Scissors

Transcription

Scissors

C A T A L O G U E
O F
R O B U S O
P R O D U C T S
29
Legend
Erläuterungen
to Symbols
der Symbole
11
28
Covering
zu unseren
our product
eigenenlines:
Marken:
27
ROBUSO/Solingen/Germany ®
********ROBUSO/Solingen/Germany
absolute
Spitzenqualität
in Verarbeitung und Ausrüstung
Ourunsere
absolute
Top Grade
Finish Quality
26
*** ***ROBUSO/Solingen/Germany
ROBUSO/Solingen/Germany®®
Meisterqualität
in überdurchschnittlicher
guter Verarbeitung
Ourunsere
Master-crafted
Quality
in above-average finish
®
eine gute
® Solingen Qualität in Standardausführung
PELLORO
Imported Products
(except for Art.-No. 1061/1062) of acceptable
*
PELLORO®
budget-priced Standard Quality
24
*
Screw
Hollow Ground
Inner Blade
23
ist importiert und bis auf zwei Ausnahmen (Art.-Nr. 1061/1062) eine
preiswerte Standardqualität
Outside Products:
22
✦✦✦✦
9
25
ROBUR/Solingen/Germany ®
Solingen-Product ®Quality Standard
** A reliable
ROBUR/Solingen/Germany
10
Shank
und Ausrüstung
**
Cutting
Edge
Top Grade Technology Product Shears
Eye
zu Marken anderer Hersteller:
✦✦✦
Shears
of exceptional
Finish Spitzenleistung
Quality
Scheren
als technologische
✦✦
Shears
of acceptable Quality Standard for use in Industry and Trade
Scheren in außerordentlich guter Verarbeitung und Ausrüstung
✦✦✦✦
8
Low-priced Shears
✦✦
Scheren als gutes Werkzeug für den industriellen Einsatz
✦
Outer Blade Surface
19
Scheren in niedriger Preislage
Best-Runners= most popular products in demand
C60
17
C60
7
18
Best Runners = Dieser Hinweis ist als Entscheidungshilfe gedacht
und weist auf die Artikel hin, die am meisten nachgefragt werden.
Grade C60 carbon specialty steel featuring an exceptionally
high
hardness
of ca.Rohmaterial
59 HRC (inKohlenstoffstahl
contrast to grade
Hinweis
auf dasrating
verwendete
C60 C45
standard
steel)zum
providing
for above-average
cutting
efficiency.
(im Gegensatz
Standardmaterial
C45), zeichnet
sich aus
durch
Upper Blade
16
besonders hohen Kohlenstoffanteil, dadurch besonders hohe Härte
von ca. 59 HRC und überdurchschnittlich gute Schnitthaltigkeit.
15
ZwischenSpring=
den Scherenblättern
ist eine
Innenfeder
montiert,
für
Internal
installed in the
fulcrum
to provide
for die
comforeinenand
leichten
und gleichmäßigen
Gang der Schere sorgt.
table
reliable
cutting operations
14
Schneide,
wodurch
bei–
Diese Scheren haben
eine microverzahnte
Micro-Serrated
Blades=
ideal for use with
slippery
fabrics
glatten Stoffen
das Wegrutschen
verhindert und ein präzises
absolute
controlled
cutting operations
Schneiden ermöglicht wird.
6
20
✦
Lower Blade
Maintenance and Care of Scissors:
These are - like all tools - subject to normal wear. So, keep the
13
inner blade surfaces free from dust and residuals and apply
BeideBlades
Schneiden
sind microverzahnt.
Both
Micro-Serrated
5
21
✦✦✦
12
an occasional droplet of sewing machine oil to the joint faces,
2x
2x
which restores the cutting efficiency and adds considerably to
the service life.
4
11
Bei diesen Scheren verwenden wir eine gehärtete Schlitzschraube
Case-Hardened
Screw= high stability – permanent trouble-free
mit hoher Standfestigkeit, was ein Lockern der Schere zuverlässig
joint
function verhindert.
und dauerhaft
10
Ergonomisch schräg ausgeformte Scherenaugen.
Oblong Eye Design= hand-fit ergo-styled
When Cutting leaves a lot to be desired:
9
Rough and tiresome cutting is not necessarily an indication that regrin-
8
ding is needed. Never attempt to untighten the screw - a thorough
3
Die Blätter der Scheren sind aufgebogen für das Beschneiden von
Bent-up
Blades=
ideal to trim borders and edges
Kanten und
Rändern.
clean-up and lubrication usually work wonders. Failing that, it's time
7
Die GriffeHandles
sind gebogen.
Bent-up
for a regrind service.
ROBUSO Regrinding Service:
5
sie beim Beschneiden von Kanten und Rändern eine bündige
Schnittkante.
Cutting edges tend to wear in the long run, no matter how well
2
6
Die Griffe
sind gekröpft,
das heißt,
sie sind stufig
geknickt.
Offset
Handles=
designed
for controlled
trimming
of borders
Mit gebogenen/gekröpften
Griffen und gebogenen Blättern erzielen
and
edges
shears or scissors are kept. Forward them to us for thorough regrinding, servicing and prompt return. ROBUSO Shears and Scissors are
4
¢ 3 5 T
¢ 3 5 T
2
ROBUSO Stahlwarenfabrik
Telefon: (0212) 815016
ROBUSO
Stahlwarenfabrik
Buntenbach
& Sohn GmbH Telefon:
+49(0212)
- 212 - 810926
81 50 16
Telefax:
Buntenbach
& Sohn
GmbH
Neuenhofer
Straße
75
Telefax:
[email protected]
- 212 - 81 09 26
E-Mail:
Neuenhofer
Straße 75
42657 Solingen
/ Germany E-Mail:
[email protected]
Internet:
www.robuso.de
42657 Solingen / Germany
Internet: www.robuso.de
designed to permit ROBUSO Service regrinding for at least four to five
times. Further details are given in the course of reading through this
catalogue.
1 inch
3
Beratung / Kontakt
Advice and Support
1
Index
SHEARS FOR TECHNICAL TEXTILES
proton-Scissors and Shears
Shears for use with Aramide, glass and carbon fiber fabrics
Scissors and Shears to trim "high-tech" threads
Laminating Shears
Mould-Making Scissors and Shears
ARS Scissors/Shears/Clippers
8/9
10
11
12
13
14
MACHINES
Heavy-Duty Electro-Powered Shears
HOOG's Compact Electro-Powered Rotary Blade Shears
HOOG's Pneumatic Rotary Blade Shears / HOOG's Electro-Powered Rotary Blade Shears - large dias
System Components
HSGM Hot-Melt Cutting
EC Cutter
16/17
18/19
20/21
22
23
24
SHEARS FOR TRADITIONAL TAILORING
ROBUSO ®-Tailor's Shears
ROBUSO®-ELASTIC-Tailor's Shears
ROBUSO ®-Tailor's Shears / KAI Shears and SWISSORS ®
Light-Weight Tailor's Shears / Scissors and Shears for Left-Handers
PELLORO® Pinking and Scalloping Shears / Sewing Scissors
Embroidery and Weavers' Scissors / small Universal Scissors
Quilting Shears and Embroidery Scissors / Paper and Decorator's Scissors
Master-crafted Thread Clippers
Master-crafted Pocket Upholsterer's, Carpeting and Pile Trimming Scissors and Shears
Floor Layer's, Leather and Cardboard Pattern Shears
ROBUR® Light-Weight Scissors and Shears with "Soft-Coat" Plastic Handles
KAI Scissors and Shears
26/27
28/29
30/31
32/33
34/35
36/37
38/39
40/41
42/43
44/45
46/47
48
TOOL ITEMS
Pattern Notchers and Check Markers
Revolving Punch Pliers and Punches
Straight Threadline Cutters and Rotary Blade Cutters
Seam Rippers, Tracing Wheels, Industrial Tweezers
Tailor's Chalk and Marking Pens
Universal and Safety Cutters
50
51
52
53
54/55
56/57
REPAIR AND SERVICING ACTIVITIES
Our Regrinding Services
59
ADVERTISING GIFTS
ROBUSO® Scissors and Shears as the ideal Advertising Gifts
61
3
Illustrations: ROBUSO 1924 Catalogue
"All about us - a self-portray"
joined the company
Detlef continued to run the company until Detlef
and gradually adap-
Mohaupt died in May 1999, upon which Reinhild
ted the production
Mohaupt successfully assumed all managerial
programme to meet
duties to keep the company going along the pro-
the demands and
ven and time-tested ROBUSO tradition, with
requirements of the
Rainer Hückelhoven, a graduated engineer and
garment industry.
company executive, being responsible for tech-
This reorientation
nological research, development and process
proved to be a suc-
optimization services at user level. Concerted
We are an efficient family-held company, ori-
cess both at home and abroad - and a safe step
ROBUSO efforts have, so far, resulted in a supply
ginally founded 1919 in SOLINGEN by Julius
into the future.
range covering manual, electro- and air-powered
shears and scissors - and the provision of all-
Buntenbach, the grandfather of Mrs. Reinhild
Mohaupt, Managing Director.
The production programme was continuously
automatic cutting solutions.
complemented to keep abreast of the markets,
The founder of ROBUSO selected the "PRETZEL"
with priorities focussed on the requirements of
A family-held company like ours, with advanta-
as part of his internationally registered trade
industrial and professional users, namely to pro-
ges such as a clearly defined structural make-up,
mark, with the idea based on the fact that a num-
vide them with high-quality shears and scissors
short decision-making routines and the capacity
ber of bakeries in the Burg district of Solingen
for any and all relevant applications - and all this
to react spontaneously and adequately to chang-
turned out pretzels, a traditional speciality in high
under the motto "Original ROBUSO Quality"
ing market conditions, is bound to cope success-
demand throughout the region and beyond.
exclusively from one source. We are proud to
fully with all the challenges future may have in
state that we have designed and produced
store.
The production of razors, blades and scissors for
shears for use with technical textiles for well
barbers and hairdressers dominated the produc-
over the past 30 years.
ROBUSO and I are sincerely Yours,
tion operations during the first decades of the
company. It was in 1948 when Johann
The third ROBUSO-generation, namely Reinhild
Pukelsheim, the son-in-law of Julius Buntenbach,
Mohaupt, nee Pukelsheim, and her husband
4
Looking forward to good and rewarding relations,
Reinhild Mohaupt
DIN EN ISO 9001 : 2000
Our company is certified on the basis of
we are now proud to state that the relevant
DIN EN ISO 9001:2000 as of March 26,
organizational system is a truly "live" ele-
1997.
ment of our company philosophy.
The above quoted Standard Specification
Customer satisfaction is the essence of
represents a reliable instrument not only
our policy, towards which end we make
to improve the organizational structure of
every effort to prove ourselves as reliable
our company but, also, to assure the quality
and prompt suppliers of high-quality pro-
of our products and image.
ducts as well as capable and resourceful
partners.
Clearly defined organizational routines,
frequent training sessions and a constant
We also engage in developing new shear
flow of inter-company information provide
and/or scissor designs within the scope of
our operating staff with the proper means
ISO 9001: 2000 and in the modification of
required to ensure optimum performance of
existing ROBUSO models to efficiently handle
individual duties and maximum rendition of
current technical textiles and composites.
customer services.
Another aspect is the thorough investigation
of cutting problems at customer level and
Looking back to the date of certification
the development of individual solutions.
5
All about ROBUSO ® Shears and Scissors
Our programme offers three quality grades:
The eye precision finish grinder takes care
ROBUSO Shears and Scissors are the
3 ROBUSO/SOLINGEN/GERMANY
of the inner and outer eye surfaces.
result of painstaking care applied during all
3 ROBUR/SOLINGEN/GERMANY
production sequences involved, ca. 80% of
3 PELLORO
The nickel-plater finishes the ground steel
which are handcrafted. Lacquer-finished
All three names are registered Trade Marks.
surfaces by way of mirror-finish nickel-pla-
handles/eyes coloured wine-red, red/black
ting the eyes and handles - and the grinder
or blue are padded with a soft, transparent
ROBUSO/SOLINGEN/GERMANY
removes the nickel layer from the inside of
plastic coat (polyurethane). Every product
This brand name stands for top grade quality
the hollow ground blade surfaces to produ-
detail is subjected to stringent quality control
and indicates, at the same time, that the
ce a keen long-life cutting edge. A point
inspections to ascertain that ROBUSO Shears
requirements of the SOLINGEN Code of
worth noting: the inner surfaces of high-qua-
and Scissors deserve the "Master-crafted"
Product Quality and of all relevant DIN
lity shears are never nickel-plated.
merit.
words: ROBUSO shears and scissors are cut-
The finished parts are then passed to the
ROBUR/SOLINGEN/Quality refers to good
ting implements designed for maximum effi-
joint finisher for precision mating, which
SOLINGEN-Product quality standard -
ciency.
also includes finish-grinding of the cutting
normally made of forged and hardened plain
edge, and fitting of the screw. Both the
steel, properly machined. The production
ROBUSO Shears and Scissors are made of
grinding operators and the joint finisher are
involves ca. 40% of manual work.
hot-forged high-purity specialty steel, with
responsible for the even and smooth cutting
Handles/Eyes are of black lacquer-finish. Our
the 'industrial' model versions made of
efficiency of ROBUSO Shears and Scissors.
ROBUR product range is limited to the most
Specifications are surpassed by far. In other
C 60 high carbon steel (= HRC 57-59) for
widely used conventional models.
proven "well above average" cutting
The final step is the performance test:
efficiency.
Each product item is subjected to an
PELLORO/Quality refers to imported pro-
efficiency test routine with the material
ducts, quality-controlled and modified by us
The forged blanks are subjected to a har-
it is designed and intended for: Grey cotton
- if necessary. PELLORO products are - as
dening process, with the blades preground
cloth, lining silk, wafer-thin curtain fabrics,
indicated by price - of "Economy" quality.
in modern automated wet grinding systems
leather, Aramide products, etc. One of the
Their production involves ca. 20% of manual
inside and out, as a result of which the
major requirements is to ascertain that all
work. Handles/Eyes are of black
inner sides feature a distinct hollow ground
specimen are perfectly severed in an effort-
lacquer-finish.
surface.
less straight-through cut over the complete
blade length.
Special Requests
The next production steps are the responsi-
We are always open-minded towards special
bility of highly qualified and experienced
requirements and, thus, capable of coming
ROBUSO staff:
up with the unexpected, towards which end
Hand-grinders grind, glaze and polish the
we invite you to let us know what you need
blades and handles manually inside and out.
and/or what is not listed in this catalogue.
6
Shears for
Technical Textiles
Photo: ADCO GmbH, Aachen - www.ad-co.de
ROBUSO-proton ® Scissors and Shears
designed to cut
ROBUSO-proton® for use with:
ROBUSO proton® Shears are:
3 special-formula coating
for extra heavy-duty work
Aramide Fabrics
3 precision-finish ground by hand for
balanced and smoothcutting operations
3 micro-serrated for controlled cuts without
material slippage
Aramide Composites
3 featuring finely finished handles for excellent 'controlled-cut' performance
The special-formula blue-black coating provides for effective protection against abrasive
wear and produces super-hard cutting edges,
rating about 2800 HV. An amazing fact is that
the friction effect, generated during the shearing process, rebuilds the active ceramic oxide
layers continuously, thus making up for any,
otherwise, normal wear.
Aramide Felts
Another benefit of this special-formula coating
is its 'minimized friction effect' providing these
proton® Shears with truly comfortable controlled-handling features.
The chemically indifferent properties of this
coating provide an active barrier against
fouling of the blades - which is very much
in contrast to conventional shears - and
certainly a great advantage when working
with adhesive-bonded materials. proton®
Shears with their 'all-coated' surfaces handles included - can be safely and readily
cleaned with solvent to remove any resin
and/or adhesive residuals, especially for a final
clean-up at the end of each workday.
Art.-No. 1024/S/10"
Size
Order.-No.
10”
1024.121.260
Dyneema®
ROBUSO
SOLINGEN
GERMANY
1024 / S / 10”
%%%%
Total length Length of cut Weight
26 cm
10 cm
361 g
ROBUSO proton**** Cutters' Shears for use with lightC60
to medium-weight Aramide and Dyneema® fabrics
one blade micro-serrated
1024/S/10"
Shown in
original size.
8
TECHNICAL TEXTILES
All ROBUSO proton®
Scissors and Shears
are micro-serrated.
322/S/5"
1026/S
2x
1253/4/S/7"
ROBUSO
MACHINES
SOLINGEN
GERMANY
322/S/ 5”
ROBUSO
ROBUSO
TRADITIONAL TAILORING
SOLINGEN
GERMANY
1253/4/S/7”
ROBUSO
SOLINGEN
GERMANY
1026/ S / 9,5”
SOLINGEN
GERMANY
1071/S/7.75”
1071/S/7.75"
2x
615/S/5"
ROBUSO
TOOL ITEMS
SOLINGEN
GERMANY
615/S/ 5”
Order.-No.
8”
1026.121.210
21 cm
8.0 cm
166 g
9.5”
1026.121.250
25 cm
9.5 cm
230 g
ROBUSO proton**** Cutters' Shears for use with lightC60
weight Aramide and Dyneema® fabrics
designed for use by dainty hands
Art.-No. 1071/S/7.75"
Size
7.75”
%%%%
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
1071.121.200
20 cm
5 cm
208 g
5”
0615.121.130
13 cm
4.2 cm
48 g
ROBUSO proton**** all-purpose Shears for use with lightC60
to medium-weight Aramide and Dyneema® fabrics
ROBUSO proton**** Thread Trimming Scissors for use
C60
with light-weight Aramide and Dyneema® threads
both blades micro-serrated,
rounded blade tips
%%%%
Size
Order.-No.
Total length
Length of cut
Weight
7”
1253.421.185
18.5 cm
6.5 cm
111 g
ROBUSO proton**** Mould-Making Scissors for use with
C60
light-weight Aramide and Dyneema® fabrics
with bent-up blades and handles one blade micro-serrated
Applications:
Trimming of borders and edges of moulded parts
