Product Solutions Guide

Transcription

Product Solutions Guide
2014
Product Solutions Guide
2013
Protect
Organize
Control
Index
KNOWLEDGE SERVICE SOLUTIONS
800-479-3875
Product
General Purpose Fuses
Midget/Electronic
Fuse Holders & Blocks
Page
3-5
6
6-7-8
Fuse Reducers/Puller/Clamps
8
Special Purpose Fuses
9
Telecom/Capacitor fuses
10
Semiconductor Fuses
Solar Product
11-12
15
High Voltage & Accessories
16-17
Panel Building Products
18-21
Automation Products
22
Maintenance Kits
23
Enclosures
24-27
Our Partners
DRIESCHER
General Purpose Fuses
KLPC Series CLASS L
CCMR Series Class CC/CD
KLPC series POWR-PRO fuses provide ideal overcurrent protection for
service switches, switchboard mains
and feeders, bolted pressure contact
switches, motor control centers, transformers, power circuit protection, and
other applications requiring 200 - 6000
ampere fuses.
• Voltage Rating:
600 VAC / 480 VDC
• Interrupting Rating:
300,000 AC / 20,000 DC
amperes
• Ampere Range:
200 - 6000 amperes
• Time Delay
KLPC replaces competitor’s: KRPC,A4BQ
The CCMR series POWR-PRO CC fuses are
true dual element, time-delay fuses specifically
engineered for space-saving motor branch circuit protection. These fuses are recommended
for motor circuits up to 40 HP and for general
purpose circuits up to 60 amps.
Sample part #: KLPC-1200
Sample part #: CCMR-15
LLSRK_ID Series CLASS RK1
LLNRK / LLSRK Series CLASS RK1
Littelfuse LLSRK_ID series fuse is the
most advanced Class RK1 fuse available
today providing unparalleled performance
and protection to modern circuits. The
patented Indicator technology provides
instant identification of a blown fuse greatly
enhancing system uptime, while the precision formed short circuit elements virtually
eliminate damage to components from
unexpected electrical faults.
Littelfuse LLNRK and LLSRK
series POWR-PRO fuses provide
superior overload and short circuit protection for general purpose
(service entrance, main, feeder, and
branch) circuits and for circuits with high
inrush currents (motors, transformers,
and solenoids).
Approvals:
• Voltage Rating:
600 VAC / 300 VDC
• Interrupting Rating:
200,000 AC amperes
300,000 AC amperes (Littelfuse self certified)
20,000 DC amperes
• Ampere Range:
1/10 - 600 amperes
• Time Delay
LLSRK_ID replaces competitor’s: LPSRK,
Approvals:
JTD_ID Series CLASS J
CCMR replaces competitor’s: LPCC,ATDR
• Voltage Rating:
250 VAC / 125 VDC (LLNRK)
600 VAC / 300 VDC (LLSRK)
• Interrupting Rating:
300,000 AC / 20,000 DC amperes
• Ampere Range:
1/10 - 600 amperes
• Time Delay
Approvals:
A6DR
Sample part #: LLNRK-100
LDC Series CLASS L
The Littelfuse JTD Indicator fuse
provides visual indication when the
fuse has blown and maximum protection in a compact package. Ideal
for use with motors, transformers,
solenoids, and general purpose circuits with limited space.
• Voltage Rating:
600 VAC (contact factory for DC
voltages)
• Interrupting Rating:
300,000 AC amperes (Littelfuse self-certified)
• Ampere Range:
8/10 - 600 amperes
• Time Delay
Sample part #: JTD-100ID
JTD_ID replaces competitor’s: LPJ, AJT
Approvals:
LLNRK replaces competitor’s: LPNRK, A2DR
LLSRK replaces competitor’s: LPSRK, A6DR
Sample part #: LLSRK-100ID
Approvals:
• Voltage Rating:
600 VAC (contact factory for DC voltages)
• Interrupting Rating:
300,000 AC amperes
• Ampere Range:
2/10 - 60 amperes CC 2/10 - 30A
CD 35 - 60A
• Time Delay
LDC series fuses are the first UL Listed 600
volts AC and DC Class L fuse. They are recommended for UPS protection, DC distribution,
DC variable speed drives, crane rail circuits
and other large DC equipment, mass transit
systems, and general purpose main, feeder,
and branch circuits.
• Voltage Rating:
600 VAC / 600 VDC
• Interrupting Rating:
200,000 AC / 50,000 DC amperes
• Ampere Range:
150 - 2000 amperes
• Time Delay
Approvals:
Sample part #: LDC-1200
3
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
General Purpose Fuses
KLLU Series CLASS L
KLDR/KLKR Series CLASS CC
The general purpose KLLU Class L fuse provides high quality protection at a slightly lower
cost than the POWR-PRO KLPC version. These
fuses are recommended for use in service
switches, switchboard mains and feeders, bolted
pressure contact switches, motor control center
mains, and large motor branch circuits.
Three types of Class CC fuses provide protection for a variety of components. The KLDR
series fuses are designed to withstand the
high magnetizing inrush of transformers. The
KLKR series fuses are used to protect equipment requiring fast response to faults. (Refer to
the POWR-PRO section for information on the
CCMR series motor protection fuses).
• Voltage Rating:
600 VAC (contact factory for DC voltages)
• Interrupting Rating:
200,000 AC amperes
• Ampere Range:
601 - 4000 amperes
• Time Delay
Approvals:
• Voltage Rating:
600 VAC / 300 VDC
• Interrupting Rating:
200,000 AC / 20,000 DC amperes
• Ampere Range:
1/10 - 30 amperes
• Time Delay:
• Fast Acting:
KLKR series
KLDR series
Approvals:
Sample part #: KLLU-1000
KLLU replaces competitor’s: KLU, A4BT
KLKR replaces competitor’s: ATMR, HCLR
KLDR replaces competitor’s: ATQR, HCTR
Sample part #: KLKR-10
KLNR/KLSR Series CLASS RK1
FLNR_ID/FLSR_ID Series CLASS RK5
The KLNR/KLSR series Class RK1 fuses are
extremely current limiting and provide fastacting overload and short-circuit protection.
They are recommended for use with resistance heaters, lighting circuits, and other
non-inductive loads up to 600 amperes.
The Littelfuse FLNR_ID and FLSR_ID
Indicator fuses provide visual indication
when the fuse has blown, reducing down
time and increasing safety. Ideal for use
with all general-purpose circuits, motors,
transformers, solenoids, fluorescent lighting, and all system components with high
inrush currents.
• Voltage Rating:
250 VAC / 125 VDC (KLNR)
600 VAC (KLSR) (contact factory for DC
voltages)
• Interrupting Rating:
200,000 AC / 20,000 DC amperes
• Ampere Range:
1 - 600 amperes
• Fast Acting
Approvals:
• Voltage Rating:
250 VAC / 250 VDC (FLNR_ID)
600 VAC / 300 VDC (FLSR_ID)
• Interrupting Rating:
200,000 AC / 20,000 DC amperes
• Ampere Range:
1/10 - 600 amperes
• Time Delay
Approvals:
Sample part #: KLNR-200
Sample part #: FLSR-200ID
KLNR replaces competitor’s: KTNR, A2KR
KLSR replaces competitor’s: KTSR, A6KR
FLNR_ID replaces competitor’s: FRNR, TRNR
FLSR_ID replaces competitor’s: FRSR, TRS
JLS Series CLASS J
JLLN/JLLS POWR-T Series CLASS T
JLS series fuses provide space-saving,
fast-acting protection for non-inductive
loads. The fuse characteristics are similar
to the KLNR/KLSR series RK1 fuses, but
are much smaller in size. They are also
recommended for use with resistance
heaters, lighting circuits, and other noninductive loads up to 600 amperes.
POWR-GARD Products space saving
POWR-T fuses provide fast-acting
overload and short circuit protection
for non-inductive circuits. These fuses
are recommended to protect individual
electric services and meters, main
switch meter stacks, and similar equipment.
• Voltage Rating: 600 VAC
• Interrupting Rating: 200,000 amperes
• Ampere Range: 1 - 600 amperes
• Fast Acting
Approvals:
Sample part #: JLS-200
JLS replaces competitor’s: JKS, A4J
4
• Voltage Rating:
300 VAC / 125 VDC (110 - 1200
amps) (JLLN)
600 VAC / 300 VDC* (JLLS)
• Interrupting Rating:
200,000 AC / 20,000 DC amperes
• Ampere Range:
1 - 1200 amperes
• Fast Acting
Approvals:
Sample part #: JLLN-100
JLLS-035
JLLN replaces competitor’s: A3T, TJN
JLLS replaces competitor’s: A6T, TJS
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
General Purpose Fuses
NLN/NLS Series CLASS K5
SLC Series CLASS G
NLN and NLS series fuses provide low cost
protection for general purpose feeder and branch
circuits.
The unique design of Littelfuse’s compact
SLC series Class G fuses provide size rejection to insure correct fuse replacement. These
low-cost, space-saving fuses are recommended for use with both non-inductive and
inductive loads with limited inrush currents.
• Voltage Rating:
250 VAC / 250 VDC (NLN)
600 VAC (contact factory for DC voltages (NLS)
• Interrupting Rating:
50,000 AC amperes (contact factory for DC amps)
• Ampere Range:
1 - 600 amperes
• One-Time Fuse
Approvals:
Sample part #: NLS-125
• Voltage Rating:
600 VAC (1/2–20A), 480 VAC (25–60A)
• Interrupting Rating:
100,000 AC amperes
• Ampere Range:
1/2 - 60 amperes
• Medium Time Delay
Approvals:
NLN replaces competitor’s: NON, OT
NLS replaces competitor’s: NOS, OTS
Sample part #: SLC-10
SLC replaces competitor’s: SC, AG
PLUG Fuses Normal Blow & “P” Rated
IDSR Indicator™ Series CLASS RK5
GP – For general purpose circuit protection.
The Littelfuse IDSR Indicator fuse was
designed specifically for DC applications.
It offers 600 volt AC/DC rating
along with visual blown fuse indication.
Ideal for use with general purpose
circuits, motors, transformers, solenoids,
fluorescent lighting, and all system components
with high inrush currents.
TD – Medium time-delay
fuses. Recommended for general
purpose branch-circuit protection.
• Voltage Rating:
125 VAC
• Ampere Range:
15, 20, 25, 30 amperes
• Time Delay or Medium Time Delay
• Voltage Rating:
600 VAC / 600 VDC
• Interrupting Rating:
300,000 AC / 20,000 DC amperes
• Ampere Range:
1/10 - 600 amperes
Approvals:
• Time Delay
Approvals:
Sample part #: GP-15, TD-15
Sample part #: IDSR-125
IDSR replaces competitor’s: FRSR, TRS
Form II Class C, CA/CB
Red Spot Fuse Holders
Form II class C, CA/CB Series fuses are a British dimension
current limiting HRC fuse with very compact dimensions. They
are used for a wide variety of control applications where excellent
current limitation and compact dimensions are required. 'C' Series
fuses can be used on any 600Vac or less circuit.
