTIC EASTON COMPONENTS
Tough game demand tough arrows. XX78 Super Slam and Super Slam
Select are packed with the extreme durability of our super-strong
7178-T9 aluminum alloy. And besides their relentless power, a
straightness tolerance of ± .0015" means they are dead-on accurate too.
Precision-machined lightweight Super UNI Bushings are factoryinstalled for perfect nock alignment. Easton Super Nocks are made of
tough ultrapoly material. The double “snap” throat keeps the arrow
on the string even at the most extreme angles.
We supply our aluminum shafts with precision Easton RPS Inserts
to ensure that the extreme accuracy of Easton shafts is not
compromised with off-brand inserts.
XX78 Supe r S l a m S e l e c t
Patented Super Swage - The ultimate nock attachment system.
Super Swage is precision-formed to a parallel section that
is then machined true to the shaft for perfect nock fit. This
technology provides lighter weight, increased surface contact
between the nock and the shaft, more streamlined flight, and
undeniable accuracy.
• 7178-T9 aluminum alloy
• Strength (psi): 100,000
• Weight tolerance: ± 1%
• Super Swage™
• Hard-anodized, forest-enhanced Super Slam
PermaGraphic camo
• Sizes: 2114, 2117, 2212, 2213, 2216, 2312, 2314, 2315, 2413, 2512
• 8-32 Insert - Included
• Points - Sold separately
Super Swage | (US patent no. 6,017,284)
Field Point
8-32 RPS Insert
NIBB Point
Expect QUALITY
One-Piece Bullet Point
Super UNI Bushing
XX78 Supe r S l a m
It’s true, history repeats itself. Just ask Chuck Adams—who
repeats history time and again with his XX78 Super Slams.
• Hard-anodized Super Slam PermaGraphic camo
• Sizes: 2114, 2117, 2212, 2213, 2215, 2216, 2219, 2312, 2314, 2315,
2317, 2413, 2512, 2514, 2613
• Super UNI Bushing and Super Nock - Installed
• 8-32 Aluminum RPS Insert - Included
“My time and commitment deserve to be matched with the
best equipment made. For me, bowhunting isn’t a hobby
I enjoy in my spare time—it’s what I do. I shoot Easton
because I won’t compromise when it comes to quality—
Field Point
8-32 RPS Insert
NIBB Point
I choose XX78 because they’ve never let me down. My
Chuck Adams relives his journey for the 27
North American big game species in his new
book “Super Slam!”. To order, call IHUNT
Communications, toll free at 1-866-837-3135.
One-Piece Bullet Point
12
body or patience might fall short on total
performance, but my Easton aluminum
arrows never will.”
Chuck Adams - Renowned Extreme Bowhunter
See aluminum shaft and component specifications on page 22.
13
XX75 CAMO
More bowhunting success stories start with XX75 arrows, made from tough
7075-T9 aluminum alloy, than any other arrow on the market. That tradition
of success continues with the NEW XX75 Realtree HD Green and Mossy
Oak New Break-Up, inspired by the two hottest camo patterns out there.
Authentic Easton Components, including precision-machined RPS point inserts
and Super UNI System with Super Nocks, ensure perfect point and nock
alignment—always.
PERMAGRAPHIC CAMO
With Easton XX75 camo arrows, you get the experience and precision of Easton combined with
the extraordinary concealment of Mossy Oak and Realtree. These hard-anodized PermaGraphic
camouflaged arrows are tough, accurate performers that will never let you down.
XX75 REALT R E E H a rd w o o d s G re e n H D
Realtree’s Hardwoods Green HD camo pattern adapts to every season
and region. Combine that with the durable, accurate and consistent
XX75 alloy, and you have the perfect all-season hunting arrow.
• Hard-anodized Realtree Hardwoods Green
PermaGraphic camo pattern
• Sizes: 2013, 2114, 2117, 2213, 2216, 2314, 2315, 2413, 2514
Field Point
8-32 RPS Insert
NIBB Point
One-piece Bullet Point
Super UNI Bushing
XX75 Moss y O a k N ew B re a k - U p
Mossy Oak’s NEW Break-Up camo pattern is a blend of
extremely life-like images of leaves, bark, limbs and shadows
for a dramatic three-dimensional quality and a completely new
background of textured bark.
• Hard-anodized Mossy Oak NEW Break-Up
PermaGraphic camo pattern
• Sizes: 2013, 2114, 2117, 2213, 2216, 2314, 2315, 2413, 2514
The gnarliest, most impressive elk of your dreams is
the one that has been around the forest a time or two.
And the most successful bowhunter in the forest isn’t
the guy on his first outing—but the experienced
Field Point
8-32 RPS Insert
NIBB Point
Expect E XPE RIE NC E
bowhunter, who’s prepared, confident
and knowledgeable.
Our experience promises a wealth of
knowledge, resources and proven results that no other
arrow company can provide‚ and that’s why Easton
arrows are the best, most popular arrows on the market.
14
15
XX75 HUNTING
With Easton, you know there is an
For more than 30 years, XX75 arrows have put smiles on the faces of
bowhunters and meat in their freezers. As popular today, XX75 still sets the
standard for durability and consistency. Our hard-anodized graphics offer a
wide selection of camo patterns and striking solid finishes.
Expect C HOIC E S
arrow to exactly match your
bow setup. We believe
in choices. From our wide selection, you will find the
XX75 Qua t t ro
ideal arrow size for your bow and shooting style—using
a variety of materials that perform exactly as they
Precision hunting arrow in a striking camo pattern.
were intended. Only Easton offers you such a range of
• Hard-anodized Easton PermaGraphic camo pattern
• Spine/Size: 510/2114, 460/2213, 420/2215, 400/2117, 390/2314,
375/2216, 365/2413, 340/2315
consistent performance and versatility.
Super UNI Bushing
Super UNI Bushing
(sizes 2013 and larger)
XX75 Yuko n G a m e ge t t e r II I
Rugged XX75 construction puts any game within reach.
• Hard-anodized rich bronze
