BURSSECTION 1

Ordering is made easy with our simple-to-use
coding system for each of our brands and we
have individual catalogues available for a more
complete selection of specialty burs.
For all your Bur needs Talk to Us.
SECTION 1
BURS
As an essential part of your daily procedures, your
choice of bur is an important decision. We have
an extensive range of burs from the world’s
leading manufacturers, so no matter what
procedure you need to perform, we have a bur
solution for you.
SECTION 1
CONTENTS
BURS
THE ISO STANDARD
7
DIAMOND BURS
NTI
8-11
MANI
12-13
PREMIER
14-18
CARBIDE BURS
MANI
ELA
19
20-21
STEEL BURS
ELA
21-22
OTHER BUR PRODUCTS
TISSUE TRIMMER
23
CROWN CUT BURS
23
FINISHING STRIPS
23
BUR STANDS
23
CEREC 3D
23
BUR CLEANING BRUSHES
23
LAVA BUR PREPARATION KIT
23
CLEANING STONE
23
BURS
THE ISO STANDARD
A formal International Standards Organisation (ISO) coding system has been established to simplify identification and
ordering of all burs. An example of the ISO coding system is as follows:
C
F
D
B
A
805
A.
The first 3
numbers indicate the
material the cutting
tip is produced from
e.g. diamond,
carbide etc.
E
31
4
B.
C. Indication of
Indication of
type of shank (e.g:
RA 204, FG 314,
etc.
total bur length.
167
D.
Head shape
(e.g: round, inverted
cone etc.)
514
E.
Indication of
grain size (e.g.
coarse – green, fine
– red, etc,)
016
F.
Indication of
maximum head
diameter in 1/10ths
mm.
ISO Bur Shanks
ISO Bur Head Sizes
Maximum shank length
Maximum diameter of cutting tip
ISO: Type:
Length/ømm
009 0.90mm
44.5/2.35
010 1.0mm
104 Straight handpiece (HP)
045
4.5mm
047
4.7mm
050
5.0mm
055
5.5mm
060
6.0mm
065
6.5mm
070
7.0mm
075
7.5mm
080
8.0mm
100
10.0mm
012 1.2mm
202 Right angle mini (RA mini)
16/2.35
204 Right angle (RA)
22.5/2.35
205 Right angle extra long (RA X long)
26.5/2.35
018 1.8mm
206 Right angle surgical (RA surg)
34/2.35
021 2.1mm
313 Friction grip short (FG short)
16.5/1.6
023 2.3mm
014 1.4mm
016 1.6mm
314 Friction grip (FG)
19/1.6
315 Friction grip extra long (FG X long)
21/1.6
316 Friction grip surgical (FG surg)
25.4/1.6
025 2.5mm
027 2.7mm
029 2.9mm
031 3.1mm
033 3.3mm
ISO Diamond Grit Identification
N
= Normal/Medium
107-126 µm
ISO code 524
No colour
SC
= Super Coarse
181 µm
ISO code 544
Black
C
= Coarse
151µm
ISO code 534
Green
F
= Fine
40 µm
ISO code 514
Red
SF
= Super Fine
20 µm
ISO code 504
Yellow
UF
= Ultra Fine
15 µm
ISO code 494
White
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
035 3.5mm
037 3.7mm
042 4.2mm
7
BURS
HOW TO ORDER NTI DIAMOND BURS
NTI®
Diamonds
combine
a
comprehensive selection, strict
adherence to ISO certification
standards and superior Unimatrix®
Bonding Technology. The Unimatrix®
Bonding process minimizes clogging
due to a uniform position of
diamonds, providing more exposed
diamond surfaces on the tips and
edges for superior overall cutting
ability. Sold in packs of 5.
Application and hygiene symbols
NTI Shape No.
ISO Shape No.
The UniMatrix® Diamond Coating Process
All NTI diamond instruments are made in the UniMatrix diamond coating
process. The diamond coating process ensures that the instruments are of
consistently high quality. Here are the advantages:
The NTI diamond instruments are coated with natural diamond grains.
