Specs - Climate Solutions, Inc.

CPH C OMMERCIAL
3- TO 5-TON SELF-CONTAINED
PACKAGED HEAT PUMP
P RODUCT S PECIFICATIONS
The new Goodman® CPH 13 SEER Commercial
Packaged Heat Pump feature the environmentally
friendly refrigerant R-410A, which is chlorine-free
to help prevent damage to the ozone layer. Other
features include a high-efficiency scroll compressor
and a high-capacity, steel-cased filter dryer. These
units are housed in a heavy-gauge, galvanized-steel
cabinet with UV-resistant power-paint finish.
Standard Features
13 SEER / 11.3 EER
7.7 HSPF
SINGLE-PHASE & THREE-PHASE
•
•
•
•
•
•
•
•
•
•
•
•
Environmentally friendly R-410A refrigerant
High-efficiency scroll compressor
Copper tube / aluminum fin coils
Contactor with lugs
High-capacity, steel-cased filter dryer
Single-point entry
24-volt terminal strip
Convertible
Easy to service
Built-in filter rack with standard 2” filters
Bottom utility entry
ARI Certified; ETL Listed
Cabinet Features
COOLING CAPACITY: 35,000 — 59,500 BTU/H
HEATING CAPACITY: 35,000 — 58,500 BTU/H
• Heavy-gauge, galvanized-steel cabinet with UVresistant powder-paint finish
• Full Perimeter Rail
• Curb Fit
Contents
Nomenclature................................................. 2
Product Specifications................................. 3
Airflow Data .................................................... 6
Expanded Heating Data ...........................11
Heat Kit Electrical Data .............................12
Expanded Cooling Data ............................15
Dimensions....................................................21
Wiring Diagrams .........................................26
Accessories ...................................................36
SS-CPH36-60
www.goodmanmfg.com
7/08
Supersedes 5/08
PRODUCT SPECIFICATIONS
NOMENCLATURE
C
1
P
2
H
3
060
4,5,6
070
7,8,9
1
10
D
11
X
12
X
13
X
14
Factory-Installed Options
(Coming Soon)
Special Features
X No Features
Brand
C Commercial
Configuration
P Packaged Multi-Position
X
Application
C Cooling
G Gas Heat
H Heat Pump
Economizer Options (Factory Installed)
X No Economizer
Supply Fan/Drive Type/Motor
B Belt Drive
D Direct Drive
H High-Static Belt Drive
Nominal Gross Cooling Capacity
036 3 Tons
120 10 Tons
048 4 Tons
150 12½ tons
060 5 Tons
180 15 Tons
072 6 Tons
240 20 Tons
090 7½ Tons
300 25 Tons
102 8½ Tons
Heating Capacity
CPG
070 70,000 BTU/h
105 105,000 BTU/h
140 140,000 BTU/h
210 210,000 BTU/h
350 350,000 BTU/h
400 400,000 BTU/h
2
Special Treatment
No Treatment/ Standard
Aluminized Heat Exchanger (AH)
1 208v 1 Phase
2 220/240V 1 Phase 5
3 208v 3 Phase
4
5
7
Voltage
460v 3 Phase
380/415v 3 Phase 50 Hz
575v 3 Phase
CPC/CPH
XXX No Heat
010 10 kW Electric Heater
015 15 kW Electric Heater
020 20 kW Electric Heater
025 25 kW Electric Heater
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS — 3 TONS
Cooling Capacity
Total BTU/h
Sensible BTU/h
SEER / EER
IPLV
Decibels
ARI Reference #s
Heating Capacity
BTU/h - COP (47° F)
BTU/h - COP (17° F)
HSPF
Evaporator Motor / Coil
Motor Type
# of Wheels (D x W)
Indoor Nominal CFM
Motor Speed Tap (Cooling)
Indoor Motor FLA (Cooling)
Horsepower - RPM
Piston Size (Cooling)
Expansion Device
Filter Size
Drain Size (NPT)
R-410A Refrigerant Charge Cir #1(oz.)
Evaporator Coil Face Area (ft²)
Rows Deep/ Fins per Inch
Belt Drive Evap Fan Data
# of Wheels (D x W)
Motor Sheave
Blower Sheave
Belt
Condenser Fan / Coil
Quantity of condenser Fan Motors
Horsepower - RPM
Fan Diameter/ # Fan Blades
Outdoor Nominal CFM
Face Area (ft²)
Rows Deep/ Fins per Inch
Piston Size (Heating)
Electrical Data
Voltage/Phase/ Frequency
Quantity of Compressors
Compressor RLA / LRA
Indoor Blower HP / FLA
Outdoor Fan HP / FLA
Total Unit Amps
Min. Circuit Ampacity¹
Max. Overcurrent Protection (amps)²
Entrance Power Supply
Entrance Control Voltage
Operating Weight (lbs)
Ship Weight (lbs)
CPH036
***1D***
CPH036
***3D***
CPH036
***3B***
CPH036
***4B***
CPH036
***7B***
35,000
25,900
13 / 11.3
12.30
76.7
3012031
35,000
25,900
13 / 11.3
12.30
76.7
3009015
35,000
25,900
13 / 11.3
12.30
76.7
3009015
35,000
25,900
13 / 11.3
12.30
76.7
3009016
35,000
25,900
13 / 11.3
12.30
76.7
3009017
35,000 - 3.4
20,800 / 2.3
7.7
35,000 - 3.4
20,800 / 2.3
7.7
35,000 - 3.4
20,800 / 2.3
7.7
35,000 - 3.4
20,800 / 2.3
7.7
35,000 - 3.4
20,800 / 2.3
7.7
Direct Drive
1 (10” x 9”)
12,00
Low Speed
2.50
⅓ - 890
0.068
Orifice
( 4) 14”x20”x2”
¾”
105.0
5.4
3 / 16
Direct Drive
1 (10” x 9”)
12,00
Low Speed
2.50
⅓ - 890
0.068
Orifice
( 4) 14”x20”x2”
¾”
105.0
5.4
3 / 16
Belt Drive
1 (11” x 10”)
12,00
--3.8
1.0 - 1725
0.068
Orifice
( 4) 14”x20”x2”
¾”
105.0
5.4
3 / 16
Belt Drive
1 (11” x 10”)
12,00
--1.9
1.0 - 1725
0.068
Orifice
( 4) 14”x20”x2”
¾”
105.0
5.4
3 / 16
Belt Drive
1 (11” x 10”)
12,00
--2.3
1.5 - 1725
0.068
Orifice
( 4) 14”x20”x2”
¾”
105.0
5.4
3 / 16
1 (10” x 9”)
-------
1 (10” x 9”)
-------
1 (11” x 10”)
1VL40 X ⅝
AK69 X 1
AX41
1 (11” x 10”)
1VL40 X ⅝
AK69 X 1
AX41
1 (11” x 10”)
1VL40 X ⅝
AK69 X 1
AX41
1
¼ / 1,090
22 / 4
3,800
18
1 / 22
0.055
1
¼ / 1,090
22 / 4
3,800
18
1 / 22
0.055
1
¼ / 1,090
22 / 4
3,800
18
1 / 22
0.055
1
¼ - 890
22 / 4
3,800
18
1 / 22
0.055
1
¼ - 1,075
22 / 4
3,800
18
1 / 22
0.055
208-230/1/60
1
16.7 / 79.0
⅓ / 2.5
¼ / 1.4
20.57
25
40
Locating Dimple
Locating Dimple
208-230/3/60
1
10.5 / 73.0
⅓ / 2.5
¼ / 1.4
14.35
17
25
Locating Dimple
Locating Dimple
208-230/3/60
1
10.5 / 73.0
1.0 / 3.8
¼ / 1.4
15.65
18
25
Locating Dimple
Locating Dimple
460/3/60
1
5.8 / 38.0
1.0 / 1.9
¼ / 0.8
8.47
10
15
Locating Dimple
Locating Dimple
575/3/60
1
3.8 / 36.5
1.5 / 2.3
¼ / 0.6
6.68
8
10
Locating Dimple
Locating Dimple
570
590
570
590
570
590
570
590
570
590
¹ Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
² May use fuses or HACR-type circuit breakers of the same size as noted.
Note: Always check the S&R plate for electrical data on the unit being installed.
SS-CPH36-60
www.goodmanmfg.com
3
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS — 4 TONS
Cooling Capacity
Total BTU/h
Sensible BTU/h
SEER / EER
Decibels
ARI Reference #s
Heating Capacity
BTU/h (47° F)
COP (47°F)
BTU/h (17° F)
COP (17°F)
HSPF
Evaporator Motor / Coil
Motor Type
Indoor Nominal CFM
Motor Speed Tap (Cooling)
Indoor motor FLA (Cooling)
Horsepower - RPM
Piston Size (Cooling)
Filter Size
Drain Size (NPT)
R-410A Refrigerant Charge (oz.)
Evaporator Coil Face Area (ft²)
Rows Deep / Fins per Inch
Belt Drive Evap Fan Data
# of Wheels (D x W)
Motor Sheave
Blower Sheave
Belt
Condenser Fan / Coil
Quantity of condenser Fan Motors
Horsepower - RPM
Fan Diameter / # Fan Blades
Outdoor Nominal CFM
Face Area (ft²)
Rows Deep / Fins per Inch
Piston Size (Heating)
Electrical Data
Voltage/Phase/ Frequency
Quantity of Compressors
Compressor RLA / LRA
Max External Static
Outdoor Fan RLA
Total Unit Amps
Min. Circuit Ampacity¹
Max. Overcurrent Protection (amps)²
Entrance Power Supply
Entrance Control Voltage
Operating Weight (lbs)
Ship Weight (lbs)
CPH048
***1D***
CPH048
***3D***
CPH048
***3B***
CPH048
***4B***
CPH048
***7B***
46,000
34,500
13 / 11.3
77.7
3012030
46,000
34,500
13 / 11.3
77.7
3009018
46,000
34,500
13 / 11.3
77.7
3009018
46,000
34,500
13 / 11.3
77.7
3009019
46,000
34,500
13 / 11.3
77.7
3009020
46,000
3.4
26,500
2.3
7.7
46,000
3.4
26,500
2.3
7.7
46,000
3.4
26,500
2.3
7.7
46,000
3.4
26,500
2.3
7.7
46,000
3.4
26,500
2.3
7.7
Direct Drive
1,600
Medium
2.87
½ - 1,000
0.076
( 4) 14”x20”x2”
¾”
185.0
7.8
4 / 16
Direct Drive
1,600
Medium
2.87
½ - 1,000
0.076
( 4) 14”x20”x2”
¾”
185.0
7.8
4 / 16
Belt Drive
1,600
--3.8
1.0 - 1,725
0.076
( 4) 14”x20”x2”
¾”
185.0
7.8
4 / 16
Belt Drive
1,600
--1.9
1.0 - 1,725
0.076
( 4) 14”x20”x2”
¾”
185.0
7.8
4 / 16
Belt Drive
1,600
--2.3
1.5 - 1,725
0.076
( 4) 14”x20”x2”
¾”
185.0
7.8
4 / 16
1 (10” x 9”)
-------
1 (10” x 9”)
-------
1 (11” x 10”)
VL44 X 5/8
AK66 X 1
AX41
1 (11” x 10”)
VL44 X 5/8
AK66 X 1
AX41
1 (11” x 10”)
VL44 X 5/8
AK66 X 1
AX41
1
¼ / 1,090
22 / 4
3,800
18.0
2 / 18
0.057
1
¼ / 1,090
22 / 4
3,800
18.0
2 / 18
0.057
1
¼ / 1,090
22 / 4
3,800
18.0
2 / 18
0.057
1
¼ - 890
22 / 4
3,800
18.0
2 / 18
0.057
1
¼ - 1,075
22 / 4
3,800
18.0
2 / 18
0.057
208-230/1/60
1
20 / 109
0.6”
1.40
24.1
29
45
Locating
Dimple
585
605
208-230/3/60
1
13.1 / 83.1
0.6”
1.40
17.4
21
30
Locating
Dimple
585
605
208-230/3/60
1
13.1 / 83.1
0.8”
1.40
18.3
22
30
Locating
Dimple
585
605
460/3/60
1
6.1 / 41
0.8”
0.80
8.8
10
15
Locating
Dimple
585
605
575/3/60
1
4.4 / 33
0.8”
0.60
7.3
8
10
Locating
Dimple
585
605
¹ Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
² May use fuses or HACR-type circuit breakers of the same size as noted.
Note: Always check the S&R plate for electrical data on the unit being installed.
4
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS — 5 TONS
Cooling Capacity
Total BTU/h
Sensible BTU/h
SEER / EER
Decibels
ARI Reference No.
Heating Capacity
BTU/h / COP (47° F)
BTU/h / COP (17° F)
HSPF
Evaporator Motor
Motor Type
Indoor Nominal CFM
Expansion Device
Piston Size (Cooling)
Filter Size
Drain Size (NPT)
R-410A Refrigerant Charge (oz.)
Evaporator Coil
Face Area (ft²)
Rows Deep/ Fins per Inch
Tube Diameter/ Material
Evaporator Fan
Standard Direct Drive (D x W) HP
Standard Belt Drive (D x W) HP
High-Static Belt Drive (D x W) HP
Condenser Fan / Coil
Horsepower / RPM
Fan Diameter/ # Fan Blades
Outdoor Nominal CFM
Face Area (ft²)
Rows Deep/ Fins per Inch
Tube Diameter/ Material
Piston Size (Heating)
Electrical Data
Voltage/ Frequency/ Phase
Compressor RLA / LRA
Indoor Blower HP / FLA
Indoor Blower LRA
Max External Static
Outdoor Fan HP / RLA
Min. Circuit Ampacity¹
Max. Overcurrent Protection (amps)²
Entrance Power Supply
Entrance Control Voltage
Operating Weight (lbs)
Ship Weight (lbs)
CPH060
***1D***
CPH060
***3D***
CPH060
***3B***
CPH060
***4B***
CPH060
***7B***
59,500
42,500
13 / 11.3
77.2
1487345
59,500
42,500
13 / 11.3
77.2
1487471
59,500
42,500
13 / 11.3
77.2
1487471
59,500
42,500
13 / 11.3
77.2
1487469
59,500
42,500
13 / 11.3
77.2
1487470
58,500 / 3.65
33,000 / 2.50
7.7
58,500 / 3.65
33,000
7.7
58,500 / 3.65
33,000
7.7
58,500 / 3.65
33,000
7.7
58,500 / 3.65
33,000 / 2.50
7.7
Direct
2,000
Piston
0.082
14” x 20” x 2”
¾”
185
Direct
2,000
Piston
0.082
14” x 20” x 2”
¾”
185
Belt
2,000
Piston
0.082
14” x 20” x 2”
¾”
185
Belt
2,000
Piston
0.082
14” x 20” x 2”
¾”
185
Belt
2,000
Piston
0.082
14” x 20” x 2”
¾”
185
7.8
4 / 16
5
/16”/ Copper
7.8
4 / 16
5
/16”/ Copper
7.8
4 / 16
5
/16”/ Copper
7.8
4 / 16
5
/16”/ Copper
7.8
4 / 16
5
/16”/ Copper
(11” X 10”) 1
-------
(11” X 10”) 1
-------
---(11” X 10”) 1
(11” X 10”) 1½
---(11” X 10”) 1
(11” X 10”) 1½
---(11” X 10”) 1½
----
¼ / 1,090
22 / 4
3,800
17½
2 / 18
5
/16”/ Copper
0.064
¼ / 1,090
22 / 4
3,800
17½
2 / 18
5
/16”/ Copper
0.064
¼ / 1,090
22 / 4
3,800
17½
2 / 18
5
/16”/ Copper
0.064
¼ / 1,090
22 / 4
3,800
17½
2 / 18
5
/16”/ Copper
0.064
¼ / 1,075
22 / 4
3,800
17½
2 / 18
5
/16”/ Copper
0.064
460 / 60 / 3
7.76 / 52
1.0 / 1.9
12
1.0
¼ / 0.80
12
20
575-3-60
5.7 / 38.9
1.5 / 2.3
12
1.0
¼ / 0.60
10
15
208-230 / 60 / 3 208-230 / 60 / 3 208-230 / 60 / 3
26.4 / 134
15.96 / 110
15.96 / 110
1.0 / 7.6
1.0 / 7.6
1.0 / 3.8
------24
0.9
0.9
1.0
¼ / 1.40
¼ / 1.40
¼ / 1.40
42
29
25
60
45
40
Locating Dimple
Locating Dimple
590
610
590
610
Locating Dimple
Locating Dimple
590
610
590
610
590
610
¹ Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
² May use fuses or HACR-type circuit breakers of the same size as noted.