• Sizes: 2016, 2114, 2117, 2213, 2216, 2314, 2315, 2413
Field Point
8-32 RPS Insert
NIBB Point
XX75 Plati n u m P l u s
All-season contemporary looking arrow for bowhunting, target
and field competition.
• Hard-anodized platinum silver
• Sizes: 1416, 1516, 1616, 1713, 1716, 1813, 1816, 1913, 1916,
2013, 2016, 2114, 2115, 2213, 2315, 2413
• UNI or Super UNI Bushing - Installed
• “G” Nock, 3-D Super Nock or Super Nock Sold separately
UNI Bushing and “G” Nock
(sizes 1916 and smaller)
Note: Underlined sizes use UNI & “G” Nock, all
other sizes use Super UNI System with Super Nock
or 3D Super Nock.
16
17
XX75 CLASSICS
It’s the hundreds of things we can’t count on that
The renowned XX75 line of aluminum arrows—trusted and true. XX75s,
constructed of the rugged, dependable, and always-consistent 7075-T9 alloy,
will be racking up bowhunting memories for a very long time.
make this sport so challenging, and identify
bowhunters as the most passionate and
dedicated sportsmen and women on the planet.
XX75 Cam o H u n t e r
Classic hunting performance.
• Hard-anodized four-tone black, brown, dark green
& light green camo pattern
• Sizes: 1816, 1913, 1916, 2013, 2016, 2018, 2113, 2114, 2115, 2117,
2213, 2215, 2216, 2219, 2314, 2315, 2317, 2413, 2419, 2514
• Reduced diameter taper swage
• Conventional nock - Sold separately
The weather won’t always be on your side. The rough
Conventional Nock
terrain will kick your butt. And the animal will deviate
from his pattern for no reason at all. But, you depend
on your drive, mental stamina, physical conditioning
and passion to keep you going.
Field Point
And now, when you’re at full draw, you can depend on
8-32 Aluminum RPS Insert
your Easton arrow to perform perfectly. Only Easton
can promise true and honest arrow specifications that
NIBB Point
will keep you focused on that incredible buck. After
Expect DE PE NDABILIT Y
everything you’ve
conquered to get to this point—
XX75 Gam e ge t t e r I I
why would you take a chance
An excellent value for the beginning bowhunter or the seasoned veteran.
• Weight tolerance: ± 11⁄4%
• Hard-anodized three-tone black, tan &
brown camo pattern
• Sizes: 1716, 1816, 1916, 2016, 2018, 2115, 2117, 2215, 2216,
2219, 2315
• Full-diameter taper swage
Conventional Nock
with any other arrow.
XX75 Gam e ge t t e r
Just as dependable today as they were three decades ago.
• Weight tolerance: ± 11⁄4%
• Hard-anodized dark green
• Sizes: 2016, 2018, 2117, 2216, 2219
18
Conventional Nock
19
XX75 TRADITION
Bowhunting is a tradition passed on from our
While the XX75 Legacy has every appearance of Doug Easton’s four-footed
cedar arrows, originated in 1931, it shares the consistent, reliable performance
of the rest of the XX75 line, with exceptional straightness and uniform weight
in every arrow.
forefathers, whose very survival depended on a
bow and arrow, and their skill and instincts. It is a
legacy entrusted to us to pass on to our children. The
XX75 Lega c y
memories we share of bowhunting experiences bond
the ties of family. But, we must also remember our
Traditional style with dependable performance.
• Cedar, PermaGraphic woodgrain pattern
• Sizes: 1916, 2016, 2018, 2020, 2117, 2216, 2219, 2315
• Inserts and points - Sold separately
Conventional Nock
responsibility to instill our children with respect for
wildlife and its habitat, and reinforce our obligation as
hunters to protect and preserve our freedom to hunt.
Expect TR ADITION
Field Point
At Easton, we
are dedicated to
8-32 RPS Insert
protecting and promoting
our privilege of bowhunting, now and well into
NIBB Point
the future. It is also our tradition, today as it
was more than 80 years ago, to provide
bowhunters with the best arrows in the
XX75 CROSSBOW BOLTS
world. And we honor that tradition in
XX75 crossbow bolts are constructed of the same 7075-T9 alloy as
our trusted XX75 arrows. Super tough—always dependable. Make sure
the next bolt you fire from your crossbow will perform just like the
last. Shoot Easton aluminum bolts for unparalleled consistency.
every product we make.
XX75 Cros s b ow H u n t e r
Halfmoon Nock
XX75 Gam e ge t t e r I I
Flatback Nock
Tough, durable, hard-hitting action.
• Lengths: 16", 20", 22"
• Sizes: 2117, 2216, 2219
• Inserts, nocks and points - Sold separately
Field Point
20
8-32 RPS Insert
21
SAFETY RECOMMENDATIONS
ALUMINUM BOWHUNTING SHAFT
AND COMPONENT SPECIFICATIONS
WARNING
FOLLOW THESE INSTRUCTIONS TO AVOID PERSONAL INJURY.
SEE WARNINGS AND USE @ www.bsafe.ws or 877-INFO-ETP
You get honest and accurate shaft and component specifications only with Easton TruSpecs.
Stock
Length3
Shaft Weight
Size
XX751
XX782
1716
1813
1816
1913
1916
2013
2016
2018
2020
2113
2114
2115
2117
2212
2213
2215
2216
2219
2312
2314
2315
2317
2413
2419
2512
2514
2613
Grains per Inch
9.03
—
7.86
—
9.27
—
8.34
—
10.05
—
9.01
—
10.56
—
12.28
—
13.49
—
9.30
—
9.86
9.94
10.75
—
12.02
12.13
—
8.84
9.83
9.92
10.67
10.77
12.02
12.13
13.77
13.89
—
9.48
10.67
10.76
11.67
11.77
13.26
13.38
10.40
10.50
14.55
—
—
10.28
11.33
11.43
—
11.49
Shaft
Weight
@ 29”
Spine @
28” Span
751/782
Grains
262
228
269
242
291
261
306
356
391
270
286
312
349
256
285
309
349
399
275
309
338
385
302
422
298
329
333
Deflection in
inches
0.880
0.874
0.756
0.733
0.623
0.610
0.531
0.464
0.426
0.540
0.510
0.461
0.400
0.505
0.460
0.420
0.375
0.337
0.423
0.390
0.340
0.297
0.365
0.268
0.321
0.305
0.265
Inches
29
30
30
31
31
321⁄2
32
321⁄2
33
321⁄2
321⁄2
33
33
321⁄2
331⁄2
33
33
34
33
331⁄2
34
34
34
341⁄2
341⁄2
341⁄2
341⁄2
UNI System5
Conventional
Nock Size4/9
Inches
1⁄4
1⁄4
1⁄4
9⁄32
9⁄32
9⁄32
9⁄32
5⁄16
5⁄16
5⁄16
5⁄16
5⁄16
5⁄16
—
5⁄16
5⁄16
5 16
⁄
11 32
⁄
—
11 32
⁄
11 32
⁄
11 32
⁄
11 32
⁄
11 32
⁄
—
11 32
⁄
—