‘Red Spot’ fuse holders are fully shrouded fuse holder
designed to accept standard Class C or CA type fuses. The
fuses bolt into the handle, which serves as an insertion and
withdrawl tool, as well as covering all live parts when the
fuse is being installed or withdrawn.
• Voltage Rating:
600VAC
• Interrupting Rating:
200kA @ 600VAC
• Ampere Range:
2 - 600 amperes
• Voltage Rating:
600VAC
• Ratings:
20,30,60,100,200,400A
• Connection:
Front,Front/Back, Back
Approvals:
Sample part #: CIA-015
5
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Midget - Electronic
Midget Fuses
Littelfuse offers several series of midget fuses that provide
supplementary protection in such applications as: control
circuits, street lighting, computers, DC circuits, solenoids,
small motors, and transformers. Available in fast-acting
and time-delay versions in a variety of voltage, ampere,
and interrupting ratings.
• Voltage Rating: 32 - 1000 VAC
• Interrupting Rating: 10,000 - 200,000 AC amperes
(10,000 DC amp fuse available)
• Ampere Range: 1/10 - 30 amperes
• Time Delay: FLA, FLM, FLQ, KLQ
BLF series
250 VAC (1/2 - 15 amps)
125 VAC (20 - 30 amps)
1/2 - 30 amps
10,000 AIR
Fast Acting
FLQ series
500 VAC
1/10 - 30 amps
10,000 AIR
Time Delay
BLN series
250 VAC
1 - 30 amps
10,000 AIR
Fast Acting
FLU series
1000 VAC/DC
44/100 - 11 amps
44/100A: 10,000 AIR
11A: 20,000 AIR
BLS series
600 VAC (2/10 - 5 amps)
250 VAC (6 - 10 amps)
2/10 - 10 amps
10,000 AIR
Fast Acting
KLK series
600 VAC
1/10 - 30 amps
200,000* AIR
Fast Acting
FLA series
125 VAC
1/10 - 30 amps
10,000 AIR
Time Delay
• Fast Acting: BLF, BLN, BLS, FLU, KLK, KLKD
Sample part #: KLK-15
FLM series
250 VAC
1/10 - 30 amps
10,000 AIR
Time Delay
Approvals:
KLKD series
600 VAC/VDC
1/10 - 30 amps
100,000 AC / 10,000 DC AIR
Fast Acting
KLQ series
600 VAC
1 - 6 amps
10,000 AIR
Electronic Fuses
Selected Electronic Fuses:
Littelfuse supplies numerous Slo-Blo®,
fast-acting, and indicating fuses, used
in a variety of electrical, electronic, and
communications equipment to provide
superior protection.
312/318 series
3AG Fast Acting
250 VAC (1/100 - 10 amps)
32 VAC (12 - 35 amps)
215 series (Type T)
5x20mm SLO-BLO®
250 VAC (.200 - 10 amps)
313/315 series
3AG SLO-BLO®
250 VAC (1/100 - 8 amps)
32 VAC (10 - 30 amps)
216 series (Type F)
5x20mm Fast Acting
250 VAC (.050 - 10 amps)
Cartridge Type: 312, 313, 215, 216, 217, 218,
314, 326
Axial Lead Type: 318, 315, 324, 325
• Voltage Rating: 32 - 250 VAC
• Interrupting Rating: 35 - 10,000 amperes
• Ampere Range: 1/100 - 30 amperes
• Slo-Blo®: 313, 315, 325, 326, 215, 218,
• Fast Acting: 312, 318, 314, 324, 216, 217
• Indication: 313_ID, 2AG, 229.S
Approvals:
313 Indicating series
3AG Indicating SLO-BLO®
250 VAC (1/2 - 8 amps)
32 VAC (10 amps)
314/324 series
3AB Fast Acting
250 VAC (1/8 - 20 amps)
125 VAC (25 - 30 amps)
217 series (Type F)
5x20mm Fast Acting
250 VAC (.032 - 15 amps)
218 series (Type T)
5x20mm SLO-BLO®
250 VAC (.032 - 15 amps)
326/325 series
3AB SLO-BLO®
250 VAC (1/100 - 20 amps)
125 VAC (25 - 30 amps)
Sample part number: 0313010.vxid
For additional information
see Littelfuse’s Electronic
Designers Guide - EC101.
Sample part number: 0218.400VXP
Fuse Holders & Blocks
Fuse Blocks
Fuse Block Covers
Fuse blocks are available for Class H/K5,
Class R, Class J, Class T, Class G, Class
CC, Midget. Integral blown fuse indication.
Improves safety to personnel by minimizing
contact with energized parts. Available
for Class H/R, J, CD, CC, T and Midget
style fuses up to 100 amps.
• Voltage Rating: 250 & 600VAC
• Ampere Range: 30 - 600A
Approvals:
Replaces competitor’s:
LF Competitor
BLF BAF, OTM
BLN BAN, OTM
BLS BBS
FLA FNA, GFN
FLM FNM, TRM
FLQ
FNQ, ATQ
FLU DMM
KLK KTK, ATM
KLKD KLM
KLQ KTQ
Approval:
6
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Fuse Holders & Bloks
Class CC & Midget
Semiconductor Fuse Blocks
POWR-SAFE “Dead Front” Holders
Littelfuse POWR-SAFE holders provide
optimum protection to personnel.
These DIN-Rail mountable holders are
available in indicating and non-indicating
versions for Class CC, Midget,
LSCR001 & LSCR002 Series
Modular-designed Semiconductor fuse
blocks are designed to accommodate a
wide range of Semiconductor fuses, with
a maximum diameter of 3”. This modular
design greatly reduces inventory requirements. They are sold in pairs.
LSCR001 - 600VAC for use up to 400Amp
LSCR002 - 600VAC for use up to 800Amp
Voltage Rating:600VAC
Amp Rating:30A,
Poles:
1, 2, 3
1LS Series
Littelfuse’s 1LS series modular style
semiconductor fuse blocks accomodate
a wide range of semiconductor
fuses. Blocks are provided in pairs
with fuse mounting hardware.
Approvals:
Sample part #: Midget - LPSM001Z
Class CC - LPSC0002ZID
Voltage: 600VAC
Amperage: 1-600A
Class J 30 & 60Amp Holders
POWR-BLOKS
Class J 30 & 60Amp holders provide
optimum protection to personnel.
These DIN-Rail mountable holders are
available in indicating and non-indicating
versions.
POWR-BLOKS power distribution blocks
offer a safe, convenient way of splicing
cables, providing a fixed junction tap-off
point or splitting primary power into secondary circuits. Lx2xxx-DIN series offers
integral DIN-Rail mount and an optional
hinged safety cover
Voltage Rating:600VAC
Amp Rating:
30, 60A
Poles:
1, 2, 3
Voltage Rating: 600VAC
Material:
Phenolic rated at 150°C and Thermoplastic rated at
125°C (LD1400 and LS1300 series only)
Connector:
Standard: Highly conductive aluminium, tin plated. Rated for copper and aluminium conductors.
Approvals: Approvals:
Sample part #: Class J 30A 31284.000
Class J 60A 31920.000
With Indication
Sample part #: Class J 30A 31932.000
Class J 60A 31923.000
Refer to LD or LFD in the Littelfuse Powr-Gard catalogue
Class J 100, 200 & 400Amp Blocks
Voltage Rating:600VAC
Interupting Rating:200kA
Amp Rating:
100A, 200A & 400Amp
Poles:
3 Pole only
Cover:
Included. Clear lexan
Approvals:
Sample part #: Class J 100A 33306.000
Class J 2000 33307.000
Class J 400A 33308.000
GDB Distribution Block Finger Safe
POWR-BLOKS Global Distribution Blocks add
safety and mounting versatility to our distribution
block solutions. The Global Distribution Blocks are
IP20 finger safe to reduce the risk of contact and
eliminates the need for block or panel covers.
Features and Benefits
•
•
•
•
•
Space saving design
Integrated touch-safe cover to increase safety
IP20 protection rating
Mounts to DIN rail or panels
Reliable brass connections for excellent
continuity in a smaller design
Voltage Rating:600VAC
Amp Rating:
80 - 310A,
Poles:
1, 2, 3
Approvals:
7
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Fuse Holders - Reducers - Pullers - Clamps
Class CC & Midget Fuse holder
Panel Mounted Fuseholders
Fuse Types: Class CC & Midget
Voltage Rating: 600V (CSA/UL) )
1000VDC - Solar
Ampere Rating:30A.
Poles
1, 2, 3
SCCR:
Class CC - 200kA
Midget - 50kA with KLK fuse
Terminal Style:
Box Connector
Wire size:
1 wire #18-#4 AWG or
2 wires #18-#6 AWG
571 series / 572 Snap mount
Panel mount fuseholders are available
for Midget or Class CC fuses.
• Voltage Rating: 600 volts
• Ampere Rating: 30 amperes
Approval:
Sample part # Class CC: 31298.000
We can supply panel mount fuse holders for 2AG, 3AG
&5x20mm fuses. refer to 345 series.
Sample part # Midget: 31110.000
Sample part # Midget Non-Indicating: 31110.000
Sample part # 571-007
Sample part # Midget Indicating: 31130.000
Approvals:
Indicating & non-indicating versions available..
In-Line Watertight Fuseholders
LHFB001 Inline Fuse Holder
The Littelfuse LHFB waterproof inline fuse holder is ideal for harsh
environments. The easy to assemble one-piece molded thermoplastic
body is a bright green color for high visibility. The LHFB holder accepts #12 to #18 gauge wire and features the voltage and amperage
rating molded into the body, along with a wire
strip gauge. Withstands solvents and vibration,
for use with 1/4” x 1-1/4” fuses.
LEB/LEC, LEX/LEY & LET series
Littelfuse’s 600 volt in-line watertight
fuse holders are available in both breakaway and non-breakaway styles, single
and double pole versions, allowing maximum flexibility for any application.
Designed for use with Class CC and
Midget style fuses up to 30 amps. Single
pole solid neutral holders are also available.
• Voltage Rating: 32V
• Ampere: 30A
Approval:
Voltage Rating:600VAC
Amp Rating:
up to 30A,
Interupting Rating:200kA( with Class CC fuse)
Approvals:
Fuse Reducers
POWR-JAW Clip Clamps
Fuse reducers allow smaller size fuses
to be installed in existing fuse clips.
For use with 250 & 600V Class H/R and
J class fuses.
For improving contact between fuse
and clips. Clip clamps minimize poor
clip contact due to loss of spring force.
•
•
•
Simple installation
Reduces inventory requirements
Silver brazed joints for maximum strength
Approval:
Sample part # LCC 5
Approvals:
Fuse Pullers
For safe fuse installation and removal.
Available in 3 sizes and ergonomically
designed for comfort.
