Fabrication Section

Transcription

Fabrication Section

FABRIC ATION
37
FABRICATION
Chemicals
Adhesives...................................................... 39
Thinner and Adhesive Remover.................. 45
Resin and Acetone....................................... 47
Catalyst and Promoter................................. 51
Extender and Filler....................................... 52
Rigid and Flexible Foam.............................. 53
Parting Agents and Lubricant..................... 55
Elastomer...................................................... 57
Sealant.......................................................... 60
Cosmetic Skin and Pigment......................... 61
Decorative
Full Sheet Transfers...................................... 63
Individual Transfers...................................... 68
Fabrics, Tape and Webbing
PrePreg Fabrication Products...................... 72
Fiberglass and Carbon Cloth....................... 72
Tape............................................................... 73
Webbing....................................................... 74
Elastic............................................................ 76
Rubber Sheets.............................................. 77
Fasteners
Buckles and Hooks....................................... 78
Loops and Rings........................................... 80
Chafes and Ring Tabs................................... 81
Hook and Loop............................................. 83
Prefabricated Straps.................................... 87
AFO Pads....................................................... 91
Rivets, Burrs and Washers........................... 91
Screws........................................................... 96
Metal Goods
Bar and Band Stock...................................... 97
Sheet Goods
Sheet Good Swatch Ring............................. 99
QuikStrip® Wheels........................................ 99
Cork............................................................... 99
Soling.......................................................... 101
Foam Sheets............................................... 106
Fabric Covered Sheets.................................116
Dual Laminates............................................118
Tri Laminates.............................................. 120
Blockers....................................................... 122
Prosthetic Cones......................................... 123
Finishing Foam........................................... 123
Thermoplastics........................................... 124
Leather and Vinyl....................................... 130
Padding Materials
Padding Materials...................................... 134
Felt and Sheepskin..................................... 135
Gel Sheets................................................... 136
Supplies
Dispensers and Applicators....................... 137
Gloves and Aprons..................................... 138
Safety Equipment...................................... 140
Adhesive Tape............................................ 141
General Supplies........................................ 143
The Largest Independent O&P Distributor
38
FABRIC ATION
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
FABRIC ATION
Chemicals
39
ADHESIVES
a.
+PLUSeries® Adhesives
Description
220 ml
25-Second
60-Second
90-Second
FABRICATION
+PLUSeries® structural urethane adhesive is a versatile and fast two-part urethane system used for bonding
and repairing plastics, composites, aluminum, steel, plaster and much more. Since it’s a structural adhesive,
it is exceptionally stronger than brittle, fracture prone acrylics. +PLUSeries® Composite Adhesive is a twopart black pigmented urethane adhesive designed for structural bonding of today’s performance composite
sockets and bracing systems. Combined at a 1:1 ratio like our other +PLUSeries products, it has a working
time of one minute and achieves full cure in 15 minutes at room temperature.
CA-1
25SL 60SL90SL C1L
50 ml
25SS 60SS90SS C1S
G220
G50
127216
169506
b.
+PLUSeries® Dispensing Gun, 220 ml
+PLUSeries® Powder Promoter, 50 ml
Mixing Tips, 220 ml, 6/Pkg
Mixing Tips, 50 ml, 6/Pkg
3M™ Hi-Strength 90 Spray Adhesive
A high-strength, contact-type adhesive that bonds most wood, particle board, metal, laminate, SBR rubber
and many plastics including polyethylene and polypropylene. Not recommended for unsupported, flexible
vinyl. Dries in one minute. 16.25 oz can.
Item No. ð
3MSA-90
c.
3M™ Instant Adhesive CA4
One-part, high-strength, fast-setting, multi-purpose cyanoacrylate adhesive. Cures at room temperature.
Economical to use because generally only drops are needed to develop strong bonds to many metals, plastics
and rubber. 1 oz bottle.
Item No. ð
CA4-1OZ
d.
3M™ Scotch-Weld™ Urethane Adhesive
Two-part urethane adhesive kit. Cures at room temperature or with heat to produce impact-resistant, high
peel strength bonds on primed or painted metal and plastics. Sold kit.
Description
2 oz
Quart
Item No. ð
SWUA-2OZSWUA-Q
40
Chemicals
Fabric ation
ADHESIVES — Continued
FABRICATION
a.
3M™ Super 77 Spray Adhesive
An industrial grade aerosol adhesive for exceptionally fast secure bonds. This aerosol gives you high coverage
(over 160 square feet per can), fast aggressive tack, and lower soak-in time. Ideal for foils, cloth, cardboard,
foams, paper, carpeting and more. Super 77 bonds in 15 seconds, has low VOCs and does not contain ozonedepleting CFCs. 16.5 oz can.
Item No. ð
3MSA-77
b.
Barge Rubber TF Cement
Temporary bonding agent for rubber, cork, paper, fiber materials and particle board. Toluene-free. Dry time:
5 minutes. Open time; 10-20 minutes. Dry time: 5 minutes. Open time: 10-20 minutes. Sold quart or gallon.
From Quabaug Corporation.
Unit
Quart
Gallon
Item No. ð
DA025DA020
c.
Barge Super Bond™ Fast-Dry TF Cement
Outstanding bond on leather, rubber, heel lining, patches, wood, aluminum, steel, fabrics, glass, etc. Toluenefree. Waterproof, flexible and non-smearing. Dry time: 10 minutes. Open time: up to 4 hours. Sold gallon.
From Quabaug Corporation.
Item No. ð
DD001
d.
Barge Original Formula All Purpose Cement
Fast drying and strong enough for even the heaviest materials. Sold quart or gallon. From Quabaug Corporation.
Description
Quart
Gallon
Item No. ð
BC-QBC-G
e.
Barge Original Formula Rubber Cement
Sold quart or gallon.
Description
Quart
Gallon
Item No. ð
RC-QRC-G
FABRIC ATION
f.
Chemicals
41
Colle de Cologne
Renia Cements of Germany has been producing adhesives for over 70 years and is unique in that they only
produce adhesives for the shoe repair, prosthetic and orthopedic markets. Colle de Cologne is their all purpose cement. Sold quart or gallon.
FABRICATION
Description
Quart
Gallon
Item No. ð
CDC-QCDC-G
g.
Coyote Quick Adhesive
Used to attach the Summit Lock™ to a liner, and to glue the LowPro Summit Lock™ to the socket. Can also be
used for fabrication of the Suction Lock, Air-Lock, Grommet™ Lock and Integrator™. Also used to reinforce
socks used with pin locks, repair sockets and in place of any other epoxy or gunk. Sets fast, doesn’t smell and
doesn’t sag for buildups. From Coyote Design.
Description
20cc
50cc
180cc
Cartridge
CD4120CD4150 CD4180
Dispenser
CDDMA51CDDMA180
CD401Mix Tips for 20cc and 50cc cartridges, 6/pkg
CD402
Mix Tips for 20cc and 50cc cartridges, 20/pkg
CD410
Mix Tips for 180cc cartrides, 12/pkg
h.
Coyote Fast Set Silicone
Fast Set Silicone can be used in a variety of ways, for applications that are more suited for a softer, more
flexible material than Coyote Quick Adhesive. It is fast setting, and easy to use, and is the same size, using
the same dispenser and tips as the 180cc Quick Adhesive. 40 durometer. Work Time: 30 seconds. Sets in 1
minute. From Coyote Design.
Item No. ðCD5180
CD410
Mix Tips for 180cc cartridges, 12/pkga
i.
Epibond® 1217-A/B
A fast setting high-strength two-part epoxy adhesive formulated for joining steel, aluminum, wood, ceramics and plastic substrates. 4-8 minute working time. Cures in less than two hours at room temperature.
Translucent white. Sold quart kit.
Item No. ðEPB-Q
j.
Poly Adhesive
For Pe-Lite®, polypropylene and polyethylene. Sold quart. From Fillauer.
Item No. ð199455
42
Chemicals
Fabric ation
FABRICATION
a.
GP Atom Flexible Glue
Cyanoacrylate adhesive. 50g bottle. Sold each.
Item No. ð
GP-AT50
b.
KISS® Adhesive
This specially formulated, flexible, ultra quick drying adhesive is used to attach both the Proximal Placard
when attaching by Adhesive, and the KISS® BK One Way Expulsion Valve. Contains 20+ applications.
Item No. ð
CMP11/A
c.
Loctite® 242 Threadlocker Blue
Locks threaded fasteners against vibration loosening. Ideal for nut and bolt applications 1/4” to 3/4” (6mm
to 20mm). Prevents threads from rusting and leaking. Removable with hand tools for easy disassembly. Temperature range: -65° to 300° F (-54° to 149° Celsius).
Description
10ml Tube
1.69 Fl oz
Item No. ð
2422124231
d.
Loctite® 271 Threadlocker Red
Designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the
absence of air between close-fitting metal surfaces. It protects threads from rust and corrosion and prevents
loosening from shock and vibration. It is only removable once cured by heating up parts to 500°F (260°C).
Item No. ð27-41540
FABRIC ATION
e.
Chemicals
43
Master Cement
Sold Gallon.
Description
Quart
Gallon
FABRICATION
Item No. ð
MC-QMC-G
MAT-GMaster Cement Thinner, Gallon
f.
Master Clear All Purpose Cement
Sold gallon.
Item No. ðMAC-G
MAT-GMaster Cement Thinner, Gallon
g.
Ortec Cement
Dries clear. Stays flexible. Sold quart or gallon. From Renia.
Description
Quart
Gallon
Item No. ð
OC-QOC-G
h.
PM Liner Adhesive #66
Sold pint.
Item No. ðPMLA-66
i.
Poly Adhesive
Clear, solvent-based, synthetic rubber adhesive. Adheres to metal and plastics including polypropylene and
linear polyethylene. Outstanding bond strength. Good resistance to water and aging. From 3M Company.
Description
Item No.ò
7.5 Ounce Can with Brush
PA-75
Quart
PA-Q
Gallon
PA-G
PAT-GPoly Adhesive Thinner, Gallon
44
Chemicals
Fabric ation
FABRICATION
a.
ProFormance 88 Clear Cement
Sold gallon.
Item No. ðPCA-88-100
b.
ProFormance Adhesive
Cyanoacrylate adhesive. 2 oz bottle. Sold each.
Description
Item No.ò
Gel
PF-CA2OZ-GEL
Standard
PF-CA2OZ-STD
Super Thin
PF-CA2OZ-TH
PF-ACT2OZProFormance Activator, 2 oz.
c.
ProFormance Activator
For use with ProFormance adhesive products. 2 oz bottle with spray applicator. Sold each.
Item No. ðPF-ACT2OZ
d.
Renew Silicone Adhesive
Designed specifically for bonding RTV silicone rubber to silicone rubber and other substrates including urethane, plaster and fabrics. Working time: 5 minutes. Fully cures in 15 minutes. Translucent. May be colored
with silicone pigment. 3 oz tube. Sold each.
Item No. ð
95320A
e.
Stabond Adhesive
Gallon. Sold each.
Item No. ð
SA-G
SAT-GStabond Adhesive Thinner, Gallon
FABRIC ATION
f.
Chemicals
45
Zap-A-Gap CA+ Adhesive
Cyanoacrylate adhesive. Gap filling formula bonds virtually anything: wood, veneers, cork, rubber, leather,
plastics and metal. Can be used under or over paint. Thicker than generic superglues, it drips less and dries
quickly. 2 oz bottle.
FABRICATION
Item No. ð
ZAP-2OZ
g.
Zip Kicker
Zap-A-Gap accelerator. Rapidly accelerates the drying time of Zap-A-Gap and other superglues. Just a little
squirt of Zip Kicker and the glue sets in seconds. Includes screw-on pump. 2 oz bottle.
Item No. ð
ZIP-2OZ
THINNER and ADHESIVE REMOVER
h.
3M™ Solvent
Removes poly adhesive or contact cement. Sold quart or gallon. From 3M Company.
Description
Quart
Gallon
Item No. ð
PAT-Q
PAT-G
i.
Barge All Purpose Thinner
Sold quart or gallon. Sold each.
Description
Quart
Gallon
Item No. ð
BAT-Q
BAT-G
46
Chemicals
Fabric ation
THINNER and ADHESIVE REMOVER — Continued
FABRICATION
a.
Master All-Purpose Cement Thinner
Gallon. Sold each.
Item No. ð
MAT-G
b.
Master Multi-Purpose Thinner
For use with Ortec cement. Gallon. Sold each.
Item No. ð
MAS-150
c.
Poly Adhesive Solvent
Quart. Sold each.
Item No. ð
199463
d.
ProFormance® #88 Thinner
Gallon. Sold each.
Item No. ð
PCT-88-100
e.
Stabond Adhesive Thinner
Gallon. Sold each.
Item No. ð
SAT-G
FABRIC ATION
Chemicals
47
RESIN and ACETONE
f.
COE® Tray Plastic
Component
1 lb Kit
Fast Set
3 lb Kit
Fast Set
3 lb Kit
Regular Set
Powder
Only
Set Time
10 Min
10 Min
Kit
240111240113240013
N/AN/AN/AN/A
15 Min
Liquid Only Liquid Only
Fast Set Regular Set
10 Min
COE-SEP
FABRICATION
A self-curing acrylic resin. Powder and liquid mix in seconds to produce a smooth dough that can be easily
manipulated. Will not warp or pull away from the cast during polymerization. Grinds easily. Complete 3 lb
kit includes 3 lb powder, 1 pint liquid and two 2 oz bottles of COE-SEP tinfoil substitute.
15 Min
1 lb Bag
N/A
N/A
240016
N/AN/AN/A
3 lb Bag
N/A
N/A
240014
N/AN/AN/A
Gallon N/AN/AN/A
240194240094343593
Quart N/AN/AN/A
240193240093345592
Pint N/AN/AN/A
240192240092N/A
6 oz N/AN/AN/A
240191240091N/A
2 oz N/AN/AN/AN/AN/A
343591
g.
Epox-Acrylic Resin
An epoxy acrylic resin with an optimized molecular weight which gives a lower viscosity than competing
products. This low viscosity along with a decreased surface tension creates a resin with unprecedented fiber
wet out that allows you to get the most out of your laminations. Sold gallon. From Acsys Orthopedic.
Item No. ð
EAR1
h.
Epox-Acrylic Resin
Includes one tube catalyst (CA1). Sold gallon. From Foresee.
Item No. ð
EA1
CA1
Catalyst Cream Hardener, 4 oz Tube
48
Chemicals
Fabric ation
RESIN and ACETONE — Continued
FABRICATION
a.
MEK (Methyl Ethyl Ketone)
Gallon. Sold each.
Item No. ð
MEK-G
b.
Orthocryl® Flexible Resin
Formulated for flexible laminates , Orthocryl® Flexible Resin is a colorless, transparent two-component resin
with a methylmethacrylate base. The cured laminates are non-irritating to the skin. They have excellent
strength and are thermoplastic, thus may be heated and reshaped. Sold each.
Description
4.6 kg
Item No. ð
617H17=4.600E
0.9 kg
617H17=0.900E
c.
Orthocryl® Lamination Resin
Formulated for rigid laminates, Orthocryl® Lamination Resin is a colorless, transparent two-component resin
with a methylmethacrylate base. The cured laminates are non-irritating to the skin. They have excellent
strength and are thermoplastic, thus may be heated and reshaped. (80:20). Sold each.
Description
4.6 kg
Item No. ð
617H19=4.600E
0.9 kg
617H19=0.900E
d.
C-Orthocryl® Lamination Resin
Formulated for use with carbon fiber, C-Orthocryl® Lamination Resin is a colorless, transparent two-component
resin with a methylmethacrylate base. The cured laminates are non-irritating to the skin. They have excellent
strength and are thermoplastic, thus may be heated and reshaped. Sold each.
Description
4.6 kg
Item No. ð
617H55=4.600
0.9 kg
617H55=0.900
e.
Orthocryl® Sealing Resin
Formulated for sealing, strengthening and adhering, Orthocryl® Sealing Resin is a colorless, transparent twocomponent resin with a methylmethacrylate base. The cured laminates are non-irritating to the skin. They
have excellent strength and are thermoplastic, thus may be heated and reshaped. Sold each.
Description
4.6 kg
Item No. ð
617H21=4.600E
0.9 kg
617H21=0.900E
FABRIC ATION
f.
Chemicals
49
Orthocryl® Lacquer
For sealing wet plaster casts and to lacquer sanded laminate surfaces. Clear. 0.95 kg. Sold each.
FABRICATION
Item No. ð
635L12
g.
Orthocryl® Putty
For setting joints in wood and plastic sockets. Sold each.
Item No. ð
636K7=1
h.
Light Putty
For setting various parts. Especially suited for wood and plastic. Advantages: lightweight, fast-setting, good
adhesion, easy to grind. Can be colored with pigment paste. Sold each.
Item No. ð
636K17=0.960
i.
Sealing Resin Paste
Sold each.
Item No. ð
636K18
j.
P&O Polyester Resin
Product is based on Ashland Chemical’s original polyester resins, same (original) polymer and adjusted to the
same (original) specs as Ashland’s polyester resins that are no longer being blended by Ashland Chemical.
Gallon. Sold each.
Item No. ð
PRR-G
50
Chemicals
Fabric ation
RESIN and ACETONE — Continued
FABRICATION
a.
ProFormance® Modified Acrylic Resin
Provides the physical properties of epoxy resin with the ease of polyester resin for superior flexural fatigue
endurance and excellent adhesion. Thinner than standard acrylic resin for easy application and better wet
out. Gallon. Requires Cream Hardener (not included).
Description
Item No.ò
PF-MARG
Modified Acrylic Resin, One Gallon
CH-MARCream Hardener, 4 oz Tube
b.
ResTech Epoxy Resin
Epoxy lamination system. Sold gallon kit.
Item No. ð
RES-1
c.
Rapidcure Acrylic
Sold kit. From Fillauer.
Description
1/4 lb Kit
1 lb Kit
5 lb Kit
Item No. ð
199547199554 199562
d.
SPT Composite Matrix Resin
Modified epoxy acrylic resin designed to complement carbon and fiberglass composite materials. Easy to
work with, during and after lamination. Gallon. Requires Powder Promoter (not included).
Description
Item No.ò
Composite Matrix Resin, One Gallon
CMR-G
CMR-PP080
Powder Promoter, 80g
CMR-PP160 Powder Promoter, 160g
FABRIC ATION
e.
Chemicals
51
Ultraflex Plastic Adhesive
Sold each.
FABRICATION
Item No. ð
636W17
f.
Acetone (Dimethyl Ketone)
Gallon. Sold each.
Item No. ð
DMK-G
CATALYST and PROMOTER
g.
Cream Hardener
A premium quality catalyst designed for use with polyester filler products. Bright white color does not significantly change the color of resin. 4 oz tube.
Item No. ð
CH-MAR
h.
Paste Catalyst
1 lb jar.
Description
Item No.ò
ATC Paste Catalyst
ATC-1LB
BPO Paste Catalyst
BPO-1LB
52
Chemicals
Fabric ation
CATALYST and PROMOTER — Continued
FABRICATION
a.
Hardening Paste
Sold each.
Description
0.028 kg
0.15 kg
Item No. ð
617P14=0.028617P14=0.15
b.
Hardening Powder for Orthocryl® Resin
0.15 kg. Sold each.
Item No. ð617P37=0.150
c.
SPT Composite Matrix Resin Powder Promoter
For use with SPT Composite Matrix Resin (page 50).
Description
80g
160g
Item No. ð
CMR-PP080CMR-PP160
EXTENDER and FILLER
d.
Glass Bubbles
A fine, lightweight powder added to polyester and epoxy resins as an extender. White.
Description
3 lb Bag
5 lb Bag
Item No. ð
C15-3LBC15-5LB
FABRIC ATION
e.
Chemicals
53
Solka-Floc®
Solka-Floc® powdered cellulose is white, odorless and has varying particle sizes.
Description
1 lb Bag
5 lb Bag
FABRICATION
Item No. ð
SF-1LBSF-5LB
f.
Vermiculite #3
HAZMATPAC vermiculite is tested and certified as asbestos-free. 4 cubic feet. Sold bag.
Item No. ð855015
RIGID and FLEXIBLE FOAM
g.
FOAM-IT!™ Rigid Polyurethane Foam
A two-part rigid foam that is versatile and easy to use. Parts A and B are mixed in equal amounts by volume.
Mixture will expand and develop a uniform cell structure. Foam becomes tack free in about 4 to 6 minutes,
develops handling strengths in 20 minutes and fully cures in 2 hours. Sold kit. From Smooth-On.
Cubic Foot Density
5 lb
10 lb
15 lb
Description
Gallon Kit
Gallon Kit
Pint Kit
Item No. ð
RFK05RFK10 RFK15
h.
Durathane Foam Kit
Gallon. Sold each. From Hosmer.
Item No. ð54050
54
Chemicals
Fabric ation
RIGID and FLEXIBLE FOAM — Continued
FABRICATION
a.
Kingsley Rigid Foam
Specially formulated for prosthetic and orthotic use. Volume increases 6.5 times.
Component
Quart Kit
Complete
Gallon Kit
Complete
Part A
Quart
Part A
Gallon
Part B
Quart
Part B
Gallon
Item No. ð
P98/34QK P98/34GK P34-846-QP34-846-GP98-317-Q P98-317-G
b.
Pedilen Rigid Foam 200
Designed for average weight-bearing devises, Pedilen Rigid Foam 200 combines two synthetic components
to create rigid foam which can be used on thin-walled synthetic sockets. Hand mixes quickly and safely. Once
hardened, the foam is lightweight and can be worked like wood. Volume increase: 6.5 times. Sold each.