%%%%
Total length
Applications: For forceful short-length cuts, starting cuts
in corners and edges, tapes, thin ropes, cords, hoses – all
with Aramide cores.
Art.-Nr. 1253/4/S/7"
Art.-No. 615/S/5"
Order.-No.
Art.-No. 322/S/5"
Size
Order.-No.
5”
0322.121.130
Applications:
For a multitude of uses, trimming of threads,
etc. Pocketable, thus always ready to hand.
%%%%
13 cm
4 cm
REPAIR AND SERVICING
%%%%
Size
Regrinding Service:
56 g
ROBUSO proton**** Thread Trimming Scissors for use
C60
with light-weight Aramide and Dyneema® threads
ROBUSO proton®-Scissors and Shears are, of course,
reworked and refinished by our Regrinding Services.
ADVERTISING GIFTS
Art.-No. 1026/S
both blades micro-serrated,
rounded blade tips
Applications:
For a multitude of uses, trimming of threads,
etc. Pocketable, thus always ready to hand.
9
ROBUSO ®-Cutters' Shears
for use with glass and coal fiber,
and
1024/C
All Scissors
and Shears
are microserrated.
ROBUSO®-"KOMFORT"
HANDLES:
blue lacquer-finish with
polyurethane coating
1026/C
1081/C/8.5"
1071/C/7.75"
ROBUSO
Handles
bent-up:
1026/3/C/8”
ROBUSO
SOLINGEN
GERMANY
1024 / 10”
ROBUSO
SOLINGEN
GERMANY
SOLINGEN
GERMANY
1081 / 8,5”
1071 / 7,5”
ROBUSO
SOLINGEN
GERMANY
1026 / 8”
Art.-No. 1024/C
%%%
Size
Order.-No.
10”
1024.103.260
26 cm
10 cm
361 g
12.75”
1024.103.330
33 cm
13 cm
553 g
ROBUSO*** Cutters' Shears - solid design for use with
C60
glass fiber, Aramide and Dyneema® fabrics
high-grade hardened blades, precision-finish ground by
hand, one blade micro-serrated, large blue "Komfort"
handles, ideal for big hands.
Positive leverage for high cutting efficiency, the microserrated blade prevents material slippage.
fulcrum point located closer to the blades for positive
leverage. Unusually high cutting efficieny right down
into the tips. An easy-to-handle model, popular with
the "girls".
Art.-No. 1026/3/C/8"
Order.-No.
Total length
Length of cut
Weight
8”
1026.303.210
21 cm
8 cm
166 g
ROBUSO*** Edge Trimming Shears
%%%
Order.-No.
8”
1026.103.210
21 cm
8.0 cm
166 g
9.5”
1026.103.250
25 cm
9.5 cm
230 g
ROBUSO*** Cutters' Shears for use with light-weight, thin
C60
glass fiber Aramide and Dyneema® fabrics
high-grade hardened blades, precision-finish ground by
hand, one blade micro-serrated, blue "Komfort" handles.
This model is a special ROBUSO-development featuring
pointed blades, an extra-large "oblong" eye and a
10
C60
with straight blades and bent-up handles
Art.-No. 1071/C/7.75"
7.75”
Size
%%%
Size
Size
Art.-No. 1026/C
Art.-No. 1081/C/8.5"
%%%
Order.-No.
Total length
Length of cut
Weight
1071.103.200
20 cm
5 cm
208 g
ROBUSO*** Shears for forceful short-length cuts into
light- and medium-weight glass fiber, carbon fiber, Aramide
C60
fabrics, knitteds and felts,
also good for use with tapes, cords,
thin ropes and hoses - all with Aramide cores.
Blades precision-finish ground by hand, one blade microserrated, blue "Komfort" handles.
This model is a special ROBUSO-development featuring
short, sturdy blades and long handles resulting in excellent
leverage for efficient cutting performance right down into
the tips, all providing for forceful short-length cuts.
%%%
Size
Order.-No.
Total length
Length of cut
Weight
8.5”
1081.103.225
22.5 cm
6.5 cm
240 g
ROBUSO*** Shears for forceful short-length cuts into
glass fiber, carbon fiber and Aramide fabrics,
C60
with cutting length somewhat longer than that of
ART.-No. 1071/C/7.5".
High-grade hardened blades, precision-finish ground by
hand, one blade micro-serrated, blue "Komfort" handles.
The shorter blades plus the long handles result in an
excellent leverage for efficient cutting performance right
down into the tips.
Helpful Information:
All of the above scissors and shears are, in principle,
OK for cutting glass fiber, carbon fiber, Aramide or
Dyneema® fabrics, but one should never use a single
pair to cut all or any of the aforesaid materials
because Aramide and Dyneema® products need extremely sharp blade edges whereas glass fiber products
tend to dull the edges in no time at all! Our recommendation: Use one pair exclusively with Aramide and
Dyneema® products and another pair for use with glass
and carbon fiber products and mark these pairs accordingly. You will be surprised how very much longer your
scissors and shears retain their cutting efficiency.
TECHNICAL TEXTILES
ROBUSO ®-Scissors and Shears
designed to trim "high-tech" threads
MACHINES
All Scissors
and Shears
are microserrated.
322/E/5”
615/E/5”
405/C/6"
322/E/5”
ROBUSO
SOLINGEN
GERMANY
322 / 5”
SOLINGEN
GERMANY
615 / 5”
2x
721/E/4”
2x
ROBUSO
SOLINGEN
GERMANY
405 / 6”
ROBUSO
SOLINGEN
GERMANY
322 / 5”
ROBUSO
ROBUSO
SOLINGEN
GERMANY
TOOL ITEMS
721/ 4”
Art.-No. 322/E/5" Both blades micro-serrated
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
6”
0405.103.160
16 cm
5 cm
55 g
5”
0322.124.130
ROBUSO*** Glass Fiber Scissors for light-handed cuts,
C60
made of specialty steel, with high-grade hardened blades,
precision-finish ground, one blade microserrated, hardened screw, "Komfort" handles,
%%%
13.3 cm
5 cm
56 g
ROBUSO*** Weavers' Scissors,
C60
with rounded tips: for safe pocketing during work
This model features narrow, pointed blades and large
handle eyes.
Art.-No. 322/E/5" One micro-serrated blade
Size
Order.-No.
5”
0322.107.130
%%%
13.3 cm
5 cm
ROBUSO*** Weavers' Scissors,
56 g
C60
compact model with optimum leverage, sturdy, pointed
blades made of forged, hardened and nickel-plated
high-carbon specialty steel, inner blades precision-finish
ground, with hardened screw
One blade micro-serrated: for use with glass,
carbon and Aramide thread material
Size
Order.-No.
5”
0615.107.130
%%%
Order.-No.
Total length
Length of cut
Weight
4”
0721.107.105
10.5 cm
3.8 cm
23 g
ROBUSO*** Weavers' and Pocket Scissors for thin threads
C60
Also a popular advertising gift: with gold-plated
handles and your company logo.
13 cm
4.2 cm
ROBUSO*** Weavers' Scissors - Compact Model
48 g
Application Details:
C60
made of forged, hardened and nickel-plated high-carbon
specialty steel, inner blades precision-finish ground, with
hardened screw
%%%
Size
made of forged, hardened and nickel-plated high-carbon
specialty steel, blade inner surfaces unplated, both blades
micro-serrated with rounded tips for safe pocketing during
work.
both blades micro-serrated: for exact trimming
of extremely flat and tough threads like Dyneema®
Art.-No. 615/E/5"
Art.-No. 721/E/4"
%%%
Size
All of the above scissors are suitable for threadtrimming work, but it should be remembered that the
various high-tenacity fiber types feature different
characteristics, thus requiring different cutting qualities.
This follows: The toughness of the material dictates the
type of the scissors. We shall be happy to help you make
your choice - send us your problem material and we
recommend what's best for the application.
11
ADVERTISING GIFTS
Art.-No. 405/C/6"
ROBUSO ®-Laminating Shears
3
3
3
3
made of forged and hardened specialty steel
blades and handles precision-finish ground
completely chrome-plated
1026/B-CR/9.5"
NEW Finish - Coded „B-CR“:
Handles are no longer lacquer-finished the complete shears, handles included,
are now precision-finish ground and
chrome-plated so as to be 100%
solvent-resistant.
ROBUSO
SOLINGEN
GERMANY
1026 / 9,5”
CHROMED
1024/B-CR/10"
ROBUSO
SOLINGEN
GERMANY
1024 / 10”
CHROMED
ROBUSO-Laminating and Mould-Making Shears:
3 straight-bladed for use in glass or carbon fiber
laminating operations
3 bent-up blades:
for surface finishing
3 bent-up blades and handles:
for trimming edges and borders
1150.045.000
Curved blades permit trimming of projecting
fibers - even in hard-to-get-at locations without the risk of piercing material.
Bent-up blades and handles widen the distance
between hand and material, i.e. fingers do not
come in contact with the saturated laminate
fabric and provide for improved control of the cut.
Maintenance and Care:
Working with saturated laminate fabrics is bound
to foul the shears, which are best cleaned by
immersion in a solvent bath. Make sure that residual
resin solutions are not allowed to cure on the
surfaces of the shears. Perform thorough clean-ups
as often as appears necessary - the blank and
smooth surfaces facilitate the tiresome cleaning
duties.
Art.-No. 1024/B-CR/10"
%%%
Size
Order.-No.
Total length
Length of cut
Weight
10”
1024.108.260
26 cm
10 cm
361 g
ROBUSO*** Cutters' Heavy-Duty Shears
for use with saturated laminate fabrics
Art.-No. 1026/B-CR/9.5"
Regrinding Service:
Your Laminating and Mould-Making Shears are,
reworked, reserrated and refinished by our
Regrinding Services.
12
C60
%%%
Size
Order.-No.
Total length
Length of cut
Weight
9.5”
1026.108.250
25 cm
9.5 cm
230 g
ROBUSO*** Cutters' Shears - narrow-bladed
for use with saturated laminate fabrics
C60
Art.-No. 1150.045.000
KAI Rotary Blade Cutter
with 45 mm dia tungsten steel blade
for stencil-plate-aided cutting operations
See Chapter "Tools" for a detailed description.
TECHNICAL TEXTILES
ROBUSO ®-Mould-Making Scissors and Shears
Glass Fiber
All Scissors
and Shears
are microserrated.
All Scissors
and Shears:
bent-up blades
405/2/B-CR/6"
MACHINES
Carbon Fiber
1026/4/B-CR/8"
1249/4/E/6"
1026/2/B-CR/8"
ROBUSO
SOLINGEN
GERMANY
405 / 2 / 6”
CHROMED
ROBUSO
ROBUSO
SOLINGEN
GERMANY
1249 / 4 / 6”
SOLINGEN
GERMANY
1026 / 4 / 8”
CHROMED
ROBUSO
SOLINGEN
GERMANY
1026 / 2 / 8”
CHROMED
ROBUSO
TOOL ITEMS
SOLINGEN
GERMANY
1253 / 4 / 7”
CHROMED
Size
Order.-No.
6”
0405.208.160
%%%
16 cm
5 cm
60 g
Art.-No. 1026/4/B-CR/8"
%%%
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
8”
1026.408.210
21 cm
8 cm
166 g
6”
1249.407.160
16 cm
6 cm
38 g
ROBUSO*** Mould-Making Shears for use with glass,
carbon and saturated laminate fabrics
bent-up blades
hardened screw
bent-up blades and handles
%%%
Art.-No. 1253/4/B-CR/7"
C60
%%%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
8”
1026.208.210
21 cm
8 cm
166 g
7”
1253.408.185
18.5 cm
6.5 cm
111 g
bent-up blades
C60
%%%
Order.-No.
ROBUSO*** Mould-Making Scissors for use with lightweight glass, carbon and saturated laminate fabrics C60
Art.-No. 1026/2/B-CR/8"
Art.-No. 1249/4/E/6"
Size
ROBUSO*** Mould-Making Scissors, an extremely lightC60
weight model, especially for light cutting duties
with bent-up blades and offset handles,
completely nickel-plated, inner blades
precision-finish ground,
hardened screw,
ADVERTISING GIFTS
Art.-No. 405/2/B-CR/6"
1253/4/B-CR/7"
C60
bent-up blades and offset handles
13
ARS Scissors/Shears/Clippers
These are technological masterpieces introducing a further step into the
future of scissors and shears production.
They cut anything in the line of industrial high-tech fabrics, e.g. Kevlar®,
Twaron®, Dyneema®, PBO, etc. Their unusually high hardness rating provides for exceptional cutting efficiency and an equally long service life.
so.de
.robu
www
2112/H/4"
✦✦✦✦
Art.-No. 2110/H/10"
Size
Order.-No.
Total length
Length of cut
Weight
10”
2110.140.260
26 cm
9 cm
248 g
ARS Aramid Eater
C60
The blades of these High-Tech shears - Made in Japan are made of sintered "PM" specialty steel with a hardness
rating of 72 HRC.
The light-weight, cast aluminum handles are of absolute
hand-fit design and in perfect balance with the blades.
2110/H/10"
The contact pressure of the blades can be adapted by an
adjusting screw to the thickness of the material to be cut.
Both blades are micro-serrated.
Order.-No.
Total length
Length of cut
Weight
6”
2111.140.160
16 cm
3 cm
71 g
ARS Weavers' Scissors
C60
The blades of these scissors are made of sintered "PM"
specialty steel with a hardness rating of as much as
72 HRC. This is another High-Tech product designed for
excellent cutting performance at a minimum of physical
effort plus an extremely long service life.
The black plastic handles of these scissors, Made in Japan,
are generously dimensioned and produce, in combination
with the short blades a high leverage effect. The microserrated, round-tipped blades are OK for pocketing, i.e.
always ready to hand.
e
www.robuso.d
Size
www.robuso.de
✦✦✦✦
Art.-No. 2111/H/6"
2111/H/6"
Adjustable
Blade Contact
Pressure
✦✦✦✦
Art.-No. 2112/H/4"
Size
Order.-No.
Total length
Length of cut
Weight
4”
2112.140.105
10.5 cm
2.5 cm
42 g
ARS Weavers' Clippers - straight-bladed
C60
This is another High-Tech product Made in Japan.
The carbide metal blades have a hardness rating of
1700 HV and are micro-serrated. The red handle body is
made of a nylon/glass fiber composite bond.
2x
All Scissors
and Shears
are 2x microserrated.
Regrinding Service:
The above "A R S" products can be refinished
by our Regrinding Services.
14
Machines
Photo: NOVACOM GmbH, Aachen - www.novacomposites.de
MACHINES
Electro-Powered Heavy-Duty Shears
These electro-powered shears operate on the
principle of conventional hand shears in that
the cutting effect is produced by the up-anddown movement of the upper blade, the edge
of which is in constant contact with the edge
of the fixed lower blade.
The principle employed in these shears has
the advantage over rotary blade shears in that
there is no bare shaft for threads to catch and
wind up to eventually block the machine.
What's more, the operator has a clear view of
the cutting zone.
ING
NOIS
E
OPE
BA
NOW
R
Dyneema®
ED
3d
Glass Fiber
VEL
Aramide
Fabrics
AT
LE
R
These shears are designed to cut
multilayered Aramide, glass fiber
and other heavy-weight materials
without any problem whatever.
UCED BY
-
Clamping Base
2920.650.000
Shear Foot A
Designed to permit a two-handed grip of the material for full cutting control. May also
be mounted from below the bench top or on linear operating units for automatic sizing
cuts.
Shear Foot Type A
The overdimensioned blades and its
heavy-duty leverage design renders
it ideal for use with extremely dense
and tough materials. Maximum cutting
thickness is ca. 6 mm. The special
foot geometry design permits ready
cutting of narrow radius contours.
Shear Foot Type B
Excellent for use with voluminous woven
and knitted fabrics. Maximum cutting
thickness is ca. 15 mm.
The above Shear Foot Types are available in different
versions depending upon their blade finish.
16
These two Tables are designed to help you find out which Blade is best for your specific requirement:
For High-Tech Materials
Shear Foot Type
For Conventional Materials
Shear Foot Type
Aramide Fabrics and Knitteds
B80
Wire Screen Fabrics
A50
Aramide Felts
B81
Felt and Insulating Matting
B70
A41
Rubber
A40
Coconut Matting
B70
Aramide Composites
Dyneema®
B81/A51
Glass Fiber Fabrics
B60
Synthetic Resin Sheeting
Glass Fiber Fabrics - multilayered
B71
Pasteboards
A40/A50
Glass Fiber Matting
B60
PVC-Coatings/PVC-Sheeting
A40/B70
Glass Fiber Matting - multilayered
B71
Saddle Leather
A40
Laminate Fabrics
B81
Sailcloth and Tent Canvas
B70
Laminate Fabrics - cured
A51
A40
It is important to make sure that the selection of the right Shear Foot Type is, in fact, right for the material to be handled. If
in doubt, simply forward samples of your material to us so that we can find the best Blade combinations for you. All
blades can be reground and your machine can be repaired and overhauled by us.
TECHNICAL TEXTILES
Roller Base for Shear Foot Type B
The machine becomes part
of the Base and is ready to
'taxi' across what's to be
cut - just guide it along.
Spring-Loaded Overhead Suspender assy.
MACHINES
2920.600.000
TOOL ITEMS
2920.700.000
Shear Foot B
2920.241.000
2920.250.000
2920.251.000
2920.260.000
2920.270.000
2920.271.000
2920.280.000
2920.281.000
Complete with fixed lower Blade and Shear Foot Type:
A40 with narrow-edge ground upper blade
A41 with narrow-edge ground and serrated upper blade
A50 with standard upper blade
A51 with serrated upper blade
B60 with coated upper blade and acute cutting angle
B70 with naked upper blade
B71 with naked upper blade and serrated lower blade
B80 with coated upper blade
B81 with coated upper blade and serrated lower blade
Replacement Blades
Order No. Replacement Bl.
UPPER Blade A40
2920.160.000
LOWER Blade A40
2920.150.000
UPPER Blade A41
2920.165.000
LOWER Blade A41
2920.150.000
UPPER Blade A50
2920.140.000
LOWER Blade A50
2920.150.000
UPPER Blade A51
2920.145.000
LOWER Blade A51
2920.150.000
UPPER Blade B60
2920.170.000
LOWER Blade B60
2920.110.000
UPPER Blade B70
2920.120.000
LOWER Blade B70
2920.110.000
UPPER Blade B71
2920.120.000
LOWER Blade B71
2920.111.000
UPPER Blade B80
2920.100.000
LOWER Blade B80
2920.110.000
UPPER Blade B81
2920.100.000
LOWER Blade B81
2920.111.000
The weight of the machine is ca. 2 kg and
becomes virtually 'airborne' once hooked up the clamping collar/snap-hook combination
allows to work anywhere anytime.
Technical Data:
ADVERTISING GIFTS
Order No.
2920.240.000
Electro-Powered Shears
230 Volts AC Motor, 50 Hz, 170 Watts
all-insulated
radio-interference-suppressed
power connecting cable, 2 m long,
with grounded plug (Schuko-Type)
weight ca. 2 kg
17
MACHINES
HOOG's Compact Electro-Powered
Rotary Blade Shears
HOOG's Rotary Blade Products, Made in