Approvals:
8
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Special Purpose Fuses
Littelfuse Special Purpose fuses are designed for specialty applications. They provide protection to lighting systems, battery operated equipment, and service entrance conductors. Available in a wide range of voltage and ampere ratings to accomodate a variety of applications.
Automotive Fuses
Selected Automotive Fuses:
• Voltage Rating: 32V AC/DC
MAXI 299 series
SLO-BLO®
32V AC/DC
20 - 80 amps
• Ampere Range: 1 - 500 amperes
• Slo-Blo®: MAXI™ (299 series), MEGA®, MIDI®
• Fast Acting: ATO® (257 series) MINI® (297 series)
MEGA series
SLO-BLO® Bolt-On
32V AC/DC
60 - 500 amps
MIDI series
SLO-BLO® Bolt-On
32V AC/DC
30 - 200 amps
Approvals:
ATO 257 series
Fast Acting
32V AC/DC
1 - 40 amps
MINI 297 series
Fast Acting
32V AC/DC
2 - 30 amps
Sample part number: MIN-25
Lighting fuses
Forklift & Battery fuses
LGR series fuses
Fast-Acting
300 VAC
1/2 - 15 amps
10,000 AIR
CBO/CCK/CCL series fuses
Fast-acting (CBO)
Time Delay (CCK, CCL)
32 VDC (CBO), 125 VDC (CCK, CCL)
1 - 300 amps
LMF series fuses
Time-Delay
300 VAC
3/10 - 10 amps
10,000 AIR
CNL/CNN series fuses
Fast-acting (CNL)
Very fast-acting (CNN)
32 VDC (CNL), 48 VDC (CNN)
10 - 800 amps
Approvals:
Multimeter Fuses
Daito fuses
The Littelfuse FLU series is designed specifically for the protection of multimeters.
The 1000 VAC/VDC rating also makes the
FLU ideal for a variety of other applications
• Voltage Rating:
1000VAC
• Interrupting Rating:
FLU.440 10kA
FLU 011 20kA
• Ampere Range:
FLU44 - 1Amp
FLU11 - 15Amp
DAITO
Fuse Types: MP, SMP/SDP,GP,P3,P4,
P4H,P4L,SP3,SP4,HP
Voltage Rating: 60 -250VAC/DC
Ampere Rating: 0.32A - 15A
Interupting Rating: Up to 10kAIR
Sample part #: FLU44
replaces competitor’s: FSM, DMM
7017240 - 6mm x 32mm 1000VAC/VDC
•
•
•
•
•
•
Daito fuses are frequently used in machine
tools, CNC and robotic equipment, telecommunications and equipment from Fanuc,
Yaskawa, Toshiba and NEC. They are AC/
DC rated fuses with an integral alarm contact
that is closed on fuse operation, signalling
that the fuse has operated. They are a unique
size and cannot be interchanged with other
fuse types.
1000VAC/DC UL
Ultra fast acting (FF)
0.315, 0.5, 0.8, 1, 1.6, 2A
Use in test leads
Designed for long life in severe condition
Shock & Vibration tested to 30G series
Approvals:
9
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Telecomm Fuses
Specifically designed for use with
Telecommunications circuits. Littelfuse
Telecom products provide reliable protection
to sensitive DC power distribution
systems. The compact design and
multiple mounting configurations allow
flexibility for the designer.
L17T series fuses
170 VDC
70 - 1200 amps
100,000 amps I.R.
70 series alarm fuses
125 VAC, 300 VDC
100ma - 10 amps
1000 amps I.R.
TLN series fuses
170 VDC
1 - 600 amps
100,000 amps I.R.
481 series alarm fuses
125V AC/DC
18/100 - 20 amps
1000 amps I.R.
TLS series fuses
170 VDC
1 - 125 amps
100,000 amps I.R.
LTFD series disconnect switches
60-145 VDC
1 - 1200 amps
Approvals:
TFCF 600V Capacitor fuses
TCCF 2.4/4.8kV Capacitor fuses
TFCF fuses are current limiting fuses
designed for the unit fusing of 600v (or
less) capacitors. They are threaded for
M12 metric capacitor bushings, but
may be adapted to other thread patterns
with the adapters shown below.
TCCF fuses are current-limiting, partial
range fuse designed for the individual unit
fusing of three phase capacitors in metal
enclosed equipments. They are non-indicating and non-disconnecting
Voltage Rating: 600VAC
Ampere Rating: 10, 15, 20, 25, 30, 35, 40, 50, 60, 70,
80, 90, 100, 125, 150, 175, 200A
Interrupting Rating: 200kA
Approval:
Sample part # TFCF-125
•
Direct stud-mounting on 1/2-13 capacitor studs
eliminates seperate holder.
•
•
replaces Westinghouse, GE and some McGraw fuses
Adapters are available below to convert to other stud threads
Voltage Rating: Ampere Rating: IR Rating: 2.4kV: 100A &125A
4.8kV: 25A - 75A
25, 50,75,100,125
50kA
Sample part # TCCF-125
Metric/UNC Adapters
Stud
Material - unplated free cutting brass
Receptacle
Thread patterns
Stud
Receptacle
P/N
3/8-16uncM12S38-R12
1/2-13uncM12S13-R12
1/2-13uncM16S13-R16
M123/8-16uncS12-R38
M121/2-13uncS12-R13
M161/2-13uncS16-R13
M10M12S10-R12
SIBA Capacitor fuses
Siba capacitor fuses offer increased voltage and amp ratings for larger capacitor
applications. They feature ceramic bodies
and higher interupting ratings. Imperial UNC
thread pattern is standard. Metric styles
also available.
Voltage Rating: 4.8kV, & 7.2kV, 15.5kV
Ampere Rating: 6.3A - 200Amp
Interrupting Rating: 63kA
10
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Semiconductor Fuses
Littelfuse Semiconductor fuses are very fast acting fuses designed
specifically for the protection of diodes, thyristors, triacs, and other
solid-state power semiconductor devices. These fuses are used in
power electronic applications including variable speed drives,
power rectifiers, UPS systems, and DC power supplies. They can
be used wherever extremely fast-acting, current-limiting fuses are
needed to provide superior protection against the potentially damaging
effects of short circuit currents.
The extensive line of Littelfuse Semiconductor fuses includes the
traditional round body fuses, enhanced state-of-the-art round body
fuses, and North American style square body fuses. Available ratings
range from 150 to 1300 volts up to 6000 amps.
• Voltage Rating:
150-1300 VAC, 150-1000VDC
• Interrupting Rating:
100,000-200,000 AC amperes
• Ampere Range:
1 - 6000 amperes
Sample part number: LA50QS250-4
LA15QS Series
Voltage Rating: 150V AC/DC
Interrupting Rating: 100,000 amperes
Ampere Range: 1 - 6000 amperes
LA70QS French Cylindrical Series
Voltage Rating: 690 VAC/700 VDC
Interrupting Rating: 200,000 amperes
Ampere Range: 10 - 100 amperes
LA30QS Series
Voltage Rating: 300V AC/DC
Interrupting Rating: 200,000 amperes
Ampere Range: 35 - 4500 amperes
LA100P Series
Voltage Rating: 1000 VAC/750 VDC
Interrupting Rating: 100,000 amperes
Ampere Range: 15 - 1000 amperes
LA50QS Series
Voltage Rating: 500V AC/DC
Interrupting Rating: 200,000 amperes
Ampere Range: 35 - 1200 amperes
LA120X Series
Voltage Rating: 1200 VAC/1000 VDC
Interrupting Rating: 100,000 amperes
Ampere Range: 1/2 - 30 amperes
LA60Q Series
Voltage Rating: 600 VAC
Interrupting Rating: 200,000 amperes
Ampere Range: 5 - 40 amperes
LA070URD Series
Voltage Rating: 700V AC/DC
Interrupting Rating: 200,000 amperes
Ampere Range: 40 - 2500 amperes
LA60X Series
Voltage Rating: 600 VAC
Interrupting Rating: 100,000 amperes
Ampere Range: 70 - 2000 amperes
LA130URD Series
Voltage Rating: 700V AC/DC
Interrupting Rating: 100,000 amperes
Ampere Range: 40 - 2500 amperes
LA70QS Series
Voltage Rating: 700V AC/DC
Interrupting Rating: 200,000 amperes
Ampere Range: 35 - 800 amperes
Approval:
L15S Series
Voltage Rating: 150V AC/DC (1-60A), 150 VAC
(70-1000A), 100 VDC (70-1000A)
Interrupting Rating: 200,000 amperes
Ampere Range: 1 - 1000 amperes
L25S Series
Voltage Rating: 250V AC/DC (1-200A), 250 VAC
(225-800A), 200 VDC (225-800A)
Interrupting Rating: 200,000 amperes
Ampere Range: 1 - 800 amperes
L50S Series
Voltage Rating: 500 VAC/450 VDC
Interrupting Rating: 200,000 amperes
Ampere Range: 10 - 1200 amperes
L60S Series
Voltage Rating: 600 VAC
Interrupting Rating: 200,000 amperes
Ampere Range: 1 - 800 amperes
KLC Series (for replacement only)
Voltage Rating: 600 VAC
Interrupting Rating: 200,000 amperes
Ampere Range: 1 - 800 amperes
L70S Series
Voltage Rating: 700 VAC/650 VDC
Interrupting Rating: 200,000 amperes
Ampere Range: 10 - 1200 amperes
Approval:
Approvals:
11
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Semiconductor Fuses
Cylindrical ultra-rapid
British semiconductor fuses
(BS88)
These fuses are British dimension, ultra fast
acting types for the protection of semiconductor devices such as diodes, rectifiers,
SCR's, thyristors, soft starts or inverters.
•
•
•
•
•
•
High interrupting rating 100 kA
Voltage rating AC 240 V – AC 700 V
Protection of Power Semiconductors
according to IEC 60269-4
Complies with BS 88 Standard
with or without striker for microswitch
operation.
Class aR 5 A – 900 A according to
IEC 60269-4
Eurofuses Bottle and NH
These fuses are available in 6 different sizes. They can be fitted
with or without built-in striker pin for fuse blown indication or
operation of microswitches.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Approval:
Standard: IEC 60269-1 and -4
DIN VDE 0636-23
UL 248-13
Class: gR/aR/gRL
Current ratings: 125 mA – 200 A
Size and voltage rating:
5 x 20 mm: AC 250 V
6.35 x 32 mm: AC 500 – 1000 V
10 x 38 mm: AC 600 – 1000 V
14 x 51 mm: AC 500/600V – 690/700 V
22 x 58 mm: AC 500/600 V – 690/700 V
27 x 60 mm: AC 660 V – 1000 V
Fuse-Bases / Fuse-Clips and Accessories are available
Metric Ferrule Fuses
European fuses are used in imported equipment,
or in projects destined overseas. Eurofuses are
available in two broad categories - bottle fuses
and square body fuses. Both categories have
many different types within the group. All European fuses are current and energy limiting.
