Command Manual (Volume IV)

Transcription

ZXA10 C220
GPON Optical Access Convergence
Equipment
Command Manual (Volume IV)
Version 1.1.2
ZTE CORPORATION
ZTE Plaza, Keji Road South,
Hi-Tech Industrial Park,
Nanshan District, Shenzhen,
P. R. China
518057
Tel: (86) 755 26771900
Fax: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: [email protected]
LEGAL INFORMATION
Copyright © 2006 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of
this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION
or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject
matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,
the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
1.0
19/06/2009
First Edition
Serial Number: sjzl20093772
Contents
Preface............................................................... i
MSTP .................................................................1
instance ........................................................................ 1
name ............................................................................ 2
revision......................................................................... 3
show spanning-tree inconsistentports................................ 3
show spanning-tree instance ............................................ 4
show spanning-tree interface ........................................... 4
show spanning-tree mst configuration ............................... 5
show spanning-tree statistics ........................................... 5
show spanning-tree transparent ....................................... 6
spanning-tree ................................................................ 7
spanning-tree bpduguard ................................................ 7
spanning-tree digestauto ................................................. 8
spanning-tree edged-port ................................................ 8
spanning-tree forward-delay ............................................ 9
spanning-tree guard ......................................................10
spanning-tree hello-time ................................................10
spanning-tree linktype ...................................................11
spanning-tree max-age ..................................................11
spanning-tree mcheck....................................................12
spanning-tree mode.......................................................12
spanning-tree mst configuration ......................................13
spanning-tree mst hmd5-digest.......................................14
spanning-tree mst hmd5-key ..........................................14
spanning-tree mst instance priority (Global)......................15
spanning-tree mst instance priority(interface) ...................16
spanning-tree mst instance path-cost...............................16
spanning-tree mst max-hops ..........................................17
spanning-tree transparent ..............................................18
spanning-tree packet-type ..............................................18
LACP................................................................ 21
clear lacp .....................................................................21
interface ......................................................................21
lacp port-priority ...........................................................22
lacp system-priority .......................................................23
lacp timeout .................................................................23
show lacp .....................................................................24
smartgroup...................................................................24
smartgroup load-balance ................................................25
PIM Snooping .................................................. 27
ip pim snooping.............................................................27
pim snooping ................................................................27
show ip pim snooping all-statistic ....................................28
show ip pim snooping all-statistic clear .............................28
show ip pim snooping entry ............................................29
show ip pim snooping neighbor-info .................................29
show ip pim snooping port-info........................................30
show ip pim snooping port-statistic clear interface .............30
show ip pim snooping port-statistic interface .....................31
DHCP ............................................................... 33
DHCP Snooping Configuration .........................................33
ip dhcp snooping enable .............................................33
ip dhcp snooping .......................................................33
ip dhcp snooping quota ..............................................34
ip dhcp snooping trust................................................34
ip dhcp snooping vlan ................................................35
show ip dhcp snooping configure .................................35
show ip dhcp snooping port ........................................36
show ip dhcp snooping trust........................................36
show ip dhcp snooping vlan ........................................37
show ip dhcp snooping port quota................................37
DHCP L3 Publish Configuration ........................................38
ip dhcp enable ..........................................................38
ip dhcp logging on .....................................................38
ip dhcp user quota.....................................................39
ip dhcp mode ............................................................39
show ip dhcp configure...............................................40
DHCP Relay and DHCP Proxy Configuration .......................41
ip dhcp database .......................................................41
ip dhcp relay server retry ...........................................41
ip dhcp relay update arp.............................................42
ip dhcp proxy client leasetime .....................................42
ip dhcp relay server vclass-id ......................................43
ip dhcp helper-address ...............................................43
ip dhcp relay agent ....................................................44
ip dhcp relay server ...................................................44
show ip dhcp relay server vclass-id ..............................45
show ip dhcp relay user..............................................45
show ip dhcp proxy client ...........................................46
DHCP Server Configuration .............................................46
ip local pool ..............................................................46
ip local pool conflict-ip................................................47
ip dhcp server dns .....................................................47
ip dhcp server leasetime.............................................48
ip dhcp server update arp ...........................................48
ip dhcp server gateway ..............................................49
peer dafault ip pool....................................................49
show ip dhcp server user ............................................50
GPON............................................................... 51
GPON Global Commands ................................................51
gpon........................................................................51
abort onu-version ......................................................51
activate onu-version ..................................................52
bandwidth-profile ......................................................52
commit onu-version ...................................................53
innerport ..................................................................54
onu-ver....................................................................54
onu-batch-cfg ...........................................................55
performance-threshold bridge-port ..............................56
performance-threshold ces .........................................57
performance-threshold dot1x ......................................58
performance-threshold eth .........................................58
performance-threshold gem ........................................60
performance-threshold radius......................................61
pw-profile.................................................................61
rate-limit igmp ..........................................................64
traffic-profile.............................................................64
treat .......................................................................65
update onu-version....................................................67
virtual-onu ...............................................................68
threshold-profile........................................................69
scb-port-mode ..........................................................69
voip-media-profile .....................................................70
dial-plan-table...........................................................72
dial-plan...................................................................73
filter-rule..................................................................74
flood-broadcast .........................................................75
schedule-mode..........................................................76
show gpon-scb-port-mode ..........................................76
show gpon dial-plan...................................................77
show gpon dial-plan-table...........................................77
show gpon filter-rule ..................................................78
show gpon flood-broadcast .........................................78
show gpon performance-threshold bridge-port...............79
show gpon performance-threshold ces..........................79
show gpon performance-threshold dot1x ......................80
show gpon performance-threshold eth..........................80
show gpon performance-threshold gem ........................81
show gpon performance-threshold radius......................81
show gpon profile bandwidth.......................................82
show gpon profile traffic .............................................82
show gpon pw-profile .................................................83
show gpon rate-limit igmp ..........................................83
show gpon treat ........................................................84
show gpon virtual-onu................................................84
show gpon voip-media-profile .....................................85
show gpon profile ......................................................85
show onu-ver............................................................86
show dial-plan-table ..................................................87
show dial-plan...........................................................87
GPON OLT Commands ....................................................88
interface gpon-olt ......................................................88
authtype ..................................................................88
ber ..........................................................................89
broadcast bandwidth..................................................89
description ...............................................................90
discover-period .........................................................90
dotlp-to-queue-map...................................................91
fec...........................................................................91
flood bandwidth ........................................................92
ip access-group .........................................................92
linktrap ....................................................................93
lock .........................................................................93
multicast bandwidth...................................................94
pon-bandwidth ..........................................................94
name ......................................................................95
onu-def-reg ..............................................................95
range.......................................................................96
range-mode..............................................................96
register ....................................................................97
reset........................................................................98
weight-mgmt ............................................................98
shutdown .................................................................98
show fec ..................................................................99
show gpon olt allocid..................................................99
show gpon olt flood bandwidth .................................. 100
show gpon olt multicast bandwidth ............................ 100
show gpon olt config ................................................ 101
show gpon olt broadcast-bandwidth ........................... 101
show gpon olt schedule-mode ................................... 102
show gpon olt dot1p-to-queue-map ........................... 102
show gpon olt weight-mgmt...................................... 103
show gpon olt pon-bandwidth.................................... 103
show gpon olt portid ................................................ 104
show gpon olt range-mode ....................................... 104
GPON ONU Basic Management Commands ...................... 105
interface gpon-onu .................................................. 105
interface ................................................................ 106
action .................................................................... 106
description ............................................................. 107
dhcp-option82 trust ................................................. 107
gemport ................................................................. 108
gemport-weight-mgmt ............................................. 109
max-mac-learn ....................................................... 110
gemport priority-regeneration ................................... 111
gemport priority-regeneration mode........................... 111
name .................................................................... 112
onu-state ............................................................... 112
portid-encrypt ......................................................... 113
port-location format................................................. 113
pppoe-plus ............................................................. 114
pwmode ................................................................. 115
qos-mgmt .............................................................. 115
range .................................................................... 116
sn ......................................................................... 117
tcont...................................................................... 117
type-name.............................................................. 118
shutdown .............................................................. 118
vlan-xconnect ......................................................... 119
show allocid ............................................................ 119
show gpon onu gemport ........................................... 120
show gpon onu gemport priority-regeneration
configuration................................................... 120
show gpon onu baseinfo ........................................... 121
show gpon onu detail-info......................................... 122
show gpon onu gemport statistic ............................... 122
show gpon onu state................................................ 123
show gpon onu uncfg ............................................... 123
show gpon onu weightmgmt ..................................... 124
show performance onu ............................................. 125
show gpon onu tcont................................................ 125
show gpon onu update-status ................................... 126
show gpon onu version-running................................. 126
show portid ............................................................ 127
GPON ONU Remote Management Commands................... 127
pon-onu-mng.......................................................... 127
pon-onu-mng ......................................................... 128
action ................................................................... 128
bridge .................................................................... 129
bridge-port uni-bind................................................. 130
bridge-port host-bind ............................................... 131
bridge-port uni ........................................................ 131
bridge-port ip-host .................................................. 132
bridge-port uni traffic-limit........................................ 132
bridge-port uplink.................................................... 133
device admin-state .................................................. 134
device battery-backup.............................................. 134
device sec-mode ..................................................... 135
dot1x..................................................................... 135
dot1x ethuni ........................................................... 136
ex-vlan bridge-port uni............................................. 137
ex-vlan bridge-port uplink ........................................ 138
ex-vlan eth ............................................................. 139
ex-vlan-table bridge-port uni .................................... 139
ex-vlan-table bridge-port uplink ................................ 140
ex-vlan-table eth..................................................... 141
interface ces admin-state ......................................... 142
interface ces arc ...................................................... 142
interface ces ds1-framing ......................................... 143
interface ces ds1-mode ............................................ 143
interface ces expect-type.......................................... 145
interface ces line-coding ........................................... 145
interface ces line-length ........................................... 146
interface ces line-type .............................................. 146
interface ces loopback .............................................. 147
interface eth admin-state ......................................... 147
interface eth arc ...................................................... 148
interface eth bridgeorip ............................................ 148
interface eth dotlp-mapper ....................................... 149
interface eth eth-loop............................................... 150
interface eth expect-type.......................................... 150
interface eth max-frame ........................................... 151
interface eth pause-time........................................... 151
interface eth power-control ....................................... 152
interface eth pppoe-filter .......................................... 152
interface eth speed .................................................. 153
interface eth wiring.................................................. 154
interface pon alarm.................................................. 154
interface pon current-threshold ................................. 155
interface pon rx-optical-threshold .............................. 155
interface pon sf-threshold ......................................... 156
interface pon tx-optical-threshold .............................. 157
interface pon vol-threshold ....................................... 157
interface pon sf-threshold ......................................... 158
interface pon gem-blocklen ....................................... 159
interface pots admin-state ........................................ 159
interface pots arc .................................................... 160
interface pots impedance.......................................... 160
interface pots rx-gain............................................... 161
interface pots tx-gain ............................................... 161
interface pots tx-path............................................... 162
interface uplink dot1p-mapper................................... 162
interface video admin-state ...................................... 163
interface video arc ................................................... 164
interface video power-control .................................... 164
interface gemport bridge .......................................... 165
interface gemport dot1p ........................................... 165
interface gemport dot1p-bridge ................................. 166
interface gemport uni............................................... 167
mac-filter ip-host..................................................... 167
mac-filter uni .......................................................... 168
mac-filter uplink ...................................................... 168
mc-interwork .......................................................... 169
performance dot1x ethuni......................................... 169
performance eth...................................................... 170
performance gal-eth ................................................ 171
performance gem .................................................... 171
performance mac-bridge .......................................... 172
performance bridge-port uni ..................................... 172
performance bridge-port uplink ................................. 173
performance mgc .................................................... 174
performance ces...................................................... 174
performance radius.................................................. 175
performance bridge-port ip-host ................................ 175
performance call-ctrl ................................................ 176
performance rtp ...................................................... 176
performance sip-call-init ........................................... 177
power-shedding ...................................................... 177
pre-filter ip-host ...................................................... 178
pre-filter uni ........................................................... 179
pre-filter uplink ....................................................... 180
pw delete ............................................................... 181
pw ethernet ............................................................ 181
pw ip ..................................................................... 182
pw optional............................................................. 183
pw rtp.................................................................... 184
pw tdm .................................................................. 185
up-queue-map ........................................................ 186
vlan-filter ............................................................... 187
vlan-filter uni .......................................................... 187
vlan-filter uplink ...................................................... 188
vlan-filter-mode ...................................................... 188
vlan-filter-mode uni ................................................. 189
vlan-filter-mode uplink ............................................. 190
vlan-tag ................................................................. 191
vlan-tag uni ............................................................ 192
show gpon remote-onu bridge ................................... 193
show gpon remote-onu bridge-port ............................ 194
show gpon remote-onu bridge-port uplink................... 194
show gpon remote-onu device................................... 195
show gpon remote-onu distance ................................ 195
show gpon remote-onu dot1x.................................... 196
show gpon remote-onu dot1x ethuni .......................... 196
show gpon remote-onu ex-vlan bridge-port uni ........... 197
show gpon remote-onu ex-vlan bridge-port
uplink ............................................................ 198
show gpon remote-onu ex-vlan eth............................ 198
show gpon remote-onu ex-vlan-table bridge-port
uni ................................................................ 199
show gpon remote-onu ex-vlan-table bridge-port
uplink ............................................................ 199
show gpon remote-onu ex-vlan-table eth.................... 200
show gpon remote-onu interface ces .......................... 201
show gpon remote-onu interface dot1p-mapper
eth ................................................................ 201
show gpon remote-onu interface dot1p-mapper
uplink ............................................................ 202
show gpon remote-onu interface eth .......................... 202
show gpon remote-onu interface pon ......................... 203
show gpon remote-onu mac-filter .............................. 204
show gpon remote-onu interface video ....................... 205
show gpon remote-onu interwork .............................. 205
show gpon remote-onu performance bridge-port
ip-host ........................................................... 206
uni ................................................................ 206
uplink ............................................................ 207
show gpon remote-onu performance ces..................... 208
show gpon remote-onu performance eth..................... 208
show gpon remote-onu performance gem ................... 210
show gpon remote-onu performance mac-bridge ......... 210
show gpon remote-onu performance ip-host ............... 211
show gpon remote-onu performance call-ctrl ............... 212
show gpon remote-onu performance rtp ..................... 212
show gpon remote-onu performance sip-call-init.......... 213
show gpon remote-onu power-shedding ..................... 214
show gpon remote-onu pre-filter uni .......................... 214
show gpon remote-onu pre-filter uplink ...................... 215
show gpon remote-onu pw........................................ 216
show gpon remote-onu up-queue-map ....................... 217
show gpon remote-onu vlan-filter uni ......................... 217
show gpon remote-onu vlan-filter uplink ..................... 218
show gpon remote-onu vlan-filter-mode uni ................ 219
show gpon remote-onu vlan-filter-mode uplink ............ 219
show gpon remote-onu vlan-tag uni ........................... 220
show onu running config........................................... 220
VoIP Management Commands ....................................... 221
bridge-port host-bind ............................................... 221
bridge-port ip-host .................................................. 221
interface pots admin-state ........................................ 222
interface pots arc .................................................... 223
interface pots impedance.......................................... 223
interface pots rx-gain............................................... 224
interface pots tx-gain ............................................... 224
interface pots tx-path............................................... 225
ip-host dhcp-enable ................................................. 225
ip-host id ............................................................... 226
ip-host ip ............................................................... 226
ip-host primary-dns ................................................. 227
mac-filter ip-host..................................................... 228
performance bridge-port ip-host ................................ 228
performance call-ctrl ................................................ 229
performance ip-host ................................................ 229
performance rtp ...................................................... 230
performance sip-call-init ........................................... 230
pre-filter ip-host ...................................................... 231
sip-agent proxy-server ............................................. 231
sip-agent reg-exptime.............................................. 232
sip-agent registrar-server ......................................... 232
sip-agent rereg-starttime ......................................... 233
sip-agent ss............................................................ 233
sip-agent validate .................................................... 234
sip-user ................................................................. 235
vlan-filter ip-host..................................................... 237
vlan-filter-mode ip-host............................................ 237
vlan-tag ip-host ...................................................... 238
voip-ctp ................................................................. 239
show gpon remote-onu bridge-port host-bind .............. 240
show gpon remote-onu bridge-port ip-host ................. 241
show gpon remote-onu interface pots......................... 241
show gpon remote-onu ip-host .................................. 242
ip-host ........................................................... 243
show gpon remote-onu pre-filter ip-host..................... 243
show gpon remote-onu sip-agent............................... 244
show gpon remote-onu sip-user ................................ 244
show gpon remote-onu vlan-filter ip-host.................... 245
show gpon remote-onu vlan-filter-mode ip-host........... 246
show gpon remote-onu vlan-tag ip-host ..................... 246
show gpon remote-onu voip-ctp ................................ 247
show gpon remote-onu voip-linestatus ....................... 247
GPON Protection Commands ......................................... 248
protection group...................................................... 248
protection prop ....................................................... 249
protection switch-command ...................................... 250
protection sync-data ................................................ 250
show protection group count ..................................... 251
show protection group prop ...................................... 251
show protection switch-command .............................. 252
show protection request ........................................... 252
show protection sync-data progress-bar ..................... 253
CES................................................................ 255
CES Global Property Management .................................. 255
ces ........................................................................ 255
tdm-profile ............................................................. 255
show ces tdm-profile................................................ 257
mac-address ........................................................... 258
ip-address .............................................................. 258
show ces global-prop ............................................... 259
sdhprot group ......................................................... 259
sdhprot prop ........................................................... 260
sdhprot switch-command.......................................... 260
show ces sdhprot group count ................................... 261
show ces sdhprot group prop .................................... 262
show ces sdhprot switch-command ............................ 262
show ces sdhprot request ......................................... 262
show ces sdhprot sync-data ...................................... 263
Interface Property Management..................................... 263
interface tdm_X/X/X ................................................ 263
admin-status .......................................................... 264
clock-source ........................................................... 264
line-coding ............................................................. 265
line-type ................................................................ 266
loopback ................................................................ 266
range..................................................................... 267
framing .................................................................. 267
au-3 ...................................................................... 268
au-4 tug-3.............................................................. 268
tug-2{e1 | t1} ........................................................ 269
show ces interface ................................................... 270
CES-PW Service Property Management ........................... 270
pw......................................................................... 270
admin-status .......................................................... 271
name(ces-pw)......................................................... 271
psn........................................................................ 272
tdm-service ............................................................ 273
show ces pw count .................................................. 274
show ces pw prop ................................................... 274
SDH Protection Configuration ........................................ 275
sdhprot .................................................................. 275
sdhprot prop ........................................................... 275
sdhprot switch-command.......................................... 276
Performance Management............................. 279
pon ........................................................................... 279
onu-type .................................................................... 280
onu-type-attr gpon ...................................................... 280
onu-if ........................................................................ 281
performance cesmsb2 .................................................. 282
performance cesprotocol .............................................. 282
performance cesrfc1213 ............................................... 283
performance cesrfc1757 ............................................... 284
performance ceswanport .............................................. 284
performance GponOlt ................................................... 285
performance GponOnu ................................................. 286
performance cesrsb1.................................................... 286
performance cesvc4b3 ................................................. 287
performance cesvc12v5................................................ 288
performance cesvc12v5rei ............................................ 288
performance-threshold ................................................. 289
show onu-type ............................................................ 290
show onu-if ................................................................ 291
show onu-type-attr gpon .............................................. 292
ip-pool epon ............................................................... 292
power-switch .............................................................. 293
show performance olt................................................... 294
show performance onu ................................................. 294
Ethernet Interface Configuration................... 297
byname ..................................................................... 298
clear counter .............................................................. 298
description ................................................................. 299
duplex ....................................................................... 299
flowcontrol ................................................................. 300
hybrid-attribute........................................................... 300
interface .................................................................... 301
jumbo-frame .............................................................. 301
monitor session........................................................... 302
monitor session (Port).................................................. 302
multicast .................................................................... 303
negotiation auto .......................................................... 304
range......................................................................... 304
shutdown ................................................................... 305
speed ........................................................................ 305
port-protect ................................................................ 306
trust-cos .................................................................... 306
trust-dscp .................................................................. 307
ip address-group ......................................................... 307
ip arp inspection trust .................................................. 308
traffic-shape ............................................................... 308
priority....................................................................... 309
lacp timeout ............................................................... 309
lacp port-priority ......................................................... 310
rmon collection statistics .............................................. 310
rmon collection history ................................................. 311
eth-switch broadcast-limit ............................................ 311
eth-switch multicast-limit ............................................. 312
eth-switch unkowncast-limit.......................................... 312
eth-switch port-protect................................................. 313
eth-switch mac-protect ................................................ 313
eth-switch vlan-limit .................................................... 314
eth-switch mac-anti-spoofing ........................................ 314
show eth-switch .......................................................... 315
show eth-switch vlan-limit ............................................ 315
show interface ............................................................ 316
show ip interface ......................................................... 318
show monitor session................................................... 319
Uplink Port Protection Configuration ............. 321
uaps-group................................................................. 321
revertive .................................................................... 322
Protect-time ............................................................... 322
swap.......................................................................... 323
switch ........................................................................ 323
retry-link-detect .......................................................... 323
interval-link-detect ...................................................... 324
port master-portlist ..................................................... 324
show uaps groupid....................................................... 325
Tables ........................................................... 327
Index ............................................................ 329
List of Glossary.............................................. 337
Preface
Purpose
This manual provides procedures and guidelines that support the
operation of the ZXA10 C220 (V1.1.2).
Intended
Audience
This document is intended for engineers, technicians and subscribers who perform operation activities on the ZXA10 C220.
Prerequisite Skill
and Knowledge
To use this manual effectively, subscribers should have a general
understanding of network technology. Familiarity with the following is helpful:
What Is in This
Manual
�
Networking basics
�
Access Network (AN) technologies
�
GPON technology
�
ZXA10 C220 system and its various components
This manual contains the following chapters:
TABLE 1 CHAPTER SUMMARY
Related
Documentation
Chapter
Summary
Chapter 1, MSTP
Describes the commands related
to MSTP.
Chapter 2, LACP
to LACP.
Chapter 3, PIM Snooping
to PIM snooping.
Chapter 4, DHCP
to DHCP.
Chapter 5, GPON
to GPON.
Chapter 6, CES
to CES.
Chapter 7, Performance
Management
to performance management.
Chapter 8, Ethernet Interface
Configuration
Describes the commands
related to Ethernet interface
configuration.
The following documentation is related to this manual:
�
ZXA10 C220 (V1.1.2) GPON Optical Access Convergence
Equipment Documentation Guide
�
Equipment Technical Manual
Confidential and Proprietary Information of ZTE CORPORATION
i
ZXA10 C220 Command Manual (Volume IV)
Conventions
�
Equipment Hardware Manual
�
Equipment Hardware Installation Manual
�
Equipment Command Manual (Volume I)
�
Equipment Command Manual (Volume II)
�
Equipment Command Manual (Volume III)
�
Equipment Operation Manual (CLI)
�
Equipment Operation Manual (NetNumen)
�
Equipment Maintenance Manual
ZTE documents employ the following typographical conventions.
TABLE 2 TYPOGRAPHICAL CONVENTIONS
Typeface
Meaning
Italics
References to other Manuals and documents.
"Quotes"
Links on screens.
Bold
Menus, menu options, function names, input fields,
radio button names, check boxes, drop-down lists,
dialog box names, window names.
CAPS
Keys on the keyboard and buttons on screens and
company name.
Constant
width
Text that you type, program code, files and directory
names, and function names.
[ ]
Optional parameters
{ }
Mandatory parameters
I
Select one of the parameters that are delimited by it.
Note:
Note: Provides additional information about a certain
topic.
Checkpoint: Indicates that a particular step needs to
be checked before proceeding further.
Checkpoint:
Tip:
Tip: Indicates a suggestion or hint to make things
easier or more productive for the reader.
Mouse Operation Conventions are as follows:
ii
Preface
TABLE 3 MOUSE OPERATION CONVENTIONS
How to Get in
Touch
Typeface
Meaning
Click
Refers to clicking the primary mouse button (usually the
left mouse button) once.
Doubleclick
Refers to quickly clicking the primary mouse button
(usually the left mouse button) twice.
Right-click
Refers to clicking the secondary mouse button (usually
the right mouse button) once.
Drag
Refers to pressing and holding a mouse button and
moving the mouse.
The following sections provide information on how to obtain support for the documentation and the software.
Customer Support
If you have problems, questions, comments, or suggestions
regarding your product, contact us by e-mail at support@zt
e.com.cn. You can also call our customer support center at
(86) 755 26771900 and (86) 800-9830-9830.
Documentation Support
ZTE welcomes your comments and suggestions on the qual
ity and usefulness of this document. For further questions,
comments, or suggestions on the documentation, you can
contact us by e-mail at [email protected]; or you can fax
your comments and suggestions to (86) 755 26772236. You
can also browse our website at http://support.zte.com.cn,
which contains various interesting subjects like documentat
ion, knowledge base, forum and service request.
Declaration of
RoHS Compliance
To minimize the environmental impact and take more responsibility
to the earth we live, this document shall serve as formal declaration that ZXA10 C220 manufactured by ZTE CORPORATION is in
compliance with the Directive 2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect
to the following substances:
�
Lead (Pb)
�
Mercury (Hg)
�
Cadmium (Cd)
�
Hexavalent Chromium (Cr (VI))
�
PolyBrominated Biphenyls (PBB’s)
�
PolyBrominated Diphenyl Ethers (PBDE’s)
This declaration is issued based on our current level of knowledge.
Since conditions of use are outside our control, ZTE CORPORATION
makes no warranties, express or implied, and assumes no liability in
connection with the use of this information.
iii
This page is intentionally blank.
iv
Chapter
1
MSTP
Table of Contents
instance ............................................................................ 1
name ................................................................................ 2
revision............................................................................. 3
show spanning-tree inconsistentports.................................... 3
show spanning-tree instance................................................ 4
show spanning-tree interface ............................................... 4
show spanning-tree mst configuration ................................... 5
show spanning-tree statistics ............................................... 5
show spanning-tree transparent ........................................... 6
spanning-tree .................................................................... 7
spanning-tree bpduguard .................................................... 7
spanning-tree digestauto ..................................................... 8
spanning-tree edged-port .................................................... 8
spanning-tree forward-delay ................................................ 9
spanning-tree guard ..........................................................10
spanning-tree hello-time ....................................................10
spanning-tree linktype .......................................................11
spanning-tree max-age ......................................................11
spanning-tree mcheck........................................................12
spanning-tree mode...........................................................12
spanning-tree mst configuration ..........................................13
spanning-tree mst hmd5-digest...........................................14
spanning-tree mst hmd5-key ..............................................14
spanning-tree mst instance priority (Global)..........................15
spanning-tree mst instance priority(interface) .......................16
spanning-tree mst instance path-cost...................................16
spanning-tree mst max-hops ..............................................17
spanning-tree transparent ..................................................18
spanning-tree packet-type ..................................................18
instance
Syntax
instance instance vlans vlan-id
no instance instance
Purpose
Usage Guidelines
To create an instance in MSTP mode and map the instance to corresponding VLAN table
The following table provides parameter description:
1
Mode
Example
Parameter
Description
Value
instance
Instance ID
Range: 1 – 31
vlans vlan-id
VLAN identifier (range
or single VLAN)
Range: 1 – 4094
ZXAN(config-mstp)#
The following example displays how to create an instance in MSTP
mode and map the instance to corresponding VLAN table:
ZXAN(config)#spanning-tree mst configuration
ZXAN(config-mstp)#instance 1 vlans 10-20
ZXAN(config-mstp)#
Related
Commands
Related
Information
show spanning-tree mst configuration
spanning-tree mst configuration
By default, all VLANs are mapped to the Common Internal Spanning Tree (CIST).
Execute the no instance command to remap the specified
VLAN(s) or all VLANs to the CIST (MST instance 0).
User cannot map same VLAN to different MST instances. If the
user maps an already mapped VLAN to a new instance, the old
mapping is automatically removed.
name
Syntax
name name
no name
Purpose
Usage Guidelines
Mode
Example
To create an MST configuration name
Parameter
Description
Value
name
Configuration name
Range: 1 – 32
characters
ZXAN(config-mstp)#
The following example displays how to create an MST configuration
name:
ZXAN(config-mstp)#name zte
ZXAN(config-mstp)#
Related
Commands
2
Chapter 1 MSTP
revision
Syntax
revision revision
no revision
Purpose
Usage Guidelines
To configure the MSTP revision number
Parameter
Description
Value
revision
Revision number
Range: 1 – 65535
Default: 0
Mode
Example
ZXAN(config-mstp)#
The following example displays how to configure MSTP revision
number:
ZXAN(config-mstp)#revision 10
ZXAN(config-mstp)#
Related
Commands
Related
Information
The MSTP revision level, MST region name and VLAN-to-instance
mapping table jointly determine the MST region the device belongs
to.
show spanning-tree
inconsistentports
Syntax
Purpose
Usage Guidelines
Mode
Example
show spanning-tree inconsistentports
To display the information about inconsistent ports
None
All modes except exec mode
The following example displays the information about inconsistent
ports:
ZXAN#show spanning-tree inconsistentports
Mst Instance interface
Name
name
Inconsistency
--------------------------------------------MST00
gei_1/21/1
Root Inconsistent
ZXAN#
Related
Commands
show spanning-tree instance
show spanning-tree interface
3
Syntax
Purpose
Usage Guidelines
show spanning-tree instance instance
To display the information about an instance and its ports
Parameter
Description
Value
instance
Instance ID
Range: 1 – 31
Default: 0
Mode
Example
The following example displays the information about instance 0
and its ports:
ZXAN#show spanning-tree instance 0
MST00
Spanning tree enabled protocol MSTP
Root ID: Priority
4096;
Address 00d0.d0c7.ffe0
Hello-Time
5 sec; Max-Age 20 sec
Forward-Delay 10 sec;
RegRootID: Priority
4096;
BridgeID:
4096;
Address 00d0.d0c7.ffe0
5 sec; Max-Age 20 sec
10 sec; Max-Hops 5
0 sec;
RemainHops 5
Priority
Hello-Time
Forward-Delay
Message-Age
Address
00d0.d0c7.ffe0
Interface
Prio.Nbr
Name
Port ID Cost Sts
Role
LinkType Bound
-----------------------------------------------------------------tdm-gei_1/214/1 128.59
20000 Forward Designated p2p
MSTP
ZXAN#
Related
Commands
Syntax
Purpose
Usage Guidelines
Mode
Example
show spanning-tree interface port-name
To display the information about all instances of a designated port
Parameter
Description
Value
port-name
Interface name
-
The following example displays the information about all instances
of designated port gei_1/21/1:
ZXAN#show spanning-tree interface gei_1/21/1
4
Chapter 1 MSTP
Mst Instance
Prio.Nbr
Name
Port ID
Cost
Sts
Role
--------------------------------------------------------------MST00
128.31
200000
forward
root
MST01
112.31
200000
forward
root
---------------------------------------------------------------ZXAN#
Related
Commands
show spanning-tree mst
configuration
Syntax
Purpose
Usage Guidelines
Mode
Example
To enter the MSTP configuration mode
None
ZXAN(config)#
The following example displays how to enter into the MSTP configuration mode:
ZXAN(config-mstp)#
Related
Commands
Related
Information
In MSTP configuration mode, users can configure parameters of
MSTP such as MST configuration name, MST configuration version,
configuration digest etc.
show spanning-tree statistics
Syntax
Purpose
Usage Guidelines
Mode
Example
show spanning-tree statistics port-name
To display the STP port statistics
Parameter
Description
Value
port-name
Interface name
-
The following example displays the STP port statistics:
ZXAN#show spanning-tree statistics gei_1/21/1
statistic of port gei_1/21/1
-------------------------------------------------------------BPDU-related parameters
--------------------------------------------------------------
5
port spanning tree
enable
state
forward
port_priority
128
port_number
31
path cost
200000
designated_root
00-0d-0d-f0-01-01
designated_ext_cost
0
designated_int_cost
200000
designated_bridge
00-0d-0d-f0-01-01
designated_port
41
-------------------------------------------------------------PORT based information & statistics
-------------------------------------------------------------All bpdu’s xmitted
2
All bpdu’s received
123
Mst bpdu’s xmitted
2
Mst bpdu’s received
123
Rst bpdu’s xmitted
0
Rst bpdu’s received
0
config bpdu’s xmitted
0
config bpdu’s received
0
tcn bpdu’s xmitted
0
tcn bpdu’s received
0
-------------------------------------------------------------spanningtree based information & statistics
-------------------------------------------------------------spanningtree type
MSTP
multicast_mac_addr
01-80-c2-00-00-00
bridge priority
32768
bridge mac address
00-0d-0d-f0-01-01
bridge hello time
2 sec
bridge forward delay
15 sec
bridge Max age
20 sec
bridge Max hop
20
-------------------------------------------------------------ZXAN#
Related
Commands
show spanning-tree
transparent
Syntax
Purpose
Usage Guidelines
Mode
Example
show spanning-tree transparent
To display current status of the STP transparent-transmission flag
None
The following example displays the current status of the STP transparent-transmission flag:
ZXAN#show spanning-tree transparent
transparent flag:disabled
ZXAN#
6
Chapter 1 MSTP
Related
Commands
spanning-tree transparent
spanning-tree
Syntax
Purpose
Usage Guidelines
Mode
spanning-tree {enable | disable}
To enable or disable the MSTP globally
Parameter
Description
Value
enable
Enable MSTP
-
disable
Disable MSTP
-
ZXAN(config)#
ZXAN(config-if)#
Example
The following example displays how to enable MSTP globally and
disable MSTP on an interface:
ZXAN(config)#spanning-tree enable
ZXAN(config)#interface gei_1/21/1
ZXAN(config-if)#spanning-tree disable
ZXAN(config-if)#
Related
Commands
Related
Information
None
By default, MSTP is enabled globally but disabled on interfaces.
After enabling MSTP, MSTP dynamically monitors and maintains
spanning tree status of corresponding VLANs based on the received configuration BPDUs.
spanning-tree bpduguard
Syntax
spanning-tree bpduguard action {discard | shutdown}
no spanning-tree bpduguard action
Purpose
Usage Guidelines
Mode
To specify spanning tree BPDU guard action for interfaces
Parameter
Description
Value
action discard
Discard BPDU packet
-
action shutdown
Shutdown port
-
ZXAN(config-if)#
7
Example
The following example displays how to specify spanning tree BPDU
guard action for interfaces:
ZXAN(config-if)#spanning-tree bpduguard action shutdown
ZXAN(config-if)#
Related
Commands
Related
Information
None
By default, the BPDU guard is disabled.
spanning-tree digestauto
Syntax
Purpose
Usage Guidelines
Mode
Example
spanning-tree digestauto
To configure Cisco auto-generated digest value
None
ZXAN(config-if)#
The following example displays how to configure Cisco auto–generated digest value:
ZXAN(config-if)#spanning-tree digestauto
Related
Commands
spanning-tree mst hmd5-digest
spanning-tree edged-port
Syntax
Purpose
Usage Guidelines
Mode
Example
spanning-tree edged-port {enable | disable}
To specify (enable) or block (disable) an interface as edge port
Parameter
Description
Value
enable
Specify as edge port
-
disable
Restore to default
(non edge port)
-
ZXAN(config-if)#
The following example displays how to enable an interface as spanning tree edge port:
ZXAN(config-if)#spanning-tree edged-port enable
ZXAN(config-if)#
8
Chapter 1 MSTP
Related
Commands
Related
Information
spanning-tree linktype
spanning-tree packet-type
By default, this command is disabled for interfaces.
This command can be used by administrators to specify an edge
port. Enable this option if an interface is attached to a LAN segment that is at the end of bridged LAN or to an end node. Since
end nodes cannot cause forwarding loops, they can pass directly
through to the spanning tree forwarding state. Specifying edge
ports provides quicker convergence for devices such as workstations or servers, retains the current forwarding database to reduce
the amount of frame flooding required to rebuild address tables
during reconfiguration events, does not cause the spanning tree to
initiate reconfiguration when the interface changes state, and also
overcomes other STP-related timeout problems. However, edge
port should only be enabled for ports connected to an end-node
device.
spanning-tree forward-delay
Syntax
spanning-tree forward-delay time
no spanning-tree forward-delay
Purpose
Usage Guidelines
Mode
Example
To configure the spanning tree forward delay
Parameter
Description
Value
time
Forward delay in
seconds
Range: 4 – 30
Default: 15
ZXAN(config)#
The following example displays how to configure the spanning tree
forward delay as 16 seconds:
ZXAN(config)#spanning-tree forward-delay 16
ZXAN(config)#
Related
Commands
Related
Information
spanning-tree mst max-hops
spanning-tree hello-time
This command sets the maximum time (in seconds) the root device
waits before changing states (i.e., listening to learning to forwarding). This delay is required because every device must receive
information about topology changes before it starts to forward
frames. In addition, each port needs time to listen for conflicting information that would make it return to a discarding state;
otherwise, temporary data loops might result.
9
spanning-tree guard
Syntax
spanning-tree guard {loop | root} instance instance-range
no spanning-tree guard {loop | root} instance [instance-ran
ge]
Purpose
Usage Guidelines
Mode
Example
To configure STP guard mode on an interface
Parameter
Description
Value
loop
Set guard mode
to loop guard on
interface
-
root
Set guard mode
to root guard on
interface
-
instance instance-ra
nge
Instance range
Range: 0 – 31
ZXAN(config-if)#
The following example displays how to configure STP guard mode
on an interface as root guard:
ZXAN(config-if)#spanning-tree guard root instance 0
ZXAN(config-if)#
Related
Commands
None
spanning-tree hello-time
Syntax
spanning-tree hello-time time
no spanning-tree hello-time
Purpose
Usage Guidelines
Mode
Example
10
To configure the spanning tree hello time (interval for sending
BPDU packets)
Parameter
Description
Value
time
Interval between
generation of
configured BPDUs
in seconds
Range: 1 – 10
Default: 2
ZXAN(config)#
hello time:
Chapter 1 MSTP
ZXAN(config)#spanning-tree hello-time 3
ZXAN(config)#
Related
Commands
Syntax
Purpose
Usage Guidelines
Mode
Example
spanning-tree linktype {auto | p2p | share}
To configure the spanning tree link type
Parameter
Description
Value
auto
Automatically derived
from the duplex mode
setting (p2p in full
duplex mode and
share in half duplex
mode)
-
p2p
Point-to-point link
-
share
Shared medium
-
ZXAN(config-if)#
link type to point-to-point:
ZXAN(config-if)#spanning-tree linktype p2p
ZXAN(config-if)#
Related
Commands
Related
Information
By default, link type is auto.
User can enable the fast status change function when the link type
of the port is p2p.
Specify a point-to-point link if the interface can only be connected
to exactly one other bridge, or a shared link if it can be connected
to two or more bridges. When automatic detection is selected, the
switch derives the link type from the duplex mode. A full-duplex
interface is considered a point-to-point link, while a half-duplex
interface is assumed to be on a shared link.
spanning-tree max-age
Syntax
spanning-tree max-age time
11
no spanning-tree max-age
Purpose
Usage Guidelines
Mode
Example
To configure the maximum age of the STP BPDU packet
Parameter
Description
Value
time
Maximum age of the
STP BPDU packet in
seconds
Range: 6 – 40
Default: 20
ZXAN(config)#
The following example displays how to configure the maximum age
of the STP BPDU packet:
ZXAN(config)#spanning-tree max-age 21
ZXAN(config)#
Related
Commands
Related
Information
This command sets the maximum time (in seconds) a device can
wait without receiving a configuration message before attempting to reconfigure. All device ports (except for designated ports)
should receive configuration messages at regular intervals. Any
port that ages out STP information (provided in the last configuration message) becomes the designated port for the attached LAN.
If it is a root port, a new root port is selected from among the
device ports attached to the network.
spanning-tree mcheck
Syntax
Purpose
Usage Guidelines
Mode
Example
spanning-tree mcheck
To configure the spanning tree mcheck
None
ZXAN(config)#
mcheck:
ZXAN(config-if)#spanning-tree mcheck
ZXAN(config-if)#
Related
Commands
None
spanning-tree mode
Syntax
12
spanning-tree mode {mstp | rstp | sstp}
Chapter 1 MSTP
Purpose
Usage Guidelines
Mode
Example
To configure the spanning tree mode
Parameter
Description
Value
mstp
Multi spanning tree
mode
-
rstp
Rapid spanning tree
mode
-
sstp
Single spanning tree
mode
-
ZXAN(config)#
mode:
ZXAN(config)#spanning-tree mode rstp
ZXAN(config)#
Related
Commands
Related
Information
spanning-tree
Default spanning tree mode is MSTP.
spanning-tree mst
configuration
Syntax
Purpose
Usage Guidelines
Mode
Example
To enter into MSTP configuration mode
None
ZXAN(config)#
The following example displays how to enter into MSTP configuration mode:
ZXAN(config-mstp)#
Related
Commands
Related
Information
In MSTP configuration mode, users can configure parameters of
MSTP such as MST configuration name, MST configuration version
and configuration digest.
13
spanning-tree mst
hmd5-digest
Syntax
spanning-tree mst hmd5-digest {cisco | huawei} key
no spanning-tree mst hmd5-digest {cisco | huawei}
Purpose
Usage Guidelines
Mode
Example
To configure MST HMD5 digest key parameters
Parameter
Description
Value
cisco
Cisco key
-
huawei
Huawei key
-
key
HMD5 digest value
34 characters (For
example: 0x...32)
ZXAN(config)#
The following example displays how to configure MST HMD5 digest
key parameters
ZXAN(config)#spanning-tree mst hmd5-digest cisco 0x123456789012345678
90123456789012
ZXAN(config)#
Related
Commands
Related
Information
spanning-tree mst hmd5-key
As different manufacturers (such as Cisco and Huawei) implement
MSTP (via MSTP packet format) differently from IEEE standards,
the user must configure a key or digest value for ZTE switch before
connecting to the equipment.
The default value is 0x00000000000000000000000000000000.
spanning-tree mst hmd5-key
Syntax
spanning-tree mst hmd5-key {cisco | huawei} key
no spanning-tree mst hmd5-key {cisco | huawei}
Purpose
Usage Guidelines
14
To configure the MST HMAC MD5 digest
Parameter
Description
Value
cisco
Cisco key
-
huawei
Huawei key
-
key
HMD5_key (0x... 32
HEX- KEYs)
34 characters (For
example: 0x...32)
Chapter 1 MSTP
Mode
Example
ZXAN(config)#
MST HMAC MD5 digest:
ZXAN(config)#spanning-tree mst hmd5-key CISCO 0x12345678901234567890
123456789012
ZXAN(config)#
Related
Commands
Related
Information
spanning-tree mst hmd5-digest
As different manufacturers (such as Cisco and Huawei) implement
MSTP (via MSTP packet format) differently from IEEE standards,
the user must configure a key or digest value for ZTE switch before
connecting to the equipment.
spanning-tree mst instance
priority (Global)
Syntax
spanning-tree mst instance instance priority priority
no spanning-tree mst instance instance priority
Purpose
Usage Guidelines
To configure the MST instance priority
Parameter
Description
Value
instance
Instance ID
Range: 0 – 31
Default: 0
priority priority
Mode
Example
Interface priority
Range: i x 4096 (i =
0 – 15)
ZXAN(config)#
The following example displays how to configure the MST instance
priority:
ZXAN(config)#spanning-tree mst instance 0 priority 4096
ZXAN(config)#
15
Related
Commands
spanning-tree mst instance priority (Interface configuration mode)
priority(interface)
Syntax
spanning-tree mst instance instance priority priority
no spanning-tree mst instance instance priority
Purpose
Usage Guidelines
To set the the port priority in some created instance
Parameter
Description
Value
instance
Instance number
Range: 0 – 16
priority priority
Port priority
Range: i*16 (i=0 –
15)
Default: 128
Maximum Value: 240
Mode
Example
ZXAN(config-if)#
The following example displays how to set the port priority to be
112 at port gei_0/6/1 in the instance 0:
ZXAN(config-if)#spanning-tree mst instance 0 priority 112
Related
Commands
Related
Information
spanning-tree mst instance priority (global)
Using this command, the administrator can change the topology
of spanning tree.
path-cost
Syntax
Purpose
Usage Guidelines
spanning-tree mst instance instance {path-cost cost | prior
ity priority}
To configure the MST instance path cost and priority
Parameter
Description
Value
instance
Instance ID
Range: 0 – 31
Default: 0
16
Chapter 1 MSTP
Mode
Example
Parameter
Description
Value
path-cost cost
Interface path cost
Range: 1 – 2000000
priority priority
Interface priority
Range: i x 4096 (i =
0 – 15)
ZXAN(config-if)#
The following example displays how to configure the MST instance
path cost:
ZXAN(config-if)#spanning-tree mst instance 0 path-cost 30000
ZXAN(config-if)#
Related
Commands
Related
Information
spanning-tree mst instance priority (Global configuration mode)
By default, the device automatically calculates the path cost of
ports in each MST instance based on corresponding standard.
Syntax
spanning-tree mst max-hops hop
no spanning-tree mst max-hops
Purpose
Usage Guidelines
Mode
Example
To configure the number of hops in an MST region before the BPDU
is discarded and the port information is aged out
Parameter
Description
Value
hop
Maximum hops of the
BPDU packet
Range: 1 – 40
Default: 20
ZXAN(config)#
The following example displays how to configure the number of
hops in an MST region before the BPDU is discarded and the port
information is aged out:
ZXAN(config)#spanning-tree mst max-hops 23
ZXAN(config)#
Related
Commands
Related
Information
spanning-tree mst max-age
Devices other than the root bridge in an MST region use the maximum hops setting on the root bridge.
17
spanning-tree transparent
Syntax
Purpose
Usage Guidelines
Mode
Example
spanning-tree transparent {enable | disable}
To enable or disable the spanning tree transparent flag
Parameter
Description
Value
enable
Enable STP
transparent flag
-
disable
Disable STP
transparent flag
-
ZXAN(config)#
The following example displays how to enable the spanning tree
transparent flag:
ZXAN(config)#spanning-tree disable
ZXAN(config)#spanning-tree transparent enable
ZXAN(config)#
Related
Commands
spanning-tree
Syntax
spanning-tree packet-type {IEEE | CISCO | HUAWEI | HAMM
ER}
no spanning-tree packet-type
Purpose
Usage Guidelines
Mode
Example
To configure the MST BPDU packet-type
Parameter
Description
Value
IEEE
Standard IEEE BPDU
packet
-
CISCO
Cisco BPDU packet
-
HAMMER
Hammer (Harbour
Networks) BPDU
packet
-
HUAWEI
Huawei BPDU packet
-
ZXAN(config-if)#
The following example displays how to configure the MST BPDU
packet-type to cisco:
ZXAN(config-if)#spanning-tree packet-type CISCO
18
Chapter 1 MSTP
ZXAN(config-if)#
Related
Commands
Related
Information
spanning-tree edged-port
By default, BPDU packet type is IEEE.
19
20
Chapter
2
LACP
Table of Contents
clear lacp .........................................................................21
interface ..........................................................................21
lacp port-priority ...............................................................22
lacp system-priority ...........................................................23
lacp timeout .....................................................................23
show lacp .........................................................................24
smartgroup ......................................................................24
smartgroup load-balance ....................................................25
clear lacp
Syntax
Purpose
Usage Guidelines
Mode
Example
clear lacp [smartgroup-id] counters
To clear the count of received and transmitted LACP packets
Parameter
Description
Value
smartgroup-id
Smart group number
Range: 1 – 32
counters
Counters
-
ZXAN#
The following example displays how to clear the count of received
and transmitted LACP packets:
ZXAN#clear lacp 1 counters
ZXAN#
Related
Commands
Related
Information
None
This command clears all counters if smartgroup-id parameter is
not used.
interface
Syntax
interface smartgroup smartgroup-number
21
no interface smartgroup smartgroup-name
Purpose
Usage Guidelines
Mode
Example
To create a smartgroup and enter the smartgroup interface configuration mode
Parameter
Description
Value
smartgroup
smartgroup-number
Smartgroup interface
number
Range: 1 – 8
ZXAN(config)#
The following example displays how to create a smartgroup and
enter the smartgroup interface configuration mode:
ZXAN(config)#interface smartgroup1
ZXAN(config-if)#
Related
Commands
Related
Information
None
Use the no form of this command to delete the smartgroup interface.
lacp port-priority
Syntax
Purpose
Usage Guidelines
lacp port-priority priority
To configure the LACP port priority
Parameter
Description
Value
priority
LACP port priority
Range: 0 – 65535
Default: 0
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the LACP port
priority:
ZXAN(config-if)#lacp port-priority 100
ZXAN(config-if)#
Related
Commands
Related
Information
22
show lacp
Use this command to add ports to link aggregation group according
to their priorities.
Chapter 2 LACP
lacp system-priority
Syntax
Purpose
Usage Guidelines
lacp system-priority priority
To configure the LACP system priority
Parameter
Description
priority
LACP system priority
Value
Range: 1 – 65535
Default: 32768
Mode
Example
ZXAN(config)#
The following example displays how to configure the LACP system
priority:
ZXAN(config)#lacp system-priority 100
ZXAN(config)#
Related
Commands
Related
Information
show lacp
After configuring this command, add ports to the link aggregation
group according to their priorities.
lacp timeout
Syntax
Purpose
Usage Guidelines
Mode
Example
lacp timeout {long | short}
To configure the interface LACP timeout
Parameter
Description
Value
long
LACP long timeout
-
short
LACP short timeout
-
ZXAN(config-if)#
The following example displays how to configure the interface LACP
to short timeout:
ZXAN(config-if)#lacp timeout short
ZXAN(config-if)#
Related
Commands
Related
Information
show lacp
By default, long timeout is configured.
