Codification

Transcription

Codification

C ata lo g U E
AgricUlturE
2 0 1 6
C ata lo g U E
IT-QCATAG-E / 16
C a t a l o g U E AgricUlturE 2 0 1 6
AgricUlturE
I.S.E. S.r.l. Via dell’Artigianato, 1-3
00065 Fiano Romano (Roma) • Italy
Tel. +39 0765 40191
Fax +39 0765 455386
www.toro-ag.it
www.youtube.com/ISEontheweb
2 0 1 6
Index
Tape and Dripline
Aqua-Traxx PBX
page 6
Aqua-Traxx FC
page 12
Neptune
page 16
Neptune HW
page 22
Neptune PC
page 26
Drip In PC
page 32
Hose
page 34
Ag-Flat
page 36
®
Mini Sprinklers
WB VI Classic
page 52
WB VII PC
page 54
Drippers
2
Euro Key
page 40
Euro Plus
page 41
NGE AL
page 42
NGE SF
page 44
NGE Dripper Accessories
page 46
Capillary Line
page 49
Filters
M Series
page 58
S and F Series
page 59
XD Series
page 60
SD Series
page 62
I.S.E. S.r.l. may change product specifications without prior notice and without liability.
Index
Accessories
Tape and Drip line Accessories page 82
Filters Accessories
page 84
Mazzei Injectors Accessories
page 85
Various Accessories
page 86
Air Release Valves
page 87
H2OCAD® 3.0
page 88
Controllers
Filcom
page 66
DC
page 67
Multi Program
page 68
Fertigation
Mazzei Injectors
Appendix
Laying Aqua-Traxx and
Neptune
page 92
Filtration
page 93
Fertigation
page 95
page 72
Promotional
Dosatron Water Powered
Proportional Injectors:
D3
page 75
D8
page 76
D45
page 77
D20
page 78
Items Literature
page 100
Merchandising
page 101
Resources page 102
3
4
Tape and Dripline
5
Aqua-TraXX® PBX
qua-TraXX® PBX is an innovative drip tape
A
guaranteeing precise uniform water and
nutrient distribution to all plants.
The Aqua-TraXX® PBX flow path has been
designed with a proportionally balanced cross
section (PBX) to optimise turbulence in the
emitter to obtain:
Range
Greater water speed;
High resistance to clogging;
Thanks to the PBX technology,
Aqua-TraXX® offers the widest
most complete range of
products on the market:
Better flow path definition;
A wide range of products with low flow rates
and very close emitters.
Diameter 16 mm (5/8”)
- Wall thickness 5/6/7/8/10/12
and 15 mil
Aqua-TraXX® PBX drip tape offers the best
performance on the market, with excellent
emission uniformity and extraordinary quality.
- Wall thickness 7/8/10/12
and 15 mil
Emitter spacing
10/15/20/30/40/45/60 cm
TAPE AND DRIPLINE
9 different emitters
- 2,13 l/h @ 0,7 bar
- 1,41 l/h @ 0,7 bar
- 1,14 l/h @ 0,7 bar
- 0,87 l/h @ 0,7 bar
- 0,64 l/h @ 0,7 bar
- 0,57 l/h @ 0,7 bar
- 0,42 l/h @ 0,7 bar
- 0,38 l/h @ 0,7 bar
- 0,30 l/h @ 0,7 bar
Main features
Thanks to the innovative technology and high quality
standards of the product, the characteristics of the
Aqua-TraXX® PBX are unique on the market:
High mechanical resistance for quick easy installation
(shorter laying times and therefore lower labour costs
and less risk of damaging the product);
Extraordinary efficiency, allowing long lateral lines with
very uniform water distribution and therefore high crop
uniformity;
Durability and excellent reliability achieved through
meticulous design and constant, precise control of the
extrusion process;
High resistance to clogging thanks to the PBX
technology;
The large number of inlets per emitter ensures
constant and uniform water distribution;
An inlet filter prevents sediment deposits from
entering the emitter;
Excellent CV (Coefficient of Variation) thanks to
the precision of the flow path which guarantees a
completely turbulent flow;
Double blue stripes for easy identification;
Single extrusion process, guaranteeing uniform
dimensions and mechanical characteristics (no
welding, no seams);
Product identification code printed on
tube with laser technology.
Large outlet section produced using laser technology;
6
Aqua-TraXX® PBX
Code
Aqua-TraXX® PBX is ideal for irrigating:
Extensive crops:
corn, sorghum, sugar beet, tobacco;
Horticultural crops:
-Solanaceae (tomatoes, potatoes, peppers, aubergines);
-Brassicaceae (cauliflower, broccoli, cabbage);
-Asteraceae (artichokes, lettuce, chicory);
-Cucurbitaceae (courgettes, melons, water
melons, cucumbers, pumpkins);
-Liliaceae (asparagus, onions, garlic, leeks,
shallots);
-Umbelliferae (fennel, parsley, celery);
Small fruit: strawberries, bilberries,
raspberries, blackberries, blackcurrants;
Medicinal plants.
Codification
Emitter (2,13 l/h)
RAXxx04265-yyy
RAXxx08133-yyy
Emitter (1,41 l/h)
RAXxx04170-yyy
RAXxx06112-yyy
RAXxx0884-yyy
RAXxx1256-yyy
RAXxx1642-yyy
RAXxx2428-yyy
Emitter (1,14 l/h)
RAXxx04134-yyy
RAXxx0867-yyy
RAXxx1245-yyy
RAXxx1634-yyy
RAXxx2422-yyy
Emitter (0,87 l/h)
RAXxx04100-yyy
RAXxx0667-yyy
RAXxx0850-yyy
RAXxx1234-yyy
RAXxx1625-yyy
RAXxx2417-yyy
Emitter (0,64 l/h)
RAXxx0650-yyy
RAXxx1225-yyy
RAXxx1817-yyy
Emitter (0,57 l/h)
RAXxx0467-yyy
RAXxx0834-yyy
RAXxx1222-yyy
RAXxx1617-yyy
RAXxx2411-yyy
Emitter (0,42 l/h)
RAXxx0825-yyy
RAXxx1613-yyy
Emitter (0,38 l/h)
RAXxx0822-yyy
RAXxx1611-yyy
Emitter (0,30 l/h)
RAXxx0817-yyy
RAXxx1608-yyy
Emitter
spacing
(cm)
Individual emitter
flow rate
(l/h) @
Flow rate
per meter
(l/h/m) @
0,55 bar 0,7 bar 0,55 bar 0,7 bar
Required
Filtration
Mesh
120-140
10
20
2,00
2,00
2,13
2,13
20,00
10,00
21,30
10,65
10
15
20
30
40
60
1,29
1,29
1,29
1,29
1,29
1,29
1,41
1,41
1,41
1,41
1,41
1,41
12,90
8,60
6,45
4,30
3,23
2,15
14,10
9,40
7,05
4,70
3,53
2,35
10
20
30
40
60
1,02
1,02
1,02
1,02
1,02
1,14
1,14
1,14
1,14
1,14
10,20
5,10
3,40
2,55
1,70
11,40
5,70
3,80
2,85
1,90
10
15
20
30
40
60
0,76
0,76
0,76
0,76
0,76
0,76
0,87
0,87
0,87
0,87
0,87
0,87
7,60
5,07
3,80
2,53
1,90
1,27
8,70
5,80
4,35
2,90
2,18
1,45
15
30
45
0,57
0,57
0,57
0,64
0,64
0,64
3,80
1,90
1,27
4,27
2,13
1,42
10
20
30
40
60
0,49
0,49
0,49
0,49
0,49
0,57
0,57
0,57
0,57
0,57
4,90
2,45
1,63
1,23
0,82
5,70
2,85
1,90
1,43
0,95
20
40
0,38
0,38
0,42
0,42
1,90
0,95
2,10
1,05
20
40
0,34
0,34
0,38
0,38
1,70
0,85
1,90
0,95
20
40
0,27
0,27
0,30
0,30
1,35
0,68
1,50
0,75
120-140
120-140
140
140
140
200
200
200
RA 5 08 08 34 - 750
Reel length in feet / 10*
ID for Aqua-TraXX® PBX
Internal diameter in eighths of
an inch: 5/8” (16 mm)
Flow rate in US Gal / min/
100 feet @ 0.5 bar
Wall thickness in mil:
8 mil (0.20 mm)
Emitter spacing in inches:
8” (20 cm)
TAPE AND DRIPLINE
Applications
*apart from 5 mil, 7 mil and short reels for which length is expressed in metres/100.
The identification for Aqua-TraXX® PBX made in Romania is “PA”
7
Aqua-TraXX® PBX
Performance
The following tables indicate the maximum length of the lines in relation to
inlet water pressure.
Note:
In determining the maximum length, the maximum inlet pressure as indicated
in the “Technical Data” table must be respected.
Diameter 5/8” (16 mm) - Slope 0%
Tape and Dripline
Code
Individual
emitter flow
rate @ 0,7 bar
Emitter
spacing
Emission
uniformity
(EU)
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
RA5xx04265-yyy
2,13 l/h
10 cm
RA5xx08133-yyy
2,13 l/h
20 cm
RA5xx04170-yyy
1,41 l/h
10 cm
RA5xx06112-yyy
1,41 l/h
15 cm
RA5xx0884-yyy
1,41 l/h
20 cm
RA5xx1256-yyy
1,41 l/h
30 cm
RA5xx04134-yyy
1,14 l/h
10 cm
RA5xx0867-yyy
1,14 l/h
20 cm
RA5xx1245-yyy
1,14 l/h
30 cm
RA5xx1634-yyy
1,14 l/h
40 cm
RA5xx04100-yyy
0,87 l/h
10 cm
RA5xx0667-yyy
0,87 l/h
15 cm
RA5xx0851-yyy
0,87 l/h
20 cm
RA5xx1234-yyy
0,87 l/h
30 cm
RA5xx1625-yyy
0,87 l/h
40 cm
RA5xx0650-yyy
0,64 l/h
15 cm
RA5xx1226-yyy
0,64 l/h
30 cm
RA5xx0467-yyy
0,57 l/h
10 cm
RA5xx0834-yyy
0,57 l/h
20 cm
RA5xx1222-yyy
0,57 l/h
30 cm
RA5xx1617-yyy
0,57 l/h
40 cm
RA5xx0825-yyy
0,42 l/h
20 cm
RA5xx1613-yyy
0,42 l/h
40 cm
RA5xx0822-yyy
0,38 l/h
20 cm
RA5xx1611-yyy
0,38 l/h
40 cm
RA5xx0817-yyy
0,30 l/h
20 cm
RA5xx1608-yyy
0,30 l/h
40 cm
Maximum Lateral Lengths in meters
@ 0,5 bar @ 0,6 bar @ 0,7 bar @ 0,8 bar @ 0,9 bar @ 1,0 bar
54
62
66
66
67
67
51
52
52
52
53
53
114
131
142
145
146
146
112
113
114
115
116
118
90
92
93
93
94
94
73
74
74
75
75
76
95
109
119
120
121
122
94
95
96
96
97
98
140
142
144
145
146
147
113
114
115
116
118
118
182
184
185
187
188
189
147
149
150
151
152
153
104
105
106
107
108
108
84
85
85
86
87
87
162
164
165
167
168
170
131
132
133
134
135
136
210
212
214
216
217
219
170
172
173
175
176
177
253
256
258
260
262
263
204
206
208
209
211
212
127
128
129
130
131
132
102
103
104
105
105
106
163
165
167
168
170
171
132
133
135
136
136
137
197
199
201
202
204
205
159
160
161
163
164
165
255
258
260
262
264
265
206
208
209
211
212
214
306
309
312
315
317
318
246
250
252
254
256
257
197
200
201
202
204
205
159
160
162
163
164
165
306
309
312
315
317
318
246
250
252
254
255
257
166
168
170
171
173
174
134
135
137
138
139
139
259
262
264
266
268
269
209
211
213
214
216
217
335
339
342
344
347
349
270
274
276
278
280
281
402
407
411
414
416
419
324
328
331
333
336
338
302
304
305
306
307
308
241
242
243
244
245
245
472
475
477
480
481
482
381
383
385
387
388
389
322
324
326
327
328
329
258
259
260
261
263
263
496
498
500
502
503
506
400
401
404
405
406
408
379
381
383
384
385
386
304
305
306
308
308
308
589
591
594
596
598
599
470
472
474
476
477
479
Irrloc software allows you to quickly design your irrigation system even on hilly or undulating terrains.
Through Irrloc, you can also design the mainlines and you can display the emission uniformity on both the later lines and irrigation blocks.
Free download: www.toro-ag.it.
8
Aqua-TraXX® PBX
Individual
emitter flow
rate @ 0,7 bar
Emission
uniformity
(EU)
Emitter
spacing
RA7xx08133-yyy
2,13 l/h 20 cm
RA7xx06112-yyy
1,41 l/h 15 cm
RA7xx0867-yyy
1,14 l/h
20 cm
RA7xx1245-yyy
1,14 l/h
30 cm
RA7xx1634-yyy
1,14 l/h
40 cm
RA7xx04100-yyy
0,87 l/h 10 cm
RA7xx0667-yyy
0,87 l/h
15 cm
RA7xx0851-yyy
0,87 l/h
20 cm
RA7xx1234-yyy
0,87 l/h
30 cm
RA7xx0467-yyy
0,57 l/h
10 cm
RA7xx0834-yyy
0,57 l/h
20 cm
RA7xx1222-yyy
0,57 l/h
30 cm
RA7xx0825-yyy
0,42 l/h
20 cm
RA7xx1613-yyy
0,42 l/h
40 cm
RA7xx0822-yyy
0,38 l/h
20 cm
RA7xx1611-yyy
0,38 l/h
40 cm
RA7xx0817-yyy
0,30 l/h
20 cm
RA7xx1608-yyy
0,30 l/h
40 cm
@ 0,5 bar
@ 0,6 bar
@ 0,7 bar
@ 0,8 bar
@ 0,9 bar
@ 1,0 bar
85% 174 175176177 179 181
90%
140
141
142
143
144
145
85%
194
224
245
246249 251
90% 192 194 197 198 200 201
85%
288
291
294
296
298301
90%
233
235
237
239
240
242
85%
373
378
381
384
387
389
90%
302
305
307
309311 313
85%
448
453
456
460
464
466
90%
361
365
368
370
373375
85%
225
227
229
231
233
234
90%
181
183
185
186
187
188
85%
291
294
296
300301 303
90%
234
237
239
241
243
244
85%
349
354
357
359
362364
90%
282
285
287
289
291
293
85%
452
457
461
465468 470
90%
365
368
372
375
378
381
85%
295
298
302
304
306308
90%
238
241
243
245
246
249
85%
460
464
468
472
475
478
90%
370
374
379
382383 387
85%
595
601
606
610
615
608
90%
478
486
490
494
497500
85%
528
531
534
536
538
539
90%
426
428
431
433
434
435
85%
822
827
831
833836 838
90%
664
667
670
672
674
676
85%
566
569
571
573
574576
90%
457
459
461
462
463
465
85%
876
885
889
891
894
896
90%
706
713
717
719721 723
85%
664
668
671
673
674
677
90%
536
539
541
543
544546
85%
1033
1038
1042
1046
1050
1052
90%
833
837
840
843
847
849
Tape and Dripline
Code
9
Aqua-TraXX® PBX
Technical and logistical data
Standard reels
Nominal
diameter
16 mm (5/8”)
22 mm (7/8”)
Internal
diameter
16,1 mm
22,3 mm
5 mil
6 mil
0,13 mm
0,15 mm
Min
pressure
0,3 bar
0,3 bar
7 mil
0,18 mm
0,3 bar
0,9 bar
2900 m
29,40 kg
30,35 kg
52,5 cm x 28 cm
8 mil
0,20 mm
0,3 bar
1,0 bar
2286 m
26,33 kg
27,28 kg
52,5 cm x 28 cm
10 mil
0,25 mm
0,3 bar
1,0 bar
1828 m
25,87 kg
26,82 kg
52,5 cm x 28 cm
12 mil
0,30 mm
0,3 bar
1,0 bar
1554 m
26,07 kg
27,02 kg
52,5 cm x 28 cm
15 mil
0,38 mm
0,3 bar
1,0 bar
1220 m
25,31 kg
26,26 kg
52,5 cm x 28 cm
7 mil
0,18 mm
0,3 bar
0,7 bar
2100 m
28,45 kg
29,40 kg
52,5 cm x 28 cm
8 mil
0,20 mm
0,3 bar
0,8 bar
1828 m
28,12 kg
29,07 kg
52,5 cm x 28 cm
10 mil
0,25 mm
0,3 bar
1,0 bar
1341 m
25,56 kg
26,51 kg
52,5 cm x 28 cm
12 mil
0,30 mm
0,3 bar
1,0 bar
1219 m
27,65 kg
28,60 kg
52,5 cm x 28 cm
15 mil
0,38 mm
0,3 bar
1,0 bar
914 m
25,58 kg
26,53 kg
52,5 cm x 28 cm
Wall thickness
Max
pressure
0,7 bar
0,8 bar
Reel
length
4200 m
3048 m
Reel
weight
31,85 kg
27,21 kg
Reel gross Reel dimensions
weight*
(Ø X h)
32,80 kg
52,5 cm x 28 cm
28,16 kg
52,5 cm x 28 cm
*Gross weight includes packaging and pallet weight
Quantity of reels
Container
20’
Container
40’ HC
Truck
13,6 m
280
704
768
Pallet
Q.ty of reels
Dimensions (lxpxh)
16
105x105x128 cm
Short reels
Nominal
diameter
16 mm (5/8”)
Internal
diameter
16,1 mm
6 mil
0,15 mm
Min
pressure
0,3 bar
6 mil
8 mil
0,15 mm
0,20 mm
0,3 bar
0,3 bar
0,8 bar
1,0 bar
700 m
250 m
8,3 kg
3,4 kg
8,6 kg
3,6 kg
52,5 cm x 10 cm
39,5 cm x 8,2 cm
8 mil
0,20 mm
0,3 bar
1,0 bar
600 m
9,5 kg
9,8 kg
52,5 cm x 10 cm
Wall thickness
Max
pressure
0,8 bar
Reel
length
400 m
Reel
weight
4,1 kg
Reel gross Reel dimensions
weight*
(Ø X h)
4,3 kg
39,5 cm x 8,2 cm
Tape and Dripline
10
Quantity of reels
Master PalletContainerContainer Truck
pack
20’
40’ HC
13,6 m
250 m / 400 m
4
600 m / 700 m
3 48 840 2.1122.304
120 1.4403.0003.360
Dimensions (lxpxh)
Pallet
80x120x175 cm
Installation
The double “blue” stripe must always face up during installation for warranty
validity;
Aqua-TraXX® can be installed underground, under black plastic film/mulch or on
the surface;
During installation avoid pulling, cutting, perforating or tearing it;
If the soil is infested with insects which can damage the tube then some form of soil
treatment must be considered;
To avoid clogging, flush the main and secondary lines before connecting Aqua-TraXX®;
When installing underground or under mulch, pressurize Aqua-TraXX® within 12 hours;
Use only water-soluble fertilizers and flush the lines of residues before terminating irrigation;
It is advisable to mount vacuum breaker valves on the sub mains to avoid the possibility of impurities being
sucked back through the outlets of the Aqua-TraXX® during shutdown of the system;
When using transparent mulch, Aqua-TraXX® must be laid underground. Drops of condensate on the bottom
of the plastic may act as a magnifying glass, concentrating sunlight and possibly leading to holes.
11
Tape and Dripline
Aqua-TraXX® FC
he new Toro Aqua-Traxx® Flow
T
Control (FC) drip tape is the latest
advancement in the evolution of
precision drip irrigation. It’s the only
flow - controlling drip tape available
- giving you more control and
uniformity wherever you farm.
Aqua-TraXX® FC is the only drip tape
on the market able to guarantee
precise uniform water and nutrient
distribution even in the most difficult
topographical conditions.
Range
Aqua-TraXX® FC is available in the
following models:
- Wall thickness
6/8/10/12/15 mil
The exclusive flow path design, with
PBX technology (Proportionally
Balance Cross Section), guarantees
exceptional performance and very
high emission uniform. The emitter
has been designed to minimize
sensitivity of the flow to pressure
variations for a relatively constant
flow rate even in the toughest
working conditions.
- Wall thickness
8/10/12/15 mil
Emitters spacing
15/20/30/40/45/60 cm
Tape and Dripline
3 emitters
- 0,51 l/h @ 0,7 bar
- 0,76 l/h @ 0,7 bar
- 1,01 l/h @ 0,7 bar
12
Aqua-TraXX® FC guarantees even
greater water, energy and fertiliser
savings, giving optimum results even
on land once considered marginal.
Main features
The constant quest for innovative solutions able to
satisfy even the toughest irrigation requirements has
led to development of a drip tape with exceptional
characteristics:
Low sensitivity of the emitter flow to pressure
variations (Exponent X: 0.30);
High resistance to clogging thanks to PBX flow path
design;
Extraordinary efficiency, allowing long lateral lines
with very uniform water distribution and therefore
high crop uniformity;
Durability and excellent reliability achieved through
meticulous design and constant, precise control of the
extrusion process;
Three-holes outlet section made using laser technology;
An inlet filter prevents sediment deposits from entering
the emitter;
Excellent CV (Coefficient of Variation) thanks to
the precision of the flow path which guarantees a
completely turbulent flow;
Double blue stripes for easy identification;
Single extrusion process, guaranteeing uniform
dimensions and mechanical characteristics
(no welding, no seams);
Product identification
code printed on
tube with laser
technology.