Voltage Rating: 250,380, 450 500, 600,
660, 690, 700, 1000VAC
Ampere Rating: 0.032A - 100A
Speed: aM, FF, F, gL, gR, T
Sizes: 5x20mm, 6x32mm, 8x32mm, 10x38mm,
14x51mm, 22x58mm
Operating classifications:
Approvals:
gL, gG, General purpose characteristic for distribution
aM Back up characteristic for motor circuits
gR Ultrafast characteristic for semiconductor circuits.
Usually found in imported equipment. Available in the following
characteristics;
F = Fast - overload and short circuit.
M = medium - overload and short circuit.
FF = Ultrafast - short circuit only.
gL = General purpose-overload and short circuit.
aM = Motor circuit - short circuit only.
gR = Ultrafast-overload and short circuit.
gRL= Branch rated & short circuit.
Voltage Rating: 380 - 690V
Ampere Rating: 2 - 750A
Interrupting Rating: 100 - 120kA
Speed: aR, gG, gR, gRL
Sizes: 00, 000, 1, 2, 3
Not all Ferrule fuses carry the CSA or cRU. For additional information
see Fusetek Specialty Catalogue or visit www.fusetek.com
Standards: IEC, CE
URS Square Body Rectifier Fuses
DIN 43625 fuses come in 5 case sizes
- 000, 00, 1, 2, & 3. Within these case
sizes - UR fuses come in two voltage
ratings (700 & 1400Vac) and two fixing
centers (80 and 110mm). These fuses
can easily be fitted with a microswitch
for remote annunciation, or may be used
without this option.
Voltage Rating: Ampere Rating: Interrupting Rating: Sizes:
Standards: Matching fuse bases available
12
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
700 - 1400VAC
50 - 3000A
200kA
1, 2, 3 and 4
Solar
SPFR series
KLKD series
Fast-acting, high-interrupting capacity,
current-limiting type fuse. Especially suited
for DC control circuits and Solar string
fusing.
•
•
•
•
ALTERNATIVE POWER SOLUTIONS
600VAC/DC
CSA/UL Approved
1 - 30A
50kAIR DC
The SPFR series was designed to meet
the growing needs of the solar industry with
higher amperage and voltage requirements.
It was developed specifically for solar
applications ranging from 250 A to 400 A.
ALTERNATIVE POWER SOLUTIONS
Voltage Rating: 1000 VDC
Ampere Ratings: 250, 300, 350 and 400 A
Interrupting Rating: 10kA
Fuse Type: Fast-Acting
Approvals:
Sample part number: KLKD-15
Approvals:
Sample part number: SPFR-200
SPF series
LPSM / LPSC
The SPF Solar Protection Fuse series has
been specifically designed for the protection of photovoltaic (PV) systems.
This family of Midget style fuses (10 x 38
mm) can safely protect PV modules and
conductors from reverse overcurrent
conditions.
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
Voltage Rating: 600 VAC/DC
Ampere Rating: 30 A
Interrupting Rating: 200 kA (Class CC)
100 kA (Midget)
Terminal Type: Pressure plate
Wire Range: #8–#14 CU
Poles: 1, 2, 3
Voltage Rating: 1000 VDC
Amperage Rating: 1, 2, 3, 4, 5, 6, 8, 10,
12, 15, 20, 25, 30
Max. Interrupting Rating: 20 kA
Approvals:
Approvals:
Sample part number: SPF030
Sample part #: Midget - LPSM001Z
Class CC - LPSC0002ZID
LPHV Series 1000VDC POWR-SAFE “Dead Front” Holders
SPFJ series
The SPFJ series is the smallest 1000 VDC
70-450 A photovoltaic fuse available in
the market. The SPFJ series is manufactured in Class J case sizes that allows for
both fuse holder and busbar mounting
configuration.
Voltage Rating 1000 VDC
600 VAC (125-450 A)
Amperage Rating 70, 80, 90, 100, 125, 160, 200,
250, 300, 350, 400, 450
Interrupting Rating AC: 200 kAIC (125-450 A)
DC: 70-200 A: 20 kAIC
250-400 A: 10 kAIC
450 A: 20 kAIC
Approvals:
Littelfuse POWR-SAFE Dead Front holders
provide optimum protection to personnel for
Class CC and Midget-Style fuses.
ALTERNATIVE POWER SOLUTIONS
The LPHV midget fuse holder series is a
touch-safe design providing protection to
personnel when installing and removing fuses.
The compact fuse holder mounts quickly onto
35 mm din rail decreasing panel layout and
assembly time. It has been self-certified to
stringent Littelfuse standards for applications
upwards of 1000VDC when used with the Littelfuse SPF or FLU midget fuse series.
ALTERNATIVE POWER SOLUTIONS
Voltage Rating: 1000 VDC
Amperage Rating: 30 amperes
Approval: Self-certified with SPF & FLU fuses
Wire Range: #6 - #14 CU 75°C
Terminal Type: Pressure Plate
Poles: 1, 2, 3, 4
Approvals:
Sample part number: SPFJ100
13
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Solar
LFJ1000 Solar Series
5106304.DC 1000V 10mm x 38mm Fuse Holder
The LFJ1000 series fuse block is specifically designed for the Littelfuse SPFJ
1000 V Solar Fuse. It meets UL electrical
requirements, is available in multiple amperages, and comes in a variety of fuse
mounting and termination configurations;
fuse clip to box lug, fuse stud to wire stud
and fuse clip to wire stud.
ALTERNATIVE POWER SOLUTIONS
•
•
•
•
•
30A / 1000VDC
Din-Rail mountable
Non Indicating
1 & 2 Pole
Gangable
ALTERNATIVE POWER SOLUTIONS
Approvals:
Voltage Ratings: 1000 VDC
Ampere Ratings: 200, 400, 450 A
Flammability Rating: UL94 V-0
Termination Type: Box Lug or Stud Mount
Approvals:
PV NH1 2002820
7017240 - 6mm x 32mm 1000VAC/VDC
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
•
•
•
•
•
•
1000VAC/DC UL
Ultra fast acting (FF)
0.315, 0.5, 0.8, 1, 1.6, 2A
Use in control circuits
Designed for long life in severe conditions
Shock & Vibration tested to 30G series
•
•
•
•
•
1000VDC
Size NH1
50 - 200A
Larger ampacities
Indicating /Non indicating versions
Approval:
Sample part # 7017240-00.315
Sample part # 2002820-200
5019906 - 10mm x 38mm 1000VAC/DC
Overview of standard PV products Available
ALTERNATIVE POWER SOLUTIONS
•
•
•
•
•
•
1000VAC/DC
1, 2, 4, 6, 8, 10, 12, 16A
Max. I.R 38kA(L/R=1ms)
Ultra fast Acting
Standard Midget format
Use with 1000V rated holders and in
DMM’s
DIMENSIONS
RATED
VOLTAGE
RATED
CURRENT
MM/SIZE
V
A
6.3 X 32
400VDC
6.3 - 20
10 X 38
1000VDC
0.5 - 20 **
14 X 51
1000VDC
10 - 25
10 X 51
1100VDC
6 - 20
Approval:
10 X 85
1100VDC
2 - 20
NH1
1100VDC
50 - 200*
Sample part # 5019906-10
NH3
1100VDC
50 - 400
20 X 127
1500VDC
2 - 63
14
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
*
**
UL pending
cUL rec.
Solar
DC Isolator switches
Our Solar Isolator range has been specifically developed as a True DC load-break switch
for DC applications up to 1000VDC
Voltage Rating: Current: Poles: Mount : Lockable: 1000 VDC
16A - 400A
2 - 8 poles
Panel, Enclosed, Base mount,
Door interlock
Yes
Approvals:
UL, IEC
ALTERNATIVE POWER SOLUTIONS
Available in either Lever Actuator, Rotary Actuator.
SolarCube
The IMO Solar Cube is a PLC based controller for positioning & controlling solar tracking arrays. It has the flexibility to adapt to
any installation and features integrated data logging capability for energy reporting.
•
•
•
•
•
•
•
•
ALTERNATIVE POWER SOLUTIONS
3.5” Monochrome Touch Screen
5 Pre-programmed function keys
Built-in sun positioning algorithm
3D Compass input for accurate positioning.
Automatic location and clock updates with optional GPS module
MicroSD card for data logging
GPRS and Ethernet Remote Access options available
Single array & 4 array
Those are just some of the features of the SolarCube from IMO
Approval:
Easyliner
The new AMBUS ® EasyLiner is a cost saving solution to building positive solar combiner assemblies. Fuse holders mount directly
to busbar, insuring good connection, cool running and simplifies assembly up to 40 strings.
ALTERNATIVE POWER SOLUTIONS
Advantages
•
Time and cost savings
•
Fuse holders mount directly to the busbar, simplifying system
•
Minimizes assembly and wiring
•
System uses standard bus bars, terminals and supports
Fuse holder part No.
31572 - mounts on 20x5/10mm
31570 - mounts on 30x5/10mm
Voltage Rating: Ampere Rating: Max Current: 1000VDC
30A
630A
15
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
High Voltage
HV DIN fuses.
A complete line of DIN HV fuses are partialrange high voltage current-limiting fuses for
use in distribution circuits from 2.3 - 38kV.
• 3/7.2kV - 6.3 - 500A
• 6/12kV - 6.3 -315A
• 10/17.5kV - 6.3 - 400A
• 20/27.6kV - 6.3 - 125A
• 20/36kV - 6.3 – 200A
• 38.5kV - 6.3 - 63A
E-Rated General Purpose Fuses
“E-rated” fuses are general purpose fuses that protect against
both low and high values of fault current. These fuses have timecurrent characteristics designed to provide current limiting protection
for power transformers, power centers, feeder circuits and unit
substations.
E-Rated Potential Transformer Fuses
Potential Transformer (PT) fuses are current limiting fuses with
high interrupting ratings designed for the protection of potential
transformers.
Medium Voltage Fuses
Littelfuse Medium Voltage fuses are available with
conventional ferrule type, clip lock and bolt-in
mounting configurations for flexibility in a variety
of applications.
E-Rated General Purpose Fuses
• 2.75kV - 10E – 450E
• 5.5kV - 10E – 600E
• 8.25kV - 10E – 400E
• 15.5kV - 10E – 300E
• 25.8kV - 15E – 100E
• 38.0kV - 3E – 80E
Sample part # 15E1C8.25
R-Rated Back-Up Protection Fuses
“R-rated” fuses are designed to protect against only high values of
fault currents and should be applied only as back-up protection.
They provide required short-circuit protection for medium voltage
motors, motor controllers, and associated circuitry. However, they
must be used in series with other devices, such as motor overload
relays, to achieve both overload and short circuit protection.
Capacitor fuses
Capacitor fuses are current-limiting, partial range
fuses designed for the individual unit fusing of three
phase capacitors in metal enclosed equipment.
They are non-indicating and non-disconnecting.
