Catalogue - Gradhermetic

Transcription

SUPERGRADHERMETIC
Steerable and coilable blind
INDUSTRIAL GRADHERMETIC, S.A.E
SUPERGRADHERMETIC ®
SUPERGRADHERMETIC is a tubular profiles blind, steerable and coilable, made with a high quality
aluminium alloy, coated with maximum quality coatings and in a continuous furnace dried.
STEE
ST
EERA
EE
RABL
RA
BLE
BL
E
Slats orientation can be chosen up
to 120º.
By night cool air is avoided, getting
an efficient insulation with the blind
in closed position.
COIL
CO
ILAB
IL
ABLE
AB
LE AND STE
TEER
ERAB
ER
ABLE
AB
LE
Slats go up and down until they reach
a perfect closure.
In winter, the sun heat goes inside,
keeping intimacy at its maximum
orientation position.
Exterior coiling
02 / SUPERGRADHERMETIC®
Interior coiling
www.gradhermetic.com
CHAR
CH
ARAC
AR
ACTE
AC
TERI
TE
RIST
RI
STIC
ST
ICS
IC
S
SLATS ORIENTATION
Slats orientation gives a perfect light regulation.
Total discretion. Thanks to slats orientation, air can go inside and there’s no
vision from outside.
The different technical solutions and profiles design for interior and exterior
coiling make its installation to be really easy.
TIGHT CLOSURE
When the blind is hermetically closed, a complete darkness is reached thanks to
the perfect clamping of its blades.
In the same way, the blind can be fully rolled up leaving the window totally free.
Thanks to its double wall profile, we get power savings and domestic comfort.
ENERGY EFFICIENCY
Supergradhermetic: Environment-friendly. In winter Supergradhermetic blind
gets a heating saving between a 5 and 10%. In summer, cooling saving can
reach 40%.
This blind improves window thermal transmission coefficient (K).
Supergradhermetic strengthen buildings sustainability.
SAFETY
Safety against external factors, such us climate factors (wind, snow, rain,..) and
even a robbery.
In this last case, safety can be improved by installing an authomatic latch.
The steady profile is designed to get a a perfect slats closure when the blind is
closed.
COLOURS RANGE
Gradcolors colours chart has the most representive colours of our range.
This chart is formed by RAL, N.C.S. and Rollicolor colours.
On request, we can manufacture Supergradhermetic blinds in any colour.
PROFILES
A c co rd
Acco
Ac
rdi
d in
i n g to
ing
t o i ts
t s a pp
pplililica
cati
ca
tion
ti
on i n th
the
e fo
f o llllow
foll
owiin
ow
i n g pr of
ing
ofil
f ililes
es::
es
SUPE
SU
PER
PE
R -CL
CLAS
CL
ASSI
AS
SIC
SI
C
Tubular steerable slats of flat profile
aluminium, 45,5 mm of height, 14,3
mm of thickness, manufactured in
aluminium alloy, for interior and
exterior coiling and in a continuous
furnace coated.
INTE
IN
TERI
TE
RIOR
RI
OR S UP
UPER
ER-NOV
N OV
OVA
A
Tubular steerable slats of curved
profile aluminium, filled with polyuretane foam, 45,5 mm of height,
12,5 mm of thickness, manufactured
in aluminium alloy, for interior coiling
and in a continuous furnace coated.
* Available in extruded profile.
*
EXTE
EX
TERI
TE
RIOR
RI
OR S UP
UPER
ER-NOV
N OV
OVA
A
Tubular steerable slats of curved
profile aluminium, filled with polyuretane foam, 45,5 mm of height,
12,5 mm of thickness, manufactured in aluminium alloy, for exterior
coiling and in a continuous furnace
coated.
DRIV
DR
IVIN
IV
ING
IN
G
SUPERGRADHERMETIC blind can have a motor in any of its applications:
• Wire application: With its ISG specific motors.
• Wireless application: With SGH IO new motors.
Both technologies, ISG and IO can have general controls, subgroups,
and be adapted to solar cells.
The new SGH IO motor uses IO-homecontrol®, the new safe wireless
communication platform, used by the main home devices manufacturers.
