Performance Credenzas Planning Guide + Price List 2016
Transcription
Performance Credenzas Planning Guide + Price List 2016
Performance Credenzas Planning Guide + Price List | January 2016 You design. Let us handle the details. Nucraft offers a free, online product configuration and specification service that saves you time and allows you to be creative while leaving the nuts and bolts to someone else. • No special software is required, nor is there any learning curve. • The service applies to all Nucraft products including private office products, conference room products, reception stations, and training tables. • You can generate quick and accurate answers for budget estimates and/or quick and exact specifications for final quotes. • Revisions can be made any time you like, and total accuracy is guaranteed. How it works. Called iSpec, this service is as close as your phone and your Internet-connected computer. You can use it anytime you need to configure, specify, or price Nucraft furniture. Here is how it works : 1. Schedule an iSpec session by calling 1-877-NUCRAFT or by visiting www.nucraft.com/ispec. (You will be asked to provide some preliminary information on the project. We will respect the confidentiality of the information.) 2. At the scheduled time, a Nucraft project specialist will contact you at the telephone number you provide. 3. You will be directed to the online collaboration site. (All you need is an Internet connection and a Web browser.) 4. Once you are at the site, the Nucraft project specialist will work with you in real time to configure the required product based on your specific direction. (Watch the screen as your workstation appears.) 5. When the specification process is completed, you will receive 2-D or 3-D drawings, the specification itself with guaranteed accurate pricing, and the estimated lead time. (Follow-up sessions may be scheduled at your request to make any necessary modifications.) iSpec—it’s fast, it’s flexible, it’s a free service from Nucraft. W W W . N U C R A F T . C O M / I S P E C • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 421-436 423-430 432-434 435 437-452 439-446 448-452 453-514 455-480 482-513 515-570 515-536 517-523 524-536 537-550 539-542 544-548 551-570 553-559 560-569 571-582 574-578 580 581 581 583-596 587 588-589 590 591 592 593 594 595 596 597-602 599 600 601 602 602 603-605 603-605 AT I VA D I S C O V E RY DUOMO Tavola Planning Tables and Power Options Credenzas Tesano Planning Tables and Power Options Two4Six Meeting Planning Tables and Power Options TRAINING PRODUCTS Fleet Planning Tables, Tops and Accessories Saber Planning Tables, Tops and Accessories Satellite Planning Tables, Tops and Accessories PRESENTATION PRODUCTS High Tech Lectern Neos Reveal Markerboard Whiteboards OCCASIONAL TABLES Arena Emme Moment Paragon Plaza Stratum Talis Tiro View BENCHES Emme Moment Plaza Talis Tiro BOOKCASES Bookcases ARENA E L E VA R E FLOW 2-10 2-3 4-5 6-7 8 9 11-513 11-36 13-25 26-31 32-33 34-35 37-54 40-47 48-53 54 55-82 57-71 72-76 77-82 83-104 84-99 100-104 105-146 107-128 130-142 143-145 147-220 150-179 180-188 189-215 216-219 221-258 223-243 244-255 256-258 259-278 261-269 270-276 277-278 279-316 281-299 300-312 313-315 317-358 319-343 344-357 358 359-374 361-364 366-373 375-384 376-381 382-383 385-420 387-406 408-417 418-420 AGILITY INTRODUCTION General Information Finish Information Surface Materials Upholstery Fabric COM Specification CONFERENCING PRODUCTS Agility Planning Tables Ancillary Products Power Options Arena Planning Benches & Consoles Occasional Tables Ativa Planning Enclosed Squares & Rectangles U-Shaped Discovery Planning Tables and Power Options Elevare Planning Tables and Power Options Credenzas and Media Consoles Flow Planning Flow XT Tables and Power Options Flow Tables and Power Options Credenzas Forte Planning Tables and Power Options Credenzas and Lecterns Kai Planning Tables and Power Options Credenzas Neos Planning Tables and Power Options Credenzas and Presentation Products Passport Planning Tables and Power Options Activity Walls Performance Credenzas Planning Credenzas Recycle Center Planning Recycle Center Saber Planning Tables and Power Options Credenzas, Phone Stands and Tech Carts INTRODUCTION Table of Contents W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 1 General Information This price book supercedes all previous versions. Before placing your order, confirm you have all required information necessary. Lead times for orders begin after all required information is included and correct. Delivery Information We know lead times are important and sticking to them even more so. We work to maintain a 6-8 week lead time on all standard products in this book from receipt of a clean order. All orders are acknowledged with an approximate shipping date and will be invoiced with the price in effect at the date the purchase order is received. Shipping charges are prepaid (within the continental U.S.). Therefore, pricing is a delivered price based on normal ground transportation. If you have special instructions, need to ship by air, or are shipping to Alaska or Hawaii, contact Nucraft Customer Service. Nucraft can also help arrange to have products blanket wrapped for an additional charge. Contact the Nucraft Customer Service team or specify it on your purchase order. Minimum Freight Charge: Any order below $2,000 net will be assessed a $260 net minimum freight charge (one per order). Orders are subject to acquiring the materials required for manufacturing. Fulfillment can be affected by strikes, fires, embargoes and acts of government. These elements are beyond our control. Nucraft offers a variety of services to accommodate a wide range of delivery requirements. Availability of these services is dependent on a number of factors and may not be offered with all shipments. Examples of delivery services that have additional fees include: • Specific date within our standard 3-5 day delivery window (for orders under $50,000 net) • Specific time of day, morning or afternoon (for orders under $50,000 net) • Delivery to a warehouse before delivery to its final destination (unless product is picked up at the warehouse) Contact the Nucraft Customer Service team for availability and pricing on these services. Freight Terms Shipping charges for Nucraft products are prepaid for standard delivery in the continental United States. Standard delivery is defined as follows: Product is delivered on a 53’ trailer being pulled by a long-haul tractor (total length of 85’). Facility will receive delivery Monday through Friday between the hours of 8:00 AM and 4:00 PM. Facility has docks with levelers and a fork truck for unloading. Product will be loaded on load bars two levels high. Receiving facility is responsible to have personnel on hand to unload the truck upon arrival, drivers do not unload. Delivery sites or times that do not meet this criteria will be accommodated, but will typically incur a charge to cover additional shipping costs. Please notify Nucraft in advance of the shipment if this is the case and the additional charge (if any) will be determined by Nucraft. Product ships FOB dock. The customer obtains title to their product and materials, and assumes the risk of loss for them, upon shipment from Nucraft’s facilities. Storage Nucraft has no storage facilities for finished product. If a customer cannot accept an order when it is ready for shipment, the customer must designate an alternative shipping address. If no address is provided, Nucraft may, at its discretion, transfer the product to storage. If product is transferred to an offsite storage facility, the customer may be charged for transportation to the facility and for any associated storage fees. Nucraft considers transfer of the product to a storage facility the equivalent of shipment, including invoicing and payment. Customers assume the risk of damage or loss during storage. Transportation Times and Delays Third party carriers that Nucraft contracts with will make reasonable efforts to accommodate requested delivery times and dates. Scheduled delivery appointments may, however, be delayed for a variety of reasons, including inclement weather, traffic, transportation equipment problems, and delays encountered at other delivery locations along the delivery route. Nucraft does not recommend scheduling activities that depend on the delivery appointment (for example, scheduling furniture installers to install furniture the day of the delivery appointment). Nucraft shall not be liable for any costs incurred as a result of a missed delivery appointment. Shipment Damage Claims Legal title to merchandise passes to the buyer upon acceptance by the carrier. Inspect all cartons upon delivery. Details of visible damage should be noted on the delivery receipt. Do not install product if damage is found upon inspection. The carrier should be notified by the buyer to inspect the merchandise, and file a claim immediately. If visible damage is not apparent, sign the delivery receipt “No visible damage.” This will allow recourse for a concealed damage claim. Although most claims for transportation damages must be filed against the carrier within nine months of the date of delivery, concealed damage claims must be filed