Note: Always check the S&R plate for electrical data on the unit being installed.
SS-CPH36-60
www.goodmanmfg.com
5
PRODUCT SPECIFICATIONS
AIRFLOW DATA — DIRECT DRIVE — 3 TONS
Standard Direct Drive Motor — Down Shot
Standard Direct Drive Motor — Horizontal
Speed
Tap
CFM
Static
Amps
Watts
RPM
Speed
Tap
Low
873
960
1017
1071
1120
1164
0.6
0.5
0.4
0.3
0.2
0.1
1.34
1.42
1.49
1.53
1.59
1.63
299
312
325
335
346
354
899
857
810
775
720
663
Low
852
1037
1135
1237
1307
1365
1422
1469
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
1.54
1.70
1.81
1.90
2.00
2.07
2.16
2.24
344
379
405
424
443
461
477
494
1032
987
963
934
904
869
834
792
Med
855
1096
1219
1299
1396
1487
1552
0.9
0.8
0.7
0.6
0.5
0.4
0.3
1.91
2.09
2.19
2.27
2.37
2.47
2.55
406
452
478
499
526
547
566
1081
1045
1022
999
981
957
934
High
CFM
Static
Amps
Watts
RPM
878
979
1023
1088
1144
1207
0.6
0.5
0.4
0.3
0.2
0.1
1.35
1.44
1.51
1.56
1.61
1.62
300
320
330
340
350
353
892
839
792
745
692
639
925
1057
1164
1251
1324
1402
0.8
0.7
0.6
0.5
0.4
0.3
1.61
1.74
1.85
1.93
2.02
2.12
362
391
416
434
450
471
1011
975
943
914
881
851
Med
815
1072
1225
1330
1429
0.9
0.8
0.7
0.6
0.5
1.89
2.09
2.22
2.31
2.40
403
453
486
509
533
1070
1040
1011
987
966
High
Notes
Assumes dry coil with filter in place; SCFM correction for wet coil = 4%
Standard Belt Drive Down-Shot
ESP, In
H 2O
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
Turns Open
CFM
1515
1272
0
RPM
976
982
BHP
0.46
0.38
CFM
1427
1201
1
RPM
923
923
BHP
0.38
0.32
CFM
1384
1138
2
RPM
870
876
BHP
0.33
0.27
CFM
3
RPM
BHP
1553
1366
1094
816
816
823
0.34
0.29
0.23
CFM
4
RPM
BHP
1515
1314
1098
764
764
768
0.3
0.24
0.2
CFM
4
RPM
BHP
1406
1238
1039
766
769
769
0.27
0.23
0.19
CFM
1521
1356
1114
5
RPM
717
717
723
BHP
0.27
0.23
0.18
CFM
1393
1244
1045
5
RPM
713
713
717
BHP
0.24
0.21
0.17
Standard Belt Drive Horizontal
ESP, In
H 2O
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
6
Turns Open
CFM
1386
1169
859
0
RPM
976
975
981
BHP
0.42
0.35
0.27
CFM
1506
1328
1131
1
RPM
924
929
929
BHP
0.41
0.35
0.31
CFM
1472
1290
1070
2
RPM
872
874
875
BHP
0.35
0.31
0.25
CFM
3
RPM
BHP
1431
1268
1073
820
822
822
0.31
0.27
0.22
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
AIRFLOW DATA — DIRECT DRIVE — 4 TONS
Standard Direct Drive Motor — Down Shot
CFM
Static
Watts
RPM
1165
1307
1404
1495
1577
1659
1711
0.8
0.7
0.6
0.5
0.4
0.3
0.2
476
508
526
550
578
596
541
1014
980
954
925
898
865
832
1201
1358
1487
1589
1716
1820
0.9
0.8
0.7
0.6
0.5
0.4
560
594
620
642
668
692
1045
1021
997
979
956
932
Standard Direct Drive Motor — Horizontal
Speed
CFM
Static
Watts
RPM
Speed
Med
1307
1404
1495
1577
1659
1711
1771
0.7
0.6
0.5
0.4
0.3
0.2
0.1
508
526
550
578
596
541
558
980
954
925
898
865
832
804
Med
High
1285
1448
1551
1662
1705
1818
0.8
0.7
0.6
0.5
0.4
0.3
586
620
648
672
688
724
1035
1008
992
970
947
926
1867
0.2
734
903
Notes
Table represents dry coil without filter. To account for filter 0.08” should be added to measured ESP.
SCFM correction for wet coil = 4%.
Four-ton models are shipped from the factory with speed tap set on medium speed.
High
Standard Belt Drive Down-Shot
Turns Open
ESP, In
H 2O
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
0
CFM
RPM
1
BHP
CFM
RPM
2
BHP
CFM
RPM
3
BHP
CFM
RPM
4
5
CFM
RPM
BHP
RPM
BHP
1872
1720
0.52 1576
0.44 1334
0.37
887
887
892
892
1851 826
0.5 1665 831
0.45 1503 831
0.41
0.33
0.44
0.39
0.34
RPM
BHP
CFM
RPM
BHP
RPM
BHP
942
942
942
947
1839
0.54 1716
0.5 1617
0.47 1478
0.41
887
887
887
888
0.5 1706 832
0.45 1591 832
0.41 1445 837
0.37
0.4
0.37
0.32
1767 942
1818 992 0.59 1564 942
1624 997 0.51 1340 947
1739 1052 0.62 1423 1000 0.45
1842 1101 0.72 1551 1052 0.54
1653 1107 0.63 1316 1057 0.45
BHP
CFM
Standard Belt Drive Horizontal
Turns Open
ESP, In
H 2O
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
0
CFM
1862
1687
1548
1397
SS-CPH36-60
RPM
1
BHP
CFM
RPM
2
BHP
CFM
RPM
3
BHP
CFM
1851
1730
1742 997 0.56 1631
1662 997 0.53 1477
1777 1052 0.64 1519 1001 0.48
1101 0.73 1646 1052 0.58 1369 1002 0.42
1107 0.65 1491 1052 0.52
1107 0.59
1112 0.54
www.goodmanmfg.com
4
5
CFM
7
PRODUCT SPECIFICATIONS
AIRFLOW DATA — DIRECT DRIVE — 5 TONS
STANDARD DIRECT DRIVE MOTOR, DOWN SHOT
STANDARD DIRECT DRIVE MOTOR, HORIZONTAL
Standard
Cfm
Static
Amps
Watts
Rpm
765
820
905
965
1040
1120
1180
1255
1440
995
1060
1130
1190
1260
1315
1375
1445
1520
1675
1715
1785
1835
1895
1950
2005
2045
2030
1685
1725
1795
1835
1905
1990
2080
2150
2200
1910
1945
1985
2045
2090
2140
2190
2225
2275
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
2.15
2.05
2.00
1.90
1.80
1.70
1.60
1.50
1.70
2.60
2.60
2.45
2.40
2.30
2.20
2.05
2.00
1.90
4.90
4.70
4.60
4.50
4.40
4.20
4.05
3.95
3.80
5.40
5.30
5.15
5.05
4.95
4.80
4.70
4.50
4.40
6.10
5.95
5.90
5.75
5.57
5.50
5.30
5.20
5.10
245
230
225
215
200
180
175
160
180
310
300
290
270
260
240
220
220
205
615
590
580
560
540
530
510
490
470
690
665
665
640
635
600
590
565
545
810
790
775
750
730
705
685
665
640
910
870
830
790
730
690
645
595
580
935
905
855
810
765
730
680
645
595
1020
980
955
930
890
855
820
790
750
1030
1005
965
940
915
875
850
810
780
1065
1035
1005
975
940
915
880
850
820
Speed
Tap
T1
T2
T3
T4
T5
Standard
Cfm
Static
Amps
Watts
Rpm
730
785
850
915
980
1055
1120
1190
1250
955
1000
1070
1120
1185
1255
1305
1360
1415
1575
1620
1670
1750
1780
1835
1870
1900
1950
1605
1660
1690
1735
1786
1855
1905
1925
2015
1805
1890
1935
1990
2020
2070
2100
2140
2170
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
2.20
2.00
2.00
1.95
1.90
1.75
1.70
1.60
1.50
2.70
2.60
2.55
2.45
2.40
2.30
2.15
2.00
2.00
4.85
4.75
4.70
4.60
4.50
4.40
4.30
4.20
4.05
5.75
5.65
5.51
5.36
5.24
5.15
5.10
4.95
4.85
6.00
6.10
6.05
5.95
5.85
5.70
5.65
5.55
5.40
260
235
230
210
205
200
185
175
150
325
305
295
285
270
260
245
230
220
630
620
600
600
570
555
545
525
500
735
705
690
680
665
650
640
635
600
800
810
800
785
765
755
740
720
710
920
890
850
815
780
730
680
635
595
960
925
895
855
805
770
725
685
655
1065
1035
1010
975
940
920
890
865
830
1090
1055
1030
1000
975
950
925
900
875
1115
1090
1065
1040
1020
985
965
940
915
Speed
Tap
T1
T2
T3
T4
T5
Notes
Assumes dry coil with filter in place; SCFM correction for wet coil = 4%
Five-ton models are shipped from the factory with speed tap set on T4.
8
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
AIRFLOW DATA — BELT DRIVE — 5 TONS (CONT.)
Standard Belt Drive — Down Shot
Turns Open
0
1
2
3
CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM
2,399
2,317 1,008 0.75 2,172
2,627 1,157 1.06 2,498 1,115 0.94 2,310 1,066 0.79 2,040 1,014 0.69 1,868
2,392 1,162 1.02 2,215 1,121 0.87 2,025 1,071 0.73 1,752 1,019 0.63 1,465
2,154 1,173 0.93 1,920 1,126 0.78 1,665 1,077 0.65
1,748 1,184 0.83 1,569 1,135 0.7 1,199 1,084 0.56
1,371 1,190 0.74 1,077 1,143 0.62
ESP, In
H 2O
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
4
RPM
951
956
961
965
BHP
0.69
0.65
0.59
0.52
CFM
2,213
1,924
1,557
5
RPM BHP
895 0.6
899 0.55
902 0.49
High-Static, Belt Drive — Down Shot
Turns Open
0
1
2
3
4
5
CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP
ESP, In
H 2O
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
2,690
2,661 1,355 1.34 2,466
2,437 1,360 1.27 2,167
2,132 1,371 1.18 1,865
1,299
1,302
1,311
1,316
1.28
1.22
1.13
1.05
2,705
2,521
2,188
1,870
1,496
1,241
1,245
1,250
1,256
1,261
1.21
1.14
1.06
0.98
0.9
2,498
2,269
1,966
1,566
991
Standard Belt Drive — Down Shot
1.09
1.02
0.95
0.86
0.76
1,134
1,134
1,140
1,145
1,147
1,151
1.01
0.96
0.9
0.83
0.75
0.68
2,259
2,052
1,687
1,243
647
1,079
1,079
1,085
1,090
1,090
0.91
0.85
0.79
0.71
0.64
CPG060 High-Static, Belt Drive — Down Shot
1.8
1.8
1.6
1.6
1.4
Decreasing turns
1.4
Decreasing turns
1.2
ESP, In H 2O
ESP, In H 2O
1,189
1,195
1,196
1,200
1,206
2,551
2,235
2,015
1,613
1,130
615
1
0.8
0.6
1.2
1
0.8
5 Turns
0.6
0.4
0.4
5 Turns
0.2
0.2
0
0
0
500
1,000
1,500
2,000
2,500
3,000
0
Airflow, CFM
SS-CPH36-60
500
1,000
1,500
2,000
2,500
3,000
Airflow, CFM
www.goodmanmfg.com
9
PRODUCT SPECIFICATIONS
AIRFLOW DATA — BELT DRIVE — 5 TONS (CONT.)
Standard Belt Drive — Horizontal
Turns Open
ESP, In
H 2O
0
1
CFM RPM BHP CFM RPM BHP CFM
2,533
2,451 1,120 0.89 2,278
2,436 1,175 0.95 2,227 1,122 0.84 2,065
2,236 1,181 0.89 2,011 1,129 0.78 1,839
2,008 1,187 0.82 1,777 1,137 0.71 1,555
1,746 1,193 0.75 1,467 1,143 0.64 1,128
1,012 1,148 0.56 653
0.2
0.4
0.6
0.8
1
1.2
1.4
2
RPM
1,058
1,063
1,069
1,074
1,079
1,090
1,096
BHP
0.84
0.79
0.73
0.68
0.61
0.54
0.46
CFM
2,346
2,154
1,899
1,615
1,165
710
3
RPM
1,000
1,007
1,014
1,021
1,027
1,033
BHP
0.73
0.68
0.64
0.58
0.51
0.45
CFM
2,213
1,976
1,691
1,331
852
4
RPM
950
956
961
967
972
BHP
0.64
0.6
0.55
0.49
0.43
5
RPM
898
903
903
909
BHP
0.57
0.52
0.47
0.42
5
RPM
1,074
1,077
1,081
1,084
1,088
1,090
1,095
BHP
0.91
0.87
0.84
0.79
0.74
0.67
0.63
CFM
2,004
1,742
1,450
986
1.6
High-Static Belt Drive — Horizontal
Turns Open
0
1
2
3
4
CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM RPM BHP CFM
2,376
2,537 1,225 1.14 2,498 1,190 1.05 2,347 1,135 0.97 2,179
2,595 1,300 1.22 2,399 1,234 1.11 2,350 1,193 1.00 2,154 1,138 0.92 1,955
2,648 1,355 1.29 2,527 1,306 1.18 2,210 1,242 1.06 2,157 1,195 0.95 1,928 1,141 0.87 1,714
2,444 1,361 1.23 2,329 1,305 1.12 2,001 1,246 1.00 1,902 1,198 0.91 1,668 1,144 0.82 1,411
2,280 1,365 1.16 2,127 1,311 1.06 1,806 1,249 0.94 1,613 1,203 0.85 1,291 1,149 0.76 997
2,061 1,367 1.11 1,872 1,316 0.99 1,557 1,256 0.89 1,226 1,206 0.77 881 1,151 0.7 605
1,826 1,372 1.05 1,590 1,319 0.93 1,197 1,264 0.81 831 1,209 0.71
ESP, In
H 2O
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
High-Static, Belt Drive — Horizontal
1.8
1.8
1.6
1.6
1.4
1.4
Decreasing turns
1.2
ESP, In H 2O
ESP, In H 2O
Standard Belt Drive — Horizontal
1
0.8
0.6
0.4
Decreasing turns
1.2
1
0.8
0.6
5 Turns
0.4
5 Turns
0.2
0.2
0
0
0
500
1,000
1,500
2,000
2,500
3,000
0
Airflow, CFM
10
500
1,000
1,500
2,000
2,500
3,000
Airflow, CFM
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
EXPANDED HEATING DATA
3 TONS
Outdoor Ambient Temperature
65
60
55
50
47
45
40
35
30
25
20
17
15
10
5
0
-5
-10
MBh
44.0
41.7
39.2
36.6
35.0
33.9
31.5
29.1
25.9
23.9
22.0
20.8
20.0
18.0
15.9
13.9
11.9
9.7
T/R
33.9
32.1
30.2
28.3
27.0
26.2
24.3
22.4
20.0
18.5
17.0
16.1
15.5
13.9
12.3
10.7
9.2
7.5
kW
3.20
3.14
3.08
3.02
2.98
2.96
2.90
2.84
2.81
2.75
2.69
2.66
2.63
2.57
2.51
2.45
2.39
2.33
Amps
10.9
10.2
9.6
9.2
8.9
8.8
8.4
8.0
7.7
7.5
7.2
7.1
7.0
6.7
6.4
6.1
5.8
5.4
COP
4.03
3.89
3.73
3.56
3.44
3.36
3.18
3.00
2.70
2.55
2.40
2.29
2.23
2.05
1.86
1.66
1.45
1.22
Hi Pr
404
388
373
356
348
341
328
315
302
288
277
270
265
255
245
235
227
219
Lo Pr
183
170
159
146
138
133
122
109
98
88
77
72
69
58
50
43
37
29
Above information is for nominal CFM and 70 degree indoor dry bulb. Instantaneous capacity listed.
