Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION C

Transcription

Jones Stephens Corp. • PlumBest™ • LTConnections™
SECTION C - MISC. PLUMBING SPECIALTIES
Repair..................................................................................... 91-92
Test Caps & Plugs..................................................................... 93-94
Flexible Transition Couplings.......................................................... 95
Dishwasher/Washing Machine Parts.............................................. 96
C
Dryer Vents.............................................................................. 97-98
Tape............................................................................................. 99
Pipe Sleeving/Sand Cloth............................................................ 100
Rubber Insulation................................................................. 101-104
Poly Insulation...................................................................... 105-107
Insulation Tools/Dielectric Union................................................... 108
Water Heater Connectors............................................................. 109
Water Heater Supplies................................................................. 110
Pressure Gauges.................................................................. 111-112
Tubing........................................................................................ 113
Stud Guards........................................................................ 114-116
Hooks & Nails............................................................................ 117
Pipe Strap/Clamps...................................................................... 118
Hanger Tape/Packing.................................................................. 119
Lead Supplies/Roofing Repair...................................................... 120
Service Sink Repair..................................................................... 121
Bolts & Screws............................................................................ 122
Washers/Clamps........................................................................ 123
Conduit Hanger.......................................................................... 124
Water Meter Supplies.................................................................. 125
Meter Boxes......................................................................... 126-127
Boxes......................................................................................... 128
89
Repair
Snap-Ease Access Panel
Malleable Iron Compression Coupling
• EPDM gaskets
• Metal friction ring
• Maximum 125 PSI at 120°F
• Pipe ends must be restrained
• Fits both IPS and Schedule 40 pipe
• Galvanized for corrsion protection
• Can be painted or wallpapered
• Constructed of high-impact white ABS
• Easily installed to eliminate unsightly drywall repairs
• Provides for future access to plumbing or wiring behind wall
• 5/8” depth
PART NO.
A04006
A05008
A05014
A05027
SIZE
6” x 9”
8” x 8”
14” x 14”
14” x 27”
CTN/MSTR
10/80
1/10
10/30
1/6
Plastic Access Panel
• Beveled edges
• Indented screw holes in corners
PART NO.
A04012
SIZE
12” x 12”
CTN/MSTR
1/20
Stainless Steel Repair Clamp
• Plated lug, carriage bolt and nuts
for corrosion protection
• 301 stainless steel clamp with
neoprene gaskets for up to 180°F
• Long neck carriage bolts for easy
installation
Two Bolt
One Bolt
IPS/SCH 40
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
CTS NOM
1/2”
3/4”
1”
1 1/4”
1 1/2”
-
CTN/MSTR
6/72
6/72
6/72
6/72
6/72
6/72
6/72
6/48
6/36
6/24
1/36
IPS/SCH 40
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
CTS NOM
1/2”
3/4”
1”
1 1/4”
1 1/2”
-
CTN/MSTR
6/36
6/36
6/36
6/36
6/36
6/36
6/36
6/24
6/24
6/24
1/20
6” Two Bolt
PART NO.
R60375
R60050
R60075
R60100
R60125
R60150
R60200
R60250
R60300
R60400
R60600
PART NO.
C11050
C11075
C11100
C11125
C11150
C11200
C11250
C11300
C11400
IPS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
BODY LENGTH
3 3/8”
3 5/8”
3 7/8”
4 1/8”
4 5/16”
4 1/2”
6 3/4”
7”
8 1/8”
CTN/MSTR
1/42
1/32
1/24
1/18
1/15
1/12
1/4
1/4
1/2
C
Bronze Compression Coupling
• EPDM gaskets
• Bronze coated brass bodies and nuts
• Maximum 125 PSI at temperatures up to 180°F
• Pipe ends must be restrained on both ends
• For use on galvanized pipe and copper tubing (check sizes)
3” Length
PART NO.
C14050
C14075
C14100
CTS
1/2”
3/4”
1”
IPS
3/8”
1/2”
3/4”
CTN/MSTR
1/120
12/120
12/72
CTS
1/2”
3/4”
1”
IPS
3/8”
1/2”
3/4”
CTN/MSTR
1/120
12/72
12/72
CTS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
-
IPS
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN/MSTR
1/96
12/72
12/48
12/48
12/36
1/36
1/30
12/24
CTS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
-
IPS
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN/MSTR
1/96
12/72
12/48
12/48
12/36
12/36
1/30
12/24
LEAD FREE
3” One Bolt
PART NO.
R30375
R30050
R30075
R30100
R30125
R30150
R30200
R30250
R30300
R30400
R30600
Long Pattern
PART NO.
C14205
C14206
C14207
5” Length
PART NO.
C15050
C15075
C15100
C15125
C15150
C15151
C15200
C15201
LEAD FREE
PART NO.
C15300
C15301
C15302
C15303
C15304
C15305
C15306
C15307
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
91
Repair
PVC Compression Coupling
Compression Tee
Malleable Iron
• For use on cold water lines only
• Ribbed body and nuts for gripping
• Fits IPS and Schedule 40 pipe
• EPDM gaskets
• 150 PSI at 73°F
C
PART NO.
C12050
C12075
C12100
C12125
C12150
C12200
C12250
C12300
C12400
C12600
IPS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
6”
BODY LENGTH
3 3/4”
3 15/16”
4 3/4”
5 3/16”
5 3/8”
6”
7 7/8”
8”
12”
11 1/8”
CTN/MSTR
30/120
30/120
25/100
25/100
15/60
6/24
1/15
1/18
1/4
1/2
• Galvanized for corrosion protection
• Metal friction ring
• Compression tees must be restrained on both ends
• EPDM gaskets
• FIP branch
• 125 PSI at 120°F
PART NO.
C16050
C16075
SIZE
1/2”
3/4”
Compression Tee
Bronze
• FIP branch
• EPDM gaskets
• Bronze coated brass bodies and nuts
• Maximum 125 PSI at temperatures up to 180°F
• For use on galvanized pipe and copper tubing (check
sizes)
PVC Expansion Coupling
• Rated 200 PSI
PART NO.
E09050
E09075
E09100
E09125
E09150
E09200
E09250
E09300
E09400
IPS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
BODY LENGTH
5 3/4”
6 3/4”
7 3/4”
9”
10”
10 1/2”
13”
14 1/2”
14 1/2”
CTN/MSTR
1/160
1/120
1/54
1/40
1/35
1/24
1/3
1/3
1/3
CPVC Compression Coupling
• For use on hot water lines
• 100 PSI at temperatures up to 180°F
• Tubing sizes copper and plastic tubing
• EPDM gaskets
PART NO.
C13050
C13075
TUBING SIZE
1/2” (5/8” OD)
3/4” (7/8” OD)
CTN/MSTR
20/360
20/240
PART NO.
C19050
C19051
C19075
CTS
1/2”
3/4”
3/4”
IPS
3/8”
1/2”
1/2”
BRANCH
1/2” FIP
1/2” FIP
3/4” FIP
CTN/MSTR
1/12
1/96
1/12
Compression Tee
PVC
• For use on cold water lines only
• EPDM gaskets
• 150 PSI at 73°F
• Threaded branch
PART NO.
C17050
C17075
C17100
C17125
C17150
C17200
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN/MSTR
1/25
24/120
15/60
1/40
1/20
1/20
Economy Test Plug
• Molded rubber gasket
• Galvanized steel flanges
• Fits cast iron and plastic pipe
PART NO.
T31001
T31002
T31003
T31004
T31006
T31000
92
CTN/MSTR
1/12
1/12
PIPE SIZE
1 1/2”
2”
3”
4”
6”
Replacement wing nut
CTN/MSTR
24/192
24/96
24/48
24/48
4/16
1/10
Test Caps and Plugs
Combination Test Plug
Raised Head
Raised Head
Countersunk
PART NO.
T34001
T34002
T34003
T34004
T34006
T34008
Flexible PVC Test Cap
• Test up to three floors at once
• Combination test plug and
cleanout
• Fits Schedule 40 DWV pipe
• Positive sealing
• No metal parts to rust
PIPE SIZE
1 1/2”
2”
3”
4”
6”
8”
CTN/MSTR
1/392
1/288
1/200
1/128
1/54
1/24
PIPE SIZE
2”
3”
4”
CTN/MSTR
1/288
1/200
1/128
Countersunk
PART NO.
T34012
T34013
T34014
• Reinforced top
• 5/16” hex screw with screwdriver slot
• Fits both cast iron and plastic pipe
PART NO.
T32001
T32002
T32003
T32004
T32006
T32008
T32011
T32022
T32033
T32044
PART NO.
T34150
T34200
T34300
T34350
T34400
PIPE SIZE
1 1/2”
2”
3”
3 1/2”
4”
THREAD ID
1.780
2.255
3.375
3.900
4.336
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
“Plum-Tite” Mechanical Test Plugs
• Neoprene gasket
• Extra large wingnut
• Rust and corrosion proof
• High density plastic construction
PART NO.
T37001
T37002
T37003
T37004
T37006
T37008
SIZE
1 1/2”
2”
3”
4”
6”
8”
CTN/MSTR
10/200
10/150
10/40
10/40
5/20
5/10
Cast Iron Test Plug
• Maximum 10 PSI
• To test cast iron soil pipe drainage systems
• Cold water ONLY
PART NO.
T39002
T39003
T39004
T39006
T39008
T39010
T39012
PIPE SIZE
2”
3”
4”
6”
8”
10”
12”
CTN/MSTR
24/288
24/288
24/144
1/50
1/24
1/16
1/200
1/100
1/50
1/50
C
PVC Dual Fit Test Cap
• Each cap fits two sizes of Schedule 40 pipe
• CARTON QUANTITIES ONLY
T-Cone Cleanout Repair Plugs
• Easily repairs damaged or corroded metal or plastic
cleanout threads
PIPE SIZE
1 1/2”
2”
3”
4”
6”
8”
1 1/2”
2”
3”
4”
PART NO.
T33152
T33304
PIPE SIZE
1 1/2” and 2”
3” and 4”
CTN QTY
100
50
Slip-On Plastic Cap
• DWV protection cap in various colors
• Protects from debris during construction
PART NO.
T36150
T36200
T36300
T36400
T36600
SIZE
1 1/2”
2”
3”
4”
6”
CTN/MSTR
300
200
75
1/45
1/25
Techno Test Plug Cap
• Heavy duty PVC, high pressure tested over six stories
• Easily solvent cemented over end of DWV pipe
• Will not clog or go down pipe
PART NO.
T35001
T35002
T35003
T35004
DESCRIPTION
1 1/2” DWV
2” DWV
3” DWV
4” DWV
CTN QTY
100
100
50
25
PVC Test Cap
CTN QTY
1
1
1
1
1
1
1
• Easily solvent cemented over end of DWV pipe
PART NO.
T35201
T35202
T35203
T35204
T35206
DESCRIPTION
1 1/2” PVC Test Cap
2” PVC Test Cap
3” PVC Test Cap
4” PVC Test Cap
6” PVC Test Cap
CTN/MSTR
100/1000
100/1000
50/250
25/250
1/100
93
Test Caps and Plugs
Knockout Test Cap
Inflatable Tee Plug
• For use in plastic waste and drain pipe
• Disposable
C
PART NO.
T33001
T33002
T33003
T33004
• Threads directly into test tee
• Threads into both CI and plastic pipe
• Body is high quality natural rubber
• Top is made from high impact ABS plastic
PIPE SIZE
1 1/2”
2”
3”
4”
CTN/MSTR
100/5000
100/1900
50
50/3600
Pneumatic Test Plug
Regular
• Manufactured in the USA
• All units smaller than 8” are
supplied with chain and ring
• All units 8” or larger are supplied with a removable eye bolt
• For use with cast iron, PVC, ABS, copper, clay
and concrete pipe
Long
Inflated Test Plug
PART NO.
T33200
T33300
T33400
DESCRIPTION
2” Inflatable Tee Plug
CTN/MSTR
6/36
1/6
1/6
Drain King®
D18501
D18186
D18034
D18750
D18560
D18340
Regular
PART NO.
T45150
T45200
T45300
T45400
T45600
T45800
T45010
T45012
CTN/
MSTR
1/6
1/6
1/6
1/4
1
1
1
1
NOM. PIPE
SIZE
MAX AIR
PRESSURE
MAX TEST
PRESSURE
MAX
HEAD
1 1/4”-1 1/2”
2”
3”
4”
6”
8”
10”
12”
40 PSI
40 PSI
35 PSI
30 PSI
25 PSI
25 PSI
25 PSI
25 PSI
5 PSI
5 PSI
5 PSI
5 PSI
5 PSI
15 PSI
15 PSI
15 PSI
30’
30’
30’
30’
30’
40’
40’
40’
NOM. PIPE
SIZE
MAX AIR
PRESSURE
MAX TEST
PRESSURE
MAX
HEAD
CTN QTY
2”
3”
4”
45 PSI
35 PSI
30 PSI
5 PSI
5 PSI
5 PSI
30’
30’
30’
1
1
1
Long
PART NO.
T46200
T46300
T46400
Pneumatic-Hydraulic Test Plug
• Uses either water or air
• Temperature range 30° - 200°F
• User safe; cannot be overinflated
• Individually tested for 24 hours to insure proper operation
• Using water, stack can be filled and plugged from same
position
PART NO.
T30002
T30034
T30046
T30068
T30102
PIPE SIZE
1 1/4”-2”
3”-4”
4”-6”
5”-8”
10”-12”
MFG PART NO.
WATP 2
WATP 3-4
WATP 4-6
WATP 6-8
WATP 10-12
CTN/MSTR
1/6
1/10
1
1
1
Two Stage Long Test Plug
• Two stage deflation allows access pipe to remain sealed
while water clears drain line
• Insert in drain line opening
• Turn water on
• Automatically seals drain and powerful water pulses loosen and clear drain
PART NO.
PIPE SIZE
1”-2”
D18501
1 1/2”-3”
D18186
3”-4”
D18034
3”-6”
D18750
6”-10”
D18850
1”-2” with drain adapter
D18560
D18340 1 1/2”-3” with 10” hose and faucet adapter
Drain Adapter
D18060
DK NO. CTN/MSTR
D501
1/12
D186
12/144
H34
1/6
D750
1/6
D850
1
H560
1/5
PE60
1/12
PE60
1/12
Plumbjet
• Attaches to garden hose
• All natural
• Environmentally safe
D18400
PART NO.
D18400
D18401
D18402
D18401
D18402
PIPE SIZE
1”-2”
1 1/2”-3”
4”-6”
DK NO. CTN/MSTR
D501
10/60
D186
10/60
H34
10/40
Extension Hose
• For pneumatic test plug
• Can be used in tandem
PART NO.
T45002
T45003
SIZE
2’
3’
CTN QTY
1
1
Force Cup Plunger
• Supplied with handle
• Highest quality rubber plungers
PART NO.
T30203
T30304
94
PIPE SIZE
2”-3”
3”-4”
MFG PART NO.