Aqua-TraXX® FC
Applications
Aqua-TraXX® FC is ideal for
irrigating extensive and
horticultural crops where:
The topographical conditions
are particularly difficult, such as
uneven land, hills and marginal
areas;
Individual emitter
flow rate (l/h) @
0,7 bar
Flow rate per
meter (l/h/m) @
0,7 bar
EAFCXxx0690-yyy 15
1,01
6,73
EAFCXxx0867-yyy
20
1,01
5,05
EAFCXxx1245-yyy
30
1,01
3,37
EAFCXxx1634-yyy
40
1,01
2,53
EAFCXxx1830-yyy
45
1,01
2,24
EAFCXxx2422-yyy
60
1,01
1,68
Emitter
Spacing
(cm)
Required
Filtration
mesh
Emitter
Exponent
150
0,3
150
0,3
Emitter (0,51 l/h)150
0,3
Code
Emitter (1,01 l/h) Emitter (0,76 l/h) EAFCXxx0667-yyy 15
0,76
5,07
EAFCXxx0850-yyy
20
0,76
3,80
EAFCXxx1234-yyy
30
0,76
2,53
EAFCXxx1625-yyy
40
0,76
1,90
EAFCXxx1822-yyy
45
0,76
1,69
EAFCXxx2417-yyy
60
0,76
1,27
EAFCXxx1222-yyy
30
0,51
1,70
EAFCXxx2411-yyy
60
0,51
0,85
Codification
EAFC 5 10 08 34 - 750
Reel length
in feet / 10
ID for Aqua-TraXX® FC
Internal diameter in eighths
of an inch: 5/8” (16 mm)
Flow rate in US Gal /
min/ 100
10 mil (0,25 mm)
Tape and Dripline
Where particularly long or sloping
lateral lines are required.
Emitter spacing in inches:
8” (20 cm)
13
Aqua-TraXX® FC
Performance
The following tables indicate the maximum length of the lines in relation to
inlet water pressure.
Note:
In determining the maximum length, the maximum inlet pressure as indicated
in the “Technical Data” table must be respected.
Code
Individual Emitter
flow rate
@ 0,7 bar
Emitter
Spacing
Emission
Uniformity
(EU)
Maximum lateral lenghts in meters
@ 0,7 bar
@ 1,0 bar
@ 1,4 bar
EAFC5xx0690-yyy 1,01 l/h
15 cm
90%
124
131
139
@ 1,7 bar
145
20 cm
90%
148
157
168
174
30 cm
90%
194
206
216
226
40 cm
90%
230
245
260
271
45 cm
90%
248
267
280
289
60 cm
90%
301
320
337
350
15 cm
90%
150
159
168
175
20 cm
90%
181
193
202
211
30 cm
90%
232
247
262
273
40 cm
90%
283
299
317
325
45 cm
90%
303
320
339
352
60 cm
90%
364
387
411
423
30 cm
90%
306
328
348
360
60 cm
90%
475
505
535
554
Individual Emitter
flow rate
@ 0,7 bar
Code
Tape and Dripline
EAFC7xx0867-yyy 14
1,01 l/h
Emitter
Spacing
15 cm
20 cm
Emission
Uniformity
(EU)
90%
90%
Maximum lateral lenghts in meters
@ 0,7 bar
@ 1,0 bar
@ 1,4 bar
@ 1,7 bar
217
230
244
255
261
277
294
305
30 cm
90%
336
361
384
398
40 cm
90%
404
430
458
474
45 cm
90%
438
466
494
511
60 cm
90%
526
556
590
610
15 cm
90%
263
279
296
306
20 cm
90%
318
337
355
368
30 cm
90%
412
436
463
480
40 cm
90%
497
525
554
575
45 cm
90%
528
564
595
619
60 cm
90%
633
674
718
740
30 cm
90%
538
573
609
629
60 cm
90%
840
888
939
970
Aqua-TraXX® FC
Technical data and logistics
Nominal
Diameter
Internal
Diameter
16 mm (5/8”)
16,1 mm
22 mm (7/8”)
22,3 mm
Wall Thickness
6 mil
8 mil
10 mil
12 mil
15 mil
8 mil
10 mil
12 mil
15 mil
0,15 mm
0,20 mm
0,25 mm
0,30 mm
0,38 mm
0,20 mm
0,25 mm
0,30 mm
0,38 mm
Min
Pressure
Max
Pressure
Reel
Lenght
Reel
Weight
0,3 bar
0,3 bar
0,3 bar
0,3 bar
0,3 bar
0,3 bar
0,3 bar
0,3 bar
0,3 bar
1,1 bar
1,1 bar
1,7 bar
1,7 bar
1,7 bar
1,0 bar
1,4 bar
1,4 bar
1,5 bar
3048 m
2286 m
1828 m
1554 m
1220 m
1828 m
1341 m
1219 m
914 m
28,05 kg
29,05 kg
28,05 kg
28,05 kg
28,05 kg
32,05 kg
31,05 kg
32,05 kg
29,05 kg
Reel Gross Reel Dimensions
Weight*
(Ø X h)
29 kg
30 kg
29 kg
29 kg
29 kg
33 kg
32 kg
33 kg
30 kg
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
Quantity of reels
Container
20’
Container
40’ HC
Truck
13,6 m
280
704
768
Q.ty of reels
Pallet
16
Dimensions (lxpxh)
105x105x128 cm
Installation
The double “blue” stripe must always face up during installation for
warranty validity;
If the soil is infested with insects which can damage the tube then some form
of soil treatment must be considered;
To avoid clogging, flush the main and secondary lines before connecting Aqua-TraXX®;
When installing underground or under mulch, pressurize Aqua-TraXX® within 12 hours;
Use only water-soluble fertilizers and flush the lines of residues before terminating irrigation;
It is advisable to mount vacuum breaker valves on the sub mains to avoid the possibility of impurities
being sucked back through the outlets of the Aqua-TraXX® during shutdown of the system;
When using transparent mulch, Aqua-TraXX® must be laid underground. Drops of condensate on the
bottom of the plastic may act as a magnifying glass, concentrating sunlight and possibly leading to holes.
Tape and Dripline
Aqua-TraXX® can be installed underground, under black plastic film/mulch
or on the surface;
15
Neptune
eptune dripline with flat emitter is
N
designed for irrigating multi-year and
seasonal crops.
The turbulent emitter with its wide flow
path gives Neptune high resistance to
clogging. The use of top-quality polymers
ensures high durability and resistance to
possible mechanical damage.
Range
The flat emitter is extremely versatile, making it possible
to offer Neptune in a complete range of configurations
with different spacing and wall thickness (up to 30 mil /
0,75 mm)
Neptune has been designed and produced
according to the highest possible quality
standards and represents an accessible but
top performance economic investment.
- Wall thickness 6/8/10/12/15/16/18/20/24/30 mil
- Wall thickness 8/10/12/15/16/18/20/24/30 mil
Emitter spacing 20/30/40/50/60 cm
(other spacing available on request)
Grouped spacing (optional)
Tape and Dripline
5 different emitters
- 0,67 l/h @ 0,7 bar (0,8 l/h @ 1 bar)
- 1,08 l/h @ 0,7 bar (1,3 l/h @ 1 bar)
- 1,30 l/h @ 0,7 bar (1,5 l/h @ 1 bar)
- 1,99 l/h @ 0,7 bar (2,4 l/h @ 1 bar)
- 3,16 l/h @ 0,7 bar (3,8 l/h @ 1 bar)
16
Main features
Advanced production technology and superior quality
standards define the characteristics of Neptune:
An inlet filter prevents sediment deposits from
entering the emitter;
Outlet hole made using precision mechanical
technology;
High efficiency for uniform delivery to all plants;
High durability even in the most difficult conditions;
High reliability achieved through precise and constant
production process control;
High resistance to clogging, thanks to the turbulent
emitter with wide flow path;
Blue stripe for easy identification;
Extrusion process with simultaneous insertion of
the emitter to guarantee uniform dimensions and
mechanical characteristics (no welding, no
seams);
Product identification code
printed on tube with
laser technology.
Neptune
Code
Neptune is particularly suitable for
irrigating:
Extensive crops: corn, cotton, sorghum,
sugar beet, tobacco;
Horticultural crops:
- Solanaceae (tomatoes, potatoes,
peppers, aubergines);
- Brassicaceae (cauliflower, broccoli,
cabbage);
- Asteraceae (artichokes, lettuce,
chicory);
- Cucurbitaceae (courgettes, melons,
water melons, cucumbers, pumpkins);
- Liliaceae (asparagus, onions, garlic,
leeks, shallots);
- Umbelliferae (fennel, parsley, celery);
Small fruit: strawberries, bilberries,
raspberries, blackberries, blackcurrants;
Medicinal plants
Emitter
spacing
(cm)
Emitter (3,16 l/h)
PTWXXxx2032-yy
PTWXXxx3032-yy
PTWXXxx4032-yy
PTWXXxx5032-yy
PTWXXxx6032-yy
Emitter (1,99 l/h)
PTWXXxx2020-yy
PTWXXxx3020-yy
PTWXXxx4020-yy
PTWXXxx5020-yy
PTWXXxx6020-yy
Emitter (1,30 l/h)
PTWXXxx2014-yy
PTWXXxx3014-yy
PTWXXxx4014-yy
PTWXXxx5014-yy
PTWXXxx6014-yy
Emitter (1,08 l/h)
PTWXXxx2011-yy
PTWXXxx3011-yy
PTWXXxx4011-yy
PTWXXxx5011-yy
PTWXXxx6011-yy
Emitter (0,67 l/h)
PTWXXxx2006-yy
PTWXXxx3006-yy
PTWXXxx4006-yy
PTWXXxx5006-yy
PTWXXxx6006-yy
Individual emitter
flow rate
(l/h) @
0,7 bar 1,0 bar
Flow rate
per meter
(l/h/m) @
0,7 bar 1,0 bar
Required
Filtration
mesh
120
20
30
40
50
60
3,16
3,16
3,16
3,16
3,16
3,80
3,80
3,80
3,80
3,80
15,80
10,53
7,90
6,32
5,27
19,00
12,67
9,50
7,60
6,33
20
30
40
50
60
1,99
1,99
1,99
1,99
1,99
2,40
2,40
2,40
2,40
2,40
9,95
6,63
4,98
3,98
3,32
12,00
8,00
6,00
4,80
4,00
20
30
40
50
60
1,30
1,30
1,30
1,30
1,30
1,50
1,50
1,50
1,50
1,50
6,50
4,33
3,25
2,60
2,17
7,50
5,00
3,75
3,00
2,50
20
30
40
50
60
1,08
1,08
1,08
1,08
1,08
1,30
1,30
1,30
1,30
1,30
5,40
3,60
2,70
2,16
1,80
6,50
4,33
3,25
2,60
2,17
20
30
40
50
60
0,67
0,67
0,67
0,67
0,67
0,80
0,80
0,80
0,80
0,80
3,35
2,23
1,68
1,34
1,12
4,00
2,67
2,00
1,60
1,33
120
120
120
120
Available emitters
Flow rate l/h @ 1 bar
0.80 1.30
1.50
2.40
3.80
Flow rate l/h @ 0.7 bar 0.67 1.08
1.30
1.99
3.16
14
20
32
Emitter code
06
11
Codification
PTW 16 08 40 11 - 24
Reel length in
meters / 100
ID for Neptune
Nominal diameter in mm:
16 mm (5/8”)
Emitter code
8 mil (0,20 mm)
Tape and Dripline
Applications
Emitter spacing in cm:
40 cm
17
Neptune
Performance
The following tables indicate the maximum length of the lines in relation
to inlet water pressure.
Note:
In determining the maximum length, the maximum inlet pressure as
indicated in the “Technical Data” table must be respected.
Tape and Dripline
Diameter 16 mm (5/8”) - Slope 0%
Model
Individual
emitter flow
rate @ 0,7 bar
Emitter
spacing
PTW16xx2032-yy
3,16 l/h
20 cm
PTW16xx3032-yy
3,16 l/h
30 cm
PTW16xx4032-yy
3,16 l/h
40 cm
PTW16xx5032-yy
3,16 l/h
50 cm
PTW16xx6032-yy
3,16 l/h
60 cm
PTW16xx2020-yy
1,99 l/h
20 cm
PTW16xx3020-yy
1,99 l/h
30 cm
PTW16xx4020-yy
1,99 l/h
40 cm
PTW16xx5020-yy
1,99 l/h
50 cm
PTW16xx6020-yy
1,99 l/h
60 cm
PTW16xx2014-yy
1,30 l/h
20 cm
PTW16xx3014-yy
1,30 l/h
30 cm
PTW16xx4014-yy
1,30 l/h
40 cm
PTW16xx5014-yy
1,30 l/h
50 cm
PTW16xx6014-yy
1,30 l/h
60 cm
PTW16xx2011-yy
1,08 l/h
20 cm
PTW16xx3011-yy
1,08 l/h
30 cm
PTW16xx4011-yy
1,08 l/h
40 cm
PTW16xx5011-yy
1,08 l/h
50 cm
PTW16xx6011-yy
1,08 l/h
60 cm
PTW16xx2006-yy
0,67 l/h
20 cm
PTW16xx3006-yy
0,67 l/h
30 cm
PTW16xx4006-yy
0,67 l/h
40 cm
PTW16xx5006-yy
0,67 l/h
50 cm
PTW16xx6006-yy
0,67 l/h
60 cm
Emission
uniformity
(EU)
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
@ 0,7 bar
54
50
72
67
88
81
103
95
116
107
78
72
104
96
126
116
147
135
166
153
98
90
130
120
159
146
185
170
208
192
114
105
152
140
185
171
215
198
243
224
169
155
225
207
273
251
318
292
358
330
@ 0,8 bar
60
50
80
67
98
81
114
95
128
107
86
72
115
96
140
117
162
136
183
153
108
91
144
121
175
147
216
171
230
193
122
106
162
141
205
171
238
199
268
224
187
156
249
208
301
252
350
294
395
331
@ 0,9 bar
64
50
85
67
103
82
120
95
136
107
91
72
121
96
148
117
172
136
194
154
115
91
153
121
186
147
216
171
244
193
134
106
178
141
217
172
251
200
285
225
197
156
263
208
320
253
371
294
419
332
@ 1,0 bar @ 1,5 bar
64
64
50
51
85
85
6768
103104
82
83
120
121
95
96
136
137
108
109
92
92
72
73
122
123
96
97
148
150
117119
172
174
136138
195
197
154
156
113
116
91
92
150
154
121
122
186188
148
149
217
219
171
173
245
247
194
195
134135
106
107
179
180
141
143
218
219
172174
252
255
200
202
286
288
226
228
198200
157
158
264
266
209
210
321
323
253240
372
376
295
299
420
425
333
335
Line length values relating to 85% emission uniformity represent the maximum values obtainable. Correct water delivery is not guaranteed
for lengths above those indicated.
The above performance are valid for all thicknesses up to 30 mil.
Other emitter spacing available on request.
18
Neptune
Diameter 22 mm (7/8”) - Slope 0%
Individual
emitter flow
rate @ 0,7 bar
Emitter
spacing
PTW22xx2032-yy
3,16 l/h
20 cm
PTW22xx3032-yy
3,16 l/h
30 cm
PTW22xx4032-yy
3,16 l/h
40 cm
PTW22xx5032-yy
3,16 l/h
50 cm
PTW22xx6032-yy
3,16 l/h
60 cm
PTW22xx2020-yy
1,99 l/h
20 cm
PTW22xx3020-yy
1,99 l/h
30 cm
PTW22xx4020-yy
1,99 l/h
40 cm
PTW22xx5020-yy
1,99 l/h
50 cm
PTW22xx6020-yy
1,99 l/h
60 cm
PTW22xx2014-yy
1,30 l/h
20 cm
PTW22xx3014-yy
1,30 l/h
30 cm
PTW22xx4014-yy
1,30 l/h
40 cm
PTW22xx5014-yy
1,30 l/h
50 cm
PTW22xx6014-yy
1,30 l/h
60 cm
PTW22xx2011-yy
1,08 l/h
20 cm
PTW22xx3011-yy
1,08 l/h
30 cm
PTW22xx4011-yy
1,08 l/h
40 cm
PTW22xx5011-yy
1,08 l/h
50 cm
PTW22xx6011-yy
1,08 l/h
60 cm
PTW22xx2006-yy
0,67 l/h
20 cm
PTW22xx3006-yy
0,67 l/h
30 cm
PTW22xx4006-yy
0,67 l/h
40 cm
PTW22xx5006-yy
0,67 l/h
50 cm
PTW22xx6006-yy
0,67 l/h
60 cm
Emission
uniformity
(EU)
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
85%
90%
@ 0,7 bar
95
87
126
116
154
142
180
166
203
188
135
125
180
166
220
203
256
237
290
269
170
157
226
209
276
256
322
297
365
337
198
183
264
244
322
299
376
348
425
394
292
271
389
361
458
441
540
513
626
580
@ 0,8 bar
104
87
139
116
170
142
198
166
224
188
149
125
198
167
243
204
285
238
321
269
182
157
243
209
305
256
356
299
403
338
213
184
284
245
356
299
415
349
470
395
323
2716
430
3621
525
442
595
515
676
582
@ 0,9 bar
110
87
147
116
180
143
210
167
238
189
158
125
211
167
258
204
301
238
341
270
199
158
265
210
325
257
378
300
428
339
233
184
310
245
379
300
441
350
499
396
343
272
457
362
559
443
650
516
735
584
@ 1,0 bar @ 1,5 bar
110
111
88
88
147
148
117
117
181
182
143144
211
212
167
168
239
241
189
190
158160
125
126
211
213
167
168
259
261
205206
302
304
239240
342
344
271
273
200
201
158
159
266268
211
212
325
328
258
259
379
383
300302
429
433
340
342
233234
185
185
310
312
246
247
379
382
300302
442
446
351
352
501
505
397
399
344347
272
274
458
462
363
365
559
565
444446
652
658
517
519
739
744
585
590
Line length values relating to 85% emission uniformity represent the maximum values obtainable. Correct water delivery is not guaranteed
for lengths above those indicated.
The above performance are valid for all thicknesses up to 30 mil.
Tape and Dripline
Model
19
Neptune
Nominal
diameter
16 mm (5/8”)
22 mm (7/8”)
Internal
diameter
16,1 mm
22,3 mm
Wall thickness
Max
pressure
6 mil
8 mil
10 mil
12 mil
15 mil
16 mil
18 mil
20 mil
24 mil
30 mil
8 mil
10 mil
0,15 mm
0,20 mm
0,25 mm
0,30 mm
0,38 mm
0,40 mm
0,45 mm
0,50 mm
0,60 mm
0,75 mm
0,20 mm
0,25 mm
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,8 bar
1,0 bar
1,0 bar
1,0 bar
1,0 bar
1,5 bar
2,0 bar
2,0 bar
2,0 bar
3,0 bar
0,8 bar
1,0 bar
12 mil
0,30 mm
0,41 bar
1,0 bar
15 mil
0,38 mm
0,41 bar
1,0 bar
16 mil
0,40 mm
0,41 bar
1,0 bar
18 mil
0,45 mm
0,41 bar
1,5 bar
20 mil
0,50 mm
0,41 bar
1,5 bar
24 mil
0,60 mm
0,41 bar
2,0 bar
30 mil
0,75 mm
0,41 bar
2,5 bar
Container
20’
Quantity of reels
Min
pressure
280
Container Truck
40’ HC
13,6 m
704
768
Q.ty of reels
Tape and Dripline
Pallet
16
Installation
The “blue” stripe must always face up during installation for warranty
validity;
Neptune can be installed underground, under black plastic film/mulch or
on the surface;
If the soil is infested with insects which can damage the tube then some
form of soil treatment must be considered;
To avoid clogging, flush the main and secondary lines before connecting Neptune;
When installing underground or under mulch, pressurize Neptune within 12 hours;
Use only water-soluble fertilizers and flush the lines of residues before terminating irrigation.
It is advisable to mount vacuum breaker valves on the sub mains to avoid the possibility of impurities
being sucked back through the outlets of the Neptune during shutdown of the system;
When using transparent mulch, Neptune must be laid underground. Drops of condensate on the bottom
of the plastic may act as a magnifying glass, concentrating sunlight and possibly leading to holes.