High pressure is measured at the liquid line gauge port connection
Amps = unit amps (comp.+fans)
Low pressure is measured at the compressor suction gauge port connection.
kW = Total system power
Design Super Heat 7°± 2 @ Suction Service Port 47 test condition
4 TONS
Outdoor Ambient Temperature
65
60
55
50
47
45
40
35
30
25
20
17
15
10
5
0
-5
-10
MBh
57.8
54.7
51.5
48.2
46.0
44.6
41.4
38.2
33.2
30.6
28.2
26.6
25.6
23.0
20.4
17.8
15.2
12.4
T/R
33.5
31.7
29.8
27.9
26.6
25.8
24.0
22.1
19.2
17.7
16.3
15.4
14.8
13.3
11.8
10.3
8.8
7.2
kW
4.03
3.96
3.88
3.81
3.77
3.73
3.66
3.59
3.39
3.32
3.25
3.21
3.18
3.11
3.04
2.97
2.90
2.83
COP
4.20
4.05
3.88
3.70
3.58
3.49
3.31
3.11
2.86
2.69
2.53
2.42
2.36
2.16
1.96
1.75
1.53
1.28
HI PR
409
392
377
360
352
345
332
319
305
291
280
273
268
258
248
238
230
221
LO PR
135
126
118
108
102
98
90
80
73
65
57
53
51
43
37
31
27
22
Above information is for nominal CFM and 70º F indoor dry bulb. Instantaneous capacity listed.
Design Superheat 7°± 2 @ suction access fittings; 47º test condition
5 TONS
Outdoor Ambient Temperature
65
60
55
50
47
45
40
35
30
25
20
17
15
10
5
0
-5
-10
MBh
73.6
69.7
65.6
61.3
58.6
56.7
52.7
48.6
41.4
38.2
35.2
33.2
32.0
28.7
25.5
22.2
18.9
15.5
∆T
33.2
31.5
29.6
27.7
26.4
25.6
23.8
22.0
18.7
17.3
15.9
15.0
14.5
13.0
11.5
10.0
8.6
7.0
kW
4.89
4.79
4.70
4.60
4.54
4.50
4.41
4.32
4.10
4.01
3.92
3.87
3.83
3.74
3.65
3.56
3.46
3.37
Amps
16.3
15.1
14.1
13.3
12.8
12.6
11.9
11.3
10.8
10.4
9.9
9.7
9.5
9.1
8.5
8.0
7.4
6.7
COP
4.41
4.26
4.09
3.90
3.77
3.69
3.50
3.30
2.95
2.79
2.63
2.52
2.44
2.25
2.04
1.83
1.60
1.35
EER
15.1
14.5
14.0
13.3
12.9
12.6
11.9
11.3
10.1
9.5
9.0
8.6
8.4
7.7
7.0
6.2
5.5
4.6
Hi Pr
407
390
375
358
350
343
330
317
304
290
278
272
267
257
247
237
228
220
Lo Pr
125
116
109
100
94
91
83
74
67
60
53
49
47
40
34
29
25
20
Calculations are based on nominal CFM and 70°F indoor dry bulb.
kW = Total system power
SS-CPH36-60
Design Super Heat 7°± 2 @ Suction Service Port 47 test condition
Amps = Outdoor unit amps (comp.+ fan)
www.goodmanmfg.com
11
PRODUCT SPECIFICATIONS
HEAT KIT ELECTRICAL DATA (BLOWER ONLY, HEAT MODE) — 3 TONS
Model and
Heat Kit Usage
MCA¹ @
208 / 240V
MOP² (amps)
@ 208 / 240V
Actual kW &
BTU @ 240V
Recommended
Airflow Range
CPH036***1D***
EHK1-10
EHK1-15
25
67 / 77
89 / 103
40
70 / 80
90 / 110
10
15
1250-1350 CFM
1400-1440 CFM
CPH036***3D***
EHK3-10
EHK3-15
17
41 / 47
54 / 62
25
45 / 50
60 / 70
10
15
1250-1350 CFM
1400-1440 CFM
CPH036***3B***
EHK3-10
EHK3-15
18
42 / 48
55 / 63
25
45 / 50
60 / 70
10
15
1250-1350 CFM
1400-1440 CFM
MCA¹
@ 480V
MOP² (amps)
@ 480V
Actual kW &
BTU @ 480V
Recommended
Airflow Range
10
25
33
15
25
35
10
15
1250-1350 CFM
1400-1440 CFM
MCA¹
@ 575V
MOP² (amps)
@ 575V
Actual kW &
BTU @ 575V
Recommended
Airflow Range
8
20
26
15
25
30
10
15
1400-1475 CFM
1575-1650 CFM
Model and
Heat Kit Usage
CPH036***4B***
EHK4-10
EHK4-15
Model and
Heat Kit Usage
CPH036***7B***
EHK7-10
EHK7-15
¹ Minimum Circuit Ampacity
² Maximum Overcurrent Protection device
KW CORRECTION FACTORS
kW Correction Factor for 1- & 3-Phase Units
Supply Voltage
Correction Factor
240
230
220
210
208
1
0.93
0.82
0.78
0.76
Minimum Airflow for Electric Heat
kW Correction Factor for 480V Units
Actual Voltage
460
440
430
Correction Factor
0.92
0.84
0.8
Heater Size (kW)
Minimum CFM
10
1,250
15
1,400
For other voltage use voltage² / 480²
kW Correction Factor for 575V Units
Supply Voltage
560
550
540
Correction Factor
0.95
0.91
0.88
Multiply rated kW by correction factor to get actual kW
12
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
HEAT KIT ELECTRICAL DATA (BLOWER ONLY, HEAT MODE) — 4 TONS
Model and
Heat Kit Usage
MCA¹ @
208 / 240V
MOP² (amps)
@ 208 / 240V
Actual kW &
BTU @ 240V
Recommended
Airflow Range
CPH048***1D***
EHK1-10
EHK1-15
EHK1-18
29
70 / 81
93 / 107
107 / 123
45
80 / 90
100 / 110
110 / 125
10
15
18
1400-1800 CFM
1575-1800 CFM
1575-1800 CFM
CPH048***3D***
EHK3-10
EHK3-15
EHK3-18
21
44 / 51
57 / 66
65 / 75
30
45 / 60
60 / 70
70 / 80
10
15
18
1400-1800 CFM
1575-1800 CFM
1575-1800 CFM
CPH048***3B***
EHK3-10
EHK3-15
EHK3-18
22
45 / 52
58 / 67
66 / 76
30
45 / 60
60 / 70
70 / 80
10
15
18
1400-1800 CFM
1575-1800 CFM
1575-1800 CFM
MCA¹
@ 480V
MOP² (amps)
@ 480V
Actual kW &
BTU @ 480V
Recommended
Airflow Range
10
25
33
37
15
30
35
40
10
15
18
1400-1800 CFM
1575-1800 CFM
1575-1800 CFM
MCA¹
@ 575V
MOP² (amps)
@ 575V
Actual kW &
BTU @ 575V
Recommended
Airflow Range
8
21
27
31
15
25
30
35
10
15
18
1400-1800 CFM
1575-1800 CFM
1575-1800 CFM
Model and
Heat Kit Usage
CPH048***4B***
EHK4-10
EHK4-15
EHK4-18
Model and
Heat Kit Usage
CPH048***7B***
EHK7-10
EHK7-15
EHK7-18
¹ Minimum Circuit Ampacity
² Maximum Overcurrent Protection device
KW CORRECTION FACTORS
kW Correction Factor for 1- & 3-Phase Units
Supply Voltage
240
230
220
210
Correction Factor
1
0.93
0.82
0.78
kW Correction Factor for 480V Units
Actual Voltage
460
440
Correction Factor
0.92
0.84
430
0.8
For other voltage use voltage² / 480²
kW Correction Factor for 575V Units
Supply Voltage
560
550
Correction Factor
0.95
0.91
208
0.76
MINIMUM AIRFLOW FOR ELECTRIC HEAT
Heater Size
10 kW
15 kW
18 kW
Minimum CFM
1,400
1,575
1,575
540
0.88
Multiply rated kW by correction factor to get actual kW.
SS-CPH36-60
www.goodmanmfg.com
13
PRODUCT SPECIFICATIONS
HEAT KIT ELECTRICAL DATA (BLOWER ONLY, HEAT MODE) — 5 TONS
Model and
Heat Kit Usage
CPH060***1D***
EHK1-10
EHK1-15
EHK1-20
MCA¹ @
208 / 240V
42
82 / 94
104 / 120
127 / 146
MOP² (amps)
@ 208 / 240V
60
90 / 110
110 / 125
150 / 150
Actual kW &
BTU @ 240V
Recommended
Airflow Range
Speed Tap
10
15
20
1750-2250 CFM
1750-2250 CFM
1850-2250 CFM
T3, T4, T5
T3, T4, T5
T5
CPH060***3D***
EHK3-10
EHK3-15
EHK3-20
EHK3-25
29
51 / 59
64 / 74
77 / 89
90 / 104
45
60 / 60
70 / 80
80 / 90
100 / 110
10
15
20
25
1750-2250 CFM
1750-2250 CFM
1850-2250 CFM
T3, T4, T5
T3, T4, T5
T5
CPH060***3B***
EHK3-10
EHK3-15
EHK3-20
EHK3-25
25
48 / 55
61 / 70
74 / 85
87 / 100
40
50 / 60
70 / 80
80 / 90
90 / 110
10
15
20
25
1750-2250 CFM
1750-2250 CFM
1850-2250 CFM
T3, T4, T5
T3, T4, T5
T5
Model and
Heat Kit Usage
CPH060***4B***
EHK4-10
EHK4-15
EHK4-20
EHK4-25
MCA¹
@ 480V
12
27
35
43
50
MOP² (amps)
@ 480V
20
30
40
45
60
Actual kW &
BTU @ 480V
Recommended
Airflow Range
10
15
20
25
1750-2250 CFM
1750-2250 CFM
1850-2250 CFM
---
Model and
Heat Kit Usage
CPH060***7B***
EHK7-10
EHK7-15
EHK7-20
EHK7-25
MCA¹
@ 575V
10
23
29
35
41
MOP² (amps)
@ 575V
15
25
30
40
45
Actual kW &
BTU @ 575V
Recommended
Airflow Range
10
15
20
25
1750-2250 CFM
1750-2250 CFM
1850-2250 CFM
---
¹ Minimum Circuit Ampacity
² Maximum Overcurrent Protection Device
KW CORRECTION FACTORS
kW Correction Factor for 1- & 3-Phase Units
Supply Voltage
240
230
220
210
Correction Factor
1
0.93
0.82
0.78
208
0.76
kW Correction Factor for 480V Units
Actual Voltage
460
440
430
Correction Factor
0.92
0.84
0.8
For other voltage use voltage² / 480²
kW Correction Factor for 575V Units
Supply Voltage
560
550
540
Correction Factor
0.95
0.91
0.88
MINIMUM AIRFLOW FOR ELECTRIC HEAT
Heater Size
Minimum CFM
10 kW
1,750
15 kW
1,750
20 kW
1,850
Multiply rated kW by correction factor to get actual kW
14
www.goodmanmfg.com
SS-CPH36-60
SS-CPH36-60
www.goodmanmfg.com
1050
1200
1350
1050
1200
1350
67
15
104
30.7 31.9 34.9
MBh
15
118
273
12
129
288
16
117
270
12
127
285
15
122
310
12
134
328
16
121
307
12
132
324
18
15
129
353
12
140
373
16
127
350
12
139
369
15
135
398
11
147
420
16
133
394
12
146
416
14
139
439
11
152
464
15
138
435
11
151
459
21
219
102
∆T
Hi PR
Lo PR
20
108
236
16
118
249
11
126
260
22
107
246
125
279
16
129
133
292
11
137
112
280
22
115
288
21
119
301
20
123
310
20
130
318
16
134
328
16
138
332
11
142
342
11
117
319
22
121
328
21
125
343
20
129
353
20
136
362
16
140
373
16
145
378
11
150
389
11
123
358
21
127
369
21
128
19
131
386
20
135
398
19
136
402
15
143
407
16
147
420
16
149
424
11
152
425
11
157
438
11
158
442
19
127
396
20
131
408
20
132
412
17
135
426
18
139
439
18
141
444
148
450
15
152
464
15
154
469
14
146
157
469
10
162
484
10
164
489
10
-
High and low pressures are measured at the liquid and suction service ports.