within 15 days of receipt. Do not destroy packing materials until shipment has been inspected. Then proceed to file a claim with the carrier. Failure to make any claims against Nucraft within 10 days shall constitute acceptance of the merchandise and a waiver of any defects, errors or shortages discovered upon inspection. Cancellations Cancellations must be reviewed by our Customer Service team. Because we build your products to order, orders cannot be cancelled once processing has begun. Processing includes but is not limited to development of shop drawings and other engineering drawings. If cancellation is approved, a processing fee of 20-100% will be assessed based on the status of the order. Change Order Policy Nucraft will make every attempt to honor any reasonable change request to product provided that the request is received prior to start of production. Change orders will be accepted only if the request is made in writing and received in time to make the change. Nucraft reserves the right to increase our acknowledged price and ship date if necessary to make the requested changes. Please submit any change order request to our Customer Service team. Nucraft will assess charges to the customer as stipulated in the following: • Standard Orders: Change orders received prior to production will be charged $200 net to cover print and administrative costs. • Special Orders: Change orders received prior to production will be charged $200 net to cover print and administrative costs. There may be additional costs associated with engineering labor required for the change order. • Change orders received after production must be evaluated by Nucraft. If approved, the charge will be $200 net plus any restocking charges accumulated. There may be additional costs associated with engineering labor required for the change order. 2 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Repair Authorization Prior written approval is required for repairs of merchandise charged to Nucraft. Failure to do so will result in customer funded repairs. Credit Card Payments When paying by credit card (Visa, Mastercard or American Express), include the card number, expiration date, card holder name (printed) and card holder signature on the purchase order. A credit card payment form is available upon request. No cash discount allowed on credit card payments. Computer Aided Planning Nucraft products and pricing are available on CD via 2020 Cap, an AutoCAD®-based space planning tool. 2020 Cap is an integrated software system developed specifically for interior designers and facility planners to enhance workplace performance. This modern suite of applications works together seamlessly, in concert. Navigate catalogs, select products, design in plan view and 3D, assign options, create worksheets and build a project where you want, when you want. Take your pick. It’s dynamic and interactive. Design projects are a work in progress. And now you can perform any of the many discrete tasks that go into a project any time, any place. For additional information, you may contact 2020 Cap direct at 800-227-0038. iSpec® Nucraft offers a free online product configuration and specification service that saves you time and allows you to be creative while leaving the nuts and bolts to someone else. No specific software is required, nor is there any learning curve. This service applies to all Nucraft products. For additional information, call 1-877-NUCRAFT and ask for the iSpec Team or log on to www.nucraft.com/ispec. D I S C O V E RY This warranty does not cover: 1) Damage caused by a carrier 2) COM (Customer’s Own Material) specified by the customer that is not a standard product offering 3) Color, grain or texture of wood and other covering materials (due to the natural variations over which Nucraft has no control) 4) Damages resulting from user modification, attachments to a product, misuse, abuse, alteration or negligent use. - Recycled Content - Certified Wood - Low-Emitting Materials AT I VA Nucraft’s sole obligation under this warranty is to repair or replace, at Nucraft’s discretion, products which prove to be defective during the warranty period. Purchasers may be required to establish that a claim is within the warranty period. To initiate a warranty claim, the purchaser should contact an authorized Nucraft dealer. Our products are manufactured to meet the credit requirements of the U.S. Green Building Council’s LEED rating systems in one or more of the following categories: ARENA Warranty Nucraft warrants that each piece of furniture it manufactures will be free from defects in materials and workmanship for a period of ten years of single-shift use. Textiles, decorative trim, electrical components, lamps, mechanical devices, casters and custom-made products not described in Nucraft’s catalog are warranted for one year from the date of original delivery. Height adjustable desk mechanisms are warranted for two years. This warranty is applicable only if the furniture is given normal and proper care and is properly installed and maintained in an office environment. This warranty extends only to products manufactured and sold in North America and only to original purchasers acquiring new Nucraft products through authorized dealers, or from others specifically authorized by Nucraft to sell its products. Environmental Statement Nucraft is committed to supporting responsible environmental policies and practices in all that we do. We strive for sustainability, weighing our business decisions against the costs to the ecological, social and economic systems they affect. AGILITY Payment Terms Terms consist of a 1% cash discount for payment within 10 days of invoice date, or payment of the net amount within 30 days of the invoice date (1% 10 days, net 30 days). Discount is not allowed on credit card payments. INTRODUCTION General Information DUOMO Nucraft extends no other warranties, expressed or implied, including warranty of merchantability or fitness for a particular purpose. Nucraft shall not be liable for loss of time, inconvenience, commercial loss, incidental or consequential damages. E L E VA R E FLOW W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 3 Finish Information Surface Materials Palette We crafted our materials palette using the same demanding standards that distinguish our furniture. Thoughtful design and attention to every detail elevate your possibilities. Anchored by Nucraft veneers, unrivaled for clarity, quality, and depth of finish, our collection of surface materails comprises a sophisticated set of balanced elements that supports your design vision. Some elements have their roots in Nucraft’s rich heritage. Other’s are new materials and refelct current trends and taste. Together, they ensure that you’re ready for today and positioned well for the future. Beautifully. Custom Finishes Nucraft specializes in expert custom finish matching. For a nominal upcharge we can provide custom finishes, and we are frequently asked to match the finishes of other furniture manufacturers. For orders over $5000 list, a finish sample will automatically be sent for approval prior to entering the order. Additionally, for finishes that appear unusual to match or for customers directly requesting a sample, a finish sample will also be sent for approval prior to entering the order. Custom finishes requiring colored varnishes to create a painted look can only be applied to Maple veneer and require one extra week in addition to the standard leadtime. Nucraft’s standard black finish (G82) can be applied to all Nucraft standard veneers. Walnut is the standard black veneer. Other species must be specified when ordering. Custom finishes carry a 10% upcharge per item, per finish. Do not add the finish upcharge to any item that is not wood. Example: casters, ganging connectors. Treatments Note: Default veneer sheen will vary per finish and were determined by a team of experts who reviewed the colorways to determine if gloss or matte best highlighted the natural characteristics of the species of wood and the color of the stain. Default finish is bolded on Page 8. If no direction is provided on incoming orders, default sheen will be selected. Gloss: Gloss is a durable finish that tends to nicely mask normal wear and leaves wood grain visible to the eye. It achieves a medium gloss open pore appearance (40 – 50 sheen range). Finish numbers preceded by the letter “G” indicate a Gloss finish. Matte: Like Gloss, Matte is durable, tends to nicely mask normal wear and leaves wood grain visible to the eye. It achieves a low luster, open pore appearance (10 – 20 sheen range). Finish numbers preceded by the letter “M” indicate a Matte finish. Since each veneer type responds differently to both types of treatment, all will have a distinctive look and feel when finished. For example, a Walnut veneer with a Gloss treatment will remain much more textured than a Cherry veneer with the same treatment. 