DDO203
DDO304
CTN QTY
1
1
Red Rubber
Black Rubber
PART NO. DESCRIPTION
5 1/2” diameter (red rubber)
D18001
6” professional style (black rubber)
D18002
CTN QTY
12
12
Flexible Transition Couplings
Professional Force Cup Display
Flexible Transition Coupling
• Supplied with handle
• Highest quality rubber plungers
• Attractive point of purchase display
• Display box contains 30 rubber plungers
• EPDM rubber
• UPC listed
• For use on PVC, DWV and CI pipe
• Stainless steel clamps and housing
T06320
Cloghopper Display
Rubber plungers and display box
D18000
CTN QTY
30
Flexible PVC Saddle Fitting
Tee Pattern
Tee Pattern
Wye Pattern
• Provided with stainless steel
clamp on inlet
• Includes stainless steel
clamps on saddle to fit up to
12” clay pipe
• Extension clamps may be
used for larger pipe sizes
4” plastic-12” clay saddle x 4” Sch.40 CI or SDR35
S26001
inlet
4” plastic - 6” clay saddle x 4” Sch.40 CI or SDR35
S26002
inlet
S26003 4” saddle blanket
CTN/MSTR
1
PART NO.
T06025
T06050
T06200
T06250
T06300
T06320
T06400
T06430
T06600
T06640
T06800
T06400
DESCRIPTION
1 1/4” PL + CI to PL + CI
1 1/2” PL + CI to PL + CI
2” PL + CI to PL + CI
2” x 1 1/2” PL + CI to PL + CI
3” x 2” PL + CI to PL + CI
CTN/MSTR
1/300
1/150
1/105
1/105
1/60
1/80
1/36
1/44
1/12
1/15
1/6
C
Bore O-Ring
1
1/6
Wye Pattern
CTN QTY
4” plastic - 12” clay saddle x 4” Sch. 40 cast iron or
1
S27001
SDR35 inlet
4” plastic - 6” clay saddle x 4” Sch. 40 cast iron or
1
S27002
SDR35 inlet
6” bore x 4” plastic or cast iron
B12640
CTN/MSTR
1/60
Qwik Tee
Replacement Clamp
4”-12” gear clamp
S26100
CTN/MSTR
1/100
Flexible Trap Drain Connector
PART NO.
T06001
T06002
T06003
T06004
DESCRIPTION
CTN/MSTR
Connects 1 1/4”-1 1/2” tubular to 1 1/4”-1 1/2” tubular
1/180
Connects 1” DWV or 1 /2” CTS to 1 1/4”-1 1/2” tubular
1/100
Connects 1 1/2” DWV or CTS to 1 1/4”-1 1/2” tubular
1/100
Connects 2” DWV to 1 1/4”-1 1/2” tubular
1/100
PART NO.
T07150
T07200
T07300
T07400
DESCRIPTION
1 1/2” x 1 1/2” x 1 1/2” tee
2” x 2” x 2” tee
3” x 3” x 3” tee
4” x 4” x 4” tee
CTN/MSTR
1/50
1/20
1/20
1/6
Qwik Elbow
PART NO.
E10150
E10200
E10300
E10400
DESCRIPTION
1 1/2” x 1 1/2” elbow
2” x 2” elbow
3” x 3” elbow
4” x 4” elbow
CTN/MSTR
1/50
1/20
1/20
1/6
Bushing for Qwik Tees and Qwik
Elbows
PART NO.
B12210
B12320
B12430
DESCRIPTION
2” x 1 1/2” bushing
3” x 2” bushing
4” x 3” bushing
CTN/MSTR
1/24
1/24
1/24
95
Dishwasher/Washing Machine Parts
Hose Grip Clothes Washer Connector
• Fits 1 1/2” or 2” standpipe
• Fits 1” - 1 7/16” drain hose
• Securely holds drain hose in standpipe
C
Drain hose connector
D08001
Icemaker Boxes with Hammer
Arrester
• 1/4 Turn valve
CTN/MSTR
1/100
Flexible Drain Trap
B05925
B05926
Icemaker box with Solder connection
B05925
Icemaker box with CPVC connection
B05926
CTN/MSTR
1/10
1/10
Icemaker Boxes with Valves
1 1/4” or 1 1/2” tubular trap j-bend
J01001
CTN QTY
1/20
Washing Machine Boxes with Valves
• Long shank MIP valve
• White box with valve installed
• Combo 1 1/2” or 2” drain
B05900
• White box with valve installed
CTN/MSTR
Icemaker box with brass valve
1/10
B05910
Icemaker box with Flowguard all CPVC icemaker
1/10
B05911
valve
Dishwasher Hose
• IAPMO/UPC listed; meets ANSI, AHAM-DWI specifications
• 5/8” connects dishwasher pump to airgap inlet or dishwasher tailpiece
• 7/8” connects airgap outlet to branch tailpiece or disposal
• EPDM material with single spiral reinforcement
• Resists kinking
• Marked per foot
• -40°F to +180°F
B05901
Offset drain
B05900
Center drain
B05901
CTN/MSTR
1/10
1/10
Washing Machine Boxes with
Hammer Arrester
PART NO.
D10625
D10875
SIZE
5/8” ID x 50’
7/8” ID x 50’
WP
90
70
BURST PRESSURE
200
100
CTN QTY
1
1
Dishwasher Drain Connector
B05920
B05921
• Includes two worm gear clamps
B05922
Universal connector
D10001
B05923
CTN/MSTR
50/200
Washing Machine Hose
B05924
• 1/4 Turn valves or lever handle mixer valve
Dual Drain
PART NO.
B05920
B05921
B05922
DESCRIPTION
1/4 Turn valve with Solder connection
1/4 Turn valve with CPVC connection
Single lever handle with Solder connection
CTN/MSTR
1/10
1/10
1/10
With 90° Elbow
CTN/MSTR
1/10
1/10
PART NO.
J04104
J04105
J04106
Center Drain
1/4 Turn valve with Solder connection
B05923
1/4 Turn valve with CPVC connection
B05924
Replacement Frame
Replacement Frame for Washer Box
B05927
Replacement Frame for Icemaker Box
B05928
96
CTN/MSTR
1/10
1/10
Straight Female
With 90° Elbow
• For hot or cold use
• Bagged with washers
• Standard female hose threads
• Bursting pressure 800 lbs. per
sq. inch
• 3/8” ID
LENGTH
4’
5’
6’
CTN/MSTR
1/12
1/12
1/12
LENGTH
4’
5’
6’
CTN/MSTR
1/12
1/12
1/12
Straight Female
PART NO.
J04004
J04005
J04006
Dryer Vents
Washing Machine Hose
Dryer Vent Hood
• PVC hood
• Weather proof 12” aluminum extension
• Pre-punched mounting holes
• Industrial quality
• 1/2” ID EPDM rubber for hot and cold use
• Polyester yarn reinforcement
• 3/4” female hose ends
• Temp. rating -40°F to +190°F
• Stamped brass ends and crimps
• 200 PSI working pressure
• Bagged with washers
PART NO.
J04204
J04205
J04206
LENGTH
4’
5’
6’
PART NO.
D04012
CTN/MSTR
1/12
1/12
1/12
Mixer Hose
CTN/MSTR
1/12
Fit-All Drain Hose for Washing
Machine
• Individually bagged
• 3 size step down 3/4”, 7/8” and 1” for drain lines
CTN/MSTR
1/12
C
Aluminum Vent Hood
• For clothes dryers or exhaust fans
• Complete with damper and flange plate
PART NO.
D04023
D04024
• High pressure hose; 12” arms
• Individually bagged
Mixer
J04012
SIZE
4”
SIZE
3”
4”
CTN/MSTR
1/12
1/12
Louvered Dryer Vent Hood
• Includes hood, aluminum pipe and collar
4” white hood assembly
D04025
4” brown hood assembly
D04026
CTN/MSTR
1/12
1/12
White Back Collar for Dryer Vent Kits
PART NO.
J04016
SIZE
5’
CTN/MSTR
1/12
White back collar
D04064
Washing Machine Drain Hose
CTN/MSTR
1/6
Complete Dryer Vent Kit
PART NO.
D10900
SIZE
1” x 50’ roll
CTN QTY
1
Washing Machine Pan
• 2 1/2” deep heavy gauge plastic
pan
29” x 31” with side mount drain
J04250
• Kit includes hose (5’ or 8’), vent
and 2 plastic clamps
• Hood is waterproof plastic
• 5 3/4” square back plate
• 12” aluminum extension, prepunched mounting holes
CTN/MSTR
1/5
CTN/MSTR
4” x 5’
1/10
D04005
4” x 8’
1/10
D04008
4” x 8’ flex aluminum duct with louvered hood and
1/6
D04009
two metal clamps
Clamp for Dryer Vent Kit
4” clamp only
D04010
CTN/MSTR
1/10
97
Dryer Vents
Metal Clamp for Dryer Vent
Proflex Aluminum Foil Ducting
• Flexible, fire resistant
• Will not support combustion
• Wire reinforced
• UL listed
• Heavy duty all metal design
• Excellent for use with metal ducting
C
PART NO.
D04015
D04016
D04017
D04018
SIZE
3”
4”
5”
6”
CTN/MSTR
1/12
1/12
1/12
1/12
Aluminum Elbow and Pipe
PART NO.
D04058
D04059
D04060
DESCRIPTION
3” x 90° swivel elbow
3” x 24” aluminum pipe
4” x 90° swivel elbow
4” x 24” aluminum pipe
CTN/MSTR
1/12
1/12
1
Flexible Aluminum Foil Ducting
• Ideal for exhausting clothes dryers and bathroom fans
• Will not support combustion
• No fire or UL ratings
• All aluminum
PART NO.
D04013
D04014
D04027
D04028
SIZE
4” x 5’
4” x 8’
4” x 50’
CTN/MSTR
1/12
1/25
1/12
1/25
PART NO.
D04056
D04057
SIZE
4” x 25’
4” x 8’
CTN/MSTR
1
1/12
Dryer Vent Hose
• Wire-reinforced vinyl
Flexible Duct Connector Kit
• Connects flexible ducting
• Extends exhaust collar of clothes dryer
PART NO.
D04019
SIZE
4”
4” x 20’ (boxed)
D04020
4” x 5’ (bagged)
D04051
CTN/MSTR
1/6
CTN/MSTR
1/5
1/12
Dryer Vent Kit w/Louvered Hood
• Includes vinyl hose, aluminum pipe, collar, clamps and
louvered hood
Increaser/Decreaser
• Connects 3” to 4” ducting or 4” ducting to 3” exhaust collar
PART NO.
D04021
D04022
D04055
DESCRIPTION
3”-4” plastic increaser/decreaser
4”-3” aluminum reducer
3”-4” aluminum increaser
CTN/MSTR
1/6
1/6
1/6
Flexible Aluminum Ducting
SIZE
3” x 8’
4” x 8’
5” x 8
6” x 8’
3” x 25’
4” x 25’
DESCRIPTION
4” x 5’ with white hood
4” x 5’ with brown hood
4” x 8’ with white hood
4” x 8’ with brown hood
CTN/MSTR
1/10
1/10
1/10
1/10
Bathroom Fan Vent Kit
• Ideal for exhausting clothes dryers
• Bendable to any configuration
• No fire or UL ratings
PART NO.
D04031
D04032
D04033
D04034
D04053
D04054
PART NO.
D04001
D04002
D04003
D04004
• Contains the following part for 3” and 4” wall type exhaust
fans: 4” x 5’ flexible vinyl ducting, clamps, 4” louvered vent,
3”-4” foam increaser
CTN/MSTR
1/14
1/9
1/6
1/3
1/10
1/6
PART NO.
D04035
D04050
D04062
DESCRIPTION
Bathroom fan vent kit
4” x 50’ (boxed)-vinyl hose only
3” x 50’ (boxed)-vinyl hose only
CTN/MSTR
1/10
1
1
Indoor Dryer Vent Kit
• Use on electric clothes dryers when outside venting is not
possible
• Recirculates warm, moist air
• Specially designed lint reservoir
Indoor dryer vent kit
D04036
98
CTN/MSTR
1/6
Tape
Domestic Pipe Wrap Tape
PTFE Thread Seal Tape
• Temperature range is 500°F to +650°F
• Withstands pressure up to 5000 PSI
• Meets U.S. government military specification MIL-T27730A
• Thickness 3 mil. plus
Yellow
PART NO.
T16002
T16004
SIZE
2” x 100’
4” x 100’
THICKNESS
12 mil.
12 mil.
CTN QTY
24
12
PART NO.
T19122
T19125
T19342
T19345
SIZE
2” x 100’
4” x 100’
THICKNESS
12 mil.
12 mil.
CTN QTY
24
12
Thread Seal Tape Jar Display
Black
PART NO.
T17002
T17004
SIZE
1/2” x 260”
1/2” x 520”
3/4” x 260”
3/4” x 520”
PART NO.
T17101
T17102
T17104
T18201
T18202
SIZE
1” x 100’
2” x 100’
4” x 100’
1” x 100’
2” x 100’
THICKNESS
10 mil.
10 mil.
10 mil.
20 mil.
20 mil.
1/2” x 260” Teflon Tape
CJ1002
CTN QTY
48
24
12
48
24
Primer for Pipe Wrap Tape
• Maximizes tape performance
• Final step in preparing steel surfaces for taping
• Can more than double adhesion of corrosion tapes to
cleaned steel
• MOTOR FREIGHT ONLY / FLAMMABLE
PART NO.
T16100
SIZE
Quart
CTN QTY
12
Electrical Tape
SIZE
3/4” x 60’
CTN/MSTR
10/250
Slic-tite® High Density Thread
Sealants
• Thickness 4 mils
• Provides a highly resistant
seal on pipe threads for all types of service
• Non-toxic
• Permits easy disassembly, even after years of service
• Meets Mil. Spec T-27730A
• Sealing temperature: -450°F to 550°F (-268°C to 288°C)
• Pressures: to 2,000 PSI (136 BAR)
PART NO.
T19118
T19119
SIZE
1/2” x 600”
3/4” x 600”
CTN QTY
1
PTFE Yellow Gas Line Thread Seal
Tape
• Temperature range is -450°F to +500°F
• Withstands pressure up to 5000 PSI
• Meets U.S. government military specification MIL-T27730A
• 0035 mil
• UL listed
PART NO.
T19222
SIZE
1/2” x 260”
CTN/MSTR
100/500
Duct Tape
• Premium grade, waterproof non-elastic reinforced cloth
• Pressure sensitive; vapor and flame resistant
PART NO.
T20020
T20023
SIZE
2” x 60 yds (gray)
2” x 60 yds (black)
THICKNESS
8.5 mil.
10 mil.
CTN QTY
24
24
Box Sealing Tape
• UL listed
• Individually wrapped
• Blacky vinyl
PART NO.
T20030
C
• Meets U.S. MILSPEC T27730A
• Withstands pressure up to 5000
PSI
• Temperatures to +650°F
• Thickness 3 mil. plus
Imported Pipe Wrap Tape
• UPC listed black tape with PVC backing
CTN/MSTR
100/500
50/350
50/350
50/350
CTN/MSTR
12/36
12/72
PART NO.
T20040
T20041
T20050
DESCRIPTION
2” x 55 yds
2” x 110 yds
Dispenser
CTN/MSTR
36
36
1/24
Self-Fusing Tape
1
100S!