When long timeout is configured, the system sends LACP packets
every 30 seconds.
23
When short timeout is configured, the system sends LACP packets
every one second.
show lacp
Syntax
show lacp {[smartgroup-id] {counters | internal | neighbors}
| sys-id}
Purpose
To display the current LACP configuration and state
Usage Guidelines
Mode
Example
Parameter
Description
Value
smartgroup-id
Smartgroup number
Range: 1 – 32
counters
Counters information
-
internal
Internal information
-
neighbors
Neighbors information
-
sys-id
System ID
information
-
The following example displays the current LACP configuration and
state:
ZXAN#show lacp 1 counters
Smartgroup:1
Actor LACPDUs Marker LACPDUs Marker
Port Tx Rx Tx Rx Err Err
----------------------------------------------------ZXAN#show lacp internal
Smartgroup:1
Flag *--LOOP is TRUE
Actor Agg LACPDUs Port Oper Port RX Mux
Port State Interval Priority Key State Machine Machine
-----------------------------------------------------ZXAN#show lacp neighbors
Smartgroup 1 neighbors
Actor Partner Partner Port Oper Port
Port System ID Port No. Priority Key State
----------------------------------------------------ZXAN#show lacp sys-id
0x8000,00d0.d0c7.ffe0
ZXAN#
Related
Commands
smartgroup
smartgroup
Syntax
24
smartgroup smartgroup-id mode {passive | active | on}
Chapter 2 LACP
no smartgroup
Purpose
Usage Guidelines
Mode
Example
To add interface to smartgroup and configure interface link aggregation mode
Parameter
Description
Value
smartgroup-id
Smart group ID
Range: 1 – 8
passive
Passive mode
-
active
Active mode
-
on
Static trunk
-
ZXAN(config-if)#
The following example displays how to add interface to smart
group:
ZXAN(config-if)#smartgroup 1 mode active
Related
Commands
Related
Information
show interface
show lacp
The VLAN configuration of member interface must be identical to
that of smartgroup. Otherwise, it is not allowed to join smartgroup.
The smartgroup VLAN property can be modified after the interface
is added to the smartgroup. The member interface automatically
modifies its VLAN property to keep consistent with smartgroup.
Execute the no form of this command to delete smartgroup.
smartgroup load-balance
Syntax
smartgroup load-balance mode
no smartgroup load-balance
Purpose
Usage Guidelines
Mode
Example
To configure the load balancing policy for smartgroup
Parameter
Description
Value
mode
Smartgroup mode
Keywords: dst-ip,
dst-mac, src-dst-ip,
src-dst-mac, src-ip,
src-mac
ZXAN(config-if)#
The following example displays how to configure the load balancing
policy for smartgroup:
25
ZXAN(config)#interface smartgroup1
ZXAN(config-if)#smartgroup load-balance src-mac
ZXAN(config-if)#
Related
Commands
26
show lacp
Chapter
3
PIM Snooping
Table of Contents
ip pim snooping.................................................................27
pim snooping ....................................................................27
show ip pim snooping all-statistic ........................................28
show ip pim snooping all-statistic clear .................................28
show ip pim snooping entry ................................................29
show ip pim snooping neighbor-info .....................................29
show ip pim snooping port-info............................................30
show ip pim snooping port-statistic clear interface .................30
show ip pim snooping port-statistic interface .........................31
ip pim snooping
Syntax
ip pim snooping
no ip pim snooping
Purpose
Usage Guidelines
Mode
Example
To enable PIM snooping
None
ZXAN(config)#
The following example displays how to enable PIM snooping:
ZXAN(config)#ip pim snooping
ZXAN(config)#
Related
Commands
None
pim snooping
Syntax
pim snooping
no pim snooping
Purpose
Usage Guidelines
Mode
Example
To configure PIM snooping for VLAN
None
ZXAN(config-vlan)#
The following example displays how to configure PIM snooping for
VLAN:
27
ZXAN(config)#ip pim snooping
ZXAN(config)#vlan 2
ZXAN(config-vlan)#pim snooping
ZXAN(config-vlan)#
Related
Commands
Related
Information
ip pim snooping
This command takes effect only when snooping is globally enabled.
show ip pim snooping
all-statistic
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping all-statistic
To display all PIM packet statistics
None
All modes
The following example displays how to display all PIM packet statistics:
ZXAN#show ip
RxHello
TxHello
DropRxTotal
RxTotal
Related
Commands
pim snooping all-statistic
=
0;
RxJoinPrune
=
=
0;
TxJoinPrune
=
=
0;
=
0;
TxTotal
=
0;
0;
0;
show ip pim snooping all-statistic clear
show ip pim snooping port-statistic clear interface
show ip pim snooping port-statistic interface
all-statistic clear
Syntax
Purpose
Usage Guidelines
Mode
Example
To display all (accumulated) statistics of PIM packets in clear mode
None
The following example displays all (accumulated) statistics of PIM
packets:
ZXAN#show ip
RxHello
TxHello
DropRxTotal
RxTotal
pim snooping all-statistic clear
=
0;
RxJoinPrune
=
0;
=
0;
TxJoinPrune
=
0;
=
0;
=
0;
TxTotal
=
0;
ZXAN#
28
Chapter 3 PIM Snooping
Related
Commands
show ip pim snooping all-statistic
show ip pim snooping port-statistic clear interface
show ip pim snooping entry
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping entry [vlan vid]
To display all VLAN entries for PIM snooping
Parameter
Description
Value
vlan vid
VLAN ID
Range: 1 – 4094
The following example displays all VLAN entries for PIM snooping:
ZXAN#show ip pim snooping entry
group entry number = 0:
index vlan Source-ip Group-ip
------------------------------ZXAN#
Related
Commands
show ip pim snooping port-info
show ip pim snooping neighbor-info
neighbor-info
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping neighbor-info
To display IP PIM snooping neighboring routers information
None
The following example displays IP PIM snooping neighboring
routers information:
ZXAN#show ip pim snooping neighbor-info
Port
vid
neighbor-ip-address
remain-time
------------------------------------------------------ZXAN#
Related
Commands
show ip pim snooping port-info
29
port-info
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping port-info vid
To display the VLAN port information
Parameter
Description
Value
vid
VLAN ID
Range: 1 – 4094
The following example displays the VLAN port information:
ZXAN#show ip pim snooping port-info 2
PIM Snooping is globally enabled.
PIM Snooping is enabled in this vlan.
vlan
Source-ip
Group-ip
Ports
Remain-time
---------------------------------------------------------------ZXAN#
Related
Commands
port-statistic clear interface
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping port-statistic clear interface interface
-name
To display statistics for all received PIM packets
Parameter
Description
Value
interface-name
Interface name
-
The following example displays the statistics for all received PIM
packets:
ZXAN#show ip
RxHello
TxHello
DropRxTotal
RxTotal
pim snooping port-statistic clear interface gei_0/11/1
=
0;
RxJoinPrune
=
0;
=
0;
TxJoinPrune
=
0;
=
0;
=
0;
TxTotal
=
0;
ZXAN#
30
Chapter 3 PIM Snooping
Related
Commands
port-statistic interface
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip pim snooping port-statistic interface interface-name
To display IP PIM related interface statistics
Parameter
Description
Value
interface-name
Interface name
-
The following example displays the port statistics
ZXAN#show ip
RxHello
TxHello
DropRxTotal
RxTotal
pim snooping port-statistic interface gei_0/11/1
=
0;
RxJoinPrune
=
0;
=
0;
TxJoinPrune
=
0;
=
0;
=
0;
TxTotal
=
0;
ZXAN#
Related
Commands
31
32
Chapter
4
DHCP
Table of Contents
DHCP Snooping Configuration .............................................33
DHCP L3 Publish Configuration ............................................38
DHCP Relay and DHCP Proxy Configuration ...........................41
DHCP Server Configuration .................................................46
DHCP Snooping
Configuration
ip dhcp snooping enable
Syntax
ip dhcp snooping enable
no ip dhcp snooping enable
Purpose
Usage Guidelines
Mode
Example
To enable DHCP snooping globally
None
ZXAN(config)#
The following example displays how to enable DHCP snooping globally:
ZXAN(config)#ip dhcp snooping enable
ZXAN(config)#
Related
Commands
None
ip dhcp snooping
Syntax
ip dhcp snooping {enable | disable} [pvc pvcno]
Purpose
To enable or disable DHCP snooping on an interface
Usage Guidelines
33
Mode
Example
Parameter
Description
Value
enable
Enable DHCP
snooping
-
disable
Disable DHCP
snooping
-
pvc pvcno
PVC number
Range: 1 – 8
ZXAN(config-if)#
The following example displays how to enable DHCP snooping:
ZXAN(config)interface vdsl_1/4/1
ZXAN(config-if)#ip dhcp snooping enable
ZXAN(config-if)#
Related
Commands
None
ip dhcp snooping quota
Syntax
ip dhcp snooping quota max-session [pvc pvcno]
no ip dhcp snooping quota [pvc pvcno]
Purpose
Usage Guidelines
Mode
Example
To configure the maximum number of DHCP snooping sessions
Parameter
Description
Value
max-session
Maximum DHCP
snooping sessions
Range: 1 – 255
pvc pvcno
PVC number
Range: 1 – 8
ZXAN(config-if)#
The following example displays how to configure the maximum
number of DHCP snooping sessions:
ZXAN(config)interface vdsl_1/4/1
ZXAN(config-if)#ip dhcp snooping quota 100
ZXAN(config-if)#
Related
Commands
None
ip dhcp snooping trust
Syntax
ip dhcp snooping trust interface
no ip dhcp snooping trust interface
Purpose
Usage Guidelines
34
To configure the interface (or a range of interfaces) as trusted
Chapter 4 DHCP
Parameter
Description
Value
interface
Interface name
gei_1/21 Interface
range: 1 – 2
Smartgroup Interface
range: 1 – 8
Mode
Example
ZXAN(config)#
The following example displays how to configure interface
gei_1/21/1 as trusted:
ZXAN(config)#ip dhcp snooping trust gei_1/21/1
ZXAN(config)#
Related
Commands
None
ip dhcp snooping vlan
Syntax
ip dhcp snooping vlan {vlan-name | vlan-no}
no ip dhcp snooping vlan {vlan-name | vlan-no}
Purpose
To enable DHCP snooping on a VLAN or VLAN range
Usage Guidelines
Mode
Example
Parameter
Description
Value
vlan-name
VLAN name
-
vlan-no
VLAN ID
Range: 1 – 4090
ZXAN(config)#
The following example displays how to enable DHCP snooping on
VLAN 2:
ZXAN(config)#ip dhcp snooping vlan 2
ZXAN(config)#
Related
Commands
None
show ip dhcp snooping configure
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip dhcp snooping configure
To display the global DHCP snooping configuration
None
The following example displays the DHCP snooping global configuration:
ZXAN#show ip dhcp snooping configure
35
DHCP snooping configure information
DHCP snooping globally state :enable(running)
not insert relay information in BOOTREQUEST
relay information policy: default(replace)
relay information format: default(china-tel)
ZXAN#
Related
Commands
None
show ip dhcp snooping port
Syntax
Purpose
Usage Guidelines
show ip dhcp snooping port interface [pvc pvcno| vport vport]
To display the DHCP snooping port’s user information
Parameter
Description
Value
interface
Interface name
Keywords: adsl_1/16,
adsl_1/17, vdsl_1/4
ADSL Interface
Range: 1 - 64
VDSL Interface
Range: 1 - 32
Mode
Example
pvc pvcno
PVC number
Range: 1 – 8
vport vport
Vport index
Range: 1 - 255
The following example displays the DHCP snooping port’s user information:
ZXAN#show ip dhcp snooping port vdsl_1/4/1
Status
: enable
Current online users are 0.
Index MAC addr
IP addr
Vlan State
Expiration
ZXAN#
Related
Commands
None
show ip dhcp snooping trust
Syntax
Purpose
Usage Guidelines
Mode
Example
36
show ip dhcp snooping trust
To display the DHCP snooping trusted interfaces
None
The following example displays the DHCP snooping trusted interfaces:
Chapter 4 DHCP
ZXAN#show ip dhcp snooping trust
Interface
State
---------------------gei_1/21/1
Trusted
ZXAN#
Related
Commands
None
show ip dhcp snooping vlan
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip dhcp snooping vlan [vlan-name | vlan-no]
To display DHCP snooping VLAN information
Parameter
Description
Value
vlan-name
VLAN name
-
vlan-no
VLAN number
Range: 1 – 4094
The following example displays how to display DHCP snooping
VLAN information:
ZXAN#show ip dhcp snooping vlan
DHCP snooping state on vlans
Vlan
State
---------------------------2
enable
300
enable
Related
Commands
None
show ip dhcp snooping port quota
Syntax
show ip dhcp snooping port quota interface [vport vportno]
[pvc pvcid]
Purpose
To display the maximum number of DHCP sessions on DHCP snooping port
Usage Guidelines
Mode
Parameter
Description
Value
interface
Interface
-
vport vportno
Vport ID
Range: 1 – 255
pvc pvcid
PVC ID
Range: 1 – 8
37
Example
The following example displays maximum number of DHCP session
on DHCP snooping port:
ZXAN(config-if)#show ip dhcp snooping port quota gpon-onu_0/9/1:1
Onu
Vport Quota
gpon-onu_0/9/1:1
1
255
Related
Commands
None
DHCP L3 Publish
Configuration
ip dhcp enable
Syntax
ip dhcp enable
no ip dhcp enable
Purpose
Usage Guidelines
Mode
Example
To enable the DHCP function
None
ZXAN(config)#
The following example displays how to enable the DHCP function:
ZXAN(config)#ip dhcp enable
ZXAN(config)#
Related
Commands
None
ip dhcp logging on
Syntax
ip dhcp logging on
no ip dhcp logging on
Purpose
Usage Guidelines
Mode
Example
To enable the DHCP logging
None
ZXAN(config)#
The following example displays how to enable the DHCP logging:
ZXAN(config)#ip dhcp logging on
ZXAN(config)#
38
Chapter 4 DHCP
Related
Commands
None
ip dhcp user quota
Syntax
ip dhcp user quota num
no ip dhcp user quota
Purpose
Usage Guidelines
Mode
Example
To configure DHCP user quota
The following table provide the parameter description:
Parameter
Description
Value
num
DHCP user quota
Range: 1 – 2000
ZXAN(config-if)#
The following example displays how to configure DHCP user quota:
ZXAN(config)#interface vlan 2
ZXAN(config-if)#ip dhcp user quota 2000
Related
Commands
show ip dhcp relay
ip dhcp server dns
ip dhcp server gateway
ip dhcp server leasetime
ip local pool
peer default ip pool
Related
Information
This command is valid for relay, server and proxy modes.
For DHCP Server, the user quota controls the maximum number of
DHCP users on port directly as well as the number of the allocated
IP addresses on port indirectly.
For DHCP Relay, since DHCP Relay protocol itself does not support
DHCP user quota, the DHCP user quota is ineffective. However,
when DHCP Relay IP address is bound to ARP, the DHCP user quota
configuration takes effect.
By default, there is no user quota.
Use the no form of this command to waive the user quota.
ip dhcp mode
Syntax
ip dhcp mode {relay | proxy | server}
no ip dhcp mode
Purpose
Usage Guidelines
To configure DHCP work mode
39
Mode
Example
Parameter
Description
Value
relay
DHCP relay mode
-
proxy
DHCP proxy mode
-
server
DHCP server mode
-
ZXAN(config-if)#
The following example displays how to configure DHCP work mode:
ZXAN(config-if)#ip dhcp mode proxy
ZXAN(config-if)#
Related
Commands
None
show ip dhcp configure
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip dhcp configure
To display the DHCP configuration information
None
The following example displays the DHCP configuration information:
ZXAN#show ip dhcp configure
DHCP process state information
process state : disable(stop)
logging flag : off
DHCP server configure:
available dns for client.master:
slave:
lease time of ip address: 3600 seconds
update arp state : disable
DHCP relay configure:
not insert relay information in BOOTREQUEST.
relay information policy: default(replace)
relay information format: default(china-tel)
relay retry times to server: 10
update arp state : disable
ZXAN#
40
Chapter 4 DHCP
Related
Commands
None
DHCP Relay and DHCP
Proxy Configuration
ip dhcp database
Syntax
ip dhcp database {read | write}
no ip dhcp database {read | write}
Purpose
Usage Guidelines
Mode
Example
To read from or write to DHCP database
Parameter
Description
Value
read
Read database from
memory
-
write
Write database to
memory
-
ZXAN(config)#
The following example displays how to write to DHCP database:
ZXAN(config)#ip dhcp database write
ZXAN(confif)#
Related
Commands
None
ip dhcp relay server retry
Syntax
ip dhcp relay server retry num
no ip dhcp relay server retry
Purpose
Usage Guidelines
To configure the retry times for packets from relay to server
Parameter
Description
Value
num
Request retry times
Range: 5 – 1000
Default: 10
Mode
ZXAN(config)#
41
Example
The following example displays how to configure the retry times
for packets:
ZXAN(config)#ip dhcp relay server retry 1000
ZXAN(config)#
Related
Commands
None
ip dhcp relay update arp
Syntax
ip dhcp relay update arp
no ip dhcp relay update arp
Purpose
Usage Guidelines
Mode
Example
To update ARP entries of DHCP bindings
None
ZXAN(config)#
The following example displays how to update ARP entries of DHCP
bindings:
ZXAN(config)#ip dhcp relay update arp
ZXAN(config)#
Related
Commands
Related
Information
None
This command is transparent to the user. When this command is
executed, secured ARP table entries (created by a DHCP server)
cannot be removed from the ARP table by executing the clear
arp-cache command. If a secure ARP entry created by the DHCP
server is required to be removed, the clear ip dhcp binding
command can be used. This command clears the DHCP binding
and secured ARP table entries.
ip dhcp proxy client leasetime
Syntax
ip dhcp proxy client leasetime seconds
no ip dhcp proxy client leasetime
Purpose
Usage Guidelines
Mode
Example
To configure DHCP proxy client lease time
Parameter
Description
Value
seconds
Proxy client lease
time in seconds
Range: 60 – 18000
Default: 60
ZXAN(config)#
The following example displays how to configure DHCP proxy client
lease time:
ZXAN(config)#ip dhcp proxy client leasetime 1000
ZXAN(config)
42
Chapter 4 DHCP
Related
Commands
None
ip dhcp relay server vclass-id
Syntax
ip dhcp relay server vclass-id string ip [standard | security]
no ip dhcp relay server vclass-id string [ip]
Purpose
Usage Guidelines
Mode
Example
To configure the map of vclass ID to DHCP relay server
Parameter
Description
Value
string
Vendor class identifier
name
Range: 1 – 50
characters
ip
DHCP relay server
address
A.B.C.D
standard
Standard DHCP
forward mode for
relay
-
security
Security DHCP
forward mode for
relay
-
ZXAN(config)#
The following example displays how to configure the map of vclass
ID to DHCP relay server:
ZXAN(config)#ip dhcp relay server vclass-id test 10.1.1.1 standard
ZXAN(config)#
Related
Commands
None
ip dhcp helper-address
Syntax
ip dhcp helper-address policy vclass-id
no ip dhcp helper-address policy vclass-id
Purpose
Usage Guidelines
Mode
Example
To configure DHCP helper address selection policy to forward request packet as per Option60 in relay and proxy modes
None
ZXAN(config-if)#
The following example displays how to configure the DHCP helper
address selection policy to forward request packet as per Option60
in relay and proxy modes:
ZXAN(config-if)#ip dhcp helper-address policy vclass-id
43
ZXAN(config-if)#
Related
Commands
Related
Information
None
If the Option60 field does not find matching server IP address,
discard the request packet.
ip dhcp relay agent
Syntax
ip dhcp relay agent ip-address
no ip dhcp relay agent
Purpose
Usage Guidelines
Mode
Example
To configure DHCP relay agent
Parameter
Description
Value
ip-address
DHCP relay agent
address
A.B.C.D
ZXAN(config-if)#
The following example displays how to configure DHCP relay
agent:
ZXAN(config-if)#ip dhcp relay agent 192.200.100.254
ZXAN(config-if)#
Related
Commands
None
ip dhcp relay server
Syntax
ip dhcp relay server ip-address [standard | security]
no ip dhcp relay server ip-address
Purpose
Usage Guidelines
44
To configure DHCP relay server address
Parameter
Description
Value
ip-address
DHCP relay server
address
A.B.C.D
standard
Standard DHCP
forward mode for
relay
-
security
Security DHCP
forward mode for
relay
-
Chapter 4 DHCP
Mode
Example
ZXAN(config-if)#
The following example displays how to configure DHCP relay server
address:
ZXAN(config-if)#ip dhcp relay server 192.200.100.254
ZXAN(config-if)#
Related
Commands
ip dhcp relay agent
show ip dhcp relay server vclass-id
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip dhcp relay server vclass-id [string]
To display DHCP server IP address and mapping relationship
Parameter
Description
Value
string
Vendor class identifier
name used to map
DHCP server
Range: 1 – 50
characters
The following example displays DHCP server IP address and the
mapping relationship:
ZXAN#show ip dhcp relay server vclass-id
test:
DHCP server :10.1.1.1
standard
ZXAN#
Related
Commands
None
show ip dhcp relay user
Syntax
Purpose
Usage Guidelines
show ip dhcp server user interface-name
To display the DHCP server online user information
Parameter
Description
Value
interface-name
Interface name
VLAN Range: 1 –
4090
Super VLAN Range: 1
– 255
Mode
Example
The following example displays the DHCP server online user information:
45
ZXAN#show ip dhcp server user vlan 2
Index MAC addr
IP addr
State
ZXAN#
Related
Commands
Expiration
None
show ip dhcp proxy client
Syntax
Purpose
Usage Guidelines
Mode
Example
show ip dhcp proxy client
To display DHCP proxy client parameters
None
The following example displays DHCP proxy client parameters:
ZXAN#show ip dhcp proxy client
DHCP client configure information in proxy mode:
leasetime :60 seconds
ZXAN#
Related
Commands
None
DHCP Server Configuration
ip local pool
Syntax
ip local pool pool-name begin-ip-address last-ip-address net-m
ask
no ip local pool pool-name begin-ip-address last-ip-address netmask
Purpose
Usage Guidelines
Mode
Example
46
To configure IP local pool
Parameter
Description
Value
pool-name
Pool name
Range: 1 – 16
characters
begin-ip-address
Beginning IP address
A.B.C.D
last-ip-address
Last IP address
A.B.C.D
net-mask
Subnet mask address
A.B.C.D
ZXAN(config)#
The following example displays how to configure IP local pool:
Chapter 4 DHCP
ZXAN(config)#ip local pool test 10.1.1.1 10.1.1.255 255.255.0.0
ZXAN(config)#
Related
Commands
None
ip local pool conflict-ip
Syntax
ip local pool conflict-ip timeout
no ip local pool conflict-ip
Purpose
Usage Guidelines
Mode
Example
To configure the timeout interval for conflicting IP addresses
Parameter
Description
Value
timeout
Conflict IP timeout in
minutes
Range: 1 – 60000
Default: 30
ZXAN(config)#
The following example displays how to configure the timeout interval for conflicting IP addresses to 60 minutes:
ZXAN(config)#ip local pool conflict-ip 60
ZXAN(config)#
Related
Commands
show ip local pool conflict-ip
clear ip pool conflict-ip
ip dhcp server dns
Syntax
ip dhcp server dns master-ip [slave-ip]
no ip dhcp server dns
Purpose
Usage Guidelines
Mode
Example
To configure DHCP server DNS address(es)
Parameter
Description
Value
master-ip
Master DNS address
A.B.C.D
slave-ip
Slave DNS address
A.B.C.D
ZXAN(config)#
The following example displays how to configure DHCP server DNS
addresses:
ZXAN(config)#ip dhcp server dns 10.1.1.1 10.1.1.10
ZXAN(config)#
47
Related
Commands
show ip dhcp server user
ip local pool
Syntax
ip dhcp server leasetime time
no ip dhcp server leasetime
Purpose
Usage Guidelines
To configure DHCP server lease time
Parameter
Description
Value
time
Lease time in seconds
Range: 60 – 18000
Default: 3600
Mode
Example
ZXAN(config)#
The following example displays how to configure DHCP server lease
time:
ZXAN(config)#ip dhcp server leasetime 1200
ZXAN(config)#
Related
Commands
ip dhcp server dns
ip dhcp server update arp
Syntax
ip dhcp server update arp
no ip dhcp server update arp
Purpose
Usage Guidelines
Mode
Example
To update the ARP entry of DHCP binding
None
ZXAN(config)#
The following example displays how to update the ARP entry of
DHCP binding:
ZXAN(config)#ip dhcp server update arp
ZXAN(config)#
48
Chapter 4 DHCP
Related
Commands
show ip dhcp relay server vclass-id
Syntax
ip dhcp server gateway ip-address
no ip dhcp server gateway [ip-address]
Purpose
Usage Guidelines
Mode
Example
To configure DHCP client gateway address
Parameter
Description
Value
ip-address
DHCP client gateway
address
A.B.C.D
ZXAN(config-if)#
The following example displays how to configure DHCP client gateway address:
ZXAN(config-if)#ip dhcp server gateway 10.1.1.1
ZXAN(config-if)#
Related
Commands
ip dhcp server dns
peer dafault ip pool
Syntax
peer default ip pool poolname
no peer default ip pool
Purpose
Usage Guidelines
Mode
Example
To configure default IP pool parameters
Parameter
Description
Value
poolname
Pool name
Range: 1 – 16
characters
ZXAN(config-if)#
The following example displays how to configure default IP pool
parameters:
ZXAN(config-if)#peer default ip pool test
ZXAN(config-if)#
49
Related
Commands
None
Syntax
Purpose
Usage Guidelines
show ip dhcp server user interface-name
To display the DHCP server online user information
Parameter
Description
Value
interface-name
Interface name
VLAN Range: 1 –
4090
Super VLAN Range: 1
– 255
Mode
Example
The following example displays the DHCP server online user information:
ZXAN#show ip dhcp server user vlan 2
Index MAC addr
IP addr
State
ZXAN#
Related
Commands
50
None
Expiration
Chapter
5
GPON
Table of Contents
GPON Global Commands ....................................................51
GPON OLT Commands ........................................................88
GPON ONU Basic Management Commands .......................... 105
GPON ONU Remote Management Commands....................... 127
VoIP Management Commands ........................................... 221
GPON Protection Commands ............................................. 248
GPON Global Commands
gpon
Syntax
Purpose
Usage Guidelines
Mode
Example
gpon
To enter into the GPON mode
None
ZXAN(config)#
The following example displays how to enter into the GPON mode:
ZXAN(config)#gpon
ZXAN(config-gpon)#
Related
Commands
None
abort onu-version
Syntax
Purpose
Usage Guidelines
abort onu-version gpon-olt_shelf/slot/olt onu-list onulist
To abort ONU update version
Parameter
Description
Value
gpon-olt_shelf/slot/
olt
Shelf number, slot
number, OLT interface
Range: 1 – 19
characters
onu-list onulist
ONU numbers
-
51
Mode
Example
ZXAN(config-gpon)#
The following example displays how to abort ONU update version:
ZXAN (config)#gpon
ZXAN (config-gpon)# abort onu-version gpon-olt_0/4/1 onu-list 1-128
Related
Commands
None
activate onu-version
Syntax
Purpose
Usage Guidelines
Mode
Example
activate onu-version gpon-olt_shelf/slot/olt onu-list onulist
[onu-slot slotnum] region {0 | 1}
To activate ONU version
Parameter
Description
Value
olt
Shelf number, slot
Range: 1 – 19
characters
onu-list onulist
ONU numbers
-
onu-slot slotnum
ONU slot number
Range: 0 – 255
region {0 | 1}
Activated region
-
ZXAN(config-gpon)#
The following example displays how to activate ONU version:
ZXAN (config-gpon)# activate onu-version
gpon-olt_0/4/1 onu-list 1-128 region 1
Related
Commands
None
bandwidth-profile
Syntax
bandwidth-profile profile-name type tcont-type [fixed bandwid
th] [assured bandwidth] [maximum bandwidth]
no bandwidth-profile profile-name
Purpose
Usage Guidelines
52
To configure the bandwidth profile parameters
Parameter
Description
Value
profile-name
Bandwidth profile
name
Range: 1 – 63
characters
type tcont-type
Bandwidth template
TCONT type
Range: 1 – 5
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
assured bandwidth
Assured bandwidth:
only for type 2/3/5
Range: 64 – 1244160
Kbps
maximum bandwidth
Maximum bandwidth:
only for type 3/4/5
Range: 64 – 1244160
Kbps
fixed bandwidth
Fixed bandwidth: only
for type 1/5
Range: 64 – 1244160
Kbps
ZXAN(config-gpon)#
The following example displays how to configure the bandwidth
profile parameters:
ZXAN(config)#gpon
ZXAN(config-gpon)#bandwidth-profile band1 type 1 fixed
10000
ZXAN(config-gpon)#bandwidth-profile band1 type 3 assured
10000 maximum 100000
ZXAN(config-gpon)# bandwidth-profile band3 type 5 fix
10000 assured 100000 max 1000000
ZXAN(config-gpon)#
Related
Commands
Related
Information
None
The table describes the required and optional parameters based
on T-cont value.
T-Cont
Fix
Assured
Maximum
Remarks
1
Required
Optional
Optional
-
2
-
Required
Optional
-
3
-
Required
Required
Assured ≤
Maximum
4
-
-
Required
-
5
Required
Required
Required
Fix +
Assured ≤
Maximum
commit onu-version
Syntax
Purpose
Usage Guidelines
commit onu-version gpon-olt_shelf/slot/olt onu-list onulist
[onu-slot slotnum] region {0 | 1}
To configure ONU version initiation region
The following table provides the parameter description:
Parameter
Description
Value
olt
Shelf number, slot
Range: 1 – 19
characters
53
Mode
Example
Parameter
Description
Value
onu-list onulist
ONU numbers
-
onu-slot slotnum
ONU slot number
Range: 0 – 255
region {0 | 1}
Version region
-
ZXAN(config-gpon)#
The following example displays how to configure ONU version initiation region:
ZXAN(config-gpon)# commit onu-version gpon-olt_0/4/1 onu-list 1-128 region 1
Related
Commands
None
innerport
Syntax
Purpose
Usage Guidelines
Mode
Example
innerport {enable | disable} slot-id interface-number
To enable or disable the inner port between main control card and
line card
Parameter
Description
Value
enable
Enable inner port
-
disable
Disable inner port
-
slot-id
Inner port slot ID
Range: 2 – 14
interface-number
Interface number
Range: 1 – 4
ZXAN(config-gpon)#
The following example displays how to enable the inner port between main control card and line card:
ZXAN(config)#gpon
ZXAN(config-gpon)#innerPort enable 2 3
ZXAN(config-gpon)#
Related
Commands
None
onu-ver
Syntax
onu-ver {delete | download} version-name slot slot-id
onu-ver update version-name slot slot-id olt olt-id onu-list
onu-list
Purpose
Usage Guidelines
54
To manage the ONU version
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
delete
Delete ONU version
-
download
Download ONU
version
-
update
Update ONU version
-
version-name
ONU version name
Range: 1 – 13
characters
slot slot-id
ONU slot ID
-
olt olt-id
OLT ID
-
onu-list onu-list
ONU number
Range: 1 – 31
characters
ZXAN(config-gpon)#
The following example displays how to manage the ONU version:
ZXAN(config)#gpon
ZXAN(config-gpon)#onu-ver delete version1 slot 2
ZXAN(config-gpon)#onu-ver download version1 slot 2
ZXAN(config-gpon)#onu-ver update verssion1 slot 2 olt 4
onu-list 10
ZXAN(config-gpon)#
Related
Commands
Related
Information
None
ONU version update work flow is as follows:
�
Download version update software file to main control card by
executing the download command in version mode.
�
Download update version from main control card to line card
by executing the onu-ver download command in GPON global
configuration mode.
�
Update line cards in batch by executing the onu-ver update
command in GPON global configuration mode.
onu-batch-cfg
Syntax
Purpose
Usage Guidelines
onu-batch-cfg {[gpon-onu_shelfId/slotId/oltId:{[onuId1,onuI
d2..] | [onuId1 - onuId2]}] | [gpon-virtual-onu_name]} from
{[gpon-onu_shelfId/slotId/oltId :onuId | [gpon-virtual-onu_na
me]
To copy one ONU configuration to other ONU(s)
Parameter
Description
Value
gpon-onu_shelfId/slo
tId/oltId:{[onuId1,o
nuId2..] | [onuId1 onuId2]}
Destination ONU
interface
Range: 1 – 128
55
Mode
Example
Parameter
Description
Value
gpon-virtual-onu_n
ame
Virtual ONU interface
-
gpon-onu_shelfId/slot
Id/oltId :onuId
Real ONU interface
-
ZXAN(config-gpon)#
The following example displays how to copy one ONU configuration
to other ONUs:
ZXAN(config-gpon)#onu-batch-cfg gpon-onu_0/3/1:1,3 from gpon-onu_0/4/1:1
Related
Commands
Related
Information
None
�
Source ONU and the ONU to be configured must be registered
to avoid errors.
�
ONU may be real or virtual. If destination ONU is real ONU,
ONU batch configuration can be made only under the same
OLT.
performance-threshold bridge-port
Syntax
performance-threshold bridge-port profile-name [delay-exc
eeded-discard value1] [mtu-exceeded-discard value2] [rece
ived-and-discarded value3]
no performance-threshold bridge-port profile-name
Purpose
Usage Guidelines
Mode
Example
To create the ONU bridge-port performance statistics alarm threshold profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
characters
bridge-port
Bridge port
performance statistics
-
delay-exceeded-dis
card value1
Delay discarded frame
alarm threshold value
Range: 1 – (232 – 1)
mtu-exceeded-disc
ard value2
MTU-exceeded
discarded frame alarm
threshold value
Range: 1 – (232 – 1)
received-and-disca
rded value3
Error discarded frame
Range: 1 – (232 – 1)
ZXAN(config-gpon)#
The following example displays how to create the ONU bridge-port
performance statistics alarm threshold profile:
ZXAN(config-gpon)# performance-threshold bridge-port default-uni
56
Chapter 5 GPON
delay-exceeded-discard 100 mtu-exceeded-discard 200 received-and-discarded 300
Related
Commands
None
performance-threshold ces
Syntax
performance-threshold ces profile-name [down-missing
value1] [down-reordered value2] [down-misordered value3]
[down-buffer-underrun-overrun value4] [down-malformed
value5] [down-stray value6] [down-remote-loss value7]
[down-es value8] [down-ses value9] [down-uas value10]
no performance-threshold ces profile-name
Purpose
Usage Guidelines
To create the the ONU CES performance statistics alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
characters
ces
CES performance
statistics
-
down-missing
value1
Packet loss statistics
Range: 1 – (232 – 1)
down-reordered
value2
Reordered packet
statistics alarm
threshold value
Range: 1 – (232 – 1)
down-misordered
value3
Discarded unordered
packet alarm
threshold value
Range: 1 – (232 – 1)
down-buffer-under
run-overrun value4
Buffer abnormal
packet statistics alarm
threshold value
Range: 1 – (232 – 1)
down-malformed
value5
Malformed packet
statistics alarm
threshold value
Range: 1 – (232 – 1)
down-stray value6
Stray packet statistics
Range: 1 – (232 – 1)
down-remote-loss
value7
Remote packet loss
statistics alarm
threshold value
Range: 1 – (232 – 1)
down-es value8
Error second statistics
Range: 1 – (232 – 1)
57
Mode
Example
Parameter
Description
Value
down-ses value9
Severe error second
statistics alarm
threshold value
Range: 1 – (232 – 1)
down-uas value10
Unavailable error
second alarm
threshold value
Range: 1 – (232 – 1)
ZXAN(config-gpon)#
The following example displays how to create the ONU CES performance statistics alarm threshold profile:
ZXAN(config-gpon)# performance-threshold ces default-ces down-missing 1000
down-reordered 1000 down-misordered 1000
Related
Commands
None
performance-threshold dot1x
Syntax
performance-threshold dot1xprofile-name [rx-invalid-eapol
received-invalid-eapol-frames] [rx-len-err-eap received-lengtherror-eap-frames]
no performance-threshold dot1x profile-name
Purpose
Usage Guidelines
Mode
Example
To create the ONU dot1X performance alarm threshold profile
Parameter
Description
Value
rx-invalid-eapol
received-invalid-eapol
-frames
Received invalid
EAPOL frame
threshold value
Range: 1 –
4294967295
rx-len-err-eap
received-length-er
ror-eap-frames
Received lengtherrored EAP frame
threshold value
Range: 1 –
4294967295
ZXAN(config-gpon)#
The following example displays how to create the ONU dot1X performance alarm threshold profile:
ZXAN(config-gpon)#performance-threshold dot1x default-dot1x rx-invalid-eapol100
Related
Commands
None
performance-threshold eth
Syntax
58
performance-threshold eth profile-name [fcs-err value1] [exc
essive-collision value2] [late-collision value3] [too-long valu
Chapter 5 GPON
e4] [rx-buf-overflow value5] [tx-buf-overflow value6] [singl
e-collision value7] [multi-collisions value8] [sqe value9] [def
erred-tx value10] [internal-mac-tx-err value11] [internal-ma
c-rx-err value12] [carrier-sense-err value13] [alignment-err
value14] [pppoe-filtered value15] [drop-events value16] [und
ersize value17] [fragments value18] [jabbers value19]
no performance-threshold eth profile-name
Purpose
Usage Guidelines
To create the ONU Ethernet UNI performance statistics alarm
threshold profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
characters
eth
Ethernet UNI interface
performance statistic
-
fcs-err value1
Frame-check-serial
error alarm threshold
value
Range: 1 – (232 – 1)
excessive-collision
value2
Discarded collision
frame alarm threshold
value
Range: 1 – (232 – 1)
late-collision value3
Delay collision times
Range: 1 – (232 – 1)
too-long value4
Too-long frame alarm
threshold value
Range: 1 – (232 – 1)
rx-buf-overflow
value5
Received buffer
overflow times alarm
threshold value
Range: 1 – (232 – 1)
tx-buf-overflow
value6
Sent buffer overflow
times alarm threshold
value
Range: 1 – (232 – 1)
single-collision
value7
Single-collision and
successfully sent
alarm
Range: 1 – (232 – 1)
multi-collisions
value8
Multi-collision and
successfully sent
alarm
Range: 1 – (232 – 1)
sqe value9
Signal quality error
times alarm threshold
value
Range: 1 – (232 – 1)
deferred-tx value10
Deferred transmission
value
Range: 1 – (232 – 1)
internal-mac-tx-err
value11
Internal MAC
transmission error
Range: 1 – (232 – 1)
59
Mode
Example
Parameter
Description
Value
internal-mac-rx-err
value12
Internal MAC received
error alarm threshold
value
Range: 1 – (232 – 1)
carrier-sense-err
value13
Carrier sense error
Range: 1 – (232 – 1)
alignment-err
value14
Alignment error alarm
threshold value
Range: 1 – (232 – 1)
pppoe-filtered
value15
PPPoE filtered frame
Range: 1 – (232 – 1)
drop-events value16
Packet loss events
Range: 1 – (232 – 1)
undersize value17
Undersized packet
Range: 1 – (232 – 1)
fragments value18
Fragment alarm
threshold value
Range: 1 – (232 – 1)
jabbers value19
Jabbers alarm
threshold value
Range: 1 – (232 – 1)
ZXAN(config-gpon)#
The following example displays how to create the ONU Ethernet
UNI performance statistics alarm threshold profile:
ZXAN(config-gpon)# performance-threshold eth default-eth fcs-err 1000
excessive-collision 1000 late-collision 1000 too-long 1000
Related
Commands
None
performance-threshold gem
Syntax
performance-threshold gem profile-name [lost-packets valu
e1] [misinserted-packets value2] [impaired-blocks value3]
no performance-threshold gem profile-name
Purpose
Usage Guidelines
60
To create the ONU GEM port performance statistics alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
characters
gem
GEM port
performance statistic
-
lost-packets value1]
Lost GEM frame
threshold value
Range: 1 – (232 – 1)
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
misinserted-pack
ets value2
Mis-inserted GEM
value
Range: 1 – (232 – 1)
impaired-blocks
value3
Impaired blocks alarm
threshold value
Range: 1 – (232 – 1)
ZXAN(config-gpon)#
The following example displays how to create the ONU gem port
performance statistics alarm threshold profile:
ZXAN(config-gpon)# performance-threshold gem default-gem lost-packets 1000
misinserted-packets 2000 impaired-blocks 15
Related
Commands
None
performance-threshold radius
Syntax
performance-threshold radius profile-name [retx-access-req
retransmission-access-req-pkts] [rx-invalid-radius received-inv
alid-radius-pkts]
no performance-threshold radius profile-name
Purpose
Usage Guidelines
Mode
Example
To create/delete the ONU RADIUS performance alarm threshold
profile
Parameter
Description
Value
retx-access-req
retransmission-acces
s-req-pkts
Retransmitted access
request packet
threshold value
Range: 1 –
4294967295
rx-invalid-radius
received-invalid-radiu
s-pkts
Received invalid
RADIUS packet
threshold value
Range: 1 –
4294967295
ZXAN(config-gpon)#
The following example displays how to create the ONU radius performance alarm threshold profile:
ZXAN(config)#gpon
ZXAN(config-gpon)#performance-threshold radius default-radius retx-access-req 100
Related
Commands
None
pw-profile
Syntax
pw-profile profile-name [jitter-buffer-max-depth max-depth]
[jitter-buffer-desire-depth desire-depth] [fill-policy {ont-def
ault | ais-according | all-1s | all-0s | repeat-previous | ds1idle}] [misconnected-packets-declare percentage] [misconn
61
ected-packets-clear percentage] [loss-packets-declare perce
ntage] [loss-packets-clear percentage] [buffer-declear percen
tage] [buffer-clear percentage] [malformed-packets-declear
percentage] [malformed-packets-clear percentage] [r-bit-tra
nsmit-set number] [r-bit-transmit-clear number] [r-bit-recei
ve-policy {policy0 | policy1 | policy2}] [l-bit-receive-policy
{policy0 | policy1 | policy2}] [ses-threshold number]
Purpose
Usage Guidelines
To configure the PW parameter profile
Parameter
Description
Value
profile-name
PW property profile
name
Range: 1 – 63
jitter-buffer-max-d
epth max-depth
Maximum jitter buffer
depth
Range: 0 – 65535
jitter-buffer-desire
-depth desire-depth
Minimum jitter buffer
depth
Range: 0 – 65535
fill-policy
Fill policy when there
is no data
Default: ont-default
Default: 0
Default: 0
Specifications:
62
�
ont-default to be
determined
by
ONU
�
ais-according to
send AIS data
�
all-1s to send all
1s
�
all-0s to send all
0s
�
repeat-previous to repeat
the previous data
�
ds1-idle to send
DS1 idle data
misconnectedpackets-declare
percentage
misconnectedpackets alarmgenerated threshold
Range: 1 – 100
misconnected-pack
ets-clear percentage
misconnectedpackets alarm cleared
threshold
Range: 0 – 99
loss-packets-decl
are percentage
loss-packets
alarm-generated
threshold
Range: 1 – 100
loss-packets-clear
percentage
loss-packets alarm
cleared threshold
Range: 0 – 99
buffer-declare
percentage
buffer alarmgenerated threshold
Range: 1 – 100
Chapter 5 GPON
Parameter
Description
Value
buffer-clear
percentage
buffer alarm cleared
threshold
Range: 0 – 99
malformed-packets
-declare percentage
malformed-packets
alarm-generated
threshold
Range: 1 – 100
malformed-packets
-clear percentage
malformed-packets
alarm cleared
threshold
Range: 0 – 99
r-bit-transmit-set
number
Set R-bit threshold
Range: 0 – 255
r-bit-transmit-clear
number
Clear R-bit threshold
Range: 0 – 255
r-bit-receive-policy
Policy when error
at remote end is
received
Default: policy0
Specifications:
policy0 ignore
policy1: RAI/REI/RDI
indication that
generates specific
service
policy2: send idle
signaling and idle load
to all DS0 channels
l-bit-receive-policy
Policy when TDM
error at remote end is
received
Default: policy0
Specifications:
policy0 AIS indication
that generates
specific services
policy1 repeat the
previously received
packet
policy2 send idle
signalling and idle
load to all DS0
channels
ses-threshold
number
Mode
Example
SES counter threshold
Range: 0 – 65535
The counter
increments when
loss or errored
packet number in
one second exceeds
the threshold.
Default: 3
ZXAN(config-gpon)#
The following examples displays how to configure PW parameter
profile:
ZXAN(config-gpon)#pw-profile pw1 jitter-buffer-max-depth 100
ZXAN(config-gpon)#no pw-profile pw1
63
Related
Commands
Related
Information
None
This property configuration must be proceeded before PW link is
connected.
When PW link is connected, it is not allowed to modify or delete
this profile.
rate-limit igmp
Syntax
Purpose
Usage Guidelines
Mode
Example
rate-limit igmp slot-id igmp extract-rate
To configure IGMP rate limit
Parameter
Description
Value
slotId
Slot number
Range: 1 – 14
igmp extract-rate
Extracting rate
Range: 0 – 1000
ZXAN(config-gpon)#
The following examples displays how to configure IGMP rate limit:
ZXAN(config-gpon)#rate-limit igmp 5 256
Related
Commands
None
traffic-profile
Syntax
Purpose
Usage Guidelines
Mode
Example
traffic-profile profile-name sir information-rate pir informationrate
To configure the traffic profile parameters
Parameter
Description
Value
profile-name
Traffic profile name
Range: 1 – 63 characters
sir information-rate
Sustainable
information rate
Range: 64 – 1244160
kbps
pir information-rate
Peak information
rate
Range: 64 – 1244160
kbps
ZXAN(config-gpon)#
The following example displays how to configure the traffic profile
parameters:
ZXAN(config)#gpon
64
Chapter 5 GPON
ZXAN(config-gpon)#traffic-profile traffic1 sir
100000 pir 200000
ZXAN(config-gpon)#
Related
Commands
None
treat
Syntax
treat profile-name [remove-tag tagNum] [inner-prio{{insert
priority} | copy-inner | copy-outer}] [inner-vid{{insert vid}
| copy-inner | copy-outer}] [inner-tpid{mode0 | mode1 |
mode2 | mode3 | mode4 | mode5 | mode6 | mode7}] [out
er-prio {{insert priority} | copy-inner | copy-outer}] [outer
-vid{{insert vid} | copy-inner | copy-outer}] [outer-tpid{m
ode0 | mode1 | mode2 | mode3 | mode4 | mode5 | mode6
| mode7}]
no treat profile-name
Purpose
Usage Guidelines
To configure the profile for extension VLAN
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
remove-tag tagNum
Remove number of
tags from the received
frame
Range: 0 – 2
Inner-tag priority
operations:
-
inner-prio{{insert
priority} |
copy-inner |
copy-outer}
inner-vid{{insert
vid} | copy-inner |
copy-outer}
�
insert priority: insert priority
�
copy-inner copy
the original innertag priority
�
copy-outer copy
the original innertag priority
Default: 0
-
Inner-VLAN ID
operations:
�
insert vid
VLAN ID
�
copy-inner copy
the original innerVLAN ID
�
copy-outer copy
the original outerVLAN ID
insert
65
Parameter
Description
Value
inner-tpid{mode0
| mode1 | mode2 |
mode3 | mode4 |
mode5 | mode6 |
mode7}
Inner TPID
operations:
-
mode0 copy inner
TPID (and DE) from
the received frame
mode1 copy outer
TPID (and DE) from
the received frame
mode2 set TPID to
be output-tpid (this
parameter is set in
ex-vlan command
and copy inner DE
from the received
frame
mode3 set TPID to
parameter is set in
ex-vlan command
and copy outer DE
from the received
frame
mode4 set TPID to be
0x8100
mode5 remain
mode6 set TPID to
parameter is set in
ex-vlan command
and set DE to be 0
mode7 set TPID to
parameter is set in
ex-vlan command
and set DE to be 1
outer-prio
{{insert priority}
| copy-inner |
copy-outer}
66
Outer priority
operations:
�
insert priority insert priority
�
copy-inner copy
the original innerpriority
�
copy-outer copy
the original outerpriority
-
Chapter 5 GPON
Parameter
Description
Value
outer-vid{{insert
vid} | copy-inner |
copy-outer}
Outer-VLAN ID
operations:
-
outer-tpid{mode0
| mode1 | mode2 |
mode3 | mode4 |
mode5 | mode6 |
mode7}
�
insert vid
VLAN ID
�
copy-inner copy
the original innerVLAN ID
�
copy-outer copy
the original outerVLAN ID
insert
Outer TPID
operations:
-
mode0 copy inner
TPID (and DE) from
the received frame
mode1 copy outer
TPID (and DE) from
the received frame
mode2 set TPID to
parameter is set in
ex-vlan command
and copy inner DE
from the received
frame
mode3 set TPID to
parameter is set in
ex-vlan command
and copy outer DE
from the received
frame
mode4 set TPID to be
0x8100
Mode
Example
ZXAN(config-gpon)#
The following example displays how to configure profile for extension VLAN:
ZXAN(config-gpon)# treat 1 remove-tag 2
Related
Commands
Related
Information
None
When the profile is in use, it is not allowed to delete the profile for
extension VLAN to avoid error occurrence.
update onu-version
Syntax
Purpose
update onu-version version-name gpon-olt_shelf/slot/olt onu-l
ist onulist [onu-slot slotnum]
To inform ONU of updated version
67
Usage Guidelines
Mode
Example
Parameter
Description
Value
version-name
Version name
Range: 1 – 13
olt
Shelf number, slot
Range: 1 – 19
onu-list onulist
ONU number
-
onu-slot slotnum
ONU slot nubmer
Range: 0 – 255
ZXAN(config-gpon)#
The following examples displays how to inform ONU of updated
version:
ZXAN#version
ZXAN(version)#download onu-version f621.onu
ZXAN(version)#exit
ZXAN#configure terminal
ZXAN(config)#gpon
ZXAN(config-gpon)# update onu-version f621.onu gpon-olt_0/4/1 onu-list 1-128
Related
Commands
Related
Information
None
1. Execute the download onu-version command to download
ONU version file to main control card in version mode.
