SnowSport Utility Plow

Transcription

UTILITY SNOWPLOWS
SnowSport Utility Plow
Complete snow removal
from the comfort of your vehicle
The push frame slides into a front mount
receiver and secures with a hitch pin.
The SnowSport Utility Plow is designed to be hard on snow
but light on your vehicle. Finally allowing light truck and SUV
owners to experience the benefits of owning a plow.
The SnowSport is self-adjusting and does not require controls
in the cab. You won’t have to worry about any electrical or
hydraulic components freezing, malfunctioning or wearing out
and it can be easily transferred from one vehicle to another.
The SnowSport offers versatility for farmers, home owners,
contractors and business owners. The plow works great
on concrete, black top, gravel or grass surfaces and easily
maneuvers over landscaped and uneven terrain.
The blade is made of anodized heavy-duty aluminum with a
tough 1” rubber cutting edge and weighs only 110 pounds.
The low-profile plow is 7’ wide by 18” high and 3” thick and is
strong enough to handle even the most fierce snowstorms.
Fast Attach • Impressive Capacity
The SnowSport is the
easiest and most affordable
snow plow you will ever use.
203
WESTERN® SNOW & ICE CONTROL EQUIPMENT
SNOW PLOWS
For nearly a half century WESTERN® snowplows have blazed a trail
through the worst conditions winter has to offer. All WESTERN® snowplows
feature a baked-on powder finish that's far superior to paint. You'll find that
snow rolls easily along the slick surface of WESTERN® blades coated with
the PRO-GUARD finish. The exclusive Roll-Action blade is designed to roll
snow ahead and to the side instead of just pushing a static load, reducing
wear and tear on both truck and plow.
The patented UniMount System allows for quick one piece removal of the
snowplow whenever your truck is not being used for plowing. The result is
improved vehicle appearance and less permanent weight on the front end
all year long. Once the stand is in position, four pins and two electrical plugs
are all that's needed to attach or remove most of the plow. There's no more
connecting / disconnecting hydraulic hoses or hooking / unhooking the lift
chain with the easy to use system.
IN - CAB CONTROLS
The Solenoid Control is compact and ready for installation virtually anywhere in the cab. An on/off switch with red indicator light helps prevent accidental blade lowering. A handy plug-in connector allows easy removal of the
control when the plow is not in use.
The hand-held CABCOMMAND control puts the operation of all blade functions right in the palm of your hand. It's standard on the MVP snowplow and
available as an option on all other plows.
SPORT/UTILITY PLOW
This 6 1/2' personal use plow was developed specifically for today's downsized vehicles. The blade is 23" high and made of 16 gauge steel.
Designed to maintain structural strength while reducing front axle loading,
the Sport/Utility plow is available for some lighter vehicles that can still carry
a UniMount System style snowplow.
STANDARD PLOW
The WESTERN® Standard snowplow is just that - the standard of the industry. Available in 6 1/2', 7' and 7 1/2' blade widths, this plow line covers a
wide range of vehicles. Made of 11 gauge steel, these 26 1/2" high blades
are proven tough.
The Standard plows give the light commercial and personal use plower the
quality that has become a Western® trademark for over 45 years.
In addition, a 7 1/2' Poly Standard model has been added to this rugged
line. The blade is 27" high and made of 3/8" polyethylene material. This
snowplow provides improved snow rolling action and a maintenance free
plow blade.
204
PRO-PLOWS
Known nationwide as the choice of the professional plower, the
WESTERN® Pro-Plows were designed to meet tough contractor plowing
requirements.
Available in 7 1/2', 8', 8 1/2' and 9' blade widths, the Pro-Plows have heavy
duty components and feature a shock absorber on the back of the blade to
provide a smooth forward trip during spring extension and soften the action
of the blade trip return. This unique feature lengthens the life of your truck
and plow by substantially reducing impact loads. Taller blades to handle
more snow and additional trip springs and vertical ribs on the back of the
blade for extra stiffness and support along with long-wearing cast iron disc
shoes give Pro-Plows the added toughness needed for commercial use.
POLY-PLOW
The WESTERN® Poly Plows were designed to meet the needs of plowers
who want superior snow rolling action. The slippery blade surface created
by the use of thermal formed, high density polyethylene allows you to plow
faster and save fuel. And, the use of non-corrosive poly and powder coated
steel structural members combine to create a maintenance free plow blade.
A rubber snow deflector that keeps snow off the windshield is standard on
all Poly Plows.
Step up to a 7 1/2' or 8' Poly Pro-Plow and you get the additional heavy duty
features of the rugged Pro-Plow, including the shock absorber.
MVP(R) PLOW
The WESTERN® 8 1/2' MVP® snowplow offers
the professional contractor the ultimate in plowing efficiency. You'll do more jobs in less time
with this multi-position V-plow.
As a "V"-BLADE the MVP snowplow is ideal for
breaking through drifts and snowbanks to get
those big jobs started quickly. In the SCOOP
position large amounts of snow can be carried
and stacked where you want it - without spilloff.
This is an ideal position for tight locations were
snow must be collected and not cast off in the
side. When a STRAIGHT or angled blade is
needed for conventional plowing, the 8 1/2'
MVP snowplow adjusts quickly and easily.
Plowing width at full scoop is 7' 3 1/2", at full "V"
is 7' 10 1/2" and fully angled is 7' 6 1/4".Like
other WESTERN® snowplows, the MVP plow
includes the patented UniMount® System.
The feature that separates this snowplow from the rest is the exclusive,
hand-held CABCOMMAND control. The operation of all function-raise, lower
and moving the wings in or out either simultaneously or separately - is in the
palm of your hand.
205
HEAVYWEIGHT PLOWS
The WESTERN® Heavyweights are the right choice for the local streets,
park and country roads and large parking lots. These 9' and 10' plows for
trucks in the 14,000 to 27,000 GVWR range are priced right to fit tight
municipal and contractor budgets.
Both Heavyweights blades are 33" high and made from 7 gauge steel. Two
shock absorbers on the back of the blade provide a smooth forward trip during spring extension and soften the action of the blade trip return. Adjustable
cast iron disc shoes and a 1/2" x 6" AASHO punched high carbon steel cutting edge are standard equipment.
All Heavyweight blade include a set of wheels which can be flipped down to
aid in maneuvering the blade when attaching or dettaching it from vehicle.
ACCESSORIES
Genuine WESTERN® accessories are designed, tested and approved for
use with snowplows. For maximum performance, use only Factory Original
WESTERN® accessories.
1. Blade Guides with Replaceable Flags
2. Commercial Blade Guides - 24" or 36" lengths
3. Economy Blade Guides
4. UniMount® Emergency Parts Kit - MVP® plow version also available.
5. Dolly Wheels - for easy off-truck blade positioning
6. Flex-Arm - flexible in-cab control mount
7. CABCOMMAND - hand-held control
8. Hydraulic Fluid - available in quart & gallon size
9. Pro-Grip - in-cab control mounting kit
10. Paint - red or black, spray or quart can
11. 1/2" Wear Bar
12. Rubber Cutting Edge
13. Poly Snow Deflector
14. Rubber Snow Deflector
Isarmatic® Hydraulic unit lock and Hitch Pin lock available.
Model
Plow
Type
Blade
Width
Blade
Height
Blade
Gauge
Trip
Springs
USU 65
US 65
US 70
US 75
USY 75
UP 75
UPY 75
UP 80
UPY 80
UP 85
UP 90
MVP 85
UHW 90
UHW 10
Sport Utility
Standard
Standard
Standard
Poly Std.
Pro
Poly Pro
Pro
Poly Pro
Pro
Pro
V-Plow
Heavy Wt.
Heavy Wt.
6 1/2'
6 1/2'
7'
7 1/2'
7 1/2'
7 1/2'
7 1/2'
8'
8'
8 1/2'
9'
8 1/2'
9'
10'
23"
26 1/2"
26 1/2"
26 1/2"
27"
28"
29"
28"
29"
28"
28"
28 1/2"
33"
33"
16
11
11
11
3/8" poly
11
3/8" poly
11
3/8" poly
11
11
12
7
7
2
2
2
2
3
3
3
3
3
3
3
4
6
6
Shock Vertical
Absorber Ribs
1
1
1
1
1
1
2
2
4
4
4
4
4
7
7
7
7
7
7
8
6
6
Angling
Rams
1 1/2" x 6"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
1 1/2" x 10"
2" x 10"
2" x 16"
2" x 16"
Plowing Approx. Disc Cutting
Width
Weight Shoes Edge
(full angle) Complete
5' 10"
5' 8"
6' 1"
6' 6"
6' 6"
6' 6"
6' 6"
6' 11"
6' 11"
7' 4"
7' 9"
7' 6 1/4"
8' 2"
9' 1"
425#
560#
575#
590#
614#
695#
730#
710#
745#
730#
750#
880#
1277#
1335#
steel
steel
steel
steel
steel
cast iron
cast iron
cast iron
cast iron
cast iron
cast iron
cast iron
cast iron
cast iron
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
All plows include:
• Low - profile, dual beam halogen headlamps combination park/turn/signal lights that conform to federal safety standards. Vehicle light
switches activates plow lights - no separate in - cab switch is needed.
• Blade guides with replaceable flags for improved operator visibility and blade positioning.
• Snow deflector is standard equipment on Poly Standard, Poly Pro and MVP® plows.
• Cutting edges (many similar brands do not come with edges).
Warranty:
One year parts and labor on all plows. Two year on Poly blades assemblies.
206
5"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
WESTERN SNOW & ICE CONTROL EQUIPMENT
HOPPER SPREADERS
The WESTERN® Hopper Spreaders are ideal for ice control on driveways,
roads and parking lots. These rugged v-box type spreaders mount easily on
pick-up, dump or platform trucks. They can be quickly dismounted and stored
when not in use.