USE
TOMMY TAPE®
20 mil x 1 x 16 self-fusing tape
T20200
• Silicone all purpose repair tape
• Water-tight seal for automotive,
electrical, marine, plumbing and
general-purpose applications
• Carded
CTN/MSTR
1/100
99
Pipe Sleeving/Sand Cloth
Stretch Wrap
Flexible Open Mesh
• Dispenser box
• 100% waterproof
• Polyester on both sides
• 180 grit
• Smaller holes for finer sanding
• Use instead of tape to bind packages or parts
• Protects products from dirt and moisture
• Can be used on palleted shipments or small orders
• Great for wrapping lengths of pipe
EE
C
FRENSER
DISP LUDED
INC
PART NO.
S51120
S51080
SIZE
GAUGE
3” x 700’
120
3” x 1000’
80
ROLLS/CTN
18
18
PART NO.
C25012
C25013
80 gauge wrap 18” x 1500’
S51001
Hand dispenser
S51002
CTN QTY
1
1
CTN/MSTR
1/50
1/50
Waterproof Aluminum Oxide
• Dispenser box
• 100% waterproof
• Wet cut
• 120 grit
Stretch Wrap Film and Dispenser
• Secures packages to pallets
• Reduces lost packages
• Retards moisture
• Lowers handling costs
• Wrapping is priced per carton - no broken cartons
SIZE
1 1/2” x 5 yds
1 1/2” x 10 yds
PART NO.
C25020
C25021
C25022
SIZE
1 1/2” x 5 yds
1 1/2” x 10 yds
1 1/2” x 25 yds
CTN/MSTR
1/50
1/50
1/25
Pipe Sleeving
• Underground sleeving protects against lime reaction in
concrete
• Allows expansion and contraction of pipe, minimizing
stress
• Individually boxed; color-coded (red for hot, blue for cold)
• UPC approved and IAPMO listed
PART NO.
S22001
S22002
S22003
S22004
S22005
S22006
PIPE
SIZE
1/2”-1”
1/2”-1”
1/2”-1”
1/2”-1”
1/2”-1”
1/2”-1”
THICKNESS
COLOR
6 mil
6 mil
10 mil
10 mil
25 mil
25 mil
Red
Blue
Red
Blue
Red
Blue
LENGTH CTN/MSTR
200’
200’
100’
100’
100’
100’
1/20
1/20
1/20
1/20
1/20
1/20
Water Resistant Sand Cloth
• Dispenser box
• Water resistant aluminum oxide
• 120 grit abrasive cloth for cleaning pipe and fittings
PART NO.
C25000
C25001
C25002
C25003
SIZE
1 1/2” x 2 yds
1 1/2” x 5 yds
1 1/2” x 10 yds
1 1/2” x 25 yds
CTN/MSTR
1/50
1/50
1/50
1/25
Open Mesh
• Dispenser box
• 100% waterproof
• Polyester on both sides
• 180 grit with large holes for aggressive sanding
• Can be exposed to water and solvents indefinitely without
breakdown
PART NO.
C25010
C25011
100
SIZE
1 1/2” x 5 yds
1 1/2” x 10 yds
CTN/MSTR
1/50
1/50
Rubber Insulation
SEAMLESS RUBBER
Pipe Insulation
Flexible Closed Cell Insulation
INSTALLATION
DESCRIPTION
Seamless Rubber Pipe Insulation is
an environmentally friendly, CFCfree, flexible elastomeric thermal
insulation.
APPLICATIONS
Seamless Rubber Pipe Insulation is
used to retard heat gain and prevent
condensation or frost formation on
refrigerant lines, cold water plumbing, and chilled water systems. It also
retards heat flow for hot water plumbing, liquid heating, dual temperature
piping, and many solar systems.
Seamless Rubber is recommended
for applications ranging from -70°F
to 220° F (-57° C to 104° C). The
expanded closed cell structure makes
Seamless Rubber an efficient insulator and an effective moisture vapor
retarder.
Due to its unique microwave curing
process, Seamless Rubber has a very
tough skin which withstands tearing,
rough handling, and severe environmental conditions, and yet is quite
flexible for easy installation.
Seamless Rubber has superior
cold weather flexibility.
With a factory-applied coating of talc
on the smooth inner surface, Seamless Rubber slides easily over pipe or
tubing for quick installation. When
applied to existing lines, tubing is slit
lengthwise and snapped into place.
(Slitting can be done on the job with a
sharp knife. All seams and butt joints
should be sealed with Seamless Rubber Contact Adhesive, making sure
both surfaces to be joined are coated
with adhesive.
OUTDOOR APPLICATIONS
Outdoor applications require UV Protective Coating. For best appearance,
two coats are recommended.
UNDERGROUND
For buried lines above the water table,
use a clean fill such as sand (3”-5”
layer) to protect Seamless Rubber
before backfilling. It is recommended
that materials to be buried are properly sealed at all seams and butt joints
with Contact Adhesive. For optimum
performance, the lines should be
encased in a conduit to protect them
from problems associated with ground
water.
RESISTANCE TO
MOISTURE VAPOR FLOW
The closed-cell structure of Seamless
Rubber effectively retards the flow of
moisture vapor, and is considered a
low transmittance vapor retarder. For
most applications, Seamless Rubber
needs no additional protection. Additional vapor barrier protection may be
necessary for Seamless Rubber when
C
installed on low temperature surfaces
or where it is exposed to continuous
high humidity.
FLAME AND SMOKE RATING
Seamless Rubber Pipe Insulation in
wall thicknesses of 1” (25 mm) and
below has a flame spread rating of
25 or less and a smoke development
rating of 50 or less as tested by ASTM
E 84 Method of Testing entitled: “Surface Burning Characteristics of Building Materials.”
Numerical flammability ratings alone
may not define the performance of
products under actual fire conditions.
They are provided only for us in the
selection of products to meet limits
specified, when compared to a known
standard.
SPECIFICATION
COMPLIANCE
ASTM C 534 Type 1 (Tubing)
ASTM D 1056-91-2C1
MEA 186-86-M Vol. IV (New York City)
USDA Requirements
UL 94-5V Flammability Classification
(Recognition No. E55475)
Complies with requirements of
CAN/ULC S102-M88
ASTM E 84 1” 25/50-tested
according to UL 723 and NFPA 255
Meets requirements of NFPA 90A
Sect. 2.3.3 for Supplementary Materials
for Air Distribution Systems
NFPA No. 101 Class A Rating
Meets requirements of UL 181sections
11.0 and 16.0
MIL-P-15280, For T (Tubing)
101
Rubber Insulation
SEAMLESS
RUBBER INSULATION
TEST METHODS
90° F (32° C) Mean Temp
.282 (.041)
.277 (.040)
.270 (.039)
ASTM C 177
ASTM C 177
ASTM C 177
Operating Temperature Range
Upper
200° F (104° C)
Flexible to -100° F (-73° C)
Lower
-70° F (-57° C)
PHYSICAL PROPERTIES
Thermal Conductivity (K)
BTU -in/hr-Ft2 - °F (W/mK)
C
Water Vapor Permeability Dry Cup. Perm-In
.10
ASTM E 96
Water Absorption % weight gain
5%
ASTM D 1056
Ozone Resistant
Pass
ASTM D 1171
Chemical/Solvent Resistance
Good
Mildew Resistance/Air Erosion
Pass
UL 181
THICKNESS RECOMMENDATIONS* - TO CONTROL CONDENSATION
LINE TEMP
PIPE SIZE
LINE TEMP
LINE TEMP
LINE TEMP
50° F
10° C
35° F
2° C
0° F
-18° C
-20° F
-29° C
3/8” ID thru 1 3/8” ID
3/8”
10 mm
1/2”
13 mm
3/4”
19 mm
1”
25 mm
Over 1 3/8” thru 3” IPS
3/8”
10 mm
1/2”
13 mm
1”
25 mm
1”
25 mm
Over 3” IPS thru 4” IPS**
1/2”
13 mm
1/2”
13 mm
1”
25 mm
1 1/4”
32 mm
Over 4” IPS
1/2”
13 mm
3/4”
19 mm
1”
25 mm
1 1/4”
32 mm
3/8” ID thru 2 1/8” ID
3/8”
10 mm
3/8”
10 mm
1/2”
13 mm
1/2”
13 mm
3/8”
10 mm
3/8”
10 mm
1/2”
13 mm
3/4”
19 mm
1/2”
13 mm
1/2”
13 mm
3/4”
19 mm
3/4”
19 mm
Over 4” IPS
1/2”
13 mm
1/2”
13 mm
3/4”
19 mm
3/4”
19 mm
3/8” ID thru 1 1/18” ID
3/4”
19 mm
3/4”
19 mm
1 1/4”
32 mm
1 1/4”
32 mm
Over 1 1/8” ID thru 4” IPS
3/4”
19 mm
1”
25 mm
1 1/2”
38 mm
1 1/2”
38 mm
Over 4” IPS
3/4”
19 mm
1 1/4”
32 mm
1 3/4”
44 mm
2”
50 mm
Normal Conditions (Max 85°F, 29°C - 70% R.H.)
Mild Conditions (Max 80°F, 26°C - 50% R.H.)
Severe Conditions (Max 90°F, 32°C - 80% R.H.)
Seamless Rubber in thickness notes within the specified temperature ranges will prevent condensation on indoor piping under design conditions defined below. Thickness recommendations above 1” can be sleeved to achieve thickness desired.
Normal: Maximum severity of indoor conditions seldom exceed 85° F (29° C) and 70% R.H. in United States.
Mild: Typical conditions are most air-conditioned spaces and arid climates.
Severe: Generally found in areas which excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient.
Under conditions of high humidity, additional thickness of insulation may be required.
**Available: Nom. 1⁄2” or Nom. 3⁄4” thickness only
SEAMLESS RUBBER “R” VALUES PER SQUARE FOOT
Pipe OD or
Nominal Insulation ID
R Value
3/8” (10 mm) Wall
R Value
1/2” (13 mm) Wall
R Value
3/4” (19 mm) Wall
R Value
1” (25 mm) Wall
3/8”
1/2”
5/8”
10 mm
13 mm
16 mm
2.3
2.2
2.1
3.1
2.9
2.7
4.7
4.7
4.6
7.6
7.1
3/4”
7/8”
1 1/8”
19 mm
22 mm
29 mm
2.0
1.9
1.8
2.6
2.7
2.6
4.6
4.6
4.6
6.7
6.5
5.1
1 3/8”
1 1/2” IPS
1 5/8”
35 mm
41 mm
1.8
2.0
2.1
2.7
2.6
2.7
4.4
4.3
4.3
5.8
5.5
5.5
2 1/8”
2” IPS
2 1/2” IPS
54 mm
64 mm
1.9
2.0
1.9
2.6
2.7
2.6
4.0
4.1
3.9
5.2
5.2
5.0
2 5/8”
3 1/8”
3” IPS
67 mm
79 mm
-
2.0
1.9
2.0
2.7
2.5
2.8
4.0
3.8
3.9
5.1
4.9
5.0
3 5/8”
4 1/8”
4” IPS
92 mm
105 mm
-
-
2.6
2.6
2.8
3.7
3.7
3.9
-
5” IPS
6” IPS
8” IPS
-
1.9
-
2.6
2.4
2.4
3.9
3.6
3.6
-
Note: “R” factors were calculated from using the K factor of .277 (75°F, 24°C mean temp) and nominal wall thickness is each case. Lower operating temperatures will result in improved R values.
102
Rubber Insulation
Seamless Rubber Pipe Insulation
Seamless Rubber Pipe Insulation
• Environmentally friendly
• 4 Wall thicknesses: 3/8”, 1/2”, 3/4” and 1”
• Sizes range from 3/8” ID to 4” IPS
• Sizes not listed are special order. Allow two weeks for delivery.
• CFC-free
• Color - Black with blue ink
• Easy installation, flexible
3/8” Wall Thickness
• Sizes not listed are special order. Allow two weeks for delivery.
• CFC-free
PART NO.
I60025
I60038
I60050
I60058
I60075
I60078
I60118
I60138
I60158
I60200
I60218
I60250
I60258
I60300
I60318
I60350
PART NO.
I62038
I62050
I62058
I62075
I62078
I62118
I62138
I62158
I62200
I62218
I62250
I62258
I62300
I62318
I62350
I62358
I62418
I62450
COPPER OD
1/4”
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
2 5/8”
3 1/8”
-
IPS/PVC
1/4”
3/8”
1/2”
1 1/4”
1 1/2”
2”
2 1/2”
3”
FT/BOX
630’
612’
432’
378’
342’
288’
216’
168’
150’
120’
96’
84’
72’
60’
60’
48’
COPPER OD
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
2 5/8”
3 1/8”
3 5/8”
4 1/8”
-
IPS/PVC
1/4”
3/8”
1/2”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
FT/BOX
456’
360’
324’
270’
228’
156’
120’
114’
114’
102’
66’
60’
48’
48’
36’
36’
24’
24’
PART NO.
I61038
I61050
I61058
I61075
I61078
I61118
I61138
I61158
I61200
I61218
I61250
I61258
I61300
I61318
I61350
I61358
I61418
I61450
COPPER OD
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
2 5/8”
3 1/8”
3 5/8”
4 1/8”
-
IPS/PVC
1/4”
3/8”
1/2”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
FT/BOX
294’
228’
180’
144’
126’
90’
78’
72’
66’
60’
48’
42’
36’
36’
30’
30’
24’
24’
COPPER OD
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
2 5/8”
3 1/8”
3 5/8”
IPS/PVC
3/8”
1/2”
1 1/2”
1 1/2”
2”
2 1/2”
3”
-
FT/BOX
108’
108’
90’
66’
60’
54’
42’
42’
36’
36’
36’
30’
30’
30’
C
1” Wall Thickness
PART NO.
I63058
I63075
I63078
I63118
I63138
I63158
I63200
I63218
I63250
I63258
I63300
I63318
I63350
I63358
103
Rubber Insulation
C
Double Stick Rubber Pipe Insulation
Double Stick Rubber Pipe Insulation
• Split with adhesive on both sides
• CFC-free
• Split with adhesive on both sides
• CFC-free
PART NO.
I80038
I80050
I80058
I80034
I80078
I80118
I80138
I80150
I80158
I80200
I80218
I80250
I80258
I80318
COPPER OD/IPS
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 1/2” IPS
1 5/8”
2” IPS
2 1/8”
2 1/2” IPS
2 5/8”
3 1/8”
FT/BOX
570’
402’
348’
318’
288’
216’
150’
120’
132’
78’
78’
60’
72’
60’
COPPER OD/IPS
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 1/2” IPS
1 5/8”
2” IPS
2 1/8”
2 1/2” IPS
2 5/8”
3” IPS
3 1/8”
3 5/8”
4” IPS
4 1/8”
FT/BOX
420’
312’
312’
270’
216’
150’
120’
108’
108’
60’
60’
48’
60’
36’
48’
36’
24’
24’
PART NO.
I81038
I81050
I81058
I81034
I81078
I81118
I81138
I81150
I81158
I81200
I81218
I81250
I81258
I81300
I81318
I81358
I81400
I81418
104
PART NO.