Advantage: sharp-edged shapes, resulting in a better cutting efficiency, the
natural grains break roughly, so that new edges become always available.
The UniMatrix® diamond coating process provides for an even distribution of
the diamonds. The diamonds are clearly defined in their depth of embedding
and show predefined distances between the individual diamond grains. This
gives a smooth cutting result on the tooth surface.
Colour Code:
The Colour Code
indicates the
corresponding
grit size
Application and
hygiene symbols
for rotary dental
instruments:
The diamonds are evenly distributed on the blank. Thus, defined spaces
exist between the diamond grains. The instruments can be easily cleaned
under running water and resist clogging much better.
A
Cavity
preparation
Borsing of
old fillings
Crown
preparation
Filling
process
D
B
E
Since the diamond grains are clearly defined in their depth of embedding,
the grains are in the bonding as deep as necessary and as less as possible.
This means an optimal cutting efficiency during the life time.
Because of a special additive the electroplated bonding between the
diamonds becomes especially smooth. Dental substance cannot clog and
the cleaning effect of the water spray will improve.
Construction:
C
A (1-3) Material of the working part
B (4-6) Shank type and total length
C (7-9) shape of working part
D (10-12) Type, Model
E (13-15) Nominal size of head diameter in 1/10mm
NTI DIAMOND BURS
8
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
NTI DIAMOND BURS
Call your Gunz
representative for
a copy of the NTI
catalogue.
M
SC
C
Without ring
Black ring
Green ring
Medium
107-126 µm ISO 524
Supercoarse 181 µm
ISO 544
Coarse
151 µm
ISO 534
F
SF
UF
Red ring
Yellow ring
White ring
Fine
Superfine
Ultrafine
40 µm
20 µm
15 µm
ISO 514
ISO 504
ISO 494
Due to the extensive size of the NTI range we have pictured only our most popular burs. For the full range, contact us for
the latest NTI catalogue.
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
9
BURS
NTI DIAMOND BURS
M
SC
C
Without ring
Black ring
Green ring
Medium
107-126 µm ISO 524
Supercoarse 181 µm
ISO 544
Coarse
151 µm
ISO 534
F
SF
UF
Red ring
Yellow ring
White ring
Fine
Superfine
Ultrafine
40 µm
20 µm
15 µm
ISO 514
ISO 504
ISO 494
Due to the extensive size of the NTI range we have pictured only our most popular burs. For the full range, contact us for
the latest NTI catalogue.
10
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
NTI DIAMOND BURS
M
SC
C
Without ring
Black ring
Green ring
Medium
107-126 µm ISO 524
Supercoarse 181 µm
ISO 544
Coarse
151 µm
ISO 534
F
SF
UF
Red ring
Yellow ring
White ring
Fine
Superfine
Ultrafine
40 µm
20 µm
15 µm
ISO 514
ISO 504
ISO 494
Due to the extensive size of the NTI range we have pictured only our most popular burs. For the full range, contact us for
the latest NTI catalogue.
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
11
BURS
MANI DIAMOND BURS
ISO
002/012
S
ISO No.
Grit
Order No.
MAN-BC-43
Shape
FEATURES:
• Mani Diamond Burs For Friction Grip
• Packed in blister of 5
• Available in different Grit sizes:
Coarse (C)/125-150µ Standard (S)/106-125µ
Fine (F)/53-63µ Extra Fine (EF)/20-30µ
BC Series
450,000r.p.m.
ISO
173/014
S
MAN-TF-11
ISO
173/016
S
MAN-TF-12
ISO
173/018
S
MAN-TF-13
ISO
171/014
S
ISO
172/023
S
MAN-TF-20
MAN-TF-14
ISO
171/016
S
MAN-TF-21
ISO
170/021
S
MAN-TF-22
300,000r.p.m.