REGULAR CAPACITY MODELS
The 8’ Regular Capacity unit (1.8 cu. yd. capacity) is available in 12 ga. steel
or 16 ga. 304 stainless steel construction with your choice of an 8.5 HP
Briggs & Stratton I/C engine or hydraulic drive system.
HIGH CAPACITY MODELS
High capacity models in 8’ (2.6 cu. yd.) and 10’ (3.3 cu. yd.) lengths also feature 12 ga. steel construction and the choice of either an 8.5 HP B&S I/C
engine or hydraulic drive. All gas engine models feature cab mounted electric
throttle control and electric clutch as standard equipment. All 12 ga. steel
units have a baked-on powder coated finish.
Available options include inverted-vee, heavy duty top screen, extended spinner and drop chute, side extensions, hold down kit, center high-mounted
stoplight kit and a unique vehicle battery kit which eliminates the need for a
dedicated spreader battery.
PRO-FLOTM SPREADERS
The patented WESTERN® PRO-FLO spreader was
designed from the ground up to handle dry #1 rock salt, calcium chloride and other ice melting material. The highstrength polyethylene hopper has 10 cu. ft. capacity. The
hopper’s unique, sloped shape along with replaceable internal agitators promote superior material flow.
Adjustable material deflectors control the spread pattern
while the poly feed gates regulate the material flow independent of the spinner speed and provide positive shut-off.
Other features include 1/3 HP, 12V DC motor with belt
reduction drive for higher torque, bag opener and powder
coated top screen.
207
WESTERN SNOW & ICE CONTROL EQUIPMENT
PRO-FLOTM 2 SPREADERS
Capable of spreading all types of material, including wet sand. The two-stage
design features a 16” belt conveyer to assure positive feed with all types of
materials. The high strength poly hopper has up to 1200 lbs. capacity (10 cu.
ft.) on properly equipped vehicles. Spreader height along with the feed gate
and deflectors are all adjustable. In-cab control options include an “on-off-blast”
rocker switch or solid state, variable speed control.
Other PRO-FLO 2 features include 1/3 HP, 12V DC motor, large 16” spinner to
increase the spread pattern and center high-mounted stop lamp (CHMSL).
Both spreaders offer a choice of two mounting options. Choose an in-bed truss
mount or an under-bed frame mount which includes a Class IV receiver hitch.
MODEL 110 & MODEL 2000
The newest members of the WESTERN® line of tailgate spreaders feature a
low profile design which provides an unobstructed rear view from the cab of the
vehicle. Both the Model 110 and 2000 are ideal for spreading dry #1 rock salt,
calcium chloride and other ice melting materials.
The model 110 fixed mount, economy tailgate spreader comes with an on/off
control, 9” diameter powder coated steel spinner, powder coated steel auger
and agitator, and a 12V, DC motor mounted inside a sealed housing in the hopper for maximum corrosion protection. The low profile, hi-density polyethylene
hopper has 9 cu. ft. capacity (600 lbs.)
The Model 2000 low profile tailgate spreader, with dual SWING AWAY® design,
allows you to swing the spreader out of the way- from either the right or left
side- for quick and easy access to the bed of your pick-up. There’s no need to
remove the tailgate! And this spreader is easily removed without the use of any
tools.
505K
208
FISHER® SNOW & ICE CONTROL EQUIPMENT
209
FISHER® SNOW & ICE CONTROL EQUIPMENT
Plowing and stacking more snow is easy because FISHER® snowplows have
a unique trip-edge design. Only the edge of the blade trips back when an
obstacle is encountered. Because the blade itself remains upright, plowed
snow in front of the blade stays put.
The new STORM-GUARD™ powder coating process, now applied to all
FISHER® snowplows, provides industry-best protection against wear and
rust. Automated, climate controlled powder booths provide uniform coverage
to all surfaces.
ACCESSORIES
Genuine FISHER® accessories are designed, tested and approved for use with snowplows.
For maximum performance, use only Factory Original FISHER® accessories.
Part Number
Description
5242
5492Y
20650
22215
22216
27100
26812
A4419
9400
Fisher yellow paint - 12 oz. spray
Fisher yellow paint - 1 quart can
Fisher hydraulic fluid
Poly Cutting Edge
6.9 LD
Poly Cutting Edge
7.5 LD
Snow Foil - All HD and RD Plows
Fisher “Plow Parka”
Fisher OE style lever control
Fisher “Fish-Stik” hand held control
Model
Plow
Type
Blade
Width
Blade Blade
Trip
Height Guage Springs
Ribs
210
Angling
Rams
Plowing
Width
Approx
Weight
(Full Angle)
Complete
Disc
Shoes
Cutting
Edge
SNOW AND ICE CONTROL
PLOW CUTTING EDGES
PLOW CUTTING EDGE IDENTIFICATION
FISHER CUTTING EDGES
LENGTH OEM PART #
6.5’
7’
7.5’
8’
5094 (polymer)
5485 (polymer)
5532
5532, 5/8x6
5532, 5/8x8
5533
5533, 5/8x6
5533, 1/2x8
5533, 5/8x8
USE PART # DIMENSIONS
B5530 (steel)
B5531 (steel)
B1301300
B5532-5/8
B5532-8-5/8
B1301305
B5533-5/8
B5533-8
B5533-8-5/8
1/2”x6”x78”
1/2”x6”x84”
1/2”x6”x90”
5/8”x6”x90”
5/8”x8”x90”
1/2”x6”x96”
5/8”x6”x96”
1/2”x8”x96”
5/8”x8”x96”
FIRST
SECOND
# OF
HOLE
HOLE
HOLES
1”
1 7/16”
1 7/16”
1 7/16”
4 15/32”
4 15/32”
4 15/32”
4 15/32”
12
12
12
12
12
12
12
3”
7/16”
7/16”
7/16”
7/16”
7/16”
7/16”
7/16”
11
8
8
8
8
8
8
8
STANDARD HIGHWAY PUNCH (SHP)- DPW, municipal, Fisher, & Meyer, etc..
8’ and up ( not Western)
8’
9’
10’
11’
5533,
5533,
5534
5534,
5534,
3507,
3507,
——
5/8x6
5/8x8
5/8x6
5/8x8
5/8x6
5/8x8
5533-5/8-SHP
5533-8-5/8SHP
1301310
B5534-5/8
B5534-8-5/8
B5535-5/8
B5536-8-5/8
B5536-8-5/8
5/8”x6”x96”
5/8”x8”x96”
1/2”x6”x108”
5/8”x6”x108”
5/8”x8”x108”
5/8”x6”x120”
5/8”x8”x120”
5/8”x8”x132”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
10
10
11
11
11
12
12
13
1/2”x6”x72”
1/2”x6”x78”
1/2”x6”x78”
1/2”x6”x84”
1/2”x6”x90”
1/2”x6”x96”
1/2”x6”x102”
5/8”x8”x102”
4 7/8”
1 1/2”
2 11/16”
4 11/16”
10 3/8”
15”
10 3/8”
12 7/16”
use 1301300
use 1301305
12 7/16”
7
6
8
7
MEYER CUTTING EDGES
6’
6.5’
7’
7.5’
8’
8.5’
09130
09100
09131
09132
09796HD
09133
09134
09134, 5/8x8
1301010
1301005
1301015
1301020
1301025
1301035
1301040
B09134-8-5/8
1 1/4”
9
WESTERN CUTTING EDGES
6’
6.5’
7’
7.5’
8’
8.5’
9’
10’
6.5’
7’
7.5’
58811 (centerpunch)
58812 (centerpunch)
58813 (centerpunch)
58814 (centerpunch)
58815 (centerpunch)
58816 (centerpunch)
58817/49251
58818 (top punch)
49066/49068
49070
49076/49088
8’
8.5’
49080/49089
49086
NLA
NLA
NLA
1301265
1301265
1301270
1301240
1301280
1301200
1301210
1301215
3/8”x6”x72” (old style)
1/2”x6”x108”
1/2”x6”x120”
1/2”x6”x78”
1/2”x6”x84”
1/2”x6”x90”
1301230
1301225
no availability
use 1301200 (top punch)
use 1301210 (top punch)
2 5/8”
14 1/4”
8
2 1/2”
13”
8
2 1/2”
16”
8
use 1301240
special order only
2 5/8”
8 1/4”
8
2 5/8”
11 1/4”
8
14 1/2”
2 5/8”
8
1/2”x6”x96”
1/2”x6”x102”
2 1/2”
2 1/2”
13”
16”
8
8
1/2”x6”x18”
1/2”x6”x45”
1/2”x6”x51”
5/8”x6”x90”
5/8”x6”x96”
3”
3”
3”
3”
3”
6”
6”
12”
12”
12”
3
8
7
8
9
5/8”X6”X102”
5/8”X6”X108”
3”
3”
12”
6”
10
11
DIAMOND CUTTING EDGES
18”
45”
51”
7.5’
8’
811000233
801100019
801100020
——
——
1301100
1301105
1301110
B5532D-5/8
B5533D-5/8
8.5’
9’
801100102
——
B801-102-5/8
B5534D-5/8
CUTTING EDGE HARDWARE- for use on all of above edges
5551/2
5572/3
1301350
1301355
211
9 pcs.- 1/2”x2” n, b, &w
12 pcs.- 5/8”x2” n, b, &w
S.A.M.® SNOW PLOW REPLACEMENT PARTS
REPLACEMENT PARTS FOR MEYER® SNOW PLOWS
CUTTING EDGES - HIGH CARBON STEEL
LOC.
PART NO.
1
1
1
1
1
1
1
1
1
1
1301005
1301010
1301015
1301020
1301025
1301030
1301035
1301040
1301045
1301050
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Two Meter 78”
ST-72 72”
ST-78 78”
ST-84 84”
ST-90 90”
ST-90 90” Heavy Duty (1/2”)
C-8 96”
C-8.5 102”
M-9 108”
M-10 120”
09100
09130
09131
09132
09796
09796HD
09133
09134
07259
07235
CUTTING EDGE BOLTS AND NUTS
LOC.