Super UNI System5
Bushing6
“G” Nock
Bushing
Super
Nock
3D
Super
Nock
Grains
7
8
8
9
9
—
—
—
—
—
(11)
(11)
—
(13)
(13)
—
—
—
(15)
(14)
—
—
(17)
—
(20)
(18)
(22)
Grains
7
7
7
7
7
—
—
—
—
—
7
7
—
7
7
—
—
—
7
7
—
—
7
—
7
7
7
Grains
—
—
—
—
—
5
4
4
—
7
7
7
7
9
9
9
9
8
11
10
11
11
12
12
15
14
17
Grains
—
—
—
—
—
13
13
13
—
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
Grains
—
—
—
—
—
12
12
12
—
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
— Indicates not available
1 XX75 Mossy Oak New Break-Up, Realtree Hardwoods Green, Quattro, Yukon, Platinum Plus, Camo Hunter, GameGetter,
GameGetter II, Legacy.
2 XX78 Super Slam Select, Super Slam.
3 Length is approximate stock shaft length for each size.
4 Nock size for conventional swaged nock taper.
5 UNI—Universal Nock Installation System.
6 Parenthesis indicates smaller size (“G” Nock). UNI Bushing is available as an accessory, except Super Slam Select.
7 RPS = Replaceable Point System with 8-32 ATA -Standard thread
NIBB
Point
Onepiece
Bullet
Point
RPS7
Insert
Alum.
RPS
Point
Size
Grains8
60
56
63
64
72
68
80
89
64
7810
78
83
97
10211
88
95
98
107
9911
—
—
—
110
—
10811
—
—
Grains
68
—
74
—
82
—
90
—
—
100
100
100
100
100
100
100
100
—
100
100
100
100
100
100
100
100
150
Grains
10
14
12
17
16
21
20
19
18
25
25
25
25
31
30
30
29
26
37
34
37
37
40
37
52
48
58
Inches
17/64
9/32
9/32
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
3/8
8 NIBB point grain weights are ±0.5 grain. All other components are ±1 grain.
9 Legacy, GameGetter and GameGetter II, are produced without reduced diameter taper and can also use the next largest
conventional nock size.
10 2113 shafts use 2114 X7/XX75 NIBB points and 2114-2117 components.
11 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.
F.O.C. is Front-of-Center balance position on the arrow shaft.
Note: Shaft sizes 1716, 1813 and 1816 use A/C/C -60; sizes 1913 and 1916 use A/C/C -71 Broadhead
Adapter Rings.
TRUSPECS AND GUARANTEED CONSISTENCY
!
Arrow Breakage
An arrow shaft can become damaged from impacts with hard objects or other arrows, or after
being shot into a game animal. A damaged arrow could break upon release and injure you or a
bystander. You must carefully inspect each arrow shaft, nock and other components before each
shot to see that they have not been damaged. Before shooting, look closely for nicks, cracks, splits,
dents or other marks that could indicate damage to the arrow. When checking carbon arrows,
perform the following additional tests:
1. Grasp the shaft just above the point and below the nock, then flex the arrow in an arc
(bending it away from you and others) with a deflection of 1 to 2 inches (2.5 to 5 cm), and
listen for cracking noises. Perform this test four to six times, rotating the arrow slightly
between each flex until you have
gone around the entire arrow.
If you hear or feel cracking, the
carbon has been damaged.
2. While still holding the point and
fletching ends, twist the shaft
in both directions. If the arrow
“relaxes” or twists easily, the
carbon has been damaged.
If an arrow has been damaged, or if you believe it has been damaged, do not shoot it again, as it
could break on release, and sharp arrow pieces could hit and injure you or someone nearby.
EASTON SHAFT PREPARATION
AND ASSEMBLY INSTRUCTIONS
Refer to Easton’s “Arrow Tuning and Maintenance Guide” for complete shaft
and assembly instructions. Available from Easton at www.easton.com.
FOR ALL SHAFT TYPES
• Cut shafts to length using only a high-speed abrasive wheel cut-off tool designated for arrow
shafts. Never use rotary tube cutters, a hacksaw or methods that can damage the tube and
leave a rough cut.
• Lightly chamfer the inside of the shaft, just enough to remove any burrs.
• Thoroughly clean the inside of the shaft with a cotton swab wetted with 91% to 99%
isopropyl alcohol (not rubbing alcohol, which can contain oil).
CAUTIONS: Always wear a NIOSH approved dust mask and safety glasses when cutting
any arrow shafts. Be sure to use a dust collector to vacuum up all of the carbon and/or
aluminum dust when cutting arrow shafts.
SPINE
Easton arrows, produced with our advanced technology and manufacturing processes, deliver uniform spine
between all arrow shafts of the same size, and 360° around each shaft. With Easton,you know that your next
arrow will fly like the last.
STRAIGHTNESS
Our straightness measurements are actual, and surpass, with a far more stringent straightness requirement, the
ATA/ASTM industry standard. We measure straightness based on the full length of the shaft, minus two inches,
which makes Easton arrows the most accurate in the industry. What we say is what you get—and better.
WEIGHT
Accuracy requires weight consistency. Different weights will cause arrows to hit higher or lower. We adhere
to strict weight tolerances in every arrow we manufacture, guaranteeing consistent arrow performance.
Whether you’re aiming for gold, or bearing down on a trophy elk, you know that the critical shot you’re about
to take will be as perfect as your practice shot.
22
Bowhunting Precautions
Carbon arrows may be used for hunting if special precautions are taken. Carbon arrow shafts used
in bowhunting could break after being shot into a big game animal. This arrow breakage may be
caused by the angle in which the arrow impacts the animal, or by the reaction of the animal itself
such as rolling on the shaft or hitting against a tree. The break may be inside the animal and may
not be immediately obvious after recovery of the animal.
When a carbon arrow breaks, it tends to shatter with the resulting creation of many sharp,
splinter-like fragments. These fragments can be harmful to humans if ingested; therefore, when