4 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T About the Wood All Nucraft veneers are carefully selected for uniformity of color and grain. Still, wood is a natural substance and minor variations may occur due to its own uniqueness. Because of this, the furniture you receive may not be an exact match to our samples. Nucraft takes great pride in our finish color consistency. However, wood is a natural product that will have color variation within a single piece of furniture, as well as from one piece to the next. Other factors also affect color over time, such as exposure to light (both intensity and duration). For example, lighter finishes cause more variation in colors over time. In cases where a returning customer wants a precise match with existing furniture, we recommend sending a sample of the existing furniture finish. Please contact Nucraft Customer Service to determine an appropriate sample. This will ensure a finish match between old and new orders. This type of order is considered a control sample. There will be a 10% upcharge on an order of this type. Due to natural aging of veneers, natural finishes may vary. Care and Maintenance of Wood Finishes Our finish material is a crystal clear, urethane acrylic blend. This type of finish may be repaired in the field by a qualified refinisher. Nucraft recommends using a damp cloth to clean your fine wood furniture. Always wipe with the grain of the wood. Should your wood furniture require a more thorough cleaning, we recommend using a mild cleaner such as Joy dish soap or Murphy’s oil soap, thoroughly diluted in water (one part soap to thirty parts water). Water will not damage Nucraft’s finish, but will leave surface spots when it dries. To avoid this, dry the surface with a soft cloth after it is cleaned. Marks that cannot be removed with the cleaning methods above may be able to be removed using naptha, a mild degreasing solvent. Caution: while the use of polishes that contain wax, petroleum solvents or silicones may immediately enhance the “shine” of a product, it may also eventually remove the fine original finish applied in our factory. Silicone on the surface of wood may also make it very difficult to respray or refinish. All Nucraft furniture is inspected and polished before it leaves our factory. In some instances, the packing materials may imprint on the factory polish. Cleaning and polishing the furniture once it is unpacked will normally restore the furniture to its original beauty. In some cases, the rubber support feet used on the bottom of common office equipment (teleconferencing phones, laptops, microphones, copiers, etc.) can create unsightly marks in the surface of wood tops, due to oxidation of the lacquer finish. We suggest these machines be placed on a protective type of padding, such as felt. Wood will fade as a result of exposure to UV light. This is particularly prevalent with light finishes. If color changes due to fading are a concern for your application, the impact can be minimized by selecting medium to dark stains for your wood surfaces. Our top coat includes a UV inhibitor which makes the finishes less prone to fading. Laminates Selected Formica® and Nevamar® laminates are available on Training Tables, Conference Tables, Conference Room Furniture and select Occasional Tables. For standard laminate and wood pricing, refer to individual item pricing columns. Price 80 80 80 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) • Kit model number • Quantity of kits • Specify finish (See Pages 6-7) General Information: • Touch-up kits must be ordered on a purchase order separate from Nucraft product due to Hazmat shipping D I S C O V E RY Satin Etched Glass Glass color may vary slightly on multi-piece conference table tops over 180” x 60” when satin etched glass is specified due to the iron content and etching process of the glass. Description Metal Kit Paint Kit Stain Kit AT I VA Care and Maintenance of Metal Metal surfaces can be wiped with a damp cloth and rubbed dry. A mild non-abrasive household liquid detergent can be used if necessary. Regular maintenance of metal components, including tightening of fasteners and light lubrication of moving parts, will extend the life of your furniture. Touch Up Finish Kits Model # KIT-M KIT-P KIT-S ARENA Care and Maintenance of Laminate Laminate surfaces may be cleaned with a damp cloth and ordinary soap or non-abrasive household liquid detergent. Dry the surface with a clean cloth or soft paper towel to prevent streaks from appearing. Care and Maintenance of Leather Genuine leather requires very little care. Nucraft recommends that leather be dusted regularly. If a more thorough cleaning is needed, use lukewarm water and a mild, non-abbrasive soap. Generate some lather and lightly rub the surface with cheesecloth. Rinse off any soap film with clean water and towel dry. The leather may dry dull. To restore the leather to a normal gloss, rub it with a clean towel. Never use furniture polish, oil, varnish or ammonia. Saddle soap may be used to prevent the leather from becoming brittle or cracked and to maintain the original supple finish. AGILITY Non-Standard Laminates To order a color other than those on our list (see Page 7), refer to Nevamar or Formica standard grade, matte texture laminate offerings (excluding manufacturers’ non-standard matte offering). Add $90 list per item for a non-standard solid, matrix or pattern. Add 20% per color for woodgrain laminates (includes stained-to-match for remainder of unit to match laminate color). Add one week to the lead-time for all non-standard laminate orders. Call the Nucraft Customer Service team for quotes on premium grades and laminates. Mirror and metal laminates are not available. INTRODUCTION Finish Information Care and Maintenance of Glass Clear or frosted glass may be cleaned with commercial glass cleaner. Be sure to use a lint-free cloth if cleaning the frosted side of the glass. DUOMO E L E VA R E Stone and Solid Surface Material Despite its reputation for durability, natural stone can easily be broken during handling and/or installation if proper techniques are not followed. In addition, Nucraft is not responsible for the installation of natural stone or solid surface materials on its products. Therefore, installers specifically trained in the installation of these materials must be utilized to ensure a quality installation. Nucraft shall not be liable for any damages incurred during the handling and/or installation of natural stone or solid surface materials on its products. Care and Maintenance of Granite Granite surfaces may be cleaned with a damp cloth and ordinary soap or non-abrasive household liquid detergent. Dry the surface with a clean cloth or soft paper towel to prevent streaks from appearing. FLOW W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 5 Performance Credenza Surface Materials WOOD FINISHES STONE TOPS STANDARD Default veneer sheen will vary per finish and were determined by a team of experts who reviewed the colorways to determine if gloss or matte best highlighted the natural characteristics of the species of wood and the color of the stain. Default finish is bolded. If no direction is provided, default sheen will be selected. Ash Chalk Angora Oat Matte Gloss M48 M49 M45 G48 G49 G45 Rift Cut Oak Nougat Wheat Carbon M01 M02 M03 G01 G02 G03 Cherry Sherry Cognac Spring Auburn M20 M21 M95 M93 G20 G21 G95 G93 Walnut Marron Mocha Zinc Onyx Otter Double Cut Canvas Pearl Gray Cashmere Charcoal W W W . N U C R A F T . C O M ST01 Quartz | Caesarstone Pure White Blizzard Linen Concrete Raven ST04 ST07 ST05 ST08 ST06 Quartz | Okite Bianco Carrara ST03 Wilsonart Designer White M35 M33 M30 M82 M31 Clove Meringue Quill White G35 G33 G30 G82 G31 M2210 M2220 M2211 M964 Matte M60 M25 M37 M99 M96 • T O L L G2210 G2220 G2211 G964 Gloss G60 G25 G37 G99 G96 F R E E : ST11 GLASS (SATIN OR GLOSS) 6 Stone Absolute Black Honed Granite SOLID SURFACE HERITAGE COLLECTION Heritage Collection consists of popular mainstays of the Nucraft veneer collection preserved from our previous offering. Natural Maple Natural Walnut Castano Walnut Cordovan Cherry CoCo Cherry Available only on select Occasional Tables and Flow. Stone orders may affect lead times. Please contact Nucraft Customer Service for details. 