ISO
170/018
S
MAN-TF-23
ISO
170/016
S
MAN-TF-31
160,000r.p.m.
ISO
169/011
S
MAN-TF-41
ISO
170/012
S
MAN-TF-42
TF Series
ISO
170/014
S
ISO
199/016
S
MAN-TF-43
MAN-TR-11
TF Series
TR Series
ISO
199/018
S
ISO
160/016
S
MAN-TR-26
MAN-TC-11
TR Series
TC Series
ISO
111/014
S
MAN-SF-12
ISO
111/016
S
MAN-SF-13
ISO
199/016
S
MAN-TR-12
ISO
160/014
S
MAN-TC-21
ISO
198/018
S
ISO
198/022
S
MAN-TR-14
MAN-TR-13
ISO
160/012
S
ISO
299/012
S
MAN-FO-11
MAN-TC-26
MAN-RS-11
ISO
110/014
S
MAN-SF-21
MAN-BR-31
ISO
298/014
S
MAN-FO-21
MAN-SI-46
SI Series
12
ISO
298/016
S
MAN-FO-22
*
ISO
545/018
S
MAN-RS-21
ISO
197/014
S
MAN-TR-20
ISO
197/016
S
MAN-TR-21
ISO
257/032
S
ISO
257/028
S
MAN-FO-25
MAN-FO-27
ISO
197/018
S
MAN-TR-24
ISO
257/018
S
MAN-FO-32
*
ISO
109/013
S
MAN-SF-31
ISO
109/010
S
MAN-SF-41
*
ISO
544/018
S
ISO
039/032
S
MAN-RS-31
MAN-EX-11
ISO
039/035
S
MAN-EX-12
ISO
199/016
S
MAN-TR-25
ISO
111/012
S
MAN-SF-11
SF Series
ISO
288/012
S
ISO
289/014
S
ISO
141/012
S
MAN-SO-20
MAN-SO-21
MAN-SR-11
ISO
237/018
S
MAN-EX-20
ISO
141/014
S
MAN-SR-12
*
ISO
141/016
S
MAN-SR-13
RS Series
SR Series
ISO
237/021
S
ISO
220/017
S
MAN-EX-21
MAN-EX-24
ISO
237/032
S
MAN-EX-26
ISO
234/014
S
MAN-EX-31
ISO
237/010
S
MAN-EX-41
EX Series
*
ISO
001/016
S
MAN-BR-40
ISO
101/014
S
MAN-BR-41
ISO
001/010
S
ISO
101/012
S
MAN-BR-45
MAN-BR-46
ISO
001/008
S
MAN-BR-49
BR Series
ISO
010/012
S
MAN-TR-19
SO Series
RS Series
ISO
001/018
S
MAN-TR-15
ISO
200/024
S
FO Series
SF Series
*
ISO
553/019
S
ISO
200/022
S
ISO
002/018
S
ISO
002/014
S
MAN-BC-31
MAN-BC-42
ISO
002/012
S
MAN-BC-43
MAN-SI-47
ISO
010/016
S
MAN-SI-48
ISO
068/041
S
ISO
171/014
S
MAN-WR-13
MAN-TF-S20
WR Series
S Series
ISO
171/016
S
MAN-TF-S21
phone: 1800 025 300
MAN-DI-41
ISO
019/014
S
MAN-DI-42
DI Series
BC Series
ISO
010/014
S
ISO
019/010
S
*
ISO
170/021
S
ISO
170/018
S
ISO
170/016
S
ISO
169/011
S
MAN-TF-S22
MAN-TF-S23
MAN-TF-S31
MAN-TF-S41
ISO
198/018
S
MAN-TR-S13
S Series
fax: 1800 025 202
www.gunz.com.au
BURS
MANI DIAMOND BURS
ISO
197/016
S
ISO
160/014
S
*
ISO
288/012
S