Description
0.865 kg
4.6 kg
Item No. ð
617H12=0.865617H12=4.600
c.
Pedilen Duplicating Plastic
Ideal for quick and accurate socket duplications, Pedilen Duplicating Plastic combines two synthetic components to create rigid foam which can be used on thin-walled synthetic sockets. Even undercuts will be preserved intact. Hand mixes. Once hardened, the foam is lightweight and can be worked like wood. Sold each.
Description
0.865 kg
4.6 kg
Item No. ð
617H37=0.865617H37=4.600
d.
Hardener for Pedilen Duplicating Plastic
Pedilen combines two synthetic components to create rigid foam which can be used on thin-walled synthetic
sockets for controlled alignment of parts, static or dynamic. Pedilen can be hand mixed quickly and safely.
Once hardened, the foam is lightweight and can be worked like wood. Sold each.
Description
0.865 kg
4.6 kg
Item No. ð
617P21=0.865617P21=4.600
e.
Footshell Foam Kit
From Ottobock. Sold each.
Description
Single Application
Gallon Kit
Item No. ð
SL=P071SL=P075
FABRIC ATION
f.
Chemicals
55
Renew Rigid Foam 10
A versatile, easy-to-use 10 lb density urethane foam. Mixture expands roughly 6 to 8 times original volume
and develops a uniform cell structure. Tack-free in approximately 10 minutes. Working time: 1.5 minutes;
cure time: 2 hours. Off-white. Sold kit.
Pint Kit
Gallon Kit
5 Gallon Kit
47131
FABRICATION
Description
Item No. ð
47111-S247121
PARTING AGENTS and LUBRICANT
g.
Dow Molykote Silicone Spray
283g. Sold each.
Item No. ð
316AER
h.
Dow Corning® 4 Electrical Insulating Compound
Silicone-based compound provides moisture barrier. 5.3 oz tube. Sold each.
Item No. ð
DC4
i.
Petroleum Jelly
15 oz tub. Sold each.
Item No. ð
PJ-100
56
Chemicals
Fabric ation
PARTING AGENTS and LUBRICANT — Continued
FABRICATION
a.
Plaster Parting Agent Cream
Sold each.
Description
1 kg
4.5 kg
Item No. ð
640Z5=1640Z5=5
b.
Renew Ease Release
12 oz aerosol can or 2 oz spritzer bottle. From Smooth-On.
Description
Aerosol
Spritzer
12 oz
2 oz
Item No. ð
70020A71282
c.
Silicone Spray Mold Release
3% formula. Use as parting agent or lubricant. Ideal for paper transfers. 9.25 oz aerosol can. Sold each.
Item No. ð
199026
d.
Slide Silicone Mold Release
Environmentally safe. CFC-free. Chlorine-free. Biodegradable. Non-toxic. Non-flammable (when used as directed). Colorless and non-staining. Maximum operating temperature: 600° F. 12 oz aerosol can. Sold each.
From Slide Products.
Item No. ð
44312
e.
Sprayon Premium Silicone Lube
6.6% silicone formula. Wide temperature range. 10 oz aerosol.
Item No. ð
SILUB-66
FABRIC ATION
f.
Chemicals
57
WD-40®
Known as “the can with thousands of uses,” WD-40 ® protects metal from rust and corrosion, penetrates stuck
parts, displaces moisture and lubricates just about anything. WD-40 is also great when it comes to cleaning
grease, grime, and other marks from most surfaces. 8 oz can. Sold each.
FABRICATION
Item No. ð
WD-40
ELASTOMER
g.
A-2370 Prosthetic Foam
A liquid silicone polymer which, when catalyzed, rapidly yields a low density silicone rubber foam. 1 lb kit
contains base and 1 oz of catalyst.
Item No. ð
A-106
h.
Ipocon® 7
Mixing ration: 7 parts Component A to 1 part Component B or B-quick. Non-hazardous. Components sold
separately.
Component
A
A
Silicone
Silicone
Unit
2,000g
500gm
B
B-Quick
Curing Agent Curing Agent
200g
200g
Item No. ð MG106 MG107 MG108-1MG108-2
i.
PQ Liquid Polymer
Sold kit.
Item No. ð941
941-HHardener (Blue) only
58
Chemicals
Fabric ation
ELASTOMER — Continued
FABRICATION
a.
PediPlast® Moldable Footcare Compound
PediPlast™ is a silicone compound that lets you fabricate soft, yet durable, customized digital appliances in
less than five minutes. You’ll make toe cushions, straighteners, separators or protectors to treat almost any
forefoot condition, including hammer toes, overlapping toes, corns, bunions, even replace amputated digits.
Just mix the putty-like compound with the curing agent and mold it directly to the patient’s foot. After a few
minutes, the material will harden into its permanent form, ranging from soft to firm, based on the amount
of curing agent added. No odors or mess. Non-toxic. Hypoallergenic. No refrigeration or special handling
necessary. Cut or grind finished devices to make additional alterations. Sold kit.
Description
Item No.ò
PediPlast Advanced Moldable Footcare Compound
8000
PediPlast® Advanced Moldable Footcare Compound with (3) Catalyst Tubes, 250g
8001
®
b.
Quick-Sil
A dual cartridge injection system provides a custom layer of Super Soft 2 Shore A blue silicone, skin compatible,
viscoelastic silicone. Sets in 5 minutes. Water permeable for dispersal of moisture. Non-hazardous. Starter kit
(pictured) includes cartridge, mixing gun, static mixers, Quick-Prime Kit and Fix-Sil silicone adhesive.
Description
50ml System
330ml System
Starter Kit
55/1250-00555/1250-033
55/1251-05055/1251-330
Replacement Silicone Cartridges
Static Mixers
55/1251-05155/1251-331
Mixing Gun
50/1251-01155/1251-332
55/1251-440N/A
Quick Prime Kit
Quick Prime
55/1251-444N/A
c.
Renew Flexible Foam 10
Mixture expands roughly 6 times original volume and develops a uniform cell structure. Foam expands to full
volume in 5 minutes, may be handled in 30 minutes and fully cures in 2 hours. Sold kit.
Description
Pint Kit
Gallon Kit
5 Gallon Kit
Item No. ð
4651146521 46531
d.
Renew Silicone Replicator
A long-lasting silicone rubber that can be applied directly to the skin to make ultra-high resolution impressions
of the face, hands, feet and other body parts. The rubber cures quickly and will reproduce perfect details
from any original casting. Compatible with urethane, silicone, rubber, plaster, wax and resins. Working time:
90 seconds. Demold time: 6 minutes depending on material temperature, ambient temperature and body
temperature. Sold each.
Kit Size
400ml Cartridge
Pint
Gallon
5 Gallon
Item No. ð 83711 8372183781 83791
99816400ml Dispensing Gun
99815
400ml Static Mixing Tube, 10/Pkg
FABRIC ATION
e.
Chemicals
59
Renew Silicone
A high-performance silicone rubber suitable for making ultra-soft, custom silicone liners, end pads and
prosthetic appliances. Cured rubber exhibits high tear strength and good wear resistance. Cures at room
temperature. Translucent clear. Available in 400ml cartridge or bulk containers.
Silicone 00-30
Silicone 5
Silicone 10
00-30
5A
10A
Silicone 20
20A
Working Time
45 Minutes
1 Minute
10 Minutes
25 Minutes
5 Minutes
75 Minutes
4 Hours
Cure Time
4 Hours
Dual Cartridge Kit
863118441182311 83411
Pint Kit
86331
N/A 8233183421
Gallon Kit
86351
N/A 8235183431
FABRICATION
Product
Shore Hardness
5 Gallon Kit
86381
N/A 8239183451
99816400ml Dispensing Gun
99815
400ml Static Mixing Tube, 10/Pkg
f.
Silicone Elastomer
Sold lb. Includes catalyst.
Item No. ð
6382
g.
Ureflex II
A fast demolding polyurethane system which can be hand or machine cast for producing small molds. Also
works well in vacuum cast. Quart kit.
Item No. ð
F42 A/B QT
60
Chemicals
Fabric ation
SEALANT
FABRICATION
a.
Ambroid Varnish
Gallon. Sold each.
Item No. ð
AMB-100-1
b.
Cellulose Acetate Crystals
To make a cellulose solution for water-proofing plaster, pour 1 lb Cellulose Acetate Crystals into a one-gallon
container. Fill with acetone. Cap and let stand several days, turning upside down twice daily. Thin as needed
with acetone. 1 lb bag.
Item No. ð
CAC-1LB
c.
Hosmer-Lac™
An exceptionally high quality, clear, quick-drying lacquer. Ideal for finishing plastic laminations. Sold quart
or gallon. From Hosmer.
Description
Quart
Gallon
Item No. ð
5126351264
d.
Orthocoat
Clear protective coating for metal and leather. 12 oz aerosol.
Item No. ð
700-007
e.
732 Multi Purpose Sealant
139ml tube. Sold each. From Allard USA.
Item No. ð
649380000
FABRIC ATION
Chemicals
61
COSMETIC SKIN and PIGMENT
f.
New Skin Pigment
FABRICATION
Caucasian. Sold gallon. From Kingsley Manufacturing.
Item No. ð
NL7005G
NL7024New Skin Thinner, Gallon
g.
Kingsley Pigment
Compatible with most polyester, acrylic, and modified epoxy resins. Sold each.
Skin Tones Unit
5 Gallon
Caucasian
K18C-5GAL
Light Caucasian
N/A
Dark Caucasian
Medium Brown (4A)
Gallon
Pound
Quart
4 oz
N/A
K18CLBK18CQK18C4OZ
N/A
K18CLLBK18CLQK18CL4OZ
K18CD-5GAL
N/A
K18CDLBK18CDQK18CD4OZ
K184A-5GAL
N/A
K184ALB K184AQK184A4OZ
Dark Brown (7A)
K187A-5GAL
N/A
K187ALBK187AQK187A4OZ
Latin
N/A
N/A
K18LLBK18LQK18L4OZ
Oriental
N/A
N/A
K18OLBK18OQK18O4OZ
Colors
Unit
Gallon
Aqua
N/A
Blue
N/A
Black
Pound
Quart
4 oz
N/A
N/A
K18AQ4OZ
K18BLLBK18BLQ DISCON
K18BLKGALK18BLKLB K18BLKQ K18BLK4OZ
Brown
N/A
K18BRLB K18BRQK18BR4OZ
Green
N/A
K18GLBK18GQK18G4OZ
Iron Blue
N/A
N/A
K18IBQK18IB4OZ
K18BLT4OZ
Light Blue
N/A
N/A
N/A
Lilac
N/A
N/A
N/A
K18LI4OZ
Medium Blue
N/A
N/A
N/A
K18MB4OZ
N/A
K18NEBL4OZ
Neon Blue
N/A
N/A
Orange
N/A
K18ORLB
Purple
N/A
N/A
N/AK18OR4OZ
K18PQK18P4OZ
K18RLBK18RQK18R4OZ
Red
N/A
Ultra Blue
N/A
N/A
Violet
N/A
N/A
Yellow
N/A
K18YLBK18YQK18Y4OZ
White
N/A
K18WLBK18WQK18W4OZ
K18UBQK18UB4OZ
N/A
K18V4OZ
62
Chemicals
Fabric ation
COSMETIC SKIN and PIGMENT — Continued
FABRICATION
a.
EZ-Skin
E-Z Skin is a tough vinyl skin coating that can be brushed or sprayed, and pigmented for that special custom
finish. The unique formulation of E-Z Skin was developed by PRS utilizing the many years of technical expertise of our staff in shaping and applying synthetic skins to prostheses. This product is recommended for all
of your synthetic skin applications. Gallon. Sold each. From PRS.
Item No. ðEZ-G
b.
Stretch EZ-Skin
Stretch EZ is specially formulated for above knee applications. The material can be applied directly onto a
one piece foam cover and will not inhibit knee flexion or extension. Stretch EZ will not interfere with knee
function by trying to imitate an extension assist. Stretch EZ will bond directly to a foam cover and move with
the foam while the knee is bending. Hose should not be applied to the prosthesis prior to applying Stretch
EZ. Shake the container well prior to use. Acetone may be used as a thinner with Stretch EZ. Pigment may be
added to achieve the desired custom finish. Gallon or quart. Sold each. From PRS.
Description
Gallon
Quart
Item No. ð
STREZ-128STREZ-132
c.
Flesh Color System
33 pigment colors formulated for use with EZ-Skin and Stretch EZ. May also be used with acrylic resins, modified acrylic resins, polyester and silicone. 8 oz bottles. Sold each. From PRS.
Standard Color Selection
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
Realistic Color Selection
R05
R09
R13
R17
R21
R25
R29
R33
R37
R41
R45
R49
R53
R57
R61
Skin tones pictured here are approximate.
Item No. ð FCS-(color)
SWATCH-100502Swatch Ring
FABRIC ATION
Decorative
63
FULL SHEET TRANSFERS
d.
Friddle’s Coloring Paper
FABRICATION
Designs to individually color thermoplastic materials. Sheet size 40” x 60”. Actual color may vary with material
and method used. Pattern samples shown 25% actual size. From Friddle’s Orthopedic.
Little Bear Red
Little Bear Blue
Jumbo
Tornado
P-1003P-1004P-1005P-1013
Fly & Drive Blue
Fly & Drive White
Dark Sky
Blue
P-1014P-1015P-1016P-1019
Red
P-1020
Yellow
Ocrean
Military Cammo
P-1021P-1023P-1025
Butterfly Light Purple
P-1026
Denim
Light Sky
Little Bear White
P-1030P-1032P-1045
Iceage 2
P-1050
Raindrops
Blue Snake
U.S. Flag
P-1051P-1052P-1053
Continued next page.
64
Decorative
Fabric ation
FULL SHEET TRANSFERS — Continued
Friddle’s Coloring Paper, Continued
FABRICATION
a.
Pink Camouflage
P-1056
Butterfly Spring
Solar
Black
P-1060P-1061P-1062
Carbon Braid
P-1063
Soccer Balls
Soccer Balls Blue/Yellow
Soccer Balls Germany
P-1064P-1065P-1066
Pink Snake
P-1067
Hearts & Roses
Tattoo
Light Pink
P-1068P-1069P-1071
Sweetheart
P-1072
Hispanic
Caucasian
Purple
P-1073P-1074P-1075
Flower Power
P-1076
Punk
Mystery
Neptune
P-1078P-1079P-1082
FABRIC ATION
Decorative
65
Starlight w/Pink Back
P-1083
Manhattan
FX
Wonderland
P-1084P-1085P-1086
FABRICATION
Leopard
P-1090
Zebra
Brown
P-1091P-1092
b.
JMS Plastics Transfer Paper
1600 x 1000mm sheet size. Sold sheet. From JMS Plastics.
Dalmatian
Blue Batik
Blue Wave
Lava
110P26/01110P26/02110P26/03110P26/04
Jeans
Hearts
Black & White Hearts
Green Squares
110P26/05110P26/06110P26/07110P26/08
Flowers & Kids
Jungle
110P26/09110P26/10
66
Decorative
Fabric ation
FULL SHEET TRANSFERS — Continued
FABRICATION
a.
Fillauer Transfer Paper
30” width. Sold yard. From Fillauer.
Butterflies
Jungle Animals II
Digital Camouflage
Martians
999101999102999103DISCON
Planes, Cars & Trucks
Small Leopard Skin
Solid Blue
USA Flag
999125999120999021999022
FABRIC ATION
b.
Decorative
67
Random Cartoon Transfers
Random cartoon sheet size measures approximately 8.5” x 11”. Sold each.
FABRICATION
Bugs Bunny
Lola
Marvin
Road Runner
400202400207400203400205
Coyote
Speedy Gonzales
Taz
Tweety Bird
400206400210400204400201
Tweety Fly
Batman
Superman
Spiderman
400211400209400212400208
Scooby Doo
400213
68
Decorative
Fabric ation
INDIVIDUAL TRANSFERS
FABRICATION
a.
NFL Transfers
Full color single NFL transfers measure approximately 3-1/2” square. Sold each.
Item No.TeamItem No.
TeamItem No.
Team
b.
400401
Arizona Cardinals
400407 Green Bay Packers
400426 Oakland Raiders
400402
Atlanta Falcons
400432 Houston Texans
400411 Philadelphia Eagles
400430
Baltimore Ravens
400420 Indianapolis Colts
400427 Pittsburgh Steelers
400416
Buffalo Bills
400421 Jacksonville Jaguars
400428 San Diego Chargers
400403
Carolina Panthers
400422 Kansas City Chiefs
400413 San Francisco 49ers
400404
Chicago Bears
400423 Miami Dolphins
400412 St. Louis Rams
400417
Cincinnati Bengals
400408 Minnesota Vikings
400429 Seattle Seahawks
400431
Cleveland Browns
400424 New England Patriots
400414 Tampa Bay Buccaneers
400405
Dallas Cowboys
400409 New Orleans Saints
400419 Tennessee Titans
400418
Denver Broncos
400410 New York Giants
400415 Washington Redskins
400406
Detroit Lions
400425 New York Jets
NHL Transfers
Full color single NHL transfers measure approximately 3-1/2” square. Sold each.
Item No.TeamItem No.
TeamItem No.
Team
N/A
Atlanta Thrashers
400510 Florida Panthers
400518 Philadelphia Flyers
400502
Boston Bruins
400512 Los Angeles Kings
400525 Phoenix Coyotes
400503
Buffalo Sabres
400501 Mighty Ducks
400519 Pittsburgh Penguins
400504
Calgary Flames
400527 Minnesota Wild
400520 San Jose Sharks
400506
Colorado Avalanche
400513 Montreal Canadiens
400521 St. Louis Blues
400505
Chicago Blackhawks
400514 New Jersey Devils
400522 Tampa Bay Lightning
400507Dallas Stars400515 New York Islanders
400523 Toronto Maple Leafs
400508
Detroit Red Wings
400516 New York Rangers
400524 Vancouver Canucks
400509
Edmonton Oilers
400517 Ottawa Senators
400526 Washington Capitals
FABRIC ATION
c.
Decorative
69
On-the-Spot Transfers
On-the-Spot Transfers measure approximately 3” x 4”. Sold each.
PT-EA2PT-BRD PT-BLD PT-PAN PT-TIG PT-HORPT-DOL
FABRICATION
PT-FROPT-SCO PT-LADPT-BU1 PT-BU2 PT-YEL PT-REX
PT-DRAPT-UNI PT-TED PT-ROS PT-DAI PT-FLO PT-BAL
PT-PRI PT-LIG PT-PAWPT-4LE PT-IRI PT-GAMPT-LIB
PT-PEAPT-PEA2 PT-SMI PT-YIN PT-CAN PT-FG1 PT-PIR
PT-BSKPT-FOO PT-SOC PT-GOLPT-HOC PT-SLA PT-BSE
PT-KIC PT-DIR PT-IND PT-RACPT-APA PT-F22 PT-F11
PT-POL PT-FIR PT-MOT PT-JDTPT-DUMPT-TRAPT-HUM
PT-BU3PT-BUL PT-FRDPT-WOL PT-FIS PT-GRI PT-RAZ
70
Decorative
Fabric ation
INDIVIDUAL TRANSFERS — Continued
FABRICATION
a.
On-the-Spot Transfers, Contined
PT-MONPT-TUR PT-TOU PT-MARPT-NAV PT-AIR PT-ARM
PT-USCG PT-CHOPPER PT-KARATE PT-KITTY
PT-MUSIC-PT-POLICECARPT-SPORT-
NOTES NEW BIKE
PT-T-PT-T- PT-T-PT-T-PT-T-PT-T-PT-T-
ALIEN
BEAR-F BUTTERFL-F CELTIC CHAMELEO-F
DEERDEMON
DRAGON1 EAGLE-F
FISH
HORSE-F HORSESHOE
KNOTS1KNOTS2
ROAD-BIKE ROOSTER-F SCORPION-F SHARK-F
SKULLS1
SKULLS2
SUN
PT-T-PT-T- PT-T-
TRIBAL1
TRIBAL2 WAR-HORSE
FABRIC ATION
b.
Decorative
71
Single Cartoon Transfers
Single cartoon transfers measure approximately 3” x 6”. Sold each.
FABRICATION
400114400121400117400107400116
400118400119400122400123400115
400124400113400112400108400120
400105400104400102400103
400126
400301400125400601
72
Fabric ation
PRE-PREG FABRICATION PRODUCTS
FABRICATION
a.
Prepreg
Designed to reduce lay-up time and produce low-void laminates with a high-quality finish, Prepreg — composite material impregnated with an epoxy resin — is ideal for prosthetic and orthotic fabrication. These
products feature a variable temperature cure set from 120°F to 400°F, may be stored up to twelve months in
the freezer or two months on the shelf, and can be frozen and thawed repeatedly with no adverse effects
providing the material remains sealed during these processes. Sold in 5-yard lengths.
Description
Item No.ò
Bi-Axial Carbon, 50” Width
BAC-50
Unidirectional Carbon Tape, 12” width
UCT-12
b.
Bleeder / Breather
Material that acts as an air wick allowing the vacuum bag to draw down evenly and uniformly while absorbing the excess resin.
Description
Item No.ò
4 oz/yd2 (135g/m2)
ECONOWEAVE 44
10 oz/yd2 (309g/m2)
ECONOWEAVE 1010
c.
Sealing Tape
A sticky, putty-like substance designed to maintain its integrity under high-pressure and high-temperature
conditions used to seal the bagging material.