Note:
ONU version file needs to add a layer of version head information with pc.exe tool to generate xxx.onu version file. The d
ownload onu-version command allows to download xxx.onu
version file only. The currently saved ONU version file can be
viewed with show onu-version. Execute the delete to delete
ONU version file.
2. After ONU version file is downloaded to main control card successfully, execute the update onu-version command to inform ONU of updated version. Execute the show gpon onu
update-status command to view the updated status.
virtual-onu
Syntax
Purpose
Usage Guidelines
68
virtual-onu onu-name [type onu-type-name]
To create a virtual ONU
The following table provides the parameter description:
Parameter
Description
Value
onu-name
Virtual ONU name
-
type onu-type-name
ONU type
-
Chapter 5 GPON
Mode
Example
ZXAN(config-gpon)#
The following example displays how to create a virtual ONU:
ZXAN(config)#gpon
ZXAN(config-gpon)#gpon-virtual-onu F621 type ZTE-F621
Related
Commands
show gpon virtual-onu
threshold-profile
Syntax
threshold-profile profile-name [value]
no threshold-profile profile-name
Purpose
Usage Guidelines
Mode
Example
To configure the threshold profile parameters
Parameter
Description
Value
profile-name
Threshold profile
name
Range: 1 – 64
characters
value
Threshold value
Range: 1 –
42949672955
ZXAN(config-gpon)#
The following example displays how to configure the threshold profile parameters:
ZXAN(config)#gpon
ZXAN(config-gpon)#threshold-profile thresholdprofile
ZXAN(config-gpon)#threshold-profile thresholdprofile val1 100000
ZXAN(config-gpon)#
Related
Commands
None
scb-port-mode
Syntax
Purpose
Usage Guidelines
Mode
scb-port-mode slot-no {independent | shared}
To configure the SCB port mode
Parameter
Description
Value
slot-no
SCB port mode slot ID
Range: 2 – 14
independent
Independent mode
-
shared
Shared mode
-
ZXAN(config-gpon)#
69
Example
The following example displays how to configure the SCB port
mode to independent:
ZXAN(config)#gpon
ZXAN(config-gpon)#scb-port-mode 2 independent
ZXAN(config-gpon)#
Related
Commands
None
voip-media-profile
Syntax
voip-media-profile profile-name
voip-media-profile
profilename
[fax-mode
{passthru
|t38}] [codec-1st {pcmu | gsm | g723 | dvi4-rate8khz
| dvi4-rate16khz | lpc | pcma | g722 | l16-2channel |
l16-1channel | qcelp | cn| mpa| g728| dvi4-rate11khz
|
dvi4-rate22khz
|g729}]
[pkt-period-1st
10-30ms]
[silence-suppress-1st {off | on}]
voip-media-profile profilename [fax-mode {passthru |t38}]
[codec-2nd {pcmu | gsm |g723 | dvi4-rate8khz | dvi4-rat
e16khz | lpc | pcma | g722 | l16-2channel | l16-1channel
| qcelp | cn| mpa | g728 | dvi4-rate11khz | dvi4-rate22
khz |g729} ] [pkt-period-2nd 10-30ms] [silence-suppress1st {off |on}]
voip-media-profile profilename[fax-mode {passthru | t38}]
[codec-3rd {pcmu |gsm |g723 | dvi4-rate8khz | dvi4-rate
16khz | lpc | pcma | g722 | l16-2channel | l16-1channel |
qcelp | cn |mpa | g728 |dvi4-rate11khz | dvi4-rate22khz |
g729}] [pkt-period-3rd 10-30ms] [silence-suppress-1st {off
| on}]
voip-media-profile profilename [fax-mode {passthru | t38}]
[codec-4th {pcmu | gsm | g723 | dvi4-rate8khz | dvi4-rate
16khz | lpc | pcma | g722 | l16-2channel | l16-1channel |
qcelp | cn | mpa | g728 | dvi4-rate11khz | dvi4-rate22khz |
g729}] [pkt-period-1st 10-30ms] [silence-suppress-4th {off
|on}]
voip-media-profile profilename [oob-dtmf {disable |
enable}] [announce-type{silence | reorder-tone fast-busy
| voice-announce | na}] [jitterTarget targetvalue] [jitterMa
xBuf buffervalue] [echo-cancel {true | false}] [pstn-variant
variant] [min-port min-port] [max-port max-port] [dscp-mark
inHEX] [piggyback-event {enable | disable}] [tone-event
{enable | disable}] [dtmf-event {enable | disable}]
[cas-event {enable | disable}]
no voip-media-profile profile-name
Purpose
Usage Guidelines
70
To configure the VoIP media profile parameters
Parameter
Description
Value
profile-name
VoIP media profile
name
Range: 1 – 63
characters
Chapter 5 GPON
Parameter
Description
Value
announce-type
VoIP media profile
announce type
Fast-busy, na,
reorder-tone, silence
cas-event
VoIP media profile
CAS event
-
enable
Enable CAS event
-
disable
Disable CAS event
-
codec-1st
VoIP media profile
codec-1st, codec-2nd,
codec-3rd, codec-4th
pcmu, gsm, g723,
dvi4-rate8khz,
dvi4-rate16khz,
lpc, pcma,
g722/l16-2channel,
l16-1channel, qcelp,
cn, mpa, g728,
dvi4-rate11khz,
dvi4-rate22khz, g729
dscp-mark inHEX
DSCP mark number
Range: 1 – 2
characters
dtmf-event
DTMF event
-
echo-cancel
VoIP media profile
echo-cancel
-
false
Echo cancel type false
-
true
Echo cancel type true
-
fax-mode
fax-mode
passthru, t38
jitterMaxBuf
buffervalue
Jitter maximum buffer
value
Range: 0 – 65535 ms
jitterTarget
targetvalue
Jitter target value
Range: 0 – 65535 ms
max-port max-port
Maximum port
Range: 0 – 65535
min-port min-port
Minimum port
Range: 0 – 65535
oob-dtm
oob-dtm
piggyback-event
Piggyback event
-
pkt-period-1st
VoIP media profile
pkt-period-1st
pkt-period-2nd,
pkt-period-3rd,
pkt-period-4th
Range: 10 – 30 ms
PSTN variant
Range: 0 – 65535
codec-2nd
codec-3rd
codec-4th
pkt-period-2nd
pkt-period-3rd
pkt-period-4th
pstn-variant
variant
71
Parameter
Description
Value
silence-suppress1st
VoIP media profile
silence-suppress-1st,
silence-suppress-2nd,
silence-suppress-3rd,
silence-suppress-4th
ON, OFF
tone-event
Fast-busy type tone
event
-
enable
Enable oob-dtmf, CAS
event, DTMF event,
piggyback event, tone
event
-
disable
Disable oob-dtmf,
CAS event, DTMF
event, piggyback
event, tone event
-
silence-suppress2nd
silence-suppress3rd
silence-suppress4th
Mode
Example
ZXAN(config-gpon)#
The following example displays how to configure the VoIP media
profile parameters:
ZXAN(config)#gpon
ZXAN(config-gpon)#voip-media-profile profile1
ZXAN(config-gpon)#
Related
Commands
None
dial-plan-table
Syntax
dial-plan-table table-name [size size] [critical-timeout time]
[partial-timeout time] [format {not-defined | h248 | nsc |
vendor-specific}]
no dial-plan-table table-name
Purpose
Usage Guidelines
72
To configure the dial plan table parameters
Parameter
Description
Value
table-name
Dial plan table name
Range: 1 – 63
characters
size size
Maximum table size
Range: 1 – 255
characters
critical-timeout
time
Critical timeout in
milliseconds
Range: 0 – 65535
Chapter 5 GPON
Parameter
Description
Value
partial-timeout time
Partial timeout in
milliseconds
Range: 0 – 65535
format
Format type
H248
Not Specified
NSC
Vendor-specified
Mode
Example
ZXAN(config-gpon)#
The following example displays how to configure the dial-plan-table parameters:
ZXAN(config)#gpon
ZXAN(config-gpon)#dial-plan-table table1 size 255
critical-timeout 20 partial-timeout 20 format h248
ZXAN(config-gpon)#
Related
Commands
None
dial-plan
Syntax
dial-plan table-name id token name
no dial-plan table-name id
Purpose
Usage Guidelines
Mode
Example
To configure the dial plan parameters
Parameter
Description
Value
table-name
Dial plan name
Range: 1 – 63
characters
id
Dial plan ID
Range: 1 – 255
token name
Token name
Range: 1 – 28
characters
ZXAN(config-gpon)#
The following example displays how to configure the dial plan parameters:
ZXAN(config)#gpon
ZXAN(config-gpon)#dial-plan table1 100 token token1
ZXAN(config-gpon)#
73
Related
Commands
None
filter-rule
Syntax
filter-rule zero-tag filter-rule-name [{any | IPoE | PPPoE |
ARP}]
no filter-rule zero-tag filter-rule-name
filter-rule single-tag filter-rule-name [{any | IPoE | PPPoE |
ARP}] [inner-prio priority] [inner-vid vid] [inner-tpid {mode0
| mode4 | mode5 | mode6 | mode7}]
no filter-rule single-tag filter-rule-name
no filter-rule single-tag filter-rule-name
filter-rule double-tag filter-rule-name double-tag [{any |
IPoE | PPPoE | ARP}] [inner-prio priority] [inner-vid vid]
[inner-tpid {mode0 | mode4 | mode5 | mode6 | mode7}]
[outer-prio priority] [outer-vid vid] [outer-tpid {mode0 |
mode4 | mode5 | mode6 | mode7}]
no filter-rule double-tag filter-rule-name
Purpose
Usage Guidelines
To configure filter rule for extension VLAN
Parameter
Description
Value
filter-rule-name
Filter rule template
name for extension
VLAN
Range: 1 – 63
zero-tag
Filter untagged
Ethernet frame
-
{any | IPoE | PPPoE
| ARP}
Indicate the filtered
Ethernet type
-
Default: any
single-tag
Filter the single-tag
Ethernet
-
inner-prio priority
Inner-tag priority
Range: 0 – 7
Default: unfilter
inner-vid vid
Inner-tag VLAN ID
Range: 0 – 4094
Default: unfilter
74
Chapter 5 GPON
Parameter
Description
Value
inner-tpid {mode0
| mode4 | mode5 |
mode6 | mode7}
Inner-tag TPID filter
mode
Default: unfilter
mode0 unfilter
mode4tpid=8100
mode5 tpid=inputtpid ignore DE
mode6 tpid=inputtpid and DE=0
mode7 tpid=inputtpid and DE=1
double-tag
Filter Layer-2 tag
Ethernet
-
outer-prio priority
Outer-tag priority
Range: 0 – 7
Default: unfilter
outer-vid vid
Outer-tag VLAN ID
Range: 0 – 4094
Default: unfilter
outer-tpid {mode0
| mode4 | mode5 |
mode6 | mode7}]
Outer-tag TPID filter
mode:
-
mode0: unfilter
mode4: tpid=8100
mode5: tpid=inputtpid ignore DE
mode6: tpid=inputtpid and DE=0
mode7: tpid=inputtpid and DE=1
Mode
Example
ZXAN(config-gpon)#
The following example displays how to configure the filter rule for
extension VLAN:
ZXAN(config-gpon)#filter-rule zero-tag zero-tag-rule
Related
Commands
Related
Information
None
The filter rule cannot be deleted when it is in use.
Use no command to delete the filter rule.
flood-broadcast
Syntax
Purpose
Usage Guidelines
flood bandwidth bandwidth
To configure the flood bandwidth for OLT interface
75
Mode
Example
Parameter
Description
Value
bandwidth
Flood bandwidth size
in Kbps
Range: 64 – 2488320
ZXAN(config-if)#
The following example displays how to configure the flood bandwidth for OLT interface:
ZXAN(config)#interface gpon-olt_0/9/1
ZXAN(config-if)#flood bandwidth 100000
ZXAN(config-if)#
Related
Commands
None
schedule-mode
Syntax
Purpose
Usage Guidelines
Mode
Example
schedule-mode slotid slot-no {OnuOrGemport | pon}
To configure the schedule mode
Parameter
Description
Value
slotid slot-no
Slot ID
Range: 1 – 255
OnuOrGemport
Schedule at OMCC or
GEM port level
-
pon
Schedule at PON level,
each PON interface
support eight queues,
arithmetic by SP +
WRR
-
ZXAN(config-gpon)#
The following example displays how to configure the schedule
mode:
ZXAN(config)#gpon
ZXAN(config-gpon)#schedule-mode slotid 1 OnuOrGemport
ZXAN(config-gpon)#schedule-mode slotid 1 pon
ZXAN(config-gpon)#
Related
Commands
None
show gpon-scb-port-mode
Syntax
Purpose
Usage Guidelines
76
show gpon scb-port-mode
To display the GPON SCB port mode configuration
None
Chapter 5 GPON
Mode
Example
The following example displays the GPON SCB port mode:
ZXAN(config)#gpon
ZXAN(config-gpon)#show gpon scb-port-mode
Slot Mode
----------------------9
independent
ZXAN(config-gpon)#
Related
Commands
None
show gpon dial-plan
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon dial-plan dial-plan-table-name [dial-plan-id]
To view dial plan information
Parameter
Description
Value
dial-plan-table-name
Network dial plan
table name
Range: 1 – 63
dial-plan-id
Dial plan ID
Range: 1 – 255
Any mode except exec mode
The following example displays how to view dial plan information:
ZXAN(config-gpon)#show gpon dial-plan test
Dial plan id
Dial plan token
------------------------------------1
zte
Related
Commands
None
show gpon dial-plan-table
Syntax
show gpon dial-plan-table [table-name]
Purpose
To view network dial plan table information
Usage Guidelines
Mode
Example
Parameter
Description
Value
table-name
Network dial plan
table name
Range: 1 – 63
characters
The following example displays how to view network dial plan table
information:
ZXAN(config-gpon)#show gpon dial-plan-table
TableName MaxSize
Critical Partial
Format
-----------------------------------------------
77
test
Related
Commands
255
20
20
h248
None
show gpon filter-rule
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon filter-rule [name filter-rule-name]
To view filter rule for extension VLAN
Parameter
Description
Value
name filter-rule-n
ame
Filter rule name for
extension VLAN
Range: 1 – 63
characters
The following example displays how to view filter rule for extension
VLAN:
ZXAN(config-gpon)#show gpon filter-rule
RuleName:
11
TagNum:
1
EtherType:
any
InnerPrio:
1
InnerVid:
1
InnerTPID
mode0
RuleName:
zero-tag-rule
TagNum:
0
EtherType:
any
Related
Commands
None
show gpon flood-broadcast
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon flood-broadcast [slotno slotid]
To display flood broadcast configuration information of OLT card
Parameter
Description
Value
slotno slotid
Slot number
Range: 1 – 14
The following example displays flood broadcast configuration information of OLT card:
ZXAN(config-if)#show gpon flood-broadcast
Slot
FloodState
BroadcastState
------------------------------------------------10
disable
enable
78
Chapter 5 GPON
Related
Commands
None
show gpon performance-threshold
bridge-port
Syntax
show gpon performance-threshold bridge-port [profile-na
me]
Purpose
To display the alarm threshold profile configuration information for
ONU bridge port performance statistics
Usage Guidelines
Mode
Example
Parameter
Description
Value
profile-name
Alarm threshold
profile name
Range: 1 – 63
The following example displays the alarm threshold profile configuration information for ONU bridge port performance statistics:
ZXAN(config-gpon)#show gpon performance-threshold bridge-port
Profile name:
Delay exceeded discard:
MTU exceeded discard:
Received and discarded:
Related
Commands
default-uni
100
200
300
None
ces
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon performance-threshold ces [profile-name]
To display the ONU CES performance statistics alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
The following example displays ONU CES performance statistic
alarm threshold profile:
ZXAN(config-gpon)#show gpon performance-threshold ces
Profile name
Down missing packets
Down reordered packets
Down misordered packets
default-ces
1000
1000
1000
79
Down
Down
Down
Down
Down
Down
Down
Related
Commands
buffer underrun overrun packets
malformed packets
stray packets
remote packet loss
errored seconds
severely errored seconds
unavailable seconds
0
0
0
0
0
0
0
None
dot1x
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon performance-threshold dot1x [profile-name]
To display the ONU dot1X performance statistics alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
The following example displays ONU dot1X performance statistic
ZXAN(config-gpon)#show gpon performance-threshold dot1x
Threshold profile:
1
Rx Invalid EAPOL packets:
0
Rx length errored EAP packets:
0
Related
Commands
None
eth
Syntax
Purpose
Usage Guidelines
Mode
80
show gpon performance-threshold eth [profile-name]
To display the ONU Ethernet UNI performance statistics alarm
threshold profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
Chapter 5 GPON
Example
The following example displays ONU Ethernet UNI performance
statistic alarm threshold profile:
ZXAN(config-gpon)#show gpon performance-threshold eth
Profile name
default-eth
Fcs error packets
1000
Excessive collision packets
1000
Late collision count
1000
Too long packets
1000
Rx buffer overflow count
0
Tx buffer overflow count
0
Single collision packets
0
Multiple collisions packets
0
Sqe count
0
Deferred transmission packets 0
Internal mac tx error packets 0
Internal mac rx error packets 0
Carrier sense error count
0
Alignment error packets
0
Pppoe filtered packets
0
Drop events count
0
Undersize packets
0
Fragments
0
Jabbers
0
Related
Commands
None
gem
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon performance-threshold gem [profile-name]
To display the ONU GEM port performance statistic alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
The following example displays ONU GEM port performance statistic alarm threshold profile:
ZXAN(config-gpon)#show gpon performance-threshold gem
Profile name
default-gem
Lost packets
1000
Misinserted packets
2000
Impaired blocks
15
Related
Commands
None
radius
Syntax
show gpon performance-threshold radius [profile-name]
81
Purpose
Usage Guidelines
Mode
Example
To display the ONU RADIUS performance statistic alarm threshold
profile
Parameter
Description
Value
profile-name
Profile name
Range: 1 – 63
The following example displays ONU radius performance statistic
ZXAN(config-gpon)#show gpon performance-threshold radius
Threshold profile:
test
ReTxAccessRequest:
0
RxInvalidRadius packets:
0
Related
Commands
None
show gpon profile bandwidth
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon profile bandwidth [profile-name]
To view broadband profile information related to GPON
Parameter
Description
Value
profile-name
Broadband profile
name
Range: 1 – 63
characters
The following example displays how to view broadband profile information related to GPON:
ZXAN(config)#show gpon profile bandwidth
Name :default
Type
FBW(kbps)
ABW(kbps)
MBW(kbps)
1
10000
0
0
Name :66
Type
FBW(kbps)
ABW(kbps)
MBW(kbps)
1
1000
0
0
Related
Commands
None
show gpon profile traffic
Syntax
Purpose
Usage Guidelines
82
show gpon profile traffic [profile-name]
To view traffic profile information related to GPON
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
profile-name
Traffic profile name
Range: 1 – 63
The following example displays how to view traffic profile information related to GPON:
ZXAN(config)#show gpon profile traffic
Name :default
SIR
PIR
10000
10000
Related
Commands
None
show gpon pw-profile
Syntax
show gpon pw-profile [profile-name]
Purpose
To view PW property profile information
Usage Guidelines
Mode
Example
Parameter
Description
Value
profile-name
PW property profile
name
Range: 1 – 63
characters
The following example displays how to view PW property profile
information:
ZXAN(config)#show gpon pw-profile
pw-profile:
pw1
jitter-buffer-max-depth:
100
jitter-buffer-desire-depth:
0
fill-policy:
ont-default
misconnected-packers-declare: 0
misconnected-packers-clear:
255
loss-packers-declare:
0
loss-packers-clear:
255
buffer-declare:
0
buffer-clear:
255
malformed-packets-declare:
0
malformed-packets-clear:
255
r-bit-transmit-set:
0
r-bit-transmit-clear:
0
r-bit-receive-policy:
policy0
l-bit-receive-policy:
policy0
ses-threshold:
3
Related
Commands
None
show gpon rate-limit igmp
Syntax
Purpose
show gpon rate-limit igmp [slotId]
To display IGMP rate limit for GPON
83
Usage Guidelines
Mode
Example
Parameter
Description
Value
slotId
Slot number
Range: 1 – 14
The following example displays how to display IGMP rate limit for
GPON:
ZXAN(config-gpon)#show gpon rate-limit igmp
Slot
IGMP rate
----------------------------3
256
5
256
12
256
Related
Commands
None
show gpon treat
Syntax
show gpon treat [name treat-name]
Purpose
To view operations for extension VLAN
Usage Guidelines
Mode
Example
Parameter
Description
Value
name treat-name
Operation name for
extension VLAN
Range: 1 – 63
characters
The following example displays how to view operations for extension VLAN:
ZXAN(config-gpon)#show gpon treat
TreatName:
1
TagsToRemove:
2
Related
Commands
None
show gpon virtual-onu
Syntax
show gpon virtual-onu [virtual-onu--name]
Purpose
To view virtual ONU configuration information
Usage Guidelines
Mode
84
Parameter
Description
Value
virtual-onu--name
Virtual ONU name
Range: 1 – 14
Chapter 5 GPON
Example
The following example displays how to view virtual ONU configuration information:
ZXAN(config)#show gpon virtual-onu
OnuName
OnuType
------------------------F621
ZTE-F621
Related
Commands
None
show gpon voip-media-profile
Syntax
Purpose
Usage Guidelines
Mode
Example
show voip-media-profile [table-name]
To display the VoIP media profile information
Parameter
Description
Value
table-name
VoIP media profile
name
Range: 1 – 63
characters
The following example displays the VoIP media profile information:
ZXAN(config)#gpon
ZXAN(config-gpon)#show voip-media-profile profile1
profilename: profile1, faxMode: t38
codecMode1st: qcelp, pktPeriod1st:
10,silenceSuppression1st: off
codecMode2nd: pcmu, pktPeriod2nd:
10,silenceSuppression2nd: off
codecMode3rd: pcmu, pktPeriod3rd:
10,silenceSuppression3rd: off
codecMode4th: pcmu, pktPeriod4th:
10,silenceSuppression4th: off
oobDTMF: enable, announceType: na
jitterTarget: 0, jitterMaxBuf: 0
echoCancelInd:true, pstnVariant: 0
minPort: 50000, maxPort: 60000,dscpMark: 46
piggybackEvents: disable,toneEvents: disable
dtmfEvents: enable,casEvents: enable
ZXAN(config-gpon)#
Related
Commands
None
show gpon profile
Syntax
Purpose
Usage Guidelines
show gpon profile {bandwidth | traffic} [profile-name]
To display the GPON profile configuration
85
Mode
Example
Parameter
Description
Value
bandwidth
Bandwidth
information
-
traffic
Traffic information
-
profile-name
Profile name
Range: 1 – 64
characters
The following example displays the GPON profile configuration:
ZXAN(config)#gpon
ZXAN(config-gpon)#show gpon profile bandwidth
Name
Type
FBW
ABW
MBW
default 1 10000
0
0
band1 1 10000
0
0
ZXAN(config-gpon)#
ZXAN(config-gpon)#show gpon profile traffic
Name
SIR
PIR
default
10000
10000
ZXAN(config-gpon)#
Related
Commands
None
show onu-ver
Syntax
Purpose
Usage Guidelines
Mode
Example
show onu-ver gpon-onu_shelf/slot/olt:onu region {0 | 1}
To display all information relating to ONU version
Parameter
Description
Value
gpon-onu_shelf/slot/
olt:onu
OLT shelf number, slot
number, port number
and ONU number
-
region
Version region
number
0,1
The following examples displays all ONU version information:
ZXAN(config)#show onu-ver gpon-onu_0/12/1:1 region 0
version:
R1.2.52.1
active :
true
commit :
true
valid :
true
86
Chapter 5 GPON
Related
Commands
None
show dial-plan-table
Syntax
Purpose
Usage Guidelines
Mode
Example
show dial-plan-table [profile-name]
To display the dial plan table information
Parameter
Description
Value
profile-name
Dial plan table profile
name
Range: 1 – 63
characters
The following example displays the dial plan table information:
ZXAN(config-gpon)#show dial-plan-table
TableName MaxSize
Critical Partial
Format
----------------------------------------------table1
255
20
20
h248
ZXAN(config-gpon)#
Related
Commands
None
show dial-plan
Syntax
Purpose
Usage Guidelines
Mode
Example
show dial-plan table-name id
To display the dial plan information
Parameter
Description
Value
table-name
Dial plan table name
Range: 1 – 63
characters
id
Dial plan ID
Range: 1 – 255
The following example displays the dial plan information:
ZXAN(config-gpon)#show dial-plan table1
dialPlanToken dialPlanEntryId
-------------------------------token1
201326592
ZXAN(config-gpon)#show dial-plan table1 12
dialPlanToken dialPlanEntryId
-------------------------------token1
201326592
ZXAN(config-gpon)#
87
Related
Commands
None
GPON OLT Commands
interface gpon-olt
Syntax
Purpose
Usage Guidelines
Mode
Example
interface gpon-olt_shelf/card/oltId
To enter into the GPON OLT interface mode
Parameter
Description
Value
gpon-olt_shelf/card/o
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 64
characters
ZXAN(config)#
The following example displays how to enter into the GPON OLT
interface mode:
ZXAN(config-if)#
Related
Commands
None
authtype
Syntax
Purpose
Usage Guidelines
Mode
Example
authtype {regid | sn}
To configure OLT interface authentication mode
Parameter
Description
Value
regid
Registration code
-
sn
Sequence number
-
ZXAN(config-if)#
The following example displays how to configure an OLT interface
authentication mode:
ZXAN(config-if)#authtype regid
ZXAN(config-if)#authtype sn
ZXAN(config-if)#
88
Chapter 5 GPON
Related
Commands
None
ber
Syntax
ber {both | down | up} {disable | enable} [calculate-interval
interval]
Purpose
To configure the uplink and downlink Bit Error Rate (BER) for an
OLT interface
Usage Guidelines
Mode
Example
Parameter
Description
Value
both
Both
-
down
Downlink error rate
-
up
Uplink error rate
-
disable
Disable
-
enable
Enable
-
calculate-interval
interval
BER counting interval
in seconds
Range: 8000 – 64000
ZXAN(config-if)#
The following example displays how to configure the uplink and
downlink Bit Error Rate (BER) for an OLT interface:
ZXAN(config-if)#ber both enable
ZXAN(config-if)#ber both enable calculate-interval 8000
ZXAN(config-if)#ber up enable calculate-interval 8000
ZXAN(config-if)#
Related
Commands
None
broadcast bandwidth
Syntax
Purpose
Usage Guidelines
Mode
broadcast bandwidth bandwidth-size
To configure the broadcast bandwidth for an OLT interface
Parameter
Description
Value
bandwidth-size
Broadcast bandwidth
size
Range: 64 – 2488320
Kbps
ZXAN(config-if)#
89
Example
The following example displays how to configure the broadcast
bandwidth for an OLT interface:
ZXAN(config-if)#broadcast bandwidth 100000
ZXAN(config-if)#
Related
Commands
None
description
Syntax
description description
no description
Purpose
Usage Guidelines
Mode
Example
To give description of an ONU interface
Parameter
Description
Value
description
Description
Range: 1 – 127
characters
ZXAN(config-if)#
The following example displays how to give description of an ONU
interface:
ZXAN(config)#interface gpon-onu_0/9/1:1
ZXAN(config-if)#description zteonu
ZXAN(config-if)#
Related
Commands
None
discover-period
Syntax
Purpose
Usage Guidelines
Mode
Example
90
discover-period {new_onu time} {miss_onu time}
To configure the time for discovering new ONU login or missing
ONU
Parameter
Description
Value
new_onu time
Time for discovering
new ONU login
Range: 0 – 3600
miss_onu time
Time for discovering
missed ONU
Range: 0 – 300
ZXAN(config-if)#
The following example displays how to configure the time for discovering new ONU login or missing ONU:
Chapter 5 GPON
ZXAN(config-if)#discover-period new_onu 1000 miss_onu 100
ZXAN(config-if)#
Related
Commands
None
dotlp-to-queue-map
Syntax
Purpose
Usage Guidelines
dot1p-to-queue-map [dot1p type {queue number}]
To configure the mapping relationship between CoS and queue
Parameter
Description
Value
dot1p type
Dot1p type
Dot1p0, dot1p1,
dot1p2, dot1p3,
dot1p4, dot1p5,
dot1p6, dot1p7
queue number
Dot1p queue number
Range: 0 – 7
Default: CoS 0 map
to queus 0, CoS 1
map to queus 1
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the mapping relationship between CoS and queue:
ZXAN(config-if)#dot1p-to-queue-map
ZXAN(config-if)#dot1p-to-queue-map dot1p0 0
ZXAN(config-if)#dot1p-to-queue-map dot1p0 0 dot1p5 5
ZXAN(config-if)#
Related
Commands
None
fec
Syntax
Purpose
Usage Guidelines
fec {bidirection | downstream | none | upstream}
To configure the FEC
Parameter
Description
Value
bidirection
Bidirectional
-
downstream
Downstream
-
none
None
-
upstream
Upstream
-
91
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the FEC:
ZXAN(config-if)#fec bidirection
ZXAN(config-if)#
Related
Commands
None
flood bandwidth
Syntax
Purpose
Usage Guidelines
Mode
Example
flood bandwidth bandwidth-size
To configure the flood bandwidth for an OLT interface
Parameter
Description
Value
bandwidth-size
Flood bandwidth size
Range: 64 – 2488320
Kbps
ZXAN(config-if)#
The following example displays how to configure the flood bandwidth for an OLT interface:
ZXAN(config-if)#flood bandwidth 100000
ZXAN(config-if)#
Related
Commands
None
ip access-group
Syntax
ip access-group group-number in
no ip access-group group-number in
Purpose
To configure ACL rule for GPON OLT
Usage Guidelines
Parameter
Description
Value
group-number
IP access group
number
Range:
Standard ACL: 1 –
349
Extension ACL: 1000
– 1999
in
Mode
Example
92
ACL rule direction
-
ZXAN(config-if)#
The following example displays how to configure ACL rule for GPON
OLT:
Chapter 5 GPON
ZXAN(config-if)#ip access-group 349 in
Related
Commands
Related
Information
None
Use no command to delete ACL rule.
linktrap
Syntax
Purpose
Usage Guidelines
Mode
Example
linktrap {disable | inform}
To configure link-up/link-down trap on an interface
The following table provides parameter:
Parameter
Description
Value
disable
When link status
changes, do not
inform NMS.
-
inform
When link status
changes, inform NMS.
-
ZXAN(config-if)#
The following example displays how to disable link trap on an interface:
ZXAN(config-if)#linktrap disable
Related
Commands
Related
Information
None
This command is disabled by default.
lock
Syntax
lock
no lock
Purpose
Usage Guidelines
Mode
Example
To lock (shutdown) an interface
None
ZXAN(config-if)#
The following example displays how to lock the interface gponolt_0/2/1:
ZXAN(config-if)#lock
Related
Commands
Related
Information
None
When an OLT interface is locked (shutdown), the OLT does not
report alarm if the current alarms are removed.
93
By default, GPON OLT interface is unlocked (no shutdown).
multicast bandwidth
Syntax
Purpose
Usage Guidelines
Mode
Example
multicast bandwidth bandwidth
To configure the multicast bandwidth
Parameter
Description
Value
bandwidth
Multicast bandwidth
Range: 64 – 2488320
Kbps
ZXAN(config-if)#
The following example displays how to configure the multicast
bandwidth:
ZXAN(config-if)#multicast bandwidth 100000
ZXAN(config-if)#
Related
Commands
None
pon-bandwidth
Syntax
Purpose
Usage Guidelines
Mode
Example
pon-bandwidth bandwidth
To configure the PON bandwidth for an OLT interface
Parameter
Description
Value
bandwidth
PON bandwidth
Range: 64 – 2488320
Kbps
ZXAN(config-if)#
The following example displays how to configure the PON bandwidth for an OLT interface:
ZXAN(config-if)#pon-bandwidth 10000
ZXAN(config-if)#
94
Chapter 5 GPON
Related
Commands
None
name
Syntax
name oltname
no name
Purpose
Usage Guidelines
Mode
Example
To name an OLT interface
Parameter
Description
Value
oltname
OLT name
Range: 1 – 127
characters
ZXAN(config-if)#
The following example displays how to name an OLT interface:
ZXAN(config-if)#name oltname
ZXAN(config-if)#
Related
Commands
Related
Information
None
Two OLT interfaces cannot have same name.
onu-def-reg
Syntax
Purpose
Usage Guidelines
onu-def-reg state {deactive | ready} pwmode {force |
none} [password password]
To configure the ONU default register information
Parameter
Description
Value
state
Default state of ONU
that is connected to
OLT interface
-
deactive
Deactivate default
state
-
ready
Activate default state
-
pwmode
Password mode
-
force
Forced password
pattern
-
95
Mode
Example
Parameter
Description
Value
none
Non password pattern
-
password password
Password
Range: 1 – 10
characters
ZXAN(config-if)#
The following example displays how to configure the ONU default
register information:
ZXAN(config-if)#onu-def-reg state ready pwmode
force password 123
ZXAN(config-if)#onu-def-reg state ready pwmode none
ZXAN(config-if)#
Related
Commands
None
range
Syntax
Purpose
Usage Guidelines
Mode
Example
range
To display the port list of specified range
None
ZXAN(config-if)#
The following example displays the port list of specified range:
ZXAN(config-if)#range
Portlist of the range: gpon-olt_0/9/1
ZXAN(config-if)#
Related
Commands
None
range-mode
Syntax
Purpose
Usage Guidelines
Mode
96
range-mode {mode0 | mode1 | mode2}
To configure the range mode
Parameter
Description
Value
mode0
Range distance
Range: 0 – 20 km
mode1
Range distance
Range: 20 – 40 km
mode2
Range distance
Range: 40 – 60 km
ZXAN(config-if)#
Chapter 5 GPON
Example
The following example displays how to configure the range mode:
ZXAN(config-if)#range-mode mode0
ZXAN(config-if)#
Related
Commands
None
register
Syntax
register onu-id type type-name vendorId vendor-id special-sn
state {deactive | ready} [mib-upload {false | true}]
no register onu-id
Purpose
Usage Guidelines
Mode
Example
To register a particular ONU to an OLT interface
Parameter
Description
Value
onu-id
ONU ID
Range: 1 – 64
type type-name
ONU type name
Range: 1 – 64
vendorId vendor-id
Vendor ID
Range: 1 – 4
characters
special-sn
Second part
of serial number(0xXXXXXXXX)
Range: 10 characters
state
State of ONU
-
deactive
Deactivate ONU
-
ready
Activate ONU
-
mib-upload
MIB upload
-
true
MIB upload true
-
false
MIB upload false
-
ZXAN(config-if)#
The following example displays how to register a particular ONU
to an OLT interface:
ZXAN(config-if)#register 1 type universalOnuType
vendorId ZTE 0x31000011 state ready mib-upload false
ZXAN(config-if)# register 1 type universalOnuType
vendorId ZTE 0x31000011 state ready mib-upload true
ZXAN(config-if)#
97
Related
Commands
None
reset
Syntax
Purpose
Usage Guidelines
Mode
Example
reset
To reset the GPON OLT
None
ZXAN(config-if)#
The following example displays how to reset GPON OLT:
ZXAN(config-if)#reset
ZXAN(config-if)#
Related
Commands
None
weight-mgmt
Syntax
Purpose
Usage Guidelines
Mode
Example
weight-mgmt [queue value]
To configure the weight of each queue under SP + WRR mode
Parameter
Description
Value
queue
Queue type
queue0,
queue2,
queue4,
queue6,
value
Weight value
Range: 0 – 255
ZXAN(config-if)#
The following example displays how to configure the weight of each
queue under SP + WRR mode:
ZXAN(config-if)#weight-mgmt queue0 100
ZXAN(config-if)#weight-mgmt queue5 100
ZXAN(config-if)#
Related
Commands
None
shutdown
Syntax
shutdown
no shutdown
98
queue1,
queue3,
queue5,
queue7
Chapter 5 GPON
Purpose
Usage Guidelines
Mode
Example
To administratively shutdown a GPON ONU interface
None
ZXAN(config-if)#
The following example displays how to administratively shutdown
a GPON ONU interface:
ZXAN(config-if)#gpon-onu_0/9/1:1
ZXAN(config-if)#shutdown
ZXAN(config-if)#
Related
Commands
None
show fec
Syntax
Purpose
Usage Guidelines
Mode
Example
show fec [gpon-olt_shelf/card/oltid]
To display the FEC information
Parameter
Description
Value
gpon-olt_shelf/card/o
ltid
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the FEC information:
ZXAN(config-if)#show fec gpon-olt_0/9/1
slot
mode
----------------------gpon-olt_0/9/1 upstream
ZXAN(config-if)#
Related
Commands
None
show gpon olt allocid
Syntax
Purpose
Usage Guidelines
show gpon olt allocid gpon-olt_shelf/slot/oltId onuid tcontid
To display the ONU TCONT-corresponding Alloc-ID
Parameter
Description
Value
gpon-olt_shelf/slot/o
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
99
Mode
Example
Parameter
Description
Value
onuId
ONU ID
Range: 1 – 128
characters
tcontId
TCONT ID
Range: 1 – 255
characters
The following example displays ONU TCONT-corresponding AllocID:
ZXAN(config-if)#show gpon olt allocid gpon-olt_0/3/1 1 1
allocId: 256
Related
Commands
None
show gpon olt flood bandwidth
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon olt flood-bandwidth gpon-olt_shelf/slot/olt
To display the flood bandwidth configuration information on OLT
interface
Parameter
Description
Value
olt
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following examples displays flood bandwidth configuration information on OLT interface:
ZXAN(config)#show gpon olt flood-bandwidth gpon-olt_0/3/1
Interface name
TotalBandwidth(Kbps)
------------------------------------------gpon-olt_0/3/1
10240
Related
Commands
None
show gpon olt multicast bandwidth
Syntax
Purpose
Usage Guidelines
100
show gpon olt multicast bandwidth gpon-olt_shelf/slot/oltId
To query the OLT interface multicast bandwidth configuration
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 19
characters
Chapter 5 GPON
Mode
Example
The following example displays OLT interface multicast bandwidth
configuration:
ZXAN(config)#show gpon olt multicast bandwidth gpon-olt_0/3/1
interfacename
totalBandwidth(Kbps)
-----------------------------------gpon-olt_0/3/1 10240
Related
Commands
None
show gpon olt config
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon olt config gpon-olt_shelf/slot/oltId
To query the GPON OLT interface configuration
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
-
ZXAN(config-if)#
The following example displays how to query GPON OLT interface
configuration:
ZXAN(config-if)#show gpon olt config gpon-olt_0/3/1
gpon-olt_0/3/1 Name:OLT-1
MaxSupportOnts :4194304 MaxSupportTconts :0
RealLegalOnts :0 RealIllegalOnts :0
Discovering onu:10 Missing onu :5
UpBer :disable Calculate interval:8000
DownBer :disable Calculate interval:8000
ONU Auto configuration#:
State :deactive PwMode :none
ONU authType :sn Method :provision
Related
Commands
None
show gpon olt broadcast-bandwidth
Syntax
Purpose
Usage Guidelines
show gpon olt broadcast-bandwidth [gpon-olt_shelf/slot/olt
Id]
To display the OLT broadcast bandwidth
101
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the GPON OLT broadcast-bandwidth:
ZXAN(config-if)#show gpon olt broadcast-bandwidth
gpon-olt_0/9/1
interfacename
BroadcastBandwidth(Kbps)
-----------------------------------------------gpon-olt_0/9/1 10240
ZXAN(config-if)#
Related
Commands
None
show gpon olt schedule-mode
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon olt schedule-mode [gpon-olt_shelf/slot/oltId]
To display the OLT configuration information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the OLT configuration information:
ZXAN(config-if)#show olt schedule-mode
gpon-olt_0/9/1
interfacename schedule-mode
---------------------------gpon-olt_0/9/1 pon
ZXAN(config-if)#
Related
Commands
None
show gpon olt dot1p-to-queue-map
Syntax
show gpon olt dot1p-to-queue-map [gpon-olt_shelf/slot/olt
Id]
Purpose
To display the mapping relationship between 802.1p CoS priority
and queue on OLT interface
Usage Guidelines
102
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the mapping relationship between
802.1p CoS priority and queue on OLT interface:
ZXAN(config-if)#show gpon olt dot1p-to-queue-map gpon-olt_0/9/1
Interfacename cos0
cos1
cos2
cos3
cos4
------------------------------------------------------gpon-olt_0/9/1 0
1
2
3
4
cos5
cos6
cos7
-------------------5
6
7
ZXAN(config-if)#
Related
Commands
None
show gpon olt weight-mgmt
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon olt weigh-mgmt [gpon-olt_shelf/slot/oltId]
To display the weight of each queue under SP + WRR mode
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the weight of each queue under SP
+ WRR mode:
ZXAN(config-if)#show gpon olt weigh-mgmt gpon-olt_0/9/1
interfacename queue0 queue1 queue2 queue3 queue4 queue5 queue6 queue7
--------------------------------------------------------------------gpon-olt_0/9/1
0
0
0
0
0
0
0
0
ZXAN(config-if)#
Related
Commands
None
show gpon olt pon-bandwidth
Syntax
Purpose
Usage Guidelines
show gpon olt pon-bandwidth [gpon-olt_shelf/slot/oltId]
To display the OLT PON bandwidth information
103
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the OLT PON bandwidth information:
ZXAN(config-if)#show olt pon-bandwidth gpon-olt_0/9/1
interfacename
PeakBandwidth(Kbps)
-----------------------------------------------gpon-olt_0/9/1 2488319
ZXAN(config-if)#
Related
Commands
None
show gpon olt portid
Syntax
Purpose
show gpon olt portid gpon-olt_shelf/slot/oltId onuid portid
To display the corresponding GEM port ID
Usage Guidelines
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onuid
ONU ID
1 – 128
portid
Port ID
1 – 256
The following example displays the corresponding GEM port ID:
ZXAN(config)#show gpon olt portid gpon-olt_0/3/1 1
Port Index
RealPort
--------------------------------------------------1
65
Related
Commands
None
show gpon olt range-mode
Syntax
Purpose
Usage Guidelines
104
show gpon olt range-mode gpon-olt_shelf/slot/oltId
To display the range mode information
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
The following example displays the range mode information:
ZXAN(config-if)#show gpon olt range-mode gpon-olt_0/9/1
OltInterface
range-mode
----------------------------gpon-olt_0/9/1 mode0
ZXAN(config-if)#
Note:
The modes are as follows:
Related
Commands
�
mode0: 0 – 20 km
�
mode1: 20 – 40 km
�
mode2: 40 – 60 km
None
GPON ONU Basic
Management Commands
interface gpon-onu
Syntax
Purpose
Usage Guidelines
Mode
Example
interface gpon-onu_shelf/card/oltId:onuid
To enter into the GPON ONU interface mode
Parameter
Description
Value
gpon-onu_shelf/card/
oltId:onuid
GPON card shelf
number, slot number,
OLT ID and ONU ID
Range: 1 – 64
characters
ZXAN(config)#
The following example displays how to enter into the GPON ONU
interface mode:
105
ZXAN(config-if)#
Related
Commands
Related
Information
None
ONU must be registered in GPON under OLT.
interface
Syntax
Purpose
Usage Guidelines
Mode
Example
interface gpon-virtual-onu_name
To enter into GPON virtual ONU interface mode
Parameter
Description
Value
gpon-virtual-onu_n
ame
Range: 1 – 31
characters
ZXAN(config)#
The following example displays how to enter into GPON virtual ONU
interface mode:
ZXAN(config)#interface gpon-virtual-onu_F621
ZXAN(config-if)#
Related
Commands
Related
Information
None
Before executing the command, the virtual ONU must be registered in GPON interface mode.
action
Syntax
Purpose
Usage Guidelines
Mode
Example
action {reboot | restore | synctime | test}
To apply an action on the ONU
Parameter
Description
Value
reboot
Reboot
–
restore
Restore
–
synctime
Synchronize time
–
test
Test
–
ZXAN(gpon-onu-mng)#
The following example displays how to apply an action on the ONU:
ZXAN(config)#pon-onu-mng gpon-onu_0/9/1:1
ZXAN(gpon-onu-mng)#action reboot
106
Chapter 5 GPON
ZXAN(gpon-onu-mng)#action restore
ZXAN(gpon-onu-mng)#action synctime
ZXAN(gpon-onu-mng)#action test
ZXAN(gpon-onu-mng)#
Related
Commands
None
description
Syntax
description description
no description
Purpose
Usage Guidelines
Mode
Example
To give description to an ONU interface
Parameter
Description
Value
description
Description
Range: 1 – 127
characters
ZXAN(config-if)#
The following example displays how to give description to an ONU
interface:
ZXAN(config-if)#description zteonu
ZXAN(config-if)#
Related
Commands
None
dhcp-option82 trust
Syntax
Purpose
Usage Guidelines
Mode
Example
dhcp-option82 trust {keep | replace} vport vport
To configure the port as trust port
Parameter
Description
Value
keep
Keep Option82 or
Option128 of DHCP
packet
-
replace
Replace Option82 or
Option128 of DHCP
packet
-
vport
GEM port number
Range: 1 – 255
ZXAN(config-if)#
The following example displays how to configure the port as trust
port:
107
ZXAN(config-if)# dhcp-option82 trust true keep vport 1
Related
Commands
show dhcp-option82
gemport
Syntax
To create a GEM port: gemport {gemport-index name name [por
tid portid] unicast tcont tcontindex [cos cos-value] [dir directi
on] [downtraffic downtraffic-profilename]
To configure the GEM port dot1p priority regeneration: priority-r
egeneration gemport-index originalpriority regenpriority
To configure the GEM port dot1p priority regeneration mode:
gemport priority-regeneration mode gemport-index {both |
cvlan | svlan}
no gemport {port-index | priority-regeneration {gemport-in
dex | mode gemport-index}
Purpose
Usage Guidelines
108
To configure the GEM port parameters
Parameter
Description
Value
gemport-index
GEM port index
Range: 1 – 255
name name
GEM port
Range: 1 – 64
characters
portid portid
Port ID
Range: 65 – 1023
unicast
Unicast
-
tcont tcontindex
TCONT index
Range: 1 – 255
cos cos-value
CoS value
Range: 0 – 3
dir direction
Direction (both, up or
down)
-
downtraffic downtra
ffic-profilename
Download traffic
profile name
Range: 1 – 63
characters
priority-regenerat
ion
Priority regeneration
parameters
-
gemport-index
GEM port index
Range: 1 – 255
originalpriority
Original priority
Range: 0 – 7
regenpriority
Regeneration priority
Range: 0 – 7
mode
Mode
-
gemport-index
GEM port index
Range: 1 – 255
both
Both modes
-
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
cvlan
CVLAN
-
svlan
SVLAN
-
ZXAN(config-if)#
The following example displays how to configure the GEM port parameters:
ZXAN(config-if)#gemport 1 name gm unicast tcont 1
ZXAN(config-if)#gemport 1 name gem unicast tcont 1
cos 1
dir both
dir down
dir up
downtraffic df
ZXAN(config-if)#gemport priority-regeneration 1 7 5
ZXAN(config-if)#gemport priority-regeneration mode 1
both
cvlan
svlan
ZXAN#(config-if)#
Related
Commands
Related
Information
None
Before executing this command, following parameters must be
configured:
�
GPON bandwidth attribute
�
TCONT
gemport-weight-mgmt
Syntax
Purpose
Usage Guidelines
gemport-weight-mgmt portid [cos weight] [schedulemode
mode]
To configure the GEM port weight management parameters
Parameter
Description
Value
portiId
GEM port weight
management port ID
Range: 1 – 255
cos
GEM port weight
management CoS
value
cos1, cos2, cos3, cos4
weight
Weight value
Range: 0 – 100
schedulemode mode
Schedule mode
SP, WRR
109
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the GEM port
weight management parameters:
ZXAN(config-if)#gemport-weight-mgmt 1
ZXAN(config-if)#gemport-weight-mgmt 1 cos1 1
ZXAN(config-if)#gemport-weight-mgmt 1 cos4 10
ZXAN(config-if)#gemport-weight-mgmt 1 schedulemode sp
ZXAN(config-if)#gemport-weight-mgmt 1 schedulemode wrr
ZXAN(config-if)#
Related
Commands
Related
Information
None
�
Create T-CONT profile before configuring this command.