20
Neptune
16 mm (5/8”)
22 mm (7/8”)
Wall
thickness
Emitter
spacing
Reel
length
Reel
weight
Reel gross
weight*
6 mil
6 mil
6 mil
6 mil
6 mil
8 mil
8 mil
8 mil
8 mil
8 mil
10 mil
10 mil
10 mil
10 mil
10 mil
12 mil
12 mil
12 mil
12 mil
12 mil
15 mil
15 mil
15 mil
15 mil
15 mil
18 mil
18 mil
18 mil
18 mil
18 mil
20 mil
20 mil
20 mil
20 mil
20 mil
24 mil
24 mil
24 mil
24 mil
24 mil
24 mil
30 mil
30 mil
30 mil
30 mil
30 mil
30 mil
8 mil
8 mil
8 mil
8 mil
8 mil
10 mil
10 mil
10 mil
10 mil
10 mil
12 mil
12 mil
12 mil
12 mil
12 mil
15 mil
15 mil
15 mil
15 mil
15 mil
20 mil
20 mil
20 mil
20 mil
20 mil
24 mil
24 mil
24 mil
24 mil
24 mil
30 mil
30 mil
30 mil
30 mil
30 mil
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
25 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
33 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
20 cm
30 cm
40 cm
50 cm
60 cm
2700 m
3200 m
3200 m
3200 m
3200 m
2200 m
2400 m
2400 m
2400 m
2400 m
1700 m
1900 m
1900 m
1900 m
1900 m
1300 m
1500 m
1500 m
1500 m
1500 m
1200 m
1300 m
1300 m
1300 m
1300 m
950 m
950 m
950 m
950 m
950 m
750 m
750 m
750 m
750 m
750 m
600 m
600 m
600 m
600 m
600 m
600 m
400 m
400 m
400 m
400 m
400 m
400 m
1900 m
2100 m
2100 m
2100 m
2100 m
1300 m
1500 m
1600 m
1600 m
1600 m
1200 m
1300 m
1300 m
1300 m
1300 m
800 m
850 m
850 m
900 m
900 m
450 m
450 m
450 m
450 m
450 m
350 m
350 m
350 m
350 m
350 m
300 m
300 m
300 m
300 m
300 m
21,9 kg
25,1 kg
24,8 kg
24,8 kg
24,8 kg
23,5 kg
24,9 kg
24,7 kg
24,7 kg
24,7 kg
22,4 kg
24,5 kg
24,4 kg
24,4 kg
24,4 kg
20,7 kg
23,3 kg
23,2 kg
23,2 kg
23,2 kg
23,4 kg
25,2 kg
25,1 kg
25,0 kg
25,0 kg
22,4 kg
22,2 kg
22,1 kg
22,1 kg
22,1 kg
19,8 kg
19,6 kg
19,5 kg
19,4 kg
19,3 kg
21,9 kg
21,9 kg
21,9 kg
21,9 kg
21,9 kg
21,9 kg
17,8 kg
17,8 kg
17,8 kg
17,8 kg
17,8 kg
17,8 kg
27,2 kg
29,6 kg
29,4 kg
29,3 kg
29,3 kg
23,3 kg
26,4 kg
28,0 kg
27,9 kg
27,9 kg
25,5 kg
27,4 kg
27,3 kg
27,2 kg
27,2 kg
22,7 kg
22,5 kg
22,4 kg
23,7 kg
23,7 kg
19,4 kg
19,4 kg
19,4 kg
19,4 kg
19,4 kg
18,0 kg
18,0 kg
18,0 kg
18,0 kg
18,0 kg
18,9 kg
18,9 kg
18,9 kg
18,9 kg
18,9 kg
22,85 kg
26,05 kg
25,75 kg
25,75 kg
25,75 kg
24,45 kg
25,85 kg
25,65 kg
25,65 kg
25,65 kg
23,35 kg
25,45 kg
25,35 kg
25,35 kg
25,35 kg
21,65 kg
24,25 kg
24,15 kg
24,15 kg
24,15 kg
24,35 kg
26,15 kg
26,05 kg
25,95 kg
25,95 kg
23,35 kg
23,15 kg
23,05 kg
23,05 kg
23,05 kg
20,75 kg
20,55 kg
20,45 kg
19,35 kg
19,25 kg
22,85 kg
22,85 kg
22,85 kg
22,85 kg
22,85 kg
22,85 kg
18,75 kg
18,75 kg
18,75 kg
18,75 kg
18,75 kg
18,75 kg
28,15 kg
30,55 kg
30,35 kg
30,25 kg
30,25 kg
24,25 kg
27,35 kg
28,95 kg
28,85 kg
28,85 kg
26,45 kg
28,35 kg
28,25 kg
28,15 kg
28,15 kg
23,65 kg
23,45 kg
23,35 kg
24,65 kg
24,65 kg
20,35 kg
20,35 kg
20,35 kg
20,35 kg
20,35 kg
18,95 kg
18,95 kg
18,95 kg
18,95 kg
18,95 kg
19,85 kg
19,85 kg
19,85 kg
19,85 kg
19,85 kg
Reel dimensions
(Ø X h)
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
52,5 cm x 28 cm
Tape and Dripline
Nominal
diameter
21
Neptune HW
eptune HW dripline with flat emitter is
designed for irrigating multi-year and
N
seasonal crops.
The turbulent emitter with its wide flow
path gives Neptune HW high resistance to
clogging. The use of top-quality polymers
ensures high durability and resistance to
possible mechanical damage
Range
The five flat emitters, the two diameters, the different
wall thickness and emitters spacing making it
possible to offer Neptune HW in a complete range of
configurations:
Neptune HW has been designed and
produced according to the highest quality
standards and represents an accessible but
top performance economic investment.
Diameter 16 mm (I.D. 13,8 mm)
- Wall thickness 35 mil (0,9 mm)
Diameter 20 mm (I.D. 17,6 mm)
Emitters spacing:
25/30/40/50/60/70/75/80/90/100 cm
(other spacing available on request)
Tape and Dripline
Grouped spacing (optional)
22
5 different emitters:
- 0,67 l/h @ 0,7 bar (0,8 l/h @ 1 bar)
- 1,08 l/h @ 0,7 bar (1,3 l/h @ 1 bar)
- 1,30 l/h @ 0,7 bar (1,5 l/h @ 1 bar)
- 1,99 l/h @ 0,7 bar (2,4 l/h @ 1 bar)
- 3,16 l/h @ 0,7 bar (3,8 l/h @ 1 bar)
Main features
Neptune HW utilizes an emitter that guarantee high
durability and efficiency in the most demanding
conditions.
Neptune HW has the following characteristics:
Outlet hole made using precision mechanical technology;
The high efficiency allows long lateral lines with very high
emission uniformity;
(shorter laying installation times and therefore lower
labor costs and less risk of damaging the product);
Excellent CV (Coefficient of Variation);
Very high resistance to clogging, thanks to the design of
the emitter, optimized for use over a number of years:
Product identification code printed on tube;
An inlet filter prevents sediment deposits from entering
the emitter;
Extrusion process with simultaneous
insertion of the emitter to guarantee
uniform dimensions and
mechanical characteristics
(no welding, no seams).
Neptune HW
Code
The Neptune HW dripline is ideal for
irrigating permanent and seasonal crops
such as:
- Vitaceae (wine and table grapes);
- Oleaceae (olive);
- Rosaceae (apples, pears, plums,
damsons, peaches, apricots, cherries,
cherry plums, almonds, medlars,
quinces);
- Rutaceae (oranges, lemons,
clementines, citrons, grapefruit,
tangerines, limes, mapo, pomelo);
- Corylaceae (hazelnuts);
- Juglandaceae (walnuts, pecans);
- Actinidiaceae (kiwi);
- Anarcadiaceae (pistachio, mango,
cashew);
- Punicaceae (pomegranate);
- Ebanaceae (persimmon);
- Musaceae (banana);
- Rubiaceae (coffee);
- Sterculiaceae (cocoa)
- Moraceae (figs);
- Aracaceae (coconut, dates);
- Lauraceae (avocado);
- Caricaceae (papaya);
- Small fruits (bilberry, blackberry).
Codification
Emitter (3,16 l/h)
PTWXXxx2532-yy
PTWXXxx3032-yy
PTWXXxx4032-yy
PTWXXxx5032-yy
PTWXXxx6032-yy
PTWXXxx7032-yy
PTWXXxx7532-yy
PTWXXxx8032-yy
PTWXXxx9032-yy
PTWXXxx10032-yy
Emitter (1,99 l/h)
PTWXXxx2520-yy
PTWXXxx3020-yy
PTWXXxx4020-yy
PTWXXxx5020-yy
PTWXXxx6020-yy
PTWXXxx7020-yy
PTWXXxx7520-yy
PTWXXxx8020-yy
PTWXXxx9020-yy
PTWXXxx10020-yy
Emitter (1,30 l/h)
PTWXXxx2514-yy
PTWXXxx3014-yy
PTWXXxx4014-yy
PTWXXxx5014-yy
PTWXXxx6014-yy
PTWXXxx7014-yy
PTWXXxx7514-yy
PTWXXxx8014-yy
PTWXXxx9014-yy
PTWXXxx10014-yy
Emitter (1,08 l/h)
PTWXXxx2511-yy
PTWXXxx3011-yy
PTWXXxx4011-yy
PTWXXxx5011-yy
PTWXXxx6011-yy
PTWXXxx7011-yy
PTWXXxx7511-yy
PTWXXxx8011-yy
PTWXXxx9011-yy
PTWXXxx10011-yy
Emitter (0,67 l/h)
PTWXXxx2506-yy
PTWXXxx3006-yy
PTWXXxx4006-yy
PTWXXxx5006-yy
PTWXXxx6006-yy
PTWXXxx7006-yy
PTWXXxx7506-yy
PTWXXxx8006-yy
PTWXXxx9006-yy
PTWXXxx10006-yy
Emitter
Spacing
(cm)
Individual
emitter flow
rate (l/h) @
0,7 bar 1,0 bar
Flow rate per Required
meter (l/h/m) @ Filtration
mesh
0,7 bar 1,0 bar
25
30
40
50
60
70
75
80
90
100
3,16
3,16
3,16
3,16
3,16
3,16
3,16
3,16
3,16
3,16
3,80
3,80
3,80
3,80
3,80
3,80
3,80
3,80
3,80
3,80
12,64
10,53
7,90
6,32
5,27
4,51
4,21
3,95
3,51
3,16
15,20
12,67
9,50
7,60
6,33
5,43
5,07
4,75
4,22
3,80
25
30
40
50
60
70
75
80
90
100
1,99
1,99
1,99
1,99
1,99
1,99
1,99
1,99
1,99
1,99
2,40
2,40
2,40
2,40
2,40
2,40
2,40
2,40
2,40
2,40
7,96
6,63
4,98
3,98
3,32
2,84
2,65
2,49
2,21
1,99
9,60
8,00
6,00
4,80
4,00
3,43
3,20
3,00
2,67
2,40
25
30
40
50
60
70
75
80
90
100
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
5,20
4,33
3,25
2,60
2,17
1,86
1,73
1,63
1,44
1,30
6,00
5,00
3,75
3,00
2,50
2,14
2,00
1,88
1,67
1,50
25
30
40
50
60
70
75
80
90
100
1,08
1,08
1,08
1,08
1,08
1,08
1,08
1,08
1,08
1,08
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
1,30
4,32
3,60
2,70
2,16
1,80
1,54
1,44
1,35
1,20
1,08
5,20
4,33
3,25
2,60
2,17
1,86
1,73
1,63
1,44
1,30
25
30
40
50
60
70
75
80
90
100
0,67
0,67
0,67
0,67
0,67
0,67
0,67
0,67
0,67
0,67
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
0,80
2,68
2,23
1,68
1,34
1,12
0,96
0,89
0,84
0,74
0,67
3,20
2,67
2,00
1,60
1,33
1,14
1,07
1,00
0,89
0,80
120
120
120
120
120
Available emitters
PTW 16 35 60 20 – 5.0
ID for Neptune
Nominal Diameter in
mm: 16 mm
Wall thickness in mil (without
decimal point): 35 mil (0,9 mm)
Coil lenght in
meters /100
Emitter Code
Flow rate in l/h @ 1 bar 0.80
Flow rate in l/h @ 0,7 bar 0.67
Emitter code
06
1.30 1.50
1.08 1.30
11
14
2.40
1.99
20
3.80
3.16
32
Tape and Dripline
Applications
Emitters spacing
in cm: 60 cm
23
Neptune HW
Performance
Tape and Dripline
The following tables indicate the
maximum length of the lines in relation
Note:
In determining the maximum length,
the maximum inlet pressure as
indicated in the “Technical Data” table
must be respected.
24
Diameter 16 mm - Slope 0%
Code
PTW16xx2532-yy
PTW16xx3032-yy
PTW16xx4032-yy
PTW16xx5032-yy
PTW16xx6032-yy
PTW16xx2520-yy
PTW16xx3020-yy
PTW16xx4020-yy
PTW16xx5020-yy
PTW16xx6020-yy
PTW16xx2514-yy
PTW16xx3014-yy
PTW16xx4014-yy
PTW16xx5014-yy
PTW16xx6014-yy
PTW16xx2511-yy
PTW16xx3011-yy
PTW16xx4011-yy
PTW16xx5011-yy
PTW16xx6011-yy
PTW16xx2506-yy
PTW16xx3006-yy
PTW16xx4006-yy
PTW16xx5006-yy
PTW16xx6006-yy
Individual emitter
flow rate
@ 0,7 bar
3,16 l/h 3,16 l/h 3,16 l/h 3,16 l/h 3,16 l/h 1,99 l/h 1,99 l/h 1,99 l/h 1,99 l/h 1,99 l/h 1,30 l/h 1,30 l/h 1,30 l/h 1,30 l/h 1,30 l/h 1,08 l/h 1,08 l/h 1,08 l/h 1,08 l/h 1,08 l/h 0,67 l/h 0,67 l/h 0,67 l/h 0,67 l/h 0,67 l/h Maximum Lateral
Lenghts in meter
@ 1,0 bar
25 cm90%
46
30 cm90%
52
40 cm90%
63
50 cm90%
73
60 cm90%
83
25 cm90%
66
30 cm 90%
75
40 cm90%
91
50 cm90%
105
60 cm90%
119
25 cm 90%
83
30 cm90%
94
40 cm
90%
114
50 cm90%
132
60 cm90%
149
25 cm90%
98
30 cm90%
111
40 cm90%
135
50 cm90%
156
60 cm90%
176
25 cm 90%
143
30 cm
90%
162
40 cm90%
197
50 cm90%
228
60 cm
90%
257
Emitter
spacing
Emission
Uniformity
Diameter 20 mm - Slope 0%
Code
PTW20xx2532-yy
PTW20xx3032-yy
PTW20xx4032-yy
PTW20xx5032-yy
PTW20xx6032-yy
PTW20xx2520-yy
PTW20xx3020-yy
PTW20xx4020-yy
PTW20xx5020-yy
PTW20xx6020-yy
PTW20xx2514-yy
PTW20xx3014-yy
PTW20xx4014-yy
PTW20xx5014-yy
PTW20xx6014-yy
PTW20xx2511-yy
PTW20xx3011-yy
PTW20xx4011-yy
PTW20xx5011-yy
PTW20xx6011-yy
PTW20xx2506-yy
PTW20xx3006-yy
PTW20xx4006-yy
PTW20xx5006-yy
PTW20xx6006-yy
Individual emitter
flow rate
@ 0,7 bar
Emitter
spacing
3,16 l/h
3,16 l/h
3,16 l/h
3,16 l/h
3,16 l/h
1,99 l/h
1,99 l/h
1,99 l/h
1,99 l/h
1,99 l/h
1,30 l/h
1,30 l/h
1,30 l/h
1,30 l/h
1,30 l/h
1,08 l/h
1,08 l/h
1,08 l/h
1,08 l/h
1,08 l/h
0,67 l/h
0,67 l/h
0,67 l/h
0,67 l/h
0,67 l/h
25 cm
30 cm
40 cm
50 cm
60 cm
25 cm
30 cm
40 cm
50 cm
60 cm
25 cm
30 cm
40 cm
50 cm
60 cm
25 cm
30 cm
40 cm
50 cm
60 cm
25 cm
30 cm
40 cm
50 cm
60 cm
Emission
Uniformity
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
Maximum Lateral
Lenghts in meter
@ 1,0 bar
69
78
96
111
126
99
112
137
159
180
124
141
172
200
226
147
165
204
237
267
214
243
296
345
389
Irrloc software allows you to quickly design
your irrigation system even on hilly or
undulating terrains.
Through Irrloc, you can also design the
mainlines and you can display the emission
uniformity on both the later lines and irrigation
blocks.
Free Download: www.toro-ag.it.
Neptune HW
Internal
Diameter
16 mm
13,8 mm
20 mm
17,6 mm
Wall thickness
35 mil
39 mil
43 mil
35 mil
39 mil
47 mil
0,9 mm
1,0 mm
1,1 mm
0,9 mm
1,0 mm
1,2 mm
External
diameter
15,6 mm
15,8 mm
16,0 mm
19,4 mm
19,6 mm
20,0 mm
Min
Pressure
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
0,41 bar
Max
Pressure
3,5 bar
3,5 bar
4,0 bar
3,0 bar
3,0 bar
4,0 bar
Container Container Container
20’
40’
40’ HC
Quantity of coils
Nominal
diameter
Wall thickness
35 mil (0,9 mm)
16 mm
39 mil (1,0 mm)
43 mil (1,1 mm)
35 mil (0,9 mm)
20 mm
39 mil (1,0 mm)
47 mil (1,2 mm)
160
320
Truck
13,6 m
360
400
Emitter
spacing
Coil Lenght
Coil Weight
Coil Dimensions
(Øxh)
25 cm
500 m
23,3 kg
80 cm x 30 cm
30 cm
500 m
22,8 kg
80 cm x 30 cm
40 cm
500 m
22,3 kg
80 cm x 30 cm
50 cm
500 m
21,9 kg
80 cm x 30 cm
60 cm
500 m
21,7 kg
80 cm x 30 cm
25 cm
500 m
26,0 kg
80 cm x 30 cm
30 cm
500 m
25,4 kg
80 cm x 30 cm
40 cm
500 m
24,9 kg
80 cm x 30 cm
50 cm
500 m
24,4 kg
80 cm x 30 cm
60 cm
500 m
24,2 kg
80 cm x 30 cm
25 cm
500 m
28,6 kg
80 cm x 30 cm
30 cm
500 m
28,0 kg
80 cm x 30 cm
40 cm
500 m
27,4 kg
80 cm x 30 cm
50 cm
500 m
26,9 kg
80 cm x 30 cm
60 cm
500 m
26,6 kg
80 cm x 30 cm
25 cm
370 m
19,9 kg
80 cm x 30 cm
30 cm
370 m
19,5 kg
80 cm x 30 cm
40 cm
370 m
19,1 kg
80 cm x 30 cm
50 cm
370 m
18,8 kg
80 cm x 30 cm
60 cm
370 m
18,6 kg
80 cm x 30 cm
25 cm
350 m
22,0 kg
80 cm x 30 cm
30 cm
350 m
21,6 kg
80 cm x 30 cm
40 cm
350 m
21,2 kg
80 cm x 30 cm
50 cm
350 m
20,8 kg
80 cm x 30 cm
60 cm
350 m
20,6 kg
80 cm x 30 cm
25 cm
340 m
24,5 kg
80 cm x 30 cm
30 cm
340 m
24,1 kg
80 cm x 30 cm
40 cm
340 m
23,6 kg
80 cm x 30 cm
50 cm
340 m
23,2 kg
80 cm x 30 cm
60 cm
340 m
22,9 kg
80 cm x 30 cm
Tape and Dripline
Nominal
Diameter
25
Neptune PC AS and AL
Neptune PC dripline is available in two
Twithheversions:
ANTI-SIPHON (AS) and NO-DRAIN (AL)
integrated pressure-compensating emitter.
Range
Neptune PC is available in a wide and complete
range of configurations:
Diameter 16 mm:
- Wall thickness 0.9, 1.0, 1.1 mm
Diameter 20 mm:
- Wall thickness 0.9,1.0, 1.2 mm
Dripper spacing:
25/30/40/45/50/60/70/75/80/90/100 cm
(Other spacing available on request)
The pressure-compensating mechanism of the
dripper guarantees:
High resistance to clogging;
High emission uniformity;
Multiyear durability.
The great distribution uniformity optimizes the crop
results; each plant receives the same amount of
water, nutritional factors and fertilizers.
Neptune PC can be installed on the surface,
underground or hanged on a wire.
Grouping spacing (optional).
4 different emitters with flow rates:
- 3,8 l/h between 0,5 and 3,5 bar;
- 1,0 l/h between 0,5 and 3,5 bar.
Tape and Dripline
2 emitters’ versions:
- ANTI-SIPHON (AS);
- NO-DRAIN (AL).
Main features
The pressure compensating emitter makes Neptune PC
the perfect choice for:
Difficult topographical conditions, particularly on
undulating terrain;
Installations requiring long lateral lines;
Variable or low water pressure.
Neptune PC has the following characteristics:
Pressure compensating system guaranteeing a constant
flow rate even when the pressure varies (between
0,5 and 3,5 bar), allowing precise water and nutrient
distribution even in the toughest conditions;
The anti-siphon (AS) system (both in the AS that in AL
version) reduces suction effects, preventing suction of
impurities;
Excellent efficiency that allows long lateral lines with
high emission uniformity;
The wide range of emitters and the spacing give great
flexibility in the system design;
26
Outlet hole made using precision mechanical
technology
Product identification code printed on tube
The ANTI-SIPHON system prevents impurities entering
from the outside and can therefore also be installed
underground, perfectly maintaining its irrigation
characteristics and its multiyear durability.
The NO-DRAIN system is the version specifically
designed to be installed in all irrigation systems where
short and frequent irrigation cycles are required.
Thanks to its low-pressure closing system, the emitter
allows:
Preventing leaks thus ensuring perfect irrigation
uniformity;
Maintaining the system pressurized hence
resulting in a further saving in time,
water and energy.
Neptune PC - AS and AL - Slope 0%
Code
The Neptune PC dripline is ideal for
irrigating permanent and seasonal
crops such as:
- Vitaceae (wine and table grapes);
- Oleaceae (olive);
- Rosaceae (apples, pears, plums,
damsons, peaches, apricots, cherries,
cherry plums, almonds, medlars,
quinces);
- Rutaceae (oranges, lemons,
clementines, citrons, grapefruit,
tangerines, limes, mapo, pomelo);
- Corylaceae (hazelnuts);
- Juglandaceae (walnuts, pecans);
- Actinidiaceae (kiwi);
- Anarcadiaceae (pistachio, mango,
cashew);
- Punicaceae (pomegranate);
- Ebanaceae (persimmon);
- Musaceae (banana);
- Rubiaceae (coffee);
- Sterculiaceae (cocoa)
- Moraceae (figs);
- Aracaceae (coconut, dates);
- Lauraceae (avocado);
- Caricaceae (papaya);
- Small fruits (bilberry, blackberry).
In topographically difficult soils,
especially on undulating land,
it is essential to use a pressure
compensating dripline able to
guarantee constant distribution in
relation to the differences in altitude.
In all these situations, Neptune PC is
the best choice.