Thanks to IO-homecontrol®, all confort and safety devices are communicated among them and can be controlled from only one driving point.
Blind opening and closing hours can be programmed, as well as light
intensity making the blind to orientate automatically.
With IO system, there is a predetermined slats position called “favourite
position”, which is different from flat slats position and can be chosen
according user’s wish.
ISG system has a predetermined opening position for maximum
orientation.
The driving, apart from electrical, can be with a tape, crank or oscillant
rod.
TRADIT
T IONAL APP
P LICATION
In Gradhermetic’s traditional application, SUPERGRADHERMETIC is supplied with the required guides
and devices (tape, motor,...) to be installed in the work execution
COILINGS WITH SHAFT 65 MM OF DIAMETER (Measures in mm)
A
0 to 800
810 to 1300
1310 to 1900
1910 to 2200
2210 to 2600
Type
I
II
III
I
II
III
I
II
III
I
II
III
I
II
III
L1
200
200
180
250
240
210
285
260
245
305
270
255
330
300
265
H
240
235
235
270
265
265
300
280
295
310
290
305
330
310
315
B
110
110
90
135
125
110
150
140
120
160
140
130
170
155
135
D
90
100
90
115
115
100
135
120
125
145
130
125
160
145
130
E
100
100
85
120
110
105
135
125
120
145
130
125
150
145
135
I - Super-classic
II - Interior Super-nova
III - Exterior Super-nova
* The guide pitch must be at
least 45 mm.
Indicate
measure of
(x) mark
Exterior coiling
Indicate
measure of
(x) mark
Interior coling
Descriptive proceedings
Technical file / CAD
Consult web site
Measures in mm
1 - Narrow guide specially designed
to be fitted in wood carpentry.
2 - Wide guide for metal carpentries
and direct to wall.
3 - Intermediate bearer detail.
Bearing required space.
Maximum width (max. L) of
manufacturing:
Super-classic - 2750 mm
Super-nova - 2500 mm
Maximum height - 2600 mm
Maximum area - 6,3 m²
Interior coiling
Exterior coiling
To get a perfect blind installation in the work, blind frame and guides will be installed before the carpentry. In case to be
necessary to carry out the installation after the carpentry, it’s important to foresee the needed space for guides. Depending
on work characteristics, and for better space use, it will be able to be installed with interior and exterior coiling.
C OMPA
A CT APPLIC
C ATION
In Compact application, Gradhermetic supplies Supercomplet system composed of
SUPERGRADHERMETIC blind motor driven, with extruded aluminium box, frames and wriggle, forming
a closed ring with thermal bridge prepared to be adapted to the carpentry.
DIMENSIONS
H DRAWER
(mm)
205
250
Supercomplet installation is done when
the general work is almost finished.
280
A
HT
A
HT
A
HT
INTERIOR SUPERCLASSIC
-
-
1630
1880
2460
2740
EXTERIOR SUPERCLASSIC
-
-
1690
1940
2460
2740
INT. SUPERNOVA L< 1400 mm
1140
1345
2240
2490
2600
2880
INT. SUPERNOVA 1400 < L< 2500 mm
1030
1235
2185
2435
2600
2880
EXT. SUPERNOVA L< 1400 mm
-
-
2240
2490
2600
2880
EXT. SUPERNOVA 1400 < L< 2500 mm
-
-
2185
2435
2600
2880
Acoustical insulation to environmental
noise RA=30,6 dBA; RW=31 dB
Thanks to be a finished product, it
needn’t bricklayer work.
Thermal transmission U=2,51 W/m2K
Air permeability: Class 4
Water proofness: Class E1950
Consult web site
Interior coiling
Exterior coiling
Measures in mm
Depending on work features and for a
better installation spaces use, it will be
supplied both interior or exterior coiling.
Interior coiling: (M) Adaptable frame to
carpentries up to 198 mm.
Exterior coiling: (M) Adaptable frame to
carpentries up to 78 mm.
Maximum manufacturing width
(L max): 2500 mm.
Interior coiling
Exterior coiling
To get a perfect kit installation in the work, firstly we’ll place Supercomplet in the
hole’s pre-frame and afterwards we’ll install the carpentry and joint cover profile.