Germany, are specifically designed for use in
trade and industry. They are comfortable in
handling and feature finger guard, safety
switch, grinding attachment and detachable
skid.
2950.000.000 Rapido
2950.050.000 Cutty
2950.150.000 Favorit-V
2950.100.000 Favorit
2950.000.000 Rapido
This is a 'light-and-quiet' Rotary Blade Shears
for use with light-weight fabrics, home textiles,
etc.
2950.050.000 Cutty
This is a budget-priced 'beginners' Model for light-duty
applications.
2950.100.000 Favorit
This is a compact Rotary Blade Shears of continuous-duty
design for use in trade and industry.
2950.150.000 Favorit-V
This is the heavy-duty version of the above "Favorit",
incorporating a high-efficiency motor-plus-gear combination, representing the most powerful Rotary Blade Shears
of the compacts class. Ideal for use with heavy-weight
materials, leather, upholstery cloths and in multilayer
cutting applications.
18
Technical Data
Type
Operating Voltage
Wattage
Blade dia Ø
Blade Speed
Cutting Thickness
Weight
Dimensions
Cutty
230 V
45 W
50 mm
2950 RPM
7 mm
0.67 kg
270 x 50 x 80 mm
Rapido
230 V
40 W
50 mm
1800 RPM
5 mm
0.54 kg
225 x 50 x 90 mm
Favorit
230 V
58 W
50 mm
2800 RPM
10 mm
0.80 kg
230 x 65 x 75 mm
Favorit-V
230 V
90 W
50 mm
3100 RPM
10 mm
0.80 kg
230 x 65 x 75 mm
Replacement Blades
Tool Steel WS Grade
High Speed Steel HSS Grade
Order No.
Order No.
Applications
Circular Blades
2950.550.000
2950.551.000
for stiff fabrics
'4-bow' Blades
2950.510.000
2950.511.000
for heavy-weight fabrics
'7-bow' Blades
2950.500.000
2950.501.000
for standard fabrics
'10-bow' Blades
2950.540.000
2950.541.000
for soft fabrics
For natural materials such as
wool, cotton, silk, leather
For synthetic fabrics such as
upholstery cloths, PVC, Nylon®
TECHNICAL TEXTILES
Truly the GIANT among the hand-guided Rotary
Blade Shears for heavy-duty applications,
especially for use with industrial textiles
and composites, carpeting material, felts,
synthetics, etc.
Made in Germany
2950.260.000 Herkules-V
MACHINES
HOOG’s Herkules
2950.200.000 Herkules-BW
2950.210.000 Herkules-RI
TOOL ITEMS
2950.216.000
2950.217.000
2950.200.000 Herkules-BW
2950.215.000
2950.217.000
Designed for use with garments and underwear, with
slim-line skid and spring-loaded shear foot. Ideal for use
in the garment and upholstery furniture industries to cut
thick material packages.
Edge Trimming Attachment RI for use with wall-towall carpeting along walls - works in both directions.
Guide Rail Attachment RI for straight 89 mm
width sizing cuts.
2950.216.000
Strip Cutting Attachment RI with infinetely variable width
adjustment from 15 to 100 mm - for skirting board
facings, etc.
Technical Data
Type
Voltage
Wattage
Blade -Ø
Blade Speed
Cutting Thickness
Weight
Dimensions
Herkules alle types
230 V
165 W
60 mm
1500 RPM
15 mm
1.15 kg
270 x 60 x 80 mm
Replacement Blades
2950.210.000 Herkules-RI
Designed for use by interior decorators and
furnishers. Without grinding attachment, with
'10-bow' rotary blade, spring-loaded shear
foot and a KLICK-skid for attaching accessories.
A special-design model for floor layers to cut
carpeting and PVC materials.
Tool Steel WS Grade
High Speed Steel HSS Grade
Order No.
Order No.
Applications
Circular Blades
2950.530.000
2950.531.000
for stiff fabrics
'4-bow' Blades
2950.520.000
2950.521.000
'10-bow' Blades
2950.560.000
2950.561.000
for soft fabrics
For natural materials such as
wool, cotton, jute, leather
For synthetic fabrics such as
upholstery cloths, PVC, Nylon®
ADVERTISING GIFTS
2950.260.000 Herkules-V
An upgraded version of the above, with slim-line
skid and 'fixed' shear foot to prevent jamming
of stiff material grades even when curves are cut.
The rotary blade is taken up in a spring-loaded
mount. Ideal for use with tough automotive industry
plastic materials, high-density felts and leather.
2950.215.000
19
MACHINES
HOOG’s Pneumatic Rotary Blade Shears
HOOG's Pneumatic Shears Products, Made in
Germany, are designed for maximum efficiency and service life at minimum servicing and
maintenance requirements. These robust units
are extremely light and comfortable to handle,
all model versions feature finger guards,
safety switches and grinding attachments.
Carbon Fiber
Operating Pressure: 6 bar
Air Consumption Rate: 220 l/min.
2950.152.000 Favorit-D
2950.271.000 Herkules-DV
2950.270.000 Herkules-D
2950.271.000 Herkules-D-V
2950.270.000 Herkules-D
2950.152.000 Favorit-D
This is the "pneumatics" version of Herkules-V:
Higher standby capacity, ON/OFF switch on top
or bottom, slim-line skid and 'fixed' shear foot
to prevent jamming of stiff material grades even
when curves are cut. The rotary blade is taken up
in a spring-loaded mount. Ideal for use with stiff
carbon fiber matting and other conductive or
saturated materials. Very popular for continuous
duty operations in the automotive industry handling
tough plastic materials. Absolutely safe for operation
in explosion hazard areas.
This is the "pneumatics" version of Herkules-BW:
Higher standy-by capacity, ON/OFF switch on top or
bottom, slim-line skid and spring-loaded shear foot.
Low-noise design. Works with all conventional textiles also suitable for use with carbon fiber and other conductive or saturated materials. Absolutely safe for operation in explosion hazard areas.
An extreme light-weight "pneumatic" Rotary Blade
Shears with unsurpassed efficiency characteristics.
Low-noise design, ON/OFF switch on top or bottom.
Ideal for use with plastics, metal-coated and
abrasive materials.
Technical Data
Type
Pneumatic
Wattage
Blade-Ø
Blade Speed
CuttingThickness
Weight
Dimensions
Favorit-D
6 bar
185 W
50 mm
4400 RPM
10 mm
0.80 kg
245 x 60 x 80 mm
Herkules-D and D-V
6 bar
185 W
60 mm
1550 RPM
15 mm
0.85 kg
270 x 60 x 90 mm
Replacement Blades: See HOOG's Compact Electro-Powered Rotary Blade Shears and Herkules
Battery-Powered Universal Rotary Blade Shears
2950.160.000 Rotary Blade Shears
2950.160.000 Battery-Powered Rotary Blade Shears
Technical Data
Type
Rechargeable Battery
Blade-Ø
Blade Speed
Cutting Thickness
Weight
Dimensions
9.6 V
60 mm
1200 RPM
12 mm
1.20 kg
295 x 60 x 80 mm
Battery
Order No. for Replacement Parts
2950.161.000
Rechargeable Battery for Universal Shears
2950.565.000
'10-bow' Blade made of HSS Grade Steel for Universal Shears (HSS = High Speed Steel)
20
Working away from any power outlet means unrestricted
operational freedom. That's why our supply programme
includes this imported article at an extremely favourable
cost-benefit price. This appliance is also featuring a
KLICK-skid for attachment of the same accessories as
is the case with Herkules-RI. Suitable for use with
fabrics, fleece, carpeting, floor coverings, etc. Supplied
with quick-charger (230 Volts) and one (only) rechargeable battery.
TECHNICAL TEXTILES
HOOG’s Electro-Powered Rotary Blade Shears - large dias
These Model Versions use large dia rotary
blades (i.e. 110 + 130 mm) and are designed
for production operations involving materials
with thicknesses of up to 50 mm.
The integrated roller base provides for comfortable handling. Complete with finger guard
and grinding attachment.
Made in Germany
TOOL ITEMS
MACHINES
2950.283.000 USM-G-MV
2950.284.000 X-130-MV-L
2950.282.000 USM-G
With a mere 2.5 kg in weight and 260 Watts rating,
it is the smallest 'light yet powerful' version, likely
to be the worldwide champion of its class. For use
with all textile standard products, cutting thickness
20-30 mm.
A normal design version with high-speed motor. With
7.9 kg in weight and a 400 Watts/380 Volts three-phase
AC motor probably the most powerful Rotary Blade
Shears on the market. For use with all textile standard
products, cutting thickness 40-50 mm.
Type
Voltage
Wattage
Blade-Ø
Blade Speed
Cutting Thickness
Weight
Dimensions
USM-G
230 V
260 W
110 mm
820 RPM
20-30 mm
2.5 kg
31 x 11 x 25 cm
USM-G-MV
230 V
260 W
110 mm
820 RPM
20-30 mm
2.5 kg
31 x 14 x 25 cm
X-130-N-S
380 V
400 W
130 mm
530 RPM
40-50 mm
7.9 kg
40 x 17 x 32 cm
X-130-MV-L
380 V
400 W
130 mm
280 RPM
40-50 mm
7.9 kg
40 x 14 x 32 cm
Replacement Blades
2950.284.000 X-130-MV-L
With centered blade guide for maximum control - no chance
for material to get entangled, steel-bronze reinforced gear
system, thrust-bearings and '4-bow' rotary blade of HSS
high speed steel grade. The slow-speed motor provides the
rotary blade with an extra boost of power. This is a special
design for use with heavy-weight industrial textiles such as
Aramide composites, glass fiber fabrics, etc. and other
extremely stiff fabrics. Cutting thickness 40-50 mm.
Quality of steel
Quality of steel
Applications
WS 110 mm
HSS 110 mm
WS 130 mm
HSS 130 mm
Circular Blades
2950.556 .000
2950.555.000
2950.593.000
2950.592.000
'4-bow' Blades
2950.554.000
2950.553.000
2950.590.000
2950.591.000
for all fabrics
WS Grade: for natural
materials such as wool, cotton,
sisal, coco, leather
ADVERTISING GIFTS
2950.281.000 X-130-N-S
Technical Data
2950.283.000 USM-G-MV
Similar to Type USM-G above, but with centered blade
guide for optimum control when working with stiff
materials. Steel-bronze-reinforced gear system, thrust
bearings and '4-bow' rotary blade of HSS high speed
steel grade. For use with extremely stiff materials,
cutting thickness 20-30 mm.
HSS Grade: for synthetic
fabrics such as upholstery cloths,
PVC, Kevlar®, Twaron®
Looking for Cutting Solutions? Just let us have a sample of your materials.
21
MACHINES
ROBUSO ® System Components
These are designed to optimize your cutting
operations.
Your Cutting Operations are in need for:
3 optimization
3 mechanization
3 rationalization
3 automation
May we offer our assistance and services. After
all, we have been in the cutting technology business ever since 1919 and have contributed a
great many problem solutions. We might even
come up with a complete planning concept for the
system components to streamline your operations:
3
3
3
3
selection of materials
cutting edge geometry designs
drive systems
automation and system integration
We are also streamlining existing systems.
Your inquiries are welcome.
Pneumatic Shears with
active upper blade
Electro-powered Shears
on Linear Operating Unit
Pneumatic Shears with
both blades active
22
TECHNICAL TEXTILES
HSGM Hot-Melt Cutting
HSGM Industrial equipment designed
for use with tapes, cords and fabrics
made of meltable synthetic fibers.
Made in Germany
light: 450 g
powerful: 120 W
MACHINES
2940.030.000 HSG-O electronic
with Pointed Cutting Loop R-50
2940.550.000
Cutting Foot for HSG-0
2940.561.000 Pointed
Cutting Loop RU
2940.510.000 Pointed
Cutting Loop HSO-N
2940.010.000 HSG-O with
Pointed Cutting Loop R
This is the logical onward development of Model HSG-O.
Modern electronic technology has reduced the weight by
50% and doubled the heat rating - all in favour of even
swifter working cycles. Once having had the opportunity
to use the HSG-O electronic, it will not be given up in
favour of anything similar. Ideal for use with cords and
tapes with thicknesses of 2 cm and above - also good for
use with synthetic fiber products such as curtain material,
etc.
HSG-03 VW for Continuous Operation
2940.100 HSG-MK VW
Order No.
2940.200.000
with 2 m long power cord (without cutting loops)
2940.210.000
with 3 m long power cord (without cutting loops)
2940.551.000
Cutting Foot SFW
Heat-cut appliance with transformer station for continuous
cutting and welding operations. The stand-by temperature
is adjustable to any desired degree so as to promote swift
working cycles. Complete with 2 m (optional 3 m) high-flex
power cord between transformer station and cutter handle.
Order No.
2940.020.000
HSG-O electronic (without cutting loop)
2940.501.000
Pointed Cutting Loop R-50
2940.561.000
Pointed Cutting Loop RU (dias 30 - 50 mm)*
(* Please state the exact outer dia!)
2940.010.000 HSG-O with Pointed Cutting Loop R
This is a budget-priced 'beginners' model version
for light duty use with cords and tapes up to a
maximum of 1 cm - also good for use with synthetic
fiber products such as curtain material, etc.
2940.100.000 HSG-MK VW for Continuous Operation
designed for curved and contoured cuts
Heavy-duty model with transformer station for continuous
and precise contoured cuts and welds involving synthetic
curtain materials and ornamentations. The adjustable temperature control permits working with extremely delicate
materials without the risk of melting-edge discolouration.
The needle-pointed cutting tip and the light-weight cutter
handle are ideal for precise and elaborate jobs right up to
and including filigree work.
(Supplied complete with Cutting Tip MK)
There is a wide range of cutting loops/tips for HSG-O,
HSG-O electronic and HSG-03 VW available - with
specials subject to specification.
2940.030.000 HSG-O electronic
with Pointed Cutting Loop R-50
TOOL ITEMS
2940.2… HSG-O3 VW
2940.000.000
HSG-O (without cutting loop)
2940.500.000
Pointed Cutting Loop R
2940.510.000
Pointed Cutting Loop HSO-N
2940.550.000
Cutting Foot SF
2940.120.000
Replacement Cutting Tip MK
2940.110.000
Replacement Cutter Handle MK
Other appliances and special-design models subject to
inquiry.
Technical Data:
Type
Voltage
Power Input
Working Cycle
Temperature Control
Cutting Thickness
Weight
HSG-O
230 V
60 W
short
Switch ON/OFF
10 mm
1.00 kg
HSG-O electronic
230 V
120 W
short
Switch ON/OFF
20 mm
0.45 kg
HSG-03 VW
230 V
250 W
continuous
stepless
40 mm
6.20 kg
HSG-MK VW
230 V
90 W
continuous
stepless
2 mm
5.20 kg
23
ADVERTISING GIFTS
Order No.
Order No.
MACHINES
EC Cutter – the NEW Battery-Powered Generation
Designed for effortless single-layer
cuts – Kevlar®, Twaron®, Dyneema®,
glass and carbon fiber materials
included.
This "EC" Cutter keeps up with high demands
and features:
3 a perfectly ergo-styled design for effortless,
non-fatiguing handling
3 carbide-edged blades for excellent cutting
performance
3 mains- and battery-powered operation
for unrestricted choice of working
environment
3 clear view of the cutting zone for
exact results
3 extreme light-weight body 220 g only
Light-Weight:
220 g only
Operates on
Mains and
Rechargeable
Battery
Ergo-styled
design
Carbide-Edged
Blades
2960.111.000 serrated
2960.110.000 unserrated
2960.131.000 serrated
2960.121.000 serrated
2960.141.000 serrated
2960.171.000
Rechargeable
Battery
2960.172.000
Charging
Station
2960.010.000: "EC" Cutter Set - unserrated
EC Cutter
Order No. for
Set made up of:
Component Parts
Order No. for
Set made up of:
Component Parts
2960.109.000
one Power-Drive Handle
2960.109.000
one Power-Drive Handle
2960.111.000
one Cutter Head, short-bladed for curve cuts - serrated
2960.110.000
one Cutter Head, short-bladed for curve cuts - serrated
2960.121.000
one Cutter Head plus Foot for straight cuts - serrated
2960.120.000
one Cutter Head plus Foot for straight cuts - serrated
Weight of "EC" Cutter - ready for use . . . . . . . . . . 220 g
"EC" Transformer Voltage . . . . . . . . . . . . . . . . . . . 230 V
110 V / 120 V also available
Rechargeable Battery Capacity . . . . . . . . . . . . . . . 2 h
Cutting Thickness - max. . . . . . . . . . . . . . . . . . . . 2 mm
2960.173.000
one Transformer
2960.173.000
one Transformer
2960.172.000
one Charging Station
2960.172.000
one Charging Station
2960.170.000
one Mains Connector
2960.170.000
one Mains Connector
2960.011.000: "EC" Cutter Set - serrated
C60
Other Cutter Heads, (not part of any Set):
Order No.
2960.171.000
one RECHARGEABLE Battery
Applications:
"EC" Cutter - serrated. Industrial and Synthetic Materials
such as: Aramid (Kevlar®, Twaron®), Dyneema®, Zylon®,
glass and carbon fabrics, curtain materials, upholstery
cloths, all synthetic fiber materials
24
2960.171.000
2960.130.000
without guide foot
2960.131.000
without guide foot - serrated
2960.140.000
ball-type
2960.141.000
ball-type - serrated
one RECHARGEABLE Battery
Applications:
"EC" Cutter - unserrated
Natural Materials, such as:
Cotton, wool, leather, rubber, tapestry, paper, wood
veneers
Shears for Traditional
Tailoring
Photo: City of Bonn Theater "Costumier's Shop"
ROBUSO ®-Tailor's Shears
in Master-crafted Quality
perfect in Function and
Efficiency
Classic Model Design
ROBUSO®-Tailor's Shears are expertly crafted,
forged from C 60 high carbon steel, hardened,
precision-finish ground, perfectly aligned and
assembled, thus featuring:
3 high-rate hardness (ca. 59 HRC)
3 interlocked screw
3 extreme ease of handling
3 uniform full-length cutting efficiency
3 excellent cutting characteristics
with thin and thick materials
3 long service life
Please note that carbon steel is not a member
of the stainless steel family, i.e. it tends to
corrode, i.e. to rust, but its cutting performance
exceeds that of stainless steel by far.
That's why we prefer to use carbon steel in
ROBUSO*** Shears in our efforts to provide
the tailoring industry with truly heavy-duty
products.
1020/C
1020/C/10”
ROBUSO
SOLINGEN
GERMANY
1020 / 10”
shown in
ORIGINAL
size
Sizes and Application Details:
7" medium-weight Sewing Scissors or light-weight