1 - 8 7 7 - N U C R A F T Satin Gloss VS MS QS WS VG MG QG WG METAL FINISHES LAMINATES A8009 A8004 A8006 A8007 A8005 PAINTS S88 S8004 S8006 S8007 S8005 Paint to Match To request a custom paint color, contact Nucraft Customer Service. A paint sample must be matched and approved prior to order. Wood Grain Laminates Formica White Ash Formica Natural Ash Formica Aged Ash Formica Weathered Ash Formica Oiled Legno Formica Bleached Legno Formica Jarrah Legno Formica Blackened Legno Formica Pecan Woodline Formica Chestnut Woodline 8841-58 8843-58 8844-58 8842-58 8846-58 8845-58 8847-58 8848-58 5883-58 5884-58 Solid Laminates Formica Brite White Formica Dover White Formica Pearl Formica Graystone Formica Folkstone Formica Graphite 459-58 7197-58 934-58 464-58 927-58 837-58 R01 R01 R02 R02 R03 R05 Patterned Laminates Nevamar Cool Chic Nevamar Serene Stardom Nevamar Calm Distinction Nevamar Easy Elegance Wilsonart Sheer Mesh Wilsonart Grey Mesh Wilsonart Pewter Mesh VA7002T VA5001T VA6001T VA5002T 4876-38 4877-38 4878-38 R02 R05 R05 R05 R02 R02 R05 M8841 M8843 M8844 M8842 M8846 M8845 M8847 M8848 M5883 M5884 R02, R01 R02 R04 R05 R05 R03 R05 R05 R04 R05 ARENA Burnished Cloud Foil Galaxy Shadow Code Suggested Coordinating ABS Edgeband Wood Finish Coordinate AGILITY Burnished Cloud Foil Galaxy Shadow INTRODUCTION Performance Credenza Surface Materials AT I VA D I S C O V E RY Ashen Parchment Shale Stone Whitecap DUOMO ABS FINISHES R04 R02 R05 R03 R01 E L E VA R E FLOW W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 7 Upholstery Fabric Applies to Benches Nucraft is pleased to have partnered with KnollTextiles, Spinneybeck, and UltraFabrics to offer a concise selection of standard upholstery fabrics pre-approved for use on our products, with prices that are figured into our graded-in system. We’ve carefully curated a selection of each of the textile’s color lines to coordinate with our materials offering. However, all colorways are approved and available as standard. Please contact fabric manufacturer for sampling support. Knoll Felt* | K1207 | Grade C Ivory 1 Apple 3 Canary 5 Poppy 7 Cadet 11 Mocha 15 Pewter 17 Tar 20 Knoll Hopsack* | K1206 | Grade C Buff 1 Stucco 2 Lime 4 Magenta 9 Red 10 Admiral 11 Putty 13 Black 16 Knoll Hourglass* | K1523 | Grade A Gull 2 Sandbar 3 Flax 5 Beeswax 6 Sizzle 9 Tart 11 Bluebird 13 Spring 16 Bark 21 Misty 24 Alley 27 GRADED-IN FABRIC PROGRAM Top quality upholstery and fabrics from some of the biggest names in the textile industry have been graded into this price list. For a current list of graded-in manufacturers and additional information on our graded-in fabrics program, please go to www.nucraft.com. All Graded-In and COM fabrics will require pre-approval for use on Talis and Arena benches. Please contact Nucraft Customer Service for assistance with this process. *In addition to being available on all of our bench and pedestal cushion applications, these upholstery fabrics are approved for tackzone application on Nucraft products. 8 W W W . N U C R A F T . C O M • T O L L Spinneybeck Volo | VO | Grade F Lichen 902 Rust 905 Talc 939 Mauve Beige 954 Oatmeal 957 Parchment 960 Petroglyph 962 Tuscany 963 Casablanca 975 Dromedary 977 Black BLCK Spinneybeck Vincenza | VZ | Grade E Salvi 2101 Ponte Furo 2102 Villabalzana 2108 Castello di Bellaguardia 2112 Scamozzi 2114 Peralolo 2115 Costozza 2116 Nocciola 2117 Appia Antica 2120 Cinque Terre 2122 Black BLCK UltraFabrics Brisa | 303 | Grade B French Vanilla 3866 Birch 3019 White 5747 Bone 3822 Shiitake 3022 New Sand 3946 Bark 3914 Peat 3200 Canyon 3825 Coffee Bean 3023 Black Onyx 5749 F R E E : 1 - 8 7 7 - N U C R A F T NET PRICE PER YARD $0 - $20.00 $20.01 - $35.00 $35.01 - $50.00 $50.01 - $65.00 $65.01 - $80.00 $80.01 - $95.00 $95.01 - $110.00 $110.01 - $125.00 NUCRAFT GRADE A B C D E F G H For COM orders please include the following: • Name of customer • Customer’s purchase order number • Model number and quantity of piece(s) to be covered • Specify right-way or railroad application (railroad is the default if no selection is made) • If fabric is a stripe or pattern, specify vertical or horizontal application • Supplier’s name, material number and description FIRE RESISTANCE All Nucraft benches incorporating upholstery fabrics meet California Technical Bulletin 116/117 and BIFMA X5.7 - Voluntary Upholstered Furniture Flammability Standard for Non-Residential, Non-Live-In Occupancies. YARDAGE ESTIMATING All yardages in the price list are based on 54” wide plain (no match) fabric. The following is a guide for fabrics that are less than 54” wide or have a pattern match. A full “domestic” hide is approximately 50-60 square feet. A specialty or calf hide is approximately 35 square feet. Of this footage there are various non-usable areas included in the hide’s size. Conversion of fabric yardage to leather is approximately 1 yard = 18 square feet. Fabric Less Than 54” Wide For 50” wide fabrics allow 10% additional fabric For 48” wide fabrics allow 15% additional fabric For 45” wide fabrics allow 20% additional fabric For 36” wide fabrics allow 50% additional fabric Bench Requirements 48” benches will require 1/2 domestic hide or 1 full calf hide. INTRODUCTION COM Specification AGILITY COM LEATHER SPECIFICS The following is a guide for specifying leather requirements. The guide is based on the following general information. ARENA 60” benches will require 1 domestic hide or 2 calf hides. 72” benches will require approximately 1 full domestic hide or 3 calf hides. The boxing around the seat, if required, will have 4-6 seams that will be placed aesthetically based on the yield and usable remains of the hides. AT I VA For Pattern Match Fabrics 3” to 14” repeat allow 15% additional fabric 15” to 19” repeat allow 20% additional fabric 20” to 27” repeat allow 25% additional fabric 28” to 36” repeat allow 30% additional fabric Nucraft may add a charge for sewing, cutting and matching unusual COM or COL materials to cover additional costs. Call customer service for pricing. D I S C O V E RY It is the sole responsibility of the customer to determine that the fabric is appropriate for the application in which it will be used. Once COM/COL is accepted, Nucraft assumes no responsibility for its overall appearance, flammability, normal durability, color fastness or any other quality after upholstered on a Nucraft product beyond our normal quality standards. DUOMO All Graded-In and COM fabrics will require pre-approval for use on Talis and Arena benches. Please contact Nucraft Customer Service for assistance with this process. E L E VA R E The fabric should be sent to the following address: Nucraft Furniture Company 5151 West River Drive Comstock Park, MI 49321 Attn: Order Processsing FLOW W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 9 10 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T FORTE KAI NEOS Performance Credenzas PA S S P O R T PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 359 Performance Credenzas Overview CONSOLES Page 368-369 UTILITY CREDENZAS Page 370-377 FOOD SERVICE CREDENZAS Pages 378-383 360 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T FORTE Performance Credenzas Planning Section Contents Specification Overview Detail Overview 361 362-364 365 Edge Profiles 366 KAI Dimensions NEOS Specification Overview Consoles Utility Credenzas 1.Select the Size When specifying a Utility Credenza, you’ll first select between conference and buffet heights. Then select the appropriate width; two, three, four and five door credenzas are available. 3.Select the Options Choose the desired edge profile. Credenzas are available in four edge profiles, which are along the front edge only. Locks can also be selected, if desired. Painted plinth base or painted reveal, along with a painted case option, are also available as a design detail. Integrated or metal pulls can be specified, if desired. 4.Select the Surface Materials Choose between veneer or laminate for the top surface, and veneer or painted options for the case. All standard veneers, laminate and paint options are available. Select a metal finish for pulls, the painted plinth base or reveal. Laminate and ABS choice must also be selected, if specified. W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T TA V O L A 3.Select the Options Choose the desired edge profile. Credenzas are available in four edge profiles, which are along the front edge only. Painted plinth base or painted reveal, along with a painted case option are also available as a design detail. Integrated pulls, metal pulls or locks can also be specified if desired. 2.Select the Components If you have selected a Pre-Configured Credenza, you can skip this step. Build-Your-Own Credenzas come with adjustable shelves as standard. Additional components are available, if desired. Choose from a set of three drawers, open module to slide in a refrigeration unit (center position only), or front or end opening trash/recycling unit. Grain matched door fronts for refrigeration units are also available. Refrigerators are not included with Food Service Credenzas. SABER 2.Select the Components Credenzas come with adjustable shelves as standard. Additional components are available, if desired. Choose from sliding or fixed equipment racks, set of three drawers, or front or end opening trash/recycling unit. A thermostatically controlled fan can be added to the back panel to remove heat generated by enclosed equipment. 1.Select the Style and Configuration Food Service Credenzas are standard with three doors in buffet height. Styles are available with double sided, single sided or no pull-out worksurfaces. Pre-configured credenzas are also available for ease of specification. To select specific components for each opening, choose the Build-Your-Own credenzas. RECYCLE CENTER 3.Select the Surface Materials Choose between veneer or laminate for tops, and veneer or painted cases; all standard veneers, laminates and ABS edge options are available. If pulls have been optioned, select metal finish. Laminate choice must also be selected, if specified. Food Service Credenzas PERFORMANCE CREDENZA 2.Select the Options Choose the desired edge profile. Consoles are available in four edge profiles, which are along the front edge only. Consoles are standard with a natural finger pull on the bottom of the drawer fronts. Select the optional applied pull if the aesthetic of a pull is desired. PA S S P O R T 1.Select the Size When specifying a console, you’ll first select between conference and buffet heights. Then select the appropriate width; three, four and five drawer consoles are available. 