power package - autofunds.com

DY N O - M AT C H E D PA R T S
FOR PROVEN PERFORMANCE
WITH NO GUESSWORK
Edelbrock Total Power Package ® System
PROVEN PERFORMANCE WITH NO GUESSWORK
To get great performance out of any engine, the components must work together. Since the early 1980’s, the Edelbrock
Total Power Package System has solved the parts matching puzzle for many street performance enthusiasts. Intake
manifolds, camshaft kits, cylinder heads and carburetors are the core of the Power Package. Edelbrock is adding even
more choices in components to get even greater performance gains out of an engine. The original “no guesswork” package
now includes more manifolds, more cam kits, and more cylinder heads. Street legal Power
Packages are possible with emission legal square-bore carbs. Our street legal Tubular Exhaust
System headers (TES) or Shorty Headers, mufflers and cat-back systems complete the
Edelbrock Total Power Package in late-model, emission-equipped vehicles.
Edelbrock is an exclusive NASCAR
Performance Partner
PERFORMER ™ PACKAGES
Performer Heads
#60759
Performer Series
Carburetor #1405
STREET LEGAL* POWER FROM IDLE TO 5500
An Edelbrock Performer Power Package is designed to greatly increase performance
and driveability in the low- to mid-rpm range. Performer packages provide
incredible power for passing, towing, climbing grades, daily
driving or traveling across the country in an RV. Your
stock engine will be more efficient, with the potential for
increased mileage and lower exhaust emissions. The
main components of this package include: intake
manifolds, carburetors, camshafts and cylinder heads. For
late-model fuel injected vehicles, Performer intake manifolds
offer performance improvements with emissions equipment
compatibility. Camshafts and cylinder heads are also available
for these vehicles. Performer Multi-Point EFI Systems for GM vehicles
originally equipped with throttle body injected V8s, Tubular Exhaust
System headers, Shorty Headers, Mufflers and Cat-Back Systems are
available to increase performance even further.
Performer
Manifold #2701
Performer-Plus
Cam & Lifters #2102
PERFORMER RPM ™ PACKAGES
Performer RPM
Heads #60259
POWER FROM 1500 TO 6500 RPM
The Performer RPM Power Package has a broad operating range for streetable
performance and high-end horsepower. The dual-plane, 180˚ design of the
Performer RPM intake works with an Edelbrock carburetor for great throttle
response and power up to 6500 rpm. Our RPM Air-Gap manifolds have
a unique air-gap design for a cooler, denser intake charge and
more power. The Performer RPM cam has more lift and duration
than most street cams with acceptable low-end torque while
maintaining 10"-12" Hg @ idle. Performer RPM cylinder
heads are matched to the intake and available bare or
assembled with top-quality valvetrain parts for maximum
bolt-on power. Ideal for high-performance street and weekend
events, Performer RPM packages are for non-emission engines
only. Because of the high rpm (above 5500) capabilities of this
package, a high-volume oil pump, adjustable rocker arms and
high-performance pistons with 9.5:1 compression are recommended.
Thunder Series AVS
Carburetor #1806
Performer RPM
Manifold #7121
Performer RPM Cam and Lifters #7122
*Many Performer Power Package components are street legal. See separate listings for details.
NASCAR makes no claims as to the quality or performance of the products or services offered by any company.
*Many Performer Power Package components are street legal. See separate listings for details.
Edelbrock Total Power Package® Components
ALUMINUM INTAKE MANIFOLDS
Edelbrock is the leading designer and manufacturer of aluminum intakes. Edelbrock manifolds
utilize the features that you need for optimum performance. When you buy an Edelbrock
manifold, whether it’s for the street or the track, you’re getting the best. Edelbrock…
the name that’s been synonymous with quality and performance for over six decades.
Edelbrock manifolds deliver optimum power for your daily driver, street rod, 4x4 or race
car. Performer intakes deliver crisp throttle response from idle to 5500+ rpm… right where
you drive on the street. Performer RPM intakes crank out the horsepower up to 6500+ rpm
while maintaining good throttle response for the street. Performer Air-Gap and RPM Air-Gap
manifolds feature the “air gap” design for the ultimate in street performance. The air gap
runs the entire length of the manifold for a cool, dense mixture and more power.