Tailor's Shears - for short-length cuts
ROBUSO
SOLINGEN
GERMANY
8" small-sized Tailor's Shears for cut-out work involving
light-weight fabrics - for short-length cuts
9" + 10" medium-sized professional Tailor's Shears for cutout work involving light- and medium-weight fabrics and
thin leather material. These are the most popular sizes.
11" + 12" large-sized Tailor's Shears for cut-out work
involving thick fabrics - for full-length cuts
13" + 14" "Jumbo"-sized Tailor's Shears - for extreme
full-length cuts
1020 / 10”
Art.-No. 1020/C
%%%
Size
Order.-No.
7”
1020.103.185
18.5 cm
8,0 cm
130 g
8”
1020.103.210
21.0 cm
9,0 cm
185 g
9”
1020.103.235
23.5 cm
10,5 cm
260 g
10”
1020.103.260
26.0 cm
12,5 cm
340 g
11”
1020.103.290
29.0 cm
13,5 cm
420 g
12”
1020.103.315
31.5 cm
15,0 cm
525 g
13”
1020.103.340
34.0 cm
16,5 cm
695 g
14”
1020.103.365
36.5 cm
18,0 cm
705 g
ROBUSO*** Tailor's Shears
C60
Blades mirror-ground inside and out with wine-red "Komfort" Handles
Model Selection Criterial:
Whatever make, model or size you may choose:
Remember that efficient shears and scissors cut by
simply moving your thumb up and down – without
applying any sideways pressure whatever.
We shall be happy to provide you samples of varying
sizes and qualities to enable you to test and decide at
your end which model is best suited to meet your
requirements.
The CLASSIC Model is available in the form of different
models and qualities:
26
ROBUSO "KOMFORT" HANDLES
NEW: ROBUSO Tailor's Shears
are now featuring "Komfort"
Handles = lacquer-finished
handles/eyes coloured wine-red,
padded with a transparent
plastic coat (polyurethane).
Benefits: Easy-grip quality
without any risk of blistering.
TECHNICAL TEXTILES
MACHINES
1020/DMR
1020/HQ/C
SOLINGEN
GERMANY
540226-10“
1020 / 10”
Holster
%%%
ROBUR** Tailor's Shears
%%
Size
Order.-No.
Total length
Length of cut
Weight
Art.-No.+ Size
7”
1020.106.185
18.5 cm
8.0 cm
130 g
540219-7"
1020.163.185
18.5 cm
8.0 cm
8”
1020.106.210
21.0 cm
9.0 cm
185 g
540221-8"
1020.163.210
21.0 cm
9.0 cm
9”
1020.106.235
23.5 cm
10.5 cm
260 g
540224-9"
1020.163.235
23.5 cm
10”
1020.106.260
26.0 cm
12.5 cm
340 g
540226-10"
1020.163.260
11”
1020.106.290
29.0 cm
13.5 cm
420 g
540228-11"
540231-12"
ROBUSO*** Tailor's Shears "MASTER ROBUSO"
Outer blades nickel-plated, inner blades mirrorground finish, with deep-etched and gold-lined
"MASTER ROBUSO" imprint, with wine-red
"Komfort" handles
Art.-No. 1020/HQ/C
%
Size
Order.-No.
Total length
Length of cut
Weight
135 g
7”
1020.153.185
18.5 cm
8.0 cm
115 g
190 g
8”
1020.153.210
21.0 cm
9.0 cm
230 g
10.5 cm
275 g
9”
1020.153.235
23.5 cm
10.5 cm
275 g
26.0 cm
12.5 cm
345 g
10”
1020.153.260
26.0 cm
12.5 cm
360 g
1020.163.290
29.0 cm
13.5 cm
415 g
11”
1020.153.290
29.0 cm
13.5 cm
400 g
1020.163.315
31.5 cm
15.0 cm
530 g
12”
1020.153.315
31.5 cm
15.0 cm
560 g
Order.-No.
C60
C60
Art.-No.+ Size
Order.-No.
PELLORO* Tailor's Shears
C60
Blades machine-ground, handles black lacquer finish
Ground blades, handles black lacquer-finish
%%
Holster
Size
Order.-No.
8”
3002.160.210
275 g
9”
3002.160.235
345 g
10”
3002.160.260
540321-8"
1020.164.210
21.0 cm
9.0 cm
190 g
540324-9"
1020.164.235
23.5 cm
10.5 cm
540326-10"
1020.164.260
26.0 cm
12.5 cm
540328-11"
1020.164.290
29.0 cm
13.5 cm
415 g
540331-12"
1020.164.315
31.5 cm
15.0 cm
530 g
Holster
leather - fits sizes 8", 9" and 10"
C60
ADVERTISING GIFTS
Art.-No. 1020/DMR
TOOL ITEMS
PELLORO
1020/HQ/10“
SOLINGEN
GERMANY
HIGH GRADE STEEL
SOLINGEN
MADE IN GERMANY
ROBUSO
540226
Inner and outer blades ground and chrome-plated for
corrosion and rust protection - recommended for use
wherever there is a risk of dampness, vapours and/or
extreme hand sweat. Handles black lacquer finish.
27
ROBUSO ®-ELASTIC
the Tailor's Shears with built-in "Power Steering",
designed for "MAXIMIZED Ease of Handling"
All about the Internal Spring:
inner surfaces precision hollow-ground
and chrome-plated. With "Komfort"
handles.
1052/CR/10”
The fulcrum of these shears is leafspring-loaded to ensure that the joint
faces 'float', i.e. do not contact one
another, i.e. do not cause any internal
friction during the cutting process and
that the blades are constantly in preloaded edge-to-edge contact right down
into their tips. The outer blade surfaces
are nickel- and chrome-plated, and the
ROBUSO
SOLINGEN
GERMANY
shown in
original
size
1052 / 10”
CHROMED
ROBUSO-ELASTIC**** Tailor's Shears
feature:
3 extreme ease of handling and control
3 absence of undue physical effort due to
the "power steering" effect, i.e. the user
can concentrate on what is to be done
3 "Komfort" handles for absence of strain,
stress and blisters
3 corrosion and rust protection
ROBUSO ®-KOMFORT" HANDLES
NEW: ROBUSO-ELASTIC Tailor's
Shears are now featuring
"Komfort" Handles = lacquerfinished handles/eyes coloured
mottled wine-red/black, padded
with a transparent plastic coat
(polyurethane). Benefits: Easygrip quality without any risk of
blistering.
Art.-No. 1052/CR
%%%%
Size
Order.-No.
Total length
Length of cut
Weight
8”
1052.104.210
21.0 cm
9.0 cm
185 g
9”
1052.104.235
23.5 cm
10.5 cm
260 g
10”
1052.104.260
26.0 cm
12.5 cm
340 g
11”
1052.104.290
29.0 cm
13.5 cm
420 g
12”
1052.104.315
31.5 cm
15.0 cm
525 g
C60
Classic Tailor's Shears Model
without micro-serrated blades
Applications:
ROBUSO-ELASTIC*** Tailor's Shears with straight (i.e.
without any serrations) blade edges are ideal for use with
natural fibers, jersey and tricot fabrics, woollen and knitted
materials, thin leathers, furs and upholstery cloths.
The golden rule: The thicker the material, the larger the
size of the shears.
28
TECHNICAL TEXTILES
MICRO-SERRATED Blades:
1055/CR
challenge to any shears because they are
usually very plain, very hard and very tough.
ROBUSO-ELASTIC**** Tailor's Shears with
MACHINES
Synthetic fiber materials represent a great
1053/CR
micro-serrated blades master this challenge
in that their serrated blades grip the materi-
However, there is one point to be remembered: these hard and tough synthetic fibers
ROBUSO
SOLINGEN
GERMANY
ROBUSO
SOLINGEN
GERMANY
produce a higher wear effect on micro-
1055 / 9,5”
CHROMED
1053 / 10”
CHROMED
serrated blade edges than is the case with
plane blades. To counteract this inevitable
wear effect it is of greatest importance that
the maintenance and care routines, i.e.
al firmly and permit, thus, controlled cuts.
regular thorough cleaning, applying thin oil
films to the inner and outer blades, etc., are
strictly adhered to. This borne in mind, the
TOOL ITEMS
cutting efficiency and the overall service life
of the shears will be significantly extended.
Order.-No.
8”
1053.104.210
21.0 cm
9.0 cm
9”
1053.104.235
23.5 cm
10.5 cm
10”
1053.104.260
26.0 cm
12.5 cm
340 g
11”
1053.104.290
29.0 cm
13.5 cm
420 g
12”
1053.104.315
31.5 cm
15.0 cm
525 g
Art.-No. 1055/CR
%%%%
Size
Order.-No.
185 g
8”
1055.104.210
21.0 cm
8.0 cm
170 g
260 g
9.5”
1055.104.250
25.0 cm
9.5 cm
230 g
ROBUSO-ELASTIC*** Tailor's Shears
ROBUSO-ELASTIC*** Tailor's Shears
%%%%
Size
C60
Tailor's Shears with narrow, point-tipped
blades and with one serrated blade edge
C60
Classic Tailor's Shears Model with one micro-serrated
blade
Applications:
Cutting and making-up of plain synthetic fiber fabrics,
curtain and decorative fabrics, natural and artificial silk,
light-weight sailcloth, canvas and tarpaulin materials.
Advantages:
This model is excellent for controlled cuts because users
have full view of the path of cut. Three fingers are comfortably nested within the large "oblong" eye. Excellent
leverage and reduced physical effort due to the higher
location of the screw. This model version is lighter in
weight than the comparable "classic" model.
ADVERTISING GIFTS
Art.-No. 1053/CR
Applications:
For use anywhere professional controlled cutting and
making-up is required, namely the garment industry,
tailor's shops, interior decorators, etc.
29
ROBUSO ®-"MASTER"-crafted CUTTERS' Shears
In addition to our "classic" and ROBUSO-ELASTIC
Tailor's Shears, we also have a further number of
"Specials" on our Programme, featuring:
1025/C
1023/C
3 narrow blades
3 extra large handles
3 30% less weight
1030/C
ROBUSO-"KOMFORT" HANDLES
NEW: ROBUSO Cutters' Shears
are now featuring "Komfort"
Handles = lacquer-finished
handles/eyes coloured wine-red,
padded with a transparent
plastic coat (polyurethane).
Benefits: Easy-grip quality
without any risk of blistering.
ROBUSO
SOLINGEN
GERMANY
1025 / 9,5”
Art.-No. 1025/C
%%%
Size
Order.-No.
8”
1025.103.210
21.0 cm
8.0 cm
9.5”
1025.103.250
25.0 cm
9.5 cm
ROBUSO*** Cutters' Shears
SOLINGEN
GERMANY
Art.-No. 1023/C
%%%
Order.-No.
166 g
10”
1023.103.260
26.0 cm
10.0 cm
230 g
12.75”
1023.103.330
33.0 cm
13.0 cm
C60
Applications:
Controlled cutting and making-up of light- and mediumweight fabrics, upholstery cloths, leathers, tarpaulin and
canvas materials - also suitable for use with thin cardboard sheets.
ROBUSO
ROBUSO-"KOMFORT"
HANDLES
1023 / 10”
Size
A ROBUSO "Special Model" with narrow, point-tipped
blades, wine-red "Komfort" handles, large "oblong" threefingers eye, higher located screw for extra leverage and
cutting efficiency right down into the tips, inner and outer
blade surfaces precision-finish-ground.
30
ROBUSO
SOLINGEN
GERMANY
1030 / 10”
Art.-No. 1030/C
%%%
Size
Order.-No.
Total length
Length of cut
Weight
361 g
10”
1030.103.260
26.0 cm
11.5 cm
464 g
553 g
11”
1030.103.290
29.0 cm
13.5 cm
496 g
C60
A solid, so-called American "WISS" model, with pointed
blade tips and extra-large wine-red four-fingers "Komfort"
handles for excellent leverage to make forceful cuts.
Applications:
For use with heavy-weight fabrics, upholstery cloths, wadding, felt, tarpaulin and canvas materials, leather, carpeting material.
Exceptionally thick materials, such as felt, carpeting,
saddle leather, etc., are likely to pose problems, in which
case the cutting edges would have to be ground at a
sharper angle for improved cutting efficiency - please let
us have samples of such problem materials so that we
can advise you what to do.
C60
A solid, so-called American model with extra-large, black
lacquer-finished, handles, broad thumb rest, long, wide
and solid, precision-finish ground, heavy-duty blades.
Applications:
Full-length cutting work with heavy-weight fabrics,
upholstery materials, wadding, tarpaulin and canvas
materials.
TECHNICAL TEXTILES
Stainless Tailor's Shears
KAI and SWISSORS ® Shears
www.robuso.de
www.robuso.de
"KAI " Shears represent a highly interesting
development of a new generation of tailor's
shears Made in Japan:
2200/R
2203/R/9.5”
MACHINES
3 New: Stainless shears laser-cut in one piece
Result: Unbreakable handles
3 New: Hardness rating of the specialty
steel used is 59 HRC = high tenacity
Result: Exceptionally high cutting efficiency
3 New: Razor-sharp blade edges and
solid screw mount
Result: Exceptionally effortless cutting
performance - even with heavy-duty
fabrics
3 New: Ergonomically styled handles
enveloped in durable, easy-grip and
non-irritating plastic
Result: Extreme ease of handling even with king-size hands
3 New: A real "lightweight" among conventional
'heavyweight' tailor's shears
Result: Exceptionally smooth and
non-fatiguing handling
TOOL ITEMS
2090
www.robuso.de
Size
Order.-No.
Total length
Length of cut
Weight
9.5“
2203.113.250
25.0 cm
9.5 cm
200 g
KAI Tailor's Shears - slim-line Model
✦✦✦
Art.-No. 2200/R
Size
Order.-No.
Total length
Length of cut
Weight
8”
2200.113.210
21.0 cm
8.0 cm
200 g
9,5”
2200.113.250
25.0 cm
9.5 cm
220 g
10,5”
2200.113.275
28.0 cm
11.5 cm
260 g
11,5”
2200.113.300
30.0 cm
12.5 cm
315 g
KAI Tailor's Shears
Applications:
Recommended for use in upholstery and tailor's shops
and for sizing of carpeting, tarpaulin, canvas, felt and
other thick materials. The use of stainless steel components is ideal for work in environments with a high risk
of dampness, vapours and/or extreme hand sweat.
2090 / 2091
SWISSORS
✦✦✦
C60
are a patented Swiss invention incorporating a new and
novel four-bar linkage mechanism requiring less than
50% of physical effort. The lower half of these shears
glides absolutely horizontal across the table top whilst
the upper half is effortless moved up and down by the
user's thumb. Straight cuts through fabrics are readily
accomplished in that the material is hardly lifted off the
table top, let alone ruffling it. The coated blades feature a
high hardness rating plus cutting performance and are
readily replaced once dull or damaged.
The contact pressure of the blades can be adapted by an
adjusting screw to the material to be cut.
Applications:
SWISSORS Shears are very popular in the interior decorators line of trade where long fabric runs have to be cut.
The micro-serrated version of these shears is recommended for making-up delicate curtain fabrics.
SWISSORS-Shears without serration
✦✦✦
Order.-No.
Total length
Length of cut
Weight
2090.113.251
23.5 cm
9.0 cm
245 g
SWISSORS-Shears with serration
✦✦✦
Order.-No.
Total length
Length of cut
Weight
2090.113.250
23.5 cm
9.0 cm
245 g
1 (only) pair of Replacement Blades without serration
Order.-No.
Weight
2091.100.000
20 g
ADVERTISING GIFTS
✦✦✦
Art.-No. 2203/R/9.5”
Adjustable Blade Contact Pressure
1 (only) pair of Replacement Blades with serration
Order.-No.
Weight
2091.000.000
20 g
31
Light-Weight Tailor's Shears
1027/CR/9”
2100/CR/10”
2025/R/9”
MicroSerrated:
2026/R/9”
Adjustable
Blade Contact
Pressure
www.robuso.de
1001/E
ROBUSO
SOLINGEN
GERMANY
1027 / 9”
CHROMED
1010/E
ROBUSO
SOLINGEN
GERMANY
1001 / 6”
Stainless ROBUSO*** Shears:
our response to the flood of socalled shears with plastic handles:
ROBUSO
SOLINGEN
GERMANY
1010 / 7”
MicroSerrated:
2101/CR/10”
Art.-No. 2025/R/9” unserrated blades
Size
Order.-No.
9”
2025.113.235
%%%
Art.-No. 1010/E
23.5 cm
8.5 cm
Light-Weight ROBUSO*** Tailor's Shears
131 g
C60
for use with light-weight natural fiber, fabrics and in corrosion hazard locations
Art.-No. 2026/R/9” micro-serrated
%%%
Size
Order.-No.
7”
1010.107.185
18.5 cm
7.0 cm
100 g
8”
1010.107.210
21.0 cm
8.7 cm
130 g
9”
1010.107.235
23.5 cm
9.8 cm
161 g
10”
1010.107.260
26.0 cm
11.5 cm
222 g
C60
Light-weight ROBUSO*** Tailor's or Dressmaker's Scissors
✦✦✦
Art.-No. 2100/CR/10” unserrated
Size
Order.-No.
Total length
Length of cut
Weight
10”
2100.104.260
26 cm
10 cm
240 g
ARS-Tailor's Shears Made in Japan
C60
✦✦✦
Art.-No. 2101/CR/10” micro-serrated
Size
Order.-No.
Total length
Length of cut
Weight
10”
2101.104.260
26 cm
10 cm
240 g
%%%
Size
Order.-No.
Total length
Length of cut
Weight
9”
2026.113.235
23.5 cm
8.5 cm
131 g
Light-Weight ROBUSO*** Tailor's Shears
C60
with one micro-serrated blade - for use with curtain
fabrics, light-weight lining material, thin fiber fabrics and
in corrosion hazard locations
3 solid, reinforced blades made of high-grade stainless
specialty steel
3 precision hollow-ground finish
3 heavy-duty fulcrum with spring-loaded lock nut for
maximum full-length blade edge-to-edge contact
3 perfect ergonomically styled handle design with nonirritating, easy-grip coating
Applications:
A true alternative whenever forged shears are too heavy
for the job in hand. Ideal for use in corrosion hazard environments, i.e. high atmospheric humidity, and wet hands.
with acutely angled handles to run the lower blade along
the table top for extra horizontal control. Completely nickelplated, inner blades precision-finish ground
Applications:
Hard sewing room duties, cut-out work in the studio and/or
wherever light-weight scissors are the one and only
answer.
Art.-No. 1001/E
%%%
Size
Order.-No.
Total length
Length of cut
6”
1001.107.160
16.0 cm
6.0 cm
83 g
8”
1001.107.210
21.0 cm
9.0 cm
133 g
Weight
C60
Light-weight ROBUSO*** Tailor's or Dressmaker's Scissors
ARS-Tailor's Shears Made in Japan
C60
with solid aluminium handles and screw-mounted, forged,
ground and chrome-plated blades - corrosion-protected
and regrindable
The contact pressure of the blades can be adapted by
an adjusting screw to the material to be cut.
Applications:
Use in tailor's shops and in the interior decorators trade.
Unserrated version for use with natural fiber and jersey
fabrics, leather.
Serrated version for use with all plain synthetic fiber fabrics.
Art.-No. 1027/CR/9”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
9”
1027.104.235
23.5 cm
8.5 cm
141 g
also referred to as "straight trimmers" - compact sewing
room scissors, completely nickel-plated, inner blades
precision-finish ground
Light-weight ROBUSO*** Tailor's Shears
Applications:
Hard sewing room duties and cut-out work in the studio.
with plastic handles, forged, ground and
chrome-plated blades
C60
Applications:
Hard sewing room duties, cut-out work in the studio and/or
wherever light-weight shears with forged blades are required.
Chrome-plated shears are corrosion-protected.
32
with the result that these Lefties Only shears
clamp the material between the blades
instead of cutting. Remember: Good things
take time - after which you will love our lefthanders scissors and shears.