150
150
150
150
1,0
1,6
2,4
3,8
Emitter code
10
16
24
38
If NO-DRAIN
Wall thickness in mm
(without decimal point)
Required
Filtration
mesh
Flow rate in l/h between
0,5 and 3,5 bar
16 11 40 16
Nominal diameter in mm
Flow rate per meter
(l/h/m) between
0,5 bar and 3,5 bar
Neptune PC - AS and AL
If PC ANTI-SIPHON
PPL
Emitter
Spacing
Emitter PC (3,8 l/h) PPxyyzz2538 3,8 l/h 25 cm 15,2 PPxyyzz3038 3,8 l/h 30 cm 2,7 PPxyyzz4038 3,8 l/h 40 cm 9,5 PPxyyzz4538 3,8 l/h 45 cm 8,4 PPxyyzz5038 3,8 l/h 50 cm 7,6 PPxyyzz6038 3,8 l/h 60 cm 6,3 PPxyyzz7038 3,8 l/h 70 cm 5,4 PPxyyzz7538 3,8 l/h 75 cm 5,1 PPxyyzz8038 3,8 l/h 80 cm 4,8 PPxyyzz9038 3,8 l/h 90 cm 4,2 PPxyyzz10038 3,8 l/h 100 cm 3,8
Emitter PC (2,4 l/h) PPxyyzz2524 2,4 l/h 25 cm 9,6 PPxyyzz3024 2,4 l/h 30 cm 8,0 PPxyyzz4024 2,4 l/h 40 cm 6,0 PPxyyzz4524 2,4 l/h 45 cm 5,3 PPxyyzz5024 2,4 l/h 50 cm 4,8 PPxyyzz6024 2,4 l/h 60 cm 4,0 PPxyyzz7024 2,4 l/h 70 cm 3,4 PPxyyzz7524 2,4 l/h 75 cm 3,2 PPxyyzz8024 2,4 l/h 80 cm 3,0 PPxyyzz9024 2,4 l/h 90 cm 2,7 PPxyyzz10024 2,4 l/h 100 cm 2,4 Emitter PC (1,6 l/h) PPxyyzz2516 1,6 l/h 25 cm 6,4 PPxyyzz3016 1,6 l/h 30 cm 5,3 PPxyyzz4016 1,6 l/h 40 cm 4,0 PPxyyzz4516 1,6 l/h 45 cm 3,6 PPxyyzz5016 1,6 l/h 50 cm 3,2 PPxyyzz6016 1,6 l/h 60 cm 2,7 PPxyyzz7016 1,6 l/h 70 cm 2,3 PPxyyzz7516 1,6 l/h 75 cm 2,1 PPxyyzz8016 1,6 l/h 80 cm 2,0 PPxyyzz9016 1,6 l/h 90 cm 1,8 PPxyyzz10016 1,6 l/h 100 cm 1,6 Emitter PC (1,0 l/h) PPxyyzz2510 1,0 l/h 25 cm 4,0 PPxyyzz3010 1,0 l/h 30 cm 3,3 PPxyyzz4010 1,0 l/h 40 cm 2,5 PPxyyzz4510 1,0 l/h 45 cm 2,2 PPxyyzz5010 1,0 l/h 50 cm 2,0 PPxyyzz6010 1,0 l/h 60 cm 1,7 PPxyyzz7010 1,0 l/h 70 cm 1,4 PPxyyzz7510 1,0 l/h 75 cm 1,3 PPxyyzz8010 1,0 l/h 80 cm 1,3 PPxyyzz9010 1,0 l/h 90 cm 1,1 PPxyyzz10010 1,0 l/h 100 cm 1,0 Codification
PPC
Individual emitter
flow rate between
0,5 bar and 3,5 bar
Tape and Dripline
Applications
Individual emitter flow rate in l/h
(without decimal point)
Emitter spacing
in cm
27
The following tables indicate the maximum length of the lines in relation
Note:
In determining the maximum length, the maximum inlet pressure as
indicated in the “Technical Data” table must be respected.
Performance
Neptune PC - AS and AL - Diameter 16 mm - Slope 0%
Tape and Dripline
Code 28
PPx16xx2538
PPx16xx3038
PPx16xx4038
PPx16xx4538
PPx16xx5038
PPx16xx6038
PPx16xx7038
PPx16xx7538
PPx16xx8038
PPx16xx9038
PPx16xx10038
PPx16xx2524
PPx16xx3024
PPx16xx4024
PPx16xx4524
PPx16xx5024
PPx16xx6024
PPx16xx7024
PPx16xx7524
PPx16xx8024
PPx16xx9024
PPx16xx10024
PPx16xx2516
PPx16xx3016
PPx16xx4016
PPx16xx4516
PPx16xx5016
PPx16xx6016
PPx16xx7016
PPx16xx7516
PPx16xx8016
PPx16xx9016
PPx16xx10016
PPx16xx2510
PPx16xx3010
PPx16xx4010
PPx16xx4510
PPx16xx5010
PPx16xx6010
PPx16xx7010
PPx16xx7510
PPx16xx8010
PPx16xx9010
PPx16xx10010
Individual Emitter
flow rate between
0,5 bar 3,5 bar
3,8 l/h
2,4 l/h
1,6 l/h
1,0 l/h
Emitter
spacing
@ 1,0 bar
@ 1,5 bar
@ 2,0 bar
@ 2,5 bar
@ 3,0 bar @ 3,5 bar
25 cm45 58 67 748085
30 cm52 67 77 859298
40 cm 66 84 97 107115123
45 cm 72 92 106 117126135
50 cm 78 99 114 127137146
60 cm 89 113 131 145157167
70 cm 99 127 146 162175187
75 cm104 133 154 170184196
80 cm109 140 161 178193206
90 cm118 152 175 194210224
100 cm127 163 189 209226241
25 cm
61 789099107
114
30 cm 71 90 104 115124132
40 cm 88 113 130 144155166
45 cm 96 123 142 157170181
50 cm104 133 154 170184196
60 cm119 152 176 195211224
70 cm133 170 197 218235251
75 cm140 179 207 229247264
80 cm146 187 216 239259276
90 cm159 204 235 260282300
100 cm171 219 253 280303323
25 cm 80 102 117 130140149
30 cm 92 118 136 150162173
40 cm115 147 169 187203216
45 cm125 160 185 205222236
50 cm135 173 200 222240256
60 cm155 198 229 253274292
70 cm173 221 256 283307327
75 cm181 232 268 297322344
80 cm190 243 281 311337360
90 cm206 264 305 338366391
100 cm222 284 329 364396421
25 cm109 138 159 176190202
30 cm125 160 183 203220234
40 cm156 199 229 254274292
45 cm170 217 251 277300319
50 cm184 235 271 300324345
60 cm210 268 310 343370395
70 cm234 300 346 383414441
75 cm246 315 363 402435464
80 cm257 329 380 421455485
90 cm279 357 413 457495527
100 cm300 385 444 493532568
Neptune PC - AS and AL - Diameter 20 mm - Slope 0%
PPx20xx2538
PPx20xx3038
PPx20xx4038
PPx20xx4538
PPx20xx5038
PPx20xx6038
PPx20xx7038
PPx20xx7538
PPx20xx8038
PPx20xx9038
PPx20xx10038
PPx20xx2524
PPx20xx3024
PPx20xx4024
PPx20xx4524
PPx20xx5024
PPx20xx6024
PPx20xx7024
PPx20xx7524
PPx20xx8024
PPx20xx9024
PPx20xx10024
PPx20xx2516
PPx20xx3016
PPx20xx4016
PPx20xx4516
PPx20xx5016
PPx20xx6016
PPx20xx7016
PPx20xx7516
PPx20xx8016
PPx20xx9016
PPx20xx10016
PPx20xx2510
PPx20xx3010
PPx20xx4010
PPx20xx4510
PPx20xx5010
PPx20xx6010
PPx20xx7010
PPx20xx7510
PPx20xx8010
PPx20xx9010
PPx20xx10010
Individual Emitter
flow rate between
0,5 bar 3,5 bar
3,8 l/h
2,4 l/h
1,6 l/h
1,0 l/h
Emitter
spacing
@ 1,0 bar
@ 1,5 bar
@ 2,0 bar
@ 2,5 bar
@ 3,0 bar @ 3,5 bar
25 cm
66
84
97
107
116
123
30 cm77 98 113124 134143
40 cm97 123 142157 170181
45 cm106 135 156172 186198
50 cm115 147 169187 202215
60 cm132 168 194215 232247
70 cm148 189 218241 260278
75 cm155 199 229253 274292
80 cm163 208 240266 287306
90 cm177 227 262290 313334
100 cm191 244 282312 338360
25 cm89 114 131144 156166
30 cm104 132 152168 181193
40 cm130 166 191211 228243
45 cm143 182 210232 250267
50 cm155 197 227251 272289
60 cm177 226 261289 312332
70 cm198 254 293324 350373
75 cm209 267 308341 368393
80 cm219 280 323357 386412
90 cm238 304 351389 421448
100 cm256 328 379419 454484
25 cm116 148 171189 204217
30 cm135 172 198219 237252
40 cm169 216 249275 298317
45 cm185 237 272301 326348
50 cm201 256 296327 354377
60 cm230 294 339376 407433
70 cm258 330 380421 456486
75 cm271 347 400443 480511
80 cm284 365 419464 503536
90 cm309 395 456505 547584
100 cm332 426 492545 591630
25 cm159 202 232256 276294
30 cm184 234 269297 321342
40 cm230 293 339373 403430
45 cm252 321 370409 442471
50 cm273 348 401443 479510
60 cm312 399 460508 550586
70 cm349 446 515570 616657
75 cm367 469 542599 648691
80 cm385 492 567628 679724
90 cm418 535 617683 739788
100 cm450 576 665736 797849
Tape and Dripline
Code 29
Nominal
Diameter
16 mm
20 mm
Internal
Diameter
13,8 mm
17,6 mm
External
Diameter
Max
Pressure
Coil
Lenght
0,9 mm
15,6 mm
3,5 bar
500 m
1,0 mm
15,8 mm
3,5 bar
500 m
1,1 mm
16,0 mm
3,5 bar
500 m
0,9 mm
19,4 mm
3,0 bar
370 m
1,0 mm
19,6 mm
3,3 bar
350 m
1,2 mm
20,0 mm
3,5 bar
340 m
Container
20’
Container
40’
160
320
Container
40’ HC
360
Truck
13,6 m
400
Tape and Dripline
Quantity of coils
Wall
thickness
30
Emitter spacing
Wall thickness
0,9 mm
16 mm
1,0 mm
1,1 mm
0,9 mm
20 mm
1,0 mm
1,2 mm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
25 cm
30 cm
40 cm
45 cm
50 cm
60 cm
70 cm
75 cm
80 cm
90 cm
100 cm
Coil weight
Coil dimensions
(Ø x h)
22,2 kg 80 cm x 30 cm
21,9 kg 80 cm x 30 cm
21,5 kg 80 cm x 30 cm
21,4 kg 80 cm x 30 cm
21,3 kg 80 cm x 30 cm
21,2 kg 80 cm x 30 cm
21,1 kg 80 cm x 30 cm
21,1 kg 80 cm x 30 cm
21,0 kg 80 cm x 30 cm
21,0 kg 80 cm x 30 cm
20,9 kg 80 cm x 30 cm
24,5 kg 80 cm x 30 cm
24,2 kg 80 cm x 30 cm
23,8 kg 80 cm x 30 cm
23,7 kg 80 cm x 30 cm
23,6 kg 80 cm x 30 cm
23,5 kg 80 cm x 30 cm
23,4 kg 80 cm x 30 cm
23,4 kg 80 cm x 30 cm
23,3 kg 80 cm x 30 cm
23,3 kg 80 cm x 30 cm
23,2 kg 80 cm x 30 cm
26,8 kg 80 cm x 30 cm
26,5 kg 80 cm x 30 cm
26,1 kg 80 cm x 30 cm
26,0 kg 80 cm x 30 cm
25,9 kg 80 cm x 30 cm
25,8 kg 80 cm x 30 cm
25,7 kg 80 cm x 30 cm
25,7 kg 80 cm x 30 cm
25,6 kg 80 cm x 30 cm
25,6 kg 80 cm x 30 cm
25,5 kg 80 cm x 30 cm
19,0 kg 80 cm x 30 cm
18,8 kg 80 cm x 30 cm
18,6 kg 80 cm x 30 cm
18,5 kg 80 cm x 30 cm
18,4 kg 80 cm x 30 cm
18,3 kg 80 cm x 30 cm
18,2 kg 80 cm x 30 cm
18,2 kg 80 cm x 30 cm
18,2 kg 80 cm x 30 cm
18,1 kg 80 cm x 30 cm
18,1 kg 80 cm x 30 cm
19,9 kg 80 cm x 30 cm
19,7 kg 80 cm x 30 cm
19,4 kg 80 cm x 30 cm
19,4 kg 80 cm x 30 cm
19,3 kg 80 cm x 30 cm
19,2 kg 80 cm x 30 cm
19,1 kg 80 cm x 30 cm
19,1 kg 80 cm x 30 cm
19,1 kg 80 cm x 30 cm
19,0 kg 80 cm x 30 cm
19,0 kg 80 cm x 30 cm
22,9 kg 80 cm x 30 cm
22,7 kg 80 cm x 30 cm
22,5 kg 80 cm x 30 cm
22,4 kg 80 cm x 30 cm
22,4 kg 80 cm x 30 cm
22,3 kg 80 cm x 30 cm
22,2 kg 80 cm x 30 cm
22,2 kg 80 cm x 30 cm
22,2 kg 80 cm x 30 cm
22,1 kg 80 cm x 30 cm
22,1 kg 80 cm x 30 cm
Tape and Dripline
Nominal
Diameter
31
Drip In® PC Pressure-Compensating
rip In® PC dripline has a cylindrical
pressure-compensating emitter, ideal
D
for irrigating land in difficult topographical
conditions or where long lateral lines are
required.
Drip In® PC emitter guarantees:
Resistance to clogging;
Range
Emission uniformity;
Durability.
Drip In® PC can be laid on the surface,
sub-surface or hanged on a wire.
Drip In® PC is available in:
Diameter 16 mm
- Wall thickness 1,1 mm
- Pressure-compensating emitters:
1,2 / 1,6 / 2,0 / 2,4 / 3,8 l/h between
0,7 and 4,1 bar
Main features
Diameter 20 mm
- Wall thickness 1,2 mm
- Pressure-compensating emitters:
2,2 / 2,4 / 3,8 l/h between 0,7 and 4,1 bar
Drip In® PC is characterised by:
Pressure compensating system
guaranteeing a constant flow rate even
when the pressure varies (between 0,7
and 4,1 bar);
Tape and Dripline
Emitter spacing 30/40/50/60/75/80/100 cm
(other spacing available on request).
High clogging resistance, thanks to the
design of the emitter, designed for use
over a number of years;
- Self-cleaning diaphragm
- The raised inlet prevent sediment
deposits from entering the emitter;
Applications
The Drip In® PC dripline is ideal
for irrigating permanent crops on
undulating land and topographically
difficult land in general.
Two outlet holes on opposite sides
prevent suction of impurities;
Product identification code printed on
tube.
Codification
EHDPCE XX YY - ZZ
Emitter spacing in cm
ID for Drip In® PC
Individual emitter flow rate in l/h
Nominal diameter in mm
32
Drip In® PC
Performance
Pressure-Compensating
The following tables indicate the maximum length of the lines in
relation to inlet water pressure.
Drip In® PC Diameter 16 mm - Slope 0%
Code
EHDPCE161.2-30
EHDPCE161.2-40
EHDPCE161.2-50
EHDPCE161.2-60
EHDPCE161.2-75
EHDPCE161.2-100
EHDPCE161.6-30
EHDPCE161.6-40
EHDPCE161.6-50
EHDPCE161.6-60
EHDPCE161.6-75
EHDPCE161.6-100
EHDPCE162-30
EHDPCE162-40
EHDPCE162-50
EHDPCE162-60
EHDPCE162-75
EHDPCE162-100
EHDPCE162.4-30
EHDPCE162.4-40
EHDPCE162.4-50
EHDPCE162.4-60
EHDPCE162.4-75
EHDPCE162.4-100
EHDPCE164-30
EHDPCE164-40
EHDPCE164-50
EHDPCE164-60
EHDPCE164-75
EHDPCE164-100
Individual emitter
flow rate between
0,7 and 4,1 bar
Emitter
spacing
1,2 l/h
1,2 l/h
1,2 l/h
1,2 l/h
1,2 l/h
1,2 l/h
1,6 l/h
1,6 l/h
1,6 l/h
1,6 l/h
1,6 l/h
1,6 l/h
2,0 l/h
2,0 l/h
2,0 l/h
2,0 l/h
2,0 l/h
2,0 l/h
2,4 l/h
2,4 l/h
2,4 l/h
2,4 l/h
2,4 l/h
2,4 l/h
3,8 l/h
3,8 l/h
3,8 l/h
3,8 l/h
3,8 l/h
3,8 l/h
30 cm
40 cm
50 cm
60 cm
75 cm
100 cm
30 cm
40 cm
50 cm
60 cm
75 cm
100 cm
30 cm
40 cm
50 cm
60 cm
75 cm
100 cm
30 cm
40 cm
50 cm
60 cm
75 cm
100 cm
30 cm
40 cm
50 cm
60 cm
75 cm
100 cm
@ 1,0 bar
70
89
109
127
153
192
57
74
89
106
126
158
50
64
78
92
111
140
44
57
70
82
98
125
33
42
52
61
73
93
@ 1,7 bar @ 2,4 bar
98
126
153
179
216
272
80
104
126
148
178
226
77
104
121
142
171
217
69
89
108
126
153
193
51
66
81
94
114
144
@ 3,0 bar
@ 3,5 bar
@ 4,0 bar
140
180
219
256
310
393
115
148
180
211
255
325
104
130
164
192
232
294
93
121
146
171
207
232
69
90
109
128
154
195
149
192
234
274
332
421
123
157
193
226
273
347
112
145
177
207
249
315
100
129
157
184
222
281
74
96
117
137
166
210
156
203
248
290
350
446
129
166
204
239
289
367
119
154
187
219
265
335
106
137
167
195
236
298
79
102
124
146
176
223
129
165
202
237
285
361
106
137
166
195
236
299
93
121
147
172
208
263
83
108
131
153
185
234
62
80
98
114
138
175
Drip In® PC Diameter 20 mm - Slope 0%
Individual emitter
flow rate between
0,7 and 4,1 bar
EHDPCE202-302,2 l/h
EHDPCE202-40
2,2 l/h
EHDPCE202-502,2 l/h
EHDPCE202-60
2,2 l/h
EHDPCE202-752,2 l/h
EHDPCE202-100
2,2 l/h
EHDPCE202.4-30
2,4 l/h
EHDPCE202.4-40
2,4 l/h
EHDPCE202.4-50
2,4 l/h
EHDPCE202.4-602,4 l/h
EHDPCE202.4-75
2,4 l/h
EHDPCE202.4-100
2,4 l/h
EHDPCE204-30
3,8 l/h
EHDPCE204-40
3,8 l/h
EHDPCE204-50
3,8 l/h
EHDPCE204-603,8 l/h
EHDPCE204-75
3,8 l/h
EHDPCE204-100
3,8 l/h
Emitter
spacing
@ 1,0 bar
@ 1,7 bar @ 2,4 bar
@ 3,0 bar
@ 3,5 bar
@ 4,0 bar
30 cm
84
129
157176189 200
40 cm 107166 201 225 241256
50 cm
128
199
242270290 308
60 cm 149231 280 313 336357
75 cm
178
276
334373401 425
100 cm
222
344
417
466
500531
30 cm
79
122148 166 178 189
40 cm
101
156
190
212227 241
50 cm
121188 228 254 273 290
60 cm
141
218
264295317 336
75 cm 168260 315 352 378401
100 cm
209324 393 439 471 500
30 cm
59
91
111
124133 141
40 cm
75
117142 158 170 180
50 cm
91
140
170
190
204217
60 cm
105
163197 220 236 251
75 cm 125194 235 263 282299
100 cm
156
242
293
327
352
373
Nominal diameter
Internal diameter
Wall
thickness
Outside diameter
Max
pressure
Coil
length
Coil
weight
Coil dimensions
(Ø X h)
16 mm
20 mm
13,8 mm
17,6 mm
1,1 mm
1,2 mm
16,0 mm
20,0 mm
4,0 bar
4,0 bar
400 m
300 m
21 kg
20 kg
83 cm x 30 cm
83 cm x 30 cm
Quantity of Coils
Container
20’
Container
40’
Container
40’ HC
Truck
13,6 m
160
320
360
400
Tape and Dripline
Code
33
Low Density
Polyethylene Hose
(LDPE) with round and oval section
low density polyethylene hose is made from selected
T hepolymers
to guarantee reliability and practicality.
Its composition ensures a long service life, even in the most
adverse environmental conditions.
The mechanical characteristics of the polyethylene tubing
make the insertion of on-line drippers easy and secure.
Range
The low density polyethylene hose range includes:
Diameter 16 mm
- Wall thickness 0,9* and 1,1 mm
The low density polyethylene hose is characterized by:
Diameter 20 mm
- Wall thickness 0,9* and 1,2 mm
Round section (EHD codes) specifically designed for the
insertion of drippers (Euro-Key / Euro-Plus / NGE).
Oval section (PHW codes) to connect main lines to drip
lines.
Colours:
- Brown and White for round section (EHD codes)
- Black with single blue stripe for oval section
(PHW code)
Tape and Dripline
Main features
Long service life even in the most severe working
conditions;
High resistance to the fertilisers traditionally used in
agriculture;
Easy insertion of drippers such as Euro-Key / Euro-Plus /
NGE AL / NGE SF;
Blue stripe (in the black version) for easy identification;
Product identification code printed on tube.
*0.9 mm wall thickness is available for PHW codes only.
Applications
The low density polyethylene hose allows
transport of water and nutrients in all
applications in which use of on-line drippers is
preferable or where secondary or branch lines
are required.
For above-ground flower and horticultural
greenhouse crops, use of the white hose is
particularly indicated.
In these applications, use of the white hose
allows water temperature in the tubing to be
reduced, thus limiting the thermal stress at the
plant root.
The range specifically designed for greenhouse
applications includes distribution kits (see the
“Accessories” section on page 46 for further details).