I82038
I82050
I82058
I82034
I82078
I82118
I82138
I82150
I82158
I82200
I82218
I82250
I82258
I82300
I82318
I82358
I82400
I82418
COPPER OD/IPS
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 1/2” IPS
1 5/8”
2” IPS
2 1/8”
2 1/2” IPS
2 5/8”
3” IPS
3 1/8”
3 5/8”
4” IPS
4 1/8”
FT/BOX
258’
192’
180’
120’
126’
90’
78’
66’
72’
48’
60’
36’
42’
30’
36’
30’
24’
24’
COPPER OD/IPS
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 1/2” IPS
1 5/8”
2” IPS
2 1/8”
2 1/2” IPS
2 5/8”
3” IPS
3 1/8”
3 5/8”
4 1/8”
FT/BOX
108’
78’
78’
66’
60’
42’
42’
36’
42’
36’
36’
30’
30’
30’
18’
1” Wall Thickness
PART NO.
I83058
I83034
I83078
I83118
I83138
I83150
I83158
I83200
I83218
I83250
I83258
I83300
I83318
I83358
I83418
Poly Insulation
CLOSED CELL
Pipe Insulation
C
INSTALLATION
DESCRIPTION
Closed Cell Pipe Insulation is a
flexible and easy-to-apply tubing
product available in Semi-Slit and
Self-Sealing styles. These chemically
inert pipe insulations are specially
formulated to retard heat gain and
their closed-cell structures allow them
to function as efficient insulators. The
Self-Sealing version has yellow selfseal release liner that is both easy to
see and peel.
APPLICATIONS
Closed Cell Pipe Insulation is installed
by sliding the stick over pipe or tubing. For existing lines, the insulation
should be slit lengthwise and fitted
over the pipe. When in place, make
sure all seams are adhered with contact adhesive and pressed together to
form a seal. The Self-Sealing version
does not require adhesive. Fittings
can be fabricated from miter-cut
tubular sections. Closed Cell Pipe
Insulation is easily cut with a sharp
knife.
OUTDOOR APPLICATIONS
Outdoor applications require a protective coating (high quality exterior
acrylic latex paint) for optimum
performance. For best appearance,
two coats are recommended.
UNDERGROUND
For buried lines above the water
table, use a clean fill such as sand
To reduce unwanted heat loss or heat
(3”-5” layer) to protect Closed Cell
gain, control condensation, decrease
Pipe Insulation before backfilling. It is
plumbing noise and maximize
recommended that all materials to
energy savings. They can be used on
be buried are properly sealed at all
hot and cold water lines, refrigeraseams and butt joints with Contact
tion lines, air conditioning lines; line
Adhesive. For optimum performance,
set tubing, condenser coils, and conthe lines should be encased in connection and distribution lines.
duit to protect them from problems
associated with ground water.
Closed Cell Pipe Insulation has low
thermal conductivity and a very low
RESISTANCE TO MOISTURE
water vapor transmission rate. This
low density product demonstrates ex- VAPOR FLOW
cellent thermal, physical and chemiThe closed-cell structure effectively
cal resistant properties, and has a
retards the flow of moisture vapor,
broad service temperature range
and is considered a low transmitbetween -90° F and 180° F (-68° C
tance vapor retarder. For most apand 82° C). It can be installed in
plications, Closed Cell Pipe Insulation
commercial, industrial, and residen- needs no additional protection.
tial insulation projects.
Additional vapor barrier protection
may be necessary for Closed Cell
Pipe Insulation when installed on low
temperature surfaces or where it is
exposed to continuous high humidity.
FLAME AND SMOKE RATING
Closed Cell Pipe Insulation in wall
thicknesses of 1” (25mm) and below
has a flame spread rating of 25 or
less and a smoke development rating
of 50 or less as tested by ASTM E
84; CAN/ULC-S102.2-M88 Method
of Testing entitled: “Surface Burning
Characteristics of Building Materials.”
Numerical flammability ratings alone
may not define the performance of
products under actual fire conditions. They are provided only for use
in the selection of products to meet
limits specified, when compared to a
known standard.
SPECIFICATION COMPLIANCE
Complies with requirements of:
ASTM E 84; CAN/ULC S102.2
ASTM D 1622
ASTM D 1171
ASTM C 177 or C518
ASTM E 96
105
Poly Insulation
PHYSICAL DATA
PROPERTIES
TEST METHODS
Closed Cell Polyolefin
–
Charcoal
–
Upper Use Limit
180°F (82°C) constant
–
Lower Use Limit
-90°F (-68°C)
–
1.5 lbs/ft3
ASTM D 1622
Material
Color
Density
Ozone Resistant
C
Thermal Conductivity (K)
BTU-in/hr-ft2 - F° (W/m-K)
Good
ASTM D 1171
at 75° F (24°C) Mean Temp
ASTM C 177 or C 518
0.230 (0.033)
–
0.02% by Volume
ASTM E 96
Flame Speed
Less than 25
ASTM E 84; CAN/ULC-S102.2-M88
Smoke Classification
Less than 50
ASTM E 84; CAN/ULC-S102.2-M88
Water Absorption
THICKNESS RECOMMENDATIONS* - TO CONTROL CONDENSATION
LINE TEMP
PIPE SIZE
LINE TEMP
LINE TEMP
LINE TEMP
50° F
10° C
35° F
2° C
0° F
-18° C
-20° F
-29° C
3/8” ID thru 1 3/8” ID
3/8”
10 mm
1/2”
13 mm
3/4”
19 mm
1”
25 mm
3/8”
10 mm
1/2”
13 mm
1”
25 mm
1”
25 mm
3/8”
10 mm
1/2”
13 mm
1”
25 mm
1”
25 mm
Over 4” IPS
1/2”
13 mm
3/4”
19 mm
1”
25 mm
1 1/4”
32 mm
3/8” ID thru 2 1/8” ID
3/8”
10 mm
3/8”
10 mm
3/8”
10 mm
1/2”
13 mm
3/8”
10 mm
3/8”
10 mm
3/8”
10 mm
1/2”
13 mm
3/8”
10 mm
3/8”
10 mm
1/2”
13 mm
3/4”
19 mm
Over 4” IPS
3/8”
10 mm
1/2”
13 mm
1/2”
13 mm
3/4”
19 mm
3/8” ID thru 1 1/18” ID
3/4”
19 mm
3/4”
19 mm
1 1/4”
32 mm
1 1/4”
32 mm
Over 1 1/8” ID thru 4” IPS
3/4”
19 mm
1”
25 mm
1 1/2”
38 mm
1 1/2”
38 mm
Over 4” IPS
3/4”
19 mm
1”
25 mm
1 1/2”
38 mm
2”
50 mm
Normal Conditions (Max 85°F, 29°C - 70% R.H.)
Mild Conditions (Max 80°F, 26°C - 50% R.H.)
Severe Conditions (Max 90°F, 32°C - 80% R.H.)
Closed Cell Pipe Insulation in thickness notes within the specified temperature ranges will prevent condensation on indoor piping under design conditions defined below. Thickness
recommendations above 1” can be sleeved to achieve thickness desired.
Normal: Maximum severity of indoor conditions seldom exceed 85° F (29° C) and 70% R.H. in United States.
Mild: Typical conditions are most air-conditioned spaces and arid climates.
Severe: Generally found in areas which excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient.
Under conditions of high humidity, additional thickness of insulation may be required.
**Available: Nom. 1⁄2” or Nom. 3⁄4” thickness only
CLOSED CELL “R” VALUES PER SQUARE FOOT
Pipe OD or
Nominal Insulation ID
R Value
3/8” (10 mm) Wall
R Value
1/2” (13 mm) Wall
R Value
3/4” (19 mm) Wall
R Value
1” (25 mm) Wall
3/8”
1/2”
5/8”
10 mm
13 mm
16 mm
2.687
2.490
2.357
3.844
3.582
3.375
6.027
5.653
8.189
3/4”
7/8”
1 1/8”
19 mm
22 mm
29 mm
2.680
2.187
2.082
3.223
3.107
4.835
5.374
5.155
4.835
7.767
7.435
6.941
1 3/8”
1 5/8”
1 7/8”
35 mm
41 mm
-
2.011
1.959
1.920
2.822
2.737
2.672
4.610
4.420
4.313
6.588
6.323
6.115
2 1/8”
2 3/8”
2 5/8”
54 mm
67 mm
1.889
1.864
1.844
2.620
2.578
2.544
4.209
4.124
4.053
5.948
5.810
5.695
2 7/8”
3 1/8”
3 1/2”
79 mm
-
1.827
1.812
-
2.514
2.490
2.459
3.993
3.942
3.877
5.596
5.512
5.404
3 5/8”
4”
4 1/8”
4 1/2”
92 mm
105 mm
-
-
2.449
2.425
2.418
2.399
-
5.373
5.264
5.196
Note: “R” factors were calculated from using the K factor of .230 (75°F, 24°C mean temp) and nominal wall thickness is each case. Lower operating temperatures will result in improved R values.
106
Poly Insulation
Semi-Slit Pipe Insulation
Self-Sealing Pipe Insulation
• 100% closed cell polyethylene
• UPS shippable cartons - CARTON QUANTITIES ONLY
• For outdoor use, paint with a high quality exterior acrylic latex paint
• Complete seal on hot or cold pipe
• Two strips of self-adhesive seal easily at any length
SPECIFICATIONS:
SPECIFICATIONS:
Density: 1.5 lbs./cubic foot; Mold growth: None;
Temperature Range: -90° to 180°F; Flame/Smoke:
25/50; Water vapor permeability: less than .02
inches; Ozone resistance: Good
PART NO.
I50058
I50075
I50078
I50118
I50138
I50158
I50178
I50218
I50238
I50258
NOMINAL ID
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 3/8”
2 5/8”
R VALUES
2.357
2.680
2.187
2.082
2.011
1.959
1.920
1.889
1.864
1.844
CTS
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
IPS
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
-
FT/BOX
408’
360’
300’
240’
192’
132’
108’
90’
90’
72’
R VALUES
3.375
3.107
4.835
2.822
2.737
2.672
2.620
2.578
2.544
CTS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
IPS
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
-
FT/BOX
306’
240’
180’
150’
120’
90’
84’
66’
60’
R VALUES
6.027
5.653
5.374
5.155
4.835
4.610
4.420
4.313
4.209
4.053
CTS
3/8”
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
IPS
1/4”
3/8”
1/2”
1”
1 1/4”
1 1/2”
-
FT/BOX
204’
180’
168’
156’
102’
90’
84’
66’
54’
48’
R VALUES
8.189
7.767
7.435
6.941
6.588
6.323
6.115
5.948
5.695
CTS
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
IPS
3/8”
1/2”
1”
1 1/4”
1 1/2”
-
FT/BOX
108’
102’
90’
90’
72’
60’
54’
48’
42’
PART NO.
I51058
I51078
I51118
I51138
I51158
I51178
I51218
I51238
I51258
NOMINAL ID
5/8”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 3/8”
2 5/8”
PART NO.
I54050
I54058
I54075
I54078
I54118
I54138
I54158
I54178
I54218
I54258
NOMINAL ID
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 5/8”
1” Wall Thickness
PART NO.
I55058
I55075
I55078
I55118
I55138
I55158
I55178
I55218
I55258
NOMINAL ID
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 5/8”
PART NO.
I52058
I52034
I52078
I52118
I52138
I52158
I52178
I52218
I52238
I52258
I52318
I52358
NOMINAL ID
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 3/8”
2 5/8”
3 1/8”
3 5/8”
R VALUES
2.357
2.680
2.187
2.082
2.011
1.959
1.920
1.889
1.864
1.844
1.812
-
CTS
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
IPS
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
-
FT/BOX
408’
360’
300’
240’
192’
132’
108’
90’
90’
72’
54’
42’
R VALUES
3.844
3.582
3.375
3.223
3.107
4.835
2.822
2.737
2.672
2.620
2.578
2.544
2.490
2.459
2.449
2.418
2.399
CTS
IPS
FT/BOX
1/2”
3/4”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
-
3/8”
1/2”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
3”
4”
306’
270’
240’
180’
150’
120’
90’
84’
66’
60’
48’
42’
42’
30’
30’
R VALUES
5.653
5.374
5.155
4.835
4.610
4.420
4.209
CTS
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
2”
IPS
3/8”
1/2”
1/2”
3/4”
1”
1 1/4”
-
FT/BOX
180’
168’
156’
102’
90’
84’
54’
R VALUES
8.189
7.435
7.767
6.941
6.588
6.323
6.115
5.948
5.810
5.695
CTS
1/2”
3/4”
5/8”
1”
1 1/4”
1 1/2”
2”
2 1/2”
IPS
3/8”
1/2”
1”
1 1/4”
1 1/2”
2”
-
FT/BOX
108’
90’
102’
90’
72’
60’
54’
56’
42’
36’
C
PART NO.
I53038
I53050
I53058
I53075
I53078
I53118
I53138
I53158
I53178
I53218
I53238
I53258
I53318
I53312
I53358
I53418
I53412
NOMINAL ID
3/8”
1/2”
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 3/8”
2 5/8”
3 1/8”
3 1/2”
3 5/8”
4 1/8”
4 1/2”
PART NO.
I56058
I56075
I56078
I56118
I56138
I56158
I56218
NOMINAL ID
5/8”
3/4”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
1” Wall Thickness
PART NO.
I57058
I57078
I57115
I57118
I57138
I57158
I57178
I57218
I57238
I57258
NOMINAL ID
5/8”
7/8”
3/4”
1 1/8”
1 3/8”
1 5/8”
2”
2 1/8”
2 3/8”
2 5/8”
107
Insulation Tools/Dielectric Union
Poly Pipe Insulation Tees & Elbows
Thermal Expansion Tanks
• Designed for the protection of potable hot water systems
• Install between the backflow preventer an the water heater
• Specifications:
Factory pre-charge: 40psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
• Complete seal on hot or cold pipe
• Two strips of self-adhesive to seal easily
SPECIFICATIONS:
C
PART NO.
I59050
I59075
I59100
I59125
I59150
I59175
I59200
I59225
DESCRIPTION
1/2” Tee
3/4” Tee
1” Tee
1-1/4” Tee
1/2” Elbow
3/4” Elbow
1” Elbow
1-1/4” Elbow
WALL THICKNESS
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
CTN/MSTR
1/16
1/12
1/12
1/8
1/32
1/20
1/16
1/12
PART NO.
R15202
R15204
DESCRIPTION
2 gallon tank
4-1/2 gallon tank
PART NO.
IA1050
IA1100
IA2050
IA2100
DESCRIPTION
Fast Tack 1/2 pint
Fast Tack 1 pint
Slow Tack 1/2 pint
Slow Tack 1 pint
CTN QTY
48
24
48
24
• Designed for the protection of potable hot water systems
• Install between the backflow preventer and the water heater
• Specifications:
Factory pre-charge: 15psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
PART NO.
R15206
DESCRIPTION
2 gallon tank
Female x Sweat
SIZE
1 gallon
CTN QTY
4
Insulation Tape
CTN. QTY.
1
PALLET QTY.
150
Dielectric Union - Lead Free
Insulation Protective Coating
PART NO.
IPC004
PALLET QTY.
150
80
Dual Port Self Cleaning Thermal
Expansion Tank
Insulation Contact Adhesive
• Brush top cans
• For use with rubber insulation only
• MOTOR FREIGHT ONLY/FLAMMABLE
CTN. QTY.