MACHINES
1048/CR
www.robuso.de
2221/R/8”
540…
SOLINGEN
GERMANY
1040/C
540421-8“
MicroSerrated:
1049/CR
1012/E/7”
ROBUSO
HIGH GRADE STEEL
SOLINGEN
MADE IN GERMANY
ROBUSO
SOLINGEN
GERMANY
1040 / 8”
SOLINGEN
GERMANY
1048 / 8”
"Komfort"
handles
Art.-No. 1012/E/7”
"Komfort"
handles
%%%
Art.-No. 1040/C
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
7”
1012.107.185
18.2 cm
7.8 cm
109 g
8”
1040.103.210
21.0 cm
9.0 cm
10”
1040.103.260
26.0 cm
10.5 cm
Light-weight ROBUSO*** Dressmaker's Scissors
C60
This is our one and only "semi-left-handers" model
designed for use by left-handers, i.e. handles fit perfectly
into the left hand, whereas the blade configuration is that
of any conventional model. Completely nickel-plated with
inner blade surfaces of precision-finish ground.
Applications:
Hard sewing room duties and cut-out work in the studio.
✦✦
Art.-No. 2221/R/8”
Size
Order.-No.
Total length
Length of cut
Weight
8”
2221.113.210
20.5 cm
7.3 cm
113 g
Light-weight KAI left-handers' Scissors
%%%
Art.-No. 540426-10”
Total length
Length of cut
Weight
191 g
8”
1048.104.210
21.0 cm
9.0 cm
191 g
340 g
10”
1048.104.260
26.0 cm
10.5 cm
340 g
ROBUSO****-ELASTIC-Tailor's Shears with internal spring C60
C60
%%
Size
Order.-No.
Total length
Length of cut
Weight
8”
1040.163.210
21.0 cm
9.0 cm
191 g
1040.163.260
26.0 cm
10.5 cm
ROBUR** Tailor's Shears for left-handers
%%%%
Order.-No.
"Lefties only" = handles+blades in mirror-inverted configuration, precision-finish ground blades, wine-red
"Komfort" handles
Art.-No. 540421-8”
Art.-No. 1048/CR
Size
ROBUSO*** Tailor's Shears for left-handers
10”
TOOL ITEMS
ROBUSO
SOLINGEN
GERMANY
1012 / 7”
340 g
C60
"Lefties only" = handles+blades in mirror-inverted configuration, ground blades, blades, handles black lacquerfinish
"Lefties only" = handles+blades in mirror-inverted configuration, stainless steel blades, soft plastic-coated handles Applications:
with one 'four-fingers' eye
Art.-Nr. 1040, 540421, 540426 and 1048/CR
Applications:
For use with synthetic fiber fabrics, woollen and knitted
Light sewing room duties, cut-out work in the studio
materials, upholstery cloths, thin leathers, etc.
and/or wherever light-weight corrosion-protected scissors
are required.
Art.-Nr. 1049/CR
Plain synthetic fiber fabrics, silk, curtain fabrics,
decorative fabrics, etc.
"Lefties only" = handles+blades in mirror-inverted configuration
Outer blades nickel- and chrome-plated, inner blades
precision-finish ground and chrome-plated with mottled
wine-red/black "Komfort" handles, extreme ease of handling, corrosion-protected.
Art.-No. 1049/CR
%%%%
Size
Order.-No.
Total length
Length of cut
Weight
8”
1049.104.210
21.0 cm
9.0 cm
191 g
10”
1049.104.260
26.0 cm
10.5 cm
340 g
Left-handers having had to use 'conventional'
scissors or shears, are now required to refamiliarize themselves with these specials
because they are still likely to apply – subconsciously – counteracting blade pressure
ROBUSO****-ELASTIC-Tailor's Shears with internal spring C60
and one micro-serrated blade
"Lefties only" = handles+blades in mirror-inverted configuration
Outer blades nickel- and chrome-plated, inner blades
precision-finish ground and chrome-plated with mottled
wine-red/black "Komfort" handles, extreme ease of handling, corrosion-protected.
33
ADVERTISING GIFTS
ROBUSO-experience shows that left-handers
are especially grateful for the availability of
scissors and shears designed for their use.
These 'specials' fit perfectly into
their hands, are readily controlled
and require much less physical
effort than is the case with having
to use conventional designs.
TECHNICAL TEXTILES
Scissors and Shears for Left-Handers
PELLORO ® Pinking and Scalloping Shears
Even though we have initially described
PELLORO* as quality-controlled and modified
import products, we have awarded PELLORO
Pinking and Scalloping Shears with *** in
recognition of their excellent workmanship
finish and high hardness rating at ca. 58 HRC.
2082/R/8”
1061/CR/9”
5
5
7
1063/D/9”
www.robuso.de
2080/R/9”
1062/CR/9”
"Komfort"
Handles
"Komfort"
Handles
Art.-No. 1061/CR/9”
Size
Order.-No.
9”
1061.104.235
%%%
23.5 cm
7.0 cm
PELLORO*** Pinking Shears
255 g
C60
made of forged and hardened steel, with the hardness of
the pinking cut edges rating as high as 58 HRC, spacing
between teeth is 5 mm.
Blades chrome-plated and mirror-polished and regrindable
- with wine-red "Komfort" handles.
These shears are recommended for use with delicate
high-quality fabrics: wafer-thin curtain and decorative
material, fine silk, etc.
✦
Art.-No. 2080/R/9”
Size
Order.-No.
Total length
Length of cut
Weight
9”
2080.113.235
23.5 cm
6.5 cm
128 g
KAI Pinking Shears - stainless
C60
with teeth spaced at 5 mm - black plastic handles - an
interesting price alternative for "do-it-yourselvers".
34
Art.-No. 1063/D
%
Art.-No. 2082/R/8”
%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
7”
1063.105.185
19.5 cm
6.0 cm
194 g
8”
2082.113.210
22.5 cm
6.5 cm
131 g
9”
1063.105.235
23.5 cm
7.0 cm
270 g
10.5“
1063.105.275
29.0 cm
9.0 cm
395 g
PELLORO* Scalloping Shears - "stainless"
C60
with red plastic handles
PELLORO* Pinking Shears
C60
Applications:
Decorative wavy-cut edging of paper and leather materials. An interesting price alternative for "do-it-yourselvers".
Made of forged and hardened steel, outer blades
nickel-plated, hardness of the pinking cut edges
not quite as high as those of Art.-No. 1061/CR/9",
handles black lacquer-finish.
Size 7" = teeth spaced at 5 mm
Sizes 9" and 10.5" = teeth spaced at 7 mm
Art.-No. 1062/CR/9”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
9”
1062.103.235
23.5 cm
7.0 cm
250 g
PELLORO*** Scalloping Shears
Blades chrome-plated and mirror-polished,
with wine-red "Komfort" handles. Ideal for
scalloping thin leather (e.g. doll's shoes).
C60
Pinking shears are used to trim edges to prevent
fraying, whereas Scalloping shears are used to produce decorative edges, particularly when finishing
delicate leather material.
TECHNICAL TEXTILES
ROBUSO ® MASTER-crafted Sewing Scissors
250/C
250/E
120/E
110/E
120/HQ/E
MACHINES
250/HQ/E
ROBUSO
SOLINGEN
GERMANY
250 / 6”
ROBUSO
SOLINGEN
GERMANY
250 / 6”
ROBUSO
PELLORO
120/HQ/6“
"Komfort"
Handles
%%%
Art.-No. 120/HQ/E
%
Art.-No. 250/E
%%%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
4”
0110.107.105
10.4 cm
3.7 cm
27 g
4”
0120.157.105
10.4 cm
3.7 cm
27 g
6” 0250.107.160
15.7 cm
6.2 cm
64 g
4.5”
0110.107.120
11.7 cm
4.2 cm
33 g
5”
0120.157.130
13.0 cm
4.7 cm
41 g
6.5” 0250.107.170
17.0 cm
7.0 cm
81 g
5”
0110.107.130
13.0 cm
4.7 cm
40 g
6”
0120.157.160
15.5 cm
6.5 cm
62 g
7” 0250.107.185
18.3 cm
7.4 cm
95 g
5,5”
0110.107.145
14.2 cm
5.5 cm
51 g
8” 0250.107.210
20.7 cm
8.8 cm
114 g
6”
0110.107.160
15.5 cm
6.5 cm
65 g
9” 0250.107.235
23.3 cm
10.8 cm
142 g
6.5”
0110.107.170
16.6 cm
7.0 cm
69 g
7”
0110.107.185
18.2 cm
8.0 cm
77 g
8”
0110.107.210
20.8 cm
9.0 cm
109 g
with "identical" eyes, outer blades high-gloss, nickel-plated, inner blades precision-finish ground
Art.-No. 120/E
Size
Order.-No.
%%%
PELLORO* Quality Sewing Scissors
with "bevel-edge" eyes, outer blades nickel-plated,
inner blades precision-finish ground – an interesting
price alternative
Art.-No. 250/C
C60
%%%
Size
Order.-No.
6”
0250.103.160
15.7 cm
6.2 cm
70 g
7”
0250.103.185
18.3 cm
7.4 cm
99 g
0120.107.120
11.7 cm
4.2 cm
31 g
5”
0120.107.130
13.0 cm
4.7 cm
46 g
5.5”
0120.107.145
14.2 cm
5.5 cm
52 g
6”
0120.107.160
15.5 cm
6.5 cm
56 g
ROBUSO*** Sewing Scissors in Master-crafted Quality
with "bevel edge" eyes for optimum finger-fit
comfort and improved cutting control - outer
blades high-gloss nickel-plated, inner blades
precision-finish ground
with one large "oblong" eye, completely mirror-finish
nickel-plated, inner blades precision-finish ground, casehardened screw
4.5”
C60
Order.-No.
with one large "oblong" eye, blades precisionfinish ground, case-hardened screw, wine-red
"Komfort" handles - absence of nickel constituents
for allergy protection
Art.-No. 250/HQ/E
%
Size
Order.-No.
Total length
Length of cut
Weight
6”
0250.157.160
15.7 cm
6.2 cm
65 g
7”
0250.157.185
18.3 cm
7.4 cm
88 g
PELLORO* Quality Sewing Scissors
with one large "oblong" eye, outer blades
nickel-plated, ground inner blades an interesting price alternative
"Identical Eyes"
Scissors good for:
"Large Oblong Eye"
Scissors good for:
Thread trimming, undoing seams
and short-length cuts involving
single fabric layers also "fairly" good for use by
left-handers.
Heavy-duty use as sewing scissors, quilting
and/or light weight tailor's shears - the large
"oblong" eye offers room for two fingers to
apply increased cutting force for improved
control.
ADVERTISING GIFTS
Size
Art.-No. 110/E
TOOL ITEMS
PELLORO
250/HQ/6”
ROBUSO
SOLINGEN
GERMANY
110 / 6”
SOLINGEN
GERMANY
120 / 6”
35
ROBUSO ® Embroidery and Weavers' Scissors
401/E
403/E
406/E/4.5”
bent blades:
403/2/E
ROBUSO
ROBUSO
SOLINGEN
GERMANY
403 / 4”
SOLINGEN
GERMANY
401 / 4”
ROBUSO
SOLINGEN
GERMANY
406/4,5”
SOLINGEN
GERMANY
519010-4“
bent blades:
13/2/E
ROBUSO
ROBUSO
SOLINGEN
GERMANY
403 / 4”
SOLINGEN
GERMANY
13 / 4”
13/E
403/C/4”
519010-4”
"Komfort"
Handles
Art.-No. 13/E straight-bladed
%%%
Size
Order.-No.
Total length
Length of cut
Weight
3.5”
0013.107.090
9.0 cm
2.5 cm
14 g
4”
0013.107.105
9.8 cm
3.2 cm
16 g
ROBUSO*** Embroidery Scissors in Master-crafted Quality
with fine, straight needle-pointed blades, completely mirrorfinish nickel-plated, inner blades precision-finish ground
Applications:
Delicate needle, embroidery and Hardanger
work, undoing fine seams, trimming threads.
Art.-No. 13/2/E slightly bent-up blades
with straight long, thin, needle-pointed blades and large
handle eyes, inner blade surfaces precision-finish ground,
completely mirror-finish nickel-plated
Applications:
Delicate needle and embroidery work, undoing
seams and trimming of threads.
Art.-No. 403/C straight-bladed
Size
Order.-No.
Total length
Length of cut
Weight
3.5”
0013.207.090
9.0 cm
2.5 cm
14 g
4”
0013.207.105
9.8 cm
3.2 cm
16 g
with fine, slightly bent-up, needle-pointed blades, completely
mirror-finish nickel-plated, inner blades precision-finish
ground
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4”
0403.103.105
10.5 cm
3.4 cm
30 g
Applications:
Pinking out of delicate embroidery work or ornamentations, trimming threads at final inspections.
with straight solid, pointed and precision-finish ground
blades and wine-red "Komfort" handles - absence of
nickel constituents for allergy protection
Applications:
Typical scissors for trimming threads at weaving,
sewing and textile machines, and undoing seams.
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4”
0401.107.105
10.5 cm
3.2 cm
19 g
5”
0401.107.130
13.0 cm
4.7 cm
28 g
ROBUSO*** Embroidery and Weavers' Scissors
36
Order.-No.
Total length
Length of cut
Weight
4”
0403.167.105
10.5 cm
3.4 cm
28 g
with straight solid, pointed and ground blades, completely
nickel-plated
Recommendation:
A good medium-priced article.
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4”
0403.207.105
10.5 cm
3.2 cm
28 g
ROBUSO*** Weavers' Scissors in Master-crafted Quality
with slightly bent-up, solid, pointed and
precision-finish ground blades, completely
mirror-finish nickel-plated
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4”
0403.107.105
10.5 cm
3.4 cm
28 g
4.5”
0403.107.120
11.7 cm
4.0 cm
33 g
%%
Size
ROBUR** Weavers' Scissors
%%%
Art.-No. 519010-4” straight-bladed
blades, completely mirror-finish nickel-plated
Applications:
Typical scissors for trimming threads at weaving, sewing
and textile machines, and undoing seams.
Applications:
Trimming of corners, edges and borders,
curved and silhouette cuts, trimming of threads
at final inspections.
Art.-No. 406/E/4.5” straight-bladed
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
0406.107.120
11.6 cm
4.0 cm
28 g
with long, narrow blades - one blade pointed, the other
round-ended - inner blade surfaces precision-finish ground,
completely mirror-finish nickel-plated, with large handle eyes
offering room for muscular fingers
Applications:
For use anywhere pointed blades are risky.
TECHNICAL TEXTILES
TECHNISCHE
TEXTILIEN
ROBUSO ® MASTER-crafted UNIVERSAL Scissors
bent blades:
321/2/E/5”
323/E/4,75”
MACHINES
MASCHINEN
321/E/5”
ROBUSO
SOLINGEN
GERMANY
323 / 4,75”
ROBUSO
SOLINGEN
GERMANY
321 / 5”
SOLINGEN
GERMANY
520013-5“
bent blades:
614/2/E/5”
614/E/5”
520013-5”
ROBUSO
SOLINGEN
GERMANY
614 / 5”
This model is of truly "all-purpose" design and should
be present anywhere in the sewing rooms, tailor's
shops, interior decorators trade, in the textile, upholstery,
footwear and leather-working industries for short-length
cuts involving double fabric layers, for cutting tough
threads, tapes, rubber and elastic webs, leather, etc.
Order.-No.
5”
0321.107.130
%%%
13.3 cm
4.0 cm
56 g
ROBUSO*** Universal Scissors - small-sized
C60
The fulcrum point of the screw is located in the upper
half of the scissors for optimum leverage resulting
in high cutting efficiency right down into the tips.
Art.-No. 520013-5” straight-bladed
%%
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
5”
0321.167.130
13.3 cm
4.0 cm
56 g
5”
0614.107.130
13.0 cm
4.2 cm
48 g
ROBUR** Universal Scissors
with straight solid, pointed and ground blades, completely
nickel-plated
Applications:
Same as Art.-No. 321/E/5" - but not quite as sturdy, i.e.
for normal use.
Size
4.75”
Size
5”
Order.-No.
0321.207.130
%%%
Total length
Length of cut
Weight
13.3 cm
4.0 cm
56 g
ROBUSO*** Weavers' Scissors in Master-crafted Quality C60
with slightly bent-up, pointed and precision-finish ground
Applications:
Trimming of curves, corners and edges for final inspection.
%%%
Order.-No.
Art.-No. 323/E/4.75” straight-bladed
Art.-No. 321/2/E/5” slightly bent-up blades
Art.-No. 614/E/5” straight-bladed
Size
%%%
Order.-No.
Total length
Length of cut
Weight
0323.107.125
12.4 cm
3.0 cm
38 g
ROBUSO*** Weaver's + Pinch Scissors
with straight, precision-finish ground blades, completely
The fulcrum point of the screw is located in the upper half
of the scissors for optimum leverage resulting in high cutting efficiency right down into the tips.
Applications:
Short-length cuts involving tough materials, such as are
used in the interior furnishers trade, garment and textile,
footwear and leather-working industries.
ROBUSO*** Tape and Weaver's Scissors
C60
with straight, solid, precision-finish ground blades, completely mirror-finish nickel-plated, and "bevel edge" eyes
for optimum finger-fit comfort
Applications:
Forceful short-length cuts, strong threads, for use in
the interior furnishers trade, textile, upholstery furniture,
footwear and leather-working industries.
Art.-No. 614/2/E/5” slightly bent-up blades
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
0614.207.130
13.0 cm
4.2 cm
48 g
ROBUSO*** Tape and Weaver's Scissors
REPAIR
AND &SERVICING
REPARATUR
SERVICE
Size
C60
with slightly bent-up, solid, precision-finish ground blades,
completely mirror-finish nickel-plated, and "bevel edge"
eyes for optimum fingerfit comfort
Applications:
Trimming of curves, corners, edges and strong threads for
final inspection.
37
ADVERTISING
GIFTS
WERBEGESCHENKE
Art.-No. 321/E/5” straight-bladed
TOOL&ITEMS
ZUBEHÖR
WERKZEUG
Applications of 321/E/5”:
ROBUSO ® Master-crafted Quilting Shears
and Embroidery Scissors
1203/E
1201/E
bent blades:
1201/2/E
404/C/6”
1202/E
ROBUSO
SOLINGEN
GERMANY
1201 / 5”
bent blades:
1203/2/E
ROBUSO
SOLINGEN
GERMANY
1203 / 5”
ROBUSO
SOLINGEN
GERMANY
404 / 6”
bent blades:
1202/2/E
bent blades:
404/2/C/6”
ROBUSO
SOLINGEN
GERMANY
1202 / 5”
"Komfort"
handles
Art.-No. 404/C/6” straight-bladed
Size
Order.-No.
6”
0404.103.160
%%%
15.4 cm
5.0 cm
Art.-No. 404/2/C/6” slightly bent-up blades
Size
Order.-No.
6”
0404.203.160
60 g
%%%
15.4 cm
5.0 cm
60 g
ROBUSO*** Quilting Shears in Master-crafted Quality
Applications - straight-bladed version:
Multiple uses in the footwear, leather-working,
leather garment and rubber processing industries.
Applications - bent-up blades version:
Trimming of borders and edges
Art.-No. 1202/E straight blades
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
1202.107.130
12.9 cm
3.6 cm
43 g
5.5”
1202.107.145
14.4 cm
4.5 cm
46 g
Order.-No.
Total length
Length of cut
Weight
5”
1201.107.130
12.9 cm
3.6 cm
43 g
5.5”
1201.107.145
14.4 cm
4.5 cm
46 g
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
1201.207.130
12.9 cm
3.6 cm
43 g
5.5”
1201.207.145
14.4 cm
4.5 cm
46 g
ROBUSO*** Textile Scissors in Master-crafted Quality
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
1202.207.130
12.9 cm
3.6 cm
43 g
5.5”
1202.207.145
14.4 cm
4.5 cm
46 g
with long handles, straight pointed blades,
inner surfaces precision-finish ground,
Anywhere high full-length cutting efficiency
and controlled cuts are required, e.g.
Hardanger work, silhouette cuts, etc.
Controlled cutting of ornamentations and
silhouettes in the embroidery industry.
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
1203.107.130
12.9 cm
3.6 cm
43 g
5.5”