34
Low Density Polyethylene Hose
(LDPE) with round and oval section
Codification for hose with round section
EHD W 16 - 400
ID for round hose
Coil length in meters: 400 m
Colour: W for White, B for Brown
Nominal diameter in mm: 16 mm
Codification for hose with oval section
PHW 16 11
ID for oval hose
Wall thickness in mm (without decimal
point): 1,1 mm
Nominal diameter in mm: 16 mm
Nominal
Diameter
Internal
Diameter
16 mm
13,8 mm
20 mm
17,6 mm
Wall
Thickness
Outside
Diameter
Max
Pressure
Coil
Lenght
Coil
Weight
Coil Dimensions
(Ø X h)
1,1 mm
16,0 mm
4,0 bar
1,1 mm
16,0 mm
4,0 bar
50 m
2,5 kg
55 cm x 22 cm
400 m
20,0 kg
1,2 mm
20,0 mm
4,0 bar
50 m
3,3 kg
83 cm x 32 cm
55 cm x 22 cm
1,2 mm
20,0 mm
4,0 bar
300 m
19,5 kg
83 cm x 32 cm
Container
20’
Container
40’
160
320
Quantity of Coils
Container
40’ HC
360
Truck
13,6 m
400
Technical and logistical data for hose
with oval section
Nominal
Diameter
Internal
Diameter
16 mm
13,8 mm
20 mm
17,6 mm
Wall
Thickness
Outside
Diameter
Max
Pressure
Coil
Lenght
Coil
Weight
Coil Dimensions
(Ø X h)
0,9 mm
15,6 mm
3,5 bar
500 m
21,0 kg
80 cm x 30 cm
1,1 mm
16,0 mm
4,0 bar
500 m
25,5 kg
80 cm x 30 cm
0,9 mm
19,4 mm
3,0 bar
370 m
18,0 kg
80 cm x 30 cm
1,2 mm
20,0 mm
4,0 bar
340 m
22,0 kg
80 cm x 30 cm
Quantity of Coils
Container
20’
Container
40’
160
320
Container
40’ HC
360
Tape and Dripline
Technical and logistical data for hose
with round section
Truck
13,6 m
400
35
Ag-Flat
Applications
Tape and Dripline
Farmland with drip or
sprinkler irrigation systems.
Features
Handy, lightweight, flexible, it can be
installed without damages;
Ideal for connections, main lines and
second lines
Easy to join, cut and drill to insert
joints. The use of woven polyester
yarns assure stability over the entire
tube length.
Specifications
Material: made by synthetic yarns
of high strength polyester and 3
layers.
Range of operating temperature:
-20 ° C to + 70 ° C (over 44 ° C
decrease the operating pressure).
36
Ag-Flat
Range
The Ag-flat line Low Pressure is blue colored and it is the best solution for drip irrigation
that can be fitted directly on to the line using the special couplings.
Code
Size
Internal
Diameter
Operating
Pressure*
Bursting
Pressure*
(@20°C)
pollicimm bar
Wall
Thickness
Reel
Lenght
Reel Weight
bar mmm
kg
LF-A204-1002” 53 4 12 1,20100
27
LF-A304-1003” 78
4
12 1,55100
45
53
LF-A403-1004” 105 3
10 1,40100
LF-A503-1005” 129 3
9
1,75100
90
LF-A603-1006”156,5 3
9
2,00100
100
* The pressure values indicated refer to undamaged tube.
The Ag-flat line High Pressure is green colored and it is the best solution for mini-sprinkler system and
main feed lines can be fitted directly onto the line using the special couplings.
Code
Size
Internal
Diameter
Operating
Pressure*
Bursting
Pressure*
(@20°C)
pollicimm bar
Wall
Thickness
Reel
Lenght
Reel Weight
bar mmm
kg
LF-A210-1002” 53 10 30 1,70100
33
LF-A306-1003” 78
57
6 18 1,90100
LF-A406-1004” 105 6
18 2,00100
78
LF-A506-1005” 129 6
18 2,30 100100
LF-A606-1006”156,5 6
18 2,30 100
132
Codification
Code
Description
LF-A204-100
PCV Flat Hose 2”, 4 bar - Blue
LF-A304-100
LF-A403-100
LF-A503-100
LF-A603-100
LF-A210-100
PCV Flat Hose 2”, 10 bar - Green
LF-A306-100
LF-A406-100
LF-A506-100
LF-A606-100
Tape and Dripline
* The pressure values indicated refer to undamaged tube.
37
38
Drippers
39
Euro Key
Applications
Vineyards, orchards or similar applications
Specifications
Features
Flow rate: 2, 4, 8, 16, 24 l/h
Recommended operating pressure range: 1,0-2,0
bar
CV ≤ 5%
Inlet: 4 mm barbed
Male outlet offtake for 4x6 mm microtube
Classic dripper
Removable cap to permit fast and easy field
inspection
Base lugs for dripper line stability
A-Class dripper in conformity with UNI ISO
9260 norms
Low variation coefficient (CV)
Larger self-flushing turbulent flow channel
provides higher resistance to plugging
Key available (EU-DNK00)
Performance
DRIPPERS
Model
Disc
1,0 bar
Flow Rate @
1,25 bar
1,5 bar
Euro-Key 2 l/h White
2,0 l/h 2,4 l/h Euro-Key 4 l/h
Black 4,0 l/h 5,0 l/h 5,6 l/h
Euro-Key 8 l/h Green8,0 l/h 2,8 l/h
9,7 l/h 11,2 l/h
Euro-Key 16 l/h Red 16,0 l/h 16,8 l/h 9,5 l/h
Euro-Key 24 l/h Yellow
24,7 l/h 29,0 l/h 34,0 l/h
Codification
Code Description
EU-DNK02-2-BLUE
Euro Key 2 l/h, classic dripper with male outlet, blue base
EU-DNK04-2 Euro Key 4 l/h, classic dripper with male outlet, black base
EU-DNK08-2-RED Euro Key 8 l/h, classic dripper with male outlet, red base
EU-DNK16-2-MB Euro Key 16 l/h, classic dripper with male outlet, brown base
EU-DNK24-2-GREEN Euro Key 24 l/h, classic dripper with male outlet, green base
40
Euro Plus
Features
Applications
Ideal for long sloping lines
and where the ground is
not flat.
Pressure compensating dripper
Improved pressure compensation flow rate uniformity
over a wide range of pressure variance is better than ever
Removable cap to permit fast and easy field inspection
Base lugs for dripper line stability
A-Class dripper in conformity with UNI ISO 9260 norms
Larger self-flushing turbulent flow channel provides higher
resistance to plugging
Silicone diaphragm
Key available (EU-DNK00)
Specifications
Flow rate: 4, 8 l/h
Recommended operating pressure range:
0,5-3,5 bar
CV ≤ 5%
Inlet: 4 mm barbed
Male outlet offtake for 4x6 mm microtube
Performance
1,0 bar
2,0 bar
Flow rate @
3,0 bar
Euro-Plus 4 l/h
3,9 l/h
3,9 l/h
3,9 l/h
₋
Euro-Plus 8 l/h
7,6 l/h
7,9 l/h
8,1 l/h
8,35 l/h
Codification
Code Description
EU-DPJ04-2 Euro-Plus 4 l/h pressure compensating dripper
EU-DPJ08-2 Euro-Plus 8 l/h pressure compensating dripper
4,0 bar
DRIPPERS
Model
41
NGE AL
Applications
Tank farming or potted plants, greenhouses
and nurseries.
Specifications
Features
Flow rate: 2, 3, 4, 8 l/h
Pressure compensating, anti-leakage dripper
Recommended filtration: 120 mesh
Pressure compensating range: 1,0-4,1 bar
Larger self-flushing turbulent flow channel provides
higher resistance to plugging
Opening pressure: 0,9 bar
Closing pressure:
- 0,24 bar for 2 l/h
Acid resistant, down to pH2
A-Class dripper in conformity with UNI ISO 9260 norms
Anti-drainage device that closes the dripper and avoids:
- loss loads for short irrigation and fertigation cycle
- pipe draining
- water wastage
Max flow rate shift ± 5%
CV ≤ 3%
Silicone diaphragm
For the “Black and White Spider” distribution
kits, see the next section on page 46.
Performance
Model
Flow rate @
1,4 bar
2,1 bar
2,8 bar
3,4 bar
NGE AL 2 l/h
1,90 l/h
1,98 l/h
2,01 l/h
2,02 l/h
2,01 l/h
1,97 l/h
NGE AL 3 l/h
2,85 l/h
2,96 l/h
3,0 l/h
3,05 l/h
3,06 l/h
3,07 l/h
NGE AL 4 l/h
3,8 l/h
3,95 l/h
3,97 l/h
3,99 l/h
4,01 l/h
4,00 l/h
NGE AL 8 l/h
7,8 l/h
8,09 l/h
8,05 l/h
8,05 l/h
8,06 l/h
8,0 l/h
DRIPPERS
1,0 bar
42
4,1 bar NGE AL
9,00
7,00
6,00
NGE AL 2 l/h
NGE AL 3 l/h
NGE AL 4 l/h
NGE AL 8 l/h
5,00
4,00
3,00
2,00
1,00
0,00
0,2
0,3
0,5
0,7
1,4
2,8
4,1
3,4
2,1
1,0
0,6
0,3
0,2
Pressure (bar)
Codification
Code Description
DPC02-MA-AL-BLUE
NGE AL 2 l/h, pressure compensating anti-leakage dripper, Blue
DPC03-MA-AL-GREEN
NGE AL 3 l/h, pressure compensating anti-leakage dripper, Green
DPC04-MA-AL-GREY
NGE AL 4 l/h, pressure compensating anti-leakage dripper, Grey
DPC08-MA-AL-RED
NGE AL 8 l/h, pressure compensating anti-leakage dripper, Red
DRIPPERS
Flow Rate (l/h)
8,00
43
NGE SF
Applications
Ideal for open field application in
difficult topographical conditions.
Features
Specifications
Pressure compensating, self-cleaning dripper
Flow rate: 2, 4, 8 l/h
Larger self-flushing turbulent flow channel
provides higher resistance to plugging
Recommended filtration: 120 mesh
Silicone diaphragm
Pressure compensating range: 0,6-4,1 bar
Acid resistant, down to pH2
Max flow rate shift ± 5%
Self-cleaning system in the depressurization stage
CV ≤ 3%
A-Class dripper in conformity with UNI ISO 9260
norms
Available with male outlet or with dust cup
For the “Black and White Spider” distribution
kits, see the next section on page 46.
Performance
Model
Flow rate @
0,6 bar
0,7 bar
1,0 bar
1,4 bar
2,1 bar
2,8 bar
4,1 bar
NGE SF 2 l/h
1,95 l/h
2,0 l/h1,99 l/h 1,98 l/h 2,01 l/h 2,02 l/h
2,01 l/h 1,97 l/h
NGE SF 4 l/h
3,71 l/h
3,94 l/h
4,01 l/h 3,95 l/h 3,97 l/h 3,99 l/h 4,01 l/h 4,0 l/h
NGE SF 8 l/h
7,36 l/h
7,89 l/h 8,23 l/h 8,09 l/h 8,05 l/h 8,05 l/h 8,06 l/h 8,0 l/h
DRIPPERS
44
3,4 bar
NGE SF
9,00
7,00
6,00
NGE SF 2 l/h
5,00
NGE SF 4 l/h
4,00
NGE SF 8 l/h
3,00
2,00
1,00
0,00
0,2
0,3
0,5
0
,7
1,4
2
,8
4,1
3
,4
2,1
1
,0
0,6
0
,3
0,2
Pressure (bar)
Codification
Code
Description
DPC02-MA-BLUE
NGE SF 2 l/h pressure compensating self-flushing dripper with male outlet, blue
DPC04-MA-BLACK
NGE SF 4 l/h pressure compensating self-flushing dripper with male outlet, black
DPC08-MA-RED
NGE SF 8 l/h pressure compensating self-flushing dripper with male outlet, red
DPC02-DC-BLUE
NGE SF 2 l/ pressure compensating self-flushing dripper with dust cup, blue
DPC04-DC
NGE SF 4 l/h pressure compensating self-flushing dripper with dust cup, black
DPC08-DC-RED
NGE SF 8 l/h pressure compensating self-flushing dripper with dust cup, red
DRIPPERS
Flow Rate (l/h)
8,00
45
NGE dripper Accessories
Black and White Spider
Features
Ideal for situations where precise
irrigation is required
High Uniformity
Easy to install
Specifications
Available in 1, 2, 4 outlets
The flow rate of each single stake may differ according to different
types of installation and materials used
Kit including:
• Outlet manifold: Straight (180°), Tee and Cross
• Drip point stakes: 180° with internal flow path, 90° with internal flow path or barbed (both black and grey)
• Microtube: PEVA* 3x5 mm flexible microtube (60 cm or 80 cm)
Black/White Spider single outlet uses IPS0301BQ 90° barbed stake to
avoid back-pressure problems with auto compensation decreasing
*PEVA: Mixture of polyethylene and vinilacetate, it makes polyethylene more flexible.
DRIPPERS
Don’t use with Euro Key, Euro Plus and Turbo Plus
46
Codification
Code
Description
1 Outlet
IT-DBS1BQ
Black Spider 1 outlet 60 cm: 1 outlet manifold 180°, 1 barbed stake 90°,
1 microtube 3x5 mm 60 cm
IT-DBS1BQ-80
Black Spider 1 outlet 80 cm: 1 outlet manifold 180°, 1 barbed stake 90°,
IT-DBS1BWQ-60
White Spider 1 outlet 60 cm: 1 outlet manifold 180°, 1 barbed stake 90° (grey),
2 Outlet
IT-DBS2
Black Spider 2 outlets 60 cm: 1 Tee outlet manifold, 1 stake 180° with flow path,
IT-DBS2Q
IT-DBS2-80
IT-DBS2Q-80
IT-DBS2W
White Spider 2 outlets 60 cm: 1 Tee outlet manifold, 1 stake 180° with flow path,
IT-DBS2WQ
IT-DBS2WQ-80
IT-DBS2BWQ
White Spider 2 outlets 60 cm: 1 Tee outlet manifold, 1 stake 90° barbed (grey),
IT-DBS4
Black Spider 4 outlets 60 cm: 1 Cross outlet manifold, 1 stake 180° with flow path,
IT-DBS4Q
IT-DBS4-80
IT-DBS4Q-80
IT-DBS4W
White Spider 4 outlets 60 cm: 1 Cross outlet manifold, 1 stake 180° with flow path,
IT-DBS4WQ
White Spider 4 outlets 60 cm: 1 Cross outlet manifold, 1 stake 90° with flow path,
DRIPPERS
4 Outlet
47
Black and White Spider Accessories
Code
Description
Outlets manifold
DNS1Q
1 Outlet Manifold Elbow (90°), Ø 4 mm, 1 x barbed
DNS1
1 Outlet Manifold straight (180°), Ø 4 mm, 1 x barbed
DNS2
2 Outlets Manifold (Tee), Ø 4 mm, 2 x barbed
DNS4
4 Outlets Manifold (Cross), Ø 4 mm, 4 x barbed
DRIPPERS
Stakes
IPS0301
Flow path stake turbulent flow 180° (straight)
IPS0301Q
Flow path stake turbulent flow 90° (elbow)
IPS0301BQ*
Barbed stake 90° (elbow)
IPS0301BQ-G*
Barbed stake 90° (elbow)- Grey
Microtube
IT-EHD503PEVA
PEVA microtube Ø 3x5mm
IT-EHD503PEVAW
PEVA white microtube Ø 3x5mm
SFH0332-24
PEVA microtube Ø3x5mm (60 cm pre-cut)
SFH0332-32
PEVA microtube Ø3x5mm (80 cm pre-cut)
*Stakes must be used with the Black and White Spider single outlet to avoid back-pressure problems
48
Capillary Line
Applications
Ideal for watering pots, greenhouses
or nurseries
Standard Model
Self-tapping stake
The standard stake accepts a
capillary tube with outside
ø 3,2 mm
Colibrì Model
Angle self-tapping stake
The colibrì stake accepts a
capillary tube with outside
ø 3,2 mm
Codification
Code
Description
IT-RCP90885-1
Capillary 3,2 x 0,8 x 85 cm
IT-RCP908100-1
Capillary 3,2 x 0,8 x 100 cm
IT-RCP90800-X
Capillary 3,2 x 0,8 mm reel
EU-IPS0315
Colibrì stake (90°) for capillary tube ø 3,2 mm
EU-IPS0305-A
Stake for capillary tube da 2,9 a 3,2mm, black
EU-IPS0305-A1
Stake for capillary tube da 2,9 a 3,2mm, blue
EU-IPS0305-A2
Stake for capillary tube da 2,9 a 3,2mm, red
DRIPPERS
Capillary angle adjustment:
45°-90°
49
50
Mini Sprinklers
51
WB VI Classic
Applications
Orchards, nurseries, vegetable row crops and
undertree irrigation
Features
Specifications
Double bearing ensures spinner stability and long life
Low angle of throw for maximizing under foliage penetration
Improved distribution characteristics with large droplet size
being less susceptible to wind effects
Anti-insect/dust proof spinner retracts to protect nozzle when
not in operation
Materials: robust and proven sturdy double
framed sprinkler. Spinner in Nylon
Threads: 3/8” male
Diameter: 4,5-10,3 m
Flow rate: 44-304 l/h
Operating pressure range: 1,0-2,0 bar
Recommended operating pressure: 1,5 bar
(Maximum Distribution Efficiency)
New Snap Fit bearing provides easy field disassembly
Hook allows for suspension from trellis wire
Available with snap-off deflector (short radius) for
irrigating young trees. (Reduces diameter to 30% of stated
performance)
Maximum start-up torque obtained from deflector plate to
ensure reliability of start-up and operation in the most hostile
environments
Balanced spin rate to minimize stake vibration
Easy identification thanks to color coded nozzles
Colour Code
Code ø short
Mini Sprinklers
10142721014282
● 1014273
Orifice
(mm)
1,05
1014283
1,3
● 10142741014284
1,4
● 10142751014285
1,7
● 1014276 ˗
1,8
● 1014277 ˗
2,0
● 1014278 ˗
2,3
Sprinkler
spacing
Pressure
(bar)
1,0
1,5
2,0
1,0
1,5
2,0
1,0
1,5
2,0
1,0
1,5
2,0
1,0
1,5
2,0
1,0
1,5
2,0
1,0
1,5
2,0
Performance
Sandard ø
(m)
6,1
6,9
7,3
6,8
7,8
8,3
7,3
9,2
10,3
8,4
9,4
10,5
8,5
9,4
10,8
8,3
9,4
10,3
8,8
10,2
10,3
Short ø
(m)
4,5
5,0
5,5
5,5
6,5
7,5
5,5
6,5
7,5
5,0
6,0
6,5
6,0
6,5
7,0
7,0
8,0
8,5
7,5
8,5
8,5
Flow Rate
(l/h)
44
55
64
61
76
89
80
99
115
108
134
156
125
155
179
156
192
221
214
265
304
Max height of
trajectory (m)
0,56
0,62
0,65
0,57
0,71
0,90
0,60
0,83
0,90
1,60
0,80
0,92
0,60
0,77
0,90
0,65
0,75
0,85
0,74
0,97
1,05
WB VI sprinklers are generally spaced in two ways:
- Single sprinkler per tree or strip watering (for watering individual trees)
- Full coverage (where cover crops are grown the sprinkler are spaced between
4 m to 8 m) for herbaceous cultivations
When designing full coverage systems refer to the table below for distribution
uniformity (DU) requirements and desired precipitation rate.