Item No. ð
AT-200Y
FIBERGLASS and CARBON CLOTH
d.
Fiberglass Cloth
38” width. Sold per yard.
Item No. ð
FGC-38
e.
PTFE Coated Fiberglass Fabric
Sold per foot.
Thickness x Width
.003 x 38”
Item No. ð PTFE-003
.010 x 38”
.010 x 48”
.025 x 31”
PTFE-010PTFE-010-4948 PTFE-025
FABRIC ATION
73
FIBERGLASS and CARBON CLOTH — Continued
f.
Carbon Fiber Cloth
Dimensions
48” x 20”
50” x 100 Yds
Item No. ð
CFC-420-RCFC-500-R
FABRICATION
Sold roll.
TAPE
g.
Bi-Directional Carbon Tape
Sold by the foot.
Width
1”
2”
Item No. ð
5003K-15003K-2
h.
Carbon Fiber Tape
10 yard roll. Sold each.
Width
1”
2”
3”
Item No. ð
CFT-100CFT-200 CFT-300
i.
Carbon Tape Multidirectional
This tape comes in a 2 inch width, but will expand to a 4 inch width. It is especially useful when conforming
to irregular shapes without fiber wrinkling or creasing. Sold roll. From SPT Technology.
Length
10 Feet
50 Feet
150 Feet
1” Width
N/A
CBF1=50FTN/A
2” Width
CBF2=10FTCBF2=50FTCBF2=150FT
j.
Carbon Fiberglass Webbing
Sold roll. From SPT Technology.
Width
5 Feet
20mm
25mm
50mm
70mm
100mm
150mm
616B2=20X5616B2=25X5N/A616B2=70X5616B2=100X5616B2=150X5
10 Feet
N/A
616B2=25X10616B2=50X10N/A
N/A
N/A
20 Feet
N/A
616B2=25X20616B2=50X20N/A
N/A
N/A
50 feet
N/A
616B2=25X50616B2=50X50N/A
N/A
N/A
74
F a b r ic a t io n
TAPE — Continued
FABRICATION
a.
Carbon Tape Unidirectional
Ideal for reinforcing high-stress points and enhancing durability. Carbon tape also improves rigidity and
strength in laminations. This tape comes in four widths and four lengths. Tape has finished edges Sold roll.
From SPT Technology.
Length
10 Feet
30 Feet
50 Feet
150 Feet
1” Width
CTU1=10FT CTU1=30FTCTU1=50FTCTU1=150FT
2” Width
3” Width
4” Width
b.
Fiberglass Tape
Width
Item No. ð
1”
1-1/2”
2”
3”
4”
6”
8”
12”
FGT-010FGT-015FGT-020FGT-030FGT-040FGT-060FGT-080FGT-120
c.
Spectralon™ Tape
Combining the high-strength properties of Spectra™ with nylon, Spectralon™ allows for a thinner lay-up,
requiring less resin, is compatible with acrylic and epoxy resins and provides exceptional stretch to accommodate rapid size changes. Lightweight. White. Sold yard.
Width
1” Width
3/4”
1”
1.5”
2”
SPT34 SPT1SPT15 SPT2
WEBBING
d.
Dacron® Webbing
The highest quality tape, ideal for arm harnesses, body jackets and reinforced strapping. Standard widths.
Width
1/2”
5/8”
3/4”
1”
1-1/2”
2”
White
05WDAC58WDAC34WDAC 1WDAC 15WDAC 2WDAC
Beige
05BDAC58BDAC34BDAC 1BDAC 15BDAC 2BDAC
Black
05LDAC
58LDAC
34LDAC
1LDAC-WB15LDAC-WB
2LDAC
Red
1RDAC15RDAC 2RDAC
Royal Blue
1RBDAC15RBDAC 2RBDAC
Green
1GDAC15GDAC 2GDAC
Yellow
1YDAC15YDAC 2YDAC
Purple
1PUDAC15PUDAC 2PUDAC
FABRIC ATION
e.
75
Standard Dacron® Webbing
Width
1/2”
5/8”
3/4”
1”
1-1/2”
2”
DT-050-WHDT-058-WHDT-075-WH DT-100-WHDT-150-WH DT-200-WH
Beige
DT-050-BGDT-058-BGDT-075-BG DT-100-BGDT-150-BG DT-200-BG
Black
DT-050-BKDT-058-BKDT-075-BK DT-100-BKDT-150-BK DT-200-BK
FABRICATION
White
f.
Double Thick Dacron® Webbing
Width
1/2”
3/4”
1”
White
DTH-050-NDTH-075-N DTH-100-N
Beige
DTH-050-BDTH-075-B DTH-100-B
Black
DTH-050-BKDTH-075-BK DTH-100-BK
g.
Lightweight Cotton Webbing
Width
1/2”
5/8”
1”
1-1/2”
2”
CT108/05LCT108/58LCT108/34L CT108/1L CT108/15L CT108/2L
White
CT108/05WCT108/58WCT108/34W CT108/1W CT108/15W CT108/2W
Natural
CT108/05NCT108/58NCT108/34N CT108/1N CT108/15N CT108/2N
h.
3/4”
Black
Also available in 3/8” and 3” widths.
Heavyweight Cotton Webbing
Width
1”
1-1/2”
2”
White
CWH-100-WCWH-150-W CWH-200-W
Gray
CWH-100-GCWH-150-G CWH-200-G
i.
Lightweight Polypropylene Webbing
Strong, economical webbing available in a variety of colors. 100 yard roll. Sold each.
Width
1”
1-1/2”
2”
White
PP245/1WPP245/15W PP245/2W
Black
PP245/1LPP245/15L PP245/2L
76
F a b r ic a t io n
ELASTIC
FABRICATION
a.
Limb Elastic
Width
1”
1-1/2”
2”
White
LE-100-WLE-150-W LE-200-W
Gray
LE-100-GLE-150-G LE-200-G
b.
Artificial Limb Elastic
Width
1”
1-1/2”
2”
White
ALE1WALE15W ALE2W
Gray
ALE1GALE15G ALE2G
c.
Knit-Rite Elastic Webbing
White. 36 yard roll. Sold each.
Width
1”
Item No. ð
6W729910
d.
Elastic Webbing
White. Sold per yard.
Width
2”
3”
4”
6”
8”
10”
Item No. ðEW-02EW-03EW-04EW-06EW-08EW-10
FABRIC ATION
77
RUBBER SHEETS
e.
Gum Rubber
Item No. ðGR-360-Y
FABRICATION
1/16” thickness. 40” width. Sold per yard.
f.
Rubber Sheet
Washable, flexible strap material. 36” width. Sold per foot.
Thickness
1/16”
1/8”
Item No. ð
211020-FL211018-FL
78
Fasteners
F a b r ic a t io n
BUCKLES and HOOKS
FABRICATION
a.
Plastic Cam Buckle
100 per package.
Width
3/4”
1”
1-1/2”
2”
Item No. ðPL402-12BK PL402-16BKPL402-24BK PL402-32BK
b.
Plastic Side Release Buckle
1”. 100 per package.
Item No. ð
PL211-16BK
c.
Clip Closure
Plastic. 25mm. Sold each.
Item No. ð44P11
d.
Buckle with Keeper
Brass, nickel-plated. 100 per package.
Width
1/2”
5/8”
3/4”
Item No. ð
214411214429 214437
e.
Combination Strap Buckle
100 per package.
Width
1/2”
5/8”
3/4”
Item No. ð
05FSB58FSB 34FSB
f.
Concave Strap Buckle
100 per package.
Width
Item No. ð
1/2”
5/8”
3/4”
1”
05SBC 58SBC34SBC 1SBC
FABRIC ATION
g.
Fasteners
79
Strap Buckle with Loose Roller
Heel type. 100 per package.
Width
1/2”
5/8”
3/4”
1”
FABRICATION
Item No. ð 05SBLR 58SBLR34SBLR 1SBLR
h.
Retainer Buckle
Sold each.
Item No. ð
51886
51881
Suspension Strap Retainer with Screw, Stainless Steel
51883 Suspension Strap Retainer only, Stainless Steel
i.
Metal Safety Buckle
100 per package.
Width
3/4”
7/8”
1”
Item No. ð 34SBM78SBM 1SBM
Width
Item No. ð
1-1/4”
1-3/8”
1-5/8”
1-1/8”
118SBM
2”
114SBM 138SBM158SBM 2SBM
j.
Double Slide Buckle
100 per package.
Width
1”
1-1/2”
2”
Item No. ð
1DSB15DSB 2DSB
k.
Four Bar Buckle
Sold each.
Width
1/2”
3/4”
1”
Item No. ð
5102651027 51028
l.
Truss Catch
100 per package
Width
3/4”
1”
1-3/8”
Item No. ð
34TC1TC138TC
80
Fasteners
F a b r ic a t io n
BUCKLES and HOOKS — Continued
FABRICATION
a.
2” Hook Only
No slide. Zinc Dye Cast. 100 per package.
Item No. ð
3056H022001
LOOPS and RINGS
b.
Metal Rectangular Loop
100 per package.
Inside Width
5/8”
1/4” Aperture
Thickness
3/4”
1”
1-1/2”
2”
1M10025
.105”
3/8” Aperture
58M100
34M100 1M10015M100
Thickness
.08”
.08”
.12”
.12”
3/8” Aperture
34M10038 1M1003815M10038
Thickness .105”.105”.105”
2M100
.12”
1/2” Aperture
1M1005015M10050 2M10050
Thickness
.12”
.14”
.12”
7/16” Aperture Welded
1M100W15M100W 2M100W
Thickness .14” .12” .12”
c.
Metal Rectangular Loop with Roller
100 per package.
Width
1”
1-1/2”
2”
Item No. ð
1RRM15RRM 2RRM
d.
Stainless Steel Oval Loop
3/16” thickness. 25 per package.
Width
1”
1-1/2”
2”
Item No. ð
214353214361 214379
e.
Welded D-Ring
1” x 3/4”. 100 per package.
Item No. ð
7167DW-20-90
FABRIC ATION
Fasteners
81
CHAFES and RING TABS
f.
Triangular Chafe
Width
1”
1-1/2”
2”
White
214085 214087-01214089-01
Black
214085BLK214087BLK214089BLK
FABRICATION
25 per package.
g.
Triangular Chafe
25 per package. Also available in colors.
Width
1”
1-1/2”
2”
White
1WCHE15WCHE 2WCHE
Beige
1BCHE15BCHE 2BCHE
Black
1LCHE15LCHE 2LCHE
h.
Triangular Chafe with Metal Loop
25 per package.
Width
3/4”
1”
1-1/2”
2”
White
34MWCHE 1MWCHE15MWCHE 2MWCHE
Beige
34MBCHE 1MBCHE15MBCHE 2MBCHE
Black
34MLCHE 1MLCHE15MLCHE 2MLCHE
i.
Triangular Chafe with Metal Loop
25 per package.
Width
1”
1-1/2”
2”
White
214185-01214187-01 214190
Black
214185BLK214187BLK214190BLK
j.
Triangular Chafe with Metal Loop and Roller
25 per package.
Width
1”
1-1/2”
2”
White
1MWCHERR15MWCHERR2MWCHERR
Beige
1MBCHERR15MBCHERR2MBCHERR
Black
1MLCHERR15MLCHERR2MLCHERR
k.
Triangular Chafe with Zytel Loop
White. 25 per package.
Width
1”
1-1/2”
2”
Item No. ð
214285214287 214289
82
Fasteners
F a b r ic a t io n
CHAFES and RING TABS — Continued
FABRICATION
a.
Triangular Chafe with Plastic Concave Loop
25 per package.
Width
1”
1-1/2”
2”
White
1CWCHE15CWCHE 2CWCHE
Beige
1CBCHE15CBCHE 2CBCHE
Black
1CLCHE15CLCHE 2CLCHE
b.
Triangular Chafe with Black Metal Loop
Black only. 25 per package.
Width
1”
1-1/2”
2”
Item No. ð
1MLCHE-L15MLCHE-L 2MLCHE-L
c.
Washer Reinforced Ring Tab
Low profile with metal loop (pictured) or metal loop and roller ring. 50 per package.
Width
1”
1-1/2”
2”
1”
1-1/2”
2”
w/Metal
Loop
w/Metal
Loop
w/Metal
Loop
w/Loop and
Roller Ring
w/Loop and
Roller Ring
w/Loop and
Roller Ring
White
1WWR
15WWR
2WWR
1WWR/RR15WWR/RR 2WWR/RR
Beige
1BWR
15BWR
2BWR
1BWR/RR15BWR/RR 2BWR/RR
Black
1LWR
15LWR
2LWR
1LWR/RR15LWR/RR 2LWR/RR
Red
1RWR
15RWR
2RWR
1RWR/RR15RWR/RR 2RWR/RR
Yellow
1YWR15YWR2YWR
1YWR/RR
15YWR/RR
2YWR/RR
1KGWR
Kelly Green
15KGWR
2KGWR
1KGWR/RR15KGWR/RR 2KGWR/RR
Purple
1PUWR
15PUWR
2PUWR
1PUWR/RR15PUWR/RR 2PUWR/RR
Orange
1ORWR
15ORWR
2ORWR
1ORWR/RR15ORWR/RR 2ORWR/RR
Royal Blue
1RBWR
15RBWR
2RBWR
1RBWR/RR15RBWR/RR 2RBWR/RR
Light Gray
1LGWR
15LGWR
2LGWR
1LGWR/RR15LGWR/RR 2LGWR/RR
Slate Gray
1SGWR
1SSGWR
2SGWR
1SGWR/RR1SSGWR/RR 2SGWR/RR
Light Blue
1LBWR
15LBWR
2LBWR
1LBWR/RR15LBWR/RR 2LBWR/RR
1PWR
Pink
1BRWR
Brown
15PWR
15BRWR
2PWR
2BRWR
1PWR/RR15PWR/RR 2PWR/RR
1BRWR/RR15BRWR/RR 2BRWR/RR
Navy Blue
1NBWR
15NBWR
2NBWR
1NBWR/RR15NBWR/RR 2NBWR/RR
Olive Green
1OGWR
15OGWR
2OGWR
1OGWR/RR15OGWR/RR 2OGWR/RR
Neon Yellow
1NYWR
15NYWR
2NYWR
1NYWR/RR15NYWR/RR 2NYWR/RR
Neon Orange
1NOWR
15NOWR
2NOWR
1NOWR/RR15NOWR/RR 2NOWR/RR
Neon Green
1NGWR
15NGWR
2NGWR
1NGWR/RR15NGWR/RR 2NGWR/RR
Neon Pink
1NPWR
15NPWR
2NPWR
1NPWR/RR15NPWR/RR 2NPWR/RR
Burgundy
1BURWR
15BURWR
2BURWR
1BURWR/RR15BURWR/RR 2BURWR/RR
Assorted
1ACWR
15ACWR
2ACWR
1ACWR/RR15ACWR/RR 2ACWR/RR
FABRIC ATION
Fasteners
83
HOOK and LOOP
d.
Standard Hook Fastener
Width
5/8”
3/4”
1”
1-1/2”
2”
4”
Type
White
58WH34WH 1WH 15WH 2WH
4WHHook
Beige
58BH34BH 1BH 15BH 2BH
4BHHook
Black
58LH34LH 1LH 15LH 2LH
4LHHook
Red
FABRICATION
Sew quality. 25 yard roll. Sold each.
58RDH34RDH 1RDH 15RDH 2RDHN/A Hook
Yellow
58YEH34YEH1YEH15YEH2YEHN/AHook
Kelly Green
58KGH34KGH 1KGH 15KGH 2KGHN/A Hook
Purple
58PURH34PURH 1PURH 15PURH 2PURHN/A Hook
Lavender
58LVH34LVH 1LVH 15LVH 2LVHN/AHook
Orange
58ORH34ORH 1ORH 15ORH 2ORHN/A Hook
Royal Blue
58RBH34RBH 1RBH 15RBH 2RBHN/AHook
Light Gray
58LGH34LGH 1LGH 15LGH 2LGHN/AHook
Slate Gray
58SGH34SGH 1SGH 15SGH 2SGHN/A Hook
Light Blue
58LBH34LBH 1LBH 15LBH 2LBHN/AHook
Pink
58PKH34PKH 1PKH 15PKH 2PKHN/AHook
Brown
58BRH34BRH 1BRH 15BRH 2BRHN/AHook
Navy Blue
58NBH34NBH 1NBH 15NBH 2NBHN/A Hook
Light Navy
58LNH34LNH 1LNH 15LNH 2LNHN/AHook
Olive Green
58OGH34OGH 1OGH 15OGH 2OGHN/A Hook
Neon Yellow
58NYH34NYH 1NYH 15NYH 2NYHN/A Hook
Neon Orange
58NOH34NOH 1NOH 15NOH 2NOHN/A Hook
Neon Green
58NGH34NGH 1NGH 15NGH 2NGHN/A Hook
Neon Pink
58NPH34NPH 1NPH 15NPH 2NPHN/A Hook
Burgundy
58BUH34BUH 1BUH 15BUH 2BUHN/A Hook
Width
5/8”
3/4”
1”
1-1/2”
2”
4”
Type
White
58WL34WL 1WL 15WL 2WL
4WLLoop
Beige
58BL 34BL1BL-WB15BL2BL-WB
4BLLoop
Black
58LL34LL 1LL 15LL 2LL
4LLLoop
Red
58RDL34RDL 1RDL 15RDL 2RDLN/A Loop
Yellow
58YEL34YEL1YEL15YEL2YELN/ALoop
Kelly Green
58KGL34KGL 1KGL 15KGL 2KGLN/A Loop
Purple
58PURL34PURL 1PURL 15PURL 2PURLN/A Loop
Lavender
58LVL34LVL 1LVL 15LVL 2LVLN/ALoop
Orange
58ORL34ORL 1ORL 15ORL 2ORLN/A Loop
Royal Blue
58RBL34RBL 1RBL 15RBL 2RBLN/ALoop
Light Gray
58LGL34LGL 1LGL 15LGL 2LGLN/ALoop
Slate Gray
58SGL34SGL 1SGL 15SGL 2SGLN/A Loop
Light Blue
58LBL34LBL 1LBL 15LBL 2LBLN/ALoop
Pink
58PKL34PKL 1PKL 15PKL 2PKLN/ALoop
Brown
58BRL34BRL 1BRL 15BRL 2BRLN/ALoop
Navy Blue
58NBL34NBL 1DNL 15DNL 2NBLN/A Loop
Light Navy
58LNL34LNL 1LNL 15LNL 2LNLN/ALoop
Olive Green
58OGL34OGL 1OGL 15OGL 2OGLN/A Loop
Neon Yellow
58NYL34NYL 1NYL 15NYL 2NYLN/A Loop
Neon Orange
58NOL34NOL 1NOL 15NOL 2NOLN/A Loop
Neon Green
58NGL34NGL 1NGL 15NGL 2NGLN/A Loop
Neon Pink
58NPL34NPL 1NPL 15NPL 2NPLN/A Loop
Burgundy
58BUL34BUL 1BUL 15BUL 2BULN/A Loop
84
Fasteners
F a b r ic a t io n
HOOK and LOOP — Continued
FABRICATION
a.
Velcro® Tape Fastener
Provides an adjustable, highly secure and jam proof closure system. 25 yard roll. Sold each.
Width
5/8”
3/4”
1”
1-1/2”
2”
Type
White
190181190336190528190636190749Hook
190004190228190388190592190660Loop
Beige
190197190350190543190642190762Hook
190028190246190408190598190676Loop
Black
190213190367190562190650190773Hook
190054190269190431190607190690Loop
b.
Velcro® Brand Pressure Sensitive Fastener
Woven hook and loop fastener with acrylic pressure sensitive adhesive for superior bond strength. Easily
applied. Simply remove the release film and press tape into place. 25 yard roll. Sold each.
Width
5/8”
3/4”
1”
1-1/2”
2”
Type
White
190873190935191033191157191231Hook
190821190899190959191129 191181Loop
Beige
190878190937191041191162191241Hook
190828190904190972191135 191191Loop
Black
190882190940191051 191166 191245Hook
190836190911190984191140191195Loop
c.
Pressure Sensitive Hook and Loop
Pressure sensitive hook and loop with rubber based adhesive. Also available in colors. 25 yard roll. Sold each.
Width
5/8”
3/4”
1”
1-1/2”
2”
4”
White Hook
58WHPS34WHPS 1WHPS 15WHPS 2WHPS 4WHPS
Beige Hook
58BHPS34BHPS 1BHPS 15BHPS 2BHPS 4BHPS
Black Hook
58LHPS34LHPS 1LHPS 15LHPS 2LHPS 4LHPS
White Loop
58WLPS34WLPS 1WLPS 15WLPS 2WLPS 4WLPS
Beige Loop
58BLPS34BLPS 1BLPS 15BLPS 2BLPS 4BLPS
Black Loop
58LLPS34LLPS 1LLPS 15LLPS 2LLPS 4LLPS
d.
Adhesive Backed Clear Hook
Aggressive plastic hook with a strong rubber-based adhesive. Great for foam straps. Can be sewn or welded.
Width
1”
1-1/2”
2”
Item No. ð
1HPSC15HPSC 2HPSC
FABRIC ATION
e.
Fasteners
85
One Wrap Tape®
Back to back hook and loop that attaches to itself when wrapped. 25 yard roll. Sold each.