1203.107.145
14.4 cm
4.5 cm
46 g
%%%
Large ROBUSO*** Embroidery Scissors
Size
38
Useful as pocket scissors
Cutting of curves and edges in the footwear,
leather-working, leather garment and rubber
processing industries.
C60
with long, narrow, needle-pointed blades, with wine-red
"Komfort" handles - absence of nickel constituents for
allergy protection.
with long handles, straight blades with rounded
tips, inner surfaces precision-finish ground,
%%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
1203.207.130
12.9 cm
3.6 cm
43 g
5.5”
1203.207.145
14.4 cm
4.5 cm
46 g
Large ROBUSO*** Embroidery Scissors
with long handles, one blade pointed, the other
round-ended, inner surfaces precision-finish ground,
Anywhere delicate controlled cutting work is required.
Cutting of curves and trimming edges of embroideries,
ornamentations, silhouettes and anywhere pointed blades
are likely to ruin valuable materials.
Notes on "long-handled" Scissor Models:
The engineering design of these models provides for
positive leverage resulting in 'right down into the tips'
cutting efficiency. Another advantage is the low
'handle-to-material' position providing for accurately
controlled cuts - not necessarily a characteristic of
conventional scissors.
TECHNICAL TEXTILES
MACHINES
ROBUSO ® Master-crafted Paper
and Decorator's Scissors
508/E/4.5”
901/TFL/10”
ROBUSO
GERMANY
508/E/4,5”
901/E
901/3/TFL/10”
108/E
ROBUSO
SOLINGEN
GERMANY
901 / 10”
ROBUSO
ROBUSO
SOLINGEN
GERMANY
901 / 3 / 10”
SOLINGEN
GERMANY
901 / 10”
ROBUSO
TOOL ITEMS
SOLINGEN
GERMANY
108 / 6”
%%%
Art.-No. 901/E
%%%
Art.-No. 901/TFL/10”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
6”
0108.107.160
15.7 cm
6.8 cm
59 g
8”
0901.107.210
21.0 cm
10.0 cm
95 g
10”
0901.120.260
26 cm
13.2 cm
158 g
7”
0108.107.185
18.2 cm
8.0 cm
79 g
9”
0901.107.235
23.5 cm
11.7 cm
126 g
10”
0901.107.260
26.0 cm
13.2 cm
158 g
11”
0901.107.290
28.7 cm
15.5 cm
170 g
12”
0901.107.315
31.7 cm
17.5 cm
228 g
with long, narrow, pointed and precision-finish
ground blades, completely mirror-finish nickel-plated
Applications:
Paper and office scissors, pointed-blade
sewing scissors, long weaver's scissors.
Art.-No. 508/E/4.5”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
0508.107.120
11.8 cm
2.8 cm
19 g
ROBUSO*** Flat-Top Scissors in Master-crafted Quality
with long handles, sideways angled, thin, short
needle-pointed and precision-finish ground
Applications:
Delicate paperwork, cutting of film lengths,
photomontage and reproduction work. The angled
blade design provides for unproblematic handling
of photo-lab work.
ROBUSO*** Paper and Office Scissors
completely mirror-finish nickel-plated, inner
blade surfaces precision-finish ground
Applications:
Paper and office work, press cuttings, stamps, etc.
Here a point worth noting: Forged paper scissors are
already a rarety these days. Die-cut stainless scissors
with plastic handles have the upper hand instead:
So, treat yourself and your desk with a ROBUSO Mastercrafted quality product.
ROBUSO*** Decorator's Scissors in Master-crafted Quality
ROBUSO*** Paper and Office Scissors
teflon-coated inside and out for maximum corrosion
+rust prevention - with one micro-serrated blade,
absence of nickel constituents for allergy
protection
Applications:
Ideal for working with wall paper in dry or
gluey condition due to non-stick coating and
micro-serration - extremely easy to clean.
Art.-No. 901/3/TFL/10”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
10”
0901.320.260
26 cm
13.2 cm
158 g
ROBUSO*** Painter's and Decorator's Scissors
teflon-coated inside and out for maximum corrosion+rust
protection - with angled handles, absence of nickel constituents for allergy protection
Applications: Trimming of wall paper edges to fit floor
levels, corners and ceilings.
39
ADVERTISING GIFTS
Art.-No. 108/E
ROBUSO ® Master-crafted Thread Clippers - straight-bladed
These clippers are often referred to as ringfinger, nap, burling, palm, thread or cleaning
scissors.
The clippers are nested in the palm with the
ringfinger engaged in the eye - this leaves the
hand free for other work. Threads are simply
cut by pushing the upper blade down with the
thumb whilst the ringfinger holds the clippers,
which are spring-loaded to open automatically
after each cut is made. Snipping requires no
effort whatever. The screw is secured in position by a special lock nut.
Clippers with straight blades are used to cut
sewing machine threads whereas the ones
with curved blades are used to trim threads at
final inspections without the risk of damaging
the fabric.
260/E/4.5”
258/TFL/4.5”
ROBUSO
SOLINGEN
GERMANY
260/E/4,5”
510011-4.5”
258/E/4.5”
258/HQ/E/4.5”
PELLORO
258/ HQ
4,5”
SOLINGEN
GERMANY
5110011-4,5“
ROBUSO
SOLINGEN
GERMANY
258/TFL/4,5”
ROBUSO
SOLINGEN
GERMANY
258/ E/4,5”
straight-bladed
Art.-No. 258/E/4.5”
Size
Order.-No.
4.5”
0258.107.120
%%%
11.4 cm
3.2 cm
ROBUSO*** Master-crafted Quality
51 g
C60
blades precision-finish ground, completely mirror-finish
nickel-plated
Art.-No. 510011-4.5”
%%
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
0258.167.120
11.4 cm
3.2 cm
58 g
4.5”
0260.107.120
11.4 cm
3.2 cm
47 g
ROBUR** Quality
blades precision-finish ground, completely nickel-plated
This is a special model with rounded blade
tips to avoid damaged fabrics and trouser
pockets.
blades precision-finish ground, completely
%%%
Size
Order.-No.
4.5”
0258.157.120
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
0258.120.120
11.4 cm
3.2 cm
51 g
teflon-coated inside and out for maximum
corrosion+rust prevention - absence of nickel
constituents for allergy protection
40
%%%
Order.-No.
Art.-No. 258/HQ/E/4.5”
Art.-No. 258/TFL/4.5”
Art.-No. 260/E/4.5”
Size
%
11.4 cm
3.2 cm
75 g
PELLORO* Quality
C60
blades ground, completely nickel-plated - the screw is
taken up in a ball-bearing for extra ease of handling
C60
TECHNICAL TEXTILES
ROBUSO ® Master-crafted Thread Clippers curved blades
MACHINES
The curved blade versions are used to trim
threads at final inspections - curved blades
facilitate picking up of threads on a flat
stretch of fabric without accidentally causing
any damage.
259/HQ/E/4.5”
510111-4.5”
PELLORO
259 / HQ
4,5”
SOLINGEN
GERMANY
510111-4,5“
259/TFL/4.5”
TOOL ITEMS
259/E/4.5”
ROBUSO
SOLINGEN
GERMANY
259/TFL/4,5”
ROBUSO
curved blades
Size
Order.-No.
4.5”
0259.207.120
%%%
11.4 cm
3.2 cm
blades precision-finish ground, completely
51 g
C60
Art.-No. 259/TFL/4.5”
%%%
Art.-No. 510111-4.5”
%%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
0259.220.120
11.4 cm
3.2 cm
51 g
4.5”
0259.267.120
11.4 cm
3.2 cm
58 g
teflon-coated inside and out for maximum
corrosion+rust prevention - absence of nickel
constituents for allergy protection
C60
ROBUR** Quality
nickel-plated
%
Art.-No. 259/HQ/E/4.5”
Size
Order.-No.
4.5”
0259.257.120
11.4 cm
3.2 cm
75 g
PELLORO* Quality
blades ground, completely nickel-plated - the screw is
taken up in a ball-bearing for extra ease of handling
41
ADVERTISING GIFTS
Art.-No. 259/E/4.5”
SOLINGEN
GERMANY
259/E/4,5”
ROBUSO ® Master-crafted Pocket, Fabric and Textile Scissors
705/E/6”
253/E/7”
1205/E/5”
720/E
ROBUSO
1215/HQ/E/5”
SOLINGEN
GERMANY
1205/E/5”
ROBUSO
SOLINGEN
GERMANY
705/E/6”
ROBUSO
SOLINGEN
GERMANY
253/ E/7”
PELLORO
1215/ HQ
5”
ROBUSO
SOLINGEN
GERMANY
720/ 4”
Art.-No. 720/E
C60
%%%
Size
Order.-No.
3.5”
0720.107.090
9.0 cm
3.0 cm
20 g
4”
0720.107.105
10.5 cm
3.8 cm
23 g
4.5”
0720.107.120
11.5 cm
4.3 cm
30 g
5”
0720.107.130
13.0 cm
5.0 cm
42 g
6”
0720.107.160
15.7 cm
6.5 cm
56 g
ROBUSO*** Pocket Scissors in Master-crafted Quality
Applications:
Pocket-plus-fabric scissors for cutting small samples and
trimming of thread ends - always ready to hand whether
in pocket, coat or brief case.
%%%
Size
Order.-No.
Total length
Length of cut
Weight
7”
0253.107.185
18.2 cm
7.4 cm
103 g
ROBUSO*** Fabric Scissors in Master-crafted Quality
with one large "oblong" eye, round-tipped blades, precision-finish ground, completely mirror-finish nickel-plated
Applications:
For use with off-the-roll cloths, curtain material, decorative
fabrics, home textiles, etc.
The rounded tips glide across the material without any risk
of piercing.
42
%%%
Art.-No. 705/E/6”
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
5”
1205.107.130
12.9 cm
4.3 cm
38 g
6”
0705.107.160
ROBUSO*** Pocket-plus-Fabric Scissors
with slightly sideways-curved blades, rounded tips,
precision-finish ground, completely mirror-finish nickelplated
Art.-No. 1215/HQ/E/5”
Size
5”
Order.-No.
1215.157.120
C60
%%%
15.7 cm
6.3 cm
51 g
ROBUSO*** Fabric and Curtain Material Scissors
Applications:
Tuck-away type scissors for cutting fabric samples, etc.,
always 'on duty'.
with round-point blades, precision-finish
ground, completely mirror-finish nickel-plated
Art.-No. 253/E/7”
Art.-No. 1205/E/5”
%
Total length
Length of cut
Weight
12.9 cm
4.3 cm
43 g
PELLORO* Pocket-plus-Fabric Scissors
nickel-plated
Applications :
An interesting price alternative for less demanding uses.
with acutely sideways-curved blades, rounded tips,
precision-finish ground, completely mirror-finish
nickel-plated
Applications:
A typical scissors for use with off-the-roll curtain and light
decorative fabrics in home textiles departments.
Pocket-plus-Fabric Scissors as
advertising gifts:
These scissors are highly popular anywhere in the textiles,
home textiles and garment industries - and ideal advertising gifts for their sales representatives. It could be worth
your while to present your favourite customers with such
a high quality forged scissors and you will be remembered
for a long and rewarding business relationship. Have a
look at the advertising gifts Chapter of this Catalogue.
TECHNICAL TEXTILES
ROBUSO ® Upholsterer's, Carpeting and Pile Trimming Shears
MACHINES
1248/2/E/6”
1262/C
ROBUSO
SOLINGEN
GERMANY
ROBUSO
SOLINGEN
GERMANY
1262/8,5”
1271/3/PVC/6”
ROBUSO
SOLINGEN
GERMANY
1271/3/
PVC/6”
ROBUSO
%%%
Size
Order.-No.
Total length
Length of cut
Weight
6”
1260.102.160
16.0 cm
5.7 cm
85 g
7”
1260.102.185
18.5 cm
7.2 cm
120 g
8”
1260.102.210
21.0 cm
8.5 cm
170 g
ROBUSO*** Upholsterer's Shears
C60
with solid, wide, precision-finish ground blades,
large-size eyes and a 'screwed' joint
solid, precision-finish ground blades, one edge of which
is coarsely serrated
Applications:
Floor layers are using these shears with carpeting and
the footwear industry to cut upper leather material - the
high cutting efficiency of the solid blade edges copes
with anything tough to handle, such as saddle leathers,
coconut matting, rubber, heavy cardboard, etc.
Art.-No. 1248/2/E/6”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
6”
1248.207.160
16 cm
6 cm
38 g
Applications:
A classic upholsterer's shears - the blunt
blade tip serves to push any protruding material
into the seam.
ROBUSO*** Multi-Purpose Shears in Master-crafted Quality
Art.-No. 1262/C
with curved, precision-finish ground blades, completely
%%%
Size
Order.-No.
Total length
Length of cut
Weight
8.5”
1262.103.225
22.5 cm
6.0 cm
351 g
10.5 “
1262.103.275
27.5 cm
8.0 cm
590 g
ROBUSO*** Carpeting and Upper Leather Shears
C60
Applications:
For use as quilting or leather shears - designed to trim
borders and edges of floor covering and carpeting
materials as are used in automobile interior finishing
departments, in the upholstery trade, etc.
Art.-No. 1271/3/E/6”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
6”
1271.307.160
16 cm
4 cm
63 g
ROBUSO*** Pile Trimming Shears
with one narrow, pointed blade and one generously
'bulbed' blade to collect the trimmings, blades precisionfinish ground, completely mirror-finish nickel-plated,
goose-necked handles
%%%
Art.-No. 1271/3/PVC/6”
Size
Order.-No.
Total length
Length of cut
Weight
6”
1271.311.160
16 cm
4 cm
63 g
C60
ROBUSO*** Pile Trimming Shears
same as above, but with PVC-coated handles serving
as nickel-allergy protection
Applications:
Levelling the surfaces of carpeting, rugs, bath mats, etc.
with long black laquer-finished handles and extremely
43
ADVERTISING GIFTS
Art.-No. 1260/B
TOOL ITEMS
SOLINGEN
GERMANY
1260/7”
1248/2/
E/6”
1260/B
ROBUSO ® Floor Layer's,
Leather and Cardboard
Pattern Shears
1080/C/8.5”
ROBUSO ®-"KOMFORT" HANDLES
Handles coloured wine-red and padded with a
polyurethane coat. Benefits: Easy-grip quality
without any risk of blistering!
1080/D/8.5”
1080/3/C/8.5”
ROBUSO
SOLINGEN
GERMANY
1080/8,5”
1073/D/7.75”
ROBUSO
SOLINGEN
GERMANY
1080/3/8,5”
ROBUSO
SOLINGEN
GERMANY
ROBUSO
SOLINGEN
GERMANY
1080/8,5”
1073/7,75”
with large eye
with large eye
Art.-No. 1073/D/7.75”
Size
7.3/4”
Order.-No.
1073.105.200
%%%
20 cm
5 cm
208 g
ROBUSO*** Floor Layer's and Cardboard Pattern Shears
C60
with long, wine-red "Komfort" handles and short sturdy,
precision-finish ground blades, outer surfaces nickelplated, one blade micro-serrated, leaf spring-loaded
fulcrum
Applications:
An ideal all-purpose shears. Easy to handle, excellent
leverage for efficient cutting performance right down into
the tips, great for short-length cuts into thick material.
Controlled cutting of cardboard patterns, corners, edges
and borders of carpeting material.
Art.-No. 1080/C/8.5”
%%%
%%%
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
8.5”
1080.103.225
22.5 cm
6.5 cm
240 g
8.5”
1080.303.225
22.5 cm
6.5 cm
240 g
ROBUSO*** Leather and Carpeting Shears
C60
with precision-finish ground blades and wine-red "Komfort"
handles.
%%%
Art.-No. 1080/D/8.5”
Size
Order.-No.
8.5”
1080.105.225
22.5 cm
6.5 cm
ROBUSO*** Leather and Carpeting Shears
240 g
C60
with long wine-red "Komfort" handles having one large eye
for muscular fingers, blades precision-finish ground, outer
surfaces nickel-plated
Applications:
Positive leverage for forceful cutting of thick materials such
as leather, cardbord, rubber, carpeting, multi-layered
fabrics, etc.
44
Art.-No. 1080/3/C/8.5”
Size
ROBUSO*** Edge Trimming Shears
with bent handles to facilitate trimming of borders and
edges in upholstery shops and carpet-laying work
C60
TECHNICAL TEXTILES
ROBUSO ® Leather and
Cardboard Pattern Shears
1075/C/12”
1078/C/9.5”
MACHINES
1076/C/7”
1077/D/6.75”
ROBUSO
SOLINGEN
GERMANY
1078/7”
ROBUSO
SOLINGEN
GERMANY
1076/7”
ROBUSO
SOLINGEN
GERMANY
1077/6,75”
bent blades:
1076/2/C/7”
bent blades:
1077/2/D/6.75”
"Komfort"
Handles
6.75”
%%%
Art.-No. 1076/C/7” straight-bladed
Order.-No.
Total length
Length of cut
Weight
Size
1077.105.175
17.5 cm
3 cm
107 g
7”
ROBUSO*** Shears
C60
with long, wine-red "Komfort" handles and short
sturdy, precision-finish ground blades, outer
surfaces nickel-plated, one blade micro-serrated
Order.-No.
1076.103.185
%%%
Weight
Size
Order.-No.
Total length
Length of cut
Weight
18.5 cm
4.5 cm
87 g
12”
1075.103.315
31 cm
6 cm
563 g
ROBUSO*** Leather Shears
C60
Applications:
Positive leverage, ideal for leather-work and for use in
upholstery shops and with motor car interior panelling
items.
Art.-No. 1076/2/C/7” bent blades
Art.-No. 1077/2/D/6.75” bent blades
Size
6.75”
Order.-No.
1077.205.175
Total length
17.5 cm
Length of cut
3 cm
Order.-No.
Total length
Length of cut
Weight
Weight
7”
1076.203.185
18.5 cm
4.5 cm
87 g
ROBUSO*** Shears
C60
with long, wine-red "Komfort" handles and short sturdy,
precision-finish ground blades, outer surfaces nickelplated, one blade micro-serrated
Applications:
Delicate cut-out work, trimming of edges, borders, etc.
C75
with extra long handles and an extra large four-fingers
"oblong" eye for brute-force input - with short,
replaceable blades made of C75 high carbon
tool steel with a hardness rating exceeding 60 HRC
%%%
Size
ROBUSO*** Leather Shears
ROBUSO*** Cardboard and Plate Shears
Applications:
For use with thick cardboard panels, tarpaulin
and canvas materials, rubber tires, thin sheet
metal, etc.
%%%
107 g
%%%
Length of cut
with long, wine-red "Komfort" handles and narrow,
pointed, precision-finish ground and microserrated blades
Applications:
The short sturdy blades and the extra long handles make
this small model an ideal shears for use by goldsmiths,
fitter-mechanics and electronics technicians, etc. Also highly suitable for delicate pasteboard and leather cutting work.
Art.-No. 1075/C/12”
Total length
C60
Art.-No. 1078/C/9.5”
%%%
Size
Order.-No.
Total length
Length of cut
Weight
9.5”
1078.103.250
25.0 cm
4.5 cm
200 g
with long, wine-red "Komfort" handles and narrow,
pointed, precision-finish ground and micro-serrated blades
ROBUSO*** Stencil Plate Shears
Applications:
Positive leverage, ideal for leather-work and for use in
upholstery shops and in the automotive industry to trim
edges and irregularities in moulded parts.
with long, wine-red "Komfort" handles,
short precision-finish ground handles
Size
ADVERTISING GIFTS
Art.-No. 1077/D/6.75” straight-bladed
TOOL ITEMS
"Komfort"
Handles
"Komfort" Handles
Applications:
Positive leverage providing for forceful short-length
cuts in leather, felt, pasteboard, etc.
45
ROBUR ® Light-Weight Scissors and Shears with "Soft-Coat" Plastic Handles
These are light-weight scissors and shears
with stainless blades and unbreakable black