Design Superheat 7±2 °F, Design Subcooling 12 ±2 °F pressures measured @ the suction and liquid service ports, ARI 95 test conditions
114
265
20
118
301
11
151
20
373
134
-
0.78 0.69 0.53 0.34 0.81 0.72 0.55 0.35 0.83 0.74 0.56 0.36 0.85 0.76 0.58 0.37 0.88 0.79 0.60 0.39 0.89 0.80 0.60 0.39
111
288
16
142
11
393
126
11
445
31.3 32.2 34.8 37.4 30.5 31.4 34.0 36.5 29.8 30.7 33.2 35.6 29.1 29.9 32.4 34.8 27.6 28.4 30.8 33.0 25.6 26.3 28.5 30.6
130
273
19
130
15
377
-
422
S/T
122
254
21
122
19
357
141
392
MBh
112
268
11
144
20
332
129
-
15
-
-
-
-
-
-
-
-
-
-
-
-
105
257
16
135
11
345
122
403
17
0.78 0.66 0.45
25.2 26.1 28.6
130
404
17
0.81 0.68 0.47
27.3 28.3 31.0
131
408
16
0.85 0.71 0.49
71
Lo PR
243
19
124
15
331
-
382
-
67
21
116
19
313
135
355
12
63
226
138
20
291
124
-
16
-
-
-
-
-
-
-
-
-
-
-
59
28.1 29.1 31.9
∆T
130
11
304
116
358
19
0.78 0.65 0.45
27.2 28.2 30.8
125
366
18
0.81 0.67 0.47
29.4 30.5 33.4
127
369
17
0.85 0.71 0.49
-
71
Hi PR
119
15
291
-
339
-
67
0.81 0.72 0.55 0.35 0.84 0.75 0.57 0.36 0.86 0.77 0.58 0.37 0.88 0.79 0.60 0.38 0.92 0.82 0.62 0.40 0.93 0.83 0.63 0.40
112
19
276
128
315
12
63
S/T
131
20
256
118
-
16
-
-
-
-
-
-
-
-
-
-
-
59
30.3 31.4 34.4
106
123
10
271
111
315
19
0.75 0.63 0.43
28.6 29.6 32.5
120
325
18
0.78 0.65 0.45
31.0 32.1 35.2
121
328
18
0.82 0.68 0.47
-
71
33.9 34.9 37.7 40.5 33.1 34.1 36.9 39.6 32.3 33.2 36.0 38.6 31.5 32.4 35.1 37.7 29.9 30.8 33.3 35.8 27.7 28.5 30.9 33.2
113
15
259
-
298
-
67
MBh
246
124
277
12
63
Lo PR
20
228
∆T
Hi PR
113
-
16
-
-
-
-
-
-
-
-
-
-
-
59
31.9 33.1 36.2
0.84 0.76 0.57 0.37 0.88 0.78 0.59 0.38 0.90 0.80 0.61 0.39 0.93 0.83 0.63 0.40 0.96 0.86 0.65 0.42 0.97 0.87 0.66 0.42
106
277
19
0.73 0.61 0.42
29.3 30.4 33.3
114
285
18
0.75 0.63 0.44
31.7 32.9 36.1
115
288
18
0.79 0.66 0.46
-
71
34.9 35.9 38.9 41.7 34.1 35.1 38.0 40.7 33.3 34.2 37.1 39.8 32.4 33.4 36.2 38.8 30.8 31.7 34.4 36.9 28.6 29.4 31.8 34.2
-
262
-
67
S/T
117
243
12
63
MBh
107
-
16
-
-
-
-
-
-
-
-
-
-
-
59
32.7 33.9 37.1
101
247
19
0.71 0.59 0.41
30.0 31.1 34.1
110
251
18
0.73 0.61 0.43
32.5 33.7 36.9
111
254
18
0.77 0.64 0.45
-
71
Lo PR
233
-
67
115
18
12
63
105
217
16
59
33.5 34.7 38.0
95
Entering Indoor Wet Bulb Temperature
85
Outdoor Ambient Temperature
∆T
-
-
-
-
-
-
-
-
-
-
-
-
71
75
Hi PR
0.68 0.57 0.40
121
S/T
110
12
254
Lo PR
16
241
18
224
∆T
Hi PR
0.71 0.59 0.41
S/T
122
105
33.3 34.5 37.8
112
11
257
MBh
243
Lo PR
17
226
∆T
Hi PR
0.74 0.62 0.43
63
S/T
59
34.3 35.5 38.9
MBh
Airflow
IDB = Entering Indoor Dry Bulb Temperature
Shaded area reflects ACCA (TVA) conditions.
75
70
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 3 TONS
15
16
www.goodmanmfg.com
1050
1200
1350
1050
1200
1350
67
71
59
63
67
71
59
63
67
71
59
63
67
71
59
63
67
71
59
63
115
67
71
21
119
130
138
304
16
116
291
24
124
313
23
135
331
20
144
345
16
122
332
24
130
357
23
142
377
20
151
393
16
153
21
128
373
23
129
377
22
136
402
22
138
406
19
149
424
20
150
428
15
158
442
16
160
447
20
132
412
22
134
417
20
141
444
21
142
448
18
154
469
18
155
473
14
164
489
15
165
494
24
25
224
104
∆T
Hi PR
Lo PR
25
110
241
24
121
254
20
128
265
26
110
251
127
285
24
131
136
297
21
140
114
285
26
117
294
25
121
307
25
125
317
25
132
324
24
136
334
23
141
338
21
145
349
20
120
325
26
123
335
25
127
350
25
131
361
25
139
369
24
143
381
24
148
385
21
153
397
20
125
366
25
129
377
24
131
22
133
393
25
138
406
24
139
410
22
146
416
24
150
428
23
152
433
19
155
433
20
160
447
20
162
451
20
130
404
23
134
417
22
135
421
21
138
435
23
142
448
22
144
453
151
459
22
155
473
22
157
478
21
149
160
479
19
165
494
19
167
499
18
159
High and low pressures are measured at the liquid and suction service ports.
Design Superheat 7±2 °F, Design Subcooling 12 ±2 °F pressures measured @ the suction and liquid service ports, ARI 95 test conditions
117
270
25
120
307
20
154
22
381
137
15
474
0.89 0.86 0.78 0.63 0.93 0.89 0.81 0.65 0.95 0.92 0.83 0.67 0.98 0.95 0.85 0.69 1.00 0.98 0.89 0.72 1.00 0.99 0.89 0.72
113
294
23
145
20
401
128
19
455
32.4 33.0 34.6 36.9 31.6 32.2 33.8 36.0 30.9 31.5 32.9 35.1 30.1 30.7 32.1 34.3 28.6 29.2 30.5 32.6 26.5 27.0 28.3 30.2
132
278
25
133
23
385
154
21
430
S/T
124
259
25
125
23
364
144
22
400
MBh
114
273
20
147
23
338
132
16
429
107
262
23
138
19
352
124
20
411
Lo PR
248
24
126
23
338
147
23
390
25
119
24
320
138
24
362
231
141
23
297
126
16
381
∆T
133
19
310
119
20
366
Hi PR
121
22
297
140
23
346
0.93 0.89 0.81 0.65 0.96 0.93 0.84 0.68 0.98 0.95 0.86 0.70 1.00 0.98 0.89 0.72 1.00 1.00 0.92 0.75 1.00 1.00 0.93 0.75
114
24
281
131
24
322
S/T
134
24
261
120
16
335
108
126
19
276
113
20
321
35.1 35.7 37.4 39.9 34.3 34.9 36.6 39.0 33.4 34.1 35.7 38.1 32.6 33.3 34.8 37.2 31.0 31.6 33.1 35.3 28.7 29.3 30.6 32.7
115
22
265
134
23
304
MBh
251
126
24
283
Lo PR
24
233
∆T
Hi PR
115
16
294
0.97 0.94 0.85 0.69 1.00 0.97 0.88 0.71 1.00 1.00 0.90 0.73 1.00 1.00 0.93 0.75 1.00 1.00 0.96 0.78 1.00 1.00 0.97 0.79
109
20
282
36.1 36.8 38.6 41.1 35.3 36.0 37.7 40.2 34.4 35.1 36.8 39.2 33.6 34.2 35.9 38.3 31.9 32.5 34.1 36.4 29.6 30.1 31.6 33.7
127
23
267
S/T
119
24
248
MBh
109
16
262
103
20
252
Lo PR
23
238
24
221
∆T
Hi PR
0.85 0.80 0.65 0.49 0.88 0.83 0.67 0.50 0.91 0.85 0.69 0.52 0.93 0.88 0.71 0.53 0.97 0.91 0.74 0.55 0.98 0.92 0.75 0.56
112
291
20
143
15
397
31.8 32.5 34.7 37.1 31.1 31.7 33.9 36.3 30.3 31.0 33.1 35.4 29.6 30.2 32.3 34.5 28.1 28.7 30.7 32.8 26.0 26.6 28.4 30.4
131
276
23
131
19
381
S/T
123
256
24
123
22
361
MBh
113
271
16
145
22
335
106
259
19
136
15
349
Lo PR
246
22
125
19
334
23
117
22
317
228
140
23
294
∆T
131
15
307
Hi PR
120
19
294
0.88 0.83 0.67 0.50 0.92 0.86 0.70 0.52 0.94 0.88 0.72 0.54 0.97 0.91 0.74 0.55 1.00 0.94 0.77 0.57 1.00 0.95 0.77 0.58
113
22
278
S/T
132
23
259
107
124
15
273
34.5 35.2 37.6 40.2 33.7 34.4 36.8 39.3 32.9 33.6 35.9 38.4 32.1 32.8 35.0 37.4 30.5 31.1 33.3 35.5 28.2 28.8 30.8 32.9
114
19
262
MBh
248
Lo PR
22
231
∆T
Hi PR
0.93 0.87 0.71 0.53 0.96 0.90 0.73 0.55 1.00 0.92 0.75 0.56 1.00 0.95 0.78 0.58 1.00 1.00 0.81 0.60 1.00 1.00 0.81 0.61
63
105
S/T
59
95
Entering Indoor Wet Bulb Temperature
85
Outdoor Ambient Temperature
35.5 36.3 38.8 41.4 34.7 35.4 37.9 40.5 33.8 34.6 37.0 39.5 33.0 33.7 36.1 38.5 31.4 32.1 34.2 36.6 29.1 29.7 31.7 33.9
75
MBh
Airflow
IDB = Entering Indoor Dry Bulb Temperature
Shaded area reflects ARI Rating conditions.
85
80
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 3 TONS (CONT.)
SS-CPH36-60
SS-CPH36-60
www.goodmanmfg.com
59
45.1
0.75
17
3.17
231
109
43.8
0.72
18
3.15
229
108
40.4
0.69
18
3.08
222
105
45.8
0.86
20
3.20
234
110
44.5
0.82
21
3.17
231
109
41.1
0.79
21
3.10
224
106
Airflow
MBh
S/T
∆T
1800
kW
HI PR
LO PR
MBh
S/T
∆T
1600
kW
HI PR
LO PR
MBh
S/T
∆T
1400
kW
HI PR
LO PR
MBh
S/T
∆T
1800
kW
HI PR
LO PR
MBh
S/T
∆T
1600
kW
HI PR
LO PR
MBh
S/T
∆T
1400
kW
HI PR
LO PR
47.2
0.77
18
3.26
251
117
45.8
0.73
19
3.23
249
116
42.3
0.70
20
3.16
242
113
63
46.7
0.63
15
3.23
249
116
45.4
0.60
16
3.21
246
115
41.9
0.58
16
3.14
239
112
51.1
0.58
15
3.35
266
128
49.6
0.55
16
3.33
263
127
45.8
0.53
16
3.25
255
123
67
51.2
0.44
11
3.33
263
127
49.7
0.42
12
3.30
260
126
45.9
0.40
12
3.23
252
122
54.8
0.37
10
3.45
277
136
53.2
0.36
11
3.42
274
135
49.1
0.34
11
3.35
266
131
71
44.8
0.89
20
3.42
262
117
43.5
0.85
21
3.39
260
115
40.1
0.82
22
3.32
252
112
59
44.0
0.78
18
3.39
260
115
42.7
0.74
18
3.37
257
114
39.5
0.72
19
3.29
249
111
46.1
0.79
19
3.49
282
124
44.8
0.76
19
3.46
279
123
41.3
0.73
20
3.38
271
119
63
45.6
0.65
15
3.46
279
123
44.3
0.62
16
3.43
277
122
40.9
0.60
16
3.36
268
118
49.9
0.60
15
3.59
298
135
48.4
0.57
16
3.56
295
134
44.7
0.55
16
3.48
286
130
67
50.0
0.45
12
3.56
295
134
48.5
0.43
12
3.53
292
133
44.8
0.42
12
3.46
283
129
75
53.6
0.39
11
3.70
311
144
52.0
0.37
11
3.67
308
143
48.0
0.36
11
3.58
298
138
71
43.7
0.91
20
3.61
298
121
42.4
0.87
21
3.59
295
120
39.2
0.84
22
3.51
286
116
45.0
0.81
19
3.69
321
129
43.7
0.78
19
3.66
318
128
40.3
0.75
20
3.58
308
124
48.7
0.62
15
3.80
339
141
47.3
0.59
16
3.77
336
139
43.7
0.57
16
3.68
325
135
52.3
0.40
11
3.91
353
150
50.8
0.38
11
3.88
350
148
46.8
0.36
11
3.79
339
144
42.6
0.94
20
3.79
340
127
41.4
0.90
21
3.76
336
126
38.2
0.86
22
3.67
326
122
43.9
0.84
19
3.87
366
135
42.6
0.80
20
3.84
362
134
39.3
0.77
20
3.75
351
130
47.5
0.64
15
3.98
386
148
46.1
0.61
16
3.95
382
146
42.6
0.58
16
3.86
371
142
71
-
51.0
0.41
11
4.11
403
157
49.5
0.39
11
4.07
399
156
45.7
0.38
11
3.98
387
151
Outdoor Ambient Temperature
85
95
Entering Indoor Wet Bulb Temperature
59
63
67
71
59
63
67
43.0 44.5 48.8
41.9 43.5 47.6
0.80 0.67 0.46
0.83 0.69 0.48
18
15
12
18
15
12
3.59 3.66 3.77
3.76 3.84 3.95
295 318 335
336 362 382
120 128 139
126 134 146
41.7 43.2 47.4
40.7 42.2 46.2
0.76 0.64 0.44
0.79 0.66 0.46
18
16
12
18
16
12
3.56 3.63 3.74
3.73 3.81 3.92
292 315 332
333 358 378
119 126 138
125 133 145
38.5 39.9 43.7
37.6 38.9 42.7
0.74 0.61 0.43
0.76 0.63 0.44
19
16
12
19
16
12
3.48 3.55 3.65
3.65 3.72 3.83
284 305 322
323 347 367
115 123 134
121 129 140
40.5
0.97
20
3.94
382
133
39.3
0.93
21
3.91
378
132
36.3
0.90
21
3.82
367
128
59
39.8
0.86
17
3.91
378
132
38.7
0.82
18
3.88
374
131
35.7
0.79
18
3.79
363
127
41.7
0.87
19
4.02
411
142
40.5
0.83
19
3.99
407
140
37.4
0.80
20
3.89
395
136
63
41.3
0.72
15
3.99
407
140
40.1
0.68
16
3.95
403
139
37.0
0.66
16
3.86
391
135
45.1
0.66
15
4.14
434
155
43.8
0.63
16
4.11
430
153
40.5
0.61
16
4.01
417
149
67
45.2
0.50
11
4.11
430
153
43.9
0.47
12
4.08
426
152
40.5
0.46
12
3.98
413
147
105
48.5
0.42
11
4.27
453
165
47.0
0.40
11
4.24
448
163
43.4
0.39
11
4.14
435
158
71
37.5
0.98
19
4.06
422
138
36.4
0.94
20
4.03
418
137
33.6
0.90
20
3.94
405
132
59
36.9
0.86
16
4.03
418
137
35.8
0.82
17
4.00
414
135
33.1
0.80
17
3.91
401
131
38.6
0.88
17
4.15
454
147
37.5
0.84
18
4.12
450
145
34.6
0.81
18
4.02
436
141
63
38.2
0.72
14
4.11
450
145
37.1
0.69
15
4.08
445
144
34.3
0.66
15
3.99
432
140
41.8
0.67
14
4.28
480
160
40.6
0.63
15
4.24
475
159
37.5
0.61
15
4.14
461
154
67
41.9
0.50
11
4.24
475
159
40.7
0.48
11
4.21
470
157
37.5
0.46
11
4.11
456
152
115
44.9
0.43
10
4.41
500
171
43.6
0.41
10
4.38
495
169
40.2
0.39
10
4.27
481
164
71
-
IDB = Entering Indoor Dry Bulb Temperature
Shaded area reflects ACCA (TVA) conditions
High and low pressures are measured at the liquid and suction access fittings.