52
WB VI Classic
Precipitation Rate (mm/h)
White
Brown
Green
Blue
Grey
Yellow
Red
Press
(bar)
1,00
1,50
2,00
1,00
1,50
2,00
1,00
1,50
2,00
1,00
1,50
2,00
1,00
1,50
2,00
1,00
1,50
2,00
1,00
1,50
2,00
3x3
4,9 ■
6,2 ■
7,1 ■
6,8 ■
8,5 ■
9,9 ■
8,9 ■
11,0 ■
12,8 ■
12,0 ■
14,9 ■
17,3 ■
13,9 ■
17,2 ■
19,9 ■
17,4 ■
21,4 ■
24,5 ■
23,8 ■
29,5 ■
33,8 ■
4x4
2,8 ■
3,5 ■
4,0 ■
3,8 ■
4,8 ■
5,6 ■
5,0 ■
6,2 ■
7,2 ■
6,8 ■
8,4 ■
9,7 ■
7,8 ■
9,7 ■
11,2 ■
9,8 ■
12,0 ■
13,8 ■
13,4 ■
16,6 ■
19,0 ■
■ < 55 %
square spacing (m x m)
5x5
6x6
1,8 ■
-■
2,2 ■
-■
2,5 ■
-■
2,4 ■
1,7 ■
3,1 ■
2,1 ■
3,6 ■
2,5 ■
3,2 ■
2,2 ■
4,0 ■
2,7 ■
4,6 ■
3,2 ■
4,3 ■
3,0 ■
5,4 ■
3,7 ■
6,2 ■
4,3 ■
5,0 ■
3,5 ■
6,2 ■
4,3 ■
7,2 ■
5,0 ■
6,3 ■
4,3 ■
7,7 ■
5,3 ■
8,8 ■
6,1 ■
8,6 ■
5,9 ■
10,6 ■
7,4 ■
12,2 ■
8,4 ■
■ 55 - 64 %
Distribution
Uniformity (%)
R
S
7x7
-■
-■
-■
1,2 ■
1,6 ■
1,8 ■
1,6 ■
2,0 ■
2,3 ■
2,2 ■
2,7 ■
3,2 ■
2,6 ■
3,2 ■
3,7 ■
3,2 ■
3,9 ■
4,5 ■
4,4 ■
5,4 ■
6,2 ■
8x8
-■
-■
-■
-■
-■
-■
-■
-■
-■
1,7 ■
2,1 ■
2,4 ■
2,0 ■
2,4 ■
2,8 ■
2,4 ■
3,0 ■
3,5 ■
3,3 ■
4,1 ■
4,8 ■
■ 65 - 74 %
3x3
4,9 ■
6,2 ■
7,1 ■
6,8 ■
8,5 ■
9,9 ■
8,9 ■
11,0 ■
12,8 ■
12,0 ■
14,9 ■
17,3 ■
13,9 ■
17,2 ■
19,9 ■
17,4 ■
21,4 ■
24,5 ■
23,8 ■
29,5 ■
33,8 ■
triangular spacing (m x m)
4x4
5x5
6x6
7x7
2,8 ■
1,8 ■
-■
-■
3,5 ■
2,2 ■
-■
-■
4,0 ■
2,5 ■
-■
-■
3,8 ■
2,4 ■
1,7 ■
1,2 ■
4,8 ■
3,1 ■
2,1 ■
1,6 ■
5,6 ■
3,6 ■
2,5 ■
1,8 ■
5,0 ■
3,2 ■
2,2 ■
1,6 ■
6,2 ■
4,0 ■
2,7 ■
2,0 ■
7,2 ■
4,6 ■
3,2 ■
2,3 ■
6,8 ■
4,3 ■
3,0 ■
2,2 ■
8,4 ■
5,4 ■
3,7 ■
2,7 ■
9,7 ■
6,2 ■
4,3 ■
3,2 ■
7,8 ■
5,0 ■
3,5 ■
2,6 ■
9,7 ■
6,2 ■
4,3 ■
3,2 ■
11,2 ■
7,2 ■
5,0 ■
3,7 ■
9,8 ■
6,3 ■
4,3 ■
3,2 ■
12,0 ■
7,7 ■
5,3 ■
3,9 ■
13,8 ■
8,8 ■
6,1 ■
4,5 ■
13,4 ■
8,6 ■
5,9 ■
4,4 ■
16,6 ■
10,6 ■
7,4 ■
5,4 ■
19,0 ■
12,2 ■
8,4 ■
6,2 ■
■ 75 - 84 %
■ 85 - 94 %
8x8
-■
-■
-■
-■
-■
-■
-■
-■
-■
1,7 ■
2,1 ■
2,4 ■
2,0 ■
2,4 ■
2,8 ■
2,4 ■
3,0 ■
3,5 ■
3,3 ■
4,1 ■
4,8 ■
■ > 95 %
Distribution Uniformity (DU) compares the mean of the lowest
25% of precipitation readings to the mean precipitation between
a pattern of sprinkler. It is an indicator of the uniformity of water
application and will highlight any “dry spots” that could occur,
causing plant stress or salinity build up
An acceptable figure for distribution uniformity is equal to or above
75% with less than 65% being deemed unacceptable
All test have been carried out in still conditions (no wind)
Triangular spacing are represented by Sprinkler x Row
Codification
Code
Description
WB VI Classic - No pressure compensating, Standard radius
1014272
WB VI Classic 3/8”male, mini-sprinkler with white nozzle Ø 6,9m; 55 l/h at 1,5 bar
1014273
WB VI Classic 3/8” male, mini-sprinkler with brown nozzle Ø 7,8m; 76 l/h at 1,5bar
1014274
WB VI Classic 3/8” male, mini-sprinkler with green nozzle Ø 9,2m; 99 l/h at 1,5 bar
1014275
WB VI Classic 3/8” male, mini-sprinkler with blue nozzle Ø 9,4m; 134 l/h at 1,5 bar
1014276
WB VI Classic 3/8” male, mini-sprinkler with grey nozzle Ø 9,4m; 155 l/h at 1,5 bar
1014277
WB VI Classic 3/8” male, mini-sprinkler with yellow nozzle Ø 9,4m; 192 l/h at 1,5 bar
1014278
WB VI Classic 3/8” male, mini-sprinkler with red nozzle Ø 10,2m; 265 l/h at 1,5 bar
WB VI Classic - No pressure compensating, Short radius
1014282
WB VI Classic 3/8” male, mini-sprinkler with white nozzle Ø 5,0m; 55 l/h at 1,5 bar
1014283
WB VI Classic 3/8” male, mini-sprinkler with brown nozzle Ø 6,5m; 76 l/h at 1,5 bar
1014284
WB VI Classic 3/8” male, mini-sprinkler with green nozzle Ø 6,5m; 99 l/h at 1,5 bar
1014285
WB VI Classic 3/8” male, mini-sprinkler with blue nozzle Ø 6,0m; 134 l/h at 1,5 bar
Mini Sprinklers
Nozzle
53
WB VII PC
Applications
Ideal for crops in difficult
topographical conditions and in
installations requiring long laterals
Features
Revolutionary pressure compensating design provides uniform flow
also in a wide pressure range
Patented pressure compensating diaphragm assembly
Significantly improved radius
Double bearing ensures spinner stability and long life
Excellent start-up reliability and low maintenance
Improved distribution characteristics with large droplet size being less
susceptible to wind effects
Specifications
Materials: robust and proven sturdy
double framed sprinkler.
Spinner in Nylon. Rubber diaphragm
Anti-insect/dust proof spinner retracts to protect nozzle when not in
operation
Threads: 3/8” male
Low angle of throw for maximizing under foliage penetration
Flow rate: 35 - 152 l/h
New Snap Fit bearing provides easy field disassembly
Operating pressure range: 1,5-4,0 bar
Hook allows for suspension from trellis wire
Recommended operating pressure:
2,5 bar (Maximum Distribution
Efficiency)
Maximum start-up torque obtained from deflector plate to ensure
reliability of start-up and operation in the most hostile environments
Radius: 2,6 – 4,5 m
Balanced spin rate to minimize stake vibration
Available with snap-off deflector
Mini Sprinklers
Easy identification thanks to colour coded nozzles
54
Available with a deflector tab on the spinner to reduce diameter of
throw to approx. 30% (for younger trees irrigation)
WB VII PC
Performance
Orifice
Radius with Max height at
Radius with standard ø (m)* @
(mm)
short ø (m)** 2,5 bar with
1,5 bar 2,0 bar 2,5 bar 3,0 bar 3,5 bar 4,0 bar
standard ø (m)
●WB7PC36
WB7PC36D
0.91 2.6 2.9
2.8
3.0
2.8
2.9
0.3
0,39
●WB7PC47
WB7PC47D
1.07
3.0 3.2
3.3
3.3
3.3
3.3
0.5
0,36
WB7PC57
WB7PC57D
1.17
3.2 3.4
3.4
3.4
3.4
3.3
0.7
0,43
●WB7PC76
WB7PC76D
1.34 3.7 3.8
3.9
3.8
3.8
3.7
0.7
0,33
●WB7PC99
WB7PC99D
1.52 4.2 4.2
4.2
4.2
4.2
4.2
0.7
0,5
● WB7PC118 WB7PC118D 1.81 4.2 4.2
3.8
3.9
3.9
3.8
0.7
0,35
● WB7PC134 WB7PC134D 1.81 4.5 4.5
4.5
4.5
4.5
4.5
0.8
0,5
● WB7PC151 WB7PC155D 1.904.2 4.2
4.2
4.2
4.2
4.2
1.0
0,39
*based on spinner at 250mm above ground level ** based on spinner at 250mm above ground level at (1,5 - 4,0 bar)
Colour Code
1,5 bar
Flow Rate (l/h) standard & short ø @
2,0 bar 2,5 bar
3,0 bar
3,5 bar
4,0 bar
●
WB7PC36
WB7PC36D 3536
36
36
36
36
●
WB7PC47
WB7PC47D 4649
48
48
47
47
WB7PC57
WB7PC57D
5457
57
58
59
59
●
WB7PC76
WB7PC76D 7476
77
76
75
75
●
WB7PC99
WB7PC99D 9697
97
98
98
99
●
WB7PC118 WB7PC118D 120
115 116
●
WB7PC134 WB7PC134D 135
135 134133 134 136
●
WB7PC151 WB7PC155D 151151 152150 149 151
116 116 117
Codification
Code
Description
WB VII PC – Pressure Compensating, Standard Radius
WB7PC36
WB7PC47
WB7PC57
WB7PC76
WB7PC99
WB7PC118
WB7PC134
WB7PC151
WB VII PC 3/8” male, mini-sprinkler with black nozzle Ø 2,8m, 36 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with azure nozzle Ø 3,3m, 47 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with white nozzle Ø 3,4m, 57 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with brown nozzle Ø 3,9m, 76 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with green nozzle Ø 4,2m, 99 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with violet nozzle Ø 3,8m, 118 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with blue nozzle Ø 4,5m, 134 l/h at 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with grey nozzle Ø 4,2m, 151 l/h at 2,5 bar
WB VII PC – Pressure Compensating, Short Radius
WB7PC36D
WB7PC47D
WB7PC57D
WB7PC76D
WB7PC99D
WB7PC118D
WB7PC134D
WB7PC151D
WB VII PC 3/8” male, mini-sprinkler with black nozzle Ø 0,3 m, 36 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with azure nozzle Ø 0,5 m, 47 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with white nozzle Ø 0,7 m, 57 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with brown nozzle Ø 0,7 m, 76 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with green nozzle Ø 0,7 m, 99 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with violet nozzle Ø 0,7 m, 118 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with blue nozzle Ø 0,8 m, 134 l/h a 2,5 bar
WB VII PC 3/8” male, mini-sprinkler with grey nozzle Ø 1,0 m, 151 l/h a 2,5 bar
Mini Sprinklers
Colour Code
55
56
FILTERS
*For operating specifications and how to choose the right model, see the Appendix on page 93
57
M Series Small plastic filters
Specifications
Features
From ¾” at 1” 1/2 male thread
Max working pressure: 10 bar
Cartridge:
- Stainless steel screen - 150 mesh
- Plastic discs - 150 mesh
Body and lid in polypropylene,
Glass-fibre-reinforced Nylon
Locking ring
M Filter – Head loss chart
Models
Filtering surface:
- Screen cartridge 135 cm2
- Discs cartridge 170 cm2
O-Ring in Buna-N
Intermediate dimensions
between S and F models
½” male outlet
(with optional cap)
for quick flushing
Technical Features
Inlet/Outlet
male
MicronMesh
Code screen filter
Code disc filter
M20
EU-ABF2015-2MW
EU-ABF2015-3MW
3/4”
100
~ 150
100
M25
EU-ABF2515-2MW
EU-ABF2515-3MW
1”
100
~ 150
120
M32
EU-ABF3215-2MW
EU-ABF3215-3MW
1” 1/4
100
~ 150
180
M40
EU-ABF4015-2MW
EU-ABF4015-3MW
1” 1/2
100
~ 150
250
FILTERS
The maximum flow rates indicated in the tables refer to a head loss of 0.5 bar (clean water)
58
Max flow
(l/min)
Model
Codification
Code
Description
EU-ABF2015-2MW
3/4” male Screen M Filter – 150 mesh
EU-ABF2515-2MW
1” male Screen M Filter - 150 mesh
EU-ABF3215-2MW
1” 1/4 male Screen M Filter - 150 mesh
EU-ABF4015-2MW
1” 1/2 male Screen M Filter - 150 mesh
EU-ABF2015-3MW
3/4” male Disc M Filter - 150 mesh
EU-ABF2515-3MW
1” male Disc M Filter - 150 mesh
EU-ABF3215-3MW
1” 1/4 male Disc M Filter - 150 mesh
EU-ABF4015-3MW
1” 1/2 male Disc M Filter - 150 mesh
S and F Series Small plastic filters
Specifications
Features
From 3/4” at 1/2” male thread
Cartridge:
- Stainless steel screen - 150 mesh
- Plastic discs - 150 mesh
S Filter – Head loss chart
Body and lid in polypropylene,
Glass-fibre-reinforced Nylon
Locking ring
Models
Filtering surface:
- Screen cartridge 114 cm2 (S Filter)
- Screen cartridge 225 cm2 (F Filter)
- Discs cartridge 280 cm2 (F Filter)
O-Ring in Buna-N
Easy to dismount for easy cleaning
F Filter – Head loss chart
½” male outlet (with optional cap) for
quick flushing
Models
Technical Features
Model
Code screen filter
Code disc filter
Inlet/Outlet
male
Micron
Mesh
Max flow
(l/min)
F20-S
EU-ABF2015-2SW
–
3/4”
100
~ 150
80
F25-S
EU-ABF2515-2SW
–
1”
100
~ 150
80
F25
EU-ABF2515-2FW
EU-ABF2515-3FW
1”
100~ 150
200
F32
EU-ABF3215-2FW
EU-ABF3215-3FW
1” 1/4
100
~ 150
250
F40
EU-ABF4015-2FW
EU-ABF4015-3FW
1” 1/2
100
~ 150
300
Codification
Code
Description
EU-ABF2015-2SW
¾” male Screen S Filter - 150 mesh
EU-ABF2515-2SW
1” male Screen S Filter - 150 mesh
EU-ABF2515-2FW
1” male Screen F Filter - 150 mesh
EU-ABF3215-2FW
1” 1/4 male Screen F Filter - 150 mesh
EU-ABF4015-2FW
1” 1/2 male Screen F Filter - 150 mesh
EU-ABF2515-3FW
1” male Discs F Filter - 150 mesh
EU-ABF3215-3FW
1” 1/4 male Discs F Filter - 150 mesh
EU-ABF4015-3FW
1” 1/2 male Discs F Filter - 150 mesh
FILTERS
The maximum flow rates indicated in the tables refer to a head loss of 0.5 bar (clean water)
59
XD Series Big Plastic Filters
Features
Innovative disc design
Discs cartridge: 120, 150, 200 mesh
Glass-fibre-reinforced Nylon body lid
and locking ring
Filtering surface:
- 2” and 3” model with short lid: 10.800 cm2
- 3” model: 18.000 cm2
Ring-nut closure for easy assembly/disassembly
Pressure gauge connections to be perforated as
required, to allow measurement of pressure and
thus the cleanliness of the filter
The filter allows very long cleaning intervals
Specifications
1’’ Male thread to drill to use the air release valves
2 Gauge mounting points 1/4” female Gas
Flow rates:
- 2” Model: 25 m3/h
- 3” Model (short and standard lid): 50 m3/h
Dimensions:
- 2” Model: L-274 mm; H-540 mm
- 3” Model: L-320 mm; H-785 mm
FILTERS
Advantage
60
The special disc design allows not
performing filtration on the outer
surface of the cartridge, but rather to
utilise the entire raised sinusoidal path
on the disc: filtration occurs between
the discs.
This patented system allows reaching
a filtering surface area absolutely
unachievable (with the same
dimensions) by any other “standard”
disc filter.
XD Series Big Plastic Filters
Head Loss (m)
2” head loss table
Flow rate (m3/h)
Head Loss (m)
3” head loss table
Flow rate (m3/h)
Code
Description
EU-ABF5012-3X
2” male XD disc Filter, 120 mesh
EU-ABF5015-3X
EU-ABF5020-3X
EU-ABF7512-3XS 3” male XD disc Filter short lid, 120 mesh
FILTERS
Codification
EU-ABF7512-3X
EU-ABF7515-3X
EU-ABF7520-3X
61
SD Series Big Plastic Filters
Features
Discs cartridge: 120 and 150 mesh
Glass-fibre-reinforced Nylon body lid and locking ring
Filtering surface:
- 2” and 3” model with short lid: 1.200 cm2
- 3” model: 2.000 cm2
Ring-nut closure for easy assembly/disassembly
Pressure gauge connections to be perforated as required, to allow
measurement of pressure and thus the cleanliness of the filter
Specifications
1’’ Male thread to drill to use the air release valves
2 Gauge mounting points 1/4” female Gas
Flow rates:
- 2” model: 25 m3/h
- 3” model (short and standard lid): 50 m3/h
FILTERS
Dimensions:
- 2” Model: L-274 mm; H-540 mm
- 3”Model: L-320 mm; H-785 mm
62
Codification
Code
Description
EU-ABF5012-3S
2” male SD disc filter 120 mesh, standard disc
EU-ABF5015-3S
EU-ABF7512-3SS
3” male SD disc filter short lid, 120 mesh, standard disc
EU-ABF7515-3SS
3” male SD disc filter short lid, 150 mesh, standard disc
EU-ABF7512-3S
EU-ABF7515-3S
63
FILTERS
64
Controllers
65
Filcom
Specifications
It may work with AC or DC power
Input 50/60 Hz 230 VAC
Output 24 VAC ± 9.....30 VDC
Transformer power: 24 VA
Features
Fuse: 1A
Controller created precisely for filter backflush
2, 4, 6 stations (on the 4 and 6 stations it is possible
to control also the pressure sustaining valve)
Set interval between complete backflush cycles:
- in minutes (from 10 to 90 minutes,
10 by 10 minutes)
- in hours (from 2 to 24, 1 by 1 hours)
- it is possible to choose to have this interval
set by the differential pressure sensor
Set the backflush time per station:
- from 0 to 90 seconds (5 by 5 seconds)
- from 2 to 10 minutes (1 by 1 minutes)
Set the delay between 2 stations: from 0 to 90
seconds (5 by 5 seconds)
It is possible to set the delay for the reaction of the
differential pressure sensor: from 5 to 90 seconds
Permanente memory
It is possible to set the duration of the impulse to the
latching solenoids from 10 to 99 ms
It may work with 24 VAC, 24 VDC, 12 VDC,
latching (2 wire 9-12VDC) solenoids
Output to the stations (working in AC):
24 VAC
Max total controller output: 0.8 A
Output to the stations (working in DC):
32 VDC
Max total controller output DC: 0.8 A
Output to the stations (working in latching):
32 VDC
Max total controller output (latching): 5A
latching
Duration of the impulse to latching
solenoids: 10-99 ms
Consumption working in DC: 85 uAh (Stand
by and Cycles)*
Consumption working in DC: <45mAh
(During the programming)*
*Exclusive of the consumption of the valves
Controllers
Number of the cycles execute after last reset is
showed on display
66
1 led (Alarm) signal if a short cut has happened or if
the differential pressure sensor has been actived
Two digit display
Each one of 6 led (related to the 6 stations) flashes
when the station is working
Codification
Code
Description
IT-FILCOM2
Filcom controller for filter backflush 2 stations, AC, DC latching solenoid
IT-FILCOM4
IT-FILCOM6
DC
Features
4,6,8 stations
2 independent programs
3 starts per program
Watering time: from 1 at 599 minutes
(in 1 minute increments)
Days schedule: 7 days “select days”
or “skip days” interval 1-14 days
Specifications
Water Budget: 10%-200%
Stacking program
9V Alkaline battery
Pump Start/Master Valve
Output to solenoid is 12V
Rain off function
Operate 9V valves with latching
solenoid 9V, 2 wires, 2 or 3 ways
Program erase
Codification
Code
Description
DC-4
DC 4, battery-powered electronic controller, 4 stations
DC-6
DC-8
DC-4-EXT
DC 4, battery-powered electronic controller, 4 stations, outdoor
DC-6-EXT
DC-8-EXT
Controllers
Low battery indication
67
Multi Program
Specifications
External transformer 19,2 VAC
9V alkaline battery to run the controller
program and keep real time during power
failure
Features
Operate electric valve 24VAC
Maximum output:
- Max per station: 24VAC (0,35Amp)
- Max total: 24VAC (0,5Amp)
4,6,8 stations
Individual station programming
3 starts per day for each station
Watering time: 1 minute to 9 hours and 59
minutes (in 1 minute increments)
Days schedule: 7 days “selec a day” or “skip
days” interval from 1-30 days
Water Budget: 10%-200%
Stacking program
Pump Start/Master Valve
Rain off function
Program erase-total erase
Power failure indication
Manual operating per station or semi-auto of all
programmed stations
Self-diagnostic circuit breaker identifies override
and display electric multifunction of a station
Controllers
“Copy” feature allows quick copy of data from
previous station
68
Codification
Code
Description
MP-4
Multi Program 4 station controller, with external transformer 24VAC
MP-6
MP-8
MP-4-EXT
Multi Program 4 station controller, with built-in transformer 24VAC
MP-6-EXT
MP-8-EXT
69
Controllers
70
Fertigation
71
Mazzei Injectors*
Applications
Injectors created for the injection of liquids by
pressure difference. The Mazzei injectors offer a safe,
precise and economic method to inject practically and
kind of liquid or gas a pressurized current.
Features
Body in Polypropylene (PP) and Kynar (PVDF)
No external power source is required in most
installations
Low maintenance costs
Suitable for continuous mixing, without requiring
additional equipment
Specifications
Male thread: from ½” to 2”
Flow rate: 1,10-598 l/min
Inlet pressure: 0,35-8,44 bar
Codification
They require a negligible pressure difference between
inlet and outlet to create a feed through the suction orifice
Body in PP (Polypropylene) - Green
Code
Description
AIC287-P
Model 287 - Inlet/Outlet M 1/2” NPT - Suction Barbed M 1/4” - with check valve (Black)
AIC584-PPG
Model 584 - Inlet/Outlet M 3/4” BSPT - Suction Barbed 6,35 mm / Thread M 1/4” - with check valve
AIC885-PPG
Model 885 - Inlet/Outlet M 1” BSPT - Suction Barbed 12,70 mm / Thread M 1/2” - with check valve
AIC1078-PPG Model 1078 - Inlet/Outlet M 1” BSPT - Suction Barbed 12,70 mm / Thread M 1/2” - with check valve
AIC1583-PPG Model 1583 - Inlet/Outlet M 1” 1/2 BSPT - Suction Barbed 12,70 mm / Thread M 1/2” - with check valve
AIC2081-PPG Model 2081 - Inlet/Outlet M 2” BSPT - Suction Thread M 1” 1/4 - with check valve
Fertigation
Body in PVDF (Kynar)
Code
Description
AIC287
Model 287 - Inlet/Outlet M 1/2” NPT - Suction Barbed M 1/4” - with check valve
AIC484
Model 484 - Inlet/Outlet M 3/4” BSPT- Suction Barbed 6,35 mm / Thread M 1/4” with check valve
AIC584
Model 484-X - Inlet/Outlet M 3/4” BSPT- Suction Barbed 6,35 mm / Thread M 1/4” with check valve High Suction for Greenhouses
Model 584 - Inlet/Outlet M 3/4” BSPT- Suction Barbed 6,35 mm / Thread M 1/4” with check valve - High Flow
AIC885
Model 885-X - Inlet/Outlet M 1” BSPT- Suction Barbed 12,70 mm / Thread M 1/2” with check valve
AIC1078
Model 1078 - Inlet/Outlet M 1” BSPT- Suction Barbed 12,70 mm / Thread M 1/2” with check valve
AIC1583
Model 1583 - Inlet/Outlet M 1” 1/2 BSPT- Suction Barbed 12,70 mm / Thread M 1/2” with check valve
AIC2081
Model 2081 - Inlet/Outlet M 2” BSPT- Suction Thread M 1” 1/4 with C75R-BSPT check valve and AMA20 adapter
AIC3090
Model 3090 - Inlet/Outlet M 3” BSPT- Double Suction Thread M 1” 1/2 without check valve
AIC4090
Model 4090 - Inlet/Outlet M 4” BSPT- Double Suction Thread M 2” without check valve
AIC484-X
*For operating specifications and how to select the right model, see the Appendix at page 95.