4.Select the Surface Materials Choose between veneer, stone, glass, solid surface or laminate tops. Cases can be either veneer or painted: all standard veneers, paint color and laminate options are available. Select a metal finish for pulls or the painted plinth base or reveal, if specified. Laminate choice must also be selected, if specified. 361 Performance Credenzas Planning Detail Overview − Utility Credenzas Components Edge Profile Veneer Tops are 1-1/4” thick with 3/8” deep wood edge band. The edge band is veneered over for a clean appearance. Credenzas are available in four edge profiles, which are along the front edge of the top. Laminate tops with ABS edge are 1-1/4” thick and 2mm ABS square edge. Credenzas come with adjustable shelves as standard. Additional components are available, if desired. Choose from sliding or fixed equipment racks, set of three drawers, or front or end opening trash/recycling unit. Reveal Edge Profile Reveal and Plinth Base Credenzas are designed with a reveal and plinth base that are recessed on all four sides. Standard in veneer, both are available painted to offer aesthetic flexibility. Fixed Equipment Rack (optional) End Opening Trash/Recycling (optional) Plinth Base Cable Management Ventilation Cables can be routed into the case through the round cutout in the back panel or through the cut-back bottom panel. Cables can pass between modules via a mouse hole in the upper back corner of the side panels. Utility Credenzas are standard with a cut-back bottom panel and round cutouts in each opening to create a convection current needed for passive ventilation. To control ventilation, a thermostatic fan can be added to the round cutout. The fan is included when the sliding or fixed rack is specified, or can be ordered separately. The fan activates automatically at 87º F and turns off when the ambient temperature in the cabinet reaches 85º F. Ventilation Cutouts 362 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Thermostatic Controlled Fan (optional) Ventilation Cut-Back Performance Credenzas Planning FORTE Detail Overview − Utility Credenzas 120”-long Utility Credenza KAI The longest Utility Credenza is 120” and consists of two cases (one 72”-long and one 48”-long) joined together with a one-piece top. In this particular unit, the 24” Open Module option for a refrigerator is limited to the second opening from the left. Shelves Behind Door NEOS Front Pull Out Trash/Recycling Fixed Equipment Rack Drawer Fronts for Refrigerator Option *Refrigerator sold separately Drawers Behind Door PA S S P O R T 120” PERFORMANCE CREDENZA 24” Open Module 72” 48” RECYCLE CENTER 3-1/2” 26-1/2” SABER 21-1/2” W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T TA V O L A Note: All images above show the 24” Open Module option for a refrigerator unit with the optional drawer fronts. If these options are not selected, this section of the case includes the plinth base. 363 Performance Credenzas Planning Detail Overview − Food Service Credenzas Edge Profile Flip-Up Top The flip-up top pivots to reveal a durable laminate surface. The cylinder and spring mechanism creates assisted open and closed motion. Flip-Up Shelves Reveal Flip-Up Top Pull-Out Worksurface Flip-Up Shelves The Flip-up shelves, standard, provide a heavy duty auxiliary surface. When not in use, they fold flat against the underside of the top. Tops are 1-1/4”-thick with either a 7/8”-deep wood edge band on veneer and laminate tops, or a 2mm ABS edge on laminate tops. The edge band is veneered over for a clean appearance. Credenzas are available in four edge profiles, which are applied to the front edge of the top. Components Build-Your-Own Credenzas come with adjustable shelves as standard. Additional components are available, if desired. Choose from a set of three drawers, open module to slide in a refrigeration unit (center position only), or front or end opening trash/recycling unit. Grain matched door fronts for refrigeration units are also available. Refrigerators are not included with Food Service Credenzas. Pull-Out Worksurfaces Pull-Out Worksurfaces provide additional serving surface on the same plane as the main surface. Available on the left end, right end or both ends, they pull out when needed and store away into the case when not in use. Reveal and Plinth Base Plinth Base Credenzas are designed with a reveal and plinth base that are recessed on all four sides. Standard in veneer, the reveal and plinth base are available painted to offer aesthetic flexibility. Components: 364 Drawers Trash/Recycling Open Module •(3) white drawers behind one door •(2) 41 qt. containers provided •White painted surround provides clean aesthetic •Front opening and end opening available •Available in center position only •Reference www.nucraft.com for recommended refrigerator suppliers •Grain-matched drawer fronts are available for recommended models (as shown above) W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Dimensions: FORTE Performance Credenzas Planning Food Service Credenza 116" 72" 9-5/16" 31" KAI 12-1/8" 22" 61-11/16" 32-11/16" NEOS Side View – Open 116" Side View – Closed 10-1/2 72" PA S S P O R T 9-5/16" 31" 29-7/8 12-1/8" 27-3/4" 36-13/16" PERFORMANCE CREDENZA 32-11/16" 27-7/8 Drawers Trash/Recycling - Front Open Trash/Recycling - End Open RECYCLE CENTER Component Dimensions: SABER 4" 7" 18-1 20" 21-1/2" 21-1 /2" W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T TA V O L A /2" 365 Performance Credenzas Planning Edge Profiles (all shown with the integrated pull option) Veneer 1-1/4” 1/2” Laminate with ABS Edge Laminate with Hardwood Edge 1-1/4” 1-1/4” 1/2” 1/2” Glass 1/4” 3/4” 1/2” Solid Surface Stone 1” 2cm 1/2” 1/2” 366 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T FORTE Performance Credenzas Planning KAI NEOS PA S S P O R T PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 367 Performance Credenzas Consoles Veneer Top with Hardwood Edge Console Price Veneer Premium Veneer -V -PV Model # W x D x H Description Conference Height PC-C-5929 PC-C-7729 PC-C-9529 58 7/8 x 18 x 29 76 1/2 x 18 x 29 94 1/2 x 18 x 29 Three Drawers Four Drawers Five Drawers 3264 4067 4867 3590 4474 5354 Buffet Height PC-C-5937 PC-C-7737 PC-C-9537 58 7/8 x 18 x 37 76 1/2 x 18 x 37 94 5/8 x 18 x 37 Three Drawers Four Drawers Five Drawers 3754 4674 5598 4129 5141 6158 PC-C-7729 Options: Pulls: Add -PL $155 for 59”, $205 for 77” and $246 for 95” PC-C-7737 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish • Choose Metal Finish, if -PL is selected • Choose Edge Profile (front edge top only): RK - Radius Knife RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 3/8” deep wood edge band, veneered over •Panel legs are 2 1/4” thick •Drawer fronts are standard with natural finger pull. If aesthetic of pulls is desired, select -PL for pull option. •Consoles ship fully assembled 5” Pull (Optional) 368 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Laminate Top Price Console Laminate with ABS Edge & Painted Case Inset Laminate with Wood Edge & Veneer Case -PE -P Model # W x D x H Description Conference Height PC-C-5929 PC-C-7729 PC-C-9529 58 7/8 x 18 x 29 76 1/2 x 18 x 29 94 1/2 x 18 x 29 Three Drawers Four Drawers Five Drawers 2612 3253 3893 3084 3843 4599 Buffet Height PC-C-5937 PC-C-7737 PC-C-9537 58 7/8 x 18 x 37 76 1/2 x 18 x 37 94 5/8 x 18 x 37 Three Drawers Four Drawers Five Drawers 3053 3800 4551 3547 4417 5290 KAI PC-C-7729 FORTE Performance Credenzas Consoles Options: Pulls: Add -PL $155 for 59”, $256 for 77” and $246 for 95” NEOS PC-C-7737 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish, if -P is specified • Choose Laminate Finish • Choose Metal Finish, if -PL is specified • Choose ABS Edge Finish if -PE is specified • Choose Paint Finish if -PE is specified • Choose Edge Profile (front edge top only) if -P is specified: RC - Reverse Convex OR - Knife PA S S P O R T RK - Radius Knife SQ - Square 5” Pull (Optional) Laminate with ABS Edge Laminate with Hardwood Edge 1-1/4” RECYCLE CENTER 1-1/4” PERFORMANCE CREDENZA General Information: •Tops are 1-1/4” thick •Inset laminate tops have a 3/8”-deep wood edge band •Laminate with ABS edge tops have a 2mm-thick ABS square edge •Panel legs are 2 1/4” thick •Drawer fronts are standard with natural finger pull. If aesthetic of pulls is desired, select -PL for pull option. •Laminate with ABS Edge (-PE) only available with painted case option SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 369 Performance Credenzas Utility Credenzas Veneer Top with Hardwood Edge Internal Width Utility Credenzas Internal Depth Internal Height Price Veneer Premium Veneer -V -PV 23-7/16 23-7/16 23-7/16 23-7/16 5431 6680 7933 9083 5974 7348 8726 9991 30-1/8 30-1/8 30-1/8 30-1/8 6243 7684 9122 10445 6867 8452 10034 11490 Model # W x D x H Description Conference Height PC-U-4829 PC-U-7229 PC-U-9629 PC-U-12029 48 x 24-3/4 x 29 72 x 24-3/4 x 29 96 x 24-3/4 x 29 120 x 24-3/4 x 29 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 Buffet Height PC-U-4837 PC-U-7237 PC-U-9637 PC-U-12037 48 x 24-3/4 x 37 72 x 24-3/4 x 37 96 x 24-3/4 x 37 120 x 24-3/4 x 37 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 PC-U-7229 PC-U-7237 Options: Locks: Add -L Integrated Pull: Add -IP Painted Plinth Base: Add -PBP Painted Reveal: Add -RP Integrated Pull (Optional) $142 $272 for 48” Credenzas, $334 for 72” Credenzas, $397 for 96” Credenzas, $454 for 120” Credenzas No charge No charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish • Choose Metal Finish for Pulls unless -IP is specified • Choose Paint Finish, if -RP or -PBP options are specified • Choose Components, if applicable (see next page) • Choose Edge Profile (front edge top only): RK - Radius Knife RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 3/8” deep wood edge band, veneered over •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Conference Height Credenzas ship with one adjustable shelf behind each door and metal pulls, unless other components are specified •Buffet Height Credenzas ship with two adjustable shelves behind each door and metal pulls, unless other components are specified •Back panel has ventilation cutout for each position. Cutout can accept optional fan if additional airflow is needed. •Metal finish defaults to pull finish when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. •48”-96” credenzas ship in one piece; 120” credenzas will ship with two pieces for the case and one piece for the top 370 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Performance Credenzas Utility Credenzas Components Model # FORTE Veneer Top with Hardwood Edge Description Price Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) End Opening Component (only available in 1st and last positions) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers 810 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI Accessories FAN DF-GE 810 2224 606 1910 0 383 321 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component, one per location. B 2-Door Credenza A B C 3-Door Credenza A B C D A 4-Door Credenza B C D E NEOS A 5-Door Credenza PA S S P O R T PERFORMANCE CREDENZA General Information: •Door on trash/recycling unit pulls out with bin •Trash/recycling units have a 41 qt. capacity • Maximum of 1 trash/recycling unit for a 2-Door Credenza, 2 trash/recycling units for both 3-Door and 4-Door Crendenzas, and 3 trash/recycling units for a 5-Door Credenza •Drawers and trash bin surround are painted Cloud •Labels are included with pull-out trash/recycling unit •Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Trash/recycling units are non-locking • OM-[ ] only available in Position B on 3-Door, 4-Door and 5-Door Buffet Height Credenzas, 33-7/8” H x 24”W x 24-3/4”D, adds 1” to the overall depth of the Credenza • Open module is intended for refrigeration unit (refrigerator not included) •48” - 96” Credenzs ship fully assembled; 120” credenzas will ship in 3 pieces, a 72” credenza, 48” credenza and a 120” long common top. •120”-L credenzas consists of a 72” and 48” credenza side by side with a common top. The 72” credenza will always be on the left side and the 48” credenza will always be on the right side. RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 371 Performance Credenzas Utility Credenzas Laminate Top Internal Width Utility Credenzas Model # Internal Depth Internal Height Price Laminate with ABS Edge & Painted Case Inset Laminate with Wood Edge & Veneer Case Conference Height PC-U-4829 PC-U-7229 PC-U-9629 PC-U-12029 W x D x H Description -PE -P 48 x 24-3/4 x 29 72 x 24-3/4 x 29 96 x 24-3/4 x 29 120 x 24-3/4 x 29 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 23-7/16 23-7/16 23-7/16 23-7/16 4345 5344 6347 7267 5133 6313 7497 8585 Buffet Height PC-U-4837 PC-U-7237 PC-U-9637 PC-U-12037 48 x 24-3/4 x 37 72 x 24-3/4 x 37 96 x 24-3/4 x 37 120 x 24-3/4 x 37 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 30-1/8 30-1/8 30-1/8 30-1/8 5076 6248 7417 8493 5899 7262 8620 9871 PC-U-7229 PC-U-7237 Options: Locks: Add -L Integrated Pull: Add -IP Painted Plinth Base: Add -PBP Painted Reveal: Add -RP $142 $272 for 48” Credenzas, $334 for 72” Credenzas, $397 for 96” Credenzas, $454 for 120” Credenzas No charge No charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish if -P is specified • Choose Laminate Finish • Choose ABS Edge Finish, if -PE is specified • Choose Metal Finish for Pulls unless -IP is specified • Choose Paint Finish, if -RP, -PE or -PBP options are specified • Choose Components, if applicable (see next page) • Choose Edge Profile (front edge top only), if -P is specified Integrated Pull (Optional) RK - Radius Knife RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 3/8” deep wood edge band •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Conference Height Credenzas ship with one adjustable shelf behind each door and metal pulls, unless other components are specified •Buffet Height Credenzas ship with two adjustable shelves behind each door and metal pulls, unless other components are specified •Back panel has ventilation cutout for each position. Cutout can accept optional fan if additional airflow is needed. •Metal finish defaults to pull finish when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. •Laminate with ABS Edge (-PE) only available with painted case option •Inset Laminate with Hardwood Edge (-P) only available with veneer case option • Unless specified otherwise, the color of the painted plinth and painted reveal will default to the color of the painted case on credenzas with laminate tops with ABS edge and painted case. •48”-96” credenzas ship in one piece; 120” credenzas will ship with two pieces for the case and one piece for the top Laminate with ABS Edge 372 Laminate with Hardwood Edge 1-1/4” 1-1/4” 1/2” 1/2” W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Performance Credenzas Utility Credenzas Components Model # FORTE Laminate Top Description Price Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) End Opening Component (only available in 1st and last positions) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers 810 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI Accessories FAN DF-GE 810 2224 606 1910 0 383 321 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component, one per location. B 2-Door Credenza A B C 3-Door Credenza A B C D A 4-Door Credenza B C D E 5-Door Credenza PA S S P O R T General Information: •Door on trash/recycling unit pulls out with bin •Trash/recycling units have a 41 qt. capacity • Maximum of 1 trash/recycling unit for a 2-Door Credenza, 2 trash/recycling units for both 3-Door and 4-Door Crendenzas, and 3 trash/recycling units for a 5-Door Credenza •Drawers and trash bin surround are painted Cloud •Labels are included with pull-out trash/recycling unit •Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Trash/recycling units are non-locking • OM-[ ] only available in Position B on 3-Door, 4-Door and 5-Door Buffet Height Credenzas, 33-7/8” H x 24”W x 24-3/4”D, adds 1” to the overall depth of the Credenza • Open module is intended for refrigeration unit (refrigerator not included) •48” - 96” Credenzs ship fully assembled; 120” credenzas will ship in 3 pieces, a 72” credenza, 48” credenza and a 120” long common top. •120”-L credenzas consists of a 72” and 48” credenza side by side with a common top. The 72” credenza will always be on the left side and the 48” credenza will always be on the right side. NEOS A PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 373 Performance Credenzas Utility Credenzas Glass Top Internal Width Utility Credenzas Internal Depth Internal Height Veneer Price Premium Veneer Gloss Glass Satin Glass Gloss Glass Satin Glass -VG -VS -PVG -PVS Model # W x D x H Description Conference Height PC-U-4829 PC-U-7229 PC-U-9629 PC-U-12029 48 x 24-3/4 x 29 72 x 24-3/4 x 29 96 x 24-3/4 x 29 120 x 24-3/4 x 29 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 23-7/16 23-7/16 23-7/16 23-7/16 6246 7682 9123 10445 6517 8016 9520 10900 6746 8297 9853 11281 7038 8657 10282 11772 Buffet Height PC-U-4837 PC-U-7237 PC-U-9637 PC-U-12037 48 x 24-3/4 x 37 72 x 24-3/4 x 37 96 x 24-3/4 x 37 120 x 24-3/4 x 37 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 30-1/8 30-1/8 30-1/8 30-1/8 7179 8837 10490 12012 7492 9221 10946 12534 7753 9544 11329 12973 8091 9959 11822 13537 PC-U-7229 PC-U-7237 Options: Locks: Add -L Integrated Pull: Add -IP Painted Plinth Base: Add -PBP Painted Reveal: Add -RP Painted Case: Add -PA $142 $272 for 48” Credenzas, $334 for 72” Credenzas, $397 for 96” Credenzas, $454 for 120” Credenzas No charge No charge Deduct $543 for 48” Credenza, $668 for 72” Credenza, $793 for 96” Credenza, $908 for 120” Credenza (from the Veneer case prices) REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish, if applicable • Choose Metal Finish for Pulls unless -IP is specified • Choose Paint Finish, if -PA, -RP or -PBP options are specified • Choose Components, if applicable (see next page) Integrated Pull (Optional) General Information: • Glass Tops are 1/4”-thick and sit on a 3/4” subtop •Conference Height Credenzas ship with one adjustable shelf behind each door and metal pulls, unless other components are specified •Buffet Height Credenzas ship with two adjustable shelves behind each door and metal pulls, unless other components are specified •Back panel has ventilation cutout for each position. Cutout can accept optional fan if additional airflow is needed. •Metal finish defaults to pull finish when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. •48”-96” credenzas