Design Superheat 7±2 °F & Design Subcooling 12 ±2 °F pressures measured @ the suction and liquid access fittings; ARI 95° test conditions
75
70
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 4 TONS
17
18
www.goodmanmfg.com
59
46.7
0.94
22
3.22
236
111
45.3
0.90
23
3.20
234
110
41.8
0.86
24
3.13
227
107
47.5
0.98
24
3.24
238
113
46.1
0.94
25
3.22
236
111
42.5
0.91
25
3.15
229
108
Airflow
MBh
S/T
∆T
1800
kW
HI PR
LO PR
MBh
S/T
∆T
1600
kW
HI PR
LO PR
MBh
S/T
∆T
1400
kW
HI PR
LO PR
MBh
S/T
∆T
1800
kW
HI PR
LO PR
MBh
S/T
∆T
1600
kW
HI PR
LO PR
MBh
S/T
∆T
1400
kW
HI PR
LO PR
48.4
0.95
23
3.30
257
120
47.0
0.91
24
3.28
254
119
43.4
0.87
25
3.21
246
115
63
47.7
0.88
21
3.28
254
119
46.3
0.84
22
3.26
251
117
42.7
0.81
23
3.19
244
114
50.7
0.86
22
3.40
271
131
49.2
0.82
23
3.38
268
129
45.4
0.79
24
3.30
260
126
67
50.9
0.72
19
3.38
268
129
49.5
0.68
19
3.35
266
128
45.6
0.66
20
3.28
258
124
54.1
0.70
19
3.50
283
139
52.5
0.66
20
3.47
280
138
48.5
0.64
20
3.40
271
134
71
54.4
0.54
15
3.47
280
138
52.9
0.51
16
3.45
277
136
48.8
0.49
16
3.37
269
132
46.4
1.00
24
3.47
268
119
45.0
0.97
25
3.44
265
118
41.5
0.94
26
3.37
257
114
59
45.6
1.00
23
3.44
265
118
44.2
0.93
24
3.42
262
117
40.8
0.90
24
3.34
254
113
47.3
0.98
24
3.54
288
127
45.9
0.94
25
3.51
285
125
42.4
0.91
25
3.43
276
121
63
46.6
0.91
22
3.51
285
125
45.2
0.87
23
3.49
282
124
41.7
0.84
23
3.41
274
120
49.5
0.89
22
3.64
304
138
48.1
0.85
23
3.62
301
137
44.4
0.82
24
3.53
292
133
67
49.7
0.74
19
3.62
301
137
48.3
0.71
20
3.59
298
135
44.6
0.68
20
3.51
289
131
75
52.8
0.72
19
3.75
317
147
51.3
0.69
20
3.72
314
146
47.3
0.66
21
3.64
304
141
71
53.2
0.56
15
3.72
314
146
51.6
0.53
16
3.70
311
144
47.7
0.51
16
3.61
301
140
45.3
1.00
23
3.67
304
124
43.9
1.00
25
3.64
301
122
40.6
0.96
26
3.56
292
119
46.1
1.00
24
3.74
327
131
44.8
0.96
25
3.72
324
130
41.3
0.93
25
3.63
314
126
48.3
0.91
22
3.86
346
144
46.9
0.87
23
3.83
342
142
43.3
0.84
24
3.74
332
138
51.6
0.74
19
3.97
361
153
50.1
0.71
20
3.94
357
151
46.2
0.68
21
3.85
346
147
44.2
1.00
23
3.85
347
130
42.9
1.00
25
3.82
343
129
39.6
0.99
26
3.73
333
125
45.0
1.00
23
3.93
373
138
43.7
0.99
25
3.90
369
137
40.3
0.96
25
3.81
358
133
47.1
0.94
23
4.05
394
151
45.8
0.90
24
4.01
390
149
42.2
0.86
24
3.92
378
145
50.3
0.76
20
4.17
411
161
48.8
0.73
20
4.14
407
159
45.1
0.70
21
4.04
394
154
Outdoor Ambient Temperature
85
95
Entering Indoor Wet Bulb Temperature
59
63
67
71
59
63
67
71
44.5 45.5 48.6 51.9 43.4 44.3 47.4 50.6
1.00 0.94 0.76 0.57 1.00 0.97 0.79 0.59
23
22
19
15
22
22
19
15
3.64 3.72 3.83 3.94 3.82 3.90 4.01 4.14
301 324 342 357 343 369 390 407
122 130 142 151 129 137 149 159
43.2 44.1 47.2 50.4 42.1 43.1 46.0 49.2
0.95 0.89 0.73 0.54 0.98 0.92 0.75 0.56
24
23
20
16
24
23
20
16
3.62 3.69 3.80 3.91 3.79 3.87 3.98 4.11
298 321 339 353 340 366 386 403
121 129 141 150 127 135 148 157
39.9 40.7 43.5 46.5 38.9 39.7 42.5 45.4
0.92 0.86 0.70 0.52 0.95 0.89 0.72 0.54
24
23
20
16
24
23
20
16
3.53 3.60 3.71 3.82 3.70 3.78 3.89 4.01
289 311 329 343 329 355 374 391
118 125 136 145 123 131 143 153
42.0
1.00
21
4.00
390
136
40.7
1.00
23
3.97
386
135
37.6
1.00
25
3.87
374
131
59
41.2
1.00
21
3.97
386
135
40.0
1.00
23
3.94
382
133
36.9
0.98
24
3.84
371
129
42.8
1.00
22
4.08
420
145
41.5
1.00
24
4.05
415
143
38.3
0.99
25
3.95
403
139
63
42.1
1.00
22
4.05
415
143
40.9
0.96
22
4.02
411
142
37.8
0.92
23
3.92
399
138
44.8
0.98
22
4.21
443
158
43.5
0.93
23
4.17
439
156
40.1
0.90
24
4.07
425
152
67
45.0
0.82
19
4.17
439
156
43.7
0.78
20
4.14
434
155
40.3
0.75
20
4.04
421
150
105
47.8
0.79
19
4.34
462
168
46.4
0.76
20
4.30
457
167
42.8
0.73
20
4.20
444
162
71
48.1
0.61
15
4.30
457
167
46.7
0.58
16
4.27
453
165
43.1
0.56
16
4.17
439
160
38.9
1.00
20
4.13
431
141
37.7
1.00
22
4.09
426
139
34.8
1.00
23
4.00
414
135
59
38.2
1.00
20
4.09
426
139
37.1
1.00
21
4.06
422
138
34.2
0.99
22
3.97
410
134
39.6
1.00
20
4.21
464
150
38.5
1.00
22
4.18
459
148
35.5
1.00
23
4.08
445
144
63
39.0
1.00
20
4.18
459
148
37.9
0.96
21
4.15
454
147
35.0
0.93
21
4.05
441
142
41.5
0.98
21
4.34
489
163
40.3
0.94
22
4.31
485
162
37.2
0.91
22
4.21
470
157
67
41.7
0.82
18
4.31
485
162
40.5
0.78
18
4.28
480
160
37.4
0.76
19
4.17
465
155
115
44.3
0.80
18
4.48
510
174
43.0
0.76
19
4.45
505
172
39.7
0.73
19
4.34
490
167
71
44.6
0.62
14
4.45
505
172
43.3
0.59
15
4.41
500
171
39.9
0.57
15
4.31
485
166
IDB = Entering Indoor Dry Bulb Temperature
Shaded area reflects ARI Rating conditions
High and low pressures are measured at the liquid and suction access fittings.
Design Superheat 7±2 °F & Design Subcooling 12 ±2 °F pressures measured @ the suction and liquid access fittings; ARI 95° test conditions
85
80
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 4 TONS (CONT.)
SS-CPH36-60
SS-CPH36-60
www.goodmanmfg.com
59
58.4
0.75
17
4.00
10.5
244
105
56.7
0.71
18
3.97
10.4
242
104
52.3
0.69
18
3.87
10.2
234
101
59.4
0.85
20
4.03
10.6
246
106
57.7
0.81
21
4.00
10.5
244
105
53.2
0.78
21
3.90
10.3
237
102
Airflow
MBh
S/T
∆T
2306 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
2050 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
1794 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
2306 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
2050 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
1794 kW
Amps
Hi Pr
Lo Pr
61.2
0.76
19
4.11
10.9
265
113
59.4
0.73
19
4.08
10.8
263
112
54.8
0.70
20
3.99
10.5
255
109
63
60.5
0.62
15
4.08
10.8
263
112
58.8
0.60
16
4.05
10.7
260
111
54.2
0.57
16
3.95
10.4
252
108
66.2
0.58
15
4.24
11.2
280
124
64.3
0.55
16
4.21
11.1
277
122
59.3
0.53
16
4.11
10.8
269
119
67
66.3
0.43
11
4.21
11.1
277
122
64.4
0.41
12
4.18
11.0
275
121
59.4
0.40
12
4.08
10.7
266
118
71.0
0.37
10
4.38
11.6
292
132
69.0
0.35
11
bb
11.5
289
130
63.7
0.34
11
4.24
11.2
281
126
71
58.0
0.88
20
4.34
11.5
277
112
56.3
0.84
21
4.30
11.4
274
111
52.0
0.81
22
4.20
11.1
266
108
59
57.0
0.78
18
4.30
11.4
274
111
55.4
0.74
18
4.27
11.3
271
110
51.1
0.71
19
4.17
11.0
263
107
59.7
0.79
19
4.43
11.7
298
120
58.0
0.75
20
4.40
11.6
295
118
53.5
0.72
20
4.29
11.3
286
115
63
59.1
0.65
15
4.39
11.6
295
118
57.4
0.62
16
4.36
11.5
292
117
53.0
0.60
16
4.25
11.2
283
114
64.7
0.60
15
4.57
12.1
314
131
62.8
0.57
16
4.54
12.0
311
129
57.9
0.55
16
4.43
11.7
302
125
67
64.8
0.45
12
4.53
12.0
311
129
62.9
0.43
12
4.50
11.9
308
128
58.1
0.41
12
4.39
11.6
299
124
75
69.4
0.38
11
4.72
12.5
328
139
67.4
0.37
11
4.68
12.4
325
138
62.2
0.35
11
4.57
12.1
315
134
71
56.6
0.90
20
4.61
12.4
315
117
55.0
0.86
21
4.57
12.3
311
116
50.7
0.83
22
4.46
12.0
302
112
58.3
0.81
19
4.71
12.7
338
124
56.6
0.77
20
4.67
12.6
335
123
52.2
0.74
20
4.56
12.3
325
119
63.1
0.61
15
4.86
13.1
357
136
61.3
0.58
16
4.82
13.0
354
134
56.6
0.56
16
4.70
12.7
343
130
67.7
0.39
11
5.02
13.6
373
145
65.8
0.38
11
4.98
13.5
369
143
60.7
0.36
11
4.86
13.1
358
139
56.9
0.83
19
4.96
13.6
386
131
55.2
0.80
20
4.92
13.5
382
129
51.0
0.77
20
4.79
13.1
370
125
61.6
0.63
16
5.12
14.0
407
143
59.8
0.60
16
5.08
13.9
403
141
55.2
0.58
16
4.95
13.5
391
137
66.1
0.41
11
5.29
14.5
425
152
64.2
0.39
11
5.25
14.4
420
150
59.2
0.37
11
5.11
14.0
408
146
71
52.5
0.97
20
5.05
14.1
403
129
51.0
0.92
21
5.01
14.0
399
127
47.0
0.89
21
4.89
13.6
387
124
59
51.6
0.85
18
5.01
14.0
399
127
50.1
0.81
18
4.97
13.8
395
126
46.3
0.78
19
4.85
13.5
383
122
54.0
0.87
19
5.17
14.4
434
137
52.5
0.83
19
5.12
14.3
429
136
48.4
0.80
20
5.00
13.9
417
131
63
53.5
0.71
15
5.12
14.3
429
135
51.9
0.68
16
5.08
14.2
425
134
47.9
0.65
16
4.95
13.8
412
130
58.5
0.66
15
5.34
14.9
458
149
56.8
0.63
16
5.29
14.8
453
148
52.4
0.60
16
5.16
14.4
440
144
67
58.6
0.49
12
5.29
14.8
453
148
56.9
0.47
12
5.25
14.6
449
146
52.5
0.45
12
5.12
14.2
435
142
105
62.8
0.42
11
5.52
15.5
478
159
61.0
0.40
11
5.47
15.3
473
158
56.3
0.39
11
5.33
14.9
459
153
71
48.6
0.98
19
5.23
14.9
445
133
47.2
0.93
20
5.19
14.8
441
132
43.6
0.90
20
5.06
14.4
428
128
59
47.8
0.86
16
5.19
14.8
441
132
46.4
0.82
17
5.14
14.6
436
130
42.8
0.79
17
5.01
14.2
423
127
50.1
0.87
17
5.35
15.3
479
142
48.6
0.83
18
5.30
15.1
474
140
44.9
0.80
18
5.17
14.7
460
136
63
49.6
0.72
14
5.30
15.1
474
140
48.1
0.68
15
5.26
15.0
470
139
44.4
0.66
15
5.13
14.6
456
135
54.2
0.66
14
5.52
15.8
506
155
52.6
0.63
15
5.48
15.6
501
153
48.6
0.61
15
5.34
15.2
486
148
67
54.3
0.50
11
5.48
15.6
501
153
52.7
0.47
11
5.43
15.5
496
151
48.7
0.46
11
5.29
15.1
481
147
115
58.2
0.43
10
5.71
16.4
528
165
56.5
0.41
10
5.66
16.2
523
163
52.1
0.39
10
5.52
15.8
507
158
71
-
Shaded area is ARI Rating Conditions
Design Super Heat 9 ±3 °F @ Suction Service port, ARI 95 test conditions
55.2
0.93
21
4.85
13.3
358
123
53.6
0.89
21
4.81
13.1
355
122
49.5
0.86
22
4.69
12.8
344
118
Outdoor Ambient Temperature
85
95
Entering Indoor Wet Bulb Temperature
59
63
67
71
59
63
67
55.7 57.7 63.2
54.3 56.3 61.7
0.80 0.66 0.46
0.82 0.69 0.47
18
15
12
18
15
12
4.57 4.67 4.82
4.81 4.92 5.08
12.3 12.6 13.0
13.1 13.5 13.9
311 335 354
355 382 403
116 123 134
122 129 141
54.1 56.0 61.4
52.7 54.7 59.9
0.76 0.63 0.44
0.78 0.65 0.45
18
16
12
19
16
12
4.54 4.63 4.78
4.77 4.88 5.03
12.2 12.5 12.9
13.0 13.3 13.8
308 332 350
351 378 399
115 122 133
120 128 140
49.9 51.7 56.7
48.7 50.5 55.3
0.73 0.61 0.42
0.75 0.63 0.44
19
16
12
19
16
12
4.42 4.52 4.66
4.65 4.75 4.91
11.9 12.2 12.6
12.7 13.0 13.4
299 322 340
341 367 387
111 118 129
117 124 136
IDB: Entering Indoor Dry Bulb Temperature
High and low pressures are measured at the liquid and suction service valves.
