DuraLine®, 850XL,

Transcription

DuraLine®, 850XL,

®
DuraLine , 850XL,
888 & 889 Models 2,
and 560DL
Replacement Parts Catalog
COPYRIGHT © 1993, OUTPUT TECHNOLOGY CORPORATION
All rights reserved. This document may not, in whole or in part, be copied, photocopied,
reproduced, translated, reduced to any electronic medium or machine readable form without prior
consent, in writing, from Output Technology Corporation.
TRADEMARKS
DuraLine is a registered trademark of Output Technology Corporation.
Output Technology Corporation
3808 N Sullivan Rd Bldg 3 — Spokane, WA 99216
(509) 536-0468
USA
We suggest you use genuine Output Technology Corporation supplies and authorized service
centers. Contact us at —
Voice: (509) 536-0468 — Fax: (509) 533-1280
For service, please have your printer model and serial numbers handy — these are located on the
back of the printer.
WWW:
http://www.output.com
Part No: 066-00394-01
Rev. G
February 16, 1998
CTS 046-00292-00-V
GENERAL
This catalog contains itemized lists of all servicing aids, supplies, expendables, and field
replaceable parts for all models of the printer. Ordering information is provided for field replaceable
units (FRUs). FRUs are illustrated at the end of these publications.
Parts are listed in the following tables:

Customer Replaceable Units (CRUs) and Miscellaneous, Page 3

Field Service Tools, Page 4

Field Replaceable Units (FRUs), Page 5
FRU illustrated parts breakdown drawings:

Enclosure, Page 9

Base Assembly, Pages 10 and 11

Printer Mechanism, Page 12

Carriage and Ribbon Drive Mechanism, Page 13

Printhead Carriage, Page 14
ORDERING INFORMATION
To order a field replaceable unit (FRU), proceed as follows:
1.
Find the appropriate FRU item number from the illustrations at the end of this publication.
2.
From the FRU table on Page 5, match the FRU item number to the FRU part number.
3.
Obtain the serial number of your printer (on the back of the printer).
DuraLine, 850XL, 888 & 889 Models 2, 560DL Parts Catalog
1
4.
If applicable, have your Visa or MasterCard number and expiration date ready, and then
contact Output Technology Corporation by phone, fax, or mail:
3808 N Sullivan RD Bldg 3
Phone: (509) 536-0468
Fax: (509) 533-1280
Spokane, WA 99216
EXPEDITE FEE POLICY
It is the policy of Output Technology to charge a $50 Expedite Fee for guaranteed same day shipment,
provided stock is available and confirming order is received via fax by 12:00pm, Pacific Time.
For confirming orders received after 12:00pm, Pacific Time, a $50 Expedite Fee will guarantee next day
shipment, provided stock is available.
Please contact your Customer Service Representative if you have any questions.
To order customer replaceable units (CRUs) or other miscellaneous items, select from the
following table and then continue as directed in Step 4 above.
2
CUSTOMER REPLACEABLE UNITS (CRUs) AND MISCELLANEOUS
Part Number
Description
Qty Per
Printer
Spares
Kit1
Customer Replaceable Units (CRUs)
020-00016-00
Cord, Power, International (240 V)
1
020-00125-00
Cable, Parallel Port, Right-Angle
12
088-00001-00
Cord, Power, Domestic (120 V)
1
116-00021-00
Fuse, 3 a., Slow-Blow, 3AG
23
116-00022-00
Fuse, 1.6 a., Time-Delay, Metric
24
116-00102-00
Fuse, 2 a., Standard
15
8XXC100
Ribbon Cartridge, Black (3-Pack)
1
8XXC101
Ribbon Cartridge, Barcode (3-Pack)
1
8XXC102
Ribbon Cartridge, Indelible (3-Pack)
1
K
Training and Publications
N/A6
066-00162-00
Manual, Maintenance & Parts
066-00182-00
Twinax Interface Reference
17
066-00184-00
Coax Interface Reference
17
IMPACTCD100
Guide, Operator's
1
Manual, Parts Catalog
N/A
066-00422-00
Manual, Drawing Set
N/A
066-00036-00
Manual, Technical Information
N/A
K
K
SEE NUMERIC LISTING FOR PRICING
1
2
3
4
5
6
7
K = Supplied in Spares Kit, Suggested 046-00264-XX.
Supplied with DuraLine Standard and Twinax printers.
For use at 100 vac or 120 vac.
For older 560DL, single-voltage (120 vac) printers only.
Includes Replacement Parts Catalog (066-00394-XX) and Drawing Set (066-00422-XX).
Supplied with optional interface.
3
CRUs and Miscellaneous (Continued)
Part Number
Description
Qty Per
Printer
Spares
Kit1
18
K
Shipping
047-00028-01
Ship Kit
FIELD SERVICE TOOLS (Recommended)
z
Screwdrivers
- #1 Straight slot
- #2 Straight slot
- #1 Phillips
- #2 Phillips
z
Hex Allen wrenches
1
/16", 3/32", 7/64", 9/64", 5/32", 3/32"
z
Open end wrenches or sockets
5
/16", 1/4", 7/16", 1/2"
z
1
z
Diagonal cutters
z
Needle nose pliers
z
C-ring and E-ring tools
z
Feeler gauges
z
Metal rule (suitable as depth gauge)
8
4
/4" nutdriver
Original shipping container or its replacement is required for proper shipment of printer.
FIELD REPLACEABLE UNITS (FRUs)
Model
560
DL
Item
Fig.
FRU Part No.
Description
1
1.3
1.5
2
3
4
3a
3a
3a
3a
4
4
001-00020-03
001-00022-01
001-00023-03
001-00027-02
001-00067-00
001-00067-01
Shaft, Main Carriage Support
Shaft, Tractor Drive, ¼”
Shaft, Tractor Support
Platen
Shim, Printhead, .002"
Shim, Printhead, .001"
5
6
7
8
9
3a
3a
1
1
4
002-00011-02
002-00079-02
046-00050-03
046-00163-00
002-00261-03
Bearing, Eccentric Carriage Shaft
Lever, Head Adjust
Cover, Keyboard Overlay10
Cover, Keyboard Overlay11
Bearing, Lower Carriage Shaft
10
11
12
13
14
15
1
4a
4a
4a
4b
4b
020-00001-00
020-00003-01
020-00003-02
020-00003-03
020-00073-01
020-00073-02
Cable, Keypad to Main PCB
Cable, Printhead #1
Cable, Printhead #2
Cable, Printhead #3
Cable, Printhead #1
Cable, Printhead #2
16
17
18
19
20
21
23
24
25
2a
1
2a
1
3a
4b
1
1
1
021-00026-03
021-00032-01
021-00040-01
021-00096-03
021-00139-01
021-00140-00
021-00289-00
021-00284-01
021-00289-00
Transformer, 36v/17v/9v
Access Lid
Transformer, 36v/9v
Enclosure, 850XL, Beige14
Mechanism, Pull Tractor15
Head Carriage16
Access Lid, 560
Enclosure, 560 & DuraLine17
Access Lid, DuraLine
9
10
11
12
13
14
15
16
17
18
888
M2
889
M2
850
XL
Dura
Line
9
All
Spares
Kit1
K
K
12
13
18
Standard, Twinax, and Coax DuraLine except as noted.
Also included with 021-00096-XX, 046-00050-XX, and 046-00202-XX.
Also included with 021-00265-XX, 046-00163-XX, and 046-00301-XX.
Only DuraLine Twinax with an I/O Corporation Twinax Card.
Only Standard DuraLine and DuraLine Coax with an Andrews Laguna Coax Card.
See 046-00872-XX for enclosure without keypad and overlay.
Includes 046-00048-XX, end plates, platen, shafts, tractors, pulleys, belts, carriage, printheads, and control levers.
Includes two printheads. Also includes main carriage shaft bearings, but not lower carriage shaft bearing (002-00261-XX) and
printhead cables.
Not including Coax. See 021-00365-XX for DuraLine Coax.
5
FRUs (Continued)
Model
560
DL
888
M2
889
M2
850
XL
Dura
Line
9
All
Item
Fig.
FRU Part No.
Description
26
27
1
1