1
1
Male x Sweat
• Prevents electrolysis or galvanic action
when connecting dissimilar metals
• Residential or commercial use
• Zinc plated forged steel
• Solder ends conform to ANSI B16.19
• EPDM washer, ABS fiber sleeve
• Threads conform to ASNI B2.1
• Pressure rated at 250 PSI at 180°F
Female x Sweat
PART NO.
D06050
D06075
D06100
D06125
D06150
D06200
FIP x COPPER SWEAT
1/2” x 1/2”
3/4” x 3/4”
1” x 1”
1-1/4” x 1-1/4”
1-1/2” x 1-1/2”
2” x 2”
OD
5/8”
7/8”
1-1/8”
1-3/8”
1-5/8”
2-1/8”
CTN/MSTR
24/144
12/144
12/120
6/48
6/48
6/24
FIP x COPPER SWEAT
3/4” x 1/2”
OD
5/8”
CTN/MSTR
24/144
MIP x COPPER SWEAT
1/2” x 1/2”
3/4” x 3/4”
OD
7/8”
7/8”
CTN/MSTR
12/144
24/96
MIP x COPPER SWEAT
3/4” x 1/2”
OD
5/8”
CTN/MSTR
24/144
Reducing
1/8” x 2” x 30’ cork tape
INT001
1/8” x 2” x 30’ tape
INT002
CTN QTY
12
12
Flanged Dielectric Union
108
FIP x COPPER SWEAT
2-1/2” x 2-1/2”
3” x 3”
4” x 4”
Male x Sweat
PART NO.
D06005
D06750
Reducing
• Temperature range: 180°F at 200 PSI
• Maximum temperature 200°F
PART NO.
D06250
D06300
D06400
PART NO.
D06350
PART NO.
D06755
CTN/MSTR
1/5
1/5
1/5
Water Heater Connectors
PlumBite Push On Water Heater Connector
Universal Copper Thermocouple
• All copper with brass fittings
• Adaptable to 5 different pilot valves
• Kit includes 2 clips and nuts
• Individually carded
PART NO.
J36118
J36124
J36130
J36136
J36148
LENGTH
18”
24”
30”
36”
48”
CTN/MSTR
10/100
10/100
1/10
1/10
1/10
Gasket and Insert for Dielectric Union
• For water
• 200°F temperature rating
Insert
PART NO.
C76605
C76606
C76607
C76608
C76612
C76613
C76614
C76615
C76616
C76617
SIZE
1/2” Push Fitting x 3/4” FIP x 12”
1/2” Push Valve x 3/4” FIP x 18”
3/4” Push Valve x 3/4” FIP x 18”
DESCRIPTION
1/2” insert
3/4” insert
1” insert
1-1/4” insert
1-1/2” insert
2” insert
CTN QTY
25
25
25
25
25
25
DESCRIPTION
1/2” gasket
3/4” gasket (EPDM rubber)
1” gasket
1 1/4” gasket
1 1/2” gasket
2” gasket
CTN QTY
25
25
25
25
25
25
Corrugated Water Heater Connector
• Corrugated for easy flex on water heaters and softeners
• Includes rubber washers
Copper
PART NO.
J34712
J34715
J34718
J34724
Gasket
PART NO.
D06850
D06875
D06900
D06901
D06902
D06903
Dielectric Nipple
• 180° maximum temperature
• Prevents corrosion, lime and scale buildup
• Adds years of life to any water system
• For use on water heaters, dishwashers, water filtration systems
• Electroplated steel casing with non-corrosion thermoplastic
lining
PART NO.
D06753
D06450
D06500
D06510
D06525
D06550
D06600
D06650
D06700
C
CTN/MSTR
1/80
1/80
1/80
1/80
1/80
1/80
1/80
1/80
1/80
1/80
Gasket
Insert
PART NO.
D06800
D06801
D06802
D06803
D06804
D06805
• Leak-Free, Tool-Free & Solvent Free
• Approved for behind-the-wall
installation
• Fittings may be reused if necessary
• Internal PEX Tube insert provided for
Perfect PEX connections
• For use with hot and cold potable water
• Operating temperature 0°F to 200°F, 200 PSI
SIZE
3/4” MIP x 3” length
1/2” MIP x 3” length
1” MIP x 3” length
1 -1/4” MIP x 4” length
1-1/2” MIP x 4” length
2-1/2” MIP x 6” length
CTN/MSTR
1/200
1/350
1/100
1/100
1/30
1/30
1/30
1/20
1/12
FPT x LENGTH
3/4” x 12”
3/4” x 15”
3/4” x 18”
3/4” x 24”
CTN/MSTR
1/50
1/50
1/50
1/50
PART NO.
J35712
J35715
J35718
J35724
FIP x SWT x LENGTH CTN/MSTR
3/4” x 3/4” x 12”
25/50
3/4” x 3/4” x 15”
25/50
3/4” x 3/4” x 18”
25/50
3/4” x 3/4” x 24”
25/50
PART NO.
J36712
J36715
J36718
J36724
FIP x MIP x LENGTH CTN/MSTR
3/4” x 3/4” x 12”
1/25
3/4” x 3/4” x 15”
1/25
3/4” x 3/4” x 18”
1/25
3/4” x 3/4” x 24”
1/25
PART NO.
J38712
J38715
J38718
J38724
MIP x FIP x LENGTH CTN/MSTR
3/4” x 3/4” x 12”
25/50
3/4” x 3/4” x 15”
25/50
3/4” x 3/4” x 18”
25/50
3/4” x 3/4” x 24”
25/50
PART NO.
J39712
J39715
J39718
J39724
FIP x FIP x LENGTH
3/4” x 3/4” x 12”
3/4” x 3/4” x 15”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
Stainless Steel
CTN/MSTR
25/50
25/50
25/50
25/50
109
Water Heater Supplies
Braided Stainless Steel Water
Heater Connector
Water Heater Safety Pan
• Supplied with 1” hookup adapter for any drain type
(J34-800)
• 2 1/2” depth
• High impact plastic
• Southern Building Code and natural gas approved
• UPC listed
• LEAD FREE
PART NO.
S04350
S04351
S04352
C
FIP x LENGTH
3/4” x 12”
3/4” x 18”
3/4” x 24”
CTN/MSTR
10/40
10/40
10/40
PART NO.
S04353
S04354
S04355
FIP x COMP x LENGTH CTN/MSTR
3/4” x 3/4” x 12”
10/40
3/4” x 3/4” x 18”
10/40
3/4” x 3/4” x 24”
10/40
PART NO.
S04356
S04357
S04358
FIP x MIP x LENGTH CTN/MSTR
3/4” x 3/4” x 12”
10/40
3/4” x 3/4” x 18”
10/40
3/4” x 3/4” x 24”
10/40
PART NO.
S04359
S04360
S04361
MIP x COMP xLENGTH CTN/MSTR
3/4” x 3/4” x 12”
10/40
3/4” x 3/4” x 18”
10/50
3/4” x 3/4” x 24”
10/50
Water Heater Stand
• Galvanized
• Snap-in legs
• Easy to assemble
• Rating approval at 2,000 lbs. static weight
18” square x 17” high water heater stand
J36200
PART NO.
J36018
J36022
J36024
J36026
J36030
CTN/MSTR
1/4
• 24 gauge
• Flared sides
• 1” fitting (J34-800)
PART NO.
J37022
J37024
J37026
J37028
J37030
DESCRIPTION
22” x 22” x 4”
24” x 24” x 4”
26” x 26” x 4”
28” x 28” x 4”
30” x 30” x 4”
CORNERS
FOLDED FOR
STRENGTH
Seamless Galvanized Corner
CTN QTY
1
1
1
1
1
• Seamless galvanized water
heater pans are holded not
welded
• 1” drain connector included
(J34-800)
• One piece stamped aluminum
.032 mil (20 gauge)
• Aluminum pans comply with
SBCCI, sec. 1213.7
Round Aluminum
CTN QTY
1
1
Stand-rite Water Heater Stand
• Lab tested
• Meets UPC requirements
• Heavy duty
• Corrosion resistant
• 14 gauge galvanized steel
• Top 21.5” x 21.5”
• Rated up to 650 pounds
• For water heaters up to 65 gallons
• Includes mounting clips for securing to wall/floor
• Quick assembly
CTN QTY
1
PART NO.
J38020
J38022
J38024
J38026
J38030
DESCRIPTION
20” round water heater pan
CTN/MSTR
1/10
1/10
1/10
1/10
1/5
Seamless Galvanized
PART NO.
J39019
J39023
J39027
J39030
DESCRIPTION
19” seamless water heater pan
CTN QTY
1
1
1
1
Water Heater Pan Adapter
• 1” PVC
• Washer and locknut
• Fits all Jones Stephens pans
1” Adapter
J34800
110
CTN/MSTR
1/20
1/20
1/20
1/10
1/5
Water Heater Pan
• No assembly required
• 3/4 tubular steel construction
• Non-rust paint
• 800 lbs. static weight
Water heater stand
J36400
TOP ID
20 1/2”
22 1/2”
25 1/2”
27 1/2”
31 1/2”
Galvanized Hot Water Heater Pans
Water Heater Stand
25 1/2” x 17” high water heater stand
J36300
28” x 17” high water heater stand
J36250
BOTTOM ID
19”
22”
24”
26”
30”
CTN/MSTR
1/25
Pressure Gauges
Run-Off Tube
Pressure Gauge
• 1/4” MIP brass lower connection
• Applicable with air, water, oil and gas - anything which
does not attack brass
• Not for use on oxygen service
• Individually boxed
• Steel case
• Shatterproof face
• Class 2.5-2% accuracy
• UL listed
• For water heaters
• Electroplated fittings
• 230°F temperature rating
• Hand tighten to T and P valve
PART NO.
J34975
J34980
J34970
DESCRIPTION
3/4” NPT x 60” side mount
3/4” NPT top mount
3/4” NPT x 60” side mount
CTN/MSTR
1/100
1/25
1/15
Gas Testing Equipment
• Large 4” face
• Class 1A gauge
• 5 lb. gas test gauge/15 lb. gas test gauge
• 1/10 # increments
• Inches of mercury scale
• External set hand
• Bellows design
• 1/4 NPT connection
• Gauge meets all requirements of the City of Houston code
Word 94-108, Section 1204.3.2, revised January 18, 2001
• ALL SALES FINAL; NO WARRANTY; NO RETURN
PART NO.
G60055
G65055
G60005
G64055
DESCRIPTION
15 lb. gas test gauge only
15 lb. gauge, body and valve-complete
5 lb. gas test gauge only
5 lb. gauge, body and valve-complete
CTN/MSTR
1/20
1/20
1/20
1/20
2 1/2” Face Liquid Filled Pressure
Gauge
• +/- 1.5% accuracy
• Glycerin filled for use where vibration or pressure pulsation
occur
• -50 to 150°F operating temperature
• 1/4” NPT bottom connection
• Polished 304 stainless steel case with vent plug
PART NO.
J40553
J40554
J40555
J40556
J40557
DESCRIPTION
0-30 PSI
0-60 PSI
0-100 PSI
0-200 PSI
0-300 PSI
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
2” Face
PART NO.
G60015
G60030
G60060
G60100
G60160
G60200
G60300
PRESSURE RATING
15 PSI
30 PSI
60 PSI
100 PSI
160 PSI
200 PSI
300 PSI
CTN/MSTR
1/100
1/100
1/100
1/100
1/100
1/100
1/100
PRESSURE RATING
15 PSI
30 PSI
60 PSI
100 PSI
160 PSI
200 PSI
300 PSI
CTN/MSTR
1/100
1/60
1/100
1/100
1/100
1/100
1/100
PRESSURE RATING
30 PSI
60 PSI
100 PSI
200 PSI
300 PSI
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
C
2 1/2” Face
PART NO.
G61015
G61030
G61060
G61100
G61160
G61200
G61300
3 1/2” Face
PART NO.
G62030
G62060
G62100
G62200
G62300
Pigtail Syphon
• For use with gauges on steam line
• 1/4” MPT x 1/4” MPT
• Steel construction
G60000
G60001
Straight
G60000
90° Angle
G60001
CTN/MSTR
20/200
10/200
Water Test Gauge
• 3/4” brass hose connection
• Steel case with 2 1/2” shatterproof face
300 PSI
J66300
300 PSI with indicator
J66301
CTN/MSTR
1/50
1/50
111
Pressure Gauges
Sillcock/Water or Gas Test Gauge
Assembly
• Brass air valve
• Adapts to 3/4” male garden hose or 3/4” MIP
• Comes with garden hose adapter
• Steel case with 2” shatterproof face
C
200 PSI
G64101
CTN/MSTR
1/50
5 Pound Gas Test Gauge
• 1/4” NPT
• 2 1/2” diaphragm
• 1/10 # increments
• For building code inspection
5 lb. gas test gauge
G61005
CTN/MSTR
1/100
Gas Test Gauge
CTN/MSTR
1/50
1/50
Test Gauge Assembly
PART NO.
G64030
G64060
G64100
G64160
G64200
G64333
G64000
G64001
G64002
G64020
DESCRIPTION
30 PSI
60 PSI
100 PSI
160 PSI
200 PSI
300 PSI
1/4” air valve and cap
Gas test body only
1/8” air valve and cap
Gas test body and air valve assembly
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
1/50
50/300
1/100
500/1000
1/100
Tridicator
PART NO.
J40550
J40551
J40558
J40560
DESCRIPTION
2 1/2” face angle 2 1/4” stem (1/4” NPT)
2 1/2” face angle 1” stem (1/4” NPT)
CTN/MSTR
1/50
1/50
1/50
1/50
Vacuum Gauge
Bell Type
• 1/4” brass lower connection
• -30 to 0 inch Hg
• Black steel case with bronze internals
PART NO.
G66015
G66030
G66060
G66100
G67015
G67030
G67060
G67100
G66000
G66002
G67000
G67002
DESCRIPTION
13# x 3/4” FIP
30# x 3/4” FIP
60# x 3/4” FIP
100# x 3/4” FIP
15# x 1” FIP
30# x 1” FIP
60# x 1” FIP
100# x 1” FIP
3/4” Bell body (less air valve)
3/4” Bell body (with air valve)
1” Bell body (less air valve)
1” Bell body (with air valve)
Gas Test Assembly
CTN/MSTR
1/50
1/50
1/50
1/24
1/50
1/50
1/50
1/100
1/100
1/100
1/59
1/80
• 4” face and pressure snubber
• Regulates air to an even flow
• Over pressurization will void the warranty
• Protects the diaphragm from compressed air damage
• Class 1A gauge
5 lb. Test Assembly
G64155
15 lb. Test Assembly
G65155
112
• Adapts to 3/4” MPT
• Steel case with 2” shatterproof face
• Plated body with 3/4” FIP inlet
• Brass air valve
• 0-55 PSI
• 70°F to 250°F temperature range
• 2” steel case gauge on 15 lb.
• 5 lb. is marked in 1/10 lb. increments
• 15 lbs. is marked in 1/10 lb. increments
• Plated body with 3/4” FIP inlet
• 2 1/2” diaphragm on 5 lb.
