1300 1ALTEC

Insulated Aerial Device
Working Height of 16 m
Side Reach of 9.3 m
Platform Capacity of 272 kg
1300 1ALTEC
www.altecaus.com.au
TA45S
TA45S
TA45S
SINGLE MAN
OPERATION
4-FUNCTION
SINGLE HANDLE
upper control
180°
PLATFORM
180°
ROTATOR
PLATFORM
ROTATOR
STANDARD FEATURES
A LTEC
ISO -G RIP ®
ALTEC
ISO-GRIP
LIFETIME
STRUCTURAL
LIFETIME
STRUCTURAL
WARRANTY
WARRANTY
R each Diagram
OPTIONS
• Altec ISO-Grip ® System – Single Hand Control
• Custom Layout, Lockers and Accessories as required
• Lifetime structural warranty
• Chassis Spring Interlocks for use without Outriggers
• Insulation per AS1418.10 - 2011, 66kv/66kv Dry &
• Comprehensive Range of Tools and Equipment from
66kv/33kv Wet
Altec Supply®
• Continuous Rotation
• Designed in ISO 9001 Certified Facilities
• 180 Degree Platform Rotator
GENERAL SPECIFICATIONS
• 2 Man Platform
180 ° Platform Rotator
• Platform Capacity – 272 kg’s
Ground to Bottom of Platform*
14.5 m
• Platform Access from the Ground S tandard Features
• Telescopic/Articulated Aerial Device
• Altec ISO-Grip ® System
Working Height
16 m
• Telescopic/Articulated Aerial Device
• Tool Circuit at Platform
Maximum Reach
9.3 m
• Hydraulic Boom Extension
• Straight Down Outriggers
• Hydraulic Pltform Levelling Boom Articulations
• Secondary Stowage System
Articulating
-5˚ to +91˚
• Insulated, ANSI Category C, 46kv
and belowArm
• Powder-coated steel structures • AS1418.10, 33kv/33kv
Upper Boom
-38˚ to +75˚
• Designed in ISO 9001 Certified Facilities
• Noncontinuous Rotation
*Varies Depending
on Chassis Frame Height
Platform, 610mm x 610mm x 1067mm
Nominal
• Centrifugally Cast Fiberglass Upper• Boom
•
Platform
Capacity
–
159kg
fixed
159kg
w/rotator
• Pressure, Closed Centre Hydraulic System
•
•
•
•
•
•
•
•
Fully Metered Single Handle Upper Control
Full Pressure, Open Centre Hydraulic System
Platform Access from the Ground
Emergency Lowering Valve
Tool Circuit at Platform
Outrigger Boom Interlock System (With Outrigger Option)
Outrigger Motion Alarm (With Outrigger Option)
Back-up Alarm
Options
•
•
•
•
•
•
G eneral S pecifications
REACH DIAGRAM
Ground to Bottom of Platform *
(At Distance from Centreline)
9.3m
1.2m
Maximum Reach
End-Mount
Side-Mount
(@ Platform Height)
7.2m
6.6m
1.9m
Stowed Travel Height
R ecommended Features
• Fall protection System
• Platform Liner
• Wheel Chocks
•
•
•
•
•
A
Pl
Pl
18
18
• W
3.2m
Boom Articulation
-13.5° to +80°
Rotation
Weight of Unit
Continuous Rotation
Secondary Stowage System
Engine Start/Stop
Tool Circuit at Tailshelf
Outriggers, Vertical
Platform, 610 x 762 x 1067
Noncontinuous 370°
180 degree platform rotator
747kg
ISO-Grip Control
Control
Iso-Grip
®
* Varies depending on Chassis Frame Height
www.a
Vemco Group
Australian dis
pro
Disclaimer:
Users visit
of the
Group’s services
and/or
information
within this document
must
make their
own assessment
for suitability
particula
For more complete information on Altec products
and services,
usVEMCO
on www.altecaus.com.
Material
and specifications
are
subject
to change
without
notice. Featured
units for their FLEET
VEGETATION
MANAGEMENT
DESIGN
& CONSTRUCTION
ENVIRONMENTAL
MANAGEMENT
SPECIALITY
Construction
teal for all your
relatedoptions.
servicesAltec®
or if anyand
more
information
on this case
study. of Altec Inc. in the
in photos may include optional features. Please Design
contact& an
Altec representative
for project
all available
the
Altec logorequired
are registered
trademarks
United States and various other countries and may not be used without permission.
Vemco Group | Building 2 Level 3, 18 Compark Circuit Mulgrave VIC 3170 | PO Box 478 Mt Waverley VIC 3149
© 2015 Altec Inc. All Rights Reserved. AAH.BR.AL16.8
Tel: +(613) 8542 0700 Fax: +(613) 8542 0703 | Email: [email protected] | www.vemco.com.au
Altec
A L TAustralia
E C | Holdings
A L T E CPty
. C Ltd,
o m44-50 Gaine Rd, Dandenong South Victoria 3175 | 1300 1ALTEC | www.altecaus.com.au
REF: DC/01 OCT 2010