4-BARREL CARBURETORS
It’s a new look on a proven design! Edelbrock Performer Series® and Thunder Series AVS®
carburetors with EnduraShine Finish deliver legendary Edelbrock reliability and show-winning
good looks. These carbs won’t stain, turn yellow or blue from heat. They match our EnduraShine
manifolds, water pumps and accessories for a complete package. Float levels are factory set and
adjustments are rarely needed. Durable two-piece design has gaskets above the fuel level for a
leak-free design.The Thunder Series AVS carb shares all the performance advantages of the
popular Edelbrock Performer Series with innovative new features. The Qwik-Tune secondary air
valve can be easily adjusted to match your needs. Whether you want the secondaries to “kick in”
early or late, you can set the air valve using standard tools, with no extra springs. Available in
500, 650 and 800 cfm models, in manual or electric choke and 650 cfm for Off-Road
applications. For 4x4 owners, the Thunder Series AVS off-road carbs include spring-loaded
needles and seats for outstanding performance in rough, uneven terrain.
DYNO-MATCHED CAMSHAFT KITS
Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with
Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily
drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque.
Performer RPM cams provide power from 1500 to 6500+ rpm for street high-performance applications.
These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm hp while
maintaining acceptable low-end torque. Performer RPM Hydraulic Roller camshafts
are dyno-matched to Performer RPM Power Packages. Roller tappets reduce
friction, virtually eliminate break-in problems, and permit higher valve
velocities for increased performance.
ALUMINUM CYLINDER HEADS
Edelbrock Performer and Performer RPM aluminum heads for the street increase power
right out-of-the-box. With CNC-matched ports and hand-blended bowls, they provide
superior flow for a broad, powerful torque curve. Features include: extra thick decks,
heli-coiled bolt holes, compatibility with stock rockers, and bronze guides. All Performer
heads are 50-state street legal and Performer RPM heads are for non-emission
engines. Both styles come with high-quality parts and have runners in the stock
position for bolt-on convenience. Our Victor Series heads provide max power for
competition engines. Engineered to greatly increase performance and efficiency,
Edelbrock E-Tec heads fit 302, 327, 350 and 400 c.i.d. S/B Chevys with
“Vortec-style” intake manifolds. They incorporate a high-quench combustion chamber
which promotes a more uniform atomization of the air/fuel mixture for more power. All
Edelbrock heads are built by Edelbrock from start to finish in the USA.
2
POWER PACKAGE
PERFORMER POWER PACKAGES – IDLE TO 5500 RPM
ENGINE FAMILY
INDUCTION
Intake Manifolds
& EFI Systems (G)
Carburetor
or Throttle
Body Size
Cylinder
Heads (G)
2131
3731
600-650 cfm
500-650 cfm
60139
-
5486
500 cfm
-
3785 & 3787
3785 & 3789
2111
3713
2101, 2601, 2701
2116
2104, 2604
3701
3701
3701
3706
3704
3501, 3502
2161
3761
3764
3562, 3563
500 cfm (B)
600-650 cfm (B)
600-650 cfm (B)
600-650 cfm (A,B)
600-650 cfm (A,B)
600-800 cfm
-
60759/60909
60979
60859
60759
60759
60759
60859
60859 (A)
60859
60479
60479
60499
60499
2176
3776
2186
2191
600-650 cfm
600-800 cfm
750-800 cfm
-
2121
3721, 3723
3821
3821
3841
3881
2181
3781, 3783
2171
3771
2105
2166
3766
500-650 cfm
70mm (C)
70mm (C)
600-650 cfm (B)
600-650 cfm
600-800 cfm
650-800 cfm
-
60329, 60359
60329, 60359
60379, 60399
60379, 60399
60379, 60399
60379, 60399
60329, 60379
60329, 60399
-
3711
2151
750-800 cfm
-
2156
600-800 cfm
60579
AMC
How to Use This Guide
As a useful tool for our customers, this Total
Power Package Guide cross references engine
families to component parts. It takes the
guesswork out of choosing the right combination.