�
When system is in SP mode, four GEM ports are scheduled
according to SP arithmetic. CoS 1 – CoS 4 are ineffective.
�
When system is in WRR mode, four GEM ports are scheduled
according to WRR arithmetic. CoS 1 – CoS 4 represents the
weight of four queues.
�
When scheduling is not used, the system does not perform
scheduling between GEM ports and only supports GEM ports
internal scheduling instead.
�
Default values for CoS 1, CoS 2, CoS 3, CoS 4 are 10, 20, 30
and 40 respectively.
max-mac-learn
Syntax
max-mac-learn num [vport vportno]
no max-mac-learn num [vport vportno]
Purpose
Usage Guidelines
Mode
Example
To configure MAC address learning limit
Parameter
Description
Value
num
MAC address learning
number
-
vport vportno
Port number
Range: 1 – 256
ZXAN(config-if)#
The following example displays how to configure MAC address
learning limit:
ZXAN(config-if)#max-mac-learn 200 pvc 2
110
Chapter 5 GPON
Related
Commands
None
gemport priority-regeneration
Syntax
gemport priority-regeneration portIndex original-priority rege
nerated-priority
no gemport priority-regeneration portIndex
Purpose
Usage Guidelines
Mode
Example
To configure the mapping relationship between priorities
Parameter
Description
Value
portIndex
GEM port number
Range: 1 – 255
original-priority
Original priority
Range; 0 – 7
regenerated-priority
Regenerated priority
Range: 0 – 7
ZXAN(config-if)#
The following example displays how to configure the mapping relations between priorities:
ZXAN(config-if)#gemport priority-regeneration 1 0 1
Related
Commands
Related
Information
None
Execute the no form of this command to delete the configuration.
gemport priority-regeneration mode
Syntax
gemport priority-regeneration mode portIndex {svlan |
cvlan | both}
no gemport priority-regeneration mode portIndex
Purpose
Usage Guidelines
To configure the port priority regeneration mode
Parameter
Description
Value
portIndex
GEM port number
Range: 1 – 255
svlan
Modify SVLAN priority
only
-
cvlan
Modify CVLAN priority
only
-
both
Modify both SVLAN
and CVLAN priority
-
111
Mode
Example
ZXAN(config-if)#
The following example displays how to configure port priority regeneration mode:
ZXAN(config-if)#gemport priority-regeneration mode 1 both
Related
Commands
Related
Information
None
By default, port priority regeneration mode is SVLAN.
name
Syntax
name onuname
no name
Purpose
Usage Guidelines
Mode
Example
To name an ONU
Parameter
Description
Value
onuname
ONU name
Range: 1 – 127
characters
ZXAN(config-if)#
The following example displays how to name an ONU:
ZXAN(config-if)#name zteonu
ZXAN(config-if)#
Related
Commands
None
onu-state
Syntax
Purpose
Usage Guidelines
Mode
Example
onu-state {deactive | ready}
To configure the state of an ONU
Parameter
Description
Value
deactive
Disable the ONU state
-
ready
OMCC is normal
-
ZXAN(config-if)#
The following example displays how to configure the state of an
ONU:
112
Chapter 5 GPON
ZXAN(config-if)#onu-state deactive
ZXAN(config-if)#onu-state ready
ZXAN(config-if)#
Related
Commands
None
portid-encrypt
Syntax
Purpose
Usage Guidelines
Mode
Example
portid-encrypt port-index {disable | enable}
To encrypt the status of an ONU GEM port
Parameter
Description
Value
port-index
Port index
Range: 1 – 255
disable
Disable port
encryption
-
enable
Enable port
encryption
-
ZXAN(config-if)#
The following example displays how to encrypt the status of an
ONU GEM port:
ZXAN(config-if)#portid-encrypt 1 disable
ZXAN(config-if)#portid-encrypt 1 enable
ZXAN(config-if)#
Related
Commands
None
port-location format
Syntax
port-location format {{china-telecom | dsl-forum} | sub-op
tion remote-id {disable | enable | name name}} {vport vpor
t-index}
no port-location sub-option remote-id name vport vport-in
dex
Purpose
Usage Guidelines
To configure port-location format
Parameter
Description
Value
format
Port location format
-
china-telecom
Use China Telecom as
format
-
113
Mode
Example
Parameter
Description
Value
dsl-forum
Use DSL forum as
format
-
sub-option
Port location
sub-option
-
remote-id
Configure remote ID
-
disable
Set disable
-
enable
Set enable
-
name name
Set remote ID name
Range: 1 – 64
characters
vport vport-index
Specify Virtual port
index
Range: 1 – 255
ZXAN(config-if)#
The following example displays how to configure port-location format:
ZXAN(config-if)#port-location format china-telecom
vport 1
ZXAN(config-if)#port-location format dsl-forum vport
1
ZXAN(config-if)#port-location sub-option remote-id disable
vport 1
ZXAN(config-if)#port-location sub-option remote-id enable
vport 1
ZXAN(config-if)#port-location sub-option remote-id name
remote1 vport 1
ZXAN(config-if)#
Related
Commands
None
pppoe-plus
Syntax
Purpose
Usage Guidelines
Mode
114
pppoe-plus {disable | enable} {vport vport-index}
To enable/disable PPPoE+ port
Parameter
Description
Value
disable
Disable PPPoE+
-
enable
Enable PPPoE+
-
vport vport-index
Specify virtual port
index
Range: 1 – 255
ZXAN(config-if)#
Chapter 5 GPON
Example
The following example displays how to enable/disable PPPoE+
port:
ZXAN(config-if)#pppoe-plus disable vport 1
ZXAN(config-if)#pppoe-plus enable vport 1
ZXAN(config-if)#
Related
Commands
None
pwmode
Syntax
Purpose
Usage Guidelines
Mode
Example
pwmode {force | none} [password password]
To specify the sequence number and password
Parameter
Description
Value
force
Force PW mode
-
none
No password
-
password password
Password
Range: 1 – 10
characters
ZXAN(config-if)#
The following example displays how to specify the sequence number and password:
ZXAN(config)#interface
ZXAN(config-if)#pwmode
ZXAN(config-if)#
Related
Commands
gpon-onu_0/9/1:1
force
force password 123
none
none password 123
None
qos-mgmt
Syntax
Purpose
Usage Guidelines
qos-mgmt [cos weight] [downtraffic profile-name] [schedule
mode mode]
To configure the QoS management parameters
Parameter
Description
Value
cos
QoS management
value
cos1, cos2, cos3, cos4
weight
CoS weight value
Range: 0 – 100
115
Mode
Example
Parameter
Description
Value
downtraffic
profile-name
Download traffic
profile name
Range: 1 – 127
characters
schedulemode mode
Schedule mode
None, SP, WRR
ZXAN(config-if)#
The following example displays how to configure the QoS management parameters:
ZXAN(config-if)#qos-mgmt
ZXAN(config-if)#qos-mgmt cos1 10
ZXAN(config-if)#qos-mgmt cos4 10
ZXAN(config-if)#qos-mgmt downtraffic traficprofile
ZXAN(config-if)#qos-mgmt schedulemode none
ZXAN(config-if)#qos-mgmt schedulemode sp
ZXAN(config-if)#qos-mgmt schedulemode wrr
ZXAN(config-if)#
Related
Commands
Related
Information
None
�
Create T-CONT profile before configuring this command.
�
When system is in SP mode, four GEM ports are scheduled
according to SP arithmetic. CoS 1 – CoS 4 are ineffective.
�
When system is in WRR mode, four GEM ports are scheduled
according to WRR arithmetic. CoS 1 – CoS 4 represent the
weight of four queues.
�
When scheduling is not used, the system does not perform
scheduling between GEM ports and only supports GEM ports
internal scheduling instead.
�
Default values for CoS 1, CoS 2, CoS 3, CoS 4 are 10, 20, 30
and 40 respectively.
range
Syntax
Purpose
Usage Guidelines
Mode
Example
range
To display port list of the specified range
None
ZXAN(config-if)#
The following example displays port list of the specified range:
Portlist of the range: gpon-onu_0/9/1:1
ZXAN(config-if)#
116
Chapter 5 GPON
Related
Commands
None
sn
Syntax
Purpose
Usage Guidelines
Mode
Example
sn vendor-id serial-number
To configure the serial number
Parameter
Description
Value
vendor-id
Vendor ID
Range: 1 – 4
characters
serial-number
Second part of
the serial number
(0xXXXXXXXX)
-
ZXAN(config-if)#
The following example displays how to configure the serial number:
ZXAN(config-if)#sn ZTE 0x91000048
ZXAN(config-if)#
Related
Commands
None
tcont
Syntax
tcont tcont-index {allocid allocid | name name | traffic traffic}
no tcont tcont-index
Purpose
Usage Guidelines
Mode
Example
To configure the traffic management unit
Parameter
Description
Value
tcont-index
TCONT index
Range: 1 – 255
allocid allocid
Allocation ID
Range: 256 – 4095
name name
Traffic management
unit name
Range: 1 – 63
characters
traffic traffic
Bandwidth profile
name used by TCONT
Range: 1 – 63
characters
ZXAN(config-if)#
The following example displays how to configure the traffic management unit:
117
ZXAN(config-if)#tcont 1 allocid 100
ZXAN(config-if)#tcont 1 name tf traffic tf
ZXAN(config-if)#
Related
Commands
None
type-name
Syntax
type-name name
no type-name
Purpose
Usage Guidelines
Mode
Example
To assign a name to ONU
Parameter
Description
Value
name
Type name
Range: 1 – 63
characters
ZXAN(config-if)#
The following example displays how to assign a name to ONU:
ZXAN(config-if)#type-name onuname
ZXAN(config-if)#
Related
Commands
None
shutdown
Syntax
shutdown
no shutdown
Purpose
Usage Guidelines
Mode
Example
To administratively shutdown a GPON ONU interface
None
ZXAN(config-if)#
The following example displays how to administratively shutdown
a GPON ONU interface:
ZXAN(config-if)#gpon-onu_0/9/1:1
ZXAN(config-if)#shutdown
ZXAN(config-if)#
118
Chapter 5 GPON
Related
Commands
None
vlan-xconnect
Syntax
vlan-xconnect vport vportid cvlan cvlanid svlan svlanid uplink
interface [newcvlan newcvlanid | newsvlan newsvlanid]
no vlan-xconnect vport vportid cvlan cvlanid svlan svlanid
uplink interface [newcvlan newcvlanid | newsvlan newsvlanid]
Purpose
Usage Guidelines
Mode
Example
To configure 1:1 VLAN rule and specify CVLAN, SVLAN and uplink
interface
Parameter
Description
Value
vport vportid
Vport ID
Range: 1 – 256
cvlan cvlanid
CVLAN ID
Range: 1 – 4093
svlan svlanid
SVLAN ID
Range: 1 – 4093
uplink interface
Interface name
-
newcvlan newcvlanid
New CVLAN ID
Range: 1 – 4093
newsvlan newsvlanid
New SVLAN ID
Range: 1 – 4093
ZXAN(config-if)#
The following example displays how to configure 1:1 VLAN rule
and specify CVLAN, SVLAN and uplink interface:
ZXAN(config)# interface gpon-onu_0/3/1:1
ZXAN(config-if)vlan-xconnect vport 1 cvlan 20 uplink
gei_0/6/1 newcvlan 30 newsvlan 450
Related
Commands
None
show allocid
Syntax
Purpose
Usage Guidelines
show allocid gpon-olt_shelf/slot/oltId onu-id {tcont-id}
To display ONU TCONT allocation ID data
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 128
tcont-id
Allocation ID
Range: 1 – 255
119
Mode
Example
The following example displays the ONU TCONT allocation ID data:
ZXAN(config-if)#show allocid gpon-olt_0/9/1 1 1
allocId: 256
ZXAN(config-if)#
Related
Commands
None
show gpon onu gemport
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu state gpon-olt_shelf/slot/oltId [onu-id]
To display the ONU interface configuration information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 164
The following example displays the ONU interface configuration
information:
ZXAN(config-if)#show onu state gpon-olt_0/4/1
OnuIndex
Admin State Omcc State O7 State Phase State
----------------------------------------------------------------gpon-onu_0/4/1:1 enable
disable
unknown
OffLine
ZXAN(config-if)#
Related
Commands
None
priority-regeneration configuration
Syntax
Purpose
Usage Guidelines
120
show gpon onu gemport priority-regeneration configurat
ion gpon-olt_shelf/slot/oltId [onuId [gemportId]
To query the GEM port priority regeneration configuration
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
onuId
ONU ID
Range: 1 – 128
gemportId
GEM port ID
Range: 1 – 256
The following example displays how to query the GEM Port priority
regeneration configuration:
ZXAN(config)#show gpon onu gemport priority-regeneration
configuration gpon-olt_0/3/1
OLT: gpon-olt_0/3/1.
ONU: 1. GemPort: 1.
Original priority: 0.Regenerated priority: 0.
1.
1.
2.
2.
3.
3.
4.
4.
5.
5.
6.
6.
7.
7.
Mode:svlan.
Related
Commands
None
show gpon onu baseinfo
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu baseinfo gpon-olt_shelf/slot/oltId [onu-id]
To display the ONU base information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 164
The following example displays the ONU base information:
ZXAN(config-if)#show onu baseInfo gpon-olt_0/9/1
OnuIndex
Name
TypeName
Descr
Sn
PwMode State
------------------------------------------------------------gpon-onu_0/9 ONU-1:1
universal
ONU-1:1
ZTE
none
ready
/1:1
OnuType
gpon-onu_0/9 ONU-1:2
universal
ONU-1:2
zte
none
ready
/1:2
OnuType
ZXAN(config-if)#
121
Related
Commands
None
show gpon onu detail-info
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu detail-info gpon-onu_shelf/slot/olt:onu
To display detailed configuration information related to GPON ONU
Parameter
Description
Value
olt:onu
OLT shelf number, slot
number, port number
and ONU number
Range: 1 – 31
The following example displays detailed configuration information
related to GPON ONU:
ZXAN(config)#show gpon
ONU interface:
Name:
Type:
State:
Authentication mode:
Serial number:
Password mode:
Password:
Device ID:
Description:
Version update mode:
Related
Commands
onu detail-info gpon-onu_0/3/1:1
gpon-onu_0/3/1:1
aa
ZTE-F621
ready
SN
ZTEG00000001
none
ONU-1:1
manual
None
show gpon onu gemport statistic
Syntax
Purpose
Usage Guidelines
Mode
122
show gpon onu gemport statistic gpon-olt_shelf/slot/oltId
[onuId [gemportId]]
To query the OLT GEM port performance statistics information
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
onuId
ONU ID
Range: 1 – 128
gemportId
GEM port ID
Range: 1 – 256
Chapter 5 GPON
Example
The following example displays how to query OLT GEM port performance statistic information:
ZXAN(config)#show gpon onu gemport statistic gpon-olt_0/3/1
ONU id
Input:
Unicasts
Broadcasts
Dropped
Output:
Unicasts
Broadcasts
Dropped
Related
Commands
:1
GEM port
:0
:0
:0
Multicasts: 0
:0
:0
:0
Multicasts: 0
Passed :
Passed :
: 1
0
0
None
show gpon onu state
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu state gpon-olt_shelf/slot/oltId [onu-id]
To display the ONU interface configuration information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 164
The following example displays the ONU interface configuration
information:
ZXAN(config-if)#show onu state gpon-olt_0/4/1
OnuIndex
Admin State Omcc State
O7 State Phase State
-----------------------------------------------------------------gpon-onu_0/4/1:1
enable
disable
unknown
OffLine
ZXAN(config-if)#
Related
Commands
None
show gpon onu uncfg
Syntax
show gpon onu uncfg gpon-olt_shelf/slot/oltId [onu-id]
Purpose
To display the GPON ONU unauthorized information
Usage Guidelines
123
Mode
Example
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 64
The following example displays the GPON ONU unauthorized information:
ZXAN(config-if)#show onu uncfg gpon-olt_0/4/1
OnuIndex
Sn
State
-------------------------------------gpon-onu_0/4 ZTE_--0x00150150 unknow
/1:0
ZXAN(config-if)#
Related
Commands
None
show gpon onu weightmgmt
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu weightmgmt gpon-olt_shelf/slot/oltId [onu-id]
To display the ONU weight management information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 64
The following example displays the ONU weight management information:
ZXAN(config-if)#show onu weightmgmt
gpon-olt_0/9/1 1
OnuIndex
Schdulemode Cos1 Cos2 Cos3 Cos4 TrafficProfileName
--------------------------------------------------------------------gpon-onu_0/9/1: none
10
20
30
40
default
1
ZXAN(config-if)#
124
Chapter 5 GPON
Related
Commands
None
show performance onu
Syntax
Purpose
Usage Guidelines
Mode
Example
show performance onu {current | history} [ gpon-olt_shelf/s
lot/oltId] [onu-id]
To display the ONU current and history performance information
Parameter
Description
Value
current
Current performance
information
-
history
History information
-
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 128
The following example displays the ONU current and history performance information:
ZXAN(config-if)#show performance onu history
gpon-olt_0/9/1
ZXAN(config-if)#
Related
Commands
None
show gpon onu tcont
Syntax
Purpose
Usage Guidelines
Mode
show gpon onu tcont gpon-olt_shelf/slot/oltId [onuid [tcontid]]
To display ONU TCONT configuration information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID and ONU
ID
Range: 1 –19
characters
onuid
ONU ID
Range: 1 – 128
tcontid
TCONT ID
Range: 1 – 255
125
Example
The following example displays ONU TCONT configuration information:
ZXAN(config)#show gpon onu tcont gpon-olt_0/3/1
Name: tcont1, OLT: gpon-olt_0/3/1,
ONU: 1, TCONT: 1
AllocId: 256
Using following bandwidth profile:
Tcont Profile Name: default
Related
Commands
None
show gpon onu update-status
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon onu update-status gpon-olt_shelf/slot/oltId [onuid]
To display ONU version update status information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onuid
ONU ID
Range: 1 – 128
The following example displays ONU version update status information:
ZXAN(config-if)#show gpon onu update-status gpon-olt_0/3/1
ONU if name: gpon-onu_0/3/1:1
Update status:
done
Percent:
100%
Current version: GPON
Version time: 2008-12-23 12:56:51
Update version:
Version time:
Abort reason:
none
Related
Commands
None
show gpon onu version-running
Syntax
Purpose
Usage Guidelines
126
show gpon onu version-running gpon-onu_shelf/slot/olt:onu
[onu-slot slotnum]
To display ONU running version information
Parameter
Description
Value
olt:onu
GPON card shelf
number, slot number
and OLT ID and ONU
ID
Range: 1 – 31
characters
onu-slot slotNum
ONU slot number
Range: 1 – 255
Chapter 5 GPON
Mode
Example
The following example displays ONU running version information:
ZXAN(config-gpon)#show gpon onu version-running gpon-onu_0/3/1:1
ONU slot/Region Version name
Active
Commmit
Valid
-------------------------------------------------------0/0
R1.4.6.22
false
false
true
0/1
R1.4.6.22
true
true
true
Related
Information
None
show portid
Syntax
Purpose
Usage Guidelines
Mode
Example
show portid gpon-olt_shelf/slot/oltId onu-id gemport-id
To display ONU port ID information
Parameter
Description
Value
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 128
gemport-id
GEM port ID
Range: 1 – 255
The following example displays the ONU port ID information:
ZXAN(config-if)#show portid gpon-olt_0/9/1 1 1
realPortId: 65
ZXAN(config-if)#
Related
Commands
None
GPON ONU Remote
Management Commands
pon-onu-mng
Syntax
Purpose
Usage Guidelines
pon-onu-mng gpon-onu_shelf/slot/oltId:onuid
To enter into the PON ONU management configuration mode
127
Mode
Example
Parameter
Description
Value
oltId:onuid
GPON card shelf
number, slot number
and OLT ID and ONU
ID
Range: 0 – 32
characters
ZXAN(config)#
The following example displays how to enter into the PON ONU
management configuration mode:
ZXAN(gpon-onu-mng)#
Related
Commands
None
pon-onu-mng
Syntax
Purpose
Usage Guidelines
Mode
Example
pon-onu-mng gpon-virtual-onu_name
To enter into GPON virtual ONU remote management interface
mode
Parameter
Description
Value
gpon-virtual-onu_n
ame
Range: 1 – 31
characters
ZXAN(config)#
The following example displays how to enter into GPON virtual ONU
remote management interface mode:
ZXAN(config)#pon-onu-mng gpon-virtual-onu_F621
ZXAN(gpon-onu-mng)#
Related
Commands
Related
Information
None
Before using this command, register this virtual ONU in GPON interface mode.
action
Syntax
Purpose
Usage Guidelines
128
action {reboot | restore | synctime | test}
To apply an action on the ONU
Parameter
Description
Value
reboot
Reboot
–
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
restore
Restore
–
synctime
Synchronize time
–
test
Test
–
ZXAN(gpon-onu-mng)#
The following example displays how to apply an action on the ONU:
ZXAN(gpon-onu-mng)#action reboot
ZXAN(gpon-onu-mng)#action restore
ZXAN(gpon-onu-mng)#action synctime
ZXAN(gpon-onu-mng)#action test
ZXAN(gpon-onu-mng)#
Related
Commands
None
bridge
Syntax
Purpose
Usage Guidelines
bridge bridge_slotno/bridgeno {forward-delay delay-time}
{hello-time time} {max-age max-age} {priority priority}
{learn | port-bridge | stp | unknownMac-discard {false |
true}}
To configure the bridge
Parameter
Description
Value
bridge_slotno/bridg
eno
Bridge slot and
number
Range: 0 – 31
characters
forward-delay
delay-time
Forward delay
Range: 4 – 30
seconds
hello-time time
Hello packet interval
Range: 1 – 10
seconds
learn
Learn MAC address
-
max-age max-age
Maximum age
Range: 6 – 40
port-bridge
Port bridge
-
priority priority
MAC bridge priority
Range: 0 - 65535
stp
STP arithmetic
-
unknownMac-disc
ard
Discard unknown MAC
-
129
Mode
Example
Parameter
Description
Value
false
Do not discard
unknown MAC
address
-
true
Discard unknown MAC
address
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the bridge:
ZXAN(gpon-onu-mng)#bridge bridge_4/1 forward-delay 10
ZXAN(gpon-onu-mng)#bridge bridge_4/1 hello-time 10
ZXAN(gpon-onu-mng)#bridge bridge_4/1 learn false
ZXAN(gpon-onu-mng)#bridge bridge_4/1 learn true
ZXAN(gpon-onu-mng)#bridge bridge_4/1 max-age 10
ZXAN(gpon-onu-mng)#bridge bridge_4/1 port-bridge false
ZXAN(gpon-onu-mng)#bridge bridge_4/1 port-bridge true
ZXAN(gpon-onu-mng)#bridge bridge_4/1 priority 10
ZXAN(gpon-onu-mng)#bridge bridge_4/1 stp false
ZXAN(gpon-onu-mng)#bridge bridge_4/1 stp true
ZXAN(gpon-onu-mng)#bridge bridge_4/1 unknownMac-discard
false
ZXAN(gpon-onu-mng)#bridge bridge_4/1 unknownMac-discard
true
ZXAN(gpon-onu-mng)#
Related
Commands
Related
Information
None
Before configuring MAC bridge, execute the interwork gemport
bridge command to create bridge mode connection between UNI
and GEM port; or execute the interwork gemport dot1p-bridge
command to create 802.1p+ bridge mode connection.
bridge-port uni-bind
Syntax
bridge-port uni-bind eth_slotno/port bridge_slotno/bridge-port
no bridge-port uni-bind
Purpose
Usage Guidelines
Mode
Example
To bind UNI to a specific bridge
Parameter
Description
Value
eth_slotno/port
Ethernet port number
Range: 1 – 31
characters
bridge_slotno/bridge
-port
Bridge port number
Range: 1 – 31
characters
ZXAN(gpon-onu-mng)#
The following example displays how to bind UNI to a specific
bridge:
ZXAN(gpon-onu-mng)#bridge-port uni-bind eth_12/1 bridge_0/1/1
130
Chapter 5 GPON
Related
Commands
None
bridge-port host-bind
Syntax
bridge-port host-bind hostid bridge_slotno/bridge-port
no bridge-port host-bind hostid
Purpose
Usage Guidelines
Mode
Example
To bind IP host to a specific bridge
Parameter
Description
Value
hostid
Host ID
Range: 0 – 255
-port
Bridge port ID
Range: 1 – 31
characters
ZXAN(gpon-onu-mng)#
The following example displays how to bind IP host to a specific
bridge:
Related
Commands
None
bridge-port uni
Syntax
Purpose
Usage Guidelines
bridge-port uni eth_slotno/port {encap-method {atmvc |
llc}} {lan-fcs {forward | discard}} {path-cost path-cost}
{priority priority} {stp {true | false}}
To configure UNI-side bridge port property
Parameter
Description
Value
eth_slotno/port
Range: 1 – 31
characters
encap-method
{atmvc | llc}
Encapsulation mode
-
lan-fcs {forward |
discard}
Local network
-
path-cost path-cost
Path cost
Range: 0 – 65,535
priority priority
Priority
Range: 0 – 65,535
stp {true | false}
Spanning tree
-
131
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure UNI-side bridge
port property:
Related
Commands
None
bridge-port ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
bridge-port ip-host hostid {encap-method {atmvc | llc}}
{lan-fcs {forward | discard}} {path-cost path-cost} {priority
priority} {stp {true | false}}
To configure bridge port property at IP host side
Parameter
Description
Value
hostid
Host ID
Range: 1 – 255
encap-method
{atmvc | llc}
Encapsulation mode
-
lan-fcs {forward |
discard}
Local network
-
path-cost path-cost
Path cost
Range: 0 – 65,535
priority priority
Priority
Range: 0 – 65,535
stp {true | false}
Spanning tree
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure bridge port property at IP host side:
ZXAN(gpon-onu-mng)#bridge-port ip-host 1 encap-method atmvc
Related
Commands
None
bridge-port uni traffic-limit
Syntax
bridge-port uni eth_slotno/port traffic-limit {[in profile-name]
| [out profile-name]}
no bridge-port uni eth_slot/port traffic-limit {in | out | all}
Purpose
Usage Guidelines
132
To configure bridge port traffic limit at UNI side
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
eth_slotno/port
Ethernet port ID, slot
number, port ID
Range: 1 – 31
characters
in profile-name
Ingress traffic profile
name
Range: 1 – 63
out profile-name
Egress traffic profile
name
Range: 1 – 63
traffic-limit
Traffic limit
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure bridge port traffic
limit at UNI side:
ZXAN(config)#gpon
ZXAN(config-gpon)#traffic-profile in-traffic sir 10000 pir 20000
ZXAN(config-gpon)#traffic-profile out-traffic sir 10000 pir 20000
ZXAN(config-gpon)#exit
ZXAN(gpon-onu-mng)#bridge-port uni eth_0/1 traffic-limit in
in-traffic out out-traffic
ZXAN(gpon-onu-mng)#no bridge-port uni eth_0/1 traffic-limit all
Related
Commands
Related
Information
None
Before using this command, configure the traffic profile.
bridge-port uplink
Syntax
Purpose
Usage Guidelines
Mode
bridge-port uplink uplink_slotno/bridge/port {encap-method
{atmvc | llc}} {lan-fcs {forward | discard}} {path-cost path
-cost} {priority priority} {stp {true | false}}
To configure uplink-interface-side bridge port property
Parameter
Description
Value
uplink_slotno/bridge/
port
Uplink port number
Range: 1 – 31
characters
encap-method
{atmvc | llc}
Encapsulation mode
-
lan-fcs {forward |
discard}
Local network
-
path-cost path-cost
Path cost
Range: 0 – 65,535
priority priority
Priority
Range: 0 – 65,535
stp {true | false}
Spanning tree
-
ZXAN(gpon-onu-mng)#
133
Example
The following example displays how to configure uplink-interfaceside bridge port property:
ZXAN(gpon-onu-mng)#bridge-port uplink uplink_0/10/1 stp true
Related
Commands
None
device admin-state
Syntax
Purpose
Usage Guidelines
Mode
Example
device admin-state {unlock | lock}
To configure ONT device administration mode
Parameter
Description
Value
unlock
Unlock mode
-
lock
Lock mode
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure ONT device administration mode:
ZXAN(gpon-onu-mng)#device admin-state lock
Related
Commands
None
device battery-backup
Syntax
device battery-backup {true | false}
Purpose
To enable/disable the battery backup for ONT device
Usage Guidelines
The following table provides parameter descriptions:
Mode
Example
Parameter
Description
Value
true
Enable battery backup
-
false
Disable battery
backup
-
ZXAN(gpon-onu-mng)#
The following example displays how to enable/disable battery
backup for ONT device:
ZXAN(gpon-onu-mng)# device battery-backup true
134
Chapter 5 GPON
Related
Commands
None
device sec-mode
Syntax
Purpose
Usage Guidelines
Mode
Example
device sec-mode {aes | null}
To configure safe mode for ONT device
Parameter
Description
Value
aes
AES mode
-
null
No encryption
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure safe mode for
ONT device:
ZXAN(gpon-onu-mng)#device sec-mode aes
Related
Commands
Related
Information
None
By default, the safe mode is AES.
dot1x
Syntax
dot1x [cid-prefix nasportid-prefix] [fallback {deny | allow}]
[auth-server1
first-radius-authserver]
[shared-secret1
secret-of-first-authserver]
[auth-server2
second-radius-a
uthserver]
[shared-secret2
secret-of-second-authserver]
[auth-server3
third-radius-authserver]
[shared-secret3
secret-of-third-authserver] [proxy radius-proxy-ip]
no dot1x {cid-prefix | auth-server1 | shared-secret1 | auth
-server2 | shared-secret2 | auth-server3 | shared-secret3 |
proxy}
Purpose
Usage Guidelines
To configure ONU 802.1x attributes
Parameter
Description
Value
cid-prefix
nasportid-prefix
Circuit ID prefix
Range: 1 – 28
characters
fallback {deny |
allow}
Deny/allow 802.1x
conversation
-
auth-server1 first-ra
dius-authserver
First RADIUS
authentication server
URÌ address
Range: 1 – 128
characters
135
Mode
Example
Parameter
Description
Value
shared-secret1 secr
et-of-first-authserver
First RADIUS
shared secret
Range: 1 – 25
characters
auth-server2 secon
d-radius-authserver
Second RADIUS
URI address
Range: 1 – 128
characters
shared-secret2
secret-of-second-aut
hserver
Second RADIUS
shared secret
Range: 1 – 25
characters
auth-server3 third-r
adius-authserver
Third RADIUS
URI address
Range: 1 – 128
characters
shared-secret3 secr
et-of-third-authserver
Third RADIUS
shared secret
Range: 1 – 25
characters
proxy radius-proxy
-ip
802.1x RADIUS proxy
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure ONU 802.1x attributes:
ZXAN(gpon-onu-mng)#dot1x cid-prefix zte-gpon
auth-server1 10.63.196.254 shared-secret1 ztezte proxy 10.63.196.254
ZXAN(gpon-onu-mng)#no dot1x cid-prefix
Related
Commands
Related
Information
None
Use the no form of this command to delete the configuration.
dot1x ethuni
Syntax
dot1x ethuni eth_slot/port [auth {enable | disable}] [direct
ion {both | upstream}] [quiet-period seconds] [timeout-per
iod seconds] [key-tx {enable | disable}]
dot1x ethuni eth_slot/port force {reauth | unauth | auth}
Purpose
Usage Guidelines
136
To configure 802.1x attributes for Ethernet user port
Parameter
Description
Value
eth_slot/port
number and port ID
Range: 1 – 31
characters
auth {enable |
disable}
Enable/disable 802.1x
authentication
-
Chapter 5 GPON
Parameter
Description
Value
direction {both |
upstream}
802.1x authentication
direction:
-
�
Upstream
downstream
�
Upstream only
and
quiet-period
seconds
Time interval from
EAP request to time
that other end sends
identity invitation
Range: 0 – 65535 sec
timeout-period
seconds
Timeout period (time
that ONT waits for,
to get RADIUS server
response)
key-tx {enable |
disable}
Enable/disable key
-
force {reauth |
unauth | auth}
802.1x force
authentication:
-
Default: 30 sec
Force re-authentication
Authentication failure
Authentication
succeeds
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure 802.1x attributes
for Ethernet user port:
ZXAN(gpon-onu-mng)#dot1x ethuni eth_0/1 auth enable dierction upstream
ZXAN(gpon-onu-mng)#dot1x ethuni eth_0/1 force auth
Related
Commands
None
ex-vlan bridge-port uni
Syntax
ex-vlan bridge-port uni eth_slot/port [input-tpid 0xABCD-hex]
[output-tpid 0xABCD-hex] [down-mode {inverse-upstream |
no-operation}]
no ex-vlan bridge-port uni eth_slot/port
Purpose
Usage Guidelines
To create bridge port extension VLAN entity at UNI side
Parameter
Description
Value
eth_slot/port
number and port ID
Range: 1 – 31
characters
137
Mode
Example
Parameter
Description
Value
input-tpid
0xABCD-hex
Input TPID
Default: 0x8100
output-tpid
0xABCD-hex
Output TPID
Default: 0x8100
down-mode
{inverse-upstream
| no-operation}
Downstream frame
operation mode:
Default: inverse
upstream
�
Inverse upstream
�
No operation
ZXAN(gpon-onu-mng)#
The following example displays how to create bridge port extension
VLAN entity at UNI side:
ZXAN(gpon-onu-mng)#ex-vlan bridge-port uni eth_0/1 input-tpid
0x9100 output-tpid 0x8a88 down-mode inverse-upstream
Related
Commands
None
ex-vlan bridge-port uplink
Syntax
ex-vlan bridge-port uplink uplink_slot/bridge/port [input-tpid
0xABCD-hex] [output-tpid 0xABCD—hex] [down-mode {inver
se-upstream | no-operation}]
no ex-vlan bridge-port uplink uplink_slot/bridge/port
Purpose
Usage Guidelines
Mode
138
To create extension VLAN entity on uplink interface (bridge port at
ANI side)
Parameter
Description
Value
uplink_slot/bridge/p
ort
Uplink port ID, slot
number, bridge
IDbridge port ID
Range: 1 – 31
characters
input-tpid
0xABCD-hex
Input TPID
Default: 0x8100
output-tpid
0xABCD—hex
Output TPID
Default: 0x8100
down-mode
{inverse-upstream
| no-operation}
Downstream frame
operation mode:
-
�
Inverse upstream
(default)
�
No operation
ZXAN(gpon-onu-mng)#
Chapter 5 GPON
Example
The following example displays how to create extension VLAN entity on uplink interface (bridge port at ANI side):
ZXAN(gpon-onu-mng)#ex-vlan bridge-port uplink uplink_0/1/1
input-tpid 0x9100 output-tpid 0x8a88 down-mode inverse-upstream
Related
Commands
None
ex-vlan eth
Syntax
ex-vlan eth eth_slot/port [input-tpid 0xabcd-hex] [output-tpid
0xabcd-hex] [down-mode { inverse-upstream | no-operatio
n}]
no ex-vlan eth eth_slot/port
Purpose
Usage Guidelines
Mode
Example
To create extension VLAN entity on ONU Ethernet port
Parameter
Description
Value
eth_slot/port
number and port ID
Range: 1 – 31
characters
input-tpid
0xabcd-hex
Input TPID
Default: 0x8100
output-tpid
0xabcd-hex
Output TPID
Default: 0x8100
down-mode {
inverse-upstream |
no-operation}
Downstream frame
operation mode:
-
�
Inverse upstream
(default)
�
No operation
ZXAN(gpon-onu-mng)#
The following example displays how to create extension VLAN entity on ONU Ethernet port:
ZXAN(gpon-onu-mng)#ex-vlan eth eth_0/1 input-tpid 0x8100
output-tpid 0x8a88 down-mode inverse-upstream
Related
Commands
None
ex-vlan-table bridge-port uni
Syntax
ex-vlan-table bridge-port uni eth_slot/port rule rule-name
treat treat-name
no ex-vlan-table bridge-port uni eth_slot/port rule rule-name
139
Purpose
Usage Guidelines
Mode
Example
To configure the extension VLAN parameters on UNI-side bridge
port
Parameter
Description
Value
eth_slot/port
number, port ID
Range: 1 – 31
characters
rule rule-name
Filter rule
-
treat treat-name
Treat name
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the extension
VLAN parameters on UNI-side bridge port:
ZXAN(config)#gpon
ZXAN(config-gpon)#filter-rule double-tag double-tag-rule1
inner-vid 100 outer-vid 200
ZXAN(gpon-onu-mng)#ex-vlan bridge-port uni eth_0/1
ZXAN(gpon-onu-mng)#ex-vlan-table bridge-port uni eth_0/1 rule double-tag-rule1 treat 1
Related
Commands
Relate
Information
None
Before extension VLAN parameter configuration, configure extension VLAN entity.
ex-vlan-table bridge-port uplink
Syntax
ex-vlan-table bridge-port uplink uplink_slot/bridge/port rule
rulename treat treatname
no ex-vlan-table bridge-port uplink uplink_slot/bridge/port
rule rulename
Purpose
Usage Guidelines
Mode
Example
To configure the extension VLAN parameters on uplink port
Parameter
Description
Value
ort
number, bridge
number, pot ID
Range: 1 – 31
characters
treat treatname
Treat
-
rule rulename
Filter rule
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the extension
VLAN parameters on uplink port:
ZXAN(config)#gpon
ZXAN(config-gpon)#filter-rule double-tag
140
Chapter 5 GPON
double-tag-rule1 inner-vid 100 outer-vid 200
ZXAN(gpon-onu-mng)#ex-vlan bridge-port uplink uplink_0/1/1
ZXAN(gpon-onu-mng)#ex-vlan-table bridge-port uplink
uplink_0/1/1 rule double-tag-rule1 treat 1
Relate Commands
Related
Information
None
Before extension VLAN configuration, configure extension VLAN
entity first.
ex-vlan-table eth
Syntax
ex-vlan-table eth eth_slot/port rule rule-name treat treat-n
ame
no ex-vlan-table eth eth_slot/port rule rule-name
Purpose
Usage Guidelines
Mode
Example
To configure extension VLAN table entries on ONU Ethernet port
Parameter
Description
Value
eth_slot/port
number and port ID
Range: 1 – 31
characters
rule rule-name
Filter rule
-
treat treat-name
Treat Ethernet
upstream frame that
matches filter rule
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure extension VLAN
table entries on ONU Ethernet port:
ZXAN(config)#gpon
ZXAN(config-gpon)#filter-rule double-tag
double-tag-rule1 inner-vid 100 outer-vid 200
ZXAN(gpon-onu-mng)#ex-vlan eth eth_0/1 input-tpid 0x9100
output-tpid 0x8a88 down-mode inverse-upstream
ZXAN(gpon-onu-mng)#ex-vlan-table eth eth_0/1
rule double-tag-rule1 treat 1
Related
Commands
Related
Information
None
Before configuring extension VLAN table entries, execute the ex-v
lan eth command to configure extension VLAN entity. Configure
extension VLAN filter rule and treat profile in GPON global configuration mode.
141
interface ces admin-state
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port admin-state {disable | enable}
To configure CES administration state on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
admin-state
Configure
administration state
-
disable
Disable port
administration
-
enable
Enable port
administration
-
ZXAN(gpon-onu-mng)#
The following example displays how to disable CES administration
state on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 admin-state disable
Related
Commands
None
interface ces arc
Syntax
Purpose
Usage Guidelines
interface ces ces_slot/port arc arc arc-interval arc-interval
To configure alarm report control on CES user port
Parameter
Description
Value
ces_slot/port
ONU CES port slot
numberport
Range: 1 – 31
characters
arc
Alarm report control
switch:
0 or 1
arc-interval
arc-interval
Mode
142
�
0: disable control
switch and allow
alarm report
�
1: enable control
switch and forbid
alarm report
interval
ZXAN(gpon-onu-mng)#
Range: 0 – 255
Chapter 5 GPON
Example
The following example displays how to configure alarm report control on CES user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 arc 1 arc-interval 10
Related
Commands
None
interface ces ds1-framing
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port ds1-framing {extendsuper | g704
| jtg704 | super | unframe}
To configure CES DS1 frame on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
extendsuper
Extended super frame
-
g704
G.704 code
-
jtg704
JT-G.704 code
-
super
Super frame
-
unframe
Unframe
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure CES DS1 frame
on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 ds1-framing super
Related
Commands
None
interface ces ds1-mode
Syntax
Purpose
Usage Guidelines
interface ces ces_slot/port ds1-mode {mode1 | mode2 |
mode3 | mode4}
To configure CES DS1 mode on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
143
Parameter
Description
Value
mode1
Mode 1:
-
mode2
mode3
mode4
Mode
Example
�
Connect:
CPE
�
Line length: Short
haul
�
Power: No power
feed
�
Loopback: Smart
jack
DS1
-
Mode 2:
�
Connect:
CPE
�
Line length: Long
haul
�
Power: No power
feed
�
Loopback: Smart
jack
DS1
-
Mode 3:
�
Connect:
NIU CPE
�
Line length: Long
haul
�
Power: No power
feed
�
Loopback: Intelligent office repeater
DS1
-
Mode 4:
�
Connect:
NIU CPE
�
Line length: Long
haul
�
Power:
power feed
�
Loopback: Intelligent office repeater
DS1
With
ZXAN(gpon-onu-mng)#
The following example displays how to configure CES DS1 mode
on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 ds1-mode mode1
144
Chapter 5 GPON
Related
Commands
None
interface ces expect-type
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port expect-type type
To configure CES line card type on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
expect-type type
Card type
Range: 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure CES line card type
on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 expect-type 0
Related
Commands
None
interface ces line-coding
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port 1ine-coding {ami | b3zs | b8zs |
hdb3}
To configure CES line coding format on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
ami
AMI coding format
-
b3zs
B3ZS coding format
-
b8zs
B8ZS coding format
-
hdb3
HDB3 coding format
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure CES line coding
format on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 line-coding ami
145
Related
Commands
None
interface ces line-length
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port 1ine-length length-value
To configure CES line length on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
1ine-length
length-value
Line length number
Range: 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure CES line length
on user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 line-length 0
Related
Commands
None
interface ces line-type
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port 1ine-type {3plcp | ds3cbitparity |
ds3clearchannel | ds3m23 | ds3syntran | e3framed | other}
To configure the CES user port line types
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port ID
Range: 1 – 31
characters
3plcp | ds3c
bitparity |
ds3clearchannel
| ds3m23 |
ds3syntran |
e3framed | other
Line types
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the CES user port
line types:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 line-type other
146
Chapter 5 GPON
Related
Commands
None
interface ces loopback
Syntax
Purpose
Usage Guidelines
Mode
Example
interface ces ces_slot/port 1oopback {lineloop | noloop | opsl
oop1 | opsloop2 | opsloop3 | payloadloop}
To configure loopback way on user port
Parameter
Description
Value
ces_slot/port
ONU CES port, slot
number, port
Range: 1 – 31
characters
lineloop
Line loop
-
noloop
No loop
-
opsloop1
Loop at PON side
-
opsloop2
Loop at CES UNI side
-
opsloop3
Loop at PON side and
CES UNI side
-
payloadloop
Payload loop
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure loopback way on
user port:
ZXAN(gpon-onu-mng)#interface ces ces_0/1 loopback opsloop1
Related
Commands
None
interface eth admin-state
Syntax
Purpose
Usage Guidelines
interface eth_slotno/port admin-state {lock | unlock}
To configure the GPON ONU interface admin state parameters
Parameter
Description
Value
eth_slotno/port
Ethernet slot number
and port number
Range : 1 – 31
characters
lock
Lock
-
unlock
Unlocked
-
147
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure the GPON ONU
interface admin state parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4
admin-state lock
ZXAN(gpon-onu-mng)#interface eth eth_5/4
admin-state unlock
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface eth arc
Syntax
Purpoose
Usage Guidelines
Purpose
Example
interface eth eth_slot/port arc arc arc-interval arc-interval
To configure the alarm report control on Ethernet port
Parameter
Description
Value
eth_slot/port
Ethernet port, slot
number, port ID
-
arc
switch
0, 1
arc-interval
arc-interval
Alarm report interval
Range: 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the alarm report
control on Ethernet port:
ZXAN(gpon-onu-mng)#interface eth eth_12/1 arc 1 arc-interval 10
Related
Commands
None
interface eth bridgeorip
Syntax
Purpose
Usage Guidelines
148
interface eth_slotno/port bridgeOrIP {ip | bridge | either}
To configure the GPON ONU interface bridge or IP parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
ip
IP
-
bridge
Bridge
-
either
Either
-
ZXAN(gpon-onu-mng)#
interface bridge or IP parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 bridgeOrIP ip
ZXAN(gpon-onu-mng)#interface eth eth_5/4 bridgeOrIP
either
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface eth dotlp-mapper
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port dot1p-mapper {def-priority priority
| dscp2prio priority | unmark-option {defprio | dscp2prio}}
To configure the GPON ONU interface dot1p-mapper parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
def-priority priority
Default priority
Range : 0 – 7
dscp2prio priority
DSCP to priority
Range : 0 – 255
characters
unmark-option
Unmark option
-
defprio
Unmark option default
priority
-
ZXAN(gpon-onu-mng)#
interface dot1p-mapper parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 dot1p-mapper
def-priority 7
dscp2prio 100
unmark-option defprio
ZXAN(gpon-onu-mng)# interface eth eth_5/4 dot1p-mapper
unmark-option dscp2prio
ZXAN(gpon-onu-mng)#
149
Related
Commands
None
interface eth eth-loop
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port eth-loop {loop3 | noloop}
To configure the GPON ONU interface Ethernet loop parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range: 1 – 31
characters
loop3
Loop3
-
noloop
No loop
-
ZXAN(gpon-onu-mng)#
interface Ethernet loop parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 eth-loop loop3
ZXAN(gpon-onu-mng)#interface eth eth_5/4 eth-loop noloop
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface eth expect-type
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port expect-type expect-type
To configure the GPON ONU interface expect type parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
expect-type
expect-type
Expect type
Range : 0 – 255
ZXAN(gpon-onu-mng)#
interface expect type parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 expect-type 10
ZXAN(gpon-onu-mng)#
150
Chapter 5 GPON
Related
Commands
None
interface eth max-frame
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port max-frame size
To configure the GPON ONU interface maximum frame parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
max-frame size
Max frame size
-
ZXAN(gpon-onu-mng)#
interface maximum frame parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 max-frame 10
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface eth pause-time
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port pause-time time
To configure the GPON ONU interface pause-time parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range: 1 – 31
characters
pause-time time
Pause-time
Range: 0 – 65535
ZXAN(gpon-onu-mng)#
interface pause-time parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 pause-time 100
ZXAN(gpon-onu-mng)#
151
Related
Commands
None
interface eth power-control
Syntax
interface eth_slotno/port power-control {disable | enable}
Purpose
To configure the GPON ONU interface power-control parameters
Usage Guidelines
Mode
Example
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
disable
Disable power control
-
enable
Enable power control
-
ZXAN(gpon-onu-mng)#
The following example displays how to disable the GPON ONU interface power-control parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 power-control disable
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface eth pppoe-filter
Syntax
interface eth_slotno/port pppoe-filter {disable | enable}
Purpose
To configure the GPON ONU interface PPPoE filter parameters
Usage Guidelines
Mode
Example
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
enable
PPPoE filter enable
-
disable
PPPoE filter disable
-
ZXAN(gpon-onu-mng)#
The following example displays how to enable the GPON ONU interface PPPoE filter and configure related parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 pppoe-filter enable
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed auto
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed full
152
Chapter 5 GPON
ZXAN(gpon-onu-mng)#interface
ZXAN(gpon-onu-mng)#
Related
Commands
eth
eth
eth
eth
eth
eth
eth
eth_5/4
eth_5/4
eth_5/4
eth_5/4
eth_5/4
eth_5/4
eth_5/4
speed full-10
speed full-100
speed full-1000
speed half-10
speed half-100
wiring dce
wiring dte
None
interface eth speed
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port speed {auto | full-10 | full-100 | full
-1000 | half-10 | half-100}
To configure the GPON ONU interface speed parameters
Parameter
Description
Value
eth_slotno/port
and port number
Range : 1 – 31
characters
auto
Negotiate speed
automatically
-
full-10
Full duplex 10 Mbps
-
full-100
Full duplex 100 Mbps
-
full-1000
Full duplex 1000 Mbps
-
half-10
Half duplex 10 Mbps
-
half-100
Half duplex 100 Mbps
-
ZXAN(gpon-onu-mng)#
interface speed parameters:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed auto
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed full-10
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed half-10
ZXAN(gpon-onu-mng)#interface eth eth_5/4 speed half-100
ZXAN(gpon-onu-mng)#interface eth eth_5/4 wiring dce
ZXAN(gpon-onu-mng)#interface eth eth_5/4 wiring dte
ZXAN(gpon-onu-mng)#
153
Related
Commands
None
interface eth wiring
Syntax
Purpose
Usage Guidelines
Mode
Example
interface eth_slotno/port wiring {dce | dte}
To configure the GPON ONU interface wiring parameters
Parameter
Description
Value
eth_slotno/port
Interface number
-
dce
DCE
-
dte
DTE
-
ZXAN(gpon-onu-mng)#
interface wiring parameters to DCE:
ZXAN(gpon-onu-mng)#interface eth eth_5/4 wiring dce
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pon alarm
Syntax
Purpose
Usage Guidelines
interface pon pon_slot/port alarm {enable | {disable [alarm
-disable-interval interval] } }
To configure alarm report control on PON port
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
enable | disable
Enable/disable alarm
report control
-
alarm-disable-inter
val interval
Interval for disabling
alarm report interval
Range: 0 – 255
0: When port is in
normal state, alarm
report is allowed
1-254 The interval for
disabling alarm report
255 Disable alarm
report infinitely
154
Chapter 5 GPON
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure alarm report control on PON port:
ZXAN(gpon-onu-mng)#interface pon pon_0/1 alarm
disable alarm-disable-interval 10
Related
Commands
None
interface pon current-threshold
Syntax
Purpose
Usage Guidelines
interface pon pon_slot/port current-threshold low threshold1
high threshold2
To configure bias current alarm threshold on ONU PON port
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
low threshold1
Minimum bias current
alarm threshold
Range: 0 – 131 mA
Maximum bias current
alarm threshold
Range: 0 – 131 mA
high threshold2
Mode
Example
Granularity: 0.002
mA
Granularity: 0.002
mA
ZXAN(gpon-onu-mng)#
The following example displays how to configure bias current alarm
threshold on ONU PON port:
ZXAN(gpon-onu-mng)#interface pon pon_0/1
current-threshold low 10 high 100
Related
Commands
None
interface pon rx-optical-threshold
Syntax
Purpose
Usage Guidelines
interface pon pon_slot/port rx-optical-threshold low {thresh
old1 | ont-internal-policy} high {threshold2 | ont-internal-p
olicy}
To configure optical receiving alarm threshold on ONU PON port
155
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
low threshold1
Minimum optical
power receiving
threshold
Range: -27 to -8 dBm
Granularity: 0.5 dBm
Default value is
determined by ONU
itself according to
optical module
ont-internal-policy
ONT internal policy
-
high threshold2
Maximum optical
power receiving
threshold
Range: -27 to -8 dBm
Default value is
determined by ONU
itself according to
optical module
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure optical receiving
alarm threshold on ONU PON port:
rx-optical-threshold low -27 high -13
Related
Commands
None
interface pon sf-threshold
Syntax
Purpose
Usage Guidelines
interface pon pon_slot/port sf-threshold threshold1 sd-thresh
old threshold2
To configure the SFi/SF alarm threshold
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
threshold1
SFi/SF alarm BER
threshold
Range: 3 – 8
SDi/SF alarm BER
threshold
Range: 4 – 10
sd-threshold
threshold2
Mode
Example
Default: 9
ZXAN(gpon-onu-mng)#
The following example displays how to configure the SFi/SF alarm
threshold:
156
Default: 5
Chapter 5 GPON
ZXAN(gpon-onu-mng)#interface pon pon_0/1 sf-threshold 4 sd-threshold 8
Related
Commands
Related
Information
None
When the configured threshold value is “y”, the corresponding BER
threshold value is 10 -y.