game is recovered, the hunter should always carefully determine whether the arrow has broken
inside the animal.
If the arrow has broken, follow the instructions below:
1. Use extreme caution when removing broken segments of the carbon arrow shaft.
2. When field dressing game animals, use care to avoid splinters of carbon fiber.
3. Carefully remove the flesh in the area of the wounds. It may contain carbon fiber,
particularly at the entry and exit points.
4. Thoroughly clean the surrounding area of the wound
and inspect for the presence of carbon fragments.
5. Carefully dispose of any meat that might contain carbon
splinters. Do not leave for scavengers to eat.
ALUMINUM and ALUMINUM/CARBON SHAFTS POINT AND INSERT INSTALLATION
INSTRUCTIONS Hot Melt Adhesive (Installing POINTS)
Do not apply heat directly to the shaft.
1. Heat a stick of Easton Hot Melt adhesive over a small gas flame until the adhesive is fluid. Use
only Easton hot melt adhesive.
2. Apply a small ring of molten adhesive on the shaft end, just inside the shaft.
3. To prevent over-heating A/C shafts, hold the point head in your fingers and carefully heat
the shank end of the point or insert over a gas flame for 5 to 6 seconds. Be careful not to
burn your fingers. (For aluminum shafts, pliers may be used to hold components, as overheating will happen less with the more conductive aluminum.)
WARNING: OVER-HEATING SHAFT WILL VOID WARRANTY.
4. Apply a film of adhesive completely around the entire shank of the point or insert.
5. Put the point or insert about 1⁄4" into the end of the shaft.
6. Reheat the point for no more than 5 seconds to fully melt the adhesive.
7. Without delay, slowly push the point into the shaft until it seats against the end of the shaft.
Rotate point 1 or 2 revolutions while still warm. DO NOT FORCE A COMPONENT INTO THE SHAFT.
Apply a little more heat to the POINT ONLY if the point “hangs up” during this step.
8. Immediately, while adhesive is soft, wipe off any excess adhesive with a cloth or paper towel.
Allow air-cooling in a point-down position.
9. INSERTS: Use the same procedure as described. Install an RPS point into the insert prior to
installation for ease of handling.
FOR C2 AND ALL-CARBON SHAFTS *(EXCEPT AXIS) - EPOXY INSTALLATION OF COMPONENTS
OR FOR INSTALLATION OF COMPOSITE INSERTS IN ALL TYPES OF SHAFT MATERIAL.
1. AAE brand epoxy or 3M DP390 24-hour cure flexible two-part epoxies are recommended.
2. Apply a small ring of adhesive, just inside the end of the shaft and a generous coating on the
entire shank of the point or insert.
3. Slowly twist the point or insert into shaft and seat it against end of shaft.
4. Wipe off any excess adhesive with a cloth or paper towel.
5. Stand the shaft vertically on the point or insert to cure. Be sure epoxy does not flow into insert threads.
6. This is a permanent installation, and inserts cannot be removed without damaging the shaft.
ALUMINUM, A/C and *CARBON SHAFTS UNI BUSHING INSTALLATION
1. AAE Fastset or other gel-type cyanoacrylate cements are recommended.
2. Apply a thin ring of adhesive completely around the inside diameter of the shaft within 1⁄16”
from the open end.
3. Insert UNI Bushing and quickly seat completely against end of shaft.
4. Stand shaft with UNI Bushing upright.
*ST AXIS and HIT INSERT COMPONENTS
For ST Axis, see shaft preparation and assembly instructions packaged with the arrows. Use epoxy
packaged with components.
LIMITED WARRANTY
The Easton arrow shaft limited warranty covers any defects in material and/or workmanship
for one year from date of purchase. It does not cover damage caused by impact from another
arrow, impact with hard objects, improper cleaning or fletching, or from normal wear.
Warranty does not apply if damage results from any non-compliance of printed instructions.
Arrow shafts that are defective will be replaced by your local dealer or by Easton.
23
BOWHUNTING SHAFT SPECIFICATIONS AND SIZES
CHOOSING THE RIGHT EQUIPMENT
We offer the most accurate arrows in the world, engineered and built to the highest level of
quality. They are available in weights and spines to match virtually every bow and arrow-length
setup. Whether your choice is from our premier A/C/C or A/C Kinetic, our quality carbon arrows
ALUMINUM/CARBON
Materials/Construction
Nock System
Nock Type
Inserts
Points
Weight Tolerance3 Straightness1
Color/Finish
Sizes
A/C Kinetic
High-strength carbon fiber bonded to a
precision 7075 aluminum core tube
Internal-fit
Super Nock or
3D Super Nock
CM Insert
RPS Point
±1.5 grains
±.003" (.006" T.I.R.)
Easton Camo Pattern, PhotoFusion™,
plus Infinity Performance System™
460, 400, 340, 300
A/C/C®
High-strength carbon fiber bonded to a
precision 7075 aluminum core tube
UNI System
“G” Nock
8-32 RPS Insert or
8-32 Halfout Insert
RPS, One-piece Parabolic
or NIBB Point
±0.5 grains
±.003" (.006" T.I.R.)
Black, Micro-smooth Finish
3L-18, 3-18, 3-28, 3-39, 3-49, 3-60, 3-71
See page 45 for target sizes.
Materials/Construction
Nock System
Nock Type
Inserts
Points
Weight Tolerance3 Straightness1
Color/Finish
Sizes
Slim Technology
High-strength C2 carbon composite fibers
Internal-fit
“X” Nock
HIT Insert
RPS Point
±2.0 grains
±.005" (.010" T.I.R.)
Black, Micro-smooth Finish
500, 400, 340, 300
Internal-fit
Super Nock or
3D Super Nock
CM Insert
RPS Point
±2.0 grains
±.005" (.010" T.I.R.)
Mossy Oak Obsession, PhotoFusion, plus
Infinity Performance System
500, 400, 340, 300
Internal-fit
Super Nock or
3D Super Nock
CM Insert
RPS Point
±2.0 grains
±.005" (.010" T.I.R.)
Realtree Hardwoods Green HD,
PhotoFusion, plus Infinity Performance
System
500, 400, 340, 300
C2 Carbon Epic®