• The guide is organized into 2
sections for Performer Packages
and Performer RPM Packages
• After finding the right Power
Package section according to your
RPM range, read down the left
column to find your Engine Family
• Read across to find the part
numbers for your RPM range
and make a list
• Using this list of part numbers,
find each individual listing in our
catalog for product details and
recommendations. This is especially
important on those numbers marked
with a footnote
• Carburetors and Throttle Bodies
are listed by recommended size;
please see our current catalog
for complete descriptions and
part numbers
• This guide is for reference only.
Many important facts can be found
in our main catalog
• Follow these steps and you can be
sure to get the right combination of
parts for proven performance
An Edelbrock Total Power Package offers you
proven performance through careful design,
thorough testing and the information you need
to plan your engine upgrades.
Off-Road and Marine:
Thunder Series AVS carburetors with
spring-loaded needles and seats are
available for off-road applications.
Performer Series carbs and cylinder
heads are available for marine applications.
290-304-343-360-401 V8 1970-91
304-360-401 V8 EGR 1970-91
BUICK
231-252 V6 even-fire 1979-84
CHEVROLET
2.8L V6 longitudinal ’82-85 2V
2.8L V6 longitudinal ’82-85 4V (B)
200, 229, 90° V6 1978-86 (A)
4.3L 90° V6 T.B.I. 1987-95
262-400 V8 1957-86
283-400 V8 w/Vortec or E-Tec ’57-99
305-400 V8 1987-95 non-EGR (A)
262-400 V8 ’73-86 EGR (not H.O. or T.P.I.)
305 V8 EGR LG4 1978-86
305 V8 EGR L69 1978-86
262-400 V8 EGR 1987-95
305, 350 V8 T.B.I. 1987-95
350 V8 T.B.I. 1987-95
396-427-454 V8 1965-90
402-454 V8 EGR 1972-89
454 V8 T.B.I. 1987-95 (Mk IV) (Gen V)
454 V8 T.B.I. 1987-95 (Mk IV) (Gen V)
CHRYSLER
318-340-360 V8 1964-91
318-340-360 V8 EGR 1972-91
361-383-400 V8 1959-79
413-440 V8 1959-79
FORD
289-302 V8 Early Models 1965-95
289-302 V8 EGR except EFI 1973-85
5.0L V8 EFI 1986-93 Mustang GT/LX
5.0L V8 EFI 1994-95 Mustang GT
5.0L V8 EFI 1987-95 trucks
5.8L V8 EFI 1988-95 trucks
351W V8 1969-95
351W V8 EGR except EFI 1973-95
351M-400 V8 1971-82
351M-400 V8 EGR 1973-82
352-360-390-427-428 V8 1958-76
429-460 V8 1968-87
429-460 V8 EGR 1973-87 except EFI
OLDSMOBILE
330-350-403 V8, 1964-85
400-425-455 V8, 1967-76
PONTIAC
350-455 V8 1965-79
Check the part description in each section to determine if the part is legal for sale or use on pollution
controlled motor vehicles.