PART NO.
2
2
2
1301055
1301060
1301065
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Set of 6 (Two Meter)
Set of 9 (ST78/C-8.5)
Set of 12 (M-9/M-10)
08486
08184
08318
BULK - CUTTING EDGE BOLTS AND NUTS
LOC.
PART NO.
2
2
2
2
FCB050013200
FNE050013053
FNE063011069
FNE063011069
LOC.- Location on Drawing
N.I.- Not illustrated
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
1/2”-13 X 2” Grade 5, Zinc Carriage Bolt
1/2”-13, Zinc, Nylon Lock Nut
5/8”-11 x 2-1/2”, Grade 5, Zinc Carriage Bolt
5/8”-11, Zinc, Nylon Lock Nut
212
Many new plow parts & accessories now available - call
SNOW PLOW HARDWARE
LOC.
3
4
4
5
5
7
7A
7B
8
9
PART NO.
1302005
1302010
1302015
1302020
1302025
1302030
1302035
1302040
1302045
1302050
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
Eyebolt w/Nuts
Trip Spring
Trip Spring (Compact Blade)
King Bolt Assy. 5/8”
King Bolt Assy. 3/4”
(2) Pivot Pin w/Cotter
(2) Pivot Pin Tube
(2) Washer - For Tube
(2) 5/8” Hinge Pins w/Linch Pins
(2) Lynch Pins
09124
07017
12978
09122
09125
08541
12149
07141
08562
08543
SHOES AND PARTS
LOC.
10
11
N.I.
N.I.
N.I.
12
12
13
PART NO.
1303005
1303010
1303015
1303020
1303025
1303030
1303031
1303035
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
Shoe Assy. ST-78/C-8.5
Shoe Assy. M-9/M-10
Runner Only ST-78/C-8.5
Runner Only M-9/M-10
Spindle Only ST-78/M-10
7/16” Linch Pin (Fits BPC Spindle)
1/4” Linch Pin (Fits OEM Spindle)
Washer
09126
09592
07006
07086
12057
20420
22083
20363
BLADE GUIDES
LOC.
14
15
PART NO.
1308005
1308010
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
Marker Kit (B2020)
Replacement Tips (100 pcs.)
09916
N/A.
POWER ANGLING & LIFT CYLINDERS
LOC.
16
16
16
N.I.
PART NO.
1304005
1304010
1304015
1304020
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
1-1/2” x 10”
1-1/2” x 12”
2” x 12”
1-1/2” x 6” LIFT
05810
05437
05752
05984
TRUCK-LITE HEADLAMP KIT
LOC.
N.I.
N.I.
PART NO.
1311005
1311006
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
Headlamp Kit w/Harness
Headlamp Switch
07969
07955
PAINT
LOC.
N.I.
PART NO.
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
1310005
1 Qt. Yellow Paint
07181
SEAL KITS AND PACKING NUTS FOR MONARCH CYLINDERS
LOC.
N.I.
N.I.
N.I.
N.I.
PART NO.
1305100
1305105
1305110
1305115
DESCRIPTION
Seal Kit 1-1/2” RAM
Seal Kit 2” RAM
Packing Nut 1-1/2” RAM
Packing Nut 2” RAM
REPLACES O.E.M.
PART NUMBER
07705
07799
07805
07806
213
HOSES AND FITTINGS
LOC.
17
17
N.I.
N.I.
N.I.
17
17
17
18
18
19
19
PART NO.
1304030
1304031
1304245
1304240
1304033
1304035
1304040
1304050
1304055
1304056
1304025
1304026
DESCRIPTION
45” Hose w/Swivel (Indiv. Bagged)
45” Hose w/Swivel (Bulk-100/Box)
Rigid Elbow - Tall (E60)
Rigid Elbow - Short (E60)
1/4” x 45” MPR x FPR Hose (E60)
65” Hose w/Swivel
70” Hose w/2 Swivels
70” Hose w/Swivel
Swivel Ell 90 0 (Indiv. Bagged)
Swivel Ell 90 o (Bulk -100/Box)
Quick Coupler (Indiv. Bagged)
Quick Coupler (Bulk - 100/Box)
REPLACES O.E.M.
PART NUMBER
21856
21856
21857
22141
22144
21866
21867
21868
21855
21855
15072
15072
PARTS
LOC.
20
N.I.
21
22
23
N.I.
N.I.
N.I.
24
25
26
27
28
29
30
31
32
33
34
N.I.
N.I.
N.I.
N.I.
39
40
41
PART NO.
1306005
1306010
1306015
1306016
1306020
1306025
1306030
1306035
1306040
1306045
1306050
1306055
1306060
1306065
1306070
1306075
1306080
1306085
1306090
1306095
1306100
1306105
1306110
1306115
1306120
1306125
DESCRIPTION
Bosch Type Motor
Motor, Fenner Type
“A” Solenoid (Coil & Valve) 3/8” Stem
“A” Coil
“A” Valve
“A” Coil New Style (5/8” Hole)
“A” Valve New Style (5/8” Stem)
“A” Solenoid New Style (5/8”)
“B” Solenoid (Coil & Valve)
“B” Coil
“B” Valve
“C” Solenoid (Coil & Valve)
“C” Coil
“C” Valve
Motor Solenoid
Angle Switch (E-47)
Lift Switch (E-47)
(10 pc.) Yellow Handle
(10 pc.) Black Handle
Battery Connector
Pres. Relief Valve w/Bush
Crossover Valve Kit
Power Cable 36” (Red)
Cable and Plug Assy.
Power Cable 63” (Red)
Ground Cable 42” (Black)
REPLACES O.E.M.
PART NUMBER
15054
15727
15356
15392
15393
15659
15660
15661
15357
15382
15380
15358
15430
15381
15370
21918
21919
15375
15376
21976
08473
15606
05024
15670
15671
15672
LOW TEMP BLUE HYDRAULIC FLUID
LOC.
N.I.
N.I.
N.I.
N.I.
PART NO.
1307005
1307010
1307015
1307020
DESCRIPTION
1 Qt. Bottle w/Spout
1 Case (12 Qts.)
5 Gallon Pail w/Spout
55 Gallon Drum
REPLACES O.E.M.
PART NUMBER
15134
15487
N/A
15614
SNOW DEFLECTOR
LOC.
37
38
N.I.
N.I.
PART NO.
1309005
1309010
1309015
1309020
DESCRIPTION
Deflector ST-78/90
Replacement Rubber 9” x 90”
Deflector C-8.5/M-9/M-10
Replacement Rubber 9” x 120”
REPLACES O.E.M.
PART NUMBER
12896-7
12900
12898
12901
214
HYDRAULIC PARTS FOR MEYER® HYDRAULIC
UNIT E-47
LOC.
*Contains Cap, Brushes,
Springs, Bushing, Brush
Holder and Screws; comes
assembled.
1
2
3
4
N.I.
N.I.
N.I.
5†
6
7
8
9†
10
11
12
13†
14†
15†
24
00
000
16
17
18
19
20
21
22
23
PART NO.
1306005
1306015
1306016
1306020
1306035
1306025
1306030
1306130
1306055
1306060
1306065
1306135
1306040
1306045
1306050
1306140
1306145
1306150
1306153
1306155
1306160
1306165
1306170
1306175
1306180
1306100
1306105
1306185
DESCRIPTION
3” Motor 12 V DC
“A” Solenoid Valve Assembly 3/8” Stem
“A” Coil
“A” Valve
“A” Solenoid New Style 5/8” Stem
“A” Coil New Style 5/8” Hole
“A” Valve New Style 5/8” Stem
“A” Seal Kit
“C” Solenoid Valve Assembly
“C” Coil
“C” Valve
“C” Seal Kit
“B” Solenoid Valve Assembly
“B” Coil
“B” Valve
“B” Seal Kit
Crossover Seal Kit
Seal ,Kit
Strainer
Master Seal Kit (includes kits
denoted by †)
Cap and Brush Kit*
Gasket
Drive End Cap and Bushing
Cup Packing
1-1/8” I.D. O-Ring
Pressure Relief Valve w/Bush
Crossover Valve Kit
Pump Shaft Seal
REPLACES O.E.M.
PART NUMBER
15054
15356
15392
15393
15661
15659
15660
15431
15358
15430
15381
15433
15357
15382
15380
15432
15610
15254
15326
15456
5103
551G
5001
15162
15198
08473
15606
15581
215
HYDRAULIC PARTS FOR MEYER® HYDRAULIC
UNIT E-60
LOC.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
N.I.
N.I.
PART NO.
1306195
1306200
1306182
1306180
1306184
1306190
1306175
1306176
1306040
1306055
1306035
1306045
1306060
1306025
1306205
1306210
1306212
1306050
1306065
1306030
1306183
1306010
1306215
1306220
1306225
DESCRIPTION
O-Ring
Seal, Shaft
O-Ring 1-1/2” I.D.
O-Ring 1-1/8” I.D.
O-Ring 3-1/2” I.D.
Washer, Nylite 5/16”
Packing Cup
Packing Cup
“B” Solenoid Assembly
“C” Solenoid Assembly
“A” Solenoid Assembly
“B” Coil Red Wire
“C” Coil Green Wire
“A” Coil Black Wire
Wiper
Sleeve E60
Sleeve E60H
“B” Valve Cartridge
“C” Valve Cartridge
“A” Valve Cartridge
O-Ring 1-15/16” I.D.
Motor, Fenner Type
Crossover Repair Kit
Basic Seal Kit
Master Seal Kit
216
REPLACES O.E.M.
