front discharge rear discharge glider program

FRONT DISCHARGE
REAR DISCHARGE
GLIDER PROGRAM
MIXER TRUCKS
YOU DELIVER. SO DO WE.
Born from Midwestern producers, today’s Terex® Front Discharge Mixer (FDM) Trucks
are bred tough with new designs, features and quality components you requested to
deliver reliable operation. Built in America’s heartland by dedicated Terex craftsman
in our recently retooled Fort Wayne facility, the streamlined truck offering
includes six standard models to meet virtually any axle load
requirement, while maximizing payload.
40 YEARS OF INNOVATION
Terex FDM Trucks have led the industry with cutting-edge innovation and superior engineering that helps
improve your bottom line. Founded by several Midwest ready-mix producers more than 40 years ago, we
have a unique understanding of your needs.
We provide you with more standard features and a host of customized options that bring value to you
and your business. We combine our experience in the industry with input from our customers to manufacture mixer trucks that support you on the road to success.
Trust in the durable Terex FDM Trucks for the success of your ready mix operation, year after year.
Our
trucks feature a powerful 12-liter CNG engine and an integrated design approach that
can be ordered for the entire line of standard Front Discharge Mixer Trucks - from three to seven axles.
The
design mounts one Type-4 CNG tank to each side of the rear frame
Fast, simple removal of fuel tanks for engine maintenance
Provides a 75 diesel gallon equivalent (284 l) capacity
Delivers a lower center of gravity compared to other installations
Cuts the number of tanks, hoses and safety systems by 50%
Places all safety shut-off valves, fill ports and service items at ground level
AWARD-WINNING DESIGNS
Today’s Terex FDM Truck design is the culmination of an extensive, two-year customer feedback
program. You spoke, we listened…and delivered.
The new truck line boasts more than 100 design
updates you requested – including the drum, cab,
air and electrical systems, and drive train – to
improve truck productivity, efficiency and longevity.
The new design has producers noticing. More than
27,000 ballots were cast in the 2014 CONEXPOCON/AGG Innovation Award program and the new
Terex® FDM Truck was voted most innovative for the
Concrete Equipment category.
The CNG system eliminates much of the complexity that goes along with 2013 EPA-compliant diesel
engines, while reducing hydrocarbon emissions.
Our unique CNG tank mounting approach features a spherical
bearing design that…
Allows for tank length, diameter expansion/contraction
Compensates for frame flexing when driving off-road
Provides more versatility to your CNG truck versus the
rigid strap-mount designs of competitive tanks
LEAN MANUFACTURING
FACILITY
A new heart beats within the Terex Fort Wayne
manufacturing facility. What was once a job shop
is now a lean mixer truck producing machine.
Improved line flow, lean manufacturing principles,
upgraded paint processes and enhanced quality control measures are in place. This results in
shorter new truck lead times and ensures quality
trucks that will deliver years of dependable service with high availability rates.
QUALITY COMPONENTS
The redesigned Terex FDM truck begins with a solid foundation of
quality components – Cummins and MTU engines, Marmon-Herrington
and Meritor axles, and Allison transmissions – and adds a streamlined
model configuration with more than 100 design updates.
5th Generation electronic controls
in Allison automatic transmission
feature smart-control technology
to improve shifting performance
and increase fuel economy
MTU Series 1300 (DD 13) diesel
Redesigned stainless steel cab
engine features proven emissions
technology, extends maintenance
schedules, reduces fuel consumption and improves performance
reliability
o Additional 8.5 inches of legroom
o Isolator-mounted
o Brighter LED dome lights
o Enhanced visibility
o Improved ventilation
o Hanging brake and gas pedals
Improved mixer drum
performance/quality and
trunnion roller reliability
Diesel and CNG
engine options
120 psi water system
Increased wheel cut reduces
with heated manifold
Hydraulic tag axle
improves reliability
Standard aluminum
turn radius by up to 25%
Direct access to cab
fenders, water and fuel
tanks
STANDARD FDM MODELS AND...
STANDARD SPECIFICATIONS
FD4000/FD3000 (WITHOUT PUSHER AXLE)
ENGINE
11 YARD DRUM, 0" EXT
FDB4000
11 YARD HYGRADE DRUM, 9" EXT
350 hp / 1,350 ft-lb (261 kW / 1,830 nm)
350 hp / 1,450 ft-lb (261 kW / 1,965 nm)
400 hp / 1,450 ft-lb (298 kW / 1,965 nm)
380 hp / 1,450 ft-lb (283 kW / 1,965 nm)
385 hp / 1,450 ft-lb (287 / 1,965 nm)
385 hp / 1,350 ft-lb (287 kW / 1,830 nm)
450 hp / 1,550 ft-lb (336 kW / 2,102 nm)
425 hp / 1,550 ft-lb (317 kW / 2,102 nm)
350 hp / 1,450 ft-lb (261 kW / 1,965 nm)
Rated engine speed
1,800 rpm
2,100 rpm
1800 rpm
Oil capacity
10.4 gal (39.3 l)
11.3 gal (42.8 l)
11 gal (41.6 l)
FD4000B
11 YARD HYGRADE DRUM
9" EXT.
208.0 (17' 4")
FRONT AXLE
200.0 (16' 8")
358.0 (29' 10")
235.0 (19' 7")
379.0 (31' 7")
FD6000
11 YARD DRUM, 0" EXT
Cummins ISX12
HP & Torque options
FD4000
11 YARD DRUM, 0" EXT
FD5000
MTU Series 1300 (DD13)
“MICHIGAN STRETCH”
11 YARD HYGRADE DRUM, 9" EXT
FD6000 MS
11 YARD HYGRADE DRUM
9" EXT.