• Adapts to 3/4” MPT
• Brass air valve
15 lb. gas test gauge assembly
G64015
5 lb. gas test gauge assembly
G64005
Gas Test Gauge Assembly
CTN QTY
1
1
Vacuum gauge (2” face)
G63001
CTN/MSTR
1/100
Pressure Snubber
• Use on lines with noticeable pressure changes/oscillations
• Bronze body and core
• 1000 PSI maximum
1/4” NPT for air or gas
G64300
1/4” NPT for oil, steam or water
G64301
CTN/MSTR
1/700
1/200
Needle Valve for Pressure Gauge
• 1/4” NPT
• Brass body, seat, stem and handle
• 300°F maximum temperature
• Female x female
• Teflon packing
• 2000 PSI
1/4” needle valve
G64004
CTN/MSTR
1/125
Tubing
Hot Water/Refrigerant Line
Thermometer
Brass Wells
• Solid brass construction
• 1 1/2” stem
• 1/2” MPT x 1/4” FPT threads
B
Brass wells for J40-562
J40563
A
Pocket Test Thermometer
• Straight or angle pattern
• Steel or brass well
• 40°-280°F x 5°F (5-120°C x 2°C)
• 1/2” NPT; 1” stem
PART NO.
J40500
J40501
J40502
J40503
CTN/MSTR
1/200
DESCRIPTION
Straight pattern steel well
Straight pattern brass well
Angle pattern steel well
Angle pattern brass well
DIM (A)
1”
1”
1”
1”
DIM (B) CTN/MSTR
1/2” NPT
1/50
1/2” NPT
1/50
1/2” NPT
1/50
1/2” NPT
1/50
Dial Thermometer
C
• 2% accuracy for hot and cold
• Pocket clip on sheath; 5” stem
Cold thermometer (-40° to 160°F)
J40700
Hot thermometer (0° to 220°F)
J40701
CTN/MSTR
1/80
1/80
Natural Polyethylene Tubing
• Non-toxic, 100% virgin material
• 100’ coils in dispenser box
• FDA
• -40°F to +135°F
SWT Connection
• 2 1/2” face
• 5° increments
• Dual scale: 40°-240°/0°-120°C
• Brass wells/removable thermometers
• Thermometers are supplied with wells
PART NO.
J40702
J40703
J40704
J40705
MIP Connection
DESCRIPTION
3/4” SWT connection
1/2” MIP connection
3/4” SWT well
1/2” MIP well
CTN/MSTR
1/50
1/100
1/100
1/100
• No well provided; order wells separately
• 9” scale, red-reading mercury tubes
• Molded cycolac case with glass window
• Adjustable to any angle
• Accurate to +/- one scale division
• Must have well
A
PART NO.
J40505
J40506
J40510
J40511
DESCRIPTION
Hot water 30°-240°F
Cold water 0°-120°F
Standard brass well
Extended well
DIM (A)
DIM (B) CTN/MSTR
3 1/2” stem 1” NPSM
1/50
3 1/2” stem 1” NPSM
1/25
2 1/2” stem 3/4” NPT
1/100
1 3/4” stem 3/4” NPT
1/100
Bi-Metal Dial Thermometer
A
B
• For commercial or home heating systems
• 1/2” NPT
• 20°-240°F temperature range
• 3” dial in steel case
• Angle has back connection; straight has bottom
connection
DIM (A)
Angle outlet with brass
1 1/8” stem
J40561
well
Straight outlet with brass
2 3/8” stem
J40562
well
OD
ID
PSI
WALL
T25250
T25312
T25375
T25500
T25625
1/4”
5/16”
3/8”
1/2”
5/8”
.170”
.187”
.250”
.375”
.500”
120
150
125
95
75
.040
.040
.062
.062
.500
CTN
QTY
100’
100’
100’
100’
100’
Clear Vinyl Tubing
Weksler Industrial Multi-Angle
Thermometer
B
PART NO.
DIM (B)
CTN/MSTR
1/2” NPT
1/50
1/2” NPT
1/50
• 75 duro clear
• -5°F to +125°F
• Self-dispensing cartons
• FDA
PART NO.
T26124
T26125
T26186
T26187
T26250
T26252
T26312
T26313
T26375
T26376
T26377
T26498
T26500
T26626
T26625
T26750
T26875
T26000
OD
ID
WALL
WPPSI
3/16”
1/4”
1/4”
5/16”
3/8”
1/2”
7/16”
1/2”
1/2”
9/16”
5/8”
5/8”
3/4”
3/4”
7/8”
1”
1 1/8”
1 1/4”
1/8”
1/8”
3/16”
3/16”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
7/8”
1”
1/32”
1/16”
1/32”
1/16”
1/16”
1/8”
1/16”
3/32”
1/16”
3/32”
1/8”
1/16”
1/8”
1/16”
1/8”
1/8”
1/8”
1/8”
50
80
40
60
55
90
50
60
45
55
65
30
45
30
40
35
30
28
CTN
QTY
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
100’
50’
50’
113
Stud Guards
Soft Aluminum Tubing
Stud Guard
• 50’ coils
• Alloy 3003-0, ASTM B-483
PART NO.
S33318
C
PART NO.
T27125
T27188
T27250
T27313
T27375
T27438
T27500
T27625
OD
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
WALL
.025
.028
.032
.035
.035
.035
.035
.035
CTN/MSTR
1/10
1/10
1/10
1/10
1/10
1/10
1/10
1/10
SIZE
3 1/2” x 18”
GAUGE
16
CTN QTY
25
Stud Guard
• 20 Holes
PART NO.
S33518
SIZE
5” x 18”
GAUGE
16
CTN QTY
25
Stud Guard
Stud Protectors and Plate
• Protects piping and wiring from nails
PART NO.
S33001
S33002
S33003
S33005
S33006
S33010
S33011
S33012
S33014
SIZE
1 1/2” x 6”
1 1/2” x 3”
5” x 8” (not self nailed)
1 1/2” x 6”
1 1/2” x 5”
1 1/2” x 6”
1 1/2” x 3”
3 1/2” x 6” (not self nailed)
3 1/2” x 6” (self nailed)
GAUGE
18
18
16
16
18
22
22
16
16
S180032
CTN QTY
100
100
50
100
100
100
100
25
25
Interlocking Stud Guard
PART NO.
S33004
S33007
S33016
SIZE
1 1/2” x 6”
1 1/2” x 6”
3 1/2” x 6”
GAUGE
20
16
16
CTN QTY
100
100
25
• 18 gauge galvanized
• Four nail holes on each side
• Pipe opening accommodates 2” IPS or smaller pipe
• Stud/joist reinforcement when drilling or notching for pipe runs
DESCRIPTION
Single stud shoe
Double stud shoe
Triple stud shoe
CTN QTY
50
25
10
Stud Guard
• 6 Holes
• 2 Nailers
• Protects pipes
PART NO.
S33013
114
Self Nailing Stud Guard with 2 Holes Centered
PART NO.
S180032
SIZE
1 1/2” x 3”
GAUGE
18
CTN QTY
200
SIZE
1 1/2” x 6”
GAUGE
16
CTN QTY
100
SIZE
3 1/2” x 6”
GAUGE
16
CTN QTY
25
GAUGE
16
16
16
16
20
20
16
16
CTN QTY
100
100
50
25
100
100
100
100
2 Hole Stud Guard
PART NO.
S16006
6 Hole Stud Guard
PART NO.
S163566
Self Nailed Stud Guard
PART NO.
S16009
S16012
S16018
S16024
S20012
S20009
S16005
S16003
SIZE
1 1/2” x 9”
1 1/2” x 12”
1 1/2” x 18”
1 1/2” x 24”
1 1/2” x 12”
1 1/2” x 9”
1 1/2” x 5”
1 1/2” x 3”
F.H.A. Strap - Galvanized Steel
Stud Shoe
PART NO.
S33021
S33022
S33023
S163566
S16006
SIZE
5” x 8”
GAUGE
16
• Tie plates
PART NO.
F12009
F18009
F12012
F18012
F12018
F18018
F12024
F18024
SIZE
1 1/2” x 9”
1 1/2” x 9”
1 1/2” x 12”
1 1/2” x 12”
1 1/2” x 18”
1 1/2” x 18”
1 1/2” x 24”
1 1/2” x 24”
GAUGE
12
18
12
18
12
18
12
18
CTN QTY
50
100
50
100
50
100
50
100
CTN QTY
25
Stud Guards
F.H.A. Strap
Galvanized Bracket
• For use on sinks, lavatories and
toilets on 16” center spuds
• For use with 1/2” and 3/4” CPVC;
1/2”, 3/4” and 1” copper or PEX
• 1 3/8” keyed holes, 20” long
• Use with B00016, B00017, B00018
and B00013
PART NO.
F18309
F18312
F18318
F18324
SIZE
3” x 9”
3” x 12”
3” x 18”
3” x 24”
GAUGE
18
18
18
18
CTN QTY
50
50
50
50
F.H.A. Strap
F180032
F160184
F163246
One Hole in Each Corner
SIZE
5” x 18”
GAUGE
16
CTN QTY
15
SIZE
1 1/2” x 3”
GAUGE
18
CTN QTY
200
GAUGE
16
16
16
16
16
16
16
CTN QTY
50
50
50
50
50
50
50
GAUGE
14
16
16
16
CTN QTY
50
50
50
50
GAUGE
16
16
16
16
16
16
16
CTN QTY
50
50
50
50
50
50
15
2 Holes
PART NO.
B00003
B00021
HR #
101-18
101-26
SIZE
1 1/2” x 12”
1 1/2” x 18”
1 1/2” x 24”
3” x 6”
3” x 9”
1 1/2” x 6”
1 1/2” x 9”
SIZE
1 1/2” x 12”
1 1/2” x 12”
1 1/2” x 18”
1 1/2” x 9”
Standard F.H.A. with 6 Offset Holes
PART NO.
F160126
F16016
F160186
F160246
F163186
F163246
F165186
SIZE
1 1/2” x 12”
1 1/2” x 16”
1 1/2” x 18”
1 1/2” x 24”
3” x 18”
3” x 24”
5” x 18”
C
DESCRIPTION
1/2” x 20”
1/2” x 26”
CTN QTY
50
50
• For use on water heater connections
• Use for 3/4” and 1” copper pipe
PART NO.
B00004
HR #
102-18
DESCRIPTION
3/4” - 1” x 20”
CTN QTY
50
Flat Copper Plated Bracket
• For use on 1/2”, 3/4” or 1” copper
pipe
Standard F.H.A. with 4 Offset Holes
PART NO.
F14012
F16012
F160184
F160094
CTN QTY
50
3 Holes Vertically Aligned
PART NO.
F160123
F160183
F160243
F160363
F160393
F160063
F160093
DESCRIPTION
1/2” - 1” x 20”
• For use on sinks, lavatories or
other fixtures
• Use for 1/2” copper pipe
F160243
PART NO.
F180032
HR #
103-18
F165181
PART NO.
F165181
PART NO.
B00001
PART NO.
B00005
HR #
107-18
DESCRIPTION
1/2” - 1” x 20”
CTN QTY
50
• Copper-Bonded™ steel
• For support of 1/2” and 3/4” pipes
on 4” or 8” centers
• Positions copper water supplies
for sinks, water closets, and other
fixtures
• 25 lb. load rating
PART NO.
B00025
HR #
150-20
DESCRIPTION
1/2” - 3/4” x 20”
CTN QTY
50
Carrier Bracket
• Copper plated
• Secures 1” stub out at 11 1/2”
above the rim
PART NO.
B00022
B00023
HR #
114-C
114-R
DESCRIPTION
Carrier Bracket
Carrier Bracket
CTN QTY
6
6
115
Stud Guards
Holdrite Bracket
Galvanized L Bracket
• 150 lb. load capacity
• Can attach to stud or directly to
wall
PART NO.
B00024
HR #
V2
DESCRIPTION
Pipe Bracket
CTN QTY
25
C Extruded Hole Copper Plated Bracket
pipe
• Extruded holes
PART NO.
B00006
B00019
HR #
108-20
108-26
DESCRIPTION
1/2” - 1” x 20”
1/2” - 1” x 26”
CTN QTY
50
50
Extruded Notches Copper Plated
Bracket
• For use with PEX on overhead
and side runs
• Use with B00-013, B00-016, B00017 and B00-018 inserts
PART NO.
HR #
B00009
709L
DESCRIPTION
Bracket with 1 3/8”
keyed holes-PEX
HR #
140
DESCRIPTION
1/2” - 3/4” x 20”
CTN QTY
50
Galvanized Lockright Pipe BracketCPVC
• For use on sinks or lavatories
using CPVC
• 20 gauge galvanized steel with 1”
holes on 2” centers
• Use with B00-014 and B00-015
PART NO.
B00008
HR #
601-20
DESCRIPTION
1/2” - 3/4” x 20”
CTN QTY
50
Galvanized Lockright Bracket
• For use on lavatories and toilets
• Use with B00-013, B00-016, B00017 and B00-018 inserts
PART NO.
HR #
B00010
709
DESCRIPTION
Bracket with 1 3/8”
keyed holes-PEX
HR #
601-26
DESCRIPTION
1/2” - 3/4” x 26”
CTN QTY
50
Bracket for Water Closet-Copper Clad
• For use on 1/2” copper pipe
• For use with water closets or hose bibbs
PART NO.
B00002
116
HR #
109-N-6
DESCRIPTION
1/2”
CTN QTY
50
CTN QTY
50
18 Gauge Galvanized Bracket-CPVC
• For use on residential toilets or
hose bibbs
• Use with B00-014 or B00-015
inserts
PART NO.
B00011
HR #
609-N-6
DESCRIPTION
Bracket with 1” hole
CTN QTY
50
Turnout Bend Support for PEX
• PEX turnout bend support for
potable water installations
PART NO.
B00013
HR #
704
DESCRIPTION
3/8” - 1/2”
CTN QTY
50
Insert for CPVC
• Fire retardant plastic
PART NO.
B00020
50
Galvanized Bracket
pipe
• Extruded holes
PART NO.
B00007
CTN QTY
PART NO.
B00014
B00015
HR #
604
605
DESCRIPTION
1/2” insert
3/4” insert
CTN QTY
100
100
Metal Stud Insulator
• Fire retardant plastic
• Use for copper pipe
PART NO.
B00016
B00017
B00018
HR #
404-R
405-R
406-R
DESCRIPTION
1/2” insulator
3/4” insulator
1” insulator
CTN QTY
100
100
100
Hooks & Nails
Schedule 40 Pipe Hanger
Pipe Hook
• Alternating screw and nail holes
• Load rating 250# max
• 10 gauge
Plain Steel
Copper Clad
Plain Steel
Galvanized
PART NO.
H30001
H30002
H30003
H30004
SIZE
1 1/2”
2”
3”
4”
CTN QTY
50
50
50
50
SIZE
1 1/2”
2”
3”
4”
CTN QTY
100
50
50
50
Vinyl
PART NO.
H30011
H30022
H30033
H30044
Plastic Coated Pipe Hook
• Steel pipe hook with plastic insulation
PART NO.
H12054
H12056
H12074
H12076
H12106
SIZE
1/2” x 4”
1/2” x 6”
3/4” x 4”
3/4” x 6”
1” x 6”
PART NO.
