Hartke Brochure-v6.9

TOM HAMILTON Aerosmith
WILL LEE David Letterman Band
GREG SMITH Dio, Rainbow
RICHARD PATTERSON
Miles Davis, David Sanborn
DAVE SANTOS Billy Joel, CSN
GARRY TALLENT Bruce Springsteen
TUCKER The Pennyroyals
WAYNE PEDZWATER
Session Bassist, NYC
JACK BRUCE
Jack Bruce Band, Cream
FRANCISCO SANTANA
Aretha Franklin
© 2003 Samson. Printed in Hong Kong
CHAZ FRICHTEL
Chuck Mangione, Michael Mc Donald
P BASS JONES
En Vogue, MD Aaron Carter
CAT FLH 6.9
DOUBLE Z Kid Creole
Summer/Fall 2003
2
Hartke History
Hartke History
The Hartke Story:
It was the heyday of
Hi-Fi when company
founders Larry Hartke and
Ron Lorman started experimenting with speaker
designs; both apprenticing
with renowned Hi-Fi
designer A. Stewart
Hegeman.
The two originally
intended to design home
audio speakers. They experimented with different types
of cone materials ultimately
choosing aluminum for its
speed, strength and
transient abilities.
Larry and Ron spent
several years building and
working in recording studios
around New York and New
Jersey–all the while
continuing to experiment
with aluminum speaker
designs. In the late 70s,
Hartke worked repairing
Ampex tape machines. It
was there, in a wellequipped metal shop, the
original dies for Hartke
aluminum speaker cones
were machined.
At the same time Lorman
became stage manager/
sound engineer at the
famous Bottom Line club in
New York’s Greenwich
Village. It was here that
Lorman met hundreds of
artists including bass legend
Jaco Pastorius. After hearing
their prototype aluminum
cone monitors, Jaco
suggested they build him a
bass cabinet. They did
(opposite page).
Soon, Larry and Ron were
testing their aluminum cone
cabinets on stage with some
of the hottest musicians of
the day. Later, Lorman
would travel the world as an
engineer for artists like
Frank Zappa, Paul Simon,
Jack Bruce and Miles Davis.
Ron tested the Hartke
prototypes on stages around
the world. Jaco, Marcus
Miller, Jack Bruce and Garry
Tallent would be some of the
first artists to play Hartke
cabinets on stage.
Aluminum speakers
produced a sound that had
never been heard before: a
clear, punchy, accurate
sound with far broader
dynamics for greater
expression.
Led by pioneers like Jaco,
bass players were coming
out front. And Hartke
cabinets provided the
necessary clarity and
definition. Word began to
spread, and soon everyone
wanted to try a Hartke
cabinet. Larry and Ron hand
built twenty 4x10 cabinets
and essentially gave them
away. Early recipients
included legends like Darryl
Jones and Will Lee.
Hartke hit it big in the mid
80s in New York City with a
show many consider to be
the first show to feature
bass players. The showcase
featured Jaco Pastorius,
Darryl Jones, Jerry Peak of
the Steve Morse Band, and
Bill “Buddha” Dickens, who
was then playing with
Ramsey Lewis. In 1985 the
first Hartke production
models were built. The first
cabinet was a 4x10 module,
the 410XL. Soon after came
a 1x15 and a 2x10 module.
All are still in production.
Since then, Hartke has
introduced a complete line
of bass gear, from cabinets
to combos, amps to bass
guitars.
Today Hartke makes bass
systems perfect for
everyone, from beginners to
experts. Ron and Larry run
the same kind of hands on,
personal operation they did
from the start. They
continue to refine their
revolutionary aluminum
speakers, and remain
committed to providing the
ultimate in professional
performance.
3
More than 20 years ago, Hartke redefined the sound of the electric
bass with aluminum. Strong, rigid and light, aluminum cone
speakers are faster, crisper and more defined. Innovative cabinet
designs with careful use of ports and high frequency drivers are
also part of the full range picture. But it’s the aluminum that adds
the magic. Hartke drivers add unmistakable crispness to the
midrange, bringing hidden high frequencies and harmonics to life.
That’s the Hartke punch.