FD5000GL
11 YARD DRUM, 0" EXT
HYDRAULIC SYSTEM
Marmon-Herrington MT22
Meritor MX23160
22 gal (83.3 l) hydraulic reservoir
Capacity
22,000 lbs (9,979 kg)
23,000 lbs (10,433 kg)
Reservoir priority system (steering priority)
Inside wheel cut
42°
35°
Superior filtration 10 micron absolute / Beta 200
Approx. weight
2,050 lbs (930 kg)
2,194 lbs (995 kg)
Flooded pump inlets with positive pressure & no filter restrictions
Gear reduction
Double reduction
(small center bowl)
Single reduction
(large center bowl)
Electric slump gauge – keeps hydraulics out of the cab
Ratio
5.38:1
5.38:1
Overall width
95 in (241.3 cm)
93 in (236.22 cm)
Driver controlled
differential lock
Optional
Optional
TRANSMISSION
Allison 4500 RDS - Wide Ratio – 6 speed automatic
Ratios – 1st 4.7:1 2nd 2.21:1 3rd 1.53:1 4th 1.00:1 5th 0.76:1 6th 0.67:1
Reverse - 5.55:1
230.0 (19' 2")
197.0 (16' 5")
307.0 (25' 7")
276.0 (23')
11 YARD DRUM, 9" EXT
206.0 (17' 2")
359.0 (29' 11")
201.0 (16' 9")
391.0 (32' 7")
403.0 (33' 10")
Steering pump, with integrated flow & pressure controls
CAB
Stainless steel construction
Hanging brake & throttle pedals
CAN Bus & 100% environmentally sealed gauges
DRUM
Shift energy management system
Dual shifter option – Shift F-N-R from the chute hydraulic joystick
FDB7000
11 YARD DRUM, 9" EXT
FD6OOOB
11 YARD DRUM, 9" EXT
Hydrostat pump 5.4 CID - power limiters, pressure filter
565 hp - 1,770 ft-lb (421 kW) / 2,400 nm) torque (maximum capacity)
TC-521 Torque converter = 2.42 stall torque
11 YARD DRUM, 9" EXT
Oversized Modine cooler
FMVSS tested
Allison Prognostics system
FDB7000
Terex Total Control System with transmission control
Load based shift schedule
Deep oil sump with 48 quarts of TranSynd synthetic oil.
FDB6000
Cummins ISX-12G
Nose section
3/16 in (0.48 cm) AR230
Remaining sections
3/16 in (0.48 cm) AR400
Discharge fins
3/16 in (0.48 cm) AR230
Mixing fins
1/4 in (0.64 cm) AR230
GLIDER TRUCKS
RDM TRUCKS
Standard or Bridgemax. Three- to seven-axle.
Terex offers Rear Discharge Mixer (RDM) Truck
designs with features typically found only on Front
Discharge models to make your deliveries quicker,
easier and more efficient.
Most truck functions are controlled inside
the cab to increase operator efficiency.
Our certified pressure vessel 120 PSI
(8.3 bar) water tank delivers faster
clean-up than competitive truck tanks.
Four-point attachment with spring-loaded
pedestal mounts allows mixer mounting
brackets to flex to boost frame service life.
Conventional or twin-steer front axle, any make or
model, you pick the chassis, and we do the rest.
Our rear discharge mixer trucks are backed by the
same high quality service, support and experience
offered with our front discharge mixer designs.
10, 10.5, 11, 12 and 14 yd3
(7.6, 8, 8.4, 9.2 and 10.7 m3)
drum mixer options
Inside-the-cab driver controls:
o Drum start-stop, mixing direction and speed
o Discharge chute raise/lower and position lock
o Air-flip hopper
o Working lights
o Air-flip hopper position warning light
Save money and bring new life to aged mixer trucks in your fleet with the Terex® Glider Truck Program.
Regardless of whether you have a Terex truck or another brand, we offer an array of component and system options, including the addition of auxiliary axles, to update worn-out mixer trucks and meet changing
market conditions. Ship the entire truck or just the components to our Fort Wayne factory. All viable components are prepped and upgraded for installation.
42" (107 cm) standard,
46" (117 cm) optional,
high performance
drum opening
Glider trucks are sent down the same factory line and assembled by the same craftsmen who build new
front discharge mixer trucks, so you’ll receive the same high quality you expect from Terex.
We can also assist you by refurbishing just select components or provide you with box-frame change
outs and multiple glider kit options, so you can do the work yourself.
Save up to 40% versus the cost of a new truck with the Terex Glider Truck Program.
Standard lightweight aluminum fenders
increase payload capacity
Conventional or twin-steer front axle
FACTORY DIRECT SUPPORT
For more than 40 years, Terex has supported our
ready mix customers with innovative designs,
market-leading features and long-lasting front
and rear discharge trucks. When it’s time for truck
maintenance, we provide factory-direct technical,
service and parts support – day or night, seven
days a week.
When your truck has reached the end of its first
useful life, our Glider Truck Program gives you a
like-new truck at a fraction of the cost. Front or
rear discharge, new or Glider, You can count on
Terex ready mix concrete trucks to keep you on
the road to profitability.
Terex Corporation
7727 Freedom Way
Fort Wayne, IN 46818
(260) 497-0727
(800) 433-6619 (parts line)
terex.com/construction
Effective Date: July 2014. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this
equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and
sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. © 2014 Terex Construction. Terex, the
Terex Crown design, and Works For You are trademarks of Terex Corporation or its subsidiaries. All other trademarks are property of their respective owners.
MIXER TRUCKS 0814 PN 42