Internal-fit
Super Nock or
3D Super Nock
CB Insert
RPS or CB Point
±2.0 grains
±.005" (.010" T.I.R.)
Black, Smooth Matte Finish
500, 400, 340, 300
LightSpeed™
Multi-layer wrapped carbon fibers
Internal-fit
Super Nock or
3D Super Nock
CB Insert
RPS or CB Point
±2.0 grains
±.005" (.010" T.I.R.)
500, 400, 340
Carbon Excel™
Multi-layer wrapped carbon fibers
Internal-fit
Super Nock or
3D Super Nock
CB Insert
RPS or CB Point
±5.0 grains
±.005" (.010" T.I.R.)
500, 400, 340
CARBON
ST™ Axis™
C2 Mossy Oak® Obsession™
C2 Realtree Hardwoods Green® HD
NEW
NEW
NEW
ALUMINUM
Alloy
Strength2 (psi)
Nock System
Nock Type
Inserts
Points
Weight Tolerance
Straightness1
Color/Hard-Anodized Finish
Sizes
XX78® Super Slam® Select
7178-T9
100,000
Super Swage™
Super Nock or
3D Super Nock
8-32 RPS Insert
Field, One-piece Bullet
or NIBB Point
±1%
±.0015" (.003"
T.I.R.)
Forest Enhanced Super Slam
PermaGraphic Camo
2114, 2117, 2212, 2213, 2216, 2312, 2314, 2315, 2413, 2512
XX78® Super Slam®
7178-T9
100,000
Super UNI System
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.0015" (.003"
T.I.R.)
3-Tone Super Slam PermaGraphic Camo
2114, 2117, 2212, 2213, 2215, 2216, 2219, 2312, 2314, 2315,
2317, 2413, 2512, 2514, 2613
7075-T9
95,000
Super UNI System
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
Realtree Hardwoods Green HD
PermaGraphic Camo
2013, 2114, 2117, 2213, 2216, 2314, 2315, 2413, 2514
7075-T9
95,000
Super UNI System
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
Mossy Oak PermaGraphic Camo
2013, 2114, 2117, 2213, 2216, 2314, 2315, 2413, 2514
Quattro™
7075-T10
94,000
Super UNI System
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.003" (.006" T.I.R.)
Easton PermaGraphic Camo
510 (2114), 460 (2213), 420 (2215), 400 (2117), 390 (2314),
375 (2216), 365 (2413), 340 (2315)
XX75® Yukon Gamegetter® III
7075-T9
96,000
Super UNI System
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
Rich Bronze
2016, 2114, 2117, 2213, 2216, 2314, 2315, 2413
XX75® Platinum™ Plus
7075-T9
96,000
UNI or Super UNI
System
“G” Nock,
Super Nock or
3D Super Nock
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
Platinum Grey
1416, 1516, 1616, 1713, 1716, 1813, 1816, 1913, 1916, 2013,
2016, 2114, 2115, 2213, 2315, 2413
XX75® Legacy™
7075-T9
95,000
Full-diameter
Taper Swage
Conventional
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
Cedar-Grain, PermaGraphic
1916, 2016, 2018, 2020, 2117, 2216, 2219, 2315
XX75® Camo Hunter®
7075-T9
96,000
Reduced-diameter
Taper Swage
Conventional
8-32 RPS Insert
or NIBB Point
±1%
±.002" (.004" T.I.R.)
4-Tone Black, Brown, Dark Green &
Light Green Dye Camo
1816, 1913, 1916, 2013, 2016, 2018, 2113, 2114, 2115, 2117,
2213, 2215, 2216, 2219, 2314, 2315, 2317, 2413, 2419, 2514
XX75® GameGetter® II
7075-T9
96,000
Full-diameter
Taper Swage
Conventional
8-32 RPS Insert
or NIBB Point
±11⁄4%
±.003" (.006" T.I.R.)
3-Tone Black, Tan & Brown Dye Camo
1716, 1816, 1916, 2016, 2018, 2115, 2117, 2215, 2216, 2219, 2315
XX75® GameGetter®
7075-T9
96,000
Full-diameter
Taper Swage
Conventional
8-32 RPS Insert
or NIBB Point
±11⁄4%
±.003" (.006" T.I.R.)
Dark Green
2016, 2018, 2117, 2216, 2219
XX75® Realtree Hardwoods Green® HD
XX75® Mossy Oak® New Break-Up™
NEW
NEW
1 Straightness tolerance (T.I.R. = Total Indicator Reading as shaft is rotated 360˚ per ATA ASTM Standard).
Easton straightness measurements comply with the ATA/ASTM industry standard. However, our shafts
also meet a far more stringent straightness measurement of full length minus 2 inches (i.e. 34 inch
shafts are measured at 32 inches).
24
including the NEW ST Axis, or our tried and true XX78 and XX75 arrow models, you can count on
Easton to have the best arrow for your bow.
2 Tensile strength value may vary ±3%.
3 Grains per shafts in a dozen bundle.
New sizes and models are shown in red.
®/™ Registered Trademark/Trademark of Easton.
® Super Slam is a Registered Trademark of Chuck Adams.
® Hardwoods Green HD is a Registered Trademark of Realtree.
® Mossy Oak is a Registered Trademark of Haas Outdoors, Inc.
™ NEW Break-Up is a Trademark of Haas Outdoors, Inc.
™ Obsession is a trademark of Haas Outdoors, Inc.
25
SPINE AND WEIGHT COMPARISON CHART
No other company offers such a comprehensive array of arrow sizes and spines to
fit every setup. Our Comparison Chart illustrates the spine and weight relationship
of all sizes using a 29" shaft length. This relationship is comparable for other shaft
lengths, as well. The spine (stiffness) of the 29" shaft is defined as the measured
deflection (in inches) that results from hanging a 1.94 lb. (880 gram) weight from
ARROW SIZE IDENTIFICATION
the center of the shaft that is supported at two points 28" (71.12 cm) apart. Each
different weight group is indicated graphically by a band of shading on the graph. Our
Shaft Specifications and Sizes Chart show our complete line of hunting arrows, and
our Selection Charts on pages 28-29 will help you find the perfect arrow match for
your type and style of shooting.
BOW WEIGHT/SHAFT SPINE
RELATIONSHIP
Our Spine and Weight Comparison Chart illustrates the
spine and weight relationship of all shaft sizes using a 29"
shaft length. The spine (stiffness) of the shaft is defined
as the measured deflection (in inches) that results from
hanging a 1.94 lb. (880 gram) weight from the center of
the shaft supported at two points 28" (71.17 cm) apart.
Easton uses the resulting number to denote carbon arrow
size, as shown on our selection chart on pages 28-29.
Using this chart, you can easily select another weight
hunting arrow with a similar spine that will shoot well
from your bow by moving horizontally to the left (lighter)
or right (heavier).
.900
1813
1716