Today’s production version:
the 810XL
The Legend: JACO PASTORIUS
John Francis Anthony
Pastorius III was born in
Florida in 1951. The son of a
jazz drummer, Jaco picked
up music early. A drummer
first, he picked up the bass
at age 15. He would go on
to revolutionize the way the
instrument was played.
A master of jazz, funk, R&B
and reggae, he created a
new style of playing using
muting techniques, and
false harmonics.
He developed the ability
to play bass and rhythm guitar parts simultaneously,
introducing harmony and
midrange to bass guitar.
Jaco was essentially the
inventor of the fretless
electric bass, and legend
tells of him ripping frets out
of his guitar one night and
filling the grooves with
wood putty.
His fame grew quickly
among musicians, and in
1976, his eponymously titled
first album featured the likes
of Herbie Hancock, Hubert
Laws, David Sanborn, Michael
Brecker and Lenny White.
Jaco became world
famous for his originality
when he joined Joe
Zawinul’s legendary fusion
band Weather Report.
Tragically, Jaco passed
away in 1987 at the age of
35. He is remembered as
one of the most important
bass players of the
20th century.
Larry Hartke is pictured with the cabinet changed
the sound of the electric bass. This is the original
8 x 10 hand-made for Jaco Pastorius.
By combining eight 10” aluminum drivers in a
single stack, the cabinet introduced a midrange
punch never heard before. It immediately grabbed the attention of the world’s finest bass players.
4
XL Series
XL Series
5
▲
The XL Series are simply legendary. No cabinet produces the smooth, rich, punchy
attack of Hartke more faithfully that the XL Series.That is why they have been the
choice of some of the world’s finest bass players since their introduction.
▲
410XL
4.5XL
The ultimate Hartke. Four Hartke 10” drivers and a custom 5”
high-frequency speaker in a tuned, ported cabinet. Handles up to
400 watts at 8 ohms. Wide frequency response of 30 Hz to 12 kHz
for more coverage.
Classic Hartke.
The 410XL features
a twin chamber,
dual-ported design
and four 10” XL
drivers. 400 watt
power handling at
8 ohms and a frequency response
of 30 Hz to 5 kHz.
▲ 210XL
Perfect for smaller venues. A single chamber, sealed
cabinet with two 10” aluminum-cone bass drivers.
Power handling is 200 watts at 8 ohms with a
frequency response of 50 Hz to 5 kHz.
▼ 2.5XL
A great full-range cabinet on its own or a perfect
add-on for your 410XL. A unique ported cabinet
design with two custom 10” drivers and a 5” high
frequency driver. Handles up to 200 watts at 8 ohms
with a frequency response of 35 Hz to 12 kHz.
810XL ▲
The 810XL features eight 10” aluminum drivers in a
highly dampened and sealed 3/4” and 5/8” composite plywood cabinet. The sound is rich, crisp and
huge. Handling 800 watts at 4 ohms, the 810XL
produces a frequency response of 40Hz - 5kHz. It
has recessed 1/4” connections and handles, corner
protection and rear casters for easy tilt-rolling
115XL ▲
This tuned, duct-vented XL cabinet and15” low-bass driver add
more bottom to your sound. Power handling is 200 watts at 8
ohms with an expanded frequency response of 30 Hz to 2.5 kHz.
▲ 215XL
Deep low end with a dual-ported cabinet design and two
premium Hartke 15XL aluminum-cone drivers. Handles up to
400 watts at 4 ohms. Frequency response is 30 Hz to 1 kHz.
EARLY 70s
LATE 70s
Company founders Larry Hartke and Ron Lorman, friends since Jr. High school, begin experimenting
with aluminum speakers designed for Hi-Fi home audio use.
Ron Lorman working as stage manager for Bottom Line club in New York City.
The aluminum speakers are adapted for use with electric bass and tested at the club.
Professional Series cabinets have the power handling
and build quality one would expect at the top of the
line. Professional Series cabinets take the signature
▲
Hartke tone to the next level.
Professional Series 4200
Perhaps the only cabinet the working professional bassist would
ever need, the 4200 matches four heavy-duty 10-inch aluminum
cone drivers with a two-inch titanium driver in an extra-large wide
dispersion horn. The combination provides incredible lows and
mids, with the ability to reproduce crystal clear highs when needed.