Width
5/8”
3/4”
1”
1-1/2”
2”
OWT58WOWT34W OWT1W OWT15W OWT2W
Beige
OWT58BOWT34B OWT1B OWT15B OWT2B
Black
OWT58LOWT34L OWT1L OWT15L OWT2L
Royal Blue
OWT58RBOWT34RB OWT1RB OWT15RB OWT2RB
Red
OWT58RDOWT34RD OWT1RD OWT15RD OWT2RD
Gray
OWT58GROWT34GR OWT1GR OWT15GR OWT2GR
Kelly Green
OWT58KGOWT34KG OWT1KG OWT15KG OWT2KG
FABRICATION
White
f.
Hook/Hook
Back to back hook. 25 yard roll. Sold roll.
Width
5/8”
3/4”
1”
1-1/2”
2”
White
58WHHBB34WHHBB 1WHHBB 15WHHBB 2WHHBB
Beige
58BHHBB34BHHBB 1BHHBB 15BHHBB 2BHHBB
Black
58LHHBB34LHHBB 1LHHBB 15LHHBB 2LHHBB
g.
Hook and Loop Coins
Hook and loop coins with rubber based pressure sensitive adhesive. Sold roll.
Description
Count per Roll
Black
White
Beige
3/8” Hook
1300
38HOOKCOINSL38HOOKCOINSW38HOOKCOINSB
3/8” Loop
1300
38LOOPCOINSL38LOOPCOINSW38LOOPCOINSB
1/2” Hook
1400
1/2” Loop
1400
5/8” Hook
1200
5/8” Loop
1200
3/4” Hook
1028
3/4” Loop
1028
1” Hook
800
1” Loop
800
h.
Free Magic™
Rows of nylon hook and loop are woven alternately on the same surface side, creating a one-piece fastener.
Width
5/8”
3/4”
1”
1-1/2”
2”
White
FR58WFR34W FR1W FR15W FR2W
Black
FR58LFR34L FR1L FR15L FR2L
86
Fasteners
F a b r ic a t io n
HOOK and LOOP — Continued
FABRICATION
a.
C-Fold
Nylon loop wrapped with knit loop and sewn on both sides. An excellent strapping material. 25 yard roll.
Sold each.
Width
1”
1-1/2”
2”
White
1WFOLD15WFOLD 2WFOLD
Beige
1BFOLD15BFOLD 2BFOLD
Black
1LFOLD15LFOLD 2LFOLD
b.
Double Face Knit Loop Tape
Ideal for straps directly in contact with the skin. 25 yard roll. Sold each
Width
1”
1-1/2”
2”
White
1WDFLOOP15WDFLOOP 2WDFLOOP
Beige
1BDFLOOP15BDFLOOP 2BDFLOOP
Black
1LDFLOOP15LDFLOOP 2LDFLOOP
c.
Stretch Loop
Elasticized loop. Allows flexibility while maintaining grip. 10 yard roll. Sold each.
Width
White
Beige
Black
5/8”
WBCVEL58WWBCVEL58B WBCVEL58L
3/4”
1”
1-1/2”
2”
d.
Velstretch®
Used with Velcro® hook, Velcro® brand Velstretch® stretch loop makes a particularly comfortable splint strap.
Contours like a glove. 40 yards length. Sold roll. Also available in 10 yard rolls.
Width
White
Beige
Black
5/8”
WBCVEL58W4WBCVEL58B4 WBCVEL58L4
3/4”
1”
1-1/2”
2”
e.
Plush Pile
Both top and bottom materials are compatible with any hook material. Great for self-padded straps. 25 yard
roll. Sold each.
Width/Color
Item No. ð
1” White
2” White
1” Beige
2” Beige
1WPP2WPP1BPP 2BPP
FABRIC ATION
f.
Fasteners
87
Beta Pile II™ Loop
Has no harsh surfaces to cause skin irritation or discomfort to sensitive or painful areas. Both sides are hooksensitive and soft. Beige.
Roll
Roll
Roll
Sheet
1/2” x 30’
2” x 30’
6” x 10’
36” x 48”
Item No. ð
4469 44614460 4468
FABRICATION
Unit
Size
g.
VelFoam®
VelFoam® padding is hook-sensitive material one side, nylon on the reverse side. Soft and comfortable against
the skin. Stretches to prevent constriction. Hypoallergenic. Reusable and washable. White. 6” Width. 5 yard
roll. Sold each.
Item No. ð
281162
h.
VelFoam® 2
VelFoam® 2 is a 1/4” thick polyfoam strip with soft nylon tricot pile fabric laminated to both sides. The 2”
width can be used as padding for conventional splint straps. The 6” width makes an ideal splint lining when
used with self-adhesive hook. Latex free. Beige. 5 yard roll. Sold each.
Width
2”
6”
Item No. ð
281163281164
PREFABRICATED STRAPS
i.
Washer Reinforced Hook and Loop Straps
A plastic washer is ultrasonically welded into the hook end of these straps. 25 per package.
1” Width
Length
12”
112WWASH112BWASH 112LWASH
White
Beige
Black
16”
20”
1-1/2” Width
12”
16”
20”
30”
2” Width
12”
16”
20”
24”
88
Fasteners
F a b r ic a t io n
PREFABRICATED STRAPS — Continued
FABRICATION
a.
Aplix® Brand Self Gripping Washer Reinforced Straps
Washer reinforced, self-gripping fastener straps. 25 per package.
Size
1” x 12”
1” x 16”
1.5” x 12”
1.5” x 16”
2” x 14”
2” x 18”
White
H112WSAP H116WSAP H1512WSAPH1516WSAP H214WSAP H218WSAP
Beige
H112BSAP H116BSAP H1512BSAPH1516BSAP H214BSAP H218BSAP
Black
H112LSAP H116LSAP H1512LSAPH1516LSAP H214LSAP H218LSAP
b.
Aplix® Brand Self Gripping 50/50 Straps
25 per package.
Size
1” x 20”
1-1/2” x 20”
2” x 20”
White
120WWASHAP1520WWASHAP220WWASHAP
Beige
120BWASHAP1520BWASHAP220BWASHAP
Black
120LWASHAP1520LWASHAP220LWASHAP
c.
Aligator Straps
All-hook strap used to attach loop pieces onto itself. Features a strong, ultrasonic weld holding together
facing hook pieces and a streamline half-rounded hook tab. 10 per package.
Description
White
Beige
Black
1” x 4”
1.5” x 4”
14W-ALI14B-ALI 14L-ALI
154W-ALI154B-ALI 154L-ALI
d.
Dacron® Backed Hook and Loop Straps
High quality Dacron® stitched to hook and loop. White. 10 per package.
Length
10”
12”
16”
18”
20”
22”
1-1/2” Width
110WDS 112WDS 116WDS 118WDS120WDS 122WDS
1-1/2” Width
2” Width
e.
Deluxe C-Fold Adjustable Strap Kit
Includes C-Fold strap with metal link and chafe one end. Opposite end is welded with 3 cutting lines for easy
sizing adjustments. 5 per package.
Size
1” x 10”
1” x 18”
1.5” x 14”
1.5” x 18”
2” x 18”
White
DCFS1010WDCFS1018WDCFS1514WDCFS1518WDCFS2018W
Beige
DCFS1010BDCFS1018BDCFS1514BDCFS1518BDCFS2018B
FABRIC ATION
f.
Fasteners
89
50/50 Straps
Half of length is hook; half of length is loop. Fabrics are welded together. 25 per package.
These straps are also available in a variety of solid colors. Pictured here in Royal Blue.
Length
White
Beige
Black
12”
H112WSH112BS H112LS
16”
H116WSH116BS H116LS
20”
H120WSH120BS H120LS
1-1/2” Width
12”
H1512WSH1512BS H1512LS
16”
20”
2” Width
14”
H214WSH214BS H214LS
18”
H218WSH218BS H218LS
22”
H222WSH222BS H222LS
24”
H224WSH224BS H224LS
FABRICATION
1” Width
g.
25/75 Straps
25% of length is hook; 75% of length is loop. Fabrics are welded together. 25 per package.
Size
1” x 20”
1” x 24”
1.5” x 20”
1.5” x 24”
2” x 20”
2” x 24”
White
120WFS 124WFS 1520WFS1524WFS 220WFS 224WFS
Beige
120BFS 124BFS 1520BFS1524BFS 220BFS 224BFS
Black
120LFS 124LFS 1520LFS1524LFS 220LFS 224LFS
h.
Standard Hook and Loop Strap
Sold each. From Fillauer.
Size
1” x 10”
1” x 12”
1” x 14”
1.5” x 14”
1.5” x 18”
2” x 14”
2” x 18”
White
213017213025213033213215213223213256213264
Beige
213421213439213447213231213249213272213280
i.
AFO Pad and Strap Kit
Includes AFO pad, ultrasonically welded hook and loop strap, metal link and chafe for easy assembly. Sold 5
per package. From WBC Industries.
Width
1”
1-1/2”
2”
White
WBC10WDWBC15WDWBC20WD
Beige
WBC10WDBWBC15WDBWBC20WDB
Black
WBC10WDLWBC15WDLWBC20WDL
90
Fasteners
F a b r ic a t io n
PREFABRICATED STRAPS — Continued
FABRICATION
a.
AFO Reinforced Strap Kit
15” strap kit includes AFO pad, ultrasonically welded strap with hook end reinforced with a plastic washer,
metal link and plastic chafe for easy assembly. AFO pad matches strap color. 5 per package.
Width
1”
1-1/2”
2”
White
61016115 6120
Beige
62016215-WBC 6220
Black
63016315 6320
b.
Vinyl Reinforced Velcro® Strap
Prefabricated straps for finishing orthoses and prostheses. Straps can be trimmed to size while still maintaining a neat finished end by cutting along the welded bars. Sold each.
SIze
1” x 10” 1” x 14.5” 1.5” x 18” 1.5” x 26” 1.5” x 29” 2” x 18”
White
213550213552213554213556213558213559213560213562
2” x 26”
2’ x 34”
Beige
213600213608213616213624213632213636213640213648
c.
Vinyl Backed Hook and Loop Straps
Soft orthopedic vinyl-backed hook and loop straps, sewn and backed with a waterproof, marine grade vinyl.
Soft, flexible and very patient friendly. 18” length. 10 per package.
Width
1”
1-1/2”
2”
Black
LLS118LLLS1518L LLS218L
White
LLS118WLLS1518W LLS218W
Sandstone
LLS118SSLLS1518SS LLS218SS
d.
Knee Control Strap
Prefabricated strap with Velcro closures for use on KAFOs and KOs . May be used singly (distal to the patella)
or in pairs (distal and proximal to the patella). Sold each.
Lenght
3.5”
4.5”
5.5”
6”
Item No. ð 213924 213900213908 213916
e.
Ski Boot Strap
Features a ratchet tightening system and “squeeze” release. Choose from white or black. Sold each.
Description
White
Black
Item No. ð
SBS-WSBS-L
FABRIC ATION
Fasteners
91
AFO PADS
f.
AFO Pad
Strap Width
5/8”
1”
1-1/2”
2”
White
WBC6124S WBC6124M WBC6124LWBC6124XL
Beige
WBC6124SB WBC6124MB WBC6124LBWBC6124XLB
Black
WBC6124SL WBC6124ML WBC6124LLWBC6124XLL
FABRICATION
Orthopedic felt stitched to orthopedic vinyl. Sold each.
g.
Slender AFO Pad
Orthopedic felt stitched to orthopedic vinyl. Sold each.
Felt Size
Strap Width
1-3/4” x 2”
1”
AFO1WAFO1B AFO1L
White
Beige
Black
1-7/8” x 2-5/8”
1-1/2”
AFO15WAFO15B AFO15L
2-1/2” x 3-3/8”
2”
AFO2WAFO2B AFO2L
h.
AFO Pad
From Friddle’s Orthopedic. White.
Description
2” x 2.75”
Each
10/Pkg
2” x 3.75”
9000390003W
90003-1090003W-10
RIVETS, BURRS and WASHERS
i.
Jiffy Rivet
Single cap style. Eyelet open on bottom. 100 per package.
Cap Diameter
Eyelet
Item No. ð
7mm7mm7mm9mm9mm11mm11mm
13mm
7mm9mm11mm7mm9mm10mm
12mm
18mm
307SC309SC311SC407SC409SC510SC512SC N/A
j.
Speedy Rivet
Nickel plated brass. 1000 per package.
Size
3/8”
7/16”
9/16”
Item No. ð
89X91X 47X
92
Fasteners
F a b r ic a t io n
RIVETS, BURRS and WASHERS — Continued
FABRICATION
a.
Single Cap Speedy Rivet
Complete rivet sold 1,000 per package. Stems or caps only sold 100 per package.
Size
Cap Diam
Stem Diam
Stem Length
Complete
Stems
Caps
#1
19/64”1/8”19/64”
SR-1-1000SR-1-STEMSR-1-CAPS
#2
11/32”1/8”11/32”
SR-2-1000SR-2-STEM SR-2-CAPS
#3
11/32”
1/8”
27/64”
#5
27/64”
1/8”
7/16”
b.
Double Cap Speedy Rivet
Double cap. 100 per package.
Size
#2
Brass
#3
#4
#76
DSR-2 DSR-3 DSR-4DC-SR-76
Steel/Nickel
DSR-2-BRASSDSR-3-BRASSDSR-4-BRASSN/A
c.
Double Cap Rapid Rivet
100 per package.
Size
Small
Large
1/2” x 3/8”
11/32” x 1/4”
7/16” x 5/16”
Item No. ð
6840
6844 886844886840 886842
d.
Double Cap Rapid Rivet
100 per package.
Size
7/16” x 5/16”
Item No. ð
6842
e.
Nyloplex Rivet with Head
Large head requires no washer. Sold each.
Head Diam
Stem Diam
Stem Length
Item No.ò
10mm
4mm
12mm
886820
10mm
5mm
12mm
886822
12mm
4mm
24mm
886824
FABRIC ATION
f.
Fasteners
93
Nyloplex Stud Rivet
Sold each.
Head Diam
Stem Diam
Stem Length
Item No.ò
9mm
4mm
6mm
886801
9mm
4mm
10mm
886802
15mm
5mm
10mm
886805
FABRICATION
g.
Aluminum Rivet
100 per package.
Size
1/8” x 5/8”
1/8” x 3/4”
1/8” x 1”
Flat Head
AFR-04AFR-05 AFR-06
Countersunk
ACR-04N/A
N/A
h.
Cad Plated Copper Rivet
Sold lb.
Size
#8
#9
#10
#12
PCR-08-4PCR-09-4PCR-10-4
3/4” Length
#14
N/APCR-14-4
1” Length N/AN/AN/A
PCR-12-6N/A
PCR-08-7PCR-09-7PCR-10-7N/A
1-1/4” Length
N/A
i.
Quick Lock Fastener System
An alternative to speedy rivets, these low profile fasteners have no sharp edges, are non-corrosive and do
not obstruct radiographs. Rivets sold 100 per package. Rivets and Installation Tool sold separately.
Description
Size
Drill Hole
Rivet Stem and Head, Small
12mm
4.8mm
OLF-2-WHITEOLF-2-BLACK
White
Black
Rivet Stem and Head, Standard
16mm
4.8mm
Rivet Stem and Head, Standard Long
16mm
4.8mm
Rivet Stem and Head, Large
18mm
6.35mm
OLF-8-WHITEN/A
OLF-IT-1Installation Tool
j.
Flat Head Stainless Steel Rivet
Stainless steel. 100 per package.
Description
1/8” x 3/4”
Item No. ð
614112575
k.
Stainless Steel Rivet
Size
Flat Head
1/8” x 1/4” 1/8” x 3/8” 1/8” x 1/2” 1/8” x 5/8” 1/8” x 3/4”
1/8” x 1”
HHS-01HHS-02HHS-03HHS-04HHS-05HHS-06
Countersunk 45°
N/A
Countersunk
N/A
HHS-08HHS-09HHS-10 HHS-11 HHS-12
HSR-38CHHSR-05CHHSR-58CHHSR-34CH HSR-1CH
94
Fasteners
F a b r ic a t io n
RIVETS, BURRS and WASHERS — Continued
FABRICATION
a.
Stainless Steel Rivet
Stainless steel. Truss head. 100 per package.
Size
1/8” x 5/8”
Item No. ð
5/32” x 1/4” 5/32” x 11/32” 5/32” x 5/8”
3/16” x 3/8”
3/16” x 9/16”
886870886871886873886872886874 886876
b.
Countersunk Head Stainless Steel Rivet
Size
Item No. ð
5/32” x 1/2”
5/32” x 9/16”
3/16” x 1-1/4”
886881
886882
886910
c.
Copper Belt Rivet
Sold lb.
Size
Head
Under Head
Stem Tip
Length
DiameterDiameterDiameter
Approx
Item No.ò
Yield
#7
9/16”
.191”
.175”
1-1/4”
74
CBR-07-7
#7
9/16”
.191”
.175”
1-1/2”
62
CBR-07-8
#8
1/2”
.181”
.165”
3/4”
133
CBR-08-4
#8
1/2”
.181”
.165”
7/8”
120
CBR-08-5
#8
1/2”
.181”
.165”
1”
105
CBR-08-6
#8
1/2”
.181”
.165”
1-1/4”
86
CBR-08-7
#8
1/2”
.181”
.165”
1-1/2”
75
CBR-08-8
#9
15/32”
.161”
.145”
3/4”
160
CBR-09-4
#9
15/32”
.161”
.145”
7/8”
143
CBR-09-5
#9
15/32”
.161”
.145”
1”
129
CBR-09-6
#9
15/32”
.161”
.145”
1-1/4”
108
CBR-09-7
#9
15/32”
.161”
.145”
1-1/2”
93
CBR-09-8
#10
7/16”
.151”
.135”
3/4”
192
CBR-10-4
#10
7/16”
.151”
.135”
7/8”
165
CBR-10-5
CBR-10-6
#10
7/16”
.151”
.135”
1”
147
#10
7/16”
.151”
.135”
1-1/4”
121
CBR-10-7
#10
7/16”
.151”
.135”
1-1/2”
104
CBR-10-8
#12
?????
CBR-12-3
#12
3/8”
.137”
.123”
3/4”
244
CBR-12-4
#12
3/8”
.137”
.123”
1”
191
CBR-12-6
#12
3/8”
.137”
.123”
1-1/4”
160
CBR-12-7
#12
3/8”
.137”
.123”
1-1/2”
136
CBR-12-8
#14
5/16”
.102”
.092”
1”
336
CBR-14-6
d.
Monel Rivet
100 per package.
Size
1/8” x 1/4”
1/8” x 1/2”
1/8” x 3/4”
1/8” X 1”
Item No. ð FMR-01 FMR-03FMR-05 FMR-06
FABRIC ATION
e.
Fasteners
95
Round Head Iron Rivet
100 per package.
Size
1/8” x 1/2”
1/8” x 1”
5/32” x 1/2”
5/32” x 3/4”
FABRICATION
Item No. ð RHIR-03 RHIR-05RHIR-07 RHIR-08
f.
Wagon Box Rivet
3/16” x 1”. 100 per package.
Item No. ð
WBR-01
g.
Cad Plated Copper Burr
Sold 1/2 lb package.
Size
#8
#9
#10
#12
#14
Yield (approximately)
465
580
750
1,240
2,050
Item No. ð PCB-08PCB-09PCB-10PCB-12 PCB-14
h.
Copper Burr
Sold lb.
Size
Yield (approximately)
Item No. ð
#8
#9
#10
#12
#14
#15
465
580
750
1,240
2,050
2,650
CRB-08CRB-09CRB-10 CRB-12 CRB-14 CRB-15
i.
Nylon Washer
100 per package.
Size
#6
#8
#10
Fits Rivet Size
3mm
4mm
5mm
Flat Head
885459885467 885475
Countersunk Head
885483885491
N/A
j.
Nylatron Washer
Sold each.
Description
1/2” ID
3/16” x 1/2”
Item No. ð
19532-00120678-001
96
Fasteners
F a b r ic a t io n
SCREWS
FABRICATION
a.
Socket Attachment Block Screw
Stainless steel. Standard M6 x 10 x 20mm.
Item No. ð60329
b.
Mandrel Bushing Set Screw
Stainless steel. 3/8” x 16 x 1/4”.
Item No. ð55992
c.
Slotted Pan Head Screw
Stainless steel. 8-32 thread. 25 per package.
Length
1/4”
5/16”
7/16”
Item No. ð
880041880043 880047
d.
Slotted Screw
Sold 144 per package.
Diameter
3/16”
Item No. ð
55647 5564855649 55650
1/4”
5/16”
3/8”
e.
Chicago Screw
Brass/nickel or stainless steel. Sold package.
Description
Qty
1/4”
3/8”
Brass/Nickel
100/Pkg
CS-025CS-038
Stainless Steel
25/Pkg
CS-250COCS-380CO
FABRIC ATION
Metal Goods
97
BAR and BAND STOCK
f.
Round Edge Aluminum Band Stock
Width
5/8”
3/4”
1”
1-1/4”
1-1/2”
2”
Item No. ð230094230102230110230128230136230144
g.
FABRICATION
Aluminum. Round edge. 1/8” thickness. Sold in 5 foot lengths.
Square Edge Aluminum Band Stock
Aluminum. Square edge. 1/8” thickness. Sold in 6 foot lengths.
Width
1-1/2”
2”
Item No. ð
BS-1.5BS-2
h.
Round Edge Aluminum Bar Stock
Aluminum. Round edge. 3/16” thickness. Sold in 5 foot lengths.
Width
5/8”
3/4”
Item No. ð
230151230169
i.