PART NUMBER
15687
15686
15693
15198
15131
21929
15162
15691
15697
15358
15661
15382
15430
15659
05119
15737
15199
15698
15381
15660
15163
15727
15606
15707
15705
REPLACEMENT PARTS FOR WESTERN® PLOWS
CUTTING EDGES
*Center Punched,
Reversible Edges
(Old Style)
LOC.
PART NO.
DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1301200
1301205
1301210
1301215
1301220
1301225
1301230
1301235
1301240
*1301245
*1301250
*1301255
*1301260
*1301265
*1301270
1301275
1301280
6-1/2’ Std. 3/8” x 6”
6-1/2’ Compact 3/8” x 6”
7’ Long 3/8” x 6”
7-1/2’ Long 3/8” x 6”
8’ Long 3/8” x 6”
8-1/2’ Long 1/2” x 6”
7-1/2’ x 1/2” (For Pro Plow)
8’ x 1/2” (For Pro Plow)
9’ Long 1/2” x 6” (For Pro Plow)
6’ Long 3/8” x 6”
6-1/2’ Long 3/8” x 6”
7’ Long 3/8” x 6”
7-1/2’ Long 3/8” x 6”
8’ Long 1/2” x 6”
8-1/2’ Long 1/2” x 6”
9’ Long 1/2” x 6”
10’ Long 1/2” x 6”
LOC.
PART NO.
DESCRIPTION
2
3
4
5
6
7
7
1302200
1302205
1302210
1302215
1302220
1302225
1302230
HARDWARE
Eyebolt w/Nuts
Trip Spring
Cap Screw 3/4” x 1-7/8
Slotted Hex Nut
Rivet 3/4” x 4”
Rivet 3/4” x 3-1/2”
Rivet 1” x 4”
REPLACES O.E.M.
PART NUMBER
49066
49068
49070
49076
49080
49086
49088
49089
49251
58811
58812
58813
58814
58815
58816
58817
58818
REPLACES O.E.M.
PART NUMBER
90493
23039
90165
91472
93061
93063
93077
217
REPLACEMENT PARTS FOR WESTERN® PLOWS,
HARDWARE,
Continued
continued
LOC.
8
6
8
9
10
11
N.I.
PART NO.
1302235
1302240
1302245
1302250
1302255
1302260
1302265
DESCRIPTION
Rivet 1” x 3-1/2”
Rivet 1” x 5”
Hitch Pin
Cotter Pin 5/32” x 1-1/2”
Hairpin Cotter
Groove Pin 3/16” x 1-1/4”
#10-24 x 3/8 Set Screw
REPLACES O.E.M.
PART NUMBER
93079
93080
93028
91911
91965
92004
90600
SHOE ASSEMBLY AND PARTS
LOC.
PART NO.
12
13
14
15
29
1303200
1303205
1303210
1303215
1303220
LOC.
PART NO.
DESCRIPTION
Std. Shoe Assembly
Shoe Washer 1/8” Thick
Shoe Spacer 1-1/2” Long
Linch Pin
H.D. Shoe Assembly
REPLACES O.E.M.
PART NUMBER
49067
91109
60045
93010
49071
BLADE GUIDES
16
00
17
16A
00
16B
1308200
1308010
1308210
1308215
DESCRIPTION
Blade Guide Assembly
(Replaces 62265)
Replacement Tips (100 pcs.)
(2) Blade Guide Assembly
w/Flags and Hardware
Flag w/S Hook Only
REPLACES O.E.M.
PART NUMBER
2040
0
N/A
59700
59694
PAINT
LOC.
N.I.
PART NO.
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
1310200
1Qt. Red Paint
49135
POWER ANGLING AND LIFT CYLINDERS
LOC.
18
18
N.I.
N.I.
18
PART NO.
1304200
1304205
1304210
1304215
1304220
DESCRIPTION
1-1/2” X 10” Old Style (1” P.H.)
1-1/2” X 10” New Style (3/4” P.H.)
1-1/2” X 6” Lift
2” X 6” Lift
2” X 16” H.D.
REPLACES O.E.M.
PART NUMBER
25209
56102
25200
25210
25878
HOSES AND FITTINGS
LOC.
PART NO.
19
20
21
22
21
22
23
0
1304225
1304230
1304235
1304240
1304245
1304250
1304255
DESCRIPTION
1/4” x 38” H.P. (Indiv. Bagged)
1/4” Hex Nipple
1/4” x 90o Street Elbow
1/4” x 90o Male Elbow
1/4” x 90o Male Elbow (Special)
1/4” x 90o Strret Elbow (Special)
1/4” Hydraulic Coupler
(Individually Bagged)
REPLACES O.E.M.
PART NUMBER
55020
25519
92210
92278
92275
92208
25232
218
REPLACEMENT PARTS FOR WESTERN® PLOWS,
Continued
SEAL KITS AND FITTINGS FOR MONARCH CYLINDERS
LOC.
PART NO.
N.I.
N.I.
N.I.
N.I.
1305200
1305205
1305210
1305215
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Packing
Packing
Packing
Packing
Set 1-1/2”
Set 2”
Nut 1-1/2”
Nut 2”
25205
25215
25944
25948
SOLENOIDS, MOTORS, BATTERY CABLES AND CABLE CONTROLS
LOC.
PART NO.
24
25
25A
25B
27
28
32
30
31
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
1306300
1306305
1306310
1306315
1313005
1313010
1313015
1306320
1306325
1306375
1306330
1306335
1306340
1306345
1306350
1306355
1306360
1306365
1306370
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Motor Solenoid
Extra Duty Solenoid
Relay-Cable Hyd. System
Relay-Solenoid Hyd. System
Control Cable (Old Style)
Control Cable (New Style)
Adjustment Control Cable
Replacement for 4” Old Style Motor
Replacement for 4-1/2” New Style Motor
Replacement Motor Gasket
Battery Cable 60” (Red)
Cartridge 20 w/Nut
Cartridge 30 w/Nut
Cartridge 40 w/Nut
Coil w/Spade Terminals
O Ring for Base Lug
Base Lug w/O-Ring
25634
56131
56131K
56134K
55363
56035
56130
25556A
56133
25861
55984
25635
22511
49227
49228
49229
49230
25618
25968
REPLACEMENT PARTS FOR FISHER® PLOWS
LOC.- Location on
Drawing
219
REPLACEMENT PARTS FOR FISHER® PLOWS,
*For New
Replaceable
Cutting Edge Only
LOC.- Location on
Drawing
LOC.
PART NO.
9
10
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
1
2
3
3
3A
4
5
6
7
N.I.
8
11
12
13
00
14
15
16
N.I.
17
18
19
20
21
22
23
24
00
25
26
27
27
28
29
30
31
32
33
N.I.
N.I.
N.I.
34
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
N.I.
1304300
1304305
1304310
1301300
1301305
1301310
1301315
1301350
1301355
1308300
1302300
1303300
1303305
1303310
1303315
1303320
1302305
1302310
1302312
1302315
1302320
1302325
1302330
1302335
1302340
1302347
1302345
1302350
1304340
1304345
1304350
1304315
1304320
1302355
1304325
1304330
1304335
1305300
1305305
1305310
1306400
1306405
1306410
1306415
1306420
1306423
1306425
1306430
1302360
1306435
1306440
1306445
1306450
1306455
1306460
1302365
1306465
1302370
1302375
1306470
1306475
1302380
1313100
1313105
1313110
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
1-1/2” x 12” Angling Cylinders
1-1/2” x 10” Lift Cylinder
2” x 16” Cylinder
*7-1/2’ Cutting Edge
*8’ Cutting Edge
9’ Cutting Edge
10’ Cutting Edge
(9 pcs.) 1/2” x 2” Carriage Bolt w/Locknut
(12 pcs.) 5/8” x 2-1/2” Carriage Bolt
w/Locknut
Flexible Blade Guide (1 Pair)
Machine Pin w/Cotter
6” Anti Wear Shoe Assembly
7” Anti Wear Shoe Assembly
Shoe Tube Holder
Shoe Spacer
Shoe Pin
Trip Spring Assembly
Trip Spring
Removable Spring Tool
Spring Bar (Replaces B403)
1” x 3-1/4” Clevis Pin (Replaces B314)
Cylinder Pin (Replaces B883)
Connecting Pin Assembly (Replaces
BA811)
Connecting Pin (Replaces B820)
Spring for Connecting Pin
(10 pcs.) 1/4” x 2” Zinc Cotter Pin
(10 pcs.) “E” Retaining Ring 1”
Pivot Pin (Replaces B4972)
36” H.P. Hose (Indiv. Bagged)
1/4” Brass Street EII (Forged)
1/4” Brass Bar Street EII25634
1/4” x 900 Swivel Adapter
1/4” Hex Nipple
(10 pcs.) Snap Ring 7/8”
Disconnect Assembly (Individually
Bagged)
Dust Plug - Male
90o Swivel Adapter
Seal Kit, 1-1/2”
Seal Kit 2”
Cylinder Packing Nut
Solenoid
Joystick Cable
Joystick Cable, Adjustable
Motor 4-1/2”
Pump Reservoir - 291 CIR
Clutch 4-3/4” for 1306420
Filtration Kit for 1306420 Compact
Design, Full Size w/Replaceable Element
Cap and Dipstick
Clevis, U-Bolt w/Nuts
Seal, Motor to Pump
Solenoid
Bolt Assembly
Rod, Disconnect A Frame
Adaptor, 1/4”NPT to 9/16” O-Ring
Pin, 1-1/4” x 5-1/2”
Pin, 1-1/4” x 4-3/4”
O-Ring for Base Lug
Base Lug, 1” Hole w/O-Ring
10-24 x 3/8 Set Screws
40” SLC Cable
90” SLC Cable
30” SLC Cable
220
Continued
A3660
A318
A5166
5532
5533
5534
3507
5551
5572
A5108
5523
A5516
A5517
6821
307
308
A3770
305
20043
6631
6814
6816
6920
6815
821
N/A
330
6817
4424
2780
765
319
5804
4485
A1587
1588
2315
339
3623
340
5794
A5843
A5844
A5819
A2311
N.A.