75
70
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 5 TONS
19
20
Airflow
MBh
S/T
∆T
2306 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
2050 kW
Amps
Hi Pr
Lo Pr
MBh
S/T
∆T
1794 kW
Amps
Hi Pr
Lo Pr
59
60.4
0.93
22
4.06
10.7
249
108
58.7
0.89
23
4.03
10.6
247
106
54.2
0.86
24
3.93
10.4
239
103
63
61.8
0.87
22
4.15
11.0
268
114
60.0
0.83
22
4.12
10.9
265
113
55.4
0.80
23
4.02
10.6
257
110
67
66.0
0.71
19
4.28
11.3
283
125
64.1
0.68
20
4.24
11.2
280
124
59.1
0.65
20
4.14
10.9
272
120
71
70.5
0.53
15
4.42
11.7
295
133
68.5
0.51
16
4.38
11.6
292
132
63.2
0.49
16
4.27
11.3
283
128
59
59.0
0.97
23
4.37
11.6
279
114
57.3
0.92
24
4.34
11.5
277
112
52.9
0.89
24
4.23
11.2
268
109
63
60.3
0.91
22
4.47
11.8
301
121
58.6
0.86
23
4.43
11.7
298
120
54.1
0.83
23
4.32
11.4
289
116
67
64.5
0.74
19
4.61
12.2
317
132
62.6
0.70
20
4.57
12.1
314
131
57.8
0.68
20
4.46
11.8
305
127
75
71
68.9
0.55
15
4.76
12.7
331
141
66.9
0.53
16
4.72
12.5
328
139
61.7
0.51
16
4.61
12.2
318
135
Outdoor Ambient Temperature
85
95
Entering Indoor Wet Bulb Temperature
59
63
67
71
59
63
67
71
57.6 58.9 62.9 67.3 56.2 57.5 61.4 65.6
1.00 0.93 0.76 0.57 1.00 0.96 0.78 0.58
23
22
19
15
22
22
19
15
4.65 4.75 4.90 5.07 4.89 5.00 5.16 5.33
12.5 12.8 13.3 13.7 13.4 13.7 14.1 14.7
318 342 361 377 362 389 411 429
118 126 137 146 124 132 144 153
56.0 57.2 61.1 65.3 54.6 55.8 59.6 63.7
0.95 0.89 0.72 0.54 0.98 0.92 0.74 0.56
24
23
20
16
24
23
20
16
4.61 4.71 4.86 5.02 4.85 4.96 5.12 5.29
12.4 12.7 13.1 13.6 13.3 13.6 14.0 14.5
315 339 357 373 358 386 407 425
117 124 136 145 123 131 143 152
51.6 52.8 56.4 60.3 50.4 51.5 55.0 58.8
0.91 0.85 0.70 0.52 0.94 0.88 0.72 0.54
24
23
20
16
24
23
20
16
4.50 4.59 4.74 4.90 4.73 4.83 4.99 5.16
12.1 12.4 12.8 13.2 12.9 13.2 13.6 14.1
305 328 347 362 348 374 395 412
113 121 132 140 119 127 138 147
59
53.4
1.00
21
5.10
14.2
407
130
51.9
1.00
23
5.05
14.1
403
129
47.9
0.98
24
4.93
13.7
391
125
63
54.6
1.00
22
5.21
14.6
438
138
53.0
0.95
23
5.17
14.4
434
137
48.9
0.92
23
5.04
14.0
421
133
67
58.3
0.81
19
5.38
15.0
463
151
56.6
0.77
20
5.34
14.9
458
149
52.3
0.75
20
5.20
14.5
444
145
105
71
62.3
0.61
15
5.56
15.6
483
161
60.5
0.58
16
5.52
15.5
478
159
55.9
0.56
16
5.38
15.0
463
154
59
49.5
1.00
20
5.27
15.0
450
134
48.0
1.00
22
5.23
14.9
445
133
44.3
0.98
22
5.10
14.5
432
129
63
50.6
1.00
20
5.39
15.4
484
143
49.1
0.96
21
5.35
15.3
479
142
45.3
0.92
21
5.21
14.9
465
137
67
54.0
0.82
18
5.57
15.9
511
156
52.4
0.78
18
5.53
15.8
506
155
48.4
0.75
19
5.38
15.3
491
150
115
71
57.7
0.61
14
5.76
16.5
533
166
56.1
0.58
15
5.71
16.4
528
165
51.7
0.56
15
5.57
15.9
512
160
MBh 61.5 62.7 65.7 70.1 60.1 61.2 64.1 68.4 58.6 59.8 62.6 66.8 57.2 58.3 61.1 65.2 54.4 55.4 58.0 61.9 50.3 51.3 53.8 57.3
S/T
0.98 0.94 0.85 0.69 1.00 0.98 0.88 0.72 1.00 1.00 0.90 0.73 1.00 1.00 0.93 0.76 1.00 1.00 0.97 0.79 1.00 1.00 0.98 0.79
∆T
24
24
22
19
24
24
23
20
23
24
23
20
23
23
23
20
22
22
22
19
20
20
21
18
4.09 4.18 4.31 4.45 4.41 4.50 4.65 4.80 4.69 4.79 4.94 5.11 4.93 5.04 5.21 5.38 5.14 5.25 5.43 5.61 5.32 5.44 5.62 5.81
2306 kW
Amps 10.8 11.1 11.4 11.8 11.7 11.9 12.3 12.8 12.7 13.0 13.4 13.9 13.5 13.8 14.3 14.8 14.3 14.7 15.2 15.7 15.2 15.6 16.1 16.7
Hi Pr 251 271 286 298 282 304 321 334 321 345 365 380 365 393 415 433 411 442 467 487 454 489 516 538
Lo Pr 109 116 126 134 115 122 133 142 119 127 138 147 125 133 145 155 131 140 152 162 136 144 158 168
MBh 59.7 60.9 63.7 68.0 58.3 59.5 62.3 66.4 56.9 58.0 60.8 64.8 55.5 56.6 59.3 63.3 52.8 53.8 56.3 60.1 48.9 49.8 52.2 55.7
S/T
0.93 0.90 0.81 0.66 0.97 0.93 0.84 0.68 0.99 0.96 0.86 0.70 1.00 0.99 0.89 0.72 1.00 1.00 0.92 0.75 1.00 1.00 0.93 0.76
∆T
25
25
23
20
25
25
24
20
25
25
24
20
25
25
24
21
24
24
23
20
22
22
22
19
4.06 4.15 4.28 4.42 4.37 4.47 4.61 4.76 4.65 4.75 4.90 5.07 4.89 5.00 5.16 5.33 5.10 5.21 5.38 5.56 5.27 5.39 5.57 5.76
85 2050 kW
Amps 10.7 11.0 11.3 11.7 11.6 11.8 12.2 12.7 12.5 12.8 13.3 13.7 13.4 13.7 14.1 14.7 14.2 14.6 15.0 15.6 15.0 15.4 15.9 16.5
Hi Pr 249 268 283 295 279 301 317 331 318 342 361 377 362 389 411 429 407 438 463 483 450 484 511 533
Lo Pr 108 114 125 133 114 121 132 141 118 126 137 146 124 132 144 153 130 138 151 161 134 143 156 166
MBh 55.1 56.2 58.8 62.8 53.8 54.9 57.5 61.3 52.6 53.6 56.1 59.9 51.3 52.3 54.7 58.4 48.7 49.6 52.0 55.5 45.1 46.0 48.2 51.4
S/T
0.90 0.87 0.78 0.64 0.93 0.90 0.81 0.66 0.96 0.92 0.83 0.68 0.99 0.95 0.86 0.70 1.00 0.99 0.89 0.72 1.00 1.00 0.90 0.73
∆T
25
25
24
20
26
25
24
21
26
25
24
21
26
25
24
21
25
25
24
21
23
23
22
19
3.97 4.05 4.18 4.31 4.27 4.36 4.50 4.64 4.53 4.63 4.78 4.94 4.77 4.87 5.03 5.20 4.97 5.08 5.25 5.42 5.14 5.26 5.43 5.61
1794 kW
Amps 10.4 10.7 11.0 11.4 11.3 11.5 11.9 12.3 12.2 12.5 12.9 13.4 13.0 13.3 13.8 14.3 13.8 14.2 14.6 15.2 14.6 15.0 15.5 16.1
Hi Pr 242 260 274 286 271 292 308 321 308 332 350 365 351 378 399 416 395 425 449 468 436 470 496 517
Lo Pr 104 111 121 129 110 117 128 136 115 122 133 142 120 128 140 149 126 134 146 156 130 139 151 161
IDB: Entering Indoor Dry Bulb Temperature
Shaded area is ARI Rating Conditions
High and low pressures are measured at the liquid and suction service valves.
Design Super Heat 9 ±3 °F @ Suction Service port, ARI 95 test conditions
80
IDB
65
PRODUCT SPECIFICATIONS
EXPANDED COOLING DATA — 5 TONS (CONT.)
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
DIMENSIONS
Downflow
Horizontal
L
K
S
V
X
Y
I
U
R
W
T
N
O
P
Q
M
J
H
G
E
D
C
B
A
F
Z
Point
A
B
C
D
E
F
G
H
I
J
K
L
M
SS-CPH36-60
Dimension
(“)
3½
2⅝
11
17
4¾
41½
3
12
75⅛
25
36⅜
40⅞
7 1/16
www.goodmanmfg.com
Point
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Dimension
(“)
17
7⅜
11
4⅞
1¾
25
4½
7½
12
4½
82¼
81¼
47⅜
21
PRODUCT SPECIFICATIONS
UNIT CLEARANCES
Maintain an adequate clearance around the unit for
safety, service, maintenance, and proper unit operation.
Leave a total clearance of 75” on the main control panel
side of the unit for possible removal of fan shaft, coil,
electric heat, and gas furnace. Leave a clearance of 48” on
all other sides of the unit for possible compressor removal
or service access, and to ensure proper ventilation
and condenser airflow. Do not install the unit
beneath any obstruction. Install the unit
away from all building exhausts to
inhibit ingestion of exhaust air
into the unit’s fresh-air intake.
ELECTRICAL ENTRANCE LOCATIONS
8½”
High-Voltage Entrance
8⅝”
Low-Voltage Entrance
2¾”
22
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
ROOF CURB INSTALLATION — RIGGING
Provisions for forks have been included in the unit base frame. No
other fork locations are approved.
• Unit must be lifted by the four lifting holes located at the base
frame corners.
• Lifting cables should be attached to the unit with shackles.
• The distance between the crane hook and the top of the unit must
not be less than 60”.
• Two spreader bars must span over the unit to prevent damage to
the cabinet by the lift cables. Spreader bars must be of sufficient
length so that cables do not come in contact with the unit during
transport. Remove wood struts mounted beneath unit base frame
before setting unit on roof curb. These struts are intended to protect
unit base frame from fork lift damage. To remove the struts, extract
the sheet metal retainers and pull the struts through the base of the
unit. Refer to rigging label on the unit.
Important: If using bottom discharge with roof curb, duct-work
should be attached to the curb prior to installing the unit. Duct-work
dimensions are shown in Roof Curb Installation Instructions Manual.
Refer to the Roof Curb Installation
Instructions for proper curb installation.
Curbing must be installed in compliance
with the National Roofing Contractors
Association Manual.
Compressor
23½”
Return
Lower unit carefully onto roof mounting
curb. While rigging the unit, the center of
Evaporator Coil
gravity will cause the condenser end to be
lower than the supply air end.
Condenser
Supply
Bring condenser end of unit into alignment
Coil
with the curb. With condenser end of the
unit resting on curb member and using
curb as a fulcrum, lower opposite end of
the unit until entire unit is seated on the
curb. When a rectangular cantilever curb is
37”
used, take care to center the unit. Check for
proper alignment and orientation of supply
Corner & Center-of-Gravity Locations
and return openings with duct.
Unit Weights
To assist in determining rigging
requirements, unit weights are shown
to the right.
Note: These weights are calculated
without accessories installed.
SS-CPH36-60
3-Ton
Weights (lbs)
4-Ton
Weights (lbs)
5-Ton
Weights (lbs)
Weight A
165
170
172
Weight B
160
164
163
Weight C
125
128
130
Weight D
120
123
123
Shipping Weight
590
605
610
Operating Weight
570
585
590
www.goodmanmfg.com
23
PRODUCT SPECIFICATIONS
ROOF CURB INSTALLATION (CONT.)
Curb installations must comply with local codes and should follow the
established guidelines of the National Roofing Contractors Association.
Proper unit installation requires that the roof curb be firmly and permanently
attached to the roof structure. Check for adequate fastening method prior
to setting the unit on the curb.
Full perimeter roof curbs are available from the factory and are shipped
unassembled. The installing contractor is responsible for field assembly,
squaring, leveling, and mounting on the roof structure. All required
hardware necessary for the assembly of the sheet metal curb is included in
the curb accessory package.
• Determine sufficient structural support before locating and mounting
the curb and package unit.
• Duct-work must be constructed using industry guidelines. The duct-work
must be placed into the roof curb before mounting the package unit. Our
full perimeter curbs include duct connection frames to be assembled with
the curb. Cantilevered-type curbs are not available from the factory.
• Contractor furnishes curb insulation, cant strips,
flashing, and general roofing material.
• Support curbs on parallel sides with roof members. To prevent damage to the unit, the roof
40¼
members cannot penetrate supply and return
duct openings.
Note: The unit and curb accessories are designed
to allow vertical duct installation before unit
14
placement. Duct installation after unit placement is
not recommended.
1/
¾
See the manual shipped with the roof curb for
14
assembly and installation instructions.
3-D VIEW
74
19½ x 13⅜
Supply Opening
28⅞ x 12½
Return Opening
5
6
1⅜
TOP VIEW
74
40¼
37 ID
POWER AND LOW-VOLTAGE BLOCK LOCATIONS
Single-Point Power
Terminal Block
70¾
ID
Low-Voltage
Terminal Block (TB1)
24
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
HAIL GUARD DIMENSIONS
SS-CPH36-60
www.goodmanmfg.com
25
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH036/48**1D** (SINGLE-PHASE DIRECT DRIVE)
PU
BK
BK
RD
RD
RD
GR
1
2
3
C
208
240
TR
G
EBTDR
NO
K1
R
XFMR-R
COM
XFMR-C
K1
C
NC
NOTE #2
SPEED
M1
M2
UP
BL
BL
RD
S2
3
1
S1
TB1
BK
YL/PK
GND
O
OR
O
BK
GR
YL
PU
RD
R
RD
H
C
WH
F
3
6
9
2
5
8
1
4
7
PU
GR
WH
DFT
DF1
RCCF
RD
RD
RD
RD
YL
LVJB
BR
RD
R
3 6
2 5
1 4
BL
WH
W2
HVDR
YL
OR
PLF 2
YL
Y
DF2
BK
SEE
NOTE #2
L1
T1
YL
BK
4
LVDR
BK
BK
SMOKE/FIRE
DETECTOR
REPLACES
JUMPER
BR
BK
C
C
RD
PU
2
2
0
8
2
4
0
/
1
/
6
0
RD
L2
BK
RD
BK
DC
PB
T2
PK
BL
BL
RD
BL
RD
RD
BL
BL
BK
BL
BL
24V
RD
YL
PLF 1
PU
BR
WH
BR
OR
OR
BL
BL
BL
TB1
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
PU
YL
RD
GR
SA (IF USED)
SEE NOTE 4
BK
RD
RD
PU
FC
3 SPEED
BK
BK
BR
EM
RD
BL
RD
PU
BR
BK
RD
EM
PU
BR
3 SPEED
BK
RD
BK
FC
PU
BL/PK
CONTROL
BOX
T3 T2 T1
ALTERNATE
MOTOR
6-WIRES
SEE NOTE 7
BL
DFT
YL/PK
YL
CM
HPS
COMP
LPS
RVC
L1
L2
SUPPLY VOLTAGE
208-240/1/60
C
T2
C
R
T1
C
COMP
S
C
H
DF1
DF2
HVDR
RCCF
F
S.A.
CM
IF USED
SA
TB1
TR
EM
EBTDR
BR
208-240V
BLOWER INTERLOCK RELAY
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ELECTRONIC BLOWER TIME DELAY
ECONOMIZER
EVAPORATOR MOTOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VALVE COIL
RUN CAPACITOR FOR
COMPRESSOR AND FAN
START ASSIST
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
NOTES:
SEE NOTE #3
3
1
TB1
TR
24V
DFT
R
DFT
W2
R
DC
Y
LVDR
C
RVC
O
BR
7
4
8
5
9
6
C
EBTDR
R
W2
O
W1
Y
Y2
LINE VOLTAGE
LOW VOLTAGE
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
W
WH
W
G
GR
G
R
RD
R
YL
Y2
Y1
Y/Y2
C
BL
O
OR
C
O
STAT
TB1
WITH ECONOMIZER OPTION
W
G
WH
GR
R
RD
Y1
W
G
R
YL
Y
Y/Y2
C
BL
O
OR
C
O
STAT
TB1
2 STAGE COOLING
6 5 4
3 2 1
R
G
XFMR
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST
105°C) USE COPPER CONDUCTOR ONLY.