Round Edge Aluminum Bar Stock
Aluminum. Round edge. Sold in 6 foot lengths.
Dimensions
1/4” x 3/4”
3/16” x 3/4”
1/4” x 5/8”
3/16” x 5/8”
3/16” x 1/2”
Item No. ð
A-1/4 X 3/4
A-3/16 X 3/4
A-1/4 X 5/8
A-3/16 X 5/8
A-3/16 X 1/2
j.
Square Edge Aluminum Bar Stock
Aluminum. Square edge. Sold in 6 foot lengths.
Dimensions
1/4” x 3/4”
3/16” x 3/4”
1/4” x 5/8”
3/16” x 5/8”
3/16” x 1/2”
Item No. ð
AT-1/4 X 3/4
AT-3/16 X 3/4
AT-1/4 X 5/8
AT-3/16 X 5/8
AT-3/16 X 1/2
98
Metal Goods
F a b r ic a t io n
BAR and BAND STOCK — Continued
Round Edge Stainless Steel Bar Stock
a.
FABRICATION
Stainless steel. Round edge. Sold in 5 foot lengths.
Width
1/2”
5/8”
3/4”
1/8” Thickness
233015233023 233031
5/32” Thickness
N/A
233064233072
3/16” Thickness
N/A
233098233106
Spring Steel Shank
b.
1.5 x 11. Sold each.
Item No. ð3M701411
c.
Image Not Available
Square Edge Spring Steel Bar Stock
Square edge. 1-1/2” width. Sold in 6 foot lengths.
Thickness
Item No. ð
1/32”
1/16”
3/32”
SS-1/32-6FTSS-1/16-6FTSS-3/32-6FT
FABRIC ATION
Sheet Goods
99
SHEET GOODS SWATCH RINGS
d.
Sheet Good Swatch Rings
Supplier
Acor
Item No. ð
SAMPLE RING
Apex
UCO International
SWATCH-100536
99/1000-000
FABRICATION
Various suppliers.
QUIKSTRIP™ WHEELS
b.
Acor QuikStrip™ Wheels
Sheet goods on a roll and boxed for convenient dispensing. 4.5” width. From Acor.
Strip Length
Strip Count
Item No.ò
59”
11
MDRW-00092
1/8” P-Cell® + 1.5mm 2AB Blue Poron Medical® Urethane
59”
19
PCPW-00016
3mm 2AB Blue Poron Medical® Urethane
180’
1
PORW-00028
Royal Blue Nylon + 1/8” NeoSponge™
48”
30
SDRW-00204
Description
1/8” P-Cell® + 1.5mm Blue Poron® Urethane + 1/8” Blue Puff
CORK
f.
Light Weight Cork
Non-moldable natural tree cork. Sold sheet. From Acor.
Specifications
Thickness
Durometer: 55 Shore A
Grindable: Yes
1/8”
(6 Iron)
1/4”
(12 Iron)
Sheet Size: 28” x 24”
Color: Natural
1/2”
(24 Iron)
1”
(48 Iron)
Item No. ð
SDUR-00079SDUR-00080SDUR-00081SDUR-00082
g.
Elasti-Cork™
Made of natural cork and Latex. Sold sheet. From Acor.
Specifications
Thickness
Heating Temp: 275° F
Grindable: Yes
1/8”
(6 Iron)
Molding Time: 3-5 min
Color: Natural
3/16”
(9 Iron)
1/4”
(12 Iron)
Item No. ð
SDUR-00011SDUR-00012SDUR-00013
10 0
Sheet Goods
F a b r ic a t io n
CORK — Continued
a.
MultiCork™
FABRICATION
Made of natural cork and EVA. Sold sheet. From Acor.
Specifications
Grindable: Yes
Color
1/8”
(6 Iron)
Molding Time: 3-5 min
1/4”
(12 Iron)
1/2”
(24 Iron)
Natural
Soft Purple
b.
Thermocork®
Thermocork® cork composite is heat formable and combines strength and flexibility. Provides good shock
absorption while maintaining its shape under severe stress. Easily formed directly to a positive model. Sold
sheet. From Aetrex.
Specifications
Durometer: ±55
Thickness
1/8”
(6 Iron)
Item No. ð 8013112
3/16”
(9 Iron)
1/4”
(12 Iron)
8013113
8013114
c.
3/8”
(18 Iron)
8013115*
*24” x 44” sheet size.
Thermocork® Lite
Thermocork® Lite is a lightweight thermoplastic blend that combines cork with polyolefin foam for greater
flexibility and cushioning. This unique composite makes Thermocork® Lite very easy to mold and grind.
Maintains shape and context under stress. Sold sheet. From Aetrex.
Specifications
3/16”
(9 Iron)
1/4”
(12 Iron)
Grindable: Yes
Thickness
1/8”
(6 Iron)
3/8”
(18 Iron)
1/2”
(24 Iron)
55 Durometer (29” x 36”)
8014-2 8014-3 8014-48014-5 8014-6
65 Durometer (26” x 33”)
8015-2 8015-3 8015-48015-5 8015-6
d.
S-Tech Cork
A blend of natural cork and EVA. Washable. 50 and 63 durometer. Sold sheet. From SoleTech.
Specifications
Durometer: 50
Durometer: 63
Thickness
1/8”
(6 Iron)
1/4”
(12 Iron)
Grindable: Yes
3/8”
(18 Iron)
1/2”
(24 Iron)
50 Durometer
E960640320E961240320E961840320E962440320
60 Durometer
E950640300E951240300E951840300E952440300
FABRIC ATION
e.
Sheet Goods
101
UCOkork®
Semi-rigid blend of copolymer foam and cork. Sold sheet. From UCO International.
Durometer: 50-60
Heating Temp: 270-300° F
Grindable: Yes
Thickness
Item No. ð
4mm
6mm
8mm
Molding Time: ±40 Sec
10mm
12mm
32/0027-70432/0027-70632/0027-70832/0027-71032/0027-712
FABRICATION
Specifications
SOLING
f.
Acor Sport Outsole
Offers superior flexibilty, oil resistance and durability. Four colors. Three tread patterns. Not moldable.
Specifications
Tread Style
Thickness: 7mm
Black
Beige
Grindable: Yes
Brown
White
Ribbed
SLHL-00079 SLHL-00080SLHL-00081
Sport-Wave
SLHL-10302 SLHL-10301SLHL-10303 SLHL-10300
Crinkle
SLHL-10294SLHL-10293SLHL-10295 SLHL-10292
N/A
g.
Crepe
Slip resistant and shock absorbant. Sold sheet. From Acor.
Specifications
Color
Thickness: 3/4” (19mm)
Black
Heating Time: 4-5 Min
Grindable: Yes
Dark Brown
White
Item No. ð
SLHL-00144SDUR-00107SLHL-00167
h.
Kemblo
1/8” thickness. 36” width. Sold yard.
Item No. ð
5555
102
Sheet Goods
F a b r ic a t io n
SOLING — Continued
a.
SolFlex Diamond
FABRICATION
A moderately firm density EVA/SBR blend that is durable, resilient and thermomoldable. Use against the skin
or as outsoling. Diamond pattern. Sold sheet. From SoleTech.
Specifications
Durometer: 50-55
Heating Time: 2.5 Min
Thickness 1/4”5/16”3/8”1/2”5/8”
(12 Iron)
(15 Iron)
(18 Iron)
(24 Iron)
(30 Iron)
Black
83121018008315101800831810180083241018008330101800
Brown
83122018008315201800831820180083242018008330201800
White
83123018008315301800831830180083243018008330301800
Almond
83124118008315411800831841180083244118008330411800
Clay
8312601800831560180083186018008324601800
Gray
8312701800
N/A
N/A
83187018008324701800N/A
b.
SolFlex Crepe
A moderately firm density EVA/SBR blend that is durable, resilient and thermo-moldable. It can be used
against the skin and as outsoling. Also referred to as Crepe. Sold sheet. From SoleTech.
Specifications
Durometer: 50-55
Thickness*
1/8”
(6 Iron)
1/4”
(12 Iron)
3/8”
(18 Iron)
1/2”
(24 Iron)
5/8”
(30 Iron)
3/4”
(36 Iron)
Black
8206101800 8212101800 8218101800 82241018008230101800 8236101800
Brown
8206201800 8212201800 8218201800 82242018008230201800 8236201800
White
8206301800 8212301800 8218301900 82243018008230301800 8236301800
Almond
8206411800 8212411800 8218411800 82244118008230411800 8236411800
821260180082186018008224601800N/A 8236601800
N/A
Clay
8206611800821261180082186118008224611800N/A 8236611800
Brite Red
Gray
821270180082187018008224701800N/A 8236701800
N/A
c.
*Also available in 5/16” (15 Iron)
SolFlex Firm
A firm EVA/SBR blend that is very durable and abrasion resistant. Use for outsoling, posting/wedging and
shoe buildups. Grindable. Sold sheet. From SoleTech.
Specifications
Durometer: 60-65
Thickness 1/4”5/16”3/8”1/2”5/8”
(12 Iron)
(15 Iron)
(18 Iron)
(24 Iron)
(30 Iron)
Black
84121018008415101800841810180084241018008430101800
Brown
8412201800
N/A
White
8412301800
N/A
841830180084243018008430301800
Medical Blue
8412501800
N/A
84185018008424501800
N/A
N/A
N/A
84185118008424511800
N/A
8412611800
N/A
84186118008424611800N/A
Light Navy
Brite Red
N/A8424201800N/A
FABRIC ATION
d.
Sheet Goods
103
SolFlex 70 Extra-Firm
One of the firmest EVA/SBR blends available. Designed for applications requiring maximum support. Spot
adjustable with heat gun. Sold sheet. From SoleTech.
Durometer: 70-75
Thickness
Black
1/8”
(6 Iron)
1/4”
(12 Iron)
95061018709512101800
3/8”
(18 Iron)
1/2”
(24 Iron)
FABRICATION
Specifications
N/A9524101800
Brown
N/A
N/A9518201800N/A
White
N/A
N/A9518301870N/A
Purple
N/A
N/A
N/A9524631870
e.
Midsoling
A high-density SBR rubber compound used to provide rigidity between the shoe bottom and the outsole, or
buildup. Sheet size 18” x 36”. Sold sheet. From SoleTech.
Thickness
4 Iron
6 Iron
(5/32”)
(1/8”)
Black
88041018008806101800
Brown
N/A8806201800
f.
Gum Crinkle (Luna Crepe)
A synthetic gum rubber which simulates the properties of real gum rubber. Similar to Wavy Gum, but with a
crinkle pattern for better wear properties. Sheet size 15” x 30”. Sold sheet. From SoleTech.
Thickness
7 Iron
(9/32”)
9 Iron
10.5 Iron
(3/16”)
12 Iron
(1/4”)
15 Iron
(5/16”)
Black
89071015008909101500891010150089121015008915101500
Tobacco
890722150089092215008910221500
Natural
89074615008909461500891046150089124615008915461500
N/A8915231500
g.
Wavy Gum
A synthetic gum rubber which simulates the properties of real gum rubber while providing very high abrasion
resistance. Wavy rib pattern. Sheet size 15” x 30”. Sold sheet. From SoleTech.
Thickness
7 Iron
(9/32”)
9 Iron
(3/16”)
12 Iron
(1/4”)
Black
900710150090091015009012101500
White
900730150090093015009012301500
Natural
900746150090094615009012461500
104
Sheet Goods
F a b r ic a t io n
a.
Wide Rib (Vulcrepe)
FABRICATION
An SBR rubber compound which provides good abrasion resistance and flexibility for outsole use. Suitable
for applications where a thicker sole is needed. Sheet size is 18” x 36”. Sold sheet. From SoleTech.
Thickness
7 Iron
(9/32”)
9 Iron
10.5 Iron
(3/16”)
12 Iron
(1/4”)
15 Iron
(5/16”)
Black
91071018009109101800911010180091121018009115101800
Brown
9107201800910920180091102018009112201800
N/A
b.
Fineline
An SBR rubber compound with a fine line design for more traction. The 18 iron sheet of Fineline is commonly
used to make metatarsal bars. Sheet size is 18” x 36”. Sold sheet. From SoleTech.
Thickness
10.5 Iron
12 Iron
(1/4”)
15 Iron
(5/16”)
18 Iron
(3/8”)
Black
9210151800921215180092151518009218151800
Oak
921049180092124918009215491800
N/A
c.
Fine Rib
An SBR rubber compound which provides good abrasion resistance and flexibility for outsole use. Sheet size
18” x 36”. Sold sheet. From SoleTech.
Thickness
6 Iron
9 Iron
(1/8”)
(13/16”)
Black
93061018009309101800
Brown
9306201800N/A
Oak
9306491800N/A
d.
Composition Soling
A very dense blend of SBR rubber compound and clay that provides good abrasion resistance and rigidity for
outsole use. Sheet size 18” x 36”. Sold sheet. From SoleTech.
Thickness
5 Iron
(13/64”)
7 Iron
(9/32”)
9 Iron
10.5 Iron
(3/16”)
12 Iron
(1/4”)
Black
94051018009407101800940910180094101018009412101800
Brown
94052018009407201800940920180094102018009412201800
White
Oak
N/A
9407301800940930180094103018009412301800
94054918009407491800940949180094104918009412491800
FABRIC ATION
e.
Sheet Goods
105
MiniCheck (Topy®)
An SBR rubber compound used primarily as a thin, lightweight sole protector in buildup applications. Cross
hatch design for abrasion resistance. Sheet size 18” x 36”. Sold sheet. From SoleTech.
Black
96031018009605101800
Neutral*
96031518009605151800
White
9603311800N/A
Oak
9603491800
f.
N/A
FABRICATION
Thickness
3.5 Iron
5 Iron
(9/64”)
(13/64”)
*Neutral is a very dark brown.
Herringbone Soling
An SBR rubber compound used primarily for outsoling with a herringbone pattern for added abrasion resistance. Available in black or white, 9 iron only. Sheet size 15” x 30”. Sold sheet. From SoleTech.
Color
Black
White
Item No. ð
9709101500
9709301500
g.
Vibram® Silvano
Outdoor/work rubber sheet. Long-wearing. Provides excellent traction. 10 iron. Sheet size 20” x 25”. Black.
Sold sheet. From Vibram.
Item No. ð426010000
h.
Vibram® Cherry
Composed of soft rubber, the Cherry sheet features excellent abrasion and slip resisting characteristics. 11.4”
x 35.8”. Black. Sold sheet. From Vibram.
Thickness
4mm
6mm
Item No. ð
401310040401310060
106
Sheet Goods
F a b r ic a t io n
a.
Vibram® Lisk Newflex
FABRICATION
Provides softness, is lightweight and has excellent slip-resistance, abrasion and elasticity. 50% lighter than
rubber. Extremely resilient with great “bounce”, providing foot support with great comfort. Durable. Can
be bonded using neoprene adhesive. It is designed for orthopedic, comfort and casual shoes. Sheet size 22”
x 27.5”. Sold sheet. From Vibram.
Thickness
5mm
8mm
10mm
Black
487010050487010080487010100
Brown
487020050487020080487020100
WhIte
487080050487080080487080100
Beige
487090050487090080487090100
FOAM SHEETS
b.
AliPlast™
A cross-linked, polyethylene foam excellent for padding and cushioning splints, casts and orthoses. Heat
moldable, non-toxic and non-allergenic. Sold sheet.
Type
Durometer Thick
Unit
Size
Color
Item No.ò
AliPlast™ 4E
23
1/8”
Sheet
30” x 36”
White
ALP-4E18-SH
23
3/16”
Sheet
30” x 36”
White ALP-4E316-SH
23
1/4”
Sheet
30” x 36”
White ALP-4E14-SH
23
1/2”
Sheet
30” x 36”
White
ALP-4E12-SH
23
1/8”
4 Sh/Case
18” x 24”
White
ALP-4E18-SHSA*
23
1/8”
Roll
30” x 120’
White
ALP-4E18-R120
Self Adhesive
23
1/4”
Roll
30” x 80’
White
ALP-4E14-R80
23
1/4”
Roll
30” x 100’
White
ALP-4E14-R100
23
3/16”
Roll
30” x 100’
White
ALP-4E316-R100
23
3/16”
Roll
250 sq. ft.
White
388-361
AliPlast™ 6A
34
1/8”
Sheet
24” x 29”
White
ALP-6A18-SH
34
1/4”
Sheet
24” x 29.5”
White
ALP-6A14-SH
34
1/8”
Sheet
24” x 31.5”
Buff
ALP-6A18-SH-BUFF
34
1/8”
Roll
29” x 81.4’
White
ALP-6A18-R80
34
1/8”
Roll
30” x 100’
Buff ALP-6A18-R100-BUFF
AliPlast™ 10
60
1/8”
Sheet
24” x 30.5”
White
ALP-1018-SH
60
1/8”
Sheet
25” x 30”
Buff
ALP-1018-SH-BUFF
60
1/8”
Roll
30” x 40’
White
ALP-1018-R40
60
1/8”
Roll
30” x 40’
Buff
ALP-1018-R40-BUFF
AliPlast XPE™
68
3/16”
Sheet
29” x 32”
Ivory
ALP-XP316-SH
68
3/18”
Sheet
29” x 32”
Ivory
ALP-XP38-SH
68
9/16”
Sheet
29” x 32”
Ivory
ALP-XP916-SH
*ALP-4E18-SHSA sold case of 4 sheets.
FABRIC ATION
c.
Sheet Goods
107
P-Cell®
Acor’s closed cell EVA foam. Sold sheet.
Durometer: 15-20
Heating Tem: 225-275 F
Grindable: Yes
Thickness
1/16”
(3 Iron)
1/8”
(6 Iron)
Sheet Size: 37” X 30”
Heat Time: 2-3 Min
3/16”
(9 Iron)
1/4”
(12 Iron)
Item No. ð
Thickness
3/8”
(18 Iron)
1/2”
(24 Iron)
3/4”
(36 Iron)
FABRICATION
Specifications
1”
(48 Iron)
Item No. ð
d.
Plastazote®
A closed cell, cross linked polyethylene foam. Sold sheet.
Plastazote® #1 (Medium)
Thickness
Pink
Grindable: Yes
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
PTZ-1-116-SPTZ-1-125-SPTZ-1-316-SPTZ-1-250-S
White
PTZ-1-116-S-WHPTZ-1-125-S-WHPTZ-1-316-S-WHPTZ-1-250-S-WH
Black
PTZ-1-116-S-BKPTZ-1-125-S-BKPTZ-1-316-S-BKPTZ-1-250-S-BK
Thickness
Pink
3/8”
(18 Iron)
1/2”
(24 Iron)
3/4”
(36 Iron)
1”
(48 Iron)
PTZ-1-380-S PTZ-1-500-S PTZ-1-750-SPTZ-1-1000-S
White
PTZ-1-380-S-WH PTZ-1-500-S-WH PTZ-1-750-S-WHPTZ-1-1000-S-WH
Plastazote® #2 (Firm)
Thickness
Grindable: Yes
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
White
Black
Thickness
White
3/8”
(18 Iron)
1/2”
(24 Iron)
3/4”
(36 Iron)
1”
(48 Iron)
PTZ-2-380-S-WH PTZ-2-500-S-WH PTZ-2-750-S-WHPTZ-2-1000-S-WH
Black
PTZ-2-380-S-BK PTZ-2-500-S-BK PTZ-2-750-S-BKPTZ-2-1000-S-BK
Plastazote® #3 (Rigid)
Thickness
Grindable: Yes
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
White
Black
Thickness
3/8”
(18 Iron)
1/2”
(24 Iron)
White
PTZ-3-380-S-WHPTZ-3-500-S-WH
Black
PTZ-3-380-S-BKPTZ-3-500-S-BK
108
Sheet Goods
F a b r ic a t io n
FOAM SHEETS — Continued
a.
Pressure Sensitive Plastazote®
FABRICATION
Sold sheet.
Description
Pink
White
1/8” x 30” x 40”
23000362300030
3/16” x 30” x 40”
2300035N/A
1/4” x 30” x 40”
2300034N/A
1/4” x 40” x 40”
2300033
N/A
b.
Ultra Cloud
A unique soft lightweight thermomoldable EVA that provides long lasting shock absorbing protection. May
be used against the skin as a top cover or padding. Sold sheet. From SoleTech.
Specifications
Durometer: 17-20
Heating Temp: 175-250 F
Thickness
1/4” (12 Iron)
1/8” (6 Iron)
3/16” (9 Iron)
3/8” (18 Iron)
1/2” (24 Iron)
Black
8506101800
N/A
851210180085181018008524101800
White
8506301800
N/A
851230180085183018008524301800
Medical Blue
85065018008509501800851250180085185018008524501800
c.
Cloud EVA®
A durable and thermomoldable moderate density EVA that provides excellent support and shock absorbing
protection. Holds its flexibility after molding. Good grindability. Sold sheet. From SoleTech.
Specifications
Thickness
Durometer: 35-40
1/8”
(6 Iron)
1/4”
(12 Iron)
3/8”
(18 Iron)
1/2”
(24 Iron)
5/8”
(30 Iron)
1”
(48 Iron)
Black
8106101800 8112101800 8118101800 81241018008130101800 8148101800
Brown
8106201800 8112201800 8118201800 81242018008130201800 8148201800
White
8106301800 8112301800 8118301800 81243018008130301800 8148301800
Almond
8106411800 8112411800 8118411800 81244118008130411800N/A
Medical Blue 8106501800 8112501800 8118501800 81245018008130501800N/A
Brite Red
8106611800 8112611800 8118611800 81246118008130611800N/A
Gray
8106701800 8112701800 8118701800 81247018008130701800N/A
d.