Voltage Rating: 4.8kV: 25A - 75A 2.4kV: 100A -125A
R rated Motor Fuses
R rated fuses are current and energy limiting fuses
intended for the backup protection of medium voltage motor control. They are nonventing. They have
integral striker/indicators and have standardized
dimensions compatible with today’s 5.5kV motor
control gear. They are fully interchangeable with
other manufacturers’ fuses of the same type
and rating.
R-Rated Back-up Protection
•
2.75kV - 2R – 24R
•
5.5kV - 2R – 38R
•
8.25kV - 2R – 36R
Ampere Rating: 25, 50, 75, 100, 125A
Interrupting Rating: 50kA
m.b.c.: 200% of rating
Sample part number: TCCF-050
Note: Add "B" suffix for M12 Boss at one end &1/2-13 boss
at other end.
Other Capacitor fuses available from
7.2kV,12kV, 13.8kV, 17.5kV & 25.8kV
Sample part # MVR5/09R-DI
load-break switches & Grounding switches
LDTP Series
PT FUSES
PT series fuses are current limiting, nonindicating, partial range HRC fuses available in
a variety of voltage, amperage and interrupting
ratings. FC & NPT series are North American
dimensioned PT fuses and provide equals to
Westinghouse and CGE. BPT series are British dimensioned PT fuses and offer equals to
GEC, Brush, CCL, and EMP.
Voltage Rating:
7.2kV, 17.5kV, 25.8kV, 38kV
Rated Current:
400A & 600A
For Fuse sizes:
192mm, 292mm, 442mm,537mm
Operator position:
left or right
North American Dims
Available with or without Auxiliary contacts for control and
signalization
Fuse Diameter:
Voltage Rating:
Ampere Rating:
Interupting Rating:
Sample part # FC467-1E
13/16”, 1”, 1-9/16” & 2”
625VAC - 25.8kV
0.5E - 25E
32kA - 40kA
DEP Series of grounding switches (3pole)
Max voltage:
7.2kV, 17.5kV, 25.8kV, 38kV
Short time Current:
25kA & 38.1kA
Operator position:
left or right
Available with or without Auxiliary contacts for control and signalization
16
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
High Voltage Accessories
HV Bases
HV Microswitch 3100110
Medium voltage bases
Fusetek can supply single or 3 pole bases
for most of the medium voltage fuses we
supply.
Need more than visual indication? Our remote
mount microswitch is good for all systems up to
38kV. The insulated Bowden cable is actuated
by the fuse striker which then actuates the
microswitch at the other end. Includes mounting
bracket at both ends.
Rated Voltage: 7.2 - 38kV
EPOXY Insulators
DELLE Adapter Kits
We carry a range of epoxy resin insulators
from 7.2kV to 38kV. Tapped brass inserts
can accomodate a wide range of
equipment.
Delle fuses are now obsolete, but there is a large
installed base of fuses that need replacing. Our
adapter kits replace the existing Delle live parts
and convert the Delle fixing centers to accept a
modern, easily obtainable DIN HV fuse.
Part
Rated Voltage
DWA-07A
7.2kV
DWA-15A
17.5kV
DWA-20A
25.8kV
DWA-30A
38kV
KF22-12 HV Indicator
Direct bolt-on replacement.
Upgrades to modern DIN fuses.
High pressure clips, hardware and conversion plates
Fuse Clips
Never have to open a live HV cabinet again
to check for voltage!. Bolt these line indicators
onto any convenient live part and the high
brightness LED cluster will flash to indicate
presence of voltage.
Rated for 2.5kV - 38kV
•
•
•
We carry Fuse Clips to fit all our HV fuses.
Always in stock
Size:
Size:
Amp Rating:
1” to 3” Reinforced spring clip
45mm Spring clip
45mm Spring clip with hot stick loop
60A, 200A, 400A, 600A, 1200A
17
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Panel Building Products
CL Wire Retainers
T1 & T1E Series Duct
•
•
•
•
•
•
Retains wires during
installation. Provides additional strain
relief of fingers. Eliminates bulging against
sidewall.
4 Styles of Duct
35 duct sizes
40+ components
& Accessories
No cover charge. Each
length comes with cover.
2 meter length invoiced at
6 feet. Thats an extra 9%
of duct free!
Available in white, grey, blue and black
Approvals:
Cable Ties & Stickies
•
•
MATERIAL: 6/6 Nylon
COLOR: NATURAL - BLACK
Length: 4.1” - 28”
Tensile Strength(lbs):18, 40, 50, 120
Max. Bundle Dia.: 22 - 203mm
RoHS
Cable mounts that STICK!
Part Number Pack Qty*
ICM-75100
ICM-100100
Dinosaur Flexible Duct
ICB Enclosures
IBOCO Enclosures are an architecturally
appealing enclosure designed for use as
instrumentation housings, electrical junction
boxes, terminal wiring boxes and as housings for electrical controls. The integral DIN
rail makes mounting components a snap.
Dinosaur Duct is a unique product offering from IBOCO that is a flexible,
resilient and efficient harnessing
solution to your bundling needs. For
wiring to cabinet doors, from control
panels and for electronic equipment.
•
•
•
•
•
Spiralite Wrap & Braiding
•
•
•
•
•
4 pole to 54 poles
Transparent Cover
Optional lock
Mount any standard DIN rail device
IP65 / NEMA 4
Approvals: Pending
Available in 4 sizes.
Natural / White
Polyethylene Natural (P)
Polyethylene self extinguising (PA)
Braided Sleeving available in 5 sizes.
I-Flex liquid-tight non metallic conduit
Unibox Enclosures
IBOCO®'s straight and right angle (90º) liquid-tight non-metallic connectors are designed to fit with the company's line of flexible liquidtight PVC tubing to ensure leak-proof integrity on motors, processing
equipment, pumps, etc
Uniboxes are ideal for housing
electronic and electro-mechanical
components as well as terminal
blocks and industrial equipment.
Available in light grey or black. IP-65 Rating
•
•
•
•
•
•
•
Approvals:
Approvals:
•
•
•
•
•
A liquid-tight environmental seal
Quick re-entry for cable repair or rerouting
recognition
certified
IP 65-rated for watertight applications
IP65
Manufactured in polycarbonate
Plain side walls
Colour RAL7035 v- light gray
Pre moulded fixing points in base
14 sizes
Back plate or DIN rail mount options.
18
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Panel Building Products
Thermal/Magnetic Circuit Breakers
Busbar System
Their current limiting design and high interrupt/
voltage ratings make them vastly superior to
residential or ‘push-to-reset’ MCBs.
The Wohner 60mm system is a modular busbar system that allows an unprecedented degree of design flexibility.
The 60mm busbar centers allow large
ampacities to be distributed in a very
compact space while maintaining high
short circuit current ratings (SCCRs).
JTECUL
Voltage Rating: 277/480VAC
Amperage Rating: 0.5 - 63A
Trip Curve: B, C, D
Poles: 1, 2, 3
E243696
JTECUL
JTEC489
Voltage Rating: 277/480VAC
Amperage Rating: 0.5 - 63A
Trip Curve: B, C, D & K
Poles: 1, 2, 3
Note: 35-63A 240VAC
Voltage Rating:
Amp Rating:
600VAC (N.A.) 690VAC (IEC)
Busbar dependant 150 - 1800A in 7 sizes
SCCR rating:
Unprotected - 18-30kA
MCB protected - 25-65kA
Fuse protected - 100Ka
Touch Protection: IP20
JTEC489
Approval:
LEDTEC 22mm Pilot Lights
JTEC Accessories
The last pilot light you will ever replace. 100,000 hours, super bright,
power saving and immune to heat and vibration.
• Auxiliary Contacts
Voltage rating: 12vac/dc,24vac/dc, 48vac/dc,
110/120vac, 110/120vdc, 230Vac
Colours: Red, Green, Amber, Blue, White
• Shunt trip
• Neutral pole
Sample Part Number: LEDTECR110/120Vac
• Undervoltage release
• Very bright Multi Chip LED bulb
• Standard 22mm format
• Direct wire to integral rear terminals
Catalogue number example
• Shock resistant
• 1 piece design, LEDTEC
R
120Vac/dc
one part number
LEDTEC Series R=Red
12Vdc
• Oil and dust tight
G=Green
24Vac/dc
• IP65
A= Amber
48Vac/dc
B=Blue
110Vac/dc
• 20% voltage tolerance
W=White
230Vac/dc
• Safety lockout device
• Busbar
• Busbar connector terminal.
• Busbar cut end-cap.
• Front Mount Panel Adapter
• Panel mount adapter clip.
Approval:
BCR-AX Adapter ring
BA9S LED’s
Going from 30mm to 22mm takes only a few
seconds with the BCR-AX adapter ring.
BA9S LED’s are high brightness LED bulbs with
industry standard BA9S bayonet bases. They will
fit into any standard 22mm or 30mm pilot light that
accepts BA9S bulbs. Their solid state design and
long life makes incandescent bulbs a thing of the
past.
• Steel plated backing ring with anti-rotation notch
• Fits panel thickness up to 14 gauge
• No tools required
• Available in black plastic.
LED BA9s are available in industry standard colors
and voltage ratings and allows LED upgrade from
the front of the panel without having to open the
door.
Catalogue number example
BA9SLED
BA9SLED Series
120
6Vac/dc
12Vac/dc
24Vac/dc
120Vac/dc
220Vac/dc
R
R=Red
G=Green
A= Amber
B=Blue
W=White
19
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Panel Building Products
Contactors & Overloads
Industrial Power Relays
MC Series
IMO offers a comprehensive Industrial power
relay line.
•
•
•
•
•
•
10A - 1200A AC3 / 4kW - 680kW
DIN-rail mounting up to AC3 74A
Coils: 24, 120, 230, 240, 575V
50/60Hz
DC coils available
Miniature breaker available. Refer to MB series
RS series - General purpose
Approvals:
2PCO and 3PCO
Voltage Rating:
Rated current:
Max. Switching: MCOR Series Overload Relay (thermal)
HY series - Miniature General purpose
Temperature compensated
Trip and alarm contacts
3PCO & 4PCO
Voltage Rating:
Rated current: Max. Switching:
Amp Range: 0.12 - 74A
12, 24, 110 &230VAC
10A
250AC/30VDC
12, 24, 110 &230VAC, 12, 24, 48, 110VDC
5A (4PCO) 7A Amp (2CPO & 3CPO) 2PCO,
250AC/24DC
Approvals:
For the complete line of Power relays and subminiature relays from IMO
Please visit www.fusetek.com and click on IMO
Starters
Timers
MU Manual Series
•
Amp Range: 0.16 - 25A
•
Overload protection
•
Short circuit protection
•
Overload built in to start
Accessories - Aux. Contacts, molded enclosure(IP55)
Locking bracket, Mushroom stop button
IMO's comprehensive range of 22.5mm DIN
Rail Timers and Panel/plug-in timers delivers
up-to-the-minute technology. Ultra compact
design makes installation easy, even in the
tightest of panels.