.800
— Spine (deflection inches 28-inch span with 1.94 pounds (880 grams) —
1816

LEGEND










A/C/C
Kinetic™
A/C/C®
ST Axis
Obsession/Hardwoods Green HD
Epic™
LightSpeed
Excel™
XX78®
XX75®
XX78 and XX75
Relative thickness of
carbon (graphite) fiber
on aluminum core.
Dash number–last two digits of the
core tube diameter in thousandths of
an inch, e.g. 60=0.360"
Spine (deflection measured in thousandths of an inch) at 28" span for all sizes.
NOTE: The “carbon relative thickness” code followed by the letter “L” (e.g. 3L-04, 3L-18)
indicates a lighter spine shaft (the letter “X” indicates the lightest spine) of that core tube
size with that number of wraps.

1913
.700
Kinetic, ST Axis, Obsession, C2 Hardwoods Green HD, Epic, LightSpeed and Excel
1916
3L-18 

.600

2013
3-18 

500
.500

500
 500
500
3-28
2212
 
2113
2016

Quattro T10
2114 

500
460 

2115
2213
2018


3-39 

400 
400 
.400
2312
400
400
3-49 
340
340

340



400 
400
2314

300


3-60   340
340
3-71 


2216
2413

340 
2512
.300
2020
2215
2315
160
180
200
220
240
300 
280


2219

Aluminum
2514 
300
UltraLite Aluminum, SuperLite A/C/C and Carbon
260
Traditional aluminum arrow size.
2117