Cloud 45
A durable, thermomoldable moderate density EVA with a Shore A hardness between Cloud and SolFlex.
Provides both support and flexibility. Sold sheet. From SoleTech.
Specifications
Durometer: 43-48
Thickness
1/8” (6 Iron)
White
8606301800861230180086183018008624301800
Medical Blue
8606501800861250180086185018008624501800
Brite Red
N/A
1/4” (12 Iron)
3/8” (18 Iron)
1/2” (24 Iron)
8612611800N/A
N/A
FABRIC ATION
e.
Sheet Goods
109
Microcel Puff® Lite
A lightweight, heat moldable EVA foam with excellent shape retention. Sold sheet. From Acor.
Thickness
Light Blue
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
3/8”
(18 Iron)
PUFF-00249 PUFF-00083 PUFF-00250PUFF-00082 PUFF-00252
Thickness
Light Blue
1/2”
(24 Iron)
5/8”
(30 Iron)
3/4”
(36 Iron)
1”
(48 Iron)
FABRICATION
Microcel Puff® Lite
PUFF-00081 PUFF-00255PUFF-00296 PUFF-00297
f.
Microcel Puff®
A medium density, heat moldable EVA foam with excellent shape retention. Sold sheet. From Acor.
Microcel Puff®
Thickness
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
3/8”
(18 Iron)
Aqua
PUFF-00097PUFF-00098PUFF-00116PUFF-00110 PUFF-00117
Blue/Black/Aqua
Black
Black Ice
Blue
Forest Green
Green
Green/Purple/White
Pink
Pink/Purple/White
Purple
Storm
White
Yellow
PUFF-00244PUFF-00246 PUFF-00247PUFF-00120 PUFF-00269
Yellow/Red/Blue/Green
PUFF-00072PUFF-00080PUFF-00233PUFF-00115 PUFF-00389
Thickness
Aqua
1/2”
(24 Iron)
5/8”
(30 Iron)
3/4”
(36 Iron)
1”
(48 Iron)
Blue/Black/Aqua
Black
Black Ice
Blue
Forest Green
Green
Green/Purple/White
Pink
Pink/Purple/White
Purple
Storm
White
Yellow
Yellow/Red/Blue/Green
11 0 Sheet Goods
F a b r ic a t io n
a.
Firm Microcel Puff®
FABRICATION
A firm density, heat moldable EVA foam with excellent shape retention. Sold sheet. From Acor.
Firm Microcel Puff®
Thickness
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
Black
Brown
Red
Rust
Sand Camouflage
White
Thickness
3/8”
(18 Iron)
1/2”
(24 Iron)
5/8”
(30 Iron)
3/4”
(36 Iron)
Black
Brown
Red
Rust
Sand Camouflage
White
b.
Extra Firm Microcel Puff®
An extra firm density, heat moldable EVA foam with excellent shape retention. Sold sheet. From Acor.
Extra Firm Microcel Puff®
Thickness
Black
1/16”
(3 Iron)
1/18”
(6 Iron)
3/16”
(9 Iron)
1/4”
(12 Iron)
Thickness
3/8”
1/2”
5/8”
(18 Iron)
(24 Iron)
(30 Iron)
Black
PUFF-00181PUFF-00087 PUFF-00096
c.
Impression Puff™
Sold sheet. From Acor.
Impression Puff
Thickness
Black
41” x 32”
Black lined with X-Static®
40” x 29”
White lined with X-Static ® 40” x 29”
1/16”
(3 Iron)
Sheet Size: Varies
1/8”
(6 Iron)
3/16”
(9 Iron)
PUFF-00437PUFF-00438N/A
XSPUFF-00012XSPUFF-00010N/A
N/A
XSPUFF-00007 XSPUFF-00008
FABRIC ATION
d.
Sheet Goods
111
Pe-Lite™ (Soft)
A lightweight soft density polyethylene foam sheet. Soft, non-allergenic, non-absorbent. 39” x 39” sheet
size. Sold sheet. From Fillauer.
3/16”
(5mm)
5/16”
(8mm)
3/8”
(10mm)
1/2”
(13mm)
FABRICATION
Non-Perforated1/8”
(3mm)
PLTS-N03WHPLTS-N05WHPLTS-N08WHPLTS-N10WHPLTS-N13WH
White
Ventilated3/16”
(5mm)
PLTS-V05WH
White
e.
Pe-Lite™ (Medium)
A lightweight medium density polyethylene foam sheet. Soft, non-allergenic, non-absorbent. 39” x 39” sheet
Non-Perforated1/8”
(3mm)
3/16”
(5mm)
5/16”
(8mm)
3/8”
(10mm)
1/2”
(13mm)
PLTM-N03WHPLTM-N05WHPLTM-N08WHPLTM-N10WHPLTM-N13WH
White
Yellow
N/APLTM-N05YEN/A
N/A
N/A
Perforated
1/8”
3/16”
(3mm)
(5mm)
White
PLTM-P03WHPLTM-P05WH
Ventilated
1/8”
3/16”
(3mm)
(5mm)
PLTM-V03WHPLTM-V05WH
White
f.
Pe-Lite™ (Firm)
A lightweight firm density polyethylene foam sheet. Soft, non-allergenic, non-absorbent. 39” x 39” sheet
Non-Perforated 1/8”
(3mm)
3/16”
(5mm)
5/16”
(8mm)
3/8”
(10mm)
1/2”
(13mm)
5/8”
(18mm)
White
PLTF-N03WHPLTF-N05WHPLTF-N08WH PLTF-N10WHPLTF-N13WH PLTF-N18WH
Pink
PLTF-N03PKPLTF-N05PKPLTF-N08PK PLTF-N10PKPLTF-N13PKN/A
Caucasian
PLTF-N03CAPLTF-N05CAN/A
Beige
PLTF-N03BGPLTF-N05BGN/A
Marbled Red
N/A
DISCONN/A
N/APLTF-N13CAN/A
N/A
N/A
N/A N/A
N/A
N/A
Marbled Blue
N/A
PLTF-N05MBN/A
N/A
N/A
N/A
Perforated
1/8”
(3mm)
3/16”
(5mm)
PLTF-P03WHPLTF-P05WH
White
Ventilated
White
1/8”
(3mm)
3/16”
(5mm)
PLTF-V03WHPLTF-V05WH
112 Sheet Goods
F a b r ic a t io n
a.
Pe-Lite™ (Extra Firm)
FABRICATION
A lightweight firm density polyethylene foam sheet. Soft, non-allergenic, non-absorbent. 26” x 26” sheet
Non-Perforated
1/16”
1/8”
(1.5mm)
(3mm)
White
PLTX-N15WHPLTX-N03WH
Perforated
1/16”
1/8”
(1.5mm)
(3mm)
White
PLTX-P15WHPLTX-P03WH
b.
EFM™
A very rigid, heat moldable EVA. Sheet size 36” x 22”. 75 durometer. Black. Sold sheet. From Acor.
Thickness
1/8”
1/4”
Item No. ð
SDUR-00247SDUR-00248
c.
J-Foam Swirl
EVA Foam used for foot orthoses and prosthetic devices, orthotic posting, and heel lifts. May be used as
a base, middle layer, or top cover for many foot orthoses, and is highly resilient and washable. Sold sheet.
From JMS Plastics.
Thickness
2mm
3mm
Purple Swirl
169-10-02169-10-03
Red Swirl
169-20-02169-20-03
Watercolor Swirl
169-30-02169-30-03
Spirit Swirl (red, white and blue)
169-40-02169-40-03
d.
MP Foam 55
MP Foam 55 is a Shore A 40º hardness. It is easily molded and ground to finish. As in all the MP Foams, MP
55 is 100% EVA which provides superior mold retention. Sheet size 44” x 17.5”. White. Sold sheet. From
MatPlus Products.
Item No. ð
MP55W-0500-S
FABRIC ATION
e.
Sheet Goods
113
NickelPlast™
Three grades. Sold sheet. From AliMed.
Durometer: 42 ± 3
Heating Temp: 300-350° F Heating Time: 2-3 Min
FABRICATION
NickelPlast-Lite™ Thickness
3/16”
3/8”
White
4820N/A
Blue
48214823
NickelPlast-S™ Durometer: 45
Thickness
1/8”
3/16”
1/4”
Balsa
4791-AM4792-AM 4793-AM
NickelPlast X-Firm™
Durometer: 55
Thickness
1/8”
Brown
4801 4802 48034804 4805
3/16”
1/4”
3/8”
1/2”
f.
QuikForm®
QuikForm® is thin, flexible and easily heat molded or vacuum formed. This material is an impregnated fiber
resin and is self adherent for some applications; it can be glued if needed. Layers can be combined for added
support. QuikForm® is impervious to perspiration and moisture. 1.6mm thickness. From Acor.
Description
QuikForm®QuikForm® Firm
Molding Temp
250°-275° F
350° F
Heat Time
1-1.5 Min
2-3 Min
Sheet Size
40” x 20”
36” x 18”
Item No. ð
g.
PORON Medical® Urethane
Non-moldable cellular urethane. Medium density, microcellular (cells are roughly 100 microns in diameter)
foam material. Sold sheet. From Acor.
Abraded 2 Sides
BlueBlueBlueBlueTan Tan
30” x 18”
36” x 30”
42” x 18”
42” x 36”
42” x 18”
36” x 30”
1/16”
PORS-00010PORS-00036
N/A
N/A
N/APORS-00058
1/8”
N/A
N/A
N/APORS-00619
PORS-00628PORS-00035N/A
N/A
N/A
N/A
1/4” Abraded 1 Side
30” x 18”
38” x 36”
42” x 18”
42” x 36”
42” x 18”
42” x 36”
1/16”
1/8”
1/4”
N/A
N/A
PORS-00003 PORS-00029PORS-00026 PORS-00043
N/A
N/A
N/A
N/A
PORS-00002 PORS-00028 PORS-00125* PORS-00045
N/A
N/A
3/8”
Unabraded
38” x 18”
36” x 30”
42” x 18”
42” x 36”
42” x 18”
42” x 36”
1/16”
N/A
N/A
1/8”
N/A
N/A
1/4”
3/8”
N/A
N/A
N/A
N/A
PORS-00012PORS-00038N/A
N/A
*PORS-00125 sheet size is 27” x 18”.
11 4 Sheet Goods
F a b r ic a t io n
a.
Slow Recovery Urethane (SRU)
FABRICATION
Non-moldable cellular urethane (poron medical grade). Patina (sea foam green) color. Sold sheet. From Acor.
Sheet Size
27” x 18”
Abraded 1 Side
1.5mm
27” x 36”
27” x 18”
Unabraded
Item No. ð
27” x 36”
27” x 18”
27” x 36”
1.5mm
3mm
3mm
6mm
6mm
PORX-00019 PORX-00018 PORX-00010 PORX-00009PORX-00005 PORX-00001
b.
Thermo HK
Fibrous thermoplastic reinforcement. Available with adhesive on one side or both. 1.3mm thickness. Sheet
size: 40” x 27”. Cream color. From UCO International.
Description
Item No.ò
Adhesive One Side
32/0029-311
Adhesive Two Sides
32/0029-312
c.
ThermoKnit
Fibrous thermoplastic reinforcement. 1.1mm thickness. Sheet size 40” x 40”. Sold sheet. Cream color. From
UCO International.
Item No. ð
32/0024-210
d.
UCOlen 60
Semi-rigid, elastic copolymer foam. Base for foot orthotics where substantial control in a lightweight device
is required. Posting material. From UCO International.
Specifications
Durometer: 60-65 Shore A Sheet Size: 37” x 23”
Thickness
6mm
8mm
10mm
15mm
Item No. ð
30/0812-80630/0815-80830/0818-81030/0830-815
FABRIC ATION
e.
Sheet Goods
115
UCOlite®
White. Also available in other colors. Sold sheet. From UCO International.
Heating Time: 1 Min/mm
Thickness2mm 3mm 4mm 5mm 7mm 10mm
FABRICATION
Specifications
White
Perforated
32/0033-20232/0033-20332/0033-204 32/0033-20532/0033-207 32/0033-210
Non-Perf’d
32/0031-20232/0031-20332/0031-204 32/0031-20532/0031-207 32/0031-210
Blue
Perforated
32/0052-202 32/0052-203 32/0052-204 32/0052-20532/0052-207 32/0052-210
Non-Perf’d
32/0050-202 32/0050-203 32/0050-204 32/0050-20532/0050-207 32/0050-210
Brown
Perforated
32/0057-202 32/0057-203 32/0057-204 32/0057-20532/0057-207 32/0057-210
Non-Perf’d
32/0056-202 32/0056-203 32/0056-204 32/0056-20532/0056-207 32/0056-210
Black
Perforated
32/0065-202 32/0065-202 32/0065-204 32/0065-20532/0065-207 32/0065-210
Non-Perf’d
32/0064-202 32/0064-202 32/0064-204 32/0064-20532/0064-207 32/0064-210
f.
UCO XPE
Base for foot orthotics where moderate control is required. Durometer: 55° Shore A. Sheet size: 29” x 32”.
Sold sheet. Cream color.
Thickness
3/8”
3/16”
Item No. ð
30/4816-21030/4815-205
g.
Volara® 4E
Volara® 4E is a soft density, closed cell foam padding material that won’t absorb perspiration, bacteria or
odors. It is used as a lining for body jackets and lower extremity orthoses, including its use as a cushioning
for orthotics. Sheet size 30” x 36”. Sold sheet. From Acor.
Thickness 1/8”
3/16”
1/4”
1/16”
SDUR-00055SDUR-00072 SDUR-00050
11 6 Sheet Goods
F a b r ic a t io n
a.
XPE
FABRICATION
A cross-linked, polyethylene foam excellent for padding and cushioning splints, casts and orthoses. Heat
moldable, non-toxic and non-allergenic. Sheet size: 29” x 32”. Cream color.
Thickness
9/16”
3/8”
3/16”
Item No. ð
ALP-XP916-SHALP-XP38-SHALP-XP316-SH
b.
20 PPI Retic Polyur Foam
Sheet size: 36” x 50”. Sold sheet.
Item No. ð
20PPICHARCOAL
FABRIC COVERED SHEETS
c.
PPT®
A medical grade soft-tissue supplement for cushioning, shock absorption and friction reduction. Lightweight
and resilient. Abraded one side. Smooth, Mesh or Ultralux second side. Blue or tan. 30” x 36” sheet size. Sold
sheet. From Aetrex.
Color
Thickness
Smooth
Mesh
Ultralux
Blue
1/16”
PPTS-116-SAB PPTS-116-MABPPTS-116-ULAB
1/8”
PPTS-125-SAB PPTS-125-MABPPTS-125-ULAB
1/4”
PPTS-250-SABN/A
N/A
Tan
1/16”
PPTS-116-SATPPTS-116-MAT
N/A
1/8”
PPTS-125-SATPPTS-125-MAT
N/A
1/4”
PPTS-250-SATN/A
N/A
d.
Soft Sponge™
A closed-cell foam with a suede-like feel. Adhesive backing bonds well with thermoplastic materials. Beige.
Sheet size 18” x 24”. Sold sheet. From AliMed.
Thickness
1/8”
1/4”
Item No. ð
44454446-AM
FABRIC ATION
e.
Sheet Goods
117
Neoprene Sheets
Cost effective generic neoprene available in two varieties. Sheet size 51” x 83”. Black only. Sold sheet. From
WBC Industries.
FABRICATION
Description
1.5mm
3mm
5mm
Nylon Both Sides
15MM/N3MM/N 5MM/N
Hook Compatible UBL (unbroken Loop)
15MM/UBL3MM/UBL 5MM/UBL
f.
Urethane with Fabric Top Cover
Non-moldable cellular urethane (poron medical grade) with fabric top cover. Blue. Sold sheet. From Acor.
Sheet Size 30” x 18”
30” x 18”
30” x 36”
1/16”
N/A
1/8”
PORS-00055
N/APORS-00054
g.
Urethane Lined with X-Static®
Non-moldable cellular urethane (poron medical grade) with fabric top cover lined with X-Static ® —the Silver
Fiber™. Sheet size 27” x 36”. Sold sheet. From Acor.
Thickness
1/16”
1/18”
Abraded 1 Side
XSPORS-00003XSPORS-00004
Unabraded
XSPORS-00006XSPORS-00005
h.
Neoprene
Neoprene with a colored nylon top cover. Second side smooth. Sold sheet.
Thickness
1/16”
1/8”
Red Wine
N/A
NEORED18
Royal Blue
NEOROY16NEOROY18
Black
NEOBLK16NEOBLK18
Green
N/ANEOGRN18
11 8 Sheet Goods
F a b r ic a t io n
FABRIC COVERED SHEETS — Continued
a.
Neo-Sponge™
FABRICATION
A fabric covered synthetic rubber material with great durability and resilience. Blue fabric or X-Static® top
cover. Sold sheet. From Acor.
Thickness
3 Iron
(1/16”)
3 Iron
(1/16”)
Sheet Size
42” x 24”
42” x 48”
Blue Fabric Top Cover
N/A
N/A
6 Iron
(1/8”)
6 Iron
(1/8”)
42” x 24”
42” x 48”
XSSDUR-00018XSSDUR-00017XSSDUR-00007XSSDUR-00012
X-Static® Top Cover
DUAL LAMINATES
b.
Diab-A-Sheet®
A combination of PPT® and Plastazote® medium designed to provide maximum protection for patients with
diabetes and arthritis. Sold sheet. From Aetrex.
Description
Total Thick
Sheet Size
Item No.ò
1/16” PPT + 1/8” Plastazote Medium
3/16”
19” x 29”
7701613
1/8” PPT® + 1/8” Plastazote® Medium
1/4”
19” x 29”
7701614
1/8” PPT® + 1/4” Plastazote® Medium
3/8”
19” x 29”
7701615
®
®
c.
ThermoSKY + PPT®
Sold sheet. From Aetrex.
Item No.ò
Description
Total Thick
Sheet Size
1/8” ThermoSKY + 1/16” PPT
3/16”
30” x 36”
7711613
1/8” ThermoSKY + 1/8” PPT
1/4”
30” x 36”
7711614
d.
ThermoSKY + Plastazote
Description
Total Thick
Sheet Size
Item No.ò
1/4” ThermoSKY + 1/8” Plastazote
3/16”
30” x 36”
7161615
FABRIC ATION
e.
Sheet Goods
119
Orthacor™
4-lb density + 10-lb density. Sold sheet. From Acor.
Total Thick
Sheet Size
Item No.ò
1/8” Blue + 1/8” White
1/4”
36” x 27”
SDUR-00016
FABRICATION
Description
f.
Plastazote® + PORON Medical® Urethane
Total Thick
Sheet Size
Item No.ò
1/8” Plastazote® + 1.5mm Blue PORON Medical® Urethane
3/16”
39” x 14”
DISCON
PZPN-00006
Description
1/8” Plastazote + 1.5mm Blue PORON Medical Urethane
3/16”
39” x 28”
1/8” Plastazote® + 1.5mm Blue PORON Medical® Urethane
3/16”
40” x 20”
PZPN-00036
1/8” Plastazote® + 3mm Blue PORON Medical® Urethane
1/4” 37” x 28”
PZPN-00007
®
®
3/8”
37” x 14”
DISCON
3/8”
37” x 28”
PZPN-00005
g.
Medium Pink Plastazote® + Firm White Plastazote®
Pink over white. Sold sheet. From Acor.
Description
Total Thick
Sheet Size
Item No.ò
1/16” #1 Pink Plastazote® + 1/16” #2 White Plastazote®
1/8”
33” x 29”
PLZT-00071
1/8” #1 Pink Plastazote® + 1/8” #2 White Plastazote®
1/4”
33” x 29”
PLZT-00069
1/4” #1 Pink Plastazote® + 1/4” #2 White Plastazote® 1/2”
33” x 29”
PLZT-00070
h.
Medium Pink Plastazote® + Slow Recovery Urethane (SRU)
Description
Total Thick
Sheet Size
Item No.ò
1/8” #1 Pink Plastazote® + 3mm SRU
1/4”
18” x 27”
DISCON
1/8” #1 Pink Plastazote + 3mm SRU
1/4”
36” x 27”
PZPN-00012
®
12 0
Sheet Goods
F a b r ic a t io n
DUAL LAMINATES — Continued
a.
DUOlite
FABRICATION
Dual density lamination of UCOlite and Purolon. 4mm thickness. Sold sheet. From UCO International.
Description
Sheet Size
Item No.ò
DUOlite
22” x 44”
33/5631
TRI LAMINATES
b.
P-Cell® + PORON® Urethane + Blue Microcel Puff®
Total Thick
Sheet Size
Item No.ò
1/8” P-Cell® + 1.5mm Blue PORON® Urethane + 1/8” Blue Puff
5/16”
37” x 30”
MDUR-00083
1/8” P-Cell® + 1.5mm Blue PORON® Urethane + 1/4” Blue Puff
7/16”
37” x 30”
MDUR-00084
1/4” P-Cell + 1.5mm Blue PORON Urethane + 1/8” Blue Puff
7/16”
37” x30”
MDUR-00085
1/8” P-Cell® + 3mm Blue PORON® Urethane + 1/8” Blue Puff
3/8”
37” x 30”
MDUR-00086
Description
®
®
c.