DOL enclosed Magnetic Starter
•
up to 7.5kW
•
IP65
•
Start Stop buttons
•
Pre-wired to accept overload
DOL Type:
DOL_10 & DOL_18
Standard coils: Same as MC series
Ratings AC3 /400V: 10A(DOL_10) 18A(DOL_18)
•
•
•
•
•
•
•
•
48 DIN panel mount/plug in range
22.5mm DIN rail mount range
On delay
Off/true off delay
Recycling
Star delta
Multifunction
12 - 240VAC/DC options
TA8 Series - Plugin
TD Series - DIN Rail mount
Approvals:
69 Series Isolators 600VAC
Sockets
•
•
•
•
•
•
IMO offers a comprehensive line of sockets.
They are available in panel mount or DIN
Rail Mount
3 and 4 pole
Load break 20 - 125A
Red/yellow or black handles
3 pad lock positions
Lightweight ext. shafts 100-400mm
Side mount auxiliary contacts
Popular Sockets
Socket Part
PE69 - IP65 enclosed
LB69 - Base mount door interlock
PM69 - Front panel mount
DM69 - Direct handle base mount
Approval:
Relay
Rated VAC
Pins
Rated current
SRR8
300
8
15A (per pole)
SRR11
300
11
15A (per pole)
SRN2-S
300
12
12A (per pole)
SRSI
250VAC
Approvals:
20
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
6A (per pole)
Panel Building Products
Pilot devices & Push buttons and Cam switches
Limit Switches & Safety Limit switches
A full line of
IMO Limit Switches and safety limit switches are being installed
and used daily in every type of industrial machinery, in every
type of weather condition and in many different industry sectors,
including Wood, Metal, Plastic, Automotive, Packaging and Lifting.
•
•
•
•
•
•
•
•
•
Push Buttons
Emergency stop
Cam switches
Key operated rotary switches
Illuminated push buttons
Illuminated Operators
Double push buttons
Contact blocks and lamp holders
Label holder, legend plates, actuator caps
22mm
This miniature block sensor with diffuse,
background suppression, retro reflective or
through-beam capability is ideal for a wide
range of industrial applications where space
is at a premium.
• Thru Beam.
• Diffuse (with Background Suppression).
• Reflective photo-electric sensors.
• Simple push to teach with a variety of light sources
(Laser, Infra-Red, Visible Red).
• Light ON/Dark ON selectable.
Proximity Switches
Capacitive & Inductive
Wide operating voltage 20-264VAC 50/60Hz
LED operation indicator
Shielded and unshielded models
IP67 nickel-plated brass housing
m8, m12, m18, m30
m12 plug or integral cable
IMO terminals are made of carefully
selected standard materials. Insulating
materials, clamping metals and conducting
metals are subjected to strict quality control
as required by stringent international
standards.
2.5mm to 240mm
polyamide 6.6 material
-40c to +100C
screw and screwless option
8 colour options
•
•
•
•
10A 500VAC/600VDC rated
Double-break contacts with electrically separate NO
and NC circuits
Wide range of actuators
Single and triple cable entry models
Removable contact block for ease of wiring
Turret head position rotatable in 90 degree increments
Metal or plastic housing options
IP66 according
Rope Operated Stop Switches FD
Rope operated safety switches for the protection of exposed machinery.
•
•
•
•
•
•
•
Lockout mechanism isolates safety
contacts until manually reset
12 and 35 meter rope length models
Indicator of correct rope tension
Fail-safe in the event of slack or broken wire rope
Heavy duty die-cast metal alloy housing
Single and triple conduit entry models
IP66
Micro Switches MK Series
DIN Rail Terminals
•
•
•
•
•
Features common to both Standard and Heavy duty
•
•
•
•
QB Photo-Electric Sensors
•
•
•
•
•
•
•
Standard Heavy Duty Limit Switches FD/FP/FL
Compact Heavy Duty Limit Switches FM/FR/FZ/FX
General purpose microswitches for
heavier duty applications.
•
•
•
•
•
•
•
•
•
High precision snap action mechanism
16A 250V AC resistive rating (Ith)
Wide range of actuator styles
Screw terminals with self lifting plate
10 million mechanical operation cycles
Protection degree IP20, IP40 or IP65
Versions with positive opening
Mechanically interchangeable with previous
products (see cross reference section)
21
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Automation
DPS Power Supplies
i3 Controllers
IMO's DPS range of AC/DC Din Rail mountable
power supplies have been designed especially
for the Control & Automation Market. Offering
the benefits of slim lines, universal input, AC/DC
operation and the security of a 3 year warranty.
IMO's i3 line of controller offers a unique
solution since it is both a PLC and HMI
combined in one device. It is also, small,
very powerful and has many unique connectivity features. One such feature is the
GRPS modem option, which is ideal for
applications where the controller needs to
be accessed remotely.
•
•
•
•
•
High efficiency
Short circuit protection
internal input filtering
PFC function available
Parallel function available
Available units
•
i3A - Mono 128 x 64
•
i3B - Mono 160x128 touch screen
•
i3C - Colour 320 x 240 touch screen
•
i3C - Mini colour 320x240 touch screen
•
i3D - Colour 640x480 touch screen
•
i3H - Graphic based 800x600 touch screen
•
All units come with free software and updates
Universal input voltage range:
85V - 265VAC
Standard output:
24VDC
Available versions:
5V, 12V and 48VDC
iSmart Relays
iDrive AC variable speed Drive
Intelligent relays for precise controls
Low cost general purpose micro inverter
iSmart is a tiny intelligent relay / PLC having a 44 I/O point system that uses ladder
graphic and FBD programs for applications
in automation systems. Ismart can expand
up to 3 groups of 4-input-4-outputs modules.
•
•
•
•
•
•
•
•
•
•
•
Multiple out puts
Max 200 ladder step instruction
Many built-in application instructions
•
Timer
•
Counter
•
Analog comparison
•
Upper and lower differentiation
•
PMW function
•
Datalink function
•
Remote I/O
•
HMI function
Integrated EMC filter
Basic & Advanced set-up parameters
DIN rail mounting (IP20 models only)
V/F and sensorless vector operating modes
8 preset frequencies
PID control, with ‘sleep’ operation
DC braking
Thermostatic cooling fan
PNP or NPN operation
Remote keypad option
PC and PDA set-up / test software
Single phase
1Ø, 110V / 50~60Hz, 0.2~0.75kW (¼~1HP)*
1Ø, 230V / 50~60Hz, 0.2~2.2kW (¼~3HP)
Jaguar VXG High performance Drive
3 Phase: 0.37-710kW (0.5-950HP)
With an ultra-fast CPU its reaction to sudden load changes response time is unsurpassed, and with up to
300% torque on tap the VXG has the power to drive even the most demanding of applications with ease
whilst keeping cool and in control with its extensive parameter set and communication options.
• Integrated EMC Filter (EN61800-3 2004 cat C3)
• V/F, Torque Vector and closed loop control
• 200% starting torque between 0.3-5Hz
• Improved open-loop low-speed stability
• Safety input: digital input to enable/disable the IGBT devices
of the inverter output stage
• Mechanical brake control output - torque generated
• PID thermistor input
• Encoder feedback (closed-loop) and shaft synchronizing options
• Internal brake chopper up to 22kW (30-110kW upon request)
22
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
@ 480VAC
Maintenance Kits
All maintenance kits can be modified to suit your requirements. Every kit comes packed with all the right fuses
so your never get caught short. Just give us a call or ask your Fusetek rep.
P/N - MTCE-R250 Time Telay
Class RK5
Description
Fuse Amps
Qty
Ea.
FLNR
250Vac T/D
5, 10, 15, 20, 25, 30A
5
FLNR-id
250Vac T/D
40, 50, 60A
5
FLNR-100id
250Vac T/D
100A
3
LRU-263R
Fuse Reducer
250Vac Class R 60-0Amp
1
LPFP
Fuse Puller 9/16” - 1-9/32” Dia.
P/N - MTCE-R600
1
Class RK5
* 5 - 30Amp are NON Indicating.
FLSR-id
Time Delay
Description
600Vac T/D
LRU-663R Fuse reducer
P/N -MTCE-J
Class J
T/D
JTD-id
LPFP
Time delay
Description
600Vac T/D
Fuse Amps
Qty
Ea.
10, 15, 20, 30, 40, 50,60A
5
80, 100A
3
LRUJ63
Fuse Reducer
LPFP
Fuse Puller 9/16” - 1-9/32” Dia.
600Vac Class J 60-30A
3
1
Fuse Amps
Qty
Ea.
10, 15, 20, 30, 60, 100A
5
600V Class R 60-0Amp
1
Fuse Puller 9/16” - 1-9/32” Dia.
1
P/N MTCE-CC
Class
CC
Description
Fuse Amps
Qty
Ea.
CCMR 600Vac Time Delay 0.5, 1, 3, 5, 10, 15, 20,30A
5
KLKR
600Vac Fast Acting 5, 10, 15, 20, 30A
5
MFP
Fuse Puller 3/16” - 1/2” Dia.
1
Free Fuse Puller included in Kit.
P/N - MTCE-BA9S
BA9S
Description
Colour
Qty
Ea.
10
MTCE-LEDTEC
22MM Pilot
Lights
Description
Colour
Qty
Ea.
BA9SLED
120Vac/dc
R, G, A
BA9SLED
120Vac/dc
W, B
5
LEDTEC
110/120Vac
R, W, B, G, A
5
BA9SLED
24Vac/dc
R, G, A
10
LEDTEC
24VAC/DC
R, W, B, G, A
5
BA9SLED
24Vac/dc
W, B
5
BCR-AX
30mm - 22mm Adapter ring
R=RED, W=White, B=Blue, G=Green, A=Amber
5
R=RED, W=White, B=Blue, G=Green, A=Amber
P/N - MTCE-GLASS
1/4 X 1-1/4”
Description
Fuse Amps
Qty
Ea.
312 (Glass)
250Vac Fast Acting
0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 8, 10A
5
314 (Ceramic)
250Vac Fast Acting
15, 20, 30A
5
313 (Glass)
250Vac Slo-Blo
0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6.25, 8A
5
326 (Glass)
250Vac Slo-Blo
10, 15, 20, 25, 30A
5
217 (Glass)
250Vac Fast Acting
0.25, 0.5, 1, 1.6, 2, 2.5, 3.15, 4, 5, 6.3, 8, 10A
5
218 (Glass)
250Vac Slo-Blo
0.5, 1, 2, 3.15, 4, 5, 6.3, 10A
5
5 x 20mm
Fuse Holders
345-3LF8
Straight 1/4” Nema Q.C 3AB Panel Mount 250V / 20A
5
150-079
19” inline fuse holder for 1/4” x 1.25” 32 V/ 20A
2
150-274
1P,10A/32V for 5x20mm
2
354-901GY
1P, 30A/300V 1/4”Nema for 1/4”x1.1/4”
5
097023
Fuse Puller 5x20mm, 1/4 - 1-1/4” & Auto fuse
1
Free Fuse Puller included in Kit
23
For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Fiberglass Enclosures
Vynckier Fiberglass Enclosures
All fiberglass enclosures are:
•
•
•
•
•
•
•
•
RAL 7035 FRP (fibre reinforced polyester) material is maintenance free, with excellent resistance to UV, corrosion and most chemicals.