ISO
298/014
S
ISO
001/010
S
ISO
001/012
S
ISO
002/012
S
ISO
019/010
S
ISO
010/012
S
*
ISO
010/016
S
MAN-BC-S42 MAN-BC-S43
MAN-DI-S41
MAN-SI-S46
MAN-SI-S48
*
ISO
111/014
C
*
ISO
001/018
C
*
ISO
002/014
S
MAN-TC-S21
MAN-FO-S21
MAN-SO-S20
ISO
197/016
S
ISO
019/010
S
ISO
173/018
C
ISO
198/018
C
ISO
197/018
C
ISO
160/016
C
MAN-TF-SS31 MAN-TR-SS21 MAN-DI-SS41 MAN-TF-13C
MAN-TR-13C
MAN-TR-62C
MAN-TC-11C
MAN-TR-S21
MAN-BR-S45
MAN-BR-S46
S Series
ISO
198/016
S
MAN-SI-47C
ISO
190/018
C
MAN-FO-32C MAN-FO-54C
MAN-SF-12C
MAN-BR-31C
C Series
SS Series
*
ISO
010/014
C
*
ISO
257/018
C
ISO
068/042
C
MAN-WR-13C MAN-TF-12F
C Series
ISO
199/016
F
ISO
198/018
F
ISO
197/016
F
ISO
199/016
F
ISO
199/018
F
ISO
160/016
F
ISO
160/014
F
MAN-TF-21F
MAN-TR-11F
MAN-TR-13F
MAN-TR-21F
MAN-TR-25F
MAN-TR-26F
MAN-TC-11F
MAN-TC-21F
*
ISO
001/006
F
ISO
304/016
F
ISO
304/016
F
ISO
173/016
EF
ISO
171/016
EF
ISO
199/016
EF
ISO
198/018
EF
ISO
171/016
F
ISO
173/016
F
F Series
ISO
298/014
F
MAN-FO-21F
ISO
298/016
F
ISO
150/012
F
ISO
237/021
F
MAN-FO-22F
MAN-EX-18F
MAN-EX-21F
MAN-BR-48F
MAN-WR-31F
MAN-WR-S31F
F Series
MAN-TF-12EF MAN-TF-21EF
MAN-TR-11EF
MAN-TR-13EF
EF Series
ISO
197/016
EF
ISO
199/016
EF
ISO
160/016
EF
ISO
199/018
EF
ISO
160/014
EF
ISO
298/014
EF
ISO
298/016
EF
ISO
237/021
EF
ISO
196/020
F
MAN-TR-21EF MAN-TR-25EF MAN-TR-26EF MAN-TC-11EF MAN-TC-21EF MAN-FO-21EF MAN-FO-22EF MAN-EX-21EF MAN-CR-11F
ISO
196/019
EF
ISO
196/015
F
MAN-CR-11EF MAN-CR-12F
EF Series
ISO
196/014
EF
ISO
197/012
F
MAN-CR-12EF MAN-CR-21F
ISO
248/014
EF
ISO
254/017
F
ISO
289/013
F
MAN-CR-22F
MAN-FO-30F
ISO
243/010
EF
ISO
248/012
EF
ISO
248/012
EF
ISO
001/014
EF
MAN-FO-20EF MAN-FO-40EF MAN-FO-41EF MAN-FO-42EF MAN-BR-40EF MAN-CD-50F
CR Series
ISO
138/007
F
ISO
161/007
F
MAN-CD-52F MAN-CD-53F
ISO
254/009
F
ISO
246/006
F
MAN-CD-51F
CD Series
ISO
246/007
F
MAN-CD-55F MAN-CD-56F
MAN-CD-54F
ISO
138/007
F
ISO
001/016
EF
ISO
247/007
F
MAN-CD-57F
ISO
171/013
F
ISO
108/008
F
MAN-CD-58F
MAN-CD-59F
CD Series
MANI coding system reflects shapes of burs.