8764
4461
A6148
6578
3981
5797
5798
5799
A1122
3
3058
5142
5150
5823
5824
6062
A4488
A4490
A4949
REPLACEMENT PARTS FOR DIAMOND® PLOWS
LOC.- Location on
Drawing
LOC.
PART NO.
5
6
7
8
N.I.
N.I.
N.I.
N.I.
N.I..
1302100
1302105
1302110
1304100
1304105
1304110
1304115
1304120
1304125
LOC.
PART NO.
1
2
3A
3B
4
9
10
11
12
N.I.
13
14
15
N.I.
N.I.
N.I.
N.I.
1303100
1308006
1302115
1302120
1302125
1302130
1302135
1302140
1302145
1302150
1302155
1302160
1302015
1304025
1304135
1304140
1304145
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Hinge Pin, 1-3/16” DIA X 9-1/2”
Trip Edge Pin, 1-3/16” x 4-3/4”
Trip Edge Pin, 1-3/16” x 2-13/16”
Cylinder, 1-1/2” x 10” (Lift and Angle)
Hose, 1/4”NPT Ends x 34”
Hose, 1/4”NPT Ends x 40
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
Anti-wear Shoe Assembly
Blade Guide Kit (pr.)
RH Torsion Spring
LH Torsion Spring
Spring Sleeve, 13-1/2”
Dust Plug
Lift Cylinder Pin, 1” x 3-1/16”
Cylinder Pin, 1” x 4”
Lift Cylinder Pin, 1” x 4-7/16”
Release Hook
Cylinder Pin, 1 x 6”
Spring, Double Torsion
Trip Spring, Compact Blade
Quick Disconnect
1/4”, 90o Male Elbow
1/4” NPT Male/45o Female Swivel
1/4”NPT Male/90o Male Swivel
221
81100031
81100032
81100033
81700020
816000095034
816000095040
816000095045
816000095056
816000095064
81100011
811000095
811000163
811000162
811000168
81700026
81900016
81900011
81900012
81900013
81900015
8110005
12978
875200100
875210544
875220344
875220244
REPLACEMENT PARTS FOR DIAMOND® PLOWS,
Continued
REPLACEMENT CUTTING EDGES FOR DIAMOND® PLOWS
PART NO.
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
1301100
1301105
1301110
1/2” x 6” x 18”
1/2” x 6” x 45”
1/2” x 6” x 51”
PART NO.
811000233
801100019
80110020
REPLACES O.E.M.
PART NUMBER
DESCRIPTION
1301065
08318
(12) 5/8” Grade 5 Bolts (12) Self
locking Nuts
UNDERSEAT EMERGENCY REPAIR KITS
KIT FOR MEYER® PLOW
Each kit contains the most frequent used “on the job” repair parts. Avoid long waits and after hour
down time. Kits are packaged in a sturdy polythylene box designed for under the seat storage.
Each Kit contains:
QTY.
1
1
1 pr.
1
1
1
1
4
4
1
PART NO.
DESCRIPTION
1302010
1302005
1302045
1304030
1306070
1304055
1304025
1308010
1303035
BRC
Trip Spring
Eyebolt w/nuts
Hinge Pins w/clips
45” Hose w/Swivel
Motor Solenoid
90º Swivel Elbow
HYD. Quick Coupler
Blade Guidetips
Shoe Washer
2-1/2” x 8” x 18” Box
PART NO.
1
REPLACES
O.E.M. PART NO.
07017
09124
08562
21856
15370
21855
15072
1000
20363
N/A
DESCRIPTION
1302099
Emergency kit - MEYER®
KIT FOR WESTERN® PLOW
Each Kit contains:
QTY.
1
1
1
6
1
1
1
1
1
2
1
1
1
1
PART NO.
DESCRIPTION
1302205
1302200
1303215
1303025
1302245
1304225
1304250
1304230
1304255
1302255
1302270
1302275
1306300
BRC
Trip Spring
Eyebolt w/Nuts
Linch Pin
Shoe Washer
Hitch Pin
36” Hose
1/4” 90o St. Elbow
1/4” Hex Nipple
HYD. Coupler
Hairpin Cotter
Chain Bolt and Washer
Locknut
Motor Solenoid
2-1/2” x 8” x 18” Box
PART NO.
REPLACES
O.E.M. PART NO.
23039
90493
93010
91109
93028
55020
92208
25519
25232
91965
90045
91333
25634
N/A
DESCRIPTION
1302299
Emergency Kit -WESTERN®
222
UNDERSEAT EMERGENCY REPAIR KITS
KIT FOR FISHER® PLOW
Each Kit contains:
QTY.
PART NO.
1
4
2
1
2
1
1
1
1
2
1
1
1302300
1303315
1303320
1302320
1302330
1302325
1304335
1306440
1304340
1302355
1304320
BRC
PART NO.
1302399
DESCRIPTION
Pin Assy.
Shoe Spacer
Shoe Pin
1” x 3-1/4” Clevis Pin
Connecting Pin Assy.
Anchor Pin
90o Swivel Adapter
Solenoid
Hose
Snap Ring
1/4” Hex Nipple
2-1/2” x 8” x 18” Box
REPLACES
O.E.M. PART NO.
5523
307
308
6814
6920
6816
2315
3981
4424
4485
5804
N/A.
DESCRIPTION
Emergency Kit - FISHER®
TAILGATE SPREADER
Rugged thermoplasstic hopper resists rust and corrosion. Designed to hold 600 lbs. of # 1 rock salt,
calcium chloride or similar pelletized material of the same size. Spreads from 3 to 30 feet, ideal for
parking lots, driveways, shopping centres, and roadways. Heavy duty sealed ball bearing motor is
controlled by an in cab electronic speed control. Stainless steel spinner and auger assures an even
flow of spreading material. Complete with all mounting hardware and quick detach power cables.
PART NO.
TGS01
SHIPPING WEIGHT
135 lbs.
Replacement Parts
LOC.
1
1
2
3
3A
4
5
6
7
N.I.
N.I.
PART NO.
0200600
0200600Y
0202000
0202100
0202600
0202900
0202800
02028000
0200700
0203300
0206500
DESCRIPTION
Spreader Cover w/Latches - Orange
Spreader Cover w/Latches - yellow
Spreader Replacement Motor
Spreader Augur, Welded
Spreader Spinner Plate - Stainless
Spreader Control
Spinner Hub
Spinner Auger Assembly
Spreader Frame Assembly
Spreader Dummy Mate
Spreader Harness Kit
SHIPPING WEIGHT
7.0 lbs.
7.0 lbs.
11.4 lbs.
2.0 lbs.
2.5 lbs
1.5 lbs
0.5 lbs
5.0 lbs
62.0 lbs
0.5 lbs
1.7 lbs
TAILGATE SPREADER MOUNT
Designed to fit 2” receivers, this mount will allow you to mount and dismount buyers’ TGS01 Tailgate
Spreader quickly and easily. The unique design fits most pickup trucks regardless of tailgate width.
LOC.
8
N.I.
PART NO.
0207000
0207100
DESCRIPTION
Mount
12 Light LED Brake light
LOC.- Location on
Drawing
SHIPPING WEIGHT
43.0 lbs
0.50 lbs
223
ELECTRIC UNIT WITH MANUAL VALVES
A complete power unit featuring a 4-way/3-way manual valve for power up, hold and gravity down of
lift cylinder and Power Reverse™ for angle control. 4-way valve may also be ordered with “float” in
the neutral position for plows with locking pins. 1.3 qt. (76 In.3) reservoir. Horizontal mounting.
PART NO.
B5007
DESCRIPTION
SHIPPING WEIGHT
Electric unit w/Manual Valves
36.0 lbs
ELECTRICAL UNIT WITH MANUAL VALVES
Same unit as above less 4 - way valve. For power up, hold and gravity down.
PART NO.
B5003*
DESCRIPTION
SHIPPING WEIGHT
Electrical unit w/Manual Valves
32.0 lbs
ELECTRIC UNIT WITH PUSHBUTTON VALVES
A complete power unit featuring a pre-wired rocker switch control station. The hydraulic circuit provides fingertip control for power up, hold, and gravity down of the lift cylinder and power reverse for
precision angling. A safety by-pass valve also protects the angling cyllinders should the plow hit a hidden object. 1.0 qt (0.58In 3)capacity reservoir. Horizontal mounting.
PART NO.
B683*
DESCRIPTION
SHIPPING WEIGHT
Electric unit w/Pushbutton Valves
41.5 lbs
ELECTRIC UNIT WITH PUSHBUTTON VALVES
A complete power unit featuring an externally accessible 4-way/3-way valve module for finger tip command. Power up, hold, and gravity down of the lift cylinder and power reverse for precision angling.
1.3 qt. (76 In.3) reservoir. Horizontal mounting.
PART NO.
B693*
DESCRIPTION
SHIPPING WEIGHT
Electric Unit w/Pushbutton Valves
39.0 lbs
ELECTRIC UNIT REPLACEMENT SOLENOIDS
PART NO.
1306505
1306510
DESCRIPTION
SHIPPING WEIGHT
(Insulated) Fits 500 7, 500 3, 683
(Grounded) Fits 693
0.8 lbs
0.9 lbs
ELECTRIC 4-WAY / 3-WAY VALVE D.C. POWER UNIT
Pump/Motor/Reservoir. Externally adjustable system relief valve. Cartridge valves are located externally. 4-way / 3-way function. .250” NPTF outlet ports. Bupass relief valves are located between C1 and
C2 ports. Control station and 6’ cord are included. Triple filtration: suction, high pressure return and
valve body. Horizontal mounting.
PART NO.