P-Cell® + Slow Recovery Urethane (SRU) + Blue Microcel Puff®
Description
Total Thick
Sheet Size
Item No.ò
1/8” P-Cell® + 1/8” SRU + 1/8” Blue Puff
3/8”
36” x 27”
MDUR-00082
d.
Plastazote® + Blue PORON® Urethane + Microcel Puff®
Description
Total Thick
Sheet Size
Item No.ò
1/8” Pink Plastazote + 1.5mm Urethane + 1/8” Blue Puff
5/16”
37” x 30”
MDUR-00001
1/8” Pink Plastazote® + 1.5mm Urethane + 1/4” Blue Puff
7/16”
37” x 30”
MDUR-00002
1/4” Pink Plastazote® + 1.5mm Urethane + 1/8” Blue Puff
7/16”
37” x 30”
MDUR-00003
1/8” Pink Plastazote + 3mm Urethane + 1/8” Blue Puff
3/8”
37” x 30”
MDUR-00058
®
®
FABRIC ATION
e.
Sheet Goods
121
Microcel Puff® + EFM™ + Microcel Puff®
Total Thick
Sheet Size
Item No.ò
1/8” Blue Puff + 1/8” EFM™ + 1/8” Blue Puff
3/8”
37” x 20”
MDUR-00006
FABRICATION
Description
f.
Plastazote® + Slow Recovery Urethane (SRU) + Blue Microcel Puff®
Pink over patina over blue. Sold sheet. From Acor.
Description
Total Thick
Sheet Size
Item No.ò
3/8”
36” x 27”
MDUR-00008
1/8” #1 Plastazote® + 3mm SRU + 1/8” Blue Microcel Puff ®
g.
TriLam®
Description
Total Thick
Sheet Size
Item No.ò
1/16” Pink Puff + 1.5mm PORON Urethane + 1/8” Pink Puff
1/4”
37” x 30”
TRLM-00001
1/16” BBA* Puff + 1.5mm PORON® Urethane + 1/8” BBA Puff
1/4”
37” x 30”
TRLM-00007
1/16” Blue Puff + 1.5mm PORON® Urethane + 1/8” Blue Puff
1/4”
37” x 30”
TRLM-00003
1/16” White Puff + 1.5mm PORON Urethane + 1/8” White Puff
1/4”
37” x 30”
TRLM-00005
1/16” Pink Puff + 1/16” SRU + 1/8” Pink Puff
1/4”
36” x 27”
TRLM-00009
®
®
*Blue/Black/Aqua.
h.
ThermoSKY + PPT® + Plastazote® Medium
Total Thick
Sheet Size
Item No.ò
1/16” ThermoSKY + 1/16” PPT® + 1/8” Plastazote® Medium
1/4”
30” x 34”
7731614
1/8” ThermoSKY + 1/16” PPT + 1/8” Plastazote Medium
5/16”
30” x 34”
7731615
1/8” ThermoSKY + 1/16” PPT® + 1/4” Plastazote® Medium
7/16”
30” x 34”
7731617
Description
®
®
12 2
Sheet Goods
F a b r ic a t io n
TRI LAMINATES – Continued
a.
ThermoSKY + PPT® + ThermoSKY
FABRICATION
Description
Total Thick
Sheet Size
Item No.ò
1/16” ThermoSKY + 1/16” PPT® + 1/8” ThermoSKY
1/4”
30” x 34”
7742624
1/8” ThermoSKY + 1/16” PPT + 1/8” ThermoSKY
5/16”
30” x 34”
7742625
®
BLOCKERS
b.
Acor Blockers
Blockers are pre-laminated, pre-skived sheets of material that, when heated, allow you to fabricate a pair of
custom foot orthotics quickly and easily. The rear portion is thicker than the forefoot, allowing for grinding
of posting and edges of the orthoses. Approximate sheet size 11” x 14”. Sold sheet. From Acor.
Single Durometer Blockers
35 Durometer Blue Microcel Puff ®
Item No.ò
BLOX-00003
55 Durometer MultiCork™
BLOX-00025
Dual Durometer Blockers
Item No.ò
LD45 Pink Plastazote + LD70 white Plastazote BLOX-00004
35 Durometer Blue Microcel Puff ® + EFM™
BLOX-00005
Patina SRP™ + 35 Durometer Blue Microcel Puff ®
BLOX-00078
®
®
20 Durometer P-Cell + 35 Durometer Blue Microcel Puff BLOX-00168
®
®
Black X-Static® Impression Puff™ + 35 Durometer Blue Microcel Puff ®
BLOX-00169
Multi-Durometer Blockers
Fabric + PORON® Urethane + 35 Durometer Blue Microcel Puff ®
Item No.ò
BLOX-00014
20 Durometer P-Cell® + PORON® Urethane + 35 Durometer Blue Microcel Puff ®
BLOX-00072
LD45 Pink Plastazote® + PORON® Urethane + 35 Durometer Blue Microcel Puff ®
BLOX-00007
LD45 Pink Plastazote® + PORON® Urethane + LD45 Pink Plastazote® BLOX-00006
LD45 Pink Plastazote® + PORON® Urethane + 55 Durometer MultiCork™
BLOX-00081
35 Durometer Blue Microcel Puff ® + EFM™ + 35 Durometer Blue Microcel Puff ®
BLOX-00009
35 Durometer Blue Microcel Puff ® + PORON® Urethane + 35 Durometer Blue Microcel Puff ® BLOX-00011
35 Durometer Blue Microcel Puff ® + PORON® Urethane + 55 Durometer MultiCork™
BLOX-00013
35 Durometer BBA* Puff + PORON® Urethane + 35 Durometer BBA* Puff
BLOX-00012
35 Durometer BBA* Puff + EFM™ + 35 Durometer BBA* Puff
BLOX-00010
*Blue/Black/Aqua.
c.
UCOkork Quick-Post Strips
Pre-shaped wedges of UCOkork. 13” x 4’ x6mm. No adhesive backing. 10/case. From UCO International.
Item No. ð
22/1346
FABRIC ATION
Sheet Goods
123
PROSTHETIC CONES
d.
Pe-Lite® Prosthetic Cone
Length
Prox
Distal Thickness Beige
Size
Circumf* Circumf*
Single
1
12”
14”
8”
White
Single
White
3/Box
5mm
127825127824127894127852
127839127838127934127935
1
14”
14”
8”
5mm
2
12”
16”
10”
5mm
127827127826127902127860
2
14”
16”
10”
5mm
127833127832127936127944
3
12”18”12”5mm
127829127828127910127878
3
14”
18”
12”
5mm
127835127834127951127969
4
12”
20”
14”
5mm
127831127830127928127886
4
14”20”14”5mm
127837127836127977127985
e.
Beige
3/Box
FABRICATION
Sold individually or 3 per box in beige or white. From Fillauer.
*Circumference measured 1” from end.
TriLam® Prosthetic Cone
A multi-durometer, prefabricated, high quality socket interface. Wide, sturdy seams are guaranteed not to
separate under heat or vacuum. Sold each. From Acor.
Length
Size
Prox
Circumf
Distal
Circumf
Pink
White
Tri-Color
1-14
14”
15-1/2”
9-1/2”
CNMD-00001CNMD-00004 CNMD-00003
CNMD-00009CNMD-00012 CNMD-00011
2-14
14”
16-3/4”
10-1/2”
3-14
14”
17-3/4”
10-3/4”
CNMD-00017CNMD-00020 CNMD-00019
4-14
14”
20-1/4”
12-1/4”
CNMD-00025CNMD-00028 CNMD-00027
1-16
16”
16-1/2”
9-1/2”
CNMD-00005CNMD-00008 CNMD-00007
2-16
16”
18”
10-1/2”
CNMD-00013CNMD-00016 CNMD-00015
3-16
16”
19”
10-3/4”
CNMD-00021CNMD-00024 CNMD-00023
4-16
16”
21-1/4”
12-1/4”
CNMD-00029CNMD-00032 CNMD-00031
FINISHING FOAM
f.
ProFormance® Finishing Foam
Sheet size 20” x 20”. White. Sold sheet.
Thickness
1.5”
1.8”
Item No. ð
PF-150PF-190
124
Sheet Goods
F a b r ic a t io n
THERMOPLASTICS
a.
Copolymer Polypropylene
FABRICATION
For use when greater flexibility and more crack resistance in cold temperatures is required. Stress-relieved.
Self adhesive when hot. Natural color. Also available in other colors. Sold sheet.
Sheet Size
3/32”
16” x 16”
16” x 32”
PPO-332-7
N/A 1/16”
24” x 24”
24” x 48”
32” x 48”
48” x 48”
PPO-332-4 PPO-332-3PPO-332-32 PPO-332-2
N/AN/AN/A
PPO-10-3N/A
N/A
1/8”
PPO-20-7N/APPO-20-4 PPO-20-3PPO-20-32 PPO-20-2
5/32”
3/16”
PPO-30-71871632CLPPO-30-4 PPO-30-3PPO-30-32 PPO-30-2
1/4”
1/2”
PPO-50-7
N/AN/AN/AN/A N/A
b.
Durr-Plex
32” x 48” sheet size. Sold sheet.
Thickness
3/16”
1/4”
Item No. ð
168125168202
c.
Kydex®
Used for chairback type spinal orthoses, Kydex® is an extremely rigid, impact and crack resistant acrylic/PVC
available in a variety of colors. Please specify color when ordering by adding the appropriate color code to
end of item number: black (-BL), white (-WH), flesh (-FL), ivory (-IV), beige (-BG), gray (-GY), navy blue (-NB),
royal blue (-RB), red (-RD). Sold sheet.
Sheet Size
16” x 16”
24” x 24”
24” x 36”
24” x 48”
32” x 48”
48” x 48”
1/16”
KDX-10-7 KDX-10-4KDX-10-24KDX-10-3KDX-10-32 KDX-10-2
3/32”
KDX-332-7 KDX-332-4 KDX-332-24 KDX-332-3KDX-332-32 KDX-332-2
1/8”
3/16”
1/4”
FABRIC ATION
d.
Sheet Goods
125
PETG / Copolyester
PETG vacuum forms with very fine detail, is extremely rigid even at working temperatures and self adhesive
when hot. Clear. Sold sheet.
12” x 12”
16” x 16”
24” x 24”
24” x 36”
24” x 48”
32” x 48”
48” x 48”
N/A
PETG-20-7 PETG-20-4PETG-20-24PETG-20-3PETG-20-32PETG-20-2
3/16”
N/A
PETG-30-7
N/A
PETG-40-7PETG-40-4
1/4”
3/8”
PETG-38-6PETG-38-7
N/A
N/A
N/A
PETG-30-3PETG-30-32PETG-30-2
N/A
N/A
FABRICATION
Sheet Size
1/8”
1/2”
PETG-50-6 PETG-50-7 PETG-50-4PETG-50-24PETG-50-3PETG-50-32PETG-50-2
Sheet Size
18” x 18”
1/2”
PETG-50-18
e.
Proflex
Proflex is an excellent flexible socket material which is vacuum formable, transparent in color and self adhesive when hot. Sold sheet.
Sheet Size
16” x 16”
24” x 24”
24” x 36”
PFLX-40-7
N/A
3/8”
PFLX-38-7
N/A
1/2”
PFLX-50-7PFLX-50-4
1/4”
24” x 48”
32” x 48”
48” x 48”
PFLX-40-24 PFLX-40-3PFLX-40-32
N/A
PFLX-38-3PFLX-38-32
N/A
N/A
N/A
N/APFLX-50-32 N/A
f.
Proflex with Silicone
A flexible socket material, Proflex with Silicone is vacuum formable, transparent in color, self adhesive yet
less sticky when hot. Sold sheet.
Sheet Size
12” x 12”
16” x 16”
24” x 24”
24” x 48”
32” x 48”
48” x 48”
1/8”
N/APFLS-20-7N/A
PFLS-20-3PFLS-20-32 PFLS-20-2
3/16”
N/APFLS-30-7N/A
PFLS-30-3PFLS-30-32 PFLS-30-2
1/4”
PFLS-40-6 PFLS-40-7 PFLS-40-4 PFLS-40-3PFLS-40-32N/A
3/8”
PFLS-38-6 PFLS-38-7 PFLS-38-4 PFLS-38-3PFLS-38-32N/A
1/2”
PFLS-50-6PFLS-50-7PFLS-50-4
5/8”
N/A
PFLS-58-7
N/A
PFLS-58-4N/A
N/AN/A
N/A
N/A
g. Modified Polyethylene
Features a rigidity between copolymer and LDPE. Vacuum formable and slightly self adhesive when hot.
Natural color. Also available in black (-BL), white (-WH) or flesh (-FL). Sold sheet.
Sheet Size
16” x 16”
1/8”
N/A
24” x 36”
N/A
PEM-20-3PEM-20-32
24” x 48”
5/32”
PEM-157-7
N/A
PEM-157-3PEM-157-32 PEM-157-2
3/16”
PEM-30-7
N/A
PEM-30-3PEM-30-32
1/4”
PEM-40-7
N/A
PEM-40-3PEM-40-32
3/8”
PEM-38-7
N/A
N/A
N/A
1/2”
PEM-50-7
N/APEM-50-3N/A
N/A
N/A
32” x 48”
48” x 48”
N/A
N/A
N/A
126
Sheet Goods
F a b r ic a t io n
THERMOPLASTICS — Continued
a.
Friddle’s Modified Polyethylene
FABRICATION
Sold sheet. From Friddle’s Orthopedic.
Sheet Size
16” x 16”
309-146
1/4”
b.
Polyethylene LD
Low Density Polyethylene features minimal rigidity, is vacuum formable and self adhesive when hot. Translucent white. Sold sheet.
Sheet Size
16” x 16”
24” x 24”
24” x 48”
1/32”
N/A
N/A
LDPE-132-3
32” x 48”
48” x 48”
N/AN/A
3/32” N/AN/AN/A
LDPE-332-32
N/A
1/16”
LDPE-10-7 LDPE-10-4 LDPE-10-3LDPE-10-32 LDPE-10-2
1/8”
5/32”
3/16”
1/4”
3/8”
1/2”
c.
JMS 500 Polyethylene
A high molecular weight, high density polyethylene. Fleshtone color. 36” width. Sold sheet. From JMS Plastics.
Sheet Size
1.5mm
18.75” (4.7 sf)
N/A
2mm
2.5mm
3mm
3.5mm
4mm
5mm
50002F-2500025F-250003F-2500035F-250004F-2 50005F-2
37.5” (9.375 sf) 500015F-150002F-1500025F-150003F-1500035F-150004F-1 50005F-1
d.
Polyethylene HD SR
High Density Stress-Relieved Polyethylene is a rigid, crack resistant material which may be vacuum formed or
drape formed. Natural color. Also available in black (-BL), white (-WH) or flesh (-FL). Sold sheet.
Sheet Size
24” x 48”
32” x 48”
1/16”
HDPE-10-3HDPE-10-32
1/8”
HDPE-20-3HDPE-20-32
5/32”
HDPE-157-3HDPE-157-32
3/16”
HDPE-30-3HDPE-30-32
1/4”
HDPE-40-3HDPE-40-32
FABRIC ATION
e.
Sheet Goods
127
Polypropylene SR
Stress-Relieved Polypropylene has the ability to yield to pressure and torque. Vacuum formable. Self adhesive
when hot. Natural color. Sold sheet.
Sheet Size
16” x 24”
N/A
N/A
24” x 24”
N/APPSR-10-3N/A
24” x 48”
32” x 48”
48” x 48”
3/32”
N/A
N/A
N/A
1/8”
N/A
N/A
N/A
PPSR-20-3PPSR-20-32 PPSR-20-2
5/32”
N/A
N/A
N/A
PPSR-157-3PPSR-157-32 PPSR-157-2
N/A
PPSR-332-3PPSR-332-32 PPSR-332-2
3/16”
PPSR-30-7 PPSR-30-16 PPSR-30-4 PPSR-30-3PPSR-30-32 PPSR-30-2
1/4”
PPSR-40-7
N/A
3/8”
PPSR-38-7
N/A
PPSR-38-4PPSR-38-3
N/A
N/A
1/2”
PPSR-50-7
N/A
PPSR-50-4PPSR-50-3
N/A
N/A
FABRICATION
16” x 16”
1/16”
PPSR-40-4 PPSR-40-3PPSR-40-32 PPSR-40-2
PPSR-34-7
N/A
N/A N/AN/A N/A
3/4”
Sheet Size
3/16”
16” x 27”
48” x 96”
PPSR-30-27PPSR-30-1
f.
Polypropylene Welding Rod
3/16” diameter. Sold lb.
Item No. ðPRORWELD3500
g.
Orfitrans
A Styrene based prosthetic check socket material with unusually tough characteristics. Stiff, Soft and X-Soft
densities. Sold sheet.
Stiff
Thickness
6mm
8mm
12” x 12”
N/A
N/A
16’ x 16”
N/A
10mm
12mm
15mm
310-381310-121N/A
310-566310-386310-126 310-586
24” x 48”
310-142N/A310-382310-122 310-582
32” x 48”
310-143N/A
N/A N/A
N/A
48” x 48”
310-144N/A310-384310-124 310-584
Soft
Thickness
8.5mm
11.5mm
16” x 16”
315-386315-126
X-Soft
Thickness
6mm
9mm
12mm
Sheet Size
24” x 48”
16” x 16”
316-146316-386 316-126
48” x 48”
N/A
32” x 48”
48” x 48”
316-384N/A
12 8
Sheet Goods
F a b r ic a t io n
THERMOPLASTICS — Continued
a.
Surlyn®
FABRICATION
A flexible socket material with minimal rigidity. Vacuum formable and self adhesive when hot. Translucent.
Sold sheet.
Sheet Size
16” x 16”
1/16”
SL-10-7
24” x 36”
N/A
24” x 48”
SL-10-3SL-10-32
32” x 48”
1/8”
SL-20-7
N/A
SL-20-3SL-20-32
N/ASL-30-3 N/A
3/16”
SL-30-7
1/4”
SL-40-7 SL-40-24SL-40-3 SL-40-32
1/2”
SL-50-7
N/ASL-50-3 N/A
b.
Subortholen®
High strength fleshtone polyethylene that can be cold-formed as well as thermomolded. Lightweight, yet
rigid and strong with minimal creep. 39” x 39” sheet size. Sold sheet.
Thickness
Item No. ð
2mm
3mm
4mm
5mm
030-0202-00030-0203-00030-0204-00030-0205-00
c.
KISS® Soft Edge
Adheres to the edge of the proximal socket for superior suspension sleeve protection. 60” Strip. Beige or
black. Sold each. From KISS.
Thickness
Beige
Black
Item No. ð
CMP33/ACMP33/B
d.
3D-Lite™
3D-Lite is an open weave polyester material, impregnated with a non-toxic resin. It is woven three-dimensionally to: stretch in only one direction, give rigidity in all directions, give optimum draping and moldability,
provide a smooth surface, have less weight and more breathability for patient comfort and have no shrinkage.
It is moldable in 160° F (70°C). Beige. From Allard USA.
Thickness
1/8”
1/4”
3/16”
24” x 24” Sheet Size
473B1470B1 475B1
36” x 24” Sheet Size
474B1471B1 476B1
591W13D-Safe Soft Edging, 1.5” width, 10 meter roll
FABRIC ATION
e.
Sheet Goods
129
3D-Lite™ Cut-4-Custom
FABRICATION
When you need a custom LSO or TLSO now! Heat moldable front and back Cut-4-Custom sections become
soft and ready to mold to patient contours in less than 10 minutes. Both sections have straps pre-attached,
are sold separately and are interchangeable. When applying the pre-cuts, it is important to wrap the material
using either elastic wrap or a hospital abdominal binder to assure the material fits the body contours and
maintains position until hardened (approximately 20 minutes). Optional washable liner/cover adds attractive appearance and provides a soft interface between brace and skin. Four heights accommodate patient
anatomy. Instructions included. From Allard USA.
Size Guide
Size
Minimum
Maximum
Max. Height Max. Height
Circumf.
Circumf.
Front
Back
LSO
XS/S 23.5”29.5”7.75”11.75”
S/M
27.5”
35.5”
7.75”
12.5”
M/L
33.5”
41.25”
8.5”
13.75”
L/XL
37.5”
47.25”
9.5”
13.75”
XL/XXL
45.5”
55”
10.5”
14.25”
LSO Plus (Taller)
XS/S
23.5” 29.5” 11.75” 11.75”
S/M
27.5”
35.5”
12.5”
12.5”
M/L
33.5”
41.25”
13.75”
13.75”
L/XL
37.5”
47.25”
13.75”
13.75”
XL/XXL
45.5”
55”
14.25”
14.25”
TLSO
S/M 27.5” 35.5”16.5” 16.5”
M/L
33.5”
41.25”
18.75”
18.75”
XL/XXL
41.25”
55”
21.25”
21.25”
TLSO Plus (Taller)
S/M
27.5”
35.5”
18.5”
18.5”
M/L
33.5”
43.25”
21.5”
21.5”
XL/XXL
41.25”
55”
23.5”
23.5”
Selection Guide
LSO
XS/S S/M M/L L/XLXL/XXL
Cut-4-Custom, Front
649190011 649190012 649190013649190014 649190015
Cut-4-Custom, Back
649210011 649210012 649210013649210014 649210015
Liner/Cover, Front
649290011
649290012
649290013
649290014
649290015
Liner/Cover, Back
649310011
649310012
649310013
649310014
649310015
LSO Plus
Cut-4-Custom, Front
XS/S S/M M/L L/XLXL/XXL
649200011 649200012 649200013649200014 649200015
Cut-4-Custom, Back (pictured) 649210011 649210012 649210013649210014 649210015
Liner/Cover, Front
649300011
649300012
649300013
649300014
649300015
Liner/Cover, Back
649310011
649310012
649310013
649310014
649310015
TLSO
S/M
M/L
XL/XXL
Cut-4-Custom, Front
649220010649220012 649220014
Cut-4-Custom, Back
649230010649230012 649230014
Liner/Cover, Front
649320010
649320012
649320014
Liner/Cover, Back
649330010
649330012
649330014
TLSO Plus
S/M
M/L
XL/XXL
Cut-4-Custom, Front
649240010649240012 649240014
Cut-4-Custom, Back
649250010649250012 649250014
Liner/Cover, Front
649340010
649340012
649340014
Liner/Cover, Back
649350010
649350012
649350014
649360000Edging for Cut-4-Custom, 5mm
649370000
Edging for Cut-4-Custom, 7mm
13 0 Sheet Goods
F a b r ic a t io n
LEATHER and VINYL
Orthopedic Leather
a.