TF
TR
TC
FO
SF
SO
Taper Flat End
Taper Round End
Taper Conical End
Flame Ogival End
Straight Flat End
Straight Ogival End
phone: 1800 025 300
SR
RS
EX
BR
BC
Dl
Straight Round End
Rounded Shoulder
Special Shape
BalI Round Type
Ball Collar Type
Double Inverted Cone
fax: 1800 025 202
SI
WR
CR
CD
S
SS
Single Inverted Cone
Wheel Round Edge
CR lnlay Preparation Dia-Burs
Children’s Dentistry Dia-Burs
Short Shank
Super Short Shank
www.gunz.com.au
C
F
EX
Coarse
Fine
Extra Fine
13
BURS
PREMIER DIAMOND BURS
TS2000
™
Speed-Cut Diamonds
Less chair-time for you and your
patient.
TS2000 saves time and money by
simultaneously performing rapid
gross reduction and creating a
finished margin without changing
instruments. Premier’s TS2000
speed-cut diamond is truly two
diamonds in one.
Two Diamonds In One
TS2000 Speed-Cut Diamonds
provide rapid gross reduction
and a finished margin
without changing burs.
Consistent clinical performance.
On average, TS2000 is 50% faster
than other spiral designs – even after
eight preparations1. This unique
coarse diamond is designed to cut
cooler and faster than electroplated
super-coarse diamonds.
The spiral action circulates waterspray more efficiently to reduce heat
energy and accelerate cutting.
Actual Preparation
Close-up occlusal view
of finished margin
A finished margin
is created as shown. You can easily create a
chamfer, bevel, or flat shoulder by selecting
one of the more than forty shapes available.
1) Leading Independent Dental Research Association
Report, May 2002.
Color-Coded Stripes On Shank Indicate Grit
FG Shapes:
Coarse (120µ)
MFS® Finishing Diamonds:
MF1 (45µ)
Fine (60µ)
MF2 (20µ)
Medium (85µ)
MF3 (10µ)
Instrument
Coding
Shape
209 . 10 C
Grit
Abrasive Length
(mm)
Very Fine (45µ)
TS2000
Round-End Taper 2003.7
Coarse
PRE2003.7
Minor/Major Diameter 0.9 / 1.4
Reference #
855T-014
2003.8 2003.9 2003.10 2004.7
PRE2003.8 PRE2003.9 PRE2003.10 PRE2004.7
0.9 / 1.4 0.9 / 1.4 0.9 / 1.4 1.1 / 1.6
856T-014 856LT-014 850T-014 855T-016
2004.8
PRE2004.8
1.1 / 1.6
856T-016
TS2000
Round-End Taper 2004.9 2004.10 2005.7
Coarse
PRE2004.9 PRE2004.10 PRE2005.7
Minor/Major Diameter 1.1 / 1.6 1.1 / 1.6 1.3 / 1.8
Reference #
856LT-016 850T-016 855T-018
TS2000
Curettage (GCP™) 2006.7GC 2006.8GC 2006.9GC 2006.10GC 2007.7GC 2007.8GC 2007.9GC
Coarse
PRE2006.7GC PRE2006.8GC PRE2006.9GC PRE2006.10GCPRE2007.7GC PRE2007.8GC PRE2007.9GC
PRE2008.10GC
Minor/Major Diameter 0.9 / 1.4 0.9 / 1.4 0.9 / 1.4 0.9 / 1.4 1.1 / 1.6 1.1 / 1.6 1.1 / 1.6
Reference #
877KT-014 878KT-014 879KT-014 879KT-014 877KT-016 878KT-016 879KT-016
14
phone: 1800 025 300
2005.8 2005.9 2005.10
PRE2005.8 PRE2005.9 PRE2005.10
1.3 / 1.8 1.3 / 1.8 1.3 / 1.8