The 4200 has crossover and horn level controls, a beautifully built
birch plywood cabinet with symmetrical dampened ports on each
side. Rated power handling is 400 watts at 4 ohms. Frequency
response is 30hz - 15khz. It has recessed 1/4” and Speakon inputs,
and corner protection with locking capability for stacking.
▲
6
Professional Series
Professional Series
Professional Series 2200 ▼
The new 2200 was designed from the ground up to be the
new signature bass cabinet of the Hartke line. It has an allnew 2 x 12 plus horn array built into an amazing 3/4” composite plywood and baltic birch cabinet. The angled top portion of the cabinet not only adds to the room projecting
capabilities of the speaker, it allows the bass player to better
self-monitor. One 12” aluminum driver and a perfectly
matched 1” compression driver in a medium-throw horn are
mounted in the angled portion, while another 12” driver and
dual curved ports fire straight out from the lower section.
The 4 ohm cabinet handles 300 watts, frequency response is
29 Hz–16kHz. A crossover with overload protection is builtin. the 2200 has recessed 1/4” and Speakon inputs, corner
protection, and heavy-duty removable casters.
“Since I got a 2200, I no
longer need to haul
around my full stack.
This is the ultimate
metro piece.”
— Jack Knight
Funk Filharmonik, NYC
Professional Series 2100 ▼
Even more portable, the compact 2100 is similar in
most respects to the 2200. It has dual 10” aluminum
drivers and the same 1” compression driver. At
4 ohms, the 200 Watt 2100 cabinet will produce
frequency response of 34 Hz–16 kHz.
Professional Series 1800
The perfect bottom. The matched 1800 low end cab with an 18”
driver provides an awesome extended low end to any full range
cabinet. The perfect compliment to the 4200, or the classic Hartke
XL Series full range cabinets. The 1800 takes in 600 watts at 4 ohms,
and pushes out 28–300Hz with serious SPL. The 18” driver has a 3”
long excursion coil, and a 120 oz. magnet. The rigid and dampened
plywood cabinet has substantial internal bracing and features four
front-firing air flow ports for extra punch. It has recessed 1/4” and
Speakon inputs, corner protection, heavy-duty casters and a top
handle for easy tilt-rolling.
1984
1985
The first 410 bass modules go on tour with Jaco
Pastorius, Jack Bruce, Will Lee, Garry Tallent, Darryl
Jones, and many other bassists.
1987
In conjunction with Guild Guitars, Hartke markets the first
production model, the 410 Bass Module.
Samson Technologies begins distrubuting Hartke. The first 15” speaker cabinet ,
the 115 Module, is released. Tom Hamilton from Aerosmith joins the Hartke family.
7
8
VX Series
Transporter
9
A great deal of research and development went
Hartke for working bass players. Built tough like our world-class
into the design of VX speakers.The cones are
XL Series, each features rugged, roadworthy cabinets with
made of an extremely rigid treated paper and
metal grills and our versatile TP aluminum-cone drivers
combined with tough fabric surrounds and
for great sound and coverage.
matched convex dust caps.The cones are then
mounted on heavy duty steel frames.The high
efficiency/low moving mass design allows for
▲
410TP
maximum output and plenty of headroom.
▲
The affordable route to classic Hartke tone.
Tuned and calibrated cabinet design coupled
with four Hartke 10” aluminum-cone bass drivers.
Ample power handling (300 watts at 8 ohms),
and a frequency response of 40 Hz to 4 kHz.
VX410
The VX410 handles 400 watts of power at 8 ohms, driving
four 10” speakers, and a high frequency compression driver.
▼ VX3500
An incredible sounding combo, The VX3500 combines the
classic Hartke 3500 head with a high frequency driver centered
in a 4 x 10 VX speaker array. This 350 Watt combo features
selectable tube or solid state preamp, adjustable compression,
bass and treble contour control and a 10 band graphic EQ.
▲
115TP
▲
A duct-vented cabinet design combined with
low range 15” aluminum-cone bass driver.
Power handling of 150 watts at 8 ohms.
Wide frequency response of 40 Hz to 2.5 kHz.
210TP
VX115 ▲
The lean mean bass machine. A single-chamber, sealed cabinet
design complemented by two Hartke 10” aluminum-cone bass
drivers. Power handling is 150 watts at 8 ohms, frequency
response 50 Hz to 4 kHz.