For accessories, see the section at page 85.
72
Mazzei Injectors
Performance
b
Inlet
bar
Outlet
bar
AIC
287 1/2”
AIC
484-X 3/4”
AIC
484 3/4”
AIC
584 3/4”
AIC
1078 1”
AIC
1583 1 1/2”
AIC
2081 2”
Injector Suction Injector Suction Injector Suction Injector Suction Injector Suction Injector Suction Injector Suction
Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
00,331,480,921,846,408,5739,70
0,070,161,050,661,822,935,3339,70
0,350,141,100,114,500,754,500,427,911,8020,741,4040,603,36122,6039,70
0,210,080,460,061,600,17 -13,50
0,28---
0,63--8,60
00,391,881,181,786,6713,8739,70
0,140,301,460,881,784,789,0739,70
0,700,351,210,126,400,756,400,3811,201,7329,302,6457,404,97173,4029,50
0,490,050,240,180,841,212,65 9,40
0,56---
0,69
0,28-1,90
00,432,441,181,786,3914,2139,80
0,350,261,320,721,765,0410,3339,30
1,050,491,590,187,830,997,830,5213,701,7735,884,0870,307,85212,3036,40
0,700,08 -0,060,882,165,4613,40
0,84 - - -0,701,070,92 4,80
00,442,491,141,576,2014,3939,80
0,350,381,740,991,576,0212,9639,80
1,410,701,930,219,010,849,010,6015,821,5041,454,4281,209,06245,3029,50
0,840,120,530,491,213,258,3118,80
1,050,03 -0,060,921,914,18 9,60
00,492,501,131,596,0514,3139,80
0,350,442,031,091,596,1014,2839,80
1,760,702,200,2810,111,3910,110,8717,681,5946,335,6490,8012,23274,4039,50
1,050,150,630,471,314,309,3425,50
1,41 - -0,060,772,013,09 8,50
00,502,511,091,605,9514,2939,80
0,350,502,411,081,605,9614,2839,80
0,702,460,3511,051,8211,051,0519,381,5750,765,9699,5013,35300,5039,80
2,11
1,050,231,070,711,595,1810,5532,30
1,410,11 -0,451,153,507,9221,50
1,76 - - -0,731,131,15 3,90
00,512,541,091,615,9314,3039,80
0,350,502,481,101,615,9314,2939,80
2,460,702,650,4311,962,1411,961,1020,931,6054,845,96107,4014,14324,4039,80
1,050,321,531,101,595,8012,9839,50
1,410,190,930,701,384,6810,4029,00
1,760,07 -0,251,042,985,6216,10
00,512,571,081,625,8814,3439,80
0,350,512,441,121,615,8814,4339,80
0,700,472,431,121,625,8814,3339,80
2,811,052,840,4012,761,8912,761,1222,371,6158,635,88114,8013,91347,1039,80
1,410,271,310,961,595,7912,1733,00
1,760,170,410,721,354,569,6824,90
2,110,02 -0,250,952,695,1410,70
00,512,611,091,635,8614,3839,80
0,350,512,461,091,645,8614,4039,80
0,700,512,391,101,645,8614,3839,80
1,053,070,4413,552,2113,551,1023,731,6362,195,86121,8014,10367,9039,80
3,16
1,410,351,701,051,625,9213,4038,30
1,760,251,150,871,495,4811,0332,00
2,110,15 -0,651,224,187,1321,50
2,46 - -0,230,852,322,97 9,40
00,522,631,101,615,8314,3539,80
0,350,522,551,101,615,8314,3539,80
0,700,522,471,121,615,8314,2839,80
1,050,502,361,121,615,8314,2339,80
3,521,413,220,3714,271,8614,271,1225,021,6065,565,83128,4014,16388,0039,80
1,760,281,281,041,545,8312,8537,10
2,110,190,520,801,365,4510,8828,60
2,460,08 -0,490,994,067,6118,90
2,81 - - -0,182,212,55 7,30
Fertigation
Pressure
a
73
Mazzei Injectors
Performance
Fertigation
Pressure
74
a
b
Inlet
bar
Outlet
bar
AIC
287 1/2”
AIC
484-X 3/4”
AIC
484 3/4”
AIC
584 3/4”
AIC
1078 1”
AIC
1583 1 1/2”
AIC
2081 2”
Injector Suction
Injector Suction Injector Suction Injector Suction Injector Suction
Injector Suction Injector Suction
Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate Flow rate
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
l/min
0
0,52
2,68 1,12 1,67
5,85 14,49 39,80
0,35 0,52
2,67 1,12 1,67
5,85 14,44 39,80
0,70 0,49
2,42 1,12 1,67
5,85 14,45 39,80
1,05 0,49
2,40 1,12 1,67
5,85 14,32 39,80
4,22 1,41 3,480,4915,632,37 15,631,12 27,401,65 71,80 5,85 140,7014,37
425,10 39,80
2,11 0,36
1,46 1,09 1,60
5,87 13,03 37,90
2,46 0,26
0,71 0,96 1,50
5,79 11,50 32,10
2,81 0,17 - 0,76 1,27
4,87 9,33 24,00
3,16 0,04 - 0,25 0,91
2,80 5,18 13,70
0 0,52
2,67 1,14 1,63
5,89 14,43 39,80
0,39 0,52
2,68 1,14 1,63
5,89 14,43 39,80
0,70 0,52
2,49 1,08 1,64
5,89 14,43 39,80
1,05 0,52
2,35 1,08 1,64
5,89 14,43 39,80
4,92 1,41 3,750,52
16,882,25 16,88
1,08 29,601,63 77,55 5,89 151,9014,43
459,10 39,80
2,11 0,47
1,98 1,08 1,62
5,90 14,24 39,80
2,81 0,30
1,03 1,03 1,62
5,83 12,53 33,40
3,16 0,22
0,57 0,85 1,47
5,16 10,07 27,80
3,52 0,11 - 0,72 1,06
3,44 7,85 20,60
3,87
- - 0,09 0,57
1,82 2,73 9,00
0
0,52
2,67 1,07 1,65
5,92 14,61 39,80
0,35 0,52
2,65 1,07 1,60
5,92 14,61 39,80
0,70 0,52
2,64 1,07 1,65
5,92 14,61 39,80
1,05 0,52
2,57 1,07 1,65
5,92 14,61 39,80
5,62 1,41 4,010,5218,052,57 18,051,02 31,641,66 82,89 5,92 162,4014,61
490,50 39,80
2,11 0,51
2,51 1,03 1,66
5,92 14,61 39,80
2,81 0,40
1,70 1,00 1,66
5,98 13,91 38,10
3,52 0,26
0,43 0,94 1,58
5,77 11,19 31,90
4,22 0,06 - 0,39 1,08
3,34 5,88 17,00
4,57 - - - 0,50
2,08 0,76 3,80
0 0,52
2,67 0,86 1,71
5,96 14,47 39,80
0,35 0,52
2,65 0,86 1,71
5,96 14,47 39,80
0,70 0,52
2,57 0,86 1,71
5,96 14,47 39,80
1,41 0,52
2,57 0,86 1,73
5,96 14,47 39,80
6,33 2,11 4,280,5219,152,49 19,150,86 33,571,72 87,93 5,96 172,3014,47
520,40 39,80
2,81 0,50
2,11 0,86 1,72
6,03 14,45 39,80
3,52 0,36
1,66 0,86 1,72
5,95 13,74 38,00
4,22 0,22 - 0,84 1,54
5,34 11,22 28,90
4,92 0,01 - 0,27 0,84
2,50 3,10 11,30
5,27
- - - 0,33
1,30 -
-
0
0,49
2,68 0,84 1,81
5,94 14,64 39,80
0,35 0,49
2,65 0,84 1,81
5,94 14,64 39,80
0,70 0,49
2,57 0,84 1,81
5,94 14,64 39,80
1,41 0,49
2,50 0,84 1,84
5,94 14,64 39,80
7,03 2,11 4,50
0,49
20,172,57 20,170,84 35,391,83 92,69 5,94 181,6014,64
548,40 39,80
2,81 0,47
2,21 0,84 1,82
5,94 14,64 39,80
3,52 0,45
1,71 0,83 1,82
5,93 14,41 39,20
4,22 0,33
0,96 0,84 1,79
5,99 13,01 37,50
4,92 0,19 - 0,81 1,47
5,13 9,25 26,00
5,62
- - 0,06 1,06
1,93 1,62 7,60
0 0,40
2,89 0,78 2,03
5,96 -
39,80
0,35 0,40
2,77 0,78 2,03
5,96 -
39,80
0,70 0,40
2,73 0,78 2,03
5,96 -
39,80
1,41 0,40
2,65 0,78 2,03
5,96 -
39,80
2,11 0,40
2,54 0,78 2,03
5,96 - 39,80
8,44 2,81 5,000,4022,102,32 22,100,77 38,762,01 101,60 5,96 -
598,00 39,80
3,52 0,38
2,02 0,77 2,01
5,96 - 39,80
4,22 0,37
1,57 0,77 2,00
6,01 - 38,60
4,92 0,30
1,29 0,77 2,00
5,96 - 37,50
5,62 0,23 - 0,77 1,80
5,73 - 33,00
6,33 0,09 - 0,74 1,08
3,86 - 19,50
7,03
- - - 0,69
1,41 - -
Dosatron* Water Powered Proportional Injectors
Applications
Fertigation, Phytosanitation, PH/TH
Correction, Flocculation.
D3
Features
Motor: Different hydraulic piston with mixing
chamber integrated
The injection is internal at the outlet
Suction: Self-priming
Built-in air bleeder
Specifications
Male thread ¾”
Injection Range: 0,2 - 2%
Water flow range*: 10,0 l/h – 3,0 m3/h
Operating pressure: 0,3 – 6,0 bar
Concentrated additive injection: 0,02 – 60,0 l/h
Options*
Operating water temperature: 5°- 40°
Repeatability: ± 3% (Standard API 675)
Pressure loss: 0,2-2,3 bar (depending on operating
conditions)
Recommended seals for alkaline
concentrate
Special kit for viscous concentrate
Motor capacity: 0,53 l – 1 cycle for every
By-pass
Maximum vertical or horizontal suction of the
concentrate: 4 m
External injection
*For operating unit with other fluids than water, please contact our technical
office
*Contact our technical office to help determine
what option you may need.
Codification
Code
Description
D3GL2VF
Dosatron ¾”, flow rate 10,0 l/h-3,0 m3/h, injection 0,2-2%, pressure 0,3-6,0 bar
Fertigation
Average dosing accuracy: ± 10% (chart on demand)
*For operating specifications and how to select the right model, see the Appendix at page 95.
75
Dosatron Water Powered Proportional Injectors
D8
Features
chamber integrated
The injection is internal at the outlet
Internal motor filter: 32 mesh
Built-in anti-siphon device
Specifications
Male thread 1 ½”
Injection Range: 0,2 - 2%
Water flow range*: 500 l/h – 8,0 m3/h
Concentrated additive injection: 1,0 – 160 l/h
Fertigation
76
conditions)
Options
Maximum vertical or horizontal suction of the concentrate:
4m
* For operating unit with other fluids than water, please contact our technical
office
concentrate
Special kit for viscous concentrate
By-pass
Codification
what option you may need
Code
Description
D8RVF
Dosatron 1 1/2”, flow rate 500 l/h-8 m3/h, injection 0,2-2%, pressure 0,15-8 bar
D45
Features
chamber integrated
The injection is internal at mid-cycle
Built-in-by-pass
Options
concentrate
External injection
Specifications
Male thread 1 ¼”
Injection Range: 0,2 – 1,5%
Water flow range*: 100 l/h – 4,5 m3/h
conditions)
concentrate: 4 m
* For operating unit with other fluids than water, please contact
our technical office
Codification
Code
Description
D45RE15VF
Dosatron 1 1/4”, flow rate 100 l/h-4,5 m3/h, injection 0,2-1,5%, pressure 0,5-5,0 bar
Fertigation
77
D20
Features
chamber integrated
The injection is pre-diliution at the outlet
Internal motor filter: 32 mesh
Built-in-by-pass
Built-in anti-siphon device
Specifications
Options
Male thread 2”
concentrate
Injection Range: 0,2 – 2%
Water flow range*: 1– 20 m3/h
Operating pressure: 0,12 – 10 bar
Fertigation
78
conditions)
Motor capacity: 5 l – 1 cycle for every
concentrate: 4 m
* For operating unit with other fluids than water, please contact our technical
office
Codification
Code
Description
D20SVFE
Dosatron 2”, flow rate 1,0-20 m3/h, injection 0,2-2%, pressure 0,12-10 bar
79
Fertigation
80
ACCESSORIES
81
Tape and Dripline
Accessories
Fittings for Aqua-Traxx and Neptune
Starter for Aqua-Traxx and Neptune 16mm e 22mm (for HDPE/PVC from Ø 40 to Ø110 mm)
IT-FGA645
Starter 3/8” M for tape 16 mm
IT-FGA646
Starter 3/4” M for tape 16 mm
IT-FVT3957
Starter Mini Valve 3/8” M for tape 16 mm
IT-FVT3966
Starter Mini Valve barbed 15 mm for tape 16 mm
IT-FGA638
Starter barbed 15 mm with rubber for tape 16 mm
IT-FGA6461
Starter threaded 3/4” M for tape 22 mm
IT-FCP641
Starter barbed from hose Ø 16 mm for tape 16 mm
IT-FCP6411
Starter barbed from hose Ø 20mm for tape 22
IT-FRUB
Spare rubber for 16 mm Tape starter (IT-FVT3966 and IT-FGA638)
ACCESSORIES
Accessories for Aqua-Traxx and Neptune 16mm and 22mm (for HDPE/PVC from Ø 40 to Ø110 mm)
82
IT-FCC636
Coupling for Tape 16 mm
IT-FCC6361
Coupling for Tape 22 mm
IT-FGP668
Expander gasket for Poly/PVC for starter 3/8” M
IT-FHP660
Drill cup Ø 15 mm for starter barbed 15 mm
IT-FHP661
Drill cup Ø 18 mm for IT-FGP668
Accessories for Aqua-Traxx and Neptune 16mm (for HDPE from Ø 25 to Ø32 mm)
IT-FGA06
Starter 6 mm barbed for tape 16 mm (to use with puncher IT- FMP04)
IT-FGA98
Starter 15 mm barbed with rubber for tape 16 mm
IT-FGA637
Starter 10 mm barbed for tape 16 mm
IT-FMP457
Puncher 7 mm for barbed starter 10 mm
Tape and Dripline Accessories
Fittings for Neptune HW, Neptune PC, Drip In and Hose
Starter for Dripline
IT-FGA619
Starter barbed 10 mm for Dripline 16 mm
IT-FGA6191
Starter threaded 3/8“ M for Dripline 16 mm
IT-FGA620
Starter barbed 10 mm for Dripline 20 mm
IT-FGA6192
Starter threaded 3/8“ M for Dripline 20 mm
IT-FGP621
Starter barbed 15 mm with rubber for Dripline 16 mm
IT-PGP622
Starter barbed 15 mm with rubber for Dripline 20 mm
Coupling for Dripline
IT-FCC617
Coupling for Dripline 16 mm
IT-FCC618
Coupling for Dripline 20 mm
IT-FGT676
Plug 3/8” M for Dripline 16 mm and 20 mm
IT-IPS1501
Locator stake 16 mm
1011231
End stop for Dripline 16 mm
1011233
End stop for Dripline 20 mm
Accessories for Ag Flat
IT-FGP655
Grommet threaded 3/8” M for Ag Flat
IT-FSP675
Nipple 3/8” F x 3/8” F
IT-FLP665
Puncher for Ag Flat - 14 mm
ACCESSORIES
Accessories for Dripline
83
Filters Accessories
S, F and M Series Accessories
Code
Description
EU-AMP0004-1S
Screen cartridge for S Filter
EU-AMP0004-2F
Screen cartridge for F Filter
EU-AMP0004-4F
Discs cartridge for F Filter
EU-AMP0004-7M
Screen cartridge for M Filter
EU-AMP0004-4M
Yellow discs cartridge for M Filter
EU-ATP1115
Kit with 10 caps for small plastic filters (1/2” Female)
SD Series Accessories
Code
Description
EU-AMPS204-120
Disc Cartridge for SD 2” and 3” short lid - 120 mesh (blue)
EU-AMPS204-150
Disc Cartridge for SD 2” and 3” short lid - 150 mesh (red)
EU-AMPS304-120
Disc Cartridge for SD 3”, 120 Mesh (blue)
EU-AMPS304-150
Disc Cartridge for SD 3”, 150 Mesh (red)
ACCESSORIES
XD Series Accessories
84
Code
Description
EU-AMPX204-120
Disc Cartridge for XD 2”, 120 Mesh (blue)
EU-AMPX204-150
Disc Cartridge for XD 2” and 3” short lid, 150 Mesh (red)
EU-AMPX204-200
Disc Cartridge for XD 2” and 3” short lid, 200 Mesh (brown)
EU-AMPX304-120
Disc Cartridge for XD 3”, 120 Mesh (blue)
EU-AMPX304-150
Disc Cartridge for XD 3”, 150 Mesh (red)
EU-AMPX304-200
Disc Cartridge for XD 3”, 200 Mesh (brown)
Mazzei Injectors Accessories
Suction Kit Assemblies
Code
Description
AAK184 (484 & 584)
1/4”. Tubing - clear vinyl, 2 meters long + Strainer for 3/4” models + Tube Clamps (2 used) + Metering Valve MV25
1/2”. Tubing - clear vinyl, 2 meters long + Strainer for 1” and 1 1/2” models + Tube
Clamps - (2 used) + Metering Valve MV50
Economy Suction Line Kit for 1” & 1 ½” Injectors, kit includes 1,8 m clear vinyl
tubing 12,7x19 mm; ½” PVC Ball Valve; 4 Tube Clamps; AS-50HB Strainer; 2 TA-550F
Tubing Adapters
Economy Suction Line Kit for 2” Injectors, kit includes 1,8 m clear vinyl tubing
25x41,3 mm; 1” PVC Ball Valve; 2 Stainless Steel Clamps; AS-87 Strainer; C75-CVA
Check Valve; misc. PVC Fittings
AAK183 (885X & 1078
& 1583)
AAKR183
AAKR282
Check Valve Rebuild Kits
Code
Description
ACR-1
ACR-2
ACR-3
ACR-4
Model CR-1, Spring not included for ½” Injectors (spring not included)
Model CR-2, for ¾” Injectors
Model CR-3, for check valve ACP83
Model CR-4, 1” & 1 ½” Injectors
Metering Valves
Code
Description
0,50” Metering valve, customized “V
Port” charaterized seat control
0,25” Metering valve, for 0,50” & 0,75”
AVHV-25
Injectors - Polypropylene
AMVH-IR-150 0,50” Metering valve, for 1.0” & 1,5”
Injectors - Polypropylene
AVHV-5
Check Valves
Code
Description
ACP83* Model C-83P, for MAZZEI
Injector model 1078*
Model C-86, for MAZZEI
ACP86 Injector model 2081
*Model C-83P, for MAZZEI Injector model 1078 old style
with ½” female suction port
Code
Description
AS-25HB
AS-50HB
AS-84006
AS-84120
AS-87
Strainer, 1/4” Hose Barb Connection
Strainer, 1/2” Hose Barb Connection
Strainer for suction lines for 0.50” & 0.75” injectors
Strainer for suction lines for new-style (-02 and -03) 1.0” & 1.5” injectors
PVC strainer for 1.0” suction lines used on 2.0” injectors
Suction Port Caps
Code
Description
AICAP-25
AICAP-50
AICAP-75
AICAP-75-PPG
AICAP-287
Suction Port Caps for 3/4” injector
Suction Port Caps for 1” injector
Suction Port Caps for 1” 1/2 injector
Suction Port Caps for 1” 1/2 injector - Polypropylene
Suction Port Caps for injector model AIC287 (1/2”)
ACCESSORIES
Strainers
85
Various Accessories
Microtube
Code
Description
IT-EHD503-1
Microtube 3x5mm semi-rigid PVC
IT-EHD504-1
Microtube 4x6mm semi-rigid PVC
IT-EHD608
Microtube 5x8mm soft PVC
Microtube Accessories
Code
Description
EU-IPS0304-1
Microtube stakes: 3,2x5mm – 4x6mm – 4x7mm
FCC0400
Microtube coupling 4mm
IT-FCC0500
Microtube coupling 5mm
FEE0400
Microtube elbow 4mm
FTT0400
Microtube Tee 4mm
FPG01
Plug 4mm
WB Accessories
Code
Description
EU-IPG10091
Adapter for per IT-IPS0406-1. 3/8” female inlet for plastic stake barbed Ø 5mm
ACCESSORIES
EU-IPG10091-1 Adapter for IT-IPS0406-1. 3/8” female inlet for plastic stake barbed Ø 6mm
86
EU-IPS0406-1
Stake for adapter 40cm
1014372
Black stake 36cm with adapter and barbed inlet + microtube Ø 5x7mm 60 cm
Filcom Controller Accessories
Code
Description
IT-GMP20DP
Murphy pressure differential manometer
IT-ASPFIL
Metal support to assemble Filcom controller and Murphy manometer
Air release valve
ApplicationsOperation
At start-up as water enters irrigation
system the valve extracts air that is in
the system.