interface pon tx-optical-threshold
Syntax
interface pon pon_slot/port tx-optical-threshold low {thresh
old1 | ont-internal-policy} high {threshold2 | ont-internal-p
olicy}
Purpose
To configure optical power transmission alarm threshold on ONU
PON port
Usage Guidelines
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
low threshold1
Minimum optical
power transmission
threshold
Range: 0.5 – 5 dBm
Default value is
determined by ONU
itself according to
optical module
ont-internal-policy
ONT internal policy
-
high threshold2
Minimum optical
power transmission
threshold
Range: 0.5 – 5 dBm
Default value is
determined by ONU
itself according to
optical module
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure optical power
transmission alarm threshold on ONU PON port:
ZXAN(gpon-onu-mng)#interface pon pon_0/1 tx-optical-threshold low 0.5
Related
Commands
None
interface pon vol-threshold
Syntax
interface pon pon_slot/port vol-threshold low threshold1 high
threshold2
157
Purpose
Usage Guidelines
To configure feed voltage alarm threshold on PON port
Parameter
Description
Value
pon_slot/port
PON port, slot
number, port number
Range: 1 – 31
characters
low threshold1
Minimum feed voltage
alarm threshold
Range 0 – 6.56 V
Maximum feed
voltage alarm
threshold
Range 0 – 6.56 V
high threshold2
Mode
Example
Granularity: 0.02 V
Granularity: 0.02 V
ZXAN(gpon-onu-mng)#
The following example displays how to configure feed voltage
alarm threshold on PON port:
ZXAN(gpon-onu-mng)#interface pon pon_0/1 vol-threshold low 1 high 6
Related
Commands
None
interface pon sf-threshold
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pon pon_slotno/port sf-threshold sf-threshold sd-thr
eshold sd-threshold
To configure the PON interface SF threshold
Parameter
Description
Value
pon_slotno/port
PON slot number and
port number
Range : 1 – 31
characters
sf-threshold
sf-threshold
SF threshold
Range : 3 – 8
sd-threshold
sd-threshold
SD threshold
Range : 4 – 10
ZXAN(gpon-onu-mng)#
The following example displays how to configure the PON SF
threshold interface property:
ZXAN(gpon-onu-mng)#interface pon pon_0/9 sf-threshold
3 sd-threshold 10
ZXAN(gpon-onu-mng)#
158
Chapter 5 GPON
Related
Commands
None
interface pon gem-blocklen
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pon pon_slotno/port gem-blocklen length
To configure the PON interface GEM block length
Parameter
Description
Value
pon_slotno/port
PON slot number and
port number
Range : 1 – 31
characters
gem-blocklen length
GEM block length
length
Range : 0 – 65535
ZXAN(gpon-onu-mng)#
The following example displays how to configure the PON interface
GEM block length:
gem-blocklen 100
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots admin-state
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port admin-state {lock | unlock}
To configure the POTS interface admin state to lock or unlock
Parameter
Description
Value
pots_slotno/port
POTS slot number and
port number
Range : 1 – 31
characters
lock
Admin state lock
-
unlock
Admin state unlock
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface admin state:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 admin-state
lock
unlock
159
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots arc
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port arc arc arc-interval arc-interval
To configure the POTS interface ARC property
Parameter
Description
Value
pots_slotno/port
port number
Range : 1 – 31
characters
arc
ARC, 0 means disable
and 1 means enable
Range : 0 – 1
arc-interval
arc-interval
ARC interval
Range : 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface ARC property:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 arc 1
arc-interval 10
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots impedance
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port impedance impedance
To configure the POTS interface impedance
Parameter
Description
Value
pots_slotno/port
port number
Range : 1 – 31
characters
impedance
Impedance
Range : 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface impedance property:
160
Chapter 5 GPON
ZXAN(gpon-onu-mng)#interface pots pots_0/1 impedance 100
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots rx-gain
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port rx-gain rx-gain
To configure the POTS interface RX gain
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
rx-gain rx-gain
RX gain range from
-12 to 6, precision is
0.1 and unit is dB
Range: 1 – 5
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface RX gain:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 rx-gain 4
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots tx-gain
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port tx-gain tx-gain
To configure the POTS interface TX gain
Parameter
Description
Value
pots_slotno/port
port number
Range : 1 – 31
characters
tx-gain
TX gain range from -6
to 12, precision is 0.1
and unit is dB
Range : 1 – 5
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface TX gain:
161
ZXAN(gpon-onu-mng)#interface pots pots_0/1 tx-gain 4
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots tx-path
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port tx-path {fulltimeOnHook |
parttimeOnHook}
To configure the POTS interface TX path
Parameter
Description
Value
pots_slotno/port
port number
Range : 1 – 31
characters
tx-path
TX path
-
fulltimeOnHook
Full time On Hook
-
parttimeOnHook
Part time On Hook
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface TX path:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 tx-path
fulltimeOnHook
parttimeOnHook
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface uplink dot1p-mapper
Syntax
Purpose
Usage Guidelines
162
interface uplink uplink_slot/bridge/port dot1p-mapper {def-p
riority priority | dscp2prio priority | unmark-option {defprio
| dscp2prio}}
To configure the interface uplink dot1p mapper property
Parameter
Description
Value
ort
bridge number and
port number
Range : 1 – 31
characters
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
def-priority priority
Default priority
Range : 0 – 7
dscp2prio priority
DSCP to priority
Range : 0 – 255
characters
unmark-option
Unmark option
-
defprio
Unmark option default
priority
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the interface uplink dot1p mapper property:
ZXAN(gpon-onu-mng)#interface uplink uplink_0/1/1
dot1p-mapper
dot1p-mapper def-priority 1
dot1p-mapper dscp2prio 100
dot1p-mapper unmark-option defprio
dot1p-mapper unmark-option dscp2prio
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface video admin-state
Syntax
Purpose
Usage Guidelines
Mode
Example
interface video video_slotno/port admin-state {lock | unlock}
To administratively lock or unlock the video interface
Parameter
Description
Value
video_slotno/port
Video slot number
and port number
Range : 1 – 31
characters
lock
Lock (shutdown)
-
unlock
Unlock (no shutdown)
-
ZXAN(gpon-onu-mng)#
The following example displays how to administratively lock the
video interface:
ZXAN(gpon-onu-mng)#interface video video_0/1
admin-state lock
ZXAN(gpon-onu-mng)#
163
Related
Commands
None
interface video arc
Syntax
Purpose
Usage Guidelines
Mode
Example
interface video video_slotno/port arc arc arc-interval arc-inte
rval
To configure the video interface ARC UNI property
Parameter
Description
Value
video_slotno/port
Video slot number
and port number
Range : 1 – 31
characters
arc
ARC property
Range : 0 – 1
arc-interval
arc-interval
ARC interval
Range : 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the video interface ARC UNI property:
ZXAN(gpon-onu-mng)#interface video video_0/1 arc 1
arc-interval 10
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface video power-control
Syntax
interface video video_slotno/port power-control {disable |
enable}
Purpose
To enable or disable the video interface power control UNI property
Usage Guidelines
Mode
Example
164
Parameter
Description
Value
video_slotno/port
Video slot number
and port number
Range : 1 – 31
characters
disable
Power control disable
-
enable
Power control enable
-
ZXAN(gpon-onu-mng)#
The following example displays how to disable the video interface
power control UNI property:
Chapter 5 GPON
ZXAN(gpon-onu-mng)#interface video video_0/1
power-control disable
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface gemport bridge
Syntax
interwork gemport name bridge uplink_slot/bridge/port [max
-payload max-size]
no interwork gemport name
Purpose
Usage Guidelines
Mode
Example
To configure interconnection in bridge mode
Parameter
Description
Value
name
GEM port name
Range: 1 – 31
characters
ort
Specify uplink MAC
bridge port to access
GEM port
-
max-payload
max-size
GEM maximum
payload
0 – 65,535
Default: 1600
ZXAN(gpon-onu-mng)#
The following example displays how to configure interconnection
in bridge mode:
ZXAN(gpon-onu-mng)#interwork gemport name1 bridge uplink_12/1/1
max-payload 1000
Related
Commands
None
interface gemport dot1p
Syntax
interwork gemport name dot1p eth_slot/port [prio-list priorit
y-list] [max-payload max-size]
Purpose
Usage Guidelines
To configure interconnection in 802.1p mode
Parameter
Description
Value
name
GEM port name
Range: 1 – 31
characters
165
Mode
Example
Parameter
Description
Value
eth_slot/port
Specify Ethernet user
list to access GEM
port
-
prio-list priority-list
Priority list
Range: 0 – 7
max-payload
max-size
GEM maximum
payload
0-65,535
Default: 1600
ZXAN(gpon-onu-mng)#
in 802.1p mode:
ZXAN(gpon-onu-mng)#interwork gemport name1
dot1p eth_12/1 prio-list 0-3
Related
Commands
Related
Information
None
The priority list specifies multiple priorities. By default, 8 priorities
are specified.
interface gemport dot1p-bridge
Syntax
interwork gemport name dot1p-bridge uplink_slot/bridge/port
[prio-list priority-list] [max-payload max-size]
Purpose
Usage Guidelines
Mode
Example
To configure interconnection in bridge+802.1p mode
Parameter
Description
Value
name
GEM port name
Range: 1 – 31
characters
ort
Specify uplink MAC
bridge port to access
GEM port
Range: 1 – 31
characters
prio-list priority-list
Priority list
Range: 0 – 7
max-payload
max-size
GEM maximum
payload
Range: 0 – 65,535
Default: 1600
ZXAN(gpon-onu-mng)#
in bridge+802.1p mode:
ZXAN(gpon-onu-mng)#interwork gemport name1 dot1p-bridge
uplink_12/1/1 prio-list 0-3
166
Chapter 5 GPON
Related
Commands
Related
Information
None
Using prio-list parameter, multiple priorities can be specified. By
default, all priorities from 0 to 7 are used.
interface gemport uni
Syntax
interwork gemport name uni eth_slot/portlist [max-payload
max-size]
Purpose
Usage Guidelines
Mode
Example
To configure interconnection in UNI mode
Parameter
Description
Value
name
GEM port name
Range: 1 – 31
characters
eth_slot/portlist
Specify Ethernet user
port list to access
GEM port
-
max-payload
max-size
GEM maximum
payload
Range: 0 – 4095
Default: 1600
ZXAN(gpon-onu-mng)#
in UNI mode:
ZXAN(gpon-onu-mng)#interwork gemport name1 uni 12/1 max-payload 1000
Related
Commands
None
mac-filter ip-host
Syntax
mac-filter ip-host hostid mac-address {discard | forward}
no mac-filter interface-name mac-address
Purpose
Usage Guidelines
To create MAC address filter for IP host
Parameter
Description
Value
hostid
Host ID
Range: 1 – 255
mac-address
MAC address
XXXX.XXXX.XXXX
167
Mode
Example
Parameter
Description
Value
discard
Discard the filtered
packets
-
forward
Forward the filtered
packets
-
ZXAN(gpon-onu-mng)#
The following example displays how to create MAC address filter
for IP host:
ZXAN(gpon-onu-mng)#mac-filter ip-host 1 1111.1111.1111 discard
Related
Commands
None
mac-filter uni
Syntax
mac-filter uni eth_slotno/port macaddress {discard | forward}
no mac-filter uni eth_slotno/port macaddress
Purpose
Usage Guidelines
Mode
Example
To configure MAC address filter on user-side port
Parameter
Description
Value
eth_slotno/port
User-sided port
number
-
macaddress
MAC address
XXXX.XXXX.XXXX
discard
Discard the filtered
packets
-
forward
Forward the filtered
packets
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure MAC address filter
on user-side port:
ZXAN(gpon-onu-mng)#mac-filter uni eth_12/1 1111.1111.1111 discard
Related
Commands
None
mac-filter uplink
Syntax
168
mac-filter uplink uplink_slotno/bridge/port macaddress {disc
ard | forward}
Chapter 5 GPON
Purpose
Usage Guidelines
Mode
Example
To configure MAC address filter on uplink port
Parameter
Description
Value
port
Uplink port number
-
macaddress
MAC address
XXXX.XXXX.XXXX
discard
Discard filtered
packets
-
forward
Forward filtered
packets
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure MAC address filter
on uplink port:
ZXAN(gpon-onu-mng)#mac-filter uplink uplink_12/1/1 1111.1111.1111 forward
Related
Commands
None
mc-interwork
Syntax
Purpose
Usage Guidelines
Mode
Example
mc-interwork uplink_slot/bridge/port
To configure a multicast channel
Parameter
Description
Value
ort
Uplink port number
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure a multicast channel:
ZXAN(gpon-onu-mng)#mc-interwork uplink_0/1/1
Related
Commands
None
performance dot1x ethuni
Syntax
performance dot1x ethuni eth_slot/port {{start [threshold
profile-name]} | stop | {threshold profile-name}}
no performance dot1x ethuni eth_slot/port threshold
169
Purpose
Usage Guidelines
Mode
Example
To start/stop 802.1x performance statistics on Ethernet user port
and set performance threshold
Parameter
Description
Value
eth_slot/port
CES port number, slot
number, port number
Range: 1 – 31
characters
start [threshold
profile-name]
Start performance
statistic and specify
relevant performance
threshold profile
-
stop
Stop performance
statistic
-
threshold
profile-name
Profile name
Range: 1 – 63
characters
ZXAN(gpon-onu-mng)#
The following example displays how to start 802.1x performance
statistic on Ethernet user port and set performance threshold:
ZXAN(gpon-onu-mng)#performance dot1x ethuni eth_0/1
start threshold default-eth-dot1x
Related
Commands
None
performance eth
Syntax
Purpose
Usage Guidelines
Mode
Example
performance eth eth_slotno/port {start | stop}
To start or stop the ONU Ethernet port performance statistics
Parameter
Description
Value
etheth_slotno/port
Ethernet card slot
number and port
number
Range: 0 – 255
characters
start
Start Ethernet
-
stop
Stop Ethernet
-
ZXAN(gpon-onu-mng)#
The following example displays how to start or stop the ONU Ethernet port performance statistics:
ZXAN(gpon-onu-mng)#performance eth eth_0/1 start
ZXAN(gpon-onu-mng)#performance eth eth_0/1 stop
ZXAN(gpon-onu-mng)#
170
Chapter 5 GPON
Related
Commands
None
performance gal-eth
Syntax
Purpose
Usage Guidelines
Mode
Example
performance gal-eth gemport-id {start | stop}
To start or stop the ONU GAL Ethernet performance statistics
Parameter
Description
Value
gemport-id
GAL Ethernet GEM
port ID
Range: 1 – 255
characters
start
Start GAL Ethernet
type interlock
-
stop
Stop GAL Ethernet
type interlock
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the ONU GAL Ethernet
performance statistics:
ZXAN(gpon-onu-mng)#performance gal-eth 1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance gem
Syntax
Purpose
Usage Guidelines
Mode
performance gem gemport-id {start | stop}
To start or stop the ONU GEM port performance statistics
Parameter
Description
Value
gemport-id
GEM port ID
Range: 1 – 255
characters
start
Start GEM port
-
stop
Stop GEM port
-
ZXAN(gpon-onu-mng)#
171
Example
The following example displays how to start the ONU GEM port
ZXAN(gpon-onu-mng)#performance gem 1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance mac-bridge
Syntax
Purpose
Usage Guidelines
Mode
Example
performance mac-bridge bridge_slot/bridge {start | stop}
To start or stop the ONU MAC bridge performance statistics
Parameter
Description
Value
bridge_slot/bridge
MAC bridge slot
number and bridge
number, format:
bridge_X/Y
Range: 1 – 255
characters
start
Start MAC bridge
-
stop
Stop MAC bridge
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the ONU MAC bridge
ZXAN(gpon-onu-mng)#performance mac-bridge bridge_1/1
start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance bridge-port uni
Syntax
performance bridge-port uni eth_slot/port {{start [threshold
performance-threshold name]} | stop | {threshold performance
-threshold name}}
Purpose
To start/stop the performance statistic on bridge-port UNI interface
Usage Guidelines
172
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
eth_slot/port
Ethernet port, slot
number, port number
Range: 1 – 31
characters
start
Start performance
statistic
-
stop
Stop performance
statistic
-
threshold performan
ce-threshold name
Threshold profile
name
Range: 1 – 63
characters
ZXAN(gpon-onu-mng)#
The following example displays how to start the performance
statistic on bridge-port UNI interface:
ZXAN(gpon-onu-mng)#performance bridge-port uni eth_0/1
start threshold default-uni
Related
Commands
None
performance bridge-port uplink
Syntax
performance bridge-port uplink uplink_slot/bridge/port {{st
art [threshold performance-threshold name]} | stop | {thresh
old performance-threshold name}}
no performance bridge-port uplink uplink_slot/bridge/port
threshold
Purpose
Usage Guidelines
Mode
Example
To start/stop the performance statistic on bridge-port uplink interface
Parameter
Description
Value
ort
Uplink port number,
slot number, bridge
ID, port ID
Range: 1 – 31
characters
start
Start performance
statistic
-
stop
Stop performance
statistic
-
threshold performan
ce-threshold name
Threshold profile
name
Range: 1 – 63
characters
ZXAN(gpon-onu-mng)#
The following example displays how to start the performance
statistic on bridge-port uplink interface:
173
ZXAN(gpon-onu-mng)#performance bridge-port uplink uplink_0/1/1
start threshold default-uplink
Related
Commands
None
performance mgc
Syntax
Purpose
Usage Guidelines
Mode
Example
performance mgc mgc-id {start | stop}
To start/stop the ONU MGC performance statistics
Parameter
Description
Value
mgc-id
MGC ID
Range: 1 – 65535
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the ONU MGC performance statistics:
ZXAN(gpon-onu-mng)#performance mgc 1 start
Related
Commands
None
performance ces
Syntax
performance ces ces_slot/port {{start [threshold performanc
e-threshold name]} | stop | {threshold performance-threshold
name]}
no performance ces ces_slot/port threshold
Purpose
Usage Guidelines
174
To start/stop the performance statistic of ONU CES port
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
start
Start performance
statistics
-
stop
Stop performance
statistics
-
threshold performan
ce-threshold name
Performance profile
name
Range: 1 – 63
characters
Chapter 5 GPON
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to start performance statistics
of ONU CES port:
ZXAN(gpon-onu-mng)#performance ces ces_0/1
start threshold default-ces
Related
Commands
None
performance radius
Syntax
performance radius {{start [threshold profile-name] | stop |
{threshold profile-name}}
no performance radius threshold
Purpose
Usage Guidelines
Mode
Example
To start/stop the ONU RADIUS performance statistics
Parameter
Description
Value
start [threshold
profile-name]
Start performance
statistics
-
stop
Stop performance
statistics
-
threshold
profile-name
Performance profile
name
Range: 1 – 63
characters
ZXAN(gpon-onu-mng)#
The following example displays how to start the ONU RADIUS performance statistics:
ZXAN(gpon-onu-mng)#performance radius start threshold default-radius
Related
Commands
None
performance bridge-port ip-host
Syntax
Purpose
Usage Guidelines
performance bridge-port ip-host ip host id {start | stop}
To start/stop the bridge-port host performance statistics
Parameter
Description
Value
ip host id
Bridge port host ID
Range: 1 – 255
start
Start statistics
-
stop
Stop statistics
-
175
Mdde
Example
ZXAN(gpon-onu-mng)#
The following example displays how to start the bridge-port host
ZXAN(gpon-onu-mng)#performance bridge-port ip-host 100 start
Related
Commands
None
performance call-ctrl
Syntax
performance call-ctrl pots_slot/port {start | stop}
Purpose
To start/stop the call-controller performance statistics
Usage Guidelines
Mode
Example
Parameter
Description
Value
pots_slot/port
port number
Range: 1 – 255
characters
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the call-controller performance statistics:
ZXAN(gpon-onu-mng)#performance call-ctrl pots_0/1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance rtp
Syntax
Purpose
Usage Guidelines
Mode
176
performance pots_slot/port {start | stop}
To start/stop the POTS interface RTP performance statistics
Parameter
Description
Value
pots_slot/port
port number
Range: 1 – 255
characters
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
Chapter 5 GPON
Example
The following example displays how to start the POTS interface
RTP performance statistics:
ZXAN(gpon-onu-mng)#performance rtp pots_0/1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance sip-call-init
Syntax
Purpose
Usage Guidelines
Mode
Example
performance sip-call-init sip-agent-id {start | stop}
To start/stop the SIP agent statistics
Parameter
Description
Value
sip-agent-id
SIP agent ID
Range: 1 – 65535
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the SIP agent performance statistics:
ZXAN(gpon-onu-mng)#performance sip-call-init 1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
power-shedding
Syntax
power-shedding [restore-interval time] [{data | voice | vide
o-overlay | video-return | dsl | atm | ces | frame | sonet}
{immediate | {interval time-before-shedding}}]
no power-shedding {data | voice | video-overlay | video-re
turn | dsl | atm | ces | frame | sonnet | all}
Purpose
Usage Guidelines
To close some services to shed power
Parameter
Description
Value
restore-interval
time
Time interval
from restoring AC
power to ending
power-shedding
177
Mode
Example
Parameter
Description
Value
data
Ethernet data
-
voice
Voice service
-
video-overlay
Video overlay
-
video-return
Restoring video
-
dsl
DSL service
-
atm
ATM service
-
ces
CES service
-
frame
Non-Ethernet service
-
sonet
SONET
-
immediate
Close service
immediately after
AC power is faulty
-
interval time-before
-shedding
Time interval from
faulty AC power to
closing service
ZXAN(gpon-onu-mng)#
The following example displays how to close data service to shed
power:
ZXAN(gpon-onu-mng)#power-shedding data interval 10
Related
Commands
None
pre-filter ip-host
Syntax
Purpose
Usage Guidelines
178
pre-filter ip-host hostid type {discard | forward} [type {disc
ard | forward}] [type {discard | forward}]
To configure the bridge port filter for IP host
Parameter
Description
Value
hostid
Host ID
Range: 1 – 255
type
Packet type
appleTalkarpbpduipv4broadcast ipv4multicast ipv6multicast ipx mac-address netBEUIpppoerarp
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
discard
Discard filtered
packets
-
forward
Forward filtered
packets
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the bridge port
filter for IP host:
ZXAN(gpon-onu-mng)#pre-filter ip-host 1 arp discard pppoe forward
Related
Commands
None
pre-filter uni
Syntax
Purpose
Usage Guidelines
pre-filter unieth_slotno/port [appleTalk {discard | forward}]
[arp {discard | forward}] [bpdu {discard | forward}] [ipv
4broadcast {discard | forward}] [ipv4multicast {discard |
forward}] [ipv6multicast {discard | forward}] [ipx {discard
| forward}] [netBEUI {discard | forward}] [pppoe {discard
| forward}] [rarp {discard | forward}]
To configure the packet filter on UNI side bridge port
Parameter
Description
Value
eth_slotno/port
Ethernet port number,
slot number, port
number
Range: 1 – 31
characters
discard
Discard filtered
packets
-
forward
Forward filtered
packets
-
appleTalk
AppleTalk protocol
-
arp
ARP protocol
-
bpdu
BPDU protocol
-
ipv4broadcast
IPv4 broadcast
protocol
-
ipv4multicast
IPv4 multicast
protocol
-
ipv6multicast
IPv6 multicast
protocol
-
ipx
IPX protocol
-
179
Mode
Example
Parameter
Description
Value
netBEUI
NetBEUI protocol
-
pppoe
PPPoE protocol
-
rarp
RARP protocol
-
ZXAN(gpon-onu-mng)#
The following example displays how to discard PPPoE and forward
RARP on UNI side bridge port:
ZXAN(gpon-onu-mng)#pre-filter uni eth_0/1 pppoe discard rarp forward
Related
Commands
None
pre-filter uplink
Syntax
Purpose
Usage Guidelines
180
pre-filter uplink uplink_slotno/bridge/port [appleTalk {discard
| forward}] [arp{discard | forward}] [bpdu {discard | forw
ard}] [ipv4broadcast {discard | forward}] [ipv4multicast
{discard | forward}] [ipv6multicast {discard | forward}]
[ipx {discard | forward}] [netBEUI {discard | forward}]
[pppoe {discard | forward}] [rarp {discard | forward}]
To configure the uplink network side bridge port filter
Parameter
Description
Value
port
Uplink port number,
slot number, bridge
number, port number
Range: 1 – 31
characters
discard
Discard filtered
packets
-
forward
Forward filtered
packets
-
appleTalk
AppleTalk protocol
-
arp
ARP protocol
-
bpdu
BPDU protocol
-
ipv4broadcast
IPv4 broadcast
protocol
-
ipv4multicast
IPv4 multicast
protocol
-
ipv6multicast
IPv6 multicast
protocol
-
ipx
IPX protocol
-
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
netBEUI
NetBEUI protocol
-
pppoe
PPPoE protocol
-
rarp
RARP protocol
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the uplink network side bridge port filter to discard ipx:
ZXAN(gpon-onu-mng)#pre-filter uplink uplink_5/1/1 ipx discard
Related
Commands
None
pw delete
Syntax
Purpose
Usage Guidelines
Mode
Example
pw delete ces_slot/port
To delete the configured PW service
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
ZXAN(gpon-onu-mng)#
The following example displays how to delete configured PW service:
ZXAN(gpon-onu-mng)#pw delete ces_0/1
Related
Commands
None
pw ethernet
Syntax
Purpose
Usage Guidelines
pw ethernet ces_slot/port bridge bridge_slot/bridge dst-mac
mac-address loopback {disable | enable} tx-payload-ecid
ecid tx-signalling-ecid ecid [expected-payload-ecid ecid
expected-signalling-ecid ecid] tag-policy {untag | {tag
[prio priority vid vlan-id]}}
To configure the Ethernet-based PW parameters
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
181
Mode
Example
Parameter
Description
Value
-port
Bridge port number
Range: 1 – 31
characters
dst-mac mac-addr
ess
Destination MAC
address
xxxx.xxxx.xxxx
loopback {disable |
enable}
Loopback mode
-
tx-payload-ecid ecid
Payload ECID
value sent from
TDM terminal
to packet-switch
network
0xXXXXX102
tx-signalling-ecid
ecid
Signalling ECID
value sent from
TDM terminal
to packet-switch
network
0xXXXXXXXX
expected-payloadecid ecid
Payload ECID
value received
from TDM terminal
to packet-switch
network
0xXXXXX102
expected-signalling
-ecid ecid
Signalling ECID
value received
from TDM terminal
to packet-switch
network
0xXXXXXXXX
tag-policy {untag
| {tag [prio priority
vid vlan-id]}}
Tag policy
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the Ethernetbased PW parameters:
ZXAN(gpon-onu-mng)#pw ethernet ces_0/1 bridge
bridge_0/1 dst-mac 5697.1656.4444 loopback disable
tx-payload-ecid 0x1102 tx-signalling-ecid 0x0
expected-payload-ecid 0x1102 expected-signalling-ecid 0x0
tag-policy tag prio 4 vid 133
Related
Commands
None
pw ip
Syntax
Purpose
Usage Guidelines
182
pw ip ces_slot/port near-end-ip tcp-udp-port [host host-id] farend-ip ip
To configure the IP based PW parameters
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
near-end-ip
tcp-udp-port
Near end IP
information, TCP/UDP
port number
Range: 0 – 65535
host host-id
IP host ID
Range: 0 – 65535
far-end-ip ip
Far end IP
information, far end
terminal URI address
Range: 1 – 31
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the IP based PW
parameters:
ZXAN(gpon-onu-mng)#pw ip ces_0/1 near-end-ip 5060
host 1 far-end-ip udp://zte.com.cn
Related
Commands
None
pw optional
Syntax
Purpose
Usage Guidelines
pw optional ces_slot/port [service-type {basic-unstructure |
octet-aligned-unstructure | structured}] [signalling {no-sig
nalling | cas-same-packet-stream | cas-seperate-channel}]
[arc arc arc-interval arc interval]
To configure the PW optional parameters
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
service-type
{basic-unstructure
| octet-aligned
-unstructure |
structured}
Service type
-
signalling
{no-signalling |
cas-same-packet-st
ream | cas-seperat
e-channel}
Signalling information
-
arc arc
switch
0 or 1
arc-interval arc
interval
interval, effective
when arc is 1
Range: 0 – 255
183
Mode
Example
ZXAN(gpon-onu-mng)#
The following example displays how to configure PW optional parameters:
ZXAN(gpon-onu-mng)# pw optional ces_0/1 arc 1 arc-interval 10
Related
Commands
None
pw rtp
Syntax
Purpose
Usage Guidelines
184
pw rtp ces_slot/port payload-ssrc synchronization-source sign
aling-ssrc synchronization-source payload-ptype payload-type
signaling-ptype payload-type [expected-payload-ssrc synchr
onization-source expected-signalling-ssrc synchronization-sou
rce] [expected-payload-ptype payload-type expected-signall
ing-ptype payload-type] [clock-reference frequency] [rtp-tsmode {unknown | absolute | differential}]
To configure the PW service related parameters
Parameter
Description
Value
ces_slot/port
CES port ID, slot
number, port ID
Range: 1 – 31
characters
payload-ssrc synchr
onization-source
Payload RTP
synchronization
source
Range: 0 –
4294967295 (4 bytes)
signaling-ssrc synch
ronization-source
Signaling RTP
synchronization
source
Range: 0 –
4294967295 (4 bytes)
payload-ptype
payload-type
RTP payload type
Range: 96 – 127
signaling-ptype
payload-type
RTP signaling type
Range: 96 – 127
expected-payloadssrc synchronizationsource
Expected payload
RTP synchronization
source
Range: 0 –
4294967295 (4 bytes)
expected-signalling
-ssrc synchronization
-source
Expected signaling
RTP synchronization
source
Range: 0 –
4294967295 (4 bytes)
expected-payloadptype payload-type
Expected RTP payload
type
Range: 0 – 55
expected-signalling
-ptype payload-type
Expected RTP
signaling type
Range: 0 – 55
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
clock-reference
frequency
Clock reference
frequency
Range: 0 – 65535
rtp-ts-mode
{unknown |
absolute |
differential}
RTP time stamp mode
-
Default: 1
ZXAN(gpon-onu-mng)#
The following example displays how to configure PW service related parameters:
ZXAN(gpon-onu-mng)#pw rtp ces_0/1 payload-ssrc 3 signalling-ssrc 0
payload-ptype 0 signalling-ptype 0 rtp-ts-mode differential
Related
Commands
None
pw tdm
Syntax
Purpose
Usage Guidelines
pw tdm ces_slot/port payloadsize payloadsize [payload-delay
delay-time] timing-mode {network-timing | differential-tim
ing | adaptive-timing | loop-timing} [pw-profile profile-name
To configure the TDM service
Parameter
Description
Value
ces_slot/port
number, port number
Range: 1 – 31
characters
payloadsize
payloadsize
Packet bytes
Range: 0 – 65535
payload-delay
delay-time
Payload delay
Range: 0 – 255
NxDS0, no signalling,
N = 1 64 (8 ms)
required, 40 (5 ms)
desired;
NxDS0, no signalling,
N = 2..4 32 (4
ms) NxDS0, no
signalling, N > 4 8
(1 ms)
NxDS0 with DS1 CAS
24 (3 ms) NxDS0 with
E1 CAS 16 (2 ms)
185
Mode
Example
Parameter
Description
Value
timing-mode
{network-timing
| differential-timing
| adaptive-timing |
loop-timing}
TDM service timing
mode
-
pw-profile
profile-name
PW maintenance
parameter profile
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the TDM service:
ZXAN(gpon-onu-mng)#pw tdm ces_0/1 payloadsize 32
timing-mode differential-timing
Related
Commands
None
up-queue-map
Syntax
up-queue-map uni eth_slot/port priority-list queue queue id
up-queue-map
queue queue id
uplink
uplink_slot/bridge/port
priority-list
no up-queue-map uni eth_slot/port
no up-queue-map uplink uplink_slot/bridge/port
Purpose
Usage Guidelines
Mode
Example
To configure the mapping relationship between 802.1p service on
UNI or MAC bridge uplink side bridge port and upstream priority
queue
Parameter
Description
Value
uni eth_slot/port
UNI port number
Range: 1 – 31
characters
uplink uplink_slot/bri
dge/port
Uplink port number
Range: 1 – 31
characters
priority-list
Priority list
Range: 0 – 7
queue queue id
Queue ID
Range: 0 – 7
ZXAN(gpon-onu-mng)#
The following example displays how to configure the mapping relationship between 802.1p service on UNI or MAC bridge uplink
side bridge port and upstream priority queue:
ZXAN(gpon-onu-mng)#up-queue-map uni eth_12/1 0-4 queue 1
ZXAN(gpon-onu-mng)#up-queue-map uni eth_12/1 5,6 queue 2
ZXAN(gpon-onu-mng)#up-queue-map uni eth_12/1 7 queue 3
ZXAN(gpon-onu-mng)#up-queue-map uplink uplink_12/1/1 0-6 queue 1
186
Chapter 5 GPON
Related
Commands
None
vlan-filter
Syntax
vlan-filter {iphost host-id | uni eth_slotno/port | uplink uplink
_slotno/bridge/port} {priority priority vid vid}
no vlan-filter {iphost host-id | uni eth_slotno/port | uplink upli
nk_slotno/bridge/port} {priority priority vid vid}
Purpose
Usage Guidelines
Mode
Example
To configure the VLAN filter parameters
Parameter
Description
Value
iphost host-id
IP host ID
Range: 1 – 255
uni eth_slotno/port
User Network
Interface
-
uplink uplink_slotno/
bridge/port
Uplink interface
-
priority priority
Priority number
Range: 0 – 7
vid vid
VLAN ID
Range: 1 – 4094
ZXAN(gpon-onu-mng)#
The following example displays how to configure the VLAN filter
parameters:
ZXAN(gpon-onu-mng)#vlan-filter ip-host 1 priority 1 vid 100
ZXAN(gpon-onu-mng)#vlan-filter uni eth_0/1 priority 1 vid 100
ZXAN(gpon-onu-mng)#vlan-filter uplink uplink_0/1/5 priority
1 vid 100
ZXAN(gpon-onu-mng)#
Related
Commands
None
vlan-filter uni
Syntax
vlan-filter uni eth_slot/port priority priority vid vid
no vlan-filter uni eth_slot/port priority priority vid vid
Purpose
Usage Guidelines
To create the VLAN filter parameters on UNI port
Parameter
Description
Value
eth_slot/port
UNI port number
Range: 1 – 31
characters
187
Mode
Example
Parameter
Description
Value
priority priority
Priority list
Range: 0 – 7
vid vid
VLAN ID
Range: 1 – 4094
ZXAN(gpon-onu-mng)#
The following example displays how to create the VLAN filter parameters on UNI port:
ZXAN(gpon-onu-mng)#vlan-filter uni eth_0/1 priority 0 vid 10
Related
Commands
None
vlan-filter uplink
Syntax
vlan-filter uplink uplink_slot/bridge/port priority priority vid vid
no vlan-filter uplink uplink_slot/bridge/port priority priority vid
vid
Purpose
To create the VLAN filter parameters on uplink port
Usage Guidelines
Mode
Example
Parameter
Description
Value
ort
Uplink port nubmer
Range: 1 – 31
characters
priority priority
Priority list
Range: 0 – 7
vid vid
VLAN ID
Range: 1 – 4094
ZXAN(gpon-onu-mng)#
The following example displays how to create the VLAN filter parameters on uplink port:
ZXAN(gpon-onu-mng)#vlan-filter uplink uplink_0/1/1 priority 0 vid 10
Related
Commands
None
vlan-filter-mode
Syntax
vlan-filter-mode {iphost host-id | uni eth_slotno/port | uplink
uplink_slotno/bridge/port} tag-filter {discard | prio-filter
| prio-vid-filter | transparent | vid-filter} untag-filter
{transparent | discard}
no vlan-filter-mode {iphost host-id | uni eth_slotno/port |
uplink uplink_slotno/bridge/port}
Purpose
188
To configure the VLAN filter mode
Chapter 5 GPON
Usage Guidelines
Mode
Example
Parameter
Description
Value
iphost host-id
IP host ID
Range: 1 – 255
uni eth_slotno/port
User Network
Interface
-
uplink uplink_slotno/
bridge/port
Uplink card
-
tag-filter
Tag filter
-
untag-filter
Untag filter
-
discard
Discard
-
prio-filter
Prio-filter
-
prio-vid-filter
Prio-vid-filter
-
transparent
Transparent
-
vid-filter
Vid-filter
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the VLAN filter
mode:
ZXAN(gpon-onu-mng)#vlan-filter-mode ip-host
discard untag-filter discard
discard untag-filter transparent
prio-filter untag-filter discard
prio-filter untag-filter transparent
prio-vid-filter untag-filter discard
prio-vid-filter untag-filter transparent
transparent untag-filter discard
transparent untag-filter transparent
vid-filter untag-filter discard
vid-filter untag-filter transparent
ZXAN(gpon-onu-mng)#
Related
Commands
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
1 tag-filter
None
vlan-filter-mode uni
Syntax
vlan-filter-mode uni eth_slot/port tag-filter {transparent |
discard | prio-filter | vid-filter | prio-vid-filter} untag-filter
{transparent | discard}
189
no vlan-filter-mode uni eth_slot/port
Purpose
Usage Guidelines
Mode
Example
To create the VLAN filter parameters on UNI port
Parameter
Description
Value
eth_slot/port
UNI port number
Range: 1 – 31
characters
transparent
Transparent
-
discard
Discard
-
prio-filter
Priority filter
-
vid-filter
VLAN ID filter
-
prio-vid-filter
Priority and VLAN ID
filter
-
tag-filter
Tag filter mode
-
untag-filter
Untag filter mode
-
ZXAN(gpon-onu-mng)#
The following example displays how to create the VLAN filter parameters on UNI port:
ZXAN(gpon-onu-mng)#vlan-filter-mode uni eth_0/1
tag-filter discard untag-filter transparent
Related
Commands
None
vlan-filter-mode uplink
Syntax
vlan-filter-mode uplink uplink_slot/bridge/port tag-filter {tra
nsparent | discard | prio-filter | vid-filter | prio-vid-filter}
untag-filter {transparent | discard}
no vlan-filter-mode uplink uplink_slot/bridge/port
Purpose
To create the VLAN filter parameters on uplink port
Usage Guidelines
190
Parameter
Description
Value
ort
Uplink port number
Range: 1 – 31
characters
transparent
Transparent mode
-
discard
Discard
-
prio-filter
Priority filter
-
vid-filter
VLAN ID filter
-
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
prio-vid-filter
Priority and VLAN ID
filter
-
tag-filter
Tag filter mode
-
untag-filter
Untag filter mode
-
ZXAN(gpon-onu-mng)#
The following example displays how to create the VLAN filter parameters on uplink port:
ZXAN(gpon-onu-mng)#vlan-filter-mode uplink uplink_0/1/1
Related
Commands
None
vlan-tag
Syntax
vlan-tag {iphost host-id | uni eth_slotno/port} {down-mode
{transparent | untag}} {up-mode {add | overwrite | transp
arent} {up-prio up-prio up-vid up-vid} [up-mode {add | over
write | transparent} | up-prio up-prio up-vid up-vid] [downmode {transparent | untag} | up-prio up-prio up-vid up-vid]
[down-mode {transparent | untag} | up-mode {add | over
write | transparent]
no vlan-tag {iphost host-id | uni eth_slotno/port
Purpose
Usage Guidelines
To configure the VLAN priority
Parameter
Description
Value
iphost host-id
IP host ID
Range: 1 – 255
uni
User Network
Interface
-
eth_slotno/port
Ethernet card slot
number and port
number
Range: 1 – 31
characters
down-mode
Down mode
-
transparent
Transparent
-
untag
Untag
-
up-mode
Up mode
-
add
Add
-
overwrite
Over write
-
191
Mode
Example
Parameter
Description
Value
transparent
Transparent
-
up-prio up-prio
Up priority
Range: 0 – 7
up-vid up-vid
Up VLAN id
Range: 1 – 4094
ZXAN(gpon-onu-mng)#
The following example displays how to configure the VLAN priority:
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 down-mode transparent
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 up-mode add
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 up-mode overwrite
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 up-mode transparent
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 up-prio 1 up-vid 100
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 down-mode transparent
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 down-mode untag
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 up-mode add
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 up-mode overwrite
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 up-mode transparent
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 up-prio 1 up-vid 100
ZXAN(gpon-onu-mng)#
Related
Commands
None
vlan-tag uni
Syntax
vlan-tag uni eth_slot/port down-mode {transparent | untag
| delete-pvid} [up-mode {transparent | overwrite | add |
add-pvid}] [up-prio priority up-vid vlanid]
vlan-tag uni eth_slot/port up-mode {transparent | overwrite
| add | add-pvid} [down-mode {transparent | untag | delet
e-pvid}] [up-prio priority up-vid vlanid]
vlan-tag uni eth_slot/port up-prio priority up-vid vlanid [up-m
ode {transparent | overwrite | add | add-pvid}] [down-m
ode {transparent | untag | delete-pvid}]
no vlan-tag uni eth_slot/port
Purpose
Usage Guidelines
192
To configure the ONT UNI port property
Parameter
Description
Value
eth_slot/port
Ethernet card slot
number and port
number
Range: 1 – 31
characters
up-mode
Upstream mode
-
up-prio priority
Upstream priority
Range: 0 – 7
up-vid vlanid
Upstream VLAN ID
Range: 1 – 4094
down-mode
Downstream mode
-
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
transparent
Transparent mode
-
untag
Untag mode
-
delete-pvid
Delete PVLAN ID
-
overwrite
Overwrite
-
add-pvid
Add PVLAN ID
-
add
Add
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONT UNI port
property:
ZXAN(gpon-onu-mng)#vlan-tag uni eth_0/1 up-mode transparent
Related
Commands
None
show gpon remote-onu bridge
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu bridge gpon-onu_shelf/slot/olt:onu
[bridge_slotno/bridgeno]
To display the ONU MAC bridge information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
bridge_slotno/bridg
eno
MAC bridge ID
Range: 1 – 31
characters
The following example displays the ONU MAC bridge information:
ZXAN(config)#show gpon remote-onu bridge gpon-onu_0/3/1:1
Bridge name: bridge_0/1
STP:
true
MAC learn: true
Port bridge: true
Priority:
0
Max age:
6
Hello time: 1
Forword delay:4
UnknownMac discard:false
193
Related
Commands
None
show gpon remote-onu bridge-port
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu bridge-port uni gpon-onu_shelf/slot/
olt:onu [eth_slot/port]
To display the MAC bridge port information at UNI side
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
Range: 1 – 31
characters
The following example displays the MAC bridge port information at
UNI side:
ZXAN(config)#show gpon remote-onu bridge-port uni gpon-onu_0/3/1:1
Interface name: eth_0/1
Bridge port:
bridge_0/1
Priority:
0
Path-cost:
100
STP:
false
Encap-method: llc
Lan-fcs:
discard
Traffic limit: None
Related
Commands
None
uplink
Syntax
Purpose
Usage Guidelines
Mode
194
show gpon remote-onu bridge-port uplink gpon-onu_shelf/sl
ot/olt:onu [uplink_slot/bridge/port]
To display the uplink-side MAC bridge port information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
Uplink port ID
Range: 1 – 31
characters
Chapter 5 GPON
Example
The following example displays the uplink-side MAC bridge port
information:
ZXAN(config)#show gpon remote-onu bridge-port uplink gpon-onu_0/3/1:1
Interface name: uplink_0/1/1;
Priority:
0
Path-cost
100
STP:
false
Encap-method:llc
Lan-fcs:
discard
Interface name: uplink_0/1/255;
Priority:
0
Path-cost
1
STP:
true
Encap-method:llc
Lan-fcs:
forward
Related
Commands
None
show gpon remote-onu device
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu device gpon-onu_shelf/slot/olt:onu
To display the specific ONU device information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
The following example displays the specific ONU device information:
ZXAN(config)#show gpon remote-onu device gpon-onu_0/3/1:1
vendor ID:
CIGG;
version:
00109-00110-03;
sn:
CIGG06120625;
admin-status:
unlock;
battery-backup:
false;
secMode:
aes;
product code:
0;
totalPrioQueueNum: 21;
totalTrafficSchNum: 0
Related
Commands
None
show gpon remote-onu distance
Syntax
Purpose
Usage Guidelines
show gpon remote-onu distance gpon-onu_shelf/slot/olt:onu
To display the specific ONU distance information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
195
Mode
Example
The following example displays the specific ONU distance information:
ZXAN(config-if)#show gpon remote-onu distance gpon-onu_0/4/1:1
Eqd (bit)
Distance(m)
.......................................