1988
The VX115, handling 300 watts at 8 ohms, features a 15” low
frequency driver and a high frequency compression driver.
1989
Hartke releases the new improved XL-Series in 410XL
and 115XL configurations.
1990
A 210XL module is add to the line.
The Transporter Series, a high performance, affordable
line of lightweight cabinets is introduced.
1991
Hartke introduces a line of hybrid tube/solid state
amplifiers including the classic 3500 model. Hartke
introduces its first bass combos.
E Street Band bassist Garry Tallent
has been playing Hartke for years.
Maybe the first ever bass player-only show.
Sponsored by Hartke and featuring Jaco
Pastorius, Darryl Jones, Jerry Peak of the Steve
Morse Band, and Bill “Buddha” Dickens.
Aerosmith bassist Tom Hamilton
is a long time Hartke player.
Darryl Jones on stage
with Miles Davis
One night at the Lone Star in New York City,
Jaco got a surprise visit from Jimmy Page
and his band at the time, The Firm.
12
AMPS
Amps
Introduced in 1991, the Hartke 3500 amplifier has become an industry standard in bass amplification. With switchable
▲
tube or solid state preamplifiers, there is no better way to power Hartke (or any other brand) of speaker cabinet.
1400
140 watts at 4 ohms/80 watts at 8 ohms. Preset
contour control. 4-band EQ. Switchable
compression. Headphone output. Effects loop.
3500 ▲
350 watts at 4 ohms/240 watts at 8 ohms. Selectable tube and solid state preamps. Bass and treble contour
control. 10-band graphic EQ. Adjustable compression. Effects loop. Balanced XLR output.
▲
2000
200 watts at
4 ohms/120 watts at
8 ohms. Selectable
tube and solid state
preamps. Bass and
treble contour control.
10-band graphic EQ.
Adjustable compression. Effects loop.
3000 ▲
▲
Unprecedented versatility in a rackmount bass amp. 300 watts at 4 ohms. 4-band EQ. Shape circuit with
variable intensity control. Deep bass enhancer. Balanced preamp out, direct out and line out. Pre and post-EQ
effects send and return. Audio mute. Independently buffered inputs.
5000
▲
250 watts per side at 4 ohms/170 watts per side at 8
ohms. Biamp or mono full range operation.
Selectable tube and solid state preamps. Bass and
treble contour control. 10-band graphic EQ.
Adjustable compression and variable active
crossover with balance control. Balanced XLR output.
7000
350 watts per side at 4 ohms/240 watts per side at
8 ohms. Biamp or mono full range operation.
Selectable tube and solid state preamps. Bass and
treble contour control and 10-band Graphic EQ.
Adjustable compression. Variable active crossover
with balance control. Balanced XLR output.
1994
4000 ▲
The latest in Hartke amp technology. Unparalleled input and output capability in one rack space. 400 watts at
4 ohms. Studio 4-band EQ with swept mids. Shape circuit with variable intensity control. Deep bass enhancer.
Balanced preamp out, direct out, line out and SBass subwoofer line out. Pre and post-EQ effects send and
return. Audio Mute switch mutes all outputs for on-stage tuning. Independently buffered inputs.
1996
Hartke introduces 4.5XL with 5” aluminum cone high
frequency driver.
1998
Hartke invents the now widely imitated Kickback combo
format.
Hartke introduces B-Series, an affordable combo line.
1999
Hartke introduces the 3000 and 4000 Professional
model amplifiers.
13
14
B Series
A Series
15
The all-new A Series combos bring the legendary sound of Hartke to studios and small clubs. Authentic aluminum
The new B Series combos make the Hartke sound available to everyone. Rugged and portable, B Series combos offer
cone speakers and Hartke amplifier technology built in. Perfect for practice, A Series combos offer flexible tone con-
a great-sounding and affordable entry into the world of Hartke.
trols, kickback cabinets and a size that is right for everyone.
A25
A35
A70
A100
B900
B600
B300
B200
B150
The A25 gives you Hartke sound
in a small package. 25 watts and
an 8” aluminum speaker. Low,
Mid, High and Bright tone
controls. CD input, XLR balanced
outputs, effects loop,
headphone jack and
chrome hardware.