ship in one piece; 120” credenzas will ship with two pieces for the case and one piece for the top •Subtop finish will match case finish 1/4” 3/4” 1/2” 374 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Performance Credenzas Utility Credenzas Components Model # FORTE Glass Top Description Price Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) End Opening Component (only available in 1st and last positions) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers 810 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI Accessories FAN DF-GE 810 2224 606 1910 0 383 321 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component, one per location. B 2-Door Credenza A B C 3-Door Credenza A B C D A 4-Door Credenza B C D E NEOS A 5-Door Credenza PA S S P O R T PERFORMANCE CREDENZA General Information: •Door on trash/recycling unit pulls out with bin •Trash/recycling units have a 41 qt. capacity • Maximum of 1 trash/recycling unit for a 2-Door Credenza, 2 trash/recycling units for both 3-Door and 4-Door Crendenzas, and 3 trash/recycling units for a 5-Door Credenza •Drawers and trash bin surround are painted Cloud •Labels are included with pull-out trash/recycling unit •Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Trash/recycling units are non-locking • OM-[ ] only available in Position B on 3-Door, 4-Door and 5-Door Buffet Height Credenzas, 33-7/8” H x 24”W x 24-3/4”D, adds 1” to the overall depth of the Credenza • Open module is intended for refrigeration unit (refrigerator not included) •48” - 96” Credenzs ship fully assembled; 120” credenzas will ship in 3 pieces, a 72” credenza, 48” credenza and a 120” long common top. •120”-L credenzas consists of a 72” and 48” credenza side by side with a common top. The 72” credenza will always be on the left side and the 48” credenza will always be on the right side. RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 375 Performance Credenzas Utility Credenzas Price Stone and Solid Surface Tops Solid Surface Stone Utility Credenzas Internal Width Internal Depth Internal Height Veneer Premium Veneer Veneer Premium Veneer Model # W x D x H Description Conference Height PC-U-4829 PC-U-7229 PC-U-9629 PC-U-12029 -SS-V -SS-PV -S-V -S-PV 48 x 24-3/4 x 29 72 x 24-3/4 x 29 96 x 24-3/4 x 29 120 x 24-3/4 x 29 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 23-7/16 23-7/16 23-7/16 23-7/16 6789 8350 9916 11354 7468 9185 10908 12489 7060 8684 10313 - 7766 9552 11344 - Buffet Height PC-U-4837 PC-U-7237 PC-U-9637 PC-U-12037 48 x 24-3/4 x 37 72 x 24-3/4 x 37 96 x 24-3/4 x 37 120 x 24-3/4 x 37 Two Doors Three Doors Four Doors Five Doors (2) 22-3/4 (3) 22-3/4 (4) 22-3/4 (5) 22-3/4 23-1/8 23-1/8 23-1/8 23-1/8 30-1/8 30-1/8 30-1/8 30-1/8 7804 9605 11403 13056 8584 10566 12543 14362 8116 9989 11859 - 8928 10988 13045 - PC-U-7229 Options: Locks: Add -L Integrated Pull: Add -IP Painted Plinth Base: Add -PBP Painted Reveal: Add -RP Painted Case: Add -PA PC-U-7237 $142 $272 for 48” Credenzas, $334 for 72” Credenzas, $397 for 96” Credenzas, $454 for 120” Credenzas No charge No charge Deduct $543 for 48” Credenza, $668 for 72” Credenza, $793 for 96” Credenza, $908 for 120” Credenza (from the Veneer case prices) REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish, if applicable • Choose Metal Finish for Pulls unless -IP is specified • Choose Paint Finish, if -PA, -RP or -PBP options are specified • Choose Solid Surface Color, if -SS-V or -SS-PV is specified • Choose Stone Color, if -S-V or -S-PV is specified • Choose Components, if applicable (see next page) Integrated Pull (Optional) General Information: • Solid Surface Tops are 1”-thick and Stone Tops are 2cm thick •Conference Height Credenzas ship with one adjustable shelf behind each door and metal pulls, unless other components are specified •Buffet Height Credenzas ship with two adjustable shelves behind each door and metal pulls, unless other components are specified •Back panel has ventilation cutout for each position. Cutout can accept optional fan if additional airflow is needed. •Metal finish defaults to pull finish when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. •48”-96” credenzas ship in one piece; 120” credenzas will ship with two pieces for the case and one piece for the top Solid Surface 1.0" 2cm .5" 376 W W W . N U C R A F T . C O M Stone .5" • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Performance Credenzas Utility Credenzas Components Model # FORTE Stone and Solid Surface Tops Description Price Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) End Opening Component (only available in 1st and last positions) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers 810 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI Accessories FAN DF-GE 810 2224 606 1910 0 383 321 REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component, one per location. B 2-Door Credenza A B C 3-Door Credenza A B C D A 4-Door Credenza B C D E 5-Door Credenza PA S S P O R T General Information: •Door on trash/recycling unit pulls out with bin •Trash/recycling units have a 41 qt. capacity • Maximum of 1 trash/recycling unit for a 2-Door Credenza, 2 trash/recycling units for both 3-Door and 4-Door Crendenzas, and 3 trash/recycling units for a 5-Door Credenza •Drawers and trash bin surround are painted Cloud •Labels are included with pull-out trash/recycling unit •Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Trash/recycling units are non-locking • OM-[ ] only available in Position B on 3-Door, 4-Door and 5-Door Buffet Height Credenzas, 33-7/8” H x 24”W x 24-3/4”D, adds 1” to the overall depth of the Credenza • Open module is intended for refrigeration unit (refrigerator not included) •48” - 96” Credenzs ship fully assembled; 120” credenzas will ship in 3 pieces, a 72” credenza, 48” credenza and a 120” long common top. •120”-L credenzas consists of a 72” and 48” credenza side by side with a common top. The 72” credenza will always be on the left side and the 48” credenza will always be on the right side. NEOS A PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 377 Performance Credenzas Food Service Credenzas Veneer Top with Hardwood Edge Pre-Configured PC-F-7237LR-2 U.S. Patent No. D610,829 Price Premium Veneer Veneer Double Sided Pull-Out Worksurface PC-F-7237LR-1 72 x 27-3/4 x 37 Left and Right-Hand Pull Out Worksurface with Drawers, Open Module and Front Pull-Out Trash Unit PC-F-7237LR-2 72 x 27-3/4 x 37 Left and Right-Hand Pull Out Worksurface with Drawers, Door with shelf and Front Pull-Out Trash Unit 15252 15252 16777 16777 Single Sided Pull-Out Worksurface PC-F-7237L-1 72 x 27-3/4 x 37 Left-Hand Pull Out Worksurface with Drawers, Open Module and End Opening Trash Unit PC-F-7237R-1 72 x 27-3/4 x 37 Right-Hand Pull Out Worksurface with End Opening Trash Unit, Open Module and Drawers PC-F-7237L-2 72 x 27-3/4 x 37 Left-Hand Pull Out Worksurface with Drawers, Door with Shelf and End Opening Trash Unit PC-F-7237R-2 72 x 27-3/4 x 37 Right-Hand Pull Out Worksurface with End Opening Trash Unit, Door without Shelf and Drawers 14042 14042 14042 14042 15446 15446 15446 15446 No Pull-Out Worksurface PC-F-7237-1 72 x 27-3/4 x 37 PC-F-7237-2 72 x 27-3/4 x 37 Drawers, Open Module and Front Pull-out Trash Unit Drawers, Door with shelf and Front Pull-out Trash Unit 12829 12829 14112 14112 Accessories FAN DF-GE Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit Model # W x D x H Description -V -PV 383 321 PC-F-7237L-2 Options: Locks: Integrated Pull: Painted Plinth Base: Painted Reveal: RK - Radius Knife 378 $142 $334 for 72” Credenzas No Charge No Charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish • Choose Metal Finish for Pulls • Choose Paint Finish, if -PBP or -RP options are specified • Choose Edge Profile (front edge top only): PC-F-7237-2 Integrated Pull (Optional) Add -L Add -IP Add -PBP Add -RP RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 7/8” deep wood edge band, veneered over •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Flip-up shelf is 10.5”d •Laminate sub top and pull-out worksurface is Formica Surf 923-58 •Optional pull-out worksurface adds an additional 22” of worksurface to each side •Flip-up shelf weight capacity: 25 lbs •Pull-out worksurface weight capacity: 45 lbs in center of shelf •Open module is intended for refrigeration unit (refrigerators are not included with Food Service Credenzas) •Metal finish defaults to pull finish on flip-up shelf and when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Credenzas ship fully assembled •Credenzas default to metal pulls •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Laminate Top Pre-Configured W x D x H U.S. Patent No. D610,829 Description Double Sided Pull-Out Worksurface PC-F-7237LR-1-P 72 x 27-3/4 x 37 Left and Right-Hand Pull Out Worksurface with Drawers, Open Module and Front Pull-Out Trash Unit PC-F-7237LR-2-P 72 x 27-3/4 x 37 Left and Right-Hand Pull Out Worksurface with Drawers, Door with shelf and Front Pull-Out Trash Unit Inset Laminate with Wood Laminate with ABS Edge & Veneer Edge & Painted Case Case -PE -P 13727 13727 14415 14415 Single Sided Pull-Out Worksurface PC-F-7237L-1-P 72 x 27-3/4 x 37 PC-F-7237R-1-P 72 x 27-3/4 x 37 PC-F-7237L-2-P 72 x 27-3/4 x 37 PC-F-7237R-2-P 72 x 27-3/4 x 37 