856T-018 856LT-018 850T-018
2007.10GC 2008.7GC 2008.8GC 2008.9GC 2008.10GC
PRE2007.10GC PRE2008.7GC PRE2008.8GC PRE2008.9GC
1.1 / 1.6 1.3 / 1.8 1.3 / 1.8 1.3 / 1.8 1.3 / 1.8
879KT-016 877KT-018 878KT-018 879KT-018 879KT-018
fax: 1800 025 202
www.gunz.com.au
BURS
PREMIER DIAMOND BURS
TS2000
Flat-End Taper
Coarse
2000.7
PRE2000.7
Minor/Major Diameter 0.9 / 1.4
Reference #
846T-014
2000.8
PRE2000.8
0.9 / 1.4
847T-014
2000.9 2000.10 2001.7 2001.8
PRE2000.9 PRE2000.10 PRE2001.7 PRE2001.8
0.9 / 1.4 0.9 / 1.4 1.1 / 1.6 1.1 / 1.6
848T-014 848T-014 846T-016 847T-016
TS2000
Bevel-End
Cylinder
Coarse
2016.10
PRE2016.10
Minor/Major Diameter
1.8
Reference #
886T-018
2001.9
PRE2001.9
1.1 / 1.6
848T-016
2001.10
PRE2001.10
1.1 / 1.6
848T-017
2002.7
PRE2002.7
1.3 / 1.8
846T-018
2002.8
PRE2002.8
1.3 / 1.8
847T-018
2002.9
PRE2002.9
1.3 / 1.8
848T-018
2002.10
PRE2002.10
1.3 / 1.8
848T-018
TS2000
TS2000
Flame
Coarse
Football
Coarse
2009.7 2009.8 2009.9 2010.8 2011.8
PRE2009.7 PRE2009.8 PRE2009.9 PRE2010.8 PRE2011.8
Minor/Major Diameter
1.4
1.4
1.4
1.6
1.8
Reference #
30011T-54 862T-014 863T-014 862T-016 862T-018
2014.5
PRE2014.5
Minor/Major Diameter
2.3
Reference #
379T-023
Modified
Shoulder
TS2000
Flat-End Cylinder 2013.7 2013.8 2013.10 KR Cylinder
2013.8KR
Coarse
PRE2013.7 PRE2013.8 PRE2013.10 Coarse
PRE2013.8KR
Minor/Major Diameter
1.5
1.5
1.5
Minor/Major Diameter 1.0/1.6
Reference #
836T-016 837T-016 837LT-016 Reference #
837KRT-016
TS2000
PREMIER DIAMOND FINISHING STRIPS
Compo-Strip® Hand-Held Autoclavable Diamond Finishing Instruments
Compo-Strips® are thin, flexible, one-sided diamond abrasive strips
available in two sizes and three grits: fine, medium and coarse. They have
an uncoated safe centre for easy access through the contact point and are
ideal for finishing Class III, IV and veneer restorations.
Package of Six Assorted Strips
PRE13127
Ì06PRE13127.Î
100T
PRE13107
100F
PRE13111
Compo-Strip® 200T2 For Orthodontic Reproximation
100UF
PRE13115
Simultaneously strip away enamel from adjacent proximal surfaces.
150T
PRE13109
• Flexible, Double-sided with Safe Centre
150F
PRE13113
Compo-Strip Reprox
150UF
PRE13117
(Ortho) (Pkg. of 3 strips)
PRE13180
Ì06PRE13180ÉÎ
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
Grit
T = 60µ
F = 45µ
UF = 20µ
Thickness
(0.15mm)
(0.127mm)
(0.1mm)
15
BURS
PREMIER DIAMOND BURS
16
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
PREMIER DIAMOND BURS
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
17
BURS
PREMIER DIAMOND BURS
PRE14015
Ì06PRE14015wÎ
Package (1) Mini-Squares™
18
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
MANI CARBIDE BURS
ISO
001/021
ISO No.
Order No.