35 watts and a 10” aluminum
driver, Low, Mid, High and Bright
tone controls. CD input, XLR
balanced outputs, effects loop,
headphone jack and chrome
hardware.
The 70 Watt A70 has a 12”
speaker and adds a 7 band
graphic EQ for finer tone control. It also has a variable limiter
built-in. CD input, XLR balanced
outputs, passive and active
inputs, effects loop, headphone
jack and chrome hardware.
Great all around combo,
particularly great for
acoustic bass.
The biggest A Series features
100 watts and a 15” aluminum
speaker. It features a 7 band
graphic EQ for finer tone control. It also has a variable limiter
built-in. CD input, XLR balanced
outputs, passive and active
inputs, effects loop, headphone
jack and chrome hardware.
90 watts and a full-range
15” Hartke bass driver in
a new kickback format.
3-band EQ and
adjustable Shape
circuitry. Effects loop and
buffered inputs. Line
level output and
headphone output.
12” bass driver and 60
watts of power in a newly
designed kickback
cabinet. 3 bands of EQ
and adjustable Shape
circuitry. Like other
B Series combos, the
B600 features a dedicated
effects loop, line level out,
a buffered input and a
headphone output.
The B300 combines a 10”
bass driver and 30 watts
of power. 3-band EQ and
a preset Shape circuit.
Dedicated effects loop,
buffered input, a line
level output and
headphone output.
Small but serious.
20 watts of power and
8” driver. 3-band EQ with
special Shape circuitry.
Rugged, reinforced
cabinet, effects loop, line
out, buffered input and
headphone out.
A great practice amp, the
B150 features a 6.5”driver
that sounds full and
punchy despite its
compact size. It is driven
by a 15 Watt amp and
includes a 3-band EQ, an
effects loop and line and
headphone outputs.
1999
2001
Hartke releases high-end XL-4 and XK-4 basses with aluminum core neck.
Hartke introduces a new line of Professional Series cabinets including the award winning 4200,
featuring a 2” titanium mid-high horn driver. Hartke wins the MIPA award for best bass cabinets.
16
Gig Packs & Guitars
Kickbacks
17
Bass Gig Pack ▼
Everything the beginner needs to get up and running as a bassist.
The pack includes the new SB-15 electric bass, our B15 Combo amp, a gig bag, a strap and guitar cable.
Flexible enough to be played upright or “kicked back” as a monitor, our Kickback quickly became one of the most
imitated (but never duplicated) designs in bass gear. Available in three different versions, there’s a kickback for every
The B15 combo amp features a 6.5 inch driver that sounds full and punchy despite its compact size. It is driven by a 15 Watt amp and
includes a 3-band EQ, an effects loop and line and headphone outputs.
▲
application – from practice and rehearsal to club dates and small theater venues.
The sb-15 guitar has a contoured wood composite body and maple neck with a rosewood fingerboard and 24 frets. It has a PJ pickup
configuration, black hardware, adjustable truss rod, two volume and one tone controls, dot position markers the fingerboard and side of
neck. The SB15 is available in black or red.
SB15
The entry-level Hartke
SB15 has a contoured
wood composite body
and maple neck with a
rosewood fingerboard
and 24 frets. It has a PJ
pickup configuration,
black hardware,
adjustable truss rod, two
volume and one tone
controls, dot position
markers the fingerboard
and side of neck.
The SB15 is available in
black or red.
Kickback 12
Kickback 15
The compact option of our trend-setting
“two-way” kickback-style cabinet design.
A Hartke 10” aluminum-cone driver and 120
watts of power at 8 ohms. Shape control for
maximum tonal options. 3-band EQ,
Passive/Active input jack, and balanced
XLR output.
The original Kickback. Hartke 12” aluminumcone driver. 120 watts at 8 ohms.
Wide-ranging Shape control for more tone
colors. 3-band EQ, Passive/Active input jack,
and balanced XLR output.
The “big bottom” Kickback combo. Versatile
“two-way” design with all the bass you’ll
ever need. Massive Hartke 15” aluminumcone driver. 120 watts at 8 ohms.
Fully adjustable Shape control. 3-band
EQ, Passive/Active input jack, and balanced
XLR output.
CK4
▲
Kickback 10
Beautifully crafted, incredible sounding and affordable, CK Series 4-string basses
have Basswood bodies, maple necks and 24 fret rosewood fingerboards. The
feature a “PJ” pickup configuration, a chrome bridge, and dual tone and volume
controls. CK4s are available in black and cherry red.