plastic handles, the inner surfaces of which
are padded with soft rubber inserts bonded
to the eyes. Handles of this configuration are
of firm-grip and hand-fit design for comfortable cutting performance.
Four fingers are comfortably nested within
the large "oblong" eye.
tapering off towards the edge for increased
blade stability and a thin cross section.
The blades are made of ice-chill-hardened
specialty steel, perfectly ground inside and
out, with a solid screw mount. Some models
feature a bevel-ground blade surface
2060/R/7.25”
2009/R/10”
SOLINGEN
GERMANY
2010/R/8“
SOLINGEN
GERMANY
2010/R/8”
2077/R/10”
Art.-No. 2010/R/8”
Size
Order.-No.
8”
2010.113.210
%%
21 cm
8 cm
10”
2010.113.260
%%
26 cm
ROBUR** Tailor's Shears - solid design
Applications:
Preferred as studio shears.
90 g
C60
Art.-No. 2010/R/10”
Order.-No.
Art.-No. 2009/R/10”
ROBUR** Tailor's Shears - light weight
Size
11.5 cm
193 g
C60
Size
Order.-No.
10”
2009.113.260
%%
26 cm
10 cm
ROBUR** Tailor's Shears - solid design
198 g
C60
Applications:
For use with anything from medium-weight fabrics to thin
carpeting material.
%%
Art.-No. 2077/R/10”
Size
Order.-No.
Total length
Length of cut
Weight
10”
2077.113.260
26 cm
12.5 cm
122 g
ROBUR** Paper Shears - stainless
Applications:
Preferably as decorator's shears.
46
SOLINGEN
GERMANY
2077/R/10“
2009/R/10“
SOLINGEN
GERMANY
2010/R/10“
2010/R/10”
C60
Art.-No. 2060/R/7.25”
Size
7.25”
%%
Order.-No.
Total length
Length of cut
Weight
2060.113.190
19 cm
4.2 cm
150 g
ROBUR** Hobbyists' Shears - stainless
with black plastic handles
C60
The safety blade lock is readily 'grip'-released and
engaged.
Applications:
Perfect for a great many uses: Textile industry - cutting of
fairly thick tapes and/or straps, electricians, plumbers,
do-it-yourselvers - cutting of coarse materials, thin wiring,
etc; gardeners - cutting of flowers, trimming of thin twigs.
TECHNICAL TEXTILES
Worn scissors and shears can be reworked.
The advantages of stainless scissors and
shears: Ideal for use in corrosion/rust hazard
locations, high atmospheric humidity, sea
climates, wet hands, etc.
MACHINES
2037/R/4.5”
2038/R/4.5”
2007/R/5”
2003/R/5”
2010/R
%%
Size
Order.-No.
5”
2010.113.130
13 cm
4.5 cm
35 g
6”
2010.113.160
16 cm
6.5 cm
41 g
ROBUR** Sewing Scissors
C60
Art.-No. 2003/R/5”
%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
2003.113.130
13 cm
4.5 cm
23 g
ROBUR** Embroidery Scissors
with long, needled-pointed blades
Art.-No. 2007/R/5”
%%
Art.-No. 2037/R/4.5”
%%
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
5”
2007.113.130
13 cm
4.5 cm
30 g
4.5”
2037.213.120
12 cm
3 cm
33 g
ROBUR** Pocket, Fabric and Textile Scissors
C60
with slightly sideways-curved blades,
rounded tips
ROBUR** Thread Clippers - curved blades
C60
Applications:
For trimming of threads at final inspections.
Applications:
Tuck-away type scissors for cutting fabric samples, curtain
materials, etc. Also a high-quality advertising gift popular
in the textile industry.
Art.-No. 2038/R/4.5”
Size
Order.-No.
4.5 ”
2038.113.120
%%
12 cm
3 cm
34 g
C60
ROBUR** Thread Clippers - straight-bladed
Art.-No. 2011/R/5”
C60
%%
Size
Order.-No.
Total length
Length of cut
Weight
5”
2011.113.130
13 cm
4.5 cm
35 g
ROBUR** Pocket-plus-Fabric Scissors
Applications:
For trimming of threads at textile machines
and final inspections.
C60
with rounded tips
47
ADVERTISING GIFTS
Art.-No. 2010/R
TOOL ITEMS
2011/R/5”
SOLINGEN
GERMANY
SOLINGEN
GERMANY
2007/R/5”
SOLINGEN
GERMANY
2003/R/5”
2010/R/5”
SOLINGEN
GERMANY
2011/R/5”
KAI Scissors and Shears
2222/R/8.5”
www.robuso.de
www.robuso.de
Why stainless scissors and shears from Japan, too?
Simply because the price-benefit ratio is more than just
convincing. Handles are made of solid rubber composites for
cutting work comfort - and of a size to transfer physical
effort into the blades right down to their points. The sturdy
blades are made of stainless steel with a counter-locked
screwed joint so as to be on 'industrial heavy-duty service'
throughout their working life.
2223/R/9”
2215/R
www.robuso.de
2220/R/8”
www.robuso.de
2210/R/4.5”
2210.113.000
✦
Art.-No. 2210/R/4.5”
Size
Order.-No.
Total length
Length of cut
Weight
4.5”
2210.113.120
12 cm
2 cm
40 g
KAI Thread Clippers - straight-bladed
C60
✦
Replacement Blades
Order.-No.
Total length
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
5”
2215.113.130
13.0 cm
5.0 cm
45 g
8.5 ”
2222.113.225
22.0 cm
8.0 cm
117 g
6.5”
2215.113.170
16.3 cm
6.5 cm
63 g
C60
✦✦
Art.-No. 2220/R/8”
KAI Tailor's Shears with one large "oblong" four-fingers
eye
✦✦
Art.-No. 2223/R/9”
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
2 cm
8g
8”
2220.113.210
21.0 cm
8.0 cm
112 g
9”
2223.113.235
23.0 cm
9.5 cm
130 g
2210.113.000
one (only) pair of replacement blades
C60
KAI Tailoring Shears
for dainty hands
48
✦✦
Art.-No. 2222/R/8.5”
Size
KAI Sewing Scissors
with replaceable blades
Size
✦✦
Art.-No. 2215/R
C60
KAI Tailor's (straight trimmers) Shears
C60
with acutely angled handles to run the lower blade along
the table top for extra horizontal control without material
lift-off
Tool Items
Photo: City of Bonn Theater "Costumier's Shop"
TOOL ITEMS
ROBUSO ®-Pattern Notchers and Check Markers
1130 / E / 1 x 8 mm
1130 / E / 2 x 8 mm
1130 / E / 5 x 6 mm
1139 / E / 115
1131 / 1.6 x 6 mm
1131 / 2 x 8 mm
1130 / HQ / E / 2 x 8 mm
ROBUSO Pattern Notchers
Art.-No. 1130 / E / 1 x 8 mm semicircular
Order.-No.
Total length
Weight
1130.018.000
11 cm
119 g
Order.-No.
Total length
Weight
1130.028.000
11 cm
119 g
Art.-No. 1130 / HQ / E / 2 x 8 mm semicircular
Order.-No.
Total length
Weight
1129.028.000
11 cm
119 g
These are made of Grade GTW 40 malleable cast iron,
with the clipping bed made of forged and hardened highgrade tool steel brazed onto the base. This makeup
ensures clearly defined notch marks for an indefinite
period of time. Two dowel pins are installed in the fulcrum
for extra stability.
The buffer spring between the handles provides for ease
of handling.
The surfaces of these notchers are nickel-plated,
the clipping beds are left unplated.
Economy Version of 1130/E/2 x 8 mm. Inside of handles
standard ground finish = an interesting price alternative!
Regrinding:
Art.-No. 1130 / E / 5 x 6 mm triangular
Regrinding is possible if and when required.
Order.-No.
Total length
Weight
1130.056.000
11 cm
119 g
applies to all four versions:
Small-sized 'palm-fit' notcher for
use with moderately thick materials
ROBUSO-Notchers are designed for identification
of cardboard patterns or the cut-out parts, also
to clearly mark distinctive characteristics.
Order.-No.
Total length
Weight
1131.166.000
15.5 cm
174 g
Total length
Weight
1131.028.000
15.5 cm
174 g
applies to these two versions:
Heavy-duty version with long handles
providing extra leverage for forceful cuts
50
Special Versions featuring:
Order.-No.
Order No.
Description
1139.115.102
2 mm round hole
1139.115.103
3 mm round hole
1139.115.001
square hole
1139.115.002
triangular hole
1139.115.083
heart
1139.115.086
star
1139.115.089
cloverleaf
1139.115.090
mushroom
1139.115.094
cross
Applications:
Applications:
Art.-No. 1131 / E / 1.6 x 6 mm semicircular
Art.-No. 1139 / E / 115
35 mm jaw depth
ROBUSO Check Markers are available
with the following symbol marks:
other dimensions can be produced but take anything
between 4 to 6 weeks to deliver.
ROBUSO Check Markers are designed to place
marks within a cut length of fabric, leather, paper,
etc.
TECHNICAL TEXTILES
Revolving Punch Pliers and Punches
1140.000.220
MACHINES
1142.006.000
1142.008.000
1144.5..000
1144.0...000
Total length
Weight
Order.-No.
Total length
Weight
Order.-No.
1140.100.250
25 cm
413 g
1142.006.000
25 cm
530 g
1144.001.000
Revolving Punch Pliers 'active leverage' design
with 6 turret-mounted punch tubes:
dia 2, 2.5, 3, 3.5, 4 and 4.5 mm
Heavy-Duty Punch Pliers
dia 1.5, 2, 2.5, 3, 3.5, and 4 mm
Made of high-tensile specialty steel, nickel-plated;
plastic-coated ergo-styled handles. Selected hole dias are
indicated in a window to prevent wrong dia size punching.
Turret head rotation is indicated by arrows on either side.
A detachable locking strap is provided at the handle ends.
Forged handles, turret made of industrial steel grade,
readily rotating and of safe-lock design. Punch tubes
special-process hardened and replaceable, so is the brass
anvil plate. Handle surfaces plastic-coated.
1140.000.220
Order.-No.
Total length
Weight
1140.000.220
22 cm
271 g
Revolving Punch Pliers
dia 2, 2.5, 3, 3.5, 4 and 4.5 mm
This is a light-weight version made of blanked sheet steel,
nickel-plated, with six case-hardened punch tubes. The
selected hole dias are indicated in a window to prevent
wrong dia size punching.
with 1 mm dia
1144.002.000
with 2 mm dia
etc.
and up to 25 mm in mm-increments
Belt Punches
Made of plain steel, stove-enamelled, finely polished
punch tube finish.
1144.5..000
Order.-No.
1144.501.000
The new 'active leverage' design reduces physical effort
to a minimum so that even thick and tough materials are
readily perforated without risking distorted handles.
Punching holes has never been easier.
TOOL ITEMS
1142.006.000
Order.-No.
1140.100.250
1144.0...000
1142.008.000
Order.-No.
Total length
Weight
1142.008.000
25 cm
540 g
with 1 mm dia
1144.502.000
with 2 mm dia
etc.
and up to 20 mm in mm-increments
Arch Punches
Heavy-Duty Punch Pliers
dia 1.5, 2, 2.5, 3, 3.5, 4 mm, 4.5 and 5 mm
Made of die-forged steel, stove-enamelled,
punch tube ground and polished.
Forged handles, turret made of industrial steel grade,
readily rotating and of safe-lock design. Punch tubes
special-process hardened and replaceable, so is the
brass anvil plate. Handle surfaces plastic-coated.
Specials:
Special design versions for use with Aramides, other sizes
and configurations subject to inquiry.
Applications:
These punch pliers are used with materials
such as leather, rubber, cardboard and anything
of similar nature.
51
ADVERTISING GIFTS
1140.100.250
TOOL ITEMS
Straight Threadline Cutters and
Rotary Blade Cutters
1150.145.000
1150.128.000
Adjustable Blade Contact
Pressure
Adjustable Blade
Contact Pressure
1150.160.000
1150.045.100
1150.028.000
1150.000.000
hard pressure applied.
1150.000.000
Order.-No.
Total length
Weight
1150.000.000
16 cm
34 g
ROBUSO-Straight Threadline Cutter
an intercompany invention.
This is a clever tool - incorporating a razor blade - designed
for straight threadline cuts, with the guide nose running
along the threadline of the fabric without ruffling it. An
absolutely clean cut is the result, especially with synthetic
textiles and fabrics woven with a straight threadline.
Order.-No.
Colour
Blade
Total length
Weight
1150.028.000
grey
28 mm
15.5 cm
35 g
1150.045.000
grey
45 mm
19.5 cm
87 g
1150.045.100
blue/black
45 mm
18.0 cm
92 g
1150.060.100
blue/black
60 mm
20.0 cm
111 g
KAI-Rotary Blade Cutter
incorporating a solidly mounted circular tungsten
steel blade remaining in cutting position even with
52
These are virtually indispensible for work with
rotary blade cutters because blade edges last
much longer. The mats are made of 1.5 mm
thick self-sealing plastic material.
The grey version is made up of a compact plastic
body.
The blue/black version features a perfectly
contoured ergo-style handle with rubber-like
firm-grip edge liner for forceful cutting operations.
The following dimensions are available:
1150.1…
Order.-No.
tungsten steel - plain edge
1150.128.000
1150.145.000
1150.0...
Cutting Mats for Rotary Blade Cutters
1150.160.000
2 Replacement Blades
1 Replacement Blade
1 Replacement Blade
Order.-No.
Dimensions
1150.061.000
15 x 46 cm
1150.062.000
45 x 60 cm
Dia
28 mm
45 mm
1150.063.000
60 x 90 cm
1150.064.000
60 x 143 cm
1150.065.000
100 x 200 cm
60 mm
Replacement Blades for Rotary Blade Cutters
Applications:
Cutting of contoured pieces from leather, fabrics,
paper, etc., ideal for work with multilayered glass
and carbon fiber material.
TECHNICAL TEXTILES
Seam Rippers, Tracing Wheels, Industrial Tweezers
2386/E/4.5"
1145.000.000
2386/E/4.5"
with needle
1166.000.000
MACHINES
2354/R/5.5"
1165.000.000
2382/R
2345/E/5.5"
1145.000.000
2442/R/5"
2382/E
Art.-No. 2330/E/5"
TOOL ITEMS
2330/E/5"
1146.000.000
Art.-No. 2382/R
Order.-No.
Weight
Order.-No.
Total length
Weight
Size
Order.-No.
Total length
Weight
1145.000.000
16 g
2330.107.130
12.5 cm
24 g
5"
2382.113.130
13.0 cm
15 g
5.5"
2382.113.145
14.5 cm
22 g
Tracing Wheel standard version
Multi-Purpose Tweezers
with plastic handle and die-cut wheel
with wide, rounded tips, nickel-plated
Thread Tweezers
stainless version with finer points
Art.-No. 2345/E/5.5"
Weight
1146.000.000
21 g
Order.-No.
Total length
Weight
2345.107.145
14.5 cm
20 g
Straight Multi-Purpose Tweezers
Tracing Wheel professional version
with pointed tips, pilot-pin, nickel-plated
with plastic handle and wheel tipped with 22 hardened
high-grade specialty steel needles
1165.000.000
Order.-No.
Weight
1165.000.000
7g
1166.000.000
Order.-No.
1166.000.000
Order.-No.
Total length
Weight
2354.113.145
14.0 cm
43 g
Weight
9g
Seam Ripper for undoing seams and button-holing
Order.-No.
Total length
Weight
2386.107.120
12 cm
23 g
4.5" with needle
2386.107.160
16 cm
25 g
straight, flat ends, nickel-plated
Art.-No. 2442/R/5"
Weaver's Tweezers
Order.-No.
Total length
Weight
2442.113.130
12.5 cm
17 g
Mechanic's Tweezers
Art.-No. 2382/E
Standard version - ball-pointed
Size
4.5" without needle
Thread Tweezers
Art.-No. 2354/R/5.5"
wide grip version, stainless steel
Seam Ripper for undoing seams and
button-holing
Art.-No. 2386/E
Order.-No.
Size
Order.-No.
Total length
Weight
4.5"
2382.107.120
11.5 cm
15 g
5"
2382.107.130
12.5 cm
17 g
5.5"
2382.107.145
14.5 cm
21 g
6"
2382.107.160
16.5 cm
24 g
8"
2382.107.210
21.0 cm
38 g
Model AA, stainless, heavy-duty points, compact design
ADVERTISING GIFTS
1146.000.000
Thread Tweezers
Utility version - ball-pointed
sideways bent, with pilot pin for sure grip, nickel-plated
53
TOOL ITEMS
Tailor's Chalk and Marking Pens
Drop-Action Pen, for
Chalk Refills 3.2 mm
1173.000.000
Classic
Tailor's Chalk
Tailor's Fat
Chalk Refills
Vanishing Mark
Pens
1173.110.000
1173.010.000
1173.210.000
1173.100.000
1173.300.000
1173.200.000
Vanishing Chalk
Tailor's Fat
Chalk
Classic Tailor's Chalk
Vanishing Chalk
Colour
Packaging Unit
Order.-No.
Visual Perception
Packaging Unit
Order.-No.
Colour
Packaging Unit
1170.000.000
white
100 pieces
1172.000.000
normal: ca. 1 - 2 days
50 pieces
1174.000.000
white
12 x 12 pieces
1170.001.000
white
25 pieces
1172.100.000
longlife: ca. 3- 5 days
50 pieces
1174.001.000
white
1170.100.000
red
100 pieces
1172.200.000
soft/extra longlife: ca. 5 - 6 days
50 pieces
1174.100.000
red
1170.101.000
red
25 pieces
1170.200.000
blue
100 pieces
1170.201.000
blue
25 pieces
1170.300.000
yellow
100 pieces
1170.301.000
yellow
25 pieces
1170.901.000
red/blue/yellow assorted
25 pieces
Classic Tailor's Chalk
Drawn lines can be brushed away.
Vanishing Chalk
The drawn line disappears in the course of
time - or 'at once' when being ironed.
Vanishing Chalk Holder
Colour
Packaging Unit
1171.000.000
white
100 pieces
1171.100.000
red
100 pieces
1171.200.000
blue
100 pieces
1171.300.000
yellow
100 pieces
1171.400.000
orange
100 pieces
1171.500.000
light-green
100 pieces
1171.510.000
dark-green
100 pieces
1171.600.000
black
100 pieces
Tailor's Fat Chalk
Very suitable for use with fabrics, leather
and smooth surfaces. Drawn lines are clearly
defined and very adherent.
1174.101.000
red
1174.200.000
dark-blue
1174.201.000
dark-blue
12 pieces
1174.210.000
light-blue
12 x 12 pieces
12 pieces
12 x 12 pieces
1174.211.000
light-blue
Packaging Unit
1174.300.000
yellow
1172.900.000
1 pieces
1174.301.000
yellow
12 pieces
1174.500.000
green
12 x 12 pieces
Order.-No.
Order.-No.
12 pieces
12 x 12 pieces
Order.-No.
Vanishing Mark Pens
Tailor's Fat Chalk
54
Tailor's Fat Chalk Refills
Order.-No.
Colour
Point
Packaging Unit
1173.000.000
white
1mm
10 pieces
1173.010.000
white
2mm
10 pieces
1173.100.000
violet
1mm
10 pieces
1173.110.000
violet
1mm*
10 pieces
1173.200.000
pink
1mm
10 pieces
1173.210.000
pink
1mm*
10 pieces
1mm
10 pieces
1173.300.000 violet/pink
* and with additional
Clearing Point
Vanishing Mark Pens (self-cancelling)
white markings: visible for about 2 - 4 days - or
vanishing 'at once' when being ironed.
violet markings: visible for about 2 - 14 days
pink markings: visible for about 10 - 20 hours
Caution: Do not iron or wash violet and pink markings
for as long as these colours are visible.
1174.501.000
green
1174.800.000
assorted colours
1174.801.000
assorted colours
1174.850.000
Samples - bagged
12 pieces
12 x 12 pieces
12 pieces
12 x 12 pieces
12 pieces
1 dozen - white
1 dozen - assorted colours
2 Drop-Action Pens, 3.2
mm, + 1 Refill Sharpener
Tailor's Fat Chalk Refills
These chalk refills mark a great many surfaces, such as
metal, plastic, wood, fabric, paper, etc. They are easy to use,
rigid, long-lasting and do not dry up.
The markings can be washed off - but we would recommend to run some tests before actually going to work.