MAN-TC-7
Qty:
Round (Plain)
Shape
FEATURES:
• Excellent cuttings and long life. Sharp flute designs
for fast smooth cutting over a long period of time
• Anti-corrosion resistance
• Strict quality control: All burs are manufactured
under the strictest quality control
• Mani Carbide Burs For Friction Grip
• One-piece construction for minimal breakage risk
• Packed in cassette of 3
Maximum allowable rpm:
200,000r.p.m.
300,000r.p.m.
ISO
001/005
MAN-TC-1/4
ISO
001/006
MAN-TC-1/2
ISO
001/008
MAN-TC-1
*
ISO
001/012
ISO
001/010
MAN-TC-2
MAN-TC-3
*
ISO
001/016
ISO
001/014
MAN-TC-4
MAN-TC-5
150,000r.p.m.
*
ISO
001/018
MAN-TC-6
*
ISO
001/021
MAN-TC-7
ISO
001/023
MAN-TC-8
Round (Plain)
*
ISO
010/006
MAN-TC-33 1/2
*
ISO
010/008
*
ISO
010/010
ISO
010/012
ISO
010/014
ISO
007/009
*
ISO
007/019
*
ISO
007/012
ISO
171/009
MAN-TC-34
MAN-TC-35
MAN-TC-36
MAN-TC-37
MAN-TC-56
MAN-TC-57
MAN-TC-58
MAN-TC-169L
Cylinder Flat End (Plain)
Inverted Cone (Plain)
*
ISO
168/012
MAN-TC-171
*
ISO
168/016
MAN-TC-172
Taper Flat End (Plain)
*
ISO
107/014
MAN-TC-559
*
ISO
237/008
MAN-TC-245
*
ISO
234/011
MAN-TC-246
ISO
232/008
MAN-TC-330
ISO
232/010
MAN-TC-331
Pear (Plain)
*
ISO
107/016
MAN-TC-560
*
ISO
107/009
MAN-TC-556
*
ISO
168/009
MAN-TC-699
ISO
168/012
ISO
168/010
MAN-TC-700
MAN-TC-701
*
ISO
137/014
ISO
137/010
ISO
137/012
ISO
137/014
MAN-TC-1158
MAN-TC-1159
MAN-TC-1557
MAN-TC-1558
MAN-TC-1559
ISO
199/015
MAN-TC-557
ISO
107/012
MAN-TC-558
*
ISO
168/016
ISO
171/012
MAN-TC-701L
MAN-TC-702
*
ISO
168/021
MAN-TC-703
Cylinder Round End (Crosscut)
ISO
ISO
137/009
ISO
137/010
MAN-TC-1156
MAN-TC-1157
Cylinder Round End (Plain)
ISO
137/012
ISO
198/015
ISO
107/010
Cylinder Flat End (Crosscut)
Taper Flat End (Crosscut)
Cylinder Round End (Plain)
MAN-TC-170
Taper Flat End (Plain)
ISO
232/012
MAN-TC-332
ISO
188/010
*
ISO
196/016
MAN-TC-M16DB
*
ISO
168/012
ISO
164/014
MAN-TC-M14CF
MAN-TC-701X
*
ISO
137/010
MAN-TC-M21DC
*
ISO
168/012
MAN-TC-M23DC
Special Shape
ISO
496/009
ISO
496/010
*
ISO
496/012
ISO
237/010
MAN-TC-7901
MAN-TC-7902
MAN-TC-7903
MAN-TC-1931
ISO
137/010
ISO
137/012
*
ISO
194/010
MAN-TC-1958
MAN-TC-1970
277/023
MAN-TC-M15EZ
MAN-TC-M15ZB
MAN-TC-7408
Finishing (Plain)
phone: 1800 025 300
fax: 1800 025 202
MAN-TC-1957
Removal (Crosscut)
www.gunz.com.au
19
BURS
ELA CARBIDE BURS
ROUND + STRAIGHT CUT
ROUND + STRAIGHT CUT CONT’D
ROUND HIGH CUTTING
INVERTED CONE
Due to the extensive size of the ELA
range we have pictured only our
most popular burs. For the full
range, contact us for the latest ELA
catalogue.