(A) Certain exclusions apply; read the listing for this part
or call our Tech Line
(B) Not for computer-controlled engines
(C) Throttle body must be used with matching EGR plate
(D) Not for OEM hydraulic roller-lifter equipped engines
(E) Retainers and keepers available for these springs
(for stock heads only)
POWER PACKAGE
VALVETRAIN
ACCESSORIES
Camshaft
& Lifters
Timing
Chains
Gear
Drive
Valve
Springs (E)
non-rotate, rotate
Valve
Spring
Kits
2132
2132
7818
7818
-
5832, 5932
5832, 5932
(F)
(F)
5487
7829
-
-
3790 (B)
3790 (B)
2112 (A)
3714 (A)
2102, 2103
2102, 2103
2102, 2103
2102, 2103
3702
2102, 2103 (B,D)
3702 (A,D)
3702 (A,D)
2162 (A)
-
7331/32, 7800/01
7332, 7801
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7331, 7800, 7802
7334, 7809, 7810
7334, 7809, 7810
7334, 7809, 7810
7334, 7809, 7810
7890
7890
7890
7890
7890
7890
7890
7890
7891
7891
-
2177
2177 (A)
2192 (A)
2192 (A)
7803
7803
7804
7804
2122 (A)
2122 (A)
3722
3722
3782 (A)
2182
2182 (A)
2172
2172 (A)
2106 (A)
2167
2167 (A)
Aluminum
V. Covers
No Name
Chrome
Valve
Covers
Water
Pumps (G)
-
-
4431
4431
-
(F)
-
-
4486 (A)
-
5813, 5913
5814
5802, 5902
5802, 5902
5802, 5902
5802, 5902
5802, 5902
5802, 5902
5802, 5902
5802, 5902
5862
5862
5862
5862
(F)
(F)
(F)
(F)
5894
5894
5894
5894
5894
5894
5894
5894
5895
5895
5895
5895
4252
4248, 4249
4246, 4247
4246, 4247 (A)
4248
4248
4248
4246, 4247 (A)
4246, 4247 (A)
4246, 4247 (A)
4280
4280
4280
4280
4244, 4245
4244
4244
4244
4281
4281
4281
4281
4488
4488
4449, 4649 (A)
4449 (A)
4449 (A)
4449 (A)
4480, 4680
4480, 4680
4480, 4680
4480, 4680
8811
8881
8810, 8811
8810, 8811
8881
8810, 8811
8811
8811
8881
8881
8881
8850, 51/52
8850, 51/52
8851, 8853
8851, 8853
-
5877, 5977
5877, 5977
5892, 5992
5892, 5992
(F)
(F)
(F)
(F)
4295
4295
-
-
4495
4495
4491
4491
8877
8877
8814
8814
7335, 7811/14/20
7335, 7811/14/20
7811, 7814
7811, 7814
7811, 7814
7811, 7814
7335, 7811/14/20
7811/7814
7821
7821
7808
7830
7830
7892
7892
7892
7892
7892
7892
7892
7892
7894
7894
5822, 5922
5822, 5922
5822
5822
5822
5822
5882, 5982
5882, 5982
5872, 5972
5872, 5972
5806, 5906
5867
5867
5896
5896
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
4260
4260
4260
4260
4260
-
4261
4261
4261
4261
-
4460 (A)
4460 (A)
4460 (A)
4460 (A)
4461
4461
4462
4463
4463
8841, 8842
8842
8840
8843
8843
8844
8844
8805 (A)
8866
8866
3712 (A,B)
2152
7813
7813
-
5812
-
(F)
(F)
-
-
4485
4485
-
2157 (A)
7812
7895
5857
(F)
4256
-
4456
-
(F) Retainers and keepers available separately
(G) Manifolds, heads and water pumps also available
with polished finish
Aluminum
V. Covers
w/Name
4
POWER PACKAGE
PERFORMER RPM POWER PACKAGES – 1500 TO 6500 RPM
ENGINE FAMILY
INDUCTION
Intake
Manifolds (G)
Carburetor
or Throttle
Body Size
Cylinder
Heads (G)
7530, 7531
650-800 cfm
60119
7101, 7501
7116, 7516
7118
7161, 7561
7163, 7562
650-800 cfm
650-800 cfm
650-800 cfm
650-800 cfm
650-800 cfm
60719, 60739
60899, 60999
60979, 60989
61989, 61949
60459
60559
7176, 7576
7186
7193
650-800 cfm
750-800 cfm
750-800 cfm
60779
60929
60929
7121, 7521
7123
7181, 7581
7105
7166, 7566
600-800 cfm
70mm (C)
650-800 cfm
650-800 cfm
750-800 cfm
60229, 60259
60399
60229, 60259
60069
60669, 60679
7111
600-800 cfm
60519
7156
600-800 cfm
60579, 60599 (H)
AMC
343-401 V8 1970-91
How to Use This Guide
As a useful tool for our customers, this Total
Power Package Guide cross references engine
families to component parts. It takes the
guesswork out of choosing the right combination.
