Automatic finishers range.pptx

© Trevil 2013 – All rights reserved - 1303081 00 0
Automatic finishers range
Trevil srl
Last updated: march 8, 2013
© Trevil 2013 – All rights reserved - 1303081 00 1
Automatic finishers
•  For shirts, jackets, coats
•  For trousers
1
© Trevil 2013 – All rights reserved - 1303081 00 2
Customer’s investment capability
Finishers for shirts, jackets, coats
•  High productivity, no need
for touch-ups
•  Dedicated machines
•  High investment
Dedicated
Tensioning
Finishers
Treviform
Trevistar
•  Medium range productivity,
some touch-ups may be needed
•  One machine finishes a variety
of garments
•  Medium investment
Utility
Tensioning
Finishers
Princess Ultra
•  Manual touch-up needed in most cases.
Not suited after wetcleaning.
•  One machine finishes a variety of garments
•  Small investment
Utility
NON-tensioning
Finishers
Easyform
Customer’s productivity requirements
2
© Trevil 2013 – All rights reserved - 1303081 00 3
For shirts and blouses
Trevistar
Princess Ultra
•  Dedicated for men shirts.
•  Best results with wet shirts.
•  Utility finisher for ladies’
blouses, men’s shirts, labcoats
and for jackets, coats, etc.
•  Garments may be dry or wet.
3
© Trevil 2013 – All rights reserved - 1303081 00 4
For jackets and coats
Treviform
Princess Ultra
•  Dedicated for jackets
and coats.
•  It also finishes ladies’
dresses and knitwear.
•  Utility finisher for
jacket, coats, ladies’
dresses, ladies’
blouses, men’s shirts,
labcoats, etc.
4
© Trevil 2013 – All rights reserved - 1303081 00 5
Examples of garments that can be finished with each
machine
man
-
woman
- ü ü ü ü
kid
- ü ü ü ü ü
-
Treviform
ü ü ü ü ü ü ü ü ü ü ü ü ü
Princess Ultra
ü ü ü -
- ü
- - - -
- -
-
Trevistar
5
© Trevil 2013 – All rights reserved - 1303081 00 6
Finishers for jacket and coats – features comparison
Treviform
Princess Ultra
•  Option
•  Standard
•  Standard
•  Option
•  No inflatable bag (better
finish of inner linings)
•  Optional pneumatic vent
clamps
•  Rotating form for easier
positioning and possibility of
touchup during cycle
• 
• 
• 
• 
Shared features
•  Shoulder width adjustment
•  Shoulder shape for jackets
•  Vertical tensioning
•  Front and rear clamps
•  Side expanders
•  Side clamps
•  Anti-stretching feature
•  Photocell for automatic height search
•  Optional iron for touchups on the form
Differences
Advanced control panel
Inflatable bag
Manual vent clamps
Fixed form
6
© Trevil 2013 – All rights reserved - 1303081 00 7
Finishers for shirts – features comparison
Trevistar
Princess Ultra
Shared features
•  Pneumatic
•  Shoulder width adjustment
•  Shoulder shape for shirts
•  Vertical tensioning
•  Front heated clamp with adjustable thermostat
•  Side expanders
•  Side clamps
•  Anti-stretching feature
•  Standard
•  Photocell for automatic height search
•  Optional iron for touchups on the form
•  Standard
•  Short sleeve clamps
Differences
•  Short form (only shirts)
•  Only man sizes
•  Optional modules for shoulder
drying and cuff placket
finishing
•  Front hem clamps
•  Manual
•  Option
•  Option
•  Long form (also for labcoats)
•  Narrow shoulders, narrow bust
for lady and kid sizes
7
© Trevil 2013 – All rights reserved - 1303081 00 8
Trevistar Shirt Finisher
Application
Features
Finishing of wet men’s shirts with long or short sleeves.
Shoulder width: from 46 to 56 cm.
Max length: 93 cm
•  Control board that can store up to 9 customized
programs, programmable by the user
•  “Back cycle” button to undo mistakes
•  Heated front clamp with temperature adjustment
•  Antistretch device
•  Pneumatic adjustment of cuff clamps height with
self-repositioning at desired height
•  Pneumatic adjustment of shoulder width
•  Pneumatic short sleeve device
•  Rounded shape for cuff
•  Tensioning carriage with 5 clamps, each of them
programmable independently
Minimum production*
100 pcs/day
Maximum productivity** 30-50 shirts/hour
Options
•  Device for faster drying of shoulder seams and
yoke
•  Cuff placket press
•  Iron
• Electric iron
• Steam electric iron
• All steam iron
•  Water spray group
• This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time. Extraction degree influences productivity. We recommend 35% humidity.
8
© Trevil 2013 – All rights reserved - 1303081 00 9
Treviform form finisher
Application
Features
Finishing of jackets, coats, etc.
Shouder width: from 36 to 56 cm
Max length: 140 cm
•  Removable lapel clamp
•  Antistretch device
•  Control board that can store up to 9 customized
programs
•  180° rotation of the form
•  Automatic height positioning
•  Wooden sleeve expanders
Minimum production*:
> 25 pcs/day
Maximum productivity**: 50 pcs/hr
•  Manual clamps for vents
Options
• All-steam iron
• Pneumatic vent clamps
• 360° rotation of the form
• 2HP motor (standard is 1.5HP)
• Electronic control of blowing
• Side clamps (recommended for leather)
• Tensioning sleeve clamps
• Sleeve paddles for classic jacket shaping
* This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time.