Left-Hand Pull Out Worksurface with Drawers, Open Module and End Opening Trash Unit Right-Hand Pull Out Worksurface with End Opening Trash Unit, Open Module and Drawers Left-Hand Pull Out Worksurface with Drawers, Door with Shelf and End Opening Trash Unit Right-Hand Pull Out Worksurface with End Opening Trash Unit, Door without Shelf and Drawers 12638 12638 12638 12638 13271 13271 13271 13271 No Pull-Out Worksurface PC-F-7237-1-P 72 x 27-3/4 x 37 PC-F-7237-2-P 72 x 27-3/4 x 37 Drawers, Open Module and Front Pull-out Trash Unit Drawers, Door with shelf and Front Pull-out Trash Unit 11546 11546 12124 12124 Accessories FAN DF-GE Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit 383 321 $142 $334 for 72” Credenzas No Charge No Charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish, if applicable • Choose Metal Finish for Pulls • Choose Paint Finish, if -PBP, -PE or -RP options are specified • Choose Laminate • Choose ABS Edge Finish, if -PE is specified. • Choose Edge Profile, if -P is specified (front edge top only): RC - Reverse Convex OR - Knife SQ - Square RECYCLE CENTER General Information: •Tops are 1 1/4” thick with 7/8” deep wood edge band •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Flip-up shelf is 10.5”deep •Laminate sub top and pull-out worksurface is Formica Surf 923-58 •Optional pull-out worksurface adds an additional 22” of worksurface to each side •Flip-up shelf weight capacity: 25 lbs •Pull-out worksurface weight capacity: 45 lbs in center of shelf •Open module is intended for refrigeration unit (refrigerators are not included with Food Service Credenzas) •Metal finish defaults to pull finish on flip-up shelf and when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Credenzas ship fully assembled •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking •Laminate with ABS edge (-PE) option only available with Painted Case PERFORMANCE CREDENZA RK - Radius Knife Integrated Pull (Optional) Add -L Add -IP Add -PBP Add -RP PA S S P O R T PC-F-7237-2 NEOS PC-F-7237L-2 Options: Locks: Integrated Pull: Painted Plinth Base: Painted Reveal: KAI PC-F-7237LR-2 Model # Price FORTE Performance Credenzas Food Service Credenzas SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 379 Performance Credenzas Food Service Credenzas PC-F-7237LR Price Veneer Premium Veneer Three Doors with Left- and Right-Hand Pull-Out Worksurface 12535 13789 Single Sided Pull-Out Worksurface PC-F-7237[ ] 72 x 27-3/4 x 37 Three Doors with Single Sided Pull-Out Worksurface 11326 12459 No Pull-Out Worksurface PC-F-7237 72 x 27-3/4 x 37 Three Doors 10116 11128 Veneer Top with Hardwood Edge Build-Your-Own U.S. Patent No. D610,829 Model # W x D x H Double Sided Pull-Out Worksurface PC-F-7237LR 72 x 27-3/4 x 37 Description -V -PV [ ] Specify Left (L) or Right (R) Options: Locks: Integrated Pull: Painted Plinth Base: Painted Reveal: PC-F-7237-L Add -L Add -IP Add -PBP Add -RP $142 $334 for 72” Credenzas No Charge No Charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish • Choose Metal Finish for Pulls • Choose Paint Finish, if -PBP or -RP options are specified • Choose Edge Profile (front edge top only): PC-F-7237 RK - Radius Knife Integrated Pull (Optional) 380 RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 7/8” deep wood edge band, veneered over •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Build-Your-Own Credenzas come with adjustable shelves unless other components are specified •Flip-up shelf is 10.5”d •Laminate sub top and pull-out worksurface is Formica Surf 923-58 •Optional pull-out worksurface adds an additional 22” of worksurface to each side •Flip-up shelf weight capacity: 25 lbs •Pull-out worksurface weight capacity: 45 lbs in center of shelf •Metal finish defaults to pull finish on flip-up shelf and when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking. •Refrigerators are not included with Food Service Credenzas •Credenzas ship fully assembled •Credenzas default to metal pulls. W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T FORTE Performance Credenzas Food Service Credenzas U.S. Patent No. D610,829 Veneer Top with Hardwood Edge Components Model # Description Price 810 2224 606 1910 0 End Opening Component (only available in positions A and C - not available in same location as pull out worksurface) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers 810 Accessories FAN DF-GE 383 321 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component. B NEOS A C 3-Door Credenza PA S S P O R T General Information: • Door on trash/recycling unit pulls out with bin • Trash/recycling units have a 41 qt. capacity • Maximum of 2 trash/recycling units for a 3-Door Credenza • Drawers and trash bin surround are painted Cloud • Labels are included with rollout trash/recycling unit • Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Drawer fronts for refrigerated units and trash/recycling units are non-locking. PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 381 Performance Credenzas Food Service Credenzas U.S. Patent No. D610,829 Laminate Top Build-Your-Own PC-F-7237LR Model # W x D x H -PE -P Three Doors with Left- and Right-Hand Pull-Out Worksurface 11282 11846 Single Sided Pull-Out Worksurface PC-F-7237[ ] 72 x 27-3/4 x 37 Three Doors with Single Sided Pull-Out Worksurface 10193 10703 No Pull-Out Worksurface PC-F-7237 72 x 27-3/4 x 37 Three Doors 9104 9559 Double Sided Pull-Out Worksurface PC-F-7237LR 72 x 27-3/4 x 37 Description Price Laminate with Inset Laminate ABS Edge & with Wood Edge Painted Case & Veneer Case [ ] Specify Left (L) or Right (R) Options: Locks: Integrated Pull: Painted Plinth Base: Painted Reveal: PC-F-7237-L RK - Radius Knife 382 $142 $334 for 72” Credenzas No Charge No Charge REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) See pages 6-7 for surface material options. • Choose Wood Species & Finish, if applicable • Choose Laminate Finish • Choose ABS Edge Finish, if -PE is specified • Choose Metal Finish for Pulls • Choose Paint Finish, if -PBP, -RP, or -PE options are specified • Choose Edge Profile if -P is specified (front edge top only): PC-F-7237 Integrated Pull (Optional) Add -L Add -IP Add -PBP Add -RP RC - Reverse Convex OR - Knife SQ - Square General Information: •Tops are 1 1/4” thick with 7/8” deep wood edge band •Radius Knife (RK), Reverse Convex (RC) and Knife (OR) edge profiles add 1-7/8” to overall depth •Build-Your-Own Credenzas come with adjustable shelves unless other components are specified •Flip-up shelf is 10.5”deep •Laminate sub top and pull-out worksurface is Formica Surf 923-58 •Optional pull-out worksurface adds an additional 22” of worksurface to each side •Flip-up shelf weight capacity: 25 lbs •Pull-out worksurface weight capacity: 45 lbs in center of shelf •Metal finish defaults to pull finish on flip-up shelf and when painted plinth base or reveal is selected. If alternate finish is desired, note on order. •Locks, if selected, are centered above pull. Drawer fronts for refrigerated units and trash/recycling units are non-locking. •Refrigerators are not included with Food Service Credenzas •Credenzas ship fully assembled •Locks, if selected, are centered above pull and will default to Foil finish if metal color is not specified. Trash/recycling units are non-locking •Laminate with ABS edge (-PE) option only available with Painted Case W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T Laminate Top Components Model # FORTE Performance Credenzas Food Service Credenzas U.S. Patent No. D610,829 Description Front Opening Components TF-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers R1-[ ] Sliding equipment rack - 12RU with thermostatically controlled fan and plugstrip R2-[ ] Fixed equipment rack - 12RU with thermostatically controlled fan and plugstrip D3-[ ] Three drawers (behind one door) OM-[ ] Open Module to accept refrigerator (Refrigerator not included. Only Available in Center Position) Price 810 2224 606 1910 0 810 Accessories FAN DF-GE 383 321 Thermostatically controlled fan Drawer Fronts for GE Monogram refrigerated drawer unit KAI End Opening Component (only available in positions A and C - not available in same location as pull out worksurface) TE-[ ] Pull-out trash/recycling unit - (2) 41 qt. containers REQUIRED INFORMATION: (ORDER CANNOT BE ENTERED WITHOUT THIS INFORMATION) [ ] Specify location for each component. B NEOS A C 3-Door Credenza PA S S P O R T General Information: • Door on trash/recycling unit pulls out with bin • Trash/recycling units have a 41 qt. capacity • Maximum of 2 trash/recycling units for a 3-Door Credenza • Drawers and trash bin surround are painted Cloud • Labels are included with rollout trash/recycling unit • Thermostatically controlled fan activates automatically at 87˚ F and turns off at 85˚ F •Drawer fronts for refrigerated units and trash/recycling units are non-locking. PERFORMANCE CREDENZA RECYCLE CENTER SABER TA V O L A W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T 383 384 W W W . N U C R A F T . C O M • T O L L F R E E : 1 - 8 7 7 - N U C R A F T
Similar documents
SURFACE MAtERIAlS
and depth of finish, our collection of surface materials
comprises a sophisticated set of balanced elements that
supports your design vision.
Some elements have their roots in Nucraft’s rich herita...