PU3593
DESCRIPTION
SHIPPING WEIGHT
Electric 4-way / 3-way unit
4-1/2” x 8” Poly Reservoir 1.36 Quart (79 in3)
34 lbs
* Non-stocking item. Available by special order only.
PLOW SHIELD
Make your old plow LOOK and WORK like NEW!
Tough poly line holds up under the roughest conditions. Super slick surface cuts through and directs
snow more efficiently, saving you time and money.
Plow Shield
PART NO.
DESCRIPTION
1310020
1310220
Yellow Plow Shield w/mounting hardware
Red Plow Shield w/mounting hardware
224
PRO-WING PLOW ATTACHMENT
Pro-Wing provides an additional 20” of blade width with a minimal increase in plow weight. Plowing
time can be reduced from 25-50%. Pro-Wings fit 98% of pick-up mounted snow plows. Pro-Wings
are not recommended for Meyer® 2 meter, Western® 8-1/2’, or any brand 9’ or 10’ plows, except for
Meyer® 9’. Installation is just 3 quick pins per side to remove or replace each wing in seconds. The
tripping action of your plow is unaffected by Pro-Wings. The rubber edge on the wings is long lasting
and helps prevent damage to the wing. U.S.PATENT # 4-962-600
PART NO.
SHIPPING WEIGHT
PW22
62 lbs.
CURB GUARDS
Protects from damage caused by contact with curbs. Easy to install on any plow with “Highway Punch Plate
Pattern” hole style. Constructed of heavy duty 1/2” steel, fits most 9’ plows and all 10’ with highway punch.
PART NO.
1301800
1301805
1301815
DESCRIPTION
Curb Guard, Right Hand - Commercial Plow
Curb Guard, Left hand - Commercial Plow
Curb Guard, Universal - Commercial Plow
HIGH VISIBILITY COMMERCIAL AND MUNICIPAL BLADE MARKERS
Fluorescent Orange Color
This Extra heavy duty marker was designed for highway and municipal plow requirements. The 3/4”
O.D. tube is constructed of low temperature nylon with a full 1/8” wall size. The 28” long marker offers
240 % more surface area than conventional markers. These markers are sold in sets of two with fasteners included. Standard kit is for vertical mounting, horizontal and angle adapter kits are illustrated
below.
NEW!
NEW!
PART NO.
1308102
1308105
1308110
1308115
1308120
1308125
1308150
DESCRIPTION
SHIPPING WEIGHT
Marker Kit 1/2” Dia. x 24” Straight Base
0.6 lbs
Marker Kit 28” Long (B2028)
0.8 lbs
1.0 lbs
1.1 lbs.
Angle Adapter Kit
0.5 lbs.
Horizontal Adapter Kit
0.5 lbs.
Highway plow Marker Kit 1-1/4” O.D. x 24”
1.5 lbs.
Yellow Polypropylene Tube w/Rubber hose Mount
BOLT ON SNOW DEFLECTOR
!
NEW
The
SNO-GUARD
T/M
The SNO-GUARD is a flexible snow deflector that you mount to the top edge of your plow blade. It
works the same as an add on curl or blade extender to curl the snow outward and forward, away from
your windshield and grill.
It is made from a very tough and durable nylon and rubber material that will stay flexible when cold
and won’t crack or split. It has been used very successfully by many towns and individuals and has
held up for many plowing seasons.
SNO-GUARD installs very easily and comes cut to your blade length, pre drilled, and with all grade 5
high quality hardware to fit your plow.
• Helps protect truck paint from scratches & chips.
• Helps stop windshield pitting from rocks and sand.
• Less buildup of slush and ice on wipers and windshield.
• Helps keep ice and slush from clogging grill and radiator.
• Available from 6’ to 10’ length.
225
RUBBER CUTTING EDGES
All S.A.M. rubber cutting edges are furnished with 3 1/2” long slots
for adjustment. Allow 10 days for fabrication of non-stock rubber
cutting edges.
FOR MEYER® PLOWS
(Includes mounting hardware)
PART NO.
1312005
1312010
1312015
1312020
1312025
1312030
1312035
1312040
DESCRIPTION
REPLACES O.E.M.
PART NUMBER
SHIPPING
08186
08187
08188
08189
08190
08191
08192
08193
24.5
39.5
43.0
48.0
48.5
59.7
78.0
83.0
REPLACES O.E.M.
PART NUMBER
SHIPPING
Two Meter 1” x 6” x 78”
ST-78 1-1/2” x 8” x 78”
ST-84 1-1/2” x 8” x 84”
ST-90/C7.5 1-1/2” x 8” x 90”
C-8 1-1/2” x 8” x 96”
C8.5 1-1/2” x 8” x 102”
HM-9 1-1/2” x 10” x 108”
HM-10 1-1/2” x 10” x 120”
WEIGHT
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
FOR WESTERN® PLOWS
(Includes mounting hardware)
PART NO.
1312105
1312110
1312115
1312120
1312125
1312130
1312135
DESCRIPTION
6-1/2’ Standard 1” x 6” x 78”
7’ Standard 1-1/2” x 8” x 84”
7-1/2’ Standard 1-1/2” x 8” x 90”
8’ Standard 1-1/2” x 8” x 96”
8-1/2’ Standard 1-1/2” x 8” x 102”
9’ Standard 1-1/2” x 10” x 108”
10’ Standard 1-1/2” x 10” x 108”
WEIGHT
608261
608262
608263
608291
608321
608321
608323
25.4 lbs.
43.0 lbs.
44.0 lbs.
30.3 lbs.
59.7 lbs.
78.0 lbs.
87.0 lbs.
DESCRIPTION
1” X 6”
1-1/2” X 8”
1-1/2” x 10”
1-1/2” x 12”
Pricing includes cutting to
length, and punching slots.
SINGLE & DOUBLE ACTING HYDRAULIC CYLINDERS FOR HIGHWAY PLOWS
PART NO.
DESCRIPTION
BORE
STROKE
1304505
1304510
1304515
1304520
1304525
1304530
1304535
1304540
1304545
1304515
1304510
1304510
1304515
1304520
1304550
1304505
1304510
1304505
1304510
1304515
1304520
1304555
1304560
Standard 1-1/2” x 10”
Standard 2” x 10”
Standard 21/2” x 10”
Standard 3” x 10”
Replaces Husting Hitch 3” x10”
Replaces Gledhill 21/2” x 10”
Replaces Gledhill 3” x 10”
Replaces Flink 3” x 10”
Replaces Henke 3” x 9-1/2” (Double Act)
Replaces Henke 21/2” x 10”
Replaces Henke 2” x 10”
Replaces Good Roads 2” x 10”
Replaces Good Roads 21/2” x 10”
Replaces Good Roads 3” x 10”
Replaces Good Roads 3”x10”(Double Act)
Replaces Schmidt (Wausau) 11/2” x 10”
Replaces Schmidt (Wausau) 2” x 10”
Replaces Valk 11/2” x 10”
Replaces Valk 2” x 10”
Replaces Valk 21/2” x 10”
Replaces Valk 3” x 10”
Replaces Valk 4” x 10” (Double Act)
Replaces Valk 4” x 22” (Double Act)
1-1/2”
2”
2-1/2”
3”
3”
2-1/2”
3”
3”
3”
21/2”
21/2”
2”
21/2”
3”
3”
11/2”
2”
11/2”
2”
21/2”
3”
4”
4”
10”
10”
10”
10”
10”
10”
10”
10”
91/2”
10”
10”
10”
10”
10”
10”
10”
10”
10”
10”
10”
10”
10”
22”
ACTING PIn
EYE
PORT
SIZE
Single
Single
Single
Single
Single
Single
Single
Single
Double
Single
Single
Single
Single
Single
Double
Single
Single
Single
Single
Single
Single
Double
Double
1/4”NPT
1/4”NPT
3/8”NPT
3/8”NPT
3/8”NPT
3/8”NPT
3/8”NPT
1/2”NPT
3/8”NPT
3/8”NPT
1/4”NPT
1/4”NPT
3/8”NPT
3/8”NPT
3/8”NPT
3/8”NPT
1/4”NPT
1/4”NPT
1/4”NPT
3/8”NPT
3/8”NPT
3/8”NPT
3/8”NPT
1-1/64”
1”
1”
1-1/64”
1-1/64”
1-1/16”
1-1/16”
7/16”
1”
1”
1”
1”
1”
11/64”
11/64”
11/64”
1”
11/64”
1”
1”
11/64”
11/64”
15/16”
PORT
LOCATION
Inline
Inline
90o
90o
90o
90o
90o
Inline
90o
90o
Inline
Inline
90o
90o
90o
Inline
Inline
Inline
Inline
90o
90o
90o
90o
ROD
FLAT
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
2-13/16”
2-13/16”
DIM
DIM
CLOSED OPEN
17”
71/4”
8”
18”
21”
17-7/8”
18-1/4”
17-3/4”
19-1/2”
8”
71/4”
71/4”
8”
18”
20”
17”
7-1/4”
17”
7-1/4”
8”
18”
20”
32”
27”
171/4”
18”
28”
31”
27-7/8”
28-1/4”
27-3/4”
29-1/2”
18”
171/4”
171/4”
18”
28”
30”
27”
17-1/4”
27”
17-1/4”
18”
28”
30”
54”
O.E.M.
REFERENCE
STD.
STD.
STD.
STD.
R310
PD832
PD937
464K
7080104
7080101
7080103
61200344
62100383
62101007
99806239
W9C03493
W9C04057
CS1510
CS2010
CS2510
CD3010
CD4010
CD4022
226
REPLACEMENT CYLINDER INFORMATION
PART NO.
1304305
1304300
1304310
1304010
1304015
1304005
1304020
1304210
1304200
1304215
1304220
1304205
1304100
REPLACES O.E.M.
PART NO.