• The guide is organized into 2
sections for Performer Packages
and Performer RPM Packages
• After finding the right Power
Package section according to your
RPM range, read down the left
column to find your Engine Family
• Read across to find the part
numbers for your RPM range
and make a list
• Using this list of part numbers,
find each individual listing in our
catalog for product details and
recommendations. This is especially
important on those numbers marked
with a footnote
CHEVROLET
283-400 V8 (A) 1957-86
283-400 V8 w/Vortec or E-Tec ’57-99
4.8, 5.3, 5.7, 6.0L 1998-02
396-454 V8 (oval-port) 1965-90
396-454 V8 (rect.-port) 1965-90
CHRYSLER
340-360 V8 1964-91
383-400 V8 1959-79
413-426-440 V8 1959-79
FORD
289-302 V8 1965-95
5.0L 1986-95
351W V8 1969-95
390-428 FE 1958-76
429-460 V8 1968-87
OLDSMOBILE
350-403 V8 1964-85
PONTIAC
350-455 V8 1965-79
• Carburetors and Throttle Bodies
are listed by recommended size;
please see our current catalog
for complete descriptions and
part numbers
• This guide is for reference only.
Many important facts can be found
in our main catalog
• Follow these steps and you can be
sure to get the right combination of
parts for proven performance
An Edelbrock Total Power Package offers you
proven performance through careful design,
thorough testing and the information you need
to plan your engine upgrades.
Off-Road and Marine:
Thunder Series AVS carburetors with
spring-loaded needles and seats are
available for off-road applications.
Performer Series carbs and cylinder
heads are available for marine applications.
Edelbrock Performer RPM Camshaft Kits are designed for street high-performance applications and provide power
from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm
horsepower while maintaining acceptable low-end torque. Performer RPM cams have more lift, duration and have
10 to 12 inches of manifold vacuum at idle. On the next 2 pages, you’ll find horsepower graphs showing the power
levels obtainable when the Performer RPM package is used with the right combination of engine components.
(A) Certain exclusions apply; read the listing for this part
or call our Tech Line
(B) Not for computer-controlled engines
(C) Throttle body must be used with matching EGR plate
(D) Not for OEM hydraulic roller-lifter equipped engines
(E) Retainers and keepers available for these springs
(for stock heads only)
(F) Retainers and keepers available separately
POWER PACKAGE
VALVETRAIN
ACCESSORIES
Camshaft
& Lifters
Timing
Chains
Gear
Drive
Valve
Springs (E)
Valve
Spring
Kits
Aluminum
V. Covers
w/Name
Aluminum
V. Covers
No Name
Chrome
Valve
Covers
Water
Pumps (G)
7132
7818
-
-
-
-
-
4431
-
7102, 2201 (I)
7102, 2201, 2204 (I)
2215 (I), 2216 (I)
7162, 2261 (I)
7162, 2261 (I)
7800, 7331
7800, 7801, 7331
7333
7810, 7334
7810, 7334
7890
7890
7891
7891
5703
5762
5762
5794
5795
5795
4248, 4249
4246, 4247 (D)
4280
4280
4153, 4156
-
4449, 4649
4480, 4680
4480, 4680
8810, 8811
8810, 8811
8850/51/52
8850/51/52
7177
7194
7194
7803
7804
7804
-
5777
5792
5792
(F)
(F)
(F)
4295
-
-
4495
4491
4491
8877
8814
8814
7122, 2221 (I)
7182
7106
7167
7811, 7820, 7335
7811
7811, 7820, 7335
7808
7830
7892
7892
7892
7894
5722
5722
5722
5767
5767
5796
(F)
(F)
(F)
(F)
4260
4260
4260
-
4261
4261
4261
-
4460
4460
4460
4462
4463
8841, 8842
8840
8843
8805
8866
7112
7813
-
5712
(F)
-
-
4485
-
7157
7812
7895
5757
(F)
4256
-
4456
-
AMC
PERFORMER RPM PACKAGE FOR AMC
PERFORMER RPM EFI PACKAGE FOR AMC
CHEVY
500
HP / Torque
450
Torque
400
350
Horsepower
300
383 c.i.d. Chevy V8
250
200
461 ft/lbs
• Performer RPM Intake #7516
• Performer RPM cam #2207
• Performer Series Carb #1812
• Performer RPM heads #60989
• 1-3/4” headers
150
2500 3000 3500 4000 4500 5000 5500 6000
RPM
PERFORMER PACKAGE FOR S/B CHEVY
(G) Manifolds, heads and water pumps also available
with polished finish
(H) Not for 326-350 c.i.d. Pontiacs
(I) Hydraulic roller cam
PERFORMER RPM PACKAGE FOR 383 CHEVY
PERFORMER 2-0 PACKAGE FOR B/B CHEVY
6
POWER PACKAGE GRAPHS
CHRYSLER
PERFORMER 318/360 PACKAGE FOR S/B CHRYSLER
PERFORMER RPM 440 PACKAGE FOR B/B CHRYSLER
PERFORMER RPM 440 EFI PACKAGE FOR B/B CHRYSLER
PERFORMER RPM PACKAGE FOR S/B FORD
WITH HYDRAULIC ROLLER CAM
PERFORMER PACKAGE FOR 5.0L FORD
FORD
PERFORMER RPM POWER PACKAGE FOR S/B FORD
WITH HYDRAULIC LIFTER CAM
Ford FE Performer
RPM Power Package
PERFORMER RPM PACKAGE FOR FE FORD
PERFORMER RPM PACKAGE FOR 460 FORD
All parts on this page not legal for sale or use on pollution
controlled motor vehicles.