Use indoors or outdoors -temperature range from -50*C to 150*C. Momentary to 200*C
Readily worked with standard tools, easy to handle and lighter than metallic enclosures.
Windows, if required are made from 1/4” transparent Lexan polycarbonate.
Total protection against electrical shock.
Poured in place polyurethane gasket ensures high NEMA ratings.
Custom CNC machining service available for all box series
Global approvals
Application range:
•
•
•
•
•
•
•
•
Chemical Processing
Waste water treatment plants
Marine installations
Oil refinery
Mining sites
Pulp and Paper Mills
Temporary connections
Public utilities
•
•
•
•
•
•
•
•
Electroplating plants
Food processing plants
Off Shore platforms
Photovoltaic
Sewage plants
Ship yards
Steel mills
Breweries
VJ Series
•
•
•
•
•
•
Standard JIC dimensions in 7 sizes from 6”x6” to 18”x16” with varying depths.
Available in plain, raised, clear or windowed covers.
Moulded-on mounting flanges.
Stainless steel or non-metallic hinges.
Moulded grid pattern on inner lid simplifies layout.
Different cover closures available.
• Accessories – Instrumentation windows, steel, aluminium or non-metallic backplates, inner hinged covers, vents, back pan standoffs.
Approvals: • UL 508 NEMA 3, 3R, 4, 4X, 12 & 13
• CSA 3, 3R, 4, 4X, 12 & 13
• Lloyd’s Register of Shipping
Rating(s): IP66-11
ARIA Series
Approvals • UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508
• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13
• Lloyd’s Register of Shipping
Rating(s): IP65, IP66
Poly Safe (PS) Series
•
•
•
•
•
•
14 sizes from 20 x 20” to 50 x 40”
Up to 3 depths using collar extensions
Special coating to enhance resistance to UV radiation.
Wall mounted or free standing
Can be coupled horizontally or vertically with gasketed collars.
3 to 5 point door closure system ensures seal integrity
• Accessories – key locks, adjustable mounting hardware, rain hoods, floor pads, inner cover panels, gasketed windows, rear doors.
Approvals • UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508
• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13
• Lloyd’s Register of Shipping
Rating(s): IP65,
24
For complete dimensions on all the enclosure series please visit www.fusetek.com
And download the Vynckier catalogue
Polycarbonate Enclosures
VM Miniature Series
•
•
•
•
•
•
10 sizes from 5 x 3” to 7x7”
Solid or clear covers
Seamless polyurethane gasket
Available with or without moulded knockouts.
Full range of pushbutton stations available
Can be customized with silk screening or moulded logo’s.
• Accessories – hinged window kits, DIN rail kit
Approvals: • UL Listed Types 4, 4x, 3, 3R, 12 & 13
• CSA 4, 4x, 3, 3R, 12 & 13
Rating(s): IP66
Applications
• Ideal for automation and control applications in industry, machinery, tool-shop and OEM.
• Electronic applications in data and telecom industry.
• Also suitable for use as commercial and industrial distribution boxes.
VMS Series
•
•
•
•
•
Modular dimensions in increments of 4”. Sizes from 12 x8” to 24 x 16”
Covers transparent, opaque or DT cover, common design and depth
No tool - removable side walls for easy wiring access.
No tool coupling methods speeds assembly
Adjustable back pan or DIN rail mount depths
• Accessories – Universal cable entry glands, DIN rail kits, depth extension collars
Approvals
• UL Listed Types: 2, 3, 3R, 3S, 5, 12 & 12K
• CSA Listed Types: 2, 3R, 5, 12 & 12
Applications
•
•
•
•
•
Rating(s): IP65
Industry
Public utilities
Motor control centers
Electronic instrumentation
Low voltage distribution boards
Multibox Series
•
•
•
•
•
•
11 sizes from 2x2” to 14 x 10”
Indoor or outdoor use.
Available in Polycarbonate (PC) or Polystyrene (PS).
PC temp range is -35C – 120*C. PS temp range is -40C -70*C
Smooth sides or pre-moulded knockouts.
Solid or clear cover versions.
• Accessories – hinge kits, backpans, mount brackets, air vents, List ratings and approvals
Approvals
• UL Listed Types 4X & 12 (Polycarbonate)
• NEMA 4X & 12 (Polystyrene
Rating(s): IP66
Applications
• Automation and control applications in industry,
machinery, toolshop and OEM.
• Electronic applications in data and telecom industry.
• As commercial and industrial power distribution boxes.
25
For complete dimensions on all the enclosure series please visit www.fusetek.com
And download the Vynckier catalogue
Enclosure Sizes - Opaque listed only
VJ Series
Part
O/D Dims
VM Series
I/D Dims
Part
O/D
H X W X D inches (mm)
VJ606W
VJ606HW
VJ606HWPL1
VJ606HWLL1
VJ606NHW
VJ606NHWPL1
VJ606NHWLL1
VJ806W
VJ806HW
VJ806HWPL1
VJ806HWLL1
VJ806NHW
VJ806NHWPL1
VJ806NHWLL1
VJ1008W
VJ1008HW
VJ1008HWPL1
VJ1008HWLL1
VJ1008NHW
VJ1008NHWPL1
VJ1008NHWLL1
VJ1210W
VJ1210HW
VJ1210HWPL2
VJ1210HWLL2
VJ1210NHW
VJ1210NHWPL2
VJ1210NHWLL2
VJ1412W
VJ1412HW
VJ1412HWPL2
VJ1412HWLL2
VJ1412NHW
VJ1412NHWPL2
VJ1412NHWLL2
7.31 x 7.31 x 4.92
(186 x 186 x 125)
9.31 x 7.31 x 4.92
(236 x 186 x 125)
11.31 x 9.31 x 5.43
(287 x 236 x 138
13.31 x 11.31 x 5.60
(338 x 287 x 142)
15.31 x 13.31 x 6.60
(389 x 338 x 168)
6 x 6 x 4.64
(152 x 152 x 118)
8 x 6 x 4.64
(203 x 152 x 118)
10 x 8 x 5.15
(254 x 203 x 131)
12 x 10 x 5.27
(305 x 254 x 134)
4.36 x 3.18 x 3.66
(111 x 81 x 93)
4.01 x 2.82 x 3.31
(102 x 72 x 84)
VM533
5.03 x 3.06 x 3.02
(128 x 78 x 77)
4.69 x 2.72 x 2.72
(119 x 69 x 69)
VM534
5.03 x 3.06 x 4.02
(128 x 78 x 102)
4.69 x 2.72 x 3.72
(119 x 69 x 69)
VM553
5.03 x 5.03 x 3.02
(128 x 128 x 77)
4.69 x 4.69 x 2.72
(119 x 119 x 69)
VM544
5.03 x 5.03 x 4.02
(128 x 128 x 102)
4.69 x 4.69 x 3.72
(119 x 119 x 94)
VM733
6.72 x 3.17 x 3.61
(171 x 81 x 92)
6.37 x 2.82 x 3.33
(162 x 72 x 85)
VM753
7.00 x 5.03 x 2.97
(178 x 128 x 75)
6.65 x 4.69 x 2.72
(169 x 119 x 69)
VM754
7.00 x 5.03 x 4.02
(178 x 128 x 102)
6.65 x 4.69 x 3.72
(169 x 119 x 94)
VM755
7.00 x 5.03 x 5.02
(177 x 128 x 128)
6.65 x 4.69 x 4.72
(169 x 119 x 120)
VM773
7.00 x 7.00 x 3.02
(178 x 178 x 77)
6.65 x 6.65 x 2.72
(169 x 169 x 69)
VM775
7.00 x 7.00 x 5.02
(178 x 178 x 128)
6.65 x 6.65 x 4.72
(169 x 169 x 120)
VM776
7.00 x 7.00 x 6.02
(178 x 178 x 153)
6.65 x 6.65 x 5.72
(169 x 169 x 145)
VM933
9.09 x 3.18 x 3.61
(171 x 81 x 92)
8.74 x 2.84 x 3.33
(222 x 72 x 85)
ARIA Series
Part
O/D Dims
I/D Dims
H X W X D inches (mm)
17.31 x 15.31 x 6.67
(440 x 389 x 169)
16 x 14 x 6.41
(406 x 356 x 163)
VJ1816W
VJ1816HW
VJ1816HWPL2
VJ1816HWLL2
VJ1816NHW
VJ1816NHWPL2
VJ1816NHWLL2
19.31 x 17.31 x 9.58
(490 x 440 x 243)
18 x 16 x 9.33
(457 x 406 x 237)
VMS Series
O/D
I/D Size
H X W X D inches (mm)
26
VM433
14 x 12 x 6.27
(356 x 305 x 159)
VJ1614W
VJ1614HW
VJ1614HWPL2
VJ1614HWLL2
VJ1614NHW
VJ1614NHWPL2
VJ1614NHWLL2
Part
I/D Size
H X W X D inches (mm)
VMS1208
VMS1208CT
12.60 x 8.66 x 7.05
(320 x 220 x 179)
11.06 x 7.12 x 6.11
(281 x 181 x 155)
VMS1212
VMS1212CT
VMS1212DT
12.60 x 12.60 x 7.05
(320 x 320 x 179)
11.06 x 11.06 x 6.11
(281 x 281 x 155)
VMS1612
VMS1612CT
VMS1612DT
17.32 x 12.60 x 7.05
(440 x 320 x 179)
15.78 x 11.06 x 6.11
(401 x 281 x 155)