2002
2003
Hartke releases the VX Series of affordable full-size cabinets, the first Hartke cabinets with paper cone drivers.
Hartke introduces new A Series line of affordable bass combos
XL SERIES
4.5XL (4x10” Aluminum+5” HF driver )
Power Handling: 400 watts @ 8 Ohms; Frequency
Response: 30 Hz To 12 kHz; Sensitivity: 99 dB @
1W/1m; Voice Coils: 1.5”& 1” ; Magnet Weights: 60 oz.
and 16 oz.; Parallel 1/4” Inputs; Dimensions:
26.5” (H) x 24” (W) x 18” (D); Weight: 99 lb.
410XL (4x10” Aluminum)
Power Handling: 400 watts @ 8 Ohms; Frequency
Response: 30 Hz To 5 kHz; Sensitivity: 98 dB @ 1W/1m;
Voice Coil: 1.5”; Magnet Weight: 60 oz.
Parallel 1/4” Inputs; Dimensions: 24” (H) x 24” (W) x 15”
(D); Weight: 88 lb.
115XL (1x15” Aluminum)
Power Handling: 200 watts @ 8 Ohms; Frequency
Response: 30 Hz To 2.5 kHz; Sensitivity: 98 dB @
1W/1m; Voice Coil: 3”; Magnet Weight: 100 oz. Parallel
1/4” Inputs; Dimensions: 24” (H) x 24” (W) x 15” (D);
Weight: 63 lb.
810XL (8x10” Aluminum)
Power Handling: 800 watts @ 4 Ohms; Frequency
Response: 40 Hz To 5 kHz; Sensitivity: 100 dB @
1w/1m/2v; Voice Coil: 1.5”; Magnet Weight: 60 oz.;
One1/4” Input; Dimensions: 48” (H) x 24” (W) x 16” (D);
Weight: 145 lb.
210XL (2x10” Aluminum)
Power Handling: 200 watts @ 8 Ohms; Frequency
Response: 50 Hz To 5 kHz; Sensitivity: 96 dB @ 1W/1m;
Voice Coil: 1.5”; Magnet Weight: 60 oz.; Single 1/4”
Input; Dimensions: 14” (H) x 24” (W) x 12” (D); Weight:
46 lb.
2.5XL (2x10” 1x5” Aluminum +5” driver)
Power Handling: 200 watts @ 8 Ohms; Frequency
Response: 35 Hz To 12 kHz; Sensitivity: 99 dB @
1W/1m; Voice Coils: 1.5” and 1”; Magnet Weights: 60
oz. and 16 oz.; 1/4” Input; Dimensions: 18” (H) x 24”
(W) x 18” (D); Weight: 66 lb.
215XL (2x15” Aluminum)
Power Handling: 400 watts @ 4 Ohms; Frequency
Response: 30 Hz To 1 kHz; Sensitivity: 99 dB @ 1W/1m;
Voice Coil: 3”; Magnet Weight: 100 oz.; Parallel 1/4”
Inputs; Dimensions: 34” (H) x 24” (W) x 18.5” (D);
Weight: 110 lb.
1800 (1x18” Aluminum)
Model 3500
A70 (1x12” Aluminum)
Power Handling: 600 watts @ 4 Ohms; Frequency
Response: 28 Hz To 300 Hz; Voice Coil: 3”; Magnet
Weight: 120 oz.; One 1/4” and one Speakon Input;
Dimensions: 30.75” (H) x 24” (W) x 18” (D); Weight: 94 lb.
Power: 350 watts @ 4 Ohms; THD: Less Than .5% •
Signal-To-Noise: Approx. 78 dBm; Effects Send and
Return; Bipolar Design; Passive/Active Input Jack;
Rack-Mountable Dimensions: 3.75” (H) x 19” (W) x 13”
(D); Weight: 25 lb.