POWER
PACKAGE
CHEVY POWER
PACKAGE
KITS
#2094 611HP/573 FT/LBS.
KIT INCLUDES:
Description
Part No.
Performer RPM Hydraulic Roller Cam .....................2262
(2) Victor Jr. 24° Cylinder Heads, complete ..........77479
Timing Cover Gasket and Seal Set..........................6998
Cylinder Head Gasket Set........................................7376
Victor Jr. 454-R intake manifold..............................2902
Intake Manifold Bolt Kit ...........................................8564
Cylinder Head Bolt Set ............................................8554
Power Package
Top End Kit #2094
for big-block Chevys
CHEVY POWER PACKAGE™ TOP END KITS
Our Total Power Package concept is second to none. To make things easier in parts selection, we’ve taken the next step
in providing "no guesswork" by placing the power package components together under a single part number. These kits
include almost everything you need to build your own engine using our performance proven Performer RPM 410 hp or
435 hp E-Tec Power Packages; intake, heads, cam & lifters (except roller lifters), head & intake bolt kits as well as a
complete gasket set. Simply finish the system with the Edelbrock carburetor that best matches your application. See
carb listings in our catalog for application guidelines.
Power Package Top End Kit- 410 hp .....................................................................................................#2098
Power Package Top End Kit- 435 hp w/late model hydraulic roller cam .............................................#2097 (A)
Power Package Top End Kit- 435 hp w/retro-fit hydraulic roller cam pre-'87.....................................#2099 (A)
Power Package Top End Kit- S/B 383, 460 hp ......................................................................................#2096 (A)
Power Package Top End Kit- B/B 502 611 hp w/hydraulic roller cam .................................................#2094 (A)
#2096 460HP/460 FT/LBS.
KIT INCLUDES:
Description
Part No.
Performer RPM Hydraulic Roller Cam
for Late-Model Blocks .............................................2207
(2) E-Tec 200 Cylinder Heads, complete ...............60989
Timing Cover Gasket and Seal Set..........................6997
Cylinder Head Gasket Set for E-Tec Heads .............7367
RPM Air-Gap Vortec intake manifold .......................7516
Intake Manifold Bolt Kit for E-Tec heads.................8516
Cylinder Head Bolt Set ............................................8550
Notes: Performance results obtained on a 350 c.i.d. ZZ4 shortblock with 9.5:1 compression.
#2097 435HP/435 FT/LBS.
KIT INCLUDES:
Part No.
Description
Performer RPM Hydraulic Roller Cam
for Late-Model Blocks ............................................2204
(2) E-Tec 170 Cylinder Heads, complete ..............60979
Timing Cover Gasket and Seal Set.........................6997
Cylinder Head Gasket Set for E-Tec Heads ............7367
RPM Air-Gap Vortec intake manifold ......................7516
Intake Manifold Bolt Kit for E-Tec heads................8516
Cylinder Head Bolt Set ...........................................8550
#2098 410HP/408FT/LBS.