Valve designed to extract air from pipes, large filters, tanks
or any similar equipment which must work without the
presence of air.
Kinetic Valve 1” and 2”
Automatic Valve 2”
The release stage ends as water
reaches the inside of the valve raising the
float and closing the main discharge outlet.
At system shutdown the valve prevents pipe
collapse by allowing atmospheric air into the
system to restore the inside of the system to zero
pressure.
The release stage continues to
extract air automatically.
It permits to water to enter only to
the arrest of the system.
Air release valve 1”
kinetic and automatic
Kinetic and Automatic Valve 2”
The release stage ends as water reaches the
inside of the valve. It exerts continuous automatic
control, eliminating any residual pocket of air that
might reach the valve, as when this happens, the float
drops, partially or totally opening the discharge outlet.
It prevents pipe collapse, because pressure decreasing.
Specifications
Kinetic KineticAutomaticDouble
valve 1” valve 2”
Valve
effect
Working pressure (bar)
ARV-1-K ARV-2-KARV-1-AARV-2-KA
15,51 15,5111,715,51
totally sealed from (bar)
0,2 0,2 volume of air release in m3/h
without valve closing and 5011002 without the presence of water
ARV-1-K 1”(kinetic)
ARV-1-A 1”(automatic)
0,20,2
701002
Air release valve 2”
kinetic and double effect
ACCESSORIES
Code
Release air volume @ 0,34 bar
44 442 5238
(m3/h)
Codification
Codice
Descrizione
ARV-1-K
Kinetic air release 1” male threaded
ARV-1-A
Automatic air release valve 2” male threaded
ARV-2-K
Kinetic air release 2” male threaded
ARV-2-KA
Automatic and kinetic air release valve 2” male threaded
ARV-2-K 2”
ARV-2-KA 2” (*)
ARV-2-KA 2”
87
H2OCAD® 3.0
the software for the design
of irrigation systems
H
2OCAD® is an integrated application whose aim is to simplify the
process of designing irrigation systems, both for agriculture (H2OCAD®
3.0 Pro) and turf (3.0 H2OCAD® Light), allowing a significant reduction of
designing times.
H2OCAD® is useful not only to design but also to calculate everything you
need: head losses, evapotranspiration (FAO formula), sizing of electrical
cables, pumps, irrigation areas and much more.
The new version of the software includes a powerful vectorial drawing
engine and a new graphic interface. The
quantity of calculation formulas have been
enlarged to provide the end-user with a
more powerful design tool.
The new H2OCAD® software utilizes a
complete and comprehensive database
(5.000 products, 13.000 varieties of plants,
6.000 climate data. This database is utilized
by the computational algorithms and allows
you to fully comply with the UNI irrigation
requirements).
Features
High degree of automation of the design process: the software is able to simplify several operations, such
as the position of emission devices, drip lines and a quick division in sectors.
Metric: you can obtain automatic metric estimates.
ACCESSORIES
Planimetries: the software can store baseline planimetries and post-site inspection planimetries. Both the
preliminary design and executive designs can also be obtained.
Accuracy of the project: H2OCAD 3.0® contains a powerful engine, which allows you to draw all the project
components: pipes, electrical cables, excavations and accessories.
Input and Output: H2OCAD 3.0® imports and exports both raster and vector files.
Prints: H2OCAD 3.0® can print your project with a very professional layout (logo, title block and legend).
Innovation and completeness make
H2OCAD® 3.0 a unique software designed
to improve the efficiency while designing
an irrigation system.
For more information, contact our Technical Department.
88
89
ACCESSORIES
90
Appendix
91
Laying Aqua-Traxx and Neptune
APPENDIX
Tool for laying Aqua-Traxx and Neptune
on the surface or underground
The above images are indicative only
92
Filtration
How to choose the right modeI
Caution
Before choosing the most suitable filtering system
it is necessary to know some basic parameters:
The filters and filters header in this catalogue
are intended exclusively for the separation of
particles in suspension that accompany the water,
independently of the system used: centrifuge,
sand or disc. Every system chosen guarantees the
retention of small solid particles, thereby avoiding
any obstruction in the irrigation system used.
Origin of the water to be filtered
Maximum flow rate
Backwash flow rate
Maximum and minimum working pressure
Destination of the filtered water
Type of dripper
Electric power availability voltage
It is fundamental to know the level of dirt and
the percentage of solids in suspension contained
in the water to be filtered, for this reason a
physical analysis of the water should be carried
out (see check list below). The concentration
of dirt, evaluated as the percentage of solids
in suspension in p.p.m. (part per million) for
analytical purposes will determine, again after the
judgement of a qualified personnel: both the type
of filter to adopt and the number of filters to use.
Consider that water containing a concentration of
solids in suspension above 400 p.p.m. must stand
for a sufficient period in an artificial lake before
being filtered so decantation can take place.
The filtering system that are shown in the following
in pages are not able to follow any chemical - or
biological - type filtering.
Very frequently, following the addition of fertiliser
to the irrigation water, the precipitation of
loose substances is produced that subsequently
agglomerate and create blockages in the irrigation
system emission channels.
To avoid this problem the most suitable type
of fertiliser should be researched by qualified
personnel in function of to the chemical
characteristics of the water to be filtered.
The use of satellite filters at the water input in the
irrigation sector eliminates the risk of the group’s
being obstructed, caused by the reasons outlined
above and by accidental problems caused by the
recirculation of filtered water at the input of the
irrigation section. The weight and the volume of the
filters and batteries shown in the manual may be
changed without warning.
The flow rates indicated are approximate: for the
choice of all irrigation systems, a safety coefficient
should be added that guarantees their functioning.
ElementResult
Suspended
solid total (S.S.T.)
………mg/l or ppm
Inorganic substances
………%
Organic substances
………%
pH………
E.C.………mmho/cm
Bivalent iron
………mg/l
Trivalente iron
………mg/l
Manganese………mg/l
Calcium carbonates ………mg/l
Bicarbonates………mg/l
Sulphides ………mg/l
Water quality analysis
Take two samples: one sample will have
to be acidified to avoid the precipitation
of any bivalent iron in the solution, while
the second will serve for the remaining
parameters.
Take the samples quickly to the chosen
laboratory and agree other possible
methods of sampling.
Attention: If well water is sampled operate
the pump for a suitable period of time to
bring the sample into line with average
(4 - 10 hours of cleaning out).
APPENDIX
Elements to be analysed for
filtering purposes
93
Filtration
Net filtration area
Example
It indicates the physical
measurement of the particle that will
be filtered. Saying that a net filtration
area is 0,115 mm means that all the
particles that are larger than that are
physically held back by the mesh, the
discs or the sand in the filter.
Suppose we have a wire with a diameter of 0,055 mm, and a
value of the net filtration area of 0,115 mm; that would be the
equivalent of a 150 Mesh net.
This is given by the following formula:
1 inch
= Mesh
(net filtration area required + diameter of the wire)
This concept makes it possible to
eliminate the “wire size” variable
that could lead to errors the moment
reference is made to the mesh
concept.
In the example given above:
25.4 mm
(0.115 mm + 0.55 mm)
= 150 Mesh
Screens with the same Mesh value
25,4 mm = 3 mesh
25,4 mm = 3 mesh
Wire Ø = 1,98 mm
Net filtration area = 6,49 mm
Screen of 58,78% net
filtration area
Wire Ø = 3,96 mm
Net filtration area = 4,51 mm
Screen of 28,44% net
filtration area
Mesh
Micron
about 120-140
120
about 140-150
115
about 180-200
85
APPENDIX
Plastic filters installation
Screen filter
Disc filter
Installing disc filters, the flow direction is opposite to the screen filter
For other information please contact our technical service.
94
Fertigation
efficient, rational use of fertigation, it is vital to
Fsoil orknow
the crop’s nutrient needs (minerals and water),
fertility and the characteristics of the irrigation
Elements to be
analysed in fertigation
water, all factors associated with rational use of the
irrigation technique.
ElementResult
Calcium
Magnesium
Nitrates
Sodium (SARa)
Chlorine
Clorides
Sulphates
Boron
Zinc
The principal needs fertigation can satisfy are:
- Plant health treatments
- Maintenance of irrigation networks and systems
- Modification of water acidity
- Soil disinfection
- Post-harvest treatments
- Improvement of the keeping properties and
disinfection of cut flowers
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
…….. mg/l
Mazzei Injectors
Kynar features (PVDF)
Inlet: When a fluid under pressure
enters the injector it is channeled
towards the injection chamber, and
sharply increases speed.
This acceleration causes a drop
in pressure that allows another
liquid or gas to be sucked through
a special orifice and be mixed with
the drive flow.
Outlet: When the drive flow
advances towards the injector
outlet, its speed reduces, creating
an increase in pressure (at a lower
level than at the injector inlet).
It is more than twice as good as most other plastic
Strength, pressure (15 bar), chemical & temperature
resistance range are greater
Extremely resistant to most AG chemicals:
- Sulphuric acid 90%, good to 100° C (PP, PE, Acetyl are
not recommended)
- Nitric Acid 65%, good to 60° c. (PP, PE resistant up to 6%
at 20° C to 40° C)
- Chlorine (PP not resistant)
- Xylene, good to 40° C (PP, PE, PVC not resistant)
Assembly diagrams
Legend
1
1
Microtube
2
Metering valve (optional)
3
Strainer
2
1
APPENDIX
Operation
« Suction Kit
3
95
Fertigation
Data required for
selecting injectors
Selecting the right modeI
To select the most suitable injector model the following data is
required:
Total water flow rate of the system (1)
……..l/min
Desired fertilizer/chemical product
injection flow rate (2)
…..…l/min
Pressure differential “d” available in the system,
calculated as follows:
- maximum working pressure of system,
at injector inlet (a)
………..bar
- minimum working pressure of system,
at injector outlet (b)
………..bar
- difference between pressures “a” and “b” (c) …………bar
Percentage pressure differential
“d” = (c/a) x 100 …………%
- If “d” is equal or more than 20%, the By Pass installation
method can be used (see diagram 1)
- If “d” is less than 20% then the injectors have to be installed
in series with an auxiliary pump (see diagrams 2 and 3)
Following the example given above, proceed
as follows:
In the Performance tables of pages 81-82,
find the pressure column with “a” = 3.5 bar
Move to the right until “b” = 2,1 bar
Move to the right along the line to the
suction capacity column, continue right until
the nearest value to the desired suction
capacity is found (using the example, 0,8 l/
min). In the top of this column there is the
code of the model to use, in this case AIC484.
Model AIC484 will be capable of sucking
0,8 l/min only if the by-pass is guaranteed a
flow rate of 14,27 l/min as indicated in the
“Injector flow rate”. If, in practice, the injector
does not really exists this flow rate, the
suction capacity will not meet the data given.
Example:
1 = 100 l/min
2 = 0,8 l/min
a = 3,5 bar
b = 2,1 bar
c = 1,4 bar
Therefore “d” = 40%
This means that we can use a by-pass installation, there is no
need for a booster pump.
APPENDIX
Installation diagrams
Diagram 1
Diagram 2
Gauge
Pressure reducing valve
Main flow
Metering Valves
Gauge
Gauge
Injector
Main flow
Main flow
Injector
Injector
Metering
valve
Centrifugal
pump
flow meter
Metering
valve
Metering
valve
flow meter
Fertilizer
flow
96
Diagram 3
flow meter
Fertilizer
flow
Fertilizer
flow
Fertilizer
flow
Fertilizer
flow
Fertigation
Dosatron Water Powered
Proportional Injectors
Operation
Installed directly in the water supply line, the Dosatron operates by
using the flow of water as the power source. The water activates the
Dosatron, which takes up the required percentage of concentrate
directly from the container and injects it into the water.
Inside the Dosatron, the concentrate is mixed with the water, and
the water pressure forces the solution downstream. The dose of
concentrate will be directly proportional to the volume of water
entering the Dosatron, regardless of variations in flow or pressure,
which may occur in the main line.
Motor
piston
Solution
water + %
additive
Clear
water
Features
Dosing
piston
Dosing
adjustment (%)
Concentrated
additive
to be dosed
Dosing Technique: Non-electric proportional
Energy Source: Water flow and pressure
Dosing and treatments can be changed at any time
without changing the programming of the entire
irrigation or control system.
Ease of use and maintenance
Proportional injection
externally adjustable
Integrated functions:
The amount of injected concentrate is
proportional to the amount of water coming into
the Dosatron.
- Metering: volumetric hydraulic motor
Example:
- Injecting: continuous proportional injection of liquid
or soluble concentrate
Adjustment at 1% =
1:100 = 1 volume of
concentrate + 100
volumes of water.
- Regulating: proportionality servo-controlled by the
water flow
APPENDIX
- Mixing: integrated mixing
97
Fertigation
How to choose the right model
Non-return
valve
The choice of the Dosatron essentially depends on the
required irrigation flow.
1st sector:
3000 2 l/h drippers
Example:
A) Calculation of the required irrigation flow
2st sector:
1000 2 l/h drippers
• Minimum irrigation flow:
Multiply the number of drippers (or sprinklers or nozzles)
in the smallest sector by their unit flow:
1 000 x 2 l/h
= 2 000 l/h = 2 m3/h
Manual
valves
• Maximum irrigation flow:
3st sector:
2000 2 l/h drippers
Multiply the total number of drippers in all sectors by
their unit flow:
3 000 + 1 000 + 2 000 = 6 000 x 2 l/h
= 12 000 l/h = 12 m3/h
B) Choice of the Dosatron
Installation
• Its minimum flow:
Its minimum flow capacity must be equal to or less than
the required irrigation flow in the smallest sector.
Example: Sector 2 : 2 m3/h
To optimize your Dosatron, we advise to:
Possibilities:
- Install a filter (300 mesh) upstream,
depending on your water quality
- D3: from 10 l/h to 3,0 m /h
3
- D45: from 100 l/h to 4,5 m3/h
- D8: from 500 l/h to 8 m3/h
- D20: from 1 m3/h to 20 m3/h
- Change the dosing seals at least once a year
- Rinse as often as possible with clear water
- Turn off the water supply and allow the
pressure to drop to zero before adjusting the
injection rate
• Its maximum flow:
Possibilities:
1. For simultaneous fertigation of all sectors:
Maximum required irrigation flow, namely ≥ 12 m /h
3
The required Dosatron is the D20 up to 20 m3/h
APPENDIX
Regulations: Standards and regulations in
force in the country must be respected during
installation and use on the drinking water
network.
2. For fertigation, one sector at a time:
Required irrigation flow in the largest sector, namely
3 000 x 2 l/h = 6 000 l/h, namely ≥ 6 m3/h:
The required Dosatron in the D8 up to 8 m3/h
- Install necessary protections for excess flow,
excess pressure and water hammer (antihammer flow/pressure device).
- It is recommended that you should place an
anti-siphon valve on the downstream side
of the dosing pump in installations in which
there is a risk of siphoning.
- Install your Dosatron on a total by-pass line
Note: it is preferable to choose a Dosatron with a
maximum flow capacity higher than the required
irrigation flow in order to optimize its life.
For all other installation advice, please contact our Technical Service.
98
99
APPENDIX
Promotional Items
Literature
Code
Description
IT- QCATAG-X/16
Toro Ag Catalogue 2016
IT-QOM-E
Owner Manual for Micro Irrigation System
IT-QCORN-X
Corn Drip Irrigation Brochure
IT-QVINE-X
Vineyard Drip Irrigation Brochure
“X” = Language: English (E), French (F), Spanish (S), Russian (R),
IT-QPBXC-X
Leaflet Aqua-Traxx PBX Complete
“X” = Language: English (E), French (F), Spanish (S), German (G), Russian (R)
IT-QNEPC-X
Leaflet Neptune
“X” = Language: English (E), French (F), Spanish (S), Russian (R), Arabic (A)
IT-QNEPPC-X
Leaflet Neptune PC
IT-QDOS-E
Sell sheet Dosatron, English
IT-QMKTP40-X
Sell Sheet Mazzei Injectors
IT-QMKTP46-X
Sell Sheet Mazzei AirJection
IT-QMKTP3-X
Sell Sheet F Filter
IT-QMAKTP52-X
Sell Sheet XD Filter
100
IT-QLDI
Sell sheet Lama Disc filters Introduction
IT-QLDM
Sell sheet Lama Manual discs filters
IT-QLDAS
Sell sheet Lama Automatic discs filters AUTOSENIOR
IT-QLDRO
Sell sheet Lama Automatic discs filters ROTATIVOS
IT-QLRI
Sell sheet Lama Screen filters Introduction
IT-QLRE
Sell sheet Lama Automatic screen filter EKO
IT-QLREL
Sell sheet Lama Automatic screen filter EKO LU
IT-QLRES
Sell sheet Lama Automatic screen filter EKO SENIOR
IT-QLRAM
Sell sheet Lama Automatic screen filter AUTOMESH
IT-QLRM
Sell sheet Lama Manual screen filters
IT-QLRC
Sell sheet Lama Circulating screen filters
IT-QLI
Sell sheet Lama Hydrocyclones
IT-QLSI
Sell sheet Lama Sand filters Introduction
IT-QLSM
Sell sheet Lama Manual sand filters
IT-QLSA
Sell sheet Lama Automatic sand filters
IT-QLVG
Sell sheet Lama Globo Valves
IT-QLVGP
Sell sheet Lama Globo plastic Valves
IT-QLAR
Sell sheet Lama Accessories/Spare Parts
Promotional Items
Merchandising
Code
Description
IT-QSHIRTPBX
IT-QSHIRTNEP
IT-QSHIRTNEPC
IT-QMIAMA2
IT-QMIAMA3
IT-QMIAMA4
IT-QCAPPBX
IT-QCAPNEP
IT-QCAPNPC
IT-QMUACA2
IT-QMUACA3
IT-QAGJACK
IT-QGILAG
IT-QUSBPBX
IT-QMIGRA2
IT-QMKRIG
IT-QMIAPB
IT-QMIACAL
IT-QMIAPE
IT-QMIAMM
IT-QMKMP
IT-QMIGTA2
IT-QCOVNEP
IT-QPOSTITNEP
IT-QNOTEBL
IT-QBLLAV
IT-QMUAST1
IT-QMUAST3
IT-QSHOP-AG
IT-QVFLAG-AG
IT-QAGFOL
IT-QPBXPOS1
IT-QPBXPOS2
IT-QAGPOST-1
IT-QAGPOST
IT-QAGAD-1912
IT-QAGAD-134
IT-QAGAD-92
IT-QPBXAD
IT-QPBXPROD
IT-ADNEP
IT-ADCNEP
IT-QNEPROD
Aqua-Traxx PBX T-Shirt
Neptune T-Shirt
Neptune PC T-Shirt
Toro Ag T-Shirt
Drip In T-Shirt
Toro Ag Polo Shirt
Aqua-Traxx PBX Cap
Neptune Fisherman Cap
Neptune PC Cap
Toro Ag Cap
Drip In Cap
Toro Ag Jacket
Toro Ag Gilet
Aqua-Traxx PBX USB Key (2 GB)
Toro Ag Binder
Plastic Ruler (20 cm)
Toro Ag Note-pad
Toro Ag Calculating Machine
Toro Ag Pen
Toro Ag Metro (2 m)
Toro Ag Mouse Pad
Toro Ag Doormat
Neptune Table cover
Neptune Post-it
Neptune PC Notebook
BlueLine Magnetic black board
Toro Ag flexible PVC Banner
Drip In flexible PVC Banner
Toro Ag cotton bag
Toro Ag Vertical flag
Toro Ag Folder
Aqua-Traxx PBX Poster (50x70cm)
Aqua-Traxx PBX Poster (70x100cm)
Toro Ag Poster (50x70 cm)
Toro Ag Poster (70x100 cm)
Toro Ag Sticker (19x12cm)
Toro Ag Sticker (13x4,4cm)
Toro Ag Sticker (9x2,2cm)
Aqua-Traxx PBX Sticker
Aqua-Traxx PBX Folder with sample
Sticker logo Neptune
Sticker circle Neptune
Neptune Folder with sample
101
Resources
GIANNI BENNA - General Sales Manager EMEA for Agriculture and
Rescom irrigation. Area Manager Spain, Portugal
Mobile: +39 335 6324375
Email: [email protected]
WULF KOLLMEIER – Area Manager Central Europe, Balkans, Finland
Mobile: +39 335 8435160
RENATO PADULAZZI – Area Manager United Kingdom, Netherlands, Switzerland, Malta, Greece, Israel
Mobile: +39 335 7324864
MOHAMMED GHADDAR – Area Manager Middle East, South Africa, Egypt
Mobile: +961 3 387873
FAYCAL CHELIOUT – Area Manager France, Belgium and North Africa
Mobile: +33 (0)680683297
DAVID YEGOYAN – Area Manager West CIS
Mobile: +7 918 1349009 and +7 953 1115417
102
RUSTAM SHADRAIMOV – Area Manager East CIS
Mobile: +7 701 2227338
ROBERT SUTERSKI – Area Manager East Europe, Scandinavia
Mobile: +48 501 583 214
CENTRAL OFFICE
Via dell’Artigianato, 1/3 00065 Fiano Romano (Roma)
Phone: +39 0765 40191
Fax: +39 0765 455386
WAREHOUSE
Località Mola Saracena, 31 - 00060 Capena (Rome) - Italy
TECHNICAL AND COMMERCIAL INFORMATION
Web site: www.toro-ag.it
Phone: +39 0765 40191
103
C ata lo g U E
AgricUlturE
2 0 1 6
C ata lo g U E
IT-QCATAG-E / 16
C a t a l o g U E AgricUlturE 2 0 1 6
AgricUlturE
I.S.E. S.r.l. Via dell’Artigianato, 1-3
00065 Fiano Romano (Roma) • Italy
Tel. +39 0765 40191
Fax +39 0765 455386
www.toro-ag.it
www.youtube.com/ISEontheweb
2 0 1 6

Codification

Transcription

Similar documents