336095
116
Related
Commands
None
show gpon remote-onu dot1x
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu dot1x gpon-onu_shelf/slot/olt:onu
To query the ONU 802.1x property
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
The following example displays how to query the ONU 802.1x property:
ZXAN(config)#show gpon remote-onu dot1x gpon-onu_0/3/1:1
Circuit ID profix:
Fllback policy:
allow
Auth server1:
Share secret:
Auth server2:
Share secret:
Auth server3:
Share secret:
Proxy:
0.0.0.0
Related
Commands
None
show gpon remote-onu dot1x ethuni
Syntax
Purpose
Usage Guidelines
196
show gpon remote-onu dot1x ethuni gpon-onu_shelf/slot/olt
:onu [eth_slot/port]
To query the ONU 802.1x property
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID and
ONU ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays how to query ONU 802.1x property:
ZXAN(config)#show gpon remote-onu dot1x ethuni gpon-onu_0/3/1:1
Port:
eth_0/1
Dot1x state:
disable
Direction:
both
Quiet period:
0
Timeout period:
30
Key Tx state:
disable
Auth PAE State:
N/A
Back end auth state:N/A
Ctrl port status:
N/A
Operate direction: N/A
Reauth period
0
Reauth status:
disable
Related
Commands
None
show gpon remote-onu ex-vlan
bridge-port uni
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu ex-vlan bridge-port uni gpon-onu_s
helf/slot/olt :onu [eth_slot/port]
To query the extension VLAN entity on UNI-side bridge port
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays how to query the extension VLAN
entity on UNI-sided bridge port:
ZXAN(config)#show gpon remote-onu ex-vlan bridge-port uni
gpon-onu_0/3/1:1
Uni:
eth_0/1
InputTPID:
0x9100
OutputTPID:
0x8a88
DownMode:
inverse-upstream
197
Related
Commands
None
show gpon remote-onu ex-vlan
bridge-port uplink
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu ex-vlan bridge-port uplink gpon-on
u_shelf/slot/olt :onu [uplink_slot/bridge/port]
To query the extension VLAN entity on uplink port
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
entity on uplink port:
ZXAN(config)#show gpon remote-onu ex-vlan bridge-port
uplink gpon-onu_0/3/1:1
Uplink:
uplink_0/1/1
InputTPID:
0x9100
OutputTPID:
0x8a88
DownMode:
inverse-upstream
Related
Commands
None
show gpon remote-onu ex-vlan eth
Syntax
Purpose
Usage Guidelines
Mode
198
show gpon remote-onu ex-vlan eth gpon-onu_shelf/slot/olt
To query the extension VLAN entity on ONU Ethernet port
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
Chapter 5 GPON
Example
entity on ONU Ethernet port:
ZXAN(config)#show gpon remote-onu ex-vlan eth gpon-onu_0/3/1:1
Uni:
eth_0/1
InputTPID:
0x8100
OutputTPID:
0x8a88
DownMode:
inverse-upstream
Related
Commands
None
show gpon remote-onu ex-vlan-table
bridge-port uni
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu ex-vlan-table bridge-port uni gpononu_shelf/slot/olt :onu [eth_slot/port]
To query the extension VLAN entity on UNI-side bridge port
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays how to query extension VLAN entity on UNI-sided bridge port:
ZXAN(config)#show gpon remote-onu ex-vlan-table
bridge-port uni gpon-onu_0/3/1:1
Uni:
eth_0/1
Filter:
zero-tag-rule
Treat:
1
Related
Commands
None
bridge-port uplink
Syntax
Purpose
Usage Guidelines
show gpon remote-onu ex-vlan-table bridge-port uplink
gpon-onu_shelf/slot/olt :onu [uplink_slot/bridge/port]
To query the extension VLAN entity on uplink port
199
Mode
Example
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, port ID,
bridge number
Range: 1 – 31
characters
entity on uplink port:
ZXAN(config)#show gpon remote-onu ex-vlan-table
bridge-port uplink gpon-onu_0/3/1:1
Uplink:
uplink_0/1/1
Filter:
zero-tag-rule
Treat:
1
Related
Commands
None
eth
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu ex-vlan-table eth gpon-onu_shelf/slo
t/olt :onu [eth_slot/port]
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
ZXAN(config)#show gpon remote-onu ex-vlan-table eth gpon-onu_0/3/1:1
Uni:
eth_0/1
Filter:
zero-tag-rule
Treat:
1
200
Chapter 5 GPON
Related
Commands
None
show gpon remote-onu interface ces
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interface ces gpon-onu_shelf/slot/olt
:onu [ces_slot/port]
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ces_slot/port
number, port ID
Range: 1 – 31
characters
ZXAN(config)#show gpon remote-onu interface ces gpon-onu_0/3/1:1
Interfece:
ces_0/1
Admin-state:
enable
Expect-type:
0
Loopback:
noloop
Dsl-framing:
extendsuper
Line-coding:
b8zs
Line-length:
0
Dsl-mode:
mode1
Arc:
0
Arc-interval
0
Line-type:
other
Related
Commands
None
show gpon remote-onu interface
dot1p-mapper eth
Syntax
Purpose
Usage Guidelines
show gpon remote-onu interface dot1p-mapper eth gpon-o
nu_shelf/slot/olt :onu [eth_slot/port]
To query the 802.1p mapping information on ONU Ethernet port
201
Mode
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID and
ONU ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
Example
None
Related
Commands
None
dot1p-mapper uplink
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interface dot1p-mapper uplink gpon
-onu_shelf/slot/olt :onu [uplink_slot/bridge/port]
To query the 802.1p mapping information on uplink port
Parameter
Description
Value
olt :onu
Shelf number, slot
number, OLT ID and
ONU ID
Range: 1 – 31
characters
ort
number, bridge
number, bridge port
ID
Range: 1 – 31
characters
The following example displays how to query the 802.1p mapping
information on uplink port:
ZXAN(config)#show gpon remote-onu interface dot
uplink gpon-onu_0/3/1:1 uplink_0/1/1
Interface:
uplink_0/1
Unmarkedframe:
defprio
DefPriority:
0
Related
Commands
None
show gpon remote-onu interface eth
Syntax
Purpose
Usage Guidelines
202
show gpon remote-onu interface eth gpon-onu_shelf/slot/olt
To display the specified Ethernet port configuration
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID and
ONU ID
Range: 1 – 31
characters
eth_slot/port
ONU slot number,
Ethernet port ID
Range: 1 – 31
characters
The following example displays the specified Ethernet port configuration:
ZXAN#show gpon remote-onu interface eth gpon-onu_0/3/1:1 eth_0/1
Interfece:
eth_0/1
Admin status: unlock
Operate status:N/A
Speed status: N/A
Arc:
0
Arc-interval
0
Expect-type:
0
Speed config: auto
Eth-loop:
noloop
Max-frame:
1518
Pause-time:
0
Wiring :
dce
BridgeOrIP:
either
PPPOE-filter: disable
Power-control: disable
Related
Commands
None
show gpon remote-onu interface pon
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interface pon gpon-onu_shelf/slot/olt
:onu [pon_slot/port]
To display the PON port configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
pon_slot/port
ONU slot number,
PON port ID
Range: 1 – 31
characters
The following example displays the specified PON port configuration:
ZXAN#show gpon remote-onu interface pon gpon-onu_0/3/1:1 pon_0/1
Interface:
pon_0/1
GEM-blocklen:
48 (bytes)
Sf-threshold:
5
Sd-threshold:
9
Arc:
disable
ArcInterval:
0
TotalTcontNum:
8
203
PiggybackDbaRptMode:
not support
WholeOnuDbaRptMode:
N/A
RxOpticalLevel:
0.000(dBm)
LowerRxOpticalThreshold:
ont internal
UpperRxOpticalThreshold:
ont internal
TxOpticalLevel:
0.000(dBm)
LowerTxOpticalThreshold:
ont internal
UpperTxOpticalThreshold:
ont internal
Onu response time:
0(ns)
Power feed voltage:
0.00(V)
Lower voltage threshold:
0.00(V)
Upper voltage threshold:
6.56(V)
Laser bias current:
0.000(mA)
Lower bias current threshold:0.000(mA)
Upper bias current threshold:131.000(mA)
Temperature:
0.000(C)
Lower temperature threshold: -127.000(C)
Upper temperature threshold: 127.000(C)
Related
Commands
policy
policy
policy
policy
None
show gpon remote-onu mac-filter
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu mac-filter gpon-onu_shelf/slot/olt:onu
{{ip-host hostId} | {uni eth_slot/port} | {uplink uplink_slot/br
idge/port}} [mac-address]
To display the ONU MAC filter configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ip-host hostId
Host ID
Range: 1 – 255
uni eth_slot/port
ONU slot number,
Ethernet port ID
Range: 1 – 31
characters
uplink uplink_slot/bri
dge/port
number, bridge
number, port ID
Range: 1 – 31
characters
mac-address
MAC address
XXXX.XXXX.XXXX
The following example displays the ONU MAC filter configuration:
ZXAN(gpon-onu-mng)#show gpon remote-onu mac-filter gpon-onu_0/4/1:1 uni eth_0/1
Interface:
eth_0/1
MAC-address:
1111.2222.3333
Filter mode:
discard
204
Chapter 5 GPON
Related
Commands
None
video
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interface video gpon-onu_shelf/slot/
olt:onu[video_slot/port]
To display the video port information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
video_slot/port
Video port, slot
number, port ID
Range: 1 – 31
characters
The following example displays video port information:
ZXAN#show gpon remote-onu interface video gpon-onu_0/3/1:1 video_0/1
interface admin-status arc arc-interval power-control operate status
.....................................................................
video_0/1 unlock
0
0
disable
NA
Related
Commands
None
show gpon remote-onu interwork
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interwork gpon-onu_shelf/slot/olt:onu
[gemport name]
To display the unicast interwork configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
gemport name
GEM port name
Range: 1 – 31
characters
The following example displays unicast interwork configuration:
ZXAN(gpon-onu-mng)#show gpon remote-onu interwork gpon-onu_0/3/1:1
gemport name : onu1-1;
205
interface :
eth_0/1;
operate status:enable;
type:
dot1p;
priority:
3 ;
max-payload:
1600
Related
Commands
None
show gpon remote-onu performance
bridge-port ip-host
Syntax
show gpon remote-onu performance bridge-port ip-host
gpon-olt_shelf/slot/oltIdOnuId [hostid]
Purpose
To query the ONU performance bridge port information as per IP
host
Usage Guidelines
Mode
Example
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 31
characters
OnuId
ONU ID
Range: 1 – 128
hostid
Host ID
Range: 1 – 255
The following example displays how to query the ONU performance
bridge port information as per IP host:
ZXAN(gpon-onu-mng)# show gpon remote-onu
performance bridge-port ip-host gpon-olt_0/4/1 1 1
HostId: 1
ForwardFrameCnt: 0.
DelayExceedDiscardCnt: 0.
MtuExceedDiscardCnt: 0.
RxFrameCnt: 0.
RxDiscardCnt: 0.
Related
Commands
None
bridge-port uni
Syntax
show gpon remote-onu performance [history] bridge-port
uni gpon-onu_shelf/slot/oltId:onuId [eth_slot/port]
Purpose
To query the UNI interface performance statistics on ONU bridgeport
Usage Guidelines
206
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
history
Display statistics in
previous 15 minutes
-
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
Uni port ID, slot
number, port ID
Range: 1 – 31
characters
The following example displays how to query the UNI interface
performance statistic on ONU bridge-port:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance
bridge-port uni gpon-onu_0/4/1:1
InterfaceName:
eth_0/1
ForwardFrameCnt:
0
DelayExceedDiscardCnt: 0
MtuExceedDiscardCnt:
0
RxFrameCnt:
0
RxDiscardCnt:
0
Threshold profile:
none
Related
Commands
None
bridge-port uplink
Syntax
show gpon remote-onu performance [history] bridge-port
uplink gpon-onu_shelf/slot/oltId:onuId [uplink_slot/bridge/port]
Purpose
To query the uplink interface performance statistic on ONU bridgeport
Usage Guidelines
Mode
Example
Parameter
Description
Value
history
previous 15 minutes
-
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
The following example displays how to query Uplink interface performance statistic on ONU bridge-port:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance
207
bridge-port uplink gpon-onu_0/4/1:1
InterfaceName:
ForwardFrameCnt:
DelayExceedDiscardCnt:
MtuExceedDiscardCnt:
RxFrameCnt:
RxDiscardCnt:
Threshold profile:
Related
Commands
uplink_0/1/1
0
0
0
0
0
none
None
ces
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance ces [history] gpon-onu
_shelf/slot/oltId:onuId [ces_slot/port]
To query the ONU call controller information
Parameter
Description
Value
history
Display statistics of
last 15 minutes
-
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ces_slot/port
CES port ID, slot
number, port ID
Range: 1 – 31
characters
None
ZXAN(gpon-onu-mng#show gpon remote-onu performance ces gpon-onu_0/4/1:1
Related
Commands
None
eth
Syntax
show gpon remote-onu performance eth [history] [detail
ed] gpon-onu_shelf/slot/oltId:onuId [eth_slot/port]
Purpose
To query the current or history performance statistics on ONU Ethernet port
Usage Guidelines
208
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
history
Display statistics of
last 15 minutes
-
detailed
Display detailed
statistics
-
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays how to query the current or history
performance statistics on ONU Ethernet port:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance eth detailed
gpon-onu_0/4/1:1
InterfaceName:eth_0/1
Rx:
Octets:
0(B)
Packets:
196608
Broadcast: 196608
Multicast: 0
Undersize: 0
64 :
0
128-255:
0
512-1023:
0
Fragments:
0
Jabbers:
0
FcsErrors:
FrameTooLongs:
BufferOverflows:
AlignmentErrCnt:
PPPoE filtered:
Drop events:
InternalMacErrCnt:
Tx:
ExcessiveCollisionCnt:
LateCollisionCnt:
BufferOverflows:
SingleCollisionCnt:
MultiCollisionCnt:
SqeCnt:
DeferredCnt:
CarrierSenseErrCnt:
InternalMacErrCnt:
Threshold profile:
65-127:
0
256-511: 32769
1024-1518:0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
none
209
Related
Commands
None
gem
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance [history] gem gpon-onu
shelf/slot/oltId:onuId [gemPortId]
To query the ONU GEM performance statistics
Parameter
Description
Value
history
previous 15 minutes
-
gpon-onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
gemPortId
GEM port ID
Range: 1 – 31
characters
The following example displays how to query the ONU GEM performance statistics:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance gem gpon-onu_0/4/1:1
GEM port index:
1
Lost packets:
0
MisInserted packets: 0
Rx packets:high32bit:0
Rx blocks:high32bit: 0
Tx blocks:high32bit: 0
Impaired blocks:
0
Threshold profile
none
Related
Commands
Low32bit: 0
Low32bit: 0
Low32bit: 0
None
mac-bridge
Syntax
Purpose
Usage Guidelines
210
show gpon remote-onu performance mac-bridge gpon-olt_s
helf/slot/oltId OnuId [bridge_slot/bridge]
To query the ONU MAC bridge performance statistics
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
OnuId
ONU ID
Range: 1 – 128
bridge_slot/bridge
MAC bridge
Range: 1 – 255
characters
The following example displays how to query ONU MAC bridge performance statistic:
ZXAN(gpon-onu-mng)#$emote-onu performance mac-bridge gpon-olt_0/4/1 1
BridgeName:bridge_0/1.
LearnEntryDiscardFrames: 0.
Related
Commands
None
ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance ip-host gpon-olt_shelf/
slot/oltId OnuId [hostid]
To query the ONU host performance statistics
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
OnuId
ONU ID
Range: 1 – 128
hostid
Host ID
Range: 1 – 255
The following example displays how to query the ONU host performance statistics:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance ip-host
gpon-olt_0/4/1 1
HostId ICMPErrors DNSErrors
----------------------------1
0
0
211
Related
Commands
None
call-ctrl
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance call-ctrl gpon-olt_shelf
/slot/oltId OnuId [pots_slot/port]
To query the ONU call controller information
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
OnuId
ONU ID
Range: 1 – 128
pots_slot/port
Call controller code
Range: 1 – 255
characters
The following example displays how to query the ONU call controller information:
ZXAN(gpon-onu-mng)# show gpon remote-onu performance call-ctrl
gpon-olt_0/4/1 1
InterfaceName:pots_0/1.
CallSetupFailures:0.
CallSetupTimert: 0.
CallTerminateFailures: 0.
AnalogPortReleases: 0.
AnalogPortOffHookTimer: 0.
Related
Commands
None
rtp
Syntax
Purpose
Usage Guidelines
212
show gpon remote-onu performance rtp gpon-olt_shelf/slot/
oltId OnuId [pots_slot/port]
To query the ONU POTS RTP performance statistics
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
OnuId
ONU ID
Range: 1 – 128
pots_slot/port
POTS port code
Range: 1 – 255
The following example displays how to query the ONU POTS RTP
performance statistic:
ZXAN(gpon-onu-mng)#show gpon remote-onu performance rtp gpon-olt_0/4/1 1
InterfaceName:
pots_0/1.
RtpErrors:
14443.
PktLoss:
4286578688.
MaxJitter:
371946896.
MaxTimeBtwRtpPkts: 4294967295.
BufUnderflows:
2296769322.
BufOverflows:
2023522463.
Related
Commands
None
sip-call-init
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance sip-call-init gpon-olt_s
helf/slot/oltId OnuId [sip-agent-id]
To query the ONU SIP agent call statistics
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
OnuId
ONU ID
Range: 1 – 128
sip-agent-id
SIP agent ID
Range: 1 – 65,535
The following example displays how to query the ONU SIP agent
call statistic:
ZXAN(gpon-onu-mng)# show gpon remote-onu performance sip-call-init
gpon-olt_0/4/1 1
AgentId:
ConnectFailures:
ValidateFailures:
TimeoutCnt:
RxFailures:
1.
0.
0.
0.
0.
213
Related
Commands
None
show gpon remote-onu
power-shedding
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu power-shedding gpon-onu_shelf/slot
/olt:onu
To display the ONU power shedding configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
The following example displays ONU power shedding configuration:
ZXAN(config)#show gpon remote-onu power-shedding gpon-onu_0/3/1:1
Restore power timer reset interval
0s
Data shedding interval
disable
Voice shedding interval
disable
Video overlay shedding interval
disable
Video return shedding interval
disable
DSL shedding interval
disable
ATM shedding interval
disable
CES shedding interval
disable
Frame shedding interval
disable
Sonet shedding interval
disable
Shedding status:
Data class
restore
Voice class
restore
Video overlay class
restore
Video return class
restore
DSL class
restore
ATM class
restore
CES class
restore
Frame class
restore
Sonet class
restore
Related
Commands
None
show gpon remote-onu pre-filter uni
Syntax
show gpon remote-onu pre-filter gpon-onu_shelf/slot/olt:onu
uni eth_slot/port
Purpose
To display the protocol filter configuration on UNI-side bridge port
Usage Guidelines
214
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays the protocol filter configuration on
UNI-side bridge port:
ZXAN(config)#show gpon remote-onu pre-filter gpon-onu_0/3/1:1 uni eth_0/1
Interface:
eth_0/1
IPv4multicast :forward
IPv6multicast: forward
IPv4broadcast: forward
Rarp:
forward
IPx :
forward
NetBEUI:
forward
AppleTalk:
forward
bpdu :
forward
Arp :
forward
PPPOE :
forward
Related
Commands
None
show gpon remote-onu pre-filter
uplink
Syntax
uplink uplink_slot/bridge/port
Purpose
To display the protocol filter configuration on uplink-side bridge
port
Usage Guidelines
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
The following example displays the protocol filter configuration on
uplink-side bridge port:
ZXAN(config)#show gpon remote-onu pre-filter gpon-onu_0/3/1:1 uplink uplink_0/1/1
Interface:
uplink_0/1/1
Rarp:
forward
IPx :
forward
NetBEUI:
forward
AppleTalk:
forward
bpdu :
forward
Arp :
forward
PPPOE :
forward
215
Related
Commands
None
show gpon remote-onu pw
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu pw gpon-onu_shelf/slot/oltId:onuId
[ces_slot/port]
To query the ONU PW service configuration
Parameter
Description
Value
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ces_slot/port
CES port ID, slot
number, port ID
Range: 1 – 31
characters
The following example displays how to query the ONU PW service
configuration:
ZXAN(config)# show remote onu pw gpon-onu_0/12/1:1 ces_0/1
Interfece:
pw-configure-state:
bridge:
src-mac:
dst-mac:
loopback:
tx-payload-ecid:
tx-signalling-ecid
expected-payload-ecid:
expected-signalling-ecid:
recv-payload-ecid:
recv-signalling-ecid:
tag-policy:
priority:
vid:
near-end-ip:
host:
far-end-ip:
payloadsize:
payload-delay:
timing-mode:
pw-profile:
payload-ssrc:
signalling-ssrc:
payload-ptype:
signalling-ptype:
expected-payload-ssrc:
expected-siganlling-ssrc:
expected-payload-ptype:
expected-signalling-ptype:
clock-reference:
rtp-ts-mode:
service-type:
signallling:
arc:
arc-interval:
216
ces_0/1
active
bridge_0/1
0000.0000.0000
0015.eb72.0000
disable
1102
0
1102
0
0
0
tag
4
133
0
0
32
1
differential-timing
3
0
96
0
0
0
96
0
1
differential
basic-unstructure
no-signalling
0
0
Chapter 5 GPON
Related
Commands
None
up-queue-map
Syntax
show gpon remote-onu up-queue-map uni gpon-onu_shelf/s
lot/olt:onu [eth_slot/port]
show gpon remote-onu up-queue-map uplink gpon-onu_she
lf/slot/olt:onu [uplink_slot/bridge/port]
Purpose
Usage Guidelines
Mode
Example
To query the mapping relationship between 802.1p service on UNI
or MAC bridge uplink port and upstream priority queue
Parameter
Description
Value
oltId:onuId
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
The following example displays how to query the mapping relationship between 802.1p service on UNI or MAC bridge uplink port
and upstream priority queue:
ZXAN(gpon-onu-mng)#show gpon remote-onu up-queue-map
PortName
Priority :Queue
-------------------------------------------------uplink_0/1/2
0:null 1:1 2:null
3:null 4:null 5:null 6:null 7:null
Related
Commands
None
show gpon remote-onu vlan-filter uni
Syntax
Purpose
Usage Guidelines
show gpon remote-onu vlan-filter uni gpon-onu_shelf/slot/ol
t:onu [eth_slot/port]
To display the UNI port VLAN filter parameters
217
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays UNI port VLAN filter parameters:
ZXAN(config)#show gpon remote-onu vlan-filter uni gpon-onu_0/3/1:1
Interface
Priority
Vlan ID
....................................
eth_0/1
0
100
Related
Commands
None
show gpon remote-onu vlan-filter
uplink
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-filter uplink gpon-onu_shelf/slo
t/olt:onu [uplink_slot/bridge/port]
To display the uplink port VLAN filter parameters
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
The following example displays the uplink port VLAN filter parameters:
ZXAN(gpon-onu-mng)#show gpon remote-onu
vlan-filter uplink gpon-onu_0/3/1:1
Interface
Priority
Vlan ID
...................................
uplink_0/1/1
0
100
218
Chapter 5 GPON
Related
Commands
None
vlan-filter-mode uni
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-filter-mode uni gpon-onu_shelf
/slot/olt:onu [eth_slot/port]
To display the UNI port VLAN filter mode
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays the UNI port VLAN filter mode:
ZXAN(config)#show gpon remote-onu vlan-filter-mode uni gpon-onu_0/3/1:1
Interface Name: eth_0/1
Tag-filter:
vid-filter
Untag-filter:
discard
Related
Commands
None
vlan-filter-mode uplink
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-filter-mode uplink gpon-onu_s
helf/slot/olt:onu [uplink_slot/bridge/port]
To display the uplink port VLAN filter mode
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
ort
number, bridge
number, port ID
Range: 1 – 31
characters
The following example displays the uplink port VLAN filter mode:
219
vlan-filter-mode
Interface Name:
Tag-filter:
Untag-filter:
Related
Commands
uplink_0/1/1
vid-filter
discard
None
show gpon remote-onu vlan-tag uni
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-tag uni gpon-onu_shelf/slot/olt
To display the UNI port VLAN property
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
eth_slot/port
number, port ID
Range: 1 – 31
characters
The following example displays UNI port VLAN property:
ZXAN(config)#show gpon remote-onu vlan-tag uni gpon-onu_0/3/1:1
Interface
Up-mode
Up-priority
Up-vlan
Down-mode
..................................................................
eth_0/1
add-pvid
0
100
delete-pvid
Related
Commands
None
show onu running config
Syntax
Purpose
Usage Guidelines
Mode
Example
show onu running config gpon-onu_shelf/slot/olt:onu
To display the all configuration information on ONU remote management interface
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
The following example displays all configuration information on
ONU remote management interface:
ZXAN(config)#show onu running config gpon-onu_0/3/1:1
pon-onu-mng gpon-onu_0/3/1:1
vlan-tag uni eth_0/1 up-mode add-pvid
220
Chapter 5 GPON
up-prio 0 up-vid 100 down-mode delete-pvid
interwork gemport 1 dot1p-bridge uplink_0/1/1 prio-list 0,1,2,3,4,5,6,7
bridge-port uni-bind eth_0/1 bridge_0/1
bridge-port uni eth_0/1 path-cost 100
bridge-port uni eth_0/1 stp false
bridge-port uni eth_0/1 lan-fcs discard
vlan-filter-mode uni eth_0/1 tag-filter vid-filter untag-filter discard
vlan-filter uni eth_0/1 priority 0 vid 100
bridge-port uplink uplink_0/1/1 path-cost 100
bridge-port uplink uplink_0/1/1 stp false
bridge-port uplink uplink_0/1/1 lan-fcs discard
Related
Commands
None
VoIP Management
Commands
bridge-port host-bind
Syntax
bridge-port host-bind hostid bridge_slotno/bridge-port
no bridge-port host-bind hostid
Purpose
Usage Guidelines
Mode
Example
To bind host to a specific bridge port
Parameter
Description
Value
hostid
Host ID
Range: 1 – 255
-port
Bridge port number
Range: 1 – 31
characters
ZXAN(gpon-onu-mng)#
The following example displays how to bind host to a specific bridge
port:
ZXAN(gpon-onu-mng)#bridge-port host-bind 1 bridge_0/1
Related
Commands
None
bridge-port ip-host
Syntax
Purpose
Usage Guidelines
bridge-port ip-host hostid [encap-method {atmvc | llc}] [lan
-fcs {forward | discard}] [path-cost path-cost] [priority prio
rity] [stp {true | false}]
To configure the bridge port property at IP host side
221
Mode
Example
Parameter
Description
Value
hostid
Host ID
Range: 1 – 255
encap-method
{atmvc | llc}
Encapsulation method
-
lan-fcs {forward |
discard}
Local network
-
path-cost path-cost
Path cost
Range: 0 – 65,535
priority priority
Priority
Range: 0 – 65,535
stp {true | false}
Spanning tree
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the bridge port
property at IP host side:
ZXAN(gpon-onu-mng)#bridge-port ip-host 1 encap-method
llc lan-fcs discard path-cost 100 priority 0 stp false
Related
Commands
None
interface pots admin-state
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port admin-state {lock | unlock}
To configure the POTS interface admin state property
Parameter
Description
Value
pots_slotno/port
port number
Range : 1 – 31
characters
lock
Administratively lock
-
unlock
Administratively
unlock
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface admin state property:
lock
unlock
ZXAN(gpon-onu-mng)#
222
Chapter 5 GPON
Related
Commands
None
interface pots arc
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port arc arc arc-interval arc-interval
To configure the POTS interface ARC property
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
arc
ARC, 0 means disable
and 1 means enable
Range: 0 – 1
arc-interval
arc-interval
ARC interval
Range: 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface ARC property:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 arc 1
arc-interval 10
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots impedance
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port impedance impedance
To configure the POTS interface impedance property
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
impedance
impedance
Impedance
Range: 0 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface impedance property:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 impedance 100
223
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots rx-gain
Syntax
interface pots pots_slotno/port rx-gain rx-gain
Purpose
To configure the POTS interface RX gain property
Usage Guidelines
Mode
Example
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
rx-gain
RX gain range from
-12 to 6, precision is
0.1 and unit is dB
Range: 1 – 5
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface RX gain property:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 rx-gain 4
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots tx-gain
Syntax
interface pots pots_slotno/port tx-gain tx-gain
Purpose
To configure the POTS interface TX gain property
Usage Guidelines
Mode
Example
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
tx-gain
TX gain range from -6
to 12, precision is 0.1
and unit is dB
Range: 1 – 5
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface TX gain property:
ZXAN(gpon-onu-mng)#interface pots pots_0/1 tx-gain 4
224
Chapter 5 GPON
ZXAN(gpon-onu-mng)#
Related
Commands
None
interface pots tx-path
Syntax
Purpose
Usage Guidelines
Mode
Example
interface pots pots_slotno/port tx-path {fulltimeOnHook |
parttimeOnHook}
To configure the POTS interface TX path property
Parameter
Description
Value
pots_slotno/port
port number
Range: 1 – 31
characters
fulltimeOnHook
Full time On Hook
-
parttimeOnHook
Part time On Hook
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the POTS interface TX path property:
fulltimeOnHook
parttimeOnHook
ZXAN(gpon-onu-mng)#
Related
Commands
None
ip-host dhcp-enable
Syntax
Purpose
Usage Guidelines
ip-host host-id dhcp-enable {false | true} ping-response
{false | true} traceroute-response {false | true}
To configure the ONU ID and DHCP parameters
Parameter
Description
Value
host-id
ONU host ID
Range: 1 – 255
ping-response
Ping response
-
traceroute-respo
nse
Trace route response
-
225
Mode
Example
Parameter
Description
Value
false
DHCP enable, ping
response, trace route
response false
-
true
DHCP enable, ping
response, trace route
response true
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONU ID and
DHCP parameters:
ZXAN(gpon-onu-mng)#ip-host 1 dhcp-enable false
ping-response false traceroute-response false
ZXAN(gpon-onu-mng)#
Related
Commands
None
ip-host id
Syntax
Purpose
Usage Guidelines
Mode
Example
ip-host host-id id id
To configure the ONU host and ID
Parameter
Description
Value
host-id
ONU host ID
Range: 1 – 255
id id
ONU ID
Range: 0 – 25
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONU host and
ID:
ZXAN(gpon-onu-mng)#ip-host 1 id test
ZXAN(gpon-onu-mng)#
Related
Commands
None
ip-host ip
Syntax
Purpose
Usage Guidelines
226
ip-host host-id ip ip-address mask mask [gateway gateway]
To configure the ONU IP address, mask and gateway IP addresses
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
host-id
ONU host ID
Range: 1 – 255
ip ip-address
ONU IP address
A.B.C.D
mask mask
ONU mask IP address
A.B.C.D
gateway gateway
ONU gateway IP
address
A.B.C.D
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONU IP address, mask and gateway IP addresses:
ZXAN(gpon-onu-mng)# ip-host 1 ip 10.1.1.1 mask
255.255.255.0 gateway 10.61.54.254
ZXAN(gpon-onu-mng)#ip-host 1 primary-dns 10.10.12.1
second-dns 10.45.12.1
ZXAN(gpon-onu-mng)#
Related
Commands
None
ip-host primary-dns
Syntax
ip-host host-id primary-dns ip-address [second-dns ip-addre
ss]
Purpose
To configure the ONU host ID and primary/secondary DNS IP address(es)
Usage Guidelines
Mode
Example
Parameter
Description
Value
host-id
ONU host ID
Range: 1 – 255
ip-address
Primary DNS IP
address
A.B.C.D
second-dns
ip-address
Second DNS IP
address
A.B.C.D
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONU host ID
and primary/secondary DNS IP addresses:
second-dns 10.45.12.1
ZXAN(gpon-onu-mng)#
227
Related
Commands
None
mac-filter ip-host
Syntax
mac-filter ip-host hostid macaddress {discard | forward}
no mac-filter interface-name macaddress
Purpose
Usage Guidelines
Mode
Example
To configure the MAC filter information
Parameter
Description
Value
hostid
IP host ID
Range: 1 – 255
macaddress
MAC address
XXXX.XXXX.XXXX
discard
Discard
-
forward
Forward
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the MAC filter
information:
ZXAN(gpon-onu-mng)#mac-filter ip-host 1 1111.1111.1111 discard
Related
Commands
None
performance bridge-port ip-host
Syntax
Purpose
Usage Guidelines
Mdde
Example
performance bridge-port ip-host ip-host-id {start | stop}
To start/stop the bridge-port host performance statistics
Parameter
Description
Value
ip-host-id
Bridge port host ID
Range: 1 – 255
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the bridge-port host
ZXAN(gpon-onu-mng)#performance bridge-port ip-host 100 start
228
Chapter 5 GPON
Related
Commands
None
performance call-ctrl
Syntax
performance call-ctrl pots_slot/port {start | stop}
Purpose
To start/stop the call-controller performance statistics
Usage Guidelines
Mode
Example
Parameter
Description
Value
pots_slot/port
port number
Range: 1 – 255
characters
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the call-controller performance statistics:
ZXAN(gpon-onu-mng)#performance call-ctrl pots_0/1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
performance iphost host-id {start | stop}
To start/stop the IP host performance-statistics
Parameter
Description
Value
host-id
IP host ID
Range: 1 – 255
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the IP host performance-statistics:
ZXAN(gpon-onu-mng)#performance ip-host 100 start
ZXAN(gpon-onu-mng)#
229
Related
Commands
None
performance rtp
Syntax
Purpose
Usage Guidelines
Mode
Example
performance rtp pots_slot/port {start | stop}
To start/stop the POTS interface RTP performance statistics
Parameter
Description
Value
pots_slot/port
port number
Range: 1 – 255
characters
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the POTS interface
RTP performance statistics:
ZXAN(gpon-onu-mng)#performance rtp pots_0/1 start
ZXAN(gpon-onu-mng)#
Related
Commands
None
performance sip-call-init
Syntax
Purpose
Usage Guidelines
Mode
Example
performance sip-call-init sip-agent-id {start | stop}
To start/stop the SIP agent statistics
Parameter
Description
Value
sip-agent-id
SIP agent ID
Range: 1 – 65535
start
Start statistics
-
stop
Stop statistics
-
ZXAN(gpon-onu-mng)#
The following example displays how to start the SIP agent performance statistics:
ZXAN(gpon-onu-mng)#performance sip-call-init 1 start
ZXAN(gpon-onu-mng)#
230
Chapter 5 GPON
Related
Commands
None
pre-filter ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
pre-filter ip-host hostid [appleTalk {discard | forward}] [arp
{discard | forward}] [bpdu {discard | forward}] [ipv4broa
dcast {discard | forward}] [ipv4multicast {discard | forwar
d}] [ipv6multicast {discard | forward}] [ipx {discard | forw
ard}] [netBEUI {discard | forward}] [pppoe {discard | forw
ard}] [rarp {discard | forward}]
To configure the pre-filter parameters
Parameter
Description
Value
hostid
IP host ID
Range: 1 – 255
discard
Discard
-
forward
Forward
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the pre-filter parameters:
ZXAN(gpon-onu-mng)#pre-filter ip-host 1 arp discard pppoe forward
Related
Commands
None
sip-agent proxy-server
Syntax
sip-agent agent-id proxy-server {IP | URL} [outbound-proxy
{IP | URL}] primary-dns address [secondary-dns address]
tcpudp-port tcp-udp-port [host host-id]
no sip-agentagent-id
Purpose
Usage Guidelines
To configure the SIP agent
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65535
IP | URL
Proxy server
Range: 0 – 128
outbound-proxy {IP
| URL}
Out bound proxy
Range: 0 – 128
primary-dns address
Primary DNS IP
address
A.B.C.D
231
Mode
Example
Parameter
Description
Value
secondary-dns
address
Secondary DNS IP
address
A.B.C.D
tcpudp-port
tcp-udp-port
TCP and UDP port
Range: 0 – 65535
host host-id
Host ID
Range: 1 – 255
ZXAN(gpon-onu-mng)#
The following example displays how to configure the SIP agent:
ZXAN(gpon-onu-mng)#sip-agent 1 proxy-server 1.1.1.1 outbound-proxy
2.2.2.2 primary-dns 3.3.3.3 tcpudp-port 100
Related
Commands
None
sip-agent reg-exptime
Syntax
Purpose
Usage Guidelines
Mode
Example
sip-agent agent-id reg-exptime reg-exp-time [rereg-startt
ime time]
To configure the SIP agent register expiry time
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65,535
reg-exp-time
Register expiry time
Range: 0 –
42,949,672,955
seconds
rereg-starttime
time
Re-register start time
Range: 0 –
42,949,672,955
seconds
ZXAN(gpon-onu-mng)#
The following example displays how to configure the SIP agent
register expiry time:
ZXAN(gpon-onu-mng)#sip-agent 1 reg-exptime 100 rereg-starttime 100
Related
Commands
None
sip-agent registrar-server
Syntax
232
sip-agent agent-id registrar-server {IP | URL}
Chapter 5 GPON
Purpose
Usage Guidelines
Mode
Example
To specify the SIP agent registrar server
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65,535
{IP | URL}
Registrar server
Range: 0 – 128
characters
ZXAN(gpon-onu-mng)#
The following example displays how to specify the SIP agent registrar server:
ZXAN(gpon-onu-mng)#sip-agent 1 registrar-server 10.1.1.1
Related
Commands
None
sip-agent rereg-starttime
Syntax
Purpose
Usage Guidelines
Mode
Example
sip-agent agent-id rereg-starttime time
To configure the SIP agent re-register start time
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65,535
time
Re-register start time
Range: 0 –
42,949,672,955
seconds
ZXAN(gpon-onu-mng)#
re-register start time:
ZXAN(gpon-onu-mng)#sip-agent 1 rereg-starttime 1223
Related
Commands
None
sip-agent ss
Syntax
Purpose
Usage Guidelines
sip-agent agent-id ss softswitch-vendor
To configure the SIP agent SS vendor
233
Mode
Example
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65,535
softswitch-vendor
SS vendor
Range: 0 – 4
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the SIP agent SS
vendor:
ZXAN(gpon-onu-mng)#sip-agent 1 ss ZTE
Related
Commands
None
sip-agent validate
Syntax
sip-agent agent-id validate {disable | md5 | basic} [usern
ame name password password] [realm realm]
Purpose
To configure the SIP agent authentication mode and relevant parameters
Usage Guidelines
Mode
Example
Parameter
Description
Value
agent-id
Agent ID
Range: 0 – 65,535
disable | md5 |
basic
Authentication mode
-
username name
User name
Range: 0 – 128
characters
password password
Password
Range: 0 – 25
characters
realm realm
Realm
Range: 0 – 25
characters
ZXAN(gpon-onu-mng)#
authentication mode and relevant parameters:
ZXAN(gpon-onu-mng)#sip-agent 1 proxy-server 1.1.1.1
outbound-proxy 2.2.2.2 primary-dns 3.3.3.3 tcpudp-port 100
ZXAN(gpon-onu-mng)#sip-agent 1 rereg-starttime 1223
ZXAN(gpon-onu-mng)#sip-agent 1 ss ZTE
234
Chapter 5 GPON
Related
Commands
None
sip-user
Syntax
sip-user pots_slot/port [dial-plan dialplan-id]
sip-user pots_slot/port [feature-code feature-code]
sip-user pots_slot/port [release-time time] [roh-time time]
sip-user pots_slot/port [roh-time time]
sip-user pots_slot/port [service-profile profile-id] [feature-code
feature-code]
sip-user pots_slot/port sip-agent agent-id user-aor aor [displa
y-name name] [username username password userpassword]
sip-user pots_slot/port [vmail-exptime time] [release-time
time][roh-time time]
sip-user pots_slot/port [vmail-server iporurl] [release-time
time][roh-time time] [vmail-exptime time]
sip-user pots_slot/port vmail-validate {basic| disable| md5}
[vmail-realm realm] [vmail-username name vmail-password
password [vmail-realm realm]]
no sip-user pots_slot/port
Purpose
Usage Guidelines
To configure the SIP user
Parameter
Description
Value
pots_slot/port
port number
Range: 0 – 31
dial-plan dialplan-id
Dial plan ID
Range: 1 – 63
characters
feature-code
feature-code
Feature code
Range: 0 – 65535
release-time time
Release time
Range: 0 – 255
seconds
roh-time time
ROH time
Range: 0 – 255
seconds
service-profile
profile-id
Service profile ID
Range: 0 – 65535
sip-agent agent-id
SIP agent ID
Range: 0 – 65535
user-aor aor
User AOR ID
Range: 0 – 128
characters
display-name name
Out bound proxy
Range: 0 – 25
characters
235
Mode
Example
Parameter
Description
Value
username username
Username
Range: 0 – 25
characters
password
userpassword
User Password
Range: 0 – 25
characters
vmail-exptime time
VMAIL expire time
Range: 0 –
42949672955
seconds
vmail-server iporurl
VMAIL server IP or
URL
Range: 0 – 128
characters
vmail-validate
VMAIL validate
–
disable
Disable
-
md5
MD5
–
basic
Basic
–
vmail-realm realm
VMAIL realm
Range: 0 – 25
characters
vmail-username
name
VMAIL user name
Range: 0 – 25
characters
vmail-password
password
VMAIL password
Range: 0 – 25
characters
ZXAN(gpon-onu-mng)#
The following example displays how to configure the SIP user:
ZXAN(gpon-onu-mng)#sip-user pots_0/1
ZXAN(gpon-onu-mng)#sip-user pots_0/1 dial-plan 1
ZXAN(gpon-onu-mng)#sip-user pots_0/1 feature-code
10
ZXAN(gpon-onu-mng)#sip-user pots_0/1 release-time
100
ZXAN(gpon-onu-mng)#sip-user pots_0/1 release-time
100 roh-time 100
ZXAN(gpon-onu-mng)#sip-user pots_0/1 roh-time 100
ZXAN(gpon-onu-mng)#sip-user pots_0/1 service-profile
1
ZXAN(gpon-onu-mng)#sip-user pots_0/1 service-profile
1 feature-code 10
ZXAN(gpon-onu-mng)#sip-user pots_0/1 sip-agent 1 user-aor
1
ZXAN(gpon-onu-mng)#sip-user pots_0/1 sip-agent 1 user-aor
1 display-name test
ZXAN(gpon-onu-mng)# sip-user pots_0/1 sip-agent 1 user-aor
1 username test password 123456
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-exptime 100
release-time 100
roh-time 100
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-server 1.1.1.1
release-time 100
roh-time 100
236
Chapter 5 GPON
vmail-exptime 100
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-validate basic
vmail-realm 10
vmail-username test vmail-password 123456
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-validate disable
vmail-realm 10
ZXAN(gpon-onu-mng)# sip-user pots_0/1 vmail-validate disable
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-validate md5
ZXAN(gpon-onu-mng)#sip-user pots_0/1 vmail-validate md5
vmail-realm 10
ZXAN(gpon-onu-mng)# sip-user pots_0/1 vmail-validate md5
ZXAN(gpon-onu-mng)#
Related
Commands
None
vlan-filter ip-host
Syntax
vlan-filter ip-host hostid priority priority vid vid
no vlan-filter ip-host hostid priority priority vid vid
Purpose
Usage Guidelines
Mode
Example
To create the ONU IP host VLAN filter
Parameter
Description
Value
hostid
IP host ID
Range: 1 – 255
priority priority
Priority
Range: 0 – 7
vid vid
VLAN ID
Range: 1 – 4094
ZXAN(gpon-onu-mng)#
The following example displays how to create the ONU IP host
VLAN filter:
ZXAN(gpon-onu-mng)#vlan-filter ip-host 1 priority 0 vid 10
Related
Commands
None
vlan-filter-mode ip-host
Syntax
vlan-filter-mode ip-host hostid tag-filter {transparent | disc
ard | prio-filter | vid-filter | prio-vid-filter} untag-filter {tra
nsparent | discard}
no vlan-filter-mode ip-host hostid
Purpose
Usage Guidelines
To create the ONU IP host VLAN filter mode
237
Mode
Mode
Parameter
Description
Value
hostid
IP host ID
Range: 1 – 255
tag-filter
Tag filter mode
-
untag-filter
Untag filter mode
-
transparent
Transparent mode
-
discard
Discard
-
prio-filter
Priority filter
-
vid-filter
VLAN ID filter
-
prio-vid-filter
Priority VLAN ID filter
-
ZXAN(gpon-onu-mng)#
The following example displays how to create the ONU IP host
VLAN filter mode
ZXAN(gpon-onu-mng)#vlan-filter-mode ip-host 1
Related
Commands
None
vlan-tag ip-host
Syntax
vlan-tag ip-host hostid down-mode {transparent | untag |
delete-pvid} [up-mode {transparent | overwrite | add | addpvid}] [up-prio priority up-vid vlanid]
vlan-tag ip-host hostid up-mode {transparent | overwrite |
add | add-pvid} [down-mode {transparent | untag | delete
-pvid}] [up-prio priority up-vid vlanid]
vlan-tag ip-host hostid up-prio priority up-vid vlanid [up-m
ode {transparent | overwrite | add | add-pvid}] [down-m
ode {transparent | untag | delete-pvid }]
no vlan-tag ip-host hostid
Purpose
Usage Guidelines
238
To configure the ONT IP host VLAN property
Parameter
Description
Value
hostid
IP host ID
Range: 1 – 255
up-mode
Upstream mode:
-
�
transparent
�
overwrite
�
add
�
add-pvid
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
priority
Upstream priority
Range: 0 – 7
vlanid
Upstream VLAN ID
Range: 1 – 4094
down-mode
Downstream mode:
-
�
transparent
�
untag
�
delete-pvid
transparent
Transparent mode
–
untag
Untag mode
–
delete-pvid
Delete PVLAN ID
–
overwrite
Overwrite
–
add
Add
–
add-pvid
Add PVLAN ID
–
up-prio
Upstream priority
–
up-vid
Upstream VLAN ID
–
ZXAN(gpon-onu-mng)#
The following example displays how to configure the ONT IP host
VLAN property:
ZXAN(gpon-onu-mng)#vlan-tag ip-host 1 up-mode transparent
Related
Commands
None
voip-ctp
Syntax
voip-ctp pots_slotno/port [media-profile profile-name | signal
{coin-fist | dial-tone-first | groud-start | loop-reverse-batt
ery | loop-start | multi-party}}
no voip-ctp pots_slotno/port
Purpose
Usage Guidelines
To configure the VoIP CTP
Parameter
Description
Value
pots_slotno/port
port number
Range: 0 – 31
characters
media-profile
profile-name
VoIP CTP media profile
name
Range: 1 – 63
characters
239
Mode
Example
Parameter
Description
Value
signal
signal
-
coin-fist
Coin fist
-
dial-tone-first
Dial tone first
-
groud-start
Groud start
-
loop-reverse-batt
ery
Loop reverse battery
-
loop-start
Loop start
-
multi-party
Multi party
-
ZXAN(gpon-onu-mng)#
The following example displays how to configure the VoIP CTP:
ZXAN(gpon-onu-mng)#voip-ctp pots_0/1 signal
coin-fist
ZXAN(gpon-onu-mng)#
Related
Commands
None
host-bind
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu bridge-port host-bind gpon-onu_she
lf/slot/olt:onu [hostid]
To display the ONU IP host bindingMAC bridge port information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
hostid
Host ID
Range: 1 – 255
The following example displays ONU IP host bound MAC bridge
port information:
ZXAN(config)#show gpon remote-onu bridge-port host-bind gpon-onu_0/3/1:1
Host ID
Interface
..........................
1
bridge_0/1
240
Chapter 5 GPON
Related
Commands
None
ip-host
Syntax
show gpon remote-onu bridge-port ip-host gpon-onu_shelf/
slot/olt:onu [hostid]
Purpose
To display the ONU IP host corresponding MAC bridge port information
Usage Guidelines
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
hostid
Host ID
Range: 1 – 255
The following example displays ONU IP host corresponding MAC
bridge port information:
ZXAN(config)#show gpon remote-onu bridge-port ip-host
gpon-onu_0/3/1:1
Host ID:
1
Bridge port:
bridge_0/1
Priority:
0
Path-cost:
100
STP:
false
Encap-method: llc
Lan-fcs:
discard
Related
Commands
None
show gpon remote-onu interface pots
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu interface pots gpon-onu_shelf/slot/ol
t:onu [pots_slot/port]
To display the specified POTS port configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
pots_slot/port
ONU slot number,
POTS port number
Range: 1 – 31
characters
The following example displays the specified POTS port configuration:
241
ZXAN#show gpon remote-onu interface pots gpon-onu_0/3/1:1 pots_0/1
interfece: pots_0/1;
admin status: unlock;
operate status:NA;
hookState:
NA;
arc:0 arc-interval:0;
impedance :
0;
tx-path:
fulltimeOnHook;
rx-gain:
10;
tx-gain:
0;
Related
Commands
None
show gpon remote-onu ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu ip-host gpon-onu_shelf/slot/olt:onu
[hostid]
To display the ONU host IP address configuration information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, port number
and ONU ID
Range: 1 – 31
characters
hostid
ONU host ID
Range: 1 – 255
The following example displays the ONU host IP address configuration information:
ZXAN(config)#show gpon remote-onu ip-host gpon-onu_0/3/1:1
Host ID:
1
HostName:
Identify:
IP:
10.63.196.121
Mask:
255.255.255.0
Gateway:
0.0.0.0
Primary DNS:
0.0.0.0
Second DNS:
0.0.0.0
DHCP-enable:
false
Ping-response:
false
Traceroute-response:false
MAC:
0000.0000.0000
CurIP:
0.0.0.0
CurMask:
0.0.0.0
CurGateway:
0.0.0.0
CurPriDNS:
0.0.0.0
CurSecDNS:
0.0.0.0
DomainName:
242
Chapter 5 GPON
Related
Commands
None
bridge-port ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu performance bridge-port ip-host
gpon-olt_shelf/slot/oltId OnuId [hostid]
To query the ONU performance statistics as per IP host
Parameter
Description
Value
ltId
Shelf number, slot
number, OLT ID
Range: 1 – 19
characters
OnuId
ONU ID
Range: 1 – 128
hostid
Host ID
Range: 1 – 255
The following example displays how to query the ONU performance
statistics as per IP host:
ZXAN(gpon-onu-mng)# show gpon remote-onu performance
bridge-port ip-host gpon-olt_0/4/1 1 1 HostId: 1
ForwardFrameCnt: 0.
DelayExceedDiscardCnt: 0.
MtuExceedDiscardCnt: 0.
RxFrameCnt: 0.
RxDiscardCnt: 0.