Power: 70 watts; 12” aluminum driver; 7 Band EQ;
Variable Limiter; CD input; XLR balanced output;
Passive and active outputs; Effects loop;
Headphone jack; Chrome hardware; Dimensions:
18.62”(H) x 16.7”(W) x 15.15” (D); Weight: 44 lbs
Model 5000
A100 (1x15” Aluminum)
Power: 250 watts per side @ 4 Ohms; THD: Less Than
.5%; Signal-To-Noise: Approx. 68 dBm; Biamp Or Mono
Full Range Operation; D.C. Brushless Fan-Cooled;
Effects Send and Return; Passive/Active Input Jack;
Rack-Mountable; Dimensions: 3.75” (H) x 19” (W) x
13” (D); Weight: 28.5 lb.
Power: 100 watts; 15” aluminum driver; 7 Band
EQ; Variable Limiter; CD input; XLR balanced output; Passive and active outputs; Effects loop;
Headphone jack; Chrome hardware; Dimensions:
21.7”(H) x 18.2”(W) x 15.8”(D); Weight: 50.7lbs
Model 7000
B SERIES COMBOS
Power: 350 watts per side @ 4 Ohms; THD: Less Than
1%; Signal-To-Noise: Approx. 78 dBm; Biamp Or Mono
Full Range Operation; D.C. Brushless Fan-Cooled;
Effects Send and Return; Passive/Active Input Jack;
Rack-Mountable; Dimensions: 3.75” (H) x 19” (W) x 13”
(D); Weight: 29.5 lb.
B150 (1x8” Paper)
2200 (2x12” Aluminum + 1” HF driver)
Power Handling: 300 watts @ 4 Ohms; Frequency
Response: 29 Hz To 16 kHz; One 1/4” and one
Speakon Input; Dimensions: 27” (H) x 19” (W) x 18” (D);
Weight: 74.35 lb.
2100 (2x10” Aluminum + 1” HF driver)
Power Handling: 300 watts @ 8 Ohms; Frequency
Response: 34 Hz To 16 kHz; One 1/4” and one
Speakon Input; Dimensions: 23.4” (H) x 17.4” (W) x 18”
(D); Weight: 60.5 lb.
TRANSPORTER SERIES
410TP (4x10” Aluminum)
Power Handling: 300 watts @ 8 Ohms; Frequency
Response: 40 Hz To 4 kHz; Sensitivity: 96 dB @ 1W/1m;
Voice Coil: 1.5”; Magnet Weight: 40 oz.; Single 1/4”
Input; Dimensions: 24” (H) x 24” (W) x 15” (D);
Weight: 65 lb.
115TP (1x15” Aluminum)
Power Handling: 150 watts @ 8 Ohms; Frequency
Response: 40 Hz To 2.5 kHz; Sensitivity: 96 dB @
1W/1m; Voice Coil: 2”; Magnet Weight: 60 oz.; Single
1/4” Input; Dimensions: 24” (H) x 24” (W) x 15” (D);
Weight: 51 lb.
210TP (2x10” Aluminum)
Power Handling: 150 watts @ 8 Ohms; Frequency
Response: 50 Hz To 4 kHz; Sensitivity: 94 dB @ 1W/1m;
Voice Coil: 1.5”; Magnet Weight: 40 oz.; Single 1/4”
Input; Dimensions: 14” (H) x 24” (W) x 12” (D); Weight:
36 lb.
VX SERIES
4200 (4 x 10 Aluminum +2” HF driver)
Power Handling: 400 watts @ 4 Ohms; Frequency
Response: 30 Hz To 15 kHz; Sensitivity: 1m/1w /2v 99db; Voice Coil: 3”; Magnet Weight: 60 oz.; One 1/4”
and one Speakon Input; Dimensions: 31” (H) x 24” (W)
x 18” (D) • Weight: 117 lb.
Power: 140 watts @ 4 Ohms; THD: 0.05% • Signal-ToNoise: 68.6 dBm; Bipolar Design; Passive/Active Input
Jack; Headphone Out; Effects Send and Return;
Dimensions: 2.75” (H) x 17.56” (W) x 10 3/4” (D) •
Weight: 13 lb.
Model 3000
AMPLIFIERS
Power: 30 watts; Effects Send and Return; Signal-ToNoise: 66 dB; Dynamic Range: 75 dB; Dimensions:
17.1” (H) x 14.7” (W) x 9.5” (D); Weight: 32 lb.