Drop-Action Pen, 3.2 mm, for Chalk Refills
Order.-No.
Packaging Unit
1174.900.000
10 pieces
TECHNICAL TEXTILES
Drop-Action Pen, Fat
Chalk Refills, 3 mm
Fat Chalk
Refills
Silver Refills
Replacement
Felt Tips
MACHINES
Refill
Sharpener
Drop-Action Pen for Fat Chalk Refills, 3 mm
Order.-No.
Colour
Packaging Unit
Order.-No.
Packaging Unit
1175.000.000
white
12 x 12 pieces
1175.900.000
10 pieces
1175.001.000
white
12 pieces
1175.100.000
red
12 x 12 pieces
1175.101.000
red
12 pieces
blue
12 x 12 pieces
1175.201.000
blue
1175.300.000
yellow
12 x 12 pieces
1175.301.000
yellow
12 pieces
1175.500.000
green
12 pieces
12 x 12 pieces
1175.501.000
green
12 pieces
1175.600.000
black
12 x 12 pieces
1175.601.000
black
12 pieces
1175.700.000
violet
12 x 12 pieces
1175.701.000
violet
12 pieces
1175.800.000
UV-Refills
12 x 12 pieces
1175.801.000
UV-Refills
12 pieces
1175.850.000
Samples - bagged
1 dozen - white
1 dozen - assorted colours
2 Drop-Action Pens, 3mm,
+ 1 Refill Sharpener
Fat Chalk Refills
Very suitable for use with fabrics, leather and
smooth surfaces. Drawn lines are clearly defined
and very adherent - and can be readily removed
from smooth surfaces using spirit (prior tests
are essential in every case).
Order.-No.
Packaging Unit
1174.910.000
10 pieces
Pen supplied without fill
Sharpener for Tailor's and Fat Chalk Refills
Replacement Felt Tips
Silver Ballpoint Refills
Order.-No.
1176.000.000
Colour
Silber
Packaging Unit
10 pieces
Silver Ballpoint Refills
Order.-No.
Line Widths
1178.011.000
2 – 4 mm
1178.021.000
1 – 2 mm
1175.200.000
Refill Sharpener with Shavings Collection Receptable
This rechargeable pen is 10 to 12 times superior to conventional rechargeable felt-tip pens. A valve controls the
UV tincture flow. The felt tip can be replaced without any
problem.
Line widths are subject to the writing pressure,
i.e. light = thin, increased = thicker.
UV Tincture water-based - Refill Bottle
The silver marks are clearly visible on light as well as on
dark surfaces and suitable for use on leather, paper, cardboard, etc. These markings are problematic to remove and
it is, therefore and as a rule, recommended to apply silver
markings to the underside or where they disappear in
folds and seams.
Refill
Order.-No.
Packaging Unit
1176.010.000
100 pieces
Rechargeable UV Tincture Pen
Order.-No.
Line Widths
1178.010.000
2 – 4 mm
1178.020.000
1 – 2 mm
Order.-No.
Colour
1178.100.000
UV - blue
250 ml
1178.110.000
UV - blue
1000 ml
1178.200.000
UV - green
250 ml
1178.210.000
UV - green
1000 ml
Contents
Note: UV Marking Preparations
These are used for "invisible" marking of fabrics,
leather and other smooth surfaces, with the markings
becoming visible under UV light.
UV markings are highly problematic to remove even
though this is not necessary considering their
"invisible" nature. However, prior tests are recommended to be on the safe side.
Rechargeable UV Tincture Pen
55
ADVERTISING GIFTS
Fat Chalk Refills
TOOL ITEMS
UV Tincture
Pen
TOOL ITEMS
The "smart" Universal and Safety Cutters made by
KDS and KAI of Japan and MARTOR of Germany
1155.100.000
1155.010.000
1155.000.000
1155.010.000
1155.000.000
1155.100.000
Order.-No.
Weight
Order.-No.
Weight
Order.-No.
Weight
1155.000.000
160 g
1155.010.000
21 g
1155.100.000
96 g
KDS Automatic
KDS Slim Trim
KAI Cutter Handy
An innovative heavy-duty cutter, self-loading from
the integrated snap-off blade magazine holding
8 blades. Palm-fit, ergo-style handle for safe and
comfortable cutting operations.
The blade outlet features a lock-screw to freeze
the blade in position when performing forceful
cuts.
Cutter supplied with eight snap-off blades.
Slim-line, yet compact, stainless all-steel cutter using
extra-fine snap-off blades with pointed 30° edge.
Excellent for delicate cutting work with leather and
plastic materials.
The pocket clip serves as blade snapper.
This cutter features an extendable finger-loop to allow
the cutter dangling from a finger whilst preparing what's
to be cut next. What's more, this finger-loop provides
extra grippage for controlled force-cuts. The finger-loop
folds back into the handle when not needed. A blade
control slider with lock-screw adjusts the cutting depth.
The pocket clip serves as blade snapper.
Cutter supplied with ten replacement blades.
Cutter supplied with three snap-off blades.
56
TECHNICAL TEXTILES
Universal and Safety Cutters
1155.210.010
1155.201.010
MACHINES
1155.200.010
1155.20…
1155.110.000
1155.21…
Order.-No.
Weight
Order.-No.
Description
Weight
1155.110.000
21 g
1155.210.000
for draw-cut work
74 g
1155.211.000
for push-cut work
74 g
KAI Cutter Light
MARTOR OPTICUT
Small light-duty cutter - with blade snapper
inside the detachable pocket clip.
Cutter supplied with three snap-off blades.
1155.20…
Order.-No.
Description: for use by
Weight
1155.200.000
right-handers - with straight blade
85 g
1155.201.000
right-handers - with hook blade
85 g
1155.205.000
left-handers - with straight blade
85 g
1155.206.000
eft-handers - with hook blade
85 g
MARTOR PROFI
Compact Safety Cutter, aluminum body, spring-loaded blade
retract system designed to automatically respond to any uncontrolled move if and when the thumb-push slider is not in
forward position - let go of the slider when making the cut.
This safety cutter is designed to reduce cutting accidents to
the absolute minimum. Easy blade change - just slide the
blade mount insert back. Successfully tested by the German
Safety Control Board "TÜV". A left-handers version is also
available. Cutter supplied with one blade installed and ten
replacements.
"Push-cut" version: The material inlet faces in opposite
direction of the "pull-cut" version.
Successfully tested by the Germany Safety Control
Board "TÜV".
Cutter supplied with one blade installed and ten replacements
Ergo-styled Cutter for use with plastic sheeting and
foamed material. Compact design with Teflon®- coated
metal base. The material hold-down clip prevents
build-up ahead of the blade edge and keeps fingertips
"safely" away.
Blades for:
Type/Version
Order.-No.
Packaging Unit
Order.-No.
Packaging Unit
Blade Thickness
KDS Automatic
1155.000.032
32 pieces
1155.000.100
100 pieces
0.50 mm
KDS Slim Trim
1155.010.010
10 pieces
1155.010.100
100 pieces
0.38 mm
KAI Cutter Handy
1155.100.010
10 pieces
1155.100.100
100 pieces
0.50 mm
KAI Cutter Light
1155.110.010
10 pieces
1155.110.100
100 pieces
0.38 mm
MARTOR PROFI with straight blade
1155.200.010
10 pieces
1155.200.100
100 pieces
0.63 mm
MARTOR PROFI with hook blade
1155.201.010
10 pieces
1155.201.100
100 pieces
0.63 mm
MARTOR OPTICUT
1155.210.010
10 pieces
1155.210.100
100 pieces
0.40 mm
Further Cutter Models/Versions and Blades of the original manufacturers named in this Catalogue are
3 available upon demand.
57
ADVERTISING GIFTS
1155.110.000
TOOL ITEMS
1155.21…
Repair and Servicing
TECHNICAL TEXTILES
MACHINES
Our Regrinding Services:
Professional, thorough,
prompt and budget-priced
Craftsmen's Skill and Artistry
These illustrations show clearly how many
sequential operations are required to refinish
scissors and shears properly. We might add
that it calls for craftsmen's skill and artistry
indeed to grind, assemble and align these
precision-made components - all of them
tasks not to be trusted to the hands of a
street corner scissor grinder.
Handling and Return of Items sent in for
Regrinding
Our Regrinding Service Department is organized to deal with your requirements promptly
- even during vacation seasons and new year
periods. Regrinding operations are performed
during the first days of each week - this in an
effort to return your items by the end of such
week.
Maintenance and Care
Quality scissors and shears require due
attention to last for as long as possible.
Rough and tiresome cutting is not necessarily
an indication that regrinding is needed.
Do not, under any circumstances, attempt to
untighten the screw. Try cleaning and lubricating instead - it usually works wonders.
Failing that, it's time for a regrind service.
Services
Order No.
Description
1500.000....
Regrinding: ROBUSO Products / Refinishing
1501.000....
Regrinding: 'Outside' Products / Refinishing
1502. to 1504....
Other Commissioned Work
1506.000....
Repair of Electro-Powered Shears
1506.1…
Electro-Powered Shears: Grinding of Blades
1700.…
Etching and Embossing
See Price List for details
Any Special Requirements?
• Micro-Serrating of plain blade edges
• Micro-Serrating of carbide-tipped machine
blade edges
• Needle-point grinding of conventional blade
ends
• Rounding of conventional blade ends
• Shape-bending of shanks/handles
• PVC-coating of handles
• Adaptation of Shears for use with specific
material types and grades: e.g. adjustment
of the cutting edge geometry for use with
felt, leather and thicker materials, increase
or decrease of blade contact pressure,
increase of pressure right down into the
tips
• Teflon®-coating of shears (minimum
quantities subject to prior arrangement)
• Consecutive Numbering of shears (for better inventory control)
• Inscribing shears with company names
and/or logos (for intercompany identification or advertising purposes)
Anything else? Please let us know so that you can see what we can do.
59
Final Inspection
Clean-up and Packing
TOOL ITEMS
. Reassembling
. Aligning
. Edge Grinding
. Micro-Re-Serrating
Hollow Grinding
ADVERTISING GIFTS
Disassembling
lin
er
ll B
rfa
ue
Ma
89
19
Advertising Gifts
TECHNICAL TEXTILES
Danke für 25 Jahre
erfolgreiche Zusammenarbeit!
3 ROBUSO® Advertising Gift Products bearing your Company
Name and/or Logo will positively remind your customers of
you, your representatives and your products or vice with
gratitude, recognition and respect.
3 Moreover, gifts are not necessarily based on ulterior commercial motives, but can also be used to express personal
feelings involved with anniversaries, retirements, openings,
etc. In other words, quality gift scissors will always be
appreciated.
3 After all, it's the thought that counts.
1053/L/8”
MACHINES
ROBUSO ® Scissors and Shears
as the ideal Advertising Gifts
1055/L/9.5”
705/L/6”
ROBUSO
ROBUSO
SOLINGEN
GERMANY
1053/L /8”
ROBUSO
SOLINGEN
GERMANY
705/L /6”
ROBUSO
SOLINGEN
GERMANY
1205/L /5”
%%%
Art.-Nr. 1055/L/9.5”
%%%%
Tailor's Shears Presentation Case for sizes 11" and 12"
Size
Order.-No.
Total length
Length of cut
Weight
Size
Order.-No.
Total length
Length of cut
Weight
Order.-No.
5"
1205.109.130
12.9 cm
4.3 cm
38 g
9.5"
1055.109.250
25.0 cm
9.5 cm
230 g
Wooden Presentation Case,
ROBUSO*** Fabric Scissors
C60
gold-plated handles, outer blades nickel-plated,
inner blades precision-finish ground
Art.-Nr. 705/L/6”
C60
slim-line design, gold-plated handles, outer blades nickeland chrome-plated, inner blades precision-finish ground,
%%%
Size
Order.-No.
Total length
Length of cut
Weight
6"
0705.109.160
15.7 cm
6.3 cm
51 g
ROBUSO*** Fabric and Curtain Material Scissors
C60
gold-plated handles, outer blades nickel-plated,
inner blades precision-finish ground
Art.-Nr. 1053/L
%%%%
Size
Order.-No.
Total length
Length of cut
Weight
8”
1053.109.210
21.0 cm
9.0 cm
185 g
9”
1053.109.235
23.5 cm
10.5 cm
260 g
10”
1053.109.260
26.0 cm
12.5 cm
340 g
11”
1053.109.290
29.0 cm
13.5 cm
420 g
12”
1053.109.315
31.5 cm
15.0 cm
525 g
gold-plated handles, outer blades nickel- and chromeplated, inner blades precision-finish ground, one blade
micro-serrated
black paper outer cover - inside green velvet-lined
Protective Leather Cases
Order.-No.
Blade Inscription Details:
Your Company Name and/or Logo on an outer blade
surface may consist of:
A black surface etching (e.g. see top "COPOMAT") or a
coloured deep edge laser print (e.g. see top "WÜLFING"
or "PASSIGATTI").
All we need is your reproducible copy. Surface etchings
require an etching stencil and for deep edge laser prints
an EDP file. Please note that surface etchings are a lowcost expenditure whereas laser prints are coloured.
Leather Case for sizes 8", 9" und 10"
Order.-No.
3001.010.000
Description
3002.120.000
Protective Leather Cases 5", bordeaux
3002.180.000
Protective Leather Cases 6", black
3002.180.000
3002.120.000
3001.050.000
Protective Leather Case for Tailor's Shears - black
Leather Case for Tailor's Shears black outside - grey
Sudet velvet inside
Art.-Nr. 1205/L/5”
ROBUSO Products are ideal Advertising
Media or Gift Items
You select what's best for your customers or deserving
employees. You can be sure of positive responses we shall be happy to advise you.
61
ADVERTISING GIFTS
1205/L/5”
TOOL ITEMS
SOLINGEN
GERMANY
1055/L /9,5”
3
Index - in alphabetical order
A
Advertising Gifts
Aramide Shears
ARS Scissors and Shears
Page
61
8 / 9 / 10 / 11 / 14
14 / 32
B
Battery Powered Shears
20 / 24
C
Carbon-Fiber Shears
Cardboard Shears
Carpeting Shears
Chalk
Check Markers
Clippers
Control Notchers
Curtain Scissors
Cutters
Cutting Mats
10 / 11 / 12
45
43 / 44
54 / 55
50
40 / 41
50
42
56 / 57
52
8 / 9 / 10 / 11 / 14
E
EC Cutter
Edge Trimming Shears
Electric Shears
Embroidery Scissors
Hoog's Electro-Powered Shears
Hoog's Pneumatic Shears
Household Scissors
HSGM Hot Melt Cutters
24
10 / 13 / 43 / 44 / 45
16 / 17 / 18 / 19 / 21 / 24
36 / 38
F
42
54
39
43 / 44
G
Glass-Fiber Shears
Goldsmith Scissors
Grinding
10 / 11 / 12
61
59
H
Heavy-Duty Electro Powered Shears
Holster for Shears
62
18 / 19 / 21
20
35
23
K
Kai Cutters
Kai Scissors and Shears
Kai Rotary Blade Cutters
KDS Cutters
56 / 57
31 / 33 / 48
12 / 52
56
L
Laminating Shears
Leather Cases
Leather Shears
Left-Handers' Shears
Light Weight Scissors and Shears
Marking Pens
Martor Safety Cutters
Metal Shears
Mould Making Shears
Notchers
12 / 13
61
30 / 44 / 45
33
32 / 46 / 47 / 48
16 / 17
27
54 / 55
57
45
10 / 12 / 13
50
O
Overhead Suspender
Fabric Scissors
Fat Chalk and Refills
Flat-Top Scissors
Floor Layers' Shears
Page
MN
D
Dyneema Scissors
H
17
PQ
Painters' Shears
Paper Shears
Pattern Notchers
Pattern Shears
PELLORO Scissors and Shears
Pile Trimming Scissors
Pinking Shears
Pocket Scissors
Power Cutting Shears
proton Scissors and Shears
Punches
Quilting Scissors
39
39
50
44
27 / 34 / 35 / 40 / 41 / 42
43
34
11 / 42
16 / 17 / 18 / 19 / 21 / 24
8/9
51
36 / 38
R
Page
Regrinding Services
59
Replacement Blades for Wheel Cutters
52
Replacement Blades for Swissors
31
Replacement Blades for Cutters
57
Replacement Blades for Power Cutting Shears 17 / 18 / 19 / 20 / 21
Revolving Punch Pliers
51
ROBUR Scissors and Shears
27 / 33 / 36 / 37 / 40 / 41 / 46 / 47
ROBUSO-ELASTIC Shears
28 / 29 / 33
Rotary Blade Cutters
12 / 52
S
Safety Cutters
Scalloping Shears
Seam Rippers
Sewing Scissors
Snips
Stainless Steel Scissors and Shears
Straight Threadline Cutter
Swissors
3
57
34
53
35
40 / 41
32 / 46 / 47 / 48
52
31
T
Page
Tailor's Chalk and Refills
Tailor's Shears
Textile Scissors
Thread Clippers
Tracing Wheels
Tweezers
54 / 55
26 / 27 / 28 / 29 / 30 / 31 / 32
38 / 42
40 / 41
53
53
U
Universal Cutters
Universal Scissors, small
Upholstery Shears
Upper Leather Shears
UV Tincture and Pens
56 / 57
37
43
43
55
VW
Vanishing Chalk and Pens
54
Weavers' Scissors
Wheel Cutters
9 / 11 / 14 / 36 / 37 / 39
12 / 52
Index - in consecutive order of the first four digits of the Art.-Nos.
Order.-No.
0013
0108
0110
0120
0250
0253
0258
0259
0260
0321
0322
0323
0401
0403
0404
0405
0406
0508
0614
0615
0705
0720
Page
36
39
35
35
35
42
40
41
40
37
9/ 11
37
36
36
38
11/13
36
39
37
9/11
42/61
42
Page
Order.-No.
11
0721
39
0901
32
1001
32
1010
33
1012
26/27
1020
30
1023
8/10/12
1024
30
1025
1026 9/10/12/13
32
1027
30
1030
33
1040
33
1048
33
1049
28
1052
29/61
1053
29/61
1055
34
1061
34
1062
34
1063
9/10
1071
Order.-No.
1073
1075
1076
1077
1078
1080
1081
1130
1131
1139
1140
1142
1144
1145
1146
1150
1155
1165
1166
1170
1171
1172
Page
44
45
45
45
45
44
10
50
50
50
51
51
51
53
53
12/52
56/57
53
53
54
54
54
Order.-No.
1173
1174
1175
1176
1178
1201
1202
1203
1205
1215
1248
1249
1253
1260
1262
1271
2003
2007
2009
2010
2011
2025
Page
54
54 / 55
55
55
55
38
38
38
42/61
42
43
13
9/13
43
43
43
47
47
46
46/47
47
32
Order.-No.
2026
2037
2038
2060
2077
2080
2082
2090
2091
2100
2101
2110
2111
2112
2200
2203
2210
2215
2220
2221
2222
2223
Page
32
47
47
46
46
34
34
31
31
32
32
14
14
14
31
31
48
48
48
33
48
48
Page
Order.-No.
53
2330
53
2345
53
2354
53
2382
53
2386
53
2442
16/17
2920
23
2940
2950 18/19/20/21
24
2960
61
3001
27/61
3002
36
519010
37
520013
27
5402…
27
5403…
33
5404…
63
ROBUSO Stahlwarenfabrik
Buntenbach & Sohn GmbH
PO BOX 17 02 20
42624 Solingen
Germany
Neuenhofer Straße 75
42657 Solingen
Germany
Tel. +49 - 212 - 81 50 16
Fax +49 - 212 - 81 09 26
E-Mail: [email protected]
www.robuso.de

Scissors

Transcription

Similar documents

Redken Men`s Zone

Untitled - Bron

Wolff 2015/2016 Beauty Shears Catalog

CHOPMASTER - Forrest Saw Blades

Christopher, fifteen years old, has an extraordinary brain

Hold the indicating block against the groomer or verticutter blades to

Paul Strisik NA - American Fine Art Magazine

Duramatic Ad

Wahl Deluxe Style Pro Clipper Quick Start Guide