Related
Commands
None
show gpon remote-onu pre-filter
ip-host
Syntax
Purpose
Usage Guidelines
ip-host host id
To display the protocol filter configuration on IP host bridge port
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
host id
Host ID
Range: 1 – 255
243
Mode
Example
The following example displays protocol filter configuration on IP
host bridge port:
ZXAN(config)#show gpon remote-onu pre-filter gpon-onu_0/3/1:1 ip-host 1
Host ID:
1
Rarp:
forward
IPx :
forward
NetBEUI:
forward
AppleTalk:
forward
bpdu :
forward
Arp :
forward
PPPOE :
forward
Related
Commands
None
show gpon remote-onu sip-agent
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu sip-agent gpon-onu_shelf/slot/olt:onu
[agent-id]
To display the SIP agent configuration information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
agent-id
Agent ID
Range: 1 – 65,535
The following example displays SIP agent configuration information:
ZXAN#show sip-agent gpon-onu_0/3/1:4
agent id :
1;
proxyServer:
1.1.1.1;
outboundProxy: 2.2.2.2;
primary DNS :
3.3.3.3;
second DNS :
0.0.0.0;
regServer :
4.4.4.4;
regUserName:
aaa;
regPassword:
aaa;
tcpudpPort:
21;
regExpTime :
3600;
reRegStartTime: 1223;
ssVendor:
ZTE;
status:
NA;
Related
Commands
None
show gpon remote-onu sip-user
Syntax
Purpose
244
show gpon remote-onu sip-user gpon-onu_shelf/slot/olt:onu
[pots_slot/port]
To display the SIP user information
Chapter 5 GPON
Usage Guidelines
Mode
Example
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
pots_slot/port
POTS port ID
Range: 1 – 31
characters
The following example displays the SIP user information:
ZXAN(gpon-onu-mng)#show gpon remote-onu sip-user gpon-onu_0/4/1:1
Uni name:
pots_0/1
Agent id :
1
UserAOR:
3467897
DisplayName:
UserName:
Password:
VMailServer:
VMailValidate:
disable
VMailUserName:
VMailPassword:
VMailRealm:
VMailExpTime(s):
3600
ReleaseTime(s):
10
RohTime(s):
15
DialPlanTableName:
ServiceProfileId:
0
FeatureCodeTableId: 0
Related
Commands
None
show gpon remote-onu vlan-filter
ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-filter ip-host gpon-onu_shelf/sl
ot/olt:onu [hostid]
To display the IP host port VLAN filter parameters
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
hostid
Host ID
Range: 1 – 255
To display IP Host port VLAN filter parameters:
ZXAN(config)#show gpon remote-onu vlan-filter ip-host gpon-onu_0/3/1:1
Host ID
Priority
Vlan id
..................................
1
0
100
245
Related
Commands
None
vlan-filter-mode ip-host
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu vlan-filter-mode ip-host gpon-onu_s
helf/slot/olt:onu [hostid]
To display the VLAN filter mode on IP host port
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
hostid
Host ID
Range: 1 – 255
The following example displays the VLAN filter mode on IP Host
port:
vlan-filter-mode ip-host gpon-onu_0/3/1:1
Host ID:
1
Tag-filter:
vid-filter
Untag-filter:
discard
Related
Commands
None
show gpon remote-onu vlan-tag
ip-host
Syntax
Purpose
Usage Guidelines
Mode
246
show gpon remote-onu vlan-tag ip-host gpon-onu_shelf/slot
/olt:onu [hostid]
To display the VLAN property on ONU IP host port
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
hostid
Host ID
Range: 1 – 255
Chapter 5 GPON
Example
The following example displays VLAN property on ONU IP host
port:
ZXAN(config)#show gpon remote-onu vlan-tag ip-host gpon-onu_0/3/1:1
Host ID
Up-mode
Up-priority
Up-vlan
Down-mode
....................................................................
1
add
0
100
untag
Related
Commands
None
show gpon remote-onu voip-ctp
Syntax
Purpose
Usage Guidelines
Mode
Example
show gpon remote-onu voip-ctp gpon-onu_shelf/slot/olt:onu
[pots_slot/port]
To display the VoIP voice CTP configuration
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
pots_slot/port
POTS port ID
Range: 1 – 31
characters
The following example displays VoIP Voice CTP configuration:
ZXAN(gpon-onu-mng)#show gpon remote-onu voip-ctp gpon-onu_0/4/1:1
Interface
SignalCode
MediaProfileName
.................................................
pots_0/1
loop-start
Related
Commands
None
voip-linestatus
Syntax
Purpose
Usage Guidelines
show gpon remote-onu voip-linestatus gpon-onu_shelf/slot/
olt:onu [pots_slot/port]
To view the VoIP line information
Parameter
Description
Value
olt:onu
Shelf number, slot
number, OLT ID, ONU
ID
Range: 1 – 31
characters
pots_slot/port
POTS port ID
Range: 1 – 31
characters
247
Mode
Example
The following example displays how to view the VoIP line information:
ZXAN(gpon-onu-mng)#show gpon remote-onu voip-linestatus gpon-onu_0/4/1:1
Interface:
pots_0/1
Code used:
N/A
Service status:
N/A
Session type:
N/A
Call period 1:
0
2:
0
Call dest address 1:
2:
Interface:
pots_0/2
Code used:
N/A
Service status:
N/A
Session type:
N/A
Call period 1:
0
2:
0
Call dest address 1:
2:
Related
Commands
None
GPON Protection
Commands
protection group
Syntax
protection group group-name workPon olt-interface-name
protectPon olt-interface-name typeB [subtype {1+1 | 1:1 |
load-balance}]
no protection group group-name
Purpose
Usage Guidelines
248
To configure the protection group
Parameter
Description
Value
group group-name
Protection group
name
Range: 0 – 31
characters
workPon olt-interfac
e-name
Working PON interface
name
Keywords:
epon-olt_0/3,
epon-onu_0/3,
gei_0/5, gei_0/6,
gpon-olt_0/9,
gpon-onu_0/9,
null, smartgroup,
supervlan, tunnel,
vlan
Chapter 5 GPON
Mode
Example
Parameter
Description
Value
protectPon
olt-interface-name
Protection PON
interface name
Keywords:
epon-olt_0/3,
epon-onu_0/3,
gei_0/5, gei_0/6,
gpon-olt_0/9,
gpon-onu_0/9,
null, smartgroup,
supervlan, tunnel,
vlan
typeB
Type B
-
subtype
Sub-type
Keyword: 1+1, 1:1,
load-balance
ZXAN(config)#
The following example displays how to configure the protection
group:
ZXAN(config)#protection group group1 workPon
gpon-olt_0/9/1 protectPon gpon-olt_0/9/2 typeB
gpon-olt_0/9/1 protectPon gpon-olt_0/9/2 typeB subtype 1+1
gpon-olt_0/9/1 protectPon gpon-olt_0/9/2 typeB subtype 1:1
gpon-olt_0/9/1 protectPon gpon-olt_0/9/2 typeB subtype
load-balance
ZXAN(config)#
Related
Commands
None
protection prop
Syntax
Purpose
Usage Guidelines
protection prop group group-name [mode {non-revertive |
revertive}] [wtr interval]
To configure the protection group properties
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
mode
Protection group
mode
-
non-revertive
Non revertive
(default)
-
revertive
Revertive
-
wtr interval
Wait retrieve time
interval
Range: 0 – 86400
seconds <: (80 x 60
x 60) seconds
249
Mode
Example
ZXAN(config)#
group properties:
ZXAN(config)#protection prop group group1 mode non-revertive
ZXAN(config)#protection prop group group1 mode revertive
ZXAN(config)#protection prop group group1 wtr 100
ZXAN(config)#
Related
Commands
None
protection switch-command
Syntax
protection switch-command group group-name {force {p2w
| w2p} | lockoutprotect | manual {p2w | w2p}}
no protection switch-command group group-name
Purpose
Usage Guidelines
Mode
Example
To configure the protection group switch command properties
Parameter
Description
Value
group group-name
Protection group
name
Range: 0 – 31
characters
force {p2w | w2p}
Force protection
-
lockoutprotect
Lockout protection
-
manual {p2w |
w2p}
Manual protection
-
ZXAN(config)#
group switch command properties:
ZXAN(config)#protection
force p2w
force w2p
lockoutprotect
manual p2w
manual w2p
ZXAN(config)#
Related
Commands
switch-command group group1
None
protection sync-data
Syntax
250
protection sync-data group group-name
Chapter 5 GPON
Purpose
Usage Guidelines
Mode
To configure the protection group properties
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
ZXAN#
ZXAN(config)#
Example
group properties:
ZXAN(config)#protection sync-data group group1
ZXAN(config)#
Related
Commands
None
show protection group count
Syntax
Purpose
Usage Guidelines
Mode
Example
show protection group count
To view the created protection group numbers
None
The following example displays how to view the created protection
group numbers:
ZXAN(config)#show protection group count
Zte
Related
Commands
None
show protection group prop
Syntax
Purpose
Usage Guidelines
Mode
Example
show protection group prop [group-name]
To display specified protection group information
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
The following example displays specified protection group information:
ZXAN(config)#show protection group prop
251
name:
protect olt interface:
work olt interface:
active pon:
type:
subType:
mode:
holdoff:
wtr:
Related
Commands
1
gpon-olt_0/4/1
gpon-olt_0/4/2
workPon
typeB
1:1
revertive
0
10
None
show protection switch-command
Syntax
Purpose
Usage Guidelines
Mode
Example
show protection switch-command [group group-name]
To display the XPON protection switch command information
Parameter
Description
Value
group group-name
PON protection group
name
Range: 1 – 31
characters
The following example displays the XPON protection switch command information:
ZXAN(config)#show protection switch-command
group name
switch-mode
..................................
ZTE
none
ZXAN(config)#show protection switch-command group group1
Related
Commands
None
show protection request
Syntax
Purpose
Usage Guidelines
Mode
252
show protection request [group group-name]
To display the specified protection group information
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
Chapter 5 GPON
Example
The following example displays the specified protection group information:
ZXAN#show protection request group test
name:
test
protect olt interface:
gpon-olt_0/9/2
work olt interface:
gpon-olt_0/10/1
Alarm request:
WorkChannel:
No alarm request!
ProtectChannel:
OLTSF
External requset:
none
Highest local request:
protect-fail
Related
Commands
None
show protection sync-data
progress-bar
Syntax
Purpose
Usage Guidelines
Mode
Example
show protection sync-data progress-bar
To view the protection data synchronization progress
None
The following example displays how to view protection data synchronization progress:
ZXAN#show protection sync-data progress-bar
Now execute percentage is 100％
Related
Commands
None
253
254
Chapter
6
CES
Table of Contents
CES Global Property Management ...................................... 255
Interface Property Management......................................... 263
CES-PW Service Property Management............................... 270
SDH Protection Configuration ............................................ 275
CES Global Property
Management
ces
Syntax
Purpose
Usage Guidelines
Mode
Example
ces
To enter the CES configuration mode
None
ZXAN(config)#
The following example displays how to enter the CES configuration
mode:
ZXAN(config)#ces
ZXAN(config-ces)#
Related
Commands
None
tdm-profile
Syntax
tdm-profile tdm-profile-name payloadsize reorder {enable
| disable} [almThreshold almThreshold] [clrAlmThreshold
clrAlmThreshold] [inSyncPkts inSyncPkts] [jtrBfr jtrBfr] [outSy
ncPkts outSyncPkts] [payloadSuppression {enable | disable}
][pktReplacePolicy {AIS | customed} ] [rtpHdr {enable
| disable [ssrcval]}] [timestamp-mode {notApplicable |
absolute | differential}]
no tdm-profile tdm-profile-name
255
Purpose
Usage Guidelines
To configure the CES TDM profile information
Parameter
Description
Value
tdm-profile-name
TDM profile name
Range: 0 – 63
characters
payloadsize
Payload size
-
reorder
If enabled, CE bound
packets are queued in
the jitter buffer, out
of order packets are
re-ordered
disable, enable
almThreshold
almThreshold
Alarms are only
reported when the
state persists for the
time specified
Default: 2500
milliseconds
clrAlmThreshold
clrAlmThreshold
Alarm must be
cleared after the
corresponding
amount of time
Default: 10000
milliseconds
inSyncPkts
inSyncPkts
Number of
consecutive packets
with sequential
sequence numbers
that are required to
exit the LOPS state
Default: 2
jtrBfr jtrBfr
Size of the configured
jitter butter to allow
accommodation to the
PSN-specific packet
delay variation
Default: 2000 ms
outSyncPkts
outSyncPkts
Number of
consecutive missing
packets that are
required to enter the
LOPS state
Default: 10
payloadSuppress
ion
If enabled, payload
suppression is allowed
disable, enable
pktReplacePolicy
Determines the value
to be displayed when
CE bound packets
have over/underflow
the jitter buffer, or
are missing for any
reason
AIS, Customed
If disabled, RTP
header is not prefixed
to the TDM packet
disable, enable
rtpHdr
256
Default: Disable
Default: AIS
Default: Disable
Chapter 6 CES
Mode
Example
Parameter
Description
Value
ssrcval
Synchronization
source identifier
Range: 1 –
42949672955
timestamp-mode
Timestamp
generation
Absolute, differential,
not Applicable
ZXAN(config-ces)#
The following example displays how to configure the CES TDM profile information:
ZXAN(config-ces)#tdm-profile zte 1024 reorder enable
rtpHdr enable 1024 jtrBfr 3000 payloadSuppression
disable inSyncPkts 2 outSyncPkts 10 pktReplacePolicy
ais almThreshold 2500 clrAlmThreshold 10000
timestamp-mode differential 5
ZXAN(config-ces)#
Related
Commands
Related
Information
None
�
Configure TDM profile property before it is associated with PW
link.
�
TDM profile cannot be modified and deleted if it is associated
with PW link.
�
TDM profiles, that are associated to the same slot, must have
same RTP value.
show ces tdm-profile
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces tdm-profile [profilename]
To query the CES profile information
Parameter
Description
Value
profilename
Profile name
Range: 1 – 64
characters
The following example displays how to query CES profile information:
ZXAN(config)# show ces tdm-profile
Profile name zte.
Payload size is 1024 bytes, reorder is enable, rtpHdr is used.
JtrBfr is 3000 us, payload suppression is disable.
ConsecPktsInSynch is 2, PktsOutSync is 10.
PacketReplacePolicy is AIS.
AlarmThreshold(ms) is 2500 and ClearAlarmThreshold(ms) is 10000.
TimeStampMode is differential. QueueSize(bytes) is 8.
257
Related
Commands
tdm-profile
mac-address
Syntax
Purpose
Usage Guidelines
Mode
Example
mac-address mac-address slot/portid
To configure the source MAC address
Parameter
Description
Value
mac-address
MAC address
Range:
0015.eb72.0000 –
0015.eb72.70df
slot/portid
Slot number and port
number
Range: 0 – 31
characters
ZXAN(config-ces)#
The following example displays how to configure the source MAC
address:
ZXAN(config)#ces
ZXAN(config-ces)#mac-address 0015.eb72.0008 2/1
ZXAN(config-ces)#
Related
Commands
Related
Information
None
MAC address cannot be modified if PW link exists.
ip-address
Syntax
ip-address ipv4 ip-address slot/portid
no ip-address
Purpose
Usage Guidelines
Mode
Example
258
To configure the source IP address
Parameter
Description
Value
ipv4
IPv4
-
ip-address
IP address
A.B.C.D
slot/portid
number
Range: 0 – 31
characters
ZXAN(config-ces)#
The following example displays how to configure the source IP address:
Chapter 6 CES
ZXAN(config)#ces
ZXAN(config-ces)#ip-address ipv4 10.1.1.1 2/1
ZXAN(config-ces)#
Related
Commands
Related
Information
None
IP address cannot be modified if PW link exists.
show ces global-prop
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces global-prop slot/port
To display the CES global information
Parameter
Description
Value
slot/port
number
Range: 1 – 31
characters
The following example displays the CES global information:
ZXAN#show ces global-prop
Slot/Port
SourceMAC
Source IP
-----------------------------------------------2/1
0015.eb72.0008
192.192.192.4
ZXAN#
Related
Commands
None
sdhprot group
Syntax
sdhprot group group-name worksdhport sdhport-name prote
ctsdhport sdhport-name 1plus1
no sdhprot group group-name
Purpose
Usage Guidelines
To create the SDH port protection group
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
worksdhport
sdhport-name
protectsdhport
sdhport-name
SDH port name
Range: 1 – 31
characters
1plus1
Protection type
-
259
Mode
Example
ZXAN(config-ces)#
The following example displays how to create SDH port protection
group:
ZXAN(config-ces)# sdhprot group zte worksdhport tdm_0/12/1
protectsdhport tdm_0/11/1 1plus1
Related
Commands
Related
Information
None
The current protection type is 1plus1. The two inter-protected
SDH ports must be in the same type and one port cannot belong
to different protection groups.
sdhprot prop
Syntax
Purpose
Usage Guidelines
Mode
Example
sdhprot prop group group-name {[mode {revertive | non-re
vertive}] [wtr interval]}
To configure the SDH protection group property
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
mode
Protection mode
-
revertive
Revertive mode
-
non-revertive
Non-revertive mode
-
wtr interval
Recovery time
Range: 0 – 86400
seconds
ZXAN(config-ces)#
The following example displays how to configure the SDH protection group property:
ZXAN(config-ces)#sdhprot prop group zte mode non-revertive wtr 120
Related
Commands
None
sdhprot switch-command
Syntax
sdhprot switch-command group group-name {lockoutprot
ect | {force | manual} {p2w | w2p}}
no sdhprot switch-command group group-name
Purpose
Usage Guidelines
260
To configure the switch mode between work port and protection
port in SDH protection group
Chapter 6 CES
Mode
Example
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
lockoutprotect
Lock protection
channel
-
force
Force switch to
protection mode
-
manual
Manual switch to
protection mode
-
p2w
Data synchronization
from protection port
to work port
-
w2p
Data synchronization
from work port to
protection port
-
ZXAN(config-ces)#
The following example displays how to configure the switch mode
between work port and protection port in SDH protection group:
ZXAN(config-ces)#sdhprot switch-command group zte force w2p
Related
Commands
Related
Information
None
The switch priority (highest to lowest) is as follows:
1.
2.
3.
4.
5.
Lock protection channel
Force switch to protection port
Force switch to work port
Manual switch to protection port
Manual switch to work port
show ces sdhprot group count
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces sdhprot group count
To view created the SDH protection group numbers
None
The following example displays how to view the created SDH protection group numbers:
ZXAN(config)# show ces sdhprot group count
261
Related
Commands
None
show ces sdhprot group prop
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces sdhprot group prop [group-name]
To display the specified SDH protection group information
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
The following example displays the specified SDH protection group
information:
ZXAN(config)# show ces sdhprot group prop
Related
Commands
None
show ces sdhprot switch-command
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces sdhprot switch-command [group group-name]
To display the SDH protection group switch commands
Parameter
Description
Value
groupName
Protection group
name
Range: 1 – 31
characters
The following example displays SDH protection group switch commands:
ZXAN(config)# show ces sdhprot switch-command
group name
switch-mode
............................
zte
force_p2w
Related
Commands
None
show ces sdhprot request
Syntax
262
show ces sdhprot request [group group-name]
Chapter 6 CES
Purpose
Usage Guidelines
Mode
Example
To display the SDH protection group request information
Parameter
Description
Value
group-name
Protection group
name
Range: 1 – 31
characters
The following example displays the SDH protection group request
information:
ZXAN#show ces sdhprot request group test
Related
Commands
None
show ces sdhprot sync-data
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces sdhprot sync-data progress-bar
To display the SDH data synchronization progress
None
The following example displays the SDH data synchronization
progress:
ZXAN# show ces sdhprot sync-data progress-bar
Now execute percentage is 100%.
Related
Commands
None
Interface Property
Management
interface tdm_X/X/X
Syntax
interface tdm_shelf/slot/tdmIfId
Purpose
To enter into TDM interface mode
Usage Guidelines
263
Mode
Example
Parameter
Description
Value
tdm_shelf/slot/tdmI
fId
TDM interface number
-
ZXAN(config)#
The following example displays how to enter into TDM interface
mode
ZXAN(config)# interface tdm_0/12/1
ZXAN(config-if)#
Related
Commands
None
admin-status
Syntax
Purpose
Usage Guidelines
Mode
Example
admin-status {disable | enable}
To enable/disable the administration status of TDM interface
Parameter
Description
Value
enable
Enable administration
status
-
disable
Disable administration
status
-
ZXAN(config-if)#
The following example displays how to enable/disable the administration status of TDM interface:
ZXAN(config)#interface tdm_0/2/1
ZXAN(config-if)#admin-status enable
ZXAN(config-if)#
Related
Commands
None
clock-source
Syntax
Purpose
Usage Guidelines
264
clock-source {adaptive | differential | differntial2 | enhanc
ed-adaptive | localTiming | loopTiming | throughTiming}
To configure the TDM transmission clock source
Parameter
Description
Value
adaptive
Adaptive clock source
(default)
-
Chapter 6 CES
Mode
Example
Parameter
Description
Value
differential
Differential clock
source
-
differntial2
Differential 2 clock
source
-
enhanced-adaptive
Enhanced adaptive
clock source
-
localTiming
Local timing clock
source
-
loopTiming
Loop timing clock
source
-
throughTiming
Through timing clock
source
-
ZXAN(config-if)#
The following example displays how to configure the TDM transmission clock source:
ZXAN(config-if)#clock-source adaptive
ZXAN(config-if)#clock-source differential
ZXAN(config-if)#clock-source differntial2
ZXAN(config-if)#clock-source enhanced-adaptive
ZXAN(config-if)#clock-source localTiming
ZXAN(config-if)#clock-source loopTiming
ZXAN(config-if)#clock-source throughTiming
ZXAN(config-if)#
Related
Commands
Related
Information
None
The user cannot modify the clock source if PW linkage exists on
the card.
line-coding
Syntax
Purpose
Usage Guidelines
line-coding line-coding-type
To configure the line coding type for TDM interface
Parameter
Description
Value
line-coding-type
Line coding
type
Keywords: AMI, B6ZS, B8ZS,
HDB3, JBZS, ZBTSI,other
Default: HDB3
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the line coding
type for TDM interface:
265
ZXAN(config-if)#line-coding AMI
ZXAN(config-if)#
Related
Commands
Related
Information
None
The user cannot modify the line-coding type if PW link exists on
the card.
line-type
Syntax
Purpose
Usage Guidelines
line-type line-type
To configure the line type for TDM interface
Parameter
Description
Value
line-type
Line type
Keywords: d4,
ds2m12, e1, e1crc,
e1crcmf, e1mf,
e1q50, e1q50crc,
e1unframed, e2, esf,
other, unframed
Default: e1
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the line type for
TDM interface:
ZXAN(config-if)#line-type d4
ZXAN(config-if)#line-type e1
ZXAN(config-if)#
Related
Commands
Related
Information
None
The user cannot modify the line-type if PW linkage exists on the
card.
loopback
Syntax
Purpose
Usage Guidelines
266
loopback loopback-type
To configure the loopback condition for TDM interface
Chapter 6 CES
Parameter
Description
Value
loopback-type
Loopback type
Keywords: dualLoop,
inwardLoop, lineLoop,
noLoop, other,
payloadLoop
Default: noloop
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the loopback condition for TDM interface:
ZXAN(config-if)#loopback noloop
ZXAN(config-if)#
Related
Commands
None
range
Syntax
Purpose
Usage Guidelines
Mode
Example
range
To display the port list range
None
ZXAN(config-if)#
The following example displays port list range:
Portlist of the range: tdm_0/12/1
Related
Commands
None
framing
Syntax
Purpose
Usage Guidelines
Mode
Example
framing {sdh | sonnet}
To configure the SDH or SONET frame format (the system supports
SDH format only)
Parameter
Description
Value
sdh
SDH format
-
sonet
SONET format
-
ZXAN(config-if)#
The following example displays how to configure the SDH or SONET
frame format:
267
ZXAN(config-if)#framing sdh
ZXAN(config-if)#
Related
Commands
None
au-3
Syntax
Purpose
Usage Guidelines
au-3 {aug-number | au-3}
To enter the AU-3 interface mode
Parameter
Description
Value
aug-number
AUG number, defined
by type of SDH port.
For exmaple, STM-4
Range: 1 – 64
AU-3 number
Range: 1 – 3
au-3
Mode
Example
Maximum value: 4
ZXAN(config-if)#
The following example displays how to enter into the AU-3 interface mode:
ZXAN(config-if)#au-3 4/3
ZXAN(config-if)#
Related
Commands
Related
Information
None
Only the AUG mode (mapping mode is AU-3) can be configured.
By default, the system works in SDH/au-4 mode. If AU-3 is selected, the system enters the SONET OC-3 configuration mode.
au-4 tug-3
Syntax
Purpose
Usage Guidelines
268
au-4 tug3 {stm-1 | au-4 | tug-3-number}
To enter into the AU-4 TUG-3 interface mode
Parameter
Description
Value
stm-1
AUG number, defined
by type of SDH port.
e.g., STM-4
Range: 1 – 64
au-4
AU-3 number
1
tug-3-number
TUG-3 number
Range: 1 – 3
Maximum value: 4
Chapter 6 CES
Mode
Example
ZXAN(config-if)#
The following example displays how to enter into the AU-4 TUG-3
interface mode:
ZXAN(config-if)#au-4 tug3 4/1/3
ZXAN(config-if)#
Related
Commands
Related
Information
None
Only the AUG mode (its mapping mode is AU-4) can be configured.
tug-2{e1 | t1}
Syntax
tug-2 tug-2-number {e1 e1-line-number | t1 t1-line-number}
[clock-source {loopTiming | localTiming | throughTiming |
adaptive | enhanced-adaptive | differential |differntial2 }]
[loopback {noLoop | payloadLoop | lineLoop | other | inwa
rdLoop | dualLoop}]
no tug-2tug-2-number
Purpose
Usage Guidelines
Mode
Example
To configure the T1 or E1 line property
Parameter
Description
Value
tug-2 tug-2-number
Tug-2
Range: 1 – 7
e1 e1-line-number
E1 line ID
Range: 1 – 3
t1 t1-line-number
T1 line ID
Range: 1 – 4
clock-source
{loopTiming |
localTiming |
throughTiming
| adaptive |
enhanced-adaptive
| differential |
differntial2}]
Clock source
loopTiming localTiming throughTiming adaptive enhanced-adaptive differentialdifferntial2
loopback{noLoop
| payloadLoop |
lineLoop | other
| inwardLoop |
dualLoop}
Loopback type
noLoop payloadLooplineLoopotherinwardLoopdualLoop
ZXAN(config-if)#
The following example displays how to configure the T1 or E1 line
property:
ZXAN(config-if)#au-4 tug-3 1/1/1
ZXAN(config-if-tug3)#tug-2 3 e1 2 clock-source loopTiming loopback lineLoop
269
Related
Commands
None
show ces interface
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces interface tdm tdm_shelf/slot/port
To display the CES interface information
Parameter
Description
Value
tdm
TDM interface list
-
tdm_shelf/slot/port
Shelf number, slot
number and port
number
Range: 1 – 31
characters
The following example displays the CES interface information:
ZXAN#show ces interface tdm_0/2/1
Interface :tdm_0/2/1
Type:
e1
Line coding: HDB3
Opr status:
enable
Clock status: FREERUN
ZXAN#
Related
Commands
Related
Information
Line type:
e1
Admin status: enable
Clock source: adaptive
noLoop
None
If an optical interface is specified, all configuration information of
this optical interface is displayed.
CES-PW Service Property
Management
pw
Syntax
pw pw_shelf/slot/pwid
no pw pw_shelf/slot/pwid
Purpose
Usage Guidelines
270
To create a PW and enter the PW configuration mode
Chapter 6 CES
Mode
Example
Parameter
Description
Value
pw_shelf/slot/pwid
PW shelf number,
slot number and PW
interface number
Range: 1 – 32
characters
ZXAN(config-ces)#
The following example displays how to create a PW and enter the
PW configuration mode:
ZXAN(config)#ces
ZXAN(config-ces)#pw pw_0/2/1
ZXAN(config-ces-pw)#
Related
Commands
None
admin-status
Syntax
Purpose
Usage Guidelines
Mode
Example
admin-status {disable | enable}
To enable/disable the admin status of the TDM interface
Parameter
Description
Value
enable
Enable administration
status
-
disable
Disable administration
status
-
ZXAN(config-if)#
The following example displays how to enable/disable the admin
status of the TDM interface:
ZXAN(config-if)#admin-status enable
ZXAN(config-if)#
Related
Commands
None
name(ces-pw)
Syntax
Purpose
Usage Guidelines
pw name name
To configure the PW name
Parameter
Description
Value
name
PW name
Range: 0 – 254
characters
271
Mode
Example
The following example displays how to configure the PW name:
ZXAN(config)#ces
ZXAN(config-ces-pw)#name pwname
Related
Commands
None
psn
Syntax
Purpose
Usage Guidelines
psn {ethernet in-ecid out-eciddst-mac mac-address vlan vlan
[priority priority] | ip src-udp-port dst-udp-port ipv4 | ipv6 dstip-address [dst-mac dst-mac-address vlan vlan] | priority [prio
rity]]}
To configure the PW general property at PSN side
Parameter
Description
Value
ethernet
PW Ethernet property
-
in-ecid
In EC ID
Format: 0xXXXXX102
Range: 0 – 10
characters
out-ecid
Out EC ID
Format: 0xXXXXX102
Range: 0 – 10
characters
Mode
Example
272
dst-mac mac-addr
ess
Destination MAC
address
XXXX.XXXX.XXXX
vlan vlan
VLAN ID
Range: 1 – 4094
characters
priority priority
Priority
Range: 0 – 7
ip
PW IP property
-
src-udp-port
Source UDP port
Range: 0 –
4294967295
dst-udp-port
Destination UDP port
Range: 0 –
4294967295
ipv4
IPv4 address
-
ipv6
IPv6 address
-
dst-ip-address
Destination IP address
A.B.C.D
The following example displays how to configure the PW general
property:
Chapter 6 CES
ZXAN(config-ces-pw)# psn ethernet 0x1102 0x1102 dst-mac 0015.eb72.0006
vlan 1024 priority 7
Related
Commands
None
tdm-service
Syntax
Purpose
Usage Guidelines
Mode
Example
tdm-service type{e1Satop | e3Satop | t1Satop | t3Satop}
rate rate {tdm_shelf/slot/port | tdm_shelf/slot/port.aug-number
/1/tug-3/tug-2/e1} [tdm-profile-name tdm-profile-name]
To configure the PW TDM service type
Parameter
Description
Value
type
TDM service type
e1Satop, e3Satop,
t1Satop, t3Satop
rate rate
Bit-rate of the TDM
service in multiples of
the ’basic’ 64 kbps
Range: 1 –
42949672955
Default: 32
tdm_shelf/slot/port,
tdm_shelf/slot/port.a
ug-number/1/tug-3/t
ug-2/e1
Shelf number, slot
number and port
number
Range: 0 – 31
characters
tdm-profile-name
tdm-profile-name
TDM profile name
Range: 0 – 63
characters
The following example displays how to configure the PW TDM service type:
ZXAN(config)#ces
ZXAN(config-ces-pw)#tdm-service type e1Satop rate 128
tdm_0/2/e1 tdm-profile-name zte
Related
Commands
Related
Information
None
�
Mapping relationship exists between rate and PW link type:
Satop E1 – 32
Satop T1 – basic emulation mode : 24
aligned T1 – emulation mode : 25
Satop E3 – 535
Satop T3 – 699
�
TDM profile name must be created before it is associated with
PW link.
273
�
TDM profiles associated with the same slot PW links must have
same RTP header property.
show ces pw count
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces pw count
To display the CES PW by name (including active and inactive PW)
None
The following example displays the CES PW by name (including
active and inactive PW):
ZXAN#show ces pw count
PW
Status
------------------------pw_0/2/1
Inactive
ZXAN#
Related
Commands
None
show ces pw prop
Syntax
Purpose
Usage Guidelines
Mode
Example
show ces pw prop detail pw_shelf/slot/pwid
To display the CES active PW information
Parameter
Description
Value
detail
PW property detail
-
pw_shelf/slot/pwid
PW shelf number,
slot number and PW
interface number
Range: 1 – 31
characters
The following example displays the CES active PW information:
ZXAN#show ces pw prop detail pw_0/2/1
ZXAN#
274
Chapter 6 CES
Related
Commands
None
SDH Protection
Configuration
sdhprot
Syntax
sdhprot group group-name worksdhport sdhport-name prote
ctsdhport sdhport-name 1plus1
no sdhprot group group-name
Purpose
Usage Guidelines
Mode
Example
To create the SDH protection group
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
worksdhport
sdhport-name
SDH port name
Range: 1 – 31
characters
protectsdhport
sdhport-name
Protection port
Range: 1 – 31
characters
1plus1
Protection type
-
ZXAN(config-ces)#
The following example displays how to create the SDH protection
group:
ZXAN(config-ces)#sdhprot group aaa worksdhport tdm_0/3/1
protectsdhport tdm_0/4/1 1plus1
Related
Commands
Related
Information
None
Currently only 1+1 protection is supported.
Mutually protected SDH devices must be CL1A. Moreover one port
cannot belong to different protection groups.
sdhprot prop
Syntax
sdhprot prop group group-name mode {revertive | non-reve
rtive} [wtr interval]
275
sdhprot prop group group-name wtr interval [mode {revert
ive | non-revertive}]
Purpose
Usage Guidelines
Mode
Example
To configure the protection group property
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
mode
Choose mode
-
revertive
Revertive mode
-
non-revertive
Non-revertive mode
-
wtr interval
Recovery time
ZXAN(config-ces)#
group property:
ZXAN(config-ces)#sdhprot prop group aaa mode non-revertive wtr 0
Related
Commands
Related
Information
None
Currently only non-revertive mode is supported.
sdhprot switch-command
Syntax
sdhprot switch-command group group-name {{{force |
manual} {p2w | w2p}} | lockoutprotect}
no sdhprot switch-command group group-name
Purpose
Usage Guidelines
Mode
276
To protect switch command
Parameter
Description
Value
group group-name
Protection group
name
Range: 1 – 31
characters
force
Force switch
-
manual
Manual switch
-
p2w
From protection port
to work port
-
w2p
From work port to
protection port
-
lockoutprotect
Lock protection
channel
-
ZXAN(config-ces)#
Chapter 6 CES
Example
The following example displays how to protect switch command:
ZXAN(config-ces)#sdhprot switch-command group aaa force w2p
Related
Commands
Related
Information
None
When force switch is used, the current working card does not accept any other switch commands and does not respond to alarm
switch unless this command is disabled.
When manual switch is used, the working card accepts other
commands. When the current working card generates alarm, it
switches to protection card. When the alarm is cleared, it switches
automatically from protection card to working card.
277
278
Chapter
7
Performance
Management
Table of Contents
pon ............................................................................... 279
onu-type ........................................................................ 280
onu-type-attr gpon .......................................................... 280
onu-if ............................................................................ 281
performance cesmsb2 ...................................................... 282
performance cesprotocol .................................................. 282
performance cesrfc1213 ................................................... 283
performance cesrfc1757 ................................................... 284
performance ceswanport .................................................. 284
performance GponOlt ....................................................... 285
performance GponOnu ..................................................... 286
performance cesrsb1........................................................ 286
performance cesvc4b3 ..................................................... 287
performance cesvc12v5.................................................... 288
performance cesvc12v5rei ................................................ 288
performance-threshold ..................................................... 289
show onu-type ................................................................ 290
show onu-if .................................................................... 291
show onu-type-attr gpon .................................................. 292
ip-pool epon ................................................................... 292
power-switch .................................................................. 293
show performance olt....................................................... 294
show performance onu ..................................................... 294
pon
Syntax
Purpose
Usage Guidelines
Mode
Example
pon
To enter the PON mode
None
ZXAN(config)#
The following example displays how to enter the PON mode:
ZXAN(config)#pon
ZXAN(config-pon)#
279
Related
Commands
None
onu-type
Syntax
onu-type {epon | gpon} onu-type-name [description descript
ion]
no onu-type onu-name
Purpose
Usage Guidelines
Mode
Example
To configure the ONU type template
Parameter
Description
Value
onu-type-name
ONU name
Range: 0 – 64
characters
description
description
ONU description
Range: 0 – 64
characters
ZXAN(config-pon)#
The following example displays how to configure the ONU type
template:
ZXAN(config)#pon
ZXAN(config-pon)#onu-type
ZXAN(config-pon)#
Related
Commands
Related
Information
epon
epon
gpon
gpon
onutype
onutype description description
onutype
onutype description description
None
ZTE-F601, ZTE-F621, ZTE-F622, ZTE-F625, ZTE-F640 and ZTEF641 are GPON default ONU types. These types cannot be deleted
and modified, and user interfaces cannot be added or deleted.
onu-type-attr gpon
Syntax
Purpose
Usage Guidelines
280
onu-type-attr gpon onu-type-name [description description |
max-bridge-perslot num | max-gemport num | max-tcont
num | max-uplink-perbridge num]
To configure the GPON ONU type property
Parameter
Description
Value
onu-type-name
ONU type name
Range: 1 – 64
Chapter 7 Performance Management
Parameter
Description
Value
description
description
ONU description
Range: 1 – 63
max-bridge-perslot
num
Maximum bridge
numbers
Range: 1 – 255
max-gemport num
Maximum GEM port
numbers
Range: 1 – 255
Maximum Tcont
numbers
Range: 1 – 255
Maximum uplink
interface numbers per
bridge
Range: 1 – 255
max-tcont num
max-uplink-perbri
dge num
Mode
Example
Default: 255
Default: 255
Default: 255
Default: 255
ZXAN(config-pon)#
type property:
ZXAN(config)#pon
ZXAN(config-pon)#onu-type-attr gpon ZTE-F888 max-bridge-perslot 8
Related
Commands
None
onu-if
Syntax
onu-if onu-type-name type_slot/portlist
no onu-if onu-type-name type_slot/portlist
Purpose
Usage Guidelines
Mode
Example
To configure the UNI of the ONU type
Parameter
Description
Value
onu-type-name
ONU name
Range: 0 – 64
characters
type_slot/portlist
UNI type slot number
and port number
Type: eth_, e1_, t1_,
ds1_, pots_, rf_, wifi_
Range: 0 – 31
characters
Slot range: 0 – 255
Portlist range: 1 –
255
ZXAN(config-pon)#
The following example displays how to configure the UNI of the
ONU type:
ZXAN(config)#pon
ZXAN(config-pon)#onu-if ZTE-F888 eth_0/1-4
ZXAN(config-pon)#onu-if ZTE-F888 pots_0/1-2
ZXAN(config-pon)#
281
Related
Commands
Related
Information
None
ZTE-F601, ZTE-F621, ZTE-F622, ZTE-F625, ZTE-F640 and ZTEF641 are GPON default ONU types. These types cannot be deleted
and modified, and user interfaces also cannot be added or deleted.
performance cesmsb2
Syntax
Purpose
Usage Guidelines
Mode
Example
performance cesmsb2 slot slot-id port port-id {create | delete
| start | stop | create-start}
To specify the CES msb2 performance statistics
Parameter
Description
Value
slot slot-id
Slot number
Range: 1 – 64
port port-id
Port ID
1
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES MSB2 performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesMsb2 slot 3 port 1 create-start
Related
Commands
None
performance cesprotocol
Syntax
Purpose
Usage Guidelines
282
performance cesprotocol slot slot-id ge port-id {create |
delete | start | stop | create-start }
To specify the CES history performance statistics
Parameter
Description
Value
slot slot-id
Slot number
Range: 1 – 64
Mode
Example
Parameter
Description
Value
ge port-id
Port ID
Range: 1 – 2
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES history performance statistic:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesprotocol slot 1 ge 1 create-start
Related
Commands
None
performance cesrfc1213
Syntax
Purpose
Usage Guidelines
Mode
Example
performance cesrfc1213 slot slot-id ge port-id {create |
delete | start | stop | create-start}
To specify the CES RFC1213 protocol performance statistics
Parameter
Description
Value
slot slot-id
Slot number
Range: 1 – 64
ge port-id
Port ID
Range: 1 – 2
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES RFC1213
protocol performance statistic:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesrfc1213 slot 1 ge 1 create-start
283
Related
Commands
None
performance cesrfc1757
Syntax
Purpose
Usage Guidelines
Mode
Example
performance cesrfc1757 slot slot-id ge port-id {create |
To specify the CES RFC1757 protocol performance statistics
Parameter
Description
Value
slot slot-id
Slot number
Range: 1 – 64
ge port-id
Port ID
Range: 1 – 2
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES RFC1757
protocol performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesrfc1757slot 1 ge 1 create-start
Related
Commands
None
performance ceswanport
Syntax
Purpose
Usage Guidelines
284
performance ceswanport slot slot-id pwid pwid {create |
delete | start | stop | create-start }
To specify the CES WAN interface performance statistics
Parameter
Description
Value
slot slot-id
Slot ID
Range: 1 – 64
pwid pwid
PW ID
Range: 1 – 63
create
Create
-
Mode
Example
Parameter
Description
Value
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES WAN interface performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance CesWanPort slot 1 pw 1 create-start
Related
Commands
None
performance GponOlt
Syntax
Purpose
Usage Guidelines
Mode
Example
performance GponOlt gpon-olt_shelf/slot/oltId {create |
To specify the GPON OLT interface performance statistics
Parameter
Description
Value
ltId
Slot ID and port ID
Range: 1 – 19
characters
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the GPON OLT interface performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance GponOlt gpon-olt_0/2/1 create-start
285
Related
Commands
None
performance GponOnu
Syntax
Purpose
Usage Guidelines
Mode
Example
performance
GponOnu
gpon-olt_shelf/slot/oltId
{create | delete | start | stop | create-start}
onu-id
To specify the GPON ONU performance statistics
Parameter
Description
Value
ltId
GPON interface slot
ID and port ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 64
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
–
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the GPON ONU performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance GponOnu gpon-olt_0/2/1 1 create-start
Related
Commands
None
performance cesrsb1
Syntax
Purpose
Usage Guidelines
286
performance cesrsb1 slot slot-id port port-id {create | delete
| start | stop | create-start}
To specify the CES RSB1 performance statistics
Parametet
Description
Value
slot slot-id
Slot number
Range: 1 – 64
port port-id
Port ID
1
create
Create
-
Mode
Example
Parametet
Description
Value
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES RSB1 performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesRsb1 slot 3 port 1 create-start
Related
Commands
None
performance cesvc4b3
Syntax
Purpose
Usage Guidelines
Mode
Example
performance cesvc4b3 slot slot-id port port-id {create |
To specify the SDH VC4B3 performance statistics
Parameter
Description
Value
slot slot-id
Slot ID
Range: 1 – 64
port port-id
Port number
1
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the SDH VC4B3 performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)# performance cesvc4b3 slot 3 port 1 create-start
287
Related
Commands
None
performance cesvc12v5
Syntax
Purpose
Usage Guidelines
performance cesvc12v5 interface-name {create | delete |
start | stop | create-start}
To specify the CES VC12V5 performance statistics
Parameter
Description
Value
interface-name
Interface name
Range: 0 – 31
characters
Format: characterstd
m_shelf/slot/port.aug
no/1/tug3/tug2/e1
Mode
Example
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES VC12V5
performance statistic:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesVc12v5 tdm_0/3/1 create-start
Related
Commands
None
performance cesvc12v5rei
Syntax
Purpose
Usage Guidelines
288
performance cesvc12v5rei interface-name {create | delete |
start | stop | create-start}
To specify the CES VC12V5 remote error performance statistics
Parameter
Description
Value
interface-name
Interface name
Range: 1 – 31
characters
Format: tdm_shelf/sl
ot/port.augno/1/tug3
/tug2/e1
Mode
Example
create
Create
-
delete
Delete
-
start
Start
-
stop
Stop
-
create-start
Create and start
-
ZXAN(config-pon)#
The following example displays how to specify the CES VC12V5
remote error performance statistics:
ZXAN(config)#pon
ZXAN(config-pon)#performance cesvc12v5rei tdm_0/3/1 create-start
Related
Commands
None
performance-threshold
Syntax
Purpose
Usage Guidelines
Mode
Example
performance-threshold variable oid type {absolute | delta}
interval sample-interval risingThreshold risingThresholdvalue
fallingThreshold fallingThresholdvalue
To configure the performance threshold
Parameter
Description
Value
variable-oid
Performance statistics
parameter number
Range: 1 – 255
characters
interval sample-inte
rval
Sample interval
risingThreshold
risingThresholdvalue
Rising threshold value
Range: 1 – 31
fallingThreshold
fallingThresholdvalue
Falling threshold value
Range: 1 – 31
The minimum valid
interval: 5 sec
ZXAN(config-pon)#
The following example displays how to configure performance
threshold:
289
ZXAN(config)#pon
ZXAN(config-pon)#performance-threshold
1.3.6.1.4.1.3902.1015.1013.6.1.1.1.2.269091072
type absolute interval 20 risingThreshold 123 fallingThreshold 123
Related
Commands
Related
Information
None
variable oid format
table-oid . entry-oid . sub-varialbe-oid . ifIndex [ . secondifIndex]
Example: 1.3.1.1.4.1
�
table-oid
CesWanPort
1.3.6.1.4.1.3902.1015.1013.6.1.1
CesProtocol
1.3.6.1.4.1.3902.1015.1013.6.1.2
CesRfc1213
1.3.6.1.4.1.3902.1015.1013.6.1.3
CesRfc1757
1.3.6.1.4.1.3902.1015.1013.6.1.4
EponOltVirtualIfBER 1.3.6.1.4.1.3902.1015.1010.1.9.1.1
EponOltEther
1.3.6.1.4.1.3902.1015.1010.1.9.1.3
EponOltPhyPort
1.3.6.1.4.1.3902.1015.1010.1.9.1.2
GponOlt
1.3.6.1.4.1.3902.1012.3.12.13
GponOnu
1.3.6.1.4.1.3902.1012.3.28.6
�
entry-oid 1
�
sub-variable-oid number starting from 1
�
ifIndex
---------------------------------------------------------------------| 4
| 4
|
8
|
8
|
8
|
----------------------------------------------------------------------|Type：1 | Shelf | slot
|
olt
| reserved |
---------------------------------------------------------------------------------------------------------------------------------------------| 4
| 4
|
8
|
8
|
8
|
---------------------------------------------------------------------|Type：3 | Shelf |slot(5b)Olt(3b)
|
onu |
reserved
|
--------------------------------------------------------------------| 4
| 4
|
8
|
8
|
8
|
--------------------------------------------------------------------|Type：6 | Shelf |
slot
|
reserved
|
-------------------------------------------------------------------CesWanPort
Type1
CesProtocol
Type6
CesRfc1213
Type6
CesRfc1757
Type6
EponOltVirtualIfBER Type1
EponOltEther
Type1
EponOltPhyPort
Type3
GponOlt
Type1
GponOnu
Type1
�
second-ifIndex range: 1 – 64; use second-ifIndex only when
performance threshold value is GPON ONU.
show onu-type
Syntax
290
show onu-type [epon | gpon]
Purpose
Usage Guidelines
Mode
Example
To display the ONU type template information
Parameter
Description
Value
epon
ONU type EPON
-
gpon
ONU type GPON
-
The following example displays the ONU type template information:
ZXAN(config-pon)#show onu-type
Pon Type
Onu type
Description
-------------------------------------------gpon
ZTE-F601
ZTE-F601
gpon
ZTE-F621
ZTE-F621
gpon
ZTE-F622
ZTE-F622
gpon
ZTE-F625
ZTE-F625
gpon
ZTE-F640
ZTE-F640
gpon
ZTE-F641
ZTE-F641
ZXAN(config-pon)#show onu-type epon
ZXAN(config-pon)#show onu-type gpon
Pon Type
Onu type
Description
-------------------------------------------gpon
ZTE-F601
ZTE-F601
gpon
ZTE-F621
ZTE-F621
gpon
ZTE-F622
ZTE-F622
gpon
ZTE-F625
ZTE-F625
gpon
ZTE-F640
ZTE-F640
gpon
ZTE-F641
ZTE-F641
ZXAN(gpon-onu-mng)#
Related
Commands
None
show onu-if
Syntax
Purpose
Usage Guidelines
Mode
Example
show onu-if onu-type-name
To display the ONU interface information
Parameter
Description
Value
onu-type-name
ONU name
Range: 1 – 63
characters
The following example displays the ONU interface information:
ZXAN(config-pon)#show onu-if ZTE-F888
Onu type name : ZTE-F888
Interface list
eth_0/1
291
eth_0/2
eth_0/3
eth_0/4
pots_0/1
pots_0/2
ZXAN(gpon-onu-mng)#
Related
Commands
None
show onu-type-attr gpon
Syntax
Purpose
Usage Guidelines
Mode
Example
show onu-type-attr gpon onu type name
To query the ONU profile property information
Parameter
Description
Value
onu type name
ONU type name
Range: 1 – 64
The following example displays how to query ONU profile property
information:
ZXAN#show onu-type-attr
Onu type name :
Pon type :
Description :
Max tcont :
Max gemport :
Max bridge per slot :
Max uplink per bridge :
Related
Commands
gpon ZTE-F888
ZTE-F888;
gpon;
new-onu;
255;
255;
8;
255.