20
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
ELA CARBIDE BURS
INVERTED CONE - SHARP EDGED
CYLINDER
PEAR
ELA STEEL BURS
ROUND
ROUND CONT’D
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
21
BURS
ELA STEEL BURS
INVERTED CONE
WHEEL
POINTED FOOTBALL
CONE
Due to the extensive size of the ELA
range we have pictured only our
most popular burs. For the full
range, contact us for the latest ELA
catalogue.
CYLINDER
CROSS CUT FISSURE
22
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au
BURS
OTHER BUR PRODUCTS
Tissue Trimmer
NTI
This flame shaped hard oxide ceramic cylinder is an
alternative and addition to electro surgery and the
scalpel. It is used in the high speed handpiece at full
RPM without water coolant spray, to excise and
contour soft gingival tissue with minimal bleeding.
Bur Stands
PREMIER
Anodized aluminium bur blocks.
NTI-249-016-FG (short)
Ì06NTI-249016FGgÎ
NTI-250-016-FG (long)
18 hole, FG Bur Stand, Green
PRE51021
Ì06NTI-250-016-FG$Î
Ì06PRE51021[Î
8 hole RA, 9 Hole FG Bur Stand, Blue
PRE51025
Ì06PRE51025ÇÎ
LAVA Bur Preparation Kit
NTI
Crown Cut Burs
NTI
Right angled sintered diamond disc for separating
crowns. The diamond grit cuts through gold,
porcelain, non precious metals and even zircon oxide
using one instrument. With continuous cooling it
skims over the surface of the gingiva, reducing the
risk of damaging the gingival margin.
NTI-G5114
Ì06NTI-G5114:Î
Cerec® 3D Prep & Polish Bur Kit
PREMIER
Everything You Need for a Successful LAVA or All
Ceramic preparation: the NTI LAVA bur set offers
clinicians the right rotary instruments that will
offer the best clinical outcome when preparing
teeth to accept a permanent restoration
manufactured from Y-TZP – based or zirconia
restorations.
NTI-SET1676
Ì06NTI-SET1676$Î
Contains seven Two Striper diamonds in an
autoclavable bur block and Luminescence Plus™.
Two Striper diamonds have been specifically
selected to create well defined anatomy and
readable preps complementing the benefits of
CEREC technology.
PRE13550
Ì06PRE13550#Î
For further details on Cerec® see CAD/CAM
Section page 27.
Serrated Diamond Finishing Strips
Cleaning Stone
NTI
NTI
Single sided – safe for approximal teeth. Quality
raw diamonds provide smooth and long-lasting
use. Serrated mid-section to help tackle tight
contact points. Autoclavable, available in 3 grits –
Medium, Fine and Extra Fine. Metal thickness
ranges from 0.13 – 0.08mm.
Medium – 37-44 microns.
NTI-FS3MX
Bur cleaning brush
SAF2190
Ì06SAF2190mÎ
Pack of 10
Bur Cleaning Brush
Pack of 10
Dirty and clogged up diamond instruments can be
easily restored using the dressing stone. Before
use immerse the dressing stone in water until no
bubbles are released, then move the rotating
instrument over the stone for approx. 2-3
seconds. Length 100mm.
Ì06NTI-G9920ÄÎ
Bur cleaning brush
Pack of 10
Ì06NTI-FS3SFXMÎ
phone: 1800 025 300
NTI-G9920
PD
Ì06NTI-FS3FX[Î
Superfine – 0-20 microns.
NTI-FS3SFX
SAFICO
Ì06NTI-FS3MX:Î
Fine – 30-40 microns.
NTI-FS3FX
Bur Cleaning Brush
PDBB1
fax: 1800 025 202
Ì06PDBB12Î
www.gunz.com.au
23
phone: 1800 025 300
fax: 1800 025 202
www.gunz.com.au