KIT INCLUDES:
Description
Part No.
Performer RPM Hydraulic Cam & Lifters
for early-model blocks............................................7102
(2) Performer RPM Cylinder Heads, complete......60899
Timing Cover Gasket and Seal Set .........................6997
Cylinder Head Gasket Set .......................................7361
RPM Air-Gap intake manifold..................................7501
Intake Manifold Bolt Kit ..........................................8504
Cylinder Head Bolt Set............................................8550
#2099 435HP/435FT/LBS.
KIT INCLUDES:
Description
Part No.
Performer RPM Hydraulic Roller Cam
for early-model blocks...........................................2201
(2) E-Tec 170 Cylinder Heads, complete..............60979
Timing Cover Gasket and Seal Set.........................6997
Cylinder Head Gasket Set for E-Tec heads ............7367
RPM Air-Gap Vortec Intake Manifold......................7516
Intake Manifold Bolt Kit for E-Tec heads ...............8516
Cylinder Head Bolt Set ...........................................8550
All parts on this page not legal for sale or use on pollution cotrolled motor vehicles.
(A) Kits with hydraulic roller cams do not include lifters
8
FORD POWER PACKAGE KITS
Power Package Top End kit #2092
POWER PACKAGE™ TOP END KITS
FOR SMALL-BLOCK FORD
The success of our Power Package Top End Kits for small-block Chevys has paved the path to new kits for 289-302
and 351W small-block Fords. We’ve taken the next step in providing "no guesswork" by placing the power package
components together under a single part number. These kits include almost everything you need to build your own
engine using our performance proven Power Packages; intake, heads, cam & lifters (except roller lifters), head & intake
bolt kits as well as a complete gasket set. Simply finish the system with the Edelbrock carburetor that best matches
your application. See carb listings in our catalog for application guidelines.
Power Package Top End Kit 289-302- 367 hp.......................................................................................#2091
Power Package Top End Kit 351W- 400 hp...........................................................................................#2092
Power Package Top End Kit 351W- 451 hp with hydraulic roller cam .................................................#2093 (A)
#2091 367HP/340 FT/LBS.
KIT INCLUDES:
#2092 400HP/412 FT/LBS.
KIT INCLUDES:
#2093 451HP/433 FT/LBS.
KIT INCLUDES:
Description
Part No.
Performer RPM Hydraulic Cam & Lifters
for early-model blocks............................................2221
(2) Performer RPM Cylinder Heads, complete..............60259
Timing Cover Gasket and Seal Set .........................6991
Cylinder Head Gasket Set .......................................7364
RPM Air-Gap 302 intake manifold...........................7521
Intake Manifold Bolt Kit...........................................8524
Cylinder Head Bolt Set ............................................8552
Performer-Link Timing Set......................................7820
Description
Part No.
Performer RPM Hydraulic Cam & Lifters
for early-model blocks ............................................7182
(2) Performer RPM Cylinder Heads, complete..............60259
Timing Cover Gasket and Seal Set..........................6991
Cylinder Head Gasket Set........................................7364
RPM Air-Gap 351W intake manifold........................7581
Intake Manifold Bolt Kit...........................................8584
Cylinder Head Bolt Set ............................................8553
Performer-Link Timing Set ......................................7820
Description
Part No.
Performer RPM Hydraulic Roller Cam
for early-model blocks ............................................2281
(2) Performer RPM CNC Cylinder Heads, complete......51309
Timing Cover Gasket and Seal Set..........................6991
Cylinder Head Gasket Set........................................7364
RPM Air-Gap 351W intake manifold........................7581
Intake Manifold Bolt Kit...........................................8584
Cylinder Head Bolt Set ............................................8553
Performer-Link Timing Set ......................................7820
All parts on this page not legal for sale or use on pollution
controlled motor vehicles.
(A) Kits with hydraulic roller cams do not include lifters
POWER PACKAGE
EDELBROCK
GASKETS
SEAL IT TIGHT, SEAL IT RIGHT
Edelbrock intake gaskets are matched to Edelbrock Performer and Performer RPM cylinder heads and manifolds for optimum
flow and performance. They feature port openings that are surrounded by a silicone bead for improved sealing. Sold in pairs.