A318
A3660
A5166
O5437
O5752
O5810
O5984
25200
25209
25210
25878
56102
81700020
BORE X
STROKE
1-1/2 X 10
1-1/2 X 12
2 X 16
1-1/2 X 12
2 X 12
1-1/2 X 10
1-1/2 X 6
1-1/2 X 6
1-1/2 X 10
2X6
2 X 16
1-1/2 X 10
1-1/2 X 10
“A”
16 5/8
18 1/2
22 9/16
17 11/16
17 1/4
15 1/2
11 7/16
12 9/16
16 5/8
12 9/16
22 9/16
16 9/16
16 5/8
“B”
18 3/4
20 3/4
24 13/16
19 1/2
19 1/2
17 11/16
13 7/8
14 7/16
18 1/2
14 11/16
24 13/16
18 3/4
18 3/4
“D”
“C”
28 3/4
32 3/4
40 13/16
31 1/2
31 1/2
27 11/16
19 7/8
20 7/16
28 1/2
20 3/4
40 13/16
28 3/4
28 3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
3/4
3/4
3/4
3/4
“E”
“F”
2 11/16
2 5/8
2 9/16
2 1/8
2 3/16
2 1/8
2 1/8
2 11/16
2 3/4
2 9/16
2 9/16
2 11/16
2 11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
“G”DIA
“J”DIA
PORT/CLEVIS PIN
RELATIONSHIP
1 1/2
1 1/2
2.0
1 1/2
1 5/8
1 1/2
1 1/8
1 1/2
1 1/2
2.0
2.0
1 1/2
1 1/2
1.0
1.0
1 1/4
5/8
5/8
5/8
5/8
3/4
1.0
3/4
1.0
3/4
1.0
In Line
90o Apart
90o Apart
In Line
In Line
In Line
In Line
In Line
In Line
In Line
In Line
90o Apart
90o Apart
LBS./CYL
13
14.5
28.5
14
21
12.5
9.25
10.5
13
16.25
28.5
13.25
13
COLOR
Black
Black
Black
Yellow
Yellow
Yellow
Yellow
Black
Black
Black
Black
Black
Black
REPLACEMENT SOLENOID INFORMATION
MEYER® TYPE
1306070
WESTERN® TYPE
1306300 (STD)
1306305(H.D.)
MONARCH® TYPE
1306505
1306510
FISHER® TYPE
1306440
PART NO.
1306070
1306300
1306305
1306505
1306510
1306440
REPLACES O.E.M.
PART NO.
15370
25634
56131
63336
63427
3981
WIRING
DIAGRAM
STYLE
5
6
6
6
5
6
1
2
4
3
3
3
CONSTRUCTION
PLASTIC CASE
PLASTIC CASE
STEEL CASE
STEEL CASE
STEEL CASE
STEEL CASE
DUTY
INTERMITTENT
INTERMITTENT
CONTINUOUS
CONTINUOUS
CONTINUOUS
CONTINUOUS
227
SUSPENSION PRODUCTS - TIMBREN
TIMBREN RIDE CONTROL
WHAT IS TIMBREN?
Timbren is a suspension product which enhances a vehicles empty ride quality, while providing protection against overloading, road shock, bottoming out, sway, and broken
springs. They also prevent front end nosediving, providing a smooth, level ride even with
heavy loads. They are presently in use on thousands of vehicles throughout the world.
HOW DOES IT WORK?
Mounted between the truck frame and the axle, Timbren Hollow Rubber Springs work in
conjunction with your existing suspension to improve the ride of your truck and to protect
your vehicle against overloading. No special tools are required to install your Timbren kit.
Just follow the easy, complete instructions to enhance handling and increase stability for
both front and rear applications.
FRONT SUSPENSION STABILIZER KITS
Truck equipment manufacturers and distributors have found Timbren front Suspension
Stabilizer kits to be a simple, effective, maintenance free method of adding capacity to the
front suspension of vehicles equipped with snow plows, sweepers, winches, cable reels,
and to trucks equipped with air life auxiliary axles. Cab forward model trucks, recreational
vehicles, ambulances, buses and vans use Timbren Suspension stabilizer kits to add roll
stability, prevent front end sag and provide a comfortable ride.
SINGLE AXLE REAR SUSPENSION KITS
Timbren Ride Control Products for single axle rear suspensions were initially developed for
the towing industry. Tow trucks carrying the heaviest loads imaginable required the most
powerful Aeon Hollow Rubber Springs to solve load distribution and severe rear spring sag
problems. Not only did Timbren solve these problems, they also provided superior ride
quality. Owners also found that their suspensions and vehicles lasted longer. Suspension
Stabilizer kits are now available for the rear of virtually every truck and van on the road
today.
TANDEM AXLE REAR SUSPENSION KITS
Although Timbren Ride Control Products for tandem rear suspension systems were initially
developed for off-road and severe service applications, vehicle operators noted an immediate
improvement in ride quality when the vehicle was empty. Research has shown that improvements in ride while empty are due to the progressive rate Aeon Hollow Rubber Spring which
absorbs shock from the rear suspension that is normally transmitted to the frame. Down time
and maintenance costs are dramatically reduced over the life of the vehicle.
228
SUSPENSION PRODUCTS - TIMBREN
PICKUPS, VANS, SPORTS UTILITY VEHICLES, RV’S
Whether you demand maximum performance every day from your truck, van or RV, or just
haul an occasional heavy load, Timbren Ride Control Products will give you added stability, reduce sway and prevent suspension sag. And they work transparently with the vehicle suspension to provide exceptional ride quality at all times. You can be certain that
there is a custom fit kit for your specific need. Each kit comes complete with all the necessary parts and instructions for easy installation.
EMERGENCY VEHICLES
While enjoying the smooth ride Timbren products provide,
ambulance drivers, rescue squadrons and fire departments
count on our Ride Control products to add stability when
maneuvering at high speed with heavily loaded equipment.
Designed to provide maximum suspension performance under
the most adverse operating conditions, Timbren kits are trouble
free, maintenance free and guaranteed for life.
DELIVERY VANS, UTILITY TRUCKS, DUMP TRUCKS
Perhaps the most versatile vehicles on the road today is the light and medium duty cab
and chassis on which equipment manufacturers and distributors may install a flat bed, utility body, recycler, dump body, crane, van or any other specialized piece of equipment.
Timbren Ride Control products provide added stability, prevent front or rear end sag and
correct a list problem. Timbrens are the obvious choice over helper springs, air bags or
spring build up.
UTILITIES & GOVERNMENT FLEETS
For over 25 years we have worked closely with design staff of
truck and equipment manufacturers. Our engineers have a
wealth of experience in developing new products for various
types of fleet operations. We understand the needs and requirements of fleet administrators who operate large or small fleets of
diversified, specialized equipment. You can trust Timbren to provide you with an effective, permanent solution.
CONSTRUCTION AND OFF-ROAD VEHICLES
Mining, logging, construction and waste management fleets operate in the most severe
conditions possible. Timbren Ride Control Products add stability and prolong suspension
and vehicle life. Downtime and operating costs are reduced. For over 25 years, off-road
vehicle manufacturers have counted on Timbren to protect their vehicles in severe service
applications.
229
SUSPENSION PRODUCTS - AIRLIFT
WHEN YOU NEED A LIFT.... CHOOSE
230
REPLACEMENT 4WD HUBS
PREMIUM HUBS
PREMIUM 4WD HUBS FOR
DOMESTIC AND IMPORT VEHICLES
• Premium classic design and durability ... full metal cap and body.
• Better fuel economy ... because there's less drag on your engine.
• More miles from your front tires ... since they rotate freely. Also allows
you to steer more freely in turns.
• More power and performance ... since front drivetrain isn't rotating;
engine has reduced load.
• More comfortable ride ... steering is lighter, and there is less tendency
to shimmy; drivetrain noise and vibration are also reduced.
• Better 4wd ... performance when the hubs are locked. Works in
reverse and compression braking. No slippage or partial
engagement/disengagement problems.
• Full Metal Durability
• Works in reverse and compression braking. No slippage or partial
engagement/disengagement.
• Free limited lifetime warranty
APPLICATIONS BY VEHICLE
CHEVROLET/GMC/GEO
INTERNATIONAL HARVESTER
REPLACES FACTORY AUTOMATIC HUBS
Scout '60-71
Scout II, Terra, Traveler '72-80
1/2, 3/4 Ton Pickup '56-67
1/2 Ton Pickup '68-75
Travelall '68-75
Blazer, Jimmy, Suburban '69-91
1/2 ton Pickup '69-87
K30 1 Ton Pickup '76-91
LUV 4x4 ALL
GEO Tracker ALL
400518
400518
400517
400518
400439*
400522
400538
JEEP
CJ, Universal '42-71
J10 Pickup '74-90
J20 Pickup '74-96
J30 Pickup '77-90
Wagoneer, Cherokee, Gladiator '74-90
CHRYSLER
1/2 Ton Pickup, Ramcharger & Trailduster ' 81-84
Arrow, D-50 4x4 Thru '81
D-50 Ram 50 4x4 '82-93
Power Wagon WC-50 & 60 '42-56
WM300 '57-75
W250 & W350 4x4 '91
W300 Dodge 1 Ton '79-89
W350 4x4 '93
400517
400518
400517
400518
400528
400543
400508
400508
400439*
400541
400439*
4x4 Pickup 4Runner IFS '86-93
Mid-Size Pickup T100 '93-94
Van, Previa '86-94
Bronco '66-86
1/2 Ton F150 '76-96
3/4 Ton F250, 3,000-lb. Axle '59-75
3/4 Ton F250, 3,500-lb. Axle '63-77
3/4 Ton F250 series, 3,500-lb Axle '78-86
3/4 Ton F250 & Crew Cab, 3,800-lb.