2. TO CHANGE EVAPORATOR MOTOR SPEED MOVE
M1 OR M2 WIRE TO COM WHERE RD WIRE IS AND
PLACE RD WIRE ON EMPTY M1 OR M2 TERMINAL.
3. FOR 208 VOLT TRANSFORMER OPERATION MOVE
PURPLE AND RED WIRES FROM TERMINAL 3 TO
TERMINAL 2 ON TRANSFORMER.
4. START ASSIST FACTOR EQUIPED WHEN REQUIRED
5. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
6. ECONOMIZER PLUG LOCATED IN THE RETURN
AIR COMPARTMENT. REMOVE MALE PLUG AND
ATTACH FEMALE PLUG TO ECONOMIZER
ACCESSORY.
7. PURPLE WIRE CONNECTS TO TRANSFORMER (PIN 3)
HPS
PLF
R
C
LPS
FACTORY WIRING
COMPONENT LEGEND
BR
C
CM
COMP
DC
DFT
EBTR
ECON
EM
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
Y1
THERMOSTAT
G
W
PLF2
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #6
208-240/1/60
0140L00132 REV. B
WH
GR
W
G
R
RD
Y1
YL
R
Y1
Y/Y2
PK
Y2
C
BL
O
OR
G
C
4
STAT
TB1
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
26
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH036/48**3D** (THREE-PHASE DIRECT DRIVE)
PU
BK
BK
RD
RD
RD
G
BL
GR
2
3
C
208
240
BK
BL
TR
EBTDR
R
XFMR-R
XFMR-C
C
BL
COM
K1
PK
BL
NC
NOTE #2
M1
M2
RD
RD
BL
S2
BK
BK
3
1
BL
TB1
YL
T3
RD
RD
T2
RD
L2
BK
SEE
NOTE #2
L1
T1
YL
BK
YL/PK
GND
YL
OR
BK
BR
C
GR
3 6
2 5
1 4
YL
Y
O
OR
O
BK
PLF 2
YL
PU
LVDR
RD
LVJB
RD
R
WH
BK
R
HVDR
RD
C
RCCF
3
F
6
GR
PU
9
DFT
DF1
DF2
YL
BR
WH
W2
2
0
8
2
4
0
/
3
/
6
0
C
BK
BK
SMOKE/FIRE
DETECTOR
REPLACES
JUMPER
PB
OR
L3
PU
2
4
DC
RD
S1
RD
BL
BL
24V
RD
NO
K1
SPEED
UP
BL
1
RD
RD
RD
2
5
8
1
4
7
PLF 1
WH
BR
OR
BL
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
PU
YL
RD
GR
WH
BR
OR
BL
BL
TB1
PU
BK
RD
RD
BK
RD
BL
PU
PU
BR
EM
BK
FC
3 SPEED
PU BR BK
YL/PK
BL/PK
T3 T2 T1
EM
BR
CONTROL
BOX
RD
YL
RD
DFT
3 SPEED
ALTERNATE
MOTOR
6-WIRES
SEE NOTE 6
BL
BK
RD
BK
FC
PU
CM
HPS
COMP
LPS
RVC
L1
LINE VOLTAGE
LOW VOLTAGE
C
T2
C
T1
COMP
BR
C
CM
COMP
DC
DFT
ECON
EM
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
T3
T3
C
DF2
DF1
RCCF
HVDR
F
CM
EM
EBTDR
BR
208-240V
SEE NOTE #3
3
TB1
TR
1
TB1
TR
24V
DFT
LVDR
DC
Y
DFT
W2
C
RVC
O
BR
7
4
8
5
9
6
BLOWER INTERLOCK RELAY
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
EVAPORATOR MOTOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VALVE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
NOTES:
R
C
LPS
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST
105°C) USE COPPER CONDUCTOR ONLY.
2. TO CHANGE EVAPORATOR MOTOR SPEED MOVE
M1 OR M2 COM WHERE RD WIRE IS AND PLACE RD
WIRE ON EMPTY M1 OR M2 TERMINAL.
3. FOR 208 VOLT TRANSFORMER OPERATION MOVE
PURPLE AND RED WIRES FROM TERMINAL 3 TO
TERMINAL 2 ON TRANSFORMER.
4. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
5. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO ECONOMIZER ACCESSORY.
6. PURPLE WIRE CONNECTS TO TRANSFORMER (PIN 3)
6 5 4
3 2 1
R
C
G
XFMR
W1
Y/
Y2
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
W
W
G
WH
GR
R
RD
R
YL
Y2
Y/Y2
C
BL
O
OR
G
C
O
STAT
TB1
WITH ECONOMIZER OPTION
W
WH
G
GR
R
RD
Y1
YL
W
G
R
Y
Y/Y2
C
BL
O
OR
TB1
W
PLF2
R
O
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
C
O
STAT
2 STAGE COOLING
HPS
EBTDR
W2
FIELD WIRING
Y1
PLF
R
OPTIONAL
HIGH VOLTAGE
COMPONENT LEGEND
T2
T1
R
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
208-240/3/60
Y1
THERMOSTAT
O
G
C
SEE NOTE #5
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
208-240/3/60
0140L00129 REV. B
WH
GR
W
G
R
RD
Y1
YL
R
Y1
Y/Y2
PK
Y2
C
BL
O
OR
TB1
G
C
4
STAT
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
SS-CPH36-60
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
27
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH36/48/60**3B*** (THREE PHASE, BELT DRIVE)
OR
BK
BK
BK
OR
RD
RD
RD
RD
GR
S1 PK
S2
1
3
208
240
C
G
EBTDR
R
XFMR-R
XFMR-C
C
BL
85**)
:5
BL
RD
NO
K1
GR
COM
K1
OR
BL
YL
T3
RD
RD
T2
RD
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
BK
BK
RD
L2
C
BL
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
BL
BL
2
0
8
2
4
0
/
3
/
6
0
PB
OR
L3
TR
24V
TB1
PU
NC
M2
M1
BL
GND
YL
DC
OR
C
GR
YL
Y
OR
O
BK
LVDR
GR
BL
PLF 2
O
BR
L2
T1
T2
RD
R
HVDR
C
RCCF
F
3
6
9
2
5
8
PU
YL
RD
GR
WH
BR
OR
BL
1
4
7
RD
GR
WH
OR
BL
BL
DFT
DF1
DF2
RD
BR
RD
BC
RD
PU
RD
WH
PU
RD
BK
T3
YL
LVJB
WH
R
L3
C
BK
YL
BL
RD
W2
L1
PU
3 6
2 5
1 4
PLF 1
OR
BL
TB1
RD
RD
RD
PU
BK
BR
BK
BK
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
CONTROL
BOX
YL/PK
YL
BL/PK
T3 T1 T2
EM
DFT
BK
CM
COMP
LPS
HPS
RVC
L1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
208-240/3/60
T2
C
BC
C
CM
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
T2
T1
T1
COMP
C
T3
T3
C
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
TB1
TR
BC
208-240V
1
TR
24V
NOTES:
R
R HVDR
EBTDR
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
<
,
7
WH
GR
RD
>
(
4
YL
BL
OR
STAT
TB1
C
G
R
R
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
3
TB1
EBTDR
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
WITH ECONOMIZER OPTION
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
LPS
O
R
W2
O
W1
THERMOSTAT
Y/
Y2
2 STAGE COOLING
C
HPS
6 5 4
PLF2 3 2 1
Y1
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
(
4
STAT
TB1
P 4
L
F 5
1
6
<
,
7
>
208-240/3/60
0140L00064 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
<
,
7
>
>
(
4
STAT
TB1
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
28
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH36/48/60**4B (460V BELT DRIVE)
OR
BK
RD
RD
3
1
S2
S1
480
PK
EBTDR
R
XFMR-R
XFMR-C
C
BL
85**)
:5
BL
K1
NO
K1
COM
RD
M1
YL
T3
L3
RD
RD
T2
L2
OR
BK
BK
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
BL
GND
YL
DC
BL
OR
GR
PLF 2
YL
C
YL
Y
O
OR
O
BK
LVDR
GR
R
HVDR
RD
C
RCCF
F
DF1
RD
BL
RD
6
9
5
8
PU
YL
RD
GR
WH
BR
OR
BL
1
4
7
RD
GR
WH
OR
BL
BR
BC
1
RD
RD
3
2
DFT
T3
DF2
BK
WH
PU
BK
C
T2
T1
YL
BL
LVJB
RD
R
L3
3 6
2 5
1 4
WH
W2
L2
PU
BR
RD
BL
L1
4
6
0
/
3
/
6
0
RD
C
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
PU
NC
M2
PB
BL
C
24V
TB1
GR
BK
RD
BL
TR
G
BL
BL
RD
GR
OR
BK
OR
RD
PU
3
CMR
2
OR
PLF 1
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
TB1
RD
RD
RD
RD
PU
BK
BR
BK
BK
YL/PK
BL/PK
YL
CONTROL
BOX
T3 T1 T2
EM
DFT
BK
CM
HPS
COMP
LPS
RVC
L1
T2
C
T1
BC
C
CM
CMR
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
COMP
C
T3
T3
C
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
460V
BC
1
TB1
TR
3
TB1
24V
NOTES:
R
CMR
R HVDR
EBTDR
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
LPS
O
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
R
W2
O
W1
THERMOSTAT
Y/
Y2
6 5 4
PLF2 3 2 1
Y1
SEE NOTE 5
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
<
,
7
>
(
4
STAT
2 STAGE COOLING
C
HPS
>
(
4
WITH ECONOMIZER OPTION
TB1
P 4
L
F 5
1
6
<
,
7
STAT
TB1
C
G
R
R
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
CONDENSER MOTOR RELAY
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
TR
EBTDR
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
T2
T1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
460/3/60
460/3/60
0140L00017 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
TB1
<
,
7
>
>
(
4
STAT
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
SS-CPH36-60
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
29
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH36/48/60***7B*** (575V, BELT DRIVE)
OR
BK
BK
OR
OR
RD
RD
RD
BL
85**)
:5
BL
RD
K1
NO
K1
COM
RD
24V
TB1
GR
C
YL
T3
L3
PB
RD
RD
T2
L2
OR
5
7
5
/
3
/
6
0
TR
BL
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
BK
BK
PU
NC
M2
M1
575
S1 PK
S2
BK
RD
BL
3
1
GR
G EBTDR
R
XFMR-R
XFMR-C
C
BL
BL
RD
C
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
GND
C
YL
O
LVDR
GR
PU
BK
C
WH
DF1
DF2
RD
C
RCCF
F
RD
BL
RD
1
RD
RD
3
6
2
5
8
1
4
7
GR
9
PU
3
CMR
2
OR
WH
OR
BR
BC
BK
PU
YL
RD
GR
WH
BR
OR
BL
PLF 1
DFT
T3
T2
BR
RD
BK
RD
R
HVDR
T1
LVJB
WH
R
L3
YL
BL
RD
W2
L2
L1
3 6
2 5
1 4
OR
O
BL
BL
YL
GR
YL
Y
DC
PLF 2
OR
BL
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
TB1
RD
RD
PU
BK
EM
BR
BK
YL/PK
BK
YL
T3 T1 T2
DFT
BK
CONTROL
BOX
BL/PK
RD
RD
HPS
CM
COMP
LPS
RVC
L1
T2
C
T1
C
T3
T3
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
575V
BC
3
TB1
TR
1
TB1
TR
24V
EBTDR
NOTES:
R
CMR
EBTDR
R
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
LPS
O
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
6 5 4
PLF2 3 2 1
6
R
W2
O
W1
THERMOSTAT
Y/
Y2
Y1
SEE NOTE 5
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
<
,
7
>
(
4
STAT
2 STAGE COOLING
C
HPS
>
(
4
WITH ECONOMIZER OPTION
TB1
P 4
L
F 5
1
<
,
7
STAT
TB1
C
G
R
R HVDR
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
CONDENSER MOTOR RELAY
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
BC
C
CM
CMR
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
COMP
C
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
T2
T1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
575/3/60
575/3/60
0140L00067 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
<
,
7
>
>
(
4
STAT
TB1
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
30
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH060***1D*** (SINGLE-PHASE, DIRECT DRIVE)
BK
RD RD
REPLACE JUMPER W ITH
SMOKE/FIRE DETECTOR
TB1
RD
BL
PB
2
3
C
208
TR
240
RD
RD
T2
RD
L2
BK
C
BL
BK
BK
BL
BK
SEE
NOTE #2
L1
T1
YL
YL
YL/PK
RD
LVDR
GR
YL
PU
YL
O
OR
O
BK
BR
W2
WH
R
PLF 1
RD
H
C
F
3
6
9
2
5
8
1
4
7
GR
WH
DFT
GR WH
DF1
DF2
RCCF
RD
RD
1
RD
RD
5
OR BR
YL
YL TB1
WH
BR
WH
BR
OR
OR
BL
BL
BL
TB1
SA (IF USED)
SEE NOTE 4
WH PU
RD
RD
RD
1 2 3 4 5
EM
C L G N
PU
BK
BR
BK
BK
YL/PK
YL
BL/PK
CONTROL
BOX
T3 T1 T2
DFT
BK
BL
CM
HPS
,7
'0
COMP
7)
LPS
RVC
FACTORY WIRING
L2
L1
C
C
CM
COMP
DC
DFT
ECON
EM
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
T2
R
T1
C
COMP
S
C
H
DF1
DF2
HVDR
RCCF
F
S.A.
CM
IF USED
N
SA
TB1
TR
L
EM
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
EVAPORATOR MOTOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VALVE COIL
RUN CAPACITOR FOR
COMPRESSOR AND FAN
START ASSIST
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
G
208-240V
NOTES:
SEE NOTE #3
3
1
TB1
TR
24V
DFT
W2
R
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
SUPPLY VOLTAGE
208-240/1/60
R
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
PU
YL
RD
GR
BL
PU
YL
LVJB
BK
RD
R
HVDR
3 6
2 5
1 4
BL
WH
RD
YL
YL
OR
PLF 2
C
Y
6
0
GND
BL
DC
2
0
8
2
4
0
/
1
/
BL
24V
PK
RD
BL
1
S1
S2
BK
DC
Y
DFT
C
RVC
O
LVDR
1
2
3
4
5
P 4
L
F 5
1
6
SEE NOTE #2
EM C
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST
105°C) USE COPPER CONDUCTOR ONLY.
2. TO CHANGE EVAPORATOR MOTOR SPEED MOVE
WHITE AND YELLOW LEADS FROM "3" AND "4" TO
"4" AND "5". IF BOTH LEADS ARE ENERGIZED, THE
HIGHER SPEED SETTING IS USED.
3. FOR 208 VOLT TRANSFORMER OPERATION MOVE
BLACK WIRES FROM TERMINAL 3 TO TERMINAL 2
ON TRANSFORMER.
4. START ASSIST FACTOR EQUIPED WHEN REQUIRED
5. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
6. ECONOMIZER PLUG LOCATED IN THE RETURN
AIR COMPARTMENT. REMOVE MALE PLUG AND
ATTACH FEMALE PLUG TO ECONOMIZER
ACCESSORY.