FABRICATION
Offered in a variety of colors and finishes*, weights and textures, orthopedic leather hides are measured in
ounce weights. Most average 18-22 square feet. Leather item numbers begin “LEATHER-(code)”. Example:
LEATHER-146. Refer to footnotes when multiple options are available.
Smoked Elk1
Honey Sable (146)
Green Elk 2
Cream Cow3
Clay Cow (200)
Bone Softy Pebble (165)
Taupe Softy Pebble (169)
Bone Luxor (164)
1
Smoked Elk
Sand Deer (308)
Perf’d Cream Cow (802P)
English Kips (12)Molding4
Light (181)
Medium (182)
Heavy (183)
2
Green Elk
Medium (1822)
Heavy (1833)
3
Cream Cow
Extra-Light (801)
Light (802)
Medium (803)
Cream Cabretta (307)
Tobacco Suede (1015)Russet5
Caramel Deer Cow (125)
Heavy (804)
4
Molding
5/6 oz (154)
8/9 oz (157)
5
Russet
4/5 oz (703)
5/6 oz (704)
8/9 oz (707)
Maroon Cow (299)
Black Cherry Vaquero (135)
Rust Vaquero (134)
Blue Cow (300)
FABRIC ATION
Sheet Goods
131
Orthopedic Leather, continued
FABRICATION
Navy Softy Pebble (166)
Black Elk6
Black Saddle Side (128)
Black Luxor (161)
Black Deer Cow (123)
Black Paloma (1022)
Black Deer Skin (402)
Black Cow7
Black Sheep (1021)
Brown Lamb (1023)
Brown Luxor (162)
Brown Deer (311)
6
Black Elk
Light (101)
Medium (102)
Brown Cow (197)
Brown Pebble (205)
Brown Deer Cow (124)
Brown Elk8
Heavy (103)
7
Black Cow
Light (297)
Medium (198)
8
Brown Elk
Light (201)
Medium (202)
Heavy (203)
Tan Softy Pebble (170)
Brown Saddle Side (127)
Dk Brown Cabretta (305)
Tan Footbed (1017)
13 2 Sheet Goods
F a b r ic a t io n
LEATHER and VINYL
Orthopedic Leather, continued
FABRICATION
a.
Tan Pig Suede (41)
Tan Lining (130)
Royo Pull Up Cow (138)
Beige Cabretta (306)
Pearl Elk (172)
Pearl Apron Splits (1013)
Pearl Cow 9
Perf’d Pearl Cow (902P)
White Softy Pebble (167)
White Elk10
White Cow (195)
White Athletic (191A)
9
Pearl Cow
Extra Light (901)
Light (902)
Medium (903)
10
White Elk
Light (191)
Medium (192)
Heavy (193)
b.
White Lamb (1019)
Ivory Sable (147)
*Actual appearance may vary.
Coronet MITIKA ASL
A luxurious suede-like microfiber fabric. It has a very high abrasion and tear strength resistance. Sheet size
30.25” x 59”. Black. From Acor.
Item No. ðSDUR-00270
FABRIC ATION
c.
Sheet Goods
133
Acor Vinyl
A popular top cover material that blends in with the shoe and is smooth on the foot. Sheet size 36” x 27”.
FABRICATION
Description
Black
Navy
White
Item No. ð
SDUR-00083SDUR-00084 SDUR-00085
13 4 Padding Materials
F a b r ic a t io n
PADDING MATERIALS
a.
Orthowick® Material
FABRICATION
A comfortable moisture wicking padding material. Velcro® hook compatible. 54” width. Sold yard.
Thickness
1/4”
3/8”
1/2”
Sky Blue
N/A
N/A
LM-OW12-SKYBLU
Navy Blue
LM-OW14-BLU
N/A
N/A
Blueberry
N/A
N/A
LM-OW12-BLUBRY
Gunmetal
N/A
Charcoal
Royal Blue
LM-OW38-GBN/A
N/A
DISCONN/A
LM-OW14-RY/BLULM-OW38-RY/BLUN/A
b.
QuickStick™
Adhesive-backed padding material. Smooth, soft and supple. Closed-cell foam won’t absorb perspiration,
bacteria or odors. 3/16” thickness. Off white. 25’ roll. Sold each. From AliMed.
Width
5-3/4”
18”
Item No. ð
41774178
c.
SiFoam™
Adhesive-backed, reticulated open-cell foam sheet molds and adheres to contours and curves. Compresses
under tension to avoid excessive pressure. Allows drainage away from open wounds. Ideal for padding bony
prominences. Use as cast, orthosis or prosthesis padding or with critical diabetic patients. Sheet size 8” x 9”.
Sold box.
Thickness
3/8”
1/2”
Sheets per Box
10
8
Item No. ð
83SIA-3/883SIA-1/2
d.
Adhesive Moleskin
Adhesive backed. White or flesh color. 12” width. 5 yard roll. Sold each.
Color
White
Flesh
Item No. ð
5836958364
FABRIC ATION
Padding Materials
135
FELT and SHEEPSKIN
e.
White Padding Felt
FABRICATION
Thickness
1/8”
1/4”
Item No. ð
WPF-125WPF-250
f.
White Orthopedic Felt Padding
Thickness
1/8”
1/4”
Item No. ð
1WFELT1WFELTW
g.
Dacron Felt
Two weights. Sold per yard or 25 yard roll.
Weight
1/2 Ounce
1 Ounce
Single Yard
DF-050-01DF-100-01
25 Yard Roll
DF-050-25DF-100-25
h.
Lamb’s Wool
3/8 oz or 4 oz package. Sold each.
Description
3/8 oz
4.0 oz
Item No. ð
LW-038OZLW-4OZ
i.
Sheepskin
Sheepskin shear pile. 3/4”. From WBC Industries.
Item No. ð29
13 6 Padding Materials
F a b r ic a t io n
GEL SHEETS
a.
Self Adhesive Silicone
FABRICATION
Just peel and place! Adhesive-backed 0.51mm silicone conforms to irregular shapes. Ideal for trimline edges
or anywhere a smooth edge and light padding is desired. Clear. Available in roll or sheet. From ESP.
Description
1” x 54”
12” x 12”
Roll
Sheet
Item No. ð
ESP-AS1ESP-AS2
b.
Soft Shear Gel Sheeting™
3mm of Silipos polymer gel in a sheet available either lined one side or both sides with fabric. Excellent
pressure and shear relieving properties. Fabric cover increases durability of gel and allows sheet to be glued.
Sold sheet. From Silipos.
Sheet Size
8” x 8”
12” x 16”
16” x 20”
Fabric 1 Side
15605-SI15705 15805-SI
Fabric 2 Sides
1561515715 15815
c.
WonderFlex™
Absorbs shock and shear force using medical grade silicone gel. Resists compression. Available with or without
fabric lining. Sheet size 12” x 16”. Sold sheet. From Silipos.
Thickness
2mm
3mm
5mm
Unlined
4722-SI4723N/A
Lined
N/A
47334735
d.
Pressure Relief Padding™
Adhesive-backed 2mm thick gel padding with a 2-way stretch top cover. 36” roll. From Silipos.
Width
4”
8”
Item No. ð
11205-SI11215
FABRIC ATION
Supplies
137
DISPENSERS and APPLICATORS
e.
Plastic Glue Jar
Description
Item No.ò
FABRICATION
Storage jar for all cements. Adjustable brush screws into cap. Sold each.
GP-PL
Glue Jar with Brush
SJBRReplacement Glue Brush
f.
Glue Pot
Suitable for all adhesives, lacquers and other brushable liquids. The tight fitting snap-on cap stops solvent
loss to prevent evaporation and helps maintain viscosity. Specially formulated plastic guards against build-up.
Features built-in brush wiping bar. Includes brush.
Capacity
0.45 Liter
1.5 Liter
Glue Pot
GP45GP15
GP45BReplacement Brush for GP45
GP15B
Replacement Brush for GP15
g.
Teflon Cement Keeper
Teflon coating keeps glue from sticking. When dry, glue easily peels off. Stem and brush unit seal without a
screw-on cap. Holds 1/5 gallon. Sold each.
Description
Item No.ò
Teflon Cement Keeper
42515000
42515000-RBReplacement Brush Tip
h.
Liquid Squeeze Bottle
One squeeze delivers a uniform amount of liquid. Flexible spout bends to reach tight areas. One pint capacity
polyethylene bottle. Stainless steel ball check valve in spout prevents spillage and flame flashback. Sold each.
Item No. ð
2BF-25272
13 8 Supplies
F a b r ic a t io n
DISPENSERS and APPLICATORS — Continued
a.
Disposable Syringe and Needle
FABRICATION
Sold separately.
Description
Item No.ò
Syringe, 20ml
DS-20
#2 Needle, 16 Gauge
N-16
GLOVES and APRONS
b.
High Temperature Gloves
Heavyweight terrycloth resists temperatures up to 250°F. The loop-out design provides excellent heat and
cut protection. 11” in length. Sold pair.
Item No. ð
HTG-100
c.
ThermoGloves
Sold pair. From Aetrex.
Item No. ð
9152
d.
Hot Mill Gloves
Rated to 450° F with an extra-long cuff for added safety. Sold pair.
Item No. ð
700-025L
FABRIC ATION
e.
Supplies
139
Disposable Gloves
FABRICATION
Latex, Vinyl and Nitrile exam gloves providing the utmost in tactile sensitivity. Powder-free, powdered for
donning ease with medical grade absorbable dusting powder, or Aloetouch® with the moisturizing benefit
of aloe. 100 per box.
Latex
Size
Small
Medium
Large
X-Large
Powder-Free
DLG-110-S DLG-110-MDLG-110-L DLG-110-XL
Powdered
DLG-100-S DLG-100-MDLG-100-L DLG-100-XL
Aloetouch® DLG-120-S DLG-120-MDLG-120-L DLG-120-XL
Vinyl
Size
Small
Medium
Large
X-Large
Powder-Free
DVG-110-S DVG-110-MDVG-110-L DVG-110-XL
Powdered
DVG-100-S DVG-100-MDVG-100-L DVG-100-XL
Aloetouch®DVG-120-S DVG-120-MDVG-120-L DVG-120-XL
Nitrile
Size
Powder-Free
Small
Medium
Large
X-Large
DG-300N-S DG-300N-MDG-300N-L DG-300N-XL
Aloetouch®DG-320N-S DG-320N-MDG-320N-L DG-320N-XL
f.
Powder-Free Latex Gloves
Latex gloves offer an excellent biological barrier. They are not intended for use as a chemical barrier. These
powder free latex gloves are made from natural rubber which may cause allergic reactions in some users.
100 per box.
Size
Small
Medium
Large
Item No. ð
410-HTPFS410-HTPFM 410-HTPFL
g.
Black Nitrile Gloves
Black nitrile. Powder-free. Textured surface. Ultra durable. 100 per box.
Size
Small
Medium
Large
X-Large
Item No. ð
DG-320BN-S DG-320BN-MDG-320BN-L DG-320BN-XL
h.
Disposable Synthetic Gloves
Accutouch powder-free, latex-free synthetic Exam Gloves. 100 per box.
Size
Small
Medium
Large
X-Large
Item No. ðMDS192074 MDS192075MDS192076 MDS192077
14 0
Supplies
F a b r ic a t io n
GLOVES and APRONS — Continued
a.
Lab Apron
FABRICATION
Bib pocket apron. Sold each.
Description
Item No.ò
Item No. ð
6BB-3821
SAFETY EQUIPMENT
b.
Safety Eye Goggles
Protects eyes from impact and splash. Over-sized, .060 lens thickness. Specially treated lens reduces fogging
under most damp and humid conditions. Chemical resistant rubber headband. Sold each.
Item No. ð
SEG-100
c.
Face Shield
Precision ratchet head size adjustment for a comfortable, snug fit. Floating window suspension distributes
weight and reduces shock of impact. Five position pin-lock crown band provides additional adjustment for
proper support and firm fit. Sold each.
Item No. ð
FS-100
FS-100-RS
Replacement Shield
d.
Safety Dust Mask
25 masks per package.
Item No. ð
541203
e.
Disposable Dust Mask
This mask offers a lightweight design that incorporates an elastic headband and an adjustable nose clip.
The contoured ribbing helps to resist structural collapsing that can be brought on by increased humidity. 50
masks per package.
Item No. ð
DDM-50
FABRIC ATION
f.
Supplies
141
First Aid Kit
Item No. ð
FAK-100
FABRICATION
This 106-piece first aid kit is ideal for contractors, fleet vehicles, work sites or small companies with up to
25 employees. It meets federal OSHA recommendations and carries 17 critical products including a 4 oz. eye
wash. The partitioned, water-resistant plastic case is wall mountable yet has a handle for easy carrying. Kit
dimensions: 9” x 8-3/8” x 2-1/2”. Sold each.
ADHESIVE TAPE
g.
3M™ Vinyl Electrical Tape
3M™ Temflex™ 1700. 7.0 mil. Black. 3/4” width. 60 ft roll. Sold each.
Item No. ð
3M-1700
h.
Masking Tape
3” core. 60 yard roll. Sold each.
Description
1”
2”
Performance
(Green)
Item No. ð
3M-MT1 3M-MT23M-26340
i.
Scotch® ATG Adhesive Transfer Tape 924
2.0 mil, 400 acrylic adhesive on a densified kraft paper liner. 2.0 mil. 3/4” width. 36 yard roll. Sold each.
Item No. ð
3M-924
142
Supplies
F a b r ic a t io n
ADHESIVE TAPE — Continued
a.
3M™ Adhesive Transfer Tape 465
FABRICATION
2.0 mil high tack acrylic adhesive 400 with 4.0 mil 60lb densified kraft paper liner. 1” width. Clear. 60 yard
roll. Sold each.
Item No. ð
3M-465
b.
3M™ General Purpose Vinyl Tape
5.0 mil vinyl backing with a rubber adhesive. Good conformability and instant adhesion. 1” width. 3” core.
Color
Clear
White
Yellow
Item No. ð
3M-764-CLEAR 3M-764-WHITE3M-764-YELLOW
c.
Tartan™ Filament Tape 8934
Transparent polypropylene film backing reinforced with glass yarn filaments. Light-duty tensile strength,
nick- and abrasion-resistant. 1” width. 3” core. 60 yard roll. Sold each.
Item No. ð
3M-8934
d.
Clear Stretch Tape
3/4” width. Sold roll.
Description
60 Feet
36 Yards
Item No. ð
199430199434
Supplies
143
FABRIC ATION
e.
Pressure Sensitive Tape
1” width. 36 yard roll. Clear. Sold each.
FABRICATION
Item No. ð
471-1
GENERAL SUPPLIES
f.
Indelible Pencils
Purple indelible lead.
Quantity
Dozen
144/Gross
Item No. ð
IP-DOZIP-GROSS
g.
Tracing Paper
No lines. Sold sheet.
Item No. ð
154001
h.
Kraft Paper
24” width. 40 lb roll.
Item No. ðGOR244
i.
Exam Table Paper
21” width. 6.25 yard roll. Sold roll.
Item No. ð08393AK
14 4
Supplies
F a b r ic a t io n
GENERAL SUPPLIES — Continued
a.
Tongue Depressors
FABRICATION
Natural wood. 500 per box.
Item No. ð
TD-100
b.
Beeswax
1 lb tub.
Item No. ð
BW-1LB
c.
Paper Mixing Cups
Waxed or unwaxed. Sold package or case.
Description
8 oz
8 oz
16 oz
16 oz
32 oz
32 oz
WaxedUnwaxedWaxedUnwaxedWaxed Unwaxed
Per Package
5050505040 25
Per Case N/A1,000N/A1,000N/A 100
PMC-07-W PMC-07-UW PMC-16-W PMC-16-UWPMC-32-W PMC-32-UW
Package
Case
N/A
PMC-07-UWC
N/APMC-16-UWCN/APMC-32-UWB
d.
Bench Brush
Sold each.
Item No. ð
BB-100
e.
Varnish Brush
Sold box.
Qty/Box
Item No.ò
Natural bristle with wood handle
3 dozen
VB-100
Polyester bristle with plastic handle
1 dozen
VB-150
Description
Supplies
145
FABRIC ATION
f.
Acid Swab Brush
One dozen per package.
FABRICATION
Item No. ð
AB-100
g.
Laminating String
16 ply. 2 lb roll. Sold each.
Item No. ð
LS-2LB
h.
Nylon Parachute Cord
1/8”. 100 yards. White. Sold roll.
Item No. ð
NPC-100
i.
Nylon Thread
1 lb spool (6,000 yards). Sold each.
Color
Soft (69)
Regular (92)
Heavy (138)
White
Beige
Black
Brown
BT69W BT69B BT69LBT69BRO
BT92WBT92BBT92L
BT138WBT138BBT138L
N/A
N/A
j.
Nylon Thread
1 lb spool.
Description
White
White
Black
X-Heavy
Regular
Regular
Item No. ð
NT-1LB-HWHNT-1LB-RWH NT-1LB-RBK
14 6
Supplies
F a b r ic a t io n
GENERAL SUPPLIES — Continued
a.
PVA Film
FABRICATION
Sold roll.
Thickness
.003
.004
25 Yards
PVAF-003-25PVAF-004-25
50 Yards
PVAF-003-50N/A
b.
PVA Bags
40” length. Sizes 4 through 16 sold 20 per package. Size 20 sold 10 per package.
Width
Item No. ð
4”
6”
8”
10”
12”
14”
16”
20”
PVAB-04PVAB-06PVAB-08PVAB-10PVAB-12PVAB-14PVAB-16PVAB-20
c.
Master Craft™ PVA Bags
Strong narrow seam helps ensure top quality cosmetic results. Ultraviolet light-protected packaging. 20 per
package. From Comfort Products.
Width
4”
6”
8”
10”
12”
14”
16”
20”
N/A
N/A
N/A
20” Length
PV4X20 PV6X20 PV8X20 PV10X20PV12X20
40” Length
PV4X40 PV6X40 PV8X40 PV10X40PV12X40PV14X40PV16X40PV20X40
d.
Trulife PVA Bags
High quality polyvinyl alcohol bags. Tapered design. 40” (101.6cm) length. 20 per package. From Trulife.
Size
4”
(10.2cm)
6”
(15.2cm)
8”
(20.3cm)
10”
(25.4cm)
12”
(30.5cm)
14”
(35.6cm)
Item No. ð
DISCONDISCONDISCONDISCONDISCON DISCON
e.
SPT Technology PVA Bags
3 mil thickness. 40” length. 20 per package. From SPT Technology.
Width
Item No. ð
4”
6”
8”
10”
12”
14”
16”
SPT-PVA-4 SPT-PVA-6SPT-PVA-08SPT-PVA-10SPT-PVA-12SPT-PVA-14SPT-PVA-16
Supplies
147
FABRIC ATION
f.
SPT Technology Closed End PVA Bags
The Closed End PVA Bag is a tapered PVA sleeve that has been seamed distally. 3 mil Polyvinyl film. 5 sleeves
per package. From SPT Technology.
FABRICATION
Code Guide
Distal Dia. (mm)
Avail. Sizes
44.45
4”
50.8
4”
63.5
4’
76
89
102
114
127
140
158
6” 6-14”6-16”6-16”6-16”10-16”
10-16”
Size Code (*)
000
0001234567
Sleeve Size
Item No. ð
Sleeve Size
Item No. ð
4” (100mm)
6” (150mm)
8” (200mm)
10” (250mm)
SPT-PVA-CE4-(*) SPT-PVA-CE6-(*) SPT-PVA-CE8-(*)SPT-PVA-CE10-(*)
12” (300mm)
14” (360mm)
16” (450mm)
SPT-PVA-CE12-(*)SPT-PVA-CE14-(*)SPT-PVA-CE16-(*)
h.
Plastaband
2mm x 20mm. 10 meter roll. Sold each. From Ottobock.
Item No. ð
636K8=20X2X10
h.
Surgical Tubing
Sold per foot.
Inside Diameter
3/16”
1/4”
1/4”
1/2”
Wall Thickness
3/32”
1/16”
1/8”
1/8”
Item No. ðST-316332 ST-416116ST-416216 ST-816216
i.
Leg Bag
Plastic. 25 per package.
Item No. ð
LBG-1-25
j.
Leg Box
Corrugated. Brown both inside and outside. Dimensions: 12” x 12” x 40”. Furnished flat. Sold each.
Item No. ð
LBX-42
...that make it all come together!
15 0

Fabrication Section

Transcription

Similar documents

shoe repair products - Frankford Leather Co., Inc.