2613
UltraLite Carbon

300

300
Arrow outside diameter in nearest sixty-fourths of an inch.
Wall thickness in nearest thousandths of an inch.

2419

SuperLite Aluminum
320
2317
340
Lite Aluminum
360

Standard Aluminum
380
400
420
Weight group bands: Thicker bands indicate heavier weight groups,
thinner multiple bands indicate lighter weight groups.
— Weight (grains) 29-inch shaft only —
26
27
EASTON HUNTING ARROW SELECTION CHART
SELECTING THE CORRECT HUNTING ARROW
Our hunting arrow selection chart will help you find the perfect arrow match for your bow.
Our published arrow specifications are real; what we say is what you get, and
better—no matter what arrow you choose.
1. Determining Correct Hunting Arrow Length
COMPOUND BOW - Release Aid
Bows with cut-out window. The Correct Hunting Arrow Length for bows with a
broadhead cut-out sight window (including bows with overdraws) is determined by drawing
back an extra-long arrow to full draw and having someone mark the arrow one to two inches
in front of where the arrow contacts the most forward portion of the arrow rest.
Correct Hunting Arrow Length
Mark arrow here.
Medium Cam
(grains)
65-85
Bottom
of nock
groove.
Place where arrow contacts most forward
portion of the arrow rest.
100
(grains)
90-110
125
(grains)
115-135
CORRECT HUNTING ARROW LENGTH
Single or Hard Cam
Point Weight
75
1"-2" clearance
(minimum)
150
(grains)
140-160
75
(grains)
65-85
100
(grains)
90-110
125
(grains)
115-135
150
(grains)
140-160
37-41
34-38
31-35
35-39
32-36
29-33
26-30
45-49
42-46
39-43
36-40
40-44
37-41
34-38
31-35
Bows without cut-out window. The Correct Hunting Arrow Length for bows without a
50-54
47-51
44-48
41-45
45-49
42-46
39-43
36-40
cut-out sight window (which will not allow a fixed blade broadhead to be drawn past the back
of the bow) at full draw, mark an extra-long arrow one to two inches in front of the handle.
55-59
52-56
49-53
46-50
50-54
47-51
44-48
41-45
60-64
57-61
54-58
51-55
55-59
52-56
49-53
46-50
65-69
62-66
59-63
56-60
60-64
57-61
54-58
51-55
70-75
67-72
64-69
61-66
65-69
62-66
59-63
56-60
76-81
73-78
70-75
67-72
70-75
67-72
64-69
61-66
82-87
79-84
76-81
73-78
76-81
73-78
70-75
67-72
88-93
85-90
82-87
79-84
82-87
79-84
76-81
73-78
94-99
91-96
88-93
85-90
88-93
85-90
82-87
79-84
Belly of bow (face side)
Correct Hunting Arrow Length
1"-2" clearance
(minimum)
Belly of bow (face side)
Mark arrow here.
Back of bow
(far side)
Note: Correct arrow length is measured from throat
(string hole) of the nock to end of the shaft,
not including point or insert.
Bottom
of nock
groove.
Group A
Bow Draw Length Draw length is measured at full draw from the bottom of the nock
groove to the back (far side) of the bow. Actual arrow length and draw length are only the
same if the end of the arrow shaft is even with the back of the bow (far side) at full draw.
2. Determining Actual Peak Bow Weight—Compound Bows
Compound bows must be measured at the peak bow weight as the bow is being drawn and
not while letting the bow down.
Size
1813
1716
780
The suggested shaft sizes in the charts were determined using a “Standard” Setup
which includes:
• Use of a release aid.
• Compound bow with brace height greater than 61⁄2".
If your setup differs from the “Standard” Setup, use the Variables (following) to make
adjustments to determine the Calculated Peak Bow Weight so the correct arrow size can be
selected on the Chart.
Variables to the “Standard” Setup for Compound Bows:
• Finger release - Add 5 lbs.
• Bows with brace heights less than 61⁄2" – Add 5 lbs.
Overdraw Compound Bows
If you are using an overdraw, make the variable calculations (if any), and then modify the
Calculated Peak Bow Weight of your bow using the chart below.
Length of Overdraw
Bow Weight
1"
2"
3"
4"
5"
For 50#-70# Actual /Calculated Peak Bow Weight,
add to bow weight—
1#
3#
6#
9#
12#
3. Determining Actual Peak Bow Weight—Recurve and
Modern Longbows
Your local archery pro shop is the best place to determine the actual draw weight of your bow.
Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Spine @
Weight Weight
28" Span Model Grs/Inch @29"
0.874
75
7.86
228
0.880
75
9.03
262
0.780
Rdln
6.30
183
Size
1913
1816
690
Group G
Size
2312
2215
2117
2020
3-39
400
460
Spine @
Weight Weight
0.423
SS
9.48
275
0.420
SS, 75 10.67
309
0.400
SS, 75 12.02
348
0.426
75
13.49
391
0.440
A/C/C
8.58
249
0.400
CA, KIN CAWT CAWT
0.460
Rdln
7.32
212
22.5
Spine @
Weight Weight
0.733
75
8.34
242
0.756
75
9.27
269
0.690
Rdln
6.27
182
23.5
A
B
B
C
C
D
E
F
G
H
Spine @
Weight Weight
0.420
SS, 75 10.67
309
0.390
SS, 75 10.67
309
0.400
SS, 75 12.02
348
0.375
SS, 75 12.02
348
0.390
A/C/C
8.83
256
0.400
CA, KIN CAWT CAWT
0.410
Rdln
7.60
220
Carbon & Kinetic Shaft Weights (CAWT)
Hardwoods
Size Spine Kinetic
ST Axis Green HD Obsession
Epic
LightSpeed
Excel
Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29"
500 0.500
8.10 235 8.02 233 8.02 233 7.03 204 6.53 189 7.10 206
460 0.460 9.45 274
400 0.400 10.20 296 8.95 260 9.12 264 9.12 264 8.17 237 7.41 215 8.12 235
340 0.340 11.04 320 9.53 276 10.01 290 10.01 290 9.00 261 8.16 237 8.80 255
300 0.300 11.64 338 10.69 310 10.14 294 10.14 294 9.14 265
1. Once you have determined your Correct Hunting Arrow Length and Calculated or Actual Peak
Bow Weight, you are ready to select your correct shaft size:
1.A Compound bows. In the “Calculated Peak Bow Weight” column (left-hand side of the CHART), select