Axle (Internal Mount) '78-96
1 Ton F350 Series, 4,500-lb. Axle '76-96
Dana
Dana
Dana
Dana
Dana
Dana
400518
400518
400518
400518
400518
400518
400517
400518
400513
400513
400513
COMMERCIAL TRUCKS AND H.D. AXLES
REPLACES FACTORY AUTOMATIC HUBS
REPLACES FACTORY MANUAL HUBS
400501
400502
400526
400518
400517
400518
400518
TOYOTA
FORD
Bronco '87-96
1/2 Ton F100 '59-86
1/2 Ton F150 '76-96
400501
400502
400517
400518
400518
25/27 Axle, 10 Spline
30 Axle, 27 Spline
44 HD Axle 19 Spline (External Mount)
44 Axle 19 Spline (Internal Mount)
60 Axle 30 Spline (Internal Mount)
70 Axle
4 X 2 CONVERSION
KITS AVAILABLE
• Convert Ford and Chevrolet trucks
with "New Process" 203 full-time
transfer case to part time 4WD/2WD.
Call for applications / pricing.
400439*
400439*
231
400501
400502
400517
400518
400439*
SNOW TIRE CHAINS
INCREASE TRACTION WITH LUG-REINFORCED TIRE CHAINS AND ACCESSORIES.
SINGLE AND DUAL CHAINS
We stock passenger car, light truck,
one-ton & larger truck tire single and
dual chains. All are lug reinforced.
Commercial grade, lug reinforced chains to fit a variety of
passenger car and truck tire sizes are available.
Higher speed traction cables for passenger cars also available.
Chains are available for forklift, snowthrower and
garden tractors.
TIRE CHAIN ADJUSTERS
Designed for use where tire chain clearance space is minimal.
These adjusters help keep tire chains tight at low speeds before
centrifugal force takes over.
Part #
0214
0225
0229
Passenger Rubber Adjusters (pair)
Light Truck Rubber Adjusters (pair)
Heavy Truck Rubber Adjusters (pair)
6302
6303
6304
Passenger Spring Adjusters (pair)
Heavy Truck Spring Adjusters (pair)
Tractor/Grader Spring Adjusters (pair)
REPLACEMENT CROSS CHAINS AND SIDE CHAINS
Lug reinforced cross chains packaged 10/box and side chain by
the reel. Keep a box or reel on hand for replacement of damaged
chains.
MEDIUM DUTY TIRE CHAIN TOOL
A compact yet rugged tool for opening and closing chain cross
links. Designed for car and light truck tire chains. Fits easily into
your tool box for on the road repairs.
Part #
7301
7 inch Passenger Tool
HEAVY DUTY TIRE CHAIN TOOLS
A professional tool designed for fleet and heavy duty use. Steel
handles with heat treated alloy steel jaws. Spreads and closes
truck tire chain links.
Specialty hooks and other snow
chain accessories also available.
Part #
7303
7302
232
Light Truck Tool
33.5” Truck Tool
WARNING BEACONS
ROTATING BEACONS
769A
769MA
769-25A
L2-77
Amber
Magnetic, Amber
Amber Repl. Lens
Repl. Strobe Tube
Box
Box
Box
Box
1
1
1
1
ROTATING BEACONS
HALOGEN ROTATING BEACONS
Mid-size rotating beacons.
Non-corroding bases.
Optional magnetic mount available.
Single reflector, snap- style 50 watt halogen light.
RB6PAP - Permanent Mount
RB6PAM - Magnetic Mount
L22HAP - 12 VDC, Combination Mt.
L22HAM - 12 VDC, Magnetic Mt.
with 10’ Cord & LED Switch Indicator
MULTIPLE FLASH PATTERNS!
233
WARNING LIGHTS - STROBE BEACONS
BEACONS
LED BEACONS
SUPER LED LIGHTING!!
1502A
L53AM
L53AP
10/80 VDC, Perm Mount
- 12 VDC, Perm Mount, Amber
- 12 VDC, Magnetic Mount,
with cigar plug, 8’ cord, Amber
2000 SERIES BEACONS
2004BLA 4.2 Joule, Low Profile Perm Mt
2004BLAM 4.2 Joule, Low Profile Mag Mt
2004BHA 4.2 Joule, High Profile Perm Mt
2004BHAM 4.2 Joule, High Profile Mag Mt
2012LPA - 8 Joule, Low Profile Perm Mt
2012LPAM - 8 Joule, Low Profile Mag Mt
2012HPA - 8 Joule, High Profile Perm Mt
2012HPAM - 8 Joule, High Profile Mag Mt
2022LPA 19 Joule, Low Profile QuadFlash, Perm Mt
2022LPAM 19 Joule, Low Profile QuadFlash, Mag Mt
2022HPA 19 Joule, High Profile QuadFlash, Perm Mt
2022HPAM 19 Joule, Low Profile QuadFlash, Mag Mt
SUPER LED LOW PROFILE BEACONS
L32LAF - 12VDC, Permanent Mt., Amber
L32LAM - 12VDC, Magnetic Mt., Amber, 8’ cord cigar plug
234
LIGHTBARS
9M FULL LENGTH STROBE LIGHTBARS
9M142000
55” Strobe Bar, 4 Corner Linear Strobes Only
9M148000
49” Strobe Bar, 4 Corner Linear Strobes Only
9M140W00
60” Strobe Bar, 4 Corner Linear Strobes,
Rear Work Lights, Rear LED Stop, Signal & Tail
ADD-ON LIGHT BAR ACCESSORIES FOR 9M BARS
MKTD2
MKALY
MKH2**
MKH4**
One Pair of Take-Down Lights
One Pair of Alley Lights
2 Pak Halogen Flashers w/Steady Burn Mode, 2 - 5” Lenses
4 Pak Halogen Flashers w/Steady Burn Mode, 4 - 5” Lenses
MINI LIGHTBARS
G1PA
G1MA
G7PA
G7MA
235
STROBE LIGHTHEADS
VP20 SERIES
Value Lighting Systems
Create a 2-light strobe system with your choice of lightheads & power supply
or choose 2 lights to expand an existing hide-away system.
VP20HDA
Round Lens
VP27HDA
Low Profile Amber
VPPS2E
VP28HDA
VP29HDA
Grommet Mt Amber
Flange Mt Amber
2 Head 20W Power Supply
SUPER-LED MINI-STROBE LIGHT MODULES
TIR3 DIMENSIONS
236
REMOTE PACK STROBE COMPONENTS
POWER SUPPLIES & HIDE-A-WAY STROBE KITS
REMOTE PACK POWER SUPPLIES - QUADFLASH STANDARD
Whelen Remote Pack Series QuadFlash strobe power
supplies offer a selection of output power, capability and economy that will serve a wide
variety of applications and budgets - from the two outlet VPPS2E to the six outlet CSP660.
These power supplies all feature input reverse polarity protection, output short circuit protection and a two year warranty.
Most importantly, choose your power supply according to the light intensity your
application requires and use the power supply's output power rating as your guide.
Buyer beware: although a power supply's performance is based on output power,
some manufacturers describe their power supplies according to input power.
Power supply specifications are listed below.
POWER SUPPLY SPECIFICATIONS
Description
Outlets
Input Voltage
Output Power, total
Output Power, per outlet:
Two outlets connected
Four outlets connected
Six outlets connected
Alternating / Simultaneous
Outlet Operation
Flash Patterns
Weight
SPS660C
VPPS2E
2
12.8 VDC
20 watts
CSP660
6
12/24 VDC
60 watts
CSP690
6
12/24 VDC
90 watts
12.5 watts
-
30 watts
15 watts
10 watts
45 watts
22.5 watts
15 watts
A: 1x1
4
.62 lbs. (.71kg)
A/S: 3x3
10 Scanlock FP
2 lbs., (.9kg)
10 Scanlock FP
2 lbs., (.9kg)
Includes 4 - 15’ Cables
COMPLETE HIDE-A-WAY KITS (Clear bulbs can be replaced with amber)
SPS660C
WHELEN 60W, 6 Head Power Supply,
4 - 15’ Cables
4 soft “plug-in” clear bulbs
SPS660C-6
STAR 60W, 6 Head Power Supply,
6 - 15’ Cables
6 “plug-in” or flange mt. clear bulbs
SPS660C-A20
4 - 20’ Cables
2 “plug-in” or flange mt. amber bulbs
SPS660C-D4
STAR 75W, 4 Head Power Supply
2 - 20’ & 2 - 25’ Cables
with bulb end deutsch fittings
with waterproof deutsch fittings
SPS660C-SO
STAR 75W, 4 Head Power Supply
4 - 15’ Cables
SPS660C-XL
2 - 20’ & 2 - 25’ Cables
with bulb end deutsch fittings
with waterproof deutsch fittings
HIDE-A-WAY KITS CAN BE BUILT TO YOUR SPECS! - CALL US!
HIDE-A-WAY BULBS
SWITCHES
Concealed Hide-A-Way mounting requires only
1” diameter cutout. For use in composite headlight,
cornering light or brake/tail/turnlight assemblies.
S30HACP
S30HAC
S30HA
S30HAR
S30HAAD
S30HACPD
Soft “plug-in” style clear, 1” diameter cutout
Flange mount clear
Flange mount amber
Flange mount red
Flange mount amber w/deutsch connector
Flange mount clear w/deutsch connector
2SWITCH
PSW2 - On/Off switch for strobes
2SWITCH - 2 Switch Bracket
w/ 2 illuminated on/off switches.
15amp contacts
OTHER SWITCHES AVAILABLE
PLEASE CALL
Cables are available in various lengths, with or without Deutsch fittings - Call us today!
237

SnowSport Utility Plow

Transcription

Similar documents

Nordic Plow for Dixie Chopper Zee 2

UTV TRIP EDGE SNOW PLOW - Sno

to the PDF

Where you come to know.

Snow Break - Quick Attach Attachments, Inc.

The First Snow Plow Designed For An Everyday Car!

Snow Plow Specifications

Paul Strisik NA - American Fine Art Magazine