H10054
H10056
H10058
H10074
H10076
H10078
H10080
H10106
H10108
H10110
H10126
H10128
H10156
H10158
H10208
SIZE
1/2” x 4”
1/2” x 6”
1/2” x 8”
3/4” x 4”
3/4” x 6”
3/4” x 8”
3/4” x 10”
1” x 6”
1” x 8”
1” x 10”
1 1/4” x 6”
1 1/4” x 8”
1 1/2” x 6”
1 1/2” x 8”
2” x 8”
CTN QTY
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
SIZE
1/2” x 4”
1 1/2” x 6”
1/2” x 8”
3/4” x 4”
3/4” x 6”
3/4” x 8”
3/4” x 10”
1” x 6”
1” x 8”
1 1/4” x 6”
1 1/2” x 6”
2” x 8”
2” x 10”
CTN QTY
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
50/500
C
Copper Clad
CTN QTY
50/1000
50/1000
50/1000
50/1000
50/1000
“Copper Boy” Pipe Hook
PART NO.
H11054
H11056
H11058
H11074
H11076
H11078
H11080
H11106
H11108
H11126
H11156
H11208
H11210
J-Hook for CTS Water System
1/2” x 2 1/2” copper clad pipe hook
H10052
3/4” x 2 1/2” copper clad pipe hook
H10072
• Nail holes on all four sides - nails are included!
• No heat distortion even at 250°
• Eliminates corrosion and electrolysis on copper pipe
• Fabricated of durable ABS plastic
• FULL BAG QUANTITIES ONLY
CTN/MSTR
50/2200
50/500
Baby J-Hooks
PART NO.
J01050
J01075
J01100
Drive J-Hook
• Copper clad
PART NO.
H23050
CTS
1/2” x 3/4”
DESCRIPTION
1/2” CTS x 4” length
3/4” CTS x 4” length
1” CTS x 4” length
BAG/CTN QTY
25/300
25/300
25/200
Long Baby J-Hooks
CTN QTY
100
1/2” CTS x 7 1/2” length
J01057
3/4” CTS x 7 1/2” length
J01077
BAG/CTN QTY
25/200
25/200
Double J-Hooks
PART NO.
J01051
J01052
J01053
DESCRIPTION
1/2” CTS x 1/2” CTS x 4” length
BAG/CTN QTY
25/200
25/200
25/200
117
Pipe Strap/Clamps
J-Hook for Drain Pipe System
Copper Clad Nail
• Nails included
• Reduces installation time
• Glueable with universal cement
• Designed for PVC and ABS pipe
• Fabricated of durable ASB plastic
• Calibrated for 1/8” fall per foot - no more measuring &
adjusting for fall
• FULL BAG QUANTITIES ONLY
C
PART NO.
J01150
J01200
J01300
J01400
DESCRIPTION
1 1/2” DWV x 7” length
2” DWV x 7” length
BAG/CTN QTY
25/300
25/300
25/300
25/300
Pipe Strap
• Priced each
PART NO.
H15001
PART NO.
H22050
H22075
SIZE
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
CTN QTY
200
150
50
50
50
25
25
25
10
10
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN QTY
100
100
100
100
100
100
SIZE
3/8”
1/2”
3/4”
1”
CTN QTY
100
100
100
100
SIZE
1/2”
3/4”
CTN QTY
100
100
One-Hole Galvanized - IPS
PART NO.
H18050
H18075
118
CTN/MSTR
100/1300
100/1300
Full Clamp
PART NO.
H25050
H25075
H25100
TUBING SIZE
1/2”
3/4”
1”
CTN/MSTR
100/4000
50/2000
25/1025
Half Clamp
• Plastic clamp with preloaded nail for copper, CPVC,
polybutylene tubing
PART NO.
H24038
H24050
H24075
H24100
TUBING SIZE
3/8”
1/2”
3/4”
1”
CTN/MSTR
100/7500
50/1000
50/3000
50/2000
Insulating/Suspension Clamp
• Plastic insulating and suspension clamp in one
• Eliminates noise from tubing expansion and contraction
• For copper, CPVC and polybutylene tubing
Two-Hole Solid Copper - CTS
PART NO.
H16038
H16050
H16075
H16100
SIZE
1/2”
3/4”
• Plastic clamp with preloaded nail for copper, CPVC,
polybutylene tubing
Two-Hole Copper Clad - CTS
PART NO.
H15050
H15075
H15100
H15125
H15150
H15200
CTN/MSTR
200/2000
Copper Coated J-Nails
Two-Hole Galvanized - IPS
PART NO.
H13038
H13050
H13075
H13100
H13125
H13150
H13200
H13250
H13300
H13400
SIZE
1 1/4”
PART NO.
H26050
H26075
H26100
H26125
H26150
H26200
TUBING SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN/MSTR
50/1000
50/1000
50/600
50/500
25/500
25/350
Hanger Tape/Packing
Pipe Insulator
Perforated Hanger Iron
• Plastic insulator eliminates noise from expansion and
contraction
• For copper, CPVC and polybutylene tubing
• UPC listed
• Drill hole size 1 3/8”
PART NO.
H27050
H27075
H27100
TUBING SIZE
1/2”
3/4”
1”
CTN/MSTR
25/1000
25/1000
25/1000
Two-Hole Pipe Clamp
• Plastic clamp eliminates noise from tubing expansion and
contraction
• Supports copper, CPVC and polybutylene tubing
PART NO.
H28050
H28075
H28100
H28125
H28150
H28200
TUBING SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CTN/MSTR
100/1000
100/1000
50/500
50/750
25/500
25/250
• Alternating holes (bolt and nail)
Galvanized
PART NO.
H20001
H20002
H20003
H20005
H20006
H20007
H20010
H20011
H20012
Tub Hanger
T12001
CTN QTY
100
Metal Stud Pipe Insulator
GAUGE
20 (heavy)
24 (medium)
28 (light)
20 (heavy)
24 (medium)
28 (light)
20 (heavy)
24 (medium)
28 (light)
CTN QTY
50 rolls
50 rolls
50 rolls
10 rolls
10 rolls
10 rolls
5 rolls
10 rolls
10 rolls
SIZE
3/4” x 10’
3/4” x 50’
GAUGE
22 (heavy)
22
CTN QTY
50 rolls
10 rolls
C
Copper Clad
PART NO.
H20100
H20150
Plastic Hanger Tape
• Flexible, non-conductive polypropylene
• 3/4” wide, .050 thick
• 1/8” diameter holes every 3/4”
• 125 lb. ultimate load ASTM A-370-77
• Can be cut with scissors or utility knife
• Uses: pipe hanger, duct hanger and tubing utility strapping
F.H.A. Tub Hanger
• 12 gauge galvanized steel
• Adjustable on stud
SIZE
3/4” x 10’
3/4” x 10’
3/4” x 10’
3/4” x 50’
3/4” x 50’
3/4” x 50’
3/4” x 100’
3/4” x 100’
3/4” x 100’
PART NO.
H21010
H21025
H21050
H21100
H21101
DESCRIPTION
10’ roll poly bagged
100’ roll dispenser box
CTN/MSTR
1/200
1/50
1/20
1/30
1/25
Plastic Hanger Tape
• 125# max load
• 1/8” diameter holes every 3/4”
• 2” wide; .05 thickness; cuts with scissors
PART NO.
H29000
H29010
SIZE
3/8”, 1/2”, 3/4”
1”
CTN/MSTR
50/500
50/500
CTN/MSTR
1/5
• Approximately 165 lb. break strength
• Twisted yellow twine
• Holes are spread 1” apart on center
SIZE
2” x 10’
SIZE
2” x 100’
Mason’s Nylon Twine
Earthquake Strap
PART NO.
H20500
PART NO.
H21200
GAUGE
22
CTN QTY
10
#18 x 225’
T60001
#18 x 1100’
T60000
CTN/MSTR
24/192
12/72
119
Lead Supplies/Roofing Repair
Binder Sisal Twine
Lead Melting Pot
• Used to tie down material for hauling
5 lb. bale (approx. 2500’)
T60002
• Wire handle
CTN/MSTR
1/8
C Candle Wick Packing
PART NO.
L42006
L42008
SIZE
6” pot
8” pot
CTN QTY
1
1
Lead Pouring Ladle
• Medium packing in 2 ounce balls
• Wrought steel
Candle wick packing
T60003
CTN/MSTR
12/396
Graphite Packing
• Non-asbestos material in resealable spools
1/8” diameter x 12’ spool
T60005
1/4” diameter x 8’ spool
T60006
CTN/MSTR
12/120
12/120
• The original Oakum with benonite-expands over 10 times
when wet
• Baled in coils or cut length for easy use
• No tar in brown oakum
• CARTON QUANTITIES ONLY (except 1 lb. bags)
DESCRIPTION
Brown random cut
White 3/8” cord
White 3/8” cord (27” cut length)
Brown random cut
White 3/8” cord (27” cut length)
INNER PACK
10 - 5 lb. bags
6 - 10 lb. coils
10 - 5 lb. bags
1 lb. bags
1 lb. bags
SIZE
3” ladle
3 1/2” ladle
4” ladle
CTN/MSTR
1/100
1/50
1/50
Drum Trap Cover
Oakum
PART NO.
O15001
O15002
O15003
O15006
O15007
PART NO.
L42102
L42103
L42104
CTN/MSTR
1
1
1
1/20
1/20
Lead Wool
• Flanged, plated die cast
• Cover supplied with gasket
• D02-002 CARTON QUANTITIES ONLY
PART NO.
D02001
D02002
P55300
DESCRIPTION
Cover and gasket
Gasket only
Rough brass cover
CTN/MSTR
1/100
25/100
1/60
Trap Covers
• Stainless steel
C98001
C98002
5 3/4” flat SS trap cover
C98001
5 3/4” raised SS trap cover
C98002
CTN/MSTR
150/300
50/200
Wet-R-Dri Roofing Cement
• Five pound box
• All-weather plastic
• Chemically fortified to bond to water-covered, damp or dry
surfaces
• Great for emergency repairs under wet conditions
PART NO.
L40001
SIZE
5 pounds
CTN/MSTR
1/10
Lead Ingot
L42002
PART NO.
L40002
L42052
120
PART NO.
C09000
C09001
C09002
DESCRIPTION
5 gallon can
One gallon can
10.5 ounce cartridge
CTN/MSTR
1/1
1/6
1/12
L42052
SIZE
25 pounds (Handle w/ four 5 lb. plugs)
5 pounds
CTN QTY
1
1
Service Sink Repair
Foundation and Roof Coating
Galvanized Roof Flashing
• Non-fibered liquid damp-proof seal
• All weather plastic
• Chemically fortified to bond to water covered, damp or dry
surfaces
• Great for emergency repairs under wet conditions
1 Gal. Foundation and Roof Coating
C09003
CTN/MSTR
1/6
Sewage Ejector/Sump Pump Check
Valve
• Couplings are sized for IPS ID hose
• Combination unit for 1 1/2” and 1 1/4” IPS, 1 1/2” copper
PART NO.
C29150
C29200
C29126
DESCRIPTION
1 1/2” slip x 1 1/2” slip
2” slip x 2” slip
1 1/4” slip x 1 1/2” slip
CTN/MSTR
1/50
1/50
1/50
Flexible Discharge Hose
• Ideal for sump pumps, centrifugal pumps, and submersible
pumps
• Complete kit includes 24’ hose, 1 1/4” adapter and steel
clamp
• Double seal neoprene collar
• UPC, BOCA ad SBCCI approved
PART NO.
R40150
R40200
R40300
R40400
SIZE
1 1/4” and 1 1/2”
2”
3”
4”
FLANGE
8 3/4” x 12 1/2”
8 3/4” x 12 1/2”
10 3/4” x 14 1/2”
12” x 16”
CTN/MSTR
1/12
1/12
1/12
1/12
C
Aluminum Roof Flashing
PART NO.
R45150
R45200
R45300
R45400
SIZE
1 1/4” and 1 1/2”
2”
3”
4”
FLANGE
8 3/4” x 12 1/2”
8 3/4” x 12 1/2”
10 3/4” x 14 1/2”
12” x 16”
CTN/MSTR
1/12
1/12
1/12
1/12
All Neoprene Roof Flashing
1 1/2” Flex Discharge Hose Kit
C29123
1 1/4” Complete Kit
C29124
CTN/MSTR
1/5
1/5
Rooftite® Hi-Heat Silicone Flashing
• Silicone range is designed for high temperature applications up to 390°F
• Ideal for corrugated metal roofs
• Can be used on flat roofs
• Pipe diameter markings
• For plumbing, heating, air conditioning, electrical or exhaust
vents
• Pleated cone adjusts to any pitch up to 45° F
• Ozone and UV resistant
PART NO.
R16100
R16101
R16107
R16108
SIZE
0”-2 3/4”
2”-6 1/8”
6”-10 1/32”
9 1/2”-14 3/4”
CTN/MSTR
1/25
1/20
1/10
1/10
Rooftite® Roof Flashing
• Ideal for corrugated metal roofs
• Can be used on flat roofs
• Pipe diameter markings
• For plumbing, heating, air conditioning, electrical or
exhause vents
• Made of EPDM with flexible aluminum base
• Pleated cone adjusts to any pitch
• -30°F to +250°F
• Ozone and UV resistant
PART NO.
R15109
R15100
R15101
R15107
R15108
SIZE
0”-1 1/4”
0”-2 3/4” pipe
2”-6 1/8” pipe
6”-10 1/32” pipe
9 1/2”-14 3/4” pipe
CTN/MSTR
1/20
1/20
1/20
1/10
1/10
PART NO.
R50150
R50200
R50300
R50400
SIZE
1 1/4” and 1 1/2”
2”
3”
4”
FLANGE
9” x 11 3/8”
9” x 11 3/8”
10” x 13 1/4”
12” x 14 3/4”
CTN/MSTR
1/20
1/20
1/20
1/20
Neo-poly Roof Flashing
• Poly vinyl base
• Neoprene collar
PART NO.
R57150
R57200
R57300
R57400
SIZE
1 1/4” and 1 1/2”
2”
3”
4”
FLANGE
9 1/4” x 13”
9 1/4” x 13”
11 1/8” x 15”
12” x 15 1/2”
CTN/MSTR
1/12
1/12
1/12
1/12
Lead Roof Flashing
• Southeastern Code
• 2 1/2 pounds
• Multi-pitch from flat to 7/12”
PART NO.
R70150
R70200
R70300
R70400
SIZE
1 1/2”
2”
3”
4”
FLANGE
8 1/2” x 10 1/2”
8 1/2” x 10 1/2”
10 1/2” x 11 1/2”
10 1/2” x 11 1/4”
CTN QTY
12
12
6
6
121
Bolts & Screws
Instant Sealant
Flat Phillips Head Brass Wood Screw
• Flame resistant
• Fills holes and cracks
• Deadens sound
• Insulates against air conditioning and heat loss
• Prevents passage of dirt, water and insects
• Both 12 and 24 oz. cans spray in any position
• UPS GROUND AND MOTOR FREIGHT ONLY
C
12 oz. cans
S30012
24 oz. cans
S30024
CTN QTY
12
12
Hose and Hose Bracket for Service
Sink
• Heavy duty 300 cloth-reinforced 5/8” rubber hose (2 1/2”
long)
• 3/4” brass hose coupling at one end
• 5” x 3” stainless steel bracket with rubber grip
Hose with bracket
M05001
Bracket only
M05005
CTN/MSTR
1
1/25
Mop Hanger for Service Sink
• 24” x 3” stainless steel hanger with three rubber tool grips
• Anchors included
Mop hanger
M05003
CTN/MSTR
1/5
Anchor Bolt Kit
• Includes anchors, hex head screws
and drill bit
• Flat Phillips head
• Solid brass construction
PART NO.