R ENOV
VATION APP
P LICATION
In its renovation application Gradhermetic supplies Superbloc system which is composed of
SUPERGRADHERMETIC blind motor driven, its box, guides and required devices to be installed in
work.
DIMENSIONS
205
H DRAWER
(mm)
250
300
A
HT
A
HT
A
HT
1300
1505
1960
2210
2600
2900
1300
1505
2100
2350
2600
2900
1465
1670
2515
2765
2600
2900
1415
1620
2240
2490
2600
2900
1491
1696
2600
2880
2600
2900
1436
1641
2534
2784
2600
2900
Adaptability:
Thanks to its various solutions, it can
be easily adapted to any opening.
Easy installation ; Without bricklayer
work and very simple to take measures.
Optional working: Available with wall
control o wireless driving control.
Consult web site
Ext. coiling: Inside-wall
Int. coiling: Inside-wall
Ext. coiling: outside-wall
L max.
73
67
73
67
L max.
73
67
73
67
Measures in mm
Available in simple aluminium box both
square or round.
*Round box: Only available in 250mm
for exterior coiling.
Maximum manufacturing with for both
boxes (L max): 2500 mm.
Square box
Round box*
Superbloc installation is very easy and done afterwards. Very simple to take
measures and without bricklayer work are its main features, and thanks to its
various applications, it can be adapted to any opening.
TUNNE
E L APPLICA
AT ION
In tunnel application, Gradhermetic supplies SUPERGRADHERMETIC blind with guides and needed
devices to be installed in premanufactured tunnel boxes.
DIMENSIONS
H DRAWER
H = 300 mm
L1 = 280 mm
L1 = 300 mm
A
HT
A
HT
1500
1800
1806
2106
1500
1800
1806
2106
1865
2165
1865
2545
1865
2165
1865
2545
1865
2165
2245
2545
1865
2165
2245
2545
Installation advantages:
- Thermal and acoustical insulation:
It exceeds acoustical insulation standards > 40dB.
- Versatile
- Economical
- Light
- Lasting
Supergradhermetic blind installation inside the tunnel is done when this last
element is fully finished in the work and
after carrying out all bricklayer works.
Adaptable to other market tunnel box
measures.
Consult web site
Tunnel Box 280x300 mm
Tunnel Box 300x300 mm
69
37
69
37
L max.
Measures in mm
Two box standard sizes exist: 280x300
mm and 300x300 mm.
Tunnel application is compatible with
market tunnel boxes.
Maximum height - 2600 mm
Maximum area - 6,3 m²
Maximum manufacturing width
(L max) :
Super-classic - 2750 mm
Super-nova - 2500 mm
Box location
Top installation
To get a perfect kit installation in the work, we’ll firstly install the box into the wall hole, and once it is fitted, we’ll install guides
and blind frame before metal carpentry. In case the installation is required after the carpentry, it’s important to foresee the
required space for guides.
NOTE:
Headquaters and factory: Avda. Béjar, 345
08226 Terrassa – Barcelona (Spain)
Tél. +34 93 735 44 08
Fax. +34 93 735 65 43
www.gradhermetic.com [email protected]
Delegations:
Barcelona Tel. +34 93 219 47 00 / Madrid Tel : +34 91 641 21 12 / Bilbao Tel. +34 94 671 13 18 /
Sevilla Tel. +34 95 563 04 51 / Valencia Tel. +34 96 369 64 13 / Valladolid Tel. +34 986 26 30 12 /
Malaga Tel. +34 952 23 98 77 / Zaragoza Tel. +34 976 125 070 / Vigo Tel. +34 986 26 30 21
COD-966454 - Ed. 05/2014
International division :
France Tel. +33 1 609 13 377 / Italy Tel. +393 663 14 68 / Morocco Tel. +212 661 14 60 20

Catalogue - Gradhermetic

Transcription

Similar documents

How To Measure For Replacement Vertical Blind Slats

igloo coolers cut sheet

TRIPLE SEVEN

www.alubond.com Aluminium composite panels for facade cladding

Amedore NEW - Amedore Homes

wt waggoner building

Criniti`s Newc_Concept_A 04.05.15.ai

Home2_LuxuryHomeTour_Nor-Son

Project Gomez´s House Location site Spain , Almería , La Almerdina

PDF version - Palaeontologia Electronica