C
LPS
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
<
,
7
>
(
4
STAT
TB1
WITH ECONOMIZER OPTION
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
<
,
7
>
(
4
STAT
TB1
2 STAGE COOLING
HPS
6 5 4
3 2 1
PLF2
R
W2
O
W1
Y
Y2
Y1
THERMOSTAT
G
C
SEE NOTE #6
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
208-240/1/60
0140L00016 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
TB1
<
,
7
>
>
(
4
STAT
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
SS-CPH36-60
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
31
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH060***3D*** (3-PHASE, DIRECT DRIVE)
RD
BK
RD
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
RD
BK
BK
BL
BL
TB1
S2
1
2
3
C
208
TR
240
S1
24V
PK
RD
PB
YL
T3
RD
RD
T2
BK
BK
OR
L3
RD
L2
C
BL
BL
BK
SEE
NOTE #2
L1
T1
YL
BL
YL
GND
YL/PK
YL
OR
RD
DC
C
GR
LVDR
O
OR
O
BK
PLF 2
YL
PU
BR
RD
WH
RD
R
PLF 1
BK
WH
R
HVDR
RD
C
RCCF
F
3
6
9
2
5
8
1
4
7
GR
WH
DFT
YL
DF1
DF2
TB1
RD
RD
1
RD
5
OR BR
WH
BR
OR
BL
TB1
PU
RD
RD
CONTROL
BOX
BK
RD
1 2 3 4 5
EM
C L G N
PU BR BK
BK
YL/PK
YL
BL/PK
T3 T1 T2
DFT
BL
BK
CM
HPS
,7
'0
COMP
7)
LPS
RVC
L1
FACTORY WIRING
L3
L2
LINE VOLTAGE
LOW VOLTAGE
SUPPLY VOLTAGE
208-240/3/60
OPTIONAL
HIGH VOLTAGE
COMPONENT LEGEND
C
CM
COMP
DC
DFT
ECON
EM
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
T2
C
T2
T1
T1
COMP
C
T3
T3
C
DF2
DF1
RCCF
HVDR
F
CM
L
EM
N
TB1
TR
G
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
EVAPORATOR MOTOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VALVE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
208-240V
SEE NOTE #3
3
TR
24V
DFT
R
W2
LVDR
NOTES:
1
TB1
R
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
PU
YL
RD
GR
WH
BR
OR
BL
BL
BL
YL
WH PU
YL
LVJB
WH
W2
GR
3 6
2 5
1 4
YL
Y
2
0
8
2
4
0
/
3
/
6
0
BL
DC
Y
DFT
C
RVC
O
1
2
3
4
5
SEE NOTE #2
EM C
C
LPS
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST
105°C) USE COPPER CONDUCTOR ONLY.
2. TO CHANGE EVAPORATOR MOTOR SPEED MOVE
WHITE AND YELLOW LEADS FROM "3" AND "4" TO
"4" AND "5". IF BOTH LEADS ARE ENERGIZED, THE
HIGHER SPEED SETTING IS USED.
3. FOR 208 VOLT TRANSFORMER OPERATION MOVE
BLACK WIRES FROM TERMINAL 3 TO TERMINAL 2
ON TRANSFORMER.
4. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
5. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO ECONOMIZER ACCESSORY.
FIELD
WIRING
FIELD WIRING
HIGH
HIGH VOLTAGE
VOLTAGE
LOW VOLTAGE
VOLTAGE
LOW
WIRE CODE
WIRE CODE
BK BLACK
BL BLUEBK BLACK
BR BROWN
BL BLUE
GR GREEN
BR BROWN
OR ORANGE
GR GREEN
PK PINKOR ORANGE
PU PURPLE
PK PINK
RD RED PU PURPLE
WH WHITE
RD RED
YL YELLOW
WH WHITE
BL/PK BLUE
PINK STRIP
YL WITH
YELLOW
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
<
,
7
WH
GR
RD
>
(
4
YL
BL
OR
STAT
TB1
WITH ECONOMIZER OPTION
<
,
7
>
>>
(
4
<
,
7
>
WH
GR
RD
YL
(
4
BL
OR
STAT
TB1
2 STAGE COOLING
P 4
L
F 5
1
6
HPS
6 5 4
3 2 1
PLF2
R
W2
O
W1
Y/
Y2
Y1
THERMOSTAT
O
G
C
SEE NOTE #5
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
208-240/3/60 0140L00012 REV. C
<
,
7
>
>>
(
4
<
,
7
>
>
(
4
WH
GR
RD
YL
PK
BL
OR
STAT
TB1
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
32
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH60***3B*** (THREE PHASE, BELT DRIVE)
OR
BK
BK
BK
OR
RD
RD
RD
RD
GR
S1 PK
S2
1
3
208
240
C
G
EBTDR
R
XFMR-R
XFMR-C
C
BL
85**)
:5
BL
RD
NO
K1
GR
COM
K1
OR
BL
YL
T3
RD
RD
T2
RD
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
BK
BK
RD
L2
C
BL
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
BL
BL
2
0
8
2
4
0
/
3
/
6
0
PB
OR
L3
TR
24V
TB1
PU
NC
M2
M1
BL
GND
YL
DC
OR
C
GR
YL
Y
O
BR
BK
LVDR
GR
BL
PLF 2
LVJB
C
RCCF
F
DF1
RD
6
PU
YL
RD
GR
WH
BR
OR
BL
2
5
8
1
4
7
RD
GR
WH
OR
BL
BL
9
BR
RD
BC
RD
PU
RD
3
DFT
T3
DF2
BK
WH
PU
RD
BK
RD
R
C
T2
YL
BL
WH
R
L3
HVDR
T1
PU
RD
W2
L2
L1
YL
OR
O
3 6
2 5
1 4
PLF 1
OR
BL
TB1
RD
RD
RD
PU
BK
BR
BK
BK
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
CONTROL
BOX
YL/PK
YL
BL/PK
T3 T1 T2
EM
DFT
BK
CM
COMP
LPS
HPS
RVC
L1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
208-240/3/60
T2
C
BC
C
CM
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
T2
T1
T1
COMP
C
T3
T3
C
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
TB1
TR
BC
208-240V
1
TR
24V
NOTES:
R
R HVDR
EBTDR
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
LPS
O
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
R
W2
O
W1
THERMOSTAT
Y/
Y2
6 5 4
PLF2 3 2 1
Y1
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
<
,
7
>
(
4
STAT
2 STAGE COOLING
C
HPS
>
(
4
WITH ECONOMIZER OPTION
TB1
P 4
L
F 5
1
6
<
,
7
STAT
TB1
C
G
R
R
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
3
TB1
EBTDR
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
208-240/3/60
0140L00064 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
TB1
<
,
7
>
>
(
4
STAT
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
SS-CPH36-60
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
33
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH60***4B (460V BELT DRIVE)
OR
BK
RD
RD
BL
85**)
:5
BL
3
1
G EBTDR
R
XFMR-R
XFMR-C
C
BL
S2
K1
NO
K1
COM
S1
RD
480
PK
YL
T3
L3
RD
RD
T2
L2
OR
C
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
BK
BK
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
GND
YL
DC
OR
GR
PLF 2
YL
C
YL
Y
O
OR
O
BK
LVDR
GR
T1
T2
RD
R
HVDR
C
RCCF
F
3
6
9
2
5
8
PU
YL
RD
GR
WH
BR
OR
BL
1
4
7
RD
GR
WH
OR
BL
DFT
T3
DF1
DF2
RD
BL
RD
BR
BC
1
RD
RD
WH
PU
BK
C
BK
YL
BL
LVJB
RD
R
L3
3 6
2 5
1 4
WH
W2
L2
PU
BR
RD
BL
L1
4
6
0
/
3
/
6
0
RD
BL
BL
PB
BL
C
24V
TB1
GR
BK
RD
BL
TR
PU
NC
M2
M1
BL
RD
GR
OR
BK
OR
RD
PU
3
CMR
2
OR
PLF 1
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
TB1
RD
RD
RD
RD
PU
BK
BR
BK
BK
YL/PK
BL/PK
YL
CONTROL
BOX
T3 T1 T2
EM
DFT
BK
CM
HPS
COMP
LPS
RVC
L1
T2
C
T1
BC
C
CM
CMR
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
COMP
C
T3
T3
C
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
460V
BC
1
TB1
TR
3
TB1
24V
NOTES:
R
CMR
EBTDR
R
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
<
,
7
WH
GR
RD
>
(
4
YL
BL
OR
STAT
TB1
C
G
R
R HVDR
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
CONDENSER MOTOR RELAY
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
TR
EBTDR
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
T2
T1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
460/3/60
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
WITH ECONOMIZER OPTION
<
,
7
>
>>
(
4
<
,
7
>
WH
GR
RD
YL
(
4
BL
OR
STAT
TB1
LPS
O
P 4
L
F 5
1
6
R
W2
O
W1
THERMOSTAT
Y/
Y2
2 STAGE COOLING
C
HPS
6 5 4
PLF2 3 2 1
Y1
SEE NOTE 5
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
460/3/60
0140L00017 REV. C
<
,
7
>
>>
(
4
<
,
7
>
>
(
4
WH
GR
RD
YL
PK
BL
OR
STAT
TB1
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
34
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
SS-CPH36-60
PRODUCT SPECIFICATIONS
WIRING DIAGRAM — CPH60***7B*** (575V, BELT DRIVE)
OR
BK
BK
OR
OR
RD
RD
RD
BL
85**)
:5
BL
RD
GR
S1 PK
S2
G EBTDR
R
XFMR-R
XFMR-C
C
BL
K1
NO
K1
COM
RD
1
3
575
C
BK
RD
BL
YL
T3
L3
RD
RD
T2
L2
PB
OR
5
7
5
/
3
/
6
0
TR
24V
TB1
GR
BL
BL
REPLACE JUMPER WITH
SMOKE/FIRE DETECTOR
BK
BK
PU
NC
M2
M1
BL
RD
C
BK
SEE
NOTE #2
L1
T1
YL
YL/PK
GND
C
LVDR
GR
O
OR
O
BK
PU
BR
RD
WH
RD
RD
R
HVDR
C
RCCF
F
DF1
RD
BL
RD
6
5
9
8
1
4
7
1
RD
PU
3
CMR
2
OR
WH
OR
BR
BC
RD
3
2
GR
DFT
T3
DF2
BK
PU
YL
RD
GR
WH
BR
OR
BL
PLF 1
BK
C
T2
T1
LVJB
WH
R
L3
YL
BL
RD
W2
L2
L1
3 6
2 5
1 4
YL
BL
BL
YL
GR
YL
Y
DC
PLF 2
OR
BL
BL
T
H
E
R
M
O
S
T
A
T
Y1
Y/Y2
R
G
W1
W2
O
C
TB1
RD
RD
PU
BK
EM
BL/PK
RD
RD
BR
BK
YL
T3 T1 T2
DFT
BK
CONTROL
BOX
YL/PK
BK
HPS
CM
COMP
LPS
RVC
L1
T2
C
T1
C
T3
T3
DF1
RCCF
DF2
HVDR
F
CM
BC
1
EM
3
BC
575V
BC
3
TB1
TR
1
TB1
TR
24V
EBTDR
NOTES:
R
CMR
EBTDR
R
BC
EBTDR
DFT
R
W2
LVDR
DC
Y
DFT
C
RVC
OPTIONAL
HIGH VOLTAGE
FIELD WIRING
HIGH VOLTAGE
LOW VOLTAGE
WIRE CODE
BK BLACK
BL BLUE
BR BROWN
GR GREEN
OR ORANGE
PK PINK
PU PURPLE
RD RED
WH WHITE
YL YELLOW
BL/PK BLUE WITH PINK STRIP
YL/PK YELLOW WITH PINK STRIP
THERMOSTAT
FIELD WIRING
NO ECONOMIZER
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
1. REPLACEMENT WIRE MUST BE SAME SIZE AND
TYPE INSULATION AS ORIGINAL (AT LEAST 105°C)
USE COPPER CONDUCTOR ONLY.
2. USE COPPER CONDUCTORS ONLY
++ USE N.E.C. CLASS 2 WIRE
3. ECONOMIZER PLUG LOCATED IN THE RETURN AIR
COMPARTMENT. REMOVE MALE PLUG AND ATTACH
FEMALE PLUG TO THE ECONOMIZER ACCESSORY.
O
LPS
O
<
,
7
>
>>
(
4
WH
GR
RD
YL
BL
OR
6 5 4
PLF2 3 2 1
6
R
W2
O
W1
THERMOSTAT
Y/
Y2
Y1
SEE NOTE 5
G
SEE UNIT RATING PLATE FOR TYPE AND SIZE
OF OVER CURRENT PROTECTION
C
SEE NOTE #3
<
,
7
>
(
4
STAT
2 STAGE COOLING
C
HPS
>
(
4
WITH ECONOMIZER OPTION
TB1
P 4
L
F 5
1
<
,
7
STAT
TB1
C
G
R
R HVDR
BLOWER CONTACTOR
CONTACTOR
CONDENSER MOTOR
CONDENSER MOTOR RELAY
COMPRESSOR
DEFROST CONTROL
DEFROST THERMOSTAT
ECONOMIZER
ELECTRONIC BLOWER TIME DELAY
EVAPORATOR MOTOR RELAY
RELAY
EVAPORATOR MOTOR
FAN CAPACITOR
EQUPIMENT GROUND
HIGH PRESSURE SWITCH
HIGH VOLTAGE DEFROST RELAY
LOW PRESSURE SWITCH
LOW VOLTAGE DEFROST RELAY
LOW VOLTAGE JUNCTION BOX
POWER DISTRIBUTION BLOCK
FEMALE PLUG / CONNECTOR
REVERSING VAVLE COIL
RUN CAPACITOR FOR
CONDENSER FAN
TERMINAL BLOCK (24V SIGNAL)
TRANSFORMER
BC
C
CM
CMR
COMP
DC
DFT
ECON
EBTD
EMR
R
EM
FC
GND
HPS
HVDR
LPS
LVDR
LVJB
PB
PLF
RVC
RCCF
C
COMP
C
LINE VOLTAGE
LOW VOLTAGE
COMPONENT LEGEND
T2
T1
FACTORY WIRING
L3
L2
SUPPLY VOLTAGE
575/3/60
575/3/60
0140L00067 REV. C
<
,
7
>
>>
(
4
WH
GR
RD
YL
PK
BL
OR
TB1
<
,
7
>
>
(
4
STAT
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
WARNING
SS-CPH36-60
High Voltage:
Disconnect all power before servicing or installing this unit. Multiple power sources may
be present. Failure to do so may cause property damage, personal injury, or death.
www.goodmanmfg.com
35
PRODUCT SPECIFICATIONS
ACCESSORIES
Item #
Description
Fits Model Sizes
Dimensions (“)
Ship
Weight
16 x 6 x 76
119
14CURB3672
Roof Curb – 14” Tall
3-6 tons
25FD3672
25% Manual Fresh Air Damper
3-6 tons
11
25MFD3672
25% Motorized Fresh Air Damper
3-6 tons
12
CDK36
Concentric Duct Kit
3 tons
25 x 48 x 16
35
CDK4872
Concentric Duct Kit
4-6 tons
25 x 48 x 16
35
DNECONGS3672
Downflow Economizer for CPC/CPG
3-6 tons
32½ x 20½ x 38
75
DNECONHP3672
Downflow Economizer for CPH
3-6 tons
32½ x 20½ x 38
75
DNSQRRND36
Downflow Square-to-Round Adapter – 16” Round
3 tons
DNSQRRND4872
Downflow Square-to-Round Adapter – 18” Round
4-6 tons
HailGD01
Condenser Coil Hail Guard
3-6 tons
HAKT36300
High-Altitude Kit
3-5 tons
HZECONGS3672
Horizontal Economizer for CPC/CPG
3-6 tons
75
HZECONHP3672
Horizontal Economizer for CPH
3-6 tons
75
LPKT36150
LP Conversion Kit
40 x 36 x 2
All Models
Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice
or without incurring obligations. © 2008 • Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.
36
www.goodmanmfg.com
SS-CPH36-60