B900 (1x15” Paper)
Power: 400 watts @ 4 Ohms; THD: Less Than 0.1%;
Signal-To-Noise: Approx. 78 dBm; Effects Send and
Return; Bipolar Design; Toroidal Power Supply; RackMountable; Dimensions: 3.75” (H) x 19” (W) x
13.5” (D); Weight: 26.5 lb.
Power: 90 watts; Effects Send and Return; Signal-ToNoise: 70 dB; Dynamic Range: 90 dB; Dimensions:
22.1” (H) x 18.5” (W) x 15.2” (D); Weight: 47.5 lb
A25 (1x8” Aluminum)
Power: 350 watts @ 4 Ohms; THD: Less Than .5%;
Signal-To-Noise: Approx. 78 dBm; Effects Send and
Return; Bipolar Design; Passive/Active Input Jack;
Dimensions: 29.7” (H) X 25” (W) X 15” (D) 106 lb.
B300 (1x10” Paper)
Model 4000
Power: 400 watts @ 8 Ohms; Two 1/4” inputs;
Dimensions: 25” (H) X 25” (W) X 15” (D) 70 lb.
Power: 300 watts @ 8 Ohms; Two 1/4” inputs;
Dimensions: 25” (H) X 25” (W) X 15” (D) 69 lb.
Power: 20 watts; Effects Send and Return; Signal-ToNoise: 67 dB; Dynamic Range: 80 dB; Dimensions:
14.6” (H) x 15” (W) x 9.5” (D); Weight: 25.5 lb.
B600 (1x12” Paper)
A SERIES COMBOS
VX115 (1 x15” Paper + 1” HF driver)
B200 (1x8” Paper)
Power: 300 watts @ 4 Ohms; THD: Less Than 0.1% •
Signal-To-Noise: Approx. 78 dBm; Bipolar Design;
Toroidal Power Supply; Rack-Mountable; Dimensions:
3.75” (H) x 19” (W) x 13.5” (D) • Weight: 23 lb.
VX410 (4 x10” Paper + 1” HF driver)
VX3500 (4 x10” Paper + 1” HF driver)
PROFESSIONAL SERIES
Model 1400
Power: 15 watts; Effects Send and Return; Signal-ToNoise: 67 dB; Dynamic Range: 80 dB; Dimensions:
13.5” (H) x 15” (W) x 8.7” (D); Weight: 23.2 lb.
Power: 25 watts; 8” aluminum driver; Low, Mid, High
and Bright tone control; CD input; XLR balanced output; Effects loop; Headphone jack; Chrome hardware;
Dimensions: 14.8” (H) x 13.4” (W) x 12.1” (D);
Weight: 33lbs
Power: 60 watts; Effects Send and Return; Signal-ToNoise: 65 dB; Dynamic Range: 80 dB; Dimensions: 19”
(H) x 18.5” (W) x 14.6” (D); Weight: 39.5 lb.
KICKBACK COMBOS
Kickback 10 (1x10” Aluminum)
Power: 120 watts @ 4 Ohms; Passive/Active Input
Jack; Balanced XLR Output; Dimensions: 16” (H) x
15.5” (W) x 12” (D); Weight: 30 lb.
Kickback 12 (1x12” Aluminum)
Power: 120 watts @ 4 Ohms; Passive/Active Input
Jack; Balanced XLR Out; Dimensions: 19” (H) x 15.5”
(W) x 16” (D); Weight: 42 lb.
A35 (1x10” Aluminum)
Kickback 15 (1x15” Aluminum)
Power: 35 watts; 10” aluminum driver; Low, Mid, High
and Bright tone control; CD input; XLR balanced output; Effects loop; Headphone jack; Chrome hardware;
Dimensions: 16.6” (H) x 15” (W) x 12.6” (D); Weight:
37.4 lbs
Power: 120 watts @ 4 Ohms; Passive/Active Input
Jack; Balanced XLR Out; Dimensions: 21.75” (H) x
18” (W) x 16.75” (D); Weight: 47 lb.
Model 2000
Power: 200 watts @ 4 Ohms; THD: Less Than 1%;
Signal-To-Noise: Approx. 70 dBm; Effects Send and
Return; Bipolar Design; Passive/Active Input Jack;
Rack-Mountable; Dimensions: 3.75” (H) x 19” (W) x
13” (D) • Weight: 19.5
All specifications subject to change without notice.