None
ip-pool epon
Syntax
ip-pool epon pool-name begin begin-ip-address end last-ip-add
ress net-mask vlan vlanid priority priority mgm-ip mgmip netmask gateway
no ip-pool epon pool-name
Purpose
Usage Guidelines
292
To configure the EPON address pool
Parameter
Descripiton
Value
pool-name
Address pool name
Range: 1 – 16
characters
begin begin-ip-addr
ess
Begin IP address
A.B.C.D
Mode
Example
Parameter
Descripiton
Value
end last-ip-address
End IP address
A.B.C.D
net-mask
Net mask
A.B.C.D
vlan vlanid
VLAN ID
Range: 1 – 4094
priority priority
Priority
Range: 0 – 7
mgm-ip mgmip
Remote management
IP address
A.B.C.D
gateway
Gateway
A.B.C.D
ZXAN(config-pon)#
The following example displays how to configure the EPON address
pool:
ZXAN(config-pon)# ip-pool epon zxan begin 100.1.1.1 end 100.1.1.10
255.255.255.0
priority 7 mgm-ip 100.1.1.200 255.255.255.0 100.1.1.198
Related
Commands
Related
Information
None
One address pool can be configured with multiple address segments. Each address segment can allocate at most 4096 addresses.
power-switch
Syntax
Purpose
Usage Guidelines
Mode
Example
power-switch power-no power-no
To switch power to specified power module
Parameter
Description
Value
power-no power-no
Power module number
Range: 1 – 2
ZXAN(config-pon)#
The following example displays how to switch the power to specified power module:
ZXAN(config-pon)# power-switch power-no 1
293
Related
Commands
None
show performance olt
Syntax
Purpose
Usage Guidelines
Mode
Example
show performance olt {current | history} [gpon-olt_shelf/slo
t/oltId]
To display the OLT current and past performance information
Parameter
Description
Value
current
Current performance
information
-
history
Past information
-
ltId
GPON card shelf
number, clot number
and OLT ID
Range: 1 – 19
characters
The following example displays the OLT current and past performance information:
ZXAN(config-if)#show performance olt current
gpon-olt_0/9/1
gpon-olt_0/9/1:
Current Olt Performance Statistics Data:
NonIdleGemFramesUpstream:
0,
IdleGemFramesUpstream:
0.
ErroredGemFramesUpstream:
0,
GemPayloadBytesUpstream:
0.
CorrectEthernetFramesUpstream:0,
ErroredEthernetFramesUpstream:0.
TotalOmciFramesUpstream:
0,
ERR:
0.
REI:
0,
ValidEthernetPacketDownstream:0.
CpuPacketDownstream:
0,
PloamDownstream:
0.
PloamUpstream:
0,
InvalidPacketUpstream:
0.
ZXAN(config-if)#
Related
Commands
None
show performance onu
Syntax
Purpose
Usage Guidelines
294
show performance onu {current | history} [gpon-olt_shelf/sl
ot/oltId] [onu-id]
To display the ONU current and history performance information
Mode
Example
Parameter
Description
Value
current
Current performance
information
-
history
History information
-
ltId
GPON card shelf
number, slot number
and OLT ID
Range: 1 – 19
characters
onu-id
ONU ID
Range: 1 – 128
The following example displays the ONU current and history performance information:
ZXAN(config-if)#show performance onu history
gpon-olt_0/9/1
ZXAN(config-if)#
Related
Commands
None
295
296
Chapter
8
Ethernet Interface
Configuration
Table of Contents
byname ......................................................................... 298
clear counter .................................................................. 298
description ..................................................................... 299
duplex ........................................................................... 299
flowcontrol ..................................................................... 300
hybrid-attribute............................................................... 300
interface ........................................................................ 301
jumbo-frame .................................................................. 301
monitor session............................................................... 302
monitor session (Port)...................................................... 302
multicast ........................................................................ 303
negotiation auto .............................................................. 304
range............................................................................. 304
shutdown ....................................................................... 305
speed ............................................................................ 305
port-protect .................................................................... 306
trust-cos ........................................................................ 306
trust-dscp ...................................................................... 307
ip address-group ............................................................. 307
ip arp inspection trust ...................................................... 308
traffic-shape ................................................................... 308
priority........................................................................... 309
lacp timeout ................................................................... 309
lacp port-priority ............................................................. 310
rmon collection statistics .................................................. 310
rmon collection history ..................................................... 311
eth-switch broadcast-limit ................................................ 311
eth-switch multicast-limit ................................................. 312
eth-switch unkowncast-limit.............................................. 312
eth-switch port-protect .................................................... 313
eth-switch mac-protect .................................................... 313
eth-switch vlan-limit ........................................................ 314
eth-switch mac-anti-spoofing ............................................ 314
show eth-switch .............................................................. 315
show eth-switch vlan-limit ................................................ 315
show interface ................................................................ 316
show ip interface ............................................................. 318
show monitor session....................................................... 319
297
byname
Syntax
byname byname
no byname
Purpose
Usage Guidelines
Mode
Example
To configure the interface byname
Parameter
Description
Value
by-name
Byname
Range: 1 – 32
characters
ZXAN(config-if)#
The following example displays how to configure tinterface byname:
ZXAN(config-if)#byname ether1
ZXAN(config-if)#exit
ZXAN(config)#interface byname ether1
ZXAN(config-if)#
Related
Commands
Related
Information
interface
After configuring byname, use byname to enter this interface configuration mode directly.
clear counter
Syntax
Purpose
Usage Guidelines
Mode
Example
clear counter {ethernet | olt | onu} [interface-name]
To clear interface statistics
Parameter
Description
Value
interface-name
Interface name
-
ZXAN#
The following example displays how to clear interface statistics:
ZXAN#clear counter gei_0/6/1
Related
Commands
Related
Information
298
show interface
Execute this command to clear all interface statistics unless an
interface name is specified.
Chapter 8 Ethernet Interface Configuration
description
Syntax
description string
no description
Mode
Usage Guidelines
Mode
Example
To give description to interface
Parameter
Description
Value
string
Interface description
Range: 1 – 20
characters
ZXAN(config-if)#
The following example displays how to give description to interface:
ZXAN(config-if)#description "this is GigabitEthernet Interface"
Related
Commands
None
duplex
Syntax
duplex {half | full}
no duplex
Mode
Usage Guidelines
Mode
Example
To configure the port work mode as duplex
Parameter
Description
Value
half
Half duplex mode
-
full
Full duplex mode
-
ZXAN(config-if)#
The following example displays how to configure the port work
mode as duplex:
ZXAN(config-if)#no negotiation auto
ZXAN(config-if)#duplex full
Related
Commands
Related
Information
negotiation auto
Fast Ethernet electric port and Giga Ethernet electric port support
half duplex and full duplex modes. Fast Ethernet optical port, Giga
Ethernet optical port and 10-Giga Ethernet port support full duplex
mode only.
299
Before duplex configuration, disable self-negotiation mode.
flowcontrol
Syntax
flowcontrol {enable | disable}
no flowcontrol
Purpose
Usage Guidelines
Mode
Example
To enable or disable the flow control
Parameter
Description
Value
enable
Enable the flow
control
-
disable
Disable the flow
control
-
ZXAN(config-if)#
The following example displays how to disable the flow control:
ZXAN(config-if)#flowcontrol disable
ZXAN(config-if)#
Related
Commands
None
hybrid-attribute
Syntax
Purpose
Usage Guidelines
Mode
Example
hybrid-attribute {fiber | copper}
To configure the Giga Ethernet interface property
Parameter
Description
Value
fiber
Fiber port
-
copper
Copper port
-
ZXAN(config-if)#
The following example displays how to configure the Giga Ethernet
interface property:
ZXAN(config-if)#hybrid-attribute copper
ZXAN(config-if)#
300
Related
Commands
Related
Information
None
Before executing this command to transfer fiber to copper, or copper to fiber, ensure that the interface supports both fiber mode
and copper mode.
interface
Syntax
interface {interface-name | byname byname}
no interface {interface-name | byname byname}
Purpose
Usage Guidelines
Mode
Example
To enter into an interface mode
Parameter
Description
Value
interface-name
Interface name
adsl_1/17,
byname, gei_1/21,
loopback, mng,
null, smartgroup,
supervlan, tunnel,
vdsl_1/4, vlan
byname byname
Byname
Range: 1 - 32
characters
ZXAN(config)#
The following example displays how to enter into interface mode:
ZXAN(config-if)#
Related
Commands
Related
Information
show interface
The no command is invalid for physical interfaces. Both the no
interface byname byname and the no interface interface-name
commands are used to delete the interface.
Only when the interface byname for the interface is set, it is possible to enter the configuration mode of this interface using the
byname parameter.
jumbo-frame
Syntax
jumbo-frame {enable | disable}
no jumbo-frame
Purpose
Usage Guidelines
To allow or deny the jumbo frame
301
Mode
Example
Parameter
Description
Value
enable
Allow jumbo frame
-
disable
Deny jumbo frame
-
ZXAN(config-if)#
The following example displays how to disable the jumbo frame:
ZXAN(config-if)#jumbo-frame disable
ZXAN(config-if)#
Related
Commands
None
monitor session
Syntax
monitor session session-number
no monitor session session-number
Purpose
Usage Guidelines
Mode
Example
To create a session
Parameter
Description
Value
session-number
Session number
Range: 1 – 1
ZXAN(config)#
The following example displays how to create a session:
ZXAN(config)#monitor session 1
ZXAN(config)#
Related
Commands
Related
Information
show monitor session
Use the no command to delete the session. All the configured
source ports and destination ports in that session are deleted.
monitor session (Port)
Syntax
monitor session session-number {destination | source [direc
tion {both | tx | rx}]}
no monitor session
Purpose
Usage Guidelines
302
To add a source or destination port to a session
Mode
Example
Parameter
Description
Value
session-number
Session number
Range: 1 – 1
destination
Destination port
-
source
Source port
-
direction
Traffic collection
direction of the source
port
-
both
Traffic collection
direction of source
port to both Rx and
Tx
-
tx
Traffic collection
direction of source
port to Tx
-
rx
Traffic collection
direction of source
port to Rx
-
ZXAN(config-if)#
The following example displays how to add a source or a destination port to a session:
ZXAN(config-if)#monitor session 1 source direction tx
ZXAN(config-if)#monitor session 1 destination
ZXAN(config-if)#
Related
Commands
Related
Information
Each session can be configured with up to eight source ports and
one destination port. Each port can be either the source or the
destination, but not both.
When configuring the source/destination port, if the session
number does not exist, create a session first, and then add the
source/destination port. When configuring the destination port, if
the session already holds a destination port, the configuration is
invalid.
If the source/destination port of each session are on the same line
interface card, the system supports up to eight sessions. If the
source/destination port of each session are not on the same line
interface card, only one session is allowed.
multicast
Syntax
multicast ttl-threshold value
no multicast-limit
Purpose
To configure the multicast TTL threshold value
303
Usage Guidelines
Mode
Example
Parameter
Description
Value
ttl-threshold value
TTL threshold value
Range: 0 – 255
ZXAN(config-if)#
The following example displays how to configure the multicast TTL
threshold value:
ZXAN(config-if)#multicast ttl-threshold 10
ZXAN(config-if)#
Related
Commands
None
negotiation auto
Syntax
negotiation auto
no negotiation auto
Purpose
Usage Guidelines
Mode
Example
To activate the auto-negotiation link for the Ethernet interface
None
ZXAN(config-if)#
The following example displays how to activate auto-negotiation
link for the Ethernet interface:
ZXAN(config-if)#negotiation auto
ZXAN(config-if)#
Related
Commands
show interface
range
Syntax
Purpose
Usage Guidelines
Mode
Example
range
To display port list
None
ZXAN(config-if)#
The following example displays port list:
Portlist of the range: gei_0/6/1
304
Related
Commands
None
shutdown
Syntax
shutdown
no shutdown
Purpose
Usage Guidelines
Mode
Example
To enable/disable the interface
None
ZXAN(config-if)#
The following example displays how to the enable/disable interface:
ZXAN(config-if)#no shutdown
Related
Commands
Related
Information
None
shutdown command disables an interface. However, it does not
affect the interface physical state.
speed
Syntax
speed {10 | 100 | 1000}
no speed
Purpose
Usage Guidelines
Mode
Example
To configure the interface force rate
Parameter
Description
Value
10
Set interface rate to
be 10 Mbps
-
100
be 100 Mbps
-
1000
be 1000 Mbps
-
ZXAN(config-if)#
The following example displays how to configure interface force
rate:
ZXAN(config-if)#no negotiation auto
ZXAN(config-if)#speed 1000
305
Related
Commands
Related
Information
show interface
In rate configuration, disable self-negotiation mode.
port-protect
Syntax
Purpose
Usage Guidelines
Mode
Example
port-protect {enable | disable}
To enable or disable the port protection
Parameter
Description
Value
enable
Enable the port
protection
-
disable
Disable the port
protection
-
ZXAN(config-if)#
The following example displays how to enable the port protection
function:
ZXAN(config-if)#port-protect enable
ZXAN(config-if)#
Related
Commands
None
trust-cos
Syntax
Purpose
Usage Guidelines
Mode
Example
trust-cos {enable | disable}
To enable/disable the port CoS mapping function
Parameter
Description
Value
enable
Enable CoS mapping
function
-
disable
Disable CoS mapping
function
-
ZXAN(config-if)#
The following example displays how to enable the port CoS mapping function
ZXAN(config-if)#trust-cos enable
306
Related
Commands
trust-dscp
trust-dscp
Syntax
Purpose
Usage Guidelines
Mode
Example
trust-dscp {enable | disable}
To enable/disable the DSCP mapping function
Parameter
Description
Value
enable
Enable DSCP mapping
function
-
disable
Disable DSCP
mapping function
-
ZXAN(config-if)#
The following example displays how to enable the DSCP mapping
function:
ZXAN(config-if)#trust-dscp enable
Related
Commands
trust-cos
ip address-group
Syntax
Purpose
Usage Guidelines
ip address-group acl-number/acl-name in
To configure the uplink port access control
Parameter
Description
Value
acl-number/acl-name
ACL number or ACL
name
Range: 1 – 349
Extension range:
1000 – 1999
IPv6 usage range:
2000 – 2999
ACL name range: 1
– 31 characters
Mode
Example
ZXAN(config-if)#
The following example displays how to configure the uplink port
access control:
307
ZXAN(config-if)# ip access-group 300 in
Related
Commands
None
ip arp inspection trust
Syntax
Purpose
Usage Guidelines
Mode
Example
ip arp inspection trust
To configure the dynamic ARP inspection trust port
None
ZXAN(config-if)#
The following example displays how to configure dynamic ARP inspection trust port:
ZXAN(config-if)# ip arp inspection trust
Related
Commands
Related
Information
None
This command is a part of dynamic ARP inspection. The purpose
is to set the port as dynamic ARP inspection trust port. If it is a
trust port, the inspection is not made after ARP packet is received.
If it is not a trust port, the inspection is made. The command is
used together with DHCP snooping.
traffic-shape
Syntax
Purpose
Usage Guidelines
Mode
Example
traffic-shape rate-limit rate bucket-size bucket-size out
To configure the uplink interface outgoing traffic shape parameters
Parameter
Description
Value
rate-limit rate
Rate limit
Range: 64 – 1000000
Kbps
bucket-size
bucket-size
Bucket size
Range: 4 – 16000
Kilo bytes
out
Egress
-
ZXAN(config-if)#
The following example displays how to configure the uplink interface outgoing traffic shape parameters:
ZXAN(config-if)# traffic-shape rate-limit 1000 bucket-size 100 out
308
Related
Commands
None
priority
Syntax
Purpose
Usage Guidelines
Mode
Example
priority priority
To configure the port priority
Parameter
Description
Value
priority
Priority
Range: 0 – 7
ZXAN(config-if)#
The following example displays how to configure the port priority:
ZXAN(config-if)# priority 7
Related
Commands
None
lacp timeout
Syntax
Purpose
Usage Guidelines
Mode
Example
lacp timeout {long | short}
To configure the interface LACP timeout
Parameter
Description
Value
long
LACP long timeout
-
short
LACP short timeout
-
ZXAN(config-if)#
The following example displays how to configure the interface LACP
to short timeout:
ZXAN(config-if)#lacp timeout short
ZXAN(config-if)#
Related
Commands
Related
Information
show lacp
By default, long timeout is configured.
When the long timeout is configured, the system sends LACP packets every 30 seconds.
309
When the short timeout is configured, the system sends LACP
packets every one second.
lacp port-priority
Syntax
Purpose
Usage Guidelines
Mode
Example
lacp port-priority port-priority
To configure the LACP port priority
Parameter
Description
Value
port-priority
Port priority
Range: 1 – 65535
ZXAN(config-if)#
The following example displays how to configure the LACP port
priority:
ZXAN(config-if)# lacp port-priority 10
Related
Commands
None
rmon collection statistics
Syntax
Purpose
Usage Guidelines
Mode
Example
rmon collection statistics index [owner owner]
To configure uplink port statistics information
Parameter
Description
Value
index
Statistics index
Range: 1 – 65535
owner owner
Statistics owner
Range: 1 – 30
characters
ZXAN(config-if)#
The following exampled displays how to configure uplink port statistics information:
ZXAN(config-if)# rmon collection statistics 1 owner zte
310
Related
Commands
None
rmon collection history
Syntax
Purpose
Usage Guidelines
Mode
Example
rmon collection history index [owner owner] [bucket value]
[interval interval]
To configure the uplink port history sampling parameters
Parameter
Description
Value
index
History sampling information index
Range: 1 – 65535
owner owner
Sample owner
Range: 1 – 30 characters
bucket value
Sample numbers
Range: 1 – 100
interval interval
Sampling interval
ZXAN(config-if)#
The following example displays how to configure the uplink port
history sampling parameters:
ZXAN(config-if)# rmon collection history 1 owner zte
Related
Commands
None
eth-switch broadcast-limit
Syntax
eth-switch broadcast-limit num
no eth-switch broadcast-limit
Purpose
Usage Guidelines
To configure the broadcast limit
Parameter
Description
Value
num
Broadcast limit
Range: 0 – 65534 pps
Default: 100 pps
Mode
Example
ZXAN(config)#
The following example displays how to configure the broadcast
limit:
ZXAN(config)#eth-switch broadcast-limit 200
311
ZXAN(config)#
Related
Commands
show eth-switch
eth-switch multicast-limit
Syntax
eth-switch multicast-limit num
no eth-switch multicast-limit
Purpose
Usage Guidelines
Mode
Example
To configure the global multicast packet limit
Parameter
Description
Value
num
Multicast packet limit
numbers
ZXAN(config)#
The following example displays how to configure global multicast
packet limit:
ZXAN(config)#eth-switch multicast-limit 100
Related
Commands
show eth-switch
eth-switch unkowncast-limit
Syntax
eth-switch unknowncast-limit num
no eth-switch unknowncast-limit
Purpose
Usage Guidelines
To configure unknowncast limit
Parameter
Description
Value
num
Unknowncast limit
Default: 100 pps
Mode
Example
ZXAN(config)#
The following example displays how to configure the unknowncast
limit:
ZXAN(config)#eth-switch unkowncast-limit 1000
ZXAN(config)#
312
Related
Commands
None
eth-switch port-protect
Syntax
eth-switch port-protect {enable | disable}
Purpose
To enable or disable the global user port protection
Usage Guidelines
Mode
Example
Parameter
Description
Value
enable
Enable port protection
-
disable
Disable port
protection
-
ZXAN(config)#
The following example displays how to disable the global user port
protection:
ZXAN(config)#eth-switch port-protect disable
Related
Commands
Related
Information
show eth-switch
By default, global user port protection is enabled.
eth-switch mac-protect
Syntax
eth-switch mac-protect mac-address vlan vlan
no eth-switch mac-protect mac-address vlan vlan
Purpose
Usage Guidelines
Mode
Example
To configure the global MAC+VLAN anti-floating policy
Parameter
Description
Value
mac-address
MAC address
XXXX.XXXX.XXXX
vlan vlan
VLAN ID
Range: 1 – 4094
ZXAN(config)#
The following example displays how to configure the global
MAC+VLAN anti-floating policy:
ZXAN(config)#eth-switch mac-protect 0000.0011.2233 vlan 100
Related
Commands
show eth-switch
313
Related
Information
At most 16 MAC+VLAN anti-floating policies can be configured.
eth-switch vlan-limit
Syntax
eth-switch vlan-limit vlan vlan rate rate {upstream | downs
tream}
no eth-switch vlan-limit vlan vlan {upstream | downstream}
Purpose
Usage Guidelines
To configure the global VLAN rate limit policy
Parameter
Description
Value
vlan vlan
VLAN ID
Range: 1 – 4094
rate rate
Rate
Range: 64 –
10000000 Kbps
Granularity: 64 Kbps
Mode
Exammple
upstream
Upstream rate
-
downstream
Downstream rate
-
ZXAN(config)#
The following example displays how to configure the global VLAN
rate limit policy:
ZXAN(config)#eth-switch vlan-limit vlan 100 rate 64 downstream
Related
Commands
Related
Information
show eth-switch vlan-limit
�
At most 64 VLAN rate limit policies can be configured.
�
The configured rate granularity is 64 Kbps. Valid value is multiple of 64.
eth-switch mac-anti-spoofing
Syntax
eth-switch mac-anti-spoofing [enable | disable]
no eth-switch mac-anti-spoofing
Purpose
Usage Guidelines
314
To enable or disable the MAC address anti-spoofing operation
Mode
Example
Parameter
Description
Value
enable
Enable MAC address
anti-spoofing
-
disable
Disable MAC address
anti-spoofing
-
ZXAN(config)#
The following example displays how to enable the MAC address
anti-spoofing operation:
ZXAN(config)#eth-switch mac-anti-spoofing enable
ZXAN(config)#
Related
Commands
None
show eth-switch
Syntax
Purpose
Usage Guidelines
Mode
Example
show eth-switch
To display the Ethernet switch information
None
The following example displays the Ethernet switch information:
ZXAN#show eth-switch
broadcast-limit :100 pps
unkowncast-limit :100 pps
multicast-limit :disable
mac-anti-spoofing:disable
port-protect
:disable
ZXAN#
Related
Commands
None
Syntax
Purpose
Usage Guidelines
Mode
Example
To display the VLAN rate limit policy configuration
None
ZXAN#
The following example displays the VLAN rate limit policy configuration:
ZXAN(config)#show eth-switch vlan-limit
the total vlan-limit rule numbers:1
-------------------------------------vlan
rate(unit:kbps)
direction
-------------------------------------100
128
upstream
315
Related
Commands
None
show interface
Syntax
Purpose
Usage Guidelines
Mode
Example
show interface interface
To display the detailed statistics of interface
Parameter
Description
Value
interface
Interface name
adsl_1/17,
port-status, gei_1/21,
loopback, mng,
null, smartgroup,
supervlan, tunnel,
vdsl_1/4, vlan
The following example displays the detailed statistics of the interface:
�
Loopback interface
ZXAN#show interface loopback1
loopback1 is up, line protocol is up
Description is none
Keepalive set:10 sec
Internet address is unassigned
MTU 1500 bytes
MRU 1500 bytes
BW 8000000 Kbits
ZXAN#
�
Null interface
ZXAN#show interface null1
null1 is up, line protocol is up
Description is none
BW 10000000 Kbits
ZXAN#
�
Smartgroup interface
ZXAN#show interface smartgroup1
smartgroup1 is up, line protocol is down
Description is none
VLAN mode is hybrid, pvid 1
ZXAN#
�
VLAN interface
ZXAN#show interface vlan1
vlan1 is up, line protocol is up
Description is none
MAC address is 00d0.d0c7.ffe0
316
ARP Timeout:00:05:00
Internet address is unassigned
MTU 1500 bytes
MRU 1500 bytes BW 1000000 Kbits
ZXAN#
�
gei_1/21/1 interface
ZXAN#show interface gei_1/21/1
gei_1/21/1 is down, line protocol is down
Description is none
The port is optical
Duplex full
scramble payload-enable
VLAN mode is access, pvid 1BW 1000000 Kbits
Last clearing of "show interface" counters never
120 seconds input rate :0 Bps,
0 pps
120 seconds output rate:0 Bps,
0 pps
Interface peak rate :
input
0 Bps, output
0 Bps
Interface utilization: input 0%, output
0%
Input:
Packets
: 0
Bytes
: 0
Unicasts
: 0
Multicasts: 0
Broadcasts
: 0
Undersize : 0
Oversize
: 0
CRC-ERROR : 0
Dropped
: 0
Fragments : 0
Jabber
: 0
MacRxErr : 0
Output:
Packets
: 0
Bytes
: 0
Unicasts
: 0
Multicasts: 0
Broadcasts
: 0
Collision : 0
LateCollision: 0
Total:
64B
: 0
65-127B
: 0
128-255B : 0
256-511B : 0
512-1023B : 0
1024-2018B: 0
ZXAN#
The following table describes the parameters displayed in the
example:
Parameter
Description
gei_1/21/1 is down
Administration state of interface
is down
line protocol is up
Administration state of interface
is available
Description
Interface description
Duplex
Interface work mode: full or
half duplex
The port is electric
Electrical or optical interface
vlan
Interface VLAN information
MTU
Interface MTU value
BW
Interface bandwidth
MAC
Interface MAC address
Input, Output, Total
Interface statistics
317
Related
Commands
None
show ip interface
Syntax
show ip interface [brief] [interface-name]
show ip interface [ | {begin | exclude | include} line]
Purpose
Usage Guidelines
Mode
Example
To display the interface state and configuration information
Parameter
Description
Value
brief
Brief summary
of IP status and
configuration
-
interface-name
Interface name
adsl_1/17, gei_1/21,
loopback, mng,
null, smartgroup,
supervlan, tunnel,
vdsl_1/4, vlan
|
Output modifier
-
begin
Begin with the line
that matches
-
exclude
Exclude the line that
matches
-
include
Include the line that
matches
-
line
Line
-
The following example displays the interface status and configuration information:
ZXAN#show ip interface brief
interface IP-Address
Mask
AdminStatus PhyStatus Protocol
vlan1
unassigned
unassigned
up
up
up
vlan100
10.63.184.213 255.255.255.0 up
up
up
vlan200
unassigned
unassigned
up
up
down
ZXAN#
Related
Commands
Related
Information
None
show ip interface command displays information about all the
interfaces configured.
show ip interface interface-name command displays the specified interface information.
show ip interface brief command displays the summary of all
the interfaces.
318
show ip interface brief interface-name command displays the
summary of the specified interface.
Syntax
Purpose
Usage Guidelines
Mode
Example
show monitor session {session-number}
To display the detailed information about user defined sessions
Parameter
Description
Value
session-number
Session number
Range: 1 – 1
The following example displays the detailed information about user
defined sessions:
ZXAN#show monitor session 1
Session 1
-----------Source Ports:
Port: gei_1/21/1 Monitor Direction: both
Destination Port:
Port:
ZXAN#
Related
Commands
monitor session
319
320
Chapter
9
Uplink Port Protection
Configuration
Table of Contents
uaps-group..................................................................... 321
revertive ........................................................................ 322
Protect-time ................................................................... 322
swap ............................................................................. 323
switch ............................................................................ 323
retry-link-detect .............................................................. 323
interval-link-detect .......................................................... 324
port master-portlist ......................................................... 324
show uaps groupid .......................................................... 325
uaps-group
Syntax
uaps-group groupid [mode {csc-swap | port-swap}]
no uaps-group groupid
Purpose
User Guidelines
Mode
Example
To create or delete UAPS group
Parameter
Description
Value
groupid
UAPS group ID
Range: 1 – 4
port-swap
Port swap
–
csc-swap
Control and switch
card swap
–
ZXAN(config)#
The following example displays how to create or delete UAPS
group:
ZXAN(config)#uaps-group 1
Related
Commands
None
321
Related
Information
By default, UAPS group is in port swap mode.
revertive
Syntax
Purpose
User Guidelines
Mode
Example
revertive {enable | disable}
To enable/disable revertive function for UAPS group
The following example displays how to enable/disable revertive
function for UAPS group:
Parameter
Description
Value
enable
Enable revertive
function
–
disable
Disable revertive
function
–
ZXAN(cfg-uaps-groupid)#
The following example displays how to enable/disable revertive
function for UAPS group:
ZXAN(cfg-uaps-1)# revertive enable
Related
Commands
None
Protect-time
Syntax
Purpose
User Guidelines
Mode
Example
protect-time time
To configure protection time for UAPS group
The following example displays how to configure protection time
for uaps group:
Parameter
Description
Value
time
Protection time
Range: 10 - 900 sec
The following example displays how to configure protection time
for uaps group:
ZXAN(cfg-uaps-1)#protect-time 400
Related
Commands
322
None
Chapter 9 Uplink Port Protection Configuration
Related
Information
By default, the protection time is 300 seconds.
swap
Syntax
Purpose
User Guidelines
Mode
Example
swap
To force switch UAPS group
None
The following example displays how to force switch uaps group:
ZXAN(cfg-uaps-1)# swap
Related
Commands
None
switch
Syntax
Purpose
User Guidelines
Mode
Example
switch {common-port | trunking-port}
To modify UAPS group property
Parameter
Description
Value
common-port
Common port
property
–
trunking-port
Trunking port
property
–
The following example displays how to modify UAPS group property:
ZXAN(cfg-uaps-1)# switch common-port
Related
Commands
None
retry-link-detect
Syntax
Purpose
User Guidelines
retry-link-detect num
To configure retry times for ping next hop link detection
Parameter
Description
Value
num
Retry times
Range: 1 – 10
323
Mode
Example
The following example displays how to configure retry times for
ping next hop link detection:
ZXAN(cfg-uaps-1)# retry-link-detct 3
Related
Commands
Related
Information
None
This command is valid when next-hop is configured. By default,
the retry times is 5.
interval-link-detect
Syntax
Purpose
User Guidelines
Mode
Example
interval-link-detect time
To configure detection period for ping next-hop link detection
Parameter
Description
Value
time
Detection time
Range: 1 – 10 sec
The following example displays how to configure detection period
for ping next-hop link detection:
ZXAN(cfg-uaps-1)# interval-link-detct 3
Related
Commands
None
port master-portlist
Syntax
port master-portlist portlist slave-portlist portlist
no port master-portlist portlist
Purpose
User Guidelines
Mode
Example
To add or delete port to/from uplink group
Parameter
Description
Value
portlist
Uplink port list
–
The following example displays how to add or delete port to/from
uplink group:
ZXAN(cfg-uaps-1)#port master-portlist gei_0/9/1 slave-portliste gei_0/9/2
Related
Commands
324
None
Chapter 9 Uplink Port Protection Configuration
Related
Information
Currently only one pair of ports can be added once.
When the created group is in csc-swap mode, master port should
be consistent with slave port.
show uaps groupid
Syntax
show uaps groupid groupid
Purpose
To display UAPS group status
User Guidelines
Mode
Example
Parameter
Description
Value
groupid
Group ID
Range: 1 – 4
The following example displays UAPS group status:
ZXAN(config)#show uaps groupid 1
Swap mode
: port-swap
Revertive control
: enble
Protection time
: 400s
Switch type
: trunk port
In protected time
: no
Reserve swap type
: none
Last swap request type
: none
Last swap type
: none
Master ports status
: forwarding
gei_0/9/1 : up
Slave ports status
: block
gei_0/9/2 : down
Related
Commands
None
325
326
Tables
Table 1 Chapter Summary .................................................... i
Table 2 Typographical Conventions .........................................ii
Table 3 Mouse Operation Conventions ................................... iii
327
328
Index
A
abort onu-version .............. 51
action ..................... 106, 128
activate onu-version .......... 52
admin-status ........... 264, 271
au-3 .............................. 268
au-4 tug3 ....................... 268
authtype .......................... 88
B
bandwidth-profile .............. 52
ber .................................. 89
bridge ............................ 129
bridge-port
host-bind ............... 131, 221
bridge-port ip-host .......... 221
bridge-port uni
traffic-limitcont .............. 132
bridge-port uni-bind......... 130
bridge-port uniu .............. 131
bridge-port uplink............ 133
broadcast ......................... 89
byname ......................... 298
C
ces ................................ 255
clear counter .................. 298
clear lacp ......................... 21
clock-source ................... 264
commit onu-version ........... 53
D
description ........ 90, 107, 299
device admin-state .......... 134
device battery-backup...... 134
device sec-mode ............. 135
dhcp-option82 trust ......... 107
dial-plan........................... 73
dial-plan-table .................. 72
discover-period ................. 90
dot1p-to-queue-map.......... 91
dot1x............................. 135
dot1x ethuni ................... 136
duplex ........................... 299
E
eth-switch broadcast-limit ...................... 311
eth-switch
mac-anti-spoofing .......... 314
eth-switch mac-protect .... 313
eth-switch multicast-limit ...................... 312
eth-switch port-protect..... 313
eth-switch unknowncast-limit ...................... 312
eth-switch vlan-limit ........ 314
ex-vlan bridge-port uni..... 137
ex-vlan bridge-port
uplink ........................... 138
ex-vlan eth ..................... 139
ex-vlan-table bridge-port
uni ............................... 140
uplink ........................... 140
ex-vlan-table eth ............. 141
F
fec .................................. 91
filter-rule.......................... 74
flood bandwidth .......... 75, 92
flowcontrol ..................... 300
framing .......................... 267
G
gemport ......................... 108
gemport priority-regeneration ............................ 111
gemport priority-regeneration mode.................... 111
gemport-weight-mgmt ..... 109
gpon................................ 51
H
hybrid-attribute............... 300
I
innerport .......................... 54
instance .............................1
interface ........... 22, 106, 301
interface ces admin-state ...................... 142
interface ces arc.............. 142
interface ces ds1-framing ............................... 143
interface ces ds1-mode .... 143
329
interface ces expect-type ...................... 145
interface ces line-coding ............................... 145
interface ces
line-length .................... 146
interface ces loopback ...... 147
interface eth admin-state ...................... 147
interface eth arc .............. 148
interface eth bridgeOrIP ............................. 148
interface eth dot1p-mapper............................... 149
interface eth eth-loop....... 150
interface eth expect-type ...................... 150
interface eth
max-frame .................... 151
interface eth
pause-time.................... 151
interface eth power-control .............................. 152
interface eth pppoe-filter ............................... 152
interface eth speed .......... 153
interface eth wiring.......... 154
interface gemport
bridge .......................... 165
interface gemport
dot1p-bridge ................. 166
interface gemport uni....... 167
interface gpon-olt_x/x/x..... 88
interface gpon-onu .......... 105
interface pon alarm ......... 154
interface pon
current-threshold ........... 155
interface pon
gem-blocklen................. 159
interface pon
rx-optical-threshold ........ 155
interface pon
sf-threshold............ 156, 158
interface pon
tx-optical-threshold ........ 157
interface pon
vol-threshold ................. 158
interface pots
admin-state ........... 159, 222
interface pots arc ..... 160, 223
interface pots
impedance ............. 160, 223
interface pots
rx-gain .................. 161, 224
interface pots
tx-gain .................. 161, 224
interface pots
tx-path .................. 162, 225
interface tdm_X/X/X ........ 263
330
interface uplink
dot1p-mapper ............... 162
interface video
admin-state .................. 163
interface video arc ........... 164
interface video
power-control ................ 164
interval-link-detect .......... 324
ip access-group ................. 92
ip address-group ............. 307
ip arp inspection trust ...... 308
ip dhcp database ............... 41
ip dhcp enable .................. 38
ip dhcp helper-address ....... 43
ip dhcp logging on ............. 38
ip dhcp mode .................... 39
ip dhcp proxy client
leasetime ........................ 42
ip dhcp relay agent ............ 44
ip dhcp relay server ........... 44
ip dhcp relay server retry..... 41
ip dhcp relay server
vclass-id ......................... 43
ip dhcp relay update arp..... 42
ip dhcp server dns ............. 47
ip dhcp server gateway ...... 49
ip dhcp server leasetime..... 48
ip dhcp server update
arp................................. 48
ip dhcp snooping ............... 33
ip dhcp snooping enable ..... 33
ip dhcp snooping quota ...... 34
ip dhcp snooping trust........ 34
ip dhcp snooping vlan ........ 35
ip dhcp user quota............. 39
ip local pool ...................... 46
ip local pool conflict-ip........ 47
ip pim snooping................. 27
ip-address ...................... 258
ip-host dhcp-enable ......... 225
ip-host id ....................... 226
ip-host ip ....................... 226
ip-host primary-dns ......... 227
ip-pool epon ................... 292
J
jumbo-frame .................. 301
L
lacp port-priority ........22, 310
lacp timeout ..............23, 309
line-coding ..................... 265
line-type ........................ 266
linktrap ............................ 93
lock ................................. 93
loopback ........................ 266
Index
M
mac-address ................... 258
mac-filter ip-host...... 167, 228
mac-filter uni .................. 168
mac-filter uplink .............. 169
max-mac-learn ............... 110
mc-interwork .................. 169
monitor session............... 302
multicast ........................ 303
multicast bandwidth........... 94
N
name .............2, 95, 112, 271
negotiation auto .............. 304
O
onu-batch-cfg ................... 55
onu-def-reg ...................... 95
onu-if ............................ 281
onu-state ....................... 112
onu-type ........................ 280
onu-type-attr gpon .......... 280
onu-ver............................ 54
P
peer default ip pool............ 49
performance bridge-port
ip-host .................. 175, 228
uni ............................... 172
uplink ........................... 173
performance
call-ctrl .................. 176, 229
performance ces.............. 174
performance cesmsb2 ...... 282
performance cesprotocol ............................... 282
performance cesrfc1213......................... 283
performance cesrfc1757......................... 284
performance cesrsb1........ 286
performance
cesvc12v5..................... 288
performance
cesvc12v5rei ................. 288
performance cesvc4b3 ..... 287
performance ceswanport ............................. 284
performance dot1x
ethuni .......................... 170
performance eth.............. 170
performance gal-eth ........ 171
performance gem ............ 171
performance GponOlt ....... 285
performance GponOnu ..... 286
performance ip-host ........ 229
performance
mac-bridge ................... 172
performance mgc ............ 174
performance radius.......... 175
performance rtp ....... 176, 230
performance
sip-call-init ............. 177, 230
performance-threshold ..... 289
bridge-port...................... 56
ces................................. 57
dot1x ............................. 58
eth................................. 59
gem ............................... 60
radius............................. 61
pim snooping .................... 27
pon ............................... 279
pon-bandwidth .................. 94
pon-onu-mng........... 127–128
port master-portlist ......... 324
port-location format......... 113
port-protect .................... 306
portid-encrypt................. 113
power-shedding .............. 177
power-switch .................. 293
pppoe-plus ..................... 114
pre-filter ip-host....... 178, 231
pre-filter uni ................... 179
pre-filter uplink ............... 180
priority........................... 309
Protect-time ................... 322
protection group.............. 248
protection prop ............... 249
protection switch-command ........................... 250
protection sync-data ........ 251
psn................................ 272
pw................................. 270
pw delete ....................... 181
pw ethernet .................... 181
pw ip ............................. 182
pw optional..................... 183
pw rtp............................ 184
pw tdm .......................... 185
pw-profile......................... 62
pwmode ......................... 115
Q
qos-mgmt ...................... 115
R
range......... 96, 116, 267, 304
331
range-mode...................... 96
rate-limit igmp .................. 64
register ............................ 97
reset................................ 98
retry-link-detect .............. 323
revertive ........................ 322
revision..............................3
rmon collection history ..... 311
rmon collection
statistics ....................... 310
S
scb-port-mode .................. 69
schedule-mode ................. 76
sdhprot .......................... 275
sdhprot group ................. 259
sdhprot prop............ 260, 276
sdhprot switch-command .................... 260, 276
show allocid.................... 119
show ces global-prop ....... 259
show ces interface ........... 270
show ces pw count .......... 274
show ces pw prop ............ 274
show ces sdhprot group
count ........................... 261
show ces sdhprot group
prop ............................. 262
show ces sdhprot
request......................... 263
show ces sdhprot
switch-command............ 262
show ces sdhprot
sync-data...................... 263
show ces tdm-profile........ 257
show dial-plan .................. 87
show dial-plan-table .......... 87
show eth-switch .............. 315
show eth-switch
vlan-limit ...................... 315
show fec .......................... 99
show gpon dial-plan........... 77
show gpon dial-plan-table ................................. 77
show gpon filter-rule.......... 78
show gpon flood-broadcast................................ 78
show gpon olt allocid ......... 99
show gpon olt
broadcast-bandwidth ...... 101
show gpon olt
dot1p-to-queue-map ...... 102
show gpon olt flood
bandwidth ..................... 100
show gpon olt multicast
bandwidth ..................... 100
show gpon olt
pon-bandwidth .............. 103
show gpon olt portid ........ 104
332
show gpon olt
range-mode .................. 104
show gpon olt
schedule-mode .............. 102
show gpon olt
weigh-mgmt.................. 103
show gpon onu
baseInfo ....................... 121
show gpon onu
detail-info ..................... 122
priority-regeneration
configuration ................. 120
statistic ........................ 122
show gpon onu
state ..................... 120, 123
show gpon onu tcont........ 125
show gpon onu uncfg ....... 123
show gpon onu
update-status ................ 126
show gpon onu
version-running ............. 126
show gpon onu
weightmgmt .................. 124
bridge-port...................... 79
show gpon performance-threshold ces ........ 79
show gpon performance-threshold dot1x ..... 80
show gpon performance-threshold eth ........ 80
show gpon performance-threshold gem ....... 81
show gpon performance-threshold radius..... 82
show gpon profile .............. 85
show gpon profile
bandwidth ....................... 82
show gpon profile traffic ..... 82
show gpon pw-profile ......... 83
show gpon rate-limit
igmp .............................. 83
bridge .......................... 193
bridge-port.................... 194
bridge-port host-bind...... 240
bridge-port ip-host ......... 241
bridge-port uplink .......... 194
device .......................... 195
distance........................ 195
Index
dot1x ........................... 196
dot1x ethuni.................. 196
ex-vlan bridge-port
uni ............................... 197
ex-vlan bridge-port
uplink ........................... 198
ex-vlan eth.................... 198
uni ............................... 199
uplink ........................... 199
ex-vlan-table eth ........... 200
interface ces.................. 201
interface dot1p-mapper
eth............................... 201
interface dot1p-mapper
uplink ........................... 202
interface eth.................. 202
interface pon ................. 203
interface pots ................ 241
interface video............... 205
interwork ...................... 205
ip-host ......................... 242
mac-filter ...................... 204
ip-host .................. 206, 243
uni ............................... 206
uplink ........................... 207
performance call-ctrl ...... 212
performance ces ............ 208
performance eth ............ 208
performance gem........... 210
performance ip-host ....... 211
performance
mac-bridge ................... 210
performance rtp............. 212
performance
sip-call-init .................... 213
power-shedding ............. 214
pre-filter ip-host ............ 243
pre-filter uni .................. 214
pre-filter uplink.............. 215
pw ............................... 216
sip-agent ...................... 244
sip-user ........................ 244
up-queue-map............... 217
vlan-filter ip-host ........... 245
vlan-filter uni................. 217
vlan-filter uplink ............ 218
vlan-filter-mode
ip-host ......................... 246
vlan-filter-mode uni........ 219
vlan-filter-mode
uplink ........................... 219
vlan-tag........................ 220
vlan-tag ip-host ............. 246
voip-ctp ........................ 247
voip-linestatus ............... 247
show gpon
scb-port-mode ................. 76
show gpon treat ................ 84
show gpon virtual-onu ....... 84
show interface ................ 316
show ip dhcp configure....... 40
show ip dhcp proxy
client.............................. 46
show ip dhcp relay server
vclass-id ......................... 45
show ip dhcp server
user ......................... 45, 50
333
show ip dhcp snooping
configure ........................ 35
port ............................... 36
port quota....................... 37
trust............................... 36
vlan ............................... 37
show ip interface ............. 318
all-statistic ...................... 28
all-statistic clear .............. 28
entry .............................. 29
neighbor-info................... 29
port-info ......................... 30
port-statistic clear
interface ......................... 30
port-statistic interface....... 31
show lacp ......................... 24
show monitor session....... 319
show onu running
config ........................... 220
show onu-if .................... 291
show onu-type ................ 291
show onu-type-attr
gpon ............................ 292
show onu-ver.................... 86
show performance olt....... 294
show performance
onu ....................... 125, 294
show portid .................... 127
show protection group
count ........................... 251
show protection group
prop ............................. 251
show protection
request......................... 252
show protection
switch-command............ 252
show protection sync-data
progress-bar ................. 253
show spanning tree
inconsistentports................3
show spanning-tree
instance............................4
show spanning-tree
interface ...........................4
show spanning-tree
statistics ...........................5
show spanning-tree
transparent .......................6
show uaps groupid .......... 325
334
show voip-media-profile ..... 85
shutdown .......... 99, 118, 305
sip-agent proxy-server ..... 231
sip-agent reg-exptime...... 232
sip-agent registrar-server .................... 233
sip-agent rereg-starttime ............................. 233
sip-agent ss.................... 233
sip-agent validate ............ 234
sip-user ......................... 235
smartgroup ...................... 25
smartgroup load-balance............................... 25
sn ................................. 117
spanning-tree .....................7
spanning-tree bpduguard .....7
spanning-tree edged-port .....8
spanning-tree
forward-delay ....................9
spanning-tree guard .......... 10
spanning-tree hello-time..... 10
spanning-tree linktype ....... 11
spanning-tree max-age ...... 12
spanning-tree mcheck........ 12
spanning-tree mode........... 13
spanning-tree mst
configuration ............... 5, 13
spanning-tree mst
hmd5-digest.................... 14
spanning-tree mst
hmd5-key ....................... 14
spanning-tree mst
instance.......................... 16
spanning-tree mst
instance priority............... 15
spanning-tree mst
max-hops ....................... 17
spanning-tree
packet-type..................... 18
spanning-tree
transparent ..................... 18
speed ............................ 305
swap ............................. 323
switch ............................ 323
T
tcont ............................. 117
tdm-profile ..................... 256
tdm-service .................... 273
threshold-profile................ 69
traffic-profile..................... 64
traffic-shape ................... 308
treat ................................ 65
trust-cos ........................ 306
trust-dscp....................... 307
type-name...................... 118
Index
U
uaps-group..................... 321
up-queue-map ................ 186
update onu-version............ 67
V
virtual-onu ....................... 68
vlan-filter ....................... 187
vlan-filter ip-host............. 237
vlan-filter uni .................. 187
vlan-filter uplink .............. 188
vlan-filter-mode .............. 188
vlan-filter-mode
ip-host ......................... 237
vlan-filter-mode uni ......... 190
vlan-filter-mode uplink ..... 190
vlan-tag ......................... 191
vlan-tag ip-host .............. 238
vlan-tag uni .................... 192
vlan-xconnect ................. 119
voip-ctp ......................... 239
voip-media-profile ............. 70
W
weight-mgmt .................... 98
335
336
List of Glossary
AC - Alternating Current
ACL - Access Control List
AES - Advanced Encryption Standard
AIS - Alarm Indication Signal
Alloc-ID - Allocation Identifier
ANI - Access Node Interface
ARC - Alarm Report Control
ARP - Address Resolution Protocol
ATM - Asynchronous Transfer Mode
BER - Bit Error Rate
BPDU - Bridge Protocol Data Unit
CES - Circuit Emulation System
CoS - Class of Service
CPE - Customer Premises Equipment
CTP - Connection Termination Point
CVLAN - Customer Virtual Local Area Network
DCE - Data Communication Equipment
DHCP - Dynamic Host Control Protocol
DHCP - Dynamic Host Configuration Protocol
DNS - Domain Name Server
DSCP - Differentiated Services Code Point
DSL - Digital Subscriber Line
DTE - Data Terminal Equipment
EPON - Ethernet Passive Optical Network
FEC - Forward Error Correction
GEM - GPON Encapsulation Method
GPON - Gigabit Passive Optical Network
IEEE - Institute of Electrical and Electronic Engineers
IGMP - Internet Group Management Protocol
IP - Internet Protocol
IPv4 - Internet Protocol version 4
IPv6 - Internet Protocol version 6
IPX - Internetwork Packet Exchange protocol
LACP - Link Aggregation Control Protocol
MAC - Media Access Control
337
MD5 - Message Digest 5 Algorithm
MGC - Media Gateway Controller
MIB - Management Information Base
MST - Multiple Spanning Tree
MSTP - Multiple Spanning Tree Protocol
MTU - Maximum Transmission Unit
NMS - Network Management System
OLT - Optical Line Terminal
OMCC - ONU Management and Control Channel
ONT - Optical Network Terminal
ONU - Optical Network Unit
ONU - Optical Network Unit
PIM - Protocol Independent Multicast
PON - Passive Optical Network
POTS - Plain Old Telephone Service
PPPoE - Point-to-Point Protocol over Ethernet
PSN - Packet Switch Network
PVC - Permanent Virtual Circuits
PVLAN - Private Virtual Local Area Network
PW - Pseudo Wire
QoS - Quality of Service
RADIUS - Remote Authentication Dial-In User Service
RARP - Reverse Address Resolution Protocol
RFC - Request for Comment
RTP - Real-time Transport Protocol
RTP - Realtime Transport Protocol
SDH - Synchronous Digital Hierarchy
SDH - Synchronous Digital Hierarchy
SES - Severely Errored Second
SIP - Session Initiation Protocol
SONET - Synchronous Optical Network
SP - Strict Priority
SS - SoftSwitch
STM - Synchronous Transport Module
STP - Spanning Tree Protocol
SVLAN - Service Virtual Local Area Network
TCP - Transmission Control Protocol
TDM - Time Division Multiplexing
TPID - Tag Protocol Identifier
338
Glossary
TTL - Time To Live
UAPS - Uplink Auto Protection Switching
UDP - User Datagram Protocol
UNI - User Network Interface
VLAN - Virtual Local Area Network
VoIP - Voice over Internet Protocol
WAN - Wide Area Network
WRR - Weight Round Robin
339

Command Manual (Volume IV)

Transcription

Similar documents