Edelbrock exhaust gaskets are made of high density non-asbestos fiber/metal reinforced composite material that is bonded to a
metal core. This gives them excellent sealing performance, load retention, chemical resistance and structural strength. Sold in pairs.
Edelbrock performance CRC (core-reinforced-composite) valve cover gaskets are fabricated from multi-layer construction
consisting of two highly compressible, high rubber content, fiber-reinforced outside layers, chemically bonded to a high strength
composite core. This unique construction provides excellent sealing integrity and conformability for easy installation as well as
radial strength to resist high-vacuum or blow-out conditions. Sold in pairs.
An Edelbrock cylinder head gasket set includes everything you need to install Edelbrock aluminum heads; intake, exhaust, head,
waterneck, distributor and valve cover gaskets. End seals are not included with intake gaskets, we recommend using RTV silicone.
ENGINE
FAMILY
Small-block Chevy gasket set #7361
CYLINDER
HEAD
GASKET SETS
CYLINDER
HEAD
GASKETS
INTAKE
GASKETS
EXHAUST
GASKETS
VALVE
COVER
GASKETS
Includes everything you need
to install Edelbrock Performer
and Performer RPM heads
For Edelbrock Performer and
Performer RPM heads (1 pair)
Matches Performer and Performer
RPM manifolds and heads
Designed to match
Edelbrock Performer and
Performer RPM heads
Unique construction
provides excellent sealing
integrity & conformability
7372
7329
7213
7239
7532
7369
7346
7246
7247
7546
7361
-
7310
-
7204
7204
7549
7549
7367
7310
7201
72018 Set of (10 pr.)
7201
7235(C)
72358 Set of (10 pr.)
-
-
-
-
7235(C)
-
-
7362
7302
7202
7205
7580
7363
7302
7203
7205
7580
7376
7375
7202
7205
7580
7366(B)
7370
7371
7325
7326
7327
7225(B)
7276
7277
7226
7236
7237
7591
7592
7593
7374
7328
7265
7262
7569
7364
7368
7365
7313
7337
7314
7220
72208 Set of (10 pr.)
7224
7223(D)
7227
7229
7228
7560
7568
7563
7373
7340
7284
7238
7598
7382
7381
7280
7281
7590
AMC
AMC (1967-69 290-390; 1970-91
290-304-343-360-390-401)
BUICK
Buick (400-455 )
CHEVROLET
Chevrolet S/B
(pre-1987, 302-327-350)
Chevrolet S/B (pre-1987, 400)
Chevrolet S/B E-Tec
(pre-1987, 302-327-350)
Chevrolet S/B E-Tec
(pre-1987, 400)
Chevrolet B/B Rectangular Port
(Mark IV, 396-402-427-454)
Chevrolet B/B Oval Port
(Mark IV, 396-402-427-454)
Chevrolet B/B Rectangular Port
(1991 & later Gen V & VI, 454-502)
CHRYSLER
(1958-1979), 361-383-400,
413-426 (except Hemi),
and 440 engines
Chrysler (1966-87) 318-340-360
Chrysler Magnum (1992 & Later)
FORD
Ford (1970-74 351 Cleveland,
1975-85 351 Modified,
1971-81 400 Modified)
Ford S/B (1963-96, 289, 302
(except Boss) & 351W, 1982-96,
5.0L & 5.8L)
Ford FE (1961-76, 390-428)
Ford B/B (1968-1987, 429-460 )
OLDSMOBILE
Oldsmobile (1965-76 400-425-455)
PONTIAC
Pontiac (1961-1976,
326-389-421-428-455)
(A) Does not include end seals, Edelbrock recommends the
use of silicone sealant in place of end seals
(B) Must be used with OE-style valley pan
(C) Does not have embossed silicone bead
(D) Does not fit CJ or SCJ
10
Edelbrock Corporation • Torrance,
California 90503 • USA
Toll free tech line: 1-800-416-8628,
7am-5pm PST, Mon-Fri.
Call 1-800-FUN TEAM for a full-line catalog.
www.edelbrock.com
Brochure #00126
©2007 Edelbrock Corporation Rev. 1/07