021-00291-01
021-00295-01
Enclosure, 888 Model 219
Enclosure, 88920
28.5
1
021-00365-00
Enclosure, DuraLine Coax21
22
29
30
1
1
035-00023-01
035-00026-01
Keyboard, Indicator Panel
Keyboard, Indicator Panel24
23
31
32
33
34
35
3a
2c
2b
1
2
036-00037-00
040-00043-03
040-00044-02
040-00050-00
040-00067-01
Label, Head Gap Lever
PCB, CX
PCB, TX
PCB, Keypad
Jam Sensor Daughter Board
36
37
39
40
41
42
43
44
45
2a
2a
2a
2c
2b
2a
2b
2c
2a
043-00012-09
043-00035-03
043-00076-02
043-00087-03B
043-00121-00A
043-00159-04
043-00160-03
043-00161-03
043-20012-09
EPROM, V1.09A
EPROM, V3.03, Single Track Tach
EPROM, V5.01
EPROM Set, V4.01 CX27
EPROM, V2.31 TX
EPROM, V6.0130
EPROM, 888 M2 & Dura TX, V5.01
EPROM. 889 M2 & Dura CX, V5.01
EPROM, V1.09B, Single Track Tach
46
47
48
2a
3b
3a
046-00008-01
046-00045-00
046-00048-00
Guide, Ribbon (Left, Middle, Right)
Pivot Arm
Frame Assy35
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
6
Spares
Kit1
25
26
K
28
29
31
K
32
33
34
DuraLine Coax only.
Only DuraLine Coax. Includes PCB.
Includes PCB.
Only DuraLine Coax.
Consists of two EPROMs and one EEPROM.
Only DuraLine Coax.
For indicated printer models with dual track tachometers only. For older 850XL printers with single-track tachometers, use
043-00035-XX.
Only Standard DuraLine.
Only DuraLine Coax.
Only 850XL with a single-track tachometer.
Includes base plate of mechanism and 046-00184-XX.
K
K
K
FRUs (Continued)
Model
560
DL
Item
Fig.
FRU Part No.
Description
49
50
51
52
1
4
3a
2a&c
046-00050-03
046-00051-00
046-00058-01
046-00061-01
Keypad
Carriage Bearing Bracket36
Tractor Set, 4 Pin, Pull
PCB, Controller37
53
54
55
56
57
58
59
60
61
62
63
64
65
3a
3a
2b
2a
2a
2a
—
4
1
3a
3a
4a
2a&3a
046-00062-00
046-00068-00
046-00071-05
046-00080-00
046-00081-01
046-00082-00
046-00083-01
046-00118-00
046-00163-00
046-10300-00
046-00184-00
046-00185-00
046-00191-00
66
67
68
70
3a
1
—
3b
046-00201-00
046-00202-00
046-00240-00
046-00280-00
Line Feed Motor39
Mechanism (With Tractors)40
PCB, Controller
NVRAM, 32K42
Fan
RAM, Static, 32K43
Antistatic Brush44
Printhead, 36v, 1.8 ohm
Keypad (Without PCB), 560
Pressure Strip (Without Radius)45
Pressure Strip (With Radius)46
Head Carriage47
Paper Jam Sensor (With
Tractors)48
Tractors (With Jam Sensor)
Keypad
Static Kit50
Carriage Belt51
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
888
M2
889
M2
850
XL
Dura
Line
9
All
Spares
38
K
K
K
K
41
K
K
K
K
49
K
Includes main carriage shaft bearings.
Without EPROMs.
Includes 15-tooth and 20-tooth pulleys. Use 15-tooth pulley for firmware up to but not including V2.00. Use 20-tooth pulley for
current firmware.
Without Line Feed Motor 046-00062-XX.
Optional.
Optional.
Accessory.
Includes five sets of two mylar strips without adhesive.
Includes two mylar strips without adhesive, four plastic clips, and metal backing.
Includes three printheads. Also includes both main carriage shaft bearings, and lower carriage shaft bearing
(002-00261-XX). Does not include printhead cables.
Complete with PCB, sensor, and tractors. Includes 046-00201-XX.
Upgrade kit. Includes right-angle cable connector (020-00125-XX) and grounding hardware.
Includes belt, belt clip, pulley, and pulley shaft.
Kit1
7
FRUs (Continued)
Model
560
DL
888
M2
889
M2
850
XL
Dura
Line
9
All
Item
Fig.
FRU Part No.
Description
71
71.2
71.4
71.5
71.6
1
3b
1
1
1
046-00301-00
046-00851-00
046-00871-00
046-00872-00
046-00873-00
Keypad
Carriage Motor, Dual Track Tach
Enclosure, 889 (no keys)53
Enclosure,850XL,888M2 (no keys)54
Enclosure, Dura Cx (no keys)55
52
71.7
1
046-00874-00
Enclosure, DuraLine (no keys)57
58
72
3a
082-00031-01
Belt, 93T Pull Tractor
73
3a
082-00035-00
Pulley, 36T,Square Line Feed Shaft
74
2a
097-00018-00
Fuse Carrier, Domestic
Spares
Kit1
K
56
K
K
59
K
60
75
2a
097-00023-00
Fuse Carrier, International
76
1
097-00029-00
Switch, Interlock, 1.2561
K
77
3a
097-00041-00
Switch, Paper Out
K
62
78
2a
107-00024-00
EMI Filter
79
2a
110-00029-00
Bridge Rectifier, 35 a.
80
2a
116-00021-00
Fuse, 3 a., Slow-Blow, 3AG63
81
2a
116-00022-00
Fuse, 1.6 a., Time-Delay, Metric
82
—
116-00102-00
Fuse, 2 a., Standard
83
2a
117-00003-00
52
53
54
55
56
57
58
59
60
61
62
63
64
65
8
K
64
65
Power Switch, 4-6 a./250 vac
Same as 021-00255-XX but without keypad and overlay.
Same as 021-00096-XX and 021-00291-XX but without keypad and overlay.
DuraLine Coax only.
Not including DuraLine Coax.
For use with 3-a. fuse at 100 vac or 120 vac.
For use with 1.6-a. fuse at 220 vac or 240 vac.
Canada only.
Includes filter, domestic fuse carriers, and 3.a. fuses.
For use at 100 vac or 120 vac. Only for printers with selectable input voltages. For single-voltage printers, use 116-00102-XX.
For older 560DL, single-voltage (120 vac) printers only.
K
Figure 1. Enclosure
AD0-AE1
9
Figure 2a. Base Assembly (Standard),
Shown for a Printer with Selectable Voltages
10
AD0-AF
Figure 2b. Twinax Option
AD0-AI
Figure 2c. Coax Option
AD0-AJ
11
Figure 3a. Printer Mechanism (Complete)
12
AD0-AG1
Figure 3b. Carriage and Ribbon Drive Mechanism
AD0-AM1
13
14
Figure 4a. Printhead Carriage (Three-Printhead Printer)
AD0-AH1
Figure 4b. Printhead Carriage (Two-Printhead Printer)
AD0-AL1

DuraLine®, 850XL,

Transcription

Similar documents

Uffizi Collection