SharkBite Push-Fit Fittings Spec Sheet

Transcription

SharkBite Push-Fit Fittings Spec Sheet
Specifications: HB001 • Issue Date May 2009
SharkBite Push-Fit Fittings
®
For Copper, CPVC or PEX Pipe
Description
The SharkBite® push-fit fittings allow the user to connect pipe in seconds with relative ease.
Tee
features and benefits
Instant push-fit connection for increased ease-of-use:
No soldering, clamps, unions, or glue required.
Fittings certified to 200 PSI and 200°F (93°C):
Proven durability and quality.
Fits copper tubing, and CTS CPVC and PEX:
Connects all three types in any combination.
Integral tube liner for PEX installations:
Integrated design means no loose components, ensures secure, reliable connection.
Design certified and agency listed:
Inspector friendly, peace of mind!
Straight
Coupling
Compact, robust DZR brass body:
Foundation of a strong, corrosion resistant, durable fitting.
Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable
water and hydronic heating water distribution:
Quality engineered and manufactured.
Approved to be used underground and behind walls without access panels.
Designed for hydronic heating as well as potable water distribution.
SPECIFICATION
The tube shall be inserted into the SharkBite® push-fit fitting in the first stage through a release collar
and then through a stainless steel grab ring. The grab ring has teeth that open out and grip onto the
tube. At the second stage the tube shall be pushed through an O-ring protector which aligns the tube.
A specially formulated EPDM O-ring shall be compressed between the wall of the fitting and the tube
before the end of the tube reaches the tube stop. Only when the tube has passed through the O-ring and
reached the tube stop shall a secure joint be created. The fitting shall be a SharkBite® push-fit fitting.
Elbow
typical installation
Disconnecting a joint:
Connecting a joint:
No. 2
Mark pipe
approx. 1"
from end
Push the pipe and fitting together firmly with a twisting action until it clicks. Push the disconnect clip against the release collar and pull the pipe with a twisting action.
Allow at least 1" clearance between fittings for disconnection.
(Please consult with local plumbing codes concerning specific water heater piping requirements.)
specification data
Performance:
Maximum working pressure . . . . . . . . 200 psi
Maximum temperature . . . . . . . . . . . . 200°F (93°C)
Service . . . . . . . . . . . . . . . . . . . . . . . . . Potable water
Materials:
Body . . . . . . . . . . . . . . . . . . . . . . . . . . DZR brass
O-ring . . . . . . . . . . . . . . . . . . . . . . . . . . EPDM
Grab ring . . . . . . . . . . . . . . . . . . . . . . . Stainless steel
Tube support liner . . . . . . . . . . . . . . . . Polysulfone
Finish:
Natural Brass or Chrome Plated
Certifications
The SharkBite® push-fit fittings have been design certified and listed to ASSE 1061/NSF 61.
The SharkBite® push-fit fittings are listed by IAPMO and are certified for potable and hydronic
heating water distribution (note: Glycol mixture for hydronics is not to exceed 50% concentration).
The SharkBite® push-fit fittings have been certified for underground applications and as a
manufactured joint without access panels and they meet UPC, IPC and cUPC requirements.
Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: 1-877-700-4280 • www.cashacme.com
A Division of the Reliance Worldwide Corporation
Specifications: HB001 • Issue Date May 2009
SharkBite Push-Fit Fittings
®
For Copper, CPVC or PEX Pipe
D
C
A
A
A
B
B
A
C
B
Straight Coupling Dimensions
P/N
A
B
1.59"
U004
1/4"
U006
3/8"
1.84"
U008
1/2"
2"
U016
3/4"
2.36"
U020
1"
2.72"
B
Elbow Dimensions
P/N
A
U244
U276
U246
U272
U248
U256
U260
U274
U280
U308
B
A
Reducing Coupling Dimensions
P/N
A
B
C
U009
3/8"
1/2"
2.0"
U058
3/4"
1/2"
2.2"
U060
1"
3/4"
2.51"
1/4"
1/4"
3/8"
1/2"
1/2"
3/4"
1"
3/4"
1/2"
1/2"
B
1/4"
3/8" MIP
3/8"
3/8"
1/2"
3/4"
1"
1/2"
1/2" MNPT
1/2" FNPT
C
1.16"
1.16"
1.28"
1.43"
1.36"
1.64"
1.933"
1.373"
1.21"
1.21"
C
Tee Dimensions
P/N
U358
U360
U362
U363
U364
U370
U374
U412
U416
U444
U454
A
B
End Stop Dimensions
P/N
B
A
U512
U514
U518
U520
C
B
3/8"
1/2"
3/4"
1"
A
1.11"
1.08"
1.32"
1.52"
B
1/4"
3/8"
1/2"
1/2"
3/8"
3/4"
1"
3/4"
1"
3/4"
3/4"
C
1/4"
3/8"
1/2"
1/2"
3/8"
3/4"
1"
3/4"
1"
1/2"
1/2"
D
1/4"
3/8"
1/2"
3/8"
1/2"
3/4"
1"
1/2"
3/4"
3/4"
1/2"
2.30"
2.77"
2.72"
2.85"
2.77"
3.24"
3.84"
3.04"
3.63"
3.08"
2.92"
A
A
B
A
B
B
A
C
Drop Ear Elbow Dimensions
P/N
C
Connector Dimensions
P/N
U066
U068
U070
U072
U092
U088
U094
U110
U118
U120
U116
U134
U138
U140
U142
A
B
1/4"
1/2"
3/8"
1/2"
3/4"
3/4"
1"
1/4"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1"
C
1/2" FNPT
3/4" FNPT
1/2" FNPT
1/2" FNPT
1/2" FNPT
3/4" FNPT
1" FNPT
1/2" MNPT
1/2" MNPT
1/2" MNPT
3/4" MNPT
3/4" MNPT
1/2" MNPT
1" MNPT
3/4" MNPT
1.61"
1.75"
1.73"
1.64"
1.83"
1.88"
2.17"
1.64"
1.77"
1.64"
1.75"
1.89"
1.90"
2.48"
2.11"
A
U249
1/2"
U332
3/8"
U334
1/2"
U335*
1/2"
U340
3/4"
*Hy-Ear Elbow
B
1/2"
1/2" FNPT
1/2" FNPT
1/2" FNPT
3/4" FNPT
C
C
C
2.20"
1.83"
1.77"
2.0"
2.5"
Disconnect Tong Dimensions
Fitting Adapter Dimensions
P/N
U766
U772
A
3/4" FNPT
1" FNPT
B
P/N
C
3/4"
1"
2.83"
2.83"
SLIP END
A
A
C
Fitting Reducer Dimensions
A
B
3/8"
3/8"
1/2"
3/4"
1/2"
3/4"
1"
1"
P/N
Slip Coupling* Dimensions
C
2.08"
2.27"
3"
2.5"
P/N
U3008
U3016
U3020
A
B
1/2"
3/4"
1"
C
1.075"
1.355"
1.64"
A
4.46"
4.42"
4.5"
1/4"
3/8"
1/2"
3/4"
1"
B
C
Straight Stop (Chrome Plated) Dimensions
P/N
23037-0000
A
1/2"
B
3/8" compression
C
2.68"
C
6.5"
6.5"
6.5"
P/N
A
(Chrome Plated)
B
C
U3531 1/4" 7/8" ballcock 1.58"
P/N
B
0.3"
0.3"
0.3"
0.4"
0.4"
B
C
Faucet Connector Dimensions
(Chrome Plated)
A
1.19"
1.22"
1.22"
1.72"
2"
A
C
Ballcock Connector Dimensions
B
Note: Disconnect Clips sold separately
A
B
Size
U706
U708
U710
U712
U714
B
C
B
2"
2"
2"
Disconnect Clip Dimensions
*For use with copper only.
A
A
1.7"
1.7"
1.7"
B
C
U719
U721
U722
U724
1/2"
3/4"
1"
B
A
P/N
Fits SharkBite
U711
U713
U715
U3525
A
B
C
1/4" 1/2" NPS 1.58"
Stop Connector Dimensions
(Chrome Plated)
P/N
A
B
A
B
B
A
C
C
Angle Stop (Chrome Plated) Dimensions
P/N
23036-0000
A
1/2"
B
3/8" compression
C
2.58"
Ballcock Elbow Dimensions
(Chrome Plated)
P/N
U3537
A
B
C
1/4" 7/8" ballcock 1.05"
Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: 1-877-700-4280 • www.cashacme.com
A Division of the Reliance Worldwide Corporation
C
U3523 1/4" 9/16" X 24 UNEF 1.61"
09-CAC-133 5.14.09 Printed in USA