the column with the type cam on your bow, then the column with the point weight you use. Then
locate your Calculated Peak Bow Weight in that column.
24.5
25.5
26.5
27.5
28.5
24.5
29.5
30.5
31.5
A
B
B
C
C
D
E
F
G
H
I
25.5
26.5
27.5
28.5
29.5
30.5
31.5
32.5
A
B
B
C
C
D
E
F
G
H
I
J
A
B
B
C
C
D
E
F
G
H
I
J
J
B
B
C
C
D
E
F
G
H
I
J
J
K
B
C
C
D
E
F
G
H
I
J
J
K
L
C
C
D
E
F
G
H
I
J
J
K
L
L
C
D
E
F
G
H
I
J
J
K
L
L
L
D
E
F
G
H
I
J
J
K
L
L
L
E
F
G
H
I
J
J
K
L
L
L
Group C
Size
2013
1916
3L-18
600
ACTUAL PEAK BOW WEIGHT - Lbs.
ACTUAL PEAK BOW WEIGHT - Lbs.
32.5
Point Weight
Point Weight
Spine @
Weight Weight
0.610
75
9.01
261
0.623
75
10.05
291
0.620
A/C/C
7.47
217
0.600
Rdln
6.92
201
Size
2413
2314
2315
2216
3-49
400
410
Spine @
Weight Weight
0.365
SS, 75 10.40
302
0.390
SS, 75 10.67
309
0.340
SS, 75 11.67
338
0.375
SS, 75 12.02
348
0.390
A/C/C
8.83
256
0.400
CA, KIN CAWT CAWT
0.410
Rdln
7.60
220
33.5
H
I
J
J
K
L
L
L
75
(grains)
65-85
Size
2113
2016
3-18
500
520
Spine @
Weight Weight
0.540
75
9.30
270
0.531
75
10.56
306
0.560
A/C/C
7.82
227
0.500
CA, KIN CAWT CAWT
0.520
Rdln
7.09
206
Spine @
Weight Weight
0.321
SS
10.28
298
0.365
SS, 75 10.40
302
0.340
SS, 75 11.67
338
0.337
SS, 75 13.77
399
0.340
A/C/C
9.45
274
0.340
CA, KIN CAWT CAWT
0.360
Rdln
8.31
241
Size – indicates suggested arrow size.
Spine – spine of arrow size shown (static). See page 9 for correct Epic spine.
CAWT – Refer to Carbon & Kinetic box (left) for specific model and weight.
Color Designation for Aluminum Arrows – Within each box the aluminum arrows are color-coded.
= lightest and fastest.
= medium weight offering good speed and durability.
= heavier weights for excellent durability and penetration.
= aluminum/carbon and carbon.
1.B Recurve bows and Modern Longbows. In the “Actual Peak Bow Weight” column (right-hand
side of the CHART), select the column with the bow type and then the point weight you use.
Next, locate your Actual Peak Bow Weight in that column.
2. Move across that bow weight row horizontally to the column indicating your Correct Arrow
Length. Note the letter in the box where your Calculated or Actual Peak Bow Weight row and
125
(grains)
115-135
150
(grains)
140-160
75
100
125
150
(grains)
65-85
(grains)
90-110
(grains)
115-135
(grains)
140-160
41-46
38-43
35-40
32-37
47-52
44-49
41-46
38-43
32-36
29-33
26-30
53-58
50-55
47-52
44-49
40-44
37-41
34-38
31-35
59-64
56-61
53-58
50-55
45-49
42-46
39-43
36-40
65-70
62-67
59-64
56-61
50-54
47-51
44-48
41-45
71-76
68-73
65-70
62-67
55-59
52-56
49-53
46-50
77-82
74-79
71-76
68-73
60-64
57-61
54-58
51-55
83-88
80-85
77-82
74-79
65-69
62-66
59-63
56-60
89-94
86-91
83-88
80-85
70-75
67-72
64-69
61-66
95-100
92-97
89-94
86-91
76-81
73-78
70-75
67-72
101-106
98-103
95-100
92-97
82-87
79-84
76-81
73-78
107-112
104-109
101-106
98-103
88-93
85-90
82-87
79-84
113-118
110-115
107-112
104-109
Group E
Group F
Spine @
Weight Weight
Size 28" Span Model Grs/Inch @29"
2212
0.505
SS
8.84
256
2114
0.510
SS, 75
9.86
286
2115
0.461
75
10.75
312
2018
0.464
75
12.28
356
3-28
0.500
A/C/C
8.11
235
500, 460 0.500, 0.460 CA, KIN CAWT CAWT
520
0.520
Rdln
7.09
206
Spine @
Weight Weight
Size 28" Span Model Grs/Inch @29"
2212
0.505
SS
8.84
256
2213
0.460
SS, 75
9.83
285
2115
0.461
75
10.75
312
2018
0.464
75
12.28
356
3-28
0.500
A/C/C
8.11
235
500, 460 0.500, 0.460 CA, KIN CAWT CAWT
520
0.520
Rdln
7.09
206
Group K
Group L
Group J
Size
2512
2413
2315
2219
3-60
340
360
100
(grains)
90-110
35-39
Group D
Group I
Group H
Size
2215
2314
2117
2216
3-49
400
410
23.5
23" 24" 25" 26" 27" 28" 29" 30" 31" 32" 33"
Group B
USING THE HUNTING ARROW SELECTION CHART
28
MODERN LONGBOW
Finger Release
Point Weight
40-44
Back of bow
(far side)
RECURVE BOW
Finger Release
CALCULATED PEAK BOW WEIGHT - Lbs.
Size
2512
2514
2317
3-71
300
Spine @
Weight Weight
0.321
SS
10.28
298
0.305
SS, 75 11.33
329
0.297
SS, 75 13.38
388
0.300
A/C/C
9.92
288
0.300
CA, KIN CAWT CAWT
Size
2514
2613
2317
2419
3-71
300
Spine @
Weight Weight
0.305
SS, 75 11.33
329
0.265
SS
11.49
333
0.297
SS, 75 13.26
385
0.268
75
14.55
422
0.300
A/C/C
9.92
288
0.300
CA, KIN CAWT CAWT
Note: Shaft Weight at 29" is shown on our Arrow Selection Charts. To determine weight at your shaft length, multiply your
actual shaft length by the grains-per-inch (gpi), not including point, insert or UNI Bushing.
SS
XX78 Super Slam Select and Super Slam (7178-T9 alloy)
75
XX75: Platinum Plus, Legacy, Camo Hunter, GameGetter, GameGetter II (7075-T9 alloy), Quattro and Yukon
A/C/C Aluminum/Carbon/Composite
Rdln
Redline
CA
ST Axis, Realtree Hardwoods Green HD, Mossy Oak Obsession, Epic, LightSpeed, Excel
KIN
Kinetic
Suggested shaft sizes were determined using 100-grain points. See “Variables” on left side of page.
Correct Hunting Arrow Length column intersect. The “Shaft Size” box below the CHART with the
same letter contains your recommended shaft sizes. Select a shaft from the CHART depending
on the shaft material, shaft weight and type of shooting you will be doing.
For larger game, you should use heavier shafts.
29

2004 catalog lo

Transcription

Similar documents

LONGFIELD™ 30 SPLINE Super Set

FIRENOCK “G” SERIES

“BE A JUNK FOOD FIGHTER!”

File - Duncan Busby Archery

attached document

38 Super Auto

great tools, great prices free - Snap-on

SUPER HERO CAMP Batman Superman Spiderman

LCK YOU CAN SPEAK LATIN GAME

Borg-Warner T-10 Build/tips (Part 1)