VMS2412
VMS2412CT
25.2 x 12.60 x 7.05
(640 x 320 x 179)
23.66 x 11.06 x 6.11
(601 x 281 x 155)
VMS2416
VMS2416CT
25.2 x 17.32 x 7.05
(640 x 440 x 179)
23.66 x 15.78 x 6.11
(601 x 401 x 155)
AN1208
AN1208FPHA
AN1208HKLA
AN1208HNA
AN1208HPLA
AN1208PL
AN1208PLFPHA
12.40 x 8.46 x 6.69
(315 x 215 x 170)
10.82 x 6.69 x 6.38
(275 x 170 x 162)
AN1612
AN1612FPHA
AN1612HKLA
AN1612HNA
AN1612HPLA
AN1612PL
AN1612PLFPHA
16.34 x 12.40 x 6.69
(415 x 315 x 170)
14.83 x 10.63 x 6.38
(375 x 270 x 162)
AN2016
AN2016FPHA
AN2016HKLA
AN2016HNA
AN2016HPLA
AN2016PL
AN2016PLFPHA
20.28 x 16.34 x 9.06
(515 x 415 x 230)
18.75 x 14.58 x 8.82
(475 x 370 x 224)
AN2416
AN2416FPHA
AN2416HKLA
AN2416HNA
AN2416HPLA
AN2416PL
AN2416PLFPHA
24.21 x 16.34 x 9.06
(615 x 415 x 230)
22.70 x 14.51 x 8.82
(575 x 370 x 224)
AN2820
AN2820FPHA
AN2820HKLA
AN2820HNA
AN2820HPLA
AN2820PL
AN2820PLFPHA
28.94 x 21.06 x 10.63
(735 x 535 x 270)
26.57 x 18.50 x
10.39
(675 x 470 x 264)
AN3325
AN3325FPHA
AN3325HKLA
AN3325HNA
AN3325HPLA
AN3325PL
AN3325PLFPHA
32.87 x 25.00 x 11.81
(835 x 635 x 300)
30.78 x 22.44 x
11.57
(775 x 570 x 294)
AN4032
AN4032FPHA
AN4032HKLA
AN4032HNA
AN4032HPLA
AN4032PL
AN4032PLFPHA
40.75 x 32.87 x 11.81
(1035 x 835 x 300)
39.16 x 30.28 x
11.57
(975 x 770 x 294)
For complete dimensions on all the enclosure series please visit www.fusetek.com
And download the Vynckier catalogue
Enclosure Sizes - Opaque listed only
MutliBox Series
Part
O/D
I/D Size
Part
O/D
I/D Size
H X W X D inches (mm)
MB252502PC
MB252502PS
2.55 x 2.55 x 2.25
(65 x 65 x 57)
2.32 x 2.32 x 1.77
(59 x 59 x 45)
MB070402PC
MB070402PS
7.08 x 3.70 x 2.24
(180 x 94 x 57)
6.85 x 3.46 x 1.77
(174 x 88 x 45)
MB252503PC
MB252503PS
2.55 x 2.55 x 3.18
(65 x 65 x 81)
2.32 x 2.32 x 2.72
(59 x 59 x 69)
MB070403PC
MB070403PS
7.08 x 3.70 x 3.19
(180 x 94 x 81)
6.85 x 3.46 x 2.72
(174 x 88 x 69)
MB042502PC
MB042502PS
3.70 x 2.55 x 2.25
(94 x 65 x 57)
2.32 x 2.32 x 1.77
(88 x 59 x 45)
MB070435PC
MB070435PS
7.08 x 4.33 x 3.54
(180 x 110 x 90)
6.81 x 4.06 x 2.95
(173 x 103 x 75)
MB042503PC
MB042503PS
3.70 x 2.55 x 3.18
(94 x 65 x 81)
3.46 x 2.32 x 2.72
(88 x 59 x 69)
MB070404PC
MB070404PS
7.08 x 4.33 x 4.37
(180 x 110 x 111)
6.81 x 4.06 x 3.82
(173 x 103 x 97)
MB040402PC
MB040402PS
3.70 x 3.70 x 2.24
(94 x 94 x 57)
3.46 x 3.46 x 1.77
(88 x 88 x 45)
MB070465PC
MB070465PS
7.08 x 4.33 x 6.50
(180 x 110 x 165)
6.81 x 4.06 x 5.91
(173 x 103 x 150)
MB040403PC
MB040403PS
3.70 x 3.70 x 3.18
(94 x 94 x 81)
3.46 x 3.46 x 2.72
(88 x 88 x 69)
MB070735PC
MB070735PS
7.08 x 7.17 x 3.54
(180 x 182 x 90)
6.85 x 6.93 x 2.95
(174 x 176 x 75)
MB040425PC
MB040425PS
4.33 x 4.33 x 2.60
(110 x 110 x 66)
4.09 x 4.09 x 2.13
(104 x 104 x 54)
MB070704PC
MB070704PS
7.08 x 7.17 x 4.37
(180 x 182 x 111)
6.85 x 6.93 x 3.82
(174 x 176 x 97)
MB040435PC
MB040435PS
4.33 x 4.33 x 3.54
(110 x 110 x 90
4.09 x 4.09 x 3.07
(104 x 104 x 78)
MB070765PC
MB070765PS
7.08 x 7.17 x 6.46
(180 x 182 x 164)
6.85 x 6.93 x 5.94
(174 x 176 x 151)
MB050402PC
MB050402PS
5.11 x 3.70 x 2.24
(130 x 94 x 57)
4.88 x 3.46 x 1.77
(124 x 88 x 45)
MB100735PC
MB100735PS
10.00 x 7.09 x 3.54
(254 x 180 x 90)
9.76 x 6.85 x 2.95
(248 x 174 x 75)
MB050403PC
MB050403PS
5.11 x 3.70 x 3.19
(130 x 94 x 81)
4.88 x 3.46 x 2.72
(124 x 88 x 69)
MB100704PC
MB100704PS
10.00 x 7.09 x 4.37
(254 x 180 x 111)
9.76 x 6.85 x 3.82
(248 x 174 x 97)
MB050503PC
MB050503PS
5.11 x 5.11 x 2.95
(130 x 130 x 75)
4.88 x 4.88 x 2.48
(124 x 124 x 63)
MB100765PC
MB100765PS
10.00 x 7.09 x 6.50
(254 x 180 x 165)
9.76 x 6.85 x 5.94
(248 x 174 x 151)
MB050504PC
MB050504PS
5.11 x 5.11 x 3.90
(130 x 130 x 99)
4.88 x 4.88 x 3.43
(124 x 124 x 87)
MB141004PC
MB141004PS
14.21 x 10.00 x 4.37
(361 x 254 x 111)
13.98 x 9.76 x 3.82
(355 x 248 x 97)
MB141065PC
MB141065PS
14.21 x 10.00 x 6.46
(361 x 254 x 164)
13.98 x 9.76 x 5.91
(355 x 248 x 150)
APO Series
Part
O/D
Poly Safe Series
I/D Size
Part
H X W X D inches (mm)
O/D
I/D Size
H X W X D inches (mm)
A1-706
A1-706H
A1-706HPL1
7.32 x 5.94 x 5.50
(186 x 151 x 140)
6.54 x 5.16 x 5.00
(165 x 131 x 127)
PS2020A
PS2020ADFR
19.69 x 19.69 x 12.60
(500 x 500 x 320)
19.44 x 19.44 x 12.35
(494 x 494 x 314)
A31-1207
A31-1207H
A31-1207HPL2
11.89 x 7.32 x 6.93
(302 x 186 x 176)
11.10 x 6.54 x 6.43
(282 x 166 x 163)
PS2030A
PS2030ADFR
19.69 x 29.53 x 12.60
(500 x 750 x 320)
19.44 x 29.28 x 12.35
(494 x 744 x 314)
A41-1212
A41-1212H
A41-1212HPL2
PS3020A
PS3020ADFR
29.53 x 19.69 x 12.60
(750 x 500 x 320)
29.28 x 19.44 x 12.35
(744 x 494 x 314)
11.89 x 11.89 x 6.93
(302 x 302 x 176)
11.10 x 11.10 x 6.43
(282 x 282 x 163)
PS3030A
PS3030ADFR
29.53 x 29.53 x 12.60
(750 x 750 x 320)
29.28 x 29.28 x 12.35
(744 x 744 x 314)
A71-1412
A71-1412H
A71-1412HPL2
14.65 x 11.89 x 6.93
(372 x 302 x 176)
13.86 x 11.10 x 6.43
(352 x 282 x 163)
PS3040A
PS3040ADFR
29.53 x 39.37 x 12.60
(750 x 1000 x 320)
29.28 x 39.12 x 12.35
(744 x 994 x 314)
A51-1912
A51-1912H
A51-1912HPL2
19.20 x 11.89 x 6.93
(488 x 302 x 176)
18.40 x 11.10 x 6.43
(467 x 282 x 163)
PS3050/2A
PS3050/2ADFR
29.53 x 49.21 x 12.60
(750 x 1250 x 320)
29.28 x 48.96 x 12.35
(744 x 1244 x 314)
PS4020A
PS4020ADFR
39.37 x 19.69 x 12.60
(1000 x 500 x 320)
39.12 x 19.44 x 12.35
(994 x 494 x 314)
A81-2212
A81-2212H
A81-2212HPL2
21.97 x 11.89 x 6.93
(558 x 302 x 176)
21.14 x 11.10 x 6.43
(537 x 282 x 163)
PS4030A
PS4030ADFR
39.37 x 29.53 x 12.60
(1000 x 750 x 320)
39.12 x 29.28 x 12.35
(994 x 744 x 314)
A61-2412
A61-2412H
A61-2412HPL2
23.74 x 11.89 x 6.93
(603 x 302 x 176)
22.91 x 11.10 x 6.43
(582 x 282 x 163
PS4040A
PS4040/2A
PS4040ADFR
PS4040/2ADFR
39.37 x 39.37 x 12.60
(1000 x 1000 x 320)
39.12 x 39.12 x 12.35
(994 x 994 x 314)
A11-2414
A11-2414H
A11-2414HPL2
23.74 x 14.65 x 6.93
(603 x 372 x 176)
22.91 x 13.86 x 6.43
(582 x 352 x 163)
PS4050/2A
PS4050/2ADFR
39.37 x 49.21 x 12.60
(1000 x 1250 x 320)
39.12 x 48.96 x 12.35
(994 x 1244 x 314)
A12-2424
A12-2424H
A12-2424HPL4
23.74 x 23.74 x 6.93
(603 x 603 x 176)
22.91 x 22.91 x 6.43
(582 x 582 x 163)
PS5030A
PS5030ADFR
49.21 x 29.53 x 12.60
(1250 x 750 x 320)
48.96 x 29.28 x 12.35
(1244 x 744 x 314)
PS5040/2A
PS5040/2LA
PS5040/2ADFR
PS5040/2LADFR
49.21 x 39.37 x 12.60
(1250 x 1000 x 320
48.96 x 39.12 x 12.35
(1244 x 994 x 314)
Basic I.P. Rating
First digit - Solid Particle Protection: 0 = No protection, 1 = back of hand, 2 = finger safe, 3 = Tool, 4 = wire, 5 = dust protected & wire,
6= Dust Tight
Second Digit - Liquid ingress Protection: 0=None, 1 = Dripping water, dripping water when tilted at 15 degress, 3 = spraying water,
4 = splashing of water, 5=water jets, 6= powerful water jets, 7= immersion to 1 meter, 8=immersion beyond 1 meter,
9k=Powerful high temperature water jets.
27
For complete dimensions on all the enclosure Series please visit www.fusetek.com
And download the Vynckier catalogue
599 Norris Court
Kingston, Ontario
Canada, K7P2R9
Pub.#PSG-01V2 Printed in Canada
T: (800) 479-3875
F: (800) 866-7690
E: [email protected]
W: www.fusetek.com