F33300
F33301
F33302
F33303
SIZE
#12 x 1 1/4”
#12 x 1 1/2”
#12 x 2”
#14 x 1 1/4”
CTN QTY
100
100
100
100
Phillips Head Wood Screw
• Zinc plated
PART NO.
F33030
F33031
F33032
F33033
F33034
F33035
F33036
F33037
F33038
F33039
F33040
F33041
SIZE
#10 x 1 1/2”
#12 x 1”
#12 x 1 1/4”
#12 x 1 1/2”
#12 x 2”
#12 x 2 1/2”
#12 x 3”
#14 x 1 1/4”
#14 x 1 1/2”
#14 x 2”
#14 x 2 1/2”
#14 x 3”
CTN QTY
100
100
100
100
100
100
100
100
100
100
100
100
Hex Head Lag Screw
PART NO.
A33001
A33002
A33005
SIZE
#8 x 1”
#10 x 1 1/4”
#14 x 1 1/2”
PIECES
100
100
50
DRILL BIT
3/16”
1/4”
5/16”
CTN/MSTR
1/50
1/36
1/36
Stove Bolt with Nut
• Zinc plated
PART NO.
F33009
F33010
F33011
F33012
F33013
F33014
122
SIZE
3/16” x 3/4”
1/4” x 3/4”
1/4” x 1”
1/4” x 1 1/4”
1/4” x 1 1/2”
1/4” x 2”
PART NO.
F33140
F33141
F33142
F33143
F33144
SIZE
3/8” x 1”
3/8” x 1 1/2”
3/8” x 2”
3/8” x 2 1/2”
3/8” x 3”
CTN QTY
100
100
100
50
50
E-Z Anchor/Self-Drilling Wall Board
CTN QTY
100
100
100
100
100
100
• Die cast zinc
• Installs with #2 Phillips screwdriver
E-Z Anchor with 1 1/4” screws
A33010
CTN QTY
10
Washers/Clamps
Toggle Bolt
Drill Point Tech Screw
• Zinc plated
• Spring loaded wing
Toggle Bolt
PART NO.
F33060
F33061
F33062
F33063
F33064
F33065
Toggle Wing
SIZE
3/16” x 3/4”
1/4” x 3”
1/4” x 4”
1/4” x 6”
3/8” x 4”
3/8” x 6”
CTN QTY
50
50
50
50
50
50
SIZE
3/16”
1/4”
3/8”
1/2”
CTN QTY
100
100
100
100
Toggle Wing Only
PART NO.
F33066
F33067
F33068
F33069
Hex Head Tapping Screw
• Zinc plated
PART NO.
F33101
F33102
F33103
F33104
F33105
F33106
F33107
F33108
F33109
F33110
F33111
F33112
F33113
F33114
F33115
F33116
SIZE
#7 x 1/2”
#7 x 1/2”
#8 x 1/2”
#8 x 1/2”
#8 x 3/4”
#8 x 3/4”
#8 x 1”
#8 x 1”
#8 x 1 1/2”
#8 x 1 1/2”
#8 x 2”
#8 x 2”
#10 x 3/4”
#10 x 3/4”
#10 x 1”
#10 x 1”
CTN QTY
100
1000
100
1000
100
1000
100
500
50
500
50
250
100
1000
100
500
PART NO.
F33120
F33121
F33122
F33123
F33124
F33125
F33126
F33127
F33128
F33129
F33130
F33131
F33132
SIZE
#8 x 1/2”
#8 x 1/2”
#8 x 3/4”
#8 x 3/4”
#10 x 3/4”
#10 x 3/4”
#10 x 1”
#10 x 1”
#10 x 1 1/2”
#12 x 3/4”
#12 x 1”
#12 x 1 1/2”
#12 x 2”
CTN QTY
100
500
100
500
100
500
100
500
100
100
100
100
100
C
Hex Nut
• Zinc plated
PART NO.
F33080
F33081
F33082
F33083
SIZE
1/4” - 20
5/16” - 18
3/8” - 16
1/2” - 13
CTN QTY
100
100
100
50
Zinc Plated Fender Washer
PART NO.
F33098
F33096
F33097
SIZE
1/4”
3/8”
1/2”
OD
1 1/2”
1 1/2”
2”
CTN QTY
100
100
100
Flat Washer
• Zinc plated
PART NO.
F33094
F33095
SIZE
3/8”
1/2”
OD
1”
1 3/8”
CTN QTY
100
100
123
Conduit Hanger
Carrier Nuts and Washer Set
SAVE$
$$$
Conduit Hangers
• 4 nuts and washers
• 5/8 - 11 threads
• Much lower cost than specification
companies
• Packed with bolts and nuts
Zinc Plated
C
Carrier nuts and washer set (4-pack)
C56100
CTN/MSTR
1/100
Universal Beam Clamp
• 3/8” UNC bolt thread
• Steel set screw
PART NO.
H60375
H60050
H60625
H60075
SIZE
3/8”
1/2”
5/8”
3/4”
ROD SIZE
3/8”
1/2”
5/8”
3/4”
CTN QTY
25
25
25
25
Copper Pipe Hangers - Bell & Milford
Types
• Copper clad
PART NO.
H14050
H14075
H14100
H14125
H14150
H14200
H14250
H14300
H14350
H14400
CODE NO.
RIGID
THIN WALL
0
1
2
3
4
5
6
7
8
9
1/2”-3/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
1/2”
3/4”
1”
1 1/2”
2”
-
CODE NO.
RIGID
THIN WALL
0
1
2
3
4
5
6
7
8
9
1/2”-3/8”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
1/2”
3/4”
1”
1 1/2”
2”
-
CTN QTY
100
50
50
50
25
25
10
10
10
10
Copper Plated
PART NO.
H17050
H17075
H17100
H17125
H17150
H17200
H17250
H17300
H17350
H17400
Swivel Ring
CTN QTY
100
100
50
50
25
25
25
25
25
25
• Supplied with nuts
Zinc Plated
Bell Type
Milford Type
Bell Type
PART NO.
H83050
H83075
H83100
SIZE
1/2”
3/4”
1”
CTN/MSTR
25/500
25/500
25/500
SIZE
1/2” x 6”
3/4” x 6”
1” x 6”
1/2” x 12”
3/4” x 12”
1” x 12”
CTN QTY
25
25
25
25
25
25
Milford Type
PART NO.
H84050
H84075
H84100
H85050
H85075
H85100
124
PART NO.
H65050
H65075
H65100
H65125
H65150
H65200
H65250
H65300
H65400
H65500
H65600
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
CTN QTY
25
25
25
25
25
20
20
10
10
5
5
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
CTN QTY
25
25
25
25
25
20
20
10
10
Copper Plated
PART NO.
H66050
H66075
H66100
H66125
H66150
H66200
H66250
H66300
H66400
Water Meter Supplies
Zinc Plated Clevis Hanger
Hinged Split Ring
Standard - 401# Steel
PART NO.
H68050
H68075
H68100
H68125
H68150
H68200
H68250
H68300
H68350
H68400
H68500
H68600
H68800
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
5”
6”
8”
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
7/8”
CTN QTY
25
25
25
25
25
20
20
10
10
10
5
5
5
SIZE
1/2”
3/4”
1”
1 1/2”
2”
2 1/2”
3”
4”
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
5/8”
CTN QTY
25
25
25
25
20
20
10
10
Light Duty - 400# Steel
PART NO.
H69050
H69075
H69100
H69150
H69200
H69250
H69300
H69400
Zinc Plated for Iron Pipe
PART NO.
H72375
H72050
H72075
H72100
H72125
H72150
H72200
H72250
H72300
H72400
SIZE
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
CTN QTY
25
25
25
25
25
25
20
20
10
10
ROD SIZE
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
CTN QTY
25
25
25
25
25
25
10
C
Copper Plated for Copper Tube
PART NO.
H73375
H73050
H73075
H73100
H73125
H73150
H73200
SIZE
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
Ceiling Flange
DIMENSIONS
A
Riser Clamp
2”
• For Schedule 40 iron pipe only - Not for soil pipe
PART NO.
H70050
H70075
H70100
H70125
H70150
H70200
H70250
H70300
H70350
H70400
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
OVERALL WIDTH
9 3/8”
9 3/8”
9 3/8”
10”
10 3/8”
10 7/8”
11 1/4”
11 3/4”
13 1/4”
13 1/2”
CTN QTY
25
25
25
25
25
25
25
10
10
10
PART NO.
H80375
H80050
H81375
H81050
H82375
H82050
SIZE
3/8” plain finish
1/2” plain finish
3/8” zinc finish
1/2” zinc finish
3/8” copper finish
1/2” copper finish
B
C
1 3/8” 2 3/4”
CTN QTY
25
25
25
25
25
25
Threaded Steel Rod
• Priced per rod
PART NO.
T38006
T38010
T12006
T12010
T38106
T38110
T12106
T12110
DESCRIPTION
3/8” x 6’ plain finish
3/8” x 6’ zinc finish
CTN QTY
25
25
12
12
25
25
12
12
125
Meter Boxes
10” Economy Meter Box
Drop-In Concrete Anchor
• Priced per rod
C
3/8” Drop-In Anchor
T38038
1/2” Drop-In Anchor
T12050
CTN/MSTR
50/900
50/500
Rod Coupling Nut
• Snap-in green lid
• 96 per pallet
• Hex, zinc plated, carbon steel
PART NO.
R60001
R60002
R60003
R60004
DESCRIPTION
1/4” x 7/8”
3/8” x 1 3/4”
1/2” x 1 3/4”
5/8” x 2 1/8”
CTN/MSTR
50/1000
50/1000
50/1000
50/200
PART NO.
DESCRIPTION
CTN/MSTR
10” rectangular box and lid
1/96
M06001
10” green snap-in lid only
1
M06002
Note: All items shown are for non-vehicular applications. Concrete and asphalt
installations are not recommended for plastic parts.
12” Water Meter Box
Water Meter Box Keys and Covers
M07001
M25900
M07002
• All brass
CTN/
MSTR
Meter box key
1/100
Combination key and wrench 1/50
Penta head meter box and
1/15
roadway box wrench
M25900 bottom view
M07001
M07002
M25900
Water Meter Coupling Complete
• Heavy cast brass
• Complete with gasket
• LEAD FREE
PART NO.
M20058
M20075
M20100
SIZE
1/2”
3/4”
1”
NPSM
3/4”
1”
1 1/4”
LENGTH
2 3/8”
2 1/2”
2 5/8”
NPT
1/2”
3/4”
1”
CTN/MSTR
25/100
1/100
1/100
PART NO.
DESCRIPTION
CTN/MSTR
12” box and solid green lid
1/72
M12001
12” box and black reader lid
1/72
M12002
12” box and lid marked “sewer”
1/72
M12022
6” extension
1/42
M12003
12” solid green lid only
1
M12005
12” black reader lid only
1
M12006
12” box and solid black lid
1/72
M12009
12” Water Meter Box with Solid Cast
Iron Lid
Gasket Only for Water Meter
Couplings
PART NO.
M20581
M20751
M20101
126
DESCRIPTION
5/8” gasket for coupling
3/4” gasket for coupling
1” gasket for coupling
CTN QTY
25
25
25
PART NO.
M12100
M12085
DESCRIPTION
12” box with cast iron lid
Cast iron cover only
CTN QTY
1
1
Meter Boxes
12” Standard Meter Box with Plastic
Lid and Cast Iron Reader
6” Residential Valve Boxes
Emitter Knockout
(Both Sides)
1” Diameter
Cover Lift Hole
6 1/8”
6 1/8”
COVER WEIGHT
6 oz.
1 5/8”
9”
Marking
Snap Lock
Tab
C
2 1/4” x 2 9/16” Pipe Slot (2 Places)
• 72 per pallet
PART NO.
DESCRIPTION
CTN QTY
12” box with plastic lid & cast iron reader
1
M12004
• Overlapping cover keeps dirt or grass from between body and lid
• Valve box can be extended with any 6” plastic or iron pipe
• 36 per carton
PART NO.
DESCRIPTION
CTN/MSTR
6” valve box 9” tall
1/36
M06006
6” green snap-in lid only
1
M06007
12” Irrigation Box (6” Deep)
10” Round Valve Boxes
Molded In
Nut Receptor
Marking
10”
PART NO.
DESCRIPTION
CTN QTY
6” depth with green lid
1
M12007
1
M12005
1
M12006
12” valve box 6” deep with reader lid
1
M12008
15” Jumbo Water Meter Boxes
Recessed
Bolt Locator
10”
COVER WEIGHT
1 1/8”
10”
1 1/8”
Snap
Lock Tab
2 1/4” Pipe Slot (2 Places)
Cover Lift Hole
12 3/4”
• Overlapping cover keeps dirt or grass from between body and lid
• 99 per pallet
PART NO.
DESCRIPTION
CTN QTY
10” round body and green lid
1/180
M06010
PART NO.
DESCRIPTION
CTN/MSTR
15” box and green solid lid
1/48
M15001
6” extension for M15001
1/36
M15009
15” box and black reader lid
1/48
M15002
1
M15004
1
M15005
6” extension with solid green lid
1
M15006
127
Boxes
Shipping Boxes
• 32 ECT board test
• Kraft (brown)
• 200 pound burst strength
• BUNDLE QUANTITIES ONLY
C
PART NO.
BOX012
BOX011
BOX008
BOX006
SIZE
12 3/4”L x 12 3/4”W x 13 1/2”D
11 1/8”L x 11 1/8”W x 9 1/8”D
8”L x 8”W x 8”D
6”L x 6”W x 8”D
CTN/MSTR
1/20
1/20
1/20
1/20
SIZE
4”L x 12”W x 6 5/8”D
5 1/4”L x 11 3/4”W x 6”D
8”L x 12 1/4”W x 7 1/2”D
12”L x 12 3/8”W x 7/12”D
CTN/MSTR
1/20
1/20
1/20
1/20
Bin Boxes
PART NO.
BIN004
BIN005
BIN008
BIN012
Plastic Tub Box
PART NO.
T40001
T40002
SIZE
13”L x 13”W x 7”D
12”L x 8 1/8”W x 6 1/2”D
CTN QTY
1
1
Cardboard Tub Box
PART NO.
T40003
T40004
T40005
T40007
T40008
128
SIZE
12”L x 8”W x 8 1/2”D wax coated
14 1/2”L x 11 5/16”W x 6”D wax coated
15”L x 12”W x 9”D
12”L x 12”W x 9”D
12”L x 12”W x 12”D non-coated
CTN/MSTR
1/10
1/10
1/10
1/10
1/10

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION C

Transcription

Similar documents

pvc dwv fittings.................................................... 339-346

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION D

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION F

Refraction Unit