9
© Trevil 2013 – All rights reserved - 1303081 00 10
Princess Ultra
Application
Fatures
Finishing of garments for the upper body, either wet or
dry, either drycleaned or wetcleaned.
Shoulder width: from 38 to 54 cm
Max length: 110 cm
Minimum production*:
Maximum productivity**:
•  Dual function rotating front clamp (hot for wet
garments / cold for dry garments)
•  Hot air drying
•  Removable collar clamp
•  Adjustable shoulder width and shape
•  Antistretch device
•  Carriage with three tensioning clamps
•  Control board that can store up to 9 customized
programs
•  Repositionable console
•  Wooden sleeve expanders
> 20 pcs/day
depends on the garment
Some examples:
Wet shirts
20-30 pcs/hr
Dry blouses
40-60 pcs/hr
Jackets
25-35 pcs/hr
Options
• 
• 
• 
• 
Touch up iron
Spray gun
Short sleeve clamps
Photocell for automatic positioning of carriage
height
•  Cuff expanders
*
This is the limit below which the investment is not worthwhile.
Varies with: desired payback time; total investment amount; cost of
electricity.
** Considers Cycle time + setup time.
10
© Trevil 2013 – All rights reserved - 1303081 00 11
Finishers for trousers
Pantastar
• 
• 
• 
• 
Complete trouser machine
Finishes the top
Presses the crease
For all styles and type of
fabric (man and woman, with
spandex, corduroy, etc.)
Pantamat
•  Toppers
•  Finishes the top, does not finish
the crease
•  Requires a table or leg press to
finish the crease
11
© Trevil 2013 – All rights reserved - 1303081 00 12
Pantastar
Application
Features
Any style of trousers, either long or short.
Any type of fabric.
• 
• 
• 
• 
Minimum production*: > 120 pcs/day
Maximum productivity**: 30-40 pcs/hr
Back pedal to undo mistakes
Electronic control board with 10 customizable programs
Troubleshooting software for PC
Combines the features of a topper and of a leg press
ADVANCED TOPPER features:
•  3D waistband tensioning: allows to shape the waistband
according to trouser style
•  Antistretch feature for waistband and leg length
•  Pleat paddles
•  Electronic adjustment of blowing strength
LEG PRESS features:
•  Automatic folding to decrease operator errors
•  Targeted steaming of the crease, to avoid side seam
impressions and shine
•  Adjustment of press pressure
Options
•  Utility carriage for both creased and uncreased trousers
•  Several touch-up accessories
* This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time.
12
© Trevil 2013 – All rights reserved - 1303081 00 13
Trouser toppers – Comparison
5308
5309
5310
Waistband tensioning
Side to side
Front-to-back
Carriage type
Utility carriage
Utility carriage
(for creased and
uncreased trousers)
Photocell operated
(for creased trousers)
Features
•  Anti-stretching function
independent for
waistband and leg
•  Anti-stretching function
independent for
waistband and leg
•  Pleat clamps
•  Anti-stretching function
for waistband
•  Pleat clamps
Type of garment
•  Any type of trousers
•  Tube-shaped skirts
•  Optimal for Denim
•  Any type of trousers
•  Optimal for trousers
with pleats
•  Only creased trousers
Suitable after cleaning
process
•  Dry cleaned or washed
•  Dry cleaned or washed
•  Mainly drycleaned
13
© Trevil 2013 – All rights reserved - 1303081 00 14
Pantamat 5308
Application
Features
Any style of trousers, either long or short.
Tube skirts.
•  Side to side waistband tensioning
•  Utility carriage for both creased and uncreased
trousers
•  Antistretch feature for waistband and leg length
•  Back pedal to undo mistakes
•  Electronic control board
•  Control panel on the front of the machine
•  Blowing strength adjustment
Minimum production*: > 20 pcs/day
Maximum productivity**: 55-90 pcs/hr
Options
•  Waistband size selector
•  Leg length selector
•  2HP motor (standard is 1.5HP)
* This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time.
14
© Trevil 2013 – All rights reserved - 1303081 00 15
Pantamat 5309
Application
Features
Any style of trousers, either long or short.
Pleat clamps and waistband shape make this
machine optimal for classic trousers.
•  Front to back waistband tensioning
•  Pleat clamps
•  Utility carriage for both creased and uncreased
trousers
•  Antistretch feature for waistband and leg length
•  Back pedal to undo mistakes
•  Electronic control board
•  Control panel on the front of the machine
•  Blowing strength adjustment
Minimum production*: > 20 pcs/day
Maximum productivity**: 55-90 pcs/hr
Options
•  2HP motor (standard is 1.5HP)
* This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time.
15
© Trevil 2013 – All rights reserved - 1303081 00 16
Pantamat 5310
Application
Features
Creased trousers
• 
• 
• 
• 
• 
• 
• 
• 
• 
Minimum production*: > 20 pcs/day
Maximum productivity**: 55-90 pcs/hr
Front to back waistband tensioning
Pleat clamps
Leg carriage for creased trousers
Automatic positioning of leg carriage
Antistretch feature for waistband
Back pedal to undo mistakes
Electronic control board with 10 programs
Control panel on the front of the machine
Blowing strength adjustment
Options
•  2HP motor (standard is 1.5HP)
* This is the limit below which the investment is not worthwhile. Varies with: desired payback time; total investment amount; cost